diff options
Diffstat (limited to 'admin/cvs.sh')
| -rw-r--r-- | admin/cvs.sh | 594 |
1 files changed, 0 insertions, 594 deletions
diff --git a/admin/cvs.sh b/admin/cvs.sh deleted file mode 100644 index 173eca7..0000000 --- a/admin/cvs.sh +++ /dev/null @@ -1,594 +0,0 @@ -#! /bin/sh -# -# cvs.sh -# -# This file contains support code from Makefile.common -# It defines a shell function for each known target -# and then does a case to call the correct function. - -call_and_fix_autoconf() -{ - $AUTOCONF || exit 1 - if test -r configure.in.in ; then - perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\ - \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\ - \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\ - \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\ - \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/;" configure - fi -} - -strip_makefile() -{ - if test -f $makefile_wo; then :; else - perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo - fi -} - -check_autotool_versions() -{ -AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1` -case $AUTOCONF_VERSION in - Autoconf*2.5* | autoconf*2.5* ) : ;; - "" ) - echo "*** AUTOCONF NOT FOUND!." - echo "*** KDE requires autoconf 2.52, 2.53 or 2.54" - exit 1 - ;; - * ) - echo "*** YOU'RE USING $AUTOCONF_VERSION." - echo "*** KDE requires autoconf 2.52, 2.53 or 2.54" - exit 1 - ;; -esac - -AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1` -case $AUTOHEADER_VERSION in - Autoconf*2.5* | autoheader*2.5* ) : ;; - "" ) - echo "*** AUTOHEADER NOT FOUND!." - echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)" - exit 1 - ;; - * ) - echo "*** YOU'RE USING $AUTOHEADER_VERSION." - echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)" - exit 1 - ;; -esac - -AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` -case $AUTOMAKE_STRING in - automake*1.5d* | automake*1.5* | automake*1.5-* ) - echo "*** YOU'RE USING $AUTOMAKE_STRING." - echo "*** KDE requires automake 1.6.1 or newer" - exit 1 - ;; - automake*1.6.* | automake*1.7* ) : ;; - "" ) - echo "*** AUTOMAKE NOT FOUND!." - echo "*** KDE requires automake 1.6.1 or newer" - exit 1 - ;; - unsermake* ) : - echo "*** YOU'RE USING UNSERMAKE." - echo "*** GOOD LUCK!! :)" - ;; - * ) - echo "*** YOU'RE USING $AUTOMAKE_STRING." - echo "*** KDE requires automake 1.6" - exit 1 - ;; -esac -} - -cvs() -{ -check_autotool_versions - -### Produce acinclude.m4 -if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then - echo "*** Creating acinclude.m4" - rm -f acinclude.m4 configure.files - - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 -fi - -### Make new subdirs and configure.in. -### The make calls could be optimized away here, -### with a little thought. -if test -r configure.in.in; then - rm -f configure.in - echo "*** Creating list of subdirectories" - create_subdirs - - if test -r Makefile.am.in; then - echo "*** Creating Makefile.am" - if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 - else - Makefile_am - fi - fi - echo "*** Creating configure.in" - configure_files - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 -fi - -echo "*** Creating aclocal.m4" -$ACLOCAL || exit 1 -echo "*** Creating configure" -call_and_fix_autoconf - -if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then - echo "*** Creating config.h template" - $AUTOHEADER || exit 1 -fi - -echo "*** Creating Makefile templates" -$AUTOMAKE || exit 1 -if test -z "$UNSERMAKE"; then - echo "*** Postprocessing Makefile templates" - perl -w admin/am_edit || exit 1 -fi - -if egrep "^cvs-local:" $makefile_am >/dev/null; then \ - strip_makefile - $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1 -fi - -echo "*** Creating date/time stamp" -touch stamp-h.in - -echo "*** Finished" -echo " Don't forget to run ./configure" -echo " If you haven't done so in a while, run ./configure --help" -} - -dist() -{ -check_autotool_versions - -### -### First build all of the files necessary to do just "make" -### -if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 -fi -if test -r configure.in.in; then - create_subdirs - Makefile_am - configure_files - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./configure.in -fi -$ACLOCAL -$AUTOHEADER -$AUTOMAKE --foreign --include-deps -perl -w admin/am_edit -call_and_fix_autoconf -touch stamp-h.in -if grep "^cvs-local:" $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo cvs-local top_srcdir=. -fi - -### -### Then make messages -### -if test -d po; then - LIST=`find ./po -name "*.po"` - for i in $LIST; do - file2=`echo $i | sed -e "s#\.po#\.gmo#"` - msgfmt -o $file2 $i || touch $file2 - done -fi -if grep "^cvs-dist-local:" $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo cvs-dist-local top_srcdir=. -fi -} - -subdir_dist() -{ -$ACLOCAL -$AUTOHEADER -$AUTOMAKE -perl -w ../admin/am_edit -call_and_fix_autoconf -touch stamp-h.in -} - -configure_in() -{ -rm -f configure.in configure.in.new -kde_use_qt_param= -test -f configure.files || { echo "need configure.files for configure.in"; exit 1; } -cat `fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` > configure.in.new -echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new -if test -f Makefile.am.in; then - subdirs=`cat