Initial code import from https://www.trinity-look.org/p/1100374. As per note on the website, the code has been abandoned. There is no license file in the source code, but given the package was available on the KDE3 store back in the days, it is reasonable to assume it was distributed under GPL2 license

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

1 files changed, 668 insertions, 0 deletions

diff --git a/admin/cvs.sh b/admin/cvs.sh
new file mode 100644
index 0000000..8d3d285
--- /dev/null
+++ b/admin/cvs.sh
@@ -0,0 +1,668 @@
+#! /bin/sh
+#
+# cvs.sh
+#
+# This file contains support code from Makefile.common
+# It defines a shell function for each known target
+# and then does a case to call the correct function.
+
+call_and_fix_autoconf()
+{
+  $AUTOCONF || exit 1
+  if test -r configure.in.in ; then
+    perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\
+    \\n  perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\
+    \\\\\\n    || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\
+    \\n  rm -f \\\$CONFIG_STATUS.bak\\nfi\
+    \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/; s,^#line.*LINENO.*\$,/* \$& */, ;" configure
+  fi
+}
+
+strip_makefile()
+{
+  if test ! -f $makefile_wo; then
+    perl -e '$in=0; while ( <> ) { $in = 1 if ($_ =~ m/^if / ); print $_ unless ($in || $_ =~ m/^include /); $in = 0 if ($_ =~ m/^endif/); }' < $makefile_am > $makefile_wo
+  fi
+}
+
+check_autotool_versions()
+{
+required_autoconf_version="2.53 or newer"
+AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1`
+case $AUTOCONF_VERSION in
+  Autoconf*2.5* | autoconf*2.5* ) : ;;
+  "" )
+    echo "*** AUTOCONF NOT FOUND!."
+    echo "*** KDE requires autoconf $required_autoconf_version"
+    exit 1
+    ;;
+  * )
+    echo "*** YOU'RE USING $AUTOCONF_VERSION."
+    echo "*** KDE requires autoconf $required_autoconf_version"
+    exit 1
+    ;;
+esac
+ 
+AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1`
+case $AUTOHEADER_VERSION in
+  Autoconf*2.5* | autoheader*2.5* ) : ;;
+  "" )
+    echo "*** AUTOHEADER NOT FOUND!."
+    echo "*** KDE requires autoheader $required_autoconf_version"
+    exit 1
+    ;;
+  * )
+    echo "*** YOU'RE USING $AUTOHEADER_VERSION."
+    echo "*** KDE requires autoheader $required_autoconf_version"
+    exit 1
+    ;;
+esac
+
+AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1`
+required_automake_version="1.6.1 or newer"
+case $AUTOMAKE_STRING in
+  automake*1.5d* | automake*1.5* | automake*1.5-* )
+    echo "*** YOU'RE USING $AUTOMAKE_STRING."
+    echo "*** KDE requires automake $required_automake_version"
+    exit 1
+    ;;
+  automake*1.6.* | automake*1.7* | automake*1.8* ) : ;;
+  "" )
+    echo "*** AUTOMAKE NOT FOUND!."
+    echo "*** KDE requires automake $required_automake_version"
+    exit 1
+    ;;
+  unsermake* ) :
+    echo "*** YOU'RE USING UNSERMAKE."
+    echo "*** GOOD LUCK!! :)"
+    ;;
+  * )
+    echo "*** YOU'RE USING $AUTOMAKE_STRING."
+    echo "*** KDE requires automake $required_automake_version"
+    exit 1
+    ;;
+esac
+unset required_automake_version
+}
+
+cvs()
+{
+check_autotool_versions
+acinclude_m4 
+
+### Make new subdirs and configure.in.
+### The make calls could be optimized away here,
+### with a little thought.
