Rename IO and network class nt* related files to equivalent tq*

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

1 files changed, 265 insertions, 0 deletions

diff --git a/src/kernel/tqsocketnotifier.cpp b/src/kernel/tqsocketnotifier.cpp
new file mode 100644
index 000000000..1a6390893
--- /dev/null
+++ b/src/kernel/tqsocketnotifier.cpp
@@ -0,0 +1,265 @@
+/****************************************************************************
+**
+** Implementation of TQSocketNotifier class
+**
+** Created : 951114
+**
+** Copyright (C) 1992-2008 Trolltech ASA.  All rights reserved.
+**
+** This file is part of the kernel module of the TQt GUI Toolkit.
+**
+** This file may be used under the terms of the GNU General
+** Public License versions 2.0 or 3.0 as published by the Free
+** Software Foundation and appearing in the files LICENSE.GPL2
+** and LICENSE.GPL3 included in the packaging of this file.
+** Alternatively you may (at your option) use any later version
+** of the GNU General Public License if such license has been
+** publicly approved by Trolltech ASA (or its successors, if any)
+** and the KDE Free TQt Foundation.
+**
+** Please review the following information to ensure GNU General
+** Public Licensing requirements will be met:
+** http://trolltech.com/products/qt/licenses/licensing/opensource/.
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
+** or contact the sales department at sales@trolltech.com.
+**
+** This file may be used under the terms of the Q Public License as
+** defined by Trolltech ASA and appearing in the file LICENSE.TQPL
+** included in the packaging of this file.  Licensees holding valid TQt
+** Commercial licenses may use this file in accordance with the TQt
+** Commercial License Agreement provided with the Software.
+**
+** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
+** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
+** herein.
+**
+**********************************************************************/
+
+#include "tqsocketnotifier.h"
+#include "ntqapplication.h"
+#include "ntqevent.h"
+#include "ntqeventloop.h"
+#include "qplatformdefs.h"
+
+#if defined(Q_OS_UNIX)
+#include <sys/types.h>
+#endif
+
+
+/*!
+    \class TQSocketNotifier tqsocketnotifier.h
+    \brief The TQSocketNotifier class provides support for socket callbacks.
+
+    \ingroup io
+
+    This class makes it possible to write asynchronous socket-based
+    code in TQt. Using synchronous socket operations blocks the
+    program, which is clearly not acceptable for an event-driven GUI
+    program.
+
+    Once you have opened a non-blocking socket (whether for TCP, UDP,
+    a UNIX-domain socket, or any other protocol family your operating
+    system supports), you can create a socket notifier to monitor the
+    socket. Then you connect the activated() signal to the slot you
+    want to be called when a socket event occurs.
+
+    Note for Windows users: the socket passed to TQSocketNotifier will
+    become non-blocking, even if it was created as a blocking socket.
+
+    There are three types of socket notifiers (read, write and
+    exception); you must specify one of these in the constructor.
+
+    The type specifies when the activated() signal is to be emitted:
+    \list 1
+    \i TQSocketNotifier::Read - There is data to be read (socket read event).
+    \i TQSocketNotifier::Write - Data can be written (socket write event).
+    \i TQSocketNofifier::Exception - An exception has occurred (socket
+    exception event). We recommend against using this.
+    \endlist
+
+    For example, if you need to monitor both reads and writes for the
+    same socket you must create two socket notifiers.
+
+    For read notifiers it makes little sense to connect the
+    activated() signal to more than one slot because the data can be
+    read from the socket only once.
+
+    Also observe that if you do not read all the available data when
+    the read notifier fires, it fires again and again.
+
+    For write notifiers, immediately disable the notifier after the
+    activated() signal has been received and you have sent the data to
+    be written on the socket. When you have more data to be written,
+    enable it again to get a new activated() signal. The exception is
+    if the socket data writing operation (send() or equivalent) fails
+    with a "would block" error, which means that some buffer is full
+    and you must wait before sending more data. In that case you do
+    not need to disable and re-enable the write notifier; it will fire
