Replace Qt with TQt

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

12 files changed, 60 insertions, 106 deletions

diff --git a/doc/en/credits.docbook b/doc/en/credits.docbook
index 9c730ec..95ac1c8 100644
--- a/doc/en/credits.docbook
+++ b/doc/en/credits.docbook
@@ -75,8 +75,8 @@
       <email>matej.urban@gmail.com</email></para>
     </listitem>
   </itemizedlist>The project is written using 
-  <application>KDevelop</application>and 
-  <application>&Qt; Designer</application>.</para>
+  <application>TDevelop</application>and 
+  <application>&TQt; Designer</application>.</para>
   <para>We would especially like to thank Dirk Eschler the
   &krusader; web master. If you visit the
   &kruwebsite-url; you'll appreciate the hard work and
diff --git a/doc/en/faq.docbook b/doc/en/faq.docbook
index 929cd7e..023ef70 100644
--- a/doc/en/faq.docbook
+++ b/doc/en/faq.docbook
@@ -66,7 +66,7 @@
           is &kde;, because it relies on services
           provided by the &kde; base libraries. Only
           some shared libraries are needed &eg;
-          &kde; libraries, &Qt; libraries,
+          &kde; libraries, &TQt; libraries,
           &etc; This means that &krusader;
           runs on &gnome-url;,
           &afterstep-url;, &xfce-url; and
@@ -483,8 +483,8 @@
         </answer>
       </qandaentry>
       <qandaentry>
-        <question id="faqi_deb-qt">
-          <para>&debian; complains about &Qt;
+        <question id="faqi_deb-tqt">
+          <para>&debian; complains about &TQt;
           when running 
           <command>./configure</command>, what's wrong?</para>
         </question>
@@ -499,9 +499,9 @@
           <prompt>$</prompt> <userinput><command>export</command> CPP=<replaceable>/usr/bin/cpp-3.2</replaceable></userinput>
           </screen> 
           For more information please take a look
-          &debian-qt-a-url; and at the
-          &debian-qt-b-url; on how to build a
-          &Qt;/&kde;3 application on
+          &debian-tqt-a-url; and at the
+          &debian-tqt-b-url; on how to build a
+          &TQt;/&tde; application on
           &debian;.</para>
           <para></para>
           <!-- Empty line to make it more readable -->
@@ -518,7 +518,7 @@
           <para>This problem occurs when you use the
           &nvidia; installer and not the official
           &nvidia; packages of your distribution.
-          &krusader; is based on &Qt; which
+          &krusader; is based on &TQt; which
           can be linked against the X OpenGL libraries. As a result
           &krusader; may look for OpenGL as well. The
           problem is that the &nvidia; installer (prior
@@ -741,35 +741,6 @@
     <title>Usage &FAQ;</title>
     <qandaset>
       <qandaentry>
-        <question id="faqu_qt355">
-          <para>&krusader; keeps crashing, why?</para>
-        </question>
-        <answer>
-          <para>We've been receiving a lot of emails and bug
-          reports (December 2005) regarding random crashes,
-          especially during file operations such as copy, move,
-          etc. 
-          <emphasis role="bold">These crashes are related to
-          &Qt; 3.3.5 and NOT
-          &krusader;.</emphasis> It seems that
-          &Qt; 3.3.5 introduced a serious bug which is
-          currently (December 2005) causing random crashes in many
-          &kde; applications including
-          &konqueror;. You can use Google to find out
-          more. As far as we know, &debian;-Sid and
-          &SuSE; already posted new &Qt;
-          binaries that fix the problem, and &gentoo;
-          has masked &Qt; 3.3.5 completely. As for now,
-          you either need &Qt; 3.3.4 or a fixed
-          &Qt; 3.3.5 or a higer version, depending on
-          your distribution. More information is available on our 
-          <ulink url="http://krusader.sourceforge.net/phpBB/viewtopic.php?t=1407">
-          website</ulink>.</para>
-          <para></para>
-          <!-- Empty line to make it more readable -->
-        </answer>
-      </qandaentry>
-      <qandaentry>
         <question id="faqu_supermount">
           <para>When I try to mount/unmount my cdrom/floppy,
           &krusader; reports something about a
@@ -824,9 +795,9 @@
           using a multi-threaded design - this way if we get stuck,
           we don't hang the entire application event loop, but we
           don't think that the time is right for adding threads, we
-          are not sure that *all* the &kde; systems out
-          there are using &Qt;-mt (the multi threaded
-          version of the &Qt; library), and the Krusader
+          are not sure that *all* the &tde; systems out
+          there are using &TQt;-mt (the multi threaded
+          version of the &TQt; library), and the Krusader
           Krew may not be the right people to address this major
           issue in any case; so currently this is just a bug we
           have to learn to live with.</para>
diff --git a/doc/en/help.docbook b/doc/en/help.docbook
index a3b6ee4..00c2ded 100644
--- a/doc/en/help.docbook
+++ b/doc/en/help.docbook
@@ -130,8 +130,8 @@
     <emphasis role="bold">Porting &krusader; to
     &Windows;</emphasis>
   </para>
-  <para>&krusader; is written using &Qt; as
-  well as &kde;libs. As long as &kde;libs
+  <para>&krusader; is written using &TQt; as
+  well as &tde;libs. As long as &tde;libs
   does not run on &Windows;, porting
   &krusader; is not an option. However, we do believe
   that once &Qt;4-GPL is released, efforts will be made
diff --git a/doc/en/index.docbook b/doc/en/index.docbook
index ff34ad5..050ce52 100644
--- a/doc/en/index.docbook
+++ b/doc/en/index.docbook
@@ -172,8 +172,8 @@ http://groups.google.com/group/krusader-devel/browse_thread/thread/d102adec2edcf
 <!ENTITY afterstep-url '<ulink url="http://www.afterstep.org/"><application>AfterStep</application></ulink>'>
 <!ENTITY xfce-url '<ulink url="http://www.xfce.org/"><application>XFce</application></ulink>'>
 
