KSeg"> Cabri"> Dr.Geo"> ] > Dominique Devriese

devriese@kde.org

200220032004 Dominique Devriese &FDLNotice; 2005-08-20 0.10.5 &kig; is a &kde; application for Interactive Geometry. KDE KDE-Edu Kig Interactive Geometry KGeo Cabri Dr.Geo KSeg &kig; is an application for Interactive Geometry. It's intended to serve two purposes: Allow students to interactively explore mathematical figures and concepts using the computer. Serve as a WYSIWYG tool for drawing mathematical figures and including them in other documents. You can report problems in &kig; using the internal bug reporting tool (HelpReport Bug...), or just contact me at toscano.pino@tiscali.it. Since &kig; supports macros and the construction of locuses, it allows for some rather advanced macros to be defined. If you have created an interesting macro, which you think might be useful for other people, please mail it to me at toscano.pino@tiscali.it, so I can include it in the distribution (if you do this, it will be licensed under the terms of &kig;'s license, the GPL, so that other people can freely use and adapt it).

You can construct points in several ways: Select Objects Points Point from the menubar or press the appropriate button in the toolbar. You can then construct a point by clicking at the desired position in the window. Actually, this works the same way for constructing other objects as well: click on the desired menubar entry or toolbar button and select the necessary items to construct the object. Since you often need to construct points, simply clicking somewhere in the screen with the &MMB; will construct a point for you, without going to a menu or button. You can construct points while you are building other objects in the background, optionally selecting them for the object you are building. For more on this, see . A point has been constructed A point has been constructed

Constructing objects other than points is usually done by selecting the appropriate entry in the Objects menu, or by clicking on one of the toolbar buttons. Constructing a circle Constructing a circle This will start the construction of the chosen object type. All of these types require arguments. For example, if you selected to construct a circle by center and point, you will need to give two points: one for the center, and one for the point on the circle. These arguments are objects too, which can also be selected, simply by clicking on them. When you move the cursor over an argument you want to use to construct an object, a preliminary image will be shown of the object, so you will know what it will look like. For objects that require points as arguments, you can place a new point at the current cursor position and select it by clicking the &LMB;. You can always cancel the construction of the new object by pressing the &Esc; button or by clicking on the Stop button (red octagon with an X) on the toolbar. Constructing a circle. Constructing a circle

Selecting objects can be done in two ways: Simply clicking on an object causes that object to be selected, clearing the current selection. If you want to select multiple objects simultaneously, hold down the &Ctrl; key while clicking on an object. By clicking and dragging on an empty spot on the screen, you can select all objects within the rectangle that is created. This action will clear the current selection. As in the previous case, holding down the &Ctrl; key allows you to keep the current selection. When you have more than one object under the mouse, you can easily choose which object select or add to the current selection. Click with the &LMB;, while holding the &Shift; key, to have a popup with all the objects under the mouse. Then, you can select the object you need. As said before, the behaviour of the &Ctrl; key will affect the selection. Selecting objects Selecting objects

To move objects, you must first select them. When the objects you want to move are selected, you can start moving them by &LMB; clicking and dragging any one of them. When you are done, simply release the &LMB;. For some types of objects (especially when defined by complicated locuses), moving them can be slow on old hardware. This is unfortunate, but inevitable, given the calculations involved. If you &RMB; click one of the selected objects, and choose Move, moving the mouse will move the object. When the object is moved to the desired position, another &LMB; click will stop the moving of the object.

Deleting objects is done by first selecting them, and next doing either of these: Press the Delete key. Press the delete button on the toolbar. Right-click on one of the objects, and select Delete in the context menu that appears.

In &kig;, objects can be hidden. This is done by selecting the objects, &RMB; clicking one of them, and selecting Hide in the context menu that appears. To unhide the objects, use the EditUnhide all. This will unhide all currently hidden objects.

Night Vision is a particular way of working with hidden objects. When you have to move or change something in one or more object but without unhiding all the hidden objects you have, then the night vision mode will be of benefit to you. Basically, it allows you to see the hidden objects as if they were visible, so that you can manipulate them as you would normally. In Night Vision mode, the hidden objects will be visible with a grey colour. To toggle the night vision mode, use SettingsWear Infrared Glasses.

In &kig;, you can undo almost any change you make in the document. Just use the undo/redo buttons on the toolbar, or the appropriate shortcuts.

&kig; also has a Full Screen mode. To use it, click the appropriate button on the toolbar, or select SettingsFull Screen Mode. To leave Full Screen mode, &RMB; click the screen at a place where there is no object present, and select Exit Full Screen Mode, or press the &Esc; key.

&kig; supports a rather large number of object types. Please note that not all of the available object types are shown in the toolbars: there are some objects that you can only construct via the Objects menu in the menu bar. Of course, as with all &kde; applications, the contents of the toolbars are configurable. Try out the SettingsConfigure Toolbars... option if you want to do this.