subdirs` - for dir in $subdirs; do - dir=`echo $dir | sed -e "s,[-+.],_,g"` - echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new - done -fi - -echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new -if test -n "$UNSERMAKE"; then - echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new - echo "AC_CONFIG_FILES([ Makefile.calls ])" >> configure.in.new -fi - -if test -f inst-apps; then - topleveldirs=`cat inst-apps` -else - topleveldirs= - for dir in `ls -1d * | sort`; do - if test "$dir" != "debian" && test -d $dir; then - topleveldirs="$topleveldirs $dir" - fi - done -fi - -for topleveldir in $topleveldirs; do - if test -f $topleveldir/configure.in; then - continue - fi - if test -f $topleveldir/Makefile.am; then :; else - continue - fi - - mfs=`find $topleveldir -name Makefile.am -print | fgrep -v "/." | \ - sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'` - for i in $mfs; do - echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new - if test -n "$UNSERMAKE"; then - echo "AC_CONFIG_FILES([ $i.rules ])" >> configure.in.new - echo "AC_CONFIG_FILES([ $i.calls ])" >> configure.in.new - fi - done -done - -files=`cat configure.files` -list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"` -for file in $list; do - echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new -done - -if test -n "$UNSERMAKE"; then - echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new -fi - -midfiles=`cat configure.files | fgrep "configure.in.mid"` -test -n "$midfiles" && cat $midfiles >> configure.in.new - -echo "AC_OUTPUT" >> configure.in.new -modulename= -if test -f configure.in.in; then - if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then - kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"` - fi - if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then - line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in` - if test -n "$line"; then - modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` - VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` - fi - sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \ - configure.in.new > configure.in && mv configure.in configure.in.new - fi -fi -if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then - VERSION="\"3.1.0\"" -fi -if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then - modulename=`pwd`; - modulename=`basename $modulename` - esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"` - modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"` - -fi -if test -n "$kde_use_qt_param"; then - sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \ - configure.in.new > configure.in && mv configure.in configure.in.new -fi -sed -e "s#@MODULENAME@#$modulename#" configure.in.new | - sed -e "s#@VERSION@#$VERSION#" > configure.in -botfiles=`cat configure.files | egrep "configure.in.bot"` -test -n "$botfiles" && cat $botfiles >> configure.in -cat $admindir/configure.in.bot.end >> configure.in -rm -f configure.in.new -} - -configure_files() -{ -admindir=NO -for i in . .. ../.. ../../..; do - if test -x $i/admin; then admindir=$i/admin; break; fi -done -rm -f configure.files -touch configure.files -if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then - echo $admindir/configure.in.min >> configure.files -fi -test -f configure.in.in && echo configure.in.in >> configure.files -# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs -if test -f inst-apps; then - inst=`cat inst-apps` - list="" - for i in $inst; do - list="$list `find $i/ -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ - sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`" - done -else - list=`find . -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ - sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"` -fi -for i in $list; do if test -f $i && test `dirname $i` != "." ; then - echo $i >> configure.files -fi; done -test -f configure.in.mid && echo configure.in.mid >> configure.files -test -f configure.in.bot && echo configure.in.bot >> configure.files -} - -create_subdirs() -{ -if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then - # as many modules contain rules to create subdirs without any - # dependencies make won't create it unless there is no file. - # so we check if that's a dummy rule or one that works - rm -f subdirs.cvs.sh.$$ - if test -f subdirs; then - mv subdirs subdirs.cvs.sh.$$ - fi - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1 - if test -f subdirs.cvs.sh.$$; then - if test -s subdirs; then - rm subdirs.cvs.sh.$$ - else - mv subdirs.cvs.sh.