-<!ENTITY debian-qt-a-url '<ulink url="http://www.krusader.org/phpBB/viewtopic.php?t=710">in our forum</ulink>'>
-<!ENTITY debian-qt-b-url '<ulink url="http://opendoorsoftware.com/cgi/http.pl?p=DebianQTChecklist">instructions</ulink>'>
+<!ENTITY debian-tqt-a-url '<ulink url="http://www.krusader.org/phpBB/viewtopic.php?t=710">in our forum</ulink>'>
+<!ENTITY debian-tqt-b-url '<ulink url="http://opendoorsoftware.com/cgi/http.pl?p=DebianQTChecklist">instructions</ulink>'>
 <!ENTITY freenode-url '<ulink url="http://freenode.net">freenode.org</ulink>'>
 <!ENTITY fink-url '<ulink url="http://www.finkproject.org/">fink</ulink>'>
 <!ENTITY kjsembed-url '<ulink url="http://xmelegance.org/kjsembed/">KJSEmbed</ulink>'>
diff --git a/doc/en/installation.docbook b/doc/en/installation.docbook
index 8a813c2..b565ceb 100644
--- a/doc/en/installation.docbook
+++ b/doc/en/installation.docbook
@@ -598,17 +598,17 @@ Please don't use the <filename>/usr/local</filename> directory as it simply won'
           <envar>TQTDIR</envar>and 
           <envar>TDEDIR</envar>. &krusader;'s 
           <command>./configure</command> script needs to know where
-          the &Qt; and &kde; directories
+          the &TQt; and &tde; directories
           are.</para>
           <para>
           <envar>TQTDIR</envar>: 
-          <replaceable>&lt;path to your Qt
+          <replaceable>&lt;path to your TQt
           installation&gt;</replaceable> &eg; 
-          <filename>/usr/lib/qt3</filename> or 
-          <filename>/usr/qt3</filename></para>
+          <filename>/usr/lib/tqt3</filename> or 
+          <filename>/usr/tqt3</filename></para>
           <para>
           <envar>TDEDIR</envar>: 
-          <replaceable>&lt;path to your KDE
+          <replaceable>&lt;path to your TDE
           installation&gt;</replaceable> &eg; 
           <filename>/usr</filename> or 
           <filename>/opt/trinity</filename></para>
@@ -648,7 +648,7 @@ Please don't use the <filename>/usr/local</filename> directory as it simply won'
             lifetime of your current shell. When you close your
             terminal and open a new one they will be gone. Assuming
             &krusader; is not the only
-            &Qt;/&kde; program you want to
+            &TQt;/&tde; program you want to
             compile, we recommend to make these settings permanent
             (&eg; append both export commands to your 
             <filename class="directory">/etc/profile</filename>)
@@ -1127,7 +1127,7 @@ make[1]: Leaving directory `/home/source/krusader_trinity'
     <screen><prompt>$</prompt> <userinput><command>krusader</command><replaceable>--profile &lt;panel-profile&gt;</replaceable></userinput></screen>
     <screen><prompt>$</prompt> <userinput><command>krusader</command> <replaceable>--profile ftp-managment</replaceable></userinput></screen>
     </para>
-    <para>The standard &Qt; and &kde;
+    <para>The standard &TQt; and &tde;
     command-line options are available, and can be listed by
     entering 
     <userinput>
@@ -1138,21 +1138,21 @@ make[1]: Leaving directory `/home/source/krusader_trinity'
       <title>Other command-line options:</title>
       <varlistentry>
         <term>
-          <option>--help-qt</option>
+          <option>--help-tqt</option>
         </term>
         <listitem>
           <para>
-            <action>List Qt-specific options</action>
+            <action>List TQt-specific options</action>
           </para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term>
-          <option>--help-kde</option>
+          <option>--help-tde</option>
         </term>
         <listitem>
           <para>
-            <action>List KDE-specific options</action>
+            <action>List TDE-specific options</action>
           </para>
         </listitem>
       </varlistentry>
@@ -1247,4 +1247,4 @@ make[1]: Leaving directory `/home/source/krusader_trinity'
 </para>
 
