diff options
Diffstat (limited to 'src/kernel/tqlayout.cpp')
| -rw-r--r-- | src/kernel/tqlayout.cpp | 2601 |
1 files changed, 2601 insertions, 0 deletions
diff --git a/src/kernel/tqlayout.cpp b/src/kernel/tqlayout.cpp new file mode 100644 index 00000000..bfab6048 --- /dev/null +++ b/src/kernel/tqlayout.cpp @@ -0,0 +1,2601 @@ +/**************************************************************************** +** +** Implementation of layout classes +** +** Created : 960416 +** +** Copyright (C) 1992-2008 Trolltech ASA. All rights reserved. +** +** This file is part of the kernel module of the TQt GUI Toolkit. +** +** This file may be used under the terms of the GNU General +** Public License versions 2.0 or 3.0 as published by the Free +** Software Foundation and appearing in the files LICENSE.GPL2 +** and LICENSE.GPL3 included in the packaging of this file. +** Alternatively you may (at your option) use any later version +** of the GNU General Public License if such license has been +** publicly approved by Trolltech ASA (or its successors, if any) +** and the KDE Free TQt Foundation. +** +** Please review the following information to ensure GNU General +** Public Licensing requirements will be met: +** http://trolltech.com/products/qt/licenses/licensing/opensource/. +** If you are unsure which license is appropriate for your use, please +** review the following information: +** http://trolltech.com/products/qt/licenses/licensing/licensingoverview +** or contact the sales department at sales@trolltech.com. +** +** This file may be used under the terms of the Q Public License as +** defined by Trolltech ASA and appearing in the file LICENSE.TQPL +** included in the packaging of this file. Licensees holding valid TQt +** Commercial licenses may use this file in accordance with the TQt +** Commercial License Agreement provided with the Software. +** +** This file is provided "AS IS" with NO WARRANTY OF ANY KIND, +** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted +** herein. +** +**********************************************************************/ + +#include "tqlayout.h" + +#ifndef TQT_NO_LAYOUT + +#include "ntqapplication.h" +#include "tqwidget.h" +#include "tqptrlist.h" +#include "tqsizepolicy.h" + +#include "tqlayoutengine_p.h" + +/* + Three internal classes related to TQGridLayout: (1) TQGridBox is a + TQLayoutItem with (row, column) information; (2) TQGridMultiBox is a + TQGridBox with (torow, tocolumn) information; (3) TQGridLayoutData is + the internal representation of a TQGridLayout. +*/ + +class TQGridBox +{ +public: + TQGridBox( TQLayoutItem *lit ) { item_ = lit; } + + TQGridBox( TQWidget *wid ) { item_ = new TQWidgetItem( wid ); } + TQGridBox( int w, int h, TQSizePolicy::SizeType hData = TQSizePolicy::Minimum, + TQSizePolicy::SizeType vData = TQSizePolicy::Minimum ) + { item_ = new TQSpacerItem( w, h, hData, vData ); } + ~TQGridBox() { delete item_; } + + TQSize sizeHint() const { return item_->sizeHint(); } + TQSize minimumSize() const { return item_->minimumSize(); } + TQSize maximumSize() const { return item_->maximumSize(); } + TQSizePolicy::ExpandData expanding() const { return item_->expanding(); } + bool isEmpty() const { return item_->isEmpty(); } + + bool hasHeightForWidth() const { return item_->hasHeightForWidth(); } + int heightForWidth( int w ) const { return item_->heightForWidth(w); } + + void setAlignment( int a ) { item_->setAlignment( a ); } + void setGeometry( const TQRect &r ) { item_->setGeometry( r ); } + int alignment() const { return item_->alignment(); } + TQLayoutItem *item() { return item_; } + TQLayoutItem *takeItem() { TQLayoutItem *i = item_; item_ = 0; return i; } + + int hStretch() { return item_->widget() ? + item_->widget()->sizePolicy().horStretch() : 0; } + int vStretch() { return item_->widget() ? + item_->widget()->sizePolicy().verStretch() : 0; } + +private: + friend class TQGridLayoutData; + friend class TQGridLayoutDataIterator; + + TQLayoutItem *item_; + int row, col; +}; + +class TQGridMultiBox +{ +public: + TQGridMultiBox( TQGridBox *box, int toRow, int toCol ) + : box_( box ), torow( toRow ), tocol( toCol ) { } + ~TQGridMultiBox() { delete box_; } + TQGridBox *box() { return box_; } + TQLayoutItem *takeItem() { return box_->takeItem(); } + +private: + friend class TQGridLayoutData; + friend class TQGridLayoutDataIterator; + + TQGridBox *box_; + int torow, tocol; +}; + +class TQGridLayoutData +{ +public: + TQGridLayoutData(); + TQGridLayoutData( int nRows, int nCols ); + ~TQGridLayoutData(); + + void add( TQGridBox*, int row, int col ); + void add( TQGridBox*, int row1, int row2, int col1, int col2 ); + TQSize sizeHint( int ) const; + TQSize minimumSize( int ) const; + TQSize maximumSize( int ) const; + + TQSizePolicy::ExpandData expanding( int spacing ); + + void distribute( TQRect, int ); + inline int numRows() const { return rr; } + inline int numCols() const { return cc; } + inline void expand( int rows, int cols ) + { setSize( TQMAX(rows, rr), TQMAX(cols, cc) ); } + inline void setRowStretch( int r, int s ) + { expand( r + 1, 0 ); rStretch[r] = s; setDirty(); } + inline void setColStretch( int c, int s ) + { expand( 0, c + 1 ); cStretch[c] = s; setDirty(); } + inline int rowStretch( int r ) const { return rStretch[r]; } + inline int colStretch( int c ) const { return cStretch[c]; } + inline void setRowSpacing( int r, int s ) + { expand( r + 1, 0 ); rSpacing[r] = s; setDirty(); } + inline void setColSpacing( int c, int s ) + { expand( 0, c + 1 ); cSpacing[c] = s; setDirty(); } + inline int rowSpacing( int r ) const { return rSpacing[r]; } + inline int colSpacing( int c ) const { return cSpacing[c]; } + + inline void setReversed( bool r, bool c ) { hReversed = c; vReversed = r; } + inline bool horReversed() const { return hReversed; } + inline bool verReversed() const { return vReversed; } + inline void setDirty() { needRecalc = TRUE; hfw_width = -1; } + inline bool isDirty() const { return needRecalc; } + bool hasHeightForWidth( int space ); + int heightForWidth( int, int, int ); + int minimumHeightForWidth( int, int, int ); + + bool findWidget( TQWidget* w, int *row, int *col ); + + inline void getNextPos( int &row, int &col ) { row = nextR; col = nextC; } + inline uint count() const + { return things.count() + ( multi ? multi->count() : 0 ); } + TQRect cellGeometry( int row, int col ) const; + +private: + void setNextPosAfter( int r, int c ); + void recalcHFW( int w, int s ); + void addHfwData ( TQGridBox *box, int width ); + void init(); + TQSize findSize( TQCOORD TQLayoutStruct::*, int ) const; + void addData( TQGridBox *b, bool r = TRUE, bool c = TRUE ); + void setSize( int rows, int cols ); + void setupLayoutData( int space ); + void setupHfwLayoutData( int space ); + + int rr; + int cc; + TQMemArray<TQLayoutStruct> rowData; + TQMemArray<TQLayoutStruct> colData; + TQMemArray<TQLayoutStruct> *hfwData; + TQMemArray<int> rStretch; + TQMemArray<int> cStretch; + TQMemArray<int> rSpacing; + TQMemArray<int> cSpacing; + TQPtrList<TQGridBox> things; + TQPtrList<TQGridMultiBox> *multi; + + int hfw_width; + int hfw_height; + int hfw_minheight; + int nextR; + int nextC; + + uint hReversed : 1; + uint vReversed : 1; + uint needRecalc : 1; + uint has_hfw : 1; + uint addVertical : 1; + + friend class TQGridLayoutDataIterator; +}; + +TQGridLayoutData::TQGridLayoutData() +{ + init(); +} + +TQGridLayoutData::TQGridLayoutData( int nRows, int nCols ) + : rowData( 0 ), colData( 0 ) +{ + init(); + if ( nRows < 0 ) { + nRows = 1; + addVertical = FALSE; + } + if ( nCols < 0 ) { + nCols = 1; + addVertical = TRUE; + } + setSize( nRows, nCols ); +} + +TQGridLayoutData::~TQGridLayoutData() +{ + // must be cleared while the data is still in a stable state + things.clear(); + + delete multi; + delete hfwData; +} + +void TQGridLayoutData::init() +{ + addVertical = FALSE; + setDirty(); + multi = 0; + rr = cc = 0; + nextR = nextC = 0; + hfwData = 0; + things.setAutoDelete( TRUE ); + hReversed = FALSE; + vReversed = FALSE; +} + +bool TQGridLayoutData::hasHeightForWidth( int spacing ) +{ + setupLayoutData( spacing ); + return has_hfw; +} + +/* + Assumes that setupLayoutData() has been called, and that + qGeomCalc() has filled in colData with appropriate values. +*/ +void TQGridLayoutData::recalcHFW( int w, int spacing ) +{ + /* + Go through all children, using colData and heightForWidth() + and put the results in hfw_rowData. + */ + if ( !hfwData ) + hfwData = new TQMemArray<TQLayoutStruct>( rr ); + setupHfwLayoutData( spacing ); + TQMemArray<TQLayoutStruct> &rData = *hfwData; + + int h = 0; + int mh = 0; + int n = 0; + for ( int r = 0; r < rr; r++ ) { + h += rData[r].sizeHint; + mh += rData[r].minimumSize; + if ( !rData[r].empty ) + n++; + } + if ( n ) { + h += ( n - 1 ) * spacing; + mh += ( n - 1 ) * spacing; + } + + hfw_width = w; + hfw_height = TQMIN( TQLAYOUTSIZE_MAX, h ); + hfw_minheight = TQMIN( TQLAYOUTSIZE_MAX, mh ); +} + +int TQGridLayoutData::heightForWidth( int w, int margin, int spacing ) +{ + setupLayoutData( spacing ); + if ( !has_hfw ) + return -1; + if ( w + 2*margin != hfw_width ) { + qGeomCalc( colData, 0, cc, 0, w+2*margin, spacing ); + recalcHFW( w+2*margin, spacing ); + } + return hfw_height + 2*margin; +} + +int TQGridLayoutData::minimumHeightForWidth( int w, int margin, int spacing ) +{ + (void) heightForWidth( w, margin, spacing ); + return has_hfw ? (hfw_minheight + 2*margin) : -1; +} + +bool TQGridLayoutData::findWidget( TQWidget* w, int *row, int *col ) +{ + TQPtrListIterator<TQGridBox> it( things ); + TQGridBox * box; + while ( (box = it.current()) != 0 ) { + ++it; + if ( box->item()->widget() == w ) { + if ( row ) + *row = box->row; + if ( col ) + *col = box->col; + return TRUE; + } + } + if ( multi ) { + TQPtrListIterator<TQGridMultiBox> it( *multi ); + TQGridMultiBox * mbox; + while ( (mbox = it.current()) != 0 ) { + ++it; + box = mbox->box(); + if ( box->item()->widget() == w ) { + if ( row ) + *row = box->row; + if ( col ) + *col = box->col; + return TRUE; + } + + } + } + return FALSE; +} + +TQSize TQGridLayoutData::findSize( TQCOORD TQLayoutStruct::*size, int spacer ) const +{ + TQGridLayoutData *that = (TQGridLayoutData *)this; + that->setupLayoutData( spacer ); + + int w = 0; + int h = 0; + int n = 0; + for ( int r = 0; r < rr; r++ ) { + h = h + rowData[r].*size; + if ( !rowData[r].empty ) + n++; + } + if ( n ) + h += ( n - 1 ) * spacer; + n = 0; + for ( int c = 0; c < cc; c++ ) { + w = w + colData[c].*size; + if ( !colData[c].empty ) + n++; + } + if ( n ) + w += ( n - 1 ) * spacer; + w = TQMIN( TQLAYOUTSIZE_MAX, w ); + h = TQMIN( TQLAYOUTSIZE_MAX, h ); + + return TQSize( w, h ); +} + +TQSizePolicy::ExpandData TQGridLayoutData::expanding( int spacing ) +{ + setupLayoutData( spacing ); + int ret = 0; + + for ( int r = 0; r < rr; r++ ) { + if ( rowData[r].expansive ) { + ret |= (int) TQSizePolicy::Vertically; + break; + } + } + for ( int c = 0; c < cc; c++ ) { + if ( colData[c].expansive ) { + ret |= (int) TQSizePolicy::Horizontally; + break; + } + } + return (TQSizePolicy::ExpandData) ret; +} + +TQSize TQGridLayoutData::sizeHint( int spacer ) const +{ + return findSize( &TQLayoutStruct::sizeHint, spacer ); +} + +TQSize TQGridLayoutData::maximumSize( int spacer ) const +{ + return findSize( &TQLayoutStruct::maximumSize, spacer ); +} + +TQSize TQGridLayoutData::minimumSize( int spacer ) const +{ + return findSize( &TQLayoutStruct::minimumSize, spacer ); +} + +void TQGridLayoutData::setSize( int r, int c ) +{ + if ( (int)rowData.size() < r ) { + int newR = TQMAX( r, rr * 2 ); + rowData.resize( newR ); + rStretch.resize( newR ); + rSpacing.resize( newR ); + for ( int i = rr; i < newR; i++ ) { + rowData[i].init(); + rStretch[i] = 0; + rSpacing[i] = 0; + } + } + if ( (int)colData.size() < c ) { + int newC = TQMAX( c, cc * 2 ); + colData.resize( newC ); + cStretch.resize( newC ); + cSpacing.resize( newC ); + for ( int i = cc; i < newC; i++ ) { + colData[i].init(); + cStretch[i] = 0; + cSpacing[i] = 0; + } + } + + if ( hfwData && (int)hfwData->size() < r ) { + delete hfwData; + hfwData = 0; + hfw_width = -1; + } + rr = r; + cc = c; +} + +void TQGridLayoutData::setNextPosAfter( int row, int col ) +{ + if ( addVertical ) { + if ( (col > nextC) || ((col == nextC) && (row >= nextR)) ) { + nextR = row + 1; + nextC = col; + if ( nextR >= rr ) { + nextR = 0; + nextC++; + } + } + } else { + if ( (row > nextR) || ((row == nextR) && (col >= nextC)) ) { + nextR = row; + nextC = col + 1; + if ( nextC >= cc ) { + nextC = 0; + nextR++; + } + } + } +} + +void TQGridLayoutData::add( TQGridBox *box, int row, int col ) +{ + expand( row+1, col+1 ); + box->row = row; + box->col = col; + things.append( box ); + setDirty(); + setNextPosAfter( row, col ); +} + +void TQGridLayoutData::add( TQGridBox *box, int row1, int row2, int col1, + int col2 ) +{ +#ifdef QT_CHECK_RANGE + if ( row2 >= 0 && row2 < row1 ) + tqWarning( "TQGridLayout: Multi-cell fromRow greater than toRow" ); + if ( col2 >= 0 && col2 < col1 ) + tqWarning( "TQGridLayout: Multi-cell fromCol greater than toCol" ); +#endif + if ( row1 == row2 && col1 == col2 ) { + add( box, row1, col1 ); + return; + } + expand( row2+1, col2+1 ); + box->row = row1; + box->col = col1; + TQGridMultiBox *mbox = new TQGridMultiBox( box, row2, col2 ); + if ( !multi ) { + multi = new TQPtrList<TQGridMultiBox>; + multi->setAutoDelete( TRUE ); + } + multi->append( mbox ); + setDirty(); + if ( col2 < 0 ) + col2 = cc - 1; + + setNextPosAfter( row2, col2 ); +} + +void TQGridLayoutData::addData( TQGridBox *box, bool r, bool c ) +{ + TQSize hint = box->sizeHint(); + TQSize minS = box->minimumSize(); + TQSize maxS = box->maximumSize(); + + if ( c ) { + if ( !cStretch[box->col] ) + colData[box->col].stretch = TQMAX( colData[box->col].stretch, + box->hStretch() ); + colData[box->col].sizeHint = TQMAX( hint.width(), + colData[box->col].sizeHint ); + colData[box->col].minimumSize = TQMAX( minS.width(), + colData[box->col].minimumSize ); + + qMaxExpCalc( colData[box->col].maximumSize, colData[box->col].expansive, + maxS.width(), + box->expanding() & TQSizePolicy::Horizontally ); + } + if ( r ) { + if ( !rStretch[box->row] ) + rowData[box->row].stretch = TQMAX( rowData[box->row].stretch, + box->vStretch() ); + rowData[box->row].sizeHint = TQMAX( hint.height(), + rowData[box->row].sizeHint ); + rowData[box->row].minimumSize = TQMAX( minS.height(), + rowData[box->row].minimumSize ); + + qMaxExpCalc( rowData[box->row].maximumSize, rowData[box->row].expansive, + maxS.height(), + box->expanding() & TQSizePolicy::Vertically ); + } + if ( box->isEmpty() ) { + if ( box->item()->widget() != 0 ) { + /* + Hidden widgets should behave exactly the same as if + there were no widgets at all in the cell. We could have + TQWidgetItem::maximumSize() to return + TQSize(TQLAYOUTSIZE_MAX, TQLAYOUTSIZE_MAX). However, that + value is not suitable for TQBoxLayouts. So let's fix it + here. + */ + if ( c ) + colData[box->col].maximumSize = TQLAYOUTSIZE_MAX; + if ( r ) + rowData[box->row].maximumSize = TQLAYOUTSIZE_MAX; + } + } else { + // Empty boxes (i.e. spacers) do not get borders. This is + // hacky, but compatible. + if ( c ) + colData[box->col].empty = FALSE; + if ( r ) + rowData[box->row].empty = FALSE; + } +} + +static void distributeMultiBox( TQMemArray<TQLayoutStruct> &chain, int spacing, + int start, int end, + int minSize, int sizeHint, + TQMemArray<int> &stretchArray, int stretch ) +{ + int i; + int w = 0; + int wh = 0; + int max = 0; + for ( i = start; i <= end; i++ ) { + w += chain[i].minimumSize; + wh += chain[i].sizeHint; + max += chain[i].maximumSize; + chain[i].empty = FALSE; + if ( stretchArray[i] == 0 ) + chain[i].stretch = TQMAX(chain[i].stretch,stretch); + } + w += spacing * ( end - start ); + wh += spacing * ( end - start ); + max += spacing * ( end - start ); + + if ( max < minSize ) { // implies w < minSize + /* + We must increase the maximum size of at least one of the + items. qGeomCalc() will put the extra space in between the + items. We must recover that extra space and put it + somewhere. It does not really matter where, since the user + can always specify stretch factors and avoid this code. + */ + qGeomCalc( chain, start, end - start + 1, 0, minSize, spacing ); + int pos = 0; + for ( i = start; i <= end; i++ ) { + int nextPos = ( i == end ) ? minSize - 1 : chain[i + 1].pos; + int realSize = nextPos - pos; + if ( i != end ) + realSize -= spacing; + if ( chain[i].minimumSize < realSize ) + chain[i].minimumSize = realSize; + if ( chain[i].maximumSize < chain[i].minimumSize ) + chain[i].maximumSize = chain[i].minimumSize; + pos = nextPos; + } + } else if ( w < minSize ) { + qGeomCalc( chain, start, end - start + 1, 0, minSize, spacing ); + for ( i = start; i <= end; i++ ) { + if ( chain[i].minimumSize < chain[i].size ) + chain[i].minimumSize = chain[i].size; + } + } + + if ( wh < sizeHint ) { + qGeomCalc( chain, start, end - start + 1, 0, sizeHint, spacing ); + for ( i = start; i <= end; i++ ) { + if ( chain[i].sizeHint < chain[i].size ) + chain[i].sizeHint = chain[i].size; + } + } +} + +//#define QT_LAYOUT_DISABLE_CACHING + +void TQGridLayoutData::setupLayoutData( int spacing ) +{ +#ifndef QT_LAYOUT_DISABLE_CACHING + if ( !needRecalc ) + return; +#endif + has_hfw = FALSE; + int i; + + for ( i = 0; i < rr; i++ ) + rowData[i].init( rStretch[i], rSpacing[i] ); + for ( i = 0; i < cc; i++ ) + colData[i].init( cStretch[i], cSpacing[i] ); + + TQPtrListIterator<TQGridBox> it( things ); + TQGridBox * box; + while ( (box = it.current()) != 0 ) { + ++it; + addData( box ); + has_hfw = has_hfw || box->item()->hasHeightForWidth(); + } + + if ( multi ) { + TQPtrListIterator<TQGridMultiBox> it( *multi ); + TQGridMultiBox * mbox; + while ( (mbox = it.current()) != 0 ) { + ++it; + TQGridBox *box = mbox->box(); + int r1 = box->row; + int c1 = box->col; + int r2 = mbox->torow; + int c2 = mbox->tocol; + if ( r2 < 0 ) + r2 = rr - 1; + if ( c2 < 0 ) + c2 = cc - 1; + + TQSize hint = box->sizeHint(); + TQSize min = box->minimumSize(); + if ( box->hasHeightForWidth() ) + has_hfw = TRUE; + + if ( r1 == r2 ) { + addData( box, TRUE, FALSE ); + } else { + distributeMultiBox( rowData, spacing, r1, r2, + min.height(), hint.height(), + rStretch, box->vStretch() ); + } + if ( c1 == c2 ) { + addData( box, FALSE, TRUE ); + } else { + distributeMultiBox( colData, spacing, c1, c2, + min.width(), hint.width(), + cStretch, box->hStretch() ); + } + } + } + for ( i = 0; i < rr; i++ ) + rowData[i].expansive = rowData[i].expansive || rowData[i].stretch > 0; + for ( i = 0; i < cc; i++ ) + colData[i].expansive = colData[i].expansive || colData[i].stretch > 0; + + needRecalc = FALSE; +} + +void TQGridLayoutData::addHfwData( TQGridBox *box, int width ) +{ + TQMemArray<TQLayoutStruct> &rData = *hfwData; + if ( box->hasHeightForWidth() ) { + int hint = box->heightForWidth( width ); + rData[box->row].sizeHint = TQMAX( hint, rData[box->row].sizeHint ); + rData[box->row].minimumSize = TQMAX( hint, rData[box->row].minimumSize ); + } else { + TQSize hint = box->sizeHint(); + TQSize minS = box->minimumSize(); + rData[box->row].sizeHint = TQMAX( hint.height(), + rData[box->row].sizeHint ); + rData[box->row].minimumSize = TQMAX( minS.height(), + rData[box->row].minimumSize ); + } +} + +/* + Similar to setupLayoutData(), but uses heightForWidth(colData) + instead of sizeHint(). Assumes that setupLayoutData() and + qGeomCalc(colData) has been called. +*/ +void TQGridLayoutData::setupHfwLayoutData( int spacing ) +{ + TQMemArray<TQLayoutStruct> &rData = *hfwData; + int i; + for ( i = 0; i < rr; i++ ) { + rData[i] = rowData[i]; + rData[i].minimumSize = rData[i].sizeHint = 0; + } + TQPtrListIterator<TQGridBox> it( things ); + TQGridBox * box; + while ( (box=it.current()) != 0 ) { + ++it; + addHfwData( box, colData[box->col].size ); + } + if ( multi ) { + TQPtrListIterator<TQGridMultiBox> it( *multi ); + TQGridMultiBox * mbox; + while ( (mbox=it.current()) != 0 ) { + ++it; + TQGridBox *box = mbox->box(); + int r1 = box->row; + int c1 = box->col; + int r2 = mbox->torow; + int c2 = mbox->tocol; + if ( r2 < 0 ) + r2 = rr-1; + if ( c2 < 0 ) + c2 = cc-1; + int w = colData[c2].pos + colData[c2].size - colData[c1].pos; + if ( r1 == r2 ) { + addHfwData( box, w ); + } else { + TQSize hint = box->sizeHint(); + TQSize min = box->minimumSize(); + if ( box->hasHeightForWidth() ) { + int hfwh = box->heightForWidth( w ); + if ( hfwh > hint.height() ) + hint.setHeight( hfwh ); + if ( hfwh > min.height() ) + min.setHeight( hfwh ); + } + distributeMultiBox( rData, spacing, r1, r2, + min.height(), hint.height(), + rStretch, box->vStretch() ); + } + } + } + for ( i = 0; i < rr; i++ ) + rData[i].expansive = rData[i].expansive || rData[i].stretch > 0; +} + +void TQGridLayoutData::distribute( TQRect r, int spacing ) +{ + bool visualHReversed = hReversed; + if ( TQApplication::reverseLayout() ) + visualHReversed = !visualHReversed; + + setupLayoutData( spacing ); + + qGeomCalc( colData, 0, cc, r.x(), r.width(), spacing ); + TQMemArray<TQLayoutStruct> *rDataPtr; + if ( has_hfw ) { + recalcHFW( r.width(), spacing ); + qGeomCalc( *hfwData, 0, rr, r.y(), r.height(), spacing ); + rDataPtr = hfwData; + } else { + qGeomCalc( rowData, 0, rr, r.y(), r.height(), spacing ); + rDataPtr = &rowData; + } + TQMemArray<TQLayoutStruct> &rData = *rDataPtr; + + TQPtrListIterator<TQGridBox> it( things ); + TQGridBox * box; + while ( (box=it.current()) != 0 ) { + ++it; + int x = colData[box->col].pos; + int y = rData[box->row].pos; + int w = colData[box->col].size; + int h = rData[box->row].size; + if ( visualHReversed ) + x = r.left() + r.right() - x - w + 1; + if ( vReversed ) + y = r.top() + r.bottom() - y - h + 1; + box->setGeometry( TQRect( x, y, w, h ) ); + } + if ( multi ) { + TQPtrListIterator<TQGridMultiBox> it( *multi ); + TQGridMultiBox * mbox; + while ( (mbox=it.current()) != 0 ) { + ++it; + TQGridBox *box = mbox->box(); + int r2 = mbox->torow; + int c2 = mbox->tocol; + if ( r2 < 0 ) + r2 = rr-1; + if ( c2 < 0 ) + c2 = cc-1; + + int x = colData[box->col].pos; + int y = rData[box->row].pos; + int x2p = colData[c2].pos + colData[c2].size; // x2+1 + int y2p = rData[r2].pos + rData[r2].size; // y2+1 + int w = x2p - x; + int h = y2p - y; + // this code is copied from above: + if ( visualHReversed ) + x = r.left() + r.right() - x - w + 1; + if ( vReversed ) + y = r.top() + r.bottom() - y - h + 1; + box->setGeometry( TQRect( x, y, w, h ) ); + } + } +} + +TQRect TQGridLayoutData::cellGeometry( int row, int col ) const +{ + if ( row < 0 || row >= rr || col < 0 || col >= cc ) + return TQRect(); + + const TQMemArray<TQLayoutStruct> *rDataPtr; + if ( has_hfw ) + rDataPtr = hfwData; + else + rDataPtr = &rowData; + return TQRect( colData[col].pos, (*rDataPtr)[row].pos, + colData[col].size, (*rDataPtr)[row].size ); +} + +class TQGridLayoutDataIterator : public TQGLayoutIterator +{ +public: + TQGridLayoutDataIterator( TQGridLayoutData *d ); + uint count() const { return data->count(); } + TQLayoutItem *current() { + if ( multi ) { + if ( !data->multi || idx >= (int)data->multi->count() ) + return 0; + return data->multi->at( idx )->box()->item(); + } else { + if ( idx >= (int)data->things.count() ) + return 0; + return data->things.at( idx )->item(); + } + } + void toFirst() { + multi = data->things.isEmpty(); + idx = 0; + } + TQLayoutItem *next() { + idx++; + if ( !multi && idx >= (int)data->things.count() ) { + multi = TRUE; + idx = 0; + } + return current(); + } + TQLayoutItem *takeCurrent() { + TQLayoutItem *item = 0; + if ( multi ) { + if ( !data->multi || idx >= (int)data->multi->count() ) + return 0; + TQGridMultiBox *b = data->multi->take( idx ); + item = b->takeItem(); + delete b; + } else { + if ( idx >= (int)data->things.count() ) + return 0; + TQGridBox *b = data->things.take( idx ); + item = b->takeItem(); + delete b; + } + return item; + } + +private: + TQGridLayoutData *data; + bool multi; + int idx; +}; + +inline TQGridLayoutDataIterator::TQGridLayoutDataIterator( TQGridLayoutData *d ) + : data( d ) +{ + toFirst(); +} + +/*! + \class TQGridLayout + + \brief The TQGridLayout class lays out widgets in a grid. + + \ingroup geomanagement + \ingroup appearance + \mainclass + + TQGridLayout takes the space made available to it (by its parent + layout or by the mainWidget()), divides it up into rows and + columns, and puts each widget it manages into the correct cell. + + Columns and rows behave identically; we will discuss columns, but + there are equivalent functions for rows. + + Each column has a minimum width and a stretch factor. The minimum + width is the greatest of that set using addColSpacing() and the + minimum width of each widget in that column. The stretch factor is + set using setColStretch() and determines how much of the available + space the column will get over and above its necessary minimum. + + Normally, each managed widget or layout is put into a cell of its + own using addWidget(), addLayout() or by the \link + TQLayout::setAutoAdd() auto-add facility\endlink. It is also + possible for a widget to occupy multiple cells using + addMultiCellWidget(). If you do this, TQGridLayout will guess how + to distribute the size over the columns/rows (based on the stretch + factors). + + To remove a widget from a layout, call remove(). Calling + TQWidget::hide() on a widget also effectively removes the widget + from the layout until TQWidget::show() is called. + + This illustration shows a fragment of a dialog with a five-column, + three-row grid (the grid is shown overlaid in magenta): + + \img gridlayout.png + + Columns 0, 2 and 4 in this dialog fragment are made up of a + TQLabel, a TQLineEdit, and a TQListBox. Columns 1 and 3 are + placeholders made with addColSpacing(). Row 0 consists of three + TQLabel objects, row 1 of three TQLineEdit objects and row 2 of + three TQListBox objects. We used placeholder columns (1 and 3) to + get the right amount of space between the columns. + + Note that the columns and rows are not equally wide or tall. If + you want two columns to have the same width, you must set their + minimum widths and stretch factors to be the same yourself. You do + this using addColSpacing() and setColStretch(). + + If the TQGridLayout is not the top-level layout (i.e. does not + manage all of the widget's area and children), you must add it to + its parent layout when you create it, but before you do anything + with it. The normal way to add a layout is by calling + parentLayout-\>addLayout(). + + Once you have added your layout you can start putting widgets and + other layouts into the cells of your grid layout using + addWidget(), addLayout() and addMultiCellWidget(). + + TQGridLayout