diff options
Diffstat (limited to 'python/pyqt/doc/PyQt.sgml')
| -rw-r--r-- | python/pyqt/doc/PyQt.sgml | 5807 |
1 files changed, 0 insertions, 5807 deletions
diff --git a/python/pyqt/doc/PyQt.sgml b/python/pyqt/doc/PyQt.sgml deleted file mode 100644 index 62916248..00000000 --- a/python/pyqt/doc/PyQt.sgml +++ /dev/null @@ -1,5807 +0,0 @@ -<!DOCTYPE Article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"> -<Article> -<ArtHeader> - <Title>Python Bindings for Qt (3.17.2)</Title> - <Author> - <FirstName>Phil</FirstName> - <Surname>Thompson</Surname> - </Author> - <Abstract> - <Para> - This document describes a set of Python bindings for the Qt widget set. - Contact the author at <Email>phil@riverbankcomputing.co.uk</Email>. - </Para> - </Abstract> -</ArtHeader> - - -<Sect1><Title>Introduction</Title> -<Para> -PyQt is a set of Python bindings for the Qt toolkit and available for all -platforms supported by Qt, including Windows, Linux, UNIX, MacOS/X and embedded -systems such as the Sharp Zaurus and the Compaq iPAQ. They have been tested -against Qt versions 1.43 to 3.3.6, Qt Non-commercial, Qtopia 1.5.0, and Python -versions 1.5 to 2.4.2. Qt/Embedded v3 is not supported. Qt v4 is supported -by PyQt v4. -</Para> - -<Para> -PyQt is available under the GPL license for use with the GPL version of Qt, a -a commercial license for use with the commercial version of Qt, a -non-commercial license for use with the non-commercial version of Qt v2, and an -educational license for use with the educational version of Qt. -</Para> - -<Para> -There is also an evaluation version of PyQt for Windows. This must be used -with the corresponding evaluation version of Qt. -</Para> - -<Para> -PyQt is built using SIP (a tool for generating Python extension modules for -C++ class libraries). SIP v4.6 or later must be installed in order to build -and run this version of PyQt. -</Para> - -<Para> -PyQt for MacOS/X requires Qt v3.1.0 or later and Python v2.3 or later. -</Para> - -<Para> -The bindings are implemented as a number of Python modules -</Para> - -<ItemizedList> -<ListItem> -<Para> -<Literal>qt</Literal> is the main module and contains the core classes and most -user interface widgets. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtaxcontainer</Literal> contains a sub-set of the classes implemented -in Qt's QAxContainer module, part of Qt's ActiveQt framework. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtcanvas</Literal> contains the classes implemented in Qt's Canvas -module. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtgl</Literal> contains the classes implemented in Qt's OpenGL module. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtnetwork</Literal> contains the classes implemented in Qt's Network -module. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtpe</Literal> contains the classes implemented in Qtopia (originally -called the Qt Palmtop Environment). It is only supported with Qt/Embedded. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtsql</Literal> contains the classes implemented in Qt's SQL module. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qttable</Literal> contains the classes implemented in Qt's Table -module. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtui</Literal> contains the classes implemented in Qt's qui library. -These allow GUIs to be created directly from Qt Designer's -<Literal>.ui</Literal> files. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtxml</Literal> contains the classes implemented in Qt's XML module. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>qtext</Literal> contains useful third-party classes that are not part -of Qt. At the moment it contains bindings for QScintilla, the port to Qt of -the Scintilla programmer's editor class. -</Para> -</ListItem> -</ItemizedList> - -<Para> -PyQt also includes the <Literal>pyuic</Literal> and -<Literal>pylupdate</Literal> utilities which correspond to the Qt -<Literal>uic</Literal> and <Literal>lupdate</Literal> utilities. -<Literal>pyuic</Literal> converts the GUI designs created with Qt Designer to -executable Python code. <Literal>pylupdate</Literal> scans Python code, -extracts all strings that are candidates for internationalisation, and creates -an XML file for use by Qt Linguist. -</Para> - -<Sect2><Title>Changes</Title> -<Para> -The changes visible to the Python programmer in this release are as follows. -</Para> -<ItemizedList> - -<ListItem> -<Para> -This version requires SIP v4.4 (or later). -</Para> -</ListItem> - -<ListItem> -<Para> -Concatenating Python strings and <Literal>QString</Literal>s is now supported. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>QString</Literal> now supports the <Literal>*</Literal> and -<Literal>*=</Literal> operators that behave as they do for Python strings. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>QString</Literal> is more interoperable with Python string and unicode -objects. For example they can be passed as arguments to -<Literal>open()</Literal> and to most (but not all) string methods. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>QPopupMenu</Literal> (and sub-classes) instances now transfer -ownership of the menu to Python in the call to <Literal>exec_loop()</Literal>. -This means the menu's resources are all released when the Python wrapper is -garbage collected without needing to call -<Literal>QObject.deleteLater()</Literal>. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>QObject.sender()</Literal> now handles Python signals. -</Para> -</ListItem> - -<ListItem> -<Para> -The missing <Literal>MacintoshVersion</Literal> enum has been added. -</Para> -</ListItem> - -<ListItem> -<Para> -<Literal>PYQT_BUILD</Literal> has been removed. -</Para> -</ListItem> - -<ListItem> -<Para> -The convention for converting between a C/C++ null pointer and Python's -<Literal>None</Literal> object has now been universally applied. In previous -versions a null pointer to, for example, a Qt list container would often be -converted to an empty list rather than <Literal>None</Literal>. -</Para> -</ListItem> - -</ItemizedList> -</Sect2> -</Sect1> - - -<Sect1><Title>Other PyQt Goodies</Title> -<Sect2><Title>Using Qt Designer</Title> -<Para> -Qt Designer is a GPL'ed GUI design editor provided by Trolltech as part of Qt. -It generates an XML description of a GUI design. Qt includes -<Literal>uic</Literal> which generates C++ code from that XML. -</Para> - -<Para> -PyQt includes <Literal>pyuic</Literal> which generates Python code from the -same XML. The Python code is self contained and can be executed immediately. -</Para> - -<Para> -It is sometimes useful to be able to include some specific Python code in the -output generated by <Literal>pyuic</Literal>. For example, if you are using -custom widgets, <Literal>pyuic</Literal> has no way of knowing the name of the -Python module containing the widget and so cannot generate the required -<Literal>import</Literal> statement. To help get around this, -<Literal>pyuic</Literal> will extract any lines entered in the -<Literal>Comment</Literal> field of Qt Designer's -<Literal>Form Settings</Literal> dialog that begin with -<Literal>Python:</Literal> and copies them to the generated output. -</Para> - -<Para> -Here's a simple example showing the contents of the <Literal>Comment</Literal> -field. -</Para> - -<ProgramListing> -This comment will be ignored by pyuic. -Python: -Python:# Import our custom widget. -Python:from foo import bar -</ProgramListing> - -<Para> -Here's the corresponding output from <Literal>pyuic</Literal>. -</Para> - -<ProgramListing> -from qt import * - -# Import our custom widget. -from foo import bar -</ProgramListing> - -<Para> -Thanks to Christian Bird, <Literal>pyuic</Literal> will extract Python code -entered using Qt Designer to implement slots. In Qt Designer, when you need to -edit a slot and the source editor appears, enter Python code between the curly -braces. Don't worry about the correct starting indent level, each line is -prepended with a correct indentation. -</Para> - -<Para> -Make sure that the <Literal>ui.h</Literal> file is in the same directory as the -<Literal>.ui</Literal> file when using <Literal>pyuic</Literal>. The -<Literal>.ui</Literal> file implies the name of the <Literal>.ui.h</Literal> -file so there is no need to specify it on the command line. -</Para> - -<Para> -Here's an example of a simple slot. -</Para> - -<ProgramListing> -void DebMainWindowFrm::browsePushButtonClicked() -{ -if self.debugging: - QMessageBox.critical(self, "Event", "browse pushbutton was clicked!") -} -</ProgramListing> - -<Para> -Here is the resulting code when <Literal>pyuic</Literal> is run. -</Para> - -<ProgramListing> -class DebMainWindowFrm(QMainWindow): - ...stuff... - def browsePushButtonClicked(self): - if self.debugging: - QMessageBox.critical(self, "Event", "browse pushbutton was clicked!") -</ProgramListing> - -<Para> -Note that indenting is as normal and that <Literal>self</Literal> and all other -parameters passed to the slot are available. -</Para> - -<Para> -If you use this, you will need to turn off all of the fancy options for the C++ -editor in Designer as it tries to force C++ syntax and that's naturally -annoying when trying to code in Python. -</Para> -</Sect2> - -<Sect2><Title>Using Qt Linguist</Title> -<Para> -Qt includes the <Literal>lupdate</Literal> program which parses C++ source -files converting calls to the <Literal>QT_TR_NOOP()</Literal> and -<Literal>QT_TRANSLATE_NOOP()</Literal> macros to <Literal>.ts</Literal> -language source files. The <Literal>lrelease</Literal> program is then used to -generate <Literal>.qm</Literal> binary language files that are distributed with -your application. -</Para> - -<Para> -Thanks to Detlev Offenbach, PyQt includes the <Literal>pylupdate</Literal> -program. This generates the same <Literal>.ts</Literal> language source files -from your PyQt source files. -</Para> -</Sect2> -</Sect1> - - -<Sect1><Title>Deploying Commercial PyQt Applications</Title> -<Para> -When deploying commercial PyQt applications it is necessary to discourage users -from accessing the underlying PyQt modules for themselves. A user that used -the modules shipped with your application to develop new applications would -themselves be considered a developer and would need their own commercial Qt and -PyQt licenses. -</Para> - -<Para> -One solution to this problem is the -<ULink url="http://www.riverbankcomputing.co.uk/vendorid/">VendorID</ULink> -package. This allows you to build Python extension modules that can only be -imported by a digitally signed custom interpreter. The package enables you to -create such an interpreter with your application embedded within it. The -result is an interpreter that can only run your application, and PyQt modules -that can only be imported by that interpreter. You can use the package to -similarly restrict access to any extension module. -</Para> - -<Para> -In order to build PyQt with support for the VendorID package, pass the -<Literal>-i</Literal> command line flag to <Literal>configure.py</Literal>. -</Para> -</Sect1> - -<Sect1><Title><Literal>pyqtconfig</Literal> and Build System Support</Title> -<Para> -The SIP build system (ie. the <Literal>sipconfig</Literal> module) is described -in the SIP documentation. PyQt includes the <Literal>pyqtconfig</Literal> -module that can be used by configuration scripts of other bindings that are -built on top of PyQt. -</Para> - -<Para> -The <Literal>pyqtconfig</Literal> module contains the following classes: -</Para> - -<VariableList> -<VarListEntry> -<Term><Literal>Configuration(sipconfig.Configuration)</Literal></Term> -<ListItem> -<Para> -This class encapsulates additional configuration values, specific to PyQt, that -can be accessed as instance variables. -</Para> - -<Para> -The following configuration values are provided (in addition to those provided -by the <Literal>sipconfig.Configuration</Literal> class): -</Para> -<VariableList> - -<VarListEntry> -<Term><Literal>pyqt_bin_dir</Literal></Term> -<ListItem> -<Para> -The name of the directory containing the <Literal>pyuic</Literal> and -<Literal>pylupdate</Literal> executables. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_config_args</Literal></Term> -<ListItem> -<Para> -The command line passed to <Literal>configure.py</Literal> when PyQt was -configured. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_mod_dir</Literal></Term> -<ListItem> -<Para> -The name of the directory containing the PyQt modules. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_modules</Literal></Term> -<ListItem> -<Para> -A string containing the names of the PyQt modules that were installed. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qt_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qt</Literal> module and which should be added to those needed by any -module that imports the <Literal>qt</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qtaxcontainer_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qtaxcontainer</Literal> module and which should be added to those -needed by any module that imports the <Literal>qtaxcontainer</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qtcanvas_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qtcanvas</Literal> module and which should be added to those needed by -any module that imports the <Literal>qtcanvas</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qtext_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qtext</Literal> module and which should be added to those needed by -any module that imports the <Literal>qtext</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qtgl_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qtgl</Literal> module and which should be added to those needed by any -module that imports the <Literal>qtgl</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qtnetwork_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qtnetwork</Literal> module and which should be added to those needed -by any module that imports the <Literal>qtnetwork</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qtsql_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qtsql</Literal> module and which should be added to those needed by -any module that imports the <Literal>qtsql</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qttable_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qttable</Literal> module and which should be added to those needed by -any module that imports the <Literal>qttable</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qtui_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qtui</Literal> module and which should be added to those needed by any -module that imports the <Literal>qtui</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_qtxml_sip_flags</Literal></Term> -<ListItem> -<Para> -A string of the SIP flags used to generate the code for the -<Literal>qtxml</Literal> module and which should be added to those needed by -any module that imports the <Literal>qtxml</Literal> module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_sip_dir</Literal></Term> -<ListItem> -<Para> -The name of the base directory where the <Literal>.sip</Literal> files for each -of the PyQt modules is installed. A sub-directory exists with the same name as -the module. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_version</Literal></Term> -<ListItem> -<Para> -The PyQt version as a 3 part hexadecimal number (eg. v3.10 is represented as -<Literal>0x030a00</Literal>). -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>pyqt_version_str</Literal></Term> -<ListItem> -<Para> -The PyQt version as a string. For development snapshots it will start with -<Literal>snapshot-</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> - -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtModuleMakefile(sipconfig.SIPModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qt</Literal> module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtAxContainerModuleMakefile(QtModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qtaxcontainer</Literal> -module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtCanvasModuleMakefile(QtModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qtcanvas</Literal> -module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtExtModuleMakefile(QtModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qtext</Literal> module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtGLModuleMakefile(QtModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qtgl</Literal> module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtNetworkModuleMakefile(QtModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qtnetwork</Literal> -module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtTableModuleMakefile(QtModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qttable</Literal> -module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtSQLModuleMakefile(QtTableModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qtsql</Literal> module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtUIModuleMakefile(QtModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qtui</Literal> module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -<VarListEntry> -<Term><Literal>QtXMLModuleMakefile(QtModuleMakefile)</Literal></Term> -<ListItem> -<Para> -The Makefile class for modules that import the <Literal>qtxml</Literal> module. -</Para> -<VariableList> -<VarListEntry> -<Term><Literal>finalise(self)</Literal></Term> -<ListItem> -<Para> -This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>. -</Para> -<Para></Para><Para></Para> -</ListItem> -</VarListEntry> -</VariableList> -</ListItem> -</VarListEntry> - -</VariableList> -</Sect1> -<Sect1><Title>Things to be Aware Of</Title> -<Sect2><Title>super and Wrapped Classes</Title> -<Para> -Internally PyQt implements a lazy technique for attribute lookup where -attributes are only placed in type and instance dictionaries when they are -first referenced. This technique is needed to reduce the time taken to import -large modules such as PyQt. -</Para> - -<Para> -In most circumstances this technique is transparent to an application. The -exception is when <Literal>super</Literal> is used with a PyQt class. The way -that <Literal>super</Literal> is currently implemented means that the lazy -lookup is bypassed resulting in <Literal>AttributeError</Literal> exceptions -unless the attribute has been previously referenced. -</Para> - -<Para> -Note that this restriction applies to any class wrapped by SIP and not just -PyQt. -</Para> -</Sect2> - - -<Sect2><Title>Python Strings, Qt Strings and Unicode</Title> -<Para> -Unicode support was added to Qt in v2.0 and to Python in v1.6. In Qt, Unicode -support is implemented using the <Literal>QString</Literal> class. It