  </sect1>
-</chapter>
\ No newline at end of file
+</chapter>
diff --git a/doc/en/java.docbook b/doc/en/java.docbook
index fd2d03d..cc3b975 100644
--- a/doc/en/java.docbook
+++ b/doc/en/java.docbook
@@ -45,7 +45,7 @@
     located but the current dir of the active Panel of Krusader.
     This needs to stay like this. However, for referencing
     additional files like .ui (Userinterface, exported by
-    &Qt;'s Designer) one needs the path of the script.
+    &TQt;'s Designer) one needs the path of the script.
     The alternative where absolute paths are used is more than
     unhandy. For this reason the Variable "scriptDir" was
     introduced. If a Script wants to load a &GUI; from a
@@ -79,9 +79,9 @@
     &kjsembed-url;. Some examples which show the power
     of this library can be found
     <ulink url="http://xmelegance.org/kjsembed/examples/index.html">
-    here</ulink>. Support for all of KDE's ground-laying technologies
+    here</ulink>. Support for all of TDE's ground-laying technologies
     such as DCOP or KParts is provided. You can even load whole
-    GUIs from .ui-files, created with &Qt;'s Designer.
+    GUIs from .ui-files, created with &TQt;'s Designer.
     An example extension making use of this can be found 
     <ulink url="http://www.krusader.org/phpBB/viewtopic.php?p=4832#4832">
     here</ulink>.</para>
diff --git a/doc/krusader.1 b/doc/krusader.1
index 6e0e5f2..2d129e3 100644
--- a/doc/krusader.1
+++ b/doc/krusader.1
@@ -1,11 +1,11 @@
 .TH krusader 1 "08 May 2006" Linux "Krusader Manpage"
 .SH "NAME"
-krusader \- advanced twin-panel file manager and ftp client for KDE
+krusader \- advanced twin-panel file manager and ftp client for TDE
 .SH "USAGE"
-.B krusader [Qt-options] [KDE-options] [options]
+.B krusader [TQt-options] [TDE-options] [options]
 .SH "DESCRIPTION"
 Krusader is an advanced twin panel (commander style)
-file manager for KDE and other desktops in the *nix world,
+file manager for TDE and other desktops in the *nix world,
 similar to Midnight or Total Commander.
 It provides all the file management features you could possibly want.
 Plus: extensive archive handling,
@@ -44,10 +44,10 @@ show the version
 .TP
 .B --license
 show the license
-.SH "[Qt-options]"
-"$ krusader --help-qt"  shows the all the Qt-options
-.SH "[KDE-options]"
-"$ krusader --help-kde" shows the all the KDE-options
+.SH "[TQt-options]"
+"$ krusader --help-tqt"  shows the all the TQt-options
+.SH "[TDE-options]"
+"$ krusader --help-kde" shows the all the TDE-options
 .SH "EXAMPLE"
 .B $ krusader --left=/mnt/cdrom --right=ftp://downloads@myserver.net
 .TP
@@ -169,7 +169,7 @@ Richard Holt, Documentation & Proofing [richard {.} holt {*} gmail {.} com]
 
 Matej Urbancic, Marketing & Product Research [matej {*} amis {.} net]
 
-The project is written using KDevelop and QT Designer.
+The project is written using TDevelop and TQt Designer.
 
