diff options
| author | Timothy Pearson <kb9vqf@pearsoncomputing.net> | 2011-11-08 12:31:36 -0600 |
|---|---|---|
| committer | Timothy Pearson <kb9vqf@pearsoncomputing.net> | 2011-11-08 12:31:36 -0600 |
| commit | d796c9dd933ab96ec83b9a634feedd5d32e1ba3f (patch) | |
| tree | 6e3dcca4f77e20ec8966c666aac7c35bd4704053 /src/3rdparty/libpng/libpng.txt | |
| download | tqt3-d796c9dd933ab96ec83b9a634feedd5d32e1ba3f.tar.gz tqt3-d796c9dd933ab96ec83b9a634feedd5d32e1ba3f.zip | |
Test conversion to TQt3 from Qt3 8c6fc1f8e35fd264dd01c582ca5e7549b32ab731
Diffstat (limited to 'src/3rdparty/libpng/libpng.txt')
| -rw-r--r-- | src/3rdparty/libpng/libpng.txt | 2905 |
1 files changed, 2905 insertions, 0 deletions
diff --git a/src/3rdparty/libpng/libpng.txt b/src/3rdparty/libpng/libpng.txt new file mode 100644 index 000000000..3eec69635 --- /dev/null +++ b/src/3rdparty/libpng/libpng.txt @@ -0,0 +1,2905 @@ +libpng.txt - A description on how to use and modify libpng + + libpng version 1.2.5 - October 3, 2002 + Updated and distributed by Glenn Randers-Pehrson + <randeg@alum.rpi.edu> + Copyright (c) 1998-2002 Glenn Randers-Pehrson + For conditions of distribution and use, see copyright + notice in png.h. + + based on: + + libpng 1.0 beta 6 version 0.96 May 28, 1997 + Updated and distributed by Andreas Dilger + Copyright (c) 1996, 1997 Andreas Dilger + + libpng 1.0 beta 2 - version 0.88 January 26, 1996 + For conditions of distribution and use, see copyright + notice in png.h. Copyright (c) 1995, 1996 Guy Eric + Schalnat, Group 42, Inc. + + Updated/rewritten per request in the libpng FAQ + Copyright (c) 1995, 1996 Frank J. T. Wojcik + December 18, 1995 & January 20, 1996 + +I. Introduction + +This file describes how to use and modify the PNG reference library +(known as libpng) for your own use. There are five sections to this +file: introduction, structures, reading, writing, and modification and +configuration notes for various special platforms. In addition to this +file, example.c is a good starting point for using the library, as +it is heavily commented and should include everything most people +will need. We assume that libpng is already installed; see the +INSTALL file for instructions on how to install libpng. + +Libpng was written as a companion to the PNG specification, as a way +of reducing the amount of time and effort it takes to support the PNG +file format in application programs. + +The PNG-1.2 specification is available at <http://www.libpng.org/pub/png> +and at <ftp://ftp.uu.net/graphics/png/documents/>. + +The PNG-1.0 specification is available +as RFC 2083 <ftp://ftp.uu.net/graphics/png/documents/> and as a +W3C Recommendation <http://www.w3.org/TR/REC.png.html>. Some +additional chunks are described in the special-purpose public chunks +documents at <ftp://ftp.uu.net/graphics/png/documents/>. + +Other information +about PNG, and the latest version of libpng, can be found at the PNG home +page, <http://www.libpng.org/pub/png/> +and at <ftp://ftp.uu.net/graphics/png/>. + +Most users will not have to modify the library significantly; advanced +users may want to modify it more. All attempts were made to make it as +complete as possible, while keeping the code easy to understand. +Currently, this library only supports C. Support for other languages +is being considered. + +Libpng has been designed to handle multiple sessions at one time, +to be easily modifiable, to be portable to the vast majority of +machines (ANSI, K&R, 16-, 32-, and 64-bit) available, and to be easy +to use. The ultimate goal of libpng is to promote the acceptance of +the PNG file format in whatever way possible. While there is still +work to be done (see the TODO file), libpng should cover the +majority of the needs of its users. + +Libpng uses zlib for its compression and decompression of PNG files. +Further information about zlib, and the latest version of zlib, can +be found at the zlib home page, <http://www.info-zip.org/pub/infozip/zlib/>. +The zlib compression utility is a general purpose utility that is +useful for more than PNG files, and can be used without libpng. +See the documentation delivered with zlib for more details. +You can usually find the source files for the zlib utility wherever you +find the libpng source files. + +Libpng is thread safe, provided the threads are using different +instances of the structures. Each thread should have its own +png_struct and png_info instances, and thus its own image. +Libpng does not protect itself against two threads using the +same instance of a structure. Note: thread safety may be defeated +by use of some of the MMX assembler code in pnggccrd.c, which is only +compiled when the user defines PNG_THREAD_UNSAFE_OK. + + +II. Structures + +There are two main structures that are important to libpng, png_struct +and png_info. The first, png_struct, is an internal structure that +will not, for the most part, be used by a user except as the first +variable passed to every libpng function call. + +The png_info structure is designed to provide information about the +PNG file. At one time, the fields of png_info were intended to be +directly accessible to the user. However, this tended to cause problems +with applications using dynamically loaded libraries, and as a result +a set of interface functions for png_info (the png_get_*() and png_set_*() +functions) was developed. The fields of png_info are still available for +older applications, but it is suggested that applications use the new +interfaces if at all possible. + +Applications that do make direct access to the members of png_struct (except +for png_ptr->jmpbuf) must be recompiled whenever the library is updated, +and applications that make direct access to the members of png_info must +be recompiled if they were compiled or loaded with libpng version 1.0.6, +in which the members were in a different order. In version 1.0.7, the +members of the png_info structure reverted to the old order, as they were +in versions 0.97c through 1.0.5. Starting with version 2.0.0, both +structures are going to be hidden, and the contents of the structures will +only be accessible through the png_get/png_set functions. + +The png.h header file is an invaluable reference for programming with libpng. +And while I'm on the topic, make sure you include the libpng header file: + +#include <png.h> + +III. Reading + +We'll now walk you through the possible functions to call when reading +in a PNG file sequentially, briefly explaining the syntax and purpose +of each one. See example.c and png.h for more detail. While +progressive reading is covered in the next section, you will still +need some of the functions discussed in this section to read a PNG +file. + +Setup + +You will want to do the I/O initialization(*) before you get into libpng, +so if it doesn't work, you don't have much to undo. Of course, you +will also want to insure that you are, in fact, dealing with a PNG +file. Libpng provides a simple check to see if a file is a PNG file. +To use it, pass in the first 1 to 8 bytes of the file to the function +png_sig_cmp(), and it will return 0 if the bytes match the corresponding +bytes of the PNG signature, or nonzero otherwise. Of course, the more bytes +you pass in, the greater the accuracy of the prediction. + +If you are intending to keep the file pointer open for use in libpng, +you must ensure you don't read more than 8 bytes from the beginning +of the file, and you also have to make a call to png_set_sig_bytes_read() +with the number of bytes you read from the beginning. Libpng will +then only check the bytes (if any) that your program didn't read. + +(*): If you are not using the standard I/O functions, you will need +to replace them with custom functions. See the discussion under +Customizing libpng. + + + FILE *fp = fopen(file_name, "rb"); + if (!fp) + { + return (ERROR); + } + fread(header, 1, number, fp); + is_png = !png_sig_cmp(header, 0, number); + if (!is_png) + { + return (NOT_PNG); + } + + +Next, png_struct and png_info need to be allocated and initialized. In +order to ensure that the size of these structures is correct even with a +dynamically linked libpng, there are functions to initialize and +allocate the structures. We also pass the library version, optional +pointers to error handling functions, and a pointer to a data struct for +use by the error functions, if necessary (the pointer and functions can +be NULL if the default error handlers are to be used). See the section +on Changes to Libpng below regarding the old initialization functions. +The structure allocation functions tquietly return NULL if they fail to +create the structure, so your application should check for that. + + png_structp png_ptr = png_create_read_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + if (!png_ptr) + return (ERROR); + + png_infop info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) + { + png_destroy_read_struct(&png_ptr, + (png_infopp)NULL, (png_infopp)NULL); + return (ERROR); + } + + png_infop end_info = png_create_info_struct(png_ptr); + if (!end_info) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + +If you want to use your own memory allocation routines, +define PNG_USER_MEM_SUPPORTED and use +png_create_read_struct_2() instead of png_create_read_struct(): + + png_structp png_ptr = png_create_read_struct_2 + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn, (png_voidp) + user_mem_ptr, user_malloc_fn, user_free_fn); + +The error handling routines passed to png_create_read_struct() +and the memory alloc/free routines passed to png_create_struct_2() +are only necessary if you are not using the libpng supplied error +handling and memory alloc/free functions. + +When libpng encounters an error, it expects to longjmp back +to your routine. Therefore, you will need to call setjmp and pass +your png_jmpbuf(png_ptr). If you read the file from different +routines, you will need to update the jmpbuf field every time you enter +a new routine that will call a png_*() function. + +See your documentation of setjmp/longjmp for your compiler for more +information on setjmp/longjmp. See the discussion on libpng error +handling in the Customizing Libpng section below for more information +on the libpng error handling. If an error occurs, and libpng longjmp's +back to your setjmp, you will want to call png_destroy_read_struct() to +free any memory. + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + &end_info); + fclose(fp); + return (ERROR); + } + +If you would rather avoid the complexity of setjmp/longjmp issues, +you can compile libpng with PNG_SETJMP_NOT_SUPPORTED, in which case +errors will result in a call to PNG_ABORT() which defaults to abort(). + +Now you need to set up the input code. The default for libpng is to +use the C function fread(). If you use this, you will need to pass a +valid FILE * in the function png_init_io(). Be sure that the file is +opened in binary mode. If you wish to handle reading data in another +way, you need not call the png_init_io() function, but you must then +implement the libpng I/O methods discussed in the Customizing Libpng +section below. + + png_init_io(png_ptr, fp); + +If you had previously opened the file and read any of the signature from +the beginning in order to see if this was a PNG file, you need to let +libpng know that there are some bytes missing from the start of the file. + + png_set_sig_bytes(png_ptr, number); + +Setting up callback code + +You can set up a callback function to handle any unknown chunks in the +input stream. You must supply the function + + read_chunk_callback(png_ptr ptr, + png_unknown_chunkp chunk); + { + /* The unknown chunk structure contains your + chunk data: */ + png_byte name[5]; + png_byte *data; + png_size_t size; + /* Note that libpng has already taken care of + the CRC handling */ + + /* put your code here. Return one of the + following: */ + + return (-n); /* chunk had an error */ + return (0); /* did not recognize */ + return (n); /* success */ + } + +(You can give your function another name that you like instead of +"read_chunk_callback") + +To inform libpng about your function, use + + png_set_read_user_chunk_fn(png_ptr, user_chunk_ptr, + read_chunk_callback); + +This names not only the callback function, but also a user pointer that +you can retrieve with + + png_get_user_chunk_ptr(png_ptr); + +At this point, you can set up a callback function that will be +called after each row has been read, which you can use to control +a progress meter or the like. It's demonstrated in pngtest.c. +You must supply a function + + void read_row_callback(png_ptr ptr, png_uint_32 row, + int pass); + { + /* put your code here */ + } + +(You can give it another name that you like instead of "read_row_callback") + +To inform libpng about your function, use + + png_set_read_status_fn(png_ptr, read_row_callback); + +Unknown-chunk handling + +Now you get to set the way the library processes unknown chunks in the +input PNG stream. Both known and unknown chunks will be read. Normal +behavior is that known chunks will be parsed into information in +various info_ptr members; unknown chunks will be discarded. To change +this, you can call: + + png_set_keep_unknown_chunks(png_ptr, info_ptr, keep, + chunk_list, num_chunks); + keep - 0: do not keep + 1: keep only if safe-to-copy + 2: keep even if unsafe-to-copy + chunk_list - list of chunks affected (a byte string, + five bytes per chunk, NULL or '\0' if + num_chunks is 0) + num_chunks - number of chunks affected; if 0, all + unknown chunks are affected + +Unknown chunks declared in this way will be saved as raw data onto a +list of png_unknown_chunk structures. If a chunk that is normally +known to libpng is named in the list, it will be handled as unknown, +according to the "keep" directive. If a chunk is named in successive +instances of png_set_keep_unknown_chunks(), the final instance will +take precedence. + +The high-level read interface + +At this point there are two ways to proceed; through the high-level +read interface, or through a sequence of low-level read operations. +You can use the high-level interface if (a) you are willing to read +the entire image into memory, and (b) the input transformations +you want to do are limited to the following set: + + PNG_TRANSFORM_IDENTITY No transformation + PNG_TRANSFORM_STRIP_16 Strip 16-bit samples to + 8 bits + PNG_TRANSFORM_STRIP_ALPHA Discard the alpha channel + PNG_TRANSFORM_PACKING Expand 1, 2 and 4-bit + samples to bytes + PNG_TRANSFORM_PACKSWAP Change order of packed + pixels to LSB first + PNG_TRANSFORM_EXPAND Perform set_expand() + PNG_TRANSFORM_INVERT_MONO Invert monochrome images + PNG_TRANSFORM_SHIFT Normalize pixels to the + sBIT depth + PNG_TRANSFORM_BGR Flip RGB to BGR, RGBA + to BGRA + PNG_TRANSFORM_SWAP_ALPHA Flip RGBA to ARGB or GA + to