path: root/r14-xdg-update

#!/bin/sh
#
# A script to perform R14.0.0 XDG compliance updates.
# This script should be needed to run only once.

SCRIPT_NAME="`basename \`readlink -f $0\``"

# TODO: Do we need to trap whether the user is running this script while
#       in a Trinity session? Most files can be updated "live" but some can't,
#       such as kdeglobals.

# Allow forced execution of this script regardless of the kdeglobals setting.
if [ "$1" = "force" ]; then
  FORCE="true"
fi

# TODO: As the user should not be logged into a Trinity session when running
#       this script, or an administrator might run this script remotely, the
#       $TDEHOME variable probably is not set or knowable from within this script.
#       We presume $HOME/.trinity, but should provide a way to pass a command line
#       parameter to change that location.
PROFILE_DIR="$HOME/.trinity"
CACHE_DIR="$PROFILE_DIR/cache-`uname -n`"

# TODO: How to handle environments where files/directories are locked
#       administratively and can't be updated. The nominal validation checks
#       in this script provide some notice but no direct remedy.

# The binaries for TDE are located in the same place as this script.
# To determine that location use the following method rather than presuming
# the existence of $TDEDIR. That environment variable might not be
# defined or defined to point to KDE4 binaries.
BIN_DIR="`dirname \`readlink -f $0\``"
if [ -x $BIN_DIR/tde-config ]; then
  TDEDIR=${BIN_DIR%/bin}
else
  echo "[r14-xdg-update] Unable to determine TDE base directory."
  echo "[r14-xdg-update] This script should be installed in the same directory."
  echo "[r14-xdg-update] Exiting."
  exit 1
fi
unset BIN_DIR

unset KDEGLOBALS_KEY_VALUE

Wait_For_Response () {
unset response
# -r Backslash does not act as an escape character.
# -p Display "PROMPT" without a trailing newline, before attempting to read any input.
while true; do
  read -r -p "$1 (y/n): " yn
  case $yn in
    [Yy]* ) response=y; break;;
    [Nn]* ) response=n; break;;
    * ) echo "Please answer yes (y/Y) or no (n/N).";;
  esac
done
}

Proceed_From_Response () {
if [ "$response" = "n" -o "$response" = "N" ]; then
  echo "Exiting."
  echo
  exit 0
else
  echo "Continuing."
  echo
fi
}

Display_Message () {
if [ "$DISPLAY" != "" ]; then
  echo -e "$MESSAGE" | xmessage -center -file - > /dev/null 2>/dev/null
else
  echo -e "$MESSAGE"
fi
}

Message_Prefix () {
if [ "$DISPLAY" != "" ]; then
  echo -n "[r14-xdg-update] "
fi
}

Validation_Failure () {
Display_Message "$MESSAGE"
if [ "$KDEGLOBALS_KEY_VALUE" = "" ]; then
  KDEGLOBALS_KEY_VALUE="$TEST_NUM"
else
  KDEGLOBALS_KEY_VALUE="$KDEGLOBALS_KEY_VALUE;$TEST_NUM"
fi
}

