Greatly improve tdehwlib polling performance

This relates to Bug 1992

1 files changed, 335 insertions, 167 deletions

diff --git a/tdecore/tdehw/tdehardwaredevices.cpp b/tdecore/tdehw/tdehardwaredevices.cpp
index 30d06a75c..092fba2cb 100644
--- a/tdecore/tdehw/tdehardwaredevices.cpp
+++ b/tdecore/tdehw/tdehardwaredevices.cpp
@@ -70,6 +70,24 @@ extern "C" {
 // Compile-time configuration
 #include "config.h"
 
+// Profiling stuff
+//#define CPUPROFILING
+//#define STATELESSPROFILING
+
+#include <time.h>
+timespec diff(timespec start, timespec end)
+{
+	timespec temp;
+	if ((end.tv_nsec-start.tv_nsec)<0) {
+		temp.tv_sec = end.tv_sec-start.tv_sec-1;
+		temp.tv_nsec = 1000000000+end.tv_nsec-start.tv_nsec;
+	} else {
+		temp.tv_sec = end.tv_sec-start.tv_sec;
+		temp.tv_nsec = end.tv_nsec-start.tv_nsec;
+	}
+	return temp;
+}
+
 // BEGIN BLOCK
 // Copied from include/linux/genhd.h
 #define GENHD_FL_REMOVABLE                      1
@@ -199,6 +217,10 @@ TDEHardwareDevices::TDEHardwareDevices() {
 		m_deviceWatchTimer = new TQTimer(this);
 		connect( m_deviceWatchTimer, SIGNAL(timeout()), this, SLOT(processStatelessDevices()) );
 
+		// Special case for battery polling (longer delay, 5 seconds)
+		m_batteryWatchTimer = new TQTimer(this);
+		connect( m_batteryWatchTimer, SIGNAL(timeout()), this, SLOT(processBatteryDevices()) );
+
 		// Update internal device information
 		queryHardwareInformation();
 	}
@@ -207,6 +229,7 @@ TDEHardwareDevices::TDEHardwareDevices() {
 TDEHardwareDevices::~TDEHardwareDevices() {
 	// Stop device scanning
 	m_deviceWatchTimer->stop();
+	m_batteryWatchTimer->stop();
 
 // [FIXME 0.01]
 #if 0
@@ -243,6 +266,7 @@ void TDEHardwareDevices::setTriggerlessHardwareUpdatesEnabled(bool enable) {
 		if (nodezerocpufreq.exists()) {
 			m_cpuWatchTimer->start( 500, FALSE ); // 0.5 second repeating timer
 		}
+		m_batteryWatchTimer->stop(); // Battery devices are included in stateless devices
 		m_deviceWatchTimer->start( 1000, FALSE ); // 1 second repeating timer
 	}
 	else {
@@ -251,6 +275,20 @@ void TDEHardwareDevices::setTriggerlessHardwareUpdatesEnabled(bool enable) {
 	}
 }
 
+void TDEHardwareDevices::setBatteryUpdatesEnabled(bool enable) {
+	if (enable) {
+		TQDir nodezerocpufreq("/sys/devices/system/cpu/cpu0/cpufreq");
+		if (nodezerocpufreq.exists()) {
+			m_cpuWatchTimer->start( 500, FALSE ); // 0.5 second repeating timer
+		}
+		m_batteryWatchTimer->start( 5000, FALSE ); // 5 second repeating timer
+	}
+	else {
+		m_cpuWatchTimer->stop();
+		m_batteryWatchTimer->stop();
+	}
+}
+
 void TDEHardwareDevices::rescanDeviceInformation(TDEGenericDevice* hwdevice) {
 	rescanDeviceInformation(hwdevice, true);
 }
@@ -270,6 +308,7 @@ TDEGenericDevice* TDEHardwareDevices::findBySystemPath(TQString syspath) {
 		syspath += "/";
 	}
 	TDEGenericDevice *hwdevice;
+
 	// We can't use m_deviceList directly as m_deviceList can only have one iterator active against it at any given time
 	TDEGenericHardwareList devList = listAllPhysicalDevices();
 	for ( hwdevice = devList.first(); hwdevice; hwdevice = devList.next() ) {
@@ -281,6 +320,30 @@ TDEGenericDevice* TDEHardwareDevices::findBySystemPath(TQString syspath) {
 	return 0;
 }
 