AG + PNG_TRANSFORM_INVERT_ALPHA Change alpha from opacity + to transparency + PNG_TRANSFORM_SWAP_ENDIAN Byte-swap 16-bit samples + +(This excludes setting a background color, doing gamma transformation, +dithering, and setting filler.) If this is the case, simply do this: + + png_read_png(png_ptr, info_ptr, png_transforms, NULL) + +where png_transforms is an integer containing the logical OR of +some set of transformation flags. This call is equivalent to png_read_info(), +followed the set of transformations indicated by the transform mask, +then png_read_image(), and finally png_read_end(). + +(The final parameter of this call is not yet used. Someday it might point +to transformation parameters retquired by some future input transform.) + +After you have called png_read_png(), you can retrieve the image data +with + + row_pointers = png_get_rows(png_ptr, info_ptr); + +where row_pointers is an array of pointers to the pixel data for each row: + + png_bytep row_pointers[height]; + +If you know your image size and pixel size ahead of time, you can allocate +row_pointers prior to calling png_read_png() with + + row_pointers = png_malloc(png_ptr, + height*sizeof(png_bytep)); + for (int i=0; i<height, i++) + row_pointers[i]=png_malloc(png_ptr, + width*pixel_size); + png_set_rows(png_ptr, info_ptr, &row_pointers); + +Alternatively you could allocate your image in one big block and define +row_pointers[i] to point into the proper places in your block. + +If you use png_set_rows(), the application is responsible for freeing +row_pointers (and row_pointers[i], if they were separately allocated). + +If you don't allocate row_pointers ahead of time, png_read_png() will +do it, and it'll be free'ed when you call png_destroy_*(). + +The low-level read interface + +If you are going the low-level route, you are now ready to read all +the file information up to the actual image data. You do this with a +call to png_read_info(). + + png_read_info(png_ptr, info_ptr); + +This will process all chunks up to but not including the image data. + +Querying the info structure + +Functions are used to get the information from the info_ptr once it +has been read. Note that these fields may not be completely filled +in until png_read_end() has read the chunk data following the image. + + png_get_IHDR(png_ptr, info_ptr, &width, &height, + &bit_depth, &color_type, &interlace_type, + &compression_type, &filter_method); + + width - holds the width of the image + in pixels (up to 2^31). + height - holds the height of the image + in pixels (up to 2^31). + bit_depth - holds the bit depth of one of the + image channels. (valid values are + 1, 2, 4, 8, 16 and depend also on + the color_type. See also + significant bits (sBIT) below). + color_type - describes which color/alpha channels + are present. + PNG_COLOR_TYPE_GRAY + (bit depths 1, 2, 4, 8, 16) + PNG_COLOR_TYPE_GRAY_ALPHA + (bit depths 8, 16) + PNG_COLOR_TYPE_PALETTE + (bit depths 1, 2, 4, 8) + PNG_COLOR_TYPE_RGB + (bit_depths 8, 16) + PNG_COLOR_TYPE_RGB_ALPHA + (bit_depths 8, 16) + + PNG_COLOR_MASK_PALETTE + PNG_COLOR_MASK_COLOR + PNG_COLOR_MASK_ALPHA + + filter_method - (must be PNG_FILTER_TYPE_BASE + for PNG 1.0, and can also be + PNG_INTRAPIXEL_DIFFERENCING if + the PNG datastream is embedded in + a MNG-1.0 datastream) + compression_type - (must be PNG_COMPRESSION_TYPE_BASE + for PNG 1.0) + interlace_type - (PNG_INTERLACE_NONE or + PNG_INTERLACE_ADAM7) + Any or all of interlace_type, compression_type, of + filter_method can be NULL if you are + not interested in their values. + + channels = png_get_channels(png_ptr, info_ptr); + channels - number of channels of info for the + color type (valid values are 1 (GRAY, + PALETTE), 2 (GRAY_ALPHA), 3 (RGB), + 4 (RGB_ALPHA or RGB + filler byte)) + rowbytes = png_get_rowbytes(png_ptr, info_ptr); + rowbytes - number of bytes needed to hold a row + + signature = png_get_signature(png_ptr, info_ptr); + signature - holds the signature read from the + file (if any). The data is kept in + the same offset it would be if the + whole signature were read (i.e. if an + application had already read in 4 + bytes of signature before starting + libpng, the remaining 4 bytes would + be in signature[4] through signature[7] + (see png_set_sig_bytes())). + + + width = png_get_image_width(png_ptr, + info_ptr); + height = png_get_image_height(png_ptr, + info_ptr); + bit_depth = png_get_bit_depth(png_ptr, + info_ptr); + color_type = png_get_color_type(png_ptr, + info_ptr); + filter_method = png_get_filter_type(png_ptr, + info_ptr); + compression_type = png_get_compression_type(png_ptr, + info_ptr); + interlace_type = png_get_interlace_type(png_ptr, + info_ptr); + + +These are also important, but their validity depends on whether the chunk +has been read. The png_get_valid(png_ptr, info_ptr, PNG_INFO_<chunk>) and +png_get_<chunk>(png_ptr, info_ptr, ...) functions return non-zero if the +data has been read, or zero if it is missing. The parameters to the +png_get_<chunk> are set directly if they are simple data types, or a pointer +into the info_ptr is returned for any complex types. + + png_get_PLTE(png_ptr, info_ptr, &palette, + &num_palette); + palette - the palette for the file + (array of png_color) + num_palette - number of entries in the palette + + png_get_gAMA(png_ptr, info_ptr, &gamma); + gamma - the gamma the file is written + at (PNG_INFO_gAMA) + + png_get_sRGB(png_ptr, info_ptr, &srgb_intent); + srgb_intent - the rendering intent (PNG_INFO_sRGB) + The presence of the sRGB chunk + means that the pixel data is in the + sRGB color space. This chunk also + implies specific values of gAMA and + cHRM. + + png_get_iCCP(png_ptr, info_ptr, &name, + &compression_type, &profile, &proflen); + name - The profile name. + compression - The compression type; always + PNG_COMPRESSION_TYPE_BASE for PNG 1.0. + You may give NULL to this argument to + ignore it. + profile - International Color Consortium color + profile data. May contain NULs. + proflen - length of profile data in bytes. + + png_get_sBIT(png_ptr, info_ptr, &sig_bit); + sig_bit - the number of significant bits for + (PNG_INFO_sBIT) each of the gray, + red, green, and blue channels, + whichever are appropriate for the + given color type (png_color_16) + + png_get_tRNS(png_ptr, info_ptr, &trans, &num_trans, + &trans_values); + trans - array of transparent entries for + palette (PNG_INFO_tRNS) + trans_values - graylevel or color sample values of + the single transparent color for + non-paletted images (PNG_INFO_tRNS) + num_trans - number of transparent entries + (PNG_INFO_tRNS) + + png_get_hIST(png_ptr, info_ptr, &hist); + (PNG_INFO_hIST) + hist - histogram of palette (array of + png_uint_16) + + png_get_tIME(png_ptr, info_ptr, &mod_time); + mod_time - time image was last modified + (PNG_VALID_tIME) + + png_get_bKGD(png_ptr, info_ptr, &background); + background - background color (PNG_VALID_bKGD) + valid 16-bit red, green and blue + values, regardless of color_type + + num_comments = png_get_text(png_ptr, info_ptr, + &text_ptr, &num_text); + num_comments - number of comments + text_ptr - array of png_text holding image + comments + text_ptr[i].compression - type of compression used + on "text" PNG_TEXT_COMPRESSION_NONE + PNG_TEXT_COMPRESSION_zTXt + PNG_ITXT_COMPRESSION_NONE + PNG_ITXT_COMPRESSION_zTXt + text_ptr[i].key - keyword for comment. Must contain + 1-79 characters. + text_ptr[i].text - text comments for current + keyword. Can be empty. + text_ptr[i].text_length - length of text string, + after decompression, 0 for iTXt + text_ptr[i].itxt_length - length of itxt string, + after decompression, 0 for tEXt/zTXt + text_ptr[i].lang - language of comment (empty + string for unknown). + text_ptr[i].lang_key - keyword in UTF-8 + (empty string for unknown). + num_text - number of comments (same as + num_comments; you can put NULL here + to avoid the duplication) + Note while png_set_text() will accept text, language, + and translated keywords that can be NULL pointers, the + structure returned by png_get_text will always contain + regular zero-terminated C strings. They might be + empty strings but they will never be NULL pointers. + + num_spalettes = png_get_sPLT(png_ptr, info_ptr, + &palette_ptr); + palette_ptr - array of palette structures holding + contents of one or more sPLT chunks + read. + num_spalettes - number of sPLT chunks read. + + png_get_oFFs(png_ptr, info_ptr, &offset_x, &offset_y, + &unit_type); + offset_x - positive offset from the left edge + of the screen + offset_y - positive offset from the top edge + of the screen + unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER + + png_get_pHYs(png_ptr, info_ptr, &res_x, &res_y, + &unit_type); + res_x - pixels/unit physical resolution in + x direction + res_y - pixels/unit physical resolution in + x direction + unit_type - PNG_RESOLUTION_UNKNOWN, + PNG_RESOLUTION_METER + + png_get_sCAL(png_ptr, info_ptr, &unit, &width, + &height) + unit - physical scale units (an integer) + width - width of a pixel in physical scale units + height - height of a pixel in physical scale units + (width and height are doubles) + + png_get_sCAL_s(png_ptr, info_ptr, &unit, &width, + &height) + unit - physical scale units (an integer) + width - width of a pixel in physical scale units + height - height of a pixel in physical scale units + (width and height are strings like "2.54") + + num_unknown_chunks = png_get_unknown_chunks(png_ptr, + info_ptr, &unknowns) + unknowns - array of png_unknown_chunk + structures holding unknown chunks + unknowns[i].name - name of unknown chunk + unknowns[i].data - data of unknown chunk + unknowns[i].size - size of unknown chunk's data + unknowns[i].location - position of chunk in file + + The value of "i" corresponds to the order in which the + chunks were read from the PNG file or inserted with the + png_set_unknown_chunks() function. + +The data from the pHYs chunk can be retrieved in several convenient +forms: + + res_x = png_get_x_pixels_per_meter(png_ptr, + info_ptr) + res_y = png_get_y_pixels_per_meter(png_ptr, + info_ptr) + res_x_and_y = png_get_pixels_per_meter(png_ptr, + info_ptr) + res_x = png_get_x_pixels_per_inch(png_ptr, + info_ptr) + res_y = png_get_y_pixels_per_inch(png_ptr, + info_ptr) + res_x_and_y = png_get_pixels_per_inch(png_ptr, + info_ptr) + aspect_ratio = png_get_pixel_aspect_ratio(png_ptr, + info_ptr) + + (Each of these returns 0 [signifying "unknown"] if + the data is not present or if res_x is 0; + res_x_and_y is 0 if res_x != res_y) + +The data from the oFFs chunk can be retrieved in several convenient +forms: + + x_offset = png_get_x_offset_microns(png_ptr, info_ptr); + y_offset = png_get_y_offset_microns(png_ptr, info_ptr); + x_offset = png_get_x_offset_inches(png_ptr, info_ptr); + y_offset = png_get_y_offset_inches(png_ptr, info_ptr); + + (Each of these returns 0 [signifying "unknown" if both + x and y are 0] if the data is not present or if the + chunk is present but the unit is the pixel) + +For more information, see the png_info definition in png.h and the +PNG specification for chunk contents. Be careful with trusting +rowbytes, as some of the transformations could increase the space +needed to hold a row (expand, filler, gray_to_rgb, etc.). +See png_read_update_info(), below. + +A tquick word about text_ptr and num_text. PNG stores comments in +keyword/text pairs, one pair per chunk, with no limit on the number +of text chunks, and a 2^31 byte limit on their size. While there are +suggested keywords, there is no retquirement to restrict the use to these +strings. It is strongly suggested that keywords and text be sensible +to humans (that's the point), so don't use abbreviations. Non-printing +symbols are not allowed. See the PNG specification for more details. +There is also no retquirement to have text after the keyword. + +Keywords should be limited to 79 Latin-1 characters without leading or +trailing spaces, but non-consecutive spaces are allowed within the +keyword. It is possible to have the same keyword any number of times. +The text_ptr is an array of png_text structures, each holding a +pointer to a language string, a pointer to a keyword and a pointer to +a text string. The text string, language code, and translated +keyword may be empty or NULL pointers. The keyword/text +pairs are put into the array in the order that they are received. +However, some or all of the text chunks may be after the image, so, to +make sure you have read all the text chunks, don't mess with these +until after you read the stuff after the image. This will be +mentioned again below in the discussion that goes with png_read_end(). + +Input transformations + +After you've read the header information, you can set up the library +to handle any special transformations of the image data. The various +ways to transform the data will be described in the order that they +should occur. This is important, as some of these change the color +type and/or bit depth of the data, and some others only work on +certain color types and bit depths. Even though each transformation +checks to see if it has data that it can do something with, you should +make sure to only enable a transformation if it will be valid for the +data. For example, don't swap red and blue on grayscale data. + +The colors used for the background and transparency values should be +supplied in the same format/depth as the current image data. They +are stored in the same format/depth as the image data in a bKGD or tRNS +chunk, so this is what libpng expects for this data. The colors are +transformed to keep in sync with the image data when an application +calls the png_read_update_info() routine (see below). + +Data will be decoded into the supplied row buffers packed into bytes +unless the library has been told to transform it into another format. +For example, 4 bit/pixel paletted or grayscale data will be returned +2 pixels/byte with the leftmost pixel in the high-order bits of the +byte, unless png_set_packing() is called. 8-bit RGB data will be stored +in RGB RGB RGB format unless png_set_filler() is called to insert filler +bytes, either before or after each RGB triplet. 