# Do not update when $TDEHOME is a sym link to another profile directory. Trinity should have
# full reign within its own profile directory (limited to administrative locking), but the error
# check is a conservative approach.
TDEHOME_LINK="`readlink \"$PROFILE_DIR\"`"
if [ "$TDEHOME_LINK" != "" ]; then
  # Force this entry to ensure the updates eventually are performed should the user copy the
  # original kdeglobals file into a new Trinity profile.
  $TDEDIR/bin/kwriteconfig --file kdeglobals --group "R14 XDG Updates" --key Updated --type bool 'false'
  # Are we in X? Display an X dialog explaining breakage.
  if [ "$DISPLAY" != "" ]; then
    echo "[r14-xdg-update] Warning! The profile directory $PROFILE_DIR is a" 1>&2
    echo "                    sym link to $TDEHOME_LINK!" 1>&2
    echo "                    R14 updates will not be performed because Trinity needs its own separate profile directory." 1>&2
    echo "                    Without R14 updates some Trinity apps will fail to function correctly." 1>&2
  fi
  MESSAGE="Oops! The profile directory $PROFILE_DIR is a sym link to $TDEHOME_LINK.\n\nTrinity R14 XDG compliance updates will not be performed because\nTrinity needs its own separate profile directory.\n\nWithout R14 XDG compliance updates, some Trinity apps will fail to\nfunction properly.\n\nFailures include the following:\n\n* Many left-side icon lists will not populate,\n  such as the Panel and Konqueror configuration dialogs.\n\n* User-defined keyboard shortcuts fail (khotkeysrc).\n  System defined shortcuts remain functional.\n\n* User-defined app preferences fail (profilerc).\n\n* Konqueror navigation/sidebar panel won't open.\n\n* User-defined konqueror service menus, kicker customization,\n  konqueror sidebar, Recent Documents list fail.\n\nPossible remedies:\n\n* If necessary contact your system administrator.\n\n* Break the sym link to allow Trinity to create a fresh Trinity profile.\n\n* Use the migratekde3 script to migrate a KDE3 profile to Trinity."
  # Are we in X? Display an X dialog explaining breakage.
  if [ "$DISPLAY" != "" ]; then
    echo -e "$MESSAGE" | xmessage -center -file - -buttons Continue,Quit > /dev/null 2>/dev/null
    if [ "$?" = "102" ]; then
      # User select the Quit button: quit this script.
      unset PROFILE_DIR
      unset TDEHOME_LINK
      exit 1
    fi
  else
    echo
    echo -e "$MESSAGE"
    echo
    Wait_For_Response "Break the sym link now and migrate the $TDEHOME_LINK profile to a new Trinity profile?"
    Proceed_From_Response
    unlink "$HOME/.trinity" 2>/dev/null
    if [ "`readlink \"$HOME/.trinity\"`" != "" ]; then
      echo "Unable to break the sym link. Check your file and directory privileges. Quitting."
      unset PROFILE_DIR
      unset TDEHOME_LINK
      exit 1
    else
      sh $TDEDIR/bin/migratekde3
      echo
    fi
  fi
fi

R14_UPDATED="`$TDEDIR/bin/kreadconfig --file kdeglobals --group "R14 XDG Updates" --key Updated`"
if [ "$R14_UPDATED" != "true" ] || [ "$FORCE" = "true" ]; then
  if [ "$R14_UPDATED" != "true" ] && [ "$R14_UPDATED" != "false" ] && [ "$R14_UPDATED" != "" ]; then
    Message_Prefix
    echo "The r14-xdg-update script has been run at least once."
    Message_Prefix
    echo "The error code is $R14_UPDATED."
    MESSAGE="The r14-xdg-update script has been run at least once.\n\nThe script is not successfully updating.\n\nThe script will run with each login until corrected.\n\nPlease contact an administrator or take appropriate\nadmininstrative action to correct the problem.\n\nThe error code is $R14_UPDATED."
    # Are we in X? Display an X dialog explaining breakage.
    if [ "$DISPLAY" != "" ]; then
      echo -e "$MESSAGE" | xmessage -center -file - -buttons Continue,Quit > /dev/null 2>/dev/null
      if [ "$?" = "102" ]; then
        # User select the Quit button: quit this script.
        unset PROFILE_DIR
        unset R14_UPDATED
        unset TDEHOME_LINK
        exit 1
      fi
    fi
  fi
  Message_Prefix
  echo "Performing a profile update for Trinity release R14 XDG compliance."
  Message_Prefix
  echo "Updating *.desktop files."
  find "$PROFILE_DIR" -name "*.desktop" -exec sed -i 's|X-KDE-|X-TDE-|g' {} \; 2>/dev/null
  find "$PROFILE_DIR" -name "*.desktop" -exec sed -i 's|KDE\;|TDE\;|g' {} \; 2>/dev/null
  find "$HOME/.local" -name "*.desktop" -exec sed -i 's|X-KDE-|X-TDE-|g' {} \; 2>/dev/null
  find "$HOME/.local" -name "*.desktop" -exec sed -i 's|KDE\;|TDE\;|g' {} \; 2>/dev/null
  Message_Prefix
  echo "Updating references of $TDEDIR/share/applications/kde to share/applications/tde."
  # Exclude KMail mail files --- we don't want to touch those files.
  find "$PROFILE_DIR" -path "$PROFILE_DIR/share/apps/kmail/mail" -prune -o -type f -exec sed -i "s|$TDEDIR/share/applications/kde|$TDEDIR/share/applications/tde|g" {} \; 2>/dev/null

