Test conversion to TQt3 from Qt3 8c6fc1f8e35fd264dd01c582ca5e7549b32ab731

1 files changed, 387 insertions, 0 deletions

diff --git a/src/3rdparty/libjpeg/jcdctmgr.c b/src/3rdparty/libjpeg/jcdctmgr.c
new file mode 100644
index 000000000..6e3461a14
--- /dev/null
+++ b/src/3rdparty/libjpeg/jcdctmgr.c
@@ -0,0 +1,387 @@
+/*
+ * jcdctmgr.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the forward-DCT management logic.
+ * This code selects a particular DCT implementation to be used,
+ * and it performs related housekeeping chores including coefficient
+ * quantization.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+
+/* Private subobject for this module */
+
+typedef struct {
+  struct jpeg_forward_dct pub;	/* public fields */
+
+  /* Pointer to the DCT routine actually in use */
+  forward_DCT_method_ptr do_dct;
+
+  /* The actual post-DCT divisors --- not identical to the quant table
+   * entries, because of scaling (especially for an unnormalized DCT).
+   * Each table is given in normal array order.
+   */
+  DCTELEM * divisors[NUM_QUANT_TBLS];
+
+#ifdef DCT_FLOAT_SUPPORTED
+  /* Same as above for the floating-point case. */
+  float_DCT_method_ptr do_float_dct;
+  FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
+#endif
+} my_fdct_controller;
+
+typedef my_fdct_controller * my_fdct_ptr;
+
+
+/*
+ * Initialize for a processing pass.
+ * Verify that all referenced Q-tables are present, and set up
+ * the divisor table for each one.
+ * In the current implementation, DCT of all components is done during
+ * the first pass, even if only some components will be output in the
+ * first scan.  Hence all components should be examined here.
+ */
+
+METHODDEF(void)
+start_pass_fdctmgr (j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  int ci, qtblno, i;
+  jpeg_component_info *compptr;
+  JTQUANT_TBL * qtbl;
+  DCTELEM * dtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    qtblno = compptr->quant_tbl_no;
+    /* Make sure specified quantization table is present */
+    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
+	cinfo->quant_tbl_ptrs[qtblno] == NULL)
+      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
+    qtbl = cinfo->quant_tbl_ptrs[qtblno];
+    /* Compute divisors for this quant table */
+    /* We may do this more than once for same table, but it's not a big deal */
+    switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+    case JDCT_ISLOW:
+      /* For LL&M IDCT method, divisors are equal to raw quantization
+       * coefficients multiplied by 8 (to counteract scaling).
+       */
+      if (fdct->divisors[qtblno] == NULL) {
+	fdct->divisors[qtblno] = (DCTELEM *)
+	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				      DCTSIZE2 * SIZEOF(DCTELEM));
+      }
+      dtbl = fdct->divisors[qtblno];
+      for (i = 0; i < DCTSIZE2; i++) {
+	dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
+      }
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+	/* For AA&N IDCT method, divisors are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 8.
+	 */
+#define CONST_BITS 14
+	static const INT16 aanscales[DCTSIZE2] = {
+	  /* precomputed values scaled up by 14 bits */
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+	};
+	SHIFT_TEMPS
+
+	if (fdct->divisors[qtblno] == NULL) {
+	  fdct->divisors[qtblno] = (DCTELEM *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					DCTSIZE2 * SIZEOF(DCTELEM));
+	}
+	dtbl = fdct->divisors[qtblno];
+	for (i = 0; i < DCTSIZE2; i++) {
+	  dtbl[i] = (DCTELEM)
+	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
+				  (INT32) aanscales[i]),
+		    CONST_BITS-3);
+	}
+      }
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+	/* For float AA&N IDCT method, divisors are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 8.
+	 * What's actually stored is 1/divisor so that the inner loop can
+	 * use a multiplication rather than a division.
+	 */
+	FAST_FLOAT * fdtbl;
+	int row, col;
+	static const double aanscalefactor[DCTSIZE] = {
+	  1.0, 1.387039845, 1.306562965, 1.175875602,
+	  1.0, 0.785694958, 0.541196100, 0.275899379
+	};
+
+	if (fdct->float_divisors[qtblno] == NULL) {
+	  fdct->float_divisors[qtblno] = (FAST_FLOAT *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					DCTSIZE2 * SIZEOF(FAST_FLOAT));
+	}
+	fdtbl = fdct->float_divisors[qtblno];
+	i = 0;
+	for (row = 0; row < DCTSIZE; row++) {
+	  for (col = 0; col < DCTSIZE; col++) {
+	    fdtbl[i] = (FAST_FLOAT)
+	      (1.0 / (((double) qtbl->quantval[i] *
+		       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
+	    i++;
+	  }
+	}
+      }
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Perform forward DCT on one or more blocks of a component.
+ *
+ * The input samples are taken from the sample_data[] array starting at
+ * position start_row/start_col, and moving to the right for any additional
+ * blocks. The quantized coefficients are returned in coef_blocks[].
