Removed unnecessary and/or TDE-unrelated code.

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>
Signed-off-by: Slávek Banko <slavek.banko@axis.cz>

1 files changed, 0 insertions, 3388 deletions

diff --git a/tqtinterface/qt4/src/kernel/tqdragobject.cpp b/tqtinterface/qt4/src/kernel/tqdragobject.cpp
deleted file mode 100644
index c062bfd..0000000
--- a/tqtinterface/qt4/src/kernel/tqdragobject.cpp
+++ /dev/null
@@ -1,3388 +0,0 @@
-#include "tqtglobaldefines.h"
-
-// #ifdef USE_QT4
-#if 0
-
-/****************************************************************************
-**
-** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
-** All rights reserved.
-** Contact: Nokia Corporation (qt-info@nokia.com)
-**
-** This file is part of the Qt3Support module of the Qt Toolkit.
-**
-** $QT_BEGIN_LICENSE:LGPL$
-** Commercial Usage
-** Licensees holding valid Qt Commercial licenses may use this file in
-** accordance with the Qt Commercial License Agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Nokia.
-**
-** GNU Lesser General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU Lesser
-** General Public License version 2.1 as published by the Free Software
-** Foundation and appearing in the file LICENSE.LGPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU Lesser General Public License version 2.1 requirements
-** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
-**
-** In addition, as a special exception, Nokia gives you certain additional
-** rights.  These rights are described in the Nokia Qt LGPL Exception
-** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
-**
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
-** If you have questions regarding the use of this file, please contact
-** Nokia at qt-info@nokia.com.
-** $QT_END_LICENSE$
-**
-****************************************************************************/
-
-#include "qplatformdefs.h"
-
-#ifndef QT_NO_MIME
-
-#include "tqdragobject.h"
-#include "qpixmap.h"
-#include "qevent.h"
-#include "qfile.h"
-#include "qtextcodec.h"
-#include "qapplication.h"
-#include "qpoint.h"
-#include "qwidget.h"
-#include "qbuffer.h"
-#include "qimagereader.h"
-#include "qimagewriter.h"
-#include "qimage.h"
-#include "qregexp.h"
-#include "qdir.h"
-#include "qdrag.h"
-#include "tqstrlist.h"
-#include "tqcstring.h"
-
-// #include <private/qobject_p.h>
-
-#include <ctype.h>
-#if defined(Q_OS_WINCE)
-#include <winsock.h>
-#include "qfunctions_wince.h"
-#endif
-
-QT_BEGIN_NAMESPACE
-
-static QWidget *last_target = 0;
-
-class QDragMime;
-
-class TQDragObjectPrivate : public TQObjectPrivate
-{
-    Q_DECLARE_PUBLIC(TQDragObject)
-public:
-    TQDragObjectPrivate(): hot(0,0),pm_cursor(0) {}
-    QPixmap pixmap;
-    QPoint hot;
-    // store default cursors
-    QPixmap *pm_cursor;
-};
-
-class TQTextDragPrivate : public TQDragObjectPrivate
-{
-    Q_DECLARE_PUBLIC(TQTextDrag)
-public:
-    TQTextDragPrivate() { setSubType(QLatin1String("plain")); }
-    void setSubType(const QString & st) {
-        subtype = st;
-        fmt = "text/" + subtype.toLatin1();
-    }
-
-    QString txt;
-    QString subtype;
-    QByteArray fmt;
-};
-
-class TQStoredDragPrivate : public TQDragObjectPrivate
-{
-    Q_DECLARE_PUBLIC(TQStoredDrag)
-public:
-    TQStoredDragPrivate() {}
-    const char* fmt;
-    QByteArray enc;
-};
-
-class TQImageDragPrivate : public TQDragObjectPrivate
-{
-    Q_DECLARE_PUBLIC(TQImageDrag)
-public:
-    TQImage img;
-    QList<QByteArray> ofmts;
-};
-
-class QDragMime : public QMimeData
-{
-public:
-    QDragMime(TQDragObject *parent) : QMimeData(), dragObject(parent) { }
-    ~QDragMime();
-
-    QByteArray data(const QString &mimetype) const;
-    bool hasFormat(const QString &mimetype) const;
-    QStringList formats() const;
-
-    QPointer<TQDragObject> dragObject;
-};
-
-QDragMime::~QDragMime()
-{
-    delete dragObject;
-}
-QByteArray QDragMime::data(const QString &mimetype) const
-{
-    return dragObject->encodedData(mimetype.latin1());
-}
-
-bool QDragMime::hasFormat(const QString &mimetype) const
-{
-    return dragObject->provides(mimetype.latin1());
-}
-
-QStringList QDragMime::formats() const
-{
-    int i = 0;
-    const char *format;
-    QStringList f;
-    while ((format = dragObject->format(i))) {
-        f.append(QLatin1String(format));
-        ++i;
-    }
-    return f;
-}
-
-/*!
-    Constructs a drag object called \a name with a parent \a
-    dragSource.
-
-    Note that the drag object will be deleted when the \a dragSource is
-    deleted.
-*/
-
-TQDragObject::TQDragObject(QWidget * dragSource, const char * name)
-    :TQObject(*(new TQDragObjectPrivate), dragSource)
-{
-    setObjectName(QLatin1String(name));
-}
-
-/*! \internal */
-TQDragObject::TQDragObject(TQDragObjectPrivate &dd, QWidget *dragSource)
-    :TQObject(dd, dragSource)
-{
-}
-
-/*!
-    Destroys the drag object, canceling any drag and drop operation in
-    which it is involved.
-*/
-
-TQDragObject::~TQDragObject()
-{
-}
-
-#ifndef QT_NO_DRAGANDDROP
-/*!
-    Set the pixmap, \a pm, to display while dragging the object. The
-    platform-specific implementation will use this where it can - so
-    provide a small masked pixmap, and do not assume that the user
-    will actually see it.
-
-    The \a hotspot is the point on (or off) the pixmap that should be
-    under the cursor as it is dragged. It is relative to the top-left
-    pixel of the pixmap.
-
-    \warning We have seen problems with drag cursors on different
-    graphics hardware and driver software on Windows. Setting the
-    graphics acceleration in the display settings down one tick solved
-    the problems in all cases.
-*/
-void TQDragObject::setPixmap(QPixmap pm, const QPoint& hotspot)
-{
-    Q_D(TQDragObject);
-    d->pixmap = pm;
-    d->hot = hotspot;
-}
-
-/*!
-    \overload
-
-    Uses a hotspot that positions the pixmap below and to the right of
-    the mouse pointer. This allows the user to clearly see the point
-    on the window where they are dragging the data.
-*/
-void TQDragObject::setPixmap(QPixmap pm)
-{
-    setPixmap(pm,QPoint(-10, -10));
-}
-
-/*!
-    Returns the currently set pixmap, or a null pixmap if none is set.
-
-    \sa QPixmap::isNull()
-*/
-QPixmap TQDragObject::pixmap() const
-{
-    return d_func()->pixmap;
-}
-
-/*!
-    Returns the currently set pixmap hotspot.
-
-    \sa setPixmap()
-*/
-QPoint TQDragObject::pixmapHotSpot() const
-{
-    return d_func()->hot;
-}
-
-/*!
-    Starts a drag operation using the contents of this object, using
-    DragDefault mode.
-
-    The function returns true if the caller should delete the original
-    copy of the dragged data (but see target()); otherwise returns
-    false.
-
-    If the drag contains \e references to information (e.g. file names
-    in a TQUriDrag are references) then the return value should always
-    be ignored, as the target is expected to directly manipulate the
-    content referred to by the drag object. On X11 the return value should
-    always be correct anyway, but on Windows this is not necessarily
-    the case; e.g. the file manager starts a background process to
-    move files, so the source \e{must not} delete the files!
-
-    Note that on Windows the drag operation will start a blocking modal
-    event loop that will not dispatch any QTimers.
-*/
-bool TQDragObject::drag()
-{
-    return drag(DragDefault);
-}
-
-/*!
-    After the drag completes, this function will return the QWidget
-   which received the drop, or 0 if the data was dropped on another
-    application.
-
-    This can be useful for detecting the case where drag and drop is
-    to and from the same widget.
-*/
-QWidget *TQDragObject::target()
-{
-    return last_target;
-}
-
-/*!
-    Starts a drag operation using the contents of this object, using
-    \c DragMove mode. Be sure to read the constraints described in
-    drag().
-
-    Returns true if the data was dragged as a \e move, indicating that
-    the caller should remove the original source of the data (the drag
-    object must continue to have a copy); otherwise returns false.
-
-    \sa drag() dragCopy() dragLink()
-*/
-bool TQDragObject::dragMove()
-{
-    return drag(DragMove);
-}
-
-
-/*!
-    Starts a drag operation using the contents of this object, using
-    \c DragCopy mode. Be sure to read the constraints described in
-    drag().
-
-    \sa drag() dragMove() dragLink()
-*/
-void TQDragObject::dragCopy()
-{
-    (void)drag(DragCopy);
-}
-
-/*!
-    Starts a drag operation using the contents of this object, using
-    \c DragLink mode. Be sure to read the constraints described in
-    drag().
-
-    \sa drag() dragCopy() dragMove()
-*/
-void TQDragObject::dragLink()
-{
-    (void)drag(DragLink);
-}
-
-
-/*!
-    \enum TQDragObject::DragMode
-
-    This enum describes the possible drag modes.
-
-    \value DragDefault     The mode is determined heuristically.
-    \value DragCopy        The data is copied.
-    \value DragMove        The data is moved.
-    \value DragLink        The data is linked.
-    \value DragCopyOrMove  The user chooses the mode by using the
-                           \key{Shift} key to switch from the default
-                           copy mode to move mode.
-*/
-
-
-/*!
-    \overload
-    Starts a drag operation using the contents of this object.
-
-    At this point, the object becomes owned by Qt, not the
-    application. You should not delete the drag object or anything it
-    references. The actual transfer of data to the target application
-    will be done during future event processing - after that time the
-    drag object will be deleted.
-
-    Returns true if the dragged data was dragged as a \e move,
-    indicating that the caller should remove the original source of
-    the data (the drag object must continue to have a copy); otherwise
-    returns false.
-
-    The \a mode specifies the drag mode (see
-    \l{TQDragObject::DragMode}.) Normally one of the simpler drag(),
-    dragMove(), or dragCopy() functions would be used instead.
-*/
-bool TQDragObject::drag(DragMode mode)
-{
-    Q_D(TQDragObject);
-    QDragMime *data = new QDragMime(this);
-    int i = 0;
-    const char *fmt;
-    while ((fmt = format(i))) {
-        data->setData(QLatin1String(fmt), encodedData(fmt));
-        ++i;
-    }
-
-    QDrag *drag = new QDrag(qobject_cast<QWidget *>(parent()));
-    drag->setMimeData(data);
-    drag->setPixmap(d->pixmap);
-    drag->setHotSpot(d->hot);
-
-    Qt::DropActions allowedOps;
-    Qt::DropAction defaultOp = Qt::IgnoreAction;
-    switch(mode) {
-    default:
-    case DragDefault:
-    case DragCopyOrMove:
-        allowedOps = Qt::CopyAction|Qt::MoveAction;
-        defaultOp = Qt::IgnoreAction;
-        break;
-    case DragCopy:
-        allowedOps = Qt::CopyAction;
-        defaultOp = Qt::CopyAction;
-        break;
-    case DragMove:
-        allowedOps = Qt::MoveAction;
-        defaultOp = Qt::MoveAction;
-        break;
-    case DragLink:
-        allowedOps = Qt::LinkAction;
-        defaultOp = Qt::LinkAction;
-        break;
-    }
-    bool retval = (drag->exec(allowedOps, defaultOp) == Qt::MoveAction);
-    last_target = drag->target();
-
-    return retval;
-}
-
-#endif
-
-
-/*!
-    Returns a pointer to the widget where this object originated (the drag
-    source).
-*/
-
-QWidget * TQDragObject::source()
-{
-    if (parent() && parent()->isWidgetType())
-        return (QWidget *)parent();
-    else
-        return 0;
-}
-
-
-/*!
-    \class TQDragObject
-
-    \brief The TQDragObject class encapsulates MIME-based data
-    transfer.
-
-    \compat
-
-    TQDragObject is the base class for all data that needs to be
-    transferred between and within applications, both for drag and
-    drop and for the clipboard.
-
-    See the \link dnd.html Drag and drop documentation\endlink for an
-    overview of how to provide drag and drop in your application.
-
-    See the QClipboard documentation for an overview of how to provide
-    cut and paste in your application.