+TDECPUDevice* TDEHardwareDevices::findCPUBySystemPath(TQString syspath, bool inCache=true) {
+	TDECPUDevice* cdevice;
+	
+	// Look for the device in the cache first
+	if(inCache && !m_cpuByPathCache.isEmpty()) {
+		cdevice = m_cpuByPathCache.find(syspath);
+		if(cdevice) {
+			return cdevice;
+		}
+	}
+
+	// If the CPU was not found in cache, we need to parse the entire device list to get it.
+	cdevice = dynamic_cast<TDECPUDevice*>(findBySystemPath(syspath));
+	if(cdevice) {
+		if(inCache) {
+			m_cpuByPathCache.insert(syspath, cdevice); // Add the device to the cache
+		}
+		return cdevice;
+	}
+	
+	return 0;
+}
+
+
 TDEGenericDevice* TDEHardwareDevices::findByUniqueID(TQString uid) {
 	TDEGenericDevice *hwdevice;
 	// We can't use m_deviceList directly as m_deviceList can only have one iterator active against it at any given time
@@ -410,17 +473,29 @@ void TDEHardwareDevices::processModifiedCPUs() {
 	// Detect what changed between the old cpu information and the new information,
 	// and emit appropriate events
 
+#ifdef CPUPROFILING
+	timespec time1, time2, time3;
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time1);
+	time3 = time1;
+	printf("TDEHardwareDevices::processModifiedCPUs() : begin at '%u'\n", time1.tv_nsec);
+#endif
+
 	// Read new CPU information table
 	m_cpuInfo.clear();
 	TQFile cpufile( "/proc/cpuinfo" );
 	if ( cpufile.open( IO_ReadOnly ) ) {
 		TQTextStream stream( &cpufile );
-		while ( !stream.atEnd() ) {
-			m_cpuInfo.append(stream.readLine());
-		}
+		// Using read() instead of readLine() inside a loop is 4 times faster !
+		m_cpuInfo = TQStringList::split('\n', stream.read(), true);
 		cpufile.close();
 	}
 
+#ifdef CPUPROFILING
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time2);
+	printf("TDEHardwareDevices::processModifiedCPUs() : checkpoint1 at %u [%u]\n", time2.tv_nsec, diff(time1,time2).tv_nsec);
+	time1 = time2;
+#endif
+
 	// Ensure "processor" is the first entry in each block and determine which cpuinfo type is in use
 	bool cpuinfo_format_x86 = true;
 	bool cpuinfo_format_arm = false;
@@ -431,39 +506,43 @@ void TDEHardwareDevices::processModifiedCPUs() {
 	TQStringList::Iterator blockBegin = m_cpuInfo.begin();
 	for (TQStringList::Iterator cpuit1 = m_cpuInfo.begin(); cpuit1 != m_cpuInfo.end(); ++cpuit1) {
 		curline1 = *cpuit1;
-		curline1 = curline1.stripWhiteSpace();
 		if (!(*blockBegin).startsWith("processor")) {
 			bool found = false;
 			TQStringList::Iterator cpuit2;
 			for (cpuit2 = blockBegin; cpuit2 != m_cpuInfo.end(); ++cpuit2) {
 				curline2 = *cpuit2;
-				curline2 = curline2.stripWhiteSpace();
 				if (curline2.startsWith("processor")) {
 					found = true;
 					break;
 				}
-				else if (curline2 == "") {
+				else if (curline2 == NULL || curline2 == "") {
 					break;
 				}
 			}
 			if (found) {
 				m_cpuInfo.insert(blockBegin, (*cpuit2));
 			}
-			else {
+			else if(blockNumber == 0) {
 				m_cpuInfo.insert(blockBegin, "processor : 0");
 			}
 		}
-		if (curline1 == "") {
+		if (curline1 == NULL || curline1 == "") {
 			blockNumber++;
 			blockBegin = cpuit1;
 			blockBegin++;
 		}
-		if (curline1.startsWith("Processor")) {
+		else if (curline1.startsWith("Processor")) {
 			cpuinfo_format_x86 = false;
 			cpuinfo_format_arm = true;
 		}
 	}
 