16-bit RGB data will +be returned RRGGBB RRGGBB, with the most significant byte of the color +value first, unless png_set_strip_16() is called to transform it to +regular RGB RGB triplets, or png_set_filler() is called to insert +filler bytes, either before or after each RRGGBB triplet. Similarly, +8-bit or 16-bit grayscale data can be modified with png_set_filler() +or png_set_strip_16(). + +The following code transforms grayscale images of less than 8 to 8 bits, +changes paletted images to RGB, and adds a full alpha channel if there is +transparency information in a tRNS chunk. This is most useful on +grayscale images with bit depths of 2 or 4 or if there is a multiple-image +viewing application that wishes to treat all images in the same way. + + if (color_type == PNG_COLOR_TYPE_PALETTE) + png_set_palette_to_rgb(png_ptr); + + if (color_type == PNG_COLOR_TYPE_GRAY && + bit_depth < 8) png_set_gray_1_2_4_to_8(png_ptr); + + if (png_get_valid(png_ptr, info_ptr, + PNG_INFO_tRNS)) png_set_tRNS_to_alpha(png_ptr); + +These three functions are actually aliases for png_set_expand(), added +in libpng version 1.0.4, with the function names expanded to improve code +readability. In some future version they may actually do different +things. + +PNG can have files with 16 bits per channel. If you only can handle +8 bits per channel, this will strip the pixels down to 8 bit. + + if (bit_depth == 16) + png_set_strip_16(png_ptr); + +If, for some reason, you don't need the alpha channel on an image, +and you want to remove it rather than combining it with the background +(but the image author certainly had in mind that you *would* combine +it with the background, so that's what you should probably do): + + if (color_type & PNG_COLOR_MASK_ALPHA) + png_set_strip_alpha(png_ptr); + +In PNG files, the alpha channel in an image +is the level of opacity. If you need the alpha channel in an image to +be the level of transparency instead of opacity, you can invert the +alpha channel (or the tRNS chunk data) after it's read, so that 0 is +fully opaque and 255 (in 8-bit or paletted images) or 65535 (in 16-bit +images) is fully transparent, with + + png_set_invert_alpha(png_ptr); + +PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as +they can, resulting in, for example, 8 pixels per byte for 1 bit +files. This code expands to 1 pixel per byte without changing the +values of the pixels: + + if (bit_depth < 8) + png_set_packing(png_ptr); + +PNG files have possible bit depths of 1, 2, 4, 8, and 16. All pixels +stored in a PNG image have been "scaled" or "shifted" up to the next +higher possible bit depth (e.g. from 5 bits/sample in the range [0,31] to +8 bits/sample in the range [0, 255]). However, it is also possible to +convert the PNG pixel data back to the original bit depth of the image. +This call reduces the pixels back down to the original bit depth: + + png_color_8p sig_bit; + + if (png_get_sBIT(png_ptr, info_ptr, &sig_bit)) + png_set_shift(png_ptr, sig_bit); + +PNG files store 3-color pixels in red, green, blue order. This code +changes the storage of the pixels to blue, green, red: + + if (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_bgr(png_ptr); + +PNG files store RGB pixels packed into 3 or 6 bytes. This code expands them +into 4 or 8 bytes for windowing systems that need them in this format: + + if (color_type == PNG_COLOR_TYPE_RGB) + png_set_filler(png_ptr, filler, PNG_FILLER_BEFORE); + +where "filler" is the 8 or 16-bit number to fill with, and the location is +either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending upon whether +you want the filler before the RGB or after. This transformation +does not affect images that already have full alpha channels. To add an +opaque alpha channel, use filler=0xff or 0xffff and PNG_FILLER_AFTER which +will generate RGBA pixels. + +If you are reading an image with an alpha channel, and you need the +data as ARGB instead of the normal PNG format RGBA: + + if (color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_swap_alpha(png_ptr); + +For some uses, you may want a grayscale image to be represented as +RGB. This code will do that conversion: + + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_gray_to_rgb(png_ptr); + +Conversely, you can convert an RGB or RGBA image to grayscale or grayscale +with alpha. + + if (color_type == PNG_COLOR_TYPE_RGB || + color_type == PNG_COLOR_TYPE_RGB_ALPHA) + png_set_rgb_to_gray_fixed(png_ptr, error_action, + int red_weight, int green_weight); + + error_action = 1: silently do the conversion + error_action = 2: issue a warning if the original + image has any pixel where + red != green or red != blue + error_action = 3: issue an error and abort the + conversion if the original + image has any pixel where + red != green or red != blue + + red_weight: weight of red component times 100000 + green_weight: weight of green component times 100000 + If either weight is negative, default + weights (21268, 71514) are used. + +If you have set error_action = 1 or 2, you can +later check whether the image really was gray, after processing +the image rows, with the png_get_rgb_to_gray_status(png_ptr) function. +It will return a png_byte that is zero if the image was gray or +1 if there were any non-gray pixels. bKGD and sBIT data +will be silently converted to grayscale, using the green channel +data, regardless of the error_action setting. + +With red_weight+green_weight<=100000, +the normalized graylevel is computed: + + int rw = red_weight * 65536; + int gw = green_weight * 65536; + int bw = 65536 - (rw + gw); + gray = (rw*red + gw*green + bw*blue)/65536; + +The default values approximate those recommended in the Charles +Poynton's Color FAQ, <http://www.inforamp.net/~poynton/> +Copyright (c) 1998-01-04 Charles Poynton poynton@inforamp.net + + Y = 0.212671 * R + 0.715160 * G + 0.072169 * B + +Libpng approximates this with + + Y = 0.21268 * R + 0.7151 * G + 0.07217 * B + +which can be expressed with integers as + + Y = (6969 * R + 23434 * G + 2365 * B)/32768 + +The calculation is done in a linear colorspace, if the image gamma +is known. + +If you have a grayscale and you are using png_set_expand_depth(), +png_set_expand(), or png_set_gray_to_rgb to change to truecolor or to +a higher bit-depth, you must either supply the background color as a gray +value at the original file bit-depth (need_expand = 1) or else supply the +background color as an RGB triplet at the final, expanded bit depth +(need_expand = 0). Similarly, if you are reading a paletted image, you +must either supply the background color as a palette index (need_expand = 1) +or as an RGB triplet that may or may not be in the palette (need_expand = 0). + + png_color_16 my_background; + png_color_16p image_background; + + if (png_get_bKGD(png_ptr, info_ptr, &image_background)) + png_set_background(png_ptr, image_background, + PNG_BACKGROUND_GAMMA_FILE, 1, 1.0); + else + png_set_background(png_ptr, &my_background, + PNG_BACKGROUND_GAMMA_SCREEN, 0, 1.0); + +The png_set_background() function tells libpng to composite images +with alpha or simple transparency against the supplied background +color. If the PNG file contains a bKGD chunk (PNG_INFO_bKGD valid), +you may use this color, or supply another color more suitable for +the current display (e.g., the background color from a web page). You +need to tell libpng whether the color is in the gamma space of the +display (PNG_BACKGROUND_GAMMA_SCREEN for colors you supply), the file +(PNG_BACKGROUND_GAMMA_FILE for colors from the bKGD chunk), or one +that is neither of these gammas (PNG_BACKGROUND_GAMMA_UNIQUE - I don't +know why anyone would use this, but it's here). + +To properly display PNG images on any kind of system, the application needs +to know what the display gamma is. Ideally, the user will know this, and +the application will allow them to set it. One method of allowing the user +to set the display gamma separately for each system is to check for a +SCREEN_GAMMA or DISPLAY_GAMMA environment variable, which will hopefully be +correctly set. + +Note that display_gamma is the overall gamma correction retquired to produce +pleasing results, which depends on the lighting conditions in the surrounding +environment. In a dim or brightly lit room, no compensation other than +the physical gamma exponent of the monitor is needed, while in a dark room +a slightly smaller exponent is better. + + double gamma, screen_gamma; + + if (/* We have a user-defined screen + gamma value */) + { + screen_gamma = user_defined_screen_gamma; + } + /* One way that applications can share the same + screen gamma value */ + else if ((gamma_str = getenv("SCREEN_GAMMA")) + != NULL) + { + screen_gamma = (double)atof(gamma_str); + } + /* If we don't have another value */ + else + { + screen_gamma = 2.2; /* A good guess for a + PC monitor in a bright office or a dim room */ + screen_gamma = 2.0; /* A good guess for a + PC monitor in a dark room */ + screen_gamma = 1.7 or 1.0; /* A good + guess for Mac systems */ + } + +The png_set_gamma() function handles gamma transformations of the data. +Pass both the file gamma and the current screen_gamma. If the file does +not have a gamma value, you can pass one anyway if you have an idea what +it is (usually 0.45455 is a good guess for GIF images on PCs). Note +that file gammas are inverted from screen gammas. See the discussions +on gamma in the PNG specification for an excellent description of what +gamma is, and why all applications should support it. It is strongly +recommended that PNG viewers support gamma correction. + + if (png_get_gAMA(png_ptr, info_ptr, &gamma)) + png_set_gamma(png_ptr, screen_gamma, gamma); + else + png_set_gamma(png_ptr, screen_gamma, 0.45455); + +If you need to reduce an RGB file to a paletted file, or if a paletted +file has more entries then will fit on your screen, png_set_dither() +will do that. Note that this is a simple match dither that merely +finds the closest color available. This should work fairly well with +optimized palettes, and fairly badly with linear color cubes. If you +pass a palette that is larger then maximum_colors, the file will +reduce the number of colors in the palette so it will fit into +maximum_colors. If there is a histogram, it will use it to make +more intelligent choices when reducing the palette. If there is no +histogram, it may not do as good a job. + + if (color_type & PNG_COLOR_MASK_COLOR) + { + if (png_get_valid(png_ptr, info_ptr, + PNG_INFO_PLTE)) + { + png_uint_16p histogram = NULL; + + png_get_hIST(png_ptr, info_ptr, + &histogram); + png_set_dither(png_ptr, palette, num_palette, + max_screen_colors, histogram, 1); + } + else + { + png_color std_color_cube[MAX_SCREEN_COLORS] = + { ... colors ... }; + + png_set_dither(png_ptr, std_color_cube, + MAX_SCREEN_COLORS, MAX_SCREEN_COLORS, + NULL,0); + } + } + +PNG files describe monochrome as black being zero and white being one. +The following code will reverse this (make black be one and white be +zero): + + if (bit_depth == 1 && color_type == PNG_COLOR_TYPE_GRAY) + png_set_invert_mono(png_ptr); + +This function can also be used to invert grayscale and gray-alpha images: + + if (color_type == PNG_COLOR_TYPE_GRAY || + color_type == PNG_COLOR_TYPE_GRAY_ALPHA) + png_set_invert_mono(png_ptr); + +PNG files store 16 bit pixels in network byte order (big-endian, +ie. most significant bits first). This code changes the storage to the +other way (little-endian, i.e. least significant bits first, the +way PCs store them): + + if (bit_depth == 16) + png_set_swap(png_ptr); + +If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you +need to change the order the pixels are packed into bytes, you can use: + + if (bit_depth < 8) + png_set_packswap(png_ptr); + +Finally, you can write your own transformation function if none of +the existing ones meets your needs. This is done by setting a callback +with + + png_set_read_user_transform_fn(png_ptr, + read_transform_fn); + +You must supply the function + + void read_transform_fn(png_ptr ptr, row_info_ptr + row_info, png_bytep data) + +See pngtest.c for a working example. Your function will be called +after all of the other transformations have been processed. + +You can also set up a pointer to a user structure for use by your +callback function, and you can inform libpng that your transform +function will change the number of channels or bit depth with the +function + + png_set_user_transform_info(png_ptr, user_ptr, + user_depth, user_channels); + +The user's application, not libpng, is responsible for allocating and +freeing any memory retquired for the user structure. + +You can retrieve the pointer via the function +png_get_user_transform_ptr(). For example: + + voidp read_user_transform_ptr = + png_get_user_transform_ptr(png_ptr); + +The last thing to handle is interlacing; this is covered in detail below, +but you must call the function here if you want libpng to handle expansion +of the interlaced image. + + number_of_passes = png_set_interlace_handling(png_ptr); + +After setting the transformations, libpng can update your png_info +structure to reflect any transformations you've requested with this +call. This is most useful to update the info structure's rowbytes +field so you can use it to allocate your image memory. This function +will also update your palette with the correct screen_gamma and +background if these have been given with the calls above. + + png_read_update_info(png_ptr, info_ptr); + +After you call png_read_update_info(), you can allocate any +memory you need to hold the image. The row data is simply +raw byte data for all forms of images. As the actual allocation +varies among applications, no example will be given. If you +are allocating one large chunk, you will need to build an +array of pointers to each row, as it will be needed for some +of the functions below. + +Reading image data + +After you've allocated memory, you can read the image data. +The simplest way to do this is in one function call. If you are +allocating enough memory to hold the whole image, you can just +call png_read_image() and libpng will read in all the image data +and put it in the memory area supplied. You will need to pass in +an array of pointers to each row. + +This function automatically handles interlacing, so you don't need +to call png_set_interlace_handling() or call this function multiple +times, or any of that other stuff necessary with png_read_rows(). + + png_read_image(png_ptr, row_pointers); + +where row_pointers is: + + png_bytep row_pointers[height]; + +You can point to void or char or whatever you use for pixels. + +If you don't want to read in the whole image at once, you can +use png_read_rows() instead. If there is no interlacing (check +interlace_type == PNG_INTERLACE_NONE), this is simple: + + png_read_rows(png_ptr, row_pointers, NULL, + number_of_rows); + +where row_pointers is the same as in the png_read_image() call. + +If you are doing this just one row at a time, you can do this with +a single row_pointer instead of an array of row_pointers: + + png_bytep row_pointer = row; + png_read_row(png_ptr, row_pointer, NULL); + +If the file is interlaced (interlace_type != 0 in the IHDR chunk), things +get somewhat harder. The only current (PNG Specification version 1.2) +interlacing type for PNG is (interlace_type == PNG_INTERLACE_ADAM7) +is a somewhat complicated 2D interlace scheme, known as Adam7, that +breaks down an image into seven smaller images of varying size, based +on