Convert remaining references to kde3 (e.g. in paths) to trinity

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdevelop@1248408 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

3 files changed, 32 insertions, 32 deletions

diff --git a/doc/kdevelop/applicationwizard.docbook b/doc/kdevelop/applicationwizard.docbook
index 9ffea830..6370cb12 100644
--- a/doc/kdevelop/applicationwizard.docbook
+++ b/doc/kdevelop/applicationwizard.docbook
@@ -598,7 +598,7 @@ When any information of all these is wrong &kdevelop; usually will not know abou
 <screen><computeroutput>
 * cd '/home/devel/test' &amp;&amp; cvs -d '/home/devel/mycvsroot' \
   import -m 'new project' '' 'vendor' 'start' &amp;&amp;\
-  sh /opt/kde3/share/apps/kdevcvs/buildcvs.sh . '' \
+  sh /opt/trinity/share/apps/kdevcvs/buildcvs.sh . '' \
   '/home/devel/mycvsroot'
 * cvs [import aborted]: /home/devel/mycvsroot/CVSROOT: No such file or
   directory
diff --git a/doc/kdevelop/kdevelop-install.docbook b/doc/kdevelop/kdevelop-install.docbook
index 1ff5982c..028f5e10 100644
--- a/doc/kdevelop/kdevelop-install.docbook
+++ b/doc/kdevelop/kdevelop-install.docbook
@@ -73,7 +73,7 @@ To obtain an initial version of &kdevelop; you must download it from anonymous s
 </para>
 
 <note><para>
-We assume you want to put your &kdevelop; copy into the <filename class="directory">kde3src</filename> subdirectory of your home directory (<filename class="directory">~</filename>).
+We assume you want to put your &kdevelop; copy into the <filename class="directory">trinitysrc</filename> subdirectory of your home directory (<filename class="directory">~</filename>).
 </para></note>
 
 <informalexample><simplelist>
@@ -82,18 +82,18 @@ We assume you want to put your &kdevelop; copy into the <filename class="directo
   </member>
   <member>
     <prompt>~&gt; </prompt>
-    <userinput>mkdir kde3src</userinput>
+    <userinput>mkdir trinitysrc</userinput>
   </member>
   <member>
     <prompt>~&gt; </prompt>
-    <userinput>cd kde3src</userinput>
+    <userinput>cd trinitysrc</userinput>
   </member>
   <member>
-    <prompt>~/kde3src&gt; </prompt>
+    <prompt>~/trinitysrc&gt; </prompt>
     <userinput>svn co svn://anonsvn.kde.org/home/kde/branches/KDE/3.5/kdevelop</userinput>
   </member>
   <member>
-    <prompt>~/kde3src&gt; </prompt>
+    <prompt>~/trinitysrc&gt; </prompt>
     <userinput>cd kdevelop</userinput>
   </member>
 </simplelist></informalexample>
@@ -123,7 +123,7 @@ Now you may compile your &kdevelop; version as shown in the <link linkend="compi
   <tertiary>update</tertiary></indexterm>
 
 <para>
-After you checked out (and successfully compiled) &kdevelop; from svn as shown above, you'll want to keep it up to date in order to get all the patches. Follow these steps. (We again assume you have put your &kdevelop; copy into the <filename class="directory">kde3src</filename> directory.)
+After you checked out (and successfully compiled) &kdevelop; from svn as shown above, you'll want to keep it up to date in order to get all the patches. Follow these steps. (We again assume you have put your &kdevelop; copy into the <filename class="directory">trinitysrc</filename> directory.)
 </para>
 <para>
 Note the <command>up</command> (= <emphasis>update</emphasis>) command instead of the <command>co</command> (which stands for <emphasis>checkout</emphasis>).
@@ -132,14 +132,14 @@ Note the <command>up</command> (= <emphasis>update</emphasis>) command instead o
 <informalexample><simplelist>
   <member>
     <prompt>~&gt; </prompt>
-    <userinput>cd kde3src</userinput>
+    <userinput>cd trinitysrc</userinput>
   </member>
   <member>
-    <prompt>~/kde3src&gt; </prompt>
+    <prompt>~/trinitysrc&gt; </prompt>
     <userinput>cd kdevelop</userinput>
   </member>
   <member>
-    <prompt>~/kde3src&gt; </prompt>
+    <prompt>~/trinitysrc&gt; </prompt>
     <userinput>svn up</userinput>
   </member>
 </simplelist></informalexample>
@@ -436,7 +436,7 @@ If you use the tcsh shell add the following lines:
   <secondary>&kdevelop;</secondary></indexterm>
 
