summaryrefslogtreecommitdiffstats
path: root/doc/knode/using-morefeatures.docbook
diff options
context:
space:
mode:
Diffstat (limited to 'doc/knode/using-morefeatures.docbook')
-rw-r--r--doc/knode/using-morefeatures.docbook855
1 files changed, 855 insertions, 0 deletions
diff --git a/doc/knode/using-morefeatures.docbook b/doc/knode/using-morefeatures.docbook
new file mode 100644
index 000000000..39892bf60
--- /dev/null
+++ b/doc/knode/using-morefeatures.docbook
@@ -0,0 +1,855 @@
+<sect1 id="more-knode-features">
+<title>The Advanced &knode; Features</title>
+
+<sect2 id="using-filters">
+<title>Defining and Using Filters</title>
+
+<para>You may already have read about using filters in the chapter explaining
+the configuration of &knode;; there, we were talking about the built-in
+filters provided by &knode; there. You can configure the built-in
+filters like all the others. The screenshot below shows the dialog box for
+configuring the filters.</para>
+
+<tip><para>While filters and scoring are very powerful and have many
+uses, one of the most common requirements is simply to add all posts
+written by someone you don't wish to read to a
+<quote>killfile</quote>. At the <link linkend="killfiles">end of this
+section</link> is a quick guide to using filters and scores to create
+such a killfile.</para></tip>
+
+<screenshot>
+<screeninfo>The <guilabel>New Filter</guilabel> dialog</screeninfo>
+<mediaobject>
+<imageobject>
+<imagedata fileref="knode-edit-filter.png" format="PNG"/> </imageobject>
+<textobject>
+<phrase>The <guilabel>New Filter</guilabel> dialog</phrase>
+</textobject>
+<caption>
+<para>The <guilabel>New Filter</guilabel> dialog</para>
+</caption>
+</mediaobject>
+</screenshot>
+
+<para>First we will create a new filter. You may, at some point, want
+to find your own articles amongst all the others; or, you may not
+want to see the articles posted by a particular person at all: both cases can
+be solved by a simple filter on the Sender. Here are some
+examples:</para>
+
+<procedure>
+<title>Do Not Show The Articles by a Particular Person</title>
+<step performance="required" >
+<para><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
+KNode...</guimenuitem><guilabel>Reading
+News</guilabel><guilabel>Filters</guilabel></menuchoice></para>
+</step>
+<step performance="required">
+<para>Select <guibutton>New...</guibutton></para>
+</step>
+<step performance="required">
+<para>Insert <userinput>Do not show idiot</userinput> in the Text Box
+<guilabel>Name</guilabel></para>
+</step>
+<step performance="required">
+<para>To make the filter appear on the menu, check <guilabel>Show
+in menu</guilabel>.</para>
+</step>
+<step performance="required">
+<para>Go to the <guilabel>From</guilabel> area.</para>
+</step>
+<step performance="required">
+<para>Choose <guilabel>Does NOT contain</guilabel> from the drop-down
+box.</para>
+</step>
+<step performance="required">
+<para>Insert the name of the person you want to ignore in the now-
+active Text Box; for example, <userinput>Idiot</userinput>.</para>
+</step>
+<step performance="required">
+<para>Confirm the filter settings with
+<guibutton>OK</guibutton>.</para>
+</step>
+</procedure>
+
+<para>The filter now shows all articles, except the ones containing
+<quote>Idiot</quote> in the From: line.</para>
+
+<para>You can combine the settings of the 'Subject + From' tab
+with the settings on the other tabs. For example:</para>
+
+<procedure>
+<title>Show only discussion with unread follow-ups on own
+articles.</title>
+<step>
+<para><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
+KNode...</guimenuitem><guilabel>Reading
+News</guilabel><guilabel>Filters</guilabel></menuchoice></para>
+</step>
+<step>
+<para>Select the predefined filter <guilabel>threads with own
+articles</guilabel></para>
+</step>
+<step>
+<para>Select <guibutton>Copy</guibutton></para>
+</step>
+<step>
+<para>Insert <userinput>My threads with unread</userinput> in the
+<guilabel>Name</guilabel> field.</para>