also includes two margin widths: the border and the + spacing. The border is the width of the reserved space along each + of the TQGridLayout's four sides. The spacing is the width of the + automatically allocated spacing between neighboring boxes. + + Both the border and the spacing are parameters of the constructor + and default to 0. + + \sa TQGrid, \link layout.html Layout Overview \endlink +*/ + +/*! + \enum TQGridLayout::Corner + + This enum identifies which corner is the origin (0, 0) of the + layout. + + \value TopLeft the top-left corner + \value TopRight the top-right corner + \value BottomLeft the bottom-left corner + \value BottomRight the bottom-right corner +*/ + +/*! + Constructs a new TQGridLayout with \a nRows rows, \a nCols columns + and parent widget, \a parent. \a parent may not be 0. The grid + layout is called \a name. + + \a margin is the number of pixels between the edge of the widget + and its managed children. \a space is the default number of pixels + between cells. If \a space is -1, the value of \a margin is used. +*/ +TQGridLayout::TQGridLayout( TQWidget *parent, int nRows, int nCols, int margin, + int space, const char *name ) + : TQLayout( parent, margin, space, name ) +{ + init( nRows, nCols ); +} + +/*! + Constructs a new grid that is placed inside \a parentLayout with + \a nRows rows and \a nCols columns. If \a spacing is -1, this + TQGridLayout inherits its parent's spacing(); otherwise \a spacing + is used. The grid layout is called \a name. + + This grid is placed according to \a parentLayout's default + placement rules. +*/ +TQGridLayout::TQGridLayout( TQLayout *parentLayout, int nRows, int nCols, + int spacing, const char *name ) + : TQLayout( parentLayout, spacing, name ) +{ + init( nRows, nCols ); +} + +/*! + Constructs a new grid with \a nRows rows and \a nCols columns. If + \a spacing is -1, this TQGridLayout inherits its parent's + spacing(); otherwise \a spacing is used. The grid layout is called + \a name. + + You must insert this grid into another layout. You can insert + widgets and layouts into this layout at any time, but laying out + will not be performed before this is inserted into another layout. +*/ +TQGridLayout::TQGridLayout( int nRows, int nCols, + int spacing, const char *name ) + : TQLayout( spacing, name ) +{ + init( nRows, nCols ); +} + +/*! + Destroys the grid layout. Geometry management is terminated if + this is a top-level grid. + + The layout's widgets aren't destroyed. +*/ +TQGridLayout::~TQGridLayout() +{ + delete data; +} + +/*! + Returns the number of rows in this grid. +*/ +int TQGridLayout::numRows() const +{ + return data->numRows(); +} + +/*! + Returns the number of columns in this grid. +*/ +int TQGridLayout::numCols() const +{ + return data->numCols(); +} + +/*! + Returns the preferred size of this grid. +*/ +TQSize TQGridLayout::sizeHint() const +{ + return data->sizeHint( spacing() ) + TQSize( 2 * margin(), 2 * margin() ); +} + +/*! + Returns the minimum size needed by this grid. +*/ +TQSize TQGridLayout::minimumSize() const +{ + return data->minimumSize( spacing() ) + TQSize( 2 * margin(), 2 * margin() ); +} + +/*! + Returns the maximum size needed by this grid. +*/ +TQSize TQGridLayout::maximumSize() const +{ + TQSize s = data->maximumSize( spacing() ) + + TQSize( 2 * margin(), 2 * margin() ); + s = s.boundedTo( TQSize(TQLAYOUTSIZE_MAX, TQLAYOUTSIZE_MAX) ); + if ( alignment() & TQt::AlignHorizontal_Mask ) + s.setWidth( TQLAYOUTSIZE_MAX ); + if ( alignment() & TQt::AlignVertical_Mask ) + s.setHeight( TQLAYOUTSIZE_MAX ); + return s; +} + +/*! + Returns TRUE if this layout's preferred height depends on its + width; otherwise returns FALSE. +*/ +bool TQGridLayout::hasHeightForWidth() const +{ + return ((TQGridLayout*)this)->data->hasHeightForWidth( spacing() ); +} + +/*! + Returns the layout's preferred height when it is \a w pixels wide. +*/ +int TQGridLayout::heightForWidth( int w ) const +{ + TQGridLayout *that = (TQGridLayout*)this; + return that->data->heightForWidth( w, margin(), spacing() ); +} + +/*! \internal */ +int TQGridLayout::minimumHeightForWidth( int w ) const +{ + TQGridLayout *that = (TQGridLayout*)this; + return that->data->minimumHeightForWidth( w, margin(), spacing() ); +} + +/*! + Searches for widget \a w in this layout (not including child + layouts). If \a w is found, it sets \c \a row and \c \a col to + the row and column and returns TRUE; otherwise returns FALSE. + + Note: if a widget spans multiple rows/columns, the top-left cell + is returned. +*/ +bool TQGridLayout::findWidget( TQWidget* w, int *row, int *col ) +{ + return data->findWidget( w, row, col ); +} + +/*! + Resizes managed widgets within the rectangle \a r. +*/ +void TQGridLayout::setGeometry( const TQRect &r ) +{ + if ( data->isDirty() || r != geometry() ) { + TQLayout::setGeometry( r ); + TQRect cr = alignment() ? alignmentRect( r ) : r; + TQRect s( cr.x() + margin(), cr.y() + margin(), + cr.width() - 2 * margin(), cr.height() - 2 * margin() ); + data->distribute( s, spacing() ); + } +} + +/*! + Returns the geometry of the cell with row \a row and column \a col + in the grid. Returns an invalid rectangle if \a row or \a col is + outside the grid. + + \warning in the current version of TQt this function does not + return valid results until setGeometry() has been called, i.e. + after the mainWidget() is visible. +*/ +TQRect TQGridLayout::cellGeometry( int row, int col ) const +{ + return data->cellGeometry( row, col ); +} + +/*! + Expands this grid so that it will have \a nRows rows and \a nCols + columns. Will not shrink the grid. You should not need to call + this function because TQGridLayout expands automatically as new + items are inserted. +*/ +void TQGridLayout::expand( int nRows, int nCols ) +{ + data->expand( nRows, nCols ); +} + +/*! + Sets up the grid. +*/ +void TQGridLayout::init( int nRows, int nCols ) +{ + setSupportsMargin( TRUE ); + data = new TQGridLayoutData( nRows, nCols ); +} + +/*! + \overload + + Adds \a item to the next free position of this layout. +*/ +void TQGridLayout::addItem( TQLayoutItem *item ) +{ + int r, c; + data->getNextPos( r, c ); + add( item, r, c ); +} + +/*! + Adds \a item at position \a row, \a col. The layout takes + ownership of the \a item. +*/ +void TQGridLayout::addItem( TQLayoutItem *item, int row, int col ) +{ + add( item, row, col ); +} + +/*! + Adds \a item at position \a row, \a col. The layout takes + ownership of the \a item. +*/ +void TQGridLayout::add( TQLayoutItem *item, int row, int col ) +{ + TQGridBox *box = new TQGridBox( item ); + data->add( box, row, col ); +} + +/*! + Adds the \a item to the cell grid, spanning multiple rows/columns. + + The cell will span from \a fromRow, \a fromCol to \a toRow, \a + toCol. Alignment is specified by \a alignment, which is a bitwise + OR of \l TQt::AlignmentFlags values. The default alignment is 0, + which means that the widget fills the entire cell. +*/ +void TQGridLayout::addMultiCell( TQLayoutItem *item, int fromRow, int toRow, + int fromCol, int toCol, int alignment ) +{ + TQGridBox *b = new TQGridBox( item ); + b->setAlignment( alignment ); + data->add( b, fromRow, toRow, fromCol, toCol ); +} + +/* + Returns TRUE if the widget \a w can be added to the layout \a l; + otherwise returns FALSE. +*/ +static bool checkWidget( TQLayout *l, TQWidget *w ) +{ + if ( !w ) { +#if defined(QT_CHECK_STATE) + tqWarning( "TQLayout: Cannot add null widget to %s/%s", l->className(), + l->name() ); +#endif + return FALSE; + } + if ( w->parentWidget() != l->mainWidget() && l->mainWidget() ) { +#if defined(QT_CHECK_STATE) + if ( w->parentWidget() ) + tqWarning( "TQLayout: Adding %s/%s (child of %s/%s) to layout for " + "%s/%s", w->className(), w->name(), + w->parentWidget()->className(), w->parentWidget()->name(), + l->mainWidget()->className(), l->mainWidget()->name() ); + else + tqWarning( "TQLayout: Adding %s/%s (top-level widget) to layout for" + " %s/%s", w->className(), w->name(), + l->mainWidget()->className(), l->mainWidget()->name() ); +#endif + return FALSE; + } + return TRUE; +} + +/*! + Adds the widget \a w to the cell grid at \a row, \a col. The + top-left position is (0, 0) by default. + + Alignment is specified by \a alignment, which is a bitwise OR of + \l TQt::AlignmentFlags values. The default alignment is 0, which + means that the widget fills the entire cell. + + \list + \i You should not call this if you have enabled the + \link TQLayout::setAutoAdd() auto-add facility of the layout\endlink. + + \i From TQt 3.0, the \a alignment parameter is interpreted more + aggressively than in previous versions of TQt. A non-default + alignment now indicates that the widget should not grow to fill + the available space, but should be sized according to sizeHint(). + \endlist + + \sa addMultiCellWidget() +*/ +void TQGridLayout::addWidget( TQWidget *w, int row, int