TQt4 port kdenetwork

This enables compilation under both Qt3 and Qt4


git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdenetwork@1237912 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

1 files changed, 38 insertions, 38 deletions

diff --git a/filesharing/advanced/nfs/hostprops.ui b/filesharing/advanced/nfs/hostprops.ui
index 4ff97e28..52a23e14 100644
--- a/filesharing/advanced/nfs/hostprops.ui
+++ b/filesharing/advanced/nfs/hostprops.ui
@@ -1,6 +1,6 @@
 <!DOCTYPE UI><UI version="3.2" stdsetdef="1">
 <class>HostProps</class>
-<widget class="QWidget">
+<widget class="TQWidget">
     <property name="name">
         <cstring>HostProps</cstring>
     </property>
@@ -22,7 +22,7 @@
         <property name="spacing">
             <number>6</number>
         </property>
-        <widget class="QGroupBox" row="0" column="0" rowspan="1" colspan="2">
+        <widget class="TQGroupBox" row="0" column="0" rowspan="1" colspan="2">
             <property name="name">
                 <cstring>propertiesGrp</cstring>
             </property>
@@ -34,7 +34,7 @@
                     <verstretch>0</verstretch>
                 </sizepolicy>
             </property>
-            <property name="minimumSize">
+            <property name="tqminimumSize">
                 <size>
                     <width>180</width>
                     <height>0</height>
@@ -59,7 +59,7 @@
                 <property name="spacing">
                     <number>6</number>
                 </property>
-                <widget class="QLabel">
+                <widget class="TQLabel">
                     <property name="name">
                         <cstring>TextLabel1</cstring>
                     </property>
@@ -70,7 +70,7 @@
                         <cstring>nameEdit</cstring>
                     </property>
                 </widget>
-                <widget class="QLineEdit">
+                <widget class="TQLineEdit">
                     <property name="name">
                         <cstring>nameEdit</cstring>
                     </property>
@@ -103,11 +103,11 @@ The host may be specified in a number of ways:
 