-
-    The drag() function is used to start a drag operation. You can
-    specify the \l DragMode in the call or use one of the convenience
-    functions dragCopy(), dragMove(), or dragLink(). The drag source
-    where the data originated is retrieved with source(). If the data
-    was dropped on a widget within the application, target() will
-    return a pointer to that widget. Specify the pixmap to display
-    during the drag with setPixmap().
-*/
-
-static
-void stripws(QByteArray& s)
-{
-    int f;
-    while ((f = s.indexOf(' ')) >= 0)
-        s.remove(f,1);
-}
-
-/*!
-    \class TQTextDrag
-
-    \brief The TQTextDrag class is a drag and drop object for
-    transferring plain and Unicode text.
-
-    \compat
-
-    Plain text is passed in a QString which may contain multiple lines
-    (i.e. may contain newline characters). The drag target will receive
-    the newlines according to the runtime environment, e.g. LF on Unix,
-    and CRLF on Windows.
-
-    Qt provides no built-in mechanism for delivering only a single-line.
-
-    For more information about drag and drop, see the TQDragObject class
-    and the \link dnd.html drag and drop documentation\endlink.
-*/
-
-
-/*!
-    Constructs a text drag object with the given \a name, and sets its data
-    to \a text. The \a dragSource is the widget that the drag operation started
-    from.
-*/
-
-TQTextDrag::TQTextDrag(const QString &text, QWidget * dragSource, const char * name)
-    : TQDragObject(*new TQTextDragPrivate, dragSource)
-{
-    setObjectName(QLatin1String(name));
-    setText(text);
-}
-
-
-/*!
-    Constructs a default text drag object with the given \a name.
-    The \a dragSource is the widget that the drag operation started from.
-*/
-
-TQTextDrag::TQTextDrag(QWidget * dragSource, const char * name)
-    : TQDragObject(*(new TQTextDragPrivate), dragSource)
-{
-    setObjectName(QLatin1String(name));
-}
-
-/*! \internal */
-TQTextDrag::TQTextDrag(TQTextDragPrivate &dd, QWidget *dragSource)
-    : TQDragObject(dd, dragSource)
-{
-
-}
-
-/*!
-    Destroys the text drag object.
-*/
-TQTextDrag::~TQTextDrag()
-{
-
-}
-
-/*!
-    \fn void TQTextDrag::setSubtype(const QString &subtype)
-
-    Sets the MIME \a subtype of the text being dragged. The default subtype
-    is "plain", so the default MIME type of the text is "text/plain".
-    You might use this to declare that the text is "text/html" by calling
-    setSubtype("html").
-*/
-void TQTextDrag::setSubtype(const QString & st)
-{
-    d_func()->setSubType(st);
-}
-
-/*!
-    Sets the \a text to be dragged. You will need to call this if you did
-    not pass the text during construction.
-*/
-void TQTextDrag::setText(const QString &text)
-{
-    d_func()->txt = text;
-}
-
-
-/*!
-    \reimp
-*/
-const char * TQTextDrag::format(int i) const
-{
-    if (i > 0)
-        return 0;
-    return d_func()->fmt.constData();
-}
-
-QTextCodec* qt_findcharset(const QByteArray& mimetype)
-{
-    int i=mimetype.indexOf("charset=");
-    if (i >= 0) {
-        QByteArray cs = mimetype.mid(i+8);
-        stripws(cs);
-        i = cs.indexOf(';');
-        if (i >= 0)
-            cs = cs.left(i);
-        // May return 0 if unknown charset
-        return QTextCodec::codecForName(cs);
-    }
-    // no charset=, use locale
-    return QTextCodec::codecForName("utf-8");
-}
-
-static QTextCodec *codecForHTML(const QByteArray &ba)
-{
-    // determine charset
-    int mib = 0;
-    int pos;
-    QTextCodec *c = 0;
-
-    if (ba.size() > 1 && (((uchar)ba[0] == 0xfe && (uchar)ba[1] == 0xff)
-                          || ((uchar)ba[0] == 0xff && (uchar)ba[1] == 0xfe))) {
-        mib = 1015; // utf16
-    } else if (ba.size() > 2
-               && (uchar)ba[0] == 0xef
-               && (uchar)ba[1] == 0xbb
-               && (uchar)ba[2] == 0xbf) {
-        mib = 106; // utf-8
-    } else {
-        pos = 0;
-        while ((pos = ba.indexOf('<', pos)) != -1) {
-            int end = ba.indexOf('>', pos+1);
-            if (end == -1)
-                break;
-            const QString str(QString::fromLatin1(ba.mid(pos, end-pos)));
-            if (str.contains(QLatin1String("meta http-equiv="), Qt::CaseInsensitive)) {
-                pos = str.indexOf(QLatin1String("charset="), 0, Qt::CaseInsensitive) + int(strlen("charset="));
-                if (pos != -1) {
-                    int pos2 = ba.indexOf('\"', pos+1);
-                    QByteArray cs = ba.mid(pos, pos2-pos);
-                    c = QTextCodec::codecForName(cs);
-                    if (c)
-                        return c;
-                }
-            }
-            pos = end;
-        }
-    }
-    if (mib)
-        c = QTextCodec::codecForMib(mib);
-
-    return c;
-}
-
-static
-QTextCodec* findcodec(const QMimeSource* e)
-{
-    QTextCodec* r = 0;
-    const char* f;
-    int i;
-    for (i=0; (f=e->format(i)); i++) {
-        bool html = !qstrnicmp(f, "text/html", 9);
-        if (html)
-            r = codecForHTML(e->encodedData(f));
-        if (!r)
-            r = qt_findcharset(QByteArray(f).toLower());
-        if (r)
-            return r;
-    }
-    return 0;
-}
-
-
-
-/*!
-    \reimp
-*/
-QByteArray TQTextDrag::encodedData(const char* mime) const
-{
-    Q_D(const TQTextDrag);
-    if (mime != d->fmt)
-        return QByteArray();
-    return d->txt.toUtf8();
-}
-
-/*!
-    \fn bool TQTextDrag::canDecode(const QMimeSource *source)
-
-    Returns true if the information in the MIME \a source can be decoded
-    into a QString; otherwise returns false.
-
-    \sa decode()
-*/
-bool TQTextDrag::canDecode(const QMimeSource* e)
-{
-    const char* f;
-    for (int i=0; (f=e->format(i)); i++) {
-        if (0==qstrnicmp(f,"text/",5)) {
-            return findcodec(e) != 0;
-        }
-    }
-    return false;
-}
-
-/*!
-    \fn bool TQTextDrag::decode(const QMimeSource *source, QString &string, QString &subtype)
-
-    \overload
-
-    Attempts to decode the dropped information in the MIME \a source into
-    the \a string given.
-    Returns true if successful; otherwise returns false. If \a subtype
-    is null, any text subtype is accepted; otherwise only the
-    specified \a subtype is accepted.
-
-    \sa canDecode()
-*/
-bool TQTextDrag::decode(const QMimeSource* e, QString& str, QString& subtype)
-{
-    if(!e)
-        return false;
-
-    const char* mime;
-    for (int i=0; (mime = e->format(i)); i++) {
-        if (0==qstrnicmp(mime,"text/",5)) {
-            QByteArray m(mime);
-            m = m.toLower();
-            int semi = m.indexOf(';');
-            if (semi < 0)
-                semi = m.length();
-            QString foundst(QString::fromLatin1(m.mid(5,semi-5)));
-            if (subtype.isNull() || foundst == subtype) {
-                bool html = !qstrnicmp(mime, "text/html", 9);
-                QTextCodec* codec = 0;
-                if (html)
-                    // search for the charset tag in the HTML
-                    codec = codecForHTML(e->encodedData(mime));
-                if (!codec)
-                    codec = qt_findcharset(m);
-                if (codec) {
-                    QByteArray payload;
-
-                    payload = e->encodedData(mime);
-                    if (payload.size()) {
-                        int l;
-                        if (codec->mibEnum() != 1015) {
-                            // length is at NUL or payload.size()
-                            l = 0;
-                            while (l < (int)payload.size() && payload[l])
-                                l++;
-                        } else {
-                            l = payload.size();
-                        }
-
-                        str = codec->toUnicode(payload,l);
-
-                        if (subtype.isNull())
-                            subtype = foundst;
-
-                        return true;
-                    }
-                }
-            }
-        }
-    }
-    return false;
-}
-
-/*!
-    \fn bool TQTextDrag::decode(const QMimeSource *source, QString &string)
-
-    Attempts to decode the dropped information in the MIME \a source into
-    the \a string given.
-    Returns true if successful; otherwise returns false.
-
-    \sa canDecode()
-*/
-bool TQTextDrag::decode(const QMimeSource* e, QString& str)
-{
-    QString st;
-    return decode(e, str, st);
-}
-
-
-/*
-  TQImageDrag could use an internal MIME type for communicating QPixmaps
-  and TQImages rather than always converting to raw data. This is available
-  for that purpose and others. It is not currently used.
-*/
-
-/*!
-    \class TQImageDrag
-
-    \brief The TQImageDrag class provides a drag and drop object for
-    transferring images.
-
-    \compat
-
-    Images are offered to the receiving application in multiple
-    formats, determined by Qt's output formats.
-*/
-
-/*!
-    Constructs an image drag object with the given \a name, and sets its
-    data to \a image. The \a dragSource is the widget that the drag operation
-    started from.
-*/
-
-TQImageDrag::TQImageDrag(TQImage image,
-                        QWidget * dragSource, const char * name)
-    : TQDragObject(*(new TQImageDragPrivate), dragSource)
-{
-    setObjectName(QLatin1String(name));
-    setImage(image);
-}
-
-/*!
-    Constructs a default image drag object with the given \a name.
-    The \a dragSource is the widget that the drag operation started from.
-*/
-
-TQImageDrag::TQImageDrag(QWidget * dragSource, const char * name)
-    : TQDragObject(*(new TQImageDragPrivate), dragSource)
-{
-    setObjectName(QLatin1String(name));
-}
-
-/*! \internal */
-TQImageDrag::TQImageDrag(TQImageDragPrivate &dd, QWidget *dragSource)
-    : TQDragObject(dd, dragSource)
-{
-}
-
-/*!
-    Destroys the image drag object.
-*/
-
-TQImageDrag::~TQImageDrag()
-{
-    // nothing
-}
-
-
-/*!
-    Sets the \a image to be dragged. You will need to call this if you did
-    not pass the image during construction.
-*/
-void TQImageDrag::setImage(TQImage image)
-{
-    Q_D(TQImageDrag);
-    d->img = image;
-    QList<QByteArray> formats = QImageWriter::supportedImageFormats();
-    formats.removeAll("PBM"); // remove non-raw PPM
-    if (image.depth()!=32) {
-        // BMP better than PPM for paletted images
-        if (formats.removeAll("BMP")) // move to front
-            formats.insert(0,"BMP");
-    }
-    // PNG is best of all
-    if (formats.removeAll("PNG")) // move to front
-        formats.insert(0,"PNG");
-
-    for(int i = 0; i < formats.count(); i++) {
-        QByteArray format("image/");
-        format += formats.at(i);
-        format = format.toLower();
-        if (format == "image/pbmraw")
-            format = "image/ppm";
-        d->ofmts.append(format);
-    }
-    d->ofmts.append("application/x-qt-image");
-}
-
-/*!
-    \reimp
-*/
-const char * TQImageDrag::format(int i) const
-{
-    Q_D(const TQImageDrag);
-    return i < d->ofmts.count() ? d->ofmts.at(i).data() : 0;
-}
-
-/*!
-    \reimp
-*/
-QByteArray TQImageDrag::encodedData(const char* fmt) const
-{
-    Q_D(const TQImageDrag);
-    QString imgFormat(fmt);
-    if (imgFormat == QLatin1String("application/x-qt-image"))
-        imgFormat = QLatin1String("image/PNG");
-
-    if (imgFormat.startsWith("image/")){
-        QByteArray f(imgFormat.mid(6).toAscii());
-        QByteArray dat;
-        QBuffer w(&dat);
-        w.open(QIODevice::WriteOnly);
-        QImageWriter writer(&w, f.toUpper());
-        if (!writer.write(d->img))
-            return QByteArray();
-        w.close();
-        return dat;
-    } else {
-        return QByteArray();
-    }
-}
-
-/*!
-    \fn bool TQImageDrag::canDecode(const QMimeSource *source)
-
-    Returns true if the information in the MIME \a source can be decoded
-    into an image; otherwise returns false.
-
-    \sa decode()
-*/
-bool TQImageDrag::canDecode(const QMimeSource* e)
-{
-    return e->provides("application/x-qt-image");
-}
-
-/*!
