From 4aed2c8219774f5d797760606b8489a92ddc5163 Mon Sep 17 00:00:00 2001 From: toma Date: Wed, 25 Nov 2009 17:56:58 +0000 Subject: Copy the KDE 3.5 branch to branches/trinity for new KDE 3.5 features. BUG:215923 git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdebase@1054174 283d02a7-25f6-0310-bc7c-ecb5cbfe19da --- doc/kinfocenter/samba/Makefile.am | 4 + doc/kinfocenter/samba/index.docbook | 207 ++++++++++++++++++++++++++++++++++++ 2 files changed, 211 insertions(+) create mode 100644 doc/kinfocenter/samba/Makefile.am create mode 100644 doc/kinfocenter/samba/index.docbook (limited to 'doc/kinfocenter/samba') diff --git a/doc/kinfocenter/samba/Makefile.am b/doc/kinfocenter/samba/Makefile.am new file mode 100644 index 000000000..91de8fa54 --- /dev/null +++ b/doc/kinfocenter/samba/Makefile.am @@ -0,0 +1,4 @@ + +KDE_LANG= en +KDE_DOCS = kinfocenter/samba + diff --git a/doc/kinfocenter/samba/index.docbook b/doc/kinfocenter/samba/index.docbook new file mode 100644 index 000000000..37b14c48c --- /dev/null +++ b/doc/kinfocenter/samba/index.docbook @@ -0,0 +1,207 @@ + + + +]> + +
+Samba Status Information + + +&Alexander.Neundorf; + + + +2002-02-12 +3.00.00 + + +KDE +KControl +Samba +system information + + + + + + +Samba Status Information + +The Samba and NFS Status Monitor is a front end +to the programs smbstatus and +showmount. Smbstatus reports on current Samba +connections, and is part of the suite of Samba tools, which implements +the SMB (Session Message Block) protocol, also called +the NetBIOS or LanManager protocol. + +This protocol can be used to provide printer sharing or drive +sharing services on a network including machines running the various +flavors of &Microsoft; &Windows;. + +showmount is part of the NFS +software package. NFS stands for Network File System +and is the traditional &UNIX; way to share folders over the +network. In this case the output of showmount + is parsed. On some systems showmount is in +/usr/sbin, check if you have +showmount in your PATH. + + +Exports + +On this page you can see a big list which shows the currently +active connections to Samba shares and NFS exports of +your machine. The first column shows you whether the resource is a Samba +(SMB) share or a NFS export. The +second column contains the name of the share, the third the name of the +remote host, which accesses this share. The remaining columns have only +a meaning for Samba-shares. + +The fourth column contains the User ID of the +user, who accesses this share. Note that this does not have to be equal +to the &UNIX; user ID of this user. The same applies +for the next column, which displays the group ID of the +user. + +Each connection to one of your shares is handled by a single +process (smbd), the next column shows the process +ID (pid) of this +smbd. If you kill this process the connected user +will be disconnected. If the remote user works from &Windows;, as soon +as this process is killed a new one will be created, so he will almost +not notice it. + +The last column shows how many files this user has currently open. +Here you see only, how many files he has open just +now, you don't see how many he copied or formerly opened &etc; + + + + +Imports + + Here you see which Samba- and NFS-shares from +other hosts are mounted on your local system. The first column shows +wether it is a Samba- or NFS-share, the second column +displays the name of the share, and the third shows where it is +mounted. + +The mounted NFS-shares you should see on +&Linux; (this has been tested), and it should also work on &Solaris; +(this has not been tested). + + + + +Log + +This page presents the contents of your local samba log file in a +nice way. If you open this page, the list will be empty. You have to +press the Update button, then the samba log file +will be read and the results displayed. Check whether the samba log file +on your system is really at the location as specified in the input +line. If it is somewhere else or if it has another name, correct +it. After changing the file name you have to press +Update again. + +Samba logs its actions according to the log level (see +smb.conf). If loglevel = 1, samba logs only when +somebody connects to your machine and when this connection is closed +again. If log level = 2, it logs also if somebody opens a file and if he +closes the file again. If the log level is higher than 2, yet more +stuff is logged. + +If you are interested in who accesses your machine, and which +files are accessed, you should set the log level to 2 and regularly +create a new samba log file (⪚ set up a cron task +which once a week moves your current samba log file into another +folder or something like that). Otherwise your samba log file may +become very big. + +With the four checkboxes below the big list you can decide, which +events are displayed in the list. You have to press +Update to see the results. If the log level of +your samba is too low, you won't see everything. + +By clicking on the header of one column you can sort the list by +this column. + + + + + +Statistics + +On this page you can filter the contents of the third page for +certain contents. + +Let's say the Event field (not the one in the +list) is set to Connection, +Service/File is set to *, +Host/User is set to *, +Show expanded service info is disabled and +Show expanded host info is disabled. + +If you press Update now, you will see how +often a connection was opened to share * (&ie; to any +share) from host * (&ie; from any host). Now enable +Show expanded host info and press +Update again. Now you will see for every host +which matches the wildcard *, how many connections +were opened by him. + +Now press clear. + +Now set the Event field to File Access and +enable Show expanded service info and press +Update again. + +Now you will see how often every single file was accessed. If you +enable Show expanded host info too, you will see +how often every single user opened each file. + +In the input lines Service/File and +Host/User you can use the wildcards +* and ? in the same way you use +them at the command line. Regular expressions are not +recognized. + +By clicking on the header of a column you can sort the list by +this column. This way you can check out which file was opened most +often, or which user opened the most files or whatever. + + + + + +Section Author + +Module copyright 2000: Michael Glauche and &Alexander.Neundorf; &Alexander.Neundorf.mail; + +Originally written by: Michael Glauche + +Currently maintained by: &Alexander.Neundorf; &Alexander.Neundorf.mail; + + +Contributors +Conversion to kcontrol applet: +&Matthias.Hoelzer-Kluepfel; &Matthias.Hoelzer-Kluepfel.mail; +Use of KProcess instead of popen, and more error checking: +&David.Faure; &David.Faure.mail; +Conversion to kcmodule, added tab pages 2,3,4, bug +fixed: +&Alexander.Neundorf; &Alexander.Neundorf.mail; + + +Documentation copyright 2000 &Alexander.Neundorf; &Alexander.Neundorf.mail; + +Documentation translated to docbook by &Mike.McBride; &Mike.McBride.mail; + + + + + + +
\ No newline at end of file -- cgit v1.2.1