 &lt;i&gt;IP networks&lt;/i&gt;
 &lt;p&gt;
- You can also export directories to all hosts on an IP (sub-) network simultaneously. This is done by specifying an IP address and netmask pair as address/netmask where the netmask can be specified in dotted-decimal format, or as a contiguous mask length (for example, either `/255.255.252.0' or `/22' appended to the network base address result in identical subnetworks with 10 bits of host).
+ You can also export directories to all hosts on an IP (sub-) network simultaneously. This is done by specifying an IP address and nettqmask pair as address/nettqmask where the nettqmask can be specified in dotted-decimal format, or as a contiguous tqmask length (for example, either `/255.255.252.0' or `/22' appended to the network base address result in identical subnetworks with 10 bits of host).
 &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QCheckBox">
+                <widget class="TQCheckBox">
                     <property name="name">
                         <cstring>publicChk</cstring>
                     </property>
@@ -124,7 +124,7 @@ This is just the same as if you would enter a wildcard in the address field.
                 </widget>
             </vbox>
         </widget>
-        <widget class="QGroupBox" row="1" column="0">
+        <widget class="TQGroupBox" row="1" column="0">
             <property name="name">
                 <cstring>GroupBox7</cstring>
             </property>
@@ -149,7 +149,7 @@ This is just the same as if you would enter a wildcard in the address field.
                 <property name="spacing">
                     <number>6</number>
                 </property>
-                <widget class="QCheckBox" row="0" column="0">
+                <widget class="TQCheckBox" row="0" column="0">
                     <property name="name">
                         <cstring>readOnlyChk</cstring>
                     </property>
@@ -166,7 +166,7 @@ The default is to disallow any request which changes the filesystem
 &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QCheckBox" row="1" column="0">
+                <widget class="TQCheckBox" row="1" column="0">
                     <property name="name">
                         <cstring>secureChk</cstring>
                     </property>
@@ -183,7 +183,7 @@ If unsure leave it unchecked.
 &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QCheckBox" row="2" column="0">
+                <widget class="TQCheckBox" row="2" column="0">
                     <property name="name">
                         <cstring>syncChk</cstring>
                     </property>
@@ -200,7 +200,7 @@ The default is to allow the server to write the data out whenever it is ready.
 &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QCheckBox" row="3" column="0">
+                <widget class="TQCheckBox" row="3" column="0">
                     <property name="name">
                         <cstring>wdelayChk</cstring>
                     </property>
@@ -216,7 +216,7 @@ The default is to allow the server to write the data out whenever it is ready.
 This option only has effect if sync is also set. The NFS server will normally delay committing a write request to disk slightly if it suspects that another related write request may be in progress or may arrive soon. This allows multiple write requests to be committed to disk with the one operation which can improve performance. If an NFS server received mainly small unrelated requests, this behavior could actually reduce performance, so no wdelay is available to turn it off. &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QCheckBox" row="4" column="0">
+                <widget class="TQCheckBox" row="4" column="0">
                     <property name="name">
                         <cstring>hideChk</cstring>
                     </property>
@@ -226,13 +226,13 @@ This option only has effect if sync is also set. The NFS server will normally de
                     <property name="whatsThis" stdset="0">
                         <string>&lt;b&gt;No hide&lt;/b&gt;
 &lt;p&gt;
-This option is based on the option of the same name provided in IRIX NFS. Normally, if a server exports two filesystems one of which is mounted on the other, then the client will have to mount both filesystems explicitly to get access to them. If it just mounts the parent, it will see an empty directory at the place where the other filesystem is mounted. That filesystem is "hidden".
+This option is based on the option of the same name provided in IRIX NFS. Normally, if a server exports two filesystems one of which is mounted on the other, then the client will have to mount both filesystems explicitly to get access to them. If it just mounts the tqparent, it will see an empty directory at the place where the other filesystem is mounted. That filesystem is "hidden".
 &lt;/p&gt;
 &lt;p&gt;
-Setting the nohide option on a filesystem causes it not to be hidden, and an appropriately authorized client will be able to move from the parent to that filesystem without noticing the change.
+Setting the nohide option on a filesystem causes it not to be hidden, and an appropriately authorized client will be able to move from the tqparent to that filesystem without noticing the change.
 &lt;/p&gt;
 &lt;p&gt;
-However, some NFS clients do not cope well with this situation as, for instance, it is then possible for two files in the one apparent filesystem to have the same inode number.
+However, some NFS clients do not cope well with this situation as, for instance, it is then possible for two files in the one aptqparent filesystem to have the same inode number.
 &lt;/p&gt;
 &lt;p&gt;
 The nohide option is currently only effective on single host exports. It does not work reliably with netgroup, subnet, or wildcard exports.
@@ -242,7 +242,7 @@ This option can be very useful in some situations, but it should be used with du
 &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QCheckBox" row="5" column="0">
+                <widget class="TQCheckBox" row="5" column="0">
                     <property name="name">
                         <cstring>subtreeChk</cstring>
                     </property>
@@ -268,7 +268,7 @@ As a general guide, a home directory filesystem, which is normally exported at t
 &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QCheckBox" row="6" column="0">
+                <widget class="TQCheckBox" row="6" column="0">
                     <property name="name">
                         <cstring>secureLocksChk</cstring>
                     </property>