-    \fn bool TQImageDrag::decode(const QMimeSource *source, QImage &image)
-
-    Decode the dropped information in the MIME \a source into the \a image.
-    Returns true if successful; otherwise returns false.
-
-    \sa canDecode()
-*/
-bool TQImageDrag::decode(const QMimeSource* e, QImage& img)
-{
-    if (!e)
-        return false;
-
-    QByteArray payload = e->encodedData("application/x-qt-image");
-    if (payload.isEmpty())
-        return false;
-
-    img.loadFromData(payload);
-    if (img.isNull())
-        return false;
-
-    return true;
-}
-
-/*!
-    \fn bool TQImageDrag::decode(const QMimeSource *source, QPixmap &pixmap)
-
-    \overload
-
-    Decodes the dropped information in the MIME \a source into the \a pixmap.
-    Returns true if successful; otherwise returns false.
-
-    This is a convenience function that converts the information to a QPixmap
-    via a QImage.
-
-    \sa canDecode()
-*/
-bool TQImageDrag::decode(const QMimeSource* e, QPixmap& pm)
-{
-    if (!e)
-        return false;
-
-    QImage img;
-    // We avoid dither, since the image probably came from this display
-    if (decode(e, img)) {
-        pm = QPixmap::fromImage(img, Qt::AvoidDither);
-        if (pm.isNull())
-            return false;
-
-        return true;
-    }
-    return false;
-}
-
-
-
-
-/*!
-    \class TQStoredDrag
-    \brief The TQStoredDrag class provides a simple stored-value drag object for arbitrary MIME data.
-
-    \compat
-
-    When a block of data has only one representation, you can use a
-    TQStoredDrag to hold it.
-
-    For more information about drag and drop, see the TQDragObject
-    class and the \link dnd.html drag and drop documentation\endlink.
-*/
-
-/*!
-    Constructs a TQStoredDrag. The \a dragSource and \a name are passed
-    to the TQDragObject constructor, and the format is set to \a
-    mimeType.
-
-    The data will be unset. Use setEncodedData() to set it.
-*/
-TQStoredDrag::TQStoredDrag(const char* mimeType, QWidget * dragSource, const char * name) :
-    TQDragObject(*new TQStoredDragPrivate, dragSource)
-{
-    Q_D(TQStoredDrag);
-    setObjectName(QLatin1String(name));
-    d->fmt = qstrdup(mimeType);
-}
-
-/*! \internal */
-TQStoredDrag::TQStoredDrag(TQStoredDragPrivate &dd, const char* mimeType, QWidget * dragSource)
-    : TQDragObject(dd, dragSource)
-{
-    d_func()->fmt = qstrdup(mimeType);
-}
-
-/*!
-    Destroys the drag object.
-*/
-TQStoredDrag::~TQStoredDrag()
-{
-    delete [] (char*)d_func()->fmt;
-}
-
-/*!
-    \reimp
-*/
-const char * TQStoredDrag::format(int i) const
-{
-    if (i==0)
-        return d_func()->fmt;
-    else
-        return 0;
-}
-
-
-/*!
-    \fn void TQStoredDrag::setEncodedData(const QByteArray &data)
-
-    Sets the encoded \a data of this drag object. The encoded data is
-    delivered to drop sites; it must be in a strictly defined and portable
-    format.
-
-    The drag object can't be dropped (by the user) until this function
-    has been called.
-*/
-
-void TQStoredDrag::setEncodedData(const QByteArray & encodedData)
-{
-    d_func()->enc = encodedData;
-}
-
-/*!
-    \fn QByteArray TQStoredDrag::encodedData(const char *format) const
-
-    Returns the stored data in the \a format given.
-
-    \sa setEncodedData()
-*/
-QByteArray TQStoredDrag::encodedData(const char* m) const
-{
-    if (!qstricmp(m, d_func()->fmt))
-        return d_func()->enc;
-    else
-        return QByteArray();
-}
-
-
-/*!
-    \class TQUriDrag
-    \brief The TQUriDrag class provides a drag object for a list of URI references.
-
-    \compat
-
-    URIs are a useful way to refer to files that may be distributed
-    across multiple machines. A URI will often refer to a file on a
-    machine local to both the drag source and the drop target, so the
-    URI can be equivalent to passing a file name but is more
-    extensible.
-
-    Use URIs in Unicode form so that the user can comfortably edit and
-    view them. For use in HTTP or other protocols, use the correctly
-    escaped ASCII form.
-
-    You can convert a list of file names to file URIs using
-    setFileNames(), or into human-readable form with setUnicodeUris().
-
-    Static functions are provided to convert between filenames and
-    URIs; e.g. uriToLocalFile() and localFileToUri(). Static functions
-    are also provided to convert URIs to and from human-readable form;
-    e.g. uriToUnicodeUri() and unicodeUriToUri().
-    You can also decode URIs from a MIME source into a list with
-    decodeLocalFiles() and decodeToUnicodeUris().
-*/
-
-/*!
-    Constructs an object to drag the list of \a uris.
-    The \a dragSource and \a name are passed to the TQStoredDrag constructor.
-
-    Note that URIs are always in escaped UTF8 encoding.
-*/
-TQUriDrag::TQUriDrag(const TQStrList &uris, QWidget * dragSource, const char * name) :
-    TQStoredDrag("text/uri-list", dragSource)
-{
-    setObjectName(QLatin1String(name));
-    setUris(uris);
-}
-
-/*!
-    Constructs an object to drag with the given \a name.
-    You must call setUris() before you start the drag().
-    Both the \a dragSource and the \a name are passed to the TQStoredDrag
-    constructor.
-*/
-TQUriDrag::TQUriDrag(QWidget * dragSource, const char * name) :
-    TQStoredDrag("text/uri-list", dragSource)
-{
-    setObjectName(QLatin1String(name));
-}
-#endif
-
-/*!
-    Destroys the URI drag object.
-*/
-TQUriDrag::~TQUriDrag()
-{
-}
-
-/*!
-    \fn void TQUriDrag::setUris(const QList<QByteArray> &list)
-
-    Changes the \a list of URIs to be dragged.
-
-    Note that URIs are always in escaped UTF8 encoding.
-*/
-void TQUriDrag::setUris(const QList<QByteArray> &uris)
-{
-    QByteArray a;
-    int c = 0;
-    int i;
-    int count = uris.count();
-    for (i = 0; i < count; ++i)
-        c += uris.at(i).size() + 2; //length + \r\n
-    a.reserve(c+1);
-    for (i = 0; i < count; ++i) {
-        a.append(uris.at(i));
-        a.append("\r\n");
-    }
-    a[c] = 0;
-    setEncodedData(a);
-}
-
-
-/*!
-    \fn bool TQUriDrag::canDecode(const QMimeSource *source)
-
-    Returns true if decode() can decode the MIME \a source; otherwise
-    returns false.
-*/
-bool TQUriDrag::canDecode(const QMimeSource* e)
-{
-    return e->provides("text/uri-list");
-}
-
-/*!
-    \fn bool TQUriDrag::decode(const QMimeSource* source, TQStrList& list)
-
-    Decodes URIs from the MIME \a source, placing the result in the \a list.
-    The list is cleared before any items are inserted.
-
-    Returns true if the MIME \a source contained a valid list of URIs;
-    otherwise returns false.
-*/
-bool TQUriDrag::decode(const QMimeSource* e, TQStrList& l)
-{
-    QByteArray payload = e->encodedData("text/uri-list");
-    if (payload.size()) {
-        l.clear();
-        l.setAutoDelete(true);
-        uint c=0;
-        const char* data = payload.data();
-        while ((int)c < payload.size() && data[c]) {
-            uint f = c;
-            // Find line end
-            while ((int)c < payload.size() && data[c] && data[c]!='\r'
-                   && data[c] != '\n')
-                c++;
-            TQCString s(data+f,c-f+1);
-            if (s[0] != '#') // non-comment?
-                l.append(s);
-            // Skip junk
-            while ((int)c < payload.size() && data[c] &&
-                   (data[c]=='\n' || data[c]=='\r'))
-                c++;
-        }
-        return true;
-    }
-    return false;
-}
-
-static uint htod(int h)
-{
-    if (isdigit(h))
-        return h - '0';
-    return tolower(h) - 'a' + 10;
-}
-
-/*!
-  \fn TQUriDrag::setFilenames(const QStringList &list)
-
-  \obsolete
-
-  Sets the filename's in the drag object to those in the given \a
-  list.
-
-  Use setFileNames() instead.
-*/
-
-/*!
-    \fn void TQUriDrag::setFileNames(const QStringList &filenames)
-
-    Sets the URIs to be local file URIs equivalent to the \a filenames.
-
-    \sa localFileToUri(), setUris()
-*/
-void TQUriDrag::setFileNames(const QStringList & fnames)
-{
-    QList<QByteArray> uris;
-    for (QStringList::ConstIterator i = fnames.begin();
-    i != fnames.end(); ++i) {
-        QByteArray fileUri = localFileToUri(*i);
-        if (!fileUri.isEmpty())
-            uris.append(fileUri);
-    }
-
-    setUris(uris);
-}
-
-/*!
-    \fn void TQUriDrag::setFileNames(const QString &name)
-    \fn void TQUriDrag::setFilenames(const QString &name)
-
-    Same as setFileNames(QStringList(\a name)).
-*/
-
-/*!
-    \fn void TQUriDrag::setUnicodeUris(const QStringList &list)
-
-    Sets the URIs in the \a list to be Unicode URIs (only useful for
-    displaying to humans).
-
-    \sa localFileToUri(), setUris()
-*/
-void TQUriDrag::setUnicodeUris(const QStringList & uuris)
-{
-    QList<QByteArray> uris;
-    for (int i = 0; i < uuris.count(); ++i)
-        uris.append(unicodeUriToUri(uuris.at(i)));
-    setUris(uris);
-}
-
-/*!
-    \fn QByteArray TQUriDrag::unicodeUriToUri(const QString &string)
-
-    Returns the URI equivalent of the Unicode URI given in the \a string
-    (only useful for displaying to humans).
-
-    \sa uriToLocalFile()
-*/
-QByteArray TQUriDrag::unicodeUriToUri(const QString& uuri)
-{
-    QByteArray utf8 = uuri.toUtf8();
-    QByteArray escutf8;
-    int n = utf8.length();
-    bool isFile = uuri.startsWith(QLatin1String("file://"));
-    for (int i=0; i<n; i++) {
-        if ((utf8[i] >= 'a' && utf8[i] <= 'z')
-          || utf8[i] == '/'
-          || (utf8[i] >= '0' && utf8[i] <= '9')
-          || (utf8[i] >= 'A' && utf8[i] <= 'Z')
-
-          || utf8[i] == '-' || utf8[i] == '_'
-          || utf8[i] == '.' || utf8[i] == '!'
-          || utf8[i] == '~' || utf8[i] == '*'
-          || utf8[i] == '(' || utf8[i] == ')'
-          || utf8[i] == '\''
-
-          // Allow this through, so that all URI-references work.
-          || (!isFile && utf8[i] == '#')
-
-          || utf8[i] == ';'
-          || utf8[i] == '?' || utf8[i] == ':'
-          || utf8[i] == '@' || utf8[i] == '&'
-          || utf8[i] == '=' || utf8[i] == '+'
-          || utf8[i] == '$' || utf8[i] == ',')
-        {
-            escutf8 += utf8[i];
-        } else {
-            // Everything else is escaped as %HH
-            QString s;
-            s.sprintf("%%%02x",(uchar)utf8[i]);
-            escutf8 += s.latin1();
-        }
-    }
-    return escutf8;
-}
-
-/*!
-    Returns the URI equivalent to the absolute local \a filename.
-
-    \sa uriToLocalFile()
-*/
-QByteArray TQUriDrag::localFileToUri(const QString& filename)
-{
-    QString r = filename;
-
-    //check that it is an absolute file
-    if (QDir::isRelativePath(r))
-        return QByteArray();
-#ifdef Q_WS_WIN
-
-
-    bool hasHost = false;
-    // convert form network path
-    if (r.left(2) == QLatin1String("\\\\") || r.left(2) == QLatin1String("//")) {
-        r.remove(0, 2);
-        hasHost = true;
-    }
-
-    // Slosh -> Slash
-    int slosh;
-    while ((slosh=r.indexOf(QLatin1Char('\\'))) >= 0) {
-        r[slosh] = QLatin1Char('/');
-    }
-
-    // Drive
-    if (r[0] != QLatin1Char('/') && !hasHost)
-        r.insert(0,QLatin1Char('/'));
-
-#endif
-#if defined (Q_WS_X11) && 0
-    // URL without the hostname is considered to be errorneous by XDnD.
