diff options
135 files changed, 54909 insertions, 0 deletions
@@ -0,0 +1,3 @@ + +Look in the subdirs to get info about the authors. + @@ -0,0 +1,347 @@ +NOTE! The GPL below is copyrighted by the Free Software Foundation, but +the instance of code that it refers to (the kde programs) are copyrighted +by the authors who actually wrote it. + +--------------------------------------------------------------------------- + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/COPYING-DOCS b/COPYING-DOCS new file mode 100644 index 0000000..4a0fe1c --- /dev/null +++ b/COPYING-DOCS @@ -0,0 +1,397 @@ + GNU Free Documentation License + Version 1.2, November 2002 + + + Copyright (C) 2000,2001,2002 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + +0. PREAMBLE + +The purpose of this License is to make a manual, textbook, or other +functional and useful document "free" in the sense of freedom: to +assure everyone the effective freedom to copy and redistribute it, +with or without modifying it, either commercially or noncommercially. +Secondarily, this License preserves for the author and publisher a way +to get credit for their work, while not being considered responsible +for modifications made by others. + +This License is a kind of "copyleft", which means that derivative +works of the document must themselves be free in the same sense. It +complements the GNU General Public License, which is a copyleft +license designed for free software. + +We have designed this License in order to use it for manuals for free +software, because free software needs free documentation: a free +program should come with manuals providing the same freedoms that the +software does. But this License is not limited to software manuals; +it can be used for any textual work, regardless of subject matter or +whether it is published as a printed book. We recommend this License +principally for works whose purpose is instruction or reference. + + +1. APPLICABILITY AND DEFINITIONS + +This License applies to any manual or other work, in any medium, that +contains a notice placed by the copyright holder saying it can be +distributed under the terms of this License. Such a notice grants a +world-wide, royalty-free license, unlimited in duration, to use that +work under the conditions stated herein. The "Document", below, +refers to any such manual or work. Any member of the public is a +licensee, and is addressed as "you". You accept the license if you +copy, modify or distribute the work in a way requiring permission +under copyright law. + +A "Modified Version" of the Document means any work containing the +Document or a portion of it, either copied verbatim, or with +modifications and/or translated into another language. + +A "Secondary Section" is a named appendix or a front-matter section of +the Document that deals exclusively with the relationship of the +publishers or authors of the Document to the Document's overall subject +(or to related matters) and contains nothing that could fall directly +within that overall subject. (Thus, if the Document is in part a +textbook of mathematics, a Secondary Section may not explain any +mathematics.) The relationship could be a matter of historical +connection with the subject or with related matters, or of legal, +commercial, philosophical, ethical or political position regarding +them. + +The "Invariant Sections" are certain Secondary Sections whose titles +are designated, as being those of Invariant Sections, in the notice +that says that the Document is released under this License. If a +section does not fit the above definition of Secondary then it is not +allowed to be designated as Invariant. The Document may contain zero +Invariant Sections. If the Document does not identify any Invariant +Sections then there are none. + +The "Cover Texts" are certain short passages of text that are listed, +as Front-Cover Texts or Back-Cover Texts, in the notice that says that +the Document is released under this License. A Front-Cover Text may +be at most 5 words, and a Back-Cover Text may be at most 25 words. + +A "Transparent" copy of the Document means a machine-readable copy, +represented in a format whose specification is available to the +general public, that is suitable for revising the document +straightforwardly with generic text editors or (for images composed of +pixels) generic paint programs or (for drawings) some widely available +drawing editor, and that is suitable for input to text formatters or +for automatic translation to a variety of formats suitable for input +to text formatters. A copy made in an otherwise Transparent file +format whose markup, or absence of markup, has been arranged to thwart +or discourage subsequent modification by readers is not Transparent. +An image format is not Transparent if used for any substantial amount +of text. A copy that is not "Transparent" is called "Opaque". + +Examples of suitable formats for Transparent copies include plain +ASCII without markup, Texinfo input format, LaTeX input format, SGML +or XML using a publicly available DTD, and standard-conforming simple +HTML, PostScript or PDF designed for human modification. Examples of +transparent image formats include PNG, XCF and JPG. Opaque formats +include proprietary formats that can be read and edited only by +proprietary word processors, SGML or XML for which the DTD and/or +processing tools are not generally available, and the +machine-generated HTML, PostScript or PDF produced by some word +processors for output purposes only. + +The "Title Page" means, for a printed book, the title page itself, +plus such following pages as are needed to hold, legibly, the material +this License requires to appear in the title page. For works in +formats which do not have any title page as such, "Title Page" means +the text near the most prominent appearance of the work's title, +preceding the beginning of the body of the text. + +A section "Entitled XYZ" means a named subunit of the Document whose +title either is precisely XYZ or contains XYZ in parentheses following +text that translates XYZ in another language. (Here XYZ stands for a +specific section name mentioned below, such as "Acknowledgements", +"Dedications", "Endorsements", or "History".) To "Preserve the Title" +of such a section when you modify the Document means that it remains a +section "Entitled XYZ" according to this definition. + +The Document may include Warranty Disclaimers next to the notice which +states that this License applies to the Document. These Warranty +Disclaimers are considered to be included by reference in this +License, but only as regards disclaiming warranties: any other +implication that these Warranty Disclaimers may have is void and has +no effect on the meaning of this License. + + +2. VERBATIM COPYING + +You may copy and distribute the Document in any medium, either +commercially or noncommercially, provided that this License, the +copyright notices, and the license notice saying this License applies +to the Document are reproduced in all copies, and that you add no other +conditions whatsoever to those of this License. You may not use +technical measures to obstruct or control the reading or further +copying of the copies you make or distribute. However, you may accept +compensation in exchange for copies. If you distribute a large enough +number of copies you must also follow the conditions in section 3. + +You may also lend copies, under the same conditions stated above, and +you may publicly display copies. + + +3. COPYING IN QUANTITY + +If you publish printed copies (or copies in media that commonly have +printed covers) of the Document, numbering more than 100, and the +Document's license notice requires Cover Texts, you must enclose the +copies in covers that carry, clearly and legibly, all these Cover +Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on +the back cover. Both covers must also clearly and legibly identify +you as the publisher of these copies. The front cover must present +the full title with all words of the title equally prominent and +visible. You may add other material on the covers in addition. +Copying with changes limited to the covers, as long as they preserve +the title of the Document and satisfy these conditions, can be treated +as verbatim copying in other respects. + +If the required texts for either cover are too voluminous to fit +legibly, you should put the first ones listed (as many as fit +reasonably) on the actual cover, and continue the rest onto adjacent +pages. + +If you publish or distribute Opaque copies of the Document numbering +more than 100, you must either include a machine-readable Transparent +copy along with each Opaque copy, or state in or with each Opaque copy +a computer-network location from which the general network-using +public has access to download using public-standard network protocols +a complete Transparent copy of the Document, free of added material. +If you use the latter option, you must take reasonably prudent steps, +when you begin distribution of Opaque copies in quantity, to ensure +that this Transparent copy will remain thus accessible at the stated +location until at least one year after the last time you distribute an +Opaque copy (directly or through your agents or retailers) of that +edition to the public. + +It is requested, but not required, that you contact the authors of the +Document well before redistributing any large number of copies, to give +them a chance to provide you with an updated version of the Document. + + +4. MODIFICATIONS + +You may copy and distribute a Modified Version of the Document under +the conditions of sections 2 and 3 above, provided that you release +the Modified Version under precisely this License, with the Modified +Version filling the role of the Document, thus licensing distribution +and modification of the Modified Version to whoever possesses a copy +of it. In addition, you must do these things in the Modified Version: + +A. Use in the Title Page (and on the covers, if any) a title distinct + from that of the Document, and from those of previous versions + (which should, if there were any, be listed in the History section + of the Document). You may use the same title as a previous version + if the original publisher of that version gives permission. +B. List on the Title Page, as authors, one or more persons or entities + responsible for authorship of the modifications in the Modified + Version, together with at least five of the principal authors of the + Document (all of its principal authors, if it has fewer than five), + unless they release you from this requirement. +C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. +D. Preserve all the copyright notices of the Document. +E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. +F. Include, immediately after the copyright notices, a license notice + giving the public permission to use the Modified Version under the + terms of this License, in the form shown in the Addendum below. +G. Preserve in that license notice the full lists of Invariant Sections + and required Cover Texts given in the Document's license notice. +H. Include an unaltered copy of this License. +I. Preserve the section Entitled "History", Preserve its Title, and add + to it an item stating at least the title, year, new authors, and + publisher of the Modified Version as given on the Title Page. If + there is no section Entitled "History" in the Document, create one + stating the title, year, authors, and publisher of the Document as + given on its Title Page, then add an item describing the Modified + Version as stated in the previous sentence. +J. Preserve the network location, if any, given in the Document for + public access to a Transparent copy of the Document, and likewise + the network locations given in the Document for previous versions + it was based on. These may be placed in the "History" section. + You may omit a network location for a work that was published at + least four years before the Document itself, or if the original + publisher of the version it refers to gives permission. +K. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the section all + the substance and tone of each of the contributor acknowledgements + and/or dedications given therein. +L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section titles. +M. Delete any section Entitled "Endorsements". Such a section + may not be included in the Modified Version. +N. Do not retitle any existing section to be Entitled "Endorsements" + or to conflict in title with any Invariant Section. +O. Preserve any Warranty Disclaimers. + +If the Modified Version includes new front-matter sections or +appendices that qualify as Secondary Sections and contain no material +copied from the Document, you may at your option designate some or all +of these sections as invariant. To do this, add their titles to the +list of Invariant Sections in the Modified Version's license notice. +These titles must be distinct from any other section titles. + +You may add a section Entitled "Endorsements", provided it contains +nothing but endorsements of your Modified Version by various +parties--for example, statements of peer review or that the text has +been approved by an organization as the authoritative definition of a +standard. + +You may add a passage of up to five words as a Front-Cover Text, and a +passage of up to 25 words as a Back-Cover Text, to the end of the list +of Cover Texts in the Modified Version. Only one passage of +Front-Cover Text and one of Back-Cover Text may be added by (or +through arrangements made by) any one entity. If the Document already +includes a cover text for the same cover, previously added by you or +by arrangement made by the same entity you are acting on behalf of, +you may not add another; but you may replace the old one, on explicit +permission from the previous publisher that added the old one. + +The author(s) and publisher(s) of the Document do not by this License +give permission to use their names for publicity for or to assert or +imply endorsement of any Modified Version. + + +5. COMBINING DOCUMENTS + +You may combine the Document with other documents released under this +License, under the terms defined in section 4 above for modified +versions, provided that you include in the combination all of the +Invariant Sections of all of the original documents, unmodified, and +list them all as Invariant Sections of your combined work in its +license notice, and that you preserve all their Warranty Disclaimers. + +The combined work need only contain one copy of this License, and +multiple identical Invariant Sections may be replaced with a single +copy. If there are multiple Invariant Sections with the same name but +different contents, make the title of each such section unique by +adding at the end of it, in parentheses, the name of the original +author or publisher of that section if known, or else a unique number. +Make the same adjustment to the section titles in the list of +Invariant Sections in the license notice of the combined work. + +In the combination, you must combine any sections Entitled "History" +in the various original documents, forming one section Entitled +"History"; likewise combine any sections Entitled "Acknowledgements", +and any sections Entitled "Dedications". You must delete all sections +Entitled "Endorsements". + + +6. COLLECTIONS OF DOCUMENTS + +You may make a collection consisting of the Document and other documents +released under this License, and replace the individual copies of this +License in the various documents with a single copy that is included in +the collection, provided that you follow the rules of this License for +verbatim copying of each of the documents in all other respects. + +You may extract a single document from such a collection, and distribute +it individually under this License, provided you insert a copy of this +License into the extracted document, and follow this License in all +other respects regarding verbatim copying of that document. + + +7. AGGREGATION WITH INDEPENDENT WORKS + +A compilation of the Document or its derivatives with other separate +and independent documents or works, in or on a volume of a storage or +distribution medium, is called an "aggregate" if the copyright +resulting from the compilation is not used to limit the legal rights +of the compilation's users beyond what the individual works permit. +When the Document is included in an aggregate, this License does not +apply to the other works in the aggregate which are not themselves +derivative works of the Document. + +If the Cover Text requirement of section 3 is applicable to these +copies of the Document, then if the Document is less than one half of +the entire aggregate, the Document's Cover Texts may be placed on +covers that bracket the Document within the aggregate, or the +electronic equivalent of covers if the Document is in electronic form. +Otherwise they must appear on printed covers that bracket the whole +aggregate. + + +8. TRANSLATION + +Translation is considered a kind of modification, so you may +distribute translations of the Document under the terms of section 4. +Replacing Invariant Sections with translations requires special +permission from their copyright holders, but you may include +translations of some or all Invariant Sections in addition to the +original versions of these Invariant Sections. You may include a +translation of this License, and all the license notices in the +Document, and any Warranty Disclaimers, provided that you also include +the original English version of this License and the original versions +of those notices and disclaimers. In case of a disagreement between +the translation and the original version of this License or a notice +or disclaimer, the original version will prevail. + +If a section in the Document is Entitled "Acknowledgements", +"Dedications", or "History", the requirement (section 4) to Preserve +its Title (section 1) will typically require changing the actual +title. + + +9. TERMINATION + +You may not copy, modify, sublicense, or distribute the Document except +as expressly provided for under this License. Any other attempt to +copy, modify, sublicense or distribute the Document is void, and will +automatically terminate your rights under this License. However, +parties who have received copies, or rights, from you under this +License will not have their licenses terminated so long as such +parties remain in full compliance. + + +10. FUTURE REVISIONS OF THIS LICENSE + +The Free Software Foundation may publish new, revised versions +of the GNU Free Documentation License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. See +http://www.gnu.org/copyleft/. + +Each version of the License is given a distinguishing version number. +If the Document specifies that a particular numbered version of this +License "or any later version" applies to it, you have the option of +following the terms and conditions either of that specified version or +of any later version that has been published (not as a draft) by the +Free Software Foundation. If the Document does not specify a version +number of this License, you may choose any version ever published (not +as a draft) by the Free Software Foundation. + + +ADDENDUM: How to use this License for your documents + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + + Copyright (c) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.2 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. + A copy of the license is included in the section entitled "GNU + Free Documentation License". + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the "with...Texts." line with this: + + with the Invariant Sections being LIST THEIR TITLES, with the + Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, +to permit their use in free software. diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..5036ba5 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,17 @@ +1998-12-05 Alex Zepeda <garbanzo@hooked.net> + + * README: Use a "new" style README. + +1998-11-13 Alex Zepeda <garbanzo@hooked.net> + + * Makefile.cvs (all): Use an updated Makefile.cvs from kdenetwork that + tests for the admin directory. + + * configure.in.1: Remove comment about this being Alpha (quality) + software, and update version number (now it's at 1.1pre). Also, now + it uses the kde-common copy of the autoconf stuff. + +1998-11-08 Alex Zepeda <alex@zippy.dyn.ml.org> + + * Makefile.cvs (all): Use the kde-common version of automoc. + @@ -0,0 +1,176 @@ +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes a while. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/kde/bin', `/usr/local/kde/lib', etc. You can specify an +installation prefix other than `/usr/local/kde' by giving `configure' +the option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. + diff --git a/Mainpage.dox b/Mainpage.dox new file mode 100644 index 0000000..668e62f --- /dev/null +++ b/Mainpage.dox @@ -0,0 +1,16 @@ +/** + * @mainpage The KDE Graphics API Reference + * + * This section contains the KDE online class reference for the current + * development version of the KDE graphics package. + * + * - <a href="kviewshell/html/index.html"><b>kviewshell</b></a> + * (<a href="kviewshell/html/classes.html">classes</a>)\n + * <i>API for the implementation of kviewshell plugins.</i> + * + * More information about the KDE architecture in form of + * tutorials, HOWTOs, + * and FAQs can be found at + * the <a href="http://developer.kde.org">KDE Developer's corner</a>. + */ + diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..845938c --- /dev/null +++ b/Makefile.am @@ -0,0 +1,23 @@ +## kdegraphics/Makefile.am $Id: Makefile.am.in 571342 2006-08-09 10:30:55Z mueller $ +## (C) 1997 Stephan Kulow + +AUTOMAKE_OPTIONS = foreign 1.6.1 + +# COMPILE_BEFORE_kooka = libkscan +# COMPILE_BEFORE_kfaxview = kfax +# COMPILE_BEFORE_kfile-plugins = kghostview +# COMPILE_AFTER_kviewshell = kdvi kfaxview + +DISTCLEANFILES = inst-apps + +EXTRA_DIST = admin debian kdebase.spec.in README.pam kde.pamd + +dist-hook: + cd $(top_distdir) && perl $(top_srcdir)/admin/am_edit -padmin + +MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 SUBDIRS + +include admin/Doxyfile.am +include admin/deps.am + +SUBDIRS=$(TOPSUBDIRS) diff --git a/Makefile.am.in b/Makefile.am.in new file mode 100644 index 0000000..8b57158 --- /dev/null +++ b/Makefile.am.in @@ -0,0 +1,22 @@ +## kdegraphics/Makefile.am $Id: Makefile.am.in 571342 2006-08-09 10:30:55Z mueller $ +## (C) 1997 Stephan Kulow + +AUTOMAKE_OPTIONS = foreign 1.6.1 + +COMPILE_BEFORE_kooka = libkscan +COMPILE_BEFORE_kfaxview = kfax +COMPILE_BEFORE_kfile-plugins = kghostview +COMPILE_AFTER_kviewshell = kdvi kfaxview + +DISTCLEANFILES = inst-apps + +EXTRA_DIST = admin debian kdebase.spec.in README.pam kde.pamd + +dist-hook: + cd $(top_distdir) && perl $(top_srcdir)/admin/am_edit -padmin + +MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 SUBDIRS + +include admin/Doxyfile.am +include admin/deps.am + diff --git a/Makefile.cvs b/Makefile.cvs new file mode 100644 index 0000000..b4752bd --- /dev/null +++ b/Makefile.cvs @@ -0,0 +1,16 @@ + +all: + @echo "This Makefile is only for the CVS repository" + @echo "This will be deleted before making the distribution" + @echo "" + @if test ! -d admin; then \ + echo "Please recheckout this module!" ;\ + echo "for cvs: use checkout once and after that update again" ;\ + echo "for cvsup: checkout kde-common from cvsup and" ;\ + echo " link kde-common/admin to ./admin" ;\ + exit 1 ;\ + fi + $(MAKE) -f admin/Makefile.common cvs + +.SILENT: + @@ -0,0 +1,97 @@ +In this file: + +* About kdegraphics +* Common Mistakes +* Debugging +* More Info + + +About kdegraphics +----------------- +kdegraphics is a collection of graphic oriented applications: + +* debian + Files needed to create Debian packages. + +* doc + XML based documentation for the programs. + +* kamera + Digital camera io_slave for Konqueror. Together gPhoto this allows you + to access your camera's picture with the URL kamera:/ + +* kcoloredit + Contains two programs: a color value editor and also a color picker. + +* kdvi + Program (and embeddable KPart) to display *.DVI files from TeX. + +* kfax + A program to display raw and tiffed fax images (g3, g3-2d, g4). + +* kfaxview + An embeddable KPart to display tiffed fax images. + +* kfile-plugins + Provide meta information for graphic files. + +* kghostview + Program (and embeddable KPart) to display *.pdf and *.ps + +* kiconedit + An icon editor. + +* kmrml + Connects to a MRML server and find similar images + +* kooka + A raster image scan program, based on SANE and libkscan. + +* kolourpaint + An easy-to-use paint program designed for everyday tasks like drawing + simple diagrams/logos/icons and editing screenshots. + +* kpovmodeler + Program to enter scenes for the 3D rendering engine PovRay. + +* kruler + A ruler in inch, centimeter and pixel to check distances on the screen. + +* ksnapshot + Make snapshots of the screen contents. + +* kuickshow + Fast and comfortable imageviewer. + +* kview + Picture viewer, provided as standalone program and embeddable KPart. + +* kviewshell + Generic framework for viewer applications. + +* libkscan + Library to access scanners used by kooka (and koffice), needs SANE to be + used + + +Common Mistakes +--------------- +If configure claims Qt cannot be found, have a look at http://www.trolltech.com +to get a copy of latest Qt 3.3.x version. + + +Debugging +--------- +You can use --enable-debug with the configure script, if you want to have +debug code in your KDE apps and libs. This will ensure useful and more +verbose backtraces, but will require a lot more disk space. + + +More Info +--------- +Please direct any bug reports to our bug list by visiting +http://bugs.kde.org. + +General KDE discussions should go to the KDE mailing list (kde@kde.org). + + diff --git