+</step>
+<step>
+<para>Select the <guilabel>Status</guilabel> tab</para>
+</step>
+<step>
+<para>Select <guilabel>has new followups</guilabel></para>
+</step>
+<step>
+<para>Select <guilabel>true</guilabel> in the drop-down box next to
+it.</para>
+</step>
+<step>
+<para>Confirm the filter settings with
+<guibutton>OK</guibutton></para>
+<para>This filter shows all the threads your are participating in which
+have unread messages; also, you have seen the possibility of using
+existing filters as a base for new ones: this makes life easier for
+complex filters.</para>
+</step>
+</procedure>
+
+<procedure>
+<title>Show all articles, no older than 3 days, containing KNode in
+the subject.</title>
+<step>
+<para><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
+KNode...</guimenuitem><guilabel>Reading
+News</guilabel><guilabel>Filters</guilabel></menuchoice></para>
+</step>
+<step>
+<para>Select <guibutton>Add</guibutton></para>
+</step>
+<step>
+<para>Insert <userinput>Latest KNode threads</userinput> in the
+<guilabel>Name</guilabel> field.</para>
+</step>
+<step>
+<para>To make the filter appear in the menu, check <guilabel>show
+in menu</guilabel>.</para>
+</step>
+<step>
+<para>From the <guilabel>apply on</guilabel> drop-down box select
+<guilabel>single articles</guilabel></para>
+</step>
+<step>
+<para>Go to the <guilabel>Subject</guilabel> area and select
+<guilabel>does contain</guilabel> in the drop-down box.</para>
+</step>
+<step>
+<para>Insert <userinput>knode</userinput> in the text box.</para>
+</step>
+<step>
+<para>Change to the <guilabel>Additional</guilabel> tab</para>
+</step>
+<step>
+<para>Select the <guilabel>Age</guilabel> check box</para>
+</step>
+<step>
+<para>Enter the following settings: <guilabel>0 &lt; days &lt;=
+3</guilabel></para>
+</step>
+<step>
+<para>Confirm the filter settings with
+<guibutton>OK</guibutton></para>
+<para>This filter, now, shows all articles, no older than 3 days,
+containing <emphasis>knode</emphasis> in the subject.</para>
+</step>
+</procedure>
+
+<sect3 id="killfiles">
+<title>Creating a Killfile</title>
+
+<para>&knode; offers viewing filters (<guilabel>all</guilabel>,
+<guilabel>unread only</guilabel>, <guilabel>my posts</guilabel>,
+&etc;) and scoring filters (threads and articles start with a score of
+zero and can be adjusted according to author, thread, &etc;).</para>
+
+<para>Using viewing filters you could hide articles according to
+poster, but this is not really suitable when you want to kill several
+posters universally.</para>
+
+<para>Using the scoring gives lots of control but filters
+only at the thread level, i.e. you can watch and ignore threads; the
+disadvantage of this, however, is that you may lose otherwise-useful
+threads just because of one poster.</para>
+
+<para>The solution is to use these in combination.</para>
+
+<procedure>
+<title>Creating a Killfile</title>
+<step>
+<para>Go to
+<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
+KNode</guimenuitem><guilabel>Reading
+News</guilabel><guilabel>Filters</guilabel></menuchoice>.</para>
+</step>
+
+<step>
+<para>Create a new filter below <guilabel>unread</guilabel>, called
+<userinput>killfile on</userinput>. Be sure that <guilabel>Apply to single
+articles</guilabel> is set and then click on the
+<guilabel>Additional</guilabel> tab. Set score <quote>equal to or less than
+zero</quote> (<guilabel>&lt;=</guilabel>); then click the
+<guibutton>OK</guibutton> until you have exited the dialog.</para>
+</step>
+
+<step>
+<para>Open an article whose author should be killed and just type
+<keycombo action="simul">&Ctrl;<keycap>L</keycap></keycombo>(or
+select, from the <guimenu>Scoring</guimenu> menu, <guimenuitem>Lower Score
+for Author</guimenuitem>). This opens the Rule Editor (a part of
+scoring). You can optionally give the rule a name that matches the
+author (<userinput>Kook</userinput>, for example.) and then, if this is
+to be permanent, uncheck the <guilabel>expire automatically</guilabel>