 .SH "BUGS"
 See the TODO file in the distribution for information on what remains to be done.
diff --git a/doc/ru/credits.docbook b/doc/ru/credits.docbook
index 116e718..0d7c556 100644
--- a/doc/ru/credits.docbook
+++ b/doc/ru/credits.docbook
@@ -99,9 +99,9 @@
 > </listitem
 > </itemizedlist
 > The project is written using <application
->KDevelop</application
+>TDevelop</application
 > and <application
->&Qt; Designer</application
+>&TQt; Designer</application
 >. </para>
 
 <para
diff --git a/doc/ru/faq.docbook b/doc/ru/faq.docbook
index 4254ef0..bdd2233 100644
--- a/doc/ru/faq.docbook
+++ b/doc/ru/faq.docbook
@@ -73,7 +73,7 @@
    <para
 ><emphasis
 >Нет , &krusader; не нуждается в оконном менеджере &kde;</emphasis
-> для запуска на вашем компьютере , потому что он пользуется службам&eg; &kde;и базовой библиотеки &kde;Необходимы только некоторые разделяемые библиотеки например &kde; &Qt; , &etc;Этот способ в &krusader; , запущеном в &gnome_url;, &afterstep_url;, &xfce_url; и других оконных менеджерах реализуется за счет связанных с ними библиотек .Это не проблема и решается правильным соблюдением зависимостей при установке. </para>
+> для запуска на вашем компьютере , потому что он пользуется службам&eg; &kde;и базовой библиотеки &kde;Необходимы только некоторые разделяемые библиотеки например &kde; &TQt; , &etc;Этот способ в &krusader; , запущеном в &gnome_url;, &afterstep_url;, &xfce_url; и других оконных менеджерах реализуется за счет связанных с ними библиотек .Это не проблема и решается правильным соблюдением зависимостей при установке. </para>
            <!-- Empty line to make it more readable -->
    <para
 >Нет необходимости переключаться в &kde; для использования &krusader;; вы можете использовать &gnome_url;, &afterstep_url;, &xfce_url; или в других оконных менеджерах.Но настройка шрифтов и поведения &krusader; производится в <command
@@ -494,7 +494,7 @@
   <qandaentry>
   <question id="faqi_deb_qt">
   <para
->&debian; жалуется на &Qt; когда запускаю  <command
+>&debian; жалуется на &TQt; когда запускаю  <command
 >./configure</command
 ></para>
   </question>
@@ -528,7 +528,7 @@
 >/usr/bin/cpp-3.2</replaceable
 ></userinput>
 </screen
-> Для получения дополнительной информации посетите &debian_qt_a_url; и &debian_qt_b_url; чтобы узнать как собирать приложения &Qt;/&kde;3 в &debian;. </para>
+> Для получения дополнительной информации посетите &debian_qt_a_url; и &debian_qt_b_url; чтобы узнать как собирать приложения &TQt;/&tde; в &debian;. </para>
      <!-- Empty line to make it more readable -->
    </answer>
    </qandaentry>
@@ -542,7 +542,7 @@
   </question>
   <answer>
   <para
->Эта проблема связана с использованием установщика &nvidia;. &krusader; основан на &Qt; и связан с библиотеками X OpenGL . Проблема в том , что установщик &nvidia; ( до версии 7xxx) переписывает файлы заголовков OpenGL и не устанавливает правильные ссылки на библиотеки OpenGL. Лучшим решением будет использовать пакет с драйвером &nvidia; , который идет в дистрибутивной поставке.Если в некоторых случаях необходимо использовать старый драйвер единственное решение использовать нестандартное решение для старого драйвера(6111 в этом примере) , что-то вроде этого : <screen
+>Эта проблема связана с использованием установщика &nvidia;. &krusader; основан на &TQt; и связан с библиотеками X OpenGL . Проблема в том , что установщик &nvidia; ( до версии 7xxx) переписывает файлы заголовков OpenGL и не устанавливает правильные ссылки на библиотеки OpenGL. Лучшим решением будет использовать пакет с драйвером &nvidia; , который идет в дистрибутивной поставке.Если в некоторых случаях необходимо использовать старый драйвер единственное решение использовать нестандартное решение для старого драйвера(6111 в этом примере) , что-то вроде этого : <screen
 ><prompt>$</prompt> <userinput><command>ln</command> -s <replaceable>libGLcore.so.1.0.6111  libGLcore.so.0</replaceable></userinput>
 <prompt>$</prompt> <userinput><command>ln</command> -s <replaceable>libGLcore.so.1.0.6111  libGLcore.so</replaceable></userinput>
 <prompt>$</prompt> <userinput><command>ln</command> -s <replaceable>libGLcore.so.1.0.6111  libGLcore.so.1.0.0</replaceable></userinput>
@@ -762,23 +762,6 @@
 <qandaset>
 