 <note><para>
-In the following discussion we assume that you have put your &kdevelop; sources in the <filename class="directory">~/kde3src/kdevelop</filename> directory.
+In the following discussion we assume that you have put your &kdevelop; sources in the <filename class="directory">~/trinitysrc/kdevelop</filename> directory.
 </para></note>
 
 <sect3 id="compile-and-install-make-svn">
@@ -455,7 +455,7 @@ You must <emphasis>initialize the make system</emphasis> after a fresh checkout.
 </para>
 
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>make -f admin/Makefile.common svn-clean</userinput>
 </member></simplelist></informalexample>
 <para>
@@ -484,7 +484,7 @@ U /some_directory_path/Makefile.am
 or if you just did a full checkout, you must enter:
 </para>
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>make -f Makefile.svn</userinput>
 </member></simplelist></informalexample>
 <para>
@@ -515,8 +515,8 @@ If you want to keep track of what your &kdevelop; application does at run-time y
 </para>
 
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
-  <userinput>./configure --enable-debug=full --prefix=</userinput>(where-your-kde3-is)
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+  <userinput>./configure --enable-debug=full --prefix=</userinput>(where-your-trinity-is)
 </member></simplelist></informalexample>
 </listitem>
 </varlistentry>
@@ -529,8 +529,8 @@ running) release version suffices. <command>configure</command> defaults to
 this.</para>
 
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
-  <userinput>./configure --prefix=</userinput>(where-your-kde3-is)
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+  <userinput>./configure --prefix=</userinput>(where-your-trinity-is)
 </member></simplelist></informalexample>
 
 <note>
@@ -538,7 +538,7 @@ this.</para>
 If you want to build your own <link linkend="make-api">API documentation</link> for &kdevelop; you must include yet another option in the <command>configure</command> command:
 </para>
 <informalexample><simplelist>
-  <member><prompt>~/kde3src/kdevelop&gt; </prompt>
+  <member><prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>./configure --</userinput>(options-as-above) <userinput>\</userinput></member> <member><userinput>--with-kdelibsdoxy-dir=$KDEDIR/share/doc/HTML/en/kdelibs-apidocs</userinput></member>
 </simplelist></informalexample>
 </note>
@@ -553,21 +553,21 @@ If you want to build your own <link linkend="make-api">API documentation</link>
 </para>
 
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>make</userinput>
 </member></simplelist></informalexample>
 <para>
 suffices. If necessary, now gain root user rights using the command
 </para>
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>su</userinput>
 </member></simplelist></informalexample>
 <para>
 and entering the root password. Then install the application:
 </para>
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>make install</userinput>
 </member></simplelist></informalexample>
 <para>
@@ -614,8 +614,8 @@ That's all. If you installed &kdevelop; in the default &kde; directory you may n
 By default <command>configure</command> prepares the IDE to be installed in the default &kde; directory. This is necessary because &kdevelop; assumes direct access to some tools and parts which reside there. If want to use your own installation directory, you must tell <command>configure</command> this by the <option>--prefix</option> option:
 </para>
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
-  <userinput>./configure --prefix=</userinput>(where-your-kde3-is)
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
+  <userinput>./configure --prefix=</userinput>(where-your-trinity-is)
 </member></simplelist></informalexample>
 <para>
 There is a caveat if you do so. You must provide a means for &kdevelop; to access the needed tools and parts in the &kde; directory when running. (You can still use the IDE without doing so, but with very restrained capabilities.)
@@ -631,7 +631,7 @@ Call up a shell and have the following commands executed before you start &kdeve
 <informalexample><simplelist>
   <member>
     <prompt>~&gt; </prompt>
-    <userinput>export KDEDIRS=/usr/local/kde:/opt/kde3</userinput>
+    <userinput>export KDEDIRS=/usr/local/kde:/opt/trinity</userinput>
   </member>
   <member>
     <prompt>~&gt; </prompt>
@@ -648,9 +648,9 @@ Call up a shell and have the following commands executed before you start &kdeve
 