@@ -287,7 +287,7 @@ Early NFS client implementations did not send credentials with lock requests, an
                 </widget>
             </grid>
         </widget>
-        <widget class="QGroupBox" row="1" column="1">
+        <widget class="TQGroupBox" row="1" column="1">
             <property name="name">
                 <cstring>GroupBox3</cstring>
             </property>
@@ -302,7 +302,7 @@ Early NFS client implementations did not send credentials with lock requests, an
             <property name="title">
                 <string>User Mapping</string>
             </property>
-            <property name="alignment">
+            <property name="tqalignment">
                 <set>AlignAuto</set>
             </property>
             <vbox>
@@ -315,7 +315,7 @@ Early NFS client implementations did not send credentials with lock requests, an
                 <property name="spacing">
                     <number>6</number>
                 </property>
-                <widget class="QCheckBox">
+                <widget class="TQCheckBox">
                     <property name="name">
                         <cstring>allSquashChk</cstring>
                     </property>
@@ -328,7 +328,7 @@ Early NFS client implementations did not send credentials with lock requests, an
 Map all uids and gids to the anonymous user. Useful for NFS-exported public FTP directories, news spool directories, etc. &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QCheckBox">
+                <widget class="TQCheckBox">
                     <property name="name">
                         <cstring>rootSquashChk</cstring>
                     </property>
@@ -346,15 +346,15 @@ Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does not ap
 &lt;/p&gt;</string>
                     </property>
                 </widget>
-                <widget class="QLayoutWidget">
+                <widget class="TQLayoutWidget">
                     <property name="name">
-                        <cstring>layout15</cstring>
+                        <cstring>tqlayout15</cstring>
                     </property>
                     <hbox>
                         <property name="name">
                             <cstring>unnamed</cstring>
                         </property>
-                        <widget class="QLabel">
+                        <widget class="TQLabel">
                             <property name="name">
                                 <cstring>TextLabel1_2</cstring>
                             </property>
@@ -368,7 +368,7 @@ Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does not ap
                                 <string>&lt;b&gt;Anonym. UID/GID&lt;/b&gt; &lt;p&gt; These options explicitly set the uid and gid of the anonymous account. This option is primarily useful for PC/NFS clients, where you might want all requests appear to be from one user. &lt;/p&gt;</string>
                             </property>
                         </widget>
-                        <widget class="QLineEdit">
+                        <widget class="TQLineEdit">
                             <property name="name">
                                 <cstring>anonuidEdit</cstring>
                             </property>
@@ -380,7 +380,7 @@ Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does not ap
                                     <verstretch>0</verstretch>
                                 </sizepolicy>
                             </property>
-                            <property name="minimumSize">
+                            <property name="tqminimumSize">
                                 <size>
                                     <width>50</width>
                                     <height>0</height>
@@ -392,15 +392,15 @@ Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does not ap
                         </widget>
                     </hbox>
                 </widget>
-                <widget class="QLayoutWidget">
+                <widget class="TQLayoutWidget">
                     <property name="name">
-                        <cstring>layout16</cstring>
+                        <cstring>tqlayout16</cstring>
                     </property>
                     <hbox>
                         <property name="name">
                             <cstring>unnamed</cstring>
                         </property>
-                        <widget class="QLabel">
+                        <widget class="TQLabel">
                             <property name="name">
                                 <cstring>TextLabel2</cstring>
                             </property>
@@ -414,7 +414,7 @@ Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does not ap
                                 <string>&lt;b&gt;Anonym. UID/GID&lt;/b&gt; &lt;p&gt; These options explicitly set the uid and gid of the anonymous account. This option is primarily useful for PC/NFS clients, where you might want all requests appear to be from one user. &lt;/p&gt;</string>
                             </property>
                         </widget>
-                        <widget class="QLineEdit">
+                        <widget class="TQLineEdit">
                             <property name="name">
                                 <cstring>anongidEdit</cstring>
                             </property>
@@ -426,7 +426,7 @@ Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does not ap
                                     <verstretch>0</verstretch>
                                 </sizepolicy>
                             </property>
-                            <property name="minimumSize">
+                            <property name="tqminimumSize">
                                 <size>
                                     <width>50</width>
                                     <height>0</height>
@@ -450,7 +450,7 @@ Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does not ap
             <property name="sizeType">
                 <enum>Expanding</enum>
             </property>
-            <property name="sizeHint">
+            <property name="tqsizeHint">
                 <size>
                     <width>20</width>
                     <height>16</height>
@@ -548,11 +548,11 @@ Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does not ap
 <includes>
     <include location="local" impldecl="in implementation">hostprops.ui.h</include>
 </includes>
-<signals>
+<Q_SIGNALS>
     <signal>modified()</signal>
-</signals>
-<slots>
+</Q_SIGNALS>
+<Q_SLOTS>
     <slot>setModified()</slot>
-</slots>
-<layoutdefaults spacing="6" margin="11"/>
+</Q_SLOTS>
+<tqlayoutdefaults spacing="6" margin="11"/>
 </UI>