a/acinclude.m4 b/acinclude.m4 new file mode 100644 index 0000000..ffda7a5 --- /dev/null +++ b/acinclude.m4 @@ -0,0 +1,11920 @@ +## -*- autoconf -*- + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) +dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +dnl IMPORTANT NOTE: +dnl Please do not modify this file unless you expect your modifications to be +dnl carried into every other module in the repository. +dnl +dnl Single-module modifications are best placed in configure.in for kdelibs +dnl and kdebase or configure.in.in if present. + +# KDE_PATH_X_DIRECT +dnl Internal subroutine of AC_PATH_X. +dnl Set ac_x_includes and/or ac_x_libraries. +AC_DEFUN([KDE_PATH_X_DIRECT], +[ +AC_REQUIRE([KDE_CHECK_LIB64]) + +if test "$ac_x_includes" = NO; then + # Guess where to find include files, by looking for this one X11 .h file. + test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h + + # First, try using that file with no special directory specified. +AC_TRY_CPP([#include <$x_direct_test_include>], +[# We can compile using X headers with no special include directory. +ac_x_includes=], +[# Look for the header file in a standard set of common directories. +# Check X11 before X11Rn because it is often a symlink to the current release. + for ac_dir in \ + /usr/X11/include \ + /usr/X11R6/include \ + /usr/X11R5/include \ + /usr/X11R4/include \ + \ + /usr/include/X11 \ + /usr/include/X11R6 \ + /usr/include/X11R5 \ + /usr/include/X11R4 \ + \ + /usr/local/X11/include \ + /usr/local/X11R6/include \ + /usr/local/X11R5/include \ + /usr/local/X11R4/include \ + \ + /usr/local/include/X11 \ + /usr/local/include/X11R6 \ + /usr/local/include/X11R5 \ + /usr/local/include/X11R4 \ + \ + /usr/X386/include \ + /usr/x386/include \ + /usr/XFree86/include/X11 \ + \ + /usr/include \ + /usr/local/include \ + /usr/unsupported/include \ + /usr/athena/include \ + /usr/local/x11r5/include \ + /usr/lpp/Xamples/include \ + \ + /usr/openwin/include \ + /usr/openwin/share/include \ + ; \ + do + if test -r "$ac_dir/$x_direct_test_include"; then + ac_x_includes=$ac_dir + break + fi + done]) +fi # $ac_x_includes = NO + +if test "$ac_x_libraries" = NO; then + # Check for the libraries. + + test -z "$x_direct_test_library" && x_direct_test_library=Xt + test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc + + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS="$LIBS" + LIBS="-l$x_direct_test_library $LIBS" +AC_TRY_LINK([#include <X11/Intrinsic.h>], [${x_direct_test_function}(1)], +[LIBS="$ac_save_LIBS" +# We can link X programs with no special library path. +ac_x_libraries=], +[LIBS="$ac_save_LIBS" +# First see if replacing the include by lib works. +# Check X11 before X11Rn because it is often a symlink to the current release. +for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \ + /usr/X11/lib${kdelibsuff} \ + /usr/X11R6/lib${kdelibsuff} \ + /usr/X11R5/lib${kdelibsuff} \ + /usr/X11R4/lib${kdelibsuff} \ + \ + /usr/lib${kdelibsuff}/X11 \ + /usr/lib${kdelibsuff}/X11R6 \ + /usr/lib${kdelibsuff}/X11R5 \ + /usr/lib${kdelibsuff}/X11R4 \ + \ + /usr/local/X11/lib${kdelibsuff} \ + /usr/local/X11R6/lib${kdelibsuff} \ + /usr/local/X11R5/lib${kdelibsuff} \ + /usr/local/X11R4/lib${kdelibsuff} \ + \ + /usr/local/lib${kdelibsuff}/X11 \ + /usr/local/lib${kdelibsuff}/X11R6 \ + /usr/local/lib${kdelibsuff}/X11R5 \ + /usr/local/lib${kdelibsuff}/X11R4 \ + \ + /usr/X386/lib${kdelibsuff} \ + /usr/x386/lib${kdelibsuff} \ + /usr/XFree86/lib${kdelibsuff}/X11 \ + \ + /usr/lib${kdelibsuff} \ + /usr/local/lib${kdelibsuff} \ + /usr/unsupported/lib${kdelibsuff} \ + /usr/athena/lib${kdelibsuff} \ + /usr/local/x11r5/lib${kdelibsuff} \ + /usr/lpp/Xamples/lib${kdelibsuff} \ + /lib/usr/lib${kdelibsuff}/X11 \ + \ + /usr/openwin/lib${kdelibsuff} \ + /usr/openwin/share/lib${kdelibsuff} \ + ; \ +do +dnl Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do + if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done]) +fi # $ac_x_libraries = NO +]) + + +dnl ------------------------------------------------------------------------ +dnl Find a file (or one of more files in a list of dirs) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_FIND_FILE], +[ +$3=NO +for i in $2; +do + for j in $1; + do + echo "configure: __oline__: $i/$j" >&AC_FD_CC + if test -r "$i/$j"; then + echo "taking that" >&AC_FD_CC + $3=$i + break 2 + fi + done +done +]) + +dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, +dnl if-not-found, test-parameter, prepend-path) +dnl +dnl Look for program-name in list-of-dirs+$PATH. +dnl If prepend-path is set, look in $PATH+list-of-dirs instead. +dnl If found, $variable-name is set. If not, if-not-found is evaluated. +dnl test-parameter: if set, the program is executed with this arg, +dnl and only a successful exit code is required. +AC_DEFUN([KDE_FIND_PATH], +[ + AC_MSG_CHECKING([for $1]) + if test -n "$$2"; then + kde_cv_path="$$2"; + else + kde_cache=`echo $1 | sed 'y%./+-%__p_%'` + + AC_CACHE_VAL(kde_cv_path_$kde_cache, + [ + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + dirs="" + for dir in $PATH; do + dirs="$dirs $dir" + done + if test -z "$6"; then dnl Append dirs in PATH (default) + dirs="$3 $dirs" + else dnl Prepend dirs in PATH (if 6th arg is set) + dirs="$dirs $3" + fi + IFS=$kde_save_IFS + + for dir in $dirs; do + if test -x "$dir/$1"; then + if test -n "$5" + then + evalstr="$dir/$1 $5 2>&1 " + if eval $evalstr; then + kde_cv_path="$dir/$1" + break + fi + else + kde_cv_path="$dir/$1" + break + fi + fi + done + + eval "kde_cv_path_$kde_cache=$kde_cv_path" + + ]) + + eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" + + fi + + if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then + AC_MSG_RESULT(not found) + $4 + else + AC_MSG_RESULT($kde_cv_path) + $2=$kde_cv_path + + fi +]) + +AC_DEFUN([KDE_MOC_ERROR_MESSAGE], +[ + AC_MSG_ERROR([No Qt meta object compiler (moc) found! +Please check whether you installed Qt correctly. +You need to have a running moc binary. +configure tried to run $ac_cv_path_moc and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable MOC to the right one before running +configure. +]) +]) + +AC_DEFUN([KDE_UIC_ERROR_MESSAGE], +[ + AC_MSG_WARN([No Qt ui compiler (uic) found! +Please check whether you installed Qt correctly. +You need to have a running uic binary. +configure tried to run $ac_cv_path_uic and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable UIC to the right one before running +configure. +]) +]) + + +AC_DEFUN([KDE_CHECK_UIC_FLAG], +[ + AC_MSG_CHECKING([whether uic supports -$1 ]) + kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` + AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, + [ + cat >conftest.ui <<EOT + <!DOCTYPE UI><UI version="3" stdsetdef="1"></UI> +EOT + ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" + if AC_TRY_EVAL(ac_uic_testrun); then + eval "kde_cv_prog_uic_$kde_cache=yes" + else + eval "kde_cv_prog_uic_$kde_cache=no" + fi + rm -f conftest* + ]) + + if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then + AC_MSG_RESULT([yes]) + : + $3 + else + AC_MSG_RESULT([no]) + : + $4 + fi +]) + + +dnl ------------------------------------------------------------------------ +dnl Find the meta object compiler and the ui compiler in the PATH, +dnl in $QTDIR/bin, and some more usual places +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_MOC_UIC], +[ + AC_REQUIRE([KDE_CHECK_PERL]) + qt_bindirs="" + for dir in $kde_qt_dirs; do + qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" + done + qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" + if test ! "$ac_qt_bindir" = "NO"; then + qt_bindirs="$ac_qt_bindir $qt_bindirs" + fi + + KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) + if test -z "$UIC_NOT_NEEDED"; then + KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) + if test -z "$UIC_PATH" ; then + KDE_UIC_ERROR_MESSAGE + exit 1 + else + UIC=$UIC_PATH + + if test $kde_qtver = 3; then + KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) + KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) + + if test x$ac_uic_supports_libpath = xyes; then + UIC="$UIC -L \$(kde_widgetdir)" + fi + if test x$ac_uic_supports_nounload = xyes; then + UIC="$UIC -nounload" + fi + fi + fi + else + UIC="echo uic not available: " + fi + + AC_SUBST(MOC) + AC_SUBST(UIC) + + UIC_TR="i18n" + if test $kde_qtver = 3; then + UIC_TR="tr2i18n" + fi + + AC_SUBST(UIC_TR) +]) + +AC_DEFUN([KDE_1_CHECK_PATHS], +[ + KDE_1_CHECK_PATH_HEADERS + + KDE_TEST_RPATH= + + if test -n "$USE_RPATH"; then + + if test -n "$kde_libraries"; then + KDE_TEST_RPATH="-R $kde_libraries" + fi + + if test -n "$qt_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" + fi + + if test -n "$x_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" + fi + + KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" + fi + +AC_MSG_CHECKING([for KDE libraries installed]) +ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR([your system fails at linking a small KDE application! +Check, if your compiler is installed correctly and if you have used the +same compiler to compile Qt and kdelibs as you did use now. +For more details about this problem, look at the end of config.log.]) +fi + +if eval `KDEDIR= ./conftest 2>&5`; then + kde_result=done +else + kde_result=problems +fi + +KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log +kde_have_all_paths=yes + +KDE_SET_PATHS($kde_result) + +]) + +AC_DEFUN([KDE_SET_PATHS], +[ + kde_cv_all_paths="kde_have_all_paths=\"yes\" \ + kde_htmldir=\"$kde_htmldir\" \ + kde_appsdir=\"$kde_appsdir\" \ + kde_icondir=\"$kde_icondir\" \ + kde_sounddir=\"$kde_sounddir\" \ + kde_datadir=\"$kde_datadir\" \ + kde_locale=\"$kde_locale\" \ + kde_cgidir=\"$kde_cgidir\" \ + kde_confdir=\"$kde_confdir\" \ + kde_kcfgdir=\"$kde_kcfgdir\" \ + kde_mimedir=\"$kde_mimedir\" \ + kde_toolbardir=\"$kde_toolbardir\" \ + kde_wallpaperdir=\"$kde_wallpaperdir\" \ + kde_templatesdir=\"$kde_templatesdir\" \ + kde_bindir=\"$kde_bindir\" \ + kde_servicesdir=\"$kde_servicesdir\" \ + kde_servicetypesdir=\"$kde_servicetypesdir\" \ + kde_moduledir=\"$kde_moduledir\" \ + kde_styledir=\"$kde_styledir\" \ + kde_widgetdir=\"$kde_widgetdir\" \ + xdg_appsdir=\"$xdg_appsdir\" \ + xdg_menudir=\"$xdg_menudir\" \ + xdg_directorydir=\"$xdg_directorydir\" \ + kde_result=$1" +]) + +AC_DEFUN([KDE_SET_DEFAULT_PATHS], +[ +if test "$1" = "default"; then + + if test -z "$kde_htmldir"; then + kde_htmldir='\${datadir}/doc/HTML' + fi + if test -z "$kde_appsdir"; then + kde_appsdir='\${datadir}/applnk' + fi + if test -z "$kde_icondir"; then + kde_icondir='\${datadir}/icons' + fi + if test -z "$kde_sounddir"; then + kde_sounddir='\${datadir}/sounds' + fi + if test -z "$kde_datadir"; then + kde_datadir='\${datadir}/apps' + fi + if test -z "$kde_locale"; then + kde_locale='\${datadir}/locale' + fi + if test -z "$kde_cgidir"; then + kde_cgidir='\${exec_prefix}/cgi-bin' + fi + if test -z "$kde_confdir"; then + kde_confdir='\${datadir}/config' + fi + if test -z "$kde_kcfgdir"; then + kde_kcfgdir='\${datadir}/config.kcfg' + fi + if test -z "$kde_mimedir"; then + kde_mimedir='\${datadir}/mimelnk' + fi + if test -z "$kde_toolbardir"; then + kde_toolbardir='\${datadir}/toolbar' + fi + if test -z "$kde_wallpaperdir"; then + kde_wallpaperdir='\${datadir}/wallpapers' + fi + if test -z "$kde_templatesdir"; then + kde_templatesdir='\${datadir}/templates' + fi + if test -z "$kde_bindir"; then + kde_bindir='\${exec_prefix}/bin' + fi + if test -z "$kde_servicesdir"; then + kde_servicesdir='\${datadir}/services' + fi + if test -z "$kde_servicetypesdir"; then + kde_servicetypesdir='\${datadir}/servicetypes' + fi + if test -z "$kde_moduledir"; then + if test "$kde_qtver" = "2"; then + kde_moduledir='\${libdir}/kde2' + else + kde_moduledir='\${libdir}/kde3' + fi + fi + if test -z "$kde_styledir"; then + kde_styledir='\${libdir}/kde3/plugins/styles' + fi + if test -z "$kde_widgetdir"; then + kde_widgetdir='\${libdir}/kde3/plugins/designer' + fi + if test -z "$xdg_appsdir"; then + xdg_appsdir='\${datadir}/applications/kde' + fi + if test -z "$xdg_menudir"; then + xdg_menudir='\${sysconfdir}/xdg/menus' + fi + if test -z "$xdg_directorydir"; then + xdg_directorydir='\${datadir}/desktop-directories' + fi + + KDE_SET_PATHS(defaults) + +else + + if test $kde_qtver = 1; then + AC_MSG_RESULT([compiling]) + KDE_1_CHECK_PATHS + else + AC_MSG_ERROR([path checking not yet supported for KDE 2]) + fi + +fi +]) + +AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], +[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || + test -z "$kde_icondir" || test -z "$kde_sounddir" || + test -z "$kde_datadir" || test -z "$kde_locale" || + test -z "$kde_cgidir" || test -z "$kde_confdir" || + test -z "$kde_kcfgdir" || + test -z "$kde_mimedir" || test -z "$kde_toolbardir" || + test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || + test -z "$kde_bindir" || test -z "$kde_servicesdir" || + test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || + test -z "$kde_styledir" || test -z "kde_widgetdir" || + test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || + test "x$kde_have_all_paths" != "xyes"; then + kde_have_all_paths=no + fi +]) + +AC_DEFUN([KDE_MISSING_PROG_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed KDE correctly. +]) +]) + +AC_DEFUN([KDE_MISSING_ARTS_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed aRts correctly or use +--without-arts to compile without aRts support (this will remove functionality). +]) +]) + +AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], +[ + kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" + test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs" + if test -n "$KDEDIRS"; then + kde_save_IFS=$IFS + IFS=: + for dir in $KDEDIRS; do + kde_default_bindirs="$dir/bin $kde_default_bindirs " + done + IFS=$kde_save_IFS + fi +]) + +AC_DEFUN([KDE_SUBST_PROGRAMS], +[ + AC_ARG_WITH(arts, + AC_HELP_STRING([--without-arts],[build without aRts [default=no]]), + [build_arts=$withval], + [build_arts=yes] + ) + AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no") + if test "$build_arts" = "no"; then + AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts]) + fi + + KDE_SET_DEFAULT_BINDIRS + kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" + KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) + KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) + if test "$build_arts" '!=' "no"; then + KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) + KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) + fi + KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) + + kde32ornewer=1 + kde33ornewer=1 + if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then + kde32ornewer= + kde33ornewer= + else + if test "$kde_qtver" = "3"; then + if test "$kde_qtsubver" -le 1; then + kde32ornewer= + fi + if test "$kde_qtsubver" -le 2; then + kde33ornewer= + fi + if test "$KDECONFIG" != "compiled"; then + if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then + kde33ornewer= + fi + fi + fi + fi + + if test -n "$kde32ornewer"; then + KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)]) + KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) + fi + if test -n "$kde33ornewer"; then + KDE_FIND_PATH(makekdewidgets, MAKEKDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(makekdewidgets)]) + AC_SUBST(MAKEKDEWIDGETS) + fi + KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""]) + + if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then + kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" + test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" + AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) + if test "$KDE_XSL_STYLESHEET" = "NO"; then + KDE_XSL_STYLESHEET="" + else + KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" + fi + fi + + DCOP_DEPENDENCIES='$(DCOPIDL)' + if test -n "$kde32ornewer"; then + KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' + DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' + AC_SUBST(KCONFIG_COMPILER) + AC_SUBST(KCFG_DEPENDENCIES) + AC_SUBST(DCOPIDLNG) + fi + AC_SUBST(DCOPIDL) + AC_SUBST(DCOPIDL2CPP) + AC_SUBST(DCOP_DEPENDENCIES) + AC_SUBST(MCOPIDL) + AC_SUBST(ARTSCCONFIG) + AC_SUBST(MEINPROC) + AC_SUBST(KDE_XSL_STYLESHEET) + AC_SUBST(XMLLINT) +])dnl + +AC_DEFUN([AC_CREATE_KFSSTND], +[ +AC_REQUIRE([AC_CHECK_RPATH]) + +AC_MSG_CHECKING([for KDE paths]) +kde_result="" +kde_cached_paths=yes +AC_CACHE_VAL(kde_cv_all_paths, +[ + KDE_SET_DEFAULT_PATHS($1) + kde_cached_paths=no +]) +eval "$kde_cv_all_paths" +KDE_CHECK_PATHS_FOR_COMPLETENESS +if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then + # wrong values were cached, may be, we can set better ones + kde_result= + kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= + kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= + kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= + kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= + kde_have_all_paths= + kde_styledir= + kde_widgetdir= + xdg_appsdir = xdg_menudir= xdg_directorydir= + KDE_SET_DEFAULT_PATHS($1) + eval "$kde_cv_all_paths" + KDE_CHECK_PATHS_FOR_COMPLETENESS + kde_result="$kde_result (cache overridden)" +fi +if test "$kde_have_all_paths" = "no"; then + AC_MSG_ERROR([configure could not run a little KDE program to test the environment. +Since it had compiled and linked before, it must be a strange problem on your system. +Look at config.log for details. If you are not able to fix this, look at +http://www.kde.org/faq/installation.html or any www.kde.org mirror. +(If you're using an egcs version on Linux, you may update binutils!) +]) +else + rm -f conftest* + AC_MSG_RESULT($kde_result) +fi + +bindir=$kde_bindir + +KDE_SUBST_PROGRAMS + +]) + +AC_DEFUN([AC_SUBST_KFSSTND], +[ +AC_SUBST(kde_htmldir) +AC_SUBST(kde_appsdir) +AC_SUBST(kde_icondir) +AC_SUBST(kde_sounddir) +AC_SUBST(kde_datadir) +AC_SUBST(kde_locale) +AC_SUBST(kde_confdir) +AC_SUBST(kde_kcfgdir) +AC_SUBST(kde_mimedir) +AC_SUBST(kde_wallpaperdir) +AC_SUBST(kde_bindir) +dnl X Desktop Group standards +AC_SUBST(xdg_appsdir) +AC_SUBST(xdg_menudir) +AC_SUBST(xdg_directorydir) +dnl for KDE 2 +AC_SUBST(kde_templatesdir) +AC_SUBST(kde_servicesdir) +AC_SUBST(kde_servicetypesdir) +AC_SUBST(kde_moduledir) +AC_SUBST(kdeinitdir, '$(kde_moduledir)') +AC_SUBST(kde_styledir) +AC_SUBST(kde_widgetdir) +if test "$kde_qtver" = 1; then + kde_minidir="$kde_icondir/mini" +else +# for KDE 1 - this breaks KDE2 apps using minidir, but +# that's the plan ;-/ + kde_minidir="/dev/null" +fi +dnl AC_SUBST(kde_minidir) +dnl AC_SUBST(kde_cgidir) +dnl AC_SUBST(kde_toolbardir) +]) + +AC_DEFUN([KDE_MISC_TESTS], +[ + dnl Checks for libraries. + AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD + AC_SUBST(LIBUTIL) + AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD + AC_SUBST(LIBCOMPAT) + kde_have_crypt= + AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], + AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ + AC_MSG_WARN([you have no crypt in either libcrypt or libc. +You should install libcrypt from another source or configure with PAM +support]) + kde_have_crypt=no + ])) + AC_SUBST(LIBCRYPT) + if test $kde_have_crypt = yes; then + AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) + fi + AC_CHECK_SOCKLEN_T + AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + AC_CHECK_LIB(dnet_stub, dnet_ntoa, + [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) + fi + AC_CHECK_FUNC(inet_ntoa) + if test $ac_cv_func_inet_ntoa = no; then + AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") + fi + AC_CHECK_FUNC(connect) + if test $ac_cv_func_connect = no; then + AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , + $X_EXTRA_LIBS) + fi + + AC_CHECK_FUNC(remove) + if test $ac_cv_func_remove = no; then + AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + AC_CHECK_FUNC(shmat, , + AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) + + # more headers that need to be explicitly included on darwin + AC_CHECK_HEADERS(sys/types.h stdint.h) + + # sys/bitypes.h is needed for uint32_t and friends on Tru64 + AC_CHECK_HEADERS(sys/bitypes.h) + + # darwin requires a poll emulation library + AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") + + # for some image handling on Mac OS X + AC_CHECK_HEADERS(Carbon/Carbon.h) + + # CoreAudio framework + AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ + AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) + FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio" + ]) + + AC_CHECK_RES_INIT + AC_SUBST(LIB_POLL) + AC_SUBST(FRAMEWORK_COREAUDIO) + LIBSOCKET="$X_EXTRA_LIBS" + AC_SUBST(LIBSOCKET) + AC_SUBST(X_EXTRA_LIBS) + AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 + AC_SUBST(LIBUCB) + + case $host in dnl this *is* LynxOS specific + *-*-lynxos* ) + AC_MSG_CHECKING([LynxOS header file wrappers]) + [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] + AC_MSG_RESULT(disabled) + AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS + ;; + esac + + KDE_CHECK_TYPES + KDE_CHECK_LIBDL + KDE_CHECK_STRLCPY + KDE_CHECK_PIE_SUPPORT + +# darwin needs this to initialize the environment +AC_CHECK_HEADERS(crt_externs.h) +AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) + +AH_VERBATIM(_DARWIN_ENVIRON, +[ +#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) +# include <sys/time.h> +# include <crt_externs.h> +# define environ (*_NSGetEnviron()) +#endif +]) + +AH_VERBATIM(_AIX_STRINGS_H_BZERO, +[ +/* + * AIX defines FD_SET in terms of bzero, but fails to include <strings.h> + * that defines bzero. + */ + +#if defined(_AIX) +#include <strings.h> +#endif +]) + +AC_CHECK_FUNCS([vsnprintf snprintf]) + +AH_VERBATIM(_TRU64,[ +/* + * On HP-UX, the declaration of vsnprintf() is needed every time ! + */ + +#if !defined(HAVE_VSNPRINTF) || defined(hpux) +#if __STDC__ +#include <stdarg.h> +#include <stdlib.h> +#else +#include <varargs.h> +#endif +#ifdef __cplusplus +extern "C" +#endif +int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); +#ifdef __cplusplus +extern "C" +#endif +int snprintf(char *str, size_t n, char const *fmt, ...); +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Find the header files and libraries for X-Windows. Extended the +dnl macro AC_PATH_X +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([K_PATH_X], +[ +AC_REQUIRE([KDE_MISC_TESTS])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_ARG_ENABLE( + embedded, + AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), + kde_use_qt_emb=$enableval, + kde_use_qt_emb=no +) + +AC_ARG_ENABLE( + qtopia, + AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), + kde_use_qt_emb_palm=$enableval, + kde_use_qt_emb_palm=no +) + +AC_ARG_ENABLE( + mac, + AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), + kde_use_qt_mac=$enableval, + kde_use_qt_mac=no +) + +# used to disable x11-specific stuff on special platforms +AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no") + +if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then + +AC_MSG_CHECKING(for X) + +AC_CACHE_VAL(kde_cv_have_x, +[# One or both of the vars are not set, and there is no cached value. +if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then + kde_x_includes=NO +else + kde_x_includes=$x_includes +fi +if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then + kde_x_libraries=NO +else + kde_x_libraries=$x_libraries +fi + +# below we use the standard autoconf calls +ac_x_libraries=$kde_x_libraries +ac_x_includes=$kde_x_includes + +KDE_PATH_X_DIRECT +dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. +dnl Unfortunately, if compiling with the N32 ABI, this is not the correct +dnl location. The correct location is /usr/lib32 or an undefined value +dnl (the linker is smart enough to pick the correct default library). +dnl Things work just fine if you use just AC_PATH_X_DIRECT. +dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to +dnl /usr/openwin/include, which doesn't work. /usr/include does work, so +dnl x_includes should be left alone. +case "$host" in +mips-sgi-irix6*) + ;; +*-*-solaris*) + ;; +*) + _AC_PATH_X_XMKMF + if test -z "$ac_x_includes"; then + ac_x_includes="." + fi + if test -z "$ac_x_libraries"; then + ac_x_libraries="/usr/lib${kdelibsuff}" + fi +esac +#from now on we use our own again + +# when the user already gave --x-includes, we ignore +# what the standard autoconf macros told us. +if test "$kde_x_includes" = NO; then + kde_x_includes=$ac_x_includes +fi + +# for --x-libraries too +if test "$kde_x_libraries" = NO; then + kde_x_libraries=$ac_x_libraries +fi + +if test "$kde_x_includes" = NO; then + AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) +fi + +if test "$kde_x_libraries" = NO; then + AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) +fi + +# Record where we found X for the cache. +kde_cv_have_x="have_x=yes \ + kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" +])dnl + +eval "$kde_cv_have_x" + +if test "$have_x" != yes; then + AC_MSG_RESULT($have_x) + no_x=yes +else + AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) +fi + +if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then + X_INCLUDES="" + x_includes="."; dnl better than nothing :- + else + x_includes=$kde_x_includes + X_INCLUDES="-I$x_includes" +fi + +if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then + X_LDFLAGS="" + x_libraries="/usr/lib"; dnl better than nothing :- + else + x_libraries=$kde_x_libraries + X_LDFLAGS="-L$x_libraries" +fi +all_includes="$X_INCLUDES" +all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS" + +# Check for libraries that X11R6 Xt/Xaw programs need. +ac_save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $X_LDFLAGS" +# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to +# check for ICE first), but we must link in the order -lSM -lICE or +# we get undefined symbols. So assume we have SM if we have ICE. +# These have to be linked with before -lX11, unlike the other +# libraries we check for below, so use a different variable. +# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. +AC_CHECK_LIB(ICE, IceConnectionNumber, + [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) +LDFLAGS="$ac_save_LDFLAGS" + +LIB_X11='-lX11 $(LIBSOCKET)' + +AC_MSG_CHECKING(for libXext) +AC_CACHE_VAL(kde_cv_have_libXext, +[ +kde_ldflags_safe="$LDFLAGS" +kde_libs_safe="$LIBS" + +LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" +LIBS="-lXext -lX11 $LIBSOCKET" + +AC_TRY_LINK([ +#include <stdio.h> +#ifdef STDC_HEADERS +# include <stdlib.h> +#endif +], +[ +printf("hello Xext\n"); +], +kde_cv_have_libXext=yes, +kde_cv_have_libXext=no +) + +LDFLAGS=$kde_ldflags_safe +LIBS=$kde_libs_safe +]) + +AC_MSG_RESULT($kde_cv_have_libXext) + +if test "$kde_cv_have_libXext" = "no"; then + AC_MSG_ERROR([We need a working libXext to proceed. Since configure +can't find it itself, we stop here assuming that make wouldn't find +them either.]) +fi + +LIB_XEXT="-lXext" +QTE_NORTTI="" + +elif test "$kde_use_qt_emb" = "yes"; then + dnl We're using QT Embedded + CPPFLAGS=-DQWS + CXXFLAGS="$CXXFLAGS -fno-rtti" + QTE_NORTTI="-fno-rtti -DQWS" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +elif test "$kde_use_qt_mac" = "yes"; then + dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to + dnl be included to get the information) --Sam + CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" + CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +fi +AC_SUBST(X_PRE_LIBS) +AC_SUBST(LIB_X11) +AC_SUBST(LIB_XRENDER) +AC_SUBST(LIBSM) +AC_SUBST(X_INCLUDES) +AC_SUBST(X_LDFLAGS) +AC_SUBST(x_includes) +AC_SUBST(x_libraries) +AC_SUBST(QTE_NORTTI) +AC_SUBST(LIB_XEXT) + +]) + +AC_DEFUN([KDE_PRINT_QT_PROGRAM], +[ +AC_REQUIRE([KDE_USE_QT]) +cat > conftest.