From ab257225f82696202bf13962be1926f7bbdad243 Mon Sep 17 00:00:00 2001 From: tpearson Date: Sun, 21 Aug 2011 01:43:11 +0000 Subject: Convert remaining references to kde3 (e.g. in paths) to trinity git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdevelop@1248408 283d02a7-25f6-0310-bc7c-ecb5cbfe19da --- doc/kde_app_devel/index.docbook | 26 +++++++------- doc/kdevelop/applicationwizard.docbook | 2 +- doc/kdevelop/kdevelop-install.docbook | 60 ++++++++++++++++----------------- doc/kdevelop/project-management.docbook | 2 +- 4 files changed, 45 insertions(+), 45 deletions(-) (limited to 'doc') diff --git a/doc/kde_app_devel/index.docbook b/doc/kde_app_devel/index.docbook index 5b721135..2ec1f0e4 100644 --- a/doc/kde_app_devel/index.docbook +++ b/doc/kde_app_devel/index.docbook @@ -722,7 +722,7 @@ the compilation phase. 9 gmake[3]: Leaving directory `/home/caleb/kscribble/doc' 10 Making all in en 11 gmake[3]: Entering directory `/home/caleb/kscribble/doc/en' -12 /usr/local/kde3/bin/meinproc --check --cache index.cache.bz2 /home/caleb/kscribble/doc/en/index.docbook +12 /usr/local/trinity/bin/meinproc --check --cache index.cache.bz2 /home/caleb/kscribble/doc/en/index.docbook 13 gmake[3]: Leaving directory `/home/caleb/kscribble/doc/en' 14 gmake[2]: Leaving directory `/home/caleb/kscribble/doc' 15 Making all in po @@ -734,7 +734,7 @@ the compilation phase. 21 source='main.cpp' object='main.o' libtool=no \ 22 depfile='.deps/main.Po' tmpdepfile='.deps/main.TPo' \ 23 depmode=gcc3 /bin/sh /home/caleb/kscribble/admin/depcomp \ -24 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/kde3/include +24 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/trinity/include -I/usr/lib/qt/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new @@ -743,7 +743,7 @@ the compilation phase. 26 source='kscribble.cpp' object='kscribble.o' libtool=no \ 27 depfile='.deps/kscribble.Po' tmpdepfile='.deps/kscribble.TPo' \ 28 depmode=gcc3 /bin/sh /home/caleb/kscribble/admin/depcomp \ -29 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/kde3/include +29 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/trinity/include -I/usr/lib/qt/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new @@ -754,7 +754,7 @@ the compilation phase. 33 source='kscribbleview.cpp' object='kscribbleview.o' libtool=no \ 34 depfile='.deps/kscribbleview.Po' tmpdepfile='.deps/kscribbleview.TPo' \ 35 depmode=gcc3 /bin/sh /home/caleb/kscribble/admin/depcomp \ -36 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/kde3/include +36 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/trinity/include -I/usr/lib/qt/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new -c @@ -768,18 +768,18 @@ the compilation phase. 43 source='pref.cpp' object='pref.o' libtool=no \ 44 depfile='.deps/pref.Po' tmpdepfile='.deps/pref.TPo' \ 45 depmode=gcc3 /bin/sh /home/caleb/kscribble/admin/depcomp \ -46 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/kde3/include +46 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/trinity/include -I/usr/lib/qt/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new -c -o pref.o `test -f 'pref.cpp' || echo '/home/caleb/kscribble/src/'`pref.cpp -47 /usr/local/kde3/bin/dcopidl /home/caleb/kscribble/src/kscribbleiface.h > kscribbleiface.kidl || +47 /usr/local/trinity/bin/dcopidl /home/caleb/kscribble/src/kscribbleiface.h > kscribbleiface.kidl || ( rm -f kscribbleiface.kidl ; /bin/false ) -48 /usr/local/kde3/bin/dcopidl2cpp --c++-suffix cpp --no-signals --no-stub kscribbleiface.kidl +48 /usr/local/trinity/bin/dcopidl2cpp --c++-suffix cpp --no-signals --no-stub kscribbleiface.kidl 49 source='kscribbleiface_skel.cpp' object='kscribbleiface_skel.o' libtool=no \ 50 depfile='.deps/kscribbleiface_skel.Po' tmpdepfile='.deps/kscribbleiface_skel.TPo' \ 51 depmode=gcc3 /bin/sh /home/caleb/kscribble/admin/depcomp \ -52 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/kde3/include +52 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/trinity/include -I/usr/lib/qt/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new @@ -788,12 +788,12 @@ the compilation phase. 