is -important to understand that <Literal>QString</Literal>s, Python string objects -and Python Unicode objects are all different but conversions between them are -automatic in almost all cases and easy to achieve manually when needed. -</Para> - -<Para> -Whenever PyQt expects a <Literal>QString</Literal> as a function argument, a -Python string object or a Python Unicode object can be provided instead, and -PyQt will do the necessary conversion automatically. -</Para> - -<Para> -You may also manually convert Python string and Unicode objects to -<Literal>QString</Literal>s by using the <Literal>QString</Literal> constructor -as demonstrated in the following code fragment. -</Para> - -<ProgramListing> -qs1 = QString('Converted Python string object') -qs2 = QString(u'Converted Python Unicode object') -</ProgramListing> - -<Para> -In order to convert a <Literal>QString</Literal> to a Python string object use -the Python <Literal>str()</Literal> function. Applying -<Literal>str()</Literal> to a null <Literal>QString</Literal> and an empty -<Literal>QString</Literal> both result in an empty Python string object. -</Para> - -<Para> -In order to convert a <Literal>QString</Literal> to a Python Unicode object use -the Python <Literal>unicode()</Literal> function. Applying -<Literal>unicode()</Literal> to a null <Literal>QString</Literal> and an empty -<Literal>QString</Literal> both result in an empty Python Unicode object. -</Para> -</Sect2> - -<Sect2><Title>Access to Protected Member Functions</Title> -<Para> -When an instance of a C++ class is not created from Python it is not possible -to access the protected member functions, or emit the signals, of that -instance. Attempts to do so will raise a Python exception. Also, any Python -methods corresponding to the instance's virtual member functions will never be -called. -</Para> -</Sect2> - -<Sect2><Title><Literal>None</Literal> and <Literal>NULL</Literal></Title> -<Para> -Throughout the bindings, the <Literal>None</Literal> value can be specified -wherever <Literal>NULL</Literal> is acceptable to the underlying C++ code. -</Para> - -<Para> -Equally, <Literal>NULL</Literal> is converted to <Literal>None</Literal> -whenever it is returned by the underlying C++ code. -</Para> -</Sect2> - - -<Sect2><Title>Support for C++ <Literal>void *</Literal> Data Types</Title> -<Para> -PyQt represents <Literal>void *</Literal> values as objects of type -<Literal>sip.voidptr</Literal>. Such values are often used to pass the -addresses of external objects between different Python modules. To make this -easier, a Python integer (or anything that Python can convert to an integer) -can be used whenever a <Literal>sip.voidptr</Literal> is expected. -</Para> -<Para> -A <Literal>sip.voidptr</Literal> may be converted to a Python integer by using -the <Literal>int()</Literal> builtin function. -</Para> -<Para> -A <Literal>sip.voidptr</Literal> may be converted to a Python string by using -its <Literal>asstring()</Literal> method. The <Literal>asstring()</Literal> -method takes an integer argument which is the length of the data in bytes. -</Para> -</Sect2> - - -<Sect2><Title>Support for Threads</Title> -<Para> -PyQt implements the full set of Qt's thread classes. Python, of course, also -has its own thread extension modules. If you are using SIP v4 (or later) and -Python v2.3.5 (or later) then PyQt does not impose any additional restrictions. -(Read the relevant part of the Qt documentation to understand the restrictions -imposed by the Qt API.) -</Para> -<Para> -If you are using earlier versions of either SIP or Python then it is possible -to use either of the APIs so long as you follow some simple rules. -</Para> -<ItemizedList> -<ListItem> -<Para> -If you use the Qt API then the very first <Literal>import</Literal> of one of -the PyQt modules must be done from the main thread. -</Para> -</ListItem> -<ListItem> -<Para> -If you use the Python API then all calls to PyQt (including any -<Literal>import</Literal>s) must be done from one thread only. Therefore, if -you want to make calls to PyQt from several threads then you must use the Qt -API. -</Para> -</ListItem> -<ListItem> -<Para> -If you want to use both APIs in the same application then all calls to PyQt -must be done from threads created using the Qt API. -</Para> -</ListItem> -</ItemizedList> -<Para> -The above comments actually apply to any SIP generated module, not just PyQt. -</Para> -</Sect2> - -<Sect2><Title>Garbage Collection</Title> -<Para> -C++ does not garbage collect unreferenced class instances, whereas Python does. -In the following C++ fragment both colours exist even though the first can no -longer be referenced from within the program: -</Para> - -<ProgramListing> -c = new QColor(); -c = new QColor(); -</ProgramListing> - -<Para> -In the corresponding Python fragment, the first colour is destroyed when -the second is assigned to <Literal>c</Literal>: -</Para> - -<ProgramListing> -c = QColor() -c = QColor() -</ProgramListing> - -<Para> -In Python, each colour must be assigned to different names. Typically this -is done within class definitions, so the code fragment would be something like: -</Para> - -<ProgramListing> -self.c1 = QColor() -self.c2 = QColor() -</ProgramListing> - -<Para> -Sometimes a Qt class instance will maintain a pointer to another instance and -will eventually call the destructor of that second instance. The most common -example is that a <Literal>QObject</Literal> (and any of its sub-classes) keeps -pointers to its children and will automatically call their destructors. In -these cases, the corresponding Python object will also keep a reference to the -corresponding child objects. -</Para> - -<Para> -So, in the following Python fragment, the first <Literal>QLabel</Literal> is -not destroyed when the second is assigned to <Literal>l</Literal> because the -parent <Literal>QWidget</Literal> still has a reference to it. -</Para> - -<ProgramListing> -p = QWidget() -l = QLabel('First label',p) -l = QLabel('Second label',p) -</ProgramListing> -</Sect2> - -<Sect2><Title>C++ Variables</Title> -<Para> -Access to C++ variables is supported. They are accessed as Python instance -variables. For example: -</Para> - -<ProgramListing> -tab = QTab() -tab.label = "First Tab" -tab.r = QRect(10,10,75,30) -</ProgramListing> - -<Para> -Global variables and static class variables are effectively read-only. They -can be assigned to, but the underlying C++ variable will not be changed. This -may change in the future. -</Para> - -<Para> -Access to protected C++ class variables is not supported. This may change in -the future. -</Para> -</Sect2> - -<Sect2><Title>Multiple Inheritance</Title> -<Para> -It is not possible to define a new Python class that sub-classes from more than -one Qt class. -</Para> -</Sect2> - -<Sect2><Title>i18n Support</Title> -<Para> -Qt implements i18n support through the Qt Linguist application, the -<Literal>QTranslator</Literal> class, and the -<Literal>QApplication::translate()</Literal>, <Literal>QObject::tr()</Literal> -and <Literal>QObject::trUtf8()</Literal> methods. Usually the -<Literal>tr()</Literal> method is used to obtain the correct translation of a -message. The translation process uses a message context to allow the same -message to be translated differently. <Literal>tr()</Literal> is actually -generated by <Literal>moc</Literal> and uses the hardcoded class name as the -context. On the other hand, <Literal>QApplication::translate()</Literal> -allows to context to be explicitly stated. -</Para> - -<Para> -Unfortunately, because of the way Qt implents <Literal>tr()</Literal> (and -<Literal>trUtf8()</Literal>) it is not possible for PyQt to exactly reproduce -its behavour. The PyQt implementation of <Literal>tr()</Literal> (and -<Literal>trUtf8()</Literal>) uses the class name of the instance as the -context. The key difference, and the source of potential problems, is that the -context is determined dynamically in PyQt, but is hardcoded in Qt. In other -words, the context of a translation may change depending on an instance's class -hierarchy. -</Para> - -<ProgramListing> -class A(QObject): - def __init__(self): - QObject.__init__(self) - - def hello(self): - return self.tr("Hello") - -class B(A): - def __init__(self): - A.__init__(self) - -a = A() -a.hello() - -b = B() -b.hello() -</ProgramListing> - -<Para> -In the above the message is translated by <Literal>a.hello()</Literal> using a -context of <Literal>A</Literal>, and by <Literal>b.hello()</Literal> using a -context of <Literal>B</Literal>. In the equivalent C++ version the context -would be <Literal>A</Literal> in both cases. -</Para> - -<Para> -The PyQt behaviour is unsatisfactory and may be changed in the future. It is -recommended that <Literal>QApplication.translate()</Literal> be used in -preference to <Literal>tr()</Literal> (and <Literal>trUtf8()</Literal>). This -is guaranteed to work with current and future versions of PyQt and makes it -much easier to share message files between Python and C++ code. Below is the -alternative implementation of <Literal>A</Literal> that uses -<Literal>QApplication.translate()</Literal>. -</Para> - -<ProgramListing> -class A(QObject): - def __init__(self): - QObject.__init__(self) - - def hello(self): - return qApp.translate("A","Hello") -</ProgramListing> - -<Para> -Note that the code generated by <Literal>pyuic</Literal> uses -<Literal>QApplication.translate()</Literal>. -</Para> -</Sect2> -</Sect1> - - -<Sect1><Title>Signal and Slot Support</Title> -<Para> -A signal may be either a Qt signal (specified using -<Literal>SIGNAL()</Literal>) or a Python signal (specified using -<Literal>PYSIGNAL()</Literal>). -</Para> - -<Para> -A slot can be either a Python callable object, a Qt signal (specified using -<Literal>SIGNAL()</Literal>), a Python signal (specified using -<Literal>PYSIGNAL()</Literal>), or a Qt slot (specified using -<Literal>SLOT()</Literal>). -</Para> - -<Para> -You connect signals to slots (and other signals) as you would from C++. For -example: -</Para> - -<ProgramListing> -QObject.connect(a,SIGNAL("QtSig()"),pyFunction) -QObject.connect(a,SIGNAL("QtSig()"),pyClass.pyMethod) -QObject.connect(a,SIGNAL("QtSig()"),PYSIGNAL("PySig")) -QObject.connect(a,SIGNAL("QtSig()"),SLOT("QtSlot()")) -QObject.connect(a,PYSIGNAL("PySig"),pyFunction) -QObject.connect(a,PYSIGNAL("PySig"),pyClass.pyMethod) -QObject.connect(a,PYSIGNAL("PySig"),SIGNAL("QtSig()")) -QObject.connect(a,PYSIGNAL("PySig"),SLOT("QtSlot()")) -</ProgramListing> - -<Para> -When a slot is a Python method that corresponds to a Qt slot then a signal can -be connected to either the Python method or the Qt slot. The following -connections achieve the same effect. -</Para> - -<ProgramListing> -sbar = QScrollBar() -lcd = QLCDNumber() - -QObject.connect(sbar,SIGNAL("valueChanged(int)"),lcd.display) -QObject.connect(sbar,SIGNAL("valueChanged(int)"),lcd,SLOT("display(int)")) -</ProgramListing> - -<Para> -The difference is that the second connection is made at the C++ level and is -more efficient. -</Para> - -<Para> -Disconnecting signals works in exactly the same way. -</Para> - -<Para> -Any instance of a class that is derived from the <Literal>QObject</Literal> -class can emit a signal using the <Literal>emit</Literal> method. This takes -two arguments. The first is the Python or Qt signal, the second is a Python -tuple which are the arguments to the signal. For example: -</Para> - -<ProgramListing> -a.emit(SIGNAL("clicked()"),()) -a.emit(PYSIGNAL("pySig"),("Hello","World")) -</ProgramListing> - -<Para> -Note that when a slot is a Python callable object its reference count is not -increased. This means that a class instance can be deleted without having to -explicitly disconnect any signals connected to its methods. However, it also -means that using lambda expressions as slots will not work unless you keep a -separate reference to the expression to prevent it from being immediately -garbage collected. -</Para> - -<Para> -Qt allows a signal to be connected to a slot that requires fewer arguments than -the signal passes. The extra arguments are quietly discarded. Python slots -can be used in the same way. -</Para> -</Sect1> - - -<Sect1><Title>Static Member Functions</Title> -<Para> -Static member functions are implemented as Python class functions. -For example the C++ static member function -<Literal>QObject::connect()</Literal> is called from Python as -<Literal>QObject.connect()</Literal> or <Literal>self.connect()</Literal> if -called from a sub-class of <Literal>QObject</Literal>. -</Para> -</Sect1> - - -<Sect1><Title>Enumerated Types</Title> -<Para> -Enumerated types are implemented as a set of simple variables corresponding to -the separate enumerated values. -</Para> - -<Para> -When using an enumerated value the name of the class (or a sub-class) in which -the enumerated type was defined in must be included. For example: -</Para> - -<ProgramListing> -Qt.SolidPattern -QWidget.TabFocus -QFrame.TabFocus -</ProgramListing> -</Sect1> - - -<Sect1><Title>Module Reference Documentation</Title> -<Para> -The following sections should be used in conjunction with the normal class -documentation - only the differences specific to the Python bindings are -documented here. -</Para> - -<Para> -In these sections, <Emphasis>Not yet implemented</Emphasis> -implies that the feature can be easily implemented if needed. <Emphasis>Not -implemented</Emphasis> implies that the feature will not be implemented, either -because it cannot be or because it is not appropriate. -</Para> - -<Para> -If a class is described as being <Emphasis>fully implemented</Emphasis> then -all non-private member functions and all public class variables have been -implemented. -</Para> - -<Para> -If an operator has been implemented then it is stated explicitly. -</Para> - -<Para> -Classes that are not mentioned have not yet been implemented. -</Para> -</Sect1> - - -<Sect1><Title><Literal>qt</Literal> Module Reference</Title> -<Sect2><Title>Qt Constants</Title> -<Para> -All constant values defined by Qt have equivalent constants defined to Python. -</Para> -</Sect2> -<Sect2><Title>Qt (Qt v2+)</Title> -<Para> -<Literal>Qt</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QAccel</Title> -<Para> -<Literal>QAccel</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QAction (Qt v2.2+)</Title> -<Para> -<Literal>QAction</Literal> is fully implemented. -</Para> - -</Sect2> -<Sect2><Title>QActionGroup (Qt v2.2+)</Title> -<Para> -<Literal>QActionGroup</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QApplication</Title> -<FuncSynopsis> - <FuncDef><Function>QApplication</Function></FuncDef> - <ParamDef>int &<Parameter>argc</Parameter></ParamDef> - <ParamDef>char **<Parameter>argv</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes one parameter which is a list of argument strings. Arguments -used by Qt are removed from the list. -</Para> - -<FuncSynopsis> - <FuncDef><Function>QApplication</Function></FuncDef> - <ParamDef>int &<Parameter>argc</Parameter></ParamDef> - <ParamDef>char **<Parameter>argv</Parameter></ParamDef> - <ParamDef>bool <Parameter>GUIenabled</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes two parameters, the first of which is a list of argument strings. -Arguments used by Qt are removed from the list. -</Para> - -<FuncSynopsis> - <FuncDef><Function>QApplication</Function></FuncDef> - <ParamDef>int &<Parameter>argc</Parameter></ParamDef> - <ParamDef>char **<Parameter>argv</Parameter></ParamDef> - <ParamDef>Type <Parameter>type</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes two parameters, the first of which is a list of argument strings. -Arguments used by Qt are removed from the list. (Qt v2.2+) -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>exec</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed to <Literal>exec_loop</Literal> in Python. -</Para> -</Sect2> -<Sect2><Title>QAssistantClient (Qt v3.1+)</Title> -<Para> -<Literal>QAssistantClient</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QBitmap</Title> -<Para> -<Literal>QBitmap</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QBrush</Title> -<Para> -<Literal>QBrush</Literal> is fully implemented, including the Python -<Literal>==</Literal> and <Literal>!=</Literal> operators. -</Para> -</Sect2> -<Sect2><Title>QButton</Title> -<Para> -<Literal>QButton</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QButtonGroup</Title> -<Para> -<Literal>QButtonGroup</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QByteArray</Title> -<Para> -A Python string can be used whenever a <Literal>QByteArray</Literal> can be -used. A <Literal>QByteArray</Literal> can be converted to a Python string -using the Python <Literal>str()</Literal> function. -</Para> - -<FuncSynopsis> - <FuncDef>QByteArray &<Function>assign</Function></FuncDef> - <ParamDef>const char *<Parameter>data</Parameter></ParamDef> - <ParamDef>uint <Parameter>size</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>char &<Function>at</Function></FuncDef> - <ParamDef>uint <Parameter>i</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>contains</Function></FuncDef> - <ParamDef>const char &<Parameter>d</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>fill</Function></FuncDef> - <ParamDef>const char &<Parameter>d</Parameter></ParamDef> - <ParamDef>int <Parameter>size</Parameter> = -1</ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>find</Function></FuncDef> - <ParamDef>const char &<Parameter>d</Parameter></ParamDef> - <ParamDef>uint <Parameter>i</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>resetRawData</Function></FuncDef> - <ParamDef>const char *<Parameter>data</Parameter></ParamDef> - <ParamDef>uint<Parameter>size</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QByteArray &<Function>setRawData</Function></FuncDef> - <ParamDef>const char *<Parameter>data</Parameter></ParamDef> - <ParamDef>uint<Parameter>size</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QCDEStyle (Qt v2+)</Title> -<Para> -<Literal>QCDEStyle</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QCheckBox</Title> -<Para> -<Literal>QCheckBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QClipboard</Title> -<FuncSynopsis> - <FuncDef>void *<Function>data</Function> const</FuncDef> - <ParamDef>const char *<Parameter>format</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented (Qt v1.x). -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>setData</Function></FuncDef> - <ParamDef>const char *<Parameter>format</Parameter></ParamDef> - <ParamDef>void *<Parameter></Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented (Qt v1.x). -</Para> -</Sect2> -<Sect2><Title>QColor</Title> -<Para> -The Python <Literal>==</Literal> and <Literal>!=</Literal> operators are -supported. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>getHsv</Function></FuncDef> - <ParamDef>int *<Parameter>h</Parameter></ParamDef> - <ParamDef>int *<Parameter>s</Parameter></ParamDef> - <ParamDef>int *<Parameter>v</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns the <Literal>h</Literal>, -<Literal>s</Literal> and <Literal>v</Literal> values as a tuple. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>getRgb</Function></FuncDef> - <ParamDef>int *<Parameter>r</Parameter></ParamDef> - <ParamDef>int *<Parameter>g</Parameter></ParamDef> - <ParamDef>int *<Parameter>b</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns the <Literal>r</Literal>, -<Literal>g</Literal> and <Literal>b</Literal> values as a tuple. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>hsv</Function></FuncDef> - <ParamDef>int *<Parameter>h</Parameter></ParamDef> - <ParamDef>int *<Parameter>s</Parameter></ParamDef> - <ParamDef>int *<Parameter>v</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns the <Literal>h</Literal>, -<Literal>s</Literal> and <Literal>v</Literal> values as a tuple. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>rgb</Function></FuncDef> - <ParamDef>int *<Parameter>r</Parameter></ParamDef> - <ParamDef>int *<Parameter>g</Parameter></ParamDef> - <ParamDef>int *<Parameter>b</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns the <Literal>r</Literal>, -<Literal>g</Literal> and <Literal>b</Literal> values as a tuple. -</Para> -</Sect2> -<Sect2><Title>QColorDialog (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>static QRgb <Function>getRgba</Function></FuncDef> - <ParamDef>QRgb <Parameter>initial</Parameter></ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter></ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>initial</Literal>, <Literal>parent</Literal> and -<Literal>name</Literal> parameters and returns a tuple containing the -<Literal>QRgb</Literal> result and the <Literal>ok</Literal> value. -</Para> -</Sect2> -<Sect2><Title>QColorGroup</Title> -<Para> -<Literal>QColorGroup</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QComboBox</Title> -<Para> -<Literal>QComboBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QCommonStyle (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>virtual void <Function>getButtonShift</Function></FuncDef> - <ParamDef>int &<Parameter>x</Parameter></ParamDef> - <ParamDef>int &<Parameter>y</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the <Literal>x</Literal> and -<Literal>y</Literal> values. (Qt v2) -</Para> - -<FuncSynopsis> - <FuncDef>virtual void <Function>tabbarMetrics</Function></FuncDef> - <ParamDef>const QTabBar *<Parameter>t</Parameter></ParamDef> - <ParamDef>int &<Parameter>hframe</Parameter></ParamDef> - <ParamDef>int &<Parameter>vframe</Parameter></ParamDef> - <ParamDef>int &<Parameter>overlap</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>t</Literal> parameter and returns a tuple of the -<Literal>hframe</Literal>, <Literal>vframe</Literal> and -<Literal>overlap</Literal> values. (Qt v2) -</Para> -</Sect2> -<Sect2><Title>QCString (Qt v2+)</Title> -<Para> -A Python string can be used whenever a <Literal>QCString</Literal> can be used. -A <Literal>QCString</Literal> can be converted to a Python string using the -Python <Literal>str()</Literal> function. -</Para> - -<FuncSynopsis> - <FuncDef>QCString &<Function>sprintf</Function></FuncDef> - <ParamDef>const char *<Parameter>format</Parameter></ParamDef> - <ParamDef>...</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>short <Function>toShort</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>short</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>ushort <Function>toUShort</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>ushort</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>toInt</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>int</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>uint <Function>toUInt</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>uint</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>long <Function>toLong</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>long</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>ulong <Function>toULong</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>ulong</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>float <Function>toFloat</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>float</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>double <Function>toDouble</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>double</Literal> result and the -<Literal>ok</Literal> value. -</Para> -</Sect2> -<Sect2><Title>QCursor</Title> -<Para> -<Literal>QCursor</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QDataStream</Title> -<FuncSynopsis> - <FuncDef>QDataStream &<Function>readBytes</Function></FuncDef> - <ParamDef>const char *&<Parameter>s</Parameter></ParamDef> - <ParamDef>uint &<Parameter>l</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters. The <Literal>QDataStream</Literal> result and the -data read are returned as a tuple. -</Para> - -<FuncSynopsis> - <FuncDef>QDataStream &<Function>readRawBytes</Function></FuncDef> - <ParamDef>const char *<Parameter>s</Parameter></ParamDef> - <ParamDef>uint <Parameter>l</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>l</Literal> parameter. The -<Literal>QDataStream</Literal> result and the data read are returned as a -tuple. -</Para> - -<FuncSynopsis> - <FuncDef>QDataStream &<Function>writeBytes</Function></FuncDef> - <ParamDef>const char *<Parameter>s</Parameter></ParamDef> - <ParamDef>uint <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -<Literal>len</Literal> is derived from <Literal>s</Literal> and not passed as a -parameter. -</Para> - -<FuncSynopsis> - <FuncDef>QDataStream &<Function>writeRawBytes</Function></FuncDef> - <ParamDef>const char *<Parameter>s</Parameter></ParamDef> - <ParamDef>uint <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -<Literal>len</Literal> is derived from <Literal>s</Literal> and not passed as a -parameter. -</Para> -</Sect2> -<Sect2><Title>QDate</Title> -<Para> -The Python -<Literal>==</Literal>, <Literal>!=</Literal>, -<Literal><</Literal>, <Literal><=</Literal>, -<Literal>></Literal>, <Literal>>=</Literal> -and <Literal>__nonzero__</Literal> -operators are supported. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>weekNumber</Function></FuncDef> - <ParamDef>int *<Parameter>yearNum</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns the week number and the year number as a -tuple. (Qt v3.1+) -</Para> -</Sect2> - -<Sect2><Title>QDateTime</Title> -<Para> -<Literal>QDateTime</Literal> is fully implemented, including the Python -<Literal>==</Literal>, <Literal>!=</Literal>, -<Literal><</Literal>, <Literal><=</Literal>, -<Literal>></Literal>, <Literal>>=</Literal> -and <Literal>__nonzero__</Literal> -operators. -</Para> -</Sect2> - -<Sect2><Title>QTime</Title> -<Para> -<Literal>QTime</Literal> is fully implemented, including the Python -<Literal>==</Literal>, <Literal>!=</Literal>, -<Literal><</Literal>, <Literal><=</Literal>, -<Literal>></Literal>, <Literal>>=</Literal> -and <Literal>__nonzero__</Literal> -operators. -</Para> -</Sect2> -<Sect2><Title>QDateEdit (Qt v3+)</Title> -<Para> -<Literal>QDateEdit</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTimeEdit (Qt v3+)</Title> -<Para> -<Literal>QTimeEdit</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDateTimeEdit (Qt v3+)</Title> -<Para> -<Literal>QDateTimeEdit</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QDesktopWidget (Qt v3+)</Title> -<Para> -<Literal>QDesktopWidget</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QDial (Qt v2.2+)</Title> -<Para> -<Literal>QDial</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QDialog</Title> -<FuncSynopsis> - <FuncDef>int <Function>exec</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed to <Literal>exec_loop</Literal> in Python. -</Para> -<Para> -This method also causes ownership of the underlying C++ dialog to be transfered -to Python. This means that the C++ dialog will be deleted when the Python -wrapper is garbage collected. Although this is a little inconsistent, it -ensures that the dialog is deleted without having to explicity code it using -<Literal>QObject.deleteLater()</Literal> or other techniques. -</Para> -</Sect2> -<Sect2><Title>QDir</Title> -<Para> -<Literal>QDir</Literal> is fully implemented, including the Python -<Literal>len</Literal>, <Literal>[]</Literal> (for reading slices and -individual elements), <Literal>==</Literal>, <Literal>!=</Literal> and -<Literal>in</Literal> operators -</Para> -</Sect2> - -<Sect2><Title>QFileInfoList</Title> -<Para> -This class isn't implemented. Whenever a <Literal>QFileInfoList</Literal> is -the return type of a function or the type of an argument, a Python list of -<Literal>QFileInfo</Literal> instances is used instead. -</Para> -</Sect2> -<Sect2><Title>QDockArea (Qt v3+)</Title> -<FuncSynopsis> - <FuncDef>bool <Function>hasDockWindow</Function> const</FuncDef> - <ParamDef>QDockWindow *<Parameter>w</Parameter></ParamDef> - <ParamDef>int *<Parameter>index</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>w</Literal> parameter and returns the index of the -QDockWIndow or -1 if the QDockArea does not contain the QDockWindow. -</Para> -</Sect2> -<Sect2><Title>QDockWindow (Qt v3+)</Title> -<Para> -<Literal>QDockWindow</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QColorDrag (Qt v2.1+)</Title> -<Para> -<Literal>QColorDrag</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDragObject</Title> -<Para> -<Literal>QDragObject</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QImageDrag</Title> -<Para> -<Literal>QImageDrag</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QStoredDrag</Title> -<Para> -<Literal>QStoredDrag</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTextDrag</Title> -<Para> -<Literal>QTextDrag</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QUriDrag (Qt v2+)</Title> -<Para> -<Literal>QUriDrag</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QUrlDrag (Qt v1.x)</Title> -<Para> -<Literal>QUrlDrag</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QDropSite</Title> -<Para> -<Literal>QDropSite</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QErrorMessage (Qt v3+)</Title> -<Para> -<Literal>QErrorMessage</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QEvent</Title> -<Para> -<Literal>QEvent</Literal> is fully implemented. -</Para> -<Para> -Instances of <Literal>QEvent</Literal>s are automatically converted to the -correct sub-class. -</Para> -</Sect2> - -<Sect2><Title>QChildEvent</Title> -<Para> -<Literal>QChildEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCloseEvent</Title> -<Para> -<Literal>QCloseEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QIconDragEvent (Qt v3.3+)</Title> -<Para> -<Literal>QIconDragEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QContextMenuEvent (Qt v3+)</Title> -<Para> -<Literal>QContextMenuEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCustomEvent</Title> -<Para> -<Literal>QCustomEvent</Literal> is fully implemented. Any Python object can be -passed as the event data and its reference count is increased. -</Para> -</Sect2> - -<Sect2><Title>QDragEnterEvent</Title> -<Para> -<Literal>QDragEnterEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDragLeaveEvent</Title> -<Para> -<Literal>QDragLeaveEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDragMoveEvent</Title> -<Para> -<Literal>QDragMoveEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDropEvent</Title> -<Para> -<Literal>QDropEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QFocusEvent</Title> -<Para> -<Literal>QFocusEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QHideEvent</Title> -<Para> -<Literal>QHideEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QIMComposeEvent (Qt v3.1+)</Title> -<Para> -<Literal>QIMComposeEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QIMEvent (Qt v3+)</Title> -<Para> -<Literal>QIMEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QKeyEvent</Title> -<Para> -<Literal>QKeyEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QMouseEvent</Title> -<Para> -<Literal>QMouseEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QMoveEvent</Title> -<Para> -<Literal>QMoveEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QPaintEvent</Title> -<Para> -<Literal>QPaintEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QResizeEvent</Title> -<Para> -<Literal>QResizeEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QShowEvent</Title> -<Para> -<Literal>QShowEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTabletEvent (Qt v3+)</Title> -<Para> -<Literal>QTabletEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTimerEvent</Title> -<Para> -<Literal>QTimerEvent</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QWheelEvent (Qt v2+)</Title> -<Para> -<Literal>QWheelEvent</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QEventLoop (Qt v3.1+)</Title> -<FuncSynopsis> - <FuncDef>virtual int <Function>exec</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed to <Literal>exec_loop</Literal> in Python. -</Para> -</Sect2> -<Sect2><Title>QFile</Title> -<FuncSynopsis> - <FuncDef>bool <Function>open</Function></FuncDef> - <ParamDef>int <Parameter>m</Parameter></ParamDef> - <ParamDef>FILE *<Parameter>f</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>Q_LONG <Function>readBlock</Function></FuncDef> - <ParamDef>char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single <Literal>len</Literal> parameter. The -<Literal>data</Literal> is returned if there was no error, otherwise -<Literal>None</Literal> is returned. -</Para> - -<FuncSynopsis> - <FuncDef>Q_LONG <Function>readLine</Function></FuncDef> - <ParamDef>char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>maxlen</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single <Literal>maxlen</Literal> parameter. The -<Literal>data</Literal> is returned if there was no error, otherwise -<Literal>None</Literal> is returned. -</Para> - -<FuncSynopsis> - <FuncDef>static void <Function>setDecodingFunction</Function></FuncDef> - <ParamDef>EncoderFn <Parameter>f</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>static void <Function>setEncodingFunction</Function></FuncDef> - <ParamDef>EncoderFn <Parameter>f</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>Q_LONG <Function>writeBlock</Function></FuncDef> - <ParamDef>const char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -<Literal>len</Literal> is derived from <Literal>data</Literal> and not passed -as a parameter. -</Para> -</Sect2> -<Sect2><Title>QFileDialog</Title> -<Para> -<Literal>QFileDialog</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QFileIconProvider</Title> -<Para> -<Literal>QFileIconProvider</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QFilePreview</Title> -<Para> -<Literal>QFilePreview</Literal> is fully implemented. However it cannot be -used from Python in the same way as it is used from C++ because PyQt does not -support multiple inheritance involving more than one wrapped class. A trick -that seems to work is to use composition rather than inheritance as in the -following code fragment. -</Para> -<ProgramListing> -class FilePreview(QFilePreview): - pass - -class Preview(QLabel): - def __init__(self, parent=None): - QLabel.__init__(self, parent) - self.preview = FilePreview() - self.preview.previewUrl = self.previewUrl -</ProgramListing> -<Para> -Note that QFilePreview cannot be instantiated directly because it is abstract. -Thanks to Hans-Peter Jansen for this trick. -</Para> -</Sect2> -<Sect2><Title>QFileInfo</Title> -<Para> -<Literal>QFileInfo</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QFont</Title> -<Para> -<Literal>QFont</Literal> is fully implemented, including the Python -<Literal>==</Literal> and <Literal>!=</Literal> operators. -</Para> -</Sect2> -<Sect2><Title>QFontDatabase (Qt v2.1+)</Title> -<Para> -<Literal>QFontDatabase</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QFontDialog (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>static QFont <Function>getFont</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter></ParamDef> - <ParamDef>const QFont &<Parameter>def</Parameter></ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>def</Literal>, <Literal>parent</Literal> and -<Literal>name</Literal> parameters and returns a tuple containing the -<Literal>QFont</Literal> result and the <Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>static QFont <Function>getFont</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter></ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>parent</Literal> and <Literal>name</Literal> parameters -and returns a tuple containing the <Literal>QFont</Literal> result and the -<Literal>ok</Literal> value. -</Para> -</Sect2> -<Sect2><Title>QFontInfo</Title> -<Para> -<Literal>QFontInfo</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QFontMetrics</Title> -<FuncSynopsis> - <FuncDef>QRect <Function>boundingRect</Function></FuncDef> - <ParamDef>int <Parameter>x</Parameter></ParamDef> - <ParamDef>int <Parameter>y</Parameter></ParamDef> - <ParamDef>int <Parameter>w</Parameter></ParamDef> - <ParamDef>int <Parameter>h</Parameter></ParamDef> - <ParamDef>int <Parameter>flags</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>str</Parameter></ParamDef> - <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef> - <ParamDef>int <Parameter>tabstops</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>tabarray</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>tabarray</Literal> parameter is a Python list of integers. -</Para> - -<FuncSynopsis> - <FuncDef>QSize <Function>size</Function></FuncDef> - <ParamDef>int <Parameter>flags</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>str</Parameter></ParamDef> - <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef> - <ParamDef>int <Parameter>tabstops</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>tabarray</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>tabarray</Literal> parameter is a Python list of integers. -</Para> -</Sect2> -<Sect2><Title>QFrame</Title> -<Para> -<Literal>QFrame</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QGManager (Qt v1.x)</Title> -<Para> -<Literal>QGManager</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QChain (Qt v1.x)</Title> -<Para> -<Literal>QChain</Literal> is implemented as an opaque class. -</Para> -</Sect2> -<Sect2><Title>QGrid (Qt v2+)</Title> -<Para> -<Literal>QGrid</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QGridView (Qt v3+)</Title> -<Para> -<Literal>QGridView</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QGroupBox</Title> -<Para> -<Literal>QGroupBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QHBox (Qt v2+)</Title> -<Para> -<Literal>QHBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QHButtonGroup (Qt v2+)</Title> -<Para> -<Literal>QHButtonGroup</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QHeader</Title> -<Para> -<Literal>QHeader</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QHGroupBox (Qt v2+)</Title> -<Para> -<Literal>QHGroupBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QIconSet</Title> -<Para> -<Literal>QIconSet</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QIconFactory (Qt v3.1+)</Title> -<Para> -<Literal>QIconFactory</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QIconView (Qt v2.1+)</Title> -<FuncSynopsis> - <FuncDef>QIconViewItem *<Function>makeRowLayout</Function></FuncDef> - <ParamDef>QIconViewItem *<Parameter>begin</Parameter></ParamDef> - <ParamDef>int &<Parameter>y</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> -</Sect2> - -<Sect2><Title>QIconViewItem (Qt v2.1+)</Title> -<Para> -<Literal>QIconViewItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QIconDrag (Qt v2.1+)</Title> -<Para> -<Literal>QIconDrag</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QIconDragItem (Qt v2.1+)</Title> -<Para> -<Literal>QIconDragItem</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QImage</Title> -<Para> -The Python <Literal>==</Literal> and <Literal>!