+#ifdef CPUPROFILING
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time2);
+	printf("TDEHardwareDevices::processModifiedCPUs() : checkpoint2 at %u [%u]\n", time2.tv_nsec, diff(time1,time2).tv_nsec);
+	time1 = time2;
+#endif
+
 	// Parse CPU information table
 	TDECPUDevice *cdevice;
 	cdevice = 0;
@@ -482,44 +561,45 @@ void TDEHardwareDevices::processModifiedCPUs() {
 		for (cpuit = m_cpuInfo.begin(); cpuit != m_cpuInfo.end(); ++cpuit) {
 			curline = *cpuit;
 			if (curline.startsWith("processor")) {
-				curline.remove(0, curline.find(":")+1);
-				curline = curline.stripWhiteSpace();
+				curline.remove(0, curline.find(":")+2);
 				processorNumber = curline.toInt();
-				if (!cdevice) cdevice = dynamic_cast<TDECPUDevice*>(findBySystemPath(TQString("/sys/devices/system/cpu/cpu%1").arg(processorNumber)));
+				if (!cdevice) {
+					cdevice = dynamic_cast<TDECPUDevice*>(findCPUBySystemPath(TQString("/sys/devices/system/cpu/cpu%1").arg(processorNumber)));
+				}
 				if (cdevice) {
-					if (cdevice->coreNumber() != processorNumber) modified = true;
-					cdevice->internalSetCoreNumber(processorNumber);
+					if (cdevice->coreNumber() != processorNumber) {
+						modified = true;
+						cdevice->internalSetCoreNumber(processorNumber);
+					}
 				}
 			}
-			if (curline.startsWith("model name")) {
-				curline.remove(0, curline.find(":")+1);
-				curline = curline.stripWhiteSpace();
-				if (cdevice) {
-					if (cdevice->name() != curline) modified = true;
+			else if (cdevice && curline.startsWith("model name")) {
+				curline.remove(0, curline.find(":")+2);
+				if (cdevice->name() != curline) {
+					modified = true;
 					cdevice->internalSetName(curline);
 				}
 			}
-			if (curline.startsWith("cpu MHz")) {
-				curline.remove(0, curline.find(":")+1);
-				curline = curline.stripWhiteSpace();
-				if (cdevice) {
-					if (cdevice->frequency() != curline.toDouble()) modified = true;
+			else if (cdevice && curline.startsWith("cpu MHz")) {
+				curline.remove(0, curline.find(":")+2);
+				if (cdevice->frequency() != curline.toDouble()) {
+					modified = true;
 					cdevice->internalSetFrequency(curline.toDouble());
-					have_frequency = true;
 				}
+				have_frequency = true;
 			}
-			if (curline.startsWith("vendor_id")) {
-				curline.remove(0, curline.find(":")+1);
-				curline = curline.stripWhiteSpace();
-				if (cdevice) {
-					if (cdevice->vendorName() != curline) modified = true;
+			else if (cdevice && curline.startsWith("vendor_id")) {
+				curline.remove(0, curline.find(":")+2);
+				if (cdevice->vendorName() != curline) {
+					modified = true;
 					cdevice->internalSetVendorName(curline);
-					if (cdevice->vendorEncoded() != curline) modified = true;
+				}
+				if (cdevice->vendorEncoded() != curline) {
+					modified = true;
 					cdevice->internalSetVendorEncoded(curline);
 				}
 			}
-			curline = curline.stripWhiteSpace();
-			if (curline == "") {
+			else if (curline == NULL || curline == "") {
 				cdevice = 0;
 			}
 		}
@@ -535,29 +615,25 @@ void TDEHardwareDevices::processModifiedCPUs() {
 		for (cpuit = m_cpuInfo.begin(); cpuit != m_cpuInfo.end(); ++cpuit) {
 			curline = *cpuit;
 			if (curline.startsWith("Processor")) {
-				curline.remove(0, curline.find(":")+1);
-				curline = curline.stripWhiteSpace();
+				curline.remove(0, curline.find(":")+2);
 				modelName = curline;
 			}
-			if (curline.startsWith("Hardware")) {
-				curline.remove(0, curline.find(":")+1);
-				curline = curline.stripWhiteSpace();
+			else if (curline.startsWith("Hardware")) {
+				curline.remove(0, curline.find(":")+2);
 				vendorName = curline;
 			}
-			if (curline.startsWith("Serial")) {
-				curline.remove(0, curline.find(":")+1);
-				curline = curline.stripWhiteSpace();
+			else if (curline.startsWith("Serial")) {
+				curline.remove(0, curline.find(":")+2);
 				serialNumber = curline;
 			}
 		}
 		for (TQStringList::Iterator cpuit = m_cpuInfo.begin(); cpuit != m_cpuInfo.end(); ++cpuit) {
 			curline = *cpuit;
 			if (curline.startsWith("processor")) {
-				curline.remove(0, curline.find(":")+1);
-				curline = curline.stripWhiteSpace();
+				curline.remove(0, curline.find(":")+2);
 				processorNumber = curline.toInt();
 				if (!cdevice) {
-					cdevice = dynamic_cast<TDECPUDevice*>(findBySystemPath(TQString("/sys/devices/system/cpu/cpu%1").arg(processorNumber)));
+					cdevice = dynamic_cast<TDECPUDevice*>(findCPUBySystemPath(TQString("/sys/devices/system/cpu/cpu%1").arg(processorNumber)));
 					if (cdevice) {
 						// Set up CPU information structures
 						if (cdevice->coreNumber() != processorNumber) modified = true;
@@ -573,8 +649,7 @@ void TDEHardwareDevices::processModifiedCPUs() {
 					}
 				}
 			}
-			curline = curline.stripWhiteSpace();
-			if (curline == "") {
+			if (curline == NULL || curline == "") {
 				cdevice = 0;
 			}
 		}
@@ -582,9 +657,17 @@ void TDEHardwareDevices::processModifiedCPUs() {
 
 	processorCount = processorNumber+1;
 
