/****************************************************************************
**
** ...
**
** Copyright (C) 1992-2008 Trolltech ASA.  All rights reserved.
**
** This file is part of the TQt GUI Toolkit.
**
** This file may be used under the terms of the GNU General
** Public License versions 2.0 or 3.0 as published by the Free
** Software Foundation and appearing in the files LICENSE.GPL2
** and LICENSE.GPL3 included in the packaging of this file.
** Alternatively you may (at your option) use any later version
** of the GNU General Public License if such license has been
** publicly approved by Trolltech ASA (or its successors, if any)
** and the KDE Free TQt Foundation.
**
** Please review the following information to ensure GNU General
** Public Licensing requirements will be met:
** http://trolltech.com/products/qt/licenses/licensing/opensource/.
** If you are unsure which license is appropriate for your use, please
** review the following information:
** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
** or contact the sales department at sales@trolltech.com.
**
** This file may be used under the terms of the Q Public License as
** defined by Trolltech ASA and appearing in the file LICENSE.QPL
** included in the packaging of this file.  Licensees holding valid Qt
** Commercial licenses may use this file in accordance with the Qt
** Commercial License Agreement provided with the Software.
**
** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
** herein.
**
**********************************************************************/

/*!
\page plugins-howto.html

\title TQt Plugins HOWTO

Qt provides a simple plugin interface which makes it easy to create
custom database drivers, image formats, text codecs, styles and
widgets as stand-alone components.
\footnote TQt 3.0.5 introduces changes into some aspects of plugins, in
particular regarding loading, path handling and library versions. As
a result of this change, <b>\e{no}</b> plugins compiled with TQt 3.0.4 and
earlier will work with TQt 3.0.5 and later: they must be recompiled.
\endfootnote

Writing a plugin is achieved by subclassing the appropriate plugin
base clase, implementing a few functions, and adding a macro. 

There are five plugin base classes. Derived plugins are stored
by default in the standard plugin directory.

\table
\header
\i Base Class
\i Default Path
\row
\i \l TQImageFormatPlugin
\i \c{pluginsbase/imageformats} <sup>*</sup>
\row
\i \l TQSqlDriverPlugin
\i \c{pluginsbase/sqldrivers} <sup>*</sup>
\row
\i \l QStylePlugin
\i \c{pluginsbase/styles} <sup>*</sup>
\row
\i \l TQTextCodecPlugin
\i \c{pluginsbase/codecs} <sup>*</sup>
\row
\i \l TQWidgetPlugin
\i \c{pluginsbase/designer} <sup>*</sup>
\endtable

But where is the \c{pluginsbase} directory? When the application is
run, TQt will first treat the application's executable directory as the
\c{pluginsbase}. For example if the application is in \c{C:\Program
Files\MyApp} and has a style plugin, TQt will look in \c{C:\Program
Files\MyApp\styles}. (See \l{QApplication::applicationDirPath()} for
how to find out where the application's executable is.) TQt will also
look in the directory given by \c{tqInstallPathPlugins()}. If you want
Qt to look in additional places you can add as many paths as you need
with calls to \c{QApplication::addLibraryPath()}. And if you want to
set your own path or paths you can use
\c{QApplication::setLibraryPaths()}.

Suppose that you have a new style class called 'MyStyle' that you want
to make available as a plugin. The required code is straightforward:
\code
    class MyStylePlugin : public QStylePlugin
    {
    public:
	MyStylePlugin() {}
	~MyStylePlugin() {}

	TQStringList keys() const { 
	    return TQStringList() << "mystyle"; 
	}

	QStyle* create( const TQString& key ) { 
	    if ( key == "mystyle" ) 
		return new MyStyle;
	    return 0;
	}
    };

    TQ_EXPORT_PLUGIN( MyStylePlugin )
\endcode

(Note that QStyleFactory is case-insensitive, and the lower case
version of the key is used; other factories, e.g. TQWidgetFactory, are
case sensitive.)

The constructor and destructor do not need to do anything, so are left
empty. There are only two virtual functions that must be implemented.
The first is keys() which returns a string list of the classes
implemented in the plugin. (We've just implemented one class in the
example above.) The second is a function that returns an object of the
required class (or 0 if the plugin is asked to create an object of a
class that it doesn't implement). For QStylePlugin, this second
function is called create(). 

It is possible to implement any number of plugin subclasses in a
single plugin, providing they are all derived from the same base
class, e.g. QStylePlugin.

For database drivers, image formats, custom widgets and text codecs,
no explicit object creation is required. TQt will find and create them
as required. Styles are an exception, since you might want to set a
style explicitly in code. To apply a style, use code like this:
\code
    QApplication::setStyle( QStyleFactory::create( "MyStyle" ) );
\endcode

Some plugin classes require additional functions to be implemented.
See the \link designer-manual.book TQt Designer manual's\endlink,
'Creating Custom Widgets' section in the 'Creating Custom Widgets'
chapter, for a complete example of a TQWidgetPlugin, which implements
extra functions to integrate the plugin into \e{Qt Designer}. The
\l TQWidgetFactory class provides additional information on
TQWidgetPlugins.

See the class documentation for details of the virtual functions that
must be reimplemented for each type of plugin.

