diff options
Diffstat (limited to 'src/3rdparty/libjpeg/jcmaster.c')
| -rw-r--r-- | src/3rdparty/libjpeg/jcmaster.c | 590 |
1 files changed, 590 insertions, 0 deletions
diff --git a/src/3rdparty/libjpeg/jcmaster.c b/src/3rdparty/libjpeg/jcmaster.c new file mode 100644 index 000000000..3b924912c --- /dev/null +++ b/src/3rdparty/libjpeg/jcmaster.c @@ -0,0 +1,590 @@ +/* + * jcmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG compressor. + * These routines are concerned with parameter validation, initial setup, + * and inter-pass control (determining the number of passes and the work + * to be done in each pass). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef enum { + main_pass, /* input data, also do first output step */ + huff_opt_pass, /* Huffman code optimization pass */ + output_pass /* data output pass */ +} c_pass_type; + +typedef struct { + struct jpeg_comp_master pub; /* public fields */ + + c_pass_type pass_type; /* the type of the current pass */ + + int pass_number; /* # of passes completed */ + int total_passes; /* total # of passes needed */ + + int scan_number; /* current index in scan_info[] */ +} my_comp_master; + +typedef my_comp_master * my_master_ptr; + + +/* + * Support routines that do various essential calculations. + */ + +LOCAL(void) +initial_setup (j_compress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ + int ci; + jpeg_component_info *compptr; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* Sanity check on image dimensions */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 + || cinfo->num_components <= 0 || cinfo->input_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Width of an input scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Fill in the correct component_index value; don't rely on application */ + compptr->component_index = ci; + /* For compression, we never do DCT scaling. */ + compptr->DCT_scaled_size = DCTSIZE; + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * DCTSIZE)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * DCTSIZE)); + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) cinfo->max_h_samp_factor); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) cinfo->max_v_samp_factor); + /* Mark component needed (this flag isn't actually used for compression) */ + compptr->component_needed = TRUE; + } + + /* Compute number of fully interleaved MCU rows (number of times that + * main controller will call coefficient controller). + */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor*DCTSIZE)); +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(void) +validate_script (j_compress_ptr cinfo) +/* Verify that the scan script in cinfo->scan_info[] is valid; also + * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. + */ +{ + const jpeg_scan_info * scanptr; + int scanno, ncomps, ci, coefi, thisi; + int Ss, Se, Ah, Al; + boolean component_sent[MAX_COMPONENTS]; +#ifdef C_PROGRESSIVE_SUPPORTED + int * last_bitpos_ptr; + int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; + /* -1 until that coefficient has been seen; then last Al for it */ +#endif + + if (cinfo->num_scans <= 0) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); + + /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; + * for progressive JPEG, no scan can have this. + */ + scanptr = cinfo->scan_info; + if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { +#ifdef C_PROGRESSIVE_SUPPORTED + cinfo->progressive_mode = TRUE; + last_bitpos_ptr = & last_bitpos[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (coefi = 0; coefi < DCTSIZE2; coefi++) + *last_bitpos_ptr++ = -1; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + for (ci = 0; ci < cinfo->num_components; ci++) + component_sent[ci] = FALSE; + } + + for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { + /* Validate component indexes */ + ncomps = scanptr->comps_in_scan; + if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (thisi < 0 || thisi >= cinfo->num_components) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + /* Components must appear in SOF order within each scan */ + if (ci > 0 && thisi <= scanptr->component_index[ci-1]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + } + /* Validate progression parameters */ + Ss = scanptr->Ss; + Se = scanptr->Se; + Ah = scanptr->Ah; + Al = scanptr->Al; + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that + * seems wrong: the upper bound ought to depend on data precision. + * Perhaps they really meant 0..N+1 for N-bit precision. + * Here we allow 0..10 for 8-bit data; Al larger than 10 results in + * out-of-range reconstructed DC values during the first DC scan, + * which might cause problems for some decoders. + */ +#if BITS_IN_JSAMPLE == 8 +#define MAX_AH_AL 10 +#else +#define MAX_AH_AL 13 +#endif + if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || + Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + if (Ss == 0) { + if (Se != 0) /* DC and AC together not OK */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + if (ncomps != 1) /* AC scans must be for only one component */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + for (ci = 0; ci < ncomps; ci++) { + last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; + if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + for (coefi = Ss; coefi <= Se; coefi++) { + if (last_bitpos_ptr[coefi] < 0) { + /* first scan of this coefficient */ + if (Ah != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + /* not first scan */ + if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + last_bitpos_ptr[coefi] = Al; + } + } +#endif + } else { + /* For sequential JPEG, all progression parameters must be these: */ + if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + /* Make sure components are not sent twice */ + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (component_sent[thisi]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + component_sent[thisi] = TRUE; + } + } + } + + /* Now verify that everything got sent. */ + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* For progressive mode, we only check that at least some DC data + * got sent for each component; the spec does not retquire that all bits + * of all coefficients be transmitted. Would it be wiser to enforce + * transmission of all coefficient bits?? + */ + for (ci = 0; ci < cinfo->num_components; ci++) { + if (last_bitpos[ci][0] < 0) + ERREXIT(cinfo, JERR_MISSING_DATA); + } +#endif + } else { + for (ci = 0; ci < cinfo->num_components; ci++) { + if (! component_sent[ci]) + ERREXIT(cinfo, JERR_MISSING_DATA); + } + } +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +LOCAL(void) +select_scan_parameters (j_compress_ptr cinfo) +/* Set up the scan parameters for the current scan */ +{ + int ci; + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (cinfo->scan_info != NULL) { + /* Prepare for current scan --- the script is already validated */ + my_master_ptr master = (my_master_ptr) cinfo->master; + const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; + + cinfo->comps_in_scan = scanptr->comps_in_scan; + for (ci = 0; ci < scanptr->comps_in_scan; ci++) { + cinfo->cur_comp_info[ci] = + &cinfo->comp_info[scanptr->component_index[ci]]; + } + cinfo->Ss = scanptr->Ss; + cinfo->Se = scanptr->Se; + cinfo->Ah = scanptr->Ah; + cinfo->Al = scanptr->Al; + } + else +#endif + { + /* Prepare for single sequential-JPEG scan containing all components */ + if (cinfo->num_components > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPS_IN_SCAN); + cinfo->comps_in_scan = cinfo->num_components; + for (ci = 0; ci < cinfo->num_components; ci++) { + cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; + } + cinfo->Ss = 0; + cinfo->Se = DCTSIZE2-1; + cinfo->Ah = 0; + cinfo->Al = 0; + } +} + + +LOCAL(void) +per_scan_setup (j_compress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = DCTSIZE; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, + (long) (cinfo->max_h_samp_factor*DCTSIZE)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor*DCTSIZE)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } + + /* Convert restart specified in rows to actual MCU count. */ + /* Note that count must fit in 16 bits, so we provide limiting. */ + if (cinfo->restart_in_rows > 0) { + long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; + cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); + } +} + + +/* + * Per-pass setup. + * This is called at the beginning of each pass. We determine which modules + * will be active during this pass and give them appropriate start_pass calls. + * We also set is_last_pass to indicate whether any more passes will be + * retquired. + */ + +METHODDEF(void) +prepare_for_pass (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + switch (master->pass_type) { + case main_pass: + /* Initial pass: will collect input data, and do either Huffman + * optimization or data output for the first scan. + */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (! cinfo->raw_data_in) { + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->downsample->start_pass) (cinfo); + (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); + } + (*cinfo->fdct->start_pass) (cinfo); + (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); + (*cinfo->coef->start_pass) (cinfo, + (master->total_passes > 1 ? + JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + if (cinfo->optimize_coding) { + /* No immediate data output; postpone writing frame/scan headers */ + master->pub.call_pass_startup = FALSE; + } else { + /* Will write frame/scan headers at first jpeg_write_scanlines call */ + master->pub.call_pass_startup = TRUE; + } + break; +#ifdef ENTROPY_OPT_SUPPORTED + case huff_opt_pass: + /* Do Huffman optimization for a scan after the first one. */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) { + (*cinfo->entropy->start_pass) (cinfo, TRUE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + master->pub.call_pass_startup = FALSE; + break; + } + /* Special case: Huffman DC refinement scans need no Huffman table + * and therefore we can skip the optimization pass for them. + */ + master->pass_type = output_pass; + master->pass_number++; + /*FALLTHROUGH*/ +#endif + case output_pass: + /* Do a data-output pass. */ + /* We need not repeat per-scan setup if prior optimization pass did it. */ + if (! cinfo->optimize_coding) { + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + } + (*cinfo->entropy->start_pass) (cinfo, FALSE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + /* We emit frame/scan headers now */ + if (master->scan_number == 0) + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); + master->pub.call_pass_startup = FALSE; + break; + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + } + + master->pub.is_last_pass = (master->pass_number == master->total_passes-1); + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->total_passes; + } +} + + +/* + * Special start-of-pass hook. + * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. + * In single-pass processing, we need this hook because we don't want to + * write frame/scan headers during jpeg_start_compress; we want to let the + * application write COM markers etc. between jpeg_start_compress and the + * jpeg_write_scanlines loop. + * In multi-pass processing, this routine is not used. + */ + +METHODDEF(void) +pass_startup (j_compress_ptr cinfo) +{ + cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ + + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); +} + + +/* + * Finish up at end of pass. + */ + +METHODDEF(void) +finish_pass_master (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* The entropy coder always needs an end-of-pass call, + * either to analyze statistics or to flush its output buffer. + */ + (*cinfo->entropy->finish_pass) (cinfo); + + /* Update state for next pass */ + switch (master->pass_type) { + case main_pass: + /* next pass is either output of scan 0 (after optimization) + * or output of scan 1 (if no optimization). + */ + master->pass_type = output_pass; + if (! cinfo->optimize_coding) + master->scan_number++; + break; + case huff_opt_pass: + /* next pass is always output of current scan */ + master->pass_type = output_pass; + break; + case output_pass: + /* next pass is either optimization or output of next scan */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + master->scan_number++; + break; + } + + master->pass_number++; +} + + +/* + * Initialize master compression control. + */ + +GLOBAL(void) +jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_comp_master)); + cinfo->master = (struct jpeg_comp_master *) master; + master->pub.prepare_for_pass = prepare_for_pass; + master->pub.pass_startup = pass_startup; + master->pub.finish_pass = finish_pass_master; + master->pub.is_last_pass = FALSE; + + /* Validate parameters, determine derived values */ + initial_setup(cinfo); + + if (cinfo->scan_info != NULL) { +#ifdef C_MULTISCAN_FILES_SUPPORTED + validate_script(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + cinfo->num_scans = 1; + } + + if (cinfo->progressive_mode) /* TEMPORARY HACK ??? */ + cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */ + + /* Initialize my private state */ + if (transcode_only) { + /* no main pass in transcoding */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + else + master->pass_type = output_pass; + } else { + /* for normal compression, first pass is always this type: */ + master->pass_type = main_pass; + } + master->scan_number = 0; + master->pass_number = 0; + if (cinfo->optimize_coding) + master->total_passes = cinfo->num_scans * 2; + else + master->total_passes = cinfo->num_scans; +} |