+#ifdef CPUPROFILING
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time2);
+	printf("TDEHardwareDevices::processModifiedCPUs() : checkpoint3 at %u [%u]\n", time2.tv_nsec, diff(time1,time2).tv_nsec);
+	time1 = time2;
+#endif
+
+	TDECPUDevice* firstCPU;
+	
 	// Read in other information from cpufreq, if available
 	for (processorNumber=0; processorNumber<processorCount; processorNumber++) {
-		cdevice = dynamic_cast<TDECPUDevice*>(findBySystemPath(TQString("/sys/devices/system/cpu/cpu%1").arg(processorNumber)));
+		cdevice = dynamic_cast<TDECPUDevice*>(findCPUBySystemPath(TQString("/sys/devices/system/cpu/cpu%1").arg(processorNumber)));
 		TQDir cpufreq_dir(TQString("/sys/devices/system/cpu/cpu%1/cpufreq").arg(processorNumber));
 		TQString scalinggovernor;
 		TQString scalingdriver;
@@ -595,107 +678,131 @@ void TDEHardwareDevices::processModifiedCPUs() {
 		TQStringList frequencylist;
 		TQStringList governorlist;
 		if (cpufreq_dir.exists()) {
-			TQString nodename = cpufreq_dir.path();
-			nodename.append("/scaling_governor");
-			TQFile scalinggovernorfile(nodename);
-			if (scalinggovernorfile.open(IO_ReadOnly)) {
-				TQTextStream stream( &scalinggovernorfile );
-				scalinggovernor = stream.readLine();
-				scalinggovernorfile.close();
-			}
-			nodename = cpufreq_dir.path();
-			nodename.append("/scaling_driver");
-			TQFile scalingdriverfile(nodename);
-			if (scalingdriverfile.open(IO_ReadOnly)) {
-				TQTextStream stream( &scalingdriverfile );
-				scalingdriver = stream.readLine();
-				scalingdriverfile.close();
-			}
-			nodename = cpufreq_dir.path();
-			nodename.append("/cpuinfo_min_freq");
-			TQFile minfrequencyfile(nodename);
-			if (minfrequencyfile.open(IO_ReadOnly)) {
-				TQTextStream stream( &minfrequencyfile );
-				minfrequency = stream.readLine().toDouble()/1000.0;
-				minfrequencyfile.close();
-			}
-			nodename = cpufreq_dir.path();
-			nodename.append("/cpuinfo_max_freq");
-			TQFile maxfrequencyfile(nodename);
-			if (maxfrequencyfile.open(IO_ReadOnly)) {
-				TQTextStream stream( &maxfrequencyfile );
-				maxfrequency = stream.readLine().toDouble()/1000.0;
-				maxfrequencyfile.close();
+			TQString nodename;
+			if(processorNumber == 0) {
+				// Remember the first CPU options so that we can reuse it later.
+				firstCPU = cdevice;
+				
+				nodename = cpufreq_dir.path();
+				nodename.append("/scaling_governor");
+				TQFile scalinggovernorfile(nodename);
+				if (scalinggovernorfile.open(IO_ReadOnly)) {
+					TQTextStream stream( &scalinggovernorfile );
+					scalinggovernor = stream.read();
+					scalinggovernorfile.close();
+				}
+				nodename = cpufreq_dir.path();
+				nodename.append("/scaling_driver");
+				TQFile scalingdriverfile(nodename);
+				if (scalingdriverfile.open(IO_ReadOnly)) {
+					TQTextStream stream( &scalingdriverfile );
+					scalingdriver = stream.read();
+					scalingdriverfile.close();
+				}
+				nodename = cpufreq_dir.path();
+				nodename.append("/cpuinfo_min_freq");
+				TQFile minfrequencyfile(nodename);
+				if (minfrequencyfile.open(IO_ReadOnly)) {
+					TQTextStream stream( &minfrequencyfile );
+					minfrequency = stream.read().toDouble()/1000.0;
+					minfrequencyfile.close();
+				}
+				nodename = cpufreq_dir.path();
+				nodename.append("/cpuinfo_max_freq");
+				TQFile maxfrequencyfile(nodename);
+				if (maxfrequencyfile.open(IO_ReadOnly)) {
+					TQTextStream stream( &maxfrequencyfile );
+					maxfrequency = stream.read().toDouble()/1000.0;
+					maxfrequencyfile.close();
+				}
+				nodename = cpufreq_dir.path();
+				nodename.append("/cpuinfo_transition_latency");
+				TQFile trlatencyfile(nodename);
+				if (trlatencyfile.open(IO_ReadOnly)) {
+					TQTextStream stream( &trlatencyfile );
+					trlatency = stream.read().toDouble()/1000.0;
+					trlatencyfile.close();
+				}
+				nodename = cpufreq_dir.path();
+				nodename.append("/scaling_available_frequencies");
+				TQFile availfreqsfile(nodename);
+				if (availfreqsfile.open(IO_ReadOnly)) {
+					TQTextStream stream( &availfreqsfile );
+					frequencylist = TQStringList::split(" ", stream.read());
+					availfreqsfile.close();
+				}
+				nodename = cpufreq_dir.path();
+				nodename.append("/scaling_available_governors");
+				TQFile availgvrnsfile(nodename);
+				if (availgvrnsfile.open(IO_ReadOnly)) {
+					TQTextStream stream( &availgvrnsfile );
+					governorlist = TQStringList::split(" ", stream.read());
+					availgvrnsfile.close();
+				}
 			}
-			nodename = cpufreq_dir.path();
-			nodename.append("/cpuinfo_transition_latency");
-			TQFile trlatencyfile(nodename);
-			if (trlatencyfile.open(IO_ReadOnly)) {
-				TQTextStream stream( &trlatencyfile );
-				trlatency = stream.readLine().toDouble()/1000.0;
-				trlatencyfile.close();
+			// Other CPU should have the same values as the first one. Simply copy them.
+			else {
+				scalinggovernor = firstCPU->governor();
+				scalingdriver = firstCPU->scalingDriver();
+				minfrequency = firstCPU->minFrequency();
+				maxfrequency = firstCPU->maxFrequency();
+				trlatency = firstCPU->transitionLatency();
+				frequencylist = firstCPU->availableFrequencies();
+				governorlist = firstCPU->availableGovernors();
 			}
+
+			// The following data are different on each CPU
 			nodename = cpufreq_dir.path();
 			nodename.append("/affected_cpus");
 			TQFile tiedcpusfile(nodename);
 			if (tiedcpusfile.open(IO_ReadOnly)) {
 				TQTextStream stream( &tiedcpusfile );
-				affectedcpulist = TQStringList::split(" ", stream.readLine());
+				affectedcpulist = TQStringList::split(" ", stream.read());
 				tiedcpusfile.close();
 			}
-			nodename = cpufreq_dir.path();
-			nodename.append("/scaling_available_frequencies");
-			TQFile availfreqsfile(nodename);
-			if (availfreqsfile.open(IO_ReadOnly)) {
-				TQTextStream stream( &availfreqsfile );
-				frequencylist = TQStringList::split(" ", stream.readLine());
-				availfreqsfile.close();
-			}
-			nodename = cpufreq_dir.path();
-			nodename.append("/scaling_available_governors");
-			TQFile availgvrnsfile(nodename);
-			if (availgvrnsfile.open(IO_ReadOnly)) {
-				TQTextStream stream( &availgvrnsfile );
-				governorlist = TQStringList::split(" ", stream.readLine());
-				availgvrnsfile.close();
-			}
 