Qt applications automatically know which plugins are available,
because plugins are stored in the standard plugin subdirectories.
Because of this applications don't require any code to find and load
plugins, since TQt handles them automatically.

The default directory for plugins is \c{TQTDIR/plugins}<sup>*</sup>,
with each type of plugin in a subdirectory for that type, e.g. \c
styles. If you want your applications to use plugins and you don't
want to use the standard plugins path, have your installation process
determine the path you want to use for the plugins, and save the path,
e.g. using QSettings, for the application to read when it runs. The
application can then call QApplication::addLibraryPath() with this
path and your plugins will be available to the application. Note that
the final part of the path, i.e. \c styles, \c widgets, etc., cannot
be changed.

The normal way to include a plugin with an application is either to 
compile it in with the application, or to compile it into a \c DLL (or
\c so or other platform specific library type) and use it like any
other library. If you want the plugin to be loadable then one approach
is to create a subdirectory under the application, e.g. \c
appdir/plugins/designer, and place the plugin in that directory.

For \link designer-manual.book TQt Designer\endlink, you may need to
call QApplication::addLibraryPath("TQTDIR/plugins/designer") to load
your \link designer-manual.book TQt Designer\endlink plugins.

<sup>*</sup><small> All references to \c{TQTDIR} refer to the path
where TQt was installed. </small>

\section1 Loading and Verifying Plugins

When loading plugins, the TQt library does some sanity checking to
determine whether or not the plugin can be loaded and used. This
provides the ability to have multiple versions and configurations of
the TQt library installed side by side.
\list
\i Plugins linked with a TQt library that has a higher major and/or
   minor version number will not be loaded by a library with a lower
   major and/or minor version number.

   \e Rationale:

   A plugin linked against a newer TQt library may use new
   features that are not available in older versions. Trolltech
   has a policy of adding new features and APIs only between minor
   releases, which is why this test only looks at the major and minor
   version numbers, and not at the patchlevel version number.

\i Plugins linked against a TQt library \e with thread support can only be
   loaded by libraries that are built \e with thread support.

   \e Rationale:

   The threaded and non-threaded TQt libraries have different names.
   A library \e with thread support that loads a plugin linked against a
   TQt library \e without thread support will cause two versions of the same
   library to be in memory at the same time. On UNIX systems, this
   causes the non-threaded TQt library to be loaded. When this
   happens, the constructors for all static objects in the TQt library
   will be called a second time, but they will operate on the objects
   already in memory. There is no way to work around this, as this is
   a feature of the object binary format: the static symbols already
   defined by the threaded TQt library cannot be replaced or copied
   when the non-threaded TQt library is loaded.

\i Plugins linked against a TQt library \e without thread support can only
   be loaded by libraries that are built \e without thread support.

   \e Rationale: 

   See the Rationale above.

\i Starting with TQt 3.0.5, both the TQt library and all plugins are
   built using a \e {build key}. The build key in the TQt library is
   examined against the build key in the plugin, and if they match,
   the plugin is loaded. If the build keys do not match, then the Qt
   library refuses to load the plugin.

   \e Rationale:

   See the Rationale for the build key below.
\endlist

\section1 The Build Key

The build key contains the following information:
\list
\i Architecture, operating system and compiler.

   \e Rationale:

   In cases where different versions of the same compiler do not
   produce binary compatible code, the version of the compiler is
   also present in the build key.

\i Configuration of the TQt library. The configuration is a list
   of the missing features that affect the available API in the
   library. 

   \e Rationale:

   Two different configurations of the same version of
   the TQt library are not binary compatible. The TQt library that
   loads the plugin uses the list of (missing) features to
   determine if the plugin is binary compatible.

   \e Note: There are cases where a plugin can use features that are
   available in two different configurations. However, the
   developer writing plugins would need to know which features are
   in use, both in their plugin and internally by the utility
   classes in Qt. The TQt library would require complex feature
   and dependency queries and verification when loading plugins.
   Requiring this would place an unnecessary burden on the developer, and
   increase the overhead of loading a plugin. To reduce both
   development time and application runtime costs, a simple string
   comparision of the build keys is used.

\i Optionally, an extra string may be specified on the configure
   script command line.
 
   \e Rationale:

   When distributing binaries of the TQt library with an
   application, this provides a way for developers to write
   plugins that can only be loaded by the library with which the
   plugins were linked.
\endlist

\section1 Plugins and Threaded Applications

If you want to build a plugin which you want to use with a threaded Qt
library (whether or not the plugin itself uses threads) you must use a
threaded environment. Specifically, you must link the plugin with a
threaded TQt library, and you must build \link designer-manual.book Qt
Designer\endlink with that library. Your \c{.pro} file for your plugin
must include the line:
\code
    CONFIG += thread
\endcode

\warning Do not mix the normal TQt library and the threaded TQt library in
an application. If your application uses the threaded TQt library, you
should not link your plugin with the normal TQt library. Nor should you
dynamically load the normal TQt library or dynamically load another library,
e.g. a plugin, that depends on the normal TQt library. On some systems,
mixing threaded and non-threaded libraries or plugins will corrupt the
static data used in the TQt library.

*/