Update from Qt3

1 files changed, 0 insertions, 224 deletions

diff --git a/src/3rdparty/libjpeg/jfdctfst.c b/src/3rdparty/libjpeg/jfdctfst.c
deleted file mode 100644
index ccb378a3b..000000000
--- a/src/3rdparty/libjpeg/jfdctfst.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * jfdctfst.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a fast, not so accurate integer implementation of the
- * forward DCT (Discrete Cosine Transform).
- *
- * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
- * on each column.  Direct algorithms are also available, but they are
- * much more complex and seem not to be any faster when reduced to code.
- *
- * This implementation is based on Arai, Agui, and Nakajima's algorithm for
- * scaled DCT.  Their original paper (Trans. IEICE E-71(11):1095) is in
- * Japanese, but the algorithm is described in the Pennebaker & Mitchell
- * JPEG textbook (see REFERENCES section in file README).  The following code
- * is based directly on figure 4-8 in P&M.
- * While an 8-point DCT cannot be done in less than 11 multiplies, it is
- * possible to arrange the computation so that many of the multiplies are
- * simple scalings of the final outputs.  These multiplies can then be
- * folded into the multiplications or divisions by the JPEG quantization
- * table entries.  The AA&N method leaves only 5 multiplies and 29 adds
- * to be done in the DCT itself.
- * The primary disadvantage of this method is that with fixed-point math,
- * accuracy is lost due to imprecise representation of the scaled
- * quantization values.  The smaller the quantization table entry, the less
- * precise the scaled value, so this implementation does worse with high-
- * quality-setting files than with low-quality ones.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h"		/* Private declarations for DCT subsystem */
-
-#ifdef DCT_IFAST_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/* Scaling decisions are generally the same as in the LL&M algorithm;
- * see jfdctint.c for more details.  However, we choose to descale
- * (right shift) multiplication products as soon as they are formed,
- * rather than carrying additional fractional bits into subsequent additions.
- * This compromises accuracy slightly, but it lets us save a few shifts.
- * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples)
- * everywhere except in the multiplications proper; this saves a good deal
- * of work on 16-bit-int machines.
- *
- * Again to save a few shifts, the intermediate results between pass 1 and
- * pass 2 are not upscaled, but are represented only to integral precision.
- *
- * A final compromise is to represent the multiplicative constants to only
- * 8 fractional bits, rather than 13.  This saves some shifting work on some
- * machines, and may also reduce the cost of multiplication (since there
- * are fewer one-bits in the constants).
- */
-
-#define CONST_BITS  8
-
-
-/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
- * causing a lot of useless floating-point operations at run time.
- * To get around this we use the following pre-calculated constants.
- * If you change CONST_BITS you may want to add appropriate values.
- * (With a reasonable C compiler, you can just rely on the FIX() macro...)
- */
-
-#if CONST_BITS == 8
-#define FIX_0_382683433  ((INT32)   98)		/* FIX(0.382683433) */
-#define FIX_0_541196100  ((INT32)  139)		/* FIX(0.541196100) */
-#define FIX_0_707106781  ((INT32)  181)		/* FIX(0.707106781) */
-#define FIX_1_306562965  ((INT32)  334)		/* FIX(1.306562965) */
-#else
-#define FIX_0_382683433  FIX(0.382683433)
-#define FIX_0_541196100  FIX(0.541196100)
-#define FIX_0_707106781  FIX(0.707106781)
-#define FIX_1_306562965  FIX(1.306562965)
-#endif
-
-
-/* We can gain a little more speed, with a further compromise in accuracy,
- * by omitting the addition in a descaling shift.  This yields an incorrectly
- * rounded result half the time...
- */
-
-#ifndef USE_ACCURATE_ROUNDING
-#undef DESCALE
-#define DESCALE(x,n)  RIGHT_SHIFT(x, n)
-#endif
-
-
-/* Multiply a DCTELEM variable by an INT32 constant, and immediately
- * descale to yield a DCTELEM result.