an 8x8 grid. + +libpng can fill out those images or it can give them to you "as is". +If you want them filled out, there are two ways to do that. The one +mentioned in the PNG specification is to expand each pixel to cover +those pixels that have not been read yet (the "rectangle" method). +This results in a blocky image for the first pass, which gradually +smooths out as more pixels are read. The other method is the "sparkle" +method, where pixels are drawn only in their final locations, with the +rest of the image remaining whatever colors they were initialized to +before the start of the read. The first method usually looks better, +but tends to be slower, as there are more pixels to put in the rows. + +If you don't want libpng to handle the interlacing details, just call +png_read_rows() seven times to read in all seven images. Each of the +images is a valid image by itself, or they can all be combined on an +8x8 grid to form a single image (although if you intend to combine them +you would be far better off using the libpng interlace handling). + +The first pass will return an image 1/8 as wide as the entire image +(every 8th column starting in column 0) and 1/8 as high as the original +(every 8th row starting in row 0), the second will be 1/8 as wide +(starting in column 4) and 1/8 as high (also starting in row 0). The +third pass will be 1/4 as wide (every 4th pixel starting in column 0) and +1/8 as high (every 8th row starting in row 4), and the fourth pass will +be 1/4 as wide and 1/4 as high (every 4th column starting in column 2, +and every 4th row starting in row 0). The fifth pass will return an +image 1/2 as wide, and 1/4 as high (starting at column 0 and row 2), +while the sixth pass will be 1/2 as wide and 1/2 as high as the original +(starting in column 1 and row 0). The seventh and final pass will be as +wide as the original, and 1/2 as high, containing all of the odd +numbered scanlines. Phew! + +If you want libpng to expand the images, call this before calling +png_start_read_image() or png_read_update_info(): + + if (interlace_type == PNG_INTERLACE_ADAM7) + number_of_passes + = png_set_interlace_handling(png_ptr); + +This will return the number of passes needed. Currently, this +is seven, but may change if another interlace type is added. +This function can be called even if the file is not interlaced, +where it will return one pass. + +If you are not going to display the image after each pass, but are +going to wait until the entire image is read in, use the sparkle +effect. This effect is faster and the end result of either method +is exactly the same. If you are planning on displaying the image +after each pass, the "rectangle" effect is generally considered the +better looking one. + +If you only want the "sparkle" effect, just call png_read_rows() as +normal, with the third parameter NULL. Make sure you make pass over +the image number_of_passes times, and you don't change the data in the +rows between calls. You can change the locations of the data, just +not the data. Each pass only writes the pixels appropriate for that +pass, and assumes the data from previous passes is still valid. + + png_read_rows(png_ptr, row_pointers, NULL, + number_of_rows); + +If you only want the first effect (the rectangles), do the same as +before except pass the row buffer in the third parameter, and leave +the second parameter NULL. + + png_read_rows(png_ptr, NULL, row_pointers, + number_of_rows); + +Finishing a sequential read + +After you are finished reading the image through either the high- or +low-level interfaces, you can finish reading the file. If you are +interested in comments or time, which may be stored either before or +after the image data, you should pass the separate png_info struct if +you want to keep the comments from before and after the image +separate. If you are not interested, you can pass NULL. + + png_read_end(png_ptr, end_info); + +When you are done, you can free all memory allocated by libpng like this: + + png_destroy_read_struct(&png_ptr, &info_ptr, + &end_info); + +It is also possible to individually free the info_ptr members that +point to libpng-allocated storage with the following function: + + png_free_data(png_ptr, info_ptr, mask, seq) + mask - identifies data to be freed, a mask + containing the logical OR of one or + more of + PNG_FREE_PLTE, PNG_FREE_TRNS, + PNG_FREE_HIST, PNG_FREE_ICCP, + PNG_FREE_PCAL, PNG_FREE_ROWS, + PNG_FREE_SCAL, PNG_FREE_SPLT, + PNG_FREE_TEXT, PNG_FREE_UNKN, + or simply PNG_FREE_ALL + seq - sequence number of item to be freed + (-1 for all items) + +This function may be safely called when the relevant storage has +already been freed, or has not yet been allocated, or was allocated +by the user and not by libpng, and will in those +cases do nothing. The "seq" parameter is ignored if only one item +of the selected data type, such as PLTE, is allowed. If "seq" is not +-1, and multiple items are allowed for the data type identified in +the mask, such as text or sPLT, only the n'th item in the structure +is freed, where n is "seq". + +The default behavior is only to free data that was allocated internally +by libpng. This can be changed, so that libpng will not free the data, +or so that it will free data that was allocated by the user with png_malloc() +or png_zalloc() and passed in via a png_set_*() function, with + + png_data_freer(png_ptr, info_ptr, freer, mask) + mask - which data elements are affected + same choices as in png_free_data() + freer - one of + PNG_DESTROY_WILL_FREE_DATA + PNG_SET_WILL_FREE_DATA + PNG_USER_WILL_FREE_DATA + +This function only affects data that has already been allocated. +You can call this function after reading the PNG data but before calling +any png_set_*() functions, to control whether the user or the png_set_*() +function is responsible for freeing any existing data that might be present, +and again after the png_set_*() functions to control whether the user +or png_destroy_*() is supposed to free the data. When the user assumes +responsibility for libpng-allocated data, the application must use +png_free() to free it, and when the user transfers responsibility to libpng +for data that the user has allocated, the user must have used png_malloc() +or png_zalloc() to allocate it. + +If you allocated your row_pointers in a single block, as suggested above in +the description of the high level read interface, you must not transfer +responsibility for freeing it to the png_set_rows or png_read_destroy function, +because they would also try to free the individual row_pointers[i]. + +If you allocated text_ptr.text, text_ptr.lang, and text_ptr.translated_keyword +separately, do not transfer responsibility for freeing text_ptr to libpng, +because when libpng fills a png_text structure it combines these members with +the key member, and png_free_data() will free only text_ptr.key. Similarly, +if you transfer responsibility for free'ing text_ptr from libpng to your +application, your application must not separately free those members. + +The png_free_data() function will turn off the "valid" flag for anything +it frees. If you need to turn the flag off for a chunk that was freed by your +application instead of by libpng, you can use + + png_set_invalid(png_ptr, info_ptr, mask); + mask - identifies the chunks to be made invalid, + containing the logical OR of one or + more of + PNG_INFO_gAMA, PNG_INFO_sBIT, + PNG_INFO_cHRM, PNG_INFO_PLTE, + PNG_INFO_tRNS, PNG_INFO_bKGD, + PNG_INFO_hIST, PNG_INFO_pHYs, + PNG_INFO_oFFs, PNG_INFO_tIME, + PNG_INFO_pCAL, PNG_INFO_sRGB, + PNG_INFO_iCCP, PNG_INFO_sPLT, + PNG_INFO_sCAL, PNG_INFO_IDAT + +For a more compact example of reading a PNG image, see the file example.c. + +Reading PNG files progressively + +The progressive reader is slightly different then the non-progressive +reader. Instead of calling png_read_info(), png_read_rows(), and +png_read_end(), you make one call to png_process_data(), which calls +callbacks when it has the info, a row, or the end of the image. You +set up these callbacks with png_set_progressive_read_fn(). You don't +have to worry about the input/output functions of libpng, as you are +giving the library the data directly in png_process_data(). I will +assume that you have read the section on reading PNG files above, +so I will only highlight the differences (although I will show +all of the code). + +png_structp png_ptr; +png_infop info_ptr; + + /* An example code fragment of how you would + initialize the progressive reader in your + application. */ + int + initialize_png_reader() + { + png_ptr = png_create_read_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + if (!png_ptr) + return (ERROR); + info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) + { + png_destroy_read_struct(&png_ptr, (png_infopp)NULL, + (png_infopp)NULL); + return (ERROR); + } + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + + /* This one's new. You can provide functions + to be called when the header info is valid, + when each row is completed, and when the image + is finished. If you aren't using all functions, + you can specify NULL parameters. Even when all + three functions are NULL, you need to call + png_set_progressive_read_fn(). You can use + any struct as the user_ptr (cast to a void pointer + for the function call), and retrieve the pointer + from inside the callbacks using the function + + png_get_progressive_ptr(png_ptr); + + which will return a void pointer, which you have + to cast appropriately. + */ + png_set_progressive_read_fn(png_ptr, (void *)user_ptr, + info_callback, row_callback, end_callback); + + return 0; + } + + /* A code fragment that you call as you receive blocks + of data */ + int + process_data(png_bytep buffer, png_uint_32 length) + { + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_read_struct(&png_ptr, &info_ptr, + (png_infopp)NULL); + return (ERROR); + } + + /* This one's new also. Simply give it a chunk + of data from the file stream (in order, of + course). On machines with segmented memory + models machines, don't give it any more than + 64K. The library seems to run fine with sizes + of 4K. Although you can give it much less if + necessary (I assume you can give it chunks of + 1 byte, I haven't tried less then 256 bytes + yet). When this function returns, you may + want to display any rows that were generated + in the row callback if you don't already do + so there. + */ + png_process_data(png_ptr, info_ptr, buffer, length); + return 0; + } + + /* This function is called (as set by + png_set_progressive_read_fn() above) when enough data + has been supplied so all of the header has been + read. + */ + void + info_callback(png_structp png_ptr, png_infop info) + { + /* Do any setup here, including setting any of + the transformations mentioned in the Reading + PNG files section. For now, you _must_ call + either png_start_read_image() or + png_read_update_info() after all the + transformations are set (even if you don't set + any). You may start getting rows before + png_process_data() returns, so this is your + last chance to prepare for that. + */ + } + + /* This function is called when each row of image + data is complete */ + void + row_callback(png_structp png_ptr, png_bytep new_row, + png_uint_32 row_num, int pass) + { + /* If the image is interlaced, and you turned + on the interlace handler, this function will + be called for every row in every pass. Some + of these rows will not be changed from the + previous pass. When the row is not changed, + the new_row variable will be NULL. The rows + and passes are called in order, so you don't + really need the row_num and pass, but I'm + supplying them because it may make your life + easier. + + For the non-NULL rows of interlaced images, + you must call png_progressive_combine_row() + passing in the row and the old row. You can + call this function for NULL rows (it will just + return) and for non-interlaced images (it just + does the memcpy for you) if it will make the + code easier. Thus, you can just do this for + all cases: + */ + + png_progressive_combine_row(png_ptr, old_row, + new_row); + + /* where old_row is what was displayed for + previously for the row. Note that the first + pass (pass == 0, really) will completely cover + the old row, so the rows do not have to be + initialized. After the first pass (and only + for interlaced images), you will have to pass + the current row, and the function will combine + the old row and the new row. + */ + } + + void + end_callback(png_structp png_ptr, png_infop info) + { + /* This function is called after the whole image + has been read, including any chunks after the + image (up to and including the IEND). You + will usually have the same info chunk as you + had in the header, although some data may have + been added to the comments and time fields. + + Most people won't do much here, perhaps setting + a flag that marks the image as finished. + */ + } + + + +IV. Writing + +Much of this is very similar to reading. However, everything of +importance is repeated here, so you won't have to constantly look +back up in the reading section to understand writing. + +Setup + +You will want to do the I/O initialization before you get into libpng, +so if it doesn't work, you don't have anything to undo. If you are not +using the standard I/O functions, you will need to replace them with +custom writing functions. See the discussion under Customizing libpng. + + FILE *fp = fopen(file_name, "wb"); + if (!fp) + { + return (ERROR); + } + +Next, png_struct and png_info need to be allocated and initialized. +As these can be both relatively large, you may not want to store these +on the stack, unless you have stack space to spare. Of course, you +will want to check if they return NULL. If you are also reading, +you won't want to name your read structure and your write structure +both "png_ptr"; you can call them anything you like, such as +"read_ptr" and "write_ptr". Look at pngtest.c, for example. + + png_structp png_ptr = png_create_write_struct + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn); + if (!png_ptr) + return (ERROR); + + png_infop info_ptr = png_create_info_struct(png_ptr); + if (!info_ptr) + { + png_destroy_write_struct(&png_ptr, + (png_infopp)NULL); + return (ERROR); + } + +If you want to use your own memory allocation routines, +define PNG_USER_MEM_SUPPORTED and use +png_create_write_struct_2() instead of png_create_write_struct(): + + png_structp png_ptr = png_create_write_struct_2 + (PNG_LIBPNG_VER_STRING, (png_voidp)user_error_ptr, + user_error_fn, user_warning_fn, (png_voidp) + user_mem_ptr, user_malloc_fn, user_free_fn); + +After you have these structures, you will need to set up the +error handling. When libpng encounters an error, it expects to +longjmp() back to your routine. Therefore, you