+box; you'll see that this rule will change the author's score to minus
+ten (or the score you entered); finally, click <guibutton>OK</guibutton>.</para>
+</step>
+
+<step>
+<para>Go to the menu item
+<menuchoice><guimenu>View</guimenu><guisubmenu>Filter</guisubmenu><guimenuitem>killfile on.</guimenuitem>
+</menuchoice></para>
+</step>
+</procedure>
+
+<para>This will cause any articles with scores less than zero will
+disappear; to kill additional authors you only need repeat the
+<keycombo action="simul">&Ctrl;<keycap>L</keycap></keycombo> part of
+these instructions.</para>
+
+</sect3>
+
+</sect2>
+
+<sect2 id="knode-editor-advanced">
+<title>The Composer</title>
+<anchor id="anc-knode-editor-advanced"/>
+
+<para>The &knode; composer provides many features, especially for
+posting and replying to articles.</para>
+
+<sect3>
+<title>Publish Articles in Multiple Newsgroups</title>
+
+<para>By selecting the Button <guilabel>Browse</guilabel> you can
+choose additional newsgroups you want to publish your article
+in.</para>
+
+<caution>
+<para>It is generally undesirable to post articles in multiple
+newsgroups: please think twice about it; if you are not sure where to
+post your article ask in one of the possible groups &mdash; somebody will
+tell you were to post.</para>
+</caution>
+</sect3>
+
+<sect3>
+<title>Redirect Followups</title>
+
+<para>The main use of this feature is when a thread has gone
+off topic for the newsgroup in which it is posted; for example, a thread may
+start in a &kde; newsgroup discussing how to redirect a followup in &knode;,
+but may leads to a dicussion about graphical and text based
+newsreaders.</para>
+
+<para>Sometimes it happens that usenet users post an article into the
+wrong newsgroup; very often those articles are just ignored. If it
+looks like the author did this unintentionally, you might like to tell
+them politely and make the followup articles go into the right
+group.</para>
+
+<para>Another reason for using <guilabel>Followup-To:</guilabel> is a
+when dealing with articles cross-posted across in multiple newsgroups:
+you should take care that the replies are only posted in one single newsgroup.</para>
+
+<para>You can activate this by filling the text box
+<guilabel>Followups - To:</guilabel>; here you can enter the suitable
+group. If there are multiple newsgroups in the
+<guilabel>Groups:</guilabel> field, they are shown in the drop-down
+list.</para>
+
+<tip>
+<para>If you enter <userinput>poster</userinput> here, instead of a
+newsgroup, the replies will go directly to the author, not to the
+newsgroup.</para>
+
+<para>Some people put an email address here, but this is not a valid
+entry: use <userinput>poster</userinput> and correctly set your
+Reply-To address in the normal &knode; settings.</para>
+
+</tip>
+
+</sect3>
+
+<sect3>
+<title>Working With an External Editor</title>
+
+<para>Using <menuchoice><guimenu>Tools</guimenu><guimenuitem>Start
+External Editor</guimenuitem></menuchoice> you can start an editor of
+your choice for editing the reply; this way you can use your preferred
+Editor for writing articles and e-mails.</para>
+
+</sect3>
+
+<sect3>
+<title>Spelling</title>
+
+<para>By selecting
+<menuchoice><guimenu>Tools</guimenu><guimenuitem>Spelling</guimenuitem></menuchoice>,
+you can check the article in the composer for spelling errors.</para>
+
+</sect3>
+
+<sect3>
+<title>Sending Attachments</title>
+
+<para>By selecting
+<menuchoice><guimenu>Attach</guimenu><guimenuitem>Attach
+File</guimenuitem></menuchoice> you can open the File Selection Dialog
+Box; here you can choose the file you want to attach.</para>
+
+<para>Most of the time, &knode; determines the correct
+<acronym>MIME</acronym> type for the attachment; if &knode; detects
+it incorrectly, you can correct the <acronym>MIME</acronym> type manually.</para>
+
+<para>This screenshot shows the Composer with 2 attachments: a text
+file and a PNG picture.</para>
+