+    again as soon as the system allows more data to be sent.
+
+    The behavior of a write notifier that is left in enabled state
+    after having emitting the first activated() signal (and no "would
+    block" error has occurred) is undefined. Depending on the
+    operating system, it may fire on every pass of the event loop or
+    not at all.
+
+    If you need a time-out for your sockets you can use either \link
+    TQObject::startTimer() timer events\endlink or the TQTimer class.
+
+    Socket action is detected in the \link TQApplication::exec() main
+    event loop\endlink of TQt. The X11 version of TQt has a single UNIX
+    select() call that incorporates all socket notifiers and the X
+    socket.
+
+    Note that on XFree86 for OS/2, select() works only in the thread
+    in which main() is running; you should therefore use that thread
+    for GUI operations.
+
+    \sa TQSocket, TQServerSocket, TQSocketDevice, TQFile::handle()
+*/
+
+/*!
+    \enum TQSocketNotifier::Type
+
+    \value Read
+    \value Write
+    \value Exception
+*/
+
+
+/*!
+    Constructs a socket notifier called \a name, with the parent, \a
+    parent. It watches \a socket for \a type events, and enables it.
+
+    It is generally advisable to explicitly enable or disable the
+    socket notifier, especially for write notifiers.
+
+    \sa setEnabled(), isEnabled()
+*/
+
+TQSocketNotifier::TQSocketNotifier( int socket, Type type, TQObject *parent,
+				  const char *name )
+    : TQObject( parent, name )
+{
+#if defined(QT_CHECK_RANGE)
+    if ( socket < 0 )
+	tqWarning( "TQSocketNotifier: Invalid socket specified" );
+#  if defined(Q_OS_UNIX)
+    if ( socket >= FD_SETSIZE )
+	tqWarning( "TQSocketNotifier: Socket descriptor too large for select()" );
+#  endif
+#endif
+    sockfd = socket;
+    sntype = type;
+    snenabled = TRUE;
+    TQApplication::eventLoop()->registerSocketNotifier( this );
+}
+
+/*!
+    Destroys the socket notifier.
+*/
+
+TQSocketNotifier::~TQSocketNotifier()
+{
+    setEnabled( FALSE );
+}
+
+
+/*!
+    \fn void TQSocketNotifier::activated( int socket )
+
+    This signal is emitted under certain conditions specified by the
+    notifier type():
+    \list 1
+    \i TQSocketNotifier::Read - There is data to be read (socket read event).
+    \i TQSocketNotifier::Write - Data can be written (socket write event).
+    \i TQSocketNofifier::Exception - An exception has occurred (socket
+    exception event).
+    \endlist
+
+    The \a socket argument is the \link socket() socket\endlink identifier.
+
+    \sa type(), socket()
+*/
+
+
+/*!
+    \fn int TQSocketNotifier::socket() const
+
+    Returns the socket identifier specified to the constructor.
+
+    \sa type()
+*/
+
+/*!
+    \fn Type TQSocketNotifier::type() const
+
+    Returns the socket event type specified to the constructor: \c
+    TQSocketNotifier::Read, \c TQSocketNotifier::Write, or \c
+    TQSocketNotifier::Exception.
+
+    \sa socket()
+*/
+
+
+/*!
+    \fn bool TQSocketNotifier::isEnabled() const
+
+    Returns TRUE if the notifier is enabled; otherwise returns FALSE.
+
+    \sa setEnabled()
+*/
+
+/*!
+    Enables the notifier if \a enable is TRUE or disables it if \a
+    enable is FALSE.
+
+    The notifier is enabled by default.
+
+    If the notifier is enabled, it emits the activated() signal
+    whenever a socket event corresponding to its \link type()
+    type\endlink occurs. If it is disabled, it ignores socket events
+    (the same effect as not creating the socket notifier).
+
+    Write notifiers should normally be disabled immediately after the
+    activated() signal has been emitted; see discussion of write
+    notifiers in the \link #details class description\endlink above.
+
+    \sa isEnabled(), activated()
+*/
+
+void TQSocketNotifier::setEnabled( bool enable )
+{
+    if ( sockfd < 0 )
+	return;
+    if ( snenabled == enable )			// no change
+	return;
+    snenabled = enable;
+
+    TQEventLoop *eventloop = TQApplication::eventLoop();
+    if ( ! eventloop ) // perhaps application is shutting down
+	return;
+
+    if ( snenabled )
+	eventloop->registerSocketNotifier( this );
+    else
+	eventloop->unregisterSocketNotifier( this );
+}
+
+
+/*!\reimp
+*/
+bool TQSocketNotifier::event( TQEvent *e )
+{
+    // Emits the activated() signal when a \c TQEvent::SockAct is
+    // received.
+    TQObject::event( e );			// will activate filters
+    if ( e->type() == TQEvent::SockAct ) {
+	emit activated( sockfd );
+	return TRUE;
+    }
+    return FALSE;
+}