$ac_ext <<EOF +#include "confdefs.h" +#include <qglobal.h> +#include <qapplication.h> +EOF +if test "$kde_qtver" = "2"; then +cat >> conftest.$ac_ext <<EOF +#include <qevent.h> +#include <qstring.h> +#include <qstyle.h> +EOF + +if test $kde_qtsubver -gt 0; then +cat >> conftest.$ac_ext <<EOF +#if QT_VERSION < 210 +#error 1 +#endif +EOF +fi +fi + +if test "$kde_qtver" = "3"; then +cat >> conftest.$ac_ext <<EOF +#include <qcursor.h> +#include <qstylefactory.h> +#include <private/qucomextra_p.h> +EOF +fi + +echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext +cat >> conftest.$ac_ext <<EOF +#error 1 +#endif + +int main() { +EOF +if test "$kde_qtver" = "2"; then +cat >> conftest.$ac_ext <<EOF + QStringList *t = new QStringList(); + Q_UNUSED(t); +EOF +if test $kde_qtsubver -gt 0; then +cat >> conftest.$ac_ext <<EOF + QString s; + s.setLatin1("Elvis is alive", 14); +EOF +fi +fi +if test "$kde_qtver" = "3"; then +cat >> conftest.$ac_ext <<EOF + (void)QStyleFactory::create(QString::null); + QCursor c(Qt::WhatsThisCursor); +EOF +fi +cat >> conftest.$ac_ext <<EOF + return 0; +} +EOF +]) + +AC_DEFUN([KDE_USE_QT], +[ +if test -z "$1"; then + # Current default Qt version: 3.3 + kde_qtver=3 + kde_qtsubver=3 +else + kde_qtsubver=`echo "$1" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'` + # following is the check if subversion isnt found in passed argument + if test "$kde_qtsubver" = "$1"; then + kde_qtsubver=1 + fi + kde_qtver=`echo "$1" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'` + if test "$kde_qtver" = "1"; then + kde_qtsubver=42 + fi +fi + +if test -z "$2"; then + if test "$kde_qtver" = "2"; then + if test $kde_qtsubver -gt 0; then + kde_qt_minversion=">= Qt 2.2.2" + else + kde_qt_minversion=">= Qt 2.0.2" + fi + fi + if test "$kde_qtver" = "3"; then + if test $kde_qtsubver -gt 0; then + if test $kde_qtsubver -gt 1; then + if test $kde_qtsubver -gt 2; then + kde_qt_minversion=">= Qt 3.3 and < 4.0" + else + kde_qt_minversion=">= Qt 3.2 and < 4.0" + fi + else + kde_qt_minversion=">= Qt 3.1 (20021021) and < 4.0" + fi + else + kde_qt_minversion=">= Qt 3.0 and < 4.0" + fi + fi + if test "$kde_qtver" = "1"; then + kde_qt_minversion=">= 1.42 and < 2.0" + fi +else + kde_qt_minversion="$2" +fi + +if test -z "$3"; then + if test $kde_qtver = 3; then + if test $kde_qtsubver -gt 0; then + kde_qt_verstring="QT_VERSION >= 0x03@VER@00 && QT_VERSION < 0x040000" + qtsubver=`echo "00$kde_qtsubver" | sed -e 's,.*\(..\)$,\1,'` + kde_qt_verstring=`echo $kde_qt_verstring | sed -e "s,@VER@,$qtsubver,"` + else + kde_qt_verstring="QT_VERSION >= 300 && QT_VERSION < 0x040000" + fi + fi + if test $kde_qtver = 2; then + if test $kde_qtsubver -gt 0; then + kde_qt_verstring="QT_VERSION >= 222" + else + kde_qt_verstring="QT_VERSION >= 200" + fi + fi + if test $kde_qtver = 1; then + kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200" + fi +else + kde_qt_verstring="$3" +fi + +if test $kde_qtver = 4; then + kde_qt_dirs="$QTDIR /usr/lib/qt4 /usr/lib/qt /usr/share/qt4" +fi +if test $kde_qtver = 3; then + kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3" +fi +if test $kde_qtver = 2; then + kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt" +fi +if test $kde_qtver = 1; then + kde_qt_dirs="$QTDIR /usr/lib/qt" +fi +]) + +AC_DEFUN([KDE_CHECK_QT_DIRECT], +[ +AC_REQUIRE([KDE_USE_QT]) +AC_MSG_CHECKING([if Qt compiles without flags]) +AC_CACHE_VAL(kde_cv_qt_direct, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH +ac_LIBRARY_PATH="$LIBRARY_PATH" +ac_cxxflags_safe="$CXXFLAGS" +ac_ldflags_safe="$LDFLAGS" +ac_libs_safe="$LIBS" + +CXXFLAGS="$CXXFLAGS -I$qt_includes" +LDFLAGS="$LDFLAGS $X_LDFLAGS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$LIBQT -lXext -lX11 $LIBSOCKET" +else +LIBS="$LIBQT $LIBSOCKET" +fi +LD_LIBRARY_PATH= +export LD_LIBRARY_PATH +LIBRARY_PATH= +export LIBRARY_PATH + +KDE_PRINT_QT_PROGRAM + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + kde_cv_qt_direct="yes" +else + kde_cv_qt_direct="no" + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC +fi + +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" +export LD_LIBRARY_PATH +LIBRARY_PATH="$ac_LIBRARY_PATH" +export LIBRARY_PATH +AC_LANG_RESTORE +]) + +if test "$kde_cv_qt_direct" = "yes"; then + AC_MSG_RESULT(yes) + $1 +else + AC_MSG_RESULT(no) + $2 +fi +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the Qt headers and libraries. +dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) +dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_1_3], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([KDE_USE_QT]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +dnl ------------------------------------------------------------------------ +dnl Add configure flag to enable linking to MT version of Qt library. +dnl ------------------------------------------------------------------------ + +AC_ARG_ENABLE( + mt, + AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), + kde_use_qt_mt=$enableval, + [ + if test $kde_qtver = 3; then + kde_use_qt_mt=yes + else + kde_use_qt_mt=no + fi + ] +) + +USING_QT_MT="" + +dnl ------------------------------------------------------------------------ +dnl If we not get --disable-qt-mt then adjust some vars for the host. +dnl ------------------------------------------------------------------------ + +KDE_MT_LDFLAGS= +KDE_MT_LIBS= +if test "x$kde_use_qt_mt" = "xyes"; then + KDE_CHECK_THREADING + if test "x$kde_use_threading" = "xyes"; then + CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" + KDE_MT_LDFLAGS="$USE_THREADS" + KDE_MT_LIBS="$LIBPTHREAD" + else + kde_use_qt_mt=no + fi +fi +AC_SUBST(KDE_MT_LDFLAGS) +AC_SUBST(KDE_MT_LIBS) + +kde_qt_was_given=yes + +dnl ------------------------------------------------------------------------ +dnl If we haven't been told how to link to Qt, we work it out for ourselves. +dnl ------------------------------------------------------------------------ +if test -z "$LIBQT_GLOB"; then + if test "x$kde_use_qt_emb" = "xyes"; then + LIBQT_GLOB="libqte.*" + else + LIBQT_GLOB="libqt.*" + fi +fi + +dnl ------------------------------------------------------------ +dnl If we got --enable-embedded then adjust the Qt library name. +dnl ------------------------------------------------------------ +if test "x$kde_use_qt_emb" = "xyes"; then + qtlib="qte" +else + qtlib="qt" +fi + +kde_int_qt="-l$qtlib" + +if test -z "$LIBQPE"; then +dnl ------------------------------------------------------------ +dnl If we got --enable-palmtop then add -lqpe to the link line +dnl ------------------------------------------------------------ + if test "x$kde_use_qt_emb" = "xyes"; then + if test "x$kde_use_qt_emb_palm" = "xyes"; then + LIB_QPE="-lqpe" + else + LIB_QPE="" + fi + else + LIB_QPE="" + fi +fi + +dnl ------------------------------------------------------------------------ +dnl If we got --enable-qt-mt then adjust the Qt library name for the host. +dnl ------------------------------------------------------------------------ + +if test "x$kde_use_qt_mt" = "xyes"; then + LIBQT="-l$qtlib-mt" + kde_int_qt="-l$qtlib-mt" + LIBQT_GLOB="lib$qtlib-mt.*" + USING_QT_MT="using -mt" +else + LIBQT="-l$qtlib" +fi + +if test $kde_qtver != 1; then + + AC_REQUIRE([AC_FIND_PNG]) + AC_REQUIRE([AC_FIND_JPEG]) + LIBQT="$LIBQT $LIBPNG $LIBJPEG" +fi + +if test $kde_qtver = 3; then + AC_REQUIRE([KDE_CHECK_LIBDL]) + LIBQT="$LIBQT $LIBDL" +fi + +AC_MSG_CHECKING([for Qt]) + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" +fi +ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO +qt_libraries="" +qt_includes="" +AC_ARG_WITH(qt-dir, + AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), + [ ac_qt_includes="$withval"/include + ac_qt_libraries="$withval"/lib${kdelibsuff} + ac_qt_bindir="$withval"/bin + ]) + +AC_ARG_WITH(qt-includes, + AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), + [ + ac_qt_includes="$withval" + ]) + +kde_qt_libs_given=no + +AC_ARG_WITH(qt-libraries, + AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), + [ ac_qt_libraries="$withval" + kde_qt_libs_given=yes + ]) + +AC_CACHE_VAL(ac_cv_have_qt, +[#try to guess Qt locations + +qt_incdirs="" +for dir in $kde_qt_dirs; do + qt_incdirs="$qt_incdirs $dir/include $dir" +done +qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" +if test ! "$ac_qt_includes" = "NO"; then + qt_incdirs="$ac_qt_includes $qt_incdirs" +fi + +if test "$kde_qtver" != "1"; then + kde_qt_header=qstyle.h +else + kde_qt_header=qglobal.h +fi + +AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) +ac_qt_includes="$qt_incdir" + +qt_libdirs="" +for dir in $kde_qt_dirs; do + qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir" +done +qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" +if test ! "$ac_qt_libraries" = "NO"; then + qt_libdir=$ac_qt_libraries +else + qt_libdirs="$ac_qt_libraries $qt_libdirs" + # if the Qt was given, the chance is too big that libqt.* doesn't exist + qt_libdir=NONE + for dir in $qt_libdirs; do + try="ls -1 $dir/${LIBQT_GLOB}" + if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done +fi +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIBQT="$LIBQT ${kde_int_qt}_incremental" + break + fi +done + +ac_qt_libraries="$qt_libdir" + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + +ac_cxxflags_safe="$CXXFLAGS" +ac_ldflags_safe="$LDFLAGS" +ac_libs_safe="$LIBS" + +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" +LIBS="$LIBS $LIBQT $KDE_MT_LIBS" + +KDE_PRINT_QT_PROGRAM + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC + ac_qt_libraries="NO" +fi +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +AC_LANG_RESTORE +if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then + ac_cv_have_qt="have_qt=no" + ac_qt_notfound="" + missing_qt_mt="" + if test "$ac_qt_includes" = NO; then + if test "$ac_qt_libraries" = NO; then + ac_qt_notfound="(headers and libraries)"; + else + ac_qt_notfound="(headers)"; + fi + else + if test "x$kde_use_qt_mt" = "xyes"; then + missing_qt_mt=" +Make sure that you have compiled Qt with thread support!" + ac_qt_notfound="(library $qtlib-mt)"; + else + ac_qt_notfound="(library $qtlib)"; + fi + fi + + AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! +For more details about this problem, look at the end of config.log.$missing_qt_mt]) +else + have_qt="yes" +fi +]) + +eval "$ac_cv_have_qt" + +if test "$have_qt" != yes; then + AC_MSG_RESULT([$have_qt]); +else + ac_cv_have_qt="have_qt=yes \ + ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" + AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) + + qt_libraries="$ac_qt_libraries" + qt_includes="$ac_qt_includes" +fi + +if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then + KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) +fi + +AC_SUBST(qt_libraries) +AC_SUBST(qt_includes) + +if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then + QT_INCLUDES="" +else + QT_INCLUDES="-I$qt_includes" + all_includes="$QT_INCLUDES $all_includes" +fi + +if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then + QT_LDFLAGS="" +else + QT_LDFLAGS="-L$qt_libraries" + all_libraries="$QT_LDFLAGS $all_libraries" +fi +test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" + +AC_SUBST(QT_INCLUDES) +AC_SUBST(QT_LDFLAGS) +AC_PATH_QT_MOC_UIC + +KDE_CHECK_QT_JPEG + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' +else +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' +fi +test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIB_QT="$LIB_QT ${kde_int_qt}_incremental" + break + fi +done + +AC_SUBST(LIB_QT) +AC_SUBST(LIB_QPE) + +AC_SUBST(kde_qtver) +]) + +AC_DEFUN([AC_PATH_QT], +[ +AC_PATH_QT_1_3 +]) + +AC_DEFUN([KDE_CHECK_UIC_PLUGINS], +[ +AC_REQUIRE([AC_PATH_QT_MOC_UIC]) + +if test x$ac_uic_supports_libpath = xyes; then + +AC_MSG_CHECKING([if UIC has KDE plugins available]) +AC_CACHE_VAL(kde_cv_uic_plugins, +[ +cat > actest.ui << EOF +<!DOCTYPE UI><UI version="3.0" stdsetdef="1"> +<class>NewConnectionDialog</class> +<widget class="QDialog"> + <widget class="KLineEdit"> + <property name="name"> + <cstring>testInput</cstring> + </property> + </widget> +</widget> +</UI> +EOF + + + +kde_cv_uic_plugins=no +kde_line="$UIC_PATH -L $kde_widgetdir" +if test x$ac_uic_supports_nounload = xyes; then + kde_line="$kde_line -nounload" +fi +kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" +if AC_TRY_EVAL(kde_line); then + # if you're trying to debug this check and think it's incorrect, + # better check your installation. The check _is_ correct - your + # installation is not. + if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then + kde_cv_uic_plugins=yes + fi +fi +rm -f actest.ui actest.cpp +]) + +AC_MSG_RESULT([$kde_cv_uic_plugins]) +if test "$kde_cv_uic_plugins" != yes; then + AC_MSG_ERROR([ +you need to install kdelibs first. + +If you did install kdelibs, then the Qt version that is picked up by +this configure is not the same version you used to compile kdelibs. +The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the +_same Qt version_, compiled with the _same compiler_ and the same Qt +configuration settings. +]) +fi +fi +]) + +AC_DEFUN([KDE_CHECK_FINAL], +[ + AC_ARG_ENABLE(final, + AC_HELP_STRING([--enable-final], + [build size optimized apps (experimental - needs lots of memory)]), + kde_use_final=$enableval, kde_use_final=no) + + if test "x$kde_use_final" = "xyes"; then + KDE_USE_FINAL_TRUE="" + KDE_USE_FINAL_FALSE="#" + else + KDE_USE_FINAL_TRUE="#" + KDE_USE_FINAL_FALSE="" + fi + AC_SUBST(KDE_USE_FINAL_TRUE) + AC_SUBST(KDE_USE_FINAL_FALSE) +]) + +AC_DEFUN([KDE_CHECK_CLOSURE], +[ + AC_ARG_ENABLE(closure, + AC_HELP_STRING([--enable-closure],[delay template instantiation]), + kde_use_closure=$enableval, kde_use_closure=no) + + KDE_NO_UNDEFINED="" + if test "x$kde_use_closure" = "xyes"; then + KDE_USE_CLOSURE_TRUE="" + KDE_USE_CLOSURE_FALSE="#" +# CXXFLAGS="$CXXFLAGS $REPO" + else + KDE_USE_CLOSURE_TRUE="#" + KDE_USE_CLOSURE_FALSE="" + KDE_NO_UNDEFINED="" + case $host in + *-*-linux-gnu) + KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], + [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], + [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], + [KDE_NO_UNDEFINED=""])], + [KDE_NO_UNDEFINED=""]) + ;; + esac + fi + AC_SUBST(KDE_USE_CLOSURE_TRUE) + AC_SUBST(KDE_USE_CLOSURE_FALSE) + AC_SUBST(KDE_NO_UNDEFINED) +]) + +dnl Check if the linker supports --enable-new-dtags and --as-needed +AC_DEFUN([KDE_CHECK_NEW_LDFLAGS], +[ + AC_ARG_ENABLE(new_ldflags, + AC_HELP_STRING([--enable-new-ldflags], + [enable the new linker flags]), + kde_use_new_ldflags=$enableval, + kde_use_new_ldflags=no) + + LDFLAGS_AS_NEEDED="" + LDFLAGS_NEW_DTAGS="" + if test "x$kde_use_new_ldflags" = "xyes"; then + LDFLAGS_NEW_DTAGS="" + KDE_CHECK_COMPILER_FLAG([Wl,--enable-new-dtags], + [LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"],) + + KDE_CHECK_COMPILER_FLAG([Wl,--as-needed], + [LDFLAGS_AS_NEEDED="-Wl,--as-needed"],) + fi + AC_SUBST(LDFLAGS_AS_NEEDED) + AC_SUBST(LDFLAGS_NEW_DTAGS) +]) + +AC_DEFUN([KDE_CHECK_NMCHECK], +[ + AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), + kde_use_nmcheck=$enableval, kde_use_nmcheck=no) + + if test "$kde_use_nmcheck" = "yes"; then + KDE_USE_NMCHECK_TRUE="" + KDE_USE_NMCHECK_FALSE="#" + else + KDE_USE_NMCHECK_TRUE="#" + KDE_USE_NMCHECK_FALSE="" + fi + AC_SUBST(KDE_USE_NMCHECK_TRUE) + AC_SUBST(KDE_USE_NMCHECK_FALSE) +]) + +AC_DEFUN([KDE_EXPAND_MAKEVAR], [ +savex=$exec_prefix +test "x$exec_prefix" = xNONE && exec_prefix=$prefix +tmp=$$2 +while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done +exec_prefix=$savex +]) + +dnl ------------------------------------------------------------------------ +dnl Now, the same with KDE +dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) +dnl and $(kde_includes) will be the kdehdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_BASE_PATH_KDE], +[ +AC_REQUIRE([KDE_CHECK_STL]) +AC_REQUIRE([AC_PATH_QT])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_CHECK_RPATH +AC_MSG_CHECKING([for KDE]) + +if test "${prefix}" != NONE; then + kde_includes=${includedir} + KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) + + kde_libraries=${libdir} + KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) + +else + ac_kde_includes= + ac_kde_libraries= + kde_libraries="" + kde_includes="" +fi + +AC_CACHE_VAL(ac_cv_have_kde, +[#try to guess kde locations + +if test "$kde_qtver" = 1; then + kde_check_header="ksock.h" + kde_check_lib="libkdecore.la" +else + kde_check_header="ksharedptr.h" + kde_check_lib="libkio.la" +fi + +if test -z "$1"; then + +kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" +test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" +kde_incdirs="$ac_kde_includes $kde_incdirs" +AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) +ac_kde_includes="$kde_incdir" + +if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then + AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE headers installed. This will fail. +So, check this please and use another prefix!]) +fi + +kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}" +test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs" +kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" +AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) +ac_kde_libraries="$kde_libdir" + +kde_widgetdir=NO +dnl this might be somewhere else +AC_FIND_FILE("kde3/plugins/designer/kdewidgets.la", $kde_libdirs, kde_widgetdir) + +if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then +AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE libraries installed. This will fail. +So, check this please and use another prefix!]) +fi + +if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then +AC_MSG_ERROR([ +I can't find the designer plugins. These are required and should have been installed +by kdelibs]) +fi + +if test -n "$kde_widgetdir"; then + kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" +fi + + +if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then + ac_cv_have_kde="have_kde=no" +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" +fi + +else dnl test -z $1, e.g. from kdelibs + + ac_cv_have_kde="have_kde=no" + +fi +])dnl + +eval "$ac_cv_have_kde" + +if test "$have_kde" != "yes"; then + if test "${prefix}" = NONE; then + ac_kde_prefix="$ac_default_prefix" + else + ac_kde_prefix="$prefix" + fi + if test "$exec_prefix" = NONE; then + ac_kde_exec_prefix="$ac_kde_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix]) + else + ac_kde_exec_prefix="$exec_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) + fi + + kde_libraries="${libdir}" + kde_includes="${includedir}" + +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" + AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) + + kde_libraries="$ac_kde_libraries" + kde_includes="$ac_kde_includes" +fi +AC_SUBST(kde_libraries) +AC_SUBST(kde_includes) + +if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then + KDE_INCLUDES="" +else + KDE_INCLUDES="-I$kde_includes" + all_includes="$KDE_INCLUDES $all_includes" +fi + +KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" + +KDE_LDFLAGS="-L$kde_libraries" +if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then + all_libraries="$KDE_LDFLAGS $all_libraries" +fi + +AC_SUBST(KDE_LDFLAGS) +AC_SUBST(KDE_INCLUDES) + +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +all_libraries="$all_libraries $USER_LDFLAGS" +all_includes="$all_includes $USER_INCLUDES" +AC_SUBST(all_includes) +AC_SUBST(all_libraries) + +if test -z "$1"; then +KDE_CHECK_UIC_PLUGINS +fi + +ac_kde_libraries="$kde_libdir" + +AC_SUBST(AUTODIRS) + + +]) + +AC_DEFUN([KDE_CHECK_EXTRA_LIBS], +[ +AC_MSG_CHECKING(for extra includes) +AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), + kde_use_extra_includes="$withval", + kde_use_extra_includes=NONE +) +kde_extra_includes= +if test -n "$kde_use_extra_includes" && \ + test "$kde_use_extra_includes" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_includes; do + kde_extra_includes="$kde_extra_includes $dir" + USER_INCLUDES="$USER_INCLUDES -I$dir" + done + IFS=$ac_save_ifs + kde_use_extra_includes="added" +else + kde_use_extra_includes="no" +fi +AC_SUBST(USER_INCLUDES) + +AC_MSG_RESULT($kde_use_extra_includes) + +kde_extra_libs= +AC_MSG_CHECKING(for extra libs) +AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), + kde_use_extra_libs=$withval, + kde_use_extra_libs=NONE +) +if test -n "$kde_use_extra_libs" && \ + test "$kde_use_extra_libs" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_libs; do + kde_extra_libs="$kde_extra_libs $dir" + KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" + USER_LDFLAGS="$USER_LDFLAGS -L$dir" + done + IFS=$ac_save_ifs + kde_use_extra_libs="added" +else + kde_use_extra_libs="no" +fi + +AC_SUBST(USER_LDFLAGS) + +AC_MSG_RESULT($kde_use_extra_libs) + +]) + +AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], +[ + AC_MSG_CHECKING([for KDE headers installed]) + AC_LANG_SAVE + AC_LANG_CPLUSPLUS +cat > conftest.$ac_ext <<EOF +#ifdef STDC_HEADERS +# include <stdlib.h> +#endif +#include <stdio.h> +#include "confdefs.h" +#include <kapp.h> + +int main() { + printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); + printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); + printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); + printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); + printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); + printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); + printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); + printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); + printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); + printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); + printf("kde_wallpaperdir=\\"%s\\"\n", + KApplication::kde_wallpaperdir().data()); + printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); + printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); + printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); + printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); + printf("kde_moduledir=\\"/tmp/dummy\\"\n"); + printf("kde_styledir=\\"/tmp/dummy\\"\n"); + printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); + printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); + printf("xdg_menudir=\\"/tmp/dummy\\"\n"); + printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); + printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); + return 0; + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$all_includes $CPPFLAGS" + if AC_TRY_EVAL(ac_compile); then + AC_MSG_RESULT(yes) + else + AC_MSG_ERROR([your system is not able to compile a small KDE application! +Check, if you installed the KDE header files correctly. +For more details about this problem, look at the end of config.log.]