- */
-
-#define MULTIPLY(var,const)  ((DCTELEM) DESCALE((var) * (const), CONST_BITS))
-
-
-/*
- * Perform the forward DCT on one block of samples.
- */
-
-GLOBAL(void)
-jpeg_fdct_ifast (DCTELEM * data)
-{
-  DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
-  DCTELEM tmp10, tmp11, tmp12, tmp13;
-  DCTELEM z1, z2, z3, z4, z5, z11, z13;
-  DCTELEM *dataptr;
-  int ctr;
-  SHIFT_TEMPS
-
-  /* Pass 1: process rows. */
-
-  dataptr = data;
-  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
-    tmp0 = dataptr[0] + dataptr[7];
-    tmp7 = dataptr[0] - dataptr[7];
-    tmp1 = dataptr[1] + dataptr[6];
-    tmp6 = dataptr[1] - dataptr[6];
-    tmp2 = dataptr[2] + dataptr[5];
-    tmp5 = dataptr[2] - dataptr[5];
-    tmp3 = dataptr[3] + dataptr[4];
-    tmp4 = dataptr[3] - dataptr[4];
-    
-    /* Even part */
-    
-    tmp10 = tmp0 + tmp3;	/* phase 2 */
-    tmp13 = tmp0 - tmp3;
-    tmp11 = tmp1 + tmp2;
-    tmp12 = tmp1 - tmp2;
-    
-    dataptr[0] = tmp10 + tmp11; /* phase 3 */
-    dataptr[4] = tmp10 - tmp11;
-    
-    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
-    dataptr[2] = tmp13 + z1;	/* phase 5 */
-    dataptr[6] = tmp13 - z1;
-    
-    /* Odd part */
-
-    tmp10 = tmp4 + tmp5;	/* phase 2 */
-    tmp11 = tmp5 + tmp6;
-    tmp12 = tmp6 + tmp7;
-
-    /* The rotator is modified from fig 4-8 to avoid extra negations. */
-    z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
-    z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
-    z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
-    z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
-
-    z11 = tmp7 + z3;		/* phase 5 */
-    z13 = tmp7 - z3;
-
-    dataptr[5] = z13 + z2;	/* phase 6 */
-    dataptr[3] = z13 - z2;
-    dataptr[1] = z11 + z4;
-    dataptr[7] = z11 - z4;
-
-    dataptr += DCTSIZE;		/* advance pointer to next row */
-  }
-
-  /* Pass 2: process columns. */
-
-  dataptr = data;
-  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
-    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
-    tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
-    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
-    tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
-    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
-    tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
-    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
-    tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
-    
-    /* Even part */
-    
-    tmp10 = tmp0 + tmp3;	/* phase 2 */
-    tmp13 = tmp0 - tmp3;
-    tmp11 = tmp1 + tmp2;
-    tmp12 = tmp1 - tmp2;
-    
-    dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */
-    dataptr[DCTSIZE*4] = tmp10 - tmp11;
-    
-    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
-    dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */
-    dataptr[DCTSIZE*6] = tmp13 - z1;
-    
-    /* Odd part */
-
-    tmp10 = tmp4 + tmp5;	/* phase 2 */
-    tmp11 = tmp5 + tmp6;
-    tmp12 = tmp6 + tmp7;
-
-    /* The rotator is modified from fig 4-8 to avoid extra negations. */
-    z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
-    z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
-    z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
-    z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
-
-    z11 = tmp7 + z3;		/* phase 5 */
-    z13 = tmp7 - z3;
-
-    dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */
-    dataptr[DCTSIZE*3] = z13 - z2;
-    dataptr[DCTSIZE*1] = z11 + z4;
-    dataptr[DCTSIZE*7] = z11 - z4;
-
-    dataptr++;			/* advance pointer to next column */
-  }
-}
-
-#endif /* DCT_IFAST_SUPPORTED */