diff options
Diffstat (limited to 'koffice-i18n-lv')
| -rwxr-xr-x | koffice-i18n-lv/install-sh | 394 | ||||
| -rwxr-xr-x | koffice-i18n-lv/missing | 346 | ||||
| -rwxr-xr-x | koffice-i18n-lv/mkinstalldirs | 149 |
3 files changed, 0 insertions, 889 deletions
diff --git a/koffice-i18n-lv/install-sh b/koffice-i18n-lv/install-sh deleted file mode 100755 index ca9c7c4c..00000000 --- a/koffice-i18n-lv/install-sh +++ /dev/null @@ -1,394 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2005-11-07.23 - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -posix_glob= -posix_mkdir= - -# Symbolic mode for testing mkdir with directories. -# It is the same as 755, but also tests that "u+" works. -test_mode=u=rwx,g=rx,o=rx,u+wx - -# Desired mode of installed file. -mode=0755 - -# Desired mode of newly created intermediate directories. -# It is empty if not known yet. -intermediate_mode= - -chmodcmd=$chmodprog -chowncmd= -chgrpcmd= -stripcmd= -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src= -dst= -dir_arg= -dstarg= -no_target_directory= - -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG -" - -while test -n "$1"; do - case $1 in - -c) shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; - - --version) echo "$0 $scriptversion"; exit $?;; - - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done - break;; - esac -done - -if test -z "$1"; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15 - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src ;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dstarg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dstarg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - posix_mkdir=false - if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then - posix_mkdir=true - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null - fi ;; - esac - - if - $posix_mkdir && { - - # With -d, create the new directory with the user-specified mode. - # Otherwise, create it using the same intermediate mode that - # mkdir -p would use when creating intermediate directories. - # POSIX says that this mode is "$(umask -S),u+wx", so use that - # if umask -S works. - - if test -n "$dir_arg"; then - mkdir_mode=$mode - else - case $intermediate_mode in - '') - if umask_S=`(umask -S) 2>/dev/null`; then - intermediate_mode=$umask_S,u+wx - else - intermediate_mode=$test_mode - fi ;; - esac - mkdir_mode=$intermediate_mode - fi - - $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" - } - then : - else - - # mkdir does not conform to POSIX, or it failed possibly due to - # a race condition. Create the directory the slow way, step by - # step, checking for races as we go. - - case $dstdir in - /*) pathcomp=/ ;; - -*) pathcomp=./ ;; - *) pathcomp= ;; - esac - - case $posix_glob in - '') - if (set -f) 2>/dev/null; then - posix_glob=true - else - posix_glob=false - fi ;; - esac - - oIFS=$IFS - IFS=/ - $posix_glob && set -f - set fnord $dstdir - shift - $posix_glob && set +f - IFS=$oIFS - - for d - do - test "x$d" = x && continue - - pathcomp=$pathcomp$d - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # Don't fail if two instances are running concurrently. - test -d "$pathcomp" || exit 1 - fi - pathcomp=$pathcomp/ - done - obsolete_mkdir_used=true - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dst"; then - $doit $rmcmd -f "$dst" 2>/dev/null \ - || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ - && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ - || { - echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - } || exit 1 - - trap '' 0 - fi -done diff --git a/koffice-i18n-lv/missing b/koffice-i18n-lv/missing deleted file mode 100755 index d55d3ad4..00000000 --- a/koffice-i18n-lv/missing +++ /dev/null @@ -1,346 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2004-09-07.08 - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004 -# Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case "$1" in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Send bug reports to <bug-automake@gnu.org>." - exit 0 - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit 0 - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case "$f" in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` - fi - touch $file - ;; - - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 diff --git a/koffice-i18n-lv/mkinstalldirs b/koffice-i18n-lv/mkinstalldirs deleted file mode 100755 index 6ac3d96b..00000000 --- a/koffice-i18n-lv/mkinstalldirs +++ /dev/null @@ -1,149 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy - -scriptversion=2005-06-29.22 - -# Original author: Noah Friedman <friedman@prep.ai.mit.edu> -# Created: 1993-05-16 -# Public domain. -# -# This file is maintained in Automake, please report -# bugs to <bug-automake@gnu.org> or send patches to -# <automake-patches@gnu.org>. - -errstatus=0 -dirmode= - -usage="\ -Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... - -Create each directory DIR (with mode MODE, if specified), including all -leading file name components. - -Report bugs to <bug-automake@gnu.org>." - -# process command line arguments -while test $# -gt 0 ; do - case $1 in - -h | --help | --h*) # -h for help - echo "$usage" - exit $? - ;; - -m) # -m PERM arg - shift - test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } - dirmode=$1 - shift - ;; - --version) - echo "$0 $scriptversion" - exit $? - ;; - --) # stop option processing - shift - break - ;; - -*) # unknown option - echo "$usage" 1>&2 - exit 1 - ;; - *) # first non-opt arg - break - ;; - esac -done - -for file -do - if test -d "$file"; then - shift - else - break - fi -done - -case $# in - 0) exit 0 ;; -esac - -# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and -# mkdir -p a/c at the same time, both will detect that a is missing, -# one will create a, then the other will try to create a and die with -# a "File exists" error. This is a problem when calling mkinstalldirs -# from a parallel make. We use --version in the probe to restrict -# ourselves to GNU mkdir, which is thread-safe. -case $dirmode in - '') - if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - test -d ./-p && rmdir ./-p - test -d ./--version && rmdir ./--version - fi - ;; - *) - if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && - test ! -d ./--version; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - else - # Clean up after NextStep and OpenStep mkdir. - for d in ./-m ./-p ./--version "./$dirmode"; - do - test -d $d && rmdir $d - done - fi - ;; -esac - -for file -do - case $file in - /*) pathcomp=/ ;; - *) pathcomp= ;; - esac - oIFS=$IFS - IFS=/ - set fnord $file - shift - IFS=$oIFS - - for d - do - test "x$d" = x && continue - - pathcomp=$pathcomp$d - case $pathcomp in - -*) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" - lasterr= - chmod "$dirmode" "$pathcomp" || lasterr=$? - - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi - - pathcomp=$pathcomp/ - done -done - -exit $errstatus |