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_CHECK_KDEQTADDON], +[ +AC_MSG_CHECKING(for kde-qt-addon) +AC_CACHE_VAL(kde_cv_have_kdeqtaddon, +[ + kde_ldflags_safe="$LDFLAGS" + kde_libs_safe="$LIBS" + kde_cxxflags_safe="$CXXFLAGS" + + LIBS="-lkde-qt-addon $LIBQT $LIBS" + CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" + LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" + + AC_TRY_LINK([ + #include <qdom.h> + ], + [ + QDomDocument doc; + ], + kde_cv_have_kdeqtaddon=yes, + kde_cv_have_kdeqtaddon=no + ) + + LDFLAGS=$kde_ldflags_safe + LIBS=$kde_libs_safe + CXXFLAGS=$kde_cxxflags_safe +]) + +AC_MSG_RESULT($kde_cv_have_kdeqtaddon) + +if test "$kde_cv_have_kdeqtaddon" = "no"; then + AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. +It is a separate package (and CVS module) named kde-qt-addon.]) +fi +]) + +AC_DEFUN([KDE_CREATE_LIBS_ALIASES], +[ + AC_REQUIRE([KDE_MISC_TESTS]) + AC_REQUIRE([KDE_CHECK_LIBDL]) + AC_REQUIRE([K_PATH_X]) + +if test $kde_qtver = 3; then + case $host in + *cygwin*) lib_kded="-lkdeinit_kded" ;; + *) lib_kded="" ;; + esac + AC_SUBST(LIB_KDED, $lib_kded) + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KJS, "-lkjs") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KABC, "-lkabc") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") + AC_SUBST(LIB_KUTILS, "-lkutils") + AC_SUBST(LIB_KDEPIM, "-lkdepim") + AC_SUBST(LIB_KIMPROXY, "-lkimproxy") + AC_SUBST(LIB_KNEWSTUFF, "-lknewstuff") + AC_SUBST(LIB_KDNSSD, "-lkdnssd") + AC_SUBST(LIB_KUNITTEST, "-lkunittest") +# these are for backward compatibility + AC_SUBST(LIB_KSYCOCA, "-lkio") + AC_SUBST(LIB_KFILE, "-lkio") +elif test $kde_qtver = 2; then + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KSYCOCA, "-lksycoca") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KFILE, "-lkfile") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") +else + AC_SUBST(LIB_KDECORE, "-lkdecore -lXext $(LIB_QT)") + AC_SUBST(LIB_KDEUI, "-lkdeui $(LIB_KDECORE)") + AC_SUBST(LIB_KFM, "-lkfm $(LIB_KDECORE)") + AC_SUBST(LIB_KFILE, "-lkfile $(LIB_KFM) $(LIB_KDEUI)") + AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_KDECORE)") +fi +]) + +AC_DEFUN([AC_PATH_KDE], +[ + AC_BASE_PATH_KDE + AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), + [ + if test "$enableval" = "no"; + then ac_use_path_checking="default" + else ac_use_path_checking="" + fi + ], + [ + if test "$kde_qtver" = 1; + then ac_use_path_checking="" + else ac_use_path_checking="default" + fi + ] + ) + + AC_CREATE_KFSSTND($ac_use_path_checking) + + AC_SUBST_KFSSTND + KDE_CREATE_LIBS_ALIASES +]) + +dnl KDE_CHECK_FUNC_EXT(<func>, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) +AC_DEFUN([KDE_CHECK_FUNC_EXT], +[ +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(kde_cv_func_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +save_CXXFLAGS="$CXXFLAGS" +kde_safe_LIBS="$LIBS" +LIBS="$LIBS $X_EXTRA_LIBS" +if test "$GXX" = "yes"; then +CXXFLAGS="$CXXFLAGS -pedantic-errors" +fi +AC_TRY_COMPILE([ +$2 +], +[ +$3 +], +kde_cv_func_$1=yes, +kde_cv_func_$1=no) +CXXFLAGS="$save_CXXFLAGS" +LIBS="$kde_safe_LIBS" +AC_LANG_RESTORE +]) + +AC_MSG_RESULT($kde_cv_func_$1) + +AC_MSG_CHECKING([if $1 needs custom prototype]) +AC_CACHE_VAL(kde_cv_proto_$1, +[ +if test "x$kde_cv_func_$1" = xyes; then + kde_cv_proto_$1=no +else + case "$1" in + setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) + kde_cv_proto_$1="yes - in libkdefakes" + ;; + *) + kde_cv_proto_$1=unknown + ;; + esac +fi + +if test "x$kde_cv_proto_$1" = xunknown; then + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + kde_safe_libs=$LIBS + LIBS="$LIBS $X_EXTRA_LIBS" + AC_TRY_LINK([ +$2 + +extern "C" $4; +], +[ +$3 +], +[ kde_cv_func_$1=yes + kde_cv_proto_$1=yes ], + [kde_cv_proto_$1="$1 unavailable"] +) +LIBS=$kde_safe_libs +AC_LANG_RESTORE +fi +]) +AC_MSG_RESULT($kde_cv_proto_$1) + +if test "x$kde_cv_func_$1" = xyes; then + AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) + $6 +fi +if test "x$kde_cv_proto_$1" = xno; then + AC_DEFINE(HAVE_$5_PROTO, 1, + [Define if you have the $1 prototype]) +fi + +AH_VERBATIM([_HAVE_$5_PROTO], +[ +#if !defined(HAVE_$5_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +$4; +#ifdef __cplusplus +} +#endif +#endif +]) +]) + +AC_DEFUN([AC_CHECK_SETENV], +[ + KDE_CHECK_FUNC_EXT(setenv, [ +#include <stdlib.h> +], + [setenv("VAR", "VALUE", 1);], + [int setenv (const char *, const char *, int)], + [SETENV]) +]) + +AC_DEFUN([AC_CHECK_UNSETENV], +[ + KDE_CHECK_FUNC_EXT(unsetenv, [ +#include <stdlib.h> +], + [unsetenv("VAR");], + [void unsetenv (const char *)], + [UNSETENV]) +]) + +AC_DEFUN([AC_CHECK_GETDOMAINNAME], +[ + KDE_CHECK_FUNC_EXT(getdomainname, [ +#include <stdlib.h> +#include <unistd.h> +#include <netdb.h> +], + [ +char buffer[200]; +getdomainname(buffer, 200); +], + [#include <sys/types.h> + int getdomainname (char *, size_t)], + [GETDOMAINNAME]) +]) + +AC_DEFUN([AC_CHECK_GETHOSTNAME], +[ + KDE_CHECK_FUNC_EXT(gethostname, [ +#include <stdlib.h> +#include <unistd.h> +], + [ +char buffer[200]; +gethostname(buffer, 200); +], + [int gethostname (char *, unsigned int)], + [GETHOSTNAME]) +]) + +AC_DEFUN([AC_CHECK_USLEEP], +[ + KDE_CHECK_FUNC_EXT(usleep, [ +#include <unistd.h> +], + [ +usleep(200); +], + [int usleep (unsigned int)], + [USLEEP]) +]) + + +AC_DEFUN([AC_CHECK_RANDOM], +[ + KDE_CHECK_FUNC_EXT(random, [ +#include <stdlib.h> +], + [ +random(); +], + [long int random(void)], + [RANDOM]) + + KDE_CHECK_FUNC_EXT(srandom, [ +#include <stdlib.h> +], + [ +srandom(27); +], + [void srandom(unsigned int)], + [SRANDOM]) + +]) + +AC_DEFUN([AC_CHECK_INITGROUPS], +[ + KDE_CHECK_FUNC_EXT(initgroups, [ +#include <sys/types.h> +#include <unistd.h> +#include <grp.h> +], + [ +char buffer[200]; +initgroups(buffer, 27); +], + [int initgroups(const char *, gid_t)], + [INITGROUPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMPS], +[ + KDE_CHECK_FUNC_EXT(mkstemps, [ +#include <stdlib.h> +#include <unistd.h> +], + [ +mkstemps("/tmp/aaaXXXXXX", 6); +], + [int mkstemps(char *, int)], + [MKSTEMPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMP], +[ + KDE_CHECK_FUNC_EXT(mkstemp, [ +#include <stdlib.h> +#include <unistd.h> +], + [ +mkstemp("/tmp/aaaXXXXXX"); +], + [int mkstemp(char *)], + [MKSTEMP]) +]) + +AC_DEFUN([AC_CHECK_MKDTEMP], +[ + KDE_CHECK_FUNC_EXT(mkdtemp, [ +#include <stdlib.h> +#include <unistd.h> +], + [ +mkdtemp("/tmp/aaaXXXXXX"); +], + [char *mkdtemp(char *)], + [MKDTEMP]) +]) + + +AC_DEFUN([AC_CHECK_RES_INIT], +[ + AC_MSG_CHECKING([if res_init needs -lresolv]) + kde_libs_safe="$LIBS" + LIBS="$LIBS $X_EXTRA_LIBS -lresolv" + AC_TRY_LINK( + [ +#include <sys/types.h> +#include <netinet/in.h> +#include <arpa/nameser.h> +#include <resolv.h> + ], + [ + res_init(); + ], + [ + LIBRESOLV="-lresolv" + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) + ], + [ AC_MSG_RESULT(no) ] + ) + LIBS=$kde_libs_safe + AC_SUBST(LIBRESOLV) + + KDE_CHECK_FUNC_EXT(res_init, + [ +#include <sys/types.h> +#include <netinet/in.h> +#include <arpa/nameser.h> +#include <resolv.h> + ], + [res_init()], + [int res_init(void)], + [RES_INIT]) +]) + +AC_DEFUN([AC_CHECK_STRLCPY], +[ + KDE_CHECK_FUNC_EXT(strlcpy, [ +#include <string.h> +], +[ char buf[20]; + strlcpy(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcpy(char*, const char*, unsigned long)], + [STRLCPY]) +]) + +AC_DEFUN([AC_CHECK_STRLCAT], +[ + KDE_CHECK_FUNC_EXT(strlcat, [ +#include <string.h> +], +[ char buf[20]; + buf[0]='\0'; + strlcat(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcat(char*, const char*, unsigned long)], + [STRLCAT]) +]) + +AC_DEFUN([AC_CHECK_RES_QUERY], +[ + KDE_CHECK_FUNC_EXT(res_query, [ +#include <sys/types.h> +#include <netinet/in.h> +#include <arpa/nameser.h> +#include <resolv.h> +#include <netdb.h> +], +[ +res_query(NULL, 0, 0, NULL, 0); +], + [int res_query(const char *, int, int, unsigned char *, int)], + [RES_QUERY]) +]) + +AC_DEFUN([AC_CHECK_DN_SKIPNAME], +[ + KDE_CHECK_FUNC_EXT(dn_skipname, [ +#include <sys/types.h> +#include <netinet/in.h> +#include <arpa/nameser.h> +#include <resolv.h> +], +[ +dn_skipname (NULL, NULL); +], + [int dn_skipname (unsigned char *, unsigned char *)], + [DN_SKIPNAME]) +]) + + +AC_DEFUN([AC_FIND_GIF], + [AC_MSG_CHECKING([for giflib]) +AC_CACHE_VAL(ac_cv_lib_gif, +[ac_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" +else +LIBS="$all_libraries -lgif" +fi +AC_TRY_LINK(dnl +[ +#ifdef __cplusplus +extern "C" { +#endif +int GifLastError(void); +#ifdef __cplusplus +} +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +], + [return GifLastError();], + eval "ac_cv_lib_gif=yes", + eval "ac_cv_lib_gif=no") +LIBS="$ac_save_LIBS" +])dnl +if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) +else + AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) +fi +]) + +AC_DEFUN([KDE_FIND_JPEG_HELPER], +[ +AC_MSG_CHECKING([for libjpeg$2]) +AC_CACHE_VAL(ac_cv_lib_jpeg_$1, +[ +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" +ac_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[ +#ifdef __cplusplus +extern "C" { +#endif +void jpeg_CreateDecompress(); +#ifdef __cplusplus +} +#endif +], +[jpeg_CreateDecompress();], + eval "ac_cv_lib_jpeg_$1=-ljpeg$2", + eval "ac_cv_lib_jpeg_$1=no") +LIBS="$ac_save_LIBS" +CFLAGS="$ac_save_CFLAGS" +]) + +if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then + LIBJPEG="$ac_cv_lib_jpeg_$1" + AC_MSG_RESULT($ac_cv_lib_jpeg_$1) +else + AC_MSG_RESULT(no) + $3 +fi + +]) + +AC_DEFUN([AC_FIND_JPEG], +[ +dnl first look for libraries +KDE_FIND_JPEG_HELPER(6b, 6b, + KDE_FIND_JPEG_HELPER(normal, [], + [ + LIBJPEG= + ] + ) +) + +dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h +dnl requires system dependent includes loaded before it) +jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" +AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) +test "x$jpeg_incdir" = xNO && jpeg_incdir= + +dnl if headers _and_ libraries are missing, this is no error, and we +dnl continue with a warning (the user will get no jpeg support in khtml) +dnl if only one is missing, it means a configuration error, but we still +dnl only warn +if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then + AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) +else + if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then + AC_MSG_WARN([ +There is an installation error in jpeg support. You seem to have only one +of either the headers _or_ the libraries installed. You may need to either +provide correct --with-extra-... options, or the development package of +libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ +Disabling JPEG support. +]) + else + AC_MSG_WARN([libjpeg not found. disable JPEG support.]) + fi + jpeg_incdir= + LIBJPEG= +fi + +AC_SUBST(LIBJPEG) +AH_VERBATIM(_AC_CHECK_JPEG, +[/* + * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system + * headers and I'm too lazy to write a configure test as long as only + * unixware is related + */ +#ifdef _UNIXWARE +#define HAVE_BOOLEAN +#endif +]) +]) + +AC_DEFUN([KDE_CHECK_QT_JPEG], +[ +if test -n "$LIBJPEG"; then +AC_MSG_CHECKING([if Qt needs $LIBJPEG]) +AC_CACHE_VAL(kde_cv_qt_jpeg, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS $LIBQT" +LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` +ac_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[#include <qapplication.h>], + [ + int argc; + char** argv; + QApplication app(argc, argv);], + eval "kde_cv_qt_jpeg=no", + eval "kde_cv_qt_jpeg=yes") +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +fi +]) + +if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then + AC_MSG_RESULT(yes) + LIBJPEG_QT='$(LIBJPEG)' +else + AC_MSG_RESULT(no) + LIBJPEG_QT= +fi + +]) + +AC_DEFUN([AC_FIND_ZLIB], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for libz]) +AC_CACHE_VAL(ac_cv_lib_z, +[ +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#include<zlib.h> +], +[ + char buf[42]; + gzFile f = (gzFile) 0; + /* this would segfault.. but we only link, don't run */ + (void) gzgets(f, buf, sizeof(buf)); + + return (zlibVersion() == ZLIB_VERSION); +], + eval "ac_cv_lib_z='-lz'", + eval "ac_cv_lib_z=no") +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if test ! "$ac_cv_lib_z" = no; then + AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) + LIBZ="$ac_cv_lib_z" + AC_MSG_RESULT($ac_cv_lib_z) +else + AC_MSG_ERROR(not found. + Possibly configure picks up an outdated version + installed by XFree86. Remove it from your system. + + Check your installation and look into config.log) + LIBZ="" +fi +AC_SUBST(LIBZ) +]) + +AC_DEFUN([KDE_TRY_TIFFLIB], +[ +AC_MSG_CHECKING([for libtiff $1]) + +AC_CACHE_VAL(kde_cv_libtiff_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" +else +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" +fi +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl +[ +#include<tiffio.h> +], + [return (TIFFOpen( "", "r") == 0); ], +[ + kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" +], [ + kde_cv_libtiff_$1=no +]) + +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +]) + +if test "$kde_cv_libtiff_$1" = "no"; then + AC_MSG_RESULT(no) + LIBTIFF="" + $3 +else + LIBTIFF="$kde_cv_libtiff_$1" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) + $2 +fi + +]) + +AC_DEFUN([AC_FIND_TIFF], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +KDE_TRY_TIFFLIB(tiff, [], + KDE_TRY_TIFFLIB(tiff34)) + +AC_SUBST(LIBTIFF) +]) + +AC_DEFUN([KDE_FIND_LIBEXR], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_CACHE_VAL(ac_cv_libexr, +[ + if test -z "$PKG_CONFIG"; then + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + fi + + AC_MSG_CHECKING([for OpenEXR libraries]) + + if test "$PKG_CONFIG" = "no" ; then + AC_MSG_RESULT(no) + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + if !(`$PKG_CONFIG --exists OpenEXR`) ; then + AC_MSG_RESULT(no) + EXRSTATUS=no + else + if !(`$PKG_CONFIG --atleast-version="1.1.1" OpenEXR`) ; then + AC_MSG_RESULT(no) + EXRSTATUS=old + else + kde_save_LIBS="$LIBS" + LIBS="$LIBS $all_libraries $USER_LDFLAGS `pkg-config --libs OpenEXR` $LIBZ" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_CXXFLAGS="$CXXFLAGS" + EXR_FLAGS=`$PKG_CONFIG --cflags OpenEXR` + CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES $EXR_FLAGS" + + AC_TRY_LINK(dnl + [ + #include <ImfRgbaFile.h> + ], + [ + using namespace Imf; + RgbaInputFile file ("dummy"); + return 0; + ], + eval "ac_cv_libexr='`pkg-config --libs OpenEXR`'", + eval "ac_cv_libexr=no" + ) + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + if eval "test ! \"`echo $ac_cv_libexr`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_EXR, 1, [Define if you have OpenEXR]) + LIB_EXR="$ac_cv_libexr" + AC_MSG_RESULT($ac_cv_libexr) + else + AC_MSG_RESULT(no) + LIB_EXR="" + fi + fi + fi + fi + AC_SUBST(LIB_EXR) + AC_SUBST(EXR_FLAGS) +]) + + + +AC_DEFUN([AC_FIND_PNG], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_MSG_CHECKING([for libpng]) +AC_CACHE_VAL(ac_cv_lib_png, +[ +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" +else +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" +fi +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include<png.h> + ], + [ + png_structp png_ptr = png_create_read_struct( /* image ptr */ + PNG_LIBPNG_VER_STRING, 0, 0, 0 ); + return( png_ptr != 0 ); + ], + eval "ac_cv_lib_png='-lpng $LIBZ -lm'", + eval "ac_cv_lib_png=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) + LIBPNG="$ac_cv_lib_png" + AC_SUBST(LIBPNG) + AC_MSG_RESULT($ac_cv_lib_png) +else + AC_MSG_RESULT(no) + LIBPNG="" + AC_SUBST(LIBPNG) +fi +]) + + +AC_DEFUN([AC_FIND_JASPER], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_MSG_CHECKING([for jasper]) +AC_CACHE_VAL(ac_cv_jasper, +[ +kde_save_LIBS="$LIBS" +LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include<jasper/jasper.h> + ], + [ + return( jas_init() ); + ], + eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", + eval "ac_cv_jasper=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) + LIB_JASPER="$ac_cv_jasper" + AC_MSG_RESULT($ac_cv_jasper) +else + AC_MSG_RESULT(no) + LIB_JASPER="" +fi +AC_SUBST(LIB_JASPER) +]) + +AC_DEFUN([AC_CHECK_BOOL], +[ + AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) +]) + +AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], +[ +AC_MSG_CHECKING(if you need GNU extensions) +AC_CACHE_VAL(ac_cv_gnu_extensions, +[ +cat > conftest.c << EOF +#include <features.h> + +#ifdef __GNU_LIBRARY__ +yes +#endif +EOF + +if (eval "$ac_cpp conftest.c") 2>&5 | + egrep "yes" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_gnu_extensions=yes +else + ac_cv_gnu_extensions=no +fi +]) + +AC_MSG_RESULT($ac_cv_gnu_extensions) +if test "$ac_cv_gnu_extensions" = "yes"; then + AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) +fi +]) + +AC_DEFUN([KDE_CHECK_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CXX supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) + CXXFLAGS="$save_CXXFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + +AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CC supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_C + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) + CFLAGS="$save_CFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + + +dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables +dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) +dnl it's all white-space separated +AC_DEFUN([AC_REMOVE_FORBIDDEN], +[ __val=$$1 + __forbid=" $2 " + if test -n "$__val"; then + __new="" + ac_save_IFS=$IFS + IFS=" " + for i in $__val; do + case "$__forbid" in + *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; + *) # Careful to not add spaces, where there were none, because otherwise + # libtool gets confused, if we change e.g. CXX + if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; + esac + done + IFS=$ac_save_IFS + $1=$__new + fi +]) + + +AC_DEFUN([KDE_CHECK_FOR_BAD_COMPILER], +[ + AC_MSG_CHECKING([whether $CC is blacklisted]) + + dnl In theory we have tu run this test against $CC and $CXX + dnl in C and in C++ mode, because its perfectly legal for + dnl the user to mix compiler versions, since C has a defined + dnl ABI. + dnl + dnl For now, we assume the user is not on crack. + + AC_TRY_COMPILE([ +#ifdef __GNUC__ +#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0 +choke me +#endif +#endif +], , + kde_bad_compiler=no, + kde_bad_compiler=yes +) + + AC_MSG_RESULT($kde_bad_compiler) + +if test "$kde_bad_compiler" = "yes"; then + AC_MSG_ERROR([ + +This particular compiler version is blacklisted because it +is known to miscompile KDE. Please use a newer version, or +if that is not yet available, choose an older version. + +Please do not report a bug or bother us reporting this +configure error. We know about it, and we introduced +it by intention to avoid untraceable bugs or crashes in KDE. + +]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_FOR_OPT_NOINLINE_MATCH], +[ + AC_CACHE_CHECK([whether system headers can cope with -O2 -fno-inline], + kde_cv_opt_noinline_match, + [ + kde_cv_opt_noinline_match=irrelevant + dnl if we don't use both -O2 and -fno-inline, this check is moot + if echo "$CFLAGS" | grep -e -O2 >/dev/null 2>/dev/null \ + && echo "$CFLAGS" | grep -e -fno-inline >/dev/null 2>/dev/null ; then + + ac_cflags_save="$CFLAGS" + CFLAGS="$CFLAGS -D_USE_GNU" + + AC_TRY_LINK([ + #include <string.h> +], [ const char *pt, *et; + et = __extension__ ({ char __a0, __a1, __a2; (__builtin_constant_p ( ";," ) && ((size_t)(const void *)(( ";," )+ 1) - (size_t)(const void *)( ";," ) == 1) ? ((__a0 =((__const char *) ( ";," ))[0], __a0 == '\0') ? ((void) ( pt ),((void *)0) ) : ((__a1 = ((__const char *) ( ";," ))[1], __a1== '\0') ? (__extension__ (__builtin_constant_p ( __a0 ) && ( __a0 ) == '\0' ? (char *) __rawmemchr ( pt , __a0) : strchr( pt , __a0 ))) : ((__a2 = ((__const char *) ( ";," ))[2], __a2 == '\0') ? __strpbrk_c2 ( pt , __a0, __a1) :(((__const char *) ( ";," ))[3] == '\0' ? __strpbrk_c3 ( pt ,__a0, __a1, __a2): strpbrk ( pt , ";," ))))) : strpbrk ( pt , ";," )); }) ; +], + kde_cv_opt_noinline_match=yes, + kde_cv_opt_noinline_match=no + ) + + CFLAGS="$ac_cflags_save" + fi + ]) +]) + + +dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given +AC_DEFUN([AC_VALIDIFY_CXXFLAGS], +[dnl +if test "x$kde_use_qt_emb" != "xyes"; then + AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) +else + AC_REMOVE_FORBIDDEN(CXX, [-rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) +fi +]) + +AC_DEFUN([AC_CHECK_COMPILERS], +[ + AC_ARG_ENABLE(debug, + AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), + [ + case $enableval in + yes) + kde_use_debug_code="yes" + kde_use_debug_define=no + ;; + full) + kde_use_debug_code="full" + kde_use_debug_define=no + ;; + *) + kde_use_debug_code="no" + kde_use_debug_define=yes + ;; + esac + ], + [kde_use_debug_code="no" + kde_use_debug_define=no + ]) + + dnl Just for configure --help + AC_ARG_ENABLE(dummyoption, + AC_HELP_STRING([--disable-debug], + [disables debug output and debug symbols [default=no]]), + [],[]) + + AC_ARG_ENABLE(strict, + AC_HELP_STRING([--enable-strict], + [compiles with strict compiler options (may not work!)]), + [ + if test $enableval = "no"; then + kde_use_strict_options="no" + else + kde_use_strict_options="yes" + fi + ], [kde_use_strict_options="no"]) + + AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similar]), + [ + if test $enableval = "no"; then + kde_use_warnings="no" + else + kde_use_warnings="yes" + fi + ], [kde_use_warnings="yes"]) + + dnl enable warnings for debug build + if test "$kde_use_debug_code" != "no"; then + kde_use_warnings=yes + fi + + AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), + [kde_use_profiling=$enableval], + [kde_use_profiling="no"] + ) + + dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS + CFLAGS=" $CFLAGS" + + AC_PROG_CC + + AC_PROG_CPP + + if test "$GCC" = "yes"; then + if test "$kde_use_debug_code" != "no"; then + if test $kde_use_debug_code = "full"; then + CFLAGS="-g3 -fno-inline $CFLAGS" + else + CFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CFLAGS" + fi + else + CFLAGS="-O2 $CFLAGS" + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CFLAGS="-DNDEBUG $CFLAGS" + fi + + + case "$host" in + *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; + *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; + esac + + if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then + LDFLAGS="" + fi + + CXXFLAGS=" $CXXFLAGS" + + AC_PROG_CXX + + KDE_CHECK_FOR_BAD_COMPILER + + if test "$GXX" = "yes" || test "$CXX" = "KCC"; then + if test "$kde_use_debug_code" != "no"; then + if test "$CXX" = "KCC"; then + CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" + else + if test "$kde_use_debug_code" = "full"; then + CXXFLAGS="-g3 -fno-inline $CXXFLAGS" + else + CXXFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CXXFLAGS" + fi + fi + KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) + + dnl convenience compiler flags + KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) + AC_SUBST(WOVERLOADED_VIRTUAL) + else + if test "$CXX" = "KCC"; then + CXXFLAGS="+K3 $CXXFLAGS" + else + CXXFLAGS="-O2 $CXXFLAGS" + fi + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" + fi + + if test "$kde_use_profiling" = "yes"; then + KDE_CHECK_COMPILER_FLAG(pg, + [ + CFLAGS="-pg $CFLAGS" + CXXFLAGS="-pg $CXXFLAGS" + ]) + fi + + if test "$kde_use_warnings" = "yes"; then + if test "$GCC" = "yes"; then + CXXFLAGS="-Wall -W -Wpointer-arith $CXXFLAGS" + case $host in + *-*-linux-gnu) + CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" + CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS" + KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) + KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) + ;; + esac + KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) + KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) + dnl ### FIXME: revert for KDE 4 + KDE_CHECK_COMPILER_FLAG(Wno-non-virtual-dtor,[CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"]) + fi + fi + + if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then + CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" + fi + + AC_ARG_ENABLE(pch, + AC_HELP_STRING([--enable-pch], + [enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) [default=no]]), + [ kde_use_pch=$enableval ],[ kde_use_pch=no ]) + + HAVE_GCC_VISIBILITY=0 + AC_SUBST([HAVE_GCC_VISIBILITY]) + + if test "$GXX" = "yes"; then + gcc_no_reorder_blocks=NO + KDE_CHECK_COMPILER_FLAG(fno-reorder-blocks,[gcc_no_reorder_blocks=YES]) + if test $kde_use_debug_code != "no" && \ + test $kde_use_debug_code != "full" && \ + test "YES" = "$gcc_no_reorder_blocks" ; then + CXXFLAGS="$CXXFLAGS -fno-reorder-blocks" + CFLAGS="$CFLAGS -fno-reorder-blocks" + fi + KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) + KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) + KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) + KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) + ENABLE_PERMISSIVE_FLAG="-fpermissive" + + if test "$kde_use_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c header files) + echo >conftest.h + if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + if test "$kde_gcc_supports_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c++ header files) + if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + fi + rm -f conftest.h conftest.h.gch + fi + + KDE_CHECK_FOR_OPT_NOINLINE_MATCH + if test "x$kde_cv_opt_noinline_match" = "xno" ; then + CFLAGS="`echo "$CFLAGS" | sed "s/ -fno-inline//"`" + fi + fi + AM_CONDITIONAL(unsermake_enable_pch, test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes") + if test "$CXX" = "KCC"; then + dnl unfortunately we currently cannot disable exception support in KCC + dnl because doing so is binary incompatible and Qt by default links with exceptions :-( + dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) + dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) + + if test "$kde_use_pch" = "yes"; then + dnl TODO: support --pch-dir! + KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) + dnl the below works (but the dir must exist), but it's + dnl useless for a whole package. + dnl The are precompiled headers for each source file, so when compiling + dnl from scratch, it doesn't make a difference, and they take up + dnl around ~5Mb _per_ sourcefile. + dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, + dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) + fi + dnl this flag controls inlining. by default KCC inlines in optimisation mode + dnl all implementations that are defined inside the class {} declaration. + dnl because of templates-compatibility with broken gcc compilers, this + dnl can cause excessive inlining. This flag limits it to a sane level + KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) + KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) + KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) + KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) + dnl Some source files are shared between multiple executables + dnl (or libraries) and some of those need template instantiations. + dnl In that case KCC needs to compile those sources with + dnl --one_instantiation_per_object. To make it easy for us we compile + dnl _all_ objects with that flag (--one_per is a shorthand). + KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) + fi + AC_SUBST(USE_EXCEPTIONS) + dnl obsolete macro - provided to keep things going + USE_RTTI= + AC_SUBST(USE_RTTI) + + case "$host" in + *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; + *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; + *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; + *-*-solaris*) + if test "$GXX" = yes; then + libstdcpp=`$CXX -print-file-name=libstdc++.so` + if test ! -f $libstdcpp; then + AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) + fi + fi + ;; + esac + + AC_VALIDIFY_CXXFLAGS + + AC_PROG_CXXCPP + + if test "$GCC" = yes; then + NOOPT_CFLAGS=-O0 + fi + KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) + + AC_ARG_ENABLE(coverage, + AC_HELP_STRING([--enable-coverage],[use gcc coverage testing]), [ + if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="-lgcc" + elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="" + else + AC_MSG_ERROR([coverage with your compiler is not supported]) + fi + CFLAGS="$CFLAGS $ac_coverage_compiler" + CXXFLAGS="$CXXFLAGS $ac_coverage_compiler" + LDFLAGS="$LDFLAGS $ac_coverage_linker" + ]) + + AC_SUBST(NOOPT_CXXFLAGS) + AC_SUBST(NOOPT_CFLAGS) + AC_SUBST(ENABLE_PERMISSIVE_FLAG) + + KDE_CHECK_NEW_LDFLAGS + KDE_CHECK_FINAL + KDE_CHECK_CLOSURE + KDE_CHECK_NMCHECK + + ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) +]) + +AC_DEFUN([KDE_CHECK_VISIBILITY_GCC_BUG], + [ + AC_CACHE_CHECK([for gcc -fvisibility-inlines-hidden bug], kde_cv_val_gcc_visibility_bug, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIC -fvisibility-inlines-hidden -O0" + LDFLAGS="$LDFLAGS -shared -fPIC" + + AC_TRY_LINK( + [ + /* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 */ + #include <string> + int some_function( void ) __attribute__ ((visibility("default"))); + int some_function( void ) + { + std::string s("blafasel"); + return 0; + } + ], [/* elvis is alive */], + kde_cv_val_gcc_visibility_bug=no, kde_cv_val_gcc_visibility_bug=yes) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_cv_val_gcc_visibility_bug = xno; then + CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden" + fi + ] +) + +AC_DEFUN([KDE_ENABLE_HIDDEN_VISIBILITY], +[ + AC_BEFORE([AC_PATH_QT_1_3], [KDE_ENABLE_HIDDEN_VISIBILITY]) + + AC_MSG_CHECKING([grepping for visibility push/pop in headers]) + + if test "x$GXX" = "xyes"; then + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_EGREP_CPP( + [GCC visibility push], + [ #include <exception> + ], + [ + AC_MSG_RESULT(yes) + kde_stdc_visibility_patched=yes ], + [ + AC_MSG_RESULT(no) + AC_MSG_WARN([Your libstdc++ doesn't appear to be patched for + visibility support. Disabling -fvisibility=hidden]) + + kde_stdc_visibility_patched=no ]) + + AC_LANG_RESTORE + + kde_have_gcc_visibility=no + KDE_CHECK_COMPILER_FLAG(fvisibility=hidden, + [ + kde_have_gcc_visibility=yes + dnl the whole toolchain is just a mess, gcc is just too buggy + dnl to handle STL with visibility enabled. Lets reconsider + dnl when gcc 4.2 is out or when things get fixed in the compiler. + dnl Contact mueller@kde.org for details. + AC_ARG_ENABLE(gcc-hidden-visibility, + AC_HELP_STRING([--enable-gcc-hidden-visibility],[toolchain hidden visibility [default=no]]), + [kde_have_gcc_visibility=$enableval], + [kde_have_gcc_visibility=no]) + + AC_CACHE_CHECK([if Qt is patched for -fvisibility], kde_cv_val_qt_gcc_visibility_patched, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + CXXFLAGS="$CXXFLAGS $all_includes" + + AC_TRY_COMPILE( + [ +#include <qglobal.h> +#if Q_EXPORT - 0 != 0 +/* if this compiles, then Q_EXPORT is undefined */ +/* if Q_EXPORT is nonempty, this will break compilation */ +#endif + ], [/* elvis is alive */], + kde_cv_val_qt_gcc_visibility_patched=no, kde_cv_val_qt_gcc_visibility_patched=yes) + + CXXFLAGS=$safe_CXXFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_have_gcc_visibility = "xyes" && test x$kde_stdc_visibility_patched = "xyes" && test x$kde_cv_val_qt_gcc_visibility_patched = "xyes"; then + CXXFLAGS="$CXXFLAGS -fvisibility=hidden" + KDE_CHECK_VISIBILITY_GCC_BUG + HAVE_GCC_VISIBILITY=1 + AC_DEFINE_UNQUOTED(__KDE_HAVE_GCC_VISIBILITY, "$HAVE_GCC_VISIBILITY", [define to 1 if -fvisibility is supported]) + fi + ]) + fi +]) + +AC_DEFUN([KDE_ADD_DEPENDENCIES], +[ + [A]M_DEPENDENCIES(CC) + [A]M_DEPENDENCIES(CXX) +]) + +dnl just a wrapper to clean up configure.in +AC_DEFUN([KDE_PROG_LIBTOOL], +[ +AC_REQUIRE([AC_CHECK_COMPILERS]) +AC_REQUIRE([AC_ENABLE_SHARED]) +AC_REQUIRE([AC_ENABLE_STATIC]) + +AC_REQUIRE([AC_LIBTOOL_DLOPEN]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_OBJEXT +AC_EXEEXT + +AM_PROG_LIBTOOL +AC_LIBTOOL_CXX + +LIBTOOL_SHELL="/bin/sh ./libtool" +# LIBTOOL="$LIBTOOL --silent" +KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" +AC_SUBST(KDE_PLUGIN) + +# This hack ensures that libtool creates shared libs for kunittest plugins. By default check_LTLIBRARIES makes static libs. +KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)" +AC_SUBST(KDE_CHECK_PLUGIN) + +# we patch configure quite some so we better keep that consistent for incremental runs +AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') +]) + +AC_DEFUN([KDE_CHECK_LIB64], +[ + AC_ARG_ENABLE(libsuffix, + AC_HELP_STRING([--enable-libsuffix], + [/lib directory suffix (64,32,none,auto[=default])]), + kdelibsuff=$enableval, kdelibsuff="auto") + + if test "$kdelibsuff" = "auto"; then + +cat > conftest.c << EOF +#include <stdio.h> +int main() { + return 0; +} +EOF + kdelibsuff=`$CC conftest.c -o conftest.out; ldd conftest.out |sed -ne '/libc.so/{ + s,.*/lib\([[^\/]]*\)/.*,\1, + p +}'` + rm -rf conftest.* + fi + + if test "$kdelibsuff" = "no" || test "$kdelibsuff" = "none"; then + kdelibsuff= + fi + if test -z "$kdelibsuff"; then + AC_MSG_RESULT([not using lib directory suffix]) + AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) + else + if test "$libdir" = '${exec_prefix}/lib'; then + libdir="$libdir${kdelibsuff}" + AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms + fi + AC_DEFINE_UNQUOTED(KDELIBSUFF, ["${kdelibsuff}"], Suffix for lib directories) + AC_MSG_RESULT([using lib directory suffix $kdelibsuff]) + fi +]) + +AC_DEFUN([KDE_CHECK_TYPES], +[ AC_CHECK_SIZEOF(int, 4)dnl + AC_CHECK_SIZEOF(short)dnl + AC_CHECK_SIZEOF(long, 4)dnl + AC_CHECK_SIZEOF(char *, 4)dnl +])dnl + +dnl Not used - kept for compat only? +AC_DEFUN([KDE_DO_IT_ALL], +[ +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM +AM_INIT_AUTOMAKE($1, $2) +AM_DISABLE_LIBRARIES +AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) +AC_CHECK_COMPILERS +KDE_PROG_LIBTOOL +AM_KDE_WITH_NLS +AC_PATH_KDE +]) + +AC_DEFUN([AC_CHECK_RPATH], +[ +AC_MSG_CHECKING(for rpath) +AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), + USE_RPATH=$enableval, USE_RPATH=yes) + +if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then + + KDE_RPATH="-R \$(libdir)" + + if test "$kde_libraries" != "$libdir"; then + KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)" + fi + + if test -n "$qt_libraries"; then + KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" + fi + dnl $x_libraries is set to /usr/lib in case + if test -n "$X_LDFLAGS"; then + X_RPATH="-R \$(x_libraries)" + KDE_RPATH="$KDE_RPATH $X_RPATH" + fi + if test -n "$KDE_EXTRA_RPATH"; then + KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" + fi +fi +AC_SUBST(KDE_EXTRA_RPATH) +AC_SUBST(KDE_RPATH) +AC_SUBST(X_RPATH) +AC_MSG_RESULT($USE_RPATH) +]) + +dnl Check for the type of the third argument of getsockname +AC_DEFUN([AC_CHECK_SOCKLEN_T], +[ + AC_MSG_CHECKING(for socklen_t) + AC_CACHE_VAL(kde_cv_socklen_t, + [ + AC_LANG_PUSH(C++) + kde_cv_socklen_t=no + AC_TRY_COMPILE([ + #include <sys/types.h> + #include <sys/socket.h> + ], + [ + socklen_t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t=yes + kde_cv_socklen_t_equiv=socklen_t + ]) + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t) + if test $kde_cv_socklen_t = no; then + AC_MSG_CHECKING([for socklen_t equivalent for socket functions]) + AC_CACHE_VAL(kde_cv_socklen_t_equiv, + [ + kde_cv_socklen_t_equiv=int + AC_LANG_PUSH(C++) + for t in int size_t unsigned long "unsigned long"; do + AC_TRY_COMPILE([ + #include <sys/types.h> + #include <sys/socket.h> + ], + [ + $t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t_equiv="$t" + break + ]) + done + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t_equiv) + fi + AC_DEFINE_UNQUOTED(kde_socklen_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined]) + AC_DEFINE_UNQUOTED(ksize_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined (deprecated, use kde_socklen_t)]) +]) + +dnl This is a merge of some macros out of the gettext aclocal.m4 +dnl since we don't need anything, I took the things we need +dnl the copyright for them is: +dnl > +dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +dnl This Makefile.in is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. +dnl > +dnl for this file it is relicensed under LGPL + +AC_DEFUN([AM_KDE_WITH_NLS], + [ + dnl If we use NLS figure out what method + + AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, + [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then + AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + MSGFMT=$GMSGFMT + AC_SUBST(GMSGFMT) + AC_SUBST(MSGFMT) + + AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + AC_MSG_RESULT( + [found xgettext programs is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + fi + AC_SUBST(XGETTEXT) + + ]) + +# Search path for a program which passes the given test. +# Ulrich Drepper <drepper@cygnus.com>, 1996. + +# serial 1 +# Stephan Kulow: I appended a _KDE against name conflicts + +dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], +[# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + /*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in ifelse([$5], , $PATH, [$5]); do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test -n "[$]$1"; then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) + + +# Check whether LC_MESSAGES is available in <locale.h>. +# Ulrich Drepper <drepper@cygnus.com>, 1995. + +# serial 1 + +AC_DEFUN([AM_LC_MESSAGES], + [if test $ac_cv_header_locale_h = yes; then + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) + fi + fi]) + +dnl From Jim Meyering. +dnl FIXME: migrate into libit. + +AC_DEFUN([AM_FUNC_OBSTACK], +[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, + [AC_TRY_LINK([#include "obstack.h"], + [struct obstack *mem;obstack_free(mem,(char *) 0)], + am_cv_func_obstack=yes, + am_cv_func_obstack=no)]) + if test $am_cv_func_obstack = yes; then + AC_DEFINE(HAVE_OBSTACK) + else + LIBOBJS="$LIBOBJS obstack.o" + fi +]) + +dnl From Jim Meyering. Use this if you use the GNU error.[ch]. +dnl FIXME: Migrate into libit + +AC_DEFUN([AM_FUNC_ERROR_AT_LINE], +[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, + [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], + am_cv_lib_error_at_line=yes, + am_cv_lib_error_at_line=no)]) + if test $am_cv_lib_error_at_line = no; then + LIBOBJS="$LIBOBJS error.o" + fi + AC_SUBST(LIBOBJS)dnl +]) + +# Macro to add for using GNU gettext. +# Ulrich Drepper <drepper@cygnus.com>, 1995. + +# serial 1 +# Stephan Kulow: I put a KDE in it to avoid name conflicts + +AC_DEFUN([AM_KDE_GNU_GETTEXT], + [AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([AM_KDE_WITH_NLS])dnl + AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) + AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ +__argz_count __argz_stringify __argz_next]) + + AC_MSG_CHECKING(for stpcpy) + AC_CACHE_VAL(kde_cv_func_stpcpy, + [ + kde_safe_cxxflags=$CXXFLAGS + CXXFLAGS="-Werror" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_COMPILE([ + #include <string.h> + ], + [ + char buffer[200]; + stpcpy(buffer, buffer); + ], + kde_cv_func_stpcpy=yes, + kde_cv_func_stpcpy=no) + AC_LANG_RESTORE + CXXFLAGS=$kde_safe_cxxflags + ]) + AC_MSG_RESULT($kde_cv_func_stpcpy) + if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then + AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) + fi + + AM_LC_MESSAGES + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + AC_MSG_CHECKING(for catalogs to be installed) + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + AC_MSG_RESULT($LINGUAS) + fi + + dnl Construct list of names of catalog files to be constructed. + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + ]) + +AC_DEFUN([AC_HAVE_XPM], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= + test -z "$XPM_INCLUDE" && XPM_INCLUDE= + + AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), + xpm_test=$withval, xpm_test="yes") + if test "x$xpm_test" = xno; then + ac_cv_have_xpm=no + else + AC_MSG_CHECKING(for XPM) + AC_CACHE_VAL(ac_cv_have_xpm, + [ + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" + else + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" + fi + CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" + test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" + AC_TRY_LINK([#include <X11/xpm.h>],[], + ac_cv_have_xpm="yes",ac_cv_have_xpm="no") + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + ])dnl + + if test "$ac_cv_have_xpm" = no; then + AC_MSG_RESULT(no) + XPM_LDFLAGS="" + XPMINC="" + $2 + else + AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) + if test "$XPM_LDFLAGS" = ""; then + XPMLIB='-lXpm $(LIB_X11)' + else + XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' + fi + if test "$XPM_INCLUDE" = ""; then + XPMINC="" + else + XPMINC="-I$XPM_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + AC_SUBST(XPMINC) + AC_SUBST(XPMLIB) +]) + +AC_DEFUN([AC_HAVE_DPMS], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= + test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= + DPMS_LIB= + + AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), + dpms_test=$withval, dpms_test="yes") + if test "x$dpms_test" = xno; then + ac_cv_have_dpms=no + else + AC_MSG_CHECKING(for DPMS) + dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. + dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". + AC_CACHE_VAL(ac_cv_have_dpms, + [ + if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then + AC_MSG_RESULT(no) + ac_cv_have_dpms="no" + else + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + ac_save_libs="$LIBS" + LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries" + LIBS="-lX11 -lXext $LIBSOCKET" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AC_TRY_LINK([ + #include <X11/Xproto.h> + #include <X11/X.h> + #include <X11/Xlib.h> + #include <X11/extensions/dpms.h> + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + ac_cv_have_dpms="yes", [ + LIBS="-lXdpms $LIBS" + AC_TRY_LINK([ + #include <X11/Xproto.h> + #include <X11/X.h> + #include <X11/Xlib.h> + #include <X11/extensions/dpms.h> + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + [ + ac_cv_have_dpms="-lXdpms" + ],ac_cv_have_dpms="no") + ]) + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + LIBS="$ac_save_libs" + fi + ])dnl + + if test "$ac_cv_have_dpms" = no; then + AC_MSG_RESULT(no) + DPMS_LDFLAGS="" + DPMSINC="" + $2 + else + AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) + if test "$ac_cv_have_dpms" = "-lXdpms"; then + DPMS_LIB="-lXdpms" + fi + if test "$DPMS_LDFLAGS" = ""; then + DPMSLIB="$DPMS_LIB "'$(LIB_X11)' + else + DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' + fi + if test "$DPMS_INCLUDE" = ""; then + DPMSINC="" + else + DPMSINC="-I$DPMS_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + ac_save_cflags="$CFLAGS" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, + [Define if you have the DPMSCapable prototype in <X11/extensions/dpms.h>]) + AC_CHECK_DECL(DPMSCapable, + AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, + [#include <X11/Xlib.h> + #include <X11/extensions/dpms.h>]) + AH_TEMPLATE(HAVE_DPMSINFO_PROTO, + [Define if you have the DPMSInfo prototype in <X11/extensions/dpms.h>]) + AC_CHECK_DECL(DPMSInfo, + AC_DEFINE(HAVE_DPMSINFO_PROTO),, + [#include <X11/Xlib.h> + #include <X11/extensions/dpms.h>]) + CFLAGS="$ac_save_cflags" + AC_SUBST(DPMSINC) + AC_SUBST(DPMSLIB) +]) + +AC_DEFUN([AC_HAVE_GL], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$GL_LDFLAGS" && GL_LDFLAGS= + test -z "$GL_INCLUDE" && GL_INCLUDE= + + AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), + gl_test=$withval, gl_test="yes") + if test "x$kde_use_qt_emb" = "xyes"; then + # GL and Qt Embedded is a no-go for now. + ac_cv_have_gl=no + elif test "x$gl_test" = xno; then + ac_cv_have_gl=no + else + AC_MSG_CHECKING(for GL) + AC_CACHE_VAL(ac_cv_have_gl, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_ldflags=$LDFLAGS + ac_save_cxxflags=$CXXFLAGS + ac_save_libs=$LIBS + LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries" + LIBS="$LIBS -lGL -lGLU" + test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LIBS="$LIBS -lX11" + LIBS="$LIBS $LIB_XEXT -lm $LIBSOCKET" + CXXFLAGS="$CFLAGS $X_INCLUDES" + test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" + AC_TRY_LINK([#include <GL/gl.h> +#include <GL/glu.h> +], [], + ac_cv_have_gl="yes", ac_cv_have_gl="no") + AC_LANG_RESTORE + LDFLAGS=$ac_save_ldflags + CXXFLAGS=$ac_save_cxxflags + LIBS=$ac_save_libs + ])dnl + + if test "$ac_cv_have_gl" = "no"; then + AC_MSG_RESULT(no) + GL_LDFLAGS="" + GLINC="" + $2 + else + AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) + if test "$GL_LDFLAGS" = ""; then + GLLIB='-lGLU -lGL $(LIB_X11)' + else + GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' + fi + if test "$GL_INCLUDE" = ""; then + GLINC="" + else + GLINC="-I$GL_INCLUDE" + fi + AC_MSG_RESULT($ac_cv_have_gl) + $1 + fi + fi + AC_SUBST(GLINC) + AC_SUBST(GLLIB) +]) + + + dnl shadow password and PAM magic - maintained by ossi@kde.org + +AC_DEFUN([KDE_PAM], [ + AC_REQUIRE([KDE_CHECK_LIBDL]) + + want_pam= + AC_ARG_WITH(pam, + AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), + [ if test "x$withval" = "xyes"; then + want_pam=yes + pam_service=kde + elif test "x$withval" = "xno"; then + want_pam=no + else + want_pam=yes + pam_service=$withval + fi + ], [ pam_service=kde ]) + + use_pam= + PAMLIBS= + if test "x$want_pam" != xno; then + AC_CHECK_LIB(pam, pam_start, [ + AC_CHECK_HEADER(security/pam_appl.h, + [ pam_header=security/pam_appl.h ], + [ AC_CHECK_HEADER(pam/pam_appl.h, + [ pam_header=pam/pam_appl.h ], + [ + AC_MSG_WARN([PAM detected, but no headers found! +Make sure you have the necessary development packages installed.]) + ] + ) + ] + ) + ], , $LIBDL) + if test -z "$pam_header"; then + if test "x$want_pam" = xyes; then + AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) + fi + else + AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) + PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" + use_pam=yes + + dnl darwin claims to be something special + if test "$pam_header" = "pam/pam_appl.h"; then + AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) + fi + + dnl test whether struct pam_message is const (Linux) or not (Sun) + AC_MSG_CHECKING(for const pam_message) + AC_EGREP_HEADER([struct pam_message], $pam_header, + [ AC_EGREP_HEADER([const struct pam_message], $pam_header, + [AC_MSG_RESULT([const: Linux-type PAM])], + [AC_MSG_RESULT([nonconst: Sun-type PAM]) + AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] + )], + [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) + fi + fi + + AC_SUBST(PAMLIBS) +]) + +dnl DEF_PAM_SERVICE(arg name, full name, define name) +AC_DEFUN([DEF_PAM_SERVICE], [ + AC_ARG_WITH($1-pam, + AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE=$withval + else + AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. +You may want to enforce it by using --with-pam.]) + fi + ], + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE="$pam_service" + fi + ]) + if test -n "$$3_PAM_SERVICE"; then + AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) + AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) + fi + AC_SUBST($3_PAM_SERVICE) +]) + +AC_DEFUN([KDE_SHADOWPASSWD], [ + AC_REQUIRE([KDE_PAM]) + + AC_CHECK_LIB(shadow, getspent, + [ LIBSHADOW="-lshadow" + ac_use_shadow=yes + ], + [ dnl for UnixWare + AC_CHECK_LIB(gen, getspent, + [ LIBGEN="-lgen" + ac_use_shadow=yes + ], + [ AC_CHECK_FUNC(getspent, + [ ac_use_shadow=yes ], + [ ac_use_shadow=no ]) + ]) + ]) + AC_SUBST(LIBSHADOW) + AC_SUBST(LIBGEN) + + AC_MSG_CHECKING([for shadow passwords]) + + AC_ARG_WITH(shadow, + AC_HELP_STRING([--with-shadow],[If you want shadow password support]), + [ if test "x$withval" != "xno"; then + use_shadow=yes + else + use_shadow=no + fi + ], [ + use_shadow="$ac_use_shadow" + ]) + + if test "x$use_shadow" = xyes; then + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) + else + AC_MSG_RESULT(no) + LIBSHADOW= + LIBGEN= + fi + + dnl finally make the relevant binaries setuid root, if we have shadow passwds. + dnl this still applies, if we could use it indirectly through pam. + if test "x$use_shadow" = xyes || + ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then + case $host in + *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) + SETUIDFLAGS="-m 4755 -o root";; + *) + SETUIDFLAGS="-m 4755";; + esac + fi + AC_SUBST(SETUIDFLAGS) + +]) + +AC_DEFUN([KDE_PASSWDLIBS], [ + AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT + AC_REQUIRE([KDE_PAM]) + AC_REQUIRE([KDE_SHADOWPASSWD]) + + if test "x$use_pam" = "xyes"; then + PASSWDLIBS="$PAMLIBS" + else + PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" + fi + + dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but + dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires + dnl root to read, so kcheckpass needs to be root (even when using pam, since pam + dnl may need to read /etc/master.passwd). + case $host in + *-*-freebsd*) + SETUIDFLAGS="-m 4755 -o root" + ;; + *) + ;; + esac + + AC_SUBST(PASSWDLIBS) +]) + +AC_DEFUN([KDE_CHECK_LIBDL], +[ +AC_CHECK_LIB(dl, dlopen, [ +LIBDL="-ldl" +ac_cv_have_dlfcn=yes +]) + +AC_CHECK_LIB(dld, shl_unload, [ +LIBDL="-ldld" +ac_cv_have_shload=yes +]) + +AC_SUBST(LIBDL) +]) + +AC_DEFUN([KDE_CHECK_DLOPEN], +[ +KDE_CHECK_LIBDL +AC_CHECK_HEADERS(dlfcn.h dl.h) +if test "$ac_cv_header_dlfcn_h" = "no"; then + ac_cv_have_dlfcn=no +fi + +if test "$ac_cv_header_dl_h" = "no"; then + ac_cv_have_shload=no +fi + +dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE +dnl (MM) +AC_ARG_ENABLE(dlopen, +AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), +enable_dlopen=$enableval, +enable_dlopen=yes) + +# override the user's opinion, if we know it better ;) +if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then + enable_dlopen=no +fi + +if test "$ac_cv_have_dlfcn" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) +fi + +if test "$ac_cv_have_shload" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) +fi + +if test "$enable_dlopen" = no ; then + test -n "$1" && eval $1 +else + test -n "$2" && eval $2 +fi + +]) + +AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], +[ +KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) +KDE_PROG_LIBTOOL +AC_MSG_CHECKING([dynamic loading]) +eval "`egrep '^build_libtool_libs=' libtool`" +if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then + dynamic_loading=yes + AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) +else + dynamic_loading=no +fi +AC_MSG_RESULT($dynamic_loading) +if test "$dynamic_loading" = "yes"; then + $1 +else + $2 +fi +]) + +AC_DEFUN([KDE_ADD_INCLUDES], +[ +if test -z "$1"; then + test_include="Pix.h" +else + test_include="$1" +fi + +AC_MSG_CHECKING([for libg++ ($test_include)]) + +AC_CACHE_VAL(kde_cv_libgpp_includes, +[ +kde_cv_libgpp_includes=no + + for ac_dir in \ + \ + /usr/include/g++ \ + /usr/include \ + /usr/unsupported/include \ + /opt/include \ + $extra_include \ + ; \ + do + if test -r "$ac_dir/$test_include"; then + kde_cv_libgpp_includes=$ac_dir + break + fi + done +]) + +AC_MSG_RESULT($kde_cv_libgpp_includes) +if test "$kde_cv_libgpp_includes" != "no"; then + all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" +fi +]) +]) + +AC_DEFUN([KDE_CHECK_LIBPTHREAD], +[ + dnl This code is here specifically to handle the + dnl various flavors of threading library on FreeBSD + dnl 4-, 5-, and 6-, and the (weird) rules around it. + dnl There may be an environment PTHREAD_LIBS that + dnl specifies what to use; otherwise, search for it. + dnl -pthread is special cased and unsets LIBPTHREAD + dnl below if found. + LIBPTHREAD="" + + if test -n "$PTHREAD_LIBS"; then + if test "x$PTHREAD_LIBS" = "x-pthread" ; then + LIBPTHREAD="PTHREAD" + else + PTHREAD_LIBS_save="$PTHREAD_LIBS" + PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` + AC_MSG_CHECKING([for pthread_create in $PTHREAD_LIBS]) + KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [ + LIBPTHREAD="$PTHREAD_LIBS_save"]) + PTHREAD_LIBS="$PTHREAD_LIBS_save" + fi + fi + + dnl Is this test really needed, in the face of the Tru64 test below? + if test -z "$LIBPTHREAD"; then + AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"]) + fi + + dnl This is a special Tru64 check, see BR 76171 issue #18. + if test -z "$LIBPTHREAD" ; then + AC_MSG_CHECKING([for pthread_create in -lpthread]) + kde_safe_libs=$LIBS + LIBS="$LIBS -lpthread" + AC_TRY_LINK([#include <pthread.h>],[(void)pthread_create(0,0,0,0);],[ + AC_MSG_RESULT(yes) + LIBPTHREAD="-lpthread"],[ + AC_MSG_RESULT(no)]) + LIBS=$kde_safe_libs + fi + + dnl Un-special-case for FreeBSD. + if test "x$LIBPTHREAD" = "xPTHREAD" ; then + LIBPTHREAD="" + fi + + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], +[ + USE_THREADS="" + if test -z "$LIBPTHREAD"; then + KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) + fi + + AH_VERBATIM(__svr_define, [ +#if defined(__SVR4) && !defined(__svr4__) +#define __svr4__ 1 +#endif +]) + case $host_os in + solaris*) + KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) + CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" + ;; + freebsd*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" + ;; + aix*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" + LIBPTHREAD="$LIBPTHREAD -lc_r" + ;; + linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" + if test "$CXX" = "KCC"; then + CXXFLAGS="$CXXFLAGS --thread_safe" + NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" + fi + ;; + *) + ;; + esac + AC_SUBST(USE_THREADS) + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_THREADING], +[ + AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) + AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) + dnl default is yes if libpthread is found and no if no libpthread is available + if