$$ subdirs - fi - fi -else - subdirs -fi -} - -subdirs() -{ -dirs= -idirs= -if test -f inst-apps; then - idirs=`cat inst-apps` -else - idirs=`ls -1 | sort` -fi - -compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` -compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` -for i in $idirs; do - if test -f $i/Makefile.am; then - case " $compilefirst $compilelast " in - *" $i "*) ;; - *) dirs="$dirs $i" - esac - fi -done - -: > ./_SUBDIRS - -for d in $compilefirst; do - echo $d >> ./_SUBDIRS -done - -(for d in $dirs; do - list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` - for s in $list; do - echo $s $d - done - list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` - for s in $list; do - echo $d $s - done - echo $d $d -done ) | tsort >> ./_SUBDIRS - -for d in $compilelast; do - echo $d >> ./_SUBDIRS -done - -if test -r subdirs && cmp -s subdirs _SUBDIRS; then - rm -f _SUBDIRS -fi -test -r _SUBDIRS && mv _SUBDIRS subdirs || true -} - -Makefile_am() -{ -if test -f Makefile.am.in; then - compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` - compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` - - idirs= - dirs= - if test -f inst-apps; then - idirs=`cat inst-apps` - else - idirs=`cat subdirs` - fi - for i in $idirs; do - case " $compilefirst $compilelast " in - *" $i "*) ;; - *) dirs="$dirs $i" - esac - done - - if test -n "$UNSERMAKE"; then - cp Makefile.am.in Makefile.am - topsubdirs= - for i in $compilefirst $dirs $compilelast; do - vari=`echo $i | sed -e "s,[-+],_,g"` - echo "if $vari""_SUBDIR_included" >> Makefile.am - echo "$vari""_SUBDIR=$i" >> Makefile.am - echo "endif" >> Makefile.am - topsubdirs="$topsubdirs \$($vari""_SUBDIR)" - done - echo "SUBDIRS=$topsubdirs" >> Makefile.am - else - cat Makefile.am.in | \ - sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \ - sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am - echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am - fi -fi -} - -cvs_clean() -{ -if test -d CVS; then :; else - echo "You don't have a toplevel CVS directory." - echo "You most certainly didn't use cvs to get these sources." - echo "But this function depends on cvs's information." - exit 1 -fi -perl $admindir/cvs-clean.pl -} - -package_merge() -{ -catalogs=$POFILES -for cat in $catalogs; do - msgmerge -o $cat.new $cat $PACKAGE.pot - if test -s $cat.new; then - grep -v "\"POT-Creation" $cat.new > $cat.new.2 - grep -v "\"POT-Creation" $cat >> $cat.new.1 - if diff $cat.new.1 $cat.new.2; then - rm $cat.new - else - mv $cat.new $cat - fi - rm -f $cat.new.1 $cat.new.2 - fi -done -} - -package_messages() -{ -rm -rf po.backup -mkdir po.backup - -for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do - egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i - cp po/$i po.backup/backup_$i - touch -r po/$i po.backup/backup_$i - rm po/$i -done - -podir=${podir:-$PWD/po} -files=`find . -name Makefile.am | xargs egrep -l '^messages:' ` -dirs=`for i in $files; do echo \`dirname $i\`; done` -tmpname="$PWD/messages.log" -if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi -if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi -export EXTRACTRC PREPARETIPS - -for subdir in $dirs; do - test -z "$VERBOSE" || echo "Making messages in $subdir" - (cd $subdir - if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then - $EXTRACTRC *.rc *.ui > rc.cpp - else - candidates=`ls -1 *.rc *.ui 2>/dev/null` - if test -n "$candidates"; then - echo "$subdir has *.rc or *.ui files, but not correct messages line" - fi - fi - if test -n "`grep -r TDEAboutData *.c* *.C* 2>/dev/null`"; then - echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp - else echo " " > _translatorinfo.cpp - fi - perl -e '$mes=0; while (<STDIN>) { next if (/^(if|else|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile - - $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \ - XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-${TDEDIR:-/usr/local/kde}/include}/kde.pot" \ - messages - exit_code=$? - if test "$exit_code" != 0; then - echo "make exit code: $exit_code" - fi - ) 2>&1 | grep -v '^make\[1\]' > $tmpname - test -s $tmpname && { echo $subdir ; cat "$tmpname"; } - test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp - rm -f $subdir/_translatorinfo.cpp - rm -f $subdir/_transMakefile -done -rm -f $tmpname -for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do - test -f po/$i || echo "disappeared: $i" -done -for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do - msgmerge -q -o po/$i po/$i po/$i - egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot - if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then - echo "will update $i" - msgmerge -q po.backup/backup_$i po/$i > temp.pot - mv temp.pot po/$i - else - if test -f po.backup/backup_$i; then - test -z "$VERBOSE" || echo "I'm restoring $i" - mv po.backup/backup_$i po/$i - rm po.backup/$i - else - echo "will add $i" - fi - fi -done -rm -f temp.pot -rm -rf po.backup -} - -unset CDPATH -admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'` -test "x$admindir" = "x$0" && admindir=. - -test "x$MAKE" = x && MAKE=make -makefile_am=Makefile.am -makefile_wo=Makefile.am -if test -f Makefile.am.in; then - makefile_am=Makefile.am.in - makefile_wo=Makefile.am.in.wo -fi - -# Suck in the AUTOCONF detection code -. $admindir/detect-autoconf.sh - -### -### Main -### - -arg=`echo $1 | tr '\-.' __` -case $arg in - cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \ - cvs_clean | package_merge | package_messages | Makefile_am ) $arg ;; - configure ) call_and_fix_autoconf ;; - * ) echo "Usage: cvs.sh <target>" - echo "Target can be one of:" - echo " cvs cvs-clean dist" - echo " configure.in configure.files" - echo " package-merge package-messages" - echo "" - echo "Usage: anything but $1" - exit 1 ;; -esac - -if test -f Makefile.am.in.wo; then - rm Makefile.am.in.wo -fi - -exit 0 |