-    // See: http://www.newplanetsoftware.com/xdnd/dragging_files.html
-    // This feature is not active because this would break dnd between old and new qt apps.
-    char hostname[257];
-    if (gethostname(hostname, 255) == 0) {
-        hostname[256] = '\0';
-        r.prepend(QString::fromLatin1(hostname));
-    }
-#endif
-    return unicodeUriToUri(QLatin1String("file://") + r);
-}
-
-/*!
-    \fn QString TQUriDrag::uriToUnicodeUri(const char *string)
-
-    Returns the Unicode URI (only useful for displaying to humans)
-    equivalent of the URI given in the \a string.
-
-    Note that URIs are always in escaped UTF8 encoding.
-
-    \sa localFileToUri()
-*/
-QString TQUriDrag::uriToUnicodeUri(const char* uri)
-{
-    QByteArray utf8;
-
-    while (*uri) {
-        switch (*uri) {
-          case '%': {
-                uint ch = (uchar) uri[1];
-                if (ch && uri[2]) {
-                    ch = htod(ch) * 16 + htod((uchar) uri[2]);
-                    utf8 += (char) ch;
-                    uri += 2;
-                }
-            }
-            break;
-          default:
-            utf8 += *uri;
-        }
-        ++uri;
-    }
-
-    return QString::fromUtf8(utf8);
-}
-
-/*!
-    \fn QString TQUriDrag::uriToLocalFile(const char *string)
-
-    Returns the name of a local file equivalent to the URI given in the
-    \a string, or an empty string if it does not refer to a local file.
-
-    Note that URIs are always in escaped UTF8 encoding.
-
-    \sa localFileToUri()
-*/
-QString TQUriDrag::uriToLocalFile(const char* uri)
-{
-    QString file;
-
-    if (!uri)
-        return file;
-    if (0==qstrnicmp(uri,"file:/",6)) // It is a local file uri
-        uri += 6;
-    else if (QString::fromLatin1(uri).indexOf(QLatin1String(":/")) != -1) // It is a different scheme uri
-        return file;
-
-    bool local = uri[0] != '/' || (uri[0] != '\0' && uri[1] == '/');
-#ifdef Q_WS_X11
-    // do we have a hostname?
-    if (!local && uri[0] == '/' && uri[2] != '/') {
-        // then move the pointer to after the 'hostname/' part of the uri
-        const char* hostname_end = strchr(uri+1, '/');
-        if (hostname_end != NULL) {
-            char hostname[257];
-            if (gethostname(hostname, 255) == 0) {
-                hostname[256] = '\0';
-                if (qstrncmp(uri+1, hostname, hostname_end - (uri+1)) == 0) {
-                    uri = hostname_end + 1; // point after the slash
-                    local = true;
-                }
-            }
-        }
-    }
-#endif
-    if (local) {
-        file = uriToUnicodeUri(uri);
-        if (uri[1] == '/') {
-            file.remove((uint)0,1);
-        } else {
-                file.insert(0, QLatin1Char('/'));
-        }
-#ifdef Q_WS_WIN
-        if (file.length() > 2 && file[0] == QLatin1Char('/') && file[2] == QLatin1Char('|')) {
-            file[2] = QLatin1Char(':');
-            file.remove(0,1);
-        } else if (file.length() > 2 && file[0] == QLatin1Char('/') && file[1].isLetter() && file[2] == QLatin1Char(':')) {
-            file.remove(0, 1);
-        }
-        // Leave slash as slashes.
-#endif
-    }
-#ifdef Q_WS_WIN
-    else {
-        file = uriToUnicodeUri(uri);
-        // convert to network path
-        file.insert(1, QLatin1Char('/')); // leave as forward slashes
-    }
-#endif
-
-    return file;
-}
-
-/*!
-    \fn bool TQUriDrag::decodeLocalFiles(const QMimeSource *source, QStringList &list)
-
-    Decodes URIs from the MIME \a source, converting them to local filenames
-    where possible, and places them in the \a list (which is first cleared).
-
-    Returns true if the MIME \a source contained a valid list of URIs;
-    otherwise returns false. The list will be empty if no URIs referred to
-    local files.
-*/
-bool TQUriDrag::decodeLocalFiles(const QMimeSource* e, QStringList& l)
-{
-    TQStrList u;
-    if (!decode(e, u))
-        return false;
-
-    l.clear();
-    for (uint i = 0; i < u.count(); ++i) {
-        QString lf = uriToLocalFile(u.at(i));
-        if (!lf.isEmpty())
-            l.append(lf);
-    }
-    return true;
-}
-
-/*!
-    \fn bool TQUriDrag::decodeToUnicodeUris(const QMimeSource *source, QStringList &list)
-
-    Decodes URIs from the MIME \a source, converting them to Unicode URIs
-    (only useful for displaying to humans), and places them in the \a list
-    (which is first cleared).
-
-    Returns true if the MIME \a source contained a valid list of URIs;
-    otherwise returns false.
-*/
-bool TQUriDrag::decodeToUnicodeUris(const QMimeSource* e, QStringList& l)
-{
-    TQStrList u;
-    if (!decode(e, u))
-        return false;
-
-    l.clear();
-    for (uint i = 0; i < u.count(); ++i)
-        l.append(uriToUnicodeUri(u.at(i)));
-
-    return true;
-}
-
-/*!
-    \class TQColorDrag
-
-    \brief The TQColorDrag class provides a drag and drop object for
-    transferring colors between widgets.
-
-    \compat
-
-    This class provides a drag object which can be used to transfer data
-    about colors for drag and drop and in the clipboard. For example, it
-    is used in QColorDialog.
-
-    The color is set in the constructor but can be changed with
-    setColor().
-
-    For more information about drag and drop, see the TQDragObject class
-    and the \link dnd.html drag and drop documentation\endlink.
-*/
-
-/*!
-    Constructs a color drag object with the given \a col. Passes \a
-    dragsource and \a name to the TQStoredDrag constructor.
-*/
-
-TQColorDrag::TQColorDrag(const QColor &col, QWidget *dragsource, const char *name)
-    : TQStoredDrag("application/x-color", dragsource)
-{
-    setObjectName(QLatin1String(name));
-    setColor(col);
-}
-
-/*!
-    Constructs a color drag object with a white color. Passes \a
-    dragsource and \a name to the TQStoredDrag constructor.
-*/
-
-TQColorDrag::TQColorDrag(QWidget *dragsource, const char *name)
-    : TQStoredDrag("application/x-color", dragsource)
-{
-    setObjectName(QLatin1String(name));
-    setColor(Qt::white);
-}
-
-/*!
-    \fn void TQColorDrag::setColor(const QColor &color)
-
-    Sets the \a color of the color drag.
-*/
-
-void TQColorDrag::setColor(const QColor &col)
-{
-    short r = (col.red()   << 8) | col.red();
-    short g = (col.green() << 8) | col.green();
-    short b = (col.blue()  << 8) | col.blue();
-
-    // make sure we transmit data in network order
-    r = htons(r);
-    g = htons(g);
-    b = htons(b);
-
-    ushort rgba[4] = {
-        r, g, b,
-        0xffff // Alpha not supported yet.
-    };
-    QByteArray data;
-    data.resize(sizeof(rgba));
-    memcpy(data.data(), rgba, sizeof(rgba));
-    setEncodedData(data);
-}
-
-/*!
-    \fn bool TQColorDrag::canDecode(QMimeSource *source)
-
-    Returns true if the color drag object can decode the MIME \a source;
-    otherwise returns false.
-*/
-
-bool TQColorDrag::canDecode(QMimeSource *e)
-{
-    return e->provides("application/x-color");
-}
-
-/*!
-    \fn bool TQColorDrag::decode(QMimeSource *source, QColor &color)
-
-    Decodes the MIME \a source, and sets the decoded values to the
-    given \a color. Returns true if the decoding is successful.
-    Returns false if the size of the encoded data is not the
-    expected size.
-*/
-
-bool TQColorDrag::decode(QMimeSource *e, QColor &col)
-{
-    QByteArray data = e->encodedData("application/x-color");
-    ushort rgba[4];
-    if (data.size() != sizeof(rgba))
-        return false;
-
-    memcpy(rgba, data.constData(), sizeof(rgba));
-
-    short r = rgba[0];
-    short g = rgba[1];
-    short b = rgba[2];
-    short a = rgba[3];
-
-    // data is in network order
-    r = ntohs(r);
-    g = ntohs(g);
-    b = ntohs(b);
-    a = ntohs(a);
-
-    r = (r >> 8) & 0xff;
-    g = (g >> 8) & 0xff;
-    b = (b >> 8) & 0xff;
-    a = (a >> 8) & 0xff;
-
-    col.setRgb(r, g, b, a);
-    return true;
-}
-
-QT_END_NAMESPACE
-
-#else // USE_QT4
-
-/****************************************************************************
-**
-** Implementation of Drag and Drop support
-**
-** Copyright (C) 2010 Timothy Pearson and (C) 1992-2008 Trolltech ASA.
-**
-** This file is part of the kernel module of the TQt GUI Toolkit.
-**
-** This file may be used under the terms of the GNU General
-** Public License versions 2.0 or 3.0 as published by the Free
-** Software Foundation and appearing in the files LICENSE.GPL2
-** and LICENSE.GPL3 included in the packaging of this file.
-** Alternatively you may (at your option) use any later version
-** of the GNU General Public License if such license has been
-** publicly approved by Trolltech ASA (or its successors, if any)
-** and the KDE Free TQt Foundation.
-**
-** Please review the following information to ensure GNU General
-** Public Licensing requirements will be met:
-** http://trolltech.com/products/qt/licenses/licensing/opensource/.
-** If you are unsure which license is appropriate for your use, please
-** review the following information:
-** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
-** or contact the sales department at sales@trolltech.com.
-**
-** This file may be used under the terms of the Q Public License as
-** defined by Trolltech ASA and appearing in the file LICENSE.TQPL
-** included in the packaging of this file.  Licensees holding valid TQt
-** Commercial licenses may use this file in accordance with the TQt
-** Commercial License Agreement provided with the Software.
-**
-** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
-** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
-** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
-** herein.
-**
-**********************************************************************/
-
-#include "tqplatformdefs.h"
-
-// POSIX Large File Support redefines open -> open64
-#if defined(open)
-# undef open
-#endif
-
-#ifndef TQT_NO_MIME
-
-#include "tqdragobject.h"
-#include "tqtextcodec.h"
-#include "tqapplication.h"
-#include "tqpoint.h"
-#include "tqwidget.h"
-#include "tqbuffer.h"
-#include "tqgif.h"
-#include "tqregexp.h"
-#include "tqdir.h"
-#include <ctype.h>
-
-// both a struct for storing stuff in and a wrapper to avoid polluting
-// the name space
-
-class TQDragObjectData
-{
-public:
-    TQDragObjectData(): hot(0,0) {}
-    TQPixmap pixmap;
-    TQPoint hot;
-    // store default cursors
-    TQPixmap *pm_cursor;
-};
-
-static TQWidget* last_target;
-
-/*!
-    After the drag completes, this function will return the TQWidget
-    which received the drop, or 0 if the data was dropped on another
-    application.
-
-    This can be useful for detecting the case where drag and drop is
-    to and from the same widget.
-*/
-TQWidget * TQDragObject::target()
-{
-    return last_target;
-}
-
-/*!
-    \internal
-    Sets the target.
-*/
-void TQDragObject::setTarget(QWidget* t)
-{
-    last_target = TQT_TQWIDGET(t);
-}
-
-class TQStoredDragData
-{
-public:
-    TQStoredDragData() {}
-    const char* fmt;
-    TQByteArray enc;
-};
-
-
-// These pixmaps approximate the images in the Windows User Interface Guidelines.