+if test -r configure.in.in; then
+    rm -f configure.in
+    echo "*** Creating list of subdirectories"
+    create_subdirs
+
+    if test -r Makefile.am.in; then
+        echo "*** Creating Makefile.am"
+        if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then 
+            strip_makefile
+            $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1
+        else
+            Makefile_am
+        fi
+     fi
+     configure_files
+     echo "*** Creating configure.in"
+     if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then 
+       strip_makefile
+       $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1
+     else
+       configure_in
+     fi
+fi
+
+echo "*** Creating aclocal.m4"
+$ACLOCAL $ACLOCALFLAGS || exit 1
+echo "*** Creating configure"
+call_and_fix_autoconf
+
+if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
+  echo "*** Creating config.h template"
+  $AUTOHEADER || exit 1
+fi
+
+echo "*** Creating Makefile templates"
+$AUTOMAKE || exit 1
+if test -z "$UNSERMAKE"; then
+  echo "*** Postprocessing Makefile templates"
+  perl -w admin/am_edit || exit 1
+fi
+
+if egrep "^cvs-local:" $makefile_am >/dev/null; then \
+  strip_makefile
+  $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1
+fi
+
+echo "*** Creating date/time stamp"
+touch stamp-h.in
+
+echo "*** Finished"
+echo "    Don't forget to run ./configure"
+echo "    If you haven't done so in a while, run ./configure --help"
+}
+
+dist()
+{
+check_autotool_versions
+
+###
+### First build all of the files necessary to do just "make"
+###
+acinclude_m4
+if test -r configure.in.in; then
+  rm -f configure.in
+  create_subdirs
+
+  if test -r Makefile.am.in; then
+    if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then 
+      strip_makefile
+      $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1
+    else
+      Makefile_am
+    fi
+  fi
+  configure_files
+  if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then 
+    strip_makefile
+    $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1
+  else
+    configure_in
+  fi
+fi
+$ACLOCAL $ACLOCALFLAGS
+if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
+  echo "*** Creating config.h template"
+  $AUTOHEADER || exit 1
+fi
+$AUTOMAKE --foreign
+perl -w admin/am_edit
+call_and_fix_autoconf
+touch stamp-h.in
+if grep "^cvs-local:" $makefile_am >/dev/null; then
+  strip_makefile
+  $MAKE -f $makefile_wo cvs-local top_srcdir=.
+fi
+
+###
+### Then make messages
+###
+if test -d po; then
+ LIST=`find ./po -name "*.po"`
+ for i in $LIST; do
+  file2=`echo $i | sed -e "s#\.po#\.gmo#"`
+  msgfmt -o $file2 $i || touch $file2
+ done
+fi
+if grep "^cvs-dist-local:" $makefile_am >/dev/null; then
+  strip_makefile
+  $MAKE -f $makefile_wo cvs-dist-local top_srcdir=.
+fi
+}
+
+subdir_dist()
+{
+$ACLOCAL $ACLOCALFLAGS
+$AUTOHEADER
+$AUTOMAKE
+perl -w ../admin/am_edit --path=../admin
+call_and_fix_autoconf
+touch stamp-h.in
+}
+
+configure_in()
+{
+rm -f configure.in configure.in.new
+kde_use_qt_param=
+test -f configure.files || { echo "need configure.files for configure.in"; exit 1; }
+list=`fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"`
+: > configure.in.new
+for file in $list; do 
+  echo "dnl =======================================================" >> configure.in.new
+  echo "dnl FILE: $file" >> configure.in.new
+  echo "dnl =======================================================" >> configure.in.new
+  echo "" >> configure.in.new
+  cat $file >> configure.in.new
+done
+echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new
+if test -f Makefile.am.in; then
+  subdirs=`cat subdirs`
+  for dir in $subdirs; do
+    vdir=`echo $dir | sed -e 's,[-+.@],_,g'`
+    echo "AM_CONDITIONAL($vdir""_SUBDIR_included, test \"x\$$vdir""_SUBDIR_included\" = xyes)" >> configure.in.new
+    if test -f "$dir/configure.in"; then
+        echo "if test \"x\$$vdir""_SUBDIR_included\" = xyes; then " >> configure.in.new
+        echo "  AC_CONFIG_SUBDIRS($dir)" >> configure.in.new
+        echo "fi" >> configure.in.new
+    fi
+  done
+fi
+
+echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new
+if test -n "$UNSERMAKE"; then
+  echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new