test -z "$LIBPTHREAD"; then + if test -z "$USE_THREADS"; then + kde_check_threading_default=no + else + kde_check_threading_default=yes + fi + else + kde_check_threading_default=yes + fi + AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), + kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) + if test "x$kde_use_threading" = "xyes"; then + AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) + fi +]) + +AC_DEFUN([KDE_TRY_LINK_PYTHON], +[ +if test "$kde_python_link_found" = no; then + +if test "$1" = normal; then + AC_MSG_CHECKING(if a Python application links) +else + AC_MSG_CHECKING(if Python depends on $2) +fi + +AC_CACHE_VAL(kde_cv_try_link_python_$1, +[ +kde_save_cflags="$CFLAGS" +CFLAGS="$CFLAGS $PYTHONINC" +kde_save_libs="$LIBS" +LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" +kde_save_ldflags="$LDFLAGS" +LDFLAGS="$LDFLAGS $PYTHONLIB" + +AC_TRY_LINK( +[ +#include <Python.h> +],[ + PySys_SetArgv(1, 0); +], + [kde_cv_try_link_python_$1=yes], + [kde_cv_try_link_python_$1=no] +) +CFLAGS="$kde_save_cflags" +LIBS="$kde_save_libs" +LDFLAGS="$kde_save_ldflags" +]) + +if test "$kde_cv_try_link_python_$1" = "yes"; then + AC_MSG_RESULT(yes) + kde_python_link_found=yes + if test ! "$1" = normal; then + LIBPYTHON="$LIBPYTHON $2" + fi + $3 +else + AC_MSG_RESULT(no) + $4 +fi + +fi + +]) + +AC_DEFUN([KDE_CHECK_PYTHON_DIR], +[ +AC_MSG_CHECKING([for Python directory]) + +AC_CACHE_VAL(kde_cv_pythondir, +[ + if test -z "$PYTHONDIR"; then + kde_cv_pythondir=/usr/local + else + kde_cv_pythondir="$PYTHONDIR" + fi +]) + +AC_ARG_WITH(pythondir, +AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), +[ + ac_python_dir=$withval +], ac_python_dir=$kde_cv_pythondir +) + +AC_MSG_RESULT($ac_python_dir) +]) + +AC_DEFUN([KDE_CHECK_PYTHON_INTERN], +[ +AC_REQUIRE([KDE_CHECK_LIBDL]) +AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) +AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) + +if test -z "$1"; then + version="1.5" +else + version="$1" +fi + +AC_MSG_CHECKING([for Python$version]) + +python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" +AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) +if test ! -r $python_incdir/Python.h; then + AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) + python_incdir=$python_incdir/python$version + if test ! -r $python_incdir/Python.h; then + python_incdir=no + fi +fi + +PYTHONINC=-I$python_incdir + +python_libdirs="$ac_python_dir/lib$kdelibsuff /usr/lib$kdelibsuff /usr/local /usr/lib$kdelibsuff $kde_extra_libs" +AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) +if test ! -r $python_libdir/libpython$version.so; then + AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) + if test ! -r $python_libdir/libpython$version.a; then + AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) + python_libdir=$python_libdir/python$version/config + if test ! -r $python_libdir/libpython$version.a; then + python_libdir=no + fi + fi +fi + +PYTHONLIB=-L$python_libdir +kde_orig_LIBPYTHON=$LIBPYTHON +if test -z "$LIBPYTHON"; then + LIBPYTHON=-lpython$version +fi + +AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) +python_moddir=$python_moddir/python$version +if test ! -r $python_moddir/copy.py; then + python_moddir=no +fi + +PYTHONMODDIR=$python_moddir + +AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) + +if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then + LIBPYTHON=$kde_orig_LIBPYTHON + test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" + test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" + $2 +else + dnl Note: this test is very weak + kde_python_link_found=no + KDE_TRY_LINK_PYTHON(normal) + KDE_TRY_LINK_PYTHON(m, -lm) + KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) + KDE_TRY_LINK_PYTHON(tcl, -ltcl) + KDE_TRY_LINK_PYTHON(db2, -ldb2) + KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) + KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], + [AC_MSG_WARN([it seems, Python depends on another library. + Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this + and contact the authors to let them know about this problem]) + ]) + + LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" + AC_SUBST(PYTHONINC) + AC_SUBST(PYTHONLIB) + AC_SUBST(LIBPYTHON) + AC_SUBST(PYTHONMODDIR) + AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_PYTHON], +[ + KDE_CHECK_PYTHON_INTERN("2.5", + [KDE_CHECK_PYTHON_INTERN("2.4", + [KDE_CHECK_PYTHON_INTERN("2.3", + [KDE_CHECK_PYTHON_INTERN("2.2", + [KDE_CHECK_PYTHON_INTERN("2.1", + [KDE_CHECK_PYTHON_INTERN("2.0", + [KDE_CHECK_PYTHON_INTERN($1, $2) ]) + ]) + ]) + ]) + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_STL], +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" + + AC_MSG_CHECKING([if C++ programs can be compiled]) + AC_CACHE_VAL(kde_cv_stl_works, + [ + AC_TRY_COMPILE([ +#include <string> +using namespace std; +],[ + string astring="Hallo Welt."; + astring.erase(0, 6); // now astring is "Welt" + return 0; +], kde_cv_stl_works=yes, + kde_cv_stl_works=no) +]) + + AC_MSG_RESULT($kde_cv_stl_works) + + if test "$kde_cv_stl_works" = "yes"; then + # back compatible + AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) + else + AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. +Check config.log for details - if you're using a Linux distribution you might miss +a package named similar to libstdc++-dev.]) + fi + + CXXFLAGS="$ac_save_CXXFLAGS" + AC_LANG_RESTORE +]) + +AC_DEFUN([AC_FIND_QIMGIO], + [AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for qimgio]) +AC_CACHE_VAL(ac_cv_lib_qimgio, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +ac_save_CXXFLAGS="$CXXFLAGS" +LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +AC_TRY_RUN(dnl +[ +#include <qimageio.h> +#include <qstring.h> +int main() { + QString t = "hallo"; + t.fill('t'); + qInitImageIO(); +} +], + ac_cv_lib_qimgio=yes, + ac_cv_lib_qimgio=no, + ac_cv_lib_qimgio=no) +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then + LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) + AC_SUBST(LIBQIMGIO) +else + AC_MSG_RESULT(not found) +fi +]) + +AC_DEFUN([AM_DISABLE_LIBRARIES], +[ + AC_PROVIDE([AM_ENABLE_STATIC]) + AC_PROVIDE([AM_ENABLE_SHARED]) + enable_static=no + enable_shared=yes +]) + + +AC_DEFUN([AC_CHECK_UTMP_FILE], +[ + AC_MSG_CHECKING([for utmp file]) + + AC_CACHE_VAL(kde_cv_utmp_file, + [ + kde_cv_utmp_file=no + + for ac_file in \ + \ + /var/run/utmp \ + /var/adm/utmp \ + /etc/utmp \ + ; \ + do + if test -r "$ac_file"; then + kde_cv_utmp_file=$ac_file + break + fi + done + ]) + + if test "$kde_cv_utmp_file" != "no"; then + AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) + $1 + AC_MSG_RESULT($kde_cv_utmp_file) + else + $2 + AC_MSG_RESULT([non found]) + fi +]) + + +AC_DEFUN([KDE_CREATE_SUBDIRSLIST], +[ + +DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" +TOPSUBDIRS="" + +if test ! -s $srcdir/subdirs; then + dnl Note: Makefile.common creates subdirs, so this is just a fallback + files=`cd $srcdir && ls -1` + dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` + for i in $dirs; do + echo $i >> $srcdir/subdirs + done +fi + +ac_topsubdirs= +if test -s $srcdir/inst-apps; then + ac_topsubdirs="`cat $srcdir/inst-apps`" +elif test -s $srcdir/subdirs; then + ac_topsubdirs="`cat $srcdir/subdirs`" +fi + +for i in $ac_topsubdirs; do + AC_MSG_CHECKING([if $i should be compiled]) + if test -d $srcdir/$i; then + install_it="yes" + for j in $DO_NOT_COMPILE; do + if test $i = $j; then + install_it="no" + fi + done + else + install_it="no" + fi + AC_MSG_RESULT($install_it) + vari=`echo $i | sed -e 's,[[-+.@]],_,g'` + if test $install_it = "yes"; then + TOPSUBDIRS="$TOPSUBDIRS $i" + eval "$vari""_SUBDIR_included=yes" + else + eval "$vari""_SUBDIR_included=no" + fi +done + +AC_SUBST(TOPSUBDIRS) +]) + +AC_DEFUN([KDE_CHECK_NAMESPACES], +[ +AC_MSG_CHECKING(whether C++ compiler supports namespaces) +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +AC_TRY_COMPILE([ +], +[ +namespace Foo { + extern int i; + namespace Bar { + extern int i; + } +} + +int Foo::i = 0; +int Foo::Bar::i = 1; +],[ + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_NAMESPACES) +], [ +AC_MSG_RESULT(no) +]) +AC_LANG_RESTORE +]) + +dnl ------------------------------------------------------------------------ +dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_S_ISSOCK], +[ +AC_MSG_CHECKING(for S_ISSOCK) +AC_CACHE_VAL(ac_cv_have_s_issock, +[ +AC_TRY_LINK( +[ +#include <sys/stat.h> +], +[ +struct stat buff; +int b = S_ISSOCK( buff.st_mode ); +], +ac_cv_have_s_issock=yes, +ac_cv_have_s_issock=no) +]) +AC_MSG_RESULT($ac_cv_have_s_issock) +if test "$ac_cv_have_s_issock" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) +fi + +AH_VERBATIM(_ISSOCK, +[ +#ifndef HAVE_S_ISSOCK +#define HAVE_S_ISSOCK +#define S_ISSOCK(mode) (1==0) +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], +[ +AC_MSG_CHECKING(for MAXPATHLEN) +AC_CACHE_VAL(ac_cv_maxpathlen, +[ +cat > conftest.$ac_ext <<EOF +#ifdef STDC_HEADERS +# include <stdlib.h> +#endif +#include <stdio.h> +#include <sys/param.h> +#ifndef MAXPATHLEN +#define MAXPATHLEN 1024 +#endif + +KDE_HELLO MAXPATHLEN + +EOF + +ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" + +if AC_TRY_EVAL(ac_try) && test -s conftest.out; then + ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` +else + ac_cv_maxpathlen=1024 +fi + +rm conftest.* + +]) +AC_MSG_RESULT($ac_cv_maxpathlen) +AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) +]) + +AC_DEFUN([KDE_CHECK_HEADER], +[ + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_CHECK_HEADER([$1], [$2], [$3], [$4]) + AC_LANG_RESTORE + CPPFLAGS=$kde_safe_cppflags +]) + +AC_DEFUN([KDE_CHECK_HEADERS], +[ + AH_CHECK_HEADERS([$1]) + AC_LANG_SAVE + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_CPLUSPLUS + AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) + CPPFLAGS=$kde_safe_cppflags + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_FAST_CONFIGURE], +[ + dnl makes configure fast (needs perl) + AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), + with_fast_perl=$enableval, with_fast_perl=yes) +]) + +AC_DEFUN([KDE_CONF_FILES], +[ + val= + if test -f $srcdir/configure.files ; then + val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` + fi + CONF_FILES= + if test -n "$val" ; then + for i in $val ; do + CONF_FILES="$CONF_FILES $i" + done + fi + AC_SUBST(CONF_FILES) +])dnl + +dnl This sets the prefix, for arts and kdelibs +dnl Do NOT use in any other module. +dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde +AC_DEFUN([KDE_SET_PREFIX_CORE], +[ + unset CDPATH + dnl make $KDEDIR the default for the installation + AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) + + if test "x$prefix" = "xNONE"; then + prefix=$ac_default_prefix + ac_configure_args="$ac_configure_args --prefix=$prefix" + fi + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + kde_libs_prefix='$(prefix)' + kde_libs_htmldir='$(kde_htmldir)' + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + + +AC_DEFUN([KDE_SET_PREFIX], +[ + unset CDPATH + dnl We can't give real code to that macro, only a value. + dnl It only matters for --help, since we set the prefix in this function anyway. + AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix}) + + KDE_SET_DEFAULT_BINDIRS + if test "x$prefix" = "xNONE"; then + dnl no prefix given: look for kde-config in the PATH and deduce the prefix from it + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + else + dnl prefix given: look for kde-config, preferrably in prefix, otherwise in PATH + kde_save_PATH="$PATH" + PATH="$exec_prefix/bin:$prefix/bin:$PATH" + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + PATH="$kde_save_PATH" + fi + + kde_libs_prefix=`$KDECONFIG --prefix` + if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then + AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. + This means it has been moved since you installed it. + This won't work. Please recompile kdelibs for the new prefix. + ]) + fi + kde_libs_htmldir=`$KDECONFIG --install html --expandvars` + + AC_MSG_CHECKING([where to install]) + if test "x$prefix" = "xNONE"; then + prefix=$kde_libs_prefix + AC_MSG_RESULT([$prefix (as returned by kde-config)]) + else + dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different + given_prefix=$prefix + AC_MSG_RESULT([$prefix (as requested)]) + fi + + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + AC_SUBST(KDECONFIG) + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + +pushdef([AC_PROG_INSTALL], +[ + dnl our own version, testing for a -p flag + popdef([AC_PROG_INSTALL]) + dnl as AC_PROG_INSTALL works as it works we first have + dnl to save if the user didn't specify INSTALL, as the + dnl autoconf one overwrites INSTALL and we have no chance to find + dnl out afterwards + test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL + test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM + test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT + AC_PROG_INSTALL + + if test -z "$kde_save_INSTALL_given" ; then + # OK, user hasn't given any INSTALL, autoconf found one for us + # now we test, if it supports the -p flag + AC_MSG_CHECKING(for -p flag to install) + rm -f confinst.$$.* > /dev/null 2>&1 + echo "Testtest" > confinst.$$.orig + ac_res=no + if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then + if test -f confinst.$$.new ; then + # OK, -p seems to do no harm to install + INSTALL="${INSTALL} -p" + ac_res=yes + fi + fi + rm -f confinst.$$.* + AC_MSG_RESULT($ac_res) + fi + dnl the following tries to resolve some signs and wonders coming up + dnl with different autoconf/automake versions + dnl e.g.: + dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s + dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) + dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s + dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has + dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the + dnl install-@DIR@PROGRAMS targets to explicitly use that flag + dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as + dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 + dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure + dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from + dnl automake (due to broken Makefile.am or whatever) to install programs, + dnl and so does not see the -s flag in automake > 1.4 + dnl to clean up that mess we: + dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG + dnl which cleans KDE's program with automake > 1.4; + dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems + dnl with automake<=1.4 + dnl note that dues to this sometimes two '-s' flags are used (if KDE + dnl properly uses install-@DIR@PROGRAMS, but I don't care + dnl + dnl And to all this comes, that I even can't write in comments variable + dnl names used by automake, because it is so stupid to think I wanted to + dnl _use_ them, therefor I have written A_M_... instead of AM_ + dnl hmm, I wanted to say something ... ahh yes: Arghhh. + + if test -z "$kde_save_INSTALL_PROGRAM_given" ; then + INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' + fi + if test -z "$kde_save_INSTALL_SCRIPT_given" ; then + INSTALL_SCRIPT='${INSTALL}' + fi +])dnl + +AC_DEFUN([KDE_LANG_CPLUSPLUS], +[AC_LANG_CPLUSPLUS +ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' +pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) +]) + +pushdef([AC_LANG_CPLUSPLUS], +[popdef([AC_LANG_CPLUSPLUS]) +KDE_LANG_CPLUSPLUS +]) + +AC_DEFUN([KDE_CHECK_LONG_LONG], +[ +AC_MSG_CHECKING(for long long) +AC_CACHE_VAL(kde_cv_c_long_long, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_LINK([], [ + long long foo = 0; + foo = foo+1; + ], + kde_cv_c_long_long=yes, kde_cv_c_long_long=no) + AC_LANG_RESTORE +]) +AC_MSG_RESULT($kde_cv_c_long_long) +if test "$kde_cv_c_long_long" = yes; then + AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) +fi +]) + +AC_DEFUN([KDE_CHECK_LIB], +[ + kde_save_LDFLAGS="$LDFLAGS" + dnl AC_CHECK_LIB modifies LIBS, so save it here + kde_save_LIBS="$LIBS" + LDFLAGS="$LDFLAGS $all_libraries" + case $host_os in + aix*) LDFLAGS="-brtl $LDFLAGS" + test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" + ;; + esac + AC_CHECK_LIB($1, $2, $3, $4, $5) + LDFLAGS="$kde_save_LDFLAGS" + LIBS="$kde_save_LIBS" +]) + +AC_DEFUN([KDE_JAVA_PREFIX], +[ + dir=`dirname "$1"` + base=`basename "$1"` + list=`ls -1 $dir 2> /dev/null` + for entry in $list; do + if test -d $dir/$entry/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/bin" + ;; + esac + elif test -d $dir/$entry/jre/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/jre/bin" + ;; + esac + fi + done +]) + +dnl KDE_CHEC_JAVA_DIR(onlyjre) +AC_DEFUN([KDE_CHECK_JAVA_DIR], +[ + +AC_ARG_WITH(java, +AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), +[ ac_java_dir=$withval +], ac_java_dir="" +) + +AC_MSG_CHECKING([for Java]) + +dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH +if test "x$ac_java_dir" = "xno"; then + kde_java_bindir=no + kde_java_includedir=no + kde_java_libjvmdir=no + kde_java_libgcjdir=no + kde_java_libhpidir=no +else + if test "x$ac_java_dir" = "x"; then + + + dnl No option set -> collect list of candidate paths + if test -n "$JAVA_HOME"; then + KDE_JAVA_PREFIX($JAVA_HOME) + fi + KDE_JAVA_PREFIX(/usr/j2se) + KDE_JAVA_PREFIX(/usr/lib/j2se) + KDE_JAVA_PREFIX(/usr/j*dk*) + KDE_JAVA_PREFIX(/usr/lib/j*dk*) + KDE_JAVA_PREFIX(/opt/j*sdk*) + KDE_JAVA_PREFIX(/usr/lib/java*) + KDE_JAVA_PREFIX(/usr/java*) + KDE_JAVA_PREFIX(/usr/java/j*dk*) + KDE_JAVA_PREFIX(/usr/java/j*re*) + KDE_JAVA_PREFIX(/usr/lib/SunJava2*) + KDE_JAVA_PREFIX(/usr/lib/SunJava*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava*) + KDE_JAVA_PREFIX(/opt/java*) + + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + for dir in $PATH; do + if test -d "$dir"; then + javadirs="$javadirs $dir" + fi + done + IFS=$kde_save_IFS + jredirs= + + dnl Now javadirs contains a list of paths that exist, all ending with bin/ + for dir in $javadirs; do + dnl Check for the java executable + if test -x "$dir/java"; then + sane_path=$(cd $dir; /bin/pwd) + dnl And also check for a libjvm.so somewhere under there + dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. + if test "$sane_path" != "/usr/bin"; then + libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + if test ! -f $libjvmdir/libjvm.so; then continue; fi + jredirs="$jredirs $dir" + fi + fi + done + + dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found + JAVAC= + JAVA= + kde_java_bindir=no + for dir in $jredirs; do + JAVA="$dir/java" + kde_java_bindir=$dir + if test -x "$dir/javac"; then + JAVAC="$dir/javac" + break + fi + done + + if test -n "$JAVAC"; then + dnl this substitution might not work - well, we test for jni.h below + kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` + else + kde_java_includedir=no + fi + else + dnl config option set + kde_java_bindir=$ac_java_dir/bin + if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then + kde_java_includedir=no + else + kde_java_includedir=$ac_java_dir/include + fi + fi +fi + +dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" +if test "x$kde_java_bindir" != "xno"; then + + dnl Look for libjvm.so + kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + dnl Look for libgcj.so + kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` + dnl Look for libhpi.so and avoid green threads + kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` + + dnl Now check everything's fine under there + dnl the include dir is our flag for having the JDK + if test -d "$kde_java_includedir"; then + if test ! -x "$kde_java_bindir/javac"; then + AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) + fi + if test ! -x "$kde_java_bindir/javah"; then + AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -x "$kde_java_bindir/jar"; then + AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -r "$kde_java_includedir/jni.h"; then + AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) + fi + + jni_includes="-I$kde_java_includedir" + dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. + dnl and under linux here.. + + dnl not needed for gcj + + if test "x$kde_java_libgcjdir" = "x"; then + test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" + test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" + test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" + fi + + else + JAVAC= + jni_includes= + fi + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libjvmdir/libjvm.so"; then + AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) + fi + else + if test ! -r "$kde_java_libgcjdir/libgcj.so"; then + AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) + fi + fi + + if test ! -x "$kde_java_bindir/java"; then + AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + + dnl not needed for gcj compile + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libhpidir/libhpi.so"; then + AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) + fi + fi + + if test -n "$jni_includes"; then + dnl Check for JNI version + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_cxxflags_safe="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" + + AC_TRY_COMPILE([ + #include <jni.h> + ], + [ + #ifndef JNI_VERSION_1_2 + Syntax Error + #endif + ],[ kde_jni_works=yes ], + [ kde_jni_works=no ]) + + if test $kde_jni_works = no; then + AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. + You need to have Java Development Kit (JDK) version 1.2. + + Use --with-java to specify another location. + Use --without-java to configure without java support. + Or download a newer JDK and try again. + See e.g. http://java.sun.com/products/jdk/1.2 ]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + AC_LANG_RESTORE + + dnl All tests ok, inform and subst the variables + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + if test "x$kde_java_libgcjdir" = "x"; then + JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" + else + JVMLIBS="-L$kde_java_libgcjdir -lgcj" + fi + AC_MSG_RESULT([java JDK in $kde_java_bindir]) + + else + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([java JRE in $kde_java_bindir]) + fi +elif test -d "/Library/Java/Home"; then + kde_java_bindir="/Library/Java/Home/bin" + jni_includes="-I/Library/Java/Home/include" + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + JVMLIBS="-Wl,-framework,JavaVM" + + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([Apple Java Framework]) +else + AC_MSG_RESULT([none found]) +fi + +AC_SUBST(JAVAC) +AC_SUBST(JAVAH) +AC_SUBST(JAR) +AC_SUBST(JVMLIBS) +AC_SUBST(jni_includes) + +# for backward compat +kde_cv_java_includedir=$kde_java_includedir +kde_cv_java_bindir=$kde_java_bindir +]) + +dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. +dnl When the argument list becomes big, as in KDE for AC_OUTPUT in +dnl big packages, m4_foreach is dog-slow. So use our own version of +dnl it. (matz@kde.org) +m4_define([mm_foreach], +[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) +m4_define([mm_car], [[$1]]) +m4_define([mm_car2], [[$@]]) +m4_define([_mm_foreach], +[m4_if(m4_quote($2), [], [], + [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], + mm_car2(m4_shift($2)), + [$3])])]) +m4_define([AC_FOREACH], +[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) + +AC_DEFUN([KDE_NEED_FLEX], +[ +kde_libs_safe=$LIBS +LIBS="$LIBS $USER_LDFLAGS" +AM_PROG_LEX +LIBS=$kde_libs_safe +if test -z "$LEXLIB"; then + AC_MSG_ERROR([You need to have flex installed.]) +fi +AC_SUBST(LEXLIB) +]) + +AC_DEFUN([AC_PATH_QTOPIA], +[ + dnl TODO: use AC_CACHE_VAL + + if test -z "$1"; then + qtopia_minver_maj=1 + qtopia_minver_min=5 + qtopia_minver_pat=0 + else + qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` + qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` + qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` + fi + + qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" + qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" + + AC_REQUIRE([AC_PATH_QT]) + + AC_MSG_CHECKING([for Qtopia]) + + LIB_QTOPIA="-lqpe" + AC_SUBST(LIB_QTOPIA) + + kde_qtopia_dirs="$QPEDIR /opt/Qtopia" + + ac_qtopia_incdir=NO + + AC_ARG_WITH(qtopia-dir, + AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), + [ ac_qtopia_incdir="$withval"/include] ) + + qtopia_incdirs="" + for dir in $kde_qtopia_dirs; do + qtopia_incdirs="$qtopia_incdirs $dir/include" + done + + if test ! "$ac_qtopia_incdir" = "NO"; then + qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" + fi + + qtopia_incdir="" + AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) + ac_qtopia_incdir="$qtopia_incdir" + + if test -z "$qtopia_incdir"; then + AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) + fi + + qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; + qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; + qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; + + qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" + qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" + if test "$qtopia_ver" -lt "$qtopia_minver"; then + AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr +is required.]) + fi + + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + ac_cxxflags_safe="$CXXFLAGS" + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" + LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" + LIBS="$LIBS $LIB_QTOPIA $LIBQT" + + cat > conftest.