  # Preserve keyboard shortcuts and input actions.
  Message_Prefix
  echo "Updating user-defined keyboard shortcuts in khotkeysrc."
  sed -i 's|CommandURL=kde-|CommandURL=tde-|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  sed -i 's|K Menu - kde-|TDE Menu - tde-|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  sed -i 's|Name=K Menu|Name=TDE Menu|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  sed -i 's|in KDE stands|in TDE stands|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  sed -i 's| use KDE| use TDE|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  Message_Prefix
  echo "Updating some text strings in khotkeysrc."
  sed -i 's|Go to KDE Website|Go to TDE Website|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  sed -i 's|www\.kde\.org|www\.trinitydesktop\.org|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  sed -i 's|KDE3\.1|TDE|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  sed -i 's|kde32b1|trinity2b1|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  sed -i 's|kde321|trinity21|g' "$PROFILE_DIR/share/config/khotkeysrc" 2>/dev/null
  # Fix the some of the same text strings in kglobalshortcutsrc.
  Message_Prefix
  echo "Updating some text strings in kglobalshortcutsrc."
  sed -i 's|Go to KDE Website|Go to TDE Website|g' "$PROFILE_DIR/share/config/kglobalshortcutsrc" 2>/dev/null
  sed -i 's|www\.kde\.org|www\.trinitydesktop\.org|g' "$PROFILE_DIR/share/config/kglobalshortcutsrc" 2>/dev/null
  sed -i 's|KDE3\.1|TDE|g' "$PROFILE_DIR/share/config/kglobalshortcutsrc" 2>/dev/null

  # Preserve app preferences.
  Message_Prefix
  echo "Updating user-defined app preferences in profilerc."
  sed -i 's|Application=kde-|Application=tde-|g' "$PROFILE_DIR/share/config/profilerc" 2>/dev/null

  # Preserve kicker/panel icons.
  Message_Prefix
  echo "Updating kicker/panel customizations in kickerrc."
  sed -i 's|StorageId\[\$e\]=kde-|StorageId\[\$e\]=tde-|g' "$PROFILE_DIR/share/config/kickerrc" 2>/dev/null

  # Preserve Quick Launch icons.
  # There should only be one configuration file, but old KDE3 remnant files might exist ofr users who
  # migrated from KDE3. We don't care about those files, but we still need to update the correct configuration file.
  QUICK_LAUNCH_CONFIG="`grep launcher_panelapplet $PROFILE_DIR/share/config/kickerrc | awk -F = '{print $2}'`"
  if [ "$QUICK_LAUNCH_CONFIG" != "" ]; then
    Message_Prefix
    echo "Updating Quick Launch applet."
    sed -i 's|,kde-|,tde-|g' "$PROFILE_DIR/share/config/$QUICK_LAUNCH_CONFIG" 2>/dev/null
  fi

  # Update sym link files in $HOME/.trinity/Autostart.
  ( cd "$PROFILE_DIR/Autostart"
    Message_Prefix
    echo "Updating Autostart files."
    for i in `find . -type l`; do
      LINK="`readlink $i`"
      LINK_PATH="`dirname $LINK`"
      LINK_NAME="`basename $LINK`"
      if [ -n "`echo $LINK_PATH | grep \"$TDEDIR/share/applications/kde\"`" ]; then
        NEW_LINK_PATH="`echo \"$LINK_PATH\" | sed 's|/share/applications/kde|/share/applications/tde|'`"
      fi
      unlink $i
      ln -sf "$NEW_LINK_PATH/$LINK_NAME" "$LINK_NAME"
      if [ "$?" != "0" ]; then
        Message_Prefix
        echo "There was an error with creating a new sym link for $LINK." 1>&2
        KDEGLOBALS_KEY_VALUE="autostart"
      fi
    done
  )

  # Update the user's customized menu.
  if [ -r $HOME/.config/menus/applications-kmenuedit.menu ]; then
    sed -i 's|<Filename>kde-|<Filename>tde-|g' $HOME/.config/menus/applications-kmenuedit.menu
  fi