will need to call +setjmp() and pass the png_jmpbuf(png_ptr). If you +write the file from different routines, you will need to update +the png_jmpbuf(png_ptr) every time you enter a new routine that will +call a png_*() function. See your documentation of setjmp/longjmp +for your compiler for more information on setjmp/longjmp. See +the discussion on libpng error handling in the Customizing Libpng +section below for more information on the libpng error handling. + + if (setjmp(png_jmpbuf(png_ptr))) + { + png_destroy_write_struct(&png_ptr, &info_ptr); + fclose(fp); + return (ERROR); + } + ... + return; + +If you would rather avoid the complexity of setjmp/longjmp issues, +you can compile libpng with PNG_SETJMP_NOT_SUPPORTED, in which case +errors will result in a call to PNG_ABORT() which defaults to abort(). + +Now you need to set up the output code. The default for libpng is to +use the C function fwrite(). If you use this, you will need to pass a +valid FILE * in the function png_init_io(). Be sure that the file is +opened in binary mode. Again, if you wish to handle writing data in +another way, see the discussion on libpng I/O handling in the Customizing +Libpng section below. + + png_init_io(png_ptr, fp); + +Write callbacks + +At this point, you can set up a callback function that will be +called after each row has been written, which you can use to control +a progress meter or the like. It's demonstrated in pngtest.c. +You must supply a function + + void write_row_callback(png_ptr, png_uint_32 row, + int pass); + { + /* put your code here */ + } + +(You can give it another name that you like instead of "write_row_callback") + +To inform libpng about your function, use + + png_set_write_status_fn(png_ptr, write_row_callback); + +You now have the option of modifying how the compression library will +run. The following functions are mainly for testing, but may be useful +in some cases, like if you need to write PNG files extremely fast and +are willing to give up some compression, or if you want to get the +maximum possible compression at the expense of slower writing. If you +have no special needs in this area, let the library do what it wants by +not calling this function at all, as it has been tuned to deliver a good +speed/compression ratio. The second parameter to png_set_filter() is +the filter method, for which the only valid values are 0 (as of the +July 1999 PNG specification, version 1.2) or 64 (if you are writing +a PNG datastream that is to be embedded in a MNG datastream). The third +parameter is a flag that indicates which filter type(s) are to be tested +for each scanline. See the PNG specification for details on the specific filter +types. + + + /* turn on or off filtering, and/or choose + specific filters. You can use either a single + PNG_FILTER_VALUE_NAME or the logical OR of one + or more PNG_FILTER_NAME masks. */ + png_set_filter(png_ptr, 0, + PNG_FILTER_NONE | PNG_FILTER_VALUE_NONE | + PNG_FILTER_SUB | PNG_FILTER_VALUE_SUB | + PNG_FILTER_UP | PNG_FILTER_VALUE_UP | + PNG_FILTER_AVE | PNG_FILTER_VALUE_AVE | + PNG_FILTER_PAETH | PNG_FILTER_VALUE_PAETH| + PNG_ALL_FILTERS); + +If an application +wants to start and stop using particular filters during compression, +it should start out with all of the filters (to ensure that the previous +row of pixels will be stored in case it's needed later), and then add +and remove them after the start of compression. + +If you are writing a PNG datastream that is to be embedded in a MNG +datastream, the second parameter can be either 0 or 64. + +The png_set_compression_*() functions interface to the zlib compression +library, and should mostly be ignored unless you really know what you are +doing. The only generally useful call is png_set_compression_level() +which changes how much time zlib spends on trying to compress the image +data. See the Compression Library (zlib.h and algorithm.txt, distributed +with zlib) for details on the compression levels. + + /* set the zlib compression level */ + png_set_compression_level(png_ptr, + Z_BEST_COMPRESSION); + + /* set other zlib parameters */ + png_set_compression_mem_level(png_ptr, 8); + png_set_compression_strategy(png_ptr, + Z_DEFAULT_STRATEGY); + png_set_compression_window_bits(png_ptr, 15); + png_set_compression_method(png_ptr, 8); + png_set_compression_buffer_size(png_ptr, 8192) + +extern PNG_EXPORT(void,png_set_zbuf_size) + +Setting the contents of info for output + +You now need to fill in the png_info structure with all the data you +wish to write before the actual image. Note that the only thing you +are allowed to write after the image is the text chunks and the time +chunk (as of PNG Specification 1.2, anyway). See png_write_end() and +the latest PNG specification for more information on that. If you +wish to write them before the image, fill them in now, and flag that +data as being valid. If you want to wait until after the data, don't +fill them until png_write_end(). For all the fields in png_info and +their data types, see png.h. For explanations of what the fields +contain, see the PNG specification. + +Some of the more important parts of the png_info are: + + png_set_IHDR(png_ptr, info_ptr, width, height, + bit_depth, color_type, interlace_type, + compression_type, filter_method) + width - holds the width of the image + in pixels (up to 2^31). + height - holds the height of the image + in pixels (up to 2^31). + bit_depth - holds the bit depth of one of the + image channels. + (valid values are 1, 2, 4, 8, 16 + and depend also on the + color_type. See also significant + bits (sBIT) below). + color_type - describes which color/alpha + channels are present. + PNG_COLOR_TYPE_GRAY + (bit depths 1, 2, 4, 8, 16) + PNG_COLOR_TYPE_GRAY_ALPHA + (bit depths 8, 16) + PNG_COLOR_TYPE_PALETTE + (bit depths 1, 2, 4, 8) + PNG_COLOR_TYPE_RGB + (bit_depths 8, 16) + PNG_COLOR_TYPE_RGB_ALPHA + (bit_depths 8, 16) + + PNG_COLOR_MASK_PALETTE + PNG_COLOR_MASK_COLOR + PNG_COLOR_MASK_ALPHA + + interlace_type - PNG_INTERLACE_NONE or + PNG_INTERLACE_ADAM7 + compression_type - (must be + PNG_COMPRESSION_TYPE_DEFAULT) + filter_method - (must be PNG_FILTER_TYPE_DEFAULT + or, if you are writing a PNG to + be embedded in a MNG datastream, + can also be + PNG_INTRAPIXEL_DIFFERENCING) + + png_set_PLTE(png_ptr, info_ptr, palette, + num_palette); + palette - the palette for the file + (array of png_color) + num_palette - number of entries in the palette + + png_set_gAMA(png_ptr, info_ptr, gamma); + gamma - the gamma the image was created + at (PNG_INFO_gAMA) + + png_set_sRGB(png_ptr, info_ptr, srgb_intent); + srgb_intent - the rendering intent + (PNG_INFO_sRGB) The presence of + the sRGB chunk means that the pixel + data is in the sRGB color space. + This chunk also implies specific + values of gAMA and cHRM. Rendering + intent is the CSS-1 property that + has been defined by the International + Color Consortium + (http://www.color.org). + It can be one of + PNG_sRGB_INTENT_SATURATION, + PNG_sRGB_INTENT_PERCEPTUAL, + PNG_sRGB_INTENT_ABSOLUTE, or + PNG_sRGB_INTENT_RELATIVE. + + + png_set_sRGB_gAMA_and_cHRM(png_ptr, info_ptr, + srgb_intent); + srgb_intent - the rendering intent + (PNG_INFO_sRGB) The presence of the + sRGB chunk means that the pixel + data is in the sRGB color space. + This function also causes gAMA and + cHRM chunks with the specific values + that are consistent with sRGB to be + written. + + png_set_iCCP(png_ptr, info_ptr, name, compression_type, + profile, proflen); + name - The profile name. + compression - The compression type; always + PNG_COMPRESSION_TYPE_BASE for PNG 1.0. + You may give NULL to this argument to + ignore it. + profile - International Color Consortium color + profile data. May contain NULs. + proflen - length of profile data in bytes. + + png_set_sBIT(png_ptr, info_ptr, sig_bit); + sig_bit - the number of significant bits for + (PNG_INFO_sBIT) each of the gray, red, + green, and blue channels, whichever are + appropriate for the given color type + (png_color_16) + + png_set_tRNS(png_ptr, info_ptr, trans, num_trans, + trans_values); + trans - array of transparent entries for + palette (PNG_INFO_tRNS) + trans_values - graylevel or color sample values of + the single transparent color for + non-paletted images (PNG_INFO_tRNS) + num_trans - number of transparent entries + (PNG_INFO_tRNS) + + png_set_hIST(png_ptr, info_ptr, hist); + (PNG_INFO_hIST) + hist - histogram of palette (array of + png_uint_16) + + png_set_tIME(png_ptr, info_ptr, mod_time); + mod_time - time image was last modified + (PNG_VALID_tIME) + + png_set_bKGD(png_ptr, info_ptr, background); + background - background color (PNG_VALID_bKGD) + + png_set_text(png_ptr, info_ptr, text_ptr, num_text); + text_ptr - array of png_text holding image + comments + text_ptr[i].compression - type of compression used + on "text" PNG_TEXT_COMPRESSION_NONE + PNG_TEXT_COMPRESSION_zTXt + PNG_ITXT_COMPRESSION_NONE + PNG_ITXT_COMPRESSION_zTXt + text_ptr[i].key - keyword for comment. Must contain + 1-79 characters. + text_ptr[i].text - text comments for current + keyword. Can be NULL or empty. + text_ptr[i].text_length - length of text string, + after decompression, 0 for iTXt + text_ptr[i].itxt_length - length of itxt string, + after decompression, 0 for tEXt/zTXt + text_ptr[i].lang - language of comment (NULL or + empty for unknown). + text_ptr[i].translated_keyword - keyword in UTF-8 (NULL + or empty for unknown). + num_text - number of comments + + png_set_sPLT(png_ptr, info_ptr, &palette_ptr, + num_spalettes); + palette_ptr - array of png_sPLT_struct structures + to be added to the list of palettes + in the info structure. + num_spalettes - number of palette structures to be + added. + + png_set_oFFs(png_ptr, info_ptr, offset_x, offset_y, + unit_type); + offset_x - positive offset from the left + edge of the screen + offset_y - positive offset from the top + edge of the screen + unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER + + png_set_pHYs(png_ptr, info_ptr, res_x, res_y, + unit_type); + res_x - pixels/unit physical resolution + in x direction + res_y - pixels/unit physical resolution + in y direction + unit_type - PNG_RESOLUTION_UNKNOWN, + PNG_RESOLUTION_METER + + png_set_sCAL(png_ptr, info_ptr, unit, width, height) + unit - physical scale units (an integer) + width - width of a pixel in physical scale units + height - height of a pixel in physical scale units + (width and height are doubles) + + png_set_sCAL_s(png_ptr, info_ptr, unit, width, height) + unit - physical scale units (an integer) + width - width of a pixel in physical scale units + height - height of a pixel in physical scale units + (width and height are strings like "2.54") + + png_set_unknown_chunks(png_ptr, info_ptr, &unknowns, + num_unknowns) + unknowns - array of png_unknown_chunk + structures holding unknown chunks + unknowns[i].name - name of unknown chunk + unknowns[i].data - data of unknown chunk + unknowns[i].size - size of unknown chunk's data + unknowns[i].location - position to write chunk in file + 0: do not write chunk + PNG_HAVE_IHDR: before PLTE + PNG_HAVE_PLTE: before IDAT + PNG_AFTER_IDAT: after IDAT + +The "location" member is set automatically according to +what part of the output file has already been written. +You can change its value after calling png_set_unknown_chunks() +as demonstrated in pngtest.c. Within each of the "locations", +the chunks are sequenced according to their position in the +structure (that is, the value of "i", which is the order in which +the chunk was either read from the input file or defined with +png_set_unknown_chunks). + +A tquick word about text and num_text. text is an array of png_text +structures. num_text is the number of valid structures in the array. +Each png_text structure holds a language code, a keyword, a text value, +and a compression type. + +The compression types have the same valid numbers as the compression +types of the image data. Currently, the only valid number is zero. +However, you can store text either compressed or uncompressed, unlike +images, which always have to be compressed. So if you don't want the +text compressed, set the compression type to PNG_TEXT_COMPRESSION_NONE. +Because tEXt and zTXt chunks don't have a language field, if you +specify PNG_TEXT_COMPRESSION_NONE or PNG_TEXT_COMPRESSION_zTXt +any language code or translated keyword will not be written out. + +Until text gets around 1000 bytes, it is not worth compressing it. +After the text has been written out to the file, the compression type +is set to PNG_TEXT_COMPRESSION_NONE_WR or PNG_TEXT_COMPRESSION_zTXt_WR, +so that it isn't written out again at the end (in case you are calling +png_write_end() with the same struct. + +The keywords that are given in the PNG Specification are: + + Title Short (one line) title or + caption for image + Author Name of image's creator + Description Description of image (possibly long) + Copyright Copyright notice + Creation Time Time of original image creation + (usually RFC 1123 format, see below) + Software Software used to create the image + Disclaimer Legal disclaimer + Warning Warning of nature of content + Source Device used to create the image + Comment Miscellaneous comment; conversion + from other image format + +The keyword-text pairs work like this. Keywords should be short +simple descriptions of what the comment is about. Some typical +keywords are found in the PNG specification, as is some recommendations +on keywords. You can repeat keywords in a file. You can even write +some text before the image and some after. For example, you may want +to put a description of the image before the image, but leave the +disclaimer until after, so viewers working over modem connections +don't have to wait for the disclaimer to go over the modem before +they start seeing the image. Finally, keywords should be full +words, not abbreviations. Keywords and text are in the ISO 8859-1 +(Latin-1) character set (a superset of regular ASCII) and can not +contain NUL characters, and should not contain control or other +unprintable characters. To make the comments widely readable, stick +with basic ASCII, and avoid machine specific character set extensions +like the IBM-PC character set. The keyword must be present, but +you can leave off the text string on non-compressed pairs. +Compressed pairs must have a text string, as only the text string +is compressed anyway, so the compression would be meaningless. + +PNG supports modification time via the png_time structure. Two +conversion routines are provided, png_convert_from_time_t() for +time_t and png_convert_from_struct_tm() for struct tm. The +time_t routine uses gmtime(). You don't have to use either of +these, but if you wish to fill in the png_time structure directly, +you should provide the time in universal time (GMT) if possible +instead of your local time. Note that the year number is the full +year (e.g. 1998, rather than 98 - PNG is year 2000 compliant!), and +that months start with 1. + +If you want to store the time of the original image creation, you should +use a plain tEXt chunk with the "Creation Time" keyword. This is +necessary because the "creation time" of a PNG image is somewhat vague, +depending on whether you mean the PNG file, the time the image was +created in a non-PNG format, a still photo from which the image was +scanned, or possibly the subject matter itself. In order to facilitate +machine-readable dates, it is recommended that the "Creation Time" +tEXt chunk use RFC 1123 format dates (e.g. "22 May 1997 18:07:10 GMT"), +although this isn't a retquirement. Unlike the tIME chunk, the +"Creation Time" tEXt chunk is not expected to be automatically changed +by the software. To facilitate the use of RFC 1123 dates, a function +png_convert_to_rfc1123(png_timep) is provided to convert from PNG +time to an RFC 1123 format string. + +Writing unknown chunks + +You can use the png_set_unknown_chunks function to queue up chunks +for writing. You give it a chunk name, raw data, and a size; that's +all there is to it. The chunks will be written by the next following +png_write_info_before_PLTE, png_write_info, or png_write_end function. +Any chunks previously read into the info structure's unknown-chunk +list will also be written out in a sequence that satisfies the PNG +specification's ordering rules. + +The high-level write interface + +At this point there are two ways to proceed; through the high-level +write interface, or through a sequence of low-level write operations. +You can use the high-level interface if your image data is present +in the info structure. All defined output +transformations are permitted, enabled by the following masks. + + PNG_TRANSFORM_IDENTITY No transformation + PNG_TRANSFORM_PACKING Pack 1, 2 and 4-bit samples + PNG_TRANSFORM_PACKSWAP Change order of packed + pixels to LSB first + PNG_TRANSFORM_INVERT_MONO Invert monochrome images + PNG_TRANSFORM_SHIFT Normalize pixels to the + sBIT depth + PNG_TRANSFORM_BGR Flip RGB to BGR, RGBA + to BGRA + PNG_TRANSFORM_SWAP_ALPHA Flip RGBA to ARGB or GA + to AG + PNG_TRANSFORM_INVERT_ALPHA Change alpha from opacity + to transparency + PNG_TRANSFORM_SWAP_ENDIAN Byte-swap 16-bit samples + PNG_TRANSFORM_STRIP_FILLER Strip out filler bytes. + +If you have valid image data in the info structure (you can use +png_set_rows() to put image data in the info structure), simply do this: + + png_write_png(png_ptr, info_ptr, png_transforms, NULL) + +where png_transforms is an integer containing the logical OR of some set of +transformation flags. This call is equivalent to png_write_info(), +followed the set of transformations indicated by the transform mask, +then png_write_image(), and finally png_write_end(). + +(The final parameter of this call is not yet used. Someday it might point +to transformation parameters retquired by some future output transform.) + +The low-level write interface + +If you are going the low-level route instead, you are now ready to +write all the file information up to the actual image data. You do +this with a call to png_write_info(). + + png_write_info(png_ptr, info_ptr); + +Note that there is one transformation you may need to do before +png_write_info(). In PNG files, the alpha channel in an image is the +level of opacity. If your data is supplied as a level of +transparency, you can invert the alpha channel before you write it, so +that 0 is fully transparent and 255 (in 8-bit or paletted images) or +65535 (in 16-bit images) is fully opaque, with + + png_set_invert_alpha(png_ptr); + +This must appear before png_write_info() instead of later with the +other transformations because in the case of paletted images the tRNS +chunk data has to be inverted before the tRNS chunk is written. If +your image is not a paletted image, the tRNS data (which in such cases +represents a single color to be rendered as transparent) won't need to +be changed, and you can safely do this transformation after your +png_write_info() call. + +If you need to write a private chunk that you want to appear before +the PLTE chunk when PLTE is present, you can write the PNG info in +two steps, and insert code to write your own chunk between them: + + png_write_info_before_PLTE(png_ptr, info_ptr); + png_set_unknown_chunks(png_ptr, info_ptr, ...); + png_write_info(png_ptr, info_ptr); + +After you've written the file information, you can set up the library +to handle any special transformations of the image data. The various +ways to transform the data will be described in the order that they +should occur. This is important, as some of these change the color +type and/or bit depth of the data, and some others only work on +certain color types and bit depths. Even though each transformation +checks to see if it has data that it can do something with, you should +make sure to only enable a transformation if it will be valid for the +data. For example, don't swap red and blue on grayscale data. + +PNG files store RGB pixels packed into 3 or 6 bytes. This code tells +the library to strip input data that has 4 or 8 bytes per pixel down +to 3 or 6 bytes (or strip 2 or 4-byte grayscale+filler data to 1 or 2 +bytes per pixel). + + png_set_filler(png_ptr, 0, PNG_FILLER_BEFORE); + +where the 0 is unused, and the location is either PNG_FILLER_BEFORE or +PNG_FILLER_AFTER, depending upon whether the filler byte in the pixel +is stored XRGB or RGBX. + +PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as +they can, resulting in, for example, 8 pixels per byte for 1 bit files. +If the data is supplied at 1 pixel per byte, use this code, which will +correctly pack the pixels into a single byte: + + png_set_packing(png_ptr); + +PNG files reduce possible bit depths to 1, 2, 4, 8, and 16. If your +data is of another bit depth, you can write an sBIT chunk into the +file so that decoders can recover the original data if desired. + + /* Set the true bit depth of the image data */ + if (color_type & PNG_COLOR_MASK_COLOR) + { + sig_bit.red = true_bit_depth; + sig_bit.green = true_bit_depth; + sig_bit.blue = true_bit_depth; + } + else + { + sig_bit.gray = true_bit_depth; + } + if (color_type & PNG_COLOR_MASK_ALPHA) + { + sig_bit.alpha = true_bit_depth; + } + + png_set_sBIT(png_ptr, info_ptr, &sig_bit); + +If the data is stored in the row buffer in a bit depth other than +one supported by PNG (e.g. 3 bit data in the range 0-7 for a 4-bit PNG), +this will scale the values to appear to be the correct bit depth as +is retquired by PNG. + + png_set_shift(png_ptr, &sig_bit); + +PNG files store 16 bit pixels in network byte order (big-endian, +ie. most significant bits first). This code would be used if they are +supplied the other way (little-endian, i.e. least significant bits +first, the way PCs store them): + + if (bit_depth > 8) + png_set_swap(png_ptr); + +If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you +need to change the order the pixels are packed into bytes, you can use: + + if (bit_depth < 8) + png_set_packswap(png_ptr); + +PNG files store 3 color pixels in red, green, blue order. This code +would be used if they are supplied as blue, green, red: + + png_set_bgr(png_ptr); + +PNG files describe monochrome as black being zero and white being +one. This code would be used if the pixels are supplied with this reversed +(black being one and white being zero): + + png_set_invert_mono(png_ptr); + +Finally, you can write your own transformation function if none of +the existing ones meets your needs. This is done by setting a callback +with + + png_set_write_user_transform_fn(png_ptr, + write_transform_fn); + +You must supply the function + + void write_transform_fn(png_ptr ptr, row_info_ptr + row_info, png_bytep data) + +See pngtest.c for a working example. Your function will be called +before any of the other transformations are processed. + +You can also set up a pointer to a user structure for use by your +callback function. + + png_set_user_transform_info(png_ptr, user_ptr, 0, 0); + +The user_channels and user_depth parameters of this function are ignored +when writing; you can set them to zero as shown. + +You can retrieve the pointer via the function png_get_user_transform_ptr(). +For example: + + voidp write_user_transform_ptr = + png_get_user_transform_ptr(png_ptr); + +It is possible to have libpng flush any pending output, either manually, +or automatically after a certain number of lines have been written. To +flush the output stream a single time call: + + png_write_flush(png_ptr); + +and to have libpng flush the output stream periodically after a certain +number of scanlines have been written, call: + + png_set_flush(png_ptr, nrows); + +Note that the distance between rows is from the last time png_write_flush() +was called, or the first row of the image if it has never been called. +So if you write 50 lines, and then png_set_flush 25, it will flush the +output on the next scanline, and every 25 lines thereafter, unless +png_write_flush() is called before 25 more lines have been written. +If nrows is too small (less than about 10 lines for a 640 pixel wide +RGB image) the image compression may decrease noticeably (although this +may be acceptable for real-time applications). Infrequent flushing will +only degrade the compression performance by a few percent over images +that do not use flushing. + +Writing the image data + +That's it for the transformations. Now you can write the image data. +The simplest way to do this is in one function call. If you have the +whole image in memory, you can just call png_write_image() and libpng +will write the image. You will need to pass in an array of pointers to +each row. This function automatically handles interlacing, so you don't +need to call png_set_interlace_handling() or call this function multiple +times, or any of that other stuff necessary with png_write_rows(). + + png_write_image(png_ptr, row_pointers); + +where row_pointers is: + + png_byte *row_pointers[height]; + +You can point to void or char or whatever you use for pixels. + +If you don't want to write the whole image at once, you can +use png_write_rows() instead. If the file is not interlaced, +this is simple: + + png_write_rows(png_ptr, row_pointers, + number_of_rows); + +row_pointers is the same as in the png_write_image() call. + +If you are just writing one row at a time, you can do this with +a single row_pointer instead of an array of row_pointers: + + png_bytep row_pointer = row; + + png_write_row(png_ptr, row_pointer); + +When the file is interlaced, things can get a good deal more +complicated. The only currently (as of the PNG Specification +version 1.2, dated July 1999) defined interlacing scheme for PNG files +is the "Adam7" interlace scheme, that breaks down an +image into seven smaller images of varying size. libpng will build +these images for you, or you can do them yourself. If you want to +build them yourself, see the PNG specification for details of which +pixels to write when. + +If you don't want libpng to handle the interlacing details, just +use png_set_interlace_handling() and call png_write_rows() the +correct number of times to write all seven sub-images. + +If you want libpng to build the sub-images, call this before you start +writing any rows: + + number_of_passes = + png_set_interlace_handling(png_ptr); + +This will return the number of passes needed. Currently, this +is seven, but may change if another interlace type is added. + +Then write the complete image number_of_passes times. + + png_write_rows(png_ptr, row_pointers, + number_of_rows); + +As some of these rows are not used, and thus return immediately, +you may want to read about interlacing in the PNG specification, +and only update the rows that are actually used. + +Finishing a sequential write + +After you are finished writing the image, you should finish writing +the file. If you are interested in writing comments or time, you should +pass an appropriately filled png_info pointer. If you are not interested, +you can pass NULL. + + png_write_end(png_ptr, info_ptr); + +When you are done, you can free all memory used by libpng like this: + + png_destroy_write_struct(&png_ptr, &info_ptr); + +It is also possible to individually free the info_ptr members that +point to libpng-allocated storage with the following function: + + png_free_data(png_ptr, info_ptr, mask, seq) + mask - identifies data to be freed, a mask + containing the logical OR of one or + more of + PNG_FREE_PLTE, PNG_FREE_TRNS, + PNG_FREE_HIST, PNG_FREE_ICCP, + PNG_FREE_PCAL, PNG_FREE_ROWS, + PNG_FREE_SCAL, PNG_FREE_SPLT, + PNG_FREE_TEXT, PNG_FREE_UNKN, + or simply PNG_FREE_ALL + seq - sequence number of item to be freed + (-1 for all items) + +This function may be safely called when the relevant storage has +already been freed, or has not yet been allocated, or was allocated +by the user and not by libpng, and will in those +cases do nothing. The "seq" parameter is ignored if only one item +of the selected data type, such as PLTE, is allowed. If "seq" is not +-1, and multiple items are allowed for the data type identified in +the mask, such as text or sPLT, only the n'th item in the structure +is freed, where n is "seq". + +If you allocated data such as a palette that you passed +in to libpng with png_set_*, you must not free it until just before the call to +png_destroy_write_struct(). + +The default behavior is only to free data that was allocated internally +by libpng. This can be changed, so that libpng will not free the data, +or so that it will free data that was allocated by the user with png_malloc() +or png_zalloc() and passed in via a png_set_*() function, with + + png_data_freer(png_ptr, info_ptr, freer, mask) + mask - which data elements are affected + same choices as in png_free_data() + freer - one of + PNG_DESTROY_WILL_FREE_DATA + PNG_SET_WILL_FREE_DATA + PNG_USER_WILL_FREE_DATA + +For example, to transfer responsibility for some data from a read structure +to a write structure, you could use + + png_data_freer(read_ptr, read_info_ptr, + PNG_USER_WILL_FREE_DATA, + PNG_FREE_PLTE|PNG_FREE_tRNS|PNG_FREE_hIST) + png_data_freer(write_ptr, write_info_ptr, + PNG_DESTROY_WILL_FREE_DATA, + PNG_FREE_PLTE|PNG_FREE_tRNS|PNG_FREE_hIST) + +thereby briefly reassigning responsibility for freeing to the user but +immediately afterwards reassigning it once more to the write_destroy +function. Having done this, it would then be safe to destroy the read +structure and continue to use the PLTE, tRNS, and hIST data in the write +structure. + +This function only affects data that has already been allocated. +You can call this function before calling after the png_set_*() functions +to control whether the user or png_destroy_*() is supposed to free the data. +When the user assumes responsibility for libpng-allocated data, the +application must use +png_free() to free it, and when the user transfers responsibility to libpng +for data that the user has allocated, the user must have used png_malloc() +or png_zalloc() to allocate it. + +If you allocated text_ptr.text, text_ptr.lang, and text_ptr.translated_keyword +separately, do not transfer responsibility for freeing text_ptr to libpng, +because when libpng fills a png_text structure it combines these members with +the key member, and png_free_data() will free only text_ptr.key. Similarly, +if you transfer responsibility for free'ing text_ptr from libpng to your +application, your application must not separately free those members. +For a more compact example of writing a PNG image, see the file example.c. + +V. Modifying/Customizing libpng: + +There are three issues here. The first is changing how libpng does +standard things like memory allocation, input/output, and error handling. +The second deals with more complicated things like adding new chunks, +adding new transformations, and generally changing how libpng works. +Both of those are compile-time issues; that is, they are generally +determined at the time the code is written, and there is rarely a need +to provide the user with a means of changing them. The third is a +run-time issue: choosing between and/or tuning one or more alternate +versions of computationally intensive routines; specifically, optimized +assembly-language (and therefore compiler- and platform-dependent) +versions. + +Memory allocation, input/output, and error handling + +All of the memory allocation, input/output, and error handling in libpng +goes through callbacks that are user-settable. The default routines are +in pngmem.c, pngrio.c, pngwio.c, and pngerror.c, respectively. To change +these functions, call the appropriate png_set_*_fn() function. + +Memory allocation is done through the functions png_malloc() +and png_free(). These currently just call the standard C functions. If +your pointers can't access more then 64K at a time, you will want to set +MAXSEG_64K in zlib.h. Since it is unlikely that the method of handling +memory allocation on a platform will change between applications, these +functions must be modified in the library at compile time. If you prefer +to use a different method of allocating and freeing data, you can use +png_create_read_struct_2() or png_create_write_struct_2() to register +your own functions as described above. + +These functions also provide a void pointer that can be retrieved via + + mem_ptr=png_get_mem_ptr(png_ptr); + +Your replacement memory functions must have prototypes as follows: + + png_voidp malloc_fn(png_structp png_ptr, + png_size_t size); + void free_fn(png_structp png_ptr, png_voidp ptr); + +Your malloc_fn() should return NULL in case of failure. The png_malloc() +function will call png_error() if it receives a NULL from the system +memory allocator or from your replacement malloc_fn(). + +Input/Output in libpng is done through png_read() and png_write(), +which currently just call fread() and fwrite(). The FILE * is stored in +png_struct and is initialized via png_init_io(). If you wish to change +the method of I/O, the library supplies callbacks that you can set +through the function png_set_read_fn() and png_set_write_fn() at run +time, instead of calling the png_init_io() function. These functions +also provide a void pointer that can be retrieved via the function +png_get_io_ptr(). For example: + + png_set_read_fn(png_structp read_ptr, + voidp read_io_ptr, png_rw_ptr read_data_fn) + + png_set_write_fn(png_structp write_ptr, + voidp write_io_ptr, png_rw_ptr write_data_fn, + png_flush_ptr output_flush_fn); + + voidp read_io_ptr = png_get_io_ptr(read_ptr); + voidp write_io_ptr = png_get_io_ptr(write_ptr); + +The replacement I/O functions must have prototypes as follows: + + void user_read_data(png_structp png_ptr, + png_bytep data, png_size_t length); + void user_write_data(png_structp png_ptr, + png_bytep data, png_size_t length); + void user_flush_data(png_structp png_ptr); + +Supplying NULL for the read, write, or flush functions sets them back +to using the default C stream functions. It is an error to read from +a write stream, and vice versa. + +Error handling in libpng is done through png_error() and png_warning(). +Errors handled through png_error() are fatal, meaning that png_error() +should never return to its caller. Currently, this is handled via +setjmp() and longjmp() (unless you have compiled libpng with +PNG_SETJMP_NOT_SUPPORTED, in which case it is handled via PNG_ABORT()), +but you could change this to do things like exit() if you should wish. + +On non-fatal errors, png_warning() is called +to print a warning message, and then control returns to the calling code. +By default png_error() and png_warning() print a message on stderr via +fprintf() unless the library is compiled with PNG_NO_CONSOLE_IO defined +(because you don't want the messages) or PNG_NO_STDIO defined (because +fprintf() isn't available). If you wish to change the behavior of the error +functions, you will need to set up your own message callbacks. These +functions are normally supplied at the time that the png_struct is created. +It is also possible to redirect errors and warnings to your own replacement +functions after png_create_*_struct() has been called by calling: + + png_set_error_fn(png_structp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warning_fn); + + png_voidp error_ptr = png_get_error_ptr(png_ptr); + +If NULL is supplied for either error_fn or warning_fn, then the libpng +default function will be used, calling fprintf() and/or longjmp() if a +problem is encountered. The replacement error functions should have +parameters as follows: + + void user_error_fn(png_structp png_ptr, + png_const_charp error_msg); + void user_warning_fn(png_structp png_ptr, + png_const_charp warning_msg); + +The motivation behind using setjmp() and longjmp() is the C++ throw and +catch exception handling methods. This makes the code much easier to write, +as there is no need to check every return code of every function call. +However, there are some uncertainties about the status of local variables +after a longjmp, so the user may want to be careful about doing anything after +setjmp returns non-zero besides returning itself. Consult your compiler +documentation for more details. For an alternative approach, you may wish +to use the "cexcept" facility (see http://cexcept.sourceforge.net). + +Custom chunks + +If you need to read or write custom chunks, you may need to get deeper +into the libpng code. The library now has mechanisms for storing +and writing chunks of unknown type; you can even declare callbacks +for custom chunks. Hoewver, this may not be good enough if the +library code itself needs to know about interactions between your +chunk and existing `intrinsic' chunks. + +If you need to write a new intrinsic chunk, first read the PNG +specification. Actquire a first level of +understanding of how it works. Pay particular attention to the +sections that describe chunk names, and look at how other chunks were +designed, so you can do things similarly. Second, check out the +sections of libpng that read and write chunks. Try to find a chunk +that is similar to yours and use it as a template. More details can +be found in the comments inside the code. It is best to handle unknown +chunks in a generic method, via callback functions, instead of by +modifying libpng functions. + +If you wish to write your own transformation for the data, look through +the part of the code that does the transformations, and check out some of +the simpler ones to get an idea of how they work. Try to find a similar +transformation to the one you want to add and copy off of it. More details +can be found in the comments inside the code itself. + +Configuring for 16 bit platforms + +You will want to look into zconf.h to tell zlib (and thus libpng) that +it cannot allocate more then 64K at a time. Even if you can, the memory +won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K. + +Configuring for DOS + +For DOS users who only have access to the lower 640K, you will +have to limit zlib's memory usage via a png_set_compression_mem_level() +call. See zlib.h or zconf.h in the zlib library for more information. + +Configuring for Medium Model + +Libpng's support for medium model has been tested on most of the popular +compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets +defined, and FAR gets defined to far in pngconf.h, and you should be +all set. Everything in the library (except for zlib's structure) is +expecting far data. You must use the typedefs with the p or pp on +the end for pointers (or at least look at them and be careful). Make +note that the rows of data are defined as png_bytepp, which is an +unsigned char far * far *. + +Configuring for gui/windowing platforms: + +You will need to write new error and warning functions that use the GUI +interface, as described previously, and set them to be the error and +warning functions at the time that png_create_*_struct() is called, +in order to have them available during the structure initialization. +They can be changed later via png_set_error_fn(). On some compilers, +you may also have to change the memory allocators (png_malloc, etc.). + +Configuring for compiler xxx: + +All includes for libpng are in pngconf.h. If you need to add/change/delete +an include, this is the place to do it. The includes that are not +needed outside libpng are protected by the PNG_INTERNAL definition, +which is only defined for those routines inside libpng itself. The +files in libpng proper only include png.h, which includes pngconf.h. + +Configuring zlib: + +There are special functions to configure the compression. Perhaps the +most useful one changes the compression level, which currently uses +input compression values in the range 0 - 9. The library normally +uses the default compression level (Z_DEFAULT_COMPRESSION = 6). Tests +have shown that for a large majority of images, compression values in +the range 3-6 compress nearly as well as higher levels, and do so much +faster. For online applications it may be desirable to have maximum speed +(Z_BEST_SPEED = 1). With versions of zlib after v0.99, you can also +specify no compression (Z_NO_COMPRESSION = 0), but this would create +files larger than just storing the raw bitmap. You can specify the +compression level by calling: + + png_set_compression_level(png_ptr, level); + +Another useful one is to reduce the memory level used by the library. +The memory level defaults to 8, but it can be lowered if you are +short on memory (running DOS, for example, where you only have 640K). +Note that the memory level does have an effect on compression; among +other things, lower levels will result in sections of incompressible +data being emitted in smaller stored blocks, with a correspondingly +larger relative overhead of up to 15% in the worst case. + + png_set_compression_mem_level(png_ptr, level); + +The other functions are for configuring zlib. They are not recommended +for normal use and may result in writing an invalid PNG file. See +zlib.h for more information on what these mean. + + png_set_compression_strategy(png_ptr, + strategy); + png_set_compression_window_bits(png_ptr, + window_bits); + png_set_compression_method(png_ptr, method); + png_set_compression_buffer_size(png_ptr, size); + +Controlling row filtering + +If you want to control whether libpng uses filtering or not, which +filters are used, and how it goes about picking row filters, you +can call one of these functions. The selection and configuration +of row filters can have a significant impact on the size and +encoding speed and a somewhat lesser impact on the decoding speed +of an image. Filtering is enabled by default for RGB and grayscale +images (with and without alpha), but not for paletted images nor +for any images with bit depths less than 8 bits/pixel. + +The 'method' parameter sets the main filtering method, which is +currently only '0' in the PNG 1.2 specification. The 'filters' +parameter sets which filter(s), if any, should be used for each +scanline. Possible values are PNG_ALL_FILTERS and PNG_NO_FILTERS +to turn filtering on and off, respectively. + +Individual filter types are PNG_FILTER_NONE, PNG_FILTER_SUB, +PNG_FILTER_UP, PNG_FILTER_AVG, PNG_FILTER_PAETH, which can be bitwise +ORed together with '|' to specify one or more filters to use. +These filters are described in more detail in the PNG specification. +If you intend to change the filter type during the course of writing +the image, you should start with flags set for all of the filters +you intend to use so that libpng can initialize its internal +structures appropriately for all of the filter types. (Note that this +means the first row must always be adaptively filtered, because libpng +currently does not allocate the filter buffers until png_write_row() +is called for the first time.) + + filters = PNG_FILTER_NONE | PNG_FILTER_SUB + PNG_FILTER_UP | PNG_FILTER_AVE | + PNG_FILTER_PAETH | PNG_ALL_FILTERS; + + png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE, + filters); + The second parameter can also be + PNG_INTRAPIXEL_DIFFERENCING if you are + writing a PNG to be embedded in a MNG + datastream. This parameter must be the + same as the value of filter_method used + in png_set_IHDR(). + +It is also possible to influence how libpng chooses from among the +available filters. This is done in one or both of two ways - by +telling it how important it is to keep the same filter for successive +rows, and by telling it the relative computational costs of the filters. + + double weights[3] = {1.5, 1.3, 1.1}, + costs[PNG_FILTER_VALUE_LAST] = + {1.0, 1.3, 1.3, 1.5, 1.7}; + + png_set_filter_heuristics(png_ptr, + PNG_FILTER_HEURISTIC_WEIGHTED, 3, + weights, costs); + +The weights are multiplying factors that indicate to libpng that the +row filter should be the same for successive rows unless another row filter +is that many times better than the previous filter. In the above example, +if the previous 3 filters were SUB, SUB, NONE, the SUB filter could have a +"sum of absolute differences" 1.5 x 1.3 times higher than other filters +and still be chosen, while the NONE filter could have a sum 1.1 times +higher than other filters and still be chosen. Unspecified weights are +taken to be 1.0, and the specified weights should probably be declining +like those above in order to emphasize recent filters over older filters. + +The filter costs specify for each filter type a relative decoding cost +to be considered when selecting row filters. This means