 <note><simplelist>
   <member>The <envar>KDEDIRS</envar> environment variable must be set to the <emphasis>list of active &kde; directories</emphasis> in your system. We use</member>
-  <member><filename class="directory">/usr/local/kde</filename>:<filename class="directory">/opt/kde3</filename></member>
+  <member><filename class="directory">/usr/local/kde</filename>:<filename class="directory">/opt/trinity</filename></member>
   <member>as an example only.</member>
-  <member>The <filename class="directory">/usr/local/kde</filename> directory may for instance contain an incomplete &kde; version you compiled for debug purposes, and the <filename class="directory">/opt/kde3</filename> directory may in addition contain the standard &kde; version from your distribution that is used for everyday work.</member>
+  <member>The <filename class="directory">/usr/local/kde</filename> directory may for instance contain an incomplete &kde; version you compiled for debug purposes, and the <filename class="directory">/opt/trinity</filename> directory may in addition contain the standard &kde; version from your distribution that is used for everyday work.</member>
 </simplelist></note>
 
 <para>
@@ -658,7 +658,7 @@ In a tcsh shell you must set the environment variables using:
 </para>
 <informalexample><simplelist><member>
     <prompt>~&gt; </prompt>
-    <userinput>setenv KDEDIRS /usr/local/kde:/opt/kde3</userinput>
+    <userinput>setenv KDEDIRS /usr/local/kde:/opt/trinity</userinput>
 </member></simplelist></informalexample>
 <para>
 The <command>kbuildsycoca</command> command (<quote>build system control cache</quote>) looks around for libraries and caches their location and version, so that &kdevelop; can find them. The caveat is that it takes noticeable time&mdash;and it has to be run any time you call up the shell to start &kdevelop; from a non-default directory. You may want to put the above commands into a shell script to reduce the typing effort.
@@ -707,7 +707,7 @@ Alas, this version is best used read-only over the internet. If you do not alway
 
 <informalexample><simplelist>
   <member>
-    <prompt>~/kde3src/kdevelop&gt; </prompt>
+    <prompt>~/trinitysrc/kdevelop&gt; </prompt>
     <userinput>./configure --</userinput>(options-as-usual)<userinput> \</userinput>
   </member>
   <member>
@@ -719,7 +719,7 @@ Alas, this version is best used read-only over the internet. If you do not alway
 (<command>make</command> will replace the global <varname>$KDEDIR</varname> variable with the actual &kde; directory setting recorded therein.) Then issue a <command>make</command> command <link linkend="compile-and-install-make-basic">as usual</link>. After the &kdevelop; IDE has been built you have the option to build the API as well. For this you must issue
 </para>
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>make apidocs</userinput>
 </member></simplelist></informalexample>
 
@@ -728,7 +728,7 @@ This will build a <filename>Doxyfile</filename> in your &kdevelop; base director
 </para>
 
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>su</userinput>
 </member></simplelist></informalexample>
 
@@ -737,7 +737,7 @@ and entering the root password. Then install the API files:
 </para>
 
 <informalexample><simplelist><member>
-  <prompt>~/kde3src/kdevelop&gt; </prompt>
+  <prompt>~/trinitysrc/kdevelop&gt; </prompt>
   <userinput>make install-apidox</userinput>
 </member></simplelist></informalexample>
 
diff --git a/doc/kdevelop/project-management.docbook b/doc/kdevelop/project-management.docbook
index 38a3ff8d..eb0aebce 100644
--- a/doc/kdevelop/project-management.docbook
+++ b/doc/kdevelop/project-management.docbook
@@ -639,7 +639,7 @@ CXX = @CXX@
 </programlisting>
 
 <programlisting>
-prefix = /home/bernd/kde3
+prefix = /home/bernd/trinity
 INSTALL = /usr/bin/ginstall -c -p
 build_triplet = i686-pc-linux-gnu
 CXX = g++