diff options
Diffstat (limited to 'tdeprint/kmprinter.h')
| -rw-r--r-- | tdeprint/kmprinter.h | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/tdeprint/kmprinter.h b/tdeprint/kmprinter.h new file mode 100644 index 000000000..c6c2995e9 --- /dev/null +++ b/tdeprint/kmprinter.h @@ -0,0 +1,236 @@ +/* + * This file is part of the KDE libraries + * Copyright (c) 2001 Michael Goffioul <tdeprint@swing.be> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public + * License version 2 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + * + * You should have received a copy of the GNU Library General Public License + * along with this library; see the file COPYING.LIB. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + **/ + +#ifndef KMPRINTER_H +#define KMPRINTER_H + +#if !defined( _KDEPRINT_COMPILE ) && defined( __GNUC__ ) +#warning internal header, do not use except if you are a KDEPrint developer +#endif + +#include <tqstring.h> +#include <tqstringlist.h> +#include <tqptrlist.h> +#include <kurl.h> +#include <tqmap.h> +#include <tdeprint/kmobject.h> + +class KMDBEntry; +class DrMain; +class KPrinter; +class TQWidget; + +/** + * @internal + * This class is internal to KDEPrint and is not intended to be + * used outside it. Please do not make use of this header, except + * if you're a KDEPrint developer. The API might change in the + * future and binary compatibility might be broken. + */ +class KDEPRINT_EXPORT KMPrinter : public KMObject +{ +public: + enum PrinterType { + Printer = 0x01, + Class = 0x02, + Implicit = 0x04, + Virtual = 0x08, + Remote = 0x10, + Invalid = 0x20, + Special = 0x40 + }; + enum PrinterState { + Idle = 0x01, + Stopped = 0x02, + Processing = 0x03, + Unknown = 0x04, + Rejecting = 0x08, + StateMask = 0x07 + }; + enum PrinterCap { + CapBW = 0x0001, + CapColor = 0x0002, + CapDuplex = 0x0004, + CapStaple = 0x0008, + CapCopies = 0x0010, + CapCollate = 0x0020, + CapPunch = 0x0040, + CapCover = 0x0080, + CapBind = 0x0100, + CapSort = 0x0200, + CapSmall = 0x0400, + CapMedium = 0x0800, + CapLarge = 0x1000, + CapVariable = 0x2000 + }; + + // constructor functions + KMPrinter(); + KMPrinter(const KMPrinter& p); + ~KMPrinter(); + void copy(const KMPrinter& p); + + + // inline access functions + const TQString& name() const { return m_name; } + void setName(const TQString& s) { m_name = s; if (m_printername.isEmpty()) m_printername = s; } + const TQString& printerName() const { return m_printername; } + void setPrinterName(const TQString& s) { m_printername = s; if (m_name.isEmpty()) m_name = s; } + const TQString& instanceName() const { return m_instancename; } + void setInstanceName(const TQString& s) { m_instancename = s; } + int type() const { return m_type; } + void setType(int t) { m_type = t; } + void addType(int t) { m_type |= t; } + PrinterState state(bool complete = false) const { return PrinterState(m_state & (complete ? ~0x0 : StateMask)); } + TQString stateString() const; + void setState(PrinterState s) { m_state = PrinterState((m_state & ~StateMask) | s); } + bool acceptJobs() const { return !(m_state & Rejecting); } + void setAcceptJobs(bool on) { m_state = PrinterState((m_state & StateMask) | (on ? 0 : Rejecting)); } + const TQString& device() const { return m_device; } + TQString deviceProtocol() const; + void setDevice(const TQString& d) { m_device = d; } + const TQStringList& members() const { return m_members; } + void setMembers(const TQStringList& l) { m_members = l; } + void addMember(const TQString& s) { m_members.append(s); } + const TQString& description() const { return m_description; } + void setDescription(const TQString& s) { m_description = s; } + const TQString& location() const { return m_location; } + void setLocation(const TQString& s) { m_location = s; } + const KURL& uri() const { return m_uri; } + void setUri(const KURL& u) { m_uri = u; } + const TQString& manufacturer() const { return m_manufacturer; } + void setManufacturer(const TQString&s ) { m_manufacturer = s; } + const TQString& model() const { return m_model; } + void setModel(const TQString& s) { m_model = s; } + const TQString& driverInfo() const { return m_driverinfo; } + void setDriverInfo(const TQString& s) { m_driverinfo = s; } + int printerCap() const { return m_printercap; } + void setPrinterCap( int c ) { m_printercap = c; } + void addPrinterCap( int c ) { m_printercap |= c; } + + // some useful functions + bool isClass(bool useImplicit = true) const { return ((m_type & KMPrinter::Class) || (useImplicit && isImplicit())); } + bool isImplicit() const { return (m_type & KMPrinter::Implicit); } + bool isPrinter() const { return (m_type & KMPrinter::Printer); } + bool isRemote() const { return (m_type & KMPrinter::Remote); } + bool isLocal() const { return !isRemote(); } + bool isVirtual() const { return (m_type & KMPrinter::Virtual); } + bool isValid() const { return !