-
-// XPM
-
-static const char * const move_xpm[] = {
-"11 20 3 1",
-".	c None",
-#if defined(TQ_WS_WIN)
-"a	c #000000",
-"X	c #FFFFFF", // Windows cursor is traditionally white
-#else
-"a	c #FFFFFF",
-"X	c #000000", // X11 cursor is traditionally black
-#endif
-"aa.........",
-"aXa........",
-"aXXa.......",
-"aXXXa......",
-"aXXXXa.....",
-"aXXXXXa....",
-"aXXXXXXa...",
-"aXXXXXXXa..",
-"aXXXXXXXXa.",
-"aXXXXXXXXXa",
-"aXXXXXXaaaa",
-"aXXXaXXa...",
-"aXXaaXXa...",
-"aXa..aXXa..",
-"aa...aXXa..",
-"a.....aXXa.",
-"......aXXa.",
-".......aXXa",
-".......aXXa",
-"........aa."};
-
-/* XPM */
-static const char * const copy_xpm[] = {
-"24 30 3 1",
-".	c None",
-"a	c #000000",
-"X	c #FFFFFF",
-#if defined(TQ_WS_WIN) // Windows cursor is traditionally white
-"aa......................",
-"aXa.....................",
-"aXXa....................",
-"aXXXa...................",
-"aXXXXa..................",
-"aXXXXXa.................",
-"aXXXXXXa................",
-"aXXXXXXXa...............",
-"aXXXXXXXXa..............",
-"aXXXXXXXXXa.............",
-"aXXXXXXaaaa.............",
-"aXXXaXXa................",
-"aXXaaXXa................",
-"aXa..aXXa...............",
-"aa...aXXa...............",
-"a.....aXXa..............",
-"......aXXa..............",
-".......aXXa.............",
-".......aXXa.............",
-"........aa...aaaaaaaaaaa",
-#else
-"XX......................",
-"XaX.....................",
-"XaaX....................",
-"XaaaX...................",
-"XaaaaX..................",
-"XaaaaaX.................",
-"XaaaaaaX................",
-"XaaaaaaaX...............",
-"XaaaaaaaaX..............",
-"XaaaaaaaaaX.............",
-"XaaaaaaXXXX.............",
-"XaaaXaaX................",
-"XaaXXaaX................",
-"XaX..XaaX...............",
-"XX...XaaX...............",
-"X.....XaaX..............",
-"......XaaX..............",
-".......XaaX.............",
-".......XaaX.............",
-"........XX...aaaaaaaaaaa",
-#endif
-".............aXXXXXXXXXa",
-".............aXXXXXXXXXa",
-".............aXXXXaXXXXa",
-".............aXXXXaXXXXa",
-".............aXXaaaaaXXa",
-".............aXXXXaXXXXa",
-".............aXXXXaXXXXa",
-".............aXXXXXXXXXa",
-".............aXXXXXXXXXa",
-".............aaaaaaaaaaa"};
-
-/* XPM */
-static const char * const link_xpm[] = {
-"24 30 3 1",
-".	c None",
-"a	c #000000",
-"X	c #FFFFFF",
-#if defined(TQ_WS_WIN) // Windows cursor is traditionally white
-"aa......................",
-"aXa.....................",
-"aXXa....................",
-"aXXXa...................",
-"aXXXXa..................",
-"aXXXXXa.................",
-"aXXXXXXa................",
-"aXXXXXXXa...............",
-"aXXXXXXXXa..............",
-"aXXXXXXXXXa.............",
-"aXXXXXXaaaa.............",
-"aXXXaXXa................",
-"aXXaaXXa................",
-"aXa..aXXa...............",
-"aa...aXXa...............",
-"a.....aXXa..............",
-"......aXXa..............",
-".......aXXa.............",
-".......aXXa.............",
-"........aa...aaaaaaaaaaa",
-#else
-"XX......................",
-"XaX.....................",
-"XaaX....................",
-"XaaaX...................",
-"XaaaaX..................",
-"XaaaaaX.................",
-"XaaaaaaX................",
-"XaaaaaaaX...............",
-"XaaaaaaaaX..............",
-"XaaaaaaaaaX.............",
-"XaaaaaaXXXX.............",
-"XaaaXaaX................",
-"XaaXXaaX................",
-"XaX..XaaX...............",
-"XX...XaaX...............",
-"X.....XaaX..............",
-"......XaaX..............",
-".......XaaX.............",
-".......XaaX.............",
-"........XX...aaaaaaaaaaa",
-#endif
-".............aXXXXXXXXXa",
-".............aXXXaaaaXXa",
-".............aXXXXaaaXXa",
-".............aXXXaaaaXXa",
-".............aXXaaaXaXXa",
-".............aXXaaXXXXXa",
-".............aXXaXXXXXXa",
-".............aXXXaXXXXXa",
-".............aXXXXXXXXXa",
-".............aaaaaaaaaaa"};
-
-#ifndef TQT_NO_DRAGANDDROP
-
-// the universe's only drag manager
-TQDragManager * qt_dnd_manager = 0;
-
-
-TQDragManager::TQDragManager()
-    : TQObject( TQT_TQOBJECT(tqApp), "global drag manager" )
-{
-    n_cursor = 3;
-    pm_cursor = new TQPixmap[n_cursor];
-    pm_cursor[0] = TQPixmap((const char **)move_xpm);
-    pm_cursor[1] = TQPixmap((const char **)copy_xpm);
-    pm_cursor[2] = TQPixmap((const char **)link_xpm);
-#if defined(TQ_WS_X11)
-    createCursors(); // Xcursors cache can hold only 8 bitmaps (4 cursors)
-#endif
-    object = 0;
-    dragSource = 0;
-    dropWidget = 0;
-    if ( !qt_dnd_manager )
-	qt_dnd_manager = this;
-    beingCancelled = FALSE;
-    restoreCursor = FALSE;
-    willDrop = FALSE;
-}
-
-
-TQDragManager::~TQDragManager()
-{
-#ifndef TQT_NO_CURSOR
-    if ( restoreCursor )
-	TQApplication::restoreOverrideCursor();
-#endif
-    qt_dnd_manager = 0;
-    delete [] pm_cursor;
-}
-
-#endif
-
-
-/*!
-    Constructs a drag object called \a name, which is a child of \a
-    dragSource.
-
-    Note that the drag object will be deleted when \a dragSource is
-    deleted.
-*/
-
-TQDragObject::TQDragObject( QWidget * dragSource, const char * name )
-    : TQObject( TQT_TQOBJECT(dragSource), name )
-{
-    d = new TQDragObjectData();
-    d->pm_cursor = 0;
-#ifndef TQT_NO_DRAGANDDROP
-    if ( !qt_dnd_manager && tqApp )
-	(void)new TQDragManager();
-#endif
-}
-
-
-/*!
-    Destroys the drag object, canceling any drag and drop operation in
-    which it is involved, and frees up the storage used.
-*/
-
-TQDragObject::~TQDragObject()
-{
-#ifndef TQT_NO_DRAGANDDROP
-    if ( qt_dnd_manager && qt_dnd_manager->object == this )
-	qt_dnd_manager->cancel( FALSE );
-    if ( d->pm_cursor ) {
-	for ( int i = 0; i < qt_dnd_manager->n_cursor; i++ )
-	    qt_dnd_manager->pm_cursor[i] = d->pm_cursor[i];
-	delete [] d->pm_cursor;
-    }
-#endif
-    delete d;
-}
-
-#ifndef TQT_NO_DRAGANDDROP
-/*!
-    Set the pixmap \a pm to display while dragging the object. The
-    platform-specific implementation will use this where it can - so
-    provide a small masked pixmap, and do not assume that the user
-    will actually see it. For example, cursors on Windows 95 are of
-    limited size.
-
-    The \a hotspot is the point on (or off) the pixmap that should be
-    under the cursor as it is dragged. It is relative to the top-left
-    pixel of the pixmap.
-
-    \warning We have seen problems with drag cursors on different
-    graphics hardware and driver software on Windows. Setting the
-    graphics acceleration in the display settings down one tick solved
-    the problems in all cases.
-*/
-void TQDragObject::setPixmap(QPixmap pm, const QPoint& hotspot)
-{
-    d->pixmap = pm;
-    d->hot = hotspot;
-    if ( qt_dnd_manager && qt_dnd_manager->object == this )
-	qt_dnd_manager->updatePixmap();
-}
-
-/*!
-    \overload
-    Uses a hotspot that positions the pixmap below and to the right of
-    the mouse pointer. This allows the user to clearly see the point
-    on the window which they are dragging the data onto.
-*/
-void TQDragObject::setPixmap(QPixmap pm)
-{
-    setPixmap(pm,TQPoint(-10, -10));
-}
-
-/*!
-    Returns the currently set pixmap (which \link TQPixmap::isNull()
-    isNull()\endlink if none is set).
-*/
-TQPixmap TQDragObject::pixmap() const
-{
-    return d->pixmap;
-}
-
-/*!
-    Returns the currently set pixmap hotspot.
-*/
-TQPoint TQDragObject::pixmapHotSpot() const
-{
-    return d->hot;
-}
-
-#if 0
-
-// ## reevaluate for TQt 4
-/*!
-    Set the \a cursor used when dragging in mode \a m.
-    Note: X11 only allow bitmaps for cursors.
-*/
-void TQDragObject::setCursor( DragMode m, const TQPixmap &cursor )
-{
-    if ( d->pm_cursor == 0 ) {
-	// safe default cursors
-	d->pm_cursor = new TQPixmap[qt_dnd_manager->n_cursor];
-	for ( int i = 0; i < qt_dnd_manager->n_cursor; i++ )
-	    d->pm_cursor[i] = qt_dnd_manager->pm_cursor[i];
-    }
-
-    int index;
-    switch ( m ) {
-    case DragCopy:
-	index = 1;
-	break;
-    case DragLink:
-	index = 2;
-	break;
-    default:
-	index = 0;
-	break;
-    }
-
-    // override default cursor
-    for ( index = 0; index < qt_dnd_manager->n_cursor; index++ )
-	qt_dnd_manager->pm_cursor[index] = cursor;
-}
-
-/*!
-    Returns the cursor used when dragging in mode \a m, or null if no cursor
-    has been set for that mode.
-*/
-TQPixmap *TQDragObject::cursor( DragMode m ) const
-{
-    if ( !d->pm_cursor )
-	return 0;
-
-    int index;
-    switch ( m ) {
-    case DragCopy:
-	index = 1;
-	break;
-    case DragLink:
-	index = 2;
-	break;
-    default:
-	index = 0;
-	break;
-    }
-
-    return qt_dnd_manager->pm_cursor+index;
-}
-
-#endif // 0
-
-/*!
-    Starts a drag operation using the contents of this object, using
-    DragDefault mode.
-
-    The function returns TRUE if the caller should delete the original
-    copy of the dragged data (but see target()); otherwise returns
-    FALSE.
-
-    If the drag contains \e references to information (e.g. file names
-    in a TQUriDrag are references) then the return value should always
-    be ignored, as the target is expected to manipulate the
-    referred-to content directly. On X11 the return value should
-    always be correct anyway, but on Windows this is not necessarily
-    the case (e.g. the file manager starts a background process to
-    move files, so the source \e{must not} delete the files!)
-*/
-bool TQDragObject::drag()
-{
-    return drag( DragDefault );
-}
-
-
-/*!
-    Starts a drag operation using the contents of this object, using
-    \c DragMove mode. Be sure to read the constraints described in
-    drag().
-
-    \sa drag() dragCopy() dragLink()
-*/
-bool TQDragObject::dragMove()
-{
-    return drag( DragMove );
-}
-
-
-/*!
-    Starts a drag operation using the contents of this object, using
-    \c DragCopy mode. Be sure to read the constraints described in
-    drag().
-
-    \sa drag() dragMove() dragLink()
-*/
-void TQDragObject::dragCopy()
-{
-    (void)drag( DragCopy );
-}
-
-/*!
-    Starts a drag operation using the contents of this object, using
-    \c DragLink mode. Be sure to read the constraints described in
-    drag().
-
-    \sa drag() dragCopy() dragMove()
-*/
-void TQDragObject::dragLink()
-{
-    (void)drag( DragLink );
-}
-
-
-/*!
-    \enum TQDragObject::DragMode
-
-    This enum describes the possible drag modes.
-
-    \value DragDefault  The mode is determined heuristically.
-    \value DragCopy  The data is copied, never moved.
-    \value DragMove  The data is moved, if dragged at all.
-    \value DragLink  The data is linked, if dragged at all.
-    \value DragCopyOrMove  The user chooses the mode by using a
-			   control key to switch from the default.
-*/
-
-
-/*!
-    \overload
-    Starts a drag operation using the contents of this object.
-
-    At this point, the object becomes owned by TQt, not the
-    application. You should not delete the drag object or anything it
-    references. The actual transfer of data to the target application
-    will be done during future event processing - after that time the
-    drag object will be deleted.
-
-    Returns TRUE if the dragged data was dragged as a \e move,
-    indicating that the caller should remove the original source of
-    the data (the drag object must continue to have a copy); otherwise
-    returns FALSE.
-
-    The \a mode specifies the drag mode (see
-    \l{TQDragObject::DragMode}.) Normally one of the simpler drag(),
-    dragMove(), or dragCopy() functions would be used instead.