+			// We may already have the CPU Mhz information in '/proc/cpuinfo'
 			if (!have_frequency) {
 				nodename = cpufreq_dir.path();
 				nodename.append("/cpuinfo_cur_freq");
 				TQFile cpufreqfile(nodename);
 				if (cpufreqfile.open(IO_ReadOnly)) {
 					TQTextStream stream( &cpufreqfile );
-					if (cdevice) cdevice->internalSetFrequency(stream.readLine().toDouble()/1000.0);
+					if (cdevice) {
+						cdevice->internalSetFrequency(stream.read().toDouble()/1000.0);
+					}
 					cpufreqfile.close();
 					have_frequency = true;
 				}
 			}
 
-			bool frequencyFound;
+			bool minfrequencyFound = false;
+			bool maxfrequencyFound = false;
 			TQStringList::Iterator freqit;
-			frequencyFound = false;
 			for ( freqit = frequencylist.begin(); freqit != frequencylist.end(); ++freqit ) {
 				double thisfrequency = (*freqit).toDouble()/1000.0;
 				if (thisfrequency == minfrequency) {
-					frequencyFound = true;
+					minfrequencyFound = true;
+				}
+				if (thisfrequency == maxfrequency) {
+					maxfrequencyFound = true;
 				}
+
 			}
-			if (!frequencyFound) {
+			if (!minfrequencyFound) {
 				int minFrequencyInt = (minfrequency*1000.0);
 				frequencylist.prepend(TQString("%1").arg(minFrequencyInt));
 			}
-			frequencyFound = false;
-			for ( freqit = frequencylist.begin(); freqit != frequencylist.end(); ++freqit ) {
-				double thisfrequency = (*freqit).toDouble()/1000.0;
-				if (thisfrequency == maxfrequency) {
-					frequencyFound = true;
-				}
-			}
-			if (!frequencyFound) {
+			if (!maxfrequencyFound) {
 				int maxfrequencyInt = (maxfrequency*1000.0);
 				frequencylist.append(TQString("%1").arg(maxfrequencyInt));
 			}
+
+#ifdef CPUPROFILING
+			clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time2);
+			printf("TDEHardwareDevices::processModifiedCPUs() : checkpoint3.%u at %u [%u]\n", processorNumber, time2.tv_nsec, diff(time1,time2).tv_nsec);
+			time1 = time2;
+#endif
 		}
 		else {
 			if (have_frequency) {
@@ -708,33 +815,61 @@ void TDEHardwareDevices::processModifiedCPUs() {
 