+  echo "AC_CONFIG_FILES([ Makefile.calls ])" >> configure.in.new
+fi
+
+if test -f inst-apps; then
+    topleveldirs=`cat inst-apps`
+else
+    topleveldirs=
+    for dir in `ls -1d * | sort`; do
+	if test "$dir" != "debian" && test -d $dir; then
+	    topleveldirs="$topleveldirs $dir"
+	fi
+    done
+fi
+
+for topleveldir in $topleveldirs; do 
+  if test -f $topleveldir/configure.in; then
+	continue
+  fi
+  if test -f $topleveldir/Makefile.am; then :; else
+	continue
+  fi
+
+  mfs=`find $topleveldir -name Makefile.am -print | fgrep -v "/." | \
+       sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'`
+  for i in $mfs; do
+     echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new
+     if test -n "$UNSERMAKE"; then
+        echo "AC_CONFIG_FILES([ $i.rules ])" >> configure.in.new
+	echo "AC_CONFIG_FILES([ $i.calls ])" >> configure.in.new
+     fi
+  done
+done
+
+files=`cat configure.files`
+list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"`
+for file in $list; do 
+    echo "AC_CONFIG_FILES([ $file ])" >>  configure.in.new
+done
+
+if test -n "$UNSERMAKE"; then
+  echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new
+fi
+
+midfiles=`cat configure.files | fgrep "configure.in.mid"`
+test -n "$midfiles" && cat $midfiles >> configure.in.new
+
+echo "AC_OUTPUT" >> configure.in.new
+modulename=
+if test -f configure.in.in; then
+   if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then
+      kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"`
+   fi
+   if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then
+      line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in`
+      if test -n "$line"; then
+	  modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"`
+	  VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"`
+      fi
+      sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \
+          configure.in.new > configure.in && mv configure.in configure.in.new
+   fi
+fi
+if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then
+     VERSION="\"3.2.90\""
+fi
+if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then
+   modulename=`pwd`; 
+   modulename=`basename $modulename`
+   esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"`
+   modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"`   
+
+fi
+if test -n "$kde_use_qt_param"; then
+      sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \
+      	configure.in.new > configure.in && mv configure.in configure.in.new
+fi
+sed -e "s#@MODULENAME@#$modulename#" configure.in.new |
+	sed -e "s#@VERSION@#$VERSION#" > configure.in
+botfiles=`cat configure.files | egrep "configure.in.bot"`
+test -n "$botfiles" && cat $botfiles >> configure.in
+cat $admindir/configure.in.bot.end >> configure.in
+rm -f configure.in.new
+}
+
+configure_files()
+{
+echo "*** Creating configure.files"
+admindir=NO
+for i in . .. ../.. ../../..; do
+  if test -x $i/admin; then admindir=$i/admin; break; fi
+done
+rm -f configure.files
+touch configure.files
+if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then
+	echo $admindir/configure.in.min >> configure.files
+fi
+test -f configure.in.in && echo configure.in.in >> configure.files
+# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs
+if test -f inst-apps; then
+   inst=`cat inst-apps`
+   list=""
+   for i in $inst; do
+      list="$list `find $i/ -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \
+		sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`"
+   done
+else
+   list=`find . -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \
+		sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`
+fi
+for i in $list; do if test -f $i && test `dirname $i` != "." ; then
+  echo $i >> configure.files
+fi; done
+test -f configure.in.mid && echo configure.in.mid >> configure.files
+test -f configure.in.bot && echo configure.in.bot >> configure.files
+if test ! -s configure.files; then
+   echo "There are no files to build a configure. Please check your checkout."
+   exit 1
+fi
+}
+
+create_subdirs()
+{
+if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then 
+    # as many modules contain rules to create subdirs without any
+    # dependencies make won't create it unless there is no file.