-*/
-bool TQDragObject::drag( DragMode mode )
-{
-    if ( qt_dnd_manager )
-	return qt_dnd_manager->drag( this, mode );
-    else
-	return FALSE;
-}
-
-#endif
-
-
-/*!
-    Returns a pointer to the drag source where this object originated.
-*/
-
-TQWidget * TQDragObject::source()
-{
-    if ( parent() && parent()->isWidgetType() )
-	return (TQWidget *)parent();
-    else
-	return 0;
-}
-
-
-/*!
-    \class TQDragObject tqdragobject.h
-
-    \brief The TQDragObject class encapsulates MIME-based data
-    transfer.
-
-    \ingroup draganddrop
-
-    TQDragObject is the base class for all data that needs to be
-    transferred between and within applications, both for drag and
-    drop and for the \link tqclipboard.html clipboard\endlink.
-
-    See the \link dnd.html Drag-and-drop documentation\endlink for an
-    overview of how to provide drag and drop in your application.
-
-    See the TQClipboard documentation for an overview of how to provide
-    cut-and-paste in your application.
-
-    The drag() function is used to start a drag operation. You can
-    specify the \l DragMode in the call or use one of the convenience
-    functions dragCopy(), dragMove() or dragLink(). The drag source
-    where the data originated is retrieved with source(). If the data
-    was dropped on a widget within the application, target() will
-    return a pointer to that widget. Specify the pixmap to display
-    during the drag with setPixmap().
-*/
-
-static
-void stripws(TQCString& s)
-{
-    int f;
-    while ( (f=s.find(' ')) >= 0 )
-	s.remove(f,1);
-}
-
-static
-const char * staticCharset(int i)
-{
-    static TQCString localcharset;
-
-    switch ( i ) {
-      case 0:
-	return "UTF-8";
-      case 1:
-	return "ISO-10646-UCS-2";
-      case 2:
-	return ""; // in the 3rd place - some Xdnd targets might only look at 3
-      case 3:
-	if ( localcharset.isNull() ) {
-	    TQTextCodec *localCodec = TQTextCodec::codecForLocale();
-	    if ( localCodec ) {
-		localcharset = localCodec->name();
-		localcharset = localcharset.lower();
-		stripws(localcharset);
-	    } else {
-		localcharset = "";
-	    }
-	}
-	return localcharset;
-    }
-    return 0;
-}
-
-
-class TQTextDragPrivate {
-public:
-    TQTextDragPrivate();
-
-    enum { nfmt=4 };
-
-    TQString txt;
-    TQCString fmt[nfmt];
-    TQCString subtype;
-
-    void setSubType(const TQCString & st)
-    {
-	subtype = st.lower();
-	for ( int i=0; i<nfmt; i++ ) {
-	    fmt[i] = "text/";
-	    fmt[i].append(subtype);
-	    TQCString cs = staticCharset(i);
-	    if ( !cs.isEmpty() ) {
-		fmt[i].append(";charset=");
-		fmt[i].append(cs);
-	    }
-	}
-    }
-};
-
-inline TQTextDragPrivate::TQTextDragPrivate()
-{
-    setSubType("plain");
-}
-
-/*!
-    Sets the MIME subtype of the text being dragged to \a st. The
-    default subtype is "plain", so the default MIME type of the text
-    is "text/plain". You might use this to declare that the text is
-    "text/html" by calling setSubtype("html").
-*/
-void TQTextDrag::setSubtype( const TQCString & st)
-{
-    d->setSubType(st);
-}
-
-/*!
-    \class TQTextDrag tqdragobject.h
-
-    \brief The TQTextDrag class is a drag and drop object for
-    transferring plain and Unicode text.
-
-    \ingroup draganddrop
-
-    Plain text is passed in a TQString which may contain multiple lines
-    (i.e. may contain newline characters). The drag target will receive
-    the newlines according to the runtime environment, e.g. LF on Unix,
-    and CRLF on Windows.
-
-    TQt provides no built-in mechanism for delivering only a single-line.
-
-    For more information about drag and drop, see the TQDragObject class
-    and the \link dnd.html drag and drop documentation\endlink.
-*/
-
-
-/*!
-    Constructs a text drag object and sets its data to \a text. \a
-    dragSource must be the drag source; \a name is the object name.
-*/
-
-TQTextDrag::TQTextDrag( const TQString &text,
-		      TQWidget * dragSource, const char * name )
-    : TQDragObject( dragSource, name )
-{
-    d = new TQTextDragPrivate;
-    setText( text );
-}
-
-
-/*!
-    Constructs a default text drag object. \a dragSource must be the
-    drag source; \a name is the object name.
-*/
-
-TQTextDrag::TQTextDrag( TQWidget * dragSource, const char * name )
-    : TQDragObject( dragSource, name )
-{
-    d = new TQTextDragPrivate;
-}
-
-
-/*!
-    Destroys the text drag object and frees up all allocated
-    resources.
-*/
-TQTextDrag::~TQTextDrag()
-{
-    delete d;
-}
-
-
-/*!
-    Sets the text to be dragged to \a text. You will need to call this
-    if you did not pass the text during construction.
-*/
-void TQTextDrag::setText( const TQString &text )
-{
-    d->txt = text;
-}
-
-
-/*!
-    \reimp
-*/
-const char * TQTextDrag::format(int i) const
-{
-    if ( i >= d->nfmt )
-	return 0;
-    return d->fmt[i];
-}
-
-TQTextCodec* qt_findcharset(const TQCString& mimetype)
-{
-    int i=mimetype.find("charset=");
-    if ( i >= 0 ) {
-	TQCString cs = mimetype.mid(i+8);
-	stripws(cs);
-	i = cs.find(';');
-	if ( i >= 0 )
-	    cs = cs.left(i);
-	// win98 often has charset=utf16, and we need to get the correct codec for
-	// it to be able to get Unicode text drops.
-	if ( cs == "utf16" )
-	    cs = "ISO-10646-UCS-2";
-	// May return 0 if unknown charset
-	return TQTextCodec::codecForName(cs);
-    }
-    // no charset=, use locale
-    return TQTextCodec::codecForLocale();
-}
-
-static TQTextCodec *codecForHTML(const TQCString &ba)
-{
-    // determine charset
-    int mib = 0;
-    int pos;
-    TQTextCodec *c = 0;
-
-    if (ba.size() > 1 && (((uchar)ba[0] == 0xfe && (uchar)ba[1] == 0xff)
-			  || ((uchar)ba[0] == 0xff && (uchar)ba[1] == 0xfe))) {
-	mib = 1000; // utf16
-    } else if (ba.size() > 2
-	       && (uchar)ba[0] == 0xef
-	       && (uchar)ba[1] == 0xbb
-	       && (uchar)ba[2] == 0xbf) {
-	mib = 106; // utf-8
-    } else {
-	pos = 0;
-	while ((pos = ba.find("<meta http-equiv=", pos, FALSE)) != -1) {
-	    int end = ba.find('>', pos+1);
-	    if (end == -1)
-		break;
-	    pos = ba.find("charset=", pos, FALSE) + (int)strlen("charset=");
-	    if (pos != -1 && pos < end) {
-		int pos2 = ba.find('\"', pos+1);
-		TQCString cs = ba.mid(pos, pos2-pos);
-		c = TQTextCodec::codecForName(cs);
-		if (c)
-		    return c;
-	    }
-	    pos = end;
-	}
-    }
-    if (mib)
-	c = TQTextCodec::codecForMib(mib);
-
-    return c;
-}
-
-static
-TQTextCodec* findcodec(const TQMimeSource* e)
-{
-    TQTextCodec* r = 0;
-    const char* f;
-    int i;
-    for ( i=0; (f=e->format(i)); i++ ) {
-	bool html = !qstrnicmp(f, "text/html", 9);
-	if (html)
-	    r = codecForHTML(TQCString(e->tqencodedData(f)));
-	if (!r)
-	    r = qt_findcharset(TQCString(f).lower());
-	if (r)
-	    return r;
-    }
-    return 0;
-}
-
-
-
-/*!
-    \reimp
-*/
-TQByteArray TQTextDrag::tqencodedData(const char* mime) const
-{
-    TQCString r;
-    if ( 0==qstrnicmp(mime,"text/",5) ) {
-	TQCString m(mime);
-	m = m.lower();
-	TQTextCodec *codec = qt_findcharset(m);
-	if ( !codec )
-	    return r;
-	TQString text( d->txt );
-#if defined(TQ_WS_WIN)
-	int index = text.find( TQString::tqfromLatin1("\r\n"), 0 );
-	while ( index != -1 ) {
-	    text.replace( index, 2, TQChar('\n') );
-	    index = text.find( "\r\n", index );
-	}
-#endif
-	r = codec->fromUnicode(text);
-	if (!codec || codec->mibEnum() != 1000) {
-	    // Don't include NUL in size (TQCString::resize() adds NUL)
-#if defined(TQ_WS_WIN)
-	    // This is needed to ensure the \0 isn't lost on Windows 95
-	    if ( qWinVersion() & TQt::WV_DOS_based )
-		((TQByteArray&)r).resize(r.length()+1);
-	    else
-#endif
-		((TQByteArray&)r).resize(r.length());
-	}
-    }
-    return r;
-}
-
-/*!
-    Returns TRUE if the information in \a e can be decoded into a
-    TQString; otherwise returns FALSE.
-
-    \sa decode()
-*/
-bool TQTextDrag::canDecode( const TQMimeSource* e )
-{
-    const char* f;
-    for (int i=0; (f=e->format(i)); i++) {
-	if ( 0==qstrnicmp(f,"text/",5) ) {
-	    return findcodec(e) != 0;
-	}
-    }
-    return 0;
-}
-
-/*!
-    \overload
-
-    Attempts to decode the dropped information in \a e into \a str.
-    Returns TRUE if successful; otherwise returns FALSE. If \a subtype
-    is null, any text subtype is accepted; otherwise only the
-    specified \a subtype is accepted.
-
-    \sa canDecode()
-*/
-bool TQTextDrag::decode( const TQMimeSource* e, TQString& str, TQCString& subtype )
-{
-    if(!e)
-	return FALSE;
-        
-    // when subtype is not specified, try text/plain first, otherwise this may read
-    // things like text/x-moz-url even though better targets are available
-    if( subtype.isNull()) {
-        TQCString subtmp = "plain";
-        if( decode( e, str, subtmp )) {
-            subtype = subtmp;
-            return true;
-        }
-    }
-
-    if ( e->cacheType == TQMimeSource::Text ) {
-	str = *e->cache.txt.str;
-	subtype = *e->cache.txt.subtype;
-	return TRUE;
-    }
-
-    const char* mime;
-    for (int i=0; (mime = e->format(i)); i++) {
-	if ( 0==qstrnicmp(mime,"text/",5) ) {
-	    TQCString m(mime);
-	    m = m.lower();
-	    int semi = m.find(';');
-	    if ( semi < 0 )
-		semi = m.length();
-	    TQCString foundst = m.mid(5,semi-5);
-	    if ( subtype.isNull() || foundst == subtype ) {
-		bool html = !qstrnicmp(mime, "text/html", 9);
-		TQTextCodec* codec = 0;
-                if (html) {
-                    TQByteArray bytes = e->tqencodedData(mime);
-		    // search for the charset tag in the HTML
-		    codec = codecForHTML(TQCString(bytes.data(), bytes.size()));
-                }
-		if (!codec)
-		    codec = qt_findcharset(m);
-		if ( codec ) {
-		    TQByteArray payload;
-
-		    payload = e->tqencodedData(mime);
-		    if ( payload.size() ) {
-			int l;
-			if ( codec->mibEnum() != 1000) {
-			    // length is at NUL or payload.size()
-			    l = 0;
-			    while ( l < (int)payload.size() && payload[l] )
-				l++;
-			} else {
-			    l = payload.size();
-			}
-
-			str = codec->toUnicode(payload,l);
-
-			if ( subtype.isNull() )
-			    subtype = foundst;
-
-			TQMimeSource *m = (TQMimeSource*)e;
-			m->clearCache();
-			m->cacheType = TQMimeSource::Text;
-			m->cache.txt.str = new TQString( str );
-			m->cache.txt.subtype = new TQCString( subtype );
-
-			return TRUE;
-		    }
-		}
-	    }
-	}
-    }
-    return FALSE;
-}
-
-/*!
-    Attempts to decode the dropped information in \a e into \a str.
-    Returns TRUE if successful; otherwise returns FALSE.