 		// Update CPU information structure
 		if (cdevice) {
-			if (cdevice->governor() != scalinggovernor) modified = true;
-			cdevice->internalSetGovernor(scalinggovernor);
-			if (cdevice->scalingDriver() != scalingdriver) modified = true;
-			cdevice->internalSetScalingDriver(scalingdriver);
-			if (cdevice->minFrequency() != minfrequency) modified = true;
-			cdevice->internalSetMinFrequency(minfrequency);
-			if (cdevice->maxFrequency() != maxfrequency) modified = true;
-			cdevice->internalSetMaxFrequency(maxfrequency);
-			if (cdevice->transitionLatency() != trlatency) modified = true;
-			cdevice->internalSetTransitionLatency(trlatency);
-			if (cdevice->dependentProcessors().join(" ") != affectedcpulist.join(" ")) modified = true;
-			cdevice->internalSetDependentProcessors(affectedcpulist);
-			if (cdevice->availableFrequencies().join(" ") != frequencylist.join(" ")) modified = true;
-			cdevice->internalSetAvailableFrequencies(frequencylist);
-			if (cdevice->availableGovernors().join(" ") != governorlist.join(" ")) modified = true;
-			cdevice->internalSetAvailableGovernors(governorlist);
+			if (cdevice->governor() != scalinggovernor) {
+				modified = true;
+				cdevice->internalSetGovernor(scalinggovernor);
+			}
+			if (cdevice->scalingDriver() != scalingdriver) {
+				modified = true;
+				cdevice->internalSetScalingDriver(scalingdriver);
+			}
+			if (cdevice->minFrequency() != minfrequency) {
+				modified = true;
+				cdevice->internalSetMinFrequency(minfrequency);
+			}
+			if (cdevice->maxFrequency() != maxfrequency) {
+				modified = true;
+				cdevice->internalSetMaxFrequency(maxfrequency);
+			}
+			if (cdevice->transitionLatency() != trlatency) {
+				modified = true;
+				cdevice->internalSetTransitionLatency(trlatency);
+			}
+			if (cdevice->dependentProcessors().join(" ") != affectedcpulist.join(" ")) {
+				modified = true;
+				cdevice->internalSetDependentProcessors(affectedcpulist);
+			}
+			if (cdevice->availableFrequencies().join(" ") != frequencylist.join(" ")) {
+				modified = true;
+				cdevice->internalSetAvailableFrequencies(frequencylist);
+			}
+			if (cdevice->availableGovernors().join(" ") != governorlist.join(" ")) {
+				modified = true;
+				cdevice->internalSetAvailableGovernors(governorlist);
+			}
 		}
 	}
 
+#ifdef CPUPROFILING
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time2);
+	printf("TDEHardwareDevices::processModifiedCPUs() : checkpoint4 at %u [%u]\n", time2.tv_nsec, diff(time1,time2).tv_nsec);
+	time1 = time2;
+#endif
+
 	if (modified) {
 		for (processorNumber=0; processorNumber<processorCount; processorNumber++) {
-			TDEGenericDevice* hwdevice = findBySystemPath(TQString("/sys/devices/system/cpu/cpu%1").arg(processorNumber));
+			TDEGenericDevice* hwdevice = findCPUBySystemPath(TQString("/sys/devices/system/cpu/cpu%1").arg(processorNumber));
 			// Signal new information available
 			emit hardwareUpdated(hwdevice);
 			emit hardwareEvent(TDEHardwareEvent::HardwareUpdated, hwdevice->uniqueID());
 		}
 	}
+	
+#ifdef CPUPROFILING
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time2);
+	printf("TDEHardwareDevices::processModifiedCPUs() : end at %u [%u]\n", time2.tv_nsec, diff(time1,time2).tv_nsec);
+	printf("TDEHardwareDevices::processModifiedCPUs() : total time: %u\n", diff(time3,time2).tv_nsec);
+#endif
 }
 
 void TDEHardwareDevices::processStatelessDevices() {
@@ -742,6 +877,13 @@ void TDEHardwareDevices::processStatelessDevices() {
 	// So far, network cards and sensors need to be polled
 	TDEGenericDevice *hwdevice;
 