+    # so we check if that's a dummy rule or one that works
+    rm -f subdirs.cvs.sh.$$
+    if test -f subdirs; then
+	mv subdirs subdirs.cvs.sh.$$
+    fi
+    strip_makefile
+    $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1
+    if test -f subdirs.cvs.sh.$$; then
+	if test -s subdirs; then
+	    rm subdirs.cvs.sh.$$ 
+	else
+	    mv subdirs.cvs.sh.$$ subdirs
+	fi
+    fi
+else
+    subdirs
+fi
+}
+
+subdirs()
+{
+dirs=
+idirs=
+if test -f inst-apps; then
+   idirs=`cat inst-apps`
+else
+   idirs=`ls -1 | sort`
+fi
+
+compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1`
+compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1`
+for i in $idirs; do
+    if test -f $i/Makefile.am; then
+       case " $compilefirst $compilelast " in
+         *" $i "*) ;;
+         *) dirs="$dirs $i"
+       esac
+    fi
+done
+
+: > ./_SUBDIRS
+
+for d in $compilefirst; do
+   echo $d >> ./_SUBDIRS
+done
+
+(for d in $dirs; do 
+   list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1`
+   for s in $list; do
+      echo $s $d
+   done
+   list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1`
+   for s in $list; do
+      echo $d $s
+   done
+   echo $d $d
+done ) | tsort >> ./_SUBDIRS
+
+for d in $compilelast; do
+   echo $d >> ./_SUBDIRS
+done
+
+if test -r subdirs && cmp -s subdirs _SUBDIRS; then
+    rm -f _SUBDIRS
+fi
+test -r _SUBDIRS && mv _SUBDIRS subdirs || true
+}
+
+Makefile_am()
+{
+if test -f Makefile.am.in; then
+  compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1`
+  compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1`
+
+  idirs=
+  dirs=
+  if test -f inst-apps; then
+     idirs=`cat inst-apps`
+  else
+     idirs=`cat subdirs`
+  fi
+  for i in $idirs; do
+    case " $compilefirst $compilelast " in
+      *" $i "*) ;;
+      *) dirs="$dirs $i"
+    esac
+  done
+
+  adds=`fgrep '$(top_srcdir)/acinclude.m4:' Makefile.am.in | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir)/,,g'`
+  if echo "$adds" | fgrep "*" >/dev/null ; then
+    adds=`ls -d -1 $adds 2>/dev/null`
+    fgrep -v  '$(top_srcdir)/acinclude.m4:' Makefile.am.in > Makefile.am.in.adds
+    str='$(top_srcdir)/acinclude.m4:'
+    for add in $adds; do 
+	str="$str \$(top_srcdir)/$add"
+    done
+    echo $str >> Makefile.am.in.adds
+  else
+    cat Makefile.am.in > Makefile.am.in.adds
+  fi
+
+  if test -n "$UNSERMAKE"; then
+    cat Makefile.am.in.adds > Makefile.am
+    topsubdirs=
+    for i in $compilefirst $dirs $compilelast; do
+       vari=`echo $i | sed -e "s,[-+],_,g"`
+       echo "if $vari""_SUBDIR_included" >> Makefile.am
+       echo "$vari""_SUBDIR=$i" >> Makefile.am
+       echo "endif" >> Makefile.am
+       topsubdirs="$topsubdirs \$($vari""_SUBDIR)"
+    done
+    echo "SUBDIRS=$topsubdirs" >> Makefile.am
+  else
+    cat Makefile.am.in.adds | \
+        sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \
+        sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am
+    echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am
+  fi
+  rm Makefile.am.in.adds
+fi
+}
+
+acinclude_m4()
+{
+  echo "*** Creating acinclude.m4"
+  adds=
+  if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then 
+    strip_makefile
+    rm -f acinclude.m4
+    adds=`grep '\$(top_srcdir)/acinclude.m4:' $makefile_wo | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir),.,g'`
+    if echo $adds | fgrep "*" >/dev/null ; then
+      adds=`ls -d -1 $adds 2>/dev/null`
+    else
+      $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 || exit 1
+    fi
+  else
+    rm -f acinclude.m4
+  fi
+  # if it wasn't created up to now, then we do it better
+  if test ! -f acinclude.m4; then
+     cat admin/acinclude.m4.in admin/libtool.m4.in $adds > acinclude.m4
+  fi
+}
+
+cvs_clean()
+{
+if test -d CVS; then :; else
+  echo "You don't have a toplevel CVS directory."
+  echo "You most certainly didn't use cvs to get these sources."
+  echo "But this function depends on cvs's information."