&kig; has context menus for its objects. Try &RMB; clicking on an object in order to see a context menu appear. There are many options: for constructing other objects, setting colours, and even hiding, moving or deleting objects. Some objects have options of their own (⪚ you can redefine certain points to be constrained to a line if they previously weren't, &etc;). These options should be very straightforward to understand.

Right-clicking on the document (&ie; not on an object) will present a popup that you can use to start constructing a new object, change the coordinate system used, show hidden objects, and even zoom in and zoom out of the document.

One of the more advanced features in &kig; is its support for macros. This allows you to define new types of objects from other ones which are defined already. For example: Suppose you want to make a macro for constructing a circle from three points on it. You would input three points, then construct some perpendiculars and midpoints until you find the center. Now you can use the existing Construct a circle by center and point command (using one of the three points as the point for this command). The following image should make this a bit more clear: Test running macros Test running macros Next comes defining the macro. Select New macro from the Type menu, or click on the button on the toolbar. A wizard will appear and ask you to select the given objects. In our example, these are the three points. Select the three points (click on them to select, click again to unselect) and click the Next button to continue. Finally, select the last objects (only the circle in our example). The macro wizard The macro wizard After the previous steps are completed, click the Next button to continue. Enter a name and optionally a description for your new type, and click the Finish button. Your macro type is now finished. To use the new macro type, click its button on the toolbar or use the Objects menu. Constructing a macro object is just like constructing any other object. Using your new type Using your new type

As you saw in the previous chapter, &kig; allows you to create your own objects. &kig; also makes sure that once you have created an object, it is saved on exit and loaded on startup. You do not have to manually save or load macro definitions. However, &kig; does allow you to do more with the macros. If you select TypesManage Types... from the menu, you will see a dialog where you can edit your types. It allows you to modify the existant types, delete types that are no longer used, export them to a file, or even load them from another file. Edit Types Dialog The Edit Types Dialog

&kig; allows you to add text labels to a construction. This is very useful for adding names, explanations or other text to constructions. &kig; can also display variable information about objects (also known as properties). To start constructing a text label, simply press the Text Label button in the &kig; toolbar or select ObjectsOther Text label in the menubar. Next, you have to choose a location for the text label. You can either just select a random location on the screen, or choose to attach the label to an object. Attaching a label to a circle... Attaching a label to a circle... After you have selected where to put the label, the text label dialog appears. Here, you can type in the text that you want in the new label, and click Finish. You should now see the label in your document. The Text Label Dialog The Text Label Dialog The previous example was a simple one, and limited to just text. However, there is also support for showing variable information about objects in a label (⪚ you can construct a label with the text This segment is %1 units long. where %1 would be dynamically replaced with the length of a specific segment). To do this, enter a text with a number of placeholders ( %1, %2 &etc;) in it. Then, press the Next button to continue. If you want to change the text or variables later, you can go back using the Back button. The wizard now shows the text you entered with all placeholders replaced by something like argument 1. Selecting the property connected to a certain argument is done by first clicking on the argument in question. Then click on the object that you need and that has this property, and then select the property itself in the popup menu that appears. For instance, in the example above, you would click argument 1, click on the correct segment in the main &kig; window, and select the property Length. Afterwards, you can fill in the rest of the variable parts, or select another property for one of the variable parts if you wish to change it. When you are ready, click the Finish button to complete the construction of the text label. Selecting a property for a variable part Selecting a property for a variable part

&kig; supports the use of locuses. A locus is mathematically defined as the set of all points or lines that satisfy or are determined by specific conditions; as in the locus of points equidistant from a given point is a circle. Let's look at an example of how to use locuses in &kig;: Consider the following geometrical construction: We draw a circle, and a point that can move only along its circumference (construct this point by positioning the cursor on a circle, and clicking the &MMB;. If you then try to move the resulting point, you'll see that you cannot move it off the circle). Then, we draw a segment from that point to the center of the circle, and the midpoint of that segment. A simple construction using a locus A simple construction using a locus Now if you move the point that is constrained to the circle, you'll see that the second point moves along with it. If you were to hold a pen at the second point, and move the first point around the entire circle, a new circle, half the size of the other would be drawn. The path that the second point travels while the first one moves around the circle is its locus. Actually constructing the locus of a point is very easy. Click the locus button in the toolbar, or select Objects Other Locus from the menubar. Then select the constrained point as the moving point (the text Moving Point will appear as you move the mouse over it), and the other as the dependent point. The locus of the dependent point will then be drawn.