-
-    \sa canDecode()
-*/
-bool TQTextDrag::decode( const TQMimeSource* e, TQString& str )
-{
-    TQCString st;
-    return decode(e,str,st);
-}
-
-
-/*
-  TQImageDrag could use an internal MIME type for communicating TQPixmaps
-  and TQImages rather than always converting to raw data. This is available
-  for that purpose and others. It is not currently used.
-*/
-class TQImageDragData
-{
-public:
-};
-
-
-/*!
-    \class TQImageDrag tqdragobject.h
-
-    \brief The TQImageDrag class provides a drag and drop object for
-    transferring images.
-
-    \ingroup draganddrop
-
-    Images are offered to the receiving application in multiple
-    formats, determined by TQt's \link TQImage::outputFormats() output
-    formats\endlink.
-
-    For more information about drag and drop, see the TQDragObject
-    class and the \link dnd.html drag and drop documentation\endlink.
-*/
-
-/*!
-    Constructs an image drag object and sets its data to \a image. \a
-    dragSource must be the drag source; \a name is the object name.
-*/
-
-TQImageDrag::TQImageDrag( QImage image,
-			QWidget * dragSource, const char * name )
-    : TQDragObject( dragSource, name ),
-	d(0)
-{
-    setImage( image );
-}
-
-/*!
-    Constructs a default image drag object. \a dragSource must be the
-    drag source; \a name is the object name.
-*/
-
-TQImageDrag::TQImageDrag( QWidget * dragSource, const char * name )
-    : TQDragObject( dragSource, name ),
-	d(0)
-{
-}
-
-
-/*!
-    Destroys the image drag object and frees up all allocated
-    resources.
-*/
-
-TQImageDrag::~TQImageDrag()
-{
-    // nothing
-}
-
-
-/*!
-    Sets the image to be dragged to \a image. You will need to call
-    this if you did not pass the image during construction.
-*/
-void TQImageDrag::setImage( QImage image )
-{
-    img = image; // ### detach?
-    ofmts = TQImage::outputFormats();
-    ofmts.remove("PBM"); // remove non-raw PPM
-    if ( image.depth()!=32 ) {
-	// BMP better than PPM for paletted images
-	if ( ofmts.remove("BMP") ) // move to front
-	    ofmts.insert(0,"BMP");
-    }
-    // PNG is best of all
-    if ( ofmts.remove("PNG") ) // move to front
-	ofmts.insert(0,"PNG");
-
-    if(cacheType == TQMimeSource::NoCache) { //cache it
-	cacheType = TQMimeSource::Graphics;
-	cache.gfx.img = new TQImage( img );
-	cache.gfx.pix = 0;
-    }
-}
-
-/*!
-    \reimp
-*/
-const char * TQImageDrag::format(int i) const
-{
-    if ( i < (int)ofmts.count() ) {
-	static TQCString str;
-	str.sprintf("image/%s",(((TQImageDrag*)this)->ofmts).at(i));
-	str = str.lower();
-	if ( str == "image/pbmraw" )
-	    str = "image/ppm";
-	return str;
-    } else {
-	return 0;
-    }
-}
-
-/*!
-    \reimp
-*/
-TQByteArray TQImageDrag::tqencodedData(const char* fmt) const
-{
-    if ( qstrnicmp( fmt, "image/", 6 )==0 ) {
-	TQCString f = fmt+6;
-	TQByteArray data;
-	TQBuffer w( data );
-	w.open( IO_WriteOnly );
-	TQImageIO io( &w, f.upper() );
-	io.setImage( img );
-	if  ( !io.write() )
-	    return TQByteArray();
-	w.close();
-	return data;
-    } else {
-	return TQByteArray();
-    }
-}
-
-/*!
-    Returns TRUE if the information in mime source \a e can be decoded
-    into an image; otherwise returns FALSE.
-
-    \sa decode()
-*/
-bool TQImageDrag::canDecode( const TQMimeSource* e ) {
-    TQStrList fileFormats = TQImageIO::inputFormats();
-
-    fileFormats.first();
-    while ( fileFormats.current()) {
-	TQCString format = fileFormats.current();
-	TQCString type = "image/" + format.lower();
-	if ( e->provides(type.data()))
-	    return TRUE;
-	fileFormats.next();
-    }
-
-    return FALSE;
-}
-
-/*!
-    Attempts to decode the dropped information in mime source \a e
-    into \a img. Returns TRUE if successful; otherwise returns FALSE.
-
-    \sa canDecode()
-*/
-bool TQImageDrag::decode( const TQMimeSource* e, QImage& img )
-{
-    if ( !e )
-	return FALSE;
-    if ( e->cacheType == TQMimeSource::Graphics ) {
-	img = *e->cache.gfx.img;
-	return TRUE;
-    }
-
-    TQByteArray payload;
-    TQStrList fileFormats = TQImageIO::inputFormats();
-    // PNG is best of all
-    if ( fileFormats.remove("PNG") ) // move to front
-	fileFormats.insert(0,"PNG");
-    fileFormats.first();
-    while ( fileFormats.current() ) {
-	TQCString format = fileFormats.current();
-	fileFormats.next();
-
-       	TQCString type = "image/" + format.lower();
-	if ( ! e->provides( type.data() ) ) continue;
-	payload = e->tqencodedData( type.data() );
-	if ( !payload.isEmpty() )
-	    break;
-    }
-
-    if ( payload.isEmpty() )
-	return FALSE;
-
-    img.loadFromData(payload);
-    if ( img.isNull() )
-	return FALSE;
-    TQMimeSource *m = (TQMimeSource*)e;
-    m->clearCache();
-    m->cacheType = TQMimeSource::Graphics;
-    m->cache.gfx.img = new TQImage( img );
-    m->cache.gfx.pix = 0;
-    return TRUE;
-}
-
-/*!
-    \overload
-
-    Attempts to decode the dropped information in mime source \a e
-    into pixmap \a pm. Returns TRUE if successful; otherwise returns
-    FALSE.
-
-    This is a convenience function that converts to a TQPixmap via a
-    TQImage.
-
-    \sa canDecode()
-*/
-bool TQImageDrag::decode( const TQMimeSource* e, QPixmap& pm )
-{
-    if ( !e )
-	return FALSE;
-
-    if ( e->cacheType == TQMimeSource::Graphics && e->cache.gfx.pix) {
-	pm = *e->cache.gfx.pix;
-	return TRUE;
-    }
-
-    TQImage img;
-    // We avoid dither, since the image probably came from this display
-    if ( decode( e, img ) ) {
-	if ( !pm.convertFromImage( img, Qt::AvoidDither ) )
-	    return FALSE;
-	// decode initialized the cache for us
-
-	TQMimeSource *m = (TQMimeSource*)e;
-	m->cache.gfx.pix = new TQPixmap( pm );
-	return TRUE;
-    }
-    return FALSE;
-}
-
-
-
-
-/*!
-    \class TQStoredDrag tqdragobject.h
-    \brief The TQStoredDrag class provides a simple stored-value drag object for arbitrary MIME data.
-
-    \ingroup draganddrop
-
-    When a block of data has only one representation, you can use a
-    TQStoredDrag to hold it.
-
-    For more information about drag and drop, see the TQDragObject
-    class and the \link dnd.html drag and drop documentation\endlink.
-*/
-
-/*!
-    Constructs a TQStoredDrag. The \a dragSource and \a name are passed
-    to the TQDragObject constructor, and the format is set to \a
-    mimeType.
-
-    The data will be unset. Use setEncodedData() to set it.
-*/
-TQStoredDrag::TQStoredDrag( const char* mimeType, QWidget * dragSource, const char * name ) :
-    TQDragObject(dragSource,name)
-{
-    d = new TQStoredDragData();
-    d->fmt = qstrdup(mimeType);
-}
-
-/*!
-    Destroys the drag object and frees up all allocated resources.
-*/
-TQStoredDrag::~TQStoredDrag()
-{
-    delete [] (char*)d->fmt;
-    delete d;
-}
-
-/*!
-    \reimp
-*/
-const char * TQStoredDrag::format(int i) const
-{
-    if ( i==0 )
-	return d->fmt;
-    else
-	return 0;
-}
-
-
-/*!
-    Sets the encoded data of this drag object to \a tqencodedData. The
-    encoded data is what's delivered to the drop sites. It must be in
-    a strictly defined and portable format.
-
-    The drag object can't be dropped (by the user) until this function
-    has been called.
-*/
-
-void TQStoredDrag::setEncodedData( const TQByteArray & tqencodedData )
-{
-    d->enc = tqencodedData.copy();
-}
-
-/*!
-    Returns the stored data. \a m contains the data's format.
-
-    \sa setEncodedData()
-*/
-TQByteArray TQStoredDrag::tqencodedData(const char* m) const
-{
-    if ( !qstricmp(m,d->fmt) )
-	return d->enc;
-    else
-	return TQByteArray();
-}
-
-
-/*!
-    \class TQUriDrag tqdragobject.h
-    \brief The TQUriDrag class provides a drag object for a list of URI references.
-
-    \ingroup draganddrop
-
-    URIs are a useful way to refer to files that may be distributed
-    across multiple machines. A URI will often refer to a file on a
-    machine local to both the drag source and the drop target, so the
-    URI can be equivalent to passing a file name but is more
-    extensible.
-
-    Use URIs in Unicode form so that the user can comfortably edit and
-    view them. For use in HTTP or other protocols, use the correctly
-    escaped ASCII form.
-
-    You can convert a list of file names to file URIs using
-    setFileNames(), or into human-readble form with setUnicodeUris().
-
-    Static functions are provided to convert between filenames and
-    URIs, e.g. uriToLocalFile() and localFileToUri(), and to and from
-    human-readable form, e.g. uriToUnicodeUri(), tqunicodeUriToUri().
-    You can also decode URIs from a mimesource into a list with
-    decodeLocalFiles() and decodeToUnicodeUris().
-*/
-
-/*!
-    Constructs an object to drag the list of URIs in \a uris. The \a
-    dragSource and \a name arguments are passed on to TQStoredDrag.
-    Note that URIs are always in escaped UTF8 encoding.
-*/
-TQUriDrag::TQUriDrag( TQStrList uris,
-	    TQWidget * dragSource, const char * name ) :
-    TQStoredDrag( "text/uri-list", dragSource, name )
-{
-    setUris(uris);
-}
-
-/*!
-    Constructs an object to drag. You must call setUris() before you
-    start the drag(). Passes \a dragSource and \a name to the
-    TQStoredDrag constructor.
-*/
-TQUriDrag::TQUriDrag( TQWidget * dragSource, const char * name ) :
-    TQStoredDrag( "text/uri-list", dragSource, name )
-{
-}
-
-/*!
-    Destroys the object.
-*/
-TQUriDrag::~TQUriDrag()
-{
-}
-
-/*!
-    Changes the list of \a uris to be dragged.
-
-    Note that URIs are always in escaped UTF8 encoding.
-*/
-void TQUriDrag::setUris( TQStrList uris )
-{
-    TQByteArray a;
-    int c=0;
-    for ( const char* s = uris.first(); s; s = uris.next() ) {
-	int l = tqstrlen(s);
-	a.resize(c+l+2);
-	memcpy(a.data()+c,s,l);
-	memcpy(a.data()+c+l,"\r\n",2);
-	c+=l+2;
-    }
-    a.resize(c+1);
-    a[c] = 0;
-    setEncodedData(a);
-}
-
-
-/*!
-    Returns TRUE if decode() would be able to decode \a e; otherwise
-    returns FALSE.
-*/
-bool TQUriDrag::canDecode( const TQMimeSource* e )
-{
-    return e->provides( "text/uri-list" );
-}
-
-/*!
-    Decodes URIs from \a e, placing the result in \a l (which is first
-    cleared).
-
-    Returns TRUE if \a e contained a valid list of URIs; otherwise
-    returns FALSE.
-*/
-bool TQUriDrag::decode( const TQMimeSource* e, TQStrList& l )
-{
-    TQByteArray payload = e->tqencodedData( "text/uri-list" );
-    if ( payload.size() ) {
-	l.clear();
-	l.setAutoDelete(TRUE);
-	uint c=0;
-	const char* d = payload.data();
-	while (c < payload.size() && d[c]) {
-	    uint f = c;
-	    // Find line end
-	    while (c < payload.size() && d[c] && d[c]!='\r'
-		    && d[c] != '\n')
-		c++;
-	    TQCString s(d+f,c-f+1);
-	    if ( s[0] != '#' ) // non-comment?
-		l.append( s );
-	    // Skip junk
-	    while (c < payload.size() && d[c] &&
-		    (d[c]=='\n' || d[c]=='\r'))
-		c++;
-	}
-	return TRUE;
-    }
-    return FALSE;
-}
-
-static uint htod( int h )
-{
-    if ( isdigit(h) )
-	return h - '0';
-    return tolower( h ) - 'a' + 10;
-}
-
-/*!