=</Literal> operators are -supported. -</Para> - -<FuncSynopsis> - <FuncDef><Function>QImage</Function></FuncDef> - <ParamDef>const char *<Parameter>xpm</Parameter>[]</ParamDef> -</FuncSynopsis> -<Para> -This takes a list of strings as its parameter. -</Para> - -<FuncSynopsis> - <FuncDef><Function>QImage</Function></FuncDef> - <ParamDef>uchar *<Parameter>data</Parameter></ParamDef> - <ParamDef>int <Parameter>w</Parameter></ParamDef> - <ParamDef>int <Parameter>h</Parameter></ParamDef> - <ParamDef>int <Parameter>depth</Parameter></ParamDef> - <ParamDef>QRgb *<Parameter>colorTable</Parameter></ParamDef> - <ParamDef>int <Parameter>numColors</Parameter></ParamDef> - <ParamDef>Endian <Parameter>bitOrder</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The <Literal>colorTable</Literal> parameter is a list of QRgb instances or -None. (Qt v2.1+) -</Para> - -<FuncSynopsis> - <FuncDef>uchar *<Function>bits</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -The return value is a <Literal>sip.voidptr</Literal> object which is only -useful if passed to another Python module. -</Para> - -<FuncSynopsis> - <FuncDef>QRgb *<Function>colorTable</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -The return value is a <Literal>sip.voidptr</Literal> object which is only -useful if passed to another Python module. -</Para> - -<FuncSynopsis> - <FuncDef>QImage <Function>convertDepthWithPalette</Function></FuncDef> - <ParamDef>int</ParamDef> - <ParamDef>QRgb *<Parameter>p</Parameter></ParamDef> - <ParamDef>int <Parameter>pc</Parameter></ParamDef> - <ParamDef>int <Parameter>cf</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>uchar **<Function>jumpTable</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -The return value is a <Literal>sip.voidptr</Literal> object which is only -useful if passed to another Python module. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>loadFromData</Function></FuncDef> - <ParamDef>const uchar *<Parameter>buf</Parameter></ParamDef> - <ParamDef>uint <Parameter>len</Parameter></ParamDef> - <ParamDef>const char *<Parameter>format</Parameter> = 0</ParamDef> - <ParamDef>ColorMode <Parameter>mode</Parameter> = Auto</ParamDef> -</FuncSynopsis> -<Para> -<Literal>len</Literal> is derived from <Literal>buf</Literal> and not passed as -a parameter. -</Para> - -<FuncSynopsis> - <FuncDef>uchar *<Function>scanLine</Function></FuncDef> - <ParamDef>int <Parameter>i</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The return value is a <Literal>sip.voidptr</Literal> object which is only -useful if passed to another Python module. -</Para> -</Sect2> - -<Sect2><Title>QImageIO</Title> -<FuncSynopsis> - <FuncDef>static void <Function>defineIOHandler</Function></FuncDef> - <ParamDef>const char *<Parameter>format</Parameter></ParamDef> - <ParamDef>const char *<Parameter>header</Parameter></ParamDef> - <ParamDef>const char *<Parameter>flags</Parameter></ParamDef> - <ParamDef>image_io_handler <Parameter>read_image</Parameter></ParamDef> - <ParamDef>image_io_handler <Parameter>write_image</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> - -<Sect2><Title>QImageTextKeyLang</Title> -<Para> -<Literal>QImageTextKeyLang</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QInputDialog (Qt v2.1+)</Title> -<FuncSynopsis> - <FuncDef>static QString <Function>getText</Function></FuncDef> - <ParamDef>const QString &<Parameter>caption</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>label</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>text</Parameter> = QString::null</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>QString</Literal> result and the <Literal>ok</Literal> flag. -(Qt v2.1 - v2.3.1) -</Para> - -<FuncSynopsis> - <FuncDef>static QString <Function>getText</Function></FuncDef> - <ParamDef>const QString &<Parameter>caption</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>label</Parameter></ParamDef> - <ParamDef>QLineEdit::EchoMode<Parameter>echo</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>text</Parameter> = QString::null</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>QString</Literal> result and the <Literal>ok</Literal> flag. -(Qt v2.2 - v2.3.1) -</Para> - -<FuncSynopsis> - <FuncDef>static QString <Function>getText</Function></FuncDef> - <ParamDef>const QString &<Parameter>caption</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>label</Parameter></ParamDef> - <ParamDef>QLineEdit::EchoMode<Parameter>echo</Parameter> = QLineEdit::Normal</ParamDef> - <ParamDef>const QString &<Parameter>text</Parameter> = QString::null</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>QString</Literal> result and the <Literal>ok</Literal> flag. -(Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>static int <Function>getInteger</Function></FuncDef> - <ParamDef>const QString &<Parameter>caption</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>label</Parameter></ParamDef> - <ParamDef>int <Parameter>num</Parameter> = 0</ParamDef> - <ParamDef>int <Parameter>from</Parameter> = -2147483647</ParamDef> - <ParamDef>int <Parameter>to</Parameter> = 2147483647</ParamDef> - <ParamDef>int <Parameter>step</Parameter> = 1</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>int</Literal> result and the <Literal>ok</Literal> flag. -</Para> - -<FuncSynopsis> - <FuncDef>static double <Function>getDouble</Function></FuncDef> - <ParamDef>const QString &<Parameter>caption</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>label</Parameter></ParamDef> - <ParamDef>double <Parameter>num</Parameter> = 0</ParamDef> - <ParamDef>double <Parameter>from</Parameter> = -2147483647</ParamDef> - <ParamDef>double <Parameter>to</Parameter> = 2147483647</ParamDef> - <ParamDef>int <Parameter>step</Parameter> = 1</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>double</Literal> result and the <Literal>ok</Literal> flag. -</Para> - -<FuncSynopsis> - <FuncDef>static QString <Function>getItem</Function></FuncDef> - <ParamDef>const QString &<Parameter>caption</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>label</Parameter></ParamDef> - <ParamDef>const QStringList &<Parameter>list</Parameter></ParamDef> - <ParamDef>int <Parameter>current</Parameter> = 0</ParamDef> - <ParamDef>bool <Parameter>editable</Parameter> = TRUE</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>QString</Literal> result and the <Literal>ok</Literal> flag. -</Para> -</Sect2> -<Sect2><Title>QInterlaceStyle (Qt v2.3.1+)</Title> -<FuncSynopsis> - <FuncDef>void <Function>scrollBarMetrics</Function></FuncDef> - <ParamDef>const QTabBar *<Parameter>sb</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef> - <ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>sb</Literal> parameter and returns a tuple of the -<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>, -<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values. -</Para> -</Sect2> -<Sect2><Title>QIODevice</Title> -<Para> -<Literal>QIODevice</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QKeySequence (Qt v3+)</Title> -<Para> -<Literal>QKeySequence</Literal> is fully implemented including the operators -<Literal>==</Literal>, <Literal>!=</Literal>, <Literal>QString()</Literal> and -<Literal>int()</Literal>. A <Literal>QString</Literal> instance or a Python -integer may be used whenever a <Literal>QKeySequence</Literal> can be used. -</Para> -</Sect2> -<Sect2><Title>QLabel</Title> -<Para> -<Literal>QLabel</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QLayout</Title> -<Para> -<Literal>QLayout</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QBoxLayout</Title> -<Para> -<Literal>QBoxLayout</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QGLayoutIterator (Qt v2+)</Title> -<Para> -<Literal>QGLayoutIterator</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QGridLayout</Title> -<FuncSynopsis> - <FuncDef>bool <Function>findWidget</Function></FuncDef> - <ParamDef>QWidget *<Parameter>w</Parameter></ParamDef> - <ParamDef>int *<Parameter>row</Parameter></ParamDef> - <ParamDef>int *<Parameter>col</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>w</Literal> parameter and returns a tuple containing -the <Literal>bool</Literal> result, <Literal>row</Literal> and -<Literal>col</Literal>. (Qt v2+) -</Para> -</Sect2> - -<Sect2><Title>QHBoxLayout</Title> -<Para> -<Literal>QHBoxLayout</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QLayoutItem (Qt v2+)</Title> -<Para> -<Literal>QLayoutItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QLayoutIterator (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>QLayoutItem *<Function>next</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This is a wrapper around the <Literal>QLayoutIterator</Literal> -<Literal>++</Literal> operator. -</Para> -</Sect2> - -<Sect2><Title>QSpacerItem (Qt v2+)</Title> -<Para> -<Literal>QSpacerItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QVBoxLayout</Title> -<Para> -<Literal>QVBoxLayout</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QWidgetItem (Qt v2+)</Title> -<Para> -<Literal>QWidgetItem</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QLCDNumber</Title> -<Para> -<Literal>QLCDNumber</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QLibrary (Qt v3+)</Title> -<Para> -<Literal>QLibrary</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QLineEdit</Title> -<FuncSynopsis> - <FuncDef>int <Function>characterAt</Function></FuncDef> - <ParamDef>int <Parameter>xpos</Parameter></ParamDef> - <ParamDef>QChar *<Parameter>chr</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>xpos</Literal> parameter and returns the int -result and the <Literal>chr</Literal> value as a tuple. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>del</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>delChar</Literal> in Python. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>getSelection</Function></FuncDef> - <ParamDef>int *<Parameter>start</Parameter></ParamDef> - <ParamDef>int *<Parameter>end</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns the bool result and the -<Literal>start</Literal> and <Literal>end</Literal> values as a tuple. -(Qt v3+) -</Para> -</Sect2> -<Sect2><Title>QList<type> (Qt v2)</Title> -<Para> -Types based on the <Literal>QList</Literal> template are automatically -converted to and from Python lists of the type. -</Para> -</Sect2> -<Sect2><Title>QListBox</Title> -<FuncSynopsis> - <FuncDef>bool <Function>itemYPos</Function></FuncDef> - <ParamDef>int <Parameter>index</Parameter></ParamDef> - <ParamDef>int *<Parameter>yPos</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>index</Literal> parameter and returns a tuple -containing the <Literal>bool</Literal> result and <Literal>yPos</Literal>. -(Qt v1.x) -</Para> -</Sect2> - -<Sect2><Title>QListBoxItem</Title> -<Para> -<Literal>QListBoxItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QListBoxPixmap</Title> -<Para> -<Literal>QListBoxPixmap</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QListBoxText</Title> -<Para> -<Literal>QListBoxText</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QListView</Title> -<Para> -<Literal>QListView</Literal> is fully implemented. -</Para> -<Para> -Note that to remove a child <Literal>QListViewItem</Literal> you must first -call <Literal>takeItem()</Literal> and then <Literal>del()</Literal>. -</Para> -</Sect2> - -<Sect2><Title>QListViewItem</Title> -<Para> -<Literal>QListViewItem</Literal> is fully implemented. -</Para> -<Para> -Note that to remove a child <Literal>QListViewItem</Literal> you must first -call <Literal>takeItem()</Literal> and then <Literal>del()</Literal>. -</Para> -</Sect2> - -<Sect2><Title>QCheckListItem</Title> -<Para> -<Literal>QCheckListItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QListViewItemIterator (Qt v2+)</Title> -<Para> -<Literal>QListViewItemIterator</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QLocale (Qt v3.3+)</Title> -<FuncSynopsis> - <FuncDef>short <Function>toShort</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>short</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>ushort <Function>toUShort</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>ushort</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>toInt</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>int</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>uint <Function>toUInt</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>uint</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>Q_LONG <Function>toLong</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>long</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>Q_ULONG <Function>toULong</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>ulong</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>float <Function>toFloat</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>float</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>double <Function>toDouble</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>double</Literal> result and the -<Literal>ok</Literal> value. -</Para> -</Sect2> -<Sect2><Title>QMainWindow</Title> -<FuncSynopsis> - <FuncDef>QTextStream &<Function>operator<<</Function></FuncDef> - <ParamDef>QTextStream &<Parameter></Parameter></ParamDef> - <ParamDef>const QMainWindow &<Parameter></Parameter></ParamDef> -</FuncSynopsis> -<Para> -This operator is fully implemented. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>QTextStream &<Function>operator>></Function></FuncDef> - <ParamDef>QTextStream &<Parameter></Parameter></ParamDef> - <ParamDef>QMainWindow &<Parameter></Parameter></ParamDef> -</FuncSynopsis> -<Para> -This operator is fully implemented. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>getLocation</Function></FuncDef> - <ParamDef>QToolBar *<Parameter>tb</Parameter></ParamDef> - <ParamDef>ToolBarDock &<Parameter>dock</Parameter></ParamDef> - <ParamDef>int &<Parameter>index</Parameter></ParamDef> - <ParamDef>bool &<Parameter>nl</Parameter></ParamDef> - <ParamDef>int &<Parameter>extraOffset</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>tb</Literal> parameter and returns a tuple of the -result, <Literal>dock</Literal>, <Literal>index</Literal>, -<Literal>nl</Literal> and <Literal>extraOffset</Literal> values. (Qt v2.1.0+) -</Para> - -<FuncSynopsis> - <FuncDef>QList<QToolBar> <Function>toolBars</Function></FuncDef> - <ParamDef>ToolBarDock <Parameter>dock</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This returns a list of <Literal>QToolBar</Literal> instances. (Qt v2.1.0+) -</Para> -</Sect2> -<Sect2><Title>QMemArray<type> (Qt v3+)</Title> -<Para> -Types based on the <Literal>QMemArray</Literal> template are automatically -converted to and from Python lists of the type. -</Para> -</Sect2> -<Sect2><Title>QMenuBar</Title> -<Para> -<Literal>QMenuBar</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QMenuData</Title> -<FuncSynopsis> - <FuncDef>QMenuItem *<Function>findItem</Function></FuncDef> - <ParamDef>int <Parameter>id</Parameter></ParamDef> - <ParamDef>QMenuData **<Parameter>parent</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> - -<Sect2><Title>QCustomMenuItem (Qt v2.1+)</Title> -<Para> -<Literal>QCustomMenuItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QMenuItem</Title> -<Para> -<Literal>QMenuItem</Literal> is an internal Qt class. -</Para> -</Sect2> -<Sect2><Title>QMessageBox</Title> -<Para> -<Literal>QMessageBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QMetaObject</Title> -<FuncSynopsis> - <FuncDef>int <Function>numClassInfo</Function> const</FuncDef> - <ParamDef>bool <Parameter>super</Parameter> = FALSE</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>const QClassInfo *<Function>classInfo</Function> const</FuncDef> - <ParamDef>bool <Parameter>super</Parameter> = FALSE</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> - -<Sect2><Title>QMetaProperty</Title> -<Para> -<Literal>QMetaProperty</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QMimeSource (Qt v2+)</Title> -<Para> -<Literal>QMimeSource</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QMimeSourceFactory (Qt v2+)</Title> -<Para> -<Literal>QMimeSourceFactory</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QWindowsMime (Qt v3+)</Title> -<Para> -<Literal>QWindowsMime</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QMotifPlusStyle (Qt v2.2+)</Title> -<FuncSynopsis> - <FuncDef>void <Function>getButtonShift</Function></FuncDef> - <ParamDef>int &<Parameter>x</Parameter></ParamDef> - <ParamDef>int &<Parameter>y</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the <Literal>x</Literal> and -<Literal>y</Literal> values. (Qt v2) -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>scrollBarMetrics</Function></FuncDef> - <ParamDef>const QScrollBar *<Parameter>sb</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef> - <ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>sb</Literal> parameter and returns a tuple of the -<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>, -<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values. -(Qt v2) -</Para> -</Sect2> -<Sect2><Title>QMotifStyle (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>void <Function>scrollBarMetrics</Function></FuncDef> - <ParamDef>const QTabBar *<Parameter>sb</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef> - <ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>sb</Literal> parameter and returns a tuple of the -<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>, -<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values. -(Qt