&kig; allows you to create custom types in the Python scripting language. This is a very advanced feature, and I know of only one other Interactive Geometry program that has a similar functionality (the GNOME program &drgeo;). Python Scripting in &kig; basically allows you to create your own objects from certain parent objects. For example, if you are a math teacher, and you have some fancy way of calculating an interesting point on a conic, then instead of messing with complex constructions and macros, you could just write down in Python code how the point is to be calculated and then &kig; will show it for you. Suppose you were not aware of the &kig; built-in type Mid Point, and you wanted to show the midpoint of two given points. You would then click on the Python Script button in the toolbar, or select ObjectsOther Python Script from the menubar. You are then presented with a wizard that allows you to proceed. The Script Object Wizard The Script Object Wizard The first thing you have to do is select the arguments for the script object. In our example, this means the two points of which we want to show the midpoint. Select them in the &kig; main window, and click Next to proceed. Now you are presented with a text edit box where you can enter the code for you script object. Template code and some comments are already in place. It is important to make sure that your code is valid Python code. People familiar with Python will notice that we are actually defining a Python function called calc. It is therefore necessary to adhere to the Python rules for defining functions. For example, every line of the function should start with a Tab. The first line not starting with a tab ends the definition of the function. The Python function that we want to define is called calc, and in our case it accepts two arguments. These are the objects you have selected as arguments in the previous screen. You need as many arguments as you have selected there. They are called arg1 and arg2, but you can change their names to something more meaningful if you want. In the function, you can do all sorts of calculations that you deem necessary, using the two arguments if needed. You should return the object you want to define. In our case, this is a Point object. The two arguments are also Point objects, and we can use the Point.coordinate() function to define the coordinates of the two given points. The calculation necessary in our example is very simple, we simply add the two sets of coordinates, and divide the new set by two. We then construct a new point using the result. The Python code needed is: def calc( a, b ): m = ( a.coordinate() + b.coordinate() ) / 2; return Point( m ) Entering the code Entering the code for the midpoint in the Script Object wizard. If you now click the Finish button, the new object will appear in the &kig; document. If you move one of the points, the newly created point will move along with it. Much more powerful objects can be built in this way: you are encouraged to try it out. Constructed a Script Object The newly constructed Script Object. All objects in &kig; can be used in the Python code. As we have seen above, points are of the Point class, and you can use ⪚ the Point.coordinate() method. You can also return all kinds of objects, not just a Point. Many more classes and methods are available in the &kig; Python code, and a more complete reference is provided on the &kig; website. &kig; is an open source application. This means that you are free to use and modify it any way you like it. Distributing &kig; is subject to some restrictions, basically that everyone should have the same rights to use &kig;, including your modifications, as you and me. Free software programs are developed in a very open spirit, and its developers are usually very responsive to user feedback. Therefore, if you have any questions, complaints, or whatever about &kig;, please let the author know at toscano.pino@tiscali.it. &kig; is a KPart application, which means that you can embed it into other &kde; software. If you open a .kig file in &konqueror;, it can be opened directly in the &konqueror; screen without the need to start an external application. Working with &kig; should be very straightforward. Constructing objects is easy and interactive, with preliminary results being shown, &etc;. Moving, selecting and building all work as one would expect them to. Undo support should also be very intuitive. &kig; supports macros to be defined in a straightforward manner. These objects are presented to the user like normal objects. They are saved on exit and loaded on startup, so that they aren't lost on exit. You can manage these objects in the Manage Types dialog (see ). You can export them to files, import them from files, edit and delete them. &kig; saves its data in a clear &XML; format. &kig; supports the construction of locuses. &kig; allows you to export a &kig; file to some interesting formats, like images, XFig and LaTeX files, and SVG vectorial images. This is rather useful, because not all programs support the &kig; file format yet. &kig; has a very flexible transformation system. &kig; aims to be compatible with its competitors. This is why it supports the &kgeo; file format, the &kseg; file format and partially the &drgeo; and &cabri; formats; morover, support for other formats is planned. &reporting.bugs; &updating.documentation; &kig; &kig; copyright 2002-2004 Dominique Devriese devriese@kde.org Documentation copyright 2002-2004 Dominique Devriese devriese@kde.org. Documentation copyright 2004-2005 Pino Toscano toscano.pino@tiscali.it. Reviewed by &Philip.Rodrigues; &Philip.Rodrigues.mail;. &underFDL; &underGPL; &install.intro.documentation; &install.compile.documentation;

&kig; is Free Software. This means that its source code is freely available on the Internet, and everyone can use it, read it, modify it, and distribute it. I work on it as a hobby project, and I have already learned a lot about programming, C++, &kde;/&Qt;, math, software collaboration and open source projects in the process.

In this chapter I want to point out to you (the user) the rights that &kig;'s license gives you. As with all free software, you are allowed (and encouraged) to fix problems you encounter while using it, to add features you miss, to distribute your modified program, and to send these modifications to me at toscano.pino@tiscali.it, so that I can include them in the next version for others to enjoy. Please note I personally have no financial interest in this project whatsoever. If you are uncertain of your rights to use this software, or other people's right to use any modifications you make to this program &etc;, please read the license. You can find it in the COPYING file in the &kig; source tree or the license tab in the About Kig dialog.

Any contributions are welcome. If you don't like the icons, or think that the manual needs updating, or if you have this really cool macro that you want to share with the world, do not hesitate to send it to me. Please note that your contributions will be distributed under the terms of the &GNU; GPL; you can find the terms of this license in the COPYING file in the &kig; source tree, and in the Credits and Licenses chapter in this manual.

&documentation.index;