DwPopClient -- Class for handling the client side of a POP session
class DW_EXPORT DwPopClient : public DwProtocolClient {
public:
enum {
kCmdNoCommand=0,
kCmdUser,
kCmdPass,
kCmdQuit,
kCmdStat,
kCmdList,
kCmdRetr,
kCmdDele,
kCmdNoop,
kCmdRset,
kCmdApop,
kCmdTop,
kCmdUidl
};
DwPopClient();
virtual ~DwPopClient();
virtual int Open(const char* aServer, DwUint16 aPort=110);
DwObserver* SetObserver(DwObserver* aObserver);
int StatusCode() const;
const DwString& SingleLineResponse() const;
const DwString& MultiLineResponse() const;
int User(const char* aName);
int Pass(const char* aPasswd);
int Quit();
int Stat();
int List();
int List(int aMsg);
int Retr(int aMsg);
int Dele(int aMsg);
int Noop();
int Rset();
int Apop(const char* aName, const char* aDigest);
int Top(int aMsg, int aNumLines);
int Uidl();
int Uidl(int aMsg);
};
DwPopClient is a class that handles the client side of a POP session. Specifically, DwPopClient provides facilities for opening a connection to a POP server, sending commands to the server, receiving responses from the server, and closing the connection. The protocol implemented is the Post Office Protocol version 3, as specified in RFC-1939.
DwPopClient is derived from DwProtocolClient. For information about inherited member functions, especially member functions for detecting failures or errors, see the man page for DwProtocolClient.
In a POP session, the client sends commands to the server and receives responses from the server. A client command consists of a command word and zero or more argument words. A server response consists of a single line status response, which may be followed immediately by a multi-line response. The first word of the status response is either +OK or -ERR, indicating the success or failure of the command. The status line may also contain other information requested by the client.
DwPopClient has only a default constructor. On Win32 platforms, it is possible for the constructor to fail. (It calls WSAStartup().) You should verify that the constructor succeeded by calling the inherited member function DwProtocolClient::LastError() and checking for a zero return value.
To open a connection to the server, call the member function Open() with the name of the server as an argument. Open() accepts an optional argument that specifies the TCP port that the server listens to. The default port is the standard POP port (110). Open() may fail, so you should check the return value to verify that it succeeded. To close the connection, call the inherited member function DwProtocolClient::Close(). To check if a connection is open, call the inherited member function DwProtocolClient::IsOpen(). IsOpen() returns a boolean value that indicates whether or not a call to Open() was successful; it will not detect failure in the network or a close operation by the remote host.
For each POP command, DwPopClient has a member function that sends that command and receives the server's response. If the command takes any arguments, then those arguments are passed as function arguments to the command function. The command functions return the first character of the server's response, which will be '+' if the command succeeded or '-' if the command failed. In some cases, because of a communications error or some other error, it is not possible for the command function to send the command or receive the response. When this happens, the command function will return 0. You can determine the precise error or failure by calling the inherited member functions DwProtocolClient::LastError() or DwProtocolClient::LastFailure().
After each command is sent, DwPopClient receives the server's response and remembers it. The member function StatusCode() returns the first character of the server's status response; it will be '+' or '-', indicating success or failure, or zero if no response was received from the server. SingleLineResponse() returns the entire single line status response from the server, including the initial "+OK" or "-ERR" status word.
The server sends a single-line response, including a status code, for all POP commands. For some commands, such as when the client requests a mail message, the server sends a multi-line text response immediately following the single-line status response. Multi-line text responses can be received in either of two ways. The simplest way is to call the member function MultiLineResponse() after a command completes successfully. This simple method works fine for non-interactive applications. It can be a problem in interactive applications, however, because there is no data to display to a user until the entire multi-line response is retrieved. An alternative method allows your program to retrieve the multi-line response one line at a time as it is received. To use this method, you must define a subclass of DwObserver and assign an object of that class to the DwPopClient object using the member function SetObserver(). DwObserver is an abstract class, declared in protocol.h, that has just one pure virtual member function Notify(). After each line of the multi-line response is received, DwPopClient will call the Notify() member function of its assigned DwObserver object. Each invocation of Notify() should call the DwPopClient member function MultiLineResponse() to retrieve the next line of the text response. Note that you cannot use both of these methods at the same time: if an observer is assigned, MultiLineResponse() returns only the last line received, not the entire multi-line response.