v2) -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>tabbarMetrics</Function></FuncDef> - <ParamDef>const QTabBar *<Parameter>t</Parameter></ParamDef> - <ParamDef>int &<Parameter>hframe</Parameter></ParamDef> - <ParamDef>int &<Parameter>vframe</Parameter></ParamDef> - <ParamDef>int &<Parameter>overlap</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>t</Literal> parameter and returns a tuple of the -<Literal>hframe</Literal>, <Literal>vframe</Literal> and -<Literal>overlap</Literal> values. (Qt v2) -</Para> -</Sect2> -<Sect2><Title>QMovie</Title> -<FuncSynopsis> - <FuncDef><Function>QMovie</Function></FuncDef> - <ParamDef>QDataSource *<Parameter>src</Parameter></ParamDef> - <ParamDef>int <Parameter>bufsize</Parameter> = 1024</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>pushData</Function></FuncDef> - <ParamDef>const uchar *<Parameter>data</Parameter></ParamDef> - <ParamDef>int <Parameter>length</Parameter></ParamDef> -</FuncSynopsis> -<Para> -<Literal>length</Literal> is derived from <Literal>data</Literal> and not -passed as a parameter. (Qt v2.2.0+) -</Para> -</Sect2> -<Sect2><Title>QMultiLineEdit</Title> -<FuncSynopsis> - <FuncDef>void <Function>cursorPosition</Function> const</FuncDef> - <ParamDef>int *<Parameter>line</Parameter></ParamDef> - <ParamDef>int *<Parameter>col</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the <Literal>line</Literal> and -<Literal>col</Literal> values. (Qt v1.x, Qt v2.x) -</Para> - -<FuncSynopsis> - <FuncDef>virtual void <Function>del</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>delChar</Literal> in Python. (Qt v1.x, Qt v2.x) -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>getCursorPosition</Function> const</FuncDef> - <ParamDef>int *<Parameter>line</Parameter></ParamDef> - <ParamDef>int *<Parameter>col</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the <Literal>line</Literal> and -<Literal>col</Literal> values. (Qt v1.x, Qt v2.x) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>getMarkedRegion</Function></FuncDef> - <ParamDef>int *<Parameter>line1</Parameter></ParamDef> - <ParamDef>int *<Parameter>col1</Parameter></ParamDef> - <ParamDef>int *<Parameter>line2</Parameter></ParamDef> - <ParamDef>int *<Parameter>col2</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the bool result and the -<Literal>line1</Literal>, <Literal>col1</Literal>, <Literal>line2</Literal> and -<Literal>col2</Literal> values. -</Para> -</Sect2> -<Sect2><Title>QMutex (Qt v2.2+)</Title> -<Para> -<Literal>QMutex</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QMutexLocker (Qt v3.1+)</Title> -<Para> -<Literal>QMutexLocker</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QNetworkOperation (Qt v2.1+)</Title> -<Para> -<Literal>QNetworkOperation</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QNetworkProtocol (Qt v2.1+)</Title> -<Para> -<Literal>QNetworkProtocol</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QNetworkProtocolFactoryBase (Qt v2.1+)</Title> -<Para> -<Literal>QNetworkProtocolFactoryBase</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QObject</Title> -<FuncSynopsis> - <FuncDef>bool <Function>disconnect</Function></FuncDef> - <ParamDef>const QObject *<Parameter>receiver</Parameter></ParamDef> - <ParamDef>const char *<Parameter>member</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>disconnect</Function></FuncDef> - <ParamDef>const char *<Parameter>signal</Parameter> = 0</ParamDef> - <ParamDef>const QObject *<Parameter>receiver</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>member</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>static bool <Function>disconnect</Function></FuncDef> - <ParamDef>const QObject *<Parameter>sender</Parameter></ParamDef> - <ParamDef>const char *<Parameter>signal</Parameter></ParamDef> - <ParamDef>const QObject *<Parameter>receiver</Parameter></ParamDef> - <ParamDef>const char *<Parameter>member</Parameter></ParamDef> -</FuncSynopsis> -<Para> -At the moment PyQt does not support the full behaviour of the corresponding Qt -method. In particular, specifying None (ie. 0 in C++) for the -<Literal>signal</Literal> and <Literal>receiver</Literal> parameters is not yet -supported. -</Para> -</Sect2> -<Sect2><Title>QObjectCleanupHandler (Qt v3+)</Title> -<Para> -<Literal>QObjectCleanupHandler</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QObjectList</Title> -<Para> -This class isn't implemented. Whenever a <Literal>QObjectList</Literal> is the -return type of a function or the type of an argument, a Python list of -<Literal>QObject</Literal> instances is used instead. -</Para> -</Sect2> -<Sect2><Title>QPaintDeviceMetrics</Title> -<Para> -<Literal>QPaintDeviceMetrics</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QPaintDevice</Title> -<FuncSynopsis> - <FuncDef>virtual bool <Function>cmd</Function></FuncDef> - <ParamDef>int</ParamDef> - <ParamDef>QPainter *</ParamDef> - <ParamDef>QPDevCmdParam *</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QPainter</Title> -<FuncSynopsis> - <FuncDef>QRect <Function>boundingRect</Function></FuncDef> - <ParamDef>int <Parameter>x</Parameter></ParamDef> - <ParamDef>int <Parameter>y</Parameter></ParamDef> - <ParamDef>int <Parameter>w</Parameter></ParamDef> - <ParamDef>int <Parameter>h</Parameter></ParamDef> - <ParamDef>int <Parameter>flags</Parameter></ParamDef> - <ParamDef>const char *<Parameter>str</Parameter></ParamDef> - <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef> - <ParamDef>char **<Parameter>intern</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>intern</Literal> parameter is not supported. -</Para> - -<FuncSynopsis> - <FuncDef>QRect <Function>boundingRect</Function></FuncDef> - <ParamDef>const QRect&</ParamDef> - <ParamDef>int <Parameter>flags</Parameter></ParamDef> - <ParamDef>const char *<Parameter>str</Parameter></ParamDef> - <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef> - <ParamDef>char **<Parameter>intern</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>intern</Literal> parameter is not supported. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>drawText</Function></FuncDef> - <ParamDef>int <Parameter>x</Parameter></ParamDef> - <ParamDef>int <Parameter>y</Parameter></ParamDef> - <ParamDef>int <Parameter>w</Parameter></ParamDef> - <ParamDef>int <Parameter>h</Parameter></ParamDef> - <ParamDef>int <Parameter>flags</Parameter></ParamDef> - <ParamDef>const char *<Parameter>str</Parameter></ParamDef> - <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef> - <ParamDef>QRect *<Parameter>br</Parameter> = 0</ParamDef> - <ParamDef>char **<Parameter>intern</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>intern</Literal> parameter is not supported. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>drawText</Function></FuncDef> - <ParamDef>const QRect&</ParamDef> - <ParamDef>int <Parameter>flags</Parameter></ParamDef> - <ParamDef>const char *<Parameter>str</Parameter></ParamDef> - <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef> - <ParamDef>QRect *<Parameter>br</Parameter> = 0</ParamDef> - <ParamDef>char **<Parameter>intern</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>intern</Literal> parameter is not supported. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>setTabArray</Function></FuncDef> - <ParamDef>int *<Parameter>ta</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single parameter which is a list of tab stops. -</Para> - -<FuncSynopsis> - <FuncDef>int *<Function>tabArray</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This returns a list of tab stops. -</Para> -</Sect2> -<Sect2><Title>QPalette</Title> -<Para> -<Literal>QPalette</Literal> is fully implemented, including the Python -<Literal>==</Literal> and <Literal>!=</Literal> operators. -</Para> -</Sect2> -<Sect2><Title>QPixmap</Title> -<FuncSynopsis> - <FuncDef><Function>QPixmap</Function></FuncDef> - <ParamDef>const char *<Parameter>xpm</Parameter>[]</ParamDef> -</FuncSynopsis> -<Para> -This takes a list of strings as its parameter. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>loadFromData</Function></FuncDef> - <ParamDef>const uchar *<Parameter>buf</Parameter></ParamDef> - <ParamDef>uint <Parameter>len</Parameter></ParamDef> - <ParamDef>const char *<Parameter>format</Parameter> = 0</ParamDef> - <ParamDef>ColorMode <Parameter>mode</Parameter> = Auto</ParamDef> -</FuncSynopsis> -<Para> -<Literal>len</Literal> is derived from <Literal>buf</Literal> and not passed as -a parameter. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>loadFromData</Function></FuncDef> - <ParamDef>const uchar *<Parameter>buf</Parameter></ParamDef> - <ParamDef>uint <Parameter>len</Parameter></ParamDef> - <ParamDef>const char *<Parameter>format</Parameter></ParamDef> - <ParamDef>int <Parameter>conversion_flags</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QPixmapCache (Qt v3+)</Title> -<Para> -<Literal>QPixmapCache</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QPair<type,type> (Qt v3+)</Title> -<Para> -Types based on the <Literal>QPair</Literal> template are automatically -converted to and from Python tuples of two elements. -</Para> -</Sect2> -<Sect2><Title>QPen</Title> -<Para> -<Literal>QPen</Literal> is fully implemented, including the Python -<Literal>==</Literal> and <Literal>!=</Literal> operators. -</Para> -</Sect2> -<Sect2><Title>QPicture</Title> -<FuncSynopsis> - <FuncDef>const char *<Function>data</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>setData</Function></FuncDef> - <ParamDef>const char *<Parameter>data</Parameter></ParamDef> - <ParamDef>uint <Parameter>size</Parameter></ParamDef> -</FuncSynopsis> -<Para> -<Literal>size</Literal> is derived from <Literal>data</Literal> and not passed -as a parameter. -</Para> -</Sect2> -<Sect2><Title>QPlatinumStyle (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>void <Function>scrollBarMetrics</Function></FuncDef> - <ParamDef>const QTabBar *<Parameter>sb</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef> - <ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>sb</Literal> parameter and returns a tuple of the -<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>, -<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values. -(Qt v2) -</Para> -</Sect2> -<Sect2><Title>QPoint</Title> -<Para> -The Python -<Literal>+</Literal>, <Literal>+=</Literal>, -<Literal>-</Literal>, <Literal>-=</Literal>, unary <Literal>-</Literal>, -<Literal>*</Literal>, <Literal>*=</Literal>, -<Literal>/</Literal>, <Literal>/=</Literal>, -<Literal>==</Literal>, <Literal>!=</Literal> and <Literal>__nonzero__</Literal> -operators are supported. -</Para> - -<FuncSynopsis> - <FuncDef>QCOORD &<Function>rx</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QCOORD &<Function>ry</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QPointArray</Title> -<FuncSynopsis> - <FuncDef><Function>QPointArray</Function></FuncDef> - <ParamDef>int <Parameter>nPoints</Parameter></ParamDef> - <ParamDef>const QCOORD *<Parameter>points</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single parameter which is a list of points. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>point</Function></FuncDef> - <ParamDef>uint <Parameter>i</Parameter></ParamDef> - <ParamDef>int *<Parameter>x</Parameter></ParamDef> - <ParamDef>int *<Parameter>y</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the single parameter <Literal>i</Literal> and returns the -<Literal>x</Literal> and <Literal>y</Literal> values as a tuple. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>putPoints</Function></FuncDef> - <ParamDef>int <Parameter>index</Parameter></ParamDef> - <ParamDef>int <Parameter>nPoints</Parameter></ParamDef> - <ParamDef>const QCOORD *<Parameter>points</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes two parameters, <Literal>index</Literal> and a list of points. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>putPoints</Function></FuncDef> - <ParamDef>int <Parameter>index</Parameter></ParamDef> - <ParamDef>int <Parameter>nPoints</Parameter></ParamDef> - <ParamDef>int <Parameter>firstx</Parameter></ParamDef> - <ParamDef>int <Parameter>firsty</Parameter></ParamDef> - <ParamDef>...</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setPoints</Function></FuncDef> - <ParamDef>int <Parameter>nPoints</Parameter></ParamDef> - <ParamDef>const QCOORD *<Parameter>points</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single parameter which is a list of points. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setPoints</Function></FuncDef> - <ParamDef>int <Parameter>nPoints</Parameter></ParamDef> - <ParamDef>int <Parameter>firstx</Parameter></ParamDef> - <ParamDef>int <Parameter>firsty</Parameter></ParamDef> - <ParamDef>...</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QPopupMenu</Title> -<FuncSynopsis> - <FuncDef>int <Function>exec</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>exec_loop</Literal> in Python. -</Para> -<Para> -This method also causes ownership of the underlying C++ menu to be transfered -to Python. This means that the C++ menu will be deleted when the Python -wrapper is garbage collected. Although this is a little inconsistent, it -ensures that the menu is deleted without having to explicity code it using -<Literal>QObject.deleteLater()</Literal> or other techniques. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>exec</Function></FuncDef> - <ParamDef>const QPoint &<Parameter>pos</Parameter></ParamDef> - <ParamDef>int <Parameter>indexAtPoint</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>exec_loop</Literal> in Python. -</Para> -<Para> -This method also causes ownership of the underlying C++ menu to be transfered -to Python. This means that the C++ menu will be deleted when the Python -wrapper is garbage collected. Although this is a little inconsistent, it -ensures that the menu is deleted without having to explicity code it using -<Literal>QObject.deleteLater()</Literal> or other techniques. -</Para> -</Sect2> -<Sect2><Title>QPrintDialog (X11)</Title> -<Para> -<Literal>QPrintDialog</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QPrinter</Title> -<Para> -<Literal>QPrinter</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QProcess (Qt v3+)</Title> -<Para> -<Literal>QProcess</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QProgressBar</Title> -<Para> -<Literal>QProgressBar</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QProgressDialog</Title> -<Para> -<Literal>QProgressDialog</Literal> is fully implemented. -value. -</Para> -</Sect2> -<Sect2><Title>QPtrList<type> (Qt v2+)</Title> -<Para> -Types based on the <Literal>QPtrList</Literal> template are automatically -converted to and from Python lists of the type. -</Para> -</Sect2> -<Sect2><Title>QPushButton</Title> -<Para> -<Literal>QPushButton</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QRadioButton</Title> -<Para> -<Literal>QRadioButton</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QRangeControl</Title> -<Para> -<Literal>QRangeControl</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QRect</Title> -<Para> -The Python -<Literal>&</Literal>, <Literal>&=</Literal>, -<Literal>|</Literal>, <Literal>|=</Literal>, -<Literal>==</Literal>, <Literal>!=</Literal>, <Literal>in</Literal> and -<Literal>__nonzero__</Literal> operators are supported. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>coords</Function></FuncDef> - <ParamDef>int *<Parameter>x1</Parameter></ParamDef> - <ParamDef>int *<Parameter>y1</Parameter></ParamDef> - <ParamDef>int *<Parameter>x2</Parameter></ParamDef> - <ParamDef>int *<Parameter>y2</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple containing the four values. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>rect</Function></FuncDef> - <ParamDef>int *<Parameter>x</Parameter></ParamDef> - <ParamDef>int *<Parameter>y</Parameter></ParamDef> - <ParamDef>int *<Parameter>w</Parameter></ParamDef> - <ParamDef>int *<Parameter>h</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple containing the four values. -</Para> - -<FuncSynopsis> - <FuncDef>QCOORD &<Function>rBottom</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>QCOORD &<Function>rLeft</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>QCOORD &<Function>rRight</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>QCOORD &<Function>rTop</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. (Qt v2+) -</Para> -</Sect2> -<Sect2><Title>QRegExp</Title> -<Para> -The Python <Literal>==</Literal> and <Literal>!=</Literal> operators are -supported. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>match</Function></FuncDef> - <ParamDef>const char *<Parameter>str</Parameter></ParamDef> - <ParamDef>int <Parameter>index</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>len</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes <Literal>str</Literal> and <Literal>index</Literal> parameters and -returns a tuple of the <Literal>int</Literal> result and the -<Literal>len</Literal> value. (Qt v1.x) -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>match</Function></FuncDef> - <ParamDef>const QString &<Parameter>str</Parameter></ParamDef> - <ParamDef>int <Parameter>index</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>len</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes <Literal>str</Literal> and <Literal>index</Literal> parameters and -returns a tuple of the <Literal>int</Literal> result and the -<Literal>len</Literal> value. (Qt v2+) -</Para> -</Sect2> -<Sect2><Title>QRegion</Title> -<Para> -The Python -<Literal>|</Literal>, <Literal>|=</Literal>, -<Literal>+</Literal>, <Literal>+=</Literal>, -<Literal>&</Literal>, <Literal>&=</Literal>, -<Literal>-</Literal>, <Literal>-=</Literal>, -<Literal>^</Literal>, <Literal>^=</Literal>, -<Literal>==</Literal>, <Literal>!=</Literal>, <Literal>in</Literal> and -<Literal>__nonzero__</Literal> operators are supported. -</Para> - -<FuncSynopsis> - <FuncDef>QArray<QRect> <Function>rects</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>setRects</Function></FuncDef> - <ParamDef>QRect *<Parameter>rects</Parameter></ParamDef> - <ParamDef>int <Parameter>num</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v2.2+) -</Para> -</Sect2> -<Sect2><Title>QScrollBar</Title> -<Para> -<Literal>QScrollBar</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QScrollView</Title> -<FuncSynopsis> - <FuncDef>void <Function>contentsToViewport</Function></FuncDef> - <ParamDef>int <Parameter>x</Parameter></ParamDef> - <ParamDef>int <Parameter>y</Parameter></ParamDef> - <ParamDef>int &<Parameter>vx</Parameter></ParamDef> - <ParamDef>int &<Parameter>vy</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>x</Literal> and <Literal>y</Literal> parameters and -returns a tuple containing the <Literal>vx</Literal> and <Literal>vy</Literal> -values. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>viewportToContents</Function></FuncDef> - <ParamDef>int <Parameter>vx</Parameter></ParamDef> - <ParamDef>int <Parameter>vy</Parameter></ParamDef> - <ParamDef>int &<Parameter>x</Parameter></ParamDef> - <ParamDef>int &<Parameter>y</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>vx</Literal> and <Literal>vy</Literal> parameters and -returns a tuple containing the <Literal>x</Literal> and <Literal>y</Literal> -values. (Qt v2+) -</Para> -</Sect2> -<Sect2><Title>QSemaphore (Qt v2.2+)</Title> -<Para> -<Literal>QSemaphore</Literal> is fully implemented. The <Literal>+=</Literal> -and <Literal>-=</Literal> operators have also been implemented, but require -Python v2.0 or later. -</Para> -</Sect2> -<Sect2><Title>QSemiModal (Qt v1, v2)</Title> -<Para> -<Literal>QSemiModal</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSessionManager (Qt v2+)</Title> -<Para> -<Literal>QSessionManager</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSettings (Qt v3+)</Title> -<FuncSynopsis> - <FuncDef>bool <Function>readBoolEntry</Function></FuncDef> - <ParamDef>const QString &<Parameter>key</Parameter></ParamDef> - <ParamDef>bool <Parameter>def</Parameter> = 0</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>bool</Literal> result and the <Literal>ok</Literal> flag. -</Para> - -<FuncSynopsis> -<FuncDef>double <Function>readDoubleEntry</Function></FuncDef> - <ParamDef>const QString &<Parameter>key</Parameter></ParamDef> - <ParamDef>double <Parameter>def</Parameter> = 0</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>double</Literal> result and the <Literal>ok</Literal> flag. -</Para> - -<FuncSynopsis> -<FuncDef>QString <Function>readEntry</Function></FuncDef> - <ParamDef>const QString &<Parameter>key</Parameter></ParamDef> - <ParamDef>const QString &<Parameter>def</Parameter> = QString::null</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>QString</Literal> result and the <Literal>ok</Literal> flag. -</Para> - -<FuncSynopsis> -<FuncDef>QStringList <Function>readListEntry</Function></FuncDef> - <ParamDef>const QString &<Parameter>key</Parameter></ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>QStringList</Literal> result and the <Literal>ok</Literal> flag. -</Para> - -<FuncSynopsis> -<FuncDef>QStringList <Function>readListEntry</Function></FuncDef> - <ParamDef>const QString &<Parameter>key</Parameter></ParamDef> - <ParamDef>const QChar &<Parameter>separator</Parameter></ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>QStringList</Literal> result and the <Literal>ok</Literal> flag. -</Para> - -<FuncSynopsis> -<FuncDef>int <Function>readNumEntry</Function></FuncDef> - <ParamDef>const QString &<Parameter>key</Parameter></ParamDef> - <ParamDef>int <Parameter>def</Parameter> = 0</ParamDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>ok</Literal> is not passed and the returned value is a tuple of -the <Literal>int</Literal> result and the <Literal>ok</Literal> flag. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>writeEntry</Function></FuncDef> - <ParamDef>const QString &<Parameter>key</Parameter></ParamDef> - <ParamDef>bool <Parameter>value</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QSGIStyle (Qt v2.2+)</Title> -<FuncSynopsis> - <FuncDef>void <Function>scrollBarMetrics</Function></FuncDef> - <ParamDef>const QScrollBar *<Parameter>sb</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef> - <ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>sb</Literal> parameter and returns a tuple of the -<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>, -<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values. -(Qt v2) -</Para> -</Sect2> -<Sect2><Title>QSignalMapper</Title> -<Para> -<Literal>QSignalMapper</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSimpleRichText (Qt v2+)</Title> -<Para> -<Literal>QSimpleRichText</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSize</Title> -<Para> -The Python -<Literal>+</Literal>, <Literal>+=</Literal>, -<Literal>-</Literal>, <Literal>-=</Literal>, -<Literal>*</Literal>, <Literal>*=</Literal>, -<Literal>/</Literal>, <Literal>/=</Literal>, -<Literal>==</Literal>, <Literal>!=</Literal> and <Literal>__nonzero__</Literal> -operators are supported. -</Para> - -<FuncSynopsis> - <FuncDef>QCOORD &<Function>rheight</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QCOORD &<Function>rwidth</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QSizeGrip (Qt v2+)</Title> -<Para> -<Literal>QSizeGrip</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSizePolicy (Qt v2+)</Title> -<Para> -<Literal>QSizePolicy</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSlider</Title> -<Para> -<Literal>QSlider</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSocketNotifier</Title> -<Para> -<Literal>QSocketNotifier</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSound (Qt v2.2+)</Title> -<Para> -<Literal>QSound</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSpinBox</Title> -<FuncSynopsis> - <FuncDef>virtual int <Function>mapTextToValue</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>int</Literal> result and the modified -<Literal>ok</Literal> value. -</Para> -</Sect2> -<Sect2><Title>QSplashScreen (Qt v3.2.0+)</Title> -<Para> -<Literal>QSplashScreen</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSplitter</Title> -<FuncSynopsis> - <FuncDef>void <Function>getRange</Function></FuncDef> - <ParamDef>int <Parameter>id</Parameter></ParamDef> - <ParamDef>int *<Parameter>min</Parameter></ParamDef> - <ParamDef>int *<Parameter>max</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>id</Literal> parameter and returns the -<Literal>min</Literal> and <Literal>max</Literal> values as a tuple. (Qt v2+) -</Para> -</Sect2> -<Sect2><Title>QStatusBar</Title> -<Para> -<Literal>QStatusBar</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QChar (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>uchar &<Function>cell</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>uchar &<Function>row</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> - -<Sect2><Title>QString</Title> -<Para> -A Python string object (or Unicode object) can be used whenever a -<Literal>QString</Literal> can be used. A <Literal>QString</Literal> can be -converted to a Python string object using the Python <Literal>str()</Literal> -function, and to a Python Unicode object using the Python -<Literal>unicode()</Literal> function. -</Para> - -<Para> -The Python <Literal>+</Literal>, <Literal>+=</Literal>, <Literal>*</Literal>, -<Literal>*=</Literal>, <Literal>len</Literal>, <Literal>[]</Literal> -(for reading slices and individual characters), <Literal>in</Literal> and -comparison operators are supported. -</Para> - -<FuncSynopsis> - <FuncDef>QCharRef <Function>at</Function></FuncDef> - <ParamDef>uint <Parameter>i</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>QChar <Function>constref</Function> const</FuncDef> - <ParamDef>uint <Parameter>i</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>QChar &<Function>ref</Function></FuncDef> - <ParamDef>uint <Parameter>i</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v2+) -</Para> - -<FuncSynopsis> - <FuncDef>QString &<Function>setUnicodeCodes</Function></FuncDef> - <ParamDef>const ushort *<Parameter>unicode_as_shorts</Parameter></ParamDef> - <ParamDef>uint <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v2.1+) -</Para> - -<FuncSynopsis> - <FuncDef>QString &<Function>sprintf</Function></FuncDef> - <ParamDef>const char *<Parameter>format</Parameter></ParamDef> - <ParamDef>...</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>short <Function>toShort</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>short</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>ushort <Function>toUShort</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>ushort</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>toInt</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>int</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>uint <Function>toUInt</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>uint</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>long <Function>toLong</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>long</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>ulong <Function>toULong</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>ulong</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>float <Function>toFloat</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>float</Literal> result and the -<Literal>ok</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>double <Function>toDouble</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>double</Literal> result and the -<Literal>ok</Literal> value. -</Para> -</Sect2> -<Sect2><Title>QStringList (Qt v2+)</Title> -<Para> -The Python <Literal>len</Literal>, <Literal>[]</Literal> (for both reading and -writing slices and individual elements), <Literal>del</Literal> (for deleting -slices and individual elements), <Literal>+</Literal>, <Literal>+=</Literal>, -<Literal>*</Literal>, <Literal>*=</Literal>, <Literal>==</Literal>, -<Literal>!=</Literal> and <Literal>in</Literal> operators are supported. -</Para> - -<FuncSynopsis> - <FuncDef>Iterator <Function>append</Function></FuncDef> - <ParamDef>const QString &<Parameter>x</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This does not return a value. -</Para> - -<FuncSynopsis> - <FuncDef>Iterator <Function>prepend</Function></FuncDef> - <ParamDef>const QString &<Parameter>x</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This does not return a value. -</Para> -</Sect2> -<Sect2><Title>QStrList</Title> -<Para> -This class isn't implemented. Whenever a <Literal>QStrList</Literal> is the -return type of a function or the type of an argument, a Python list of strings -is used instead. -</Para> -</Sect2> -<Sect2><Title>QStyle (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>virtual void <Function>getButtonShift</Function></FuncDef> - <ParamDef>int &<Parameter>x</Parameter></ParamDef> - <ParamDef>int &<Parameter>y</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the <Literal>x</Literal> and -<Literal>y</Literal> values. (Qt v2) -</Para> - -<FuncSynopsis> - <FuncDef>virtual void <Function>scrollBarMetrics</Function></FuncDef> - <ParamDef>const QScrollBar *<Parameter>b</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef> - <ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Thus takes only the <Literal>b</Literal> parameter and returns a tuple of the -<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>, -<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values. -(Qt v2) -</Para> - -<FuncSynopsis> - <FuncDef>virtual void <Function>tabbarMetrics</Function></FuncDef> - <ParamDef>const QTabBar *<Parameter>t</Parameter></ParamDef> - <ParamDef>int &<Parameter>hframe</Parameter></ParamDef> - <ParamDef>int &<Parameter>vframe</Parameter></ParamDef> - <ParamDef>int &<Parameter>overlap</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>t</Literal> parameter and returns a tuple of the -<Literal>hframe</Literal>, <Literal>vframe</Literal> and -<Literal>overlap</Literal> values. (Qt v2) -</Para> -</Sect2> - -<Sect2><Title>QStyleOption (Qt v3+)</Title> -<Para> -<Literal>QStyleOption</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QStyleSheet (Qt v2+)</Title> -<Para> -<Literal>QStyleSheet</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QStyleSheetItem (Qt v2+)</Title> -<Para> -<Literal>QStyleSheetItem</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSyntaxHighlighter (Qt v3.1+)</Title> -<Para> -<Literal>QSyntaxHighlighter</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QTab</Title> -<Para> -<Literal>QTab</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTabBar</Title> -<FuncSynopsis> - <FuncDef>QList<QTab> <Function>tabList</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This returns a list of <Literal>QTab</Literal> instances. -</Para> -</Sect2> -<Sect2><Title>QTabDialog</Title> -<Para> -<Literal>QTabDialog</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QTableView (Qt 1.x, Qt 2.x)</Title> -<FuncSynopsis> - <FuncDef>bool <Function>colXPos</Function></FuncDef> - <ParamDef>int <Parameter>col</Parameter></ParamDef> - <ParamDef>int *<Parameter>xPos</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>col</Literal> parameter and returns a tuple containing -the <Literal>bool</Literal> result and <Literal>xPos</Literal>. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>rowYPos</Function></FuncDef> - <ParamDef>int <Parameter>row</Parameter></ParamDef> - <ParamDef>int *<Parameter>yPos</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>row</Literal> parameter and returns a tuple containing -the <Literal>bool</Literal> result and <Literal>yPos</Literal>. -</Para> -</Sect2> -<Sect2><Title>QTabWidget (Qt v2+)</Title> -<Para> -<Literal>QTabWidget</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QTextBrowser (Qt v2+)</Title> -<Para> -<Literal>QTextBrowser</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QTextCodec (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>virtual QCString <Function>fromUnicode</Function></FuncDef> - <ParamDef>const QString &<Parameter>uc</Parameter></ParamDef> - <ParamDef>int &<Parameter>lenInOut</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The returned value is a tuple of the <Literal>QCString</Literal> result and the -updated <Literal>lenInOut</Literal>. -</Para> -</Sect2> - -<Sect2><Title>QTextDecoder (Qt v2+)</Title> -<Para> -<Literal>QTextDecoder</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTextEncoder (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>virtual QCString <Function>fromUnicode</Function> = 0</FuncDef> - <ParamDef>const QString &<Parameter>uc</Parameter></ParamDef> - <ParamDef>int &<Parameter>lenInOut</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The returned value is a tuple of the <Literal>QCString</Literal> result and the -updated <Literal>lenInOut</Literal>. -</Para> -</Sect2> -<Sect2><Title>QTextEdit (Qt v3+)</Title> -<FuncSynopsis> -<FuncDef>int <Function>charAt</Function></FuncDef> - <ParamDef>const QPoint &<Parameter>pos</Parameter></ParamDef> - <ParamDef>int *<Parameter>para</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>pos</Literal> parameter and returns a tuple of the -value returned via the <Literal>para</Literal> pointer and the int result. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>del</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>delChar</Literal> in Python. -</Para> - -<FuncSynopsis> -<FuncDef>virtual bool <Function>find</Function></FuncDef> - <ParamDef>const QString &<Parameter>expr</Parameter></ParamDef> - <ParamDef>bool <Parameter>cs</Parameter></ParamDef> - <ParamDef>bool <Parameter>wo</Parameter></ParamDef> - <ParamDef>bool <Parameter>forward</Parameter> = TRUE</ParamDef> - <ParamDef>int *<Parameter>para</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>index</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -If the <Literal>para</Literal> and <Literal>index</Literal> parameters are -omitted then the bool result is returned. If both are supplied (as integers) -then a tuple of the bool result and the modified values of -<Literal>para</Literal> and <Literal>index</Literal> is returned. -</Para> - -<FuncSynopsis> -<FuncDef>void <Function>getCursorPosition</Function></FuncDef> - <ParamDef>int *<Parameter>para</Parameter></ParamDef> - <ParamDef>int *<Parameter>index</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the values returned via the -<Literal>para</Literal> and <Literal>index</Literal> pointers. -</Para> - -<FuncSynopsis> -<FuncDef>void <Function>getSelection</Function></FuncDef> - <ParamDef>int *<Parameter>paraFrom</Parameter></ParamDef> - <ParamDef>int *<Parameter>indexFrom</Parameter></ParamDef> - <ParamDef>int *<Parameter>paraTo</Parameter></ParamDef> - <ParamDef>int *<Parameter>indexTo</Parameter></ParamDef> - <ParamDef>int <Parameter>selNum</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>selNum</Literal> parameter and returns a tuple of -the <Literal>paraFrom</Literal>, <Literal>indexFrom</Literal>, -<Literal>paraTo</Literal> and <Literal>indexTo</Literal> values. -</Para> -</Sect2> -<Sect2><Title>QTextStream</Title> -<FuncSynopsis> - <FuncDef><Function>QTextStream</Function></FuncDef> - <ParamDef>FILE *<Parameter>fp</Parameter></ParamDef> - <ParamDef>int <Parameter>mode</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QTextStream &<Function>readRawBytes</Function></FuncDef> - <ParamDef>char *<Parameter>buf</Parameter></ParamDef> - <ParamDef>uint <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QTextStream &<Function>writeRawBytes</Function></FuncDef> - <ParamDef>const char *<Parameter>buf</Parameter></ParamDef> - <ParamDef>uint <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> -</Sect2> - -<Sect2><Title>QTextIStream (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef><Function>QTextIStream</Function></FuncDef> - <ParamDef>FILE *<Parameter>fp</Parameter></ParamDef> - <ParamDef>int <Parameter>mode</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> - -<Sect2><Title>QTextOStream (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef><Function>QTextOStream</Function></FuncDef> - <ParamDef>FILE *<Parameter>fp</Parameter></ParamDef> - <ParamDef>int <Parameter>mode</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QTextView (Qt v2+)</Title> -<Para> -<Literal>QTextView</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QThread (Qt v2.2+)</Title> -<Para> -<Literal>QThread</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QTimer</Title> -<Para> -<Literal>QTimer</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QToolBar</Title> -<Para> -<Literal>QToolBar</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QToolBox (Qt v3.2.0+)</Title> -<Para> -<Literal>QToolBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QToolButton</Title> -<Para> -<Literal>QToolButton</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QToolTip</Title> -<Para> -<Literal>QToolTip</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QToolTipGroup</Title> -<Para> -<Literal>QToolTipGroup</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QTranslator (Qt v2+)</Title> -<Para> -<Literal>QTranslator</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTranslatorMessage (Qt v2.2+)</Title> -<Para> -<Literal>QTranslatorMessage</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QUrl (Qt v2.1+)</Title> -<Para> -<Literal>QUrl</Literal> is fully implemented, including the -<Literal>QString()</Literal>, <Literal>==</Literal> and <Literal>!