$ac_ext <<EOF +#include "confdefs.h" +#include <qpe/qpeapplication.h> +#include <qpe/version.h> + +int main( int argc, char **argv ) +{ + QPEApplication app( argc, argv ); + return 0; +} +EOF + + if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* + else + rm -f conftest* + AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at +the end of config.log]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + AC_LANG_RESTORE + + QTOPIA_INCLUDES="-I$qtopia_incdir" + AC_SUBST(QTOPIA_INCLUDES) + + AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) +]) + + +AC_DEFUN([KDE_INIT_DOXYGEN], +[ +AC_MSG_CHECKING([for Qt docs]) +kde_qtdir= +if test "${with_qt_dir+set}" = set; then + kde_qtdir="$with_qt_dir" +fi + +AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) +AC_MSG_RESULT($QTDOCDIR) + +AC_SUBST(QTDOCDIR) + +KDE_FIND_PATH(dot, DOT, [], []) +if test -n "$DOT"; then + KDE_HAVE_DOT="YES" +else + KDE_HAVE_DOT="NO" +fi +AC_SUBST(KDE_HAVE_DOT) +KDE_FIND_PATH(doxygen, DOXYGEN, [], []) +AC_SUBST(DOXYGEN) + +DOXYGEN_PROJECT_NAME="$1" +DOXYGEN_PROJECT_NUMBER="$2" +AC_SUBST(DOXYGEN_PROJECT_NAME) +AC_SUBST(DOXYGEN_PROJECT_NUMBER) + +KDE_HAS_DOXYGEN=no +if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/qsql.html; then + KDE_HAS_DOXYGEN=yes +fi +AC_SUBST(KDE_HAS_DOXYGEN) + +]) + + +AC_DEFUN([AC_FIND_BZIP2], +[ +AC_MSG_CHECKING([for bzDecompress in libbz2]) +AC_CACHE_VAL(ac_cv_lib_bzip2, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#define BZ_NO_STDIO +#include<bzlib.h> +], + [ bz_stream s; (void) bzDecompress(&s); ], + eval "ac_cv_lib_bzip2='-lbz2'", + eval "ac_cv_lib_bzip2=no") +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +AC_MSG_RESULT($ac_cv_lib_bzip2) + +if test ! "$ac_cv_lib_bzip2" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2" + AC_SUBST(LIBBZ2) + +else + + cxx_shared_flag= + ld_shared_flag= + KDE_CHECK_COMPILER_FLAG(shared, [ + ld_shared_flag="-shared" + ]) + KDE_CHECK_COMPILER_FLAG(fPIC, [ + cxx_shared_flag="-fPIC" + ]) + + AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) + AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_LIBS="$LIBS" + LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" + kde_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" + + AC_TRY_LINK(dnl + [ + #define BZ_NO_STDIO + #include<bzlib.h> + ], + [ bz_stream s; (void) BZ2_bzDecompress(&s); ], + eval "ac_cv_lib_bzip2_prefix='-lbz2'", + eval "ac_cv_lib_bzip2_prefix=no") + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + + AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) + + if test ! "$ac_cv_lib_bzip2_prefix" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2_prefix" + AC_SUBST(LIBBZ2) + + AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) + dnl else, we just ignore this + fi + +fi +AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the SSL headers and libraries. +dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) +dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([KDE_CHECK_SSL], +[ +LIBSSL="-lssl -lcrypto" +AC_REQUIRE([KDE_CHECK_LIB64]) + +ac_ssl_includes=NO ac_ssl_libraries=NO +ssl_libraries="" +ssl_includes="" +AC_ARG_WITH(ssl-dir, + AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), + [ ac_ssl_includes="$withval"/include + ac_ssl_libraries="$withval"/lib$kdelibsuff + ]) + +want_ssl=yes +AC_ARG_WITH(ssl, + AC_HELP_STRING([--without-ssl],[disable SSL checks]), + [want_ssl=$withval]) + +if test $want_ssl = yes; then + +AC_MSG_CHECKING(for OpenSSL) + +AC_CACHE_VAL(ac_cv_have_ssl, +[#try to guess OpenSSL locations + + ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" + ssl_incdirs="$ac_ssl_includes $ssl_incdirs" + AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) + ac_ssl_includes="$ssl_incdir" + + ssl_libdirs="/usr/lib$kdelibsuff /usr/local/lib$kdelibsuff /usr/ssl/lib$kdelibsuff /usr/local/ssl/lib$kdelibsuff $libdir $prefix/lib$kdelibsuff $exec_prefix/lib$kdelibsuff $kde_extra_libs" + if test ! "$ac_ssl_libraries" = "NO"; then + ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" + fi + + test=NONE + ssl_libdir=NONE + for dir in $ssl_libdirs; do + try="ls -1 $dir/libssl*" + if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done + + ac_ssl_libraries="$ssl_libdir" + + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" + LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" + + AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, + ac_ssl_rsaref="yes" + , + ac_ssl_rsaref="no" + ) + + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then + have_ssl=no + else + have_ssl=yes; + fi + + ]) + + eval "$ac_cv_have_ssl" + + AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) + + AC_MSG_CHECKING([whether OpenSSL uses rsaref]) + AC_MSG_RESULT($ac_ssl_rsaref) + + AC_MSG_CHECKING([for easter eggs]) + AC_MSG_RESULT([none found]) + +else + have_ssl=no +fi + +if test "$have_ssl" = yes; then + AC_MSG_CHECKING(for OpenSSL version) + dnl Check for SSL version + AC_CACHE_VAL(ac_cv_ssl_version, + [ + + cat >conftest.$ac_ext <<EOF +#include <openssl/opensslv.h> +#include <stdio.h> + int main() { + +#ifndef OPENSSL_VERSION_NUMBER + printf("ssl_version=\\"error\\"\n"); +#else + if (OPENSSL_VERSION_NUMBER < 0x00906000) + printf("ssl_version=\\"old\\"\n"); + else + printf("ssl_version=\\"ok\\"\n"); +#endif + return (0); + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + if test "$ac_ssl_includes" != "/usr/include"; then + CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" + fi + + if AC_TRY_EVAL(ac_link); then + + if eval `./conftest 2>&5`; then + if test $ssl_version = error; then + AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) + else + if test $ssl_version = old; then + AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) + have_ssl=no + fi + fi + ac_cv_ssl_version="ssl_version=$ssl_version" + else + AC_MSG_ERROR([Your system couldn't run a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure <faure@kde.org>, attaching your config.log]) + fi + + else + AC_MSG_ERROR([Your system couldn't link a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure <faure@kde.org>, attaching your config.log]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + ]) + + eval "$ac_cv_ssl_version" + AC_MSG_RESULT($ssl_version) +fi + +if test "$have_ssl" != yes; then + LIBSSL=""; +else + AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) + ac_cv_have_ssl="have_ssl=yes \ + ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" + + + ssl_libraries="$ac_ssl_libraries" + ssl_includes="$ac_ssl_includes" + + if test "$ac_ssl_rsaref" = yes; then + LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" + fi + + if test $ssl_version = "old"; then + AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) + fi +fi + +SSL_INCLUDES= + +if test "$ssl_includes" = "/usr/include"; then + if test -f /usr/kerberos/include/krb5.h; then + SSL_INCLUDES="-I/usr/kerberos/include" + fi +elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then + SSL_INCLUDES="-I$ssl_includes" +fi + +if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then + SSL_LDFLAGS="" +else + SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" +fi + +AC_SUBST(SSL_INCLUDES) +AC_SUBST(SSL_LDFLAGS) +AC_SUBST(LIBSSL) +]) + +AC_DEFUN([KDE_CHECK_STRLCPY], +[ + AC_REQUIRE([AC_CHECK_STRLCAT]) + AC_REQUIRE([AC_CHECK_STRLCPY]) + AC_CHECK_SIZEOF(size_t) + AC_CHECK_SIZEOF(unsigned long) + + AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) + AC_TRY_COMPILE(,[ + #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG + choke me + #endif + ],AC_MSG_RESULT([yes]),[ + AC_MSG_RESULT(no) + AC_MSG_ERROR([ + Apparently on your system our assumption sizeof size_t == sizeof unsigned long + does not apply. Please mail kde-devel@kde.org with a description of your system! + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_BINUTILS], +[ + AC_MSG_CHECKING([if ld supports unversioned version maps]) + + kde_save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + echo "{ local: extern \"C++\" { foo }; };" > conftest.map + AC_TRY_LINK([int foo;], +[ +#ifdef __INTEL_COMPILER +icc apparently does not support libtools version-info and version-script +at the same time. Dunno where the bug is, but until somebody figured out, +better disable the optional version scripts. +#endif + + foo = 42; +], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) + LDFLAGS="$kde_save_LDFLAGS" + rm -f conftest.map + AM_CONDITIONAL(include_VERSION_SCRIPT, + [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) + + AC_MSG_RESULT($kde_supports_versionmaps) +]) + +AC_DEFUN([AM_PROG_OBJC],[ +AC_CHECK_PROGS(OBJC, gcc, gcc) +test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) +if test "x${OBJCFLAGS-unset}" = xunset; then + OBJCFLAGS="-g -O2" +fi +AC_SUBST(OBJCFLAGS) +_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) +]) + +AC_DEFUN([KDE_CHECK_PERL], +[ + KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ + AC_MSG_ERROR([No Perl found in your $PATH. +We need perl to generate some code.]) + ]) + AC_SUBST(PERL) +]) + +AC_DEFUN([KDE_CHECK_LARGEFILE], +[ +AC_SYS_LARGEFILE +if test "$ac_cv_sys_file_offset_bits" != no; then + CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" +fi + +if test "x$ac_cv_sys_large_files" != "xno"; then + CPPFLAGS="$CPPFLAGS -D_LARGE_FILES=1" +fi + +]) + +dnl A small extension to PKG_CHECK_MODULES (defined in pkg.m4.in) +dnl which allows to search for libs that get installed into the KDE prefix. +dnl +dnl Syntax: KDE_PKG_CHECK_MODULES(KSTUFF, libkexif >= 0.2 glib = 1.3.4, action-if, action-not) +dnl defines KSTUFF_LIBS, KSTUFF_CFLAGS, see pkg-config man page +dnl also defines KSTUFF_PKG_ERRORS on error +AC_DEFUN([KDE_PKG_CHECK_MODULES], [ + + PKG_CONFIG_PATH="$prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" + if test "$prefix" != "$kde_libs_prefix"; then + PKG_CONFIG_PATH="$kde_libs_prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" + fi + export PKG_CONFIG_PATH + PKG_CHECK_MODULES([$1],[$2],[$3],[$4]) +]) + + +dnl Check for PIE support in the compiler and linker +AC_DEFUN([KDE_CHECK_PIE_SUPPORT], +[ + AC_CACHE_CHECK([for PIE support], kde_cv_val_pie_support, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIE" + LDFLAGS="$LDFLAGS -pie" + + AC_TRY_LINK([int foo;], [], [kde_cv_val_pie_support=yes], [kde_cv_val_pie_support=no]) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ]) + + AC_MSG_CHECKING(if enabling -pie/fPIE support) + + AC_ARG_ENABLE(pie, + AC_HELP_STRING([--enable-pie],[platform supports PIE linking [default=detect]]), + [kde_has_pie_support=$enableval], + [kde_has_pie_support=detect]) + + if test "$kde_has_pie_support" = "detect"; then + kde_has_pie_support=$kde_cv_val_pie_support + fi + + AC_MSG_RESULT([$kde_has_pie_support]) + + KDE_USE_FPIE="" + KDE_USE_PIE="" + + AC_SUBST([KDE_USE_FPIE]) + AC_SUBST([KDE_USE_PIE]) + + if test "$kde_has_pie_support" = "yes"; then + KDE_USE_FPIE="-fPIE" + KDE_USE_PIE="-pie" + fi +]) +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +## Copyright 1996, 1997, 1998, 1999, 2000, 2001 +## Free Software Foundation, Inc. +## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, but +## WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +## General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +## +## As a special exception to the GNU General Public License, if you +## distribute this file as part of a program that contains a +## configuration script generated by Autoconf, you may include it under +## the same distribution terms that you use for the rest of that program. + +# serial 47 AC_PROG_LIBTOOL + + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' +AC_SUBST(LIBTOOL)dnl + +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + + +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +AC_REQUIRE([AC_PROG_NM])dnl + +AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl +dnl + +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR + +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac + +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) + +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP + + +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER + + +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX + + +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +[$]* +EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + LINUX_64_MODE="32" + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + LINUX_64_MODE="64" + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; + ]) +esac + +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + $2=yes + fi + fi + $rm conftest* +]) + +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + testring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ + = "XX$testring") >/dev/null 2>&1 && + new_result=`expr "X$testring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + testring=$testring$testring + done + testring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<EOF +[#line __oline__ "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include <dlfcn.h> +#endif + +#include <stdio.h> + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + # According to Tom Tromey, Ian Lance Taylor reported there are C compilers + # that will create temporary files in the current directory regardless of + # the output directory. Thus, making CWD read-only will cause this test + # to fail, enabling locking or at least warning the user not to do parallel + # builds. + chmod -w . + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . + $rm conftest* out/* + rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib<name>.so + # instead of lib<name>.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + libsuff= + if test "x$LINUX_64_MODE" = x64; then + # Some platforms are per default 64-bit, so there's no /lib64 + if test -d /lib64 -a ! -h /lib64; then + libsuff=64 + fi + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" + sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && test "X$CXX" != "Xno"; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG + else + tagname="" + fi + ;; + + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG + + +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN + + +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 dll's +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL + + +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED + + +# AC_DISABLE_SHARED +# ----------------- +#- set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED + + +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC + + +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC + + +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL + + +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL + + +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE + + +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX + + +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC + + +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in + *GNU* | *'with BFD'*) + test "$with_gnu_ld" != no && break + ;; + *) + test "$with_gnu_ld" != yes && break + ;; + esac + fi + done + IFS="$lt_save_ifs" +else + lt_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$lt_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_PROG_LD_GNU +])# AC_PROG_LD + + +# AC_PROG_LD_GNU +# -------------- +AC_DEFUN([AC_PROG_LD_GNU], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +case `$LD -v 2>&1 </dev/null` in +*GNU* | *'with BFD'*) + lt_cv_prog_gnu_ld=yes + ;; +*) + lt_cv_prog_gnu_ld=no + ;; +esac]) +with_gnu_ld=$lt_cv_prog_gnu_ld +])# AC_PROG_LD_GNU + + +# AC_PROG_LD_RELOAD_FLAG +# ---------------------- +# find reload flag for linker +# -- PORTME Some linkers may need a different reload flag. +AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], +[AC_CACHE_CHECK([for $LD option to reload object files], + lt_cv_ld_reload_flag, + [lt_cv_ld_reload_flag='-r']) +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +])# AC_PROG_LD_RELOAD_FLAG + + +# AC_DEPLIBS_CHECK_METHOD +# ----------------------- +# how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], +[AC_CACHE_CHECK([how to recognise dependent libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + lt_cv_deplibs_check_method=pass_all + ;; + +mingw* | pw32*) + # win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='win32_libid' + ;; + +darwin* | rhapsody*) + # this will be overwritten by pass_all, but leave it in just in case + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[[012]]) + lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | kfreebsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case "$host_cpu" in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + irix5* | nonstopux*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + case $host_cpu in + alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) + lt_cv_deplibs_check_method=pass_all ;; + # the debian people say, arm and glibc 2.3.1 works for them with pass_all + arm* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac + fi + done + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM + + +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM + + +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided and an installed libltdl is not found, it is +# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +# quotes!). If your package is not flat and you're not using automake, +# define top_builddir and top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE + + +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX + + +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + + +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 + + +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ + + +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_RC +# -------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC + + +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + +_LT_AC_SYS_COMPILER + +# +# Check for any special shared library compilation flags. +# +_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' + ;; + esac +fi +if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then + AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) + _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +# Report which librarie types wil actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + darwin* | rhapsody*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG + + +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cc + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + AC_PROG_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # KDE requires run time linking. Make it the default. + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='-qmkshrobj ${wl}-G' + else + shared_flag='-qmkshrobj' + fi + fi + fi + + # Let the compiler handle the export list. + _LT_AC_TAGVAR(always_export_symbols, $1)=no + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case "$host_cpu" in + ia64*|hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc) + # Intel C++ + with_gnu_ld=yes + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + cxx) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sco*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG + +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext <<EOF +int a; +void foo (void) { a = 0; } +EOF +],[$1],[CXX],[cat > conftest.$ac_ext <<EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +EOF +],[$1],[F77],[cat > conftest.$ac_ext <<EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +EOF +],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +EOF +]) +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + # The `*' in the case matches for architectures that use `case' in + # $output_verbose_cmd can trigger glob expansion during the loop + # eval without this substitution. + output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + + for p in `eval $output_verbose_link_cmd`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" \ + || test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then + _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + ;; + + *.$objext|*.$libext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then + _LT_AC_TAGVAR(predep_objects, $1)="$p" + else + _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then + _LT_AC_TAGVAR(postdep_objects, $1)="$p" + else + _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$rm -f confest.$objext + +case " $_LT_AC_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac +])# AC_LIBTOOL_POSTDEP_PREDEP + +# AC_LIBTOOL_LANG_F77_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) +AC_DEFUN([_LT_AC_LANG_F77_CONFIG], +[AC_REQUIRE([AC_PROG_F77]) +AC_LANG_PUSH(Fortran 77) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code=" subroutine t\n return\n end\n" + +# Code to be used in simple link tests +lt_simple_link_test_code=" program t\n end\n" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${F77-"f77"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; +aix4*) + test "$enable_shared" = yes && enable_static=no + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$G77" +_LT_AC_TAGVAR(LD, $1)="$LD" + +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP + + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_F77_CONFIG + + +# AC_LIBTOOL_LANG_GCJ_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) +AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], +[AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${GCJ-"gcj"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_RESTORE +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_GCJ_CONFIG + + +# AC_LIBTOOL_LANG_RC_CONFIG +# -------------------------- +# Ensure that the configuration vars for the Windows resource compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) +AC_DEFUN([_LT_AC_LANG_RC_CONFIG], +[AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${RC-"windres"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_RESTORE +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_RC_CONFIG + + +# AC_LIBTOOL_CONFIG([TAGNAME]) +# ---------------------------- +# If TAGNAME is not passed, then create an initial libtool script +# with a default configuration from the untagged config vars. Otherwise +# add code to config.status for appending the configuration named by +# TAGNAME from the matching tagged config vars. +AC_DEFUN([AC_LIBTOOL_CONFIG], +[# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + _LT_AC_TAGVAR(compiler, $1) \ + _LT_AC_TAGVAR(CC, $1) \ + _LT_AC_TAGVAR(LD, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ + _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ + _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ + _LT_AC_TAGVAR(old_archive_cmds, $1) \ + _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ + _LT_AC_TAGVAR(predep_objects, $1) \ + _LT_AC_TAGVAR(postdep_objects, $1) \ + _LT_AC_TAGVAR(predeps, $1) \ + _LT_AC_TAGVAR(postdeps, $1) \ + _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ + _LT_AC_TAGVAR(archive_cmds, $1) \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ + _LT_AC_TAGVAR(postinstall_cmds, $1) \ + _LT_AC_TAGVAR(postuninstall_cmds, $1) \ + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ + _LT_AC_TAGVAR(allow_undefined_flag, $1) \ + _LT_AC_TAGVAR(no_undefined_flag, $1) \ + _LT_AC_TAGVAR(export_symbols_cmds, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ + _LT_AC_TAGVAR(hardcode_automatic, $1) \ + _LT_AC_TAGVAR(module_cmds, $1) \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) \ + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ + _LT_AC_TAGVAR(exclude_expsyms, $1) \ + _LT_AC_TAGVAR(include_expsyms, $1); do + + case $var in + _LT_AC_TAGVAR(old_archive_cmds, $1) | \ + _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ + _LT_AC_TAGVAR(archive_cmds, $1) | \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(module_cmds, $1) | \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ + _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\[$]0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` + ;; + esac + +ifelse([$1], [], + [cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" + AC_MSG_NOTICE([creating $ofile])], + [cfgfile="$ofile"]) + + cat <<__EOF__ >> "$cfgfile" +ifelse([$1], [], +[#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext='$shrext' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGISTW]]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat <<EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <<EOF >> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac +]) + + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <<EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach <jrb3@best.com> says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <<EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + + # KDE requires run time linking. Make it the default. + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='-qmkshrobj ${wl}-G' + else + shared_flag='-qmkshrobj' + fi + fi + fi + + # Let the compiler handle the export list. + _LT_AC_TAGVAR(always_export_symbols, $1)=no + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + bsdi4*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes ; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include <windows.h> +# #undef WIN32_LEAN_AND_MEAN +# #include <stdio.h> +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include <cygwin/cygwin_dll.h> +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + + +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) +]) + +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) + +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) +]) + +dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not) +dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page +dnl also defines GSTUFF_PKG_ERRORS on error +AC_DEFUN([PKG_CHECK_MODULES], [ + succeeded=no + + if test -z "$PKG_CONFIG"; then + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + fi + + if test "$PKG_CONFIG" = "no" ; then + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + PKG_CONFIG_MIN_VERSION=0.9.0 + if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then + AC_MSG_CHECKING(for $2) + + if $PKG_CONFIG --exists "$2" ; then + AC_MSG_RESULT(yes) + succeeded=yes + + AC_MSG_CHECKING($1_CFLAGS) + $1_CFLAGS=`$PKG_CONFIG --cflags "$2"` + AC_MSG_RESULT($$1_CFLAGS) + + AC_MSG_CHECKING($1_LIBS) + $1_LIBS=`$PKG_CONFIG --libs "$2"` + AC_MSG_RESULT($$1_LIBS) + else + $1_CFLAGS="" + $1_LIBS="" + ## If we have a custom action on failure, don't print errors, but + ## do set a variable so people can do so. + $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + ifelse([$4], ,echo $$1_PKG_ERRORS,) + fi + + AC_SUBST($1_CFLAGS) + AC_SUBST($1_LIBS) + else + echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer." + echo "*** See http://www.freedesktop.org/software/pkgconfig" + fi + fi + + if