Initializes the DwPopClient object. It is possible for the constructor to fail. To verify that the constructor succeeded, call the member function LastError() and check that it returns zero. (In the Win32 implementation, the constructor calls the Winsock function WSAStartup(), which may fail.)
virtual int Open(const char* aServer, DwUint16 aPort=110)
Opens a TCP connection to the server aServer at port aPort. aServer may be either a host name, such as "news.acme.com" or an IP number in dotted decimal format, such as "147.81.64.60". The default value for aPort is 110, the well-known port for POP3 assigned by the Internet Assigned Numbers Authority (IANA).
If the connection attempt succeeds, the server sends a response. Open() returns the server's status code ('+' or '-'). The full response from the server can be retrieved by calling SingleLineResponse().
If the connection attempt fails, Open() returns 0. To determine what error occurred when a connection attempt fails, call the inherited member function DwProtocolClient::LastError(). To determine if a failure also occurred, call the inherited member function DwProtocolClient::LastFailure().
DwObserver* SetObserver(DwObserver* aObserver)
Sets the observer object that interacts with the DwPopClient object to retrieve a multi-line response. If an observer is set, DwPopClient will call the observer's Notify() method after each line of the multi-line response is received. To remove an observer, call SetObserver() with a NULL argument. SetObserver() returns the previously set observer, or NULL if no observer was previously set.
int StatusCode() const
Returns the status code received from the server in response to the last client command. The status codes in POP3 are '+', indicating success, and '-', indicating failure. If no response was received, StatusCode() returns zero.
const DwString& SingleLineResponse() const
Returns the single line status response last received from the server. If no response was received, perhaps because of a communications failure, SingleLineResponse() returns an empty string.
const DwString& MultiLineResponse() const
If no observer is set for this object, MultiLineResponse() returns a string that comprises the entire sequence of lines received from the server. Otherwise, if an observer is set for this object, MultiLineResponse() returns only the most recent line received.
int User(const char* aName)
Sends the USER command and returns the status code received from the server. If no response is received, the function returns zero. aName is the name of the user, which is sent in the command.
int Pass(const char* aPasswd)
Sends the PASS command and returns the status code received from the server. If no response is received, the function returns zero. aPasswd is the password, which is sent in the command.
int Quit()
Sends the QUIT command and returns the status code received from the server. If no response is received, the function returns zero.
int Stat()
Sends the STAT command and returns the status code received from the server. If no response is received, the function returns zero.
int List()
int List(int aMsg)
Sends the LIST command, with or without a message number, and returns the status code received from the server. If no response is received, the function returns zero.
int Retr(int aMsg)
Sends the RETR command and returns the status code received from the server. If no response is received, the function returns zero. aMsg is the message number, which is sent in the command.
int Dele(int aMsg)
Sends the DELE command and returns the status code received from the server. If no response is received, the function returns zero. aMsg is the message number, which is sent in the command.
int Noop()
Sends the NOOP command and returns the status code received from the server. If no response is received, the function returns zero.
int Rset()
Sends the RSET command and returns the status code received from the server. If no response is received, the function returns zero.
int Apop(const char* aName, const char* aDigest)
Sends the APOP command and returns the status code received from the server. If no response is received, the function returns zero. aName is the name of the user, which is sent in the command. aDigest is the digest argument for the command.
int Top(int aMsg, int aNumLines)
Sends the TOP command and returns the status code received from the server. If no response is received, the function returns zero. aMsg is the message number. aNumLines is the number of lines to send.
int Uidl()
int Uidl(int aMsg)
Sends the TOP command, with or without a message number, and returns the status code received from the server. If no response is received, the function returns zero.