+<screenshot>
+<screeninfo>Sending Attachments</screeninfo>
+<mediaobject>
+<imageobject>
+<imagedata fileref="knode-composer-attachments.png" format="PNG"/> </imageobject>
+<textobject>
+<phrase>Sending Attachments</phrase>
+</textobject>
+<caption>
+<para>Sending Attachments</para>
+</caption>
+</mediaobject>
+</screenshot>
+
+<caution>
+<para>Only do this if you know what you're doing! An incorrect
+<acronym>MIME</acronym> type could cause the attachment to be sent
+incorrectly, or mean that the attachment will not be able to be
+rebuilt after sending.</para>
+</caution>
+
+<tip>
+<para>The English word attachment is used all over the world; you can
+use it in your language, too.</para>
+</tip>
+
+<important>
+<para>In most newsgroups, attachments are prohibited: do not send
+unsolicited attachments; if you are asked to send them, look who is
+asking for them &mdash; normally, the person will want you to send them by
+email.</para>
+
+<para>The news server will probably reject articles with attachments
+for most groups anyway; those that do accept attachments
+normally have the word <quote>binaries</quote> in their name. Some
+news servers even stop carrying non-binaries newsgroups that
+continuously receive attachments.</para>
+</important>
+</sect3>
+</sect2>
+
+<sect2>
+<title>Searching for Articles</title>
+
+<para>Sooner or later, you will want to search for one specific
+article; the &knode; search feature is an easy way to do this.</para>
+
+<para>You can reach the search function by selecting
+<menuchoice><guimenu>Edit</guimenu><guimenuitem>Search
+Articles...</guimenuitem></menuchoice> or the by pressing
+<keycap>F4</keycap>. The screenshot below shows the Search Dialog Box.</para>
+
+<screenshot>
+<screeninfo>The Search Dialog Box</screeninfo>
+<mediaobject>
+<imageobject>
+<imagedata fileref="knode-search.png" format="PNG"/> </imageobject>
+<textobject>
+<phrase>The Search Dialog Box</phrase>
+</textobject>
+<caption>
+<para>The Search Dialog Box</para>
+</caption>
+</mediaobject>
+</screenshot>
+
+<para>The Search Dialog Box has four tabs which allow several search
+criteria: the first tab contains the settings for the
+<guilabel>Subject</guilabel> and <guilabel>From</guilabel> criteria; the second
+tab contains the settings for the <guilabel>message-IDs</guilabel> of
+an article and its references; the third tab contains the settings for
+the <guilabel>Status</guilabel> of an
+article; the fourth tab, <guilabel>Additional</guilabel>, contains the remaining
+criteria.</para>
+
+<para>You have probably already noticed the similarities between the Filter
+Dialog Box and the Search Dialog Box: the usage is the same and should
+not be too complicated if you have already defined your own
+filters.</para>
+
+<para>&knode; always searches in the currently-active newsgroup; a
+search in all newsgroups is not possible at the moment. After the
+Search has finished the articles found appear in the article view; when
+you close the Search Dialog Box using <guibutton>Close</guibutton>
+the search results are deleted, and the old view of the newsgroup
+appears again.</para>
+
+<sect3>
+<title><guilabel>Start Search</guilabel></title>
+
+<para>With this button you start the Search with the search criteria
+you defined; all articles in the selected newsgroup, fulfiling these
+criteria, appear in the article view.</para>
+
+</sect3>
+
+<sect3>
+<title><guilabel>New Search</guilabel></title>
+
+<para>This button resets all search criteria.</para>
+
+</sect3>
+</sect2>
+
+<sect2 id="supersede-and-cancel">
+<title>Supersede and Cancel Articles</title>
+
+<para>This chapter deals with superseding and canceling articles. You
+will not use these two features very often, but they do exist should
+you, one day, need them.</para>
+
+<caution>
+<para>Both functions need a news server prepared to handle
+them; you should also remember that there is no guarantee that no one has
+already read your article before it is superseded or canceled.