=</Literal> -operators. -</Para> -</Sect2> -<Sect2><Title>QUrlInfo (Qt v2.1+)</Title> -<Para> -<Literal>QUrlInfo</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QUrlOperator (Qt v2.1+)</Title> -<FuncSynopsis> - <FuncDef>virtual bool <Function>isDir</Function></FuncDef> - <ParamDef>bool *<Parameter>ok</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This returns a tuple of the <Literal>bool</Literal> result and the -<Literal>ok</Literal> value. -</Para> -</Sect2> -<Sect2><Title>QUuid (Qt v3.0+)</Title> -<Para> -<Literal>QUuid</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QValidator</Title> -<FuncSynopsis> - <FuncDef>virtual State <Function>validate</Function></FuncDef> - <ParamDef>QString& <Parameter>input</Parameter></ParamDef> - <ParamDef>int& <Parameter>pos</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The returned value is a tuple of the <Literal>State</Literal> result and the -updated <Literal>pos</Literal>. -</Para> -</Sect2> - -<Sect2><Title>QDoubleValidator</Title> -<FuncSynopsis> - <FuncDef>State <Function>validate</Function></FuncDef> - <ParamDef>QString& <Parameter>input</Parameter></ParamDef> - <ParamDef>int& <Parameter>pos</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The returned value is a tuple of the <Literal>State</Literal> result and the -updated <Literal>pos</Literal>. -</Para> -</Sect2> - -<Sect2><Title>QIntValidator</Title> -<FuncSynopsis> - <FuncDef>State <Function>validate</Function></FuncDef> - <ParamDef>QString& <Parameter>input</Parameter></ParamDef> - <ParamDef>int& <Parameter>pos</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The returned value is a tuple of the <Literal>State</Literal> result and the -updated <Literal>pos</Literal>. -</Para> -</Sect2> - -<Sect2><Title>QRegExpValidator (Qt v3+)</Title> -<FuncSynopsis> - <FuncDef>virtual State <Function>validate</Function></FuncDef> - <ParamDef>QString& <Parameter>input</Parameter></ParamDef> - <ParamDef>int& <Parameter>pos</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The returned value is a tuple of the <Literal>State</Literal> result and the -updated <Literal>pos</Literal>. -</Para> -</Sect2> -<Sect2><Title>QValueList<type> (Qt v2+)</Title> -<Para> -Types based on the <Literal>QValueList</Literal> template are automatically -converted to and from Python lists of the type. -</Para> -</Sect2> -<Sect2><Title>QVariant (Qt v2.1+)</Title> -<FuncSynopsis> - <FuncDef><Function>QVariant</Function></FuncDef> - <ParamDef>const char *<Parameter>val</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef><Function>QVariant</Function></FuncDef> - <ParamDef>const QBitArray &<Parameter>val</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef><Function>QVariant</Function></FuncDef> - <ParamDef>const QValueList<QVariant> &<Parameter>val</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef><Function>QVariant</Function></FuncDef> - <ParamDef>const QMap<QString,QVariant> &<Parameter>val</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QBitArray &<Function>asBitArray</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool &<Function>asBool</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>double &<Function>asDouble</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>int &<Function>asInt</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QValueList<QVariant> &<Function>asList</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QMap<QString,QVariant> &<Function>asMap</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>uint &<Function>asUInt</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QValueListConstIterator<QVariant><Function>listBegin</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QValueListConstIterator<QVariant><Function>listEnd</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QMapConstIterator<QString,QVariant><Function>mapBegin</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QMapConstIterator<QString,QVariant><Function>mapEnd</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QMapConstIterator<QString,QVariant><Function>mapFind</Function> const</FuncDef> - <ParamDef>const QString &<Parameter>key</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QValueListConstIterator<QString><Function>stringListBegin</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QValueListConstIterator<QString><Function>stringListEnd</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>const QBitArray <Function>toBitArray</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>const QValueList<QVariant><Function>toList</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>const QMap<QString,QVariant><Function>toMap</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> -</Sect2> -<Sect2><Title>QVBox (Qt v2+)</Title> -<Para> -<Literal>QVBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QVButtonGroup (Qt v2+)</Title> -<Para> -<Literal>QVButtonGroup</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QVGroupBox (Qt v2+)</Title> -<Para> -<Literal>QVGroupBox</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QWaitCondition (Qt v2.2+)</Title> -<Para> -<Literal>QWaitCondition</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QWhatsThis</Title> -<Para> -<Literal>QWhatsThis</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QWidget</Title> -<FuncSynopsis> - <FuncDef>QWExtra *<Function>extraData</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>QFocusData *<Function>focusData</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>lower</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed to <Literal>lowerW</Literal> in Python. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>raise</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed to <Literal>raiseW</Literal> in Python. -</Para> -</Sect2> -<Sect2><Title>QWidgetList</Title> -<Para> -This class isn't implemented. Whenever a <Literal>QWidgetList</Literal> is the -return type of a function or the type of an argument, a Python list of -instances is used instead. -</Para> -</Sect2> -<Sect2><Title>QWidgetStack</Title> -<Para> -<Literal>QWidgetStack</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QWindow</Title> -<Para> -<Literal>QWindow</Literal> is fully implemented (Qt v1.x). -</Para> -</Sect2> -<Sect2><Title>QWindowsStyle (Qt v2+)</Title> -<FuncSynopsis> - <FuncDef>void <Function>getButtonShift</Function></FuncDef> - <ParamDef>int &<Parameter>x</Parameter></ParamDef> - <ParamDef>int &<Parameter>y</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the <Literal>x</Literal> and -<Literal>y</Literal> values. (Qt v2) -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>scrollBarMetrics</Function></FuncDef> - <ParamDef>const QTabBar *<Parameter>sb</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef> - <ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef> - <ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>sb</Literal> parameter and returns a tuple of the -<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>, -<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values. -(Qt v2) -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>tabbarMetrics</Function></FuncDef> - <ParamDef>const QTabBar *<Parameter>t</Parameter></ParamDef> - <ParamDef>int &<Parameter>hframe</Parameter></ParamDef> - <ParamDef>int &<Parameter>vframe</Parameter></ParamDef> - <ParamDef>int &<Parameter>overlap</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes only the <Literal>t</Literal> parameter and returns a tuple of the -<Literal>hframe</Literal>, <Literal>vframe</Literal> and -<Literal>overlap</Literal> values. (Qt v2) -</Para> -</Sect2> -<Sect2><Title>QWindowsXPStyle (Qt v3.0.1+, Windows)</Title> -<Para> -<Literal>QWindowsXPStyle</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QWizard (Qt v2+)</Title> -<Para> -<Literal>QWizard</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QWMatrix</Title> -<Para> -The Python <Literal>==</Literal>, <Literal>!=</Literal> and -<Literal>*=</Literal> operators are supported. -</Para> - -<FuncSynopsis> - <FuncDef>QWMatrix <Function>invert</Function> const</FuncDef> - <ParamDef>bool *<Parameter>invertible</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the <Literal>QWMatrix</Literal> -result and the <Literal>invertible</Literal> value. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>map</Function> const</FuncDef> - <ParamDef>int <Parameter>x</Parameter></ParamDef> - <ParamDef>int <Parameter>y</Parameter></ParamDef> - <ParamDef>int *<Parameter>tx</Parameter></ParamDef> - <ParamDef>int *<Parameter>ty</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>x</Literal> and <Literal>y</Literal> parameters and -returns a tuple containing the <Literal>tx</Literal> and <Literal>ty</Literal> -values. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>map</Function> const</FuncDef> - <ParamDef>float <Parameter>x</Parameter></ParamDef> - <ParamDef>float <Parameter>y</Parameter></ParamDef> - <ParamDef>float *<Parameter>tx</Parameter></ParamDef> - <ParamDef>float *<Parameter>ty</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>x</Literal> and <Literal>y</Literal> parameters and -returns a tuple containing the <Literal>tx</Literal> and <Literal>ty</Literal> -values. (Qt v1.x) -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>map</Function> const</FuncDef> - <ParamDef>double <Parameter>x</Parameter></ParamDef> - <ParamDef>double <Parameter>y</Parameter></ParamDef> - <ParamDef>double *<Parameter>tx</Parameter></ParamDef> - <ParamDef>double *<Parameter>ty</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>x</Literal> and <Literal>y</Literal> parameters and -returns a tuple containing the <Literal>tx</Literal> and <Literal>ty</Literal> -values. (Qt v2+) -</Para> -</Sect2> -<Sect2><Title>QWorkspace (Qt v2.1+)</Title> -<Para> -<Literal>QWorkspace</Literal> is fully implemented. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qtaxcontainer</Literal> Module Reference</Title> -<Sect2><Title>QAxBase (Windows, Qt v3+)</Title> -<FuncSynopsis> - <FuncDef><Function>QAxObject</Function></FuncDef> - <ParamDef>IUnknown *<Parameter>iface</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>long <Function>queryInterface</Function></FuncDef> - <ParamDef>const QUuid &<Parameter>uuid</Parameter></ParamDef> - <ParamDef>void **<Parameter>iface</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>PropertyBag <Function>propertyBag</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>setPropertyBag</Function></FuncDef> - <ParamDef>const PropertyBag &<Parameter>bag</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> - -<FuncSynopsis> - <FuncDef>unsigned long <Function>registerWeakActiveObject</Function></FuncDef> - <ParamDef>const QString &<Parameter>guid</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This is a utility method provided by PyQt to make it easier to use -Mark Hammond's <Literal>win32com</Literal> module to manipulate objects -created by the <Literal>qtaxcontainer</Literal> module. -</Para> -<Para> -The <Literal>RegisterActiveObject()</Literal> COM function is called to -register the <Literal>QAxBase</Literal> instance as a weak object with the -<Literal>guid</Literal> GUID. The revoke handle is returned. -</Para> - -<FuncSynopsis> - <FuncDef>static void <Function>revokeActiveObject</Function></FuncDef> - <ParamDef>unsigned long <Parameter>rhandle</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This is a wrapper around the <Literal>RevokeActiveObject()</Literal> COM -function and is called to revoke the object registered using -<Literal>registerWeakActiveObject()</Literal>. <Literal>rhandle</Literal> is -the revoke handle returned by <Literal>registerWeakActiveObject()</Literal>. -</Para> -</Sect2> -<Sect2><Title>QAxObject (Windows, Qt v3+)</Title> -<FuncSynopsis> - <FuncDef><Function>QAxObject</Function></FuncDef> - <ParamDef>IUnknown *<Parameter>iface</Parameter></ParamDef> - <ParamDef>QObject *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -<Sect2><Title>QAxWidget (Windows, Qt v3+)</Title> -<FuncSynopsis> - <FuncDef><Function>QAxWidget</Function></FuncDef> - <ParamDef>IUnknown *<Parameter>iface</Parameter></ParamDef> - <ParamDef>QWidget *<Parameter>parent</Parameter> = 0</ParamDef> - <ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qtcanvas</Literal> Module Reference</Title> -<Sect2><Title>QCanvas (Qt v2.2+)</Title> -<Para> -<Literal>QCanvas</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasEllipse (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasEllipse</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasItem (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasItemList (Qt v2.2+)</Title> -<Para> -This class isn't implemented. Whenever a <Literal>QCanvasItemList</Literal> is -the return type of a function or the type of an argument, a Python list of -<Literal>QCanvasItem</Literal> instances is used instead. -</Para> -</Sect2> - -<Sect2><Title>QCanvasLine (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasLine</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasPixmap (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasPixmap</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasPixmapArray (Qt v2.2+)</Title> -<FuncSynopsis> - <FuncDef><Function>QPixmapArray</Function></FuncDef> - <ParamDef>QList<QPixmap> <Parameter>pixmaps</Parameter></ParamDef> - <ParamDef>QList<QPoint> <Parameter>hotspots</Parameter></ParamDef> -</FuncSynopsis> -<Para> -The <Literal>pixmaps</Literal> argument is a Python list of QPixmap instances, -and the <Literal>hotspots</Literal> argument is a Python list of QPoint -instances. (Qt v2.2.0 - Qt v2.3.1) -</Para> - -<FuncSynopsis> - <FuncDef><Function>QPixmapArray</Function></FuncDef> - <ParamDef>QValueList<QPixmap> <Parameter>pixmaps</Parameter></ParamDef> - <ParamDef>QPointArray <Parameter>hotspots</Parameter> = QPointArray()</ParamDef> -</FuncSynopsis> -<Para> -The <Literal>pixmaps</Literal> argument is a Python list of QPixmap instances. -(Qt v3+) -</Para> -</Sect2> - -<Sect2><Title>QCanvasPolygon (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasPolygon</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasPolygonalItem (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasPolygonalItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasRectangle (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasRectangle</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasSpline (Qt v3.0+)</Title> -<Para> -<Literal>QCanvasSpline</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasSprite (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasSprite</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasText (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasText</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCanvasView (Qt v2.2+)</Title> -<Para> -<Literal>QCanvasView</Literal> is fully implemented. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qtext</Literal> Module Reference</Title> - -<Sect2><Title>QextScintilla</Title> -<FuncSynopsis> - <FuncDef>void <Function>getCursorPosition</Function></FuncDef> - <ParamDef>int *<Parameter>line</Parameter></ParamDef> - <ParamDef>int *<Parameter>index</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the values returned by the -<Literal>line</Literal> and <Literal>index</Literal> pointers. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>getSelection</Function></FuncDef> - <ParamDef>int *<Parameter>lineFrom</Parameter></ParamDef> - <ParamDef>int *<Parameter>indexFrom</Parameter></ParamDef> - <ParamDef>int *<Parameter>lineTo</Parameter></ParamDef> - <ParamDef>int *<Parameter>indexTo</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes no parameters and returns a tuple of the values returned by the -<Literal>lineFrom</Literal>, <Literal>indexFrom</Literal>, -<Literal>lineTo</Literal> and <Literal>indexTo</Literal> pointers. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaAPIs</Title> -<Para> -<Literal>QextScintillaAPIs</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaBase</Title> -<Para> -<Literal>QextScintillaBase</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaCommand</Title> -<Para> -<Literal>QextScintillaCommand</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaCommandSet</Title> -<Para> -<Literal>QextScintillaCommandSet</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaDocument</Title> -<Para> -<Literal>QextScintillaDocument</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexer</Title> -<Para> -<Literal>QextScintillaLexer</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerBash (QScintilla v1.4+)</Title> -<Para> -<Literal>QextScintillaLexerBash</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerBatch (QScintilla v1.6+)</Title> -<Para> -<Literal>QextScintillaLexerBatch</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerCPP</Title> -<Para> -<Literal>QextScintillaLexerCPP</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerCSharp</Title> -<Para> -<Literal>QextScintillaLexerCSharp</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerCSS (QScintilla v1.6+)</Title> -<Para> -<Literal>QextScintillaLexerCSS</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerDiff (QScintilla v1.6+)</Title> -<Para> -<Literal>QextScintillaLexerDiff</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerHTML (QScintilla v1.1+)</Title> -<Para> -<Literal>QextScintillaLexerHTML</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerIDL</Title> -<Para> -<Literal>QextScintillaLexerIDL</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerJava</Title> -<Para> -<Literal>QextScintillaLexerJava</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerJavaScript</Title> -<Para> -<Literal>QextScintillaLexerJavaScript</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerLua (QScintilla v1.5+)</Title> -<Para> -<Literal>QextScintillaLexerLua</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerMakefile (QScintilla v1.6+)</Title> -<Para> -<Literal>QextScintillaLexerMakefile</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerPerl</Title> -<Para> -<Literal>QextScintillaLexerPerl</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerPOV (QScintilla v1.6+)</Title> -<Para> -<Literal>QextScintillaLexerPOV</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerProperties (QScintilla v1.6+)</Title> -<Para> -<Literal>QextScintillaLexerProperties</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerPython</Title> -<Para> -<Literal>QextScintillaLexerPython</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerRuby (QScintilla v1.5+)</Title> -<Para> -<Literal>QextScintillaLexerRuby</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerSQL (QScintilla v1.1+)</Title> -<Para> -<Literal>QextScintillaLexerSQL</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaLexerTeX (QScintilla v1.6+)</Title> -<Para> -<Literal>QextScintillaLexerTeX</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaMacro</Title> -<Para> -<Literal>QextScintillaMacro</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QextScintillaPrinter</Title> -<Para> -<Literal>QextScintillaPrinter</Literal> is fully implemented. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qtgl</Literal> Module Reference</Title> -<Sect2><Title>QGL</Title> -<Para> -<Literal>QGL</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QGLContext</Title> -<Para> -<Literal>QGLContext</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QGLFormat</Title> -<Para> -<Literal>QGLFormat</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QGLWidget</Title> -<Para> -<Literal>QGLWidget</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QGLColormap (Qt v3.0+)</Title> -<FuncSynopsis> - <FuncDef>void <Function>setEntries</Function></FuncDef> - <ParamDef>int <Parameter>count</Parameter></ParamDef> - <ParamDef>const QRgb *<Parameter>colors</Parameter></ParamDef> - <ParamDef>int <Parameter>base</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qtnetwork</Literal> Module Reference</Title> -<Sect2><Title>QDns (Qt v2.2+)</Title> -<Para> -<Literal>QDns</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QFtp (Qt v2.2+)</Title> -<FuncSynopsis> - <FuncDef>Q_LONG <Function>readBlock</Function></FuncDef> - <ParamDef>char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>maxlen</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single <Literal>maxlen</Literal> parameter. The -<Literal>data</Literal> is returned if there was no error, otherwise -<Literal>None</Literal> is returned. -</Para> -</Sect2> -<Sect2><Title>QHostAddress (Qt v2.2+)</Title> -<FuncSynopsis> - <FuncDef><Function>QHostAddress</Function></FuncDef> - <ParamDef>Q_UINT8 *<Parameter>ip6Addr</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef><Function>QHostAddress</Function></FuncDef> - <ParamDef>const Q_IPV6ADDR &<Parameter>ip6Addr</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>void <Function>setAddress</Function></FuncDef> - <ParamDef>Q_UINT8 *<Parameter>ip6Addr</Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> - -<FuncSynopsis> - <FuncDef>Q_IPV6ADDR <Function>toIPv6Address</Function> const</FuncDef> - <ParamDef><Parameter></Parameter></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. -</Para> -</Sect2> -<Sect2><Title>QHttp (Qt v3+)</Title> -<FuncSynopsis> - <FuncDef>Q_LONG <Function>readBlock</Function></FuncDef> - <ParamDef>char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>maxlen</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single <Literal>maxlen</Literal> parameter. The -<Literal>data</Literal> is returned if there was no error, otherwise -<Literal>None</Literal> is returned. -</Para> -</Sect2> - -<Sect2><Title>QHttpHeader (Qt v3.1+)</Title> -<Para> -<Literal>QHttpHeader</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QHttpRequestHeader (Qt v3.1+)</Title> -<Para> -<Literal>QHttpRequestHeader</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QHttpResponseHeader (Qt v3.1+)</Title> -<Para> -<Literal>QHttpResponseHeader</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QLocalFs (Qt v2.1+)</Title> -<Para> -<Literal>QLocalFs</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QServerSocket (Qt v2.2+)</Title> -<Para> -<Literal>QServerSocket</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSocket (Qt v2.2+)</Title> -<FuncSynopsis> - <FuncDef>Q_LONG <Function>readBlock</Function></FuncDef> - <ParamDef>char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single <Literal>len</Literal> parameter. The -<Literal>data</Literal> is returned if there was no error, otherwise -<Literal>Py_None</Literal> is returned. -</Para> - -<FuncSynopsis> - <FuncDef>Q_LONG <Function>readLine</Function></FuncDef> - <ParamDef>char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>maxlen</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single <Literal>maxlen</Literal> parameter. The -<Literal>data</Literal> is returned if there was no error, otherwise -<Literal>Py_None</Literal> is returned. -</Para> - -<FuncSynopsis> - <FuncDef>Q_LONG <Function>writeBlock</Function></FuncDef> - <ParamDef>const char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -<Literal>len</Literal> is derived from <Literal>data</Literal> and not passed -as a parameter. -</Para> -</Sect2> -<Sect2><Title>QSocketDevice (Qt v2.2+)</Title> -<FuncSynopsis> - <FuncDef>Q_LONG <Function>readBlock</Function></FuncDef> - <ParamDef>char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes a single <Literal>len</Literal> parameter. The -<Literal>data</Literal> is returned if there was no error, otherwise -<Literal>None</Literal> is returned. -</Para> - -<FuncSynopsis> - <FuncDef>Q_LONG <Function>writeBlock</Function></FuncDef> - <ParamDef>const char *<Parameter>data</Parameter></ParamDef> - <ParamDef>Q_ULONG <Parameter>len</Parameter></ParamDef> -</FuncSynopsis> -<Para> -<Literal>len</Literal> is derived from <Literal>data</Literal> and not passed -as a parameter. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qtpe</Literal> Module Reference</Title> - -<Sect2><Title>QPEApplication</Title> -<FuncSynopsis> - <FuncDef><Function>QApplication</Function></FuncDef> - <ParamDef>int& <Parameter>argc</Parameter></ParamDef> - <ParamDef>char **<Parameter>argv</Parameter></ParamDef> - <ParamDef>Type <Parameter>type</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This takes two parameters, the first of which is a list of argument strings. -Arguments used by Qt are removed from the list. -</Para> - -<FuncSynopsis> - <FuncDef>int <Function>exec</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed to <Literal>exec_loop</Literal> in Python. -</Para> -</Sect2> - -<Sect2><Title>AppLnk</Title> -<FuncSynopsis> - <FuncDef>virtual QString <Function>exec</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed to <Literal>exec_property</Literal> in Python. -</Para> -</Sect2> - -<Sect2><Title>AppLnkSet</Title> -<Para> -<Literal>AppLnkSet</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>Config</Title> -<Para> -<Literal>Config</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>DateFormat</Title> -<Para> -<Literal>DateFormat</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>DocLnk</Title> -<FuncSynopsis> - <FuncDef>QString <Function>exec</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed to <Literal>exec_property</Literal> in Python. -</Para> -</Sect2> - -<Sect2><Title>DocLnkSet</Title> -<Para> -<Literal>DocLnkSet</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>FileManager</Title> -<Para> -<Literal>FileManager</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>FileSelector</Title> -<Para> -<Literal>FileSelector</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>FileSelectorItem</Title> -<Para> -<Literal>FileSelectorItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>FontDatabase</Title> -<Para> -<Literal>FontDatabase</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>Global</Title> -<FuncSynopsis> - <FuncDef>static void <Function>setBuiltinCommands</Function></FuncDef> - <ParamDef>Command *</ParamDef> -</FuncSynopsis> -<Para> -Not implemented. -</Para> -</Sect2> - -<Sect2><Title>MenuButton</Title> -<Para> -<Literal>MenuButton</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCopEnvelope</Title> -<Para> -<Literal>QCopEnvelope</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDawg</Title> -<Para> -<Literal>QDawg</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QPEMenuBar</Title> -<Para> -<Literal>QPEMenuBar</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QPEToolBar</Title> -<Para> -<Literal>QPEToolBar</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>Resource</Title> -<Para> -<Literal>Resource</Literal> is fully implemented. -</Para> -</Sect2> - -</Sect1> -<Sect1><Title><Literal>qtsql</Literal> Module Reference</Title> -<Sect2><Title>QDataBrowser (Qt v3+)</Title> -<FuncSynopsis> - <FuncDef>virtual void <Function>del</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>delOnCursor</Literal> in Python. -</Para> -</Sect2> -<Sect2><Title>QDataTable (Qt v3+)</Title> -<Para> -<Literal>QDataTable</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QDataView (Qt v3+)</Title> -<Para> -<Literal>QDataView</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QEditorFactory (Qt v3+)</Title> -<Para> -<Literal>QEditorFactory</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSql (Qt v3+)</Title> -<Para> -<Literal>QSql</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSqlCursor (Qt v3+)</Title> -<FuncSynopsis> - <FuncDef>virtual int <Function>del</Function></FuncDef> - <ParamDef>bool <Parameter>invalidate</Parameter> = TRUE</ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>delRecords</Literal> in Python. -</Para> - -<FuncSynopsis> - <FuncDef>virtual int <Function>del</Function></FuncDef> - <ParamDef>const QString &<Parameter>filter</Parameter></ParamDef> - <ParamDef>bool <Parameter>invalidate</Parameter> = TRUE</ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>delRecords</Literal> in Python. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>exec</Function></FuncDef> - <ParamDef>const QString &<Parameter>query</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>execQuery</Literal> in Python. -</Para> -</Sect2> -<Sect2><Title>QSqlDatabase (Qt v3+)</Title> -<FuncSynopsis> - <FuncDef>QSqlQuery <Function>exec</Function></FuncDef> - <ParamDef>const QString &<Parameter>query</Parameter> = QString::null</ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>execStatement</Literal> in Python. -</Para> -</Sect2> -<Sect2><Title>QSqlDriver (Qt v3+)</Title> -<Para> -<Literal>QSqlDriver</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSqlEditorFactory (Qt v3+)</Title> -<Para> -<Literal>QSqlEditorFactory</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSqlError (Qt v3+)</Title> -<Para> -<Literal>QSqlError</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSqlField (Qt v3+)</Title> -<Para> -<Literal>QSqlField</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QSqlFieldInfo (Qt v3+)</Title> -<Para> -<Literal>QSqlFieldInfo</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSqlForm (Qt v3+)</Title> -<Para> -<Literal>QSqlForm</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSqlIndex (Qt v3+)</Title> -<Para> -<Literal>QSqlIndex</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSqlPropertyMap (Qt v3+)</Title> -<Para> -<Literal>QSqlPropertyMap</Literal> is fully implemented. However, because PyQt -does not allow new properties to be defined, it is not possible to implement -custom editor widgets in Python and add them to a property map. These will -simply be ignored. -</Para> - -<Para> -This problem may be addressed in a future release of PyQt. -</Para> -</Sect2> -<Sect2><Title>QSqlQuery (Qt v3+)</Title> -<FuncSynopsis> - <FuncDef>QMap<QString,QVariant> <Function>boundValues</Function> const</FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v3.2.0+) -</Para> - -<FuncSynopsis> - <FuncDef>virtual bool <Function>exec</Function></FuncDef> - <ParamDef>const QString &<Parameter>query</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>execQuery</Literal> in Python. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>exec</Function></FuncDef> - <ParamDef></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>execQuery</Literal> in Python. (Qt v3.1+) -</Para> -</Sect2> -<Sect2><Title>QSqlRecord (Qt v3+)</Title> -<Para> -<Literal>QSqlRecord</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QSqlRecordInfo (Qt v3+)</Title> -<Para> -<Literal>QSqlRecordInfo</Literal> is implemented as a Python list of -<Literal>QSqlFieldInfo</Literal> instances. -</Para> -</Sect2> -<Sect2><Title>QSqlResult (Qt v3+)</Title> -<Para> -<Literal>QSqlResult</Literal> is fully implemented. -</Para> -</Sect2> -<Sect2><Title>QSqlSelectCursor (Qt v3.2.0+)</Title> -<FuncSynopsis> - <FuncDef>int <Function>del</Function></FuncDef> - <ParamDef>bool <Parameter>invalidate</Parameter> = TRUE</ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>delRecords</Literal> in Python. -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>exec</Function></FuncDef> - <ParamDef>const QString &<Parameter>query</Parameter></ParamDef> -</FuncSynopsis> -<Para> -This has been renamed <Literal>execQuery</Literal> in Python. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qttable</Literal> Module Reference</Title> -<Sect2><Title>QTable (Qt v2.2+)</Title> -<Para> -<Literal>QTable</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTableItem (Qt v2.2+)</Title> -<Para> -<Literal>QTableItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QCheckTableItem (Qt v3+)</Title> -<Para> -<Literal>QCheckTableItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QComboTableItem (Qt v3+)</Title> -<Para> -<Literal>QComboTableItem</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QTableSelection (Qt v2.2+)</Title> -<Para> -<Literal>QTableSelection</Literal> is fully implemented. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qtui</Literal> Module Reference</Title> -<Sect2><Title>QWidgetFactory (Qt v3+)</Title> -<Para> -<Literal>QWidgetFactory</Literal> is fully implemented. -</Para> -</Sect2> -</Sect1> -<Sect1><Title><Literal>qtxml</Literal> Module Reference</Title> -<Sect2><Title>QDomImplementation (Qt v2.2+)</Title> -<Para> -<Literal>QDomImplementation</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomNode (Qt v2.2+)</Title> -<Para> -<Literal>QDomNode</Literal> is fully implemented, including the Python -<Literal>==</Literal> and <Literal>!=</Literal> operators. -</Para> -</Sect2> - -<Sect2><Title>QDomNodeList (Qt v2.2+)</Title> -<Para> -<Literal>QDomNodeList</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomDocument (Qt v2.2+)</Title> -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>const QCString &<Parameter>buffer</Parameter></ParamDef> - <ParamDef>bool <Parameter>namespaceProcessing</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>buffer</Literal> and -<Literal>namespaceProcessing</Literal> parameters and returns a tuple -containing the <Literal>bool</Literal> result and the -<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and -<Literal>errorColumn</Literal> values. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>const QByteArray &<Parameter>buffer</Parameter></ParamDef> - <ParamDef>bool <Parameter>namespaceProcessing</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>buffer</Literal> and -<Literal>namespaceProcessing</Literal> parameters and returns a tuple -containing the <Literal>bool</Literal> result and the -<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and -<Literal>errorColumn</Literal> values. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>const QString &<Parameter>text</Parameter></ParamDef> - <ParamDef>bool <Parameter>namespaceProcessing</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>text</Literal> and -<Literal>namespaceProcessing</Literal> parameters and returns a tuple -containing the <Literal>bool</Literal> result and the -<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and -<Literal>errorColumn</Literal> values. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>const QIODevice *<Parameter>dev</Parameter></ParamDef> - <ParamDef>bool <Parameter>namespaceProcessing</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>dev</Literal> and -<Literal>namespaceProcessing</Literal> parameters and returns a tuple -containing the <Literal>bool</Literal> result and the -<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and -<Literal>errorColumn</Literal> values. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>const QCString &<Parameter>buffer</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>buffer</Literal> parameter only and returns a tuple -containing the <Literal>bool</Literal> result and the -<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and -<Literal>errorColumn</Literal> values. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>const QByteArray &<Parameter>buffer</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>buffer</Literal> parameter only and returns a tuple -containing the <Literal>bool</Literal> result and the -<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and -<Literal>errorColumn</Literal> values. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>const QString &<Parameter>text</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>text</Literal> parameter only and returns a tuple -containing the <Literal>bool</Literal> result and the -<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and -<Literal>errorColumn</Literal> values. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>const QIODevice *<Parameter>dev</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -This takes the <Literal>dev</Literal> parameter only and returns a tuple -containing the <Literal>bool</Literal> result and the -<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and -<Literal>errorColumn</Literal> values. (Qt v3+) -</Para> - -<FuncSynopsis> - <FuncDef>bool <Function>setContent</Function></FuncDef> - <ParamDef>QXmlInputSource *<Parameter>source</Parameter></ParamDef> - <ParamDef>QXmlReader *<Parameter>reader</Parameter></ParamDef> - <ParamDef>QString *<Parameter>errorMsg</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef> - <ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef> -</FuncSynopsis> -<Para> -Not yet implemented. (Qt v3.2.0+) -</Para> -</Sect2> - -<Sect2><Title>QDomDocumentFragment (Qt v2.2+)</Title> -<Para> -<Literal>QDomDocumentFragment</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomDocumentType (Qt v2.2+)</Title> -<Para> -<Literal>QDomDocumentType</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomNamedNodeMap (Qt v2.2+)</Title> -<Para> -<Literal>QDomNamedNodeMap</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomCharacterData (Qt v2.2+)</Title> -<Para> -<Literal>QDomCharacterData</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomAttr (Qt v2.2+)</Title> -<Para> -<Literal>QDomAttr</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomElement (Qt v2.2+)</Title> -<Para> -<Literal>QDomElement</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomText (Qt v2.2+)</Title> -<Para> -<Literal>QDomText</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomComment (Qt v2.2+)</Title> -<Para> -<Literal>QDomComment</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomCDATASection (Qt v2.2+)</Title> -<Para> -<Literal>QDomCDATASection</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomNotation (Qt v2.2+)</Title> -<Para> -<Literal>QDomNotation</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomEntity (Qt v2.2+)</Title> -<Para> -<Literal>QDomEntity</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomEntityReference (Qt v2.2+)</Title> -<Para> -<Literal>QDomEntityReference</Literal> is fully implemented. -</Para> -</Sect2> - -<Sect2><Title>QDomProcessingInstruction (Qt v2.2+)</Title> -<Para> -<Literal>QDomProcessingInstruction</Literal> is fully implemented. -</Para> -</Sect2> -</Sect1> -</Article> |