From d796c9dd933ab96ec83b9a634feedd5d32e1ba3f Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Tue, 8 Nov 2011 12:31:36 -0600 Subject: Test conversion to TQt3 from Qt3 8c6fc1f8e35fd264dd01c582ca5e7549b32ab731 --- doc/threads.doc | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 371 insertions(+) create mode 100644 doc/threads.doc (limited to 'doc/threads.doc') diff --git a/doc/threads.doc b/doc/threads.doc new file mode 100644 index 000000000..d06195220 --- /dev/null +++ b/doc/threads.doc @@ -0,0 +1,371 @@ +/**************************************************************************** +** +** +** Qt thread support +** +** Copyright (C) 1992-2008 Trolltech ASA. All rights reserved. +** +** This file is part of the Qt GUI Toolkit. +** +** This file may be used under the terms of the GNU General +** Public License versions 2.0 or 3.0 as published by the Free +** Software Foundation and appearing in the files LICENSE.GPL2 +** and LICENSE.GPL3 included in the packaging of this file. +** Alternatively you may (at your option) use any later version +** of the GNU General Public License if such license has been +** publicly approved by Trolltech ASA (or its successors, if any) +** and the KDE Free Qt Foundation. +** +** Please review the following information to ensure GNU General +** Public Licensing retquirements will be met: +** http://trolltech.com/products/qt/licenses/licensing/opensource/. +** If you are unsure which license is appropriate for your use, please +** review the following information: +** http://trolltech.com/products/qt/licenses/licensing/licensingoverview +** or contact the sales department at sales@trolltech.com. +** +** This file may be used under the terms of the Q Public License as +** defined by Trolltech ASA and appearing in the file LICENSE.QPL +** included in the packaging of this file. Licensees holding valid Qt +** Commercial licenses may use this file in accordance with the Qt +** Commercial License Agreement provided with the Software. +** +** This file is provided "AS IS" with NO WARRANTY OF ANY KIND, +** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted +** herein. +** +**********************************************************************/ + +/*! \page threads.html + +\title Thread Support in Qt + +\tableofcontents + +\section1 Introduction + +Qt provides thread support in the form of basic platform-independent +threading classes, a thread-safe way of posting events, and a global +Qt library lock that allows you to call Qt methods from different +threads. + +This document is intended for an audience that has knowledge of, and +experience with, multithreaded applications. If you are new to +threading see our \link #reading Recommended Reading\endlink list. + + +\section1 Enabling Thread Support + +When Qt is installed on Windows, thread support is an option on some +compilers. + +On Mac OS X and Unix, thread support is enabled by adding the +\c{-thread} option when running the \c{configure} script. On Unix +platforms where multithreaded programs must be linked in special ways, +such as with a special libc, installation will create a separate +library, \c{libtqt-mt} and hence threaded programs must be linked +against this library (with \c{-ltqt-mt}) rather than the standard Qt +library. + +On both platforms, you should compile with the macro \c +QT_THREAD_SUPPORT defined (e.g. compile with +\c{-DQT_THREAD_SUPPORT}). On Windows, this is usually done by an +entry in \c{qconfig.h}. + +\section1 The Thread Classes + +These classes are built into the Qt library when thread support is enabled: + +\list +\i QThread - Provides the means to start a new thread, which begins +execution in your reimplementation of QThread::run(). This is similar +to the Java thread class. + +\i QThreadStorage - Provides per-thread data storage. This class can +only be used with threads started with QThread; it cannot be used with +threads started with platform-specific APIs. + +\i QMutex - Provides a mutual exclusion lock (also know as a mutex). +\i QMutexLocker - A convenience class which automatically locks and +unlocks a QMutex. QMutexLocker is useful in complicated code, or in +code which uses exceptions. See the documentation for more details. +\i QWaitCondition - Provides a way for threads to go to sleep until +woken up by another thread. +\i QSemaphore - Provides a simple integer semaphore. +\endlist + +\section1 Important Definitions + +\target reentrant +\target threadsafe + +When using Qt in a multithreaded program, it is important to +understand the definition of the terms \e reentrant and \e +thread-safe: + +\list +\i \e reentrant - Describes a function which can be called +simultaneously by multiple threads when each invocation of the +function references unique data. Calling a reentrant function +simultaneously