+#ifdef STATELESSPROFILING
+	timespec time1, time2, time3;
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time1);
+	printf("TDEHardwareDevices::processStatelessDevices() : begin at '%u'\n", time1.tv_nsec);
+	time3 = time1;
+#endif
+
 	// We can't use m_deviceList directly as m_deviceList can only have one iterator active against it at any given time
 	TDEGenericHardwareList devList = listAllPhysicalDevices();
 	for ( hwdevice = devList.first(); hwdevice; hwdevice = devList.next() ) {
@@ -749,10 +891,36 @@ void TDEHardwareDevices::processStatelessDevices() {
 			rescanDeviceInformation(hwdevice, false);
 			emit hardwareUpdated(hwdevice);
 			emit hardwareEvent(TDEHardwareEvent::HardwareUpdated, hwdevice->uniqueID());
+#ifdef STATELESSPROFILING
+			clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time2);
+			printf("TDEHardwareDevices::processStatelessDevices() : '%s' finished at %u [%u]\n", (hwdevice->name()).ascii(), time2.tv_nsec, diff(time1,time2).tv_nsec);
+			time1 = time2;
+#endif
+		}
+	}
+
+#ifdef STATELESSPROFILING
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time2);
+	printf("TDEHardwareDevices::processStatelessDevices() : end at '%u'\n", time2.tv_nsec);
+	printf("TDEHardwareDevices::processStatelessDevices() : took '%u'\n", diff(time3,time2).tv_nsec);
+#endif
+}
+
+void TDEHardwareDevices::processBatteryDevices() {
+	TDEGenericDevice *hwdevice;
+
+	// We can't use m_deviceList directly as m_deviceList can only have one iterator active against it at any given time
+	TDEGenericHardwareList devList = listAllPhysicalDevices();
+	for ( hwdevice = devList.first(); hwdevice; hwdevice = devList.next() ) {
+		if (hwdevice->type() == TDEGenericDeviceType::Battery) {
+			rescanDeviceInformation(hwdevice, false);
+			emit hardwareUpdated(hwdevice);
+			emit hardwareEvent(TDEHardwareEvent::HardwareUpdated, hwdevice->uniqueID());
 		}
 	}
 }
 