col, int alignment ) +{ + if ( !checkWidget( this, w ) ) + return; + if ( row < 0 || col < 0 ) { +#if defined(QT_CHECK_STATE) + tqWarning( "TQGridLayout: Cannot add %s/%s to %s/%s at row %d col %d", + w->className(), w->name(), className(), name(), row, col ); +#endif + return; + } + TQWidgetItem *b = new TQWidgetItem( w ); + b->setAlignment( alignment ); + add( b, row, col ); +} + +/*! + Adds the widget \a w to the cell grid, spanning multiple + rows/columns. The cell will span from \a fromRow, \a fromCol to \a + toRow, \a toCol. + + Alignment is specified by \a alignment, which is a bitwise OR of + \l TQt::AlignmentFlags values. The default alignment is 0, which + means that the widget fills the entire cell. + + A non-zero alignment indicates that the widget should not grow to + fill the available space but should be sized according to + sizeHint(). + + \sa addWidget() +*/ +void TQGridLayout::addMultiCellWidget( TQWidget *w, int fromRow, int toRow, + int fromCol, int toCol, int alignment ) +{ + TQGridBox *b = new TQGridBox( w ); + b->setAlignment( alignment ); + data->add( b, fromRow, toRow, fromCol, toCol ); +} + +/*! + Places the \a layout at position (\a row, \a col) in the grid. The + top-left position is (0, 0). + + \a layout becomes a child of the grid layout. + + When a layout is constructed with another layout as its parent, + you don't need to call addLayout(); the child layout is + automatically added to the parent layout as it is constructed. + + \sa addMultiCellLayout() +*/ +void TQGridLayout::addLayout( TQLayout *layout, int row, int col ) +{ + addChildLayout( layout ); + add( layout, row, col ); +} + +/*! + Adds the layout \a layout to the cell grid, spanning multiple + rows/columns. The cell will span from \a fromRow, \a fromCol to \a + toRow, \a toCol. + + Alignment is specified by \a alignment, which is a bitwise OR of + \l TQt::AlignmentFlags values. The default alignment is 0, which + means that the widget fills the entire cell. + + A non-zero alignment indicates that the layout should not grow to + fill the available space but should be sized according to + sizeHint(). + + \a layout becomes a child of the grid layout. + + \sa addLayout() +*/ +void TQGridLayout::addMultiCellLayout( TQLayout *layout, int fromRow, int toRow, + int fromCol, int toCol, int alignment ) +{ + addChildLayout( layout ); + TQGridBox *b = new TQGridBox( layout ); + b->setAlignment( alignment ); + data->add( b, fromRow, toRow, fromCol, toCol ); +} + +/*! + Sets the stretch factor of row \a row to \a stretch. The first row + is number 0. + + The stretch factor is relative to the other rows in this grid. + Rows with a higher stretch factor take more of the available + space. + + The default stretch factor is 0. If the stretch factor is 0 and no + other row in this table can grow at all, the row may still grow. + + \sa rowStretch(), setRowSpacing(), setColStretch() +*/ +void TQGridLayout::setRowStretch( int row, int stretch ) +{ + data->setRowStretch( row, stretch ); +} + +/*! + Returns the stretch factor for row \a row. + + \sa setRowStretch() +*/ +int TQGridLayout::rowStretch( int row ) const +{ + return data->rowStretch( row ); +} + +/*! + Returns the stretch factor for column \a col. + + \sa setColStretch() +*/ +int TQGridLayout::colStretch( int col ) const +{ + return data->colStretch( col ); +} + +/*! + Sets the stretch factor of column \a col to \a stretch. The first + column is number 0. + + The stretch factor is relative to the other columns in this grid. + Columns with a higher stretch factor take more of the available + space. + + The default stretch factor is 0. If the stretch factor is 0 and no + other column in this table can grow at all, the column may still + grow. + + \sa colStretch(), addColSpacing(), setRowStretch() +*/ +void TQGridLayout::setColStretch( int col, int stretch ) +{ + data->setColStretch( col, stretch ); +} + +/*! + \obsolete + + Sets the minimum height of row \a row to \a minsize pixels. + + Use setRowSpacing() instead. +*/ +void TQGridLayout::addRowSpacing( int row, int minsize ) +{ + TQLayoutItem *b = new TQSpacerItem( 0, minsize ); + add( b, row, 0 ); +} + +/*! + \obsolete + + Sets the minimum width of column \a col to \a minsize pixels. + + Use setColSpacing() instead. +*/ +void TQGridLayout::addColSpacing( int col, int minsize ) +{ + TQLayoutItem *b = new TQSpacerItem( minsize, 0 ); + add( b, 0, col ); +} + +/*! + Sets the minimum height of row \a row to \a minSize pixels. + + \sa rowSpacing(), setColSpacing() +*/ +void TQGridLayout::setRowSpacing( int row, int minSize ) +{ + data->setRowSpacing( row, minSize ); +} + +/*! + Returns the row spacing for row \a row. + + \sa setRowSpacing() +*/ +int TQGridLayout::rowSpacing( int row ) const +{ + return data->rowSpacing( row ); +} + +/*! + Sets the minimum width of column \a col to \a minSize pixels. + + \sa colSpacing(), setRowSpacing() +*/ +void TQGridLayout::setColSpacing( int col, int minSize ) +{ + data->setColSpacing( col, minSize ); +} + +/*! + Returns the column spacing for column \a col. + + \sa setColSpacing() +*/ +int TQGridLayout::colSpacing( int col ) const +{ + return data->colSpacing( col ); +} + +/*! + Returns whether this layout can make use of more space than + sizeHint(). A value of \c Vertical or \c Horizontal means that it wants + to grow in only one dimension, whereas \c BothDirections means that + it wants to grow in both dimensions. +*/ +TQSizePolicy::ExpandData TQGridLayout::expanding() const +{ + return data->expanding( spacing() ); +} + +/*! + Sets the grid's origin corner, i.e. position (0, 0), to \a c. +*/ +void TQGridLayout::setOrigin( Corner c ) +{ + data->setReversed( c == BottomLeft || c == BottomRight, + c == TopRight || c == BottomRight ); +} + +/*! + Returns the corner that's used for the grid's origin, i.e. for + position (0, 0). +*/ +TQGridLayout::Corner TQGridLayout::origin() const +{ + if ( data->horReversed() ) { + return data->verReversed() ? BottomRight : TopRight; + } else { + return data->verReversed() ? BottomLeft : TopLeft; + } +} + +/*! + Resets cached information. +*/ +void TQGridLayout::invalidate() +{ + TQLayout::invalidate(); + TQLayout::setGeometry( TQRect() ); // for binary compatibility (?) + data->setDirty(); +} + +/*! \reimp */ +TQLayoutIterator TQGridLayout::iterator() +{ + return TQLayoutIterator( new TQGridLayoutDataIterator(data) ); +} + +struct TQBoxLayoutItem +{ + TQBoxLayoutItem( TQLayoutItem *it, int stretch_ = 0 ) + : item( it ), stretch( stretch_ ), magic( FALSE ) { } + ~TQBoxLayoutItem() { delete item; } + + int hfw( int w ) { + if ( item->hasHeightForWidth() ) { + return item->heightForWidth( w ); + } else { + return item->sizeHint().height(); + } + } + int mhfw( int w ) { + if ( item->hasHeightForWidth() ) { + return item->heightForWidth( w ); + } else { + return item->minimumSize().height(); + } + } + int hStretch() { + if ( stretch == 0 && item->widget() ) { + return item->widget()->sizePolicy().horStretch(); + } else { + return stretch; + } + } + int vStretch() { + if ( stretch == 0 && item->widget() ) { + return item->widget()->sizePolicy().verStretch(); + } else { + return stretch; + } + } + + TQLayoutItem *item; + int stretch; + bool magic; +}; + +class TQBoxLayoutData +{ +public: + TQBoxLayoutData() : geomArray( 0 ), hfwWidth( -1 ), dirty( TRUE ) + { list.setAutoDelete( TRUE ); } + + ~TQBoxLayoutData() { delete geomArray; } + void setDirty() { + delete geomArray; + geomArray = 0; + hfwWidth = -1; + hfwHeight = -1; + dirty = TRUE; + } + + TQPtrList<TQBoxLayoutItem> list; + TQMemArray<TQLayoutStruct> *geomArray; + int hfwWidth; + int hfwHeight; + int hfwMinHeight; + TQSize sizeHint; + TQSize minSize; + TQSize maxSize; + TQSizePolicy::ExpandData expanding; + uint hasHfw : 1; + uint dirty : 1; +}; + +class TQBoxLayoutIterator : public TQGLayoutIterator +{ +public: + TQBoxLayoutIterator( TQBoxLayoutData *d ) : data( d ), idx( 0 ) {} + TQLayoutItem *current() { + if ( idx >= int(data->list.count()) ) + return 0; + return data->list.at(idx)->item; + } + TQLayoutItem *next() { + idx++; + return current(); + } + TQLayoutItem *takeCurrent() { + TQLayoutItem *item = 0; + + TQBoxLayoutItem *b = data->list.take( idx ); + if ( b ) { + item = b->item; + b->item = 0; + delete b; + } + data->setDirty(); + return item; + } + +private: + TQBoxLayoutData *data; + int idx; +}; + +/*! + \class TQBoxLayout + + \brief The TQBoxLayout class lines up child widgets horizontally or + vertically. + + \ingroup geomanagement + \ingroup appearance + + TQBoxLayout takes the space it gets (from its parent layout or from + the mainWidget()), divides it up into a row of boxes, and makes + each managed widget fill one box. + + \img tqhbox-m.png Horizontal box with five child widgets + + If the TQBoxLayout's orientation is \c Horizontal the boxes are + placed in a row, with suitable sizes. Each widget (or other