From 5159cd2beb2e87806a5b54e9991b7895285c9d3e Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sun, 27 Jan 2013 01:04:16 -0600 Subject: Rename a number of libraries and executables to avoid conflicts with KDE4 --- tdecore/DESIGN.tdeconfig | 224 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 224 insertions(+) create mode 100644 tdecore/DESIGN.tdeconfig (limited to 'tdecore/DESIGN.tdeconfig') diff --git a/tdecore/DESIGN.tdeconfig b/tdecore/DESIGN.tdeconfig new file mode 100644 index 000000000..a1fb48dbd --- /dev/null +++ b/tdecore/DESIGN.tdeconfig @@ -0,0 +1,224 @@ +tdeconfigdata.h contains definitions of the data formats used by tdeconfig. + +Configuration entries are stored as "KEntry". They are indexed with "KEntryKey". +The primary store is a "KEntryMap" which is defined as a QMap from "KEntryKey" +to "KEntry" + +KEntry's are stored in order in the KEntryMap. The most significant sort +criteria is mGroup. This means that all entries who belong in the same group, +are grouped in the QMap as well. + +The start of a group is indicated with a KEntryKey with an empty mKey and a +dummy KEntry. This allows us to search for the start of the group and then to +iterate until we end up in another group. That way we will find all entries +of a certain group. + +Entries that are localised with the _current_ locale are stored with bLocal +set to true. Entries that are localised with another locale are either not +stored at all (default), or with the localization as part of the key (when +reading a file in order to merge it). +[WABA: Does it make sense to keep both localized and non-localised around? +Can't we just let the localised version override the non-localised version?] + +Currently the localization bit is the least significant sort criteria, that +means that the localised version always follows the non-localised version +immediately. + + +Entries that are being read from a location other than the location to +which is written back are marked as "default" and will be added both as +normal entry as well as an entry with the key marked as default. + +When entries are written to disk, it is checked whether the entry to write +is equal to the default, if so the entry will not be written. The default +entry always follows directly after the normal entry, due to the sorting. +(After that the localised version follows) + +When entries are written to disk, it is checked whether the entry to write +is equal to the default, if so the entry will not be written. + + +Open question: +Should unmodified entries that are written back be compared with the default +too? This seems to be mostly a transition issue. + + +Extra functions: + +bool entryIsImmutable(key); // Can entry be modified? +bool hasDefault(key); // Is there a system wide default set for the entry? +void revertToDefault(key); // Restore to default +void deleteEntry(key); // Remove entry + +Note that there is a subtle difference between revertToDefault() and deleteEntry(). +revertToDefault() will change the entry to the default value set by the system +administrator (Via e.g. $TDEDIR/share/config) or, if no such default was set, +non-existant. +deleteEntry() will make the entry non-existant. + +Entries are marked "immutable" if the key is followed by [$i]. This means +that a user can not override these entries. + +Entries can be marked as deleted if they are followed by [$d]. This +is needed if the system administrator has specified a default value but the +entry was deleted (made 'non-existant'). In that case we can't just leave +the entry out since that would mean we get the default from the system +administrator back the next time we read the file. + + +When an entry is read with readEntry(key, defaultValue), non-existing +entries will return "defaultValue" while hasKey(key) will return "false" +for such entries. + +Currently all entries are stored in memory. When TDEConfig is "sync()'ed" +it reads the file that it is about to overwrite (for the second time), it +then merges in the entries it has in memory and writes the result back to +the file. It does NOT update its map of entries in memory with the entries +(re)read from disk. It only updates the entries in memory when +"reparseConfiguration()" is called. + + +Open Question: The standard writeEntry() function returns the original value, +is this needed? Nobody seems to use it. + +Open Question: The bPersistent flag doesn't seem to be used... could it be removed? + +Open Question: Is the bNLS flag needed? Localised entries seem to be mostly +useful for default files, are they ever created by the user itself? + +Open Question: Would it be worthwhile to lock a user option that is equal to the +default so that it doesn't change when the default changes? + + +KDE3.0 Changes +============== + +*) writeEntry now returns void instead of