diff options
Diffstat (limited to 'debian/uncrustify-trinity/uncrustify-trinity-0.78.1/etc/ben.cfg')
| -rw-r--r-- | debian/uncrustify-trinity/uncrustify-trinity-0.78.1/etc/ben.cfg | 1220 |
1 files changed, 1220 insertions, 0 deletions
diff --git a/debian/uncrustify-trinity/uncrustify-trinity-0.78.1/etc/ben.cfg b/debian/uncrustify-trinity/uncrustify-trinity-0.78.1/etc/ben.cfg new file mode 100644 index 00000000..269b3cb1 --- /dev/null +++ b/debian/uncrustify-trinity/uncrustify-trinity-0.78.1/etc/ben.cfg @@ -0,0 +1,1220 @@ +# +# General options +# + +# The type of line endings +newlines = lf # auto/lf/crlf/cr + +# The original size of tabs in the input +input_tab_size = 8 # number + +# The size of tabs in the output (only used if align_with_tabs=true) +output_tab_size = 3 # number + +# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn) +string_escape_char = 92 # number + +# Alternate string escape char for Pawn. Only works right before the quote char. +string_escape_char2 = 0 # number + +# Replace tab characters found in string literals with the escape sequence \t instead. +string_replace_tab_chars = false # false/true + +# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'. +# If true (default), 'assert(x<0 && y>=3)' will be broken. +# Improvements to template detection may make this option obsolete. +tok_split_gte = false # false/true + +# Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file. +disable_processing_cmt = "" # string + +# Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file. +enable_processing_cmt = "" # string + +# Enable parsing of digraphs. Default=false +enable_digraphs = false # false/true + +# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8 +utf8_byte = false # false/true + +# Force the output encoding to UTF-8 +utf8_force = false # false/true + +# +# Indenting +# + +# The number of columns to indent per level. +# Usually 2, 3, 4, or 8. +indent_columns = 3 # number + +# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents. +# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level +indent_continue = 0 # number + +# How to use tabs when indenting code +# 0=spaces only +# 1=indent with tabs to brace level, align with spaces +# 2=indent and align with tabs, using spaces when not on a tabstop +indent_with_tabs = 0 # number + +# Comments that are not a brace level are indented with tabs on a tabstop. +# Requires indent_with_tabs=2. If false, will use spaces. +indent_cmt_with_tabs = false # false/true + +# Whether to indent strings broken by '\' so that they line up +indent_align_string = true # false/true + +# The number of spaces to indent multi-line XML strings. +# Requires indent_align_string=True +indent_xml_string = 0 # number + +# Spaces to indent '{' from level +indent_brace = 0 # number + +# Whether braces are indented to the body level +indent_braces = false # false/true + +# Disabled indenting function braces if indent_braces is true +indent_braces_no_func = false # false/true + +# Disabled indenting class braces if indent_braces is true +indent_braces_no_class = false # false/true + +# Disabled indenting struct braces if indent_braces is true +indent_braces_no_struct = false # false/true + +# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc. +indent_brace_parent = false # false/true + +# Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace. +indent_paren_open_brace = false # false/true + +# Whether the 'namespace' body is indented +indent_namespace = false # false/true + +# Only indent one namespace and no sub-namespaces. +# Requires indent_namespace=true. +indent_namespace_single_indent = false # false/true + +# The number of spaces to indent a namespace block +indent_namespace_level = 0 # number + +# If the body of the namespace is longer than this number, it won't be indented. +# Requires indent_namespace=true. Default=0 (no limit) +indent_namespace_limit = 0 # number + +# Whether the 'extern "C"' body is indented +indent_extern = false # false/true + +# Whether the 'class' body is indented +indent_class = true # false/true + +# Whether to indent the stuff after a leading base class colon +indent_class_colon = true # false/true + +# Indent based on a class colon instead of the stuff after the colon. +# Requires indent_class_colon=true. Default=false +indent_class_on_colon = false # false/true + +# Whether to indent the stuff after a leading class initializer colon +indent_constr_colon = false # false/true + +# Virtual indent from the ':' for member initializers. Default is 2 +indent_ctor_init_leading = 2 # number + +# Additional indenting for constructor initializer list +indent_ctor_init = 0 # number + +# False=treat 'else\nif' as 'else if' for indenting purposes +# True=indent the 'if' one level +indent_else_if = false # false/true + +# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute +indent_var_def_blk = 0 # number + +# Indent continued variable declarations instead of aligning. +indent_var_def_cont = false # false/true + +# How to indent continued shift expressions ('<<' and '>>'). +# Set align_left_shift=false when using this. +# 0: Align shift operators instead of indenting them (default) +# 1: Indent by one level +# -1: Preserve original indentation +indent_shift = 0 # number + +# True: force indentation of function definition to start in column 1 +# False: use the default behavior +indent_func_def_force_col1 = false # false/true + +# True: indent continued function call parameters one indent