53 /bin/sh ../libtool --silent --mode=link --tag=CXX g++ -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new -o kscribble -R - /usr/local/kde3/lib -R /usr/lib/qt/lib -R /usr/X11R6/lib -L/usr/X11R6/lib -L/usr/lib/qt/lib - -L/usr/local/kde3/lib main.o kscribble.o kscribbleview.o pref.o kscribbleiface_skel.o -lkio + /usr/local/trinity/lib -R /usr/lib/qt/lib -R /usr/X11R6/lib -L/usr/X11R6/lib -L/usr/lib/qt/lib + -L/usr/local/trinity/lib main.o kscribble.o kscribbleview.o pref.o kscribbleiface_skel.o -lkio 54 source='kscribble_client.cpp' object='kscribble_client.o' libtool=no \ 55 depfile='.deps/kscribble_client.Po' tmpdepfile='.deps/kscribble_client.TPo' \ 56 depmode=gcc3 /bin/sh /home/caleb/kscribble/admin/depcomp \ -57 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/kde3/include +57 g++ -DHAVE_CONFIG_H -I. -I/home/caleb/kscribble/src -I.. -I/usr/local/trinity/include -I/usr/lib/qt/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new @@ -802,8 +802,8 @@ the compilation phase. 58 /bin/sh ../libtool --silent --mode=link --tag=CXX g++ -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new -o kscribble_client -R - /usr/local/kde3/lib -R /usr/lib/qt/lib -R /usr/X11R6/lib -L/usr/X11R6/lib -L/usr/lib/qt/lib - -L/usr/local/kde3/lib kscribble_client.o -lkdecore + /usr/local/trinity/lib -R /usr/lib/qt/lib -R /usr/X11R6/lib -L/usr/X11R6/lib -L/usr/lib/qt/lib + -L/usr/local/trinity/lib kscribble_client.o -lkdecore 59 gmake[2]: Leaving directory `/home/caleb/kscribble/src' 60 gmake[2]: Entering directory `/home/caleb/kscribble' 61 gmake[2]: Nothing to be done for `all-am'. diff --git a/doc/kdevelop/applicationwizard.docbook b/doc/kdevelop/applicationwizard.docbook index 9ffea830..6370cb12 100644 --- a/doc/kdevelop/applicationwizard.docbook +++ b/doc/kdevelop/applicationwizard.docbook @@ -598,7 +598,7 @@ When any information of all these is wrong &kdevelop; usually will not know abou * cd '/home/devel/test' && cvs -d '/home/devel/mycvsroot' \ import -m 'new project' '' 'vendor' 'start' &&\ - sh /opt/kde3/share/apps/kdevcvs/buildcvs.sh . '' \ + sh /opt/trinity/share/apps/kdevcvs/buildcvs.sh . '' \ '/home/devel/mycvsroot' * cvs [import aborted]: /home/devel/mycvsroot/CVSROOT: No such file or directory diff --git a/doc/kdevelop/kdevelop-install.docbook b/doc/kdevelop/kdevelop-install.docbook index 1ff5982c..028f5e10 100644 --- a/doc/kdevelop/kdevelop-install.docbook +++ b/doc/kdevelop/kdevelop-install.docbook @@ -73,7 +73,7 @@ To obtain an initial version of &kdevelop; you must download it from anonymous s -We assume you want to put your &kdevelop; copy into the kde3src subdirectory of your home directory (~). +We assume you want to put your &kdevelop; copy into the trinitysrc subdirectory of your home directory (~). @@ -82,18 +82,18 @@ We assume you want to put your &kdevelop; copy into the update -After you checked out (and successfully compiled) &kdevelop; from svn as shown above, you'll want to keep it up to date in order to get all the patches. Follow these steps. (We again assume you have put your &kdevelop; copy into the kde3src directory.) +After you checked out (and successfully compiled) &kdevelop; from svn as shown above, you'll want to keep it up to date in order to get all the patches. Follow these steps. (We again assume you have put your &kdevelop; copy into the trinitysrc directory.) Note the up (= update) command instead of the co (which stands for checkout). @@ -132,14 +132,14 @@ Note the up (= update) command instead o ~> - cd kde3src + cd trinitysrc - ~/kde3src> + ~/trinitysrc> cd kdevelop - ~/kde3src> + ~/trinitysrc> svn up @@ -436,7 +436,7 @@ If you use the tcsh shell add the following lines: &kdevelop; -In the following discussion we assume that you have put your &kdevelop; sources in the ~/kde3src/kdevelop directory. +In the following discussion we assume that you have put your &kdevelop; sources in the ~/trinitysrc/kdevelop directory. @@ -455,7 +455,7 @@ You must initialize the make system after a fresh checkout. - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> make -f admin/Makefile.common svn-clean @@ -484,7 +484,7 @@ U /some_directory_path/Makefile.am or if you just did a full checkout, you must enter: - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> make -f Makefile.svn @@ -515,8 +515,8 @@ If you want to keep track of what your &kdevelop; application does at run-time y - ~/kde3src/kdevelop> - ./configure --enable-debug=full --prefix=(where-your-kde3-is) + ~/trinitysrc/kdevelop> + ./configure --enable-debug=full --prefix=(where-your-trinity-is) @@ -529,8 +529,8 @@ running) release version suffices. configure defaults to this. - ~/kde3src/kdevelop> - ./configure --prefix=(where-your-kde3-is) + ~/trinitysrc/kdevelop> + ./configure --prefix=(where-your-trinity-is) @@ -538,7 +538,7 @@ this. If you want to build your own API documentation for &kdevelop; you must include yet another option in the configure command: - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> ./configure --(options-as-above) \ --with-kdelibsdoxy-dir=$KDEDIR/share/doc/HTML/en/kdelibs-apidocs @@ -553,21 +553,21 @@ If you want to build your own API documentation - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> make suffices. If necessary, now gain root user rights using the command - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> su and entering the root password. Then install the application: - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> make install @@ -614,8 +614,8 @@ That's all. If you installed &kdevelop; in the default &kde; directory you may n By default configure prepares the IDE to be installed in the default &kde; directory. This is necessary because &kdevelop; assumes direct access to some tools and parts which reside there. If want to use your own installation directory, you must tell configure this by the option: - ~/kde3src/kdevelop> - ./configure --prefix=(where-your-kde3-is) + ~/trinitysrc/kdevelop> + ./configure --prefix=(where-your-trinity-is) There is a caveat if you do so. You must provide a means for &kdevelop; to access the needed tools and parts in the &kde; directory when running. (You can still use the IDE without doing so, but with very restrained capabilities.) @@ -631,7 +631,7 @@ Call up a shell and have the following commands executed before you start &kdeve ~> - export KDEDIRS=/usr/local/kde:/opt/kde3 + export KDEDIRS=/usr/local/kde:/opt/trinity ~> @@ -648,9 +648,9 @@ Call up a shell and have the following commands executed before you start &kdeve The KDEDIRS environment variable must be set to the list of active &kde; directories in your system. We use - /usr/local/kde:/opt/kde3 + /usr/local/kde:/opt/trinity as an example only. - The /usr/local/kde directory may for instance contain an incomplete &kde; version you compiled for debug purposes, and the /opt/kde3 directory may in addition contain the standard &kde; version from your distribution that is used for everyday work. + The /usr/local/kde directory may for instance contain an incomplete &kde; version you compiled for debug purposes, and the /opt/trinity directory may in addition contain the standard &kde; version from your distribution that is used for everyday work. @@ -658,7 +658,7 @@ In a tcsh shell you must set the environment variables using: ~> - setenv KDEDIRS /usr/local/kde:/opt/kde3 + setenv KDEDIRS /usr/local/kde:/opt/trinity The kbuildsycoca command (build system control cache) looks around for libraries and caches their location and version, so that &kdevelop; can find them. The caveat is that it takes noticeable time—and it has to be run any time you call up the shell to start &kdevelop; from a non-default directory. You may want to put the above commands into a shell script to reduce the typing effort. @@ -707,7 +707,7 @@ Alas, this version is best used read-only over the internet. If you do not alway - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> ./configure --(options-as-usual) \ @@ -719,7 +719,7 @@ Alas, this version is best used read-only over the internet. If you do not alway (make will replace the global $KDEDIR variable with the actual &kde; directory setting recorded therein.) Then issue a make command as usual. After the &kdevelop; IDE has been built you have the option to build the API as well. For this you must issue - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> make apidocs @@ -728,7 +728,7 @@ This will build a Doxyfile in your &kdevelop; base director - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> su @@ -737,7 +737,7 @@ and entering the root password. Then install the API files: - ~/kde3src/kdevelop> + ~/trinitysrc/kdevelop> make install-apidox diff --git a/doc/kdevelop/project-management.docbook b/doc/kdevelop/project-management.docbook index 38a3ff8d..eb0aebce 100644 --- a/doc/kdevelop/project-management.docbook +++ b/doc/kdevelop/project-management.docbook @@ -639,7 +639,7 @@ CXX = @CXX@ -prefix = /home/bernd/kde3 +prefix = /home/bernd/trinity INSTALL = /usr/bin/ginstall -c -p build_triplet = i686-pc-linux-gnu CXX = g++ -- cgit v1.2.1