12 files changed, 830 insertions, 0 deletions
diff --git a/doc/man/indi/CMakeLists.txt b/doc/man/indi/CMakeLists.txt
new file mode 100644
index 00000000..451eb394
--- /dev/null
+++ b/doc/man/indi/CMakeLists.txt
@@ -0,0 +1,17 @@
+INSTALL(
+    FILES
+        celestrongps.1 
+        indiserver.1
+        lx200classic.1
+        temma.1
+        lx200_16.1
+        lx200generic.1
+        v4ldriver.1
+        fliccd.1
+        lx200autostar.1
+        lx200gps.1
+        v4lphilips.1
+
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/indi/celestrongps.1 b/doc/man/indi/celestrongps.1
new file mode 100644
index 00000000..45adf8fd
--- /dev/null
+++ b/doc/man/indi/celestrongps.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CELESTRONGPS 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+celestrongps \- Celestron GPS driver for INDI telescope control
+.SH SYNOPSIS
+.B celestrongps
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBcelestrongps\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/fliccd.1 b/doc/man/indi/fliccd.1
new file mode 100644
index 00000000..3a0a73c0
--- /dev/null
+++ b/doc/man/indi/fliccd.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH FLICCD 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+fliccd \- Finger Lakes Instruments CCD driver for INDI telescope control
+.SH SYNOPSIS
+.B v4ldriver
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBfliccd\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/indiserver.1 b/doc/man/indi/indiserver.1
new file mode 100644
index 00000000..d11ee6dc
--- /dev/null
+++ b/doc/man/indi/indiserver.1
@@ -0,0 +1,123 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH INDISERVER 1 "October 16, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+indiserver \- INDI server for telescope control under KStars
+.SH SYNOPSIS
+.B indiserver
+[ \fB\-p\fP \fIport\fP ]
+[ \fB\-r\fP \fIattempts\fP ]
+[ \fB\-vv\fP ]
+\fIdriver\fP [ \fIdriver\fP ... ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBindiserver\fP is a server that sits between the
+KStars user interface and the low-level hardware drivers.
+.PP
+The INDI server is a network server, in that either local or remote clients
+may connect to it to control astronomical instruments.  The INDI server must
+be running on the machine that is physically connected to the
+astronomical instruments.
+.PP
+Note that there is no need for you to run the INDI server directly.  Using
+the KStars device manager, you can set up astronomical instruments and start
+or stop the INDI server all from within KStars.
+.PP
+You may however choose to run the INDI server manually from the command
+line.  In this case you must pass the names of one or more drivers for
+individual astronomical instruments.  The current list of available
+drivers is:
+.PP
+.RS
+celestrongps (Celestron GPS)
+.br
+fliccd (Finger Lakes Instruments CCD)
+.br
+lx200_16 (LX200 16")
+.br
+lx200autostar (LX200 Autostar)
+.br
+lx200classic (LX200 Classic)
+.br
+lx200generic (LX200 Generic)
+.br
+lx200gps (LX200 GPS)
+.br
+temma (Temma Takahashi)
+.br
+v4ldriver (Video4Linux Generic)
+.br
+v4lphilips (Philips Webcam)
+.RE
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-p\fP \fIport\fP
+Specify the port to listen on (defaults to 7624).
+.TP
+\fB\-r\fP \fIattempts\fP
+Specify the maximum number of restart attempts for each driver (defaults to 2).
+.TP
+\fB\-vv\fP
+Write more verbose output to stderr.