+
 void TDEHardwareDevices::processEventDeviceKeyPressed(unsigned int keycode, TDEEventDevice* edevice) {
 	emit eventDeviceKeyPressed(keycode, edevice);
 }
@@ -2556,13 +2724,13 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 						if (nodename == "address") {
 							ndevice->internalSetMacAddress(line);
 						}
-						if (nodename == "carrier") {
+						else if (nodename == "carrier") {
 							ndevice->internalSetCarrierPresent(line.toInt());
 						}
-						if (nodename == "dormant") {
+						else if (nodename == "dormant") {
 							ndevice->internalSetDormant(line.toInt());
 						}
-						if (nodename == "operstate") {
+						else if (nodename == "operstate") {
 							TQString friendlyState = line.lower();
 							friendlyState[0] = friendlyState[0].upper();
 							ndevice->internalSetState(friendlyState);
@@ -2594,7 +2762,7 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 									if (family == AF_INET) {
 										ndevice->internalSetIpV4Address(address);
 									}
-									if (family == AF_INET6) {
+									else if (family == AF_INET6) {
 										address.truncate(address.findRev("%"));
 										ndevice->internalSetIpV6Address(address);
 									}
@@ -2605,7 +2773,7 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 									if (family == AF_INET) {
 										ndevice->internalSetIpV4Netmask(address);
 									}
-									if (family == AF_INET6) {
+									else if (family == AF_INET6) {
 										address.truncate(address.findRev("%"));
 										ndevice->internalSetIpV6Netmask(address);
 									}
@@ -2616,7 +2784,7 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 									if (family == AF_INET) {
 										ndevice->internalSetIpV4Broadcast(address);
 									}
-									if (family == AF_INET6) {
+									else if (family == AF_INET6) {
 										address.truncate(address.findRev("%"));
 										ndevice->internalSetIpV6Broadcast(address);
 									}
@@ -2627,7 +2795,7 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 									if (family == AF_INET) {
 										ndevice->internalSetIpV4Destination(address);
 									}
-									if (family == AF_INET6) {
+									else if (family == AF_INET6) {
 										address.truncate(address.findRev("%"));
 										ndevice->internalSetIpV6Destination(address);
 									}
@@ -2658,13 +2826,13 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 							if (nodename == "rx_bytes") {
 								ndevice->internalSetRxBytes(line.toDouble());
 							}
-							if (nodename == "tx_bytes") {
+							else if (nodename == "tx_bytes") {
 								ndevice->internalSetTxBytes(line.toDouble());
 							}
-							if (nodename == "rx_packets") {
+							else if (nodename == "rx_packets") {
 								ndevice->internalSetRxPackets(line.toDouble());
 							}
-							if (nodename == "tx_packets") {
+							else if (nodename == "tx_packets") {
 								ndevice->internalSetTxPackets(line.toDouble());
 							}
 							file.close();
@@ -2705,19 +2873,19 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 						if (sensornodetype == "label") {
 							sensors[sensornodename].label = line;
 						}
-						if (sensornodetype == "input") {
+						else if (sensornodetype == "input") {
 							sensors[sensornodename].current = lineValue;
 						}
-						if (sensornodetype == "min") {
+						else if (sensornodetype == "min") {
 							sensors[sensornodename].minimum = lineValue;
 						}
-						if (sensornodetype == "max") {
+						else if (sensornodetype == "max") {
 							sensors[sensornodename].maximum = lineValue;
 						}
-						if (sensornodetype == "warn") {
+						else if (sensornodetype == "warn") {
 							sensors[sensornodename].warning = lineValue;
 						}
-						if (sensornodetype == "crit") {
+						else if (sensornodetype == "crit") {
 							sensors[sensornodename].critical = lineValue;
 						}
 						file.close();
@@ -2752,40 +2920,40 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 					if (nodename == "alarm") {
 						bdevice->internalSetAlarmEnergy(line.toDouble()/1000000.0);
 					}
-					if (nodename == "charge_full" || nodename == "energy_full") {
+					else if (nodename == "charge_full" || nodename == "energy_full") {
 						bdevice->internalSetMaximumEnergy(line.toDouble()/1000000.0);
 					}
-					if (nodename == "charge_full_design" || nodename == "energy_full_design") {
+					else if (nodename == "charge_full_design" || nodename == "energy_full_design") {
 						bdevice->internalSetMaximumDesignEnergy(line.toDouble()/1000000.0);
 					}
-					if (nodename == "charge_now" || nodename == "energy_now") {
+					else if (nodename == "charge_now" || nodename == "energy_now") {
 						bdevice->internalSetEnergy(line.toDouble()/1000000.0);
 					}
-					if (nodename == "manufacturer") {
+					else if (nodename == "manufacturer") {
 						bdevice->internalSetVendorName(line.stripWhiteSpace());
 					}
-					if (nodename == "model_name") {
+					else if (nodename == "model_name") {
 						bdevice->internalSetVendorModel(line.stripWhiteSpace());
 					}
-					if (nodename == "power_now" || nodename == "current_now") {
+					else if (nodename == "power_now" || nodename == "current_now") {
 						bdevice->internalSetDischargeRate(line.toDouble()/1000000.0);
 					}
-					if (nodename == "present") {
+					else if (nodename == "present") {
 						bdevice->internalSetInstalled(line.toInt());
 					}
-					if (nodename == "serial_number") {
+					else if (nodename == "serial_number") {
 						bdevice->internalSetSerialNumber(line.stripWhiteSpace());
 					}
-					if (nodename == "status") {
+					else if (nodename == "status") {
 						bdevice->internalSetStatus(line);
 					}
-					if (nodename == "technology") {
+					else if (nodename == "technology") {
 						bdevice->internalSetTechnology(line);
 					}
-					if (nodename == "voltage_min_design") {
+					else if (nodename == "voltage_min_design") {
 						bdevice->internalSetMinimumVoltage(line.toDouble()/1000000.0);
 					}
-					if (nodename == "voltage_now") {
+					else if (nodename == "voltage_now") {
 						bdevice->internalSetVoltage(line.toDouble()/1000000.0);
 					}
 					file.close();
@@ -2823,13 +2991,13 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 					if (nodename == "manufacturer") {
 						pdevice->internalSetVendorName(line.stripWhiteSpace());
 					}
-					if (nodename == "model_name") {
+					else if (nodename == "model_name") {
 						pdevice->internalSetVendorModel(line.stripWhiteSpace());
 					}
-					if (nodename == "online") {
+					else if (nodename == "online") {
 						pdevice->internalSetOnline(line.toInt());
 					}
-					if (nodename == "serial_number") {
+					else if (nodename == "serial_number") {
 						pdevice->internalSetSerialNumber(line.stripWhiteSpace());
 					}
 					file.close();
@@ -2868,10 +3036,10 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 						}
 						bdevice->internalSetPowerLevel(pl);
 					}
-					if (nodename == "max_brightness") {
+					else if (nodename == "max_brightness") {
 						bdevice->internalSetMaximumRawBrightness(line.toInt());
 					}
-					if (nodename == "actual_brightness") {
+					else if (nodename == "actual_brightness") {
 						bdevice->internalSetCurrentRawBrightness(line.toInt());
 					}
 					file.close();
@@ -2901,10 +3069,10 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 					if (nodename == "status") {
 						mdevice->internalSetConnected(line.lower() == "connected");
 					}
-					if (nodename == "enabled") {
+					else if (nodename == "enabled") {
 						mdevice->internalSetEnabled(line.lower() == "enabled");
 					}
-					if (nodename == "modes") {
+					else if (nodename == "modes") {
 						TQStringList resinfo;
 						TQStringList resolutionsStringList = line.upper();
 						while ((!stream.atEnd()) && (!line.isNull())) {
@@ -2921,7 +3089,7 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 						}
 						mdevice->internalSetResolutions(resolutions);
 					}
-					if (nodename == "dpms") {
+					else if (nodename == "dpms") {
 						TDEDisplayPowerLevel::TDEDisplayPowerLevel pl = TDEDisplayPowerLevel::On;
 						if (line == "On") {
 							pl = TDEDisplayPowerLevel::On;