with the same data is not safe, and such invocations +should be serialized. +\i \e thread-safe - Describes a function which can be called +simultaneously by multiple threads when each invocation references +shared data. Calling a thread-safe function simultaneously with the +same data is safe, since all access to the shared data are serialized. +\endlist + +Note that Qt provides both implictly and explicitly shared +classes. For more information, see the \link +threads.html#threads-shared Threads and Shared Data \endlink +section. + +Most C++ member functions are inherently reentrant, since they only +reference class member data. Any thread can call such a member +function on an instance, as long as no other thread is calling a +member function on the same instance. For example, given the class \c +Number below: + +\code + class Number + { + public: + inline Number( int n ) : num( n ) { } + + inline int number() const { return num; } + inline void setNumber( int n ) { num = n; } + + private: + int num; + }; +\endcode + +The methods \c Number::number() and \c Number::setNumber() are +reentrant, since they only reference unique data. Only one thread at +a time can call member functions on each instance of \c Number. +However, multiple threads can call member functions on separate +instances of \c Number. + +Thread-safe functions usually use a mutex (e.g a QMutex) to serialize +access to shared data. Because of this, thread-safe functions are +usually slower than reentrant functions, because of the extra overhead +of locking and unlocking the mutex. For example, given the class \c +Counter below: + +\code + class Counter + { + public: + inline Counter() { ++instances; } + inline ~Counter() { --instances; } + + private: + static int instances; + }; +\endcode + +Since the modifications of the static \c instances integer are not +serialized, this class is not thread-safe. So make it threadsafe, a +mutex must be used: + +\code + class Counter + { + public: + inline Counter() + { + mutex.lock(); + ++instances; + mutex.unlock(); + } + + ... + private: + static QMutex mutex; + static int instances; + }; +\endcode + +\section1 Thread-safe Event Posting + +In Qt, one thread is always the GUI or event thread. This is the +thread that creates a QApplication object and calls +QApplication::exec(). This is also the initial thread that calls +main() at program start. This thread is the only thread that is +allowed to perform GUI operations, including generating and receiving +events from the window system. Qt does not support creating +QApplication and running the event loop (with QApplication::exec()) in +a secondary thread. You must create the QApplication object and call +QApplication::exec() from the main() function in your program. + +Threads that wish to display data in a widget cannot modify the widget +directly, so they must post an event to the widget using +QApplication::postEvent(). The event will be delivered later on by +the GUI thread. + +Normally, the programmer would like to include some information in the +event sent to the widget. See the documentation for QCustomEvent for +more information on user-defined events. + +\section1 Threads and QObject subclasses + +The QObject class itself is \e reentrant. However, certain rules +apply when creating and using QObjects in a thread that is not the GUI +thread. + +\list 1 + +\i \e None of the QObject based classes included in the Qt library are +\e reentrant. This includes all widgets (e.g. QWidget and +subclasses), OS kernel classes (e.g. QProcess, QAccel, QTimer), and +all networking classes (e.g. QSocket, QDns). + +\i QObject and all of its subclasses are \e not \e thread-safe. This +includes the entire event delivery system. It is important to +remember that the GUI thread may be delivering events to your QObject +subclass while you are accessing the object from another thread. If +you are using QObject in a thread that is not the GUI thread, and you +are handling events sent to this object, you \e must protect all +access to your data with a mutex; otherwise you may experience crashes +or other undesired behavior. + +\i As a corollary to the above, deleting a QObject while pending +events are waiting to be delivered can cause a crash. You must not +delete the QObject directly from a thread that is not the GUI thread. +Use the QObject::deleteLater() method instead, which will cause the +event loop to delete the object after all pending events have been +delivered to the object. + +\endlist + +\section1 The Qt Library Mutex + +QApplication includes a mutex that is used to protect access to window +system functions. This mutex is locked while the event loop is +running (e.g. during event delivery) and unlocked when the eventloop +goes to sleep. Note: The Qt event loop is