QString. +*) deleteEntry functions added + + +------------------------------------------------------------------------------ + +TDEConfig XT +========== + +My buzzword picker offered TDEConfig XT ("eXtended Technology") and TDEConfig NG +("Next Generation"). Since the planned changes are ment to be evolutionary +rather than revolutionary, TDEConfig NG was dropped. + +Goals +===== + +* Have the default value for config entries defined in 1 place. Currently it is +not uncommon to have them defined in three places: + 1) In the application that reads the setting in order to use it + 2) In the settings dialog when reading the setting + 3) In the settings dialog when selecting "Use defaults". + +* Provide type-information about config entries to facilate "KConfEdit" like +tools. Ideally type-information also includes range-information; this is even +mandatory if enums become an explicit type. + +* Facilitate the documentation of config entries. + + +Instead of relying on the defaults that are hard-coded in the application, +rely on default configuration files being installed in $TDEDIR. The technical +changes required for this are very minimal, it is mostly a change in policy. + +Type information can be provide by preceding every entry with a formalized +comment. + +Work to be done: +* TDEConfig needs to be extended to provide access to the default values provided +by the default config files. TDEConfig already stores this information internally. +(DONE) +* A formal comment structure needs to be designed that can convey type-information. +Preferably in such a way that it is easily parsable by both machine and user. +* TDEConfig needs to be extended, or another class created, that is able to parse +the formalized comments. +* A tool needs to be developed that can assist developers with the generation +and verification of default configuration files including type-information. + +Drawbacks: +* We rely on default configuration files being properly installed. +* The user can break applications by making improper modifications to these +files. +* It is not possible to store defaults settings in a config file that are +of a dynamic nature. Examples are settings derived from other settings, +e.g. a color setting could be derived from the current color theme, or +e.g. the default high score user name which is determined by the user +currently logged in. + + +Some random ideas: +* The format of the entries would be something like this: + +[Mail Settings] +#!Type=string +#!Description=SMTP server to use for sending mail +#!Description[nl]=SMTP server voor het versturen van mail +Host=wantelbos.zogje.fr + +- the type could be subclassed more, e.g. strings can be "email", "hostname", + "url", etc. + +- having translations in these files is very arguable. external po's would be + better. + + + +Class overview + + TDEConfigBase + | + v + TDEConfigBackend <-----> TDEConfig <------> TDEConfigSkeleton /--< myapp.kcfg + | | | / + v v |*---------------< +TDEConfigINIBackend KSimpleConfig |tdeconfig_compiler \ + | \--< myconfig.kcfg-codegen + v + MyConfig <-----TDEConfigDialogManager----> MyConfigWidget *---< myconfigwidget.ui + uic + +TDEConfigBase: defines API for generic config class + +TDEConfig: functional generic config class that supports merging of cascaded + configuration files + +KSimpleConfig: functional generic config class without support for cascading + configuration files. + +TDEConfigBackend: defines API for config backend, t.i. the actual handling + of the storage method and storage format. + +TDEConfigINIBackend: the standard (and only one so far) class that implements + the config backend using the file-based .INI format + for configuration files + +TDEConfigSkeleton: base class for deriving classes that store application + specific options providing type-safety and single-point + defaults. + +MyConfig: An application specific class that offers configuration options + to the applications via variables or accessor functions and that + handles type-safety and defaults. MyConfig is just an example + name, the application developer choses the actual name. + +myapp.kcfg: File describing the configuration options used by a specific + application. myapp.kcfg is just an example name, the application + developer choses the actual name. + +myconfig.kcfg-codegen: Implementation specific code generation instructions + for the MyConfig class. myconfig.kcfg-codegen is + just an example name, the application developer + choses the actual name. + +TDEConfigDialogManager: Class that links widgets in a dialog up with their + corresponding confguration options in a configuration + object derived from TDEConfigSkeleton. + +MyConfigWidget: Dialog generated from a .ui description file. Widget names + in the dialog that start with "kcfg_" refer to configuration + options. -- cgit v1.2.1