  # Perform some nominal update validations.
  # First clean house from any previous failures.
  rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test*.txt
  # This first test includes *.desktop files in the profile Autostart directory.
  TEST_NUM="1"
  R14_UPDATE_TEST1="`find \"$PROFILE_DIR\" -name \"*.desktop\" -exec grep \"X-KDE\" {} \; &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
  if [ "$R14_UPDATE_TEST1" != "" ]; then
    MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check *.desktop files for 'X-KDE' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
    Validation_Failure
  else
    rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
  fi
  TEST_NUM="2"
  R14_UPDATE_TEST2="`find \"$PROFILE_DIR\" -name \"*.desktop\" -exec grep -q \"KDE;\" {} \; &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
  if [ "$R14_UPDATE_TEST2" != "" ]; then
    MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check *.desktop files for 'KDE;' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
    Validation_Failure
  else
    rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
  fi
  TEST_NUM="3"
  R14_UPDATE_TEST3="`find \"$PROFILE_DIR\" \"$PROFILE_DIR/share/apps/kmail/mail\" -prune -o -type f -exec grep -q \"$TDEDIR/share/applications/kde\" {} \; &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
  if [ "$R14_UPDATE_TEST3" != "" ]; then
    MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check files for '$TDEDIR/share/applications/kde' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
    Validation_Failure
  else
    rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
  fi
  TEST_NUM="4"
  R14_UPDATE_TEST4="`grep -q \"CommandURL=kde-\" \"$PROFILE_DIR/share/config/khotkeysrc\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
  if [ "$R14_UPDATE_TEST4" != "" ]; then
    MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check khotkeysrc for 'CommandURL=kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
  else
    rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
  fi
  TEST_NUM="5"
  R14_UPDATE_TEST5="`grep -q \"K Menu - kde-\" \"$PROFILE_DIR/share/config/khotkeysrc\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
  if [ "$R14_UPDATE_TEST5" != "" ]; then
    MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check khotkeysrc for 'K Menu - kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
    Validation_Failure
  else
    rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
  fi
  TEST_NUM="6"
  R14_UPDATE_TEST6="`grep -q \"Application=kde-\" \"$PROFILE_DIR/share/config/profilerc\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
  if [ "$R14_UPDATE_TEST6" != "" ]; then
    MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check profilerc for 'Application=kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
    Validation_Failure
  else
    rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
  fi
  TEST_NUM="7"
  R14_UPDATE_TEST7="`grep -q \"StorageId\[\$e\]=kde-\" \"$PROFILE_DIR/share/config/kickerrc\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
  if [ "$R14_UPDATE_TEST7" != "" ]; then
    MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check kickerrc for 'StorageId[$e]=kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
    Validation_Failure
  else
    rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
  fi
  if [ "$QUICK_LAUNCH_CONFIG" != "" ]; then
    TEST_NUM="8"
    R14_UPDATE_TEST8="`grep -q \"kde-\" \"$PROFILE_DIR/share/config/$QUICK_LAUNCH_CONFIG\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
    if [ "$R14_UPDATE_TEST8" != "" ]; then
      MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check $QUICK_LAUNCH_CONFIG for 'kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
      Validation_Failure
    else
      rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
    fi
  fi
  if [ -r $HOME/.config/menus/applications-kmenuedit.menu ]; then
    TEST_NUM="9"
    R14_UPDATE_TEST9="`grep -q \"<Filename>kde-\" \"$HOME/.config/menus/applications-kmenuedit.menu\" &>${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt`"
    if [ "$R14_UPDATE_TEST9" != "" ]; then
      MESSAGE="Some Trinity profile R14 XDG compliance updates failed.\n\n(Check applications-kmenuedit.menu for '<Filename>kde-' in\n${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt.)"
      Validation_Failure
    else
      rm -f ${CACHE_DIR}/${SCRIPT_NAME}-test${TEST_NUM}.txt
    fi
  fi
  if [ "$R14_UPDATE_TEST1" = "" ] && [ "$R14_UPDATE_TEST2" = "" ] && [ "$R14_UPDATE_TEST3" = "" ] \
    && [ "$R14_UPDATE_TEST4" = "" ] && [ "$R14_UPDATE_TEST5" = "" ] && [ "$R14_UPDATE_TEST6" = "" ] \
    && [ "$R14_UPDATE_TEST7" = "" ] && [ "$R14_UPDATE_TEST8" = "" ] && [ "$R14_UPDATE_TEST9" = "" ]; then
    $TDEDIR/bin/kwriteconfig --file kdeglobals --group "R14 XDG Updates" --key Updated --type bool "true"
  else
    # Don't use the --type parameter here because the value no longer is boolean.
    $TDEDIR/bin/kwriteconfig --file kdeglobals --group "R14 XDG Updates" --key Updated "$KDEGLOBALS_KEY_VALUE"
  fi
else
  echo "This script has been run at least once previously. To run manually pass the 'force' parameter."
fi

unset PROFILE_DIR
unset R14_UPDATED
unset TDEHOME_LINK
unset R14_UPDATE_TEST1
unset R14_UPDATE_TEST2
unset R14_UPDATE_TEST3
unset R14_UPDATE_TEST4
unset R14_UPDATE_TEST5
unset R14_UPDATE_TEST6
unset KDEGLOBALS_KEY_VALUE
unset TEST_NUM
exit 0