+.SH EXAMPLE
+To start an INDI server running an LX200 GPS driver and listening to
+connections on port 8000:
+.PP
+.RS
+\fIprompt$\fP indiserver -p 8000 lx200gps
+.RE
+.SH SEE ALSO
+.BR celestrongps (1),
+.BR fliccd (1),
+.BR lx200_16 (1),
+.BR lx200autostar (1),
+.BR lx200classic (1),
+.BR lx200generic (1),
+.BR lx200gps (1),
+.BR kstars (1),
+.BR temma (1),
+.BR v4ldriver (1),
+.BR v4lphilips (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/lx200_16.1 b/doc/man/indi/lx200_16.1
new file mode 100644
index 00000000..d169ebf1
--- /dev/null
+++ b/doc/man/indi/lx200_16.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH LX200_16 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+lx200_16 \- LX200 16" driver for INDI telescope control
+.SH SYNOPSIS
+.B lx200_16
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBlx200_16\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/lx200autostar.1 b/doc/man/indi/lx200autostar.1
new file mode 100644
index 00000000..b13bbffe
--- /dev/null
+++ b/doc/man/indi/lx200autostar.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH LX200AUTOSTAR 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+lx200autostar \- LX200 Autostar driver for INDI telescope control
+.SH SYNOPSIS
+.B lx200autostar
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBlx200autostar\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/lx200classic.1 b/doc/man/indi/lx200classic.1
new file mode 100644
index 00000000..a37527a8
--- /dev/null
+++ b/doc/man/indi/lx200classic.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH LX200CLASSIC 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+lx200classic \- LX200 Classic driver for INDI telescope control
+.SH SYNOPSIS
+.B lx200classic
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBlx200classic\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/lx200generic.1 b/doc/man/indi/lx200generic.1
new file mode 100644
index 00000000..b37ccfee
--- /dev/null
+++ b/doc/man/indi/lx200generic.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH LX200GENERIC 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+lx200generic \- LX200 Generic driver for INDI telescope control
+.SH SYNOPSIS
+.B lx200generic
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBlx200generic\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/lx200gps.1 b/doc/man/indi/lx200gps.1
new file mode 100644
index 00000000..ea0d2fc8
--- /dev/null
+++ b/doc/man/indi/lx200gps.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH LX200GPS 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+lx200gps \- LX200 GPS driver for INDI telescope control
+.SH SYNOPSIS
+.B lx200gps
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBlx200gps\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/temma.1 b/doc/man/indi/temma.1
new file mode 100644
index 00000000..46b9e4ea
--- /dev/null
+++ b/doc/man/indi/temma.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH TEMMA 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+temma \- Temma Takahashi driver for INDI telescope control
+.SH SYNOPSIS
+.B temma
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBtemma\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/v4ldriver.1 b/doc/man/indi/v4ldriver.1
new file mode 100644
index 00000000..9220a16b
--- /dev/null
+++ b/doc/man/indi/v4ldriver.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH V4LDRIVER 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+v4ldriver \- Video4Linux Generic driver for INDI telescope control
+.SH SYNOPSIS
+.B v4ldriver
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBv4ldriver\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/indi/v4lphilips.1 b/doc/man/indi/v4lphilips.1
new file mode 100644
index 00000000..1553652d
--- /dev/null
+++ b/doc/man/indi/v4lphilips.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH V4LPHILIPS 1 "March 16, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+v4lphilips \- Philips Webcam driver for INDI telescope control
+.SH SYNOPSIS
+.B v4lphilips
+[ \fB\-v\fP ]
+.SH DESCRIPTION
+KStars allows you to configure
+and control astronomical instruments such as telescopes and focusers via
+the INDI protocol.  \fBv4lphilips\fP is a device driver for supporting
+particular types of external hardware.
+.PP
+You should normally not need to run this driver directly.  Instead you
+should use KStars to configure and operate your astronomical instruments.
+Most operations can be found under the Devices menu within KStars.
+.PP
+KStars will start the INDI server internally, and the INDI server will
+in turn start this device driver.
+.PP
+Much more detailed information can be found in the KStars Handbook, as
+described below.
+.PP
+KStars is a graphical desktop planetarium for TDE, and forms part of
+the official TDE edutainment module.
+.SH OPTIONS
+.TP
+\fB\-v\fP
+Write more verbose output to stderr.
+.SH SEE ALSO
+.BR indiserver (1),
+.BR kstars (1).
+.PP
+The KStars Handbook contains detailed information on how to use INDI for
+telescope control.  You can read this handbook in the TDE Help Centre.
+Alternatively you can enter the URL
+\fIhelp:/kstars/indi.html\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kstars/indi.html\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdeedu-doc-html\fP and read this documentation in HTML format from
+\fI/opt/trinity/share/doc/tde/HTML/en/kstars/indi.html\fP.
+.SH AUTHOR
+KStars was written by Jason Harris <jharris@30doradus.org>,
+Heiko Evermann <heiko@evermann.de>, Thomas Kabelmann <tk78@gmx.de>,
+Pablo de Vicente <pvicentea@wanadoo.es>, Jasem Mutlaq <mutlaqja@ikarustech.com>,
+Carsten Niehaus <cniehaus@gmx.de>, Mark Hollomon <mhh@mindspring.com>,
+Vincent Jagot <vincent.jagot@free.fr> and
+Martin Piskernig <martin.piskernig@stuwo.at>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).