-  \fn TQUriDrag::setFilenames( const TQStringList & )
-  \obsolete
-
-  Use setFileNames() instead (notice the N).
-*/
-
-/*!
-    Sets the URIs to be the local-file URIs equivalent to \a fnames.
-
-    \sa localFileToUri(), setUris()
-*/
-void TQUriDrag::setFileNames( const TQStringList & fnames )
-{
-    TQStrList uris;
-    for ( TQStringList::ConstIterator i = fnames.begin();
-    i != fnames.end(); ++i ) {
-	TQCString fileUri = localFileToUri(*i);
-	if (!fileUri.isEmpty())
-	    uris.append(fileUri);
-    }
-    setUris( uris );
-}
-
-/*!
-    Sets the URIs in \a uuris to be the Unicode URIs (only useful for
-    displaying to humans).
-
-    \sa localFileToUri(), setUris()
-*/
-void TQUriDrag::setUnicodeUris( const TQStringList & uuris )
-{
-    TQStrList uris;
-    for ( TQStringList::ConstIterator i = uuris.begin();
-	    i != uuris.end(); ++i )
-	uris.append( tqunicodeUriToUri(*i) );
-    setUris( uris );
-}
-
-/*!
-    Returns the URI equivalent of the Unicode URI given in \a uuri
-    (only useful for displaying to humans).
-
-    \sa uriToLocalFile()
-*/
-TQCString TQUriDrag::tqunicodeUriToUri(const TQString& uuri)
-{
-    TQCString utf8 = uuri.utf8();
-    TQCString escutf8;
-    int n = utf8.length();
-    bool isFile = uuri.startsWith("file://");
-    for (int i=0; i<n; i++) {
-	if ( (utf8[i] >= 'a' && utf8[i] <= 'z')
-	  || utf8[i] == '/'
-	  || (utf8[i] >= '0' && utf8[i] <= '9')
-	  || (utf8[i] >= 'A' && utf8[i] <= 'Z')
-
-	  || utf8[i] == '-' || utf8[i] == '_'
-	  || utf8[i] == '.' || utf8[i] == '!'
-	  || utf8[i] == '~' || utf8[i] == '*'
-	  || utf8[i] == '(' || utf8[i] == ')'
-	  || utf8[i] == '\''
-
-	  // Allow this through, so that all URI-references work.
-          || (!isFile && utf8[i] == '#')
-
-	  || utf8[i] == ';'
-	  || utf8[i] == '?' || utf8[i] == ':'
-	  || utf8[i] == '@' || utf8[i] == '&'
-	  || utf8[i] == '=' || utf8[i] == '+'
-	  || utf8[i] == '$' || utf8[i] == ',' )
-	{
-	    escutf8 += utf8[i];
-	} else {
-	    // Everything else is escaped as %HH
-	    TQCString s(4);
-	    s.sprintf("%%%02x",(uchar)utf8[i]);
-	    escutf8 += s;
-	}
-    }
-    return escutf8;
-}
-
-/*!
-    Returns the URI equivalent to the absolute local file \a filename.
-
-    \sa uriToLocalFile()
-*/
-TQCString TQUriDrag::localFileToUri(const TQString& filename)
-{
-    TQString r = filename;
-
-    //check that it is an absolute file
-    if (TQDir::isRelativePath(r))
-	return TQCString();
-
-#ifdef TQ_WS_WIN
-
-
-    bool hasHost = FALSE;
-    // convert form network path
-    if (r.left(2) == "\\\\" || r.left(2) == "//") {
-	r.remove(0, 2);
-	hasHost = TRUE;
-    }
-
-    // Slosh -> Slash
-    int slosh;
-    while ( (slosh=r.find('\\')) >= 0 ) {
-	r[slosh] = '/';
-    }
-
-    // Drive
-    if ( r[0] != '/' && !hasHost)
-	r.insert(0,'/');
-
-#endif
-#if defined ( TQ_WS_X11 ) && 0
-    // URL without the hostname is considered to be errorneous by XDnD.
-    // See: http://www.newplanetsoftware.com/xdnd/dragging_files.html
-    // This feature is not active because this would break dnd between old and new qt apps.
-    char hostname[257];
-    if ( gethostname( hostname, 255 ) == 0 ) {
-	hostname[256] = '\0';
-	r.prepend( TQString::tqfromLatin1( hostname ) );
-    }
-#endif
-    return tqunicodeUriToUri(TQString("file://" + r));
-}
-
-/*!
-    Returns the Unicode URI (only useful for displaying to humans)
-    equivalent of \a uri.
-
-    Note that URIs are always in escaped UTF8 encoding.
-
-    \sa localFileToUri()
-*/
-TQString TQUriDrag::uriToUnicodeUri(const char* uri)
-{
-    TQCString utf8;
-
-    while (*uri) {
-	switch (*uri) {
-	  case '%': {
-		uint ch = (uchar) uri[1];
-		if ( ch && uri[2] ) {
-		    ch = htod( ch ) * 16 + htod( (uchar) uri[2] );
-		    utf8 += (char) ch;
-		    uri += 2;
-		}
-	    }
-	    break;
-	  default:
-	    utf8 += *uri;
-	}
-	++uri;
-    }
-
-    return TQString::fromUtf8(utf8);
-}
-
-/*!
-    Returns the name of a local file equivalent to \a uri or a null
-    string if \a uri is not a local file.
-
-    Note that URIs are always in escaped UTF8 encoding.
-
-    \sa localFileToUri()
-*/
-TQString TQUriDrag::uriToLocalFile(const char* uri)
-{
-    TQString file;
-
-    if (!uri)
-	return file;
-    if (0==qstrnicmp(uri,"file:/",6)) // It is a local file uri
-	uri += 6;
-    else if (TQString(uri).find(":/") != -1) // It is a different scheme uri
-	return file;
-
-    bool local = uri[0] != '/' || ( uri[0] != '\0' && uri[1] == '/' );
-#ifdef TQ_WS_X11
-    // do we have a hostname?
-    if ( !local && uri[0] == '/' && uri[2] != '/' ) {
-	// then move the pointer to after the 'hostname/' part of the uri
-	const char* hostname_end = strchr( uri+1, '/' );
-	if ( hostname_end != NULL ) {
-	    char hostname[ 257 ];
-	    if ( gethostname( hostname, 255 ) == 0 ) {
-		hostname[ 256 ] = '\0';
-		if ( tqstrncmp( uri+1, hostname, hostname_end - ( uri+1 )) == 0 ) {
-		    uri = hostname_end + 1; // point after the slash
-		    local = TRUE;
-		}
-	    }
-	}
-    }
-#endif
-    if ( local ) {
-	file = uriToUnicodeUri(uri);
-	if ( uri[1] == '/' ) {
-	    file.remove((uint)0,1);
-	} else {
-		file.insert(0,'/');
-	}
-#ifdef TQ_WS_WIN
-	if ( file.length() > 2 && file[0] == '/' && file[2] == '|' ) {
-	    file[2] = ':';
-	    file.remove(0,1);
-	} else if (file.length() > 2 && file[0] == '/' && file[1].isLetter() && file[2] == ':') {
-	    file.remove(0, 1);
-	}
-	// Leave slash as slashes.
-#endif
-    }
-#ifdef TQ_WS_WIN
-    else {
-	file = uriToUnicodeUri(uri);
-	// convert to network path
-	file.insert(1, '/'); // leave as forward slashes
-    }
-#endif
-
-    return file;
-}
-
-/*!
-    Decodes URIs from the mime source event \a e, converts them to
-    local files if they refer to local files, and places them in \a l
-    (which is first cleared).
-
-    Returns TRUE if \e contained a valid list of URIs; otherwise
-    returns FALSE. The list will be empty if no URIs were local files.
-*/
-bool TQUriDrag::decodeLocalFiles( const TQMimeSource* e, TQStringList& l )
-{
-    TQStrList u;
-    if ( !decode( e, u ) )
-	return FALSE;
-
-    l.clear();
-    for (const char* s=u.first(); s; s=u.next()) {
-	TQString lf = uriToLocalFile(s);
-	if ( !lf.isNull() )
-	    l.append( lf );
-    }
-    return TRUE;
-}
-
-/*!
-    Decodes URIs from the mime source event \a e, converts them to
-    Unicode URIs (only useful for displaying to humans), placing them
-    in \a l (which is first cleared).
-
-    Returns TRUE if \e contained a valid list of URIs; otherwise
-    returns FALSE.
-*/
-bool TQUriDrag::decodeToUnicodeUris( const TQMimeSource* e, TQStringList& l )
-{
-    TQStrList u;
-    if ( !decode( e, u ) )
-	return FALSE;
-
-    l.clear();
-    for (const char* s=u.first(); s; s=u.next())
-	l.append( uriToUnicodeUri(s) );
-
-    return TRUE;
-}
-
-
-#ifndef TQT_NO_DRAGANDDROP
-/*!
-    If the source of the drag operation is a widget in this
-    application, this function returns that source, otherwise it
-    returns 0. The source of the operation is the first parameter to
-    drag object subclasses.
-
-    This is useful if your widget needs special behavior when dragging
-    to itself, etc.
-
-    See TQDragObject::TQDragObject() and subclasses.
-*/
-TQWidget* TQDropEvent::source() const
-{
-    return qt_dnd_manager ? qt_dnd_manager->dragSource : 0;
-}
-#endif
-
-/*!
-    \class TQColorDrag tqdragobject.h
-
-    \brief The TQColorDrag class provides a drag and drop object for
-    transferring colors.
-
-    \ingroup draganddrop
-
-    This class provides a drag object which can be used to transfer data
-    about colors for drag and drop and in the clipboard. For example, it
-    is used in TQColorDialog.
-
-    The color is set in the constructor but can be changed with
-    setColor().
-
-    For more information about drag and drop, see the TQDragObject class
-    and the \link dnd.html drag and drop documentation\endlink.
-*/
-
-/*!
-    Constructs a color drag object with the color \a col. Passes \a
-    dragsource and \a name to the TQStoredDrag constructor.
-*/
-
-TQColorDrag::TQColorDrag( const TQColor &col, TQWidget *dragsource, const char *name )
-    : TQStoredDrag( "application/x-color", dragsource, name )
-{
-    setColor( col );
-}
-
-/*!
-    Constructs a color drag object with a white color. Passes \a
-    dragsource and \a name to the TQStoredDrag constructor.
-*/
-
-TQColorDrag::TQColorDrag( TQWidget *dragsource, const char *name )
-    : TQStoredDrag( "application/x-color", dragsource, name )
-{
-    setColor( TQt::white );
-}
-
-/*!
-    Sets the color of the color drag to \a col.
-*/
-
-void TQColorDrag::setColor( const TQColor &col )
-{
-    short r = (col.red()   << 8) | col.red();
-    short g = (col.green() << 8) | col.green();
-    short b = (col.blue()  << 8) | col.blue();
-
-    // make sure we transmit data in network order
-    r = htons(r);
-    g = htons(g);
-    b = htons(b);
-
-    ushort rgba[4] = {
-	r, g, b,
-	0xffff // Alpha not supported yet.
-    };
-    TQByteArray data(sizeof(rgba));
-    memcpy(data.data(), rgba, sizeof(rgba));
-    setEncodedData(data);
-}
-
-/*!
-    Returns TRUE if the color drag object can decode the mime source
-    \a e; otherwise returns FALSE.
-*/
-
-bool TQColorDrag::canDecode( TQMimeSource *e )
-{
-    return e->provides( "application/x-color" );
-}
-
-/*!
-    Decodes the mime source \a e and sets the decoded values to \a
-    col.
-*/
-
-bool TQColorDrag::decode( TQMimeSource *e, TQColor &col )
-{
-    TQByteArray data = e->tqencodedData("application/x-color");
-    ushort rgba[4];
-    if (data.size() != sizeof(rgba))
-	return FALSE;
-
-    memcpy(rgba, data.data(), sizeof(rgba));
-
-    short r = rgba[0];
-    short g = rgba[1];
-    short b = rgba[2];
-
-    // data is in network order
-    r = ntohs(r);
-    g = ntohs(g);
-    b = ntohs(b);
-
-    r = (r >> 8) & 0xff;
-    g = (g >> 8) & 0xff;
-    b = (b >> 8) & 0xff;
-
-    col.setRgb(r, g, b);
-    return TRUE;
-}
-
-#endif // TQT_NO_MIME
-
-#endif // USE_QT4
\ No newline at end of file