level +# False: align parameters under the open paren +indent_func_call_param = false # false/true + +# Same as indent_func_call_param, but for function defs +indent_func_def_param = false # false/true + +# Same as indent_func_call_param, but for function protos +indent_func_proto_param = false # false/true + +# Same as indent_func_call_param, but for class declarations +indent_func_class_param = false # false/true + +# Same as indent_func_call_param, but for class variable constructors +indent_func_ctor_var_param = false # false/true + +# Same as indent_func_call_param, but for templates +indent_template_param = false # false/true + +# Double the indent for indent_func_xxx_param options +indent_func_param_double = false # false/true + +# Indentation column for standalone 'const' function decl/proto qualifier +indent_func_const = 0 # number + +# Indentation column for standalone 'throw' function decl/proto qualifier +indent_func_throw = 0 # number + +# The number of spaces to indent a continued '->' or '.' +# Usually set to 0, 1, or indent_columns. +indent_member = 3 # number + +# Spaces to indent single line ('//') comments on lines before code +indent_single_line_comments_before = 0 # number + +# If set, will indent trailing single line ('//') comments relative +# to the code instead of trying to keep the same absolute column +indent_relative_single_line_comments = false # false/true + +# Spaces to indent 'case' from 'switch' +# Usually 0 or indent_columns. +indent_switch_case = 0 # number + +# Spaces to shift the 'case' line, without affecting any other lines +# Usually 0. +indent_case_shift = 0 # number + +# Spaces to indent '{' from 'case'. +# By default, the brace will appear under the 'c' in case. +# Usually set to 0 or indent_columns. +indent_case_brace = 3 # number + +# Whether to indent comments found in first column +indent_col1_comment = false # false/true + +# How to indent goto labels +# >0 : absolute column where 1 is the leftmost column +# <=0 : subtract from brace indent +indent_label = 1 # number + +# Same as indent_label, but for access specifiers that are followed by a colon +indent_access_spec = 1 # number + +# Indent the code after an access specifier by one level. +# If set, this option forces 'indent_access_spec=0' +indent_access_spec_body = false # false/true + +# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended) +indent_paren_nl = false # false/true + +# Controls the indent of a close paren after a newline. +# 0: Indent to body level +# 1: Align under the open paren +# 2: Indent to the brace level +# -1: Preserve original indentation +indent_paren_close = 0 # number + +# Controls the indent of a comma when inside a paren.If 1, aligns under the open paren +indent_comma_paren = 0 # number + +# Controls the indent of a BOOL operator when inside a paren.If 1, aligns under the open paren +indent_bool_paren = 0 # number + +# If 'indent_bool_paren' is 1, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones +indent_first_bool_expr = false # false/true + +# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended) +indent_square_nl = false # false/true + +# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies +indent_preserve_sql = false # false/true + +# Align continued statements at the '='. Default=True +# If FALSE or the '=' is followed by a newline, the next line is indent one tab. +indent_align_assign = true # false/true + +# Indent OC blocks at brace level instead of usual rules. +indent_oc_block = false # false/true + +# Indent OC blocks in a message relative to the parameter name. +# 0=use indent_oc_block rules, 1+=spaces to indent +indent_oc_block_msg = 0 # number + +# Minimum indent for subsequent parameters +indent_oc_msg_colon = 0 # number + +# If true, prioritize aligning with initial colon (and stripping spaces from lines, if necessary). +# Default is true. +indent_oc_msg_prioritize_first_colon = true # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level). +indent_oc_block_msg_xcode_style = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword. +indent_oc_block_msg_from_keyword = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon. +indent_oc_block_msg_from_colon = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is. +indent_oc_block_msg_from_caret = false # false/true + +# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is. +indent_oc_block_msg_from_brace = false # false/true + +# When identing after virtual brace open and newline add further spaces to reach this min. indent. +indent_min_vbrace_open = 0 # number + +# TRUE: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop. +indent_vbrace_open_on_tabstop = false # false/true + +# +# Spacing options +# + +# Add or remove space around arithmetic operator '+', '-', '/', '*', etc +# also '>>>' '<<' '>>' '%' '|' +sp_arith = force # ignore/add/remove/force + +# Add or remove space around assignment operator '=', '+=', etc +sp_assign = force # ignore/add/remove/force + +# Add or remove space around preprocessor '##' concatenation operator. Default=Add +sp_pp_concat = add # ignore/add/remove/force + +# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator. +sp_pp_stringify = add # ignore/add/remove/force + +# Add or remove space around boolean operators '&&' and '||' +sp_bool = force # ignore/add/remove/force + +# Add or remove space around compare operator '<', '>', '==', etc +sp_compare = force # ignore/add/remove/force + +# Add or remove space