recursive, and the library +mutex is \e not unlocked when re-entering the event loop (e.g. when +executing a modal dialog with QDialog::exec()). + +If another thread locks the Qt library mutex, then the event loop will +stop processing events, and the locking thread may do simple GUI +operations. Operations such as creating a QPainter and drawing a line +are examples of simple GUI operations: + +\code + ... + qApp->lock(); + + QPainter p; + p.begin( mywidget ); + p.setPen( QColor( "red" ) ); + p.drawLine( 0,0,100,100 ); + p.end(); + + qApp->unlock(); + ... +\endcode + +Any operations that generate events must not be called by any thread +other than the GUI thread. Examples of such operations are: + +\list +\i creating a QWidget, QTimer, QSocketNotifier, QSocket or other network class. +\i moving, resizing, showing or hiding a QWidget. +\i starting or stoping a QTimer. +\i enabling or disabling a QSocketNotifier. +\i using a QSocket or other network class. +\endlist + +Events generated by these operations will be lost on some platforms. + +\section1 Threads and Signals and Slots + +The Signals and Slots mechanism can be used in separate threads, as +long as the rules for QObject based classes are followed. The Signals +and Slots mechanism is synchronous: when a signal is emitted, all +slots are called immediately. The slots are executed in the thread +context that emitted the signal. + +\warning Slots that generate window system events or use window system +functions \e must \e not be connected to a signal that is emitted from +a thread that is not the GUI thread. See the Qt Library Mutex section +above for more details. + +\target threads-shared +\section1 Threads and Shared Data + +Qt provides many implicitly shared and explicitly shared classes. In +a multithreaded program, multiple instances of a shared class can +reference shared data, which is dangerous if one or more threads +attempt to modify the data. Qt provides the QDeepCopy class, which +ensures that shared classes reference unique data. + +See the description of \link shclass.html implicit sharing\endlink for more +information. + +\target threads-sql +\section1 Threads and the SQL Module + +A connection can only be used from within the thread that created it. +Moving connections between threads or creating queries from a different +thread is not supported. + +In addition, the third party libraries used by the QSqlDrivers can impose +further restrictions on using the SQL Module in a multithreaded program. +Consult the manual of your database client for more information. + +\section1 Caveats + +Some things to watch out for when programming with threads: + + \list + +\i As mentioned above, QObject based classes are neither thread-safe +nor reentrant. This includes all widgets (e.g. QWidget and +subclasses), OS kernel classes (e.g. QProcess, QAccel), and all +networking classes (e.g. QSocket, QDns). + +\i Deleting a QObject while pending events are waiting to be delivered +will cause a crash. If you are creating QObjects in a thread that is +not the GUI thread and posting events to these objects, you should not +delete the QObject directly. Use the QObject::deleteLater() method +instead, which will cause the event loop to delete the object after +all pending events have been delivered to the object. + +\i Don't do any blocking operations while holding the Qt library +mutex. This will freeze up the event loop. + +\i Make sure you unlock a recursive QMutex as many times as you lock +it, no more and no less. + +\i Don't mix the normal Qt library and the threaded Qt library in your +application. This means that if your application uses the threaded Qt +library, you should not link with the normal Qt library, dynamically +load the normal Qt library or dynamically load another library or +plugin that depends on the normal Qt library. On some systems, doing +this can corrupt the static data used in the Qt library. + +\i Qt does not support creating QApplication and running the event +loop (with QApplication::exec()) in a secondary thread. You must +create the QApplication object and call QApplication::exec() from the +main() function in your program. + +\endlist + +\target reading +\section1 Recommended Reading + +\list +\i \link http://www.amazon.com/exec/obidos/ASIN/0134436989/trolltech/t +Threads Primer: A Guide to Multithreaded Programming\endlink +\i \link http://www.amazon.com/exec/obidos/ASIN/0131900676/trolltech/t +Thread Time: The Multithreaded Programming Guide\endlink +\i \link http://www.amazon.com/exec/obidos/ASIN/1565921151/trolltech/t +Pthreads Programming: A POSIX Standard for Better Multiprocessing (O'Reilly Nutshell)\endlink +\i \link http://www.amazon.com/exec/obidos/ASIN/1565922964/trolltech/t +Win32 Multithreaded Programming\endlink +\endlist + +*/ -- cgit v1.2.1