box) + will get at least its minimum size and at most its maximum size. + Any excess space is shared according to the stretch factors (more + about that below). + + \img tqvbox-m.png Vertical box with five child widgets + + If the TQBoxLayout's orientation is \c Vertical, the boxes are + placed in a column, again with suitable sizes. + + The easiest way to create a TQBoxLayout is to use one of the + convenience classes, e.g. TQHBoxLayout (for \c Horizontal boxes) or + TQVBoxLayout (for \c Vertical boxes). You can also use the + TQBoxLayout constructor directly, specifying its direction as \c + LeftToRight, \c Down, \c RightToLeft or \c Up. + + If the TQBoxLayout is not the top-level layout (i.e. it is not + managing all of the widget's area and children), you must add it + to its parent layout before you can do anything with it. The + normal way to add a layout is by calling + parentLayout-\>addLayout(). + + Once you have done this, you can add boxes to the TQBoxLayout using + one of four functions: + + \list + \i addWidget() to add a widget to the TQBoxLayout and set the + widget's stretch factor. (The stretch factor is along the row of + boxes.) + + \i addSpacing() to create an empty box; this is one of the + functions you use to create nice and spacious dialogs. See below + for ways to set margins. + + \i addStretch() to create an empty, stretchable box. + + \i addLayout() to add a box containing another TQLayout to the row + and set that layout's stretch factor. + \endlist + + Use insertWidget(), insertSpacing(), insertStretch() or + insertLayout() to insert a box at a specified position in the + layout. + + TQBoxLayout also includes two margin widths: + + \list + \i setMargin() sets the width of the outer border. This is the width + of the reserved space along each of the TQBoxLayout's four sides. + \i setSpacing() sets the width between neighboring boxes. (You + can use addSpacing() to get more space at a particular spot.) + \endlist + + The margin defaults to 0. The spacing defaults to the same as the + margin width for a top-level layout, or to the same as the parent + layout. Both are parameters to the constructor. + + To remove a widget from a layout, call remove(). Calling + TQWidget::hide() on a widget also effectively removes the widget + from the layout until TQWidget::show() is called. + + You will almost always want to use TQVBoxLayout and TQHBoxLayout + rather than TQBoxLayout because of their convenient constructors. + + \sa TQGrid \link layout.html Layout Overview \endlink +*/ + +/*! + \enum TQBoxLayout::Direction + + This type is used to determine the direction of a box layout. + + \value LeftToRight Horizontal, from left to right + \value RightToLeft Horizontal, from right to left + \value TopToBottom Vertical, from top to bottom + \value Down The same as \c TopToBottom + \value BottomToTop Vertical, from bottom to top + \value Up The same as \c BottomToTop +*/ + +static inline bool horz( TQBoxLayout::Direction dir ) +{ + return dir == TQBoxLayout::RightToLeft || dir == TQBoxLayout::LeftToRight; +} + +/*! + Constructs a new TQBoxLayout with direction \a d and main widget \a + parent. \a parent may not be 0. + + The \a margin is the number of pixels between the edge of the + widget and its managed children. The \a spacing is the default + number of pixels between neighboring children. If \a spacing is -1 + the value of \a margin is used for \a spacing. + + \a name is the internal object name. + + \sa direction() +*/ +TQBoxLayout::TQBoxLayout( TQWidget *parent, Direction d, + int margin, int spacing, const char *name ) + : TQLayout( parent, margin, spacing, name ) +{ + data = new TQBoxLayoutData; + dir = d; + setSupportsMargin( TRUE ); +} + +/*! + Constructs a new TQBoxLayout called \a name, with direction \a d, + and inserts it into \a parentLayout. + + The \a spacing is the default number of pixels between neighboring + children. If \a spacing is -1, the layout will inherit its + parent's spacing(). +*/ +TQBoxLayout::TQBoxLayout( TQLayout *parentLayout, Direction d, int spacing, + const char *name ) + : TQLayout( parentLayout, spacing, name ) +{ + data = new TQBoxLayoutData; + dir = d; + setSupportsMargin( TRUE ); +} + +/*! + Constructs a new TQBoxLayout called \a name, with direction \a d. + + If \a spacing is -1, the layout will inherit its parent's + spacing(); otherwise \a spacing is used. + + You must insert this box into another layout. +*/ +TQBoxLayout::TQBoxLayout( Direction d, int spacing, const char *name ) + : TQLayout( spacing, name ) +{ + data = new TQBoxLayoutData; + dir = d; + setSupportsMargin( TRUE ); +} + +/*! + Destroys this box layout. + + The layout's widgets aren't destroyed. +*/ +TQBoxLayout::~TQBoxLayout() +{ + delete data; +} + +/*! + Returns the preferred size of this box layout. +*/ +TQSize TQBoxLayout::sizeHint() const +{ + if ( data->dirty ) { + TQBoxLayout *that = (TQBoxLayout*)this; + that->setupGeom(); + } + return data->sizeHint + TQSize( 2 * margin(), 2 * margin() ); +} + +/*! + Returns the minimum size needed by this box layout. +*/ +TQSize TQBoxLayout::minimumSize() const +{ + if ( data->dirty ) { + TQBoxLayout *that = (TQBoxLayout*)this; + that->setupGeom(); + } + return data->minSize + TQSize( 2 * margin(), 2 * margin() ); +} + +/*! + Returns the maximum size needed by this box layout. +*/ +TQSize TQBoxLayout::maximumSize() const +{ + if ( data->dirty ) { + TQBoxLayout *that = (TQBoxLayout*)this; + that->setupGeom(); + } + TQSize s = ( data->maxSize + TQSize(2 * margin(), 2 * margin()) ) + .boundedTo(TQSize(TQLAYOUTSIZE_MAX, TQLAYOUTSIZE_MAX)); + if ( alignment() & TQt::AlignHorizontal_Mask ) + s.setWidth( TQLAYOUTSIZE_MAX ); + if ( alignment() & TQt::AlignVertical_Mask ) + s.setHeight( TQLAYOUTSIZE_MAX ); + return s; +} + +/*! + Returns TRUE if this layout's preferred height depends on its width; + otherwise returns FALSE. +*/ +bool TQBoxLayout::hasHeightForWidth() const +{ + if ( data->dirty ) { + TQBoxLayout *that = (TQBoxLayout*)this; + that->setupGeom(); + } + return data->hasHfw; +} + +/*! + Returns the layout's preferred height when it is \a w pixels wide. +*/ +int TQBoxLayout::heightForWidth( int w ) const +{ + if ( !hasHeightForWidth() ) + return -1; + w -= 2 * margin(); + if ( w != data->hfwWidth ) { + TQBoxLayout *that = (TQBoxLayout*)this; + that->calcHfw( w ); + } + return data->hfwHeight + 2 * margin(); +} + +/*! \internal */ +int TQBoxLayout::minimumHeightForWidth( int w ) const +{ + (void) heightForWidth( w ); + return data->hasHfw ? (data->hfwMinHeight + 2 * margin() ) : -1; +} + +/*! + Resets cached information. +*/ +void TQBoxLayout::invalidate() +{ + TQLayout::invalidate(); + data->setDirty(); +} + +/*! + \reimp +*/ +TQLayoutIterator TQBoxLayout::iterator() +{ + return TQLayoutIterator( new TQBoxLayoutIterator(data) ); +} + +/*! + Returns whether this layout can make use of more space than + sizeHint(). A value of \c Vertical or \c Horizontal means that it wants + to grow in only one dimension, whereas \c BothDirections means that + it wants to grow in both dimensions. +*/ +TQSizePolicy::ExpandData TQBoxLayout::expanding() const +{ + if ( data->dirty ) { + TQBoxLayout *that = (TQBoxLayout*)this; + that->setupGeom(); + } + return data->expanding; +} + +/*! + Resizes managed widgets within the rectangle \a r. +*/ +void TQBoxLayout::setGeometry( const TQRect &r ) +{ + if ( !data->geomArray || r != geometry() ) { + TQLayout::setGeometry( r ); + if ( !data->geomArray ) + setupGeom(); + TQRect cr = alignment() ? alignmentRect( r ) : r; + TQRect s( cr.x() + margin(), cr.y() + margin(), + cr.width() - 2 * margin(), cr.height() - 2 * margin() ); + + TQMemArray<TQLayoutStruct> a = *data->geomArray; + int pos = horz( dir ) ? s.x() : s.y(); + int space = horz( dir ) ? s.width() : s.height(); + int n = a.count(); + if ( data->hasHfw && !horz(dir) ) { + for ( int i = 0; i < n; i++ ) { + TQBoxLayoutItem *box = data->list.at( i ); + if ( box->item->hasHeightForWidth() ) + a[i].sizeHint = a[i].minimumSize = + box->item->heightForWidth( s.width() ); + } + } + + Direction visualDir = dir; + if ( TQApplication::reverseLayout() ) { + if ( dir == LeftToRight ) + visualDir = RightToLeft; + else if ( dir == RightToLeft ) + visualDir = LeftToRight; + } + + qGeomCalc( a, 0, n, pos, space, spacing() ); + for ( int i = 0; i < n; i++ ) { + TQBoxLayoutItem *box = data->list.at( i ); + + switch ( visualDir ) { + case LeftToRight: + box->item->setGeometry( TQRect(a[i].pos, s.y(), + a[i].size, s.height()) ); + break; + case RightToLeft: + box->item->setGeometry( TQRect(s.left() + s.right() + - a[i].pos - a[i].size + 1, s.y(), + a[i].size, s.height()) ); + break; + case TopToBottom: + box->item->setGeometry( TQRect(s.x(), a[i].pos, + s.width(), a[i].size) ); + break; + case BottomToTop: + box->item->setGeometry( TQRect(s.x(), s.top() + s.bottom() + - a[i].pos - a[i].size + 