(m_type & KMPrinter::Invalid); } + bool isSpecial() const { return (m_type & KMPrinter::Special); } + + // misc + KMDBEntry* dbEntry() const { return m_dbentry; } + void setDbEntry(KMDBEntry *e) { m_dbentry = e; } + TQString pixmap(); + void setPixmap(const TQString& s) { m_pixmap = s; } + bool isHardDefault() const { return m_harddefault; } + void setHardDefault(bool on) { m_harddefault = on; } + bool isSoftDefault() const { return m_softdefault; } + void setSoftDefault(bool on) { m_softdefault = on; } + bool ownSoftDefault() const { return m_ownsoftdefault; } + void setOwnSoftDefault(bool on) { m_ownsoftdefault = on; } + static int compare(KMPrinter *p1, KMPrinter *p2); + const TQString& option(const TQString& key) const { return m_options[key]; } + bool hasOption(const TQString& key) const { return m_options.contains(key); } + void setOption(const TQString& key, const TQString& value) { if (!key.isEmpty()) m_options[key] = value; } + void removeOption(const TQString& key) { m_options.remove(key); } + TQMap<TQString,TQString> options() const { return m_options; } + void setOptions(const TQMap<TQString,TQString>& opts) { m_options = opts; } + DrMain* driver() const { return m_driver; } + void setDriver(DrMain*); + DrMain* takeDriver(); + + // configure an existing KPrinter object + bool autoConfigure(KPrinter *prt, TQWidget *parent = 0); + + // default options + const TQString& defaultOption(const TQString& key) const { return m_defaultoptions[key]; } + void setDefaultOption(const TQString& key, const TQString& value) { if (!key.isEmpty()) m_defaultoptions[key] = value; } + TQMap<TQString,TQString> defaultOptions() const { return m_defaultoptions; } + void setDefaultOptions(const TQMap<TQString,TQString>& opts) { m_defaultoptions = opts; } + // edited options + const TQString& editedOption(const TQString& key) const { return m_editedoptions[key]; } + void setEditedOption(const TQString& key, const TQString& value) { if (!key.isEmpty()) m_editedoptions[key] = value; } + TQMap<TQString,TQString> editedOptions() const { return m_editedoptions; } + void setEditedOptions(const TQMap<TQString,TQString>& opts) { m_editedoptions = opts; } + // edited flag + bool isEdited() const { return m_isedited; } + void setEdited(bool on) { m_isedited = on; } + + +protected: + // mandantory information + TQString m_name; // identification name + TQString m_printername; // real printer name + TQString m_instancename; // instance name (human-readable) + int m_type; // printer type (any PrinterType flag OR-ed together) + PrinterState m_state; // printer state + /** + * Represent the device as a string, to provide native + * support for exotic devices. Conversion to URL is done + * only when really needed + */ + TQString m_device; // printer device + + // class specific information + TQStringList m_members; // members of the class + + // other useful information that should be completed by manager on demand + TQString m_description; // short description, comment + TQString m_location; // printer location + KURL m_uri; // URI printer identification + TQString m_manufacturer; // printer manufacturer (driver) + TQString m_model; // printer model (driver) + TQString m_driverinfo; // short driver info (ex: nick name in PPD) + + // DB driver entry (used when creating a printer). Internal use only !!! + KMDBEntry *m_dbentry; + DrMain *m_driver; + TQString m_pixmap; + + // default flags + bool m_harddefault; + bool m_softdefault; + bool m_ownsoftdefault; + + // other options (for any use) + TQMap<TQString,TQString> m_options; + + // options used for instances, and print library. These options are not + // overwritten when copying from another KMPrinter object. This allows to + // to keep the user settings through an application session. The difference + // between "default" and "edited" can be used for option saving (only save + // the options corresponding to current edited printer). + TQMap<TQString,TQString> m_defaultoptions; + TQMap<TQString,TQString> m_editedoptions; + bool m_isedited; + + // printer capabilities (based on CUPS model) + int m_printercap; +}; + +class KMPrinterList : public TQPtrList<KMPrinter> +{ +public: + KMPrinterList() : TQPtrList<KMPrinter>() {} + virtual int compareItems(TQPtrCollection::Item i1, TQPtrCollection::Item i2) + { return KMPrinter::compare((KMPrinter*)i1, (KMPrinter*)i2); } +}; + +#endif |