inside '(' and ')' +sp_inside_paren = remove # ignore/add/remove/force + +# Add or remove space between nested parens: '((' vs ') )' +sp_paren_paren = remove # ignore/add/remove/force + +# Whether to balance spaces inside nested parens +sp_balance_nested_parens = false # false/true + +# Add or remove space before pointer star '*' +sp_before_ptr_star = force # ignore/add/remove/force + +# Add or remove space between pointer stars '*' +sp_between_ptr_star = remove # ignore/add/remove/force + +# Add or remove space after pointer star '*', if followed by a word. +sp_after_ptr_star = remove # ignore/add/remove/force + +# Add or remove space before a reference sign '&' +sp_before_byref = remove # ignore/add/remove/force + +# Add or remove space after reference sign '&', if followed by a word. +sp_after_byref = force # ignore/add/remove/force + +# Add or remove space between type and word. Default=Force +sp_after_type = force # ignore/add/remove/force + +# Add or remove space before '<>' +sp_before_angle = remove # ignore/add/remove/force + +# Add or remove space inside '<' and '>' +sp_inside_angle = remove # ignore/add/remove/force + +# Add or remove space after '<>' +sp_after_angle = force # ignore/add/remove/force + +# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add +sp_angle_shift = add # ignore/add/remove/force + +# Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False +# sp_angle_shift cannot remove the space without this option. +sp_permit_cpp11_shift = false # false/true + +# Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc. +sp_before_sparen = force # ignore/add/remove/force + +# Add or remove space inside if-condition '(' and ')' +sp_inside_sparen = remove # ignore/add/remove/force + +# Add or remove space inside for-loop '(' and ')' +sp_inside_for = remove # ignore/add/remove/force + +# Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc. +sp_after_sparen = force # ignore/add/remove/force + +# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc. +sp_sparen_brace = add # ignore/add/remove/force + +# Add or remove space before ';'. Default=Remove +sp_before_semi = remove # ignore/add/remove/force + +# Add or remove space before a semicolon of an empty left part of a for statement. +sp_before_semi_for_empty = force # ignore/add/remove/force + +# Add or remove space between the semicolons of an empty middle part of a for statement. +sp_between_semi_for_empty = force # ignore/add/remove/force + +# Add or remove space after ';', except when followed by a comment. Default=Add +sp_after_semi = add # ignore/add/remove/force + +# Add or remove space after ';' in non-empty 'for' statements. Default=Force +sp_after_semi_for = force # ignore/add/remove/force + +# Add or remove space inside a non-empty '[' and ']' +sp_inside_square = remove # ignore/add/remove/force + +# Add or remove space after ',' +sp_after_comma = force # ignore/add/remove/force + +# Add or remove space before ',' +sp_before_comma = remove # ignore/add/remove/force + +# Add or remove space between an open paren and comma: '(,' vs '( ,' +sp_paren_comma = force # ignore/add/remove/force + +# Add or remove space before case ':'. Default=Remove +sp_before_case_colon = remove # ignore/add/remove/force + +# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a' +sp_after_cast = remove # ignore/add/remove/force + +# Add or remove space between 'sizeof' and '(' +sp_sizeof_paren = remove # ignore/add/remove/force + +# Add or remove space inside enum '{' and '}' +sp_inside_braces_enum = force # ignore/add/remove/force + +# Add or remove space inside struct/union '{' and '}' +sp_inside_braces_struct = force # ignore/add/remove/force + +# Add or remove space inside '{' and '}' +sp_inside_braces = force # ignore/add/remove/force + +# Add or remove space between return type and function name +# A minimum of 1 is forced except for pointer return types. +sp_type_func = force # ignore/add/remove/force + +# Add or remove space between function name and '(' on function declaration +sp_func_proto_paren = remove # ignore/add/remove/force + +# Add or remove space between function name and '(' on function definition +sp_func_def_paren = remove # ignore/add/remove/force + +# Add or remove space inside function '(' and ')' +sp_inside_fparen = remove # ignore/add/remove/force + +# Add or remove space between ')' and '{' of function +sp_fparen_brace = add # ignore/add/remove/force + +# Add or remove space between function name and '(' on function calls +sp_func_call_paren = remove # ignore/add/remove/force + +# Add or remove space between a constructor/destructor and the open paren +sp_func_class_paren = remove # ignore/add/remove/force + +# Add or remove space between 'return' and '(' +sp_return_paren = remove # ignore/add/remove/force + +# Add or remove space between '}' and the name of a typedef on the same line +sp_brace_typedef = force # ignore/add/remove/force + +# Add or remove space between type and open brace of an unnamed temporary +# direct-list-initialization. +sp_type_brace_init_lst = add # ignore/add/remove/force + +# Add or remove space between a variable and '{' for a namespace +sp_word_brace_ns = add # ignore/add/remove/force + +# Add or remove space before the '::' operator +sp_before_dc = remove # ignore/add/remove/force + +# Add or remove space after the '::' operator +sp_after_dc = remove # ignore/add/remove/force + +# Add or remove space after the '!' (not) operator. Default=Remove +sp_not = remove # ignore/add/remove/force + +# Add or remove space after the '~' (invert) operator. Default=Remove +sp_inv = remove # ignore/add/remove/force + +# Add or remove space after the '&' (address-of) operator. Default=Remove +# This does not affect the spacing after a '&' that is part of a type. +sp_addr = remove # ignore/add/remove/force + +# Add or remove space around the '.' or '->' operators. Default=Remove +sp_member = remove # ignore/add/remove/force + +# Add or remove space after the '*' (dereference) operator. Default=Remove +# This does not affect the spacing after a '*' that is part of a type. +sp_deref = remove # ignore/add/remove/force + +# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove +sp_sign = remove # ignore/add/remove/force + +# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove +sp_incdec = remove # ignore/add/remove/force + +# Add or remove space before a backslash-newline at the end of a line. Default=Add +sp_before_nl_cont = add # ignore/add/remove/force + +# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here. +sp_case_label = remove # ignore/add/remove/force + +# TRUE: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'. +sp_cmt_cpp_doxygen = false # false/true + +# TRUE: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'. +sp_cmt_cpp_qttr = false # false/true + +# Number of spaces before a trailing comment +sp_num_before_tr_cmt = 0 # number + +# +# Code alignment (not left column spaces/tabs) +# + +# Whether to keep non-indenting tabs +align_keep_tabs = false # false/true + +# Whether to use tabs for aligning +align_with_tabs = false # false/true + +# Whether to bump out to the next tab when aligning +align_on_tabstop = false # false/true + +# Whether to right-align numbers +align_number_right = true # false/true + +# Whether to keep whitespace not required for alignment. +align_keep_extra_space = false # false/true + +# Align variable definitions in prototypes and functions +align_func_params = true # false/true + +# Align parameters in single-line functions that have the same name. +# The function names must already be aligned with each other. +align_same_func_call_params = false # false/true + +# The span for aligning parameters in single line functions with the same name (0=don't align). +align_same_func_call_params_span = 0 # unsigned number + +# The thresh for aligning function call parameters (0=no limit). +align_same_func_call_params_thresh = 0 # unsigned number + +# The span for aligning variable definitions (0=don't align) +align_var_def_span = 1 # number + +# How to align the star in variable definitions. +# 0=Part of the type 'void * foo;' +# 1=Part of the variable 'void *foo;' +# 2=Dangling 'void *foo;' +align_var_def_star_style = 1 # number + +# How to align the '&' in variable definitions. +# 0=Part of the type +# 1=Part of the variable +# 2=Dangling +align_var_def_amp_style = 0 # number + +# The threshold for aligning variable definitions (0=no limit) +align_var_def_thresh = 16 # number + +# The gap for aligning variable definitions +align_var_def_gap = 0 # number + +# Whether to align the colon in struct bit fields +align_var_def_colon = true # false/true + +# Whether to align any attribute after the variable name +align_var_def_attribute = false # false/true + +# Whether to align inline struct/enum/union variable definitions +align_var_def_inline = true # false/true + +# The span for aligning on '=' in assignments (0=don't align) +align_assign_span = 1 # number + +# The threshold for aligning on '=' in assignments (0=no limit) +align_assign_thresh = 12 # number + +# The span for aligning on '=' in enums (0=don't align) +align_enum_equ_span = 16 # number + +# The threshold for aligning on '=' in enums (0=no limit) +align_enum_equ_thresh = 0 # number + +# The span for aligning struct/union (0=don't align) +align_var_struct_span = 99 # number + +# The threshold for aligning struct/union member definitions (0=no limit) +align_var_struct_thresh = 0 # number + +# The gap for aligning struct/union member definitions +align_var_struct_gap = 0 # number + +# The span for aligning struct initializer values (0=don't align) +align_struct_init_span = 3 # number + +# The minimum space between the type and the synonym of a typedef +align_typedef_gap = 3 # number + +# The span for aligning single-line typedefs (0=don't align) +align_typedef_span = 5 # number + +# How to align typedef'd functions with other typedefs +# 0: Don't mix them at all +# 1: align the open paren with the types +# 2: align the function type name with the other type names +align_typedef_func = 0 # number + +# Controls the positioning of the '*' in typedefs. Just try it. +# 0: Align on typedef type, ignore '*' +# 1: The '*' is part of type name: typedef int *pint; +# 2: The '*' is part of the type, but dangling: typedef int *pint; +align_typedef_star_style = 0 # number + +# Controls the positioning of the '&' in typedefs. Just try it. +# 0: Align on typedef type, ignore '&' +# 1: The '&' is part of type name: typedef int &pint; +# 2: The '&' is part of the type, but dangling: typedef int &pint; +align_typedef_amp_style = 0 # number + +# The span for aligning comments that end lines (0=don't align) +align_right_cmt_span = 3 # number + +# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment +align_right_cmt_mix = false # false/true + +# If a trailing comment is more than this number of columns away from the text it follows, +# it will qualify