1, + s.width(), a[i].size) ); + } + } + } +} + +/*! + Adds \a item to the end of this box layout. +*/ +void TQBoxLayout::addItem( TQLayoutItem *item ) +{ + TQBoxLayoutItem *it = new TQBoxLayoutItem( item ); + data->list.append( it ); + invalidate(); +} + +/*! + Inserts \a item into this box layout at position \a index. If \a + index is negative, the item is added at the end. + + \warning Does not call TQLayout::insertChildLayout() if \a item is + a TQLayout. + + \sa addItem(), findWidget() +*/ +void TQBoxLayout::insertItem( int index, TQLayoutItem *item ) +{ + if ( index < 0 ) // append + index = data->list.count(); + + TQBoxLayoutItem *it = new TQBoxLayoutItem( item ); + data->list.insert( index, it ); + invalidate(); +} + +/*! + Inserts a non-stretchable space at position \a index, with size \a + size. If \a index is negative the space is added at the end. + + The box layout has default margin and spacing. This function adds + additional space. + + \sa insertStretch() +*/ +void TQBoxLayout::insertSpacing( int index, int size ) +{ + if ( index < 0 ) // append + index = data->list.count(); + + // hack in TQGridLayoutData: spacers do not get insideSpacing + TQLayoutItem *b; + if ( horz( dir ) ) + b = new TQSpacerItem( size, 0, TQSizePolicy::Fixed, + TQSizePolicy::Minimum ); + else + b = new TQSpacerItem( 0, size, TQSizePolicy::Minimum, + TQSizePolicy::Fixed ); + + TQBoxLayoutItem *it = new TQBoxLayoutItem( b ); + it->magic = TRUE; + data->list.insert( index, it ); + invalidate(); +} + +/*! + Inserts a stretchable space at position \a index, with zero + minimum size and stretch factor \a stretch. If \a index is + negative the space is added at the end. + + \sa insertSpacing() +*/ +void TQBoxLayout::insertStretch( int index, int stretch ) +{ + if ( index < 0 ) // append + index = data->list.count(); + + // hack in TQGridLayoutData: spacers do not get insideSpacing + TQLayoutItem *b; + if ( horz( dir ) ) + b = new TQSpacerItem( 0, 0, TQSizePolicy::Expanding, + TQSizePolicy::Minimum ); + else + b = new TQSpacerItem( 0, 0, TQSizePolicy::Minimum, + TQSizePolicy::Expanding ); + + TQBoxLayoutItem *it = new TQBoxLayoutItem( b, stretch ); + it->magic = TRUE; + data->list.insert( index, it ); + invalidate(); +} + +/*! + Inserts \a layout at position \a index, with stretch factor \a + stretch. If \a index is negative, the layout is added at the end. + + \a layout becomes a child of the box layout. + + \sa setAutoAdd(), insertWidget(), insertSpacing() +*/ +void TQBoxLayout::insertLayout( int index, TQLayout *layout, int stretch ) +{ + if ( index < 0 ) // append + index = data->list.count(); + + addChildLayout( layout ); + TQBoxLayoutItem *it = new TQBoxLayoutItem( layout, stretch ); + data->list.insert( index, it ); + invalidate(); +} + +/*! + Inserts \a widget at position \a index, with stretch factor \a + stretch and alignment \a alignment. If \a index is negative, the + widget is added at the end. + + The stretch factor applies only in the \link direction() direction + \endlink of the TQBoxLayout, and is relative to the other boxes and + widgets in this TQBoxLayout. Widgets and boxes with higher stretch + factors grow more. + + If the stretch factor is 0 and nothing else in the TQBoxLayout has + a stretch factor greater than zero, the space is distributed + according to the TQWidget:sizePolicy() of each widget that's + involved. + + Alignment is specified by \a alignment, which is a bitwise OR of + \l TQt::AlignmentFlags values. The default alignment is 0, which + means that the widget fills the entire cell. + + From TQt 3.0, the \a alignment parameter is interpreted more + aggressively than in previous versions of TQt. A non-default + alignment now indicates that the widget should not grow to fill + the available space, but should be sized according to sizeHint(). + + \sa setAutoAdd(), insertLayout(), insertSpacing() +*/ +void TQBoxLayout::insertWidget( int index, TQWidget *widget, int stretch, + int alignment ) +{ + if ( !checkWidget(this, widget) ) + return; + + if ( index < 0 ) // append + index = data->list.count(); + + TQWidgetItem *b = new TQWidgetItem( widget ); + b->setAlignment( alignment ); + TQBoxLayoutItem *it = new TQBoxLayoutItem( b, stretch ); + data->list.insert( index, it ); + invalidate(); +} + +/*! + Adds a non-stretchable space with size \a size to the end of this + box layout. TQBoxLayout provides default margin and spacing. This + function adds additional space. + + \sa insertSpacing(), addStretch() +*/ +void TQBoxLayout::addSpacing( int size ) +{ + insertSpacing( -1, size ); +} + +/*! + Adds a stretchable space with zero minimum size and stretch factor + \a stretch to the end of this box layout. + + \sa addSpacing() +*/ +void TQBoxLayout::addStretch( int stretch ) +{ + insertStretch( -1, stretch ); +} + +/*! + Adds \a widget to the end of this box layout, with a stretch + factor of \a stretch and alignment \a alignment. + + The stretch factor applies only in the \link direction() direction + \endlink of the TQBoxLayout, and is relative to the other boxes and + widgets in this TQBoxLayout. Widgets and boxes with higher stretch + factors grow more. + + If the stretch factor is 0 and nothing else in the TQBoxLayout has + a stretch factor greater than zero, the space is distributed + according to the TQWidget:sizePolicy() of each widget that's + involved. + + Alignment is specified by \a alignment which is a bitwise OR of \l + TQt::AlignmentFlags values. The default alignment is 0, which means + that the widget fills the entire cell. + + From TQt 3.0, the \a alignment parameter is interpreted more + aggressively than in previous versions of TQt. A non-default + alignment now indicates that the widget should not grow to fill + the available space, but should be sized according to sizeHint(). + + \sa insertWidget(), setAutoAdd(), addLayout(), addSpacing() +*/ +void TQBoxLayout::addWidget( TQWidget *widget, int stretch, + int alignment ) +{ + insertWidget( -1, widget, stretch, alignment ); +} + +/*! + Adds \a layout to the end of the box, with serial stretch factor + \a stretch. + + When a layout is constructed with another layout as its parent, + you don't need to call addLayout(); the child layout is + automatically added to the parent layout as it is constructed. + + \sa insertLayout(), setAutoAdd(), addWidget(), addSpacing() +*/ +void TQBoxLayout::addLayout( TQLayout *layout, int stretch ) +{ + insertLayout( -1, layout, stretch ); +} + +/*! + Limits the perpendicular dimension of the box (e.g. height if the + box is LeftToRight) to a minimum of \a size. Other constraints may + increase the limit. +*/ +void TQBoxLayout::addStrut( int size ) +{ + TQLayoutItem *b; + if ( horz( dir ) ) + b = new TQSpacerItem( 0, size, TQSizePolicy::Fixed, + TQSizePolicy::Minimum ); + else + b = new TQSpacerItem( size, 0, TQSizePolicy::Minimum, + TQSizePolicy::Fixed ); + + TQBoxLayoutItem *it = new TQBoxLayoutItem( b ); + it->magic = TRUE; + data->list.append( it ); + invalidate(); +} + +/*! + Searches for widget \a w in this layout (not including child + layouts). + + Returns the index of \a w, or -1 if \a w is not found. +*/ +int TQBoxLayout::findWidget( TQWidget* w ) +{ + const int n = data->list.count(); + for ( int i = 0; i < n; i++ ) { + if ( data->list.at(i)->item->widget() == w ) + return i; + } + return -1; +} + +/*! + Sets the stretch factor for widget \a w to \a stretch and returns + TRUE if \a w is found in this layout (not including child + layouts); otherwise returns FALSE. +*/ +bool TQBoxLayout::setStretchFactor( TQWidget *w, int stretch ) +{ + TQPtrListIterator<TQBoxLayoutItem> it( data->list ); + TQBoxLayoutItem *box; + while ( (box=it.current()) != 0 ) { + ++it; + if ( box->item->widget() == w ) { + box->stretch = stretch; + invalidate(); + return TRUE; + } + } + return FALSE; +} + +/*! + \overload + + Sets the stretch factor for the layout \a l to \a stretch and + returns TRUE if \a l is found in this layout (not including child + layouts); otherwise returns FALSE. +*/ +bool TQBoxLayout::setStretchFactor( TQLayout *l, int stretch ) +{ + TQPtrListIterator<TQBoxLayoutItem> it( data->list ); + TQBoxLayoutItem *box; + while ( (box=it.current()) != 0 ) { + ++it; + if ( box->item->layout() == l ) { + box->stretch = stretch; + invalidate(); + return TRUE; + } + } + return FALSE; +} + +/*! + Sets the direction of this layout to \a direction. +*/ +void TQBoxLayout::setDirection( Direction direction ) +{ + if ( dir == direction ) + return; + if ( horz(dir) != horz(direction) ) { + //swap around the spacers (the "magic" bits) + //#### a bit yucky, knows too much. + //#### probably best to add access functions to spacerItem + //#### or even a TQSpacerItem::flip() + TQPtrListIterator<TQBoxLayoutItem> it( data->list ); + TQBoxLayoutItem *box; + while ( (box=it.current()) != 0 ) { + ++it; + if ( box->magic ) { + TQSpacerItem *sp = box->item->spacerItem(); + if ( sp ) { + if ( sp->expanding() == TQSizePolicy::NoDirection ) { + //spacing or strut + TQSize s = sp->sizeHint(); + sp->changeSize( s.height(), s.width(), + horz(direction) ? TQSizePolicy::Fixed:TQSizePolicy::Minimum, + horz(direction) ? TQSizePolicy::Minimum:TQSizePolicy::Fixed ); + + } else { + //stretch + if ( horz(direction) ) + sp->changeSize( 0, 0, TQSizePolicy::Expanding, + TQSizePolicy::Minimum ); + else + sp->changeSize( 0, 0, TQSizePolicy::Minimum, + TQSizePolicy::Expanding ); + } + } + } + } + } + dir = direction; + invalidate(); + if ( mainWidget() ) { + TQEvent *lh = new TQEvent( TQEvent::LayoutHint ); + TQApplication::postEvent( mainWidget(), lh ); + } + +} + +/* + Initializes the data structure needed by qGeomCalc and + recalculates max/min and size hint. +*/ +void TQBoxLayout::setupGeom() +{ + if ( !data->dirty ) + return; + + int maxw = horz( dir ) ? 