+ */
+
+METHODDEF(void)
+forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
+	     JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+	     JDIMENSION start_row, JDIMENSION start_col,
+	     JDIMENSION num_blocks)
+/* This version is used for integer DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  forward_DCT_method_ptr do_dct = fdct->do_dct;
+  DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
+  DCTELEM workspace[DCTSIZE2];	/* work area for FDCT subroutine */
+  JDIMENSION bi;
+
+  sample_data += start_row;	/* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
+    /* Load data into workspace, applying unsigned->signed conversion */
+    { register DCTELEM *workspaceptr;
+      register JSAMPROW elemptr;
+      register int elemr;
+
+      workspaceptr = workspace;
+      for (elemr = 0; elemr < DCTSIZE; elemr++) {
+	elemptr = sample_data[elemr] + start_col;
+#if DCTSIZE == 8		/* unroll the inner loop */
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+#else
+	{ register int elemc;
+	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
+	    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+	  }
+	}
+#endif
+      }
+    }
+
+    /* Perform the DCT */
+    (*do_dct) (workspace);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    { register DCTELEM temp, qval;
+      register int i;
+      register JCOEFPTR output_ptr = coef_blocks[bi];
+
+      for (i = 0; i < DCTSIZE2; i++) {
+	qval = divisors[i];
+	temp = workspace[i];
+	/* Divide the coefficient value by qval, ensuring proper rounding.
+	 * Since C does not specify the direction of rounding for negative
+	 * quotients, we have to force the dividend positive for portability.
+	 *
+	 * In most files, at least half of the output values will be zero
+	 * (at default quantization settings, more like three-quarters...)
+	 * so we should ensure that this case is fast.  On many machines,
+	 * a comparison is enough cheaper than a divide to make a special test
+	 * a win.  Since both inputs will be nonnegative, we need only test
+	 * for a < b to discover whether a/b is 0.
+	 * If your machine's division is fast enough, define FAST_DIVIDE.
+	 */
+#ifdef FAST_DIVIDE
+#define DIVIDE_BY(a,b)	a /= b
+#else
+#define DIVIDE_BY(a,b)	if (a >= b) a /= b; else a = 0
+#endif
+	if (temp < 0) {
+	  temp = -temp;
+	  temp += qval>>1;	/* for rounding */
+	  DIVIDE_BY(temp, qval);
+	  temp = -temp;
+	} else {
+	  temp += qval>>1;	/* for rounding */
+	  DIVIDE_BY(temp, qval);
+	}
+	output_ptr[i] = (JCOEF) temp;
+      }
+    }
+  }
+}
+
+
+#ifdef DCT_FLOAT_SUPPORTED
+
+METHODDEF(void)
+forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		   JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+		   JDIMENSION start_row, JDIMENSION start_col,
+		   JDIMENSION num_blocks)
+/* This version is used for floating-point DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  float_DCT_method_ptr do_dct = fdct->do_float_dct;
+  FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
+  FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
+  JDIMENSION bi;
+
+  sample_data += start_row;	/* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
+    /* Load data into workspace, applying unsigned->signed conversion */
+    { register FAST_FLOAT *workspaceptr;
+      register JSAMPROW elemptr;
+      register int elemr;
+
+      workspaceptr = workspace;
+      for (elemr = 0; elemr < DCTSIZE; elemr++) {
+	elemptr = sample_data[elemr] + start_col;
+#if DCTSIZE == 8		/* unroll the inner loop */
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+#else
+	{ register int elemc;
+	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
+	    *workspaceptr++ = (FAST_FLOAT)
+	      (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+	  }
+	}
+#endif
+      }
+    }
+
+    /* Perform the DCT */
+    (*do_dct) (workspace);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    { register FAST_FLOAT temp;
+      register int i;
+      register JCOEFPTR output_ptr = coef_blocks[bi];
+
+      for (i = 0; i < DCTSIZE2; i++) {
+	/* Apply the quantization and scaling factor */
+	temp = workspace[i] * divisors[i];
+	/* Round to nearest integer.
+	 * Since C does not specify the direction of rounding for negative
+	 * quotients, we have to force the dividend positive for portability.
+	 * The maximum coefficient size is +-16K (for 12-bit data), so this
+	 * code should work for either 16-bit or 32-bit ints.
+	 */
+	output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
+      }
+    }
+  }
+}
+
+#endif /* DCT_FLOAT_SUPPORTED */
+
+
+/*
+ * Initialize FDCT manager.
+ */
+
+GLOBAL(void)
+jinit_forward_dct (j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct;
+  int i;
+
+  fdct = (my_fdct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_fdct_controller));
+  cinfo->fdct = (struct jpeg_forward_dct *) fdct;
+  fdct->pub.start_pass = start_pass_fdctmgr;
+
+  switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+  case JDCT_ISLOW:
+    fdct->pub.forward_DCT = forward_DCT;
+    fdct->do_dct = jpeg_fdct_islow;
+    break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  case JDCT_IFAST:
+    fdct->pub.forward_DCT = forward_DCT;
+    fdct->do_dct = jpeg_fdct_ifast;
+    break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  case JDCT_FLOAT:
+    fdct->pub.forward_DCT = forward_DCT_float;
+    fdct->do_float_dct = jpeg_fdct_float;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+    break;
+  }
+
+  /* Mark divisor tables unallocated */
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    fdct->divisors[i] = NULL;
+#ifdef DCT_FLOAT_SUPPORTED
+    fdct->float_divisors[i] = NULL;
+#endif
+  }
+}