+</para>
+
+<para>So first think, then post.</para>
+</caution>
+
+<sect3>
+<title>Cancel</title>
+
+<para>Canceling an article means deleting it from the
+newsgroup.</para>
+
+<para>Why should you want to cancel an article? Perhaps you
+flamed somebody in a rage and now you want to get this article out of
+the newsgroup because you regret what you wrote: a personal insult,
+read by everybody, doesn't look good, especially when you regret
+it; so, there is only one thing you can do &mdash; cancel the article.</para>
+
+<para>Select the article you want to cancel and choose
+<guimenuitem>Cancel article</guimenuitem> from its context menu. If
+you are sure it is the right article, confirm &knode;s question with
+<guibutton>Yes</guibutton>. Now you will be asked if you want to send the
+Cancel message now or later; for this example we decide to send it
+<guibutton>Later</guibutton>. You will notice the new message in the
+folder <guilabel>Outbox</guilabel>.</para>
+
+<para>Now we want to look at the so-called cancel message. In the
+subject you will find something like:</para>
+
+<screen>
+<computeroutput>cancel of &lt;n177m8.1m.ln@konqui.org&gt;</computeroutput>
+</screen>
+
+<para>This strange letters between the brackets are the Message-ID of
+the article you want to cancel. This message tells the newsserver to
+delete your article: if you look at complete header of this message,
+by selecting <menuchoice><guimenu>View</guimenu><guimenuitem>Show all
+headers</guimenuitem></menuchoice>, you will notice a line with the
+name <emphasis>control</emphasis> and the content <emphasis>cancel
+&lt;xxxxx@ddddd.dd&gt;</emphasis> &mdash; this line tells the server that
+this message is a control message and, in our case, tells the server to
+cancel your article.</para>
+
+<para>You can still delete the control message from the
+<guilabel>Outbox</guilabel> should you change your mind.</para>
+
+<caution>
+<para>Keep in mind that articles can only be identified by their
+Message-IDs; you need this Message-ID if you want to cancel an
+article. Normally, your article gets a Message-ID when it arrives at
+the newsserver &mdash; that's why you can only cancel an article once
+it has been published. The articles in the
+<guilabel>Sent</guilabel> folder have no Message-ID, so you cannot cancel
+them from there.</para>
+
+<para>There is one exception: if you have configured &knode; to
+generate a Message-ID you can cancel you articles in folder
+<guilabel>Sent</guilabel> too.</para>
+
+<para>&knode; allows only to cancel your own articles: it refuses to
+cancel articles from other authors.</para>
+</caution>
+
+<warning>
+<para>Since the cancel feature is so easily fooled, by newsreaders
+that let you cancel any post, many news servers do not acknowledge
+cancel messages from posters; even if your own <acronym>ISP</acronym>
+accepts the cancel and passes it on, many other servers will ignore it
+<emphasis>and will not pass it on</emphasis>.</para>
+
+<para>You should consider any previously-sent article, canceled or
+not, to be published and publicly available.</para>
+</warning>
+
+</sect3>
+
+<sect3>
+<title>Supersede</title>
+
+<para>Supersede overwrites your article with a new version. One reason
+for doing this could be:</para>
+
+<para>You have written a long article and have already posted it; now, you
+have found an error in this article: you could cancel this article, and post a
+new, corrected, article; or, you can use Supersede.</para>
+
+<para>Select the article in the article view. From its context menu
+select <guimenuitem>Supersede article...</guimenuitem>. &knode; will
+ask you if you really want to overwrite this article; if you confirm with
+<guibutton>Yes</guibutton> the Composer appears.</para>
+
+<para>In the Composer you can now make the desired corrections and
+changes. You can then publish this article in the same way as you post
+every other article; when the newsserver receives this article it
+reads some special lines in the header which tell the newsserver to
+supersede the older article. Select
+<menuchoice><guimenu>File</guimenu><guimenuitem>Send
+Later</guimenuitem></menuchoice> for now, because we want to look at
+the article's header in the <guilabel>Outbox</guilabel>.</para>
+
+<para>Activate <menuchoice><guimenu>View</guimenu><guimenuitem>Show
+all headers</guimenuitem></menuchoice>, because we want to see all the
+headers the newsserver receives. You will notice a line like:</para>