for being aligned. This has to be > 0 to do anything. +align_right_cmt_gap = 0 # number + +# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore) +align_right_cmt_at_col = 0 # number + +# The span for aligning function prototypes (0=don't align) +align_func_proto_span = 0 # number + +# Minimum gap between the return type and the function name. +align_func_proto_gap = 0 # number + +# Align function protos on the 'operator' keyword instead of what follows +align_on_operator = false # false/true + +# Whether to mix aligning prototype and variable declarations. +# If true, align_var_def_XXX options are used instead of align_func_proto_XXX options. +align_mix_var_proto = false # false/true + +# Align single-line functions with function prototypes, uses align_func_proto_span +align_single_line_func = false # false/true + +# Aligning the open brace of single-line functions. +# Requires align_single_line_func=true, uses align_func_proto_span +align_single_line_brace = false # false/true + +# Gap for align_single_line_brace. +align_single_line_brace_gap = 0 # number + +# The span for aligning ObjC msg spec (0=don't align) +align_oc_msg_spec_span = 0 # number + +# Whether and how to align backslashes that split a macro onto multiple lines. +# This will not work right if the macro contains a multi-line comment. +# +# 0: Do nothing (default) +# 1: Align the backslashes in the column at the end of the longest line +# 2: Align with the backslash that is farthest to the left, or, if that +# backslash is farther left than the end of the longest line, at the end of +# the longest line +# 3: Align with the backslash that is farthest to the right +align_nl_cont = 0 # number + +# # Align macro functions and variables together +align_pp_define_together = false # false/true + +# The minimum space between label and value of a preprocessor define +align_pp_define_gap = 4 # number + +# The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks) +align_pp_define_span = 3 # number + +# Align lines that start with '<<' with previous '<<'. Default=true +align_left_shift = true # false/true + +# Align text after asm volatile () colons. +align_asm_colon = true # false/true + +# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align) +align_oc_msg_colon_span = 0 # number + +# If true, always align with the first parameter, even if it is too short. +align_oc_msg_colon_first = false # false/true + +# Aligning parameters in an Obj-C '+' or '-' declaration on the ':' +align_oc_decl_colon = false # false/true + +# +# Newline adding and removing options +# + +# Whether to collapse empty blocks between '{' and '}' +nl_collapse_empty_body = false # false/true + +# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };' +nl_assign_leave_one_liners = true # false/true + +# Don't split one-line braced statements inside a class xx { } body +nl_class_leave_one_liners = true # false/true + +# Don't split one-line enums: 'enum foo { BAR = 15 };' +nl_enum_leave_one_liners = false # false/true + +# Don't split one-line get or set functions +nl_getset_leave_one_liners = false # false/true + +# Don't split one-line function definitions - 'int foo() { return 0; }' +nl_func_leave_one_liners = false # false/true + +# Don't split one-line C++11 lambdas - '[]() { return 0; }' +nl_cpp_lambda_leave_one_liners = false # false/true + +# Don't split one-line if/else statements - 'if(a) b++;' +nl_if_leave_one_liners = false # false/true + +# Don't split one-line while statements - 'while(a) b++;' +nl_while_leave_one_liners = false # false/true + +# Don't split one-line OC messages +nl_oc_msg_leave_one_liner = false # false/true + +# Add or remove newlines at the start of the file +nl_start_of_file = remove # ignore/add/remove/force + +# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force' +nl_start_of_file_min = 0 # number + +# Add or remove newline at the end of the file +nl_end_of_file = force # ignore/add/remove/force + +# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force') +nl_end_of_file_min = 1 # number + +# Add or remove newline between '=' and '{' +nl_assign_brace = add # ignore/add/remove/force + +# The number of blank lines after a block of variable definitions at the top of a function body +# 0 = No change (default) +nl_var_def_blk_end_func_top = 1 # number + +# The number of newlines before a block of typedefs +# 0 = No change (default) +nl_typedef_blk_start = 0 # number + +# The number of newlines after a block of typedefs +# 0 = No change (default) +nl_typedef_blk_end = 0 # number + +# The maximum consecutive newlines within a block of typedefs +# 0 = No change (default) +nl_typedef_blk_in = 0 # number + +# The number of newlines before a block of variable definitions not at the top of a function body +# 0 = No change (default) +nl_var_def_blk_start = 0 # number + +# The number of newlines after a block of variable definitions not at the top of a function body +# 0 = No change (default) +nl_var_def_blk_end = 0 # number + +# The maximum consecutive newlines within a block of variable definitions +# 0 = No change (default) +nl_var_def_blk_in = 0 # number + +# Add or remove newline between a function call's ')' and '{', as in: +# list_for_each(item, &list) { } +nl_fcall_brace = add # ignore/add/remove/force + +# Add or remove newline between 'enum' and '{' +nl_enum_brace = force # ignore/add/remove/force + +# Add or remove newline between 'struct and '{' +nl_struct_brace = force # ignore/add/remove/force + +# Add or remove newline between 'union' and '{' +nl_union_brace = force # ignore/add/remove/force + +# Add or remove newline between 'if' and '{' +nl_if_brace = add # ignore/add/remove/force + +# Add or remove newline between '}' and 'else' +nl_brace_else = add # ignore/add/remove/force + +# Add or remove newline between 'else' and '{' +nl_else_brace = add # ignore/add/remove/force + +# Add or remove newline between get/set and '{' +nl_getset_brace = force # ignore/add/remove/force + +# Add or remove newline between 'for' and '{' +nl_for_brace = add # ignore/add/remove/force + +# Add or remove newline between 'while' and '{' +nl_while_brace = add # ignore/add/remove/force + +# Add or remove newline between 'do' and '{' +nl_do_brace = add # ignore/add/remove/force + +# Add or remove newline between '}' and 'while' of 'do' statement +nl_brace_while = remove # ignore/add/remove/force + +# Add or remove newline between 'switch' and '{' +nl_switch_brace = add # ignore/add/remove/force + +# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc. +# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace. +nl_multi_line_cond = false # false/true + +# Force a newline in a define after the macro name for multi-line defines. +nl_multi_line_define = true # false/true + +# Whether to put a newline before 'case' statement +nl_before_case = true # false/true + +# Whether to put a newline after 'case' statement +nl_after_case = true # false/true + +# Add or remove newline between a function name and the opening '(' +nl_func_paren = remove # ignore/add/remove/force + +# Whether to put each OC message parameter on a separate line +# See nl_oc_msg_leave_one_liner +nl_oc_msg_args = false # false/true + +# Add or remove newline between function signature and '{' +nl_fdef_brace = add # ignore/add/remove/force + +# Whether to put a newline after semicolons, except in 'for' statements +nl_after_semicolon = true # false/true + +# Whether to put a newline after brace open. +nl_after_brace_open = true # false/true + +# If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is +# placed between the open brace and a trailing single-line comment. +nl_after_brace_open_cmt = false # false/true + +# Whether to put a newline after a virtual brace open with a non-empty body. +# These occur in un-braced if/while/do/for statement bodies. +nl_after_vbrace_open = false # false/true + +# Whether to put a newline after a virtual brace open with an empty body. +# These occur in un-braced if/while/do/for statement bodies. +nl_after_vbrace_open_empty = false # false/true + +# Whether to put a newline after a brace close. +# Does not apply if followed by a necessary ';'. +nl_after_brace_close = true # false/true + +# Whether to put a newline after a virtual brace close. +# Would add a newline before return in: 'if (foo) a++; return;' +nl_after_vbrace_close = false # false/true + +# Whether to alter newlines in '#define' macros +nl_define_macro = false # false/true + +# Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'. Does not affect the whole-file #ifdef. +nl_squeeze_ifdef = true # false/true + +# Whether to double-space commented-entries in struct/enum +nl_ds_struct_enum_cmt = false # false/true + +# Whether to double-space before the close brace of a struct/union/enum +# (lower priority than 'eat_blanks_before_close_brace') +nl_ds_struct_enum_close_brace = false # false/true + +# Change simple unbraced if statements into a one-liner +# 'if(b)\n i++;' => 'if(b) i++;' +nl_create_if_one_liner = false # false/true + +# Change simple unbraced for statements into a one-liner +# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);' +nl_create_for_one_liner = false # false/true + +# Change simple unbraced while statements into a one-liner +# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);' +nl_create_while_one_liner = false # false/true + +# +# Positioning options +# + +# The position of boolean operators in wrapped expressions +pos_bool = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force + +# +# Line Splitting options +# + +# Try to limit code width to N number of columns +code_width = 0 # number + +# Whether to fully split long 'for' statements at semi-colons +ls_for_split_full = false # false/true + +# Whether to fully split long function protos/calls at commas +ls_func_split_full = false # false/true + +# Whether to split lines as close to code_width as possible and ignore some groupings +ls_code_width = false # false/true + +# +# Blank line options +# + +# The maximum consecutive newlines +nl_max = 4 # number + +# The number of newlines after a function prototype, if followed by another function prototype +nl_after_func_proto = 0 # number + +# The number of newlines after a function prototype, if not followed by another function prototype +nl_after_func_proto_group = 2 # number + +# The number of newlines after '}' of a multi-line function body +nl_after_func_body = 3 # number + +# The number of newlines after '}' of a multi-line function body in a class declaration +nl_after_func_body_class = 2 # number + +# The number of newlines after '}' of a single line function body +nl_after_func_body_one_liner = 0 # number + +# The minimum number of newlines before a multi-line comment. +# Doesn't apply if after a brace open or another multi-line comment. +nl_before_block_comment = 2 # number + +# The minimum number of newlines before a single-line C comment. +# Doesn't apply if after