   <qandaentry>
-  <question id="faqu_qt355">
-  <para
->Почему &krusader; падает ?</para>
-  </question>
-  <answer>
-  <para
->Мы получили много писем-отчетов(декабрь 2005) относительно различных проблем в &krusader;,особенно во время некоторых операций с файлами(копирование/перемещение и др.)<emphasis role="bold"
->Эти проблемы связаны с &Qt; 3.3.5 и &krusader; тут не виноват.</emphasis
->Это , возможно серьезная ошибка в &Qt; 3.3.5 и причина многочисленных сбоев в различных приложениях &kde; включая &konqueror;.В Google вы можете найти множеств подобных вопросов.В дальнейшем , насколько нам известно в &debian;-Sid и &SuSE; уже включена новая версия &Qt; с устраненной проблемой. Дополнительная информация на нашем <ulink url="http://krusader.sourceforge.net/phpBB/viewtopic.php?t=1407"
->сайте</ulink
->. </para>
-    <!-- Empty line to make it more readable -->
-  </answer>
-  </qandaentry>
-
-
-  <qandaentry>
   <question id="faqu_supermount">
   <para
 >Когда я пробую монтировать/отмонтировать мои cdrom/floppy, &krusader; говорит о supermount, что это такое ?</para>
@@ -815,7 +798,7 @@
 >kill -9</command
 >.Мы не имеем предложенных решений для решения проблемы.Эта проблема не связана с файловыми менеджерами или  самой ОС &Linux;!Проблема этого вашего "зависания" в первом обращении к отключенному ресурсу  - там нет возможности сделать проверку содержимого , осмотреть каталог и <command
 >ls</command
-> зависает.Это проблема многонитевой архитектуры и в самом приложении зависания нет.Мы не знаем где проблема , скорее всего это не &kde; он использует &Qt;-mt (многонитевая версия библиотеки) , и Krusader Krew не знает решения этой проблемы , в настоящее время мы просто смирились с этой проблемой. </para>
+> зависает.Это проблема многонитевой архитектуры и в самом приложении зависания нет.Мы не знаем где проблема , скорее всего это не &tde; он использует &TQt;-mt (многонитевая версия библиотеки) , и Krusader Krew не знает решения этой проблемы , в настоящее время мы просто смирились с этой проблемой. </para>
     <!-- Empty line to make it more readable -->
   </answer>
   </qandaentry>
diff --git a/doc/ru/help.docbook b/doc/ru/help.docbook
index 80777e3..4a6781d 100644
--- a/doc/ru/help.docbook
+++ b/doc/ru/help.docbook
@@ -112,7 +112,7 @@
 >Портирование &krusader; для &Windows;</emphasis
 ></para>
 <para
->&krusader; написан с использованием &Qt; и зависит от библиотек &kde;. Долгое время они были недоступны для портирования &krusader; под &Windows; - это не давало выбора. Однако , мы верим , с портированием библиотек &kde; на &Qt;4 под лицензией GPL попытки портирования завершатся успешно , мы будем в деле и нуждаемся в поддержке для портирования &krusader; под &Windows;.</para>
+>&krusader; написан с использованием &TQt; и зависит от библиотек &kde;. Долгое время они были недоступны для портирования &krusader; под &Windows; - это не давало выбора. Однако , мы верим , с портированием библиотек &kde; на &Qt;4 под лицензией GPL попытки портирования завершатся успешно , мы будем в деле и нуждаемся в поддержке для портирования &krusader; под &Windows;.</para>
 
 
 <para
diff --git a/doc/ru/installation.docbook b/doc/ru/installation.docbook
index 8981101..bd6f207 100644
--- a/doc/ru/installation.docbook
+++ b/doc/ru/installation.docbook
@@ -499,24 +499,24 @@
 >TDEDIR</envar
 >. &krusader;'s <command
 >./configure</command
-> script needs to know where the &Qt; and &kde; directories are. </para>
+> script needs to know where the &TQt; and &tde; directories are. </para>
 
 <para
 ><envar
 >TQTDIR</envar
 > : <replaceable
->&lt;path to your Qt installation&gt;</replaceable
+>&lt;path to your TQt installation&gt;</replaceable
 > &eg; <filename
->/usr/lib/qt3</filename
+>/usr/lib/tqt3</filename
 > or <filename
->/usr/qt3</filename
+>/usr/tqt3</filename
 ></para>
 