+
+<para>Supersedes: &lt;oggcm8.4n5.ln@konqi.org&gt;</para>
+
+<para>This is the instruction for the newsserver for superseding the
+article with the Message-ID &lt;oggcm8.4n5.ln@konqi.org&gt; with the
+new article.</para>
+
+<para>Besides this, Supersede is used for periodical posted articles, &eg;
+ an <acronym>FAQ</acronym>. The new article supersedes the old one and
+ the newsgroups do not end up with lots of different versions.</para>
+
+<caution>
+<para>Again, using this function is only possible if the article
+already has a Message-ID. Normally, articles get their Message-ID from the
+newsserver: this means that you can only supersede articles which have
+already been published.</para>
+
+<para>You can configure &knode; to generate this Message-ID, then you can
+supersede your articles in the folder <guilabel>Sent</guilabel>,
+too.</para>
+
+<para>&knode; allows you to only supersede your own articles.</para>
+
+</caution>
+
+<warning>
+<para>As with cancels, supersede messages have been abused in the
+past, with, for example, certain parties sending hundreds or even
+thousands of them to overwrite legitimate posts with random computer
+generated junk; again, as with cancels, many news servers do not
+honor supersede messages, nor do they pass them on.</para>
+</warning>
+
+</sect3>
+</sect2>
+
+<sect2 id="score-watch-ignore">
+<title>Score, watch, ignore</title>
+
+<anchor id="anc-score-watch-ignore"/>
+<para>Score, Watch and Ignore are different names for the same
+feature.</para>
+
+<para>By scoring a thread, you determine its importance. &knode;
+allows scores between -100000 and 100000. A normal article will get a
+score of 0 if you do not change this; threads with a score below 0
+are less important than average; threads with a score above 0 are more
+important than average.</para>
+
+<para>The score is an attribute of the thread and the articles in this
+thread, so you can use the score for filtering and searching
+articles; for example, you can define a filter to show only
+articles with a score &gt; 0, i.e. all articles in which you are
+specifically interested.</para>
+
+<para>The function <guilabel>Watch</guilabel> sets the score of
+all article in a thread to 100; this way they get a high score and &knode;
+labels them with a special icon.</para>
+
+<para>The function <guilabel>Ignore</guilabel> does the
+opposite: it scores all articles in a thread with -100 so &knode;
+does not show these articles anymore.</para>
+
+<tip>
+<para>The English word <quote>scoring</quote> is used in many other
+countries, too.</para>
+</tip>
+
+<para>You can score an article or a thread manually with the right
+mouse button or with the <guimenu>Scoring</guimenu> menu &mdash; here you can
+score with <guilabel>Watch Thread</guilabel> and <guilabel>Ignore
+Thread</guilabel> directly. Apart from scoring manually you can let &knode;
+score the articles with scoring rules automatically; you can configure these
+rules at <menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
+KNode...</guimenuitem><guimenuitem>Reading
+News</guimenuitem><guimenuitem>Scoring</guimenuitem></menuchoice> or
+at <menuchoice><guimenu>Scoring</guimenu><guimenuitem>Edit scoring
+rules...</guimenuitem></menuchoice> &mdash; the only difference between these
+dialogs is that the last one has the rule-list next to the rule
+configuration. In the following guide I'm using the editor that appears
+if <menuchoice><guimenu>Scoring</guimenu><guimenuitem>Edit scoring
+rules...</guimenuitem></menuchoice> is chosen.</para>
+
+<screenshot>
+<screeninfo>The Rule Editor</screeninfo>
+<mediaobject>
+<imageobject>
+<imagedata fileref="knode-rule-editor.png" format="PNG"/> </imageobject>
+<textobject>
+<phrase>The Rule Editor</phrase>
+</textobject>
+<caption>
+<para>The Rule Editor</para>
+</caption>
+</mediaobject>
+</screenshot>
+
+<para>The composer consists of 4 areas: on the left side is the list
+of the rules; with the buttons below the list you can add, delete or
+copy an existing rule; below that you have the possibility to limit
+the rules which are shown &mdash; you have the choice whether to show all
+rules or only the rules for a specific <glossterm>newsgroup</glossterm>.</para>
+
+<para>If you chose a rule-name in the list you the rule will be displayed
+on the right-hand side; now you can edit the rule. At the top you can change
+the name of the rule and set the newsgroups to which this rule applies.