+  exit 1
+fi
+perl $admindir/cvs-clean.pl
+}
+
+package_merge()
+{
+catalogs=$POFILES
+for cat in $catalogs; do
+  msgmerge -o $cat.new $cat $PACKAGE.pot
+  if test -s $cat.new; then
+    grep -v "\"POT-Creation" $cat.new > $cat.new.2
+    grep -v "\"POT-Creation" $cat >> $cat.new.1
+    if diff $cat.new.1 $cat.new.2; then
+	rm $cat.new
+    else
+	mv $cat.new $cat
+    fi
+    rm -f $cat.new.1 $cat.new.2
+  fi
+done
+}
+
+package_messages()
+{
+rm -rf po.backup
+mkdir po.backup
+
+for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
+  egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i
+  cat po/$i > po.backup/backup_$i
+  touch -r po/$i po.backup/backup_$i
+  rm po/$i
+done
+
+podir=${podir:-$PWD/po}
+files=`find . -name Makefile.am | xargs egrep -l '^messages:' `
+dirs=`for i in $files; do echo \`dirname $i\`; done`
+tmpname="$PWD/messages.log"
+if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi
+if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi
+export EXTRACTRC PREPARETIPS
+
+for subdir in $dirs; do
+  test -z "$VERBOSE" || echo "Making messages in $subdir"
+  (cd $subdir
+   if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then
+	$EXTRACTRC *.rc *.ui *.kcfg > rc.cpp
+   else
+	candidates=`ls -1 *.rc *.ui *.kcfg 2>/dev/null`
+	if test -n "$candidates"; then
+	    echo "$subdir has *.rc, *.ui or *.kcfg files, but not correct messages line"
+	fi
+   fi
+   if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then
+	echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp
+   else echo " " > _translatorinfo.cpp
+   fi
+   perl -e '$mes=0; while (<STDIN>) { next if (/^(if\s|else\s|endif)/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile
+
+   $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \
+	XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -kaliasLocale -x ${includedir:-${KDEDIR:-/usr/local/kde}/include}/kde.pot" \
+	messages 
+   exit_code=$?
+   if test "$exit_code" != 0; then
+       echo "make exit code: $exit_code"
+   fi
+   ) 2>&1 | grep -v '^make\[1\]' > $tmpname
+   test -s $tmpname && { echo $subdir ; cat "$tmpname"; }
+   test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp
+   rm -f $subdir/_translatorinfo.cpp
+   rm -f $subdir/_transMakefile
+done
+rm -f $tmpname
+for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do
+  test -f po/$i || echo "disappeared: $i"
+done
+for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
+   sed -e 's,^"Content-Type: text/plain; charset=CHARSET\\n"$,"Content-Type: text/plain; charset=UTF-8\\n",' po/$i > po/$i.new && mv po/$i.new po/$i
+   msgmerge -q -o po/$i po/$i po/$i
+   egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot
+  if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then
+	echo "will update $i"
+        sed -e 's,^"Content-Type: text/plain; charset=CHARSET\\n"$,"Content-Type: text/plain; charset=UTF-8\\n",' po.backup/$backup_$i > po/$i.new && mv po/$i.new po.backup/backup_$i
+	msgmerge -q po.backup/backup_$i po/$i > temp.pot
+	mv temp.pot po/$i
+  else
+    if test -f po.backup/backup_$i; then
+      test -z "$VERBOSE" || echo "I'm restoring $i"
+      mv po.backup/backup_$i po/$i
+      rm po.backup/$i
+    else
+      echo "will add $i"
+    fi
+  fi
+done
+rm -f temp.pot
+rm -rf po.backup
+}
+
+unset LC_ALL || :
+unset LANG || :
+unset LC_CTYPE || :
+unset LANGUAGE || :
+
+unset CDPATH || :
+admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'`
+test "x$admindir" = "x$0" && admindir=.
+
+test "x$MAKE" = x && MAKE=make
+makefile_am=Makefile.am
+makefile_wo=Makefile.am.wo
+if test -f Makefile.am.in; then
+  makefile_am=Makefile.am.in
+  makefile_wo=Makefile.am.in.wo
+  rm -f $makefile_wo
+fi
+
+# Suck in the AUTOCONF detection code
+. $admindir/detect-autoconf.sh
+
+###
+### Main
+###
+
+arg=`echo $1 | tr '\-.' __`
+case $arg in
+  cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \
+  cvs_clean | package_merge | package_messages | Makefile_am | acinclude_m4 ) $arg ;;
+  configure ) call_and_fix_autoconf ;;
+  * ) echo "Usage: cvs.sh <target>"
+      echo "Target can be one of:"
+      echo "    cvs cvs-clean dist"
+      echo "    configure.in configure.files"
+      echo "    package-merge package-messages"
+      echo ""
+      echo "Usage: anything but $1"
+      exit 1 ;;
+esac
+
+if test -f $makefile_wo; then
+  rm $makefile_wo
+fi
+
+exit 0