a brace open or other single-line C comments. +nl_before_c_comment = 0 # number + +# The minimum number of newlines before a CPP comment. +# Doesn't apply if after a brace open or other CPP comments. +nl_before_cpp_comment = 0 # number + +# Whether to force a newline after a multi-line comment. +nl_after_multiline_comment = false # false/true + +# Whether to force a newline after a label's colon. +nl_after_label_colon = false # false/true + +# The number of newlines after '}' or ';' of a struct/enum/union definition +nl_after_struct = 0 # number + +# The number of newlines after '}' or ';' of a class definition +nl_after_class = 0 # number + +# The number of newlines after '}' of a namespace +nl_after_namespace = 0 # number + +# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label. +# Will not change the newline count if after a brace open. +# 0 = No change. +nl_before_access_spec = 0 # number + +# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label. +# 0 = No change. +nl_after_access_spec = 0 # number + +# The number of newlines between a function def and the function comment. +# 0 = No change. +nl_comment_func_def = 1 # number + +# The number of newlines after a try-catch-finally block that isn't followed by a brace close. +# 0 = No change. +nl_after_try_catch_finally = 0 # number + +# The number of newlines before and after a property, indexer or event decl. +# 0 = No change. +nl_around_cs_property = 0 # number + +# The number of newlines between the get/set/add/remove handlers in C#. +# 0 = No change. +nl_between_get_set = 0 # number + +# Whether to remove blank lines after '{' +eat_blanks_after_open_brace = true # false/true + +# Whether to remove blank lines before '}' +eat_blanks_before_close_brace = true # false/true + +# How aggressively to remove extra newlines not in preproc. +# 0: No change +# 1: Remove most newlines not handled by other config +# 2: Remove all newlines and reformat completely by config +nl_remove_extra_newlines = 0 # number + +# Whether to put a blank line before 'return' statements, unless after an open brace. +nl_before_return = false # false/true + +# Whether to put a blank line after 'return' statements, unless followed by a close brace. +nl_after_return = true # false/true + +# +# Code modifying options (non-whitespace) +# + +# Add or remove braces on single-line 'do' statement +mod_full_brace_do = add # ignore/add/remove/force + +# Add or remove braces on single-line 'for' statement +mod_full_brace_for = add # ignore/add/remove/force + +# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'. +mod_full_brace_if = add # ignore/add/remove/force + +# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if. +# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed. +mod_full_brace_if_chain = 0 # unsigned number + +# Don't remove braces around statements that span N newlines +mod_full_brace_nl = 0 # number + +# Add or remove braces on single-line 'while' statement +mod_full_brace_while = add # ignore/add/remove/force + +# Whether to change optional semicolons to real semicolons +mod_pawn_semicolon = false # false/true + +# Add parens on 'while' and 'if' statement around bools +mod_full_paren_if_bool = true # false/true + +# Whether to remove superfluous semicolons +mod_remove_extra_semicolon = true # false/true + +# If a function body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_function_closebrace_comment = 0 # number + +# If a namespace body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_namespace_closebrace_comment = 0 # number + +# If a switch body exceeds the specified number of newlines and doesn't have a comment after +# the close brace, a comment will be added. +mod_add_long_switch_closebrace_comment = 0 # number + +# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after +# the #endif, a comment will be added. +mod_add_long_ifdef_endif_comment = 0 # number + +# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after +# the #else, a comment will be added. +mod_add_long_ifdef_else_comment = 0 # number + +# If TRUE, will sort consecutive single-line 'import' statements [Java, D] +mod_sort_import = false # false/true + +# If TRUE, will sort consecutive single-line 'using' statements [C#] +mod_sort_using = false # false/true + +# If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C] +# This is generally a bad idea, as it may break your code. +mod_sort_include = false # false/true + +# If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace. +mod_move_case_break = false # false/true + +# Will add or remove the braces around a fully braced case statement. +# Will only remove the braces if there are no variable declarations in the block. +mod_case_brace = remove # ignore/add/remove/force + +# If TRUE, it will remove a void 'return;' that appears as the last statement in a function. +mod_remove_empty_return = true # false/true + +# +# Comment modifications +# + +# Try to wrap comments at cmt_width columns +cmt_width = 0 # number + +# Set the comment reflow mode (default: 0) +# 0: no reflowing (apart from the line wrapping due to cmt_width) +# 1: no touching at all +# 2: full reflow +cmt_reflow_mode = 0 # number + +# Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting. +cmt_convert_tab_to_spaces = false # false/true + +# If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars. +# Default is true. +cmt_indent_multi = true # false/true + +# Whether to group c-comments that look like they are in