+You can choose one or
+more than one group, note that group names must be separated by a
+semicolon. You can choose from the subscribed groups with
+the drop-down list and the <guibutton>Add group</guibutton> button; or
+you can use regular expressions and wild cards, &eg; <quote>.*</quote> for all
+groups. The <guilabel>Expire rule automatically</guilabel> option
+makes it possible to delete the rule automatically after the
+configured number of days; this is useful if a specific person
+behaves badly and you do not want to read anything from this person for a
+few days.</para>
+
+<para>In the <guilabel>Condition</guilabel> field you enter the
+condition on which this rule is activated. Normally, you can enter only
+one condition, but you can change this by pressing the
+<guibutton>More</guibutton> and <guibutton>Fewer</guibutton> buttons. If you
+have more than one condition, you must tell knode whether all conditions
+need to be fulfilled or only one of them; this can be done by choosing
+<guilabel>Match all conditions</guilabel> or
+<guilabel>Match any condition</guilabel> respectively.
+</para>
+
+<para>Each condition consists of 2 drop-down lists and a text
+field. In the first list you chose the part of the message which should
+be used for the condition &mdash; this part will be compared with the text
+field; the second drop-down list tells &knode; how it is to be
+compared, for example, whether the chosen header should be identical
+to the text entered in the text field, or if it just needs to match part of it.
+Regular expressions are allowed, too.
+If you check <guilabel>Not</guilabel> then the conditions under which
+the condition is satisfied are reversed, and the condition will be satisfied
+if the opposite of its shown conditions is true.</para>
+
+<para>Now, let's have a look at some
+examples.</para>
+
+<itemizedlist>
+<listitem>
+<para>Maybe you want to filter away all the postings by Theodor
+Test; to do this choose the
+<guilabel>From</guilabel> header line from the first drop-down
+list, choose <guilabel>is exactly the same as</guilabel> from the second
+drop-down list, and enter his name in the text field.
+But, before doing this you should have a
+look at the <glossterm>header</glossterm> of one of Theodor's
+articles and see what is in the <quote>From</quote> line.</para>
+</listitem>
+<listitem>
+<para>If you do not want to read articles with more than 100 lines, choose
+the header entry <guilabel>Lines</guilabel> from the first drop-down
+list, choose <guilabel>greater than</guilabel> from the second, and enter
+<userinput>100</userinput> in the text field. You probably, then, want to
+score down the message.</para>
+</listitem>
+<listitem>
+<para>Last example: of course, you're very interested in every article
+that refers to &knode;. Choose the header entry
+<guilabel>Subject</guilabel>, then <guilabel>contains substring</guilabel>
+and enter <userinput>knode</userinput> in the text field. But what do
+you do if &knode; is not mentioned in the
+<guilabel>Subject</guilabel>? I suggest using a regular
+expression: change <guilabel>contains substring</guilabel> to
+<guilabel>matches regular expression</guilabel> and type
+<userinput>knode|newsreader|usenet</userinput> into the text
+field to match either knode, newsreader or usenet &mdash; the <userinput>|</userinput> symbol
+means OR. Alternatively, you can make 3 conditions &mdash; one that matches knode,
+one that matches newsreader and so on &mdash; and choose
+<guilabel>Match any condition</guilabel>; but, this needs a lot of
+space and it is not very elegant, is it?</para>
+</listitem>
+
+</itemizedlist>
+
+<para>Once your condition is ready you should set an action down in the
+<guilabel>Actions</guilabel> section. The most important action is
+<guilabel>adjust score</guilabel>; if this action is chosen you can
+raise or lower the score, by the configured value, for articles to which
+this rule applies. &knode; can also show you a little message when finding
+such an article or colorize the header in the article list; for example, you could make
+interesting articles scraeming pink so you would notice them very
+quickly.</para>
+
+<para>When leaving the editor, or when the
+<menuchoice><guimenu>Scoring</guimenu><guimenuitem>Recalculate
+scores</guimenuitem></menuchoice> menu item is chosen, the rules are executed; furthermore,
+the rules are automatically used for new
+<glossterm>articles</glossterm>. Scoring makes the most sense when
+used with filters: by scoring some articles down and filtering them away
+they won't appear in the article list.</para>
+
+</sect2>
+
+<sect2 id="group-identity">
+<title>Group identities</title>
+
+<para>With &knode; you can use a different identity with every
+newsgroup to which you are subscribed; i.e. you can set a name, email address,