that filters +with higher costs are less likely to be chosen over filters with lower +costs, unless their "sum of absolute differences" is that much smaller. +The costs do not necessarily reflect the exact computational speeds of +the various filters, since this would unduly influence the final image +size. + +Note that the numbers above were invented purely for this example and +are given only to help explain the function usage. Little testing has +been done to find optimum values for either the costs or the weights. + +Removing unwanted object code + +There are a bunch of #define's in pngconf.h that control what parts of +libpng are compiled. All the defines end in _SUPPORTED. If you are +never going to use a capability, you can change the #define to #undef +before recompiling libpng and save yourself code and data space, or +you can turn off individual capabilities with defines that begin with +PNG_NO_. + +You can also turn all of the transforms and ancillary chunk capabilities +off en masse with compiler directives that define +PNG_NO_READ[or WRITE]_TRANSFORMS, or PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS, +or all four, +along with directives to turn on any of the capabilities that you do +want. The PNG_NO_READ[or WRITE]_TRANSFORMS directives disable +the extra transformations but still leave the library fully capable of reading +and writing PNG files with all known public chunks +Use of the PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS directive +produces a library that is incapable of reading or writing ancillary chunks. +If you are not using the progressive reading capability, you can +turn that off with PNG_NO_PROGRESSIVE_READ (don't confuse +this with the INTERLACING capability, which you'll still have). + +All the reading and writing specific code are in separate files, so the +linker should only grab the files it needs. However, if you want to +make sure, or if you are building a stand alone library, all the +reading files start with pngr and all the writing files start with +pngw. The files that don't match either (like png.c, pngtrans.c, etc.) +are used for both reading and writing, and always need to be included. +The progressive reader is in pngpread.c + +If you are creating or distributing a dynamically linked library (a .so +or DLL file), you should not remove or disable any parts of the library, +as this will cause applications linked with different versions of the +library to fail if they call functions not available in your library. +The size of the library itself should not be an issue, because only +those sections that are actually used will be loaded into memory. + +Requesting debug printout + +The macro definition PNG_DEBUG can be used to request debugging +printout. Set it to an integer value in the range 0 to 3. Higher +numbers result in increasing amounts of debugging information. The +information is printed to the "stderr" file, unless another file +name is specified in the PNG_DEBUG_FILE macro definition. + +When PNG_DEBUG > 0, the following functions (macros) become available: + + png_debug(level, message) + png_debug1(level, message, p1) + png_debug2(level, message, p1, p2) + +in which "level" is compared to PNG_DEBUG to decide whether to print +the message, "message" is the formatted string to be printed, +and p1 and p2 are parameters that are to be embedded in the string +according to printf-style formatting directives. For example, + + png_debug1(2, "foo=%d\n", foo); + +is expanded to + + if(PNG_DEBUG > 2) + fprintf(PNG_DEBUG_FILE, "foo=%d\n", foo); + +When PNG_DEBUG is defined but is zero, the macros aren't defined, but you +can still use PNG_DEBUG to control your own debugging: + + #ifdef PNG_DEBUG + fprintf(stderr, ... + #endif + +When PNG_DEBUG = 1, the macros are defined, but only png_debug statements +having level = 0 will be printed. There aren't any such statements in +this version of libpng, but if you insert some they will be printed. + +VI. Runtime optimization + +A new feature in libpng 1.2.0 is the ability to dynamically switch between +standard and optimized versions of some routines. Currently these are +limited to three computationally intensive tasks when reading PNG files: +decoding row filters, expanding interlacing, and combining interlaced or +transparent row data with previous row data. Currently the optimized +versions are available only for x86 (Intel, AMD, etc.) platforms with +MMX support, though this may change in future versions. (For example, +the non-MMX assembler optimizations for zlib might become similarly +runtime-selectable in future releases, in which case libpng could be +extended to support them. Alternatively, the compile-time choice of +floating-point versus integer routines for gamma correction might become +runtime-selectable.) + +Because such optimizations tend to be very platform- and compiler-dependent, +both in how they are written and in how they perform, the new runtime code +in libpng has been written to allow programs to query, enable, and disable +either specific optimizations or all such optimizations. For example, to +enable all possible optimizations (bearing in mind that some "optimizations" +may actually run more slowly in rare cases): + + #if defined(PNG_LIBPNG_VER) && (PNG_LIBPNG_VER >= 10200) + png_uint_32 mask, flags; + + flags = png_get_asm_flags(png_ptr); + mask = png_get_asm_flagmask(PNG_SELECT_READ | PNG_SELECT_WRITE); + png_set_asm_flags(png_ptr, flags | mask); + #endif + +To enable only optimizations relevant to reading PNGs, use PNG_SELECT_READ +by itself when calling png_get_asm_flagmask(); similarly for optimizing +only writing. To disable all optimizations: + + #if defined(PNG_LIBPNG_VER) && (PNG_LIBPNG_VER >= 10200) + flags = png_get_asm_flags(png_ptr); + mask = png_get_asm_flagmask(PNG_SELECT_READ | PNG_SELECT_WRITE); + png_set_asm_flags(png_ptr, flags & ~mask); + #endif + +To enable or disable only MMX-related features, use png_get_mmx_flagmask() +in place of png_get_asm_flagmask(). The mmx version takes one additional +parameter: + + #if defined(PNG_LIBPNG_VER) && (PNG_LIBPNG_VER >= 10200) + int selection = PNG_SELECT_READ | PNG_SELECT_WRITE; + int compilerID; + + mask = png_get_mmx_flagmask(selection, &compilerID); + #endif + +On return, compilerID will indicate which version of the MMX assembler +optimizations was compiled. Currently two flavors exist: Microsoft +Visual C++ (compilerID == 1) and GNU C (a.k.a. gcc/gas, compilerID == 2). +On non-x86 platforms or on systems compiled without MMX optimizations, a +value of -1 is used. + +Note that both png_get_asm_flagmask() and png_get_mmx_flagmask() return +all valid, settable optimization bits for the version of the library that's +currently in use. In the case of shared (dynamically linked) libraries, +this may include optimizations that did not exist at the time the code was +written and compiled. It is also possible, of course, to enable only known, +specific optimizations; for example: + + #if defined(PNG_LIBPNG_VER) && (PNG_LIBPNG_VER >= 10200) + flags = PNG_ASM_FLAG_MMX_READ_COMBINE_ROW \ + | PNG_ASM_FLAG_MMX_READ_INTERLACE \ + | PNG_ASM_FLAG_MMX_READ_FILTER_SUB \ + | PNG_ASM_FLAG_MMX_READ_FILTER_UP \ + | PNG_ASM_FLAG_MMX_READ_FILTER_AVG \ + | PNG_ASM_FLAG_MMX_READ_FILTER_PAETH ; + png_set_asm_flags(png_ptr, flags); + #endif + +This method would enable only the MMX read-optimizations available at the +time of libpng 1.2.0's release, regardless of whether a later version of +the DLL were actually being used. (Also note that these functions did not +exist in versions older than 1.2.0, so any attempt to run a dynamically +linked app on such an older version would fail.) + +To determine whether the processor supports MMX instructions at all, use +the png_mmx_support() function: + + #if defined(PNG_LIBPNG_VER) && (PNG_LIBPNG_VER >= 10200) + mmxsupport = png_mmx_support(); + #endif + +It returns -1 if MMX support is not compiled into libpng, 0 if MMX code +is compiled but MMX is not supported by the processor, or 1 if MMX support +is fully available. Note that png_mmx_support(), png_get_mmx_flagmask(), +and png_get_asm_flagmask() all may be called without allocating and ini- +tializing any PNG structures (for example, as part of a usage screen or +"about" box). + +The following code can be used to prevent an application from using the +thread_unsafe features, even if libpng was built with PNG_THREAD_UNSAFE_OK +defined: + +#if defined(PNG_USE_PNGGCCRD) && defined(PNG_ASSEMBLER_CODE_SUPPORTED) \ + && defined(PNG_THREAD_UNSAFE_OK) + /* Disable thread-unsafe features of pnggccrd */ + if (png_access_version() >= 10200) + { + png_uint_32 mmx_disable_mask = 0; + png_uint_32 asm_flags; + + mmx_disable_mask |= ( PNG_ASM_FLAG_MMX_READ_COMBINE_ROW \ + | PNG_ASM_FLAG_MMX_READ_FILTER_SUB \ + | PNG_ASM_FLAG_MMX_READ_FILTER_AVG \ + | PNG_ASM_FLAG_MMX_READ_FILTER_PAETH ); + asm_flags = png_get_asm_flags(png_ptr); + png_set_asm_flags(png_ptr, asm_flags & ~mmx_disable_mask); + } +#endif + +For more extensive examples of runtime querying, enabling and disabling +of optimized features, see contrib/gregbook/readpng2.c in the libpng +source-code distribution. + + +VII. MNG support + +The MNG specification (available at http://www.libpng.org/pub/mng) allows +certain extensions to PNG for PNG images that are embedded in MNG datastreams. +Libpng can support some of these extensions. To enable them, use the +png_permit_mng_features() function: + + feature_set = png_permit_mng_features(png_ptr, mask) + mask is a png_uint_32 containing the logical OR of the + features you want to enable. These include + PNG_FLAG_MNG_EMPTY_PLTE + PNG_FLAG_MNG_FILTER_64 + PNG_ALL_MNG_FEATURES + feature_set is a png_32_uint that is the logical AND of + your mask with the set of MNG features that is + supported by the version of libpng that you are using. + +It is an error to use this function when reading or writing a standalone +PNG file with the PNG 8-byte signature. The PNG datastream must be wrapped +in a MNG datastream. As a minimum, it must have the MNG 8-byte signature +and the MHDR and MEND chunks. Libpng does not provide support for these +or any other MNG chunks; your application must provide its own support for +them. You may wish to consider using libmng (available at +http://www.libmng.com) instead. + +VIII. Changes to Libpng from version 0.88 + +It should be noted that versions of libpng later than 0.96 are not +distributed by the original libpng author, Guy Schalnat, nor by +Andreas Dilger, who had taken over from Guy during 1996 and 1997, and +distributed versions 0.89 through 0.96, but rather by another member +of the original PNG Group, Glenn Randers-Pehrson. Guy and Andreas are +still alive and well, but they have moved on to other things. + +The old libpng functions png_read_init(), png_write_init(), +png_info_init(), png_read_destroy(), and png_write_destroy() have been +moved to PNG_INTERNAL in version 0.95 to discourage their use. These +functions will be removed from libpng version 2.0.0. + +The preferred method of creating and initializing the libpng structures is +via the png_create_read_struct(), png_create_write_struct(), and +png_create_info_struct() because they isolate the size of the structures +from the application, allow version error checking, and also allow the +use of custom error handling routines during the initialization, which +the old functions do not. The functions png_read_destroy() and +png_write_destroy() do not actually free the memory that libpng +allocated for these structs, but just reset the data structures, so they +can be used instead of png_destroy_read_struct() and +png_destroy_write_struct() if you feel there is too much system overhead +allocating and freeing the png_struct for each image read. + +Setting the error callbacks via png_set_message_fn() before +png_read_init() as was suggested in libpng-0.88 is no longer supported +because this caused applications that do not use custom error functions +to fail if the png_ptr was not initialized to zero. It is still possible +to set the error callbacks AFTER png_read_init(), or to change them with +png_set_error_fn(), which is essentially the same function, but with a new +name to force compilation errors with applications that try to use the old +method. + +Starting with version 1.0.7, you can find out which version of the library +you are using at run-time: + + png_uint_32 libpng_vn = png_access_version_number(); + +The number libpng_vn is constructed from the major version, minor +version with leading zero, and release number with leading zero, +(e.g., libpng_vn for version 1.0.7 is 10007). + +You can also check which version of png.h you used when compiling your +application: + + png_uint_32 application_vn = PNG_LIBPNG_VER; + +IX. Y2K Compliance in libpng + +October 3, 2002 + +Since the PNG Development group is an ad-hoc body, we can't make +an official declaration. + +This is your unofficial assurance that libpng from version 0.71 and +upward through 1.2.5 are Y2K compliant. It is my belief that earlier +versions were also Y2K compliant. + +Libpng only has three year fields. One is a 2-byte unsigned integer that +will hold years up to 65535. The other two hold the date in text +format, and will hold years up to 9999. + +The integer is + "png_uint_16 year" in png_time_struct. + +The strings are + "png_charp time_buffer" in png_struct and + "near_time_buffer", which is a local character string in png.c. + +There are seven time-related functions: + + png_convert_to_rfc_1123() in png.c + (formerly png_convert_to_rfc_1152() in error) + png_convert_from_struct_tm() in pngwrite.c, called + in pngwrite.c + png_convert_from_time_t() in pngwrite.c + png_get_tIME() in pngget.c + png_handle_tIME() in pngrutil.c, called in pngread.c + png_set_tIME() in pngset.c + png_write_tIME() in pngwutil.c, called in pngwrite.c + +All appear to handle dates properly in a Y2K environment. The +png_convert_from_time_t() function calls gmtime() to convert from system +clock time, which returns (year - 1900), which we properly convert to +the full 4-digit year. There is a possibility that applications using +libpng are not passing 4-digit years into the png_convert_to_rfc_1123() +function, or that they are incorrectly passing only a 2-digit year +instead of "year - 1900" into the png_convert_from_struct_tm() function, +but this is not under our control. The libpng documentation has always +stated that it works with 4-digit years, and the APIs have been +documented as such. + +The tIME chunk itself is also Y2K compliant. It uses a 2-byte unsigned +integer to hold the year, and can hold years as large as 65535. + +zlib, upon which libpng depends, is also Y2K compliant. It contains +no date-related code. + + + Glenn Randers-Pehrson + libpng maintainer + PNG Development Group |