a block +cmt_c_group = false # false/true + +# Whether to put an empty '/*' on the first line of the combined c-comment +cmt_c_nl_start = false # false/true + +# Whether to put a newline before the closing '*/' of the combined c-comment +cmt_c_nl_end = false # false/true + +# Whether to group cpp-comments that look like they are in a block +cmt_cpp_group = false # false/true + +# Whether to put an empty '/*' on the first line of the combined cpp-comment +cmt_cpp_nl_start = false # false/true + +# Whether to put a newline before the closing '*/' of the combined cpp-comment +cmt_cpp_nl_end = false # false/true + +# Whether to change cpp-comments into c-comments +cmt_cpp_to_c = false # false/true + +# Whether to put a star on subsequent comment lines +cmt_star_cont = true # false/true + +# The number of spaces to insert at the start of subsequent comment lines +cmt_sp_before_star_cont = 0 # number + +# The number of spaces to insert after the star on subsequent comment lines +cmt_sp_after_star_cont = 0 # number + +# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of +# the comment are the same length. Default=True +cmt_multi_check_last = true # false/true + +# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment. +# Will substitute $(filename) with the current file's name. +cmt_insert_file_header = "" # string + +# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment. +# Will substitute $(filename) with the current file's name. +cmt_insert_file_footer = "" # string + +# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment. +# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff. +# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... } +cmt_insert_func_header = "" # string + +# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment. +# Will substitute $(class) with the class name. +cmt_insert_class_header = "" # string + +# The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment. +# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff. +cmt_insert_oc_msg_header = "" # string + +# If a preprocessor is encountered when stepping backwards from a function name, then +# this option decides whether the comment should be inserted. +# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header. +cmt_insert_before_preproc = false # false/true + +# +# Preprocessor options +# + +# Control indent of preprocessors inside #if blocks at brace level 0 (file-level) +pp_indent = remove # ignore/add/remove/force + +# Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false) +pp_indent_at_level = false # false/true + +# Whether to indent #if/#else/#endif at the parenthesis level if the brace +# level is 0. If false, these are indented from column 1. +pp_indent_at_level0 = false # false/true + +# Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level). +# If pp_indent_at_level=false, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level). +# Default=1. +pp_indent_count = 1 # number + +# Sets the number of spaces added with pp_space_after +pp_space_count = 0 # number + +# The indent for #region and #endregion in C# and '#pragma region' in C/C++ +pp_indent_region = 0 # number + +# Whether to indent the code between #region and #endregion +pp_region_indent_code = false # false/true + +# If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level. +# 0: indent preprocessors using output_tab_size. +# >0: column at which all preprocessors will be indented. +pp_indent_if = 0 # number + +# Control whether to indent the code between #if, #else and #endif. +pp_if_indent_code = false # false/true + +# Whether to indent '#define' at the brace level (true) or from column 1 (false) +pp_define_at_level = false # false/true + +# +# Use or Do not Use options +# + +# True: indent_func_call_param will be used +# False: indent_func_call_param will NOT be used +use_indent_func_call_param = true # false/true + +# True: indent_continue will be used only once +# False: indent_continue will be used every time (default) +use_indent_continue_only_once = false # false/true + +# You can force a token to be a type with the 'type' option. +# Example: +# type myfoo1 myfoo2 +# +# You can create custom macro-based indentation using macro-open, +# macro-else and macro-close. +# Example: +# macro-open BEGIN_TEMPLATE_MESSAGE_MAP +# macro-open BEGIN_MESSAGE_MAP +# macro-close END_MESSAGE_MAP +# +# You can assign any keyword to any type with the set option. +# set func_call_user _ N_ +# +# The full syntax description of all custom definition config entries +# is shown below: +# +# define custom tokens as: +# - embed whitespace in token using '' escape character, or +# put token in quotes +# - these: ' " and ` are recognized as quote delimiters +# +# type token1 token2 token3 ... +# ^ optionally specify multiple tokens on a single line +# define def_token output_token +# ^ output_token is optional, then NULL is assumed +# macro-open token +# macro-close token +# macro-else token +# set id token1 token2 ... +# ^ optionally specify multiple tokens on a single line +# ^ id is one of the names in token_enum.h sans the CT_ prefix, +# e.g. PP_PRAGMA +# +# all tokens are separated by any mix of ',' commas, '=' equal signs +# and whitespace (space, tab) +# +# You can add support for other file extensions using the 'file_ext' command. +# The first arg is the language name used with the '-l' option. +# The remaining args are file extensions, matched with 'endswith'. +# file_ext CPP .ch .cxx .cpp.in +# |