 <para
 ><envar
 >TDEDIR</envar
 > : <replaceable
->&lt;path to your KDE installation&gt;</replaceable
+>&lt;path to your TDE installation&gt;</replaceable
 > &eg; <filename
 >/usr</filename
 > or <filename
@@ -558,7 +558,7 @@
 
   <note
 ><para
->These enviroment variables are only set for the lifetime of your current shell. When you close your terminal and open a new one they will be gone. Assuming &krusader; is not the only &Qt;/&kde; program you want to compile, we recommend to make these settings permanent (&eg; append both export commands to your <filename class="directory"
+>These enviroment variables are only set for the lifetime of your current shell. When you close your terminal and open a new one they will be gone. Assuming &krusader; is not the only &TQt;/&tde; program you want to compile, we recommend to make these settings permanent (&eg; append both export commands to your <filename class="directory"
 >/etc/profile</filename
 >) file.</para
 ></note>
@@ -1068,7 +1068,7 @@ foo</screen>
 </para>
 
 <para
->The standard &Qt; and &kde; command-line options are available, and can be listed by entering <userinput
+>The standard &TQt; and &tde; command-line options are available, and can be listed by entering <userinput
 ><command
 >krusader</command
 > <option
@@ -1082,24 +1082,24 @@ foo</screen>
   <varlistentry>
     <term
 ><option
->--help-qt</option
+>--help-tqt</option
 ></term>
     <listitem
 ><para
 ><action
->List Qt-specific options</action
+>List TQt-specific options</action
 ></para
 ></listitem>
   </varlistentry>
   <varlistentry>
     <term
 ><option
->--help-kde</option
+>--help-tde</option
 ></term>
     <listitem
 ><para
 ><action
->List KDE-specific options</action
+>List TDE-specific options</action
 ></para
 ></listitem>
   </varlistentry>
diff --git a/doc/ru/krusader-tools.docbook b/doc/ru/krusader-tools.docbook
index 9292487..38739ed 100644
--- a/doc/ru/krusader-tools.docbook
+++ b/doc/ru/krusader-tools.docbook
@@ -4042,7 +4042,7 @@
 > that will be more explenatory.</para>
 
 <para
->When a script is executed, the script doesn't know it's origin (or maybe there is a way which that we don't know) and all relative path's are relative to the current working-dir. But this dir is (normaly) not the one where the script is located but the current dir of the active Panel of Krusader. This needs to stay like this. However, for referenceing additional files like .ui (Userinterface, exported by &Qt;'s Designer) one need the path of the script. The alternative where absolute path's but this is more then unhandy. For this reason the Variable "scriptDir" was introduced. If a Script want to load a &GUI; from a .ui-file this can be done this way: <emphasis
+>When a script is executed, the script doesn't know it's origin (or maybe there is a way which that we don't know) and all relative path's are relative to the current working-dir. But this dir is (normaly) not the one where the script is located but the current dir of the active Panel of Krusader. This needs to stay like this. However, for referenceing additional files like .ui (Userinterface, exported by &TQt;'s Designer) one need the path of the script. The alternative where absolute path's but this is more then unhandy. For this reason the Variable "scriptDir" was introduced. If a Script want to load a &GUI; from a .ui-file this can be done this way: <emphasis
 >var ui = Factory.loadui( scriptDir + 'filename.ui' );</emphasis
 > I recomend using Dialog as a base when designing &GUI;'s for using with JS. Execute the dialog with: <emphasis
 >ui.exec();</emphasis
@@ -4062,7 +4062,7 @@
 <para
 >The JavaScript-support is based on &kjsembed_url;. Some expamples which show the power of this library can be found on <ulink url="http://xmelegance.org/kjsembed/examples/index.html"
 ></ulink
->. Support for all of KDE's ground-laying technologies like DCOP or KParts is provided. You can even load whole GUI's from .ui-files, created with &Qt;'s Designer. An example extension making use of this can be found <ulink url="http://www.krusader.org/phpBB/viewtopic.php?p=4832#4832"
+>. Support for all of TDE's ground-laying technologies like DCOP or KParts is provided. You can even load whole GUI's from .ui-files, created with &TQt;'s Designer. An example extension making use of this can be found <ulink url="http://www.krusader.org/phpBB/viewtopic.php?p=4832#4832"
 >here</ulink
 >. </para>