+reply-to address and signature to use with that group.</para>
+
+<para>It is easy to set group identities. First, with the right mouse button,
+click on the name of the newsgroup in which to have a different identity in; then,
+select <guimenuitem>Group Properties</guimenuitem> from the context menu
+that appears. In the dialog that appears the second tab contains
+fields identical to the global identity settings; enter your settings here and
+click <guibutton>OK</guibutton> to confirm the changes: then, your articles in
+this group will always posted with this newly-entered identity.</para>
+
+<caution>
+<para>When you unsubscribe from a group you lose its identity
+settings for this group: if you re-subscribe to the group, you will need to
+re-enter its identity settings. For new newsgroups, the global identity is
+used.</para>
+</caution>
+
+</sect2>
+
+<sect2 id="multiple-news-accounts">
+<title>Managing Multiple News Accounts</title>
+
+<para>&knode; can handle an unlimited number of news server accounts in
+addition to your main news server; most users don't need this feature,
+but it can be very useful to if your main newsserver does not provide
+all groups you want to read. Typical cases of this are when support groups for
+commercial software are hosted on a special, private, server or binary
+newsgroups, which are only available from some servers.</para>
+
+<para>Another example of why you sometimes need more than one newsserver
+is that sometimes not all interesting newsgroups are on one
+server; in fact, there is very often only a selection of
+newsgroups. For example, many servers do not support binary
+groups with pictures or programs; if you want such a newsgroup and
+your newsserver provider does not want to serve it you can configure
+&knode; to get it from another server.</para>
+
+<para>Or, perhaps you find you are just subscribed to too many
+newsgroups, and would like to organize them a little better; you
+could set up several accounts for the same server, perhaps one for
+groups you read every day, and one for groups you read less often, so
+that you do not have to search for your <quote>everyday</quote> groups
+in a long list of subscribed groups.</para>
+
+<para>In order to add an new account, open the preferences
+dialog via
+<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
+KNode...</guimenuitem><guilabel>Accounts</guilabel><guilabel>News</guilabel>
+</menuchoice>. The <guibutton>New</guibutton> button creates a new
+account; you then have to enter the same data as for your first
+account, typically a name for the account, the host name, and a user name
+and password if the server requires authentication. When
+this is done the new server will appear both in the configuration
+dialog and in the group view: you can now subscribe to
+newsgroups.</para>
+
+<para>You can delete the currently-selected account by pressing the
+<guibutton>Delete</guibutton> button.</para>
+
+<tip>
+<para>In the <guimenu>Account properties</guimenu> dialog (available
+from the context menu of the newsserver) you can setup an identity for use
+only on this newsserver.</para>
+</tip>
+</sect2>
+
+<sect2 id="PGP-support">
+<title>Sign and Verify Articles with <acronym>PGP</acronym></title>
+<anchor id="anc-PGP-support"/>
+
+<para><acronym>PGP</acronym> is the most-widespread method used to encrypt or
+sign data. Using the <glossterm>PGP-signature</glossterm> you can
+verify if an article is really from the original author or if it has been
+changed by others. You can find PGP-programs and guides at <ulink
+url="http://www.pgpi.org">http://www.pgpi.org</ulink>.</para>
+
+<para>With &knode; you can sign an article with
+<acronym>PGP</acronym> and to verify <acronym>PGP</acronym>-signed
+article. After you have configured the <acronym>PGP</acronym> support,
+at <menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
+Knode...</guimenuitem><guilabel>Signing/Verifying</guilabel></menuchoice>,
+you can sign articles in the editor with the
+<menuchoice><guimenu>Tools</guimenu><guimenuitem>Sign article with
+PGP</guimenuitem></menuchoice> menu item &mdash; you will be asked for your passphrase
+and after that the article will be signed.</para>
+
+<caution>
+<para>Your <application>GnuPG</application>/<acronym>PGP</acronym>
+<acronym>ID</acronym> is automatically built from your name and your
+email address and is identical to the sender of the message
+(<quote>From</quote>-header).</para>
+</caution>
+
+<para> To verify
+a <glossterm>PGP-signature</glossterm> you have to choose the menu
+item <menuchoice><guimenu>View</guimenu><guimenuitem>Verify
+PGP-signature</guimenuitem></menuchoice>.</para>
+</sect2>
+
+</sect1>
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+sgml-minimize-attributes: nil
+sgml-general-insert-case: lower
+sgml-parent-document:("index.docbook" "chapter" "sect1")
+End:
+-->