0 : TQLAYOUTSIZE_MAX; + int maxh = horz( dir ) ? TQLAYOUTSIZE_MAX : 0; + int minw = 0; + int minh = 0; + int hintw = 0; + int hinth = 0; + + bool horexp = FALSE; + bool verexp = FALSE; + + data->hasHfw = FALSE; + + delete data->geomArray; + int n = data->list.count(); + data->geomArray = new TQMemArray<TQLayoutStruct>( n ); + TQMemArray<TQLayoutStruct>& a = *data->geomArray; + + bool first = TRUE; + for ( int i = 0; i < n; i++ ) { + TQBoxLayoutItem *box = data->list.at( i ); + TQSize max = box->item->maximumSize(); + TQSize min = box->item->minimumSize(); + TQSize hint = box->item->sizeHint(); + TQSizePolicy::ExpandData exp = box->item->expanding(); + bool empty = box->item->isEmpty(); + // space before non-empties, except the first: + int space = ( empty || first ) ? 0 : spacing(); + bool ignore = empty && box->item->widget(); // ignore hidden widgets + + if ( horz(dir) ) { + bool expand = exp & TQSizePolicy::Horizontally || box->stretch > 0; + horexp = horexp || expand; + maxw += max.width() + space; + minw += min.width() + space; + hintw += hint.width() + space; + if ( !ignore ) + qMaxExpCalc( maxh, verexp, + max.height(), exp & TQSizePolicy::Vertically ); + minh = TQMAX( minh, min.height() ); + hinth = TQMAX( hinth, hint.height() ); + + a[i].sizeHint = hint.width(); + a[i].maximumSize = max.width(); + a[i].minimumSize = min.width(); + a[i].expansive = expand; + a[i].stretch = box->stretch ? box->stretch : box->hStretch(); + } else { + bool expand = ( exp & TQSizePolicy::Vertically || box->stretch > 0 ); + verexp = verexp || expand; + maxh += max.height() + space; + minh += min.height() + space; + hinth += hint.height() + space; + if ( !ignore ) + qMaxExpCalc( maxw, horexp, + max.width(), exp & TQSizePolicy::Horizontally ); + minw = TQMAX( minw, min.width() ); + hintw = TQMAX( hintw, hint.width() ); + + a[i].sizeHint = hint.height(); + a[i].maximumSize = max.height(); + a[i].minimumSize = min.height(); + a[i].expansive = expand; + a[i].stretch = box->stretch ? box->stretch : box->vStretch(); + } + + a[i].empty = empty; + data->hasHfw = data->hasHfw || box->item->hasHeightForWidth(); + first = first && empty; + } + + data->minSize = TQSize( minw, minh ); + data->maxSize = TQSize( maxw, maxh ).expandedTo( data->minSize ); + + data->expanding = (TQSizePolicy::ExpandData) + ( (horexp ? TQSizePolicy::Horizontally : 0) + | (verexp ? TQSizePolicy::Vertically : 0) ); + + data->sizeHint = TQSize( hintw, hinth ) + .expandedTo( data->minSize ) + .boundedTo( data->maxSize ); + + data->dirty = FALSE; +} + +/* + Calculates and stores the preferred height given the width \a w. +*/ +void TQBoxLayout::calcHfw( int w ) +{ + int h = 0; + int mh = 0; + + if ( horz(dir) ) { + TQMemArray<TQLayoutStruct> &a = *data->geomArray; + int n = a.count(); + qGeomCalc( a, 0, n, 0, w, spacing() ); + for ( int i = 0; i < n; i++ ) { + TQBoxLayoutItem *box = data->list.at(i); + h = TQMAX( h, box->hfw(a[i].size) ); + mh = TQMAX( mh, box->mhfw(a[i].size) ); + } + } else { + TQPtrListIterator<TQBoxLayoutItem> it( data->list ); + TQBoxLayoutItem *box; + bool first = TRUE; + while ( (box = it.current()) != 0 ) { + ++it; + bool empty = box->item->isEmpty(); + h += box->hfw( w ); + mh += box->mhfw( w ); + if ( !first && !empty ) { + h += spacing(); + mh += spacing(); + } + first = first && empty; + } + } + data->hfwWidth = w; + data->hfwHeight = h; + data->hfwMinHeight = mh; +} + +/*! + \fn TQBoxLayout::Direction TQBoxLayout::direction() const + + Returns the direction of the box. addWidget() and addSpacing() + work in this direction; the stretch stretches in this direction. + + \sa TQBoxLayout::Direction addWidget() addSpacing() +*/ + +/*! + \class TQHBoxLayout + \brief The TQHBoxLayout class lines up widgets horizontally. + + \ingroup geomanagement + \ingroup appearance + \mainclass + + This class is used to construct horizontal box layout objects. See + \l TQBoxLayout for more details. + + The simplest use of the class is like this: + \code + TQBoxLayout * l = new TQHBoxLayout( widget ); + l->setAutoAdd( TRUE ); + new TQSomeWidget( widget ); + new TQSomeOtherWidget( widget ); + new TQAnotherWidget( widget ); + \endcode + + or like this: + \code + TQBoxLayout * l = new TQHBoxLayout( widget ); + l->addWidget( existingChildOfWidget ); + l->addWidget( anotherChildOfWidget ); + \endcode + + \img tqhboxlayout.png TQHBox + + \sa TQVBoxLayout TQGridLayout + \link layout.html the Layout overview \endlink +*/ + +/*! + Constructs a new top-level horizontal box called \a name, with + parent \a parent. + + The \a margin is the number of pixels between the edge of the + widget and its managed children. The \a spacing is the default + number of pixels between neighboring children. If \a spacing is -1 + the value of \a margin is used for \a spacing. +*/ +TQHBoxLayout::TQHBoxLayout( TQWidget *parent, int margin, + int spacing, const char *name ) + : TQBoxLayout( parent, LeftToRight, margin, spacing, name ) +{ +} + +/*! + Constructs a new horizontal box called name \a name and adds it to + \a parentLayout. + + The \a spacing is the default number of pixels between neighboring + children. If \a spacing is -1, this TQHBoxLayout will inherit its + parent's spacing(). +*/ +TQHBoxLayout::TQHBoxLayout( TQLayout *parentLayout, int spacing, + const char *name ) + : TQBoxLayout( parentLayout, LeftToRight, spacing, name ) +{ +} + +/*! + Constructs a new horizontal box called name \a name. You must add + it to another layout. + + The \a spacing is the default number of pixels between neighboring + children. If \a spacing is -1, this TQHBoxLayout will inherit its + parent's spacing(). +*/ +TQHBoxLayout::TQHBoxLayout( int spacing, const char *name ) + : TQBoxLayout( LeftToRight, spacing, name ) +{ +} + +/*! + Destroys this box layout. + + The layout's widgets aren't destroyed. +*/ +TQHBoxLayout::~TQHBoxLayout() +{ +} + +/*! + \class TQVBoxLayout + + \brief The TQVBoxLayout class lines up widgets vertically. + + \ingroup geomanagement + \ingroup appearance + \mainclass + + This class is used to construct vertical box layout objects. See + TQBoxLayout for more details. + + The simplest use of the class is like this: + \code + TQBoxLayout * l = new TQVBoxLayout( widget ); + l->addWidget( aWidget ); + l->addWidget( anotherWidget ); + \endcode + + \img tqvboxlayout.png TQVBox + + \sa TQHBoxLayout TQGridLayout \link layout.html the Layout overview \endlink +*/ + +/*! + Constructs a new top-level vertical box called \a name, with + parent \a parent. + + The \a margin is the number of pixels between the edge of the + widget and its managed children. The \a spacing is the default + number of pixels between neighboring children. If \a spacing is -1 + the value of \a margin is used for \a spacing. +*/ +TQVBoxLayout::TQVBoxLayout( TQWidget *parent, int margin, int spacing, + const char *name ) + : TQBoxLayout( parent, TopToBottom, margin, spacing, name ) +{ + +} + +/*! + Constructs a new vertical box called name \a name and adds it to + \a parentLayout. + + The \a spacing is the default number of pixels between neighboring + children. If \a spacing is -1, this TQVBoxLayout will inherit its + parent's spacing(). +*/ +TQVBoxLayout::TQVBoxLayout( TQLayout *parentLayout, int spacing, + const char *name ) + : TQBoxLayout( parentLayout, TopToBottom, spacing, name ) +{ +} + +/*! + Constructs a new vertical box called name \a name. You must add + it to another layout. + + The \a spacing is the default number of pixels between neighboring + children. If \a spacing is -1, this TQVBoxLayout will inherit its + parent's spacing(). +*/ +TQVBoxLayout::TQVBoxLayout( int spacing, const char *name ) + : TQBoxLayout( TopToBottom, spacing, name ) +{ +} + +/*! + Destroys this box layout. + + The layout's widgets aren't destroyed. +*/ +TQVBoxLayout::~TQVBoxLayout() +{ +} + +TQBoxLayout *TQBoxLayout::createTmpCopy() +{ + TQBoxLayout *bl = new TQBoxLayout( direction() ); + delete bl->data; + bl->data = data; + return bl; +} + +#endif // TQT_NO_LAYOUT |