test $succeeded = yes; then + ifelse([$3], , :, [$3]) + else + ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4]) + fi +]) + + diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..dd92cb3 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,863 @@ +# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.6])]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 7 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH]) +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 3 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.58])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. +# +# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +# created by `make install' are always world readable, even if the +# installer happens to have an overly restrictive umask (e.g. 077). +# This was a mistake. There are at least two reasons why we must not +# use `-m 0755': +# - it causes special bits like SGID to be ignored, +# - it may be too restrictive (some setups expect 775 directories). +# +# Do not use -m 0755 and let people choose whatever they expect by +# setting umask. +# +# We cannot accept any implementation of `mkdir' that recognizes `-p'. +# Some implementations (such as Solaris 8's) are not thread-safe: if a +# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +# concurrently, both version can detect that a/ is missing, but only +# one can create it and the other will error out. Consequently we +# restrict ourselves to GNU make (using the --version option ensures +# this.) +AC_DEFUN([AM_PROG_MKDIR_P], +[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi +AC_SUBST([mkdir_p])]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar <conftest.tar]) + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([acinclude.m4]) diff --git a/admin/Doxyfile.am b/admin/Doxyfile.am new file mode 100644 index 0000000..7ef5b5c --- /dev/null +++ b/admin/Doxyfile.am @@ -0,0 +1,102 @@ +## generate API documentation with doxygen +apidox-am-yes: + @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$DOXDATA" ; then \ + export DOXDATA=$(kde_libs_htmldir)/en/common ; \ + fi ; \ + abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\ + test -d $(top_builddir)/apidocs || \ + ( cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ + --no-modulename --installdir=$(kde_libs_htmldir)/en \ + --no-recurse $(abs_top_srcdir) . ) ; \ + cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ + --recurse --no-modulename --installdir=$(kde_libs_htmldir)/en \ + $$abs_top_srcdir $(subdir) + +apidox-am-toplevel-yes: + @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$ADMIN" ; then \ + export DOXDATA=$(kde_libs_htmldir)/en/common ; \ + fi ; \ + abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\ + cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ + --no-modulename --installdir=$(kde_libs_htmldir)/en \ + $$abs_top_srcdir + +## Don't generate API documentation without doxygen +apidox-am-no: + +apidox-am-toplevel-no: + + +apidox: + @if test "$(subdir)" != "."; then \ + $(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\ + else \ + $(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\ + fi + + + +install-data-local: install-apidox + +## install API documentation +install-apidox: + @if test "$(subdir)" != "."; then \ + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \ + if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \ + echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + fi; \ + if test -d $(top_builddir)/apidocs/$(subdir)/html; then \ + list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \ + echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\ + for file in $$list; do \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \ + done; \ + fi; \ + else\ + if test -d $(top_builddir)/apidocs; then \ + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\ + list=`cd $(top_builddir)/apidocs && ls -1`; \ + echo "installing $(top_builddir)/apidocs/$$file" ;\ + echo "target directory $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs" ; \ + for file in $$list; do \ + if test -f $(top_builddir)/apidocs/$$file; then \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ + fi; \ + done ; fi; \ + fi + +uninstall-local: uninstall-apidox + +## uninstall API documentation +uninstall-apidox: + @if test "$(subdir)" != "."; then \ + if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \ + rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + fi \ + else \ + if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \ + rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ + fi \ + fi + +install-apidox-recurse: install-apidox + @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \ + list='$(SUBDIRS)'; \ + for subdir in $$list; do \ + if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am > /dev/null ; then \ + echo "Installing apidox from $$subdir"; \ + if test "$$subdir" != "."; then \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no install-apidox-recurse) || exit 1; \ + fi ; fi ;\ + done; \ + fi + + + +.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes + + +# Local Variables: +# mode: makefile +# End: diff --git a/admin/Doxyfile.global b/admin/Doxyfile.global new file mode 100755 index 0000000..1b9f560 --- /dev/null +++ b/admin/Doxyfile.global @@ -0,0 +1,192 @@ +OUTPUT_LANGUAGE = English +USE_WINDOWS_ENCODING = NO +BRIEF_MEMBER_DESC = NO +REPEAT_BRIEF = YES +ABBREVIATE_BRIEF = +ALWAYS_DETAILED_SEC = YES +INLINE_INHERITED_MEMB = NO +FULL_PATH_NAMES = NO +STRIP_FROM_PATH = +SHORT_NAMES = NO +JAVADOC_AUTOBRIEF = YES +MULTILINE_CPP_IS_BRIEF = NO +INHERIT_DOCS = YES +DISTRIBUTE_GROUP_DOC = NO +TAB_SIZE = 4 +OPTIMIZE_OUTPUT_FOR_C = NO +OPTIMIZE_OUTPUT_JAVA = NO +SUBGROUPING = YES +EXTRACT_ALL = NO +EXTRACT_PRIVATE = NO +EXTRACT_STATIC = YES +EXTRACT_LOCAL_CLASSES = NO +HIDE_UNDOC_MEMBERS = NO +HIDE_UNDOC_CLASSES = YES +HIDE_FRIEND_COMPOUNDS = NO +HIDE_IN_BODY_DOCS = NO +INTERNAL_DOCS = NO +CASE_SENSE_NAMES = YES +HIDE_SCOPE_NAMES = NO +SHOW_INCLUDE_FILES = YES +INLINE_INFO = YES +SORT_BRIEF_DOCS = NO +SORT_BY_SCOPE_NAME = NO +GENERATE_TESTLIST = NO +GENERATE_BUGLIST = YES +GENERATE_DEPRECATEDLIST= YES +ENABLED_SECTIONS = +MAX_INITIALIZER_LINES = 30 +SHOW_USED_FILES = YES +QUIET = YES +WARNINGS = NO +WARN_IF_UNDOCUMENTED = NO +WARN_IF_DOC_ERROR = YES +WARN_FORMAT = +WARN_LOGFILE = +INPUT = +FILE_PATTERNS = *.h \ + *.cpp \ + *.cc \ + *.hpp \ + *.dox \ + *.c++ \ + *.cxx \ + *.h++ \ + *.hh +RECURSIVE = YES +EXCLUDE = +EXCLUDE_SYMLINKS = NO +EXCLUDE_PATTERNS = *.moc.* \ + moc* \ + *.all_cpp.* \ + *unload.* \ + */test/* \ + */tests/* \ + *_p.h +EXAMPLE_PATH = +EXAMPLE_PATTERNS = +EXAMPLE_RECURSIVE = NO +IMAGE_PATH = +INPUT_FILTER = +FILTER_SOURCE_FILES = NO +SOURCE_BROWSER = YES +INLINE_SOURCES = NO +STRIP_CODE_COMMENTS = YES +REFERENCED_BY_RELATION = YES +REFERENCES_RELATION = YES +VERBATIM_HEADERS = YES +ALPHABETICAL_INDEX = YES +COLS_IN_ALPHA_INDEX = 3 +HTML_OUTPUT = +HTML_FILE_EXTENSION = .html +HTML_HEADER = ../apidocs/common/header.html +HTML_FOOTER = ../apidocs/common/footer.html +HTML_STYLESHEET = ../apidocs/common/doxygen.css +HTML_ALIGN_MEMBERS = YES +GENERATE_HTMLHELP = NO +CHM_FILE = +HHC_LOCATION = +GENERATE_CHI = NO +BINARY_TOC = NO +TOC_EXPAND = NO +DISABLE_INDEX = YES +ENUM_VALUES_PER_LINE = 4 +GENERATE_TREEVIEW = NO +TREEVIEW_WIDTH = 250 +GENERATE_LATEX = NO +LATEX_OUTPUT = +LATEX_CMD_NAME = latex +MAKEINDEX_CMD_NAME = makeindex +COMPACT_LATEX = NO +PAPER_TYPE = a4wide +EXTRA_PACKAGES = +LATEX_HEADER = +PDF_HYPERLINKS = NO +USE_PDFLATEX = NO +LATEX_BATCHMODE = NO +LATEX_HIDE_INDICES = NO +GENERATE_RTF = NO +RTF_OUTPUT = +COMPACT_RTF = NO +RTF_HYPERLINKS = NO +RTF_STYLESHEET_FILE = +RTF_EXTENSIONS_FILE = +GENERATE_MAN = NO +MAN_OUTPUT = +MAN_EXTENSION = .kde3 +MAN_LINKS = YES +GENERATE_XML = NO +XML_OUTPUT = xml +XML_SCHEMA = +XML_DTD = +XML_PROGRAMLISTING = NO +GENERATE_AUTOGEN_DEF = NO +GENERATE_PERLMOD = NO +PERLMOD_LATEX = NO +PERLMOD_PRETTY = YES +PERLMOD_MAKEVAR_PREFIX = +ENABLE_PREPROCESSING = YES +SEARCH_INCLUDES = YES +INCLUDE_PATH = +INCLUDE_FILE_PATTERNS = +PREDEFINED = QT_VERSION=320 \ + __cplusplus \ + Q_WS_X11 +EXPAND_AS_DEFINED = +SKIP_FUNCTION_MACROS = YES +TAGFILES = +GENERATE_TAGFILE = +ALLEXTERNALS = NO +EXTERNAL_GROUPS = NO +PERL_PATH = +CLASS_DIAGRAMS = YES +HIDE_UNDOC_RELATIONS = NO +HAVE_DOT = NO +UML_LOOK = NO +TEMPLATE_RELATIONS = YES +INCLUDE_GRAPH = YES +INCLUDED_BY_GRAPH = YES +CALL_GRAPH = NO +GRAPHICAL_HIERARCHY = YES +DOT_IMAGE_FORMAT = png +DOT_PATH = +DOTFILE_DIRS = +MAX_DOT_GRAPH_WIDTH = 800 +MAX_DOT_GRAPH_HEIGHT = 1024 +MAX_DOT_GRAPH_DEPTH = 0 +GENERATE_LEGEND = YES +DOT_CLEANUP = YES +SEARCHENGINE = NO + +### KDE Settings +ALIASES = \ + "intern=\par<b>Internal use only.</b>" \ + "reimp=\par<b>Reimplemented from superclass.</b>" \ + "obsolete=@deprecated" \ + "feature=\xrefitem features \"Feature(s)\" \"Features\"" \ + "maintainer=\xrefitem maintainers \"Maintainer(s)\" \"Maintainers\"" \ + "unmaintained=\xrefitem unmaintained \"Unmaintained\" \"Unmaintained\"" \ + "requirement=\xrefitem requirements \"Requirement(s)\" \"Requirements\"" \ + "faq=\xrefitem FAQ \"F.A.Q.\" \"F.A.Q.\"" \ + "authors=\xrefitem authors \"Author(s)\" \"Authors\"" \ + "FIXME=\xrefitem fixme \"Fixme\" \"Fixme\"" + +HTML_ALIGN_MEMBERS = YES +REFERENCED_BY_RELATION = NO +REFERENCES_RELATION = NO +VERBATIM_HEADERS = NO +GENERATE_HTML = YES +SOURCE_BROWSER = YES +GENERATE_AUTOGEN_DEF = NO +DETAILS_AT_TOP = YES +SORT_MEMBER_DOCS = YES +GENERATE_TODOLIST = YES +IGNORE_PREFIX = K +GENERATE_HTML = YES +CLASS_GRAPH = YES +COLLABORATION_GRAPH = NO + + +MACRO_EXPANSION = YES +EXPAND_ONLY_PREDEF = YES + diff --git a/admin/Makefile.common b/admin/Makefile.common new file mode 100644 index 0000000..d07b404 --- /dev/null +++ b/admin/Makefile.common @@ -0,0 +1,37 @@ +### Makefile.common +### +### Copyright (C) 2002 by the KDE developers + +### All the real work is done by the shellscript cvs.sh + +SHELL=/bin/sh + +cvs dist configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages: + @admindir=$(admindir); \ + if test "x$$admindir" = x; then \ + admindir=.; until test -f $$admindir/admin/cvs.sh; do \ + admindir=$$admindir/..; \ + if test `cd $$admindir && pwd` = / ; then break; fi; \ + done; \ + admindir=$$admindir/admin; \ + if test -f $$admindir/cvs.sh; then :; else \ + echo "Can't find the admin/ directory in any parent of the"; \ + echo "current directory. Please set it with admindir=..."; \ + exit 1; \ + fi; \ + fi; \ + if test "$@" = "package-merge"; then \ + MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \ + $(SHELL) $$admindir/cvs.sh package-merge ;\ + else \ + MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\ + fi + +configure.in: configure.files subdirs +configure.files: subdirs + +svn: cvs + +.SILENT: + +.PHONY: svn cvs dist package-merge package-messages diff --git a/admin/acinclude.m4.in b/admin/acinclude.m4.in new file mode 100644 index 0000000..27476d4 --- /dev/null +++ b/admin/acinclude.m4.in @@ -0,0 +1,5972 @@ +## -*- autoconf -*- + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) +dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +dnl IMPORTANT NOTE: +dnl Please do not modify this file unless you expect your modifications to be +dnl carried into every other module in the repository. +dnl +dnl Single-module modifications are best placed in configure.in for kdelibs +dnl and kdebase or configure.in.in if present. + +# KDE_PATH_X_DIRECT +dnl Internal subroutine of AC_PATH_X. +dnl Set ac_x_includes and/or ac_x_libraries. +AC_DEFUN([KDE_PATH_X_DIRECT], +[ +AC_REQUIRE([KDE_CHECK_LIB64]) + +if test "$ac_x_includes" = NO; then + # Guess where to find include files, by looking for this one X11 .h file. + test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h + + # First, try using that file with no special directory specified. +AC_TRY_CPP([#include <$x_direct_test_include>], +[# We can compile using X headers with no special include directory. +ac_x_includes=], +[# Look for the header file in a standard set of common directories. +# Check X11 before X11Rn because it is often a symlink to the current release. + for ac_dir in \ + /usr/X11/include \ + /usr/X11R6/include \ + /usr/X11R5/include \ + /usr/X11R4/include \ + \ + /usr/include/X11 \ + /usr/include/X11R6 \ + /usr/include/X11R5 \ + /usr/include/X11R4 \ + \ + /usr/local/X11/include \ + /usr/local/X11R6/include \ + /usr/local/X11R5/include \ + /usr/local/X11R4/include \ + \ + /usr/local/include/X11 \ + /usr/local/include/X11R6 \ + /usr/local/include/X11R5 \ + /usr/local/include/X11R4 \ + \ + /usr/X386/include \ + /usr/x386/include \ + /usr/XFree86/include/X11 \ + \ + /usr/include \ + /usr/local/include \ + /usr/unsupported/include \ + /usr/athena/include \ + /usr/local/x11r5/include \ + /usr/lpp/Xamples/include \ + \ + /usr/openwin/include \ + /usr/openwin/share/include \ + ; \ + do + if test -r "$ac_dir/$x_direct_test_include"; then + ac_x_includes=$ac_dir + break + fi + done]) +fi # $ac_x_includes = NO + +if test "$ac_x_libraries" = NO; then + # Check for the libraries. + + test -z "$x_direct_test_library" && x_direct_test_library=Xt + test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc + + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS="$LIBS" + LIBS="-l$x_direct_test_library $LIBS" +AC_TRY_LINK([#include <X11/Intrinsic.h>], [${x_direct_test_function}(1)], +[LIBS="$ac_save_LIBS" +# We can link X programs with no special library path. +ac_x_libraries=], +[LIBS="$ac_save_LIBS" +# First see if replacing the include by lib works. +# Check X11 before X11Rn because it is often a symlink to the current release. +for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \ + /usr/X11/lib${kdelibsuff} \ + /usr/X11R6/lib${kdelibsuff} \ + /usr/X11R5/lib${kdelibsuff} \ + /usr/X11R4/lib${kdelibsuff} \ + \ + /usr/lib${kdelibsuff}/X11 \ + /usr/lib${kdelibsuff}/X11R6 \ + /usr/lib${kdelibsuff}/X11R5 \ + /usr/lib${kdelibsuff}/X11R4 \ + \ + /usr/local/X11/lib${kdelibsuff} \ + /usr/local/X11R6/lib${kdelibsuff} \ + /usr/local/X11R5/lib${kdelibsuff} \ + /usr/local/X11R4/lib${kdelibsuff} \ + \ + /usr/local/lib${kdelibsuff}/X11 \ + /usr/local/lib${kdelibsuff}/X11R6 \ + /usr/local/lib${kdelibsuff}/X11R5 \ + /usr/local/lib${kdelibsuff}/X11R4 \ + \ + /usr/X386/lib${kdelibsuff} \ + /usr/x386/lib${kdelibsuff} \ + /usr/XFree86/lib${kdelibsuff}/X11 \ + \ + /usr/lib${kdelibsuff} \ + /usr/local/lib${kdelibsuff} \ + /usr/unsupported/lib${kdelibsuff} \ + /usr/athena/lib${kdelibsuff} \ + /usr/local/x11r5/lib${kdelibsuff} \ + /usr/lpp/Xamples/lib${kdelibsuff} \ + /lib/usr/lib${kdelibsuff}/X11 \ + \ + /usr/openwin/lib${kdelibsuff} \ + /usr/openwin/share/lib${kdelibsuff} \ + ; \ +do +dnl Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do + if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done]) +fi # $ac_x_libraries = NO +]) + + +dnl ------------------------------------------------------------------------ +dnl Find a file (or one of more files in a list of dirs) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_FIND_FILE], +[ +$3=NO +for i in $2; +do + for j in $1; + do + echo "configure: __oline__: $i/$j" >&AC_FD_CC + if test -r "$i/$j"; then + echo "taking that" >&AC_FD_CC + $3=$i + break 2 + fi + done +done +]) + +dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, +dnl if-not-found, test-parameter, prepend-path) +dnl +dnl Look for program-name in list-of-dirs+$PATH. +dnl If prepend-path is set, look in $PATH+list-of-dirs instead. +dnl If found, $variable-name is set. If not, if-not-found is evaluated. +dnl test-parameter: if set, the program is executed with this arg, +dnl and only a successful exit code is required. +AC_DEFUN([KDE_FIND_PATH], +[ + AC_MSG_CHECKING([for $1]) + if test -n "$$2"; then + kde_cv_path="$$2"; + else + kde_cache=`echo $1 | sed 'y%./+-%__p_%'` + + AC_CACHE_VAL(kde_cv_path_$kde_cache, + [ + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + dirs="" + for dir in $PATH; do + dirs="$dirs $dir" + done + if test -z "$6"; then dnl Append dirs in PATH (default) + dirs="$3 $dirs" + else dnl Prepend dirs in PATH (if 6th arg is set) + dirs="$dirs $3" + fi + IFS=$kde_save_IFS + + for dir in $dirs; do + if test -x "$dir/$1"; then + if test -n "$5" + then + evalstr="$dir/$1 $5 2>&1 " + if eval $evalstr; then + kde_cv_path="$dir/$1" + break + fi + else + kde_cv_path="$dir/$1" + break + fi + fi + done + + eval "kde_cv_path_$kde_cache=$kde_cv_path" + + ]) + + eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" + + fi + + if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then + AC_MSG_RESULT(not found) + $4 + else + AC_MSG_RESULT($kde_cv_path) + $2=$kde_cv_path + + fi +]) + +AC_DEFUN([KDE_MOC_ERROR_MESSAGE], +[ + AC_MSG_ERROR([No Qt meta object compiler (moc) found! +Please check whether you installed Qt correctly. +You need to have a running moc binary. +configure tried to run $ac_cv_path_moc and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable MOC to the right one before running +configure. +]) +]) + +AC_DEFUN([KDE_UIC_ERROR_MESSAGE], +[ + AC_MSG_WARN([No Qt ui compiler (uic) found! +Please check whether you installed Qt correctly. +You need to have a running uic binary. +configure tried to run $ac_cv_path_uic and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable UIC to the right one before running +configure. +]) +]) + + +AC_DEFUN([KDE_CHECK_UIC_FLAG], +[ + AC_MSG_CHECKING([whether uic supports -$1 ]) + kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` + AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, + [ + cat >conftest.ui <<EOT + <!DOCTYPE UI><UI version="3" stdsetdef="1"></UI> +EOT + ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" + if AC_TRY_EVAL(ac_uic_testrun); then + eval "kde_cv_prog_uic_$kde_cache=yes" + else + eval "kde_cv_prog_uic_$kde_cache=no" + fi + rm -f conftest* + ]) + + if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then + AC_MSG_RESULT([yes]) + : + $3 + else + AC_MSG_RESULT([no]) + : + $4 + fi +]) + + +dnl ------------------------------------------------------------------------ +dnl Find the meta object compiler and the ui compiler in the PATH, +dnl in $QTDIR/bin, and some more usual places +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_MOC_UIC], +[ + AC_REQUIRE([KDE_CHECK_PERL]) + qt_bindirs="" + for dir in $kde_qt_dirs; do + qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" + done + qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" + if test ! "$ac_qt_bindir" = "NO"; then + qt_bindirs="$ac_qt_bindir $qt_bindirs" + fi + + KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) + if test -z "$UIC_NOT_NEEDED"; then + KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) + if test -z "$UIC_PATH" ; then + KDE_UIC_ERROR_MESSAGE + exit 1 + else + UIC=$UIC_PATH + + if test $kde_qtver = 3; then + KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) + KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) + + if test x$ac_uic_supports_libpath = xyes; then + UIC="$UIC -L \$(kde_widgetdir)" + fi + if test x$ac_uic_supports_nounload = xyes; then + UIC="$UIC -nounload" + fi + fi + fi + else + UIC="echo uic not available: " + fi + + AC_SUBST(MOC) + AC_SUBST(UIC) + + UIC_TR="i18n" + if test $kde_qtver = 3; then + UIC_TR="tr2i18n" + fi + + AC_SUBST(UIC_TR) +]) + +AC_DEFUN([KDE_1_CHECK_PATHS], +[ + KDE_1_CHECK_PATH_HEADERS + + KDE_TEST_RPATH= + + if test -n "$USE_RPATH"; then + + if test -n "$kde_libraries"; then + KDE_TEST_RPATH="-R $kde_libraries" + fi + + if test -n "$qt_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" + fi + + if test -n "$x_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" + fi + + KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" + fi + +AC_MSG_CHECKING([for KDE libraries installed]) +ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR([your system fails at linking a small KDE application! +Check, if your compiler is installed correctly and if you have used the +same compiler to compile Qt and kdelibs as you did use now. +For more details about this problem, look at the end of config.log.]) +fi + +if eval `KDEDIR= ./conftest 2>&5`; then + kde_result=done +else + kde_result=problems +fi + +KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log +kde_have_all_paths=yes + +KDE_SET_PATHS($kde_result) + +]) + +AC_DEFUN([KDE_SET_PATHS], +[ + kde_cv_all_paths="kde_have_all_paths=\"yes\" \ + kde_htmldir=\"$kde_htmldir\" \ + kde_appsdir=\"$kde_appsdir\" \ + kde_icondir=\"$kde_icondir\" \ + kde_sounddir=\"$kde_sounddir\" \ + kde_datadir=\"$kde_datadir\" \ + kde_locale=\"$kde_locale\" \ + kde_cgidir=\"$kde_cgidir\" \ + kde_confdir=\"$kde_confdir\" \ + kde_kcfgdir=\"$kde_kcfgdir\" \ + kde_mimedir=\"$kde_mimedir\" \ + kde_toolbardir=\"$kde_toolbardir\" \ + kde_wallpaperdir=\"$kde_wallpaperdir\" \ + kde_templatesdir=\"$kde_templatesdir\" \ + kde_bindir=\"$kde_bindir\" \ + kde_servicesdir=\"$kde_servicesdir\" \ + kde_servicetypesdir=\"$kde_servicetypesdir\" \ + kde_moduledir=\"$kde_moduledir\" \ + kde_styledir=\"$kde_styledir\" \ + kde_widgetdir=\"$kde_widgetdir\" \ + xdg_appsdir=\"$xdg_appsdir\" \ + xdg_menudir=\"$xdg_menudir\" \ + xdg_directorydir=\"$xdg_directorydir\" \ + kde_result=$1" +]) + +AC_DEFUN([KDE_SET_DEFAULT_PATHS], +[ +if test "$1" = "default"; then + + if test -z "$kde_htmldir"; then + kde_htmldir='\${datadir}/doc/HTML' + fi + if test -z "$kde_appsdir"; then + kde_appsdir='\${datadir}/applnk' + fi + if test -z "$kde_icondir"; then + kde_icondir='\${datadir}/icons' + fi + if test -z "$kde_sounddir"; then + kde_sounddir='\${datadir}/sounds' + fi + if test -z "$kde_datadir"; then + kde_datadir='\${datadir}/apps' + fi + if test -z "$kde_locale"; then + kde_locale='\${datadir}/locale' + fi + if test -z "$kde_cgidir"; then + kde_cgidir='\${exec_prefix}/cgi-bin' + fi + if test -z "$kde_confdir"; then + kde_confdir='\${datadir}/config' + fi + if test -z "$kde_kcfgdir"; then + kde_kcfgdir='\${datadir}/config.kcfg' + fi + if test -z "$kde_mimedir"; then + kde_mimedir='\${datadir}/mimelnk' + fi + if test -z "$kde_toolbardir"; then + kde_toolbardir='\${datadir}/toolbar' + fi + if test -z "$kde_wallpaperdir"; then + kde_wallpaperdir='\${datadir}/wallpapers' + fi + if test -z "$kde_templatesdir"; then + kde_templatesdir='\${datadir}/templates' + fi + if test -z "$kde_bindir"; then + kde_bindir='\${exec_prefix}/bin' + fi + if test -z "$kde_servicesdir"; then + kde_servicesdir='\${datadir}/services' + fi + if test -z "$kde_servicetypesdir"; then + kde_servicetypesdir='\${datadir}/servicetypes' + fi + if test -z "$kde_moduledir"; then + if test "$kde_qtver" = "2"; then + kde_moduledir='\${libdir}/kde2' + else + kde_moduledir='\${libdir}/kde3' + fi + fi + if test -z "$kde_styledir"; then + kde_styledir='\${libdir}/kde3/plugins/styles' + fi + if test -z "$kde_widgetdir"; then + kde_widgetdir='\${libdir}/kde3/plugins/designer' + fi + if test -z "$xdg_appsdir"; then + xdg_appsdir='\${datadir}/applications/kde' + fi + if test -z "$xdg_menudir"; then + xdg_menudir='\${sysconfdir}/xdg/menus' + fi + if test -z "$xdg_directorydir"; then + xdg_directorydir='\${datadir}/desktop-directories' + fi + + KDE_SET_PATHS(defaults) + +else + + if test $kde_qtver = 1; then + AC_MSG_RESULT([compiling]) + KDE_1_CHECK_PATHS + else + AC_MSG_ERROR([path checking not yet supported for KDE 2]) + fi + +fi +]) + +AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], +[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || + test -z "$kde_icondir" || test -z "$kde_sounddir" || + test -z "$kde_datadir" || test -z "$kde_locale" || + test -z "$kde_cgidir" || test -z "$kde_confdir" || + test -z "$kde_kcfgdir" || + test -z "$kde_mimedir" || test -z "$kde_toolbardir" || + test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || + test -z "$kde_bindir" || test -z "$kde_servicesdir" || + test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || + test -z "$kde_styledir" || test -z "kde_widgetdir" || + test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || + test "x$kde_have_all_paths" != "xyes"; then + kde_have_all_paths=no + fi +]) + +AC_DEFUN([KDE_MISSING_PROG_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed KDE correctly. +]) +]) + +AC_DEFUN([KDE_MISSING_ARTS_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed aRts correctly or use +--without-arts to compile without aRts support (this will remove functionality). +]) +]) + +AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], +[ + kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" + test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs" + if test -n "$KDEDIRS"; then + kde_save_IFS=$IFS + IFS=: + for dir in $KDEDIRS; do + kde_default_bindirs="$dir/bin $kde_default_bindirs " + done + IFS=$kde_save_IFS + fi +]) + +AC_DEFUN([KDE_SUBST_PROGRAMS], +[ + AC_ARG_WITH(arts, + AC_HELP_STRING([--without-arts],[build without aRts [default=no]]), + [build_arts=$withval], + [build_arts=yes] + ) + AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no") + if test "$build_arts" = "no"; then + AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts]) + fi + + KDE_SET_DEFAULT_BINDIRS + kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" + KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) + KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) + if test "$build_arts" '!=' "no"; then + KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) + KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) + fi + KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) + + kde32ornewer=1 + kde33ornewer=1 + if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then + kde32ornewer= + kde33ornewer= + else + if test "$kde_qtver" = "3"; then + if test "$kde_qtsubver" -le 1; then + kde32ornewer= + fi + if test "$kde_qtsubver" -le 2; then + kde33ornewer= + fi + if test "$KDECONFIG" != "compiled"; then + if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then + kde33ornewer= + fi + fi + fi + fi + + if test -n "$kde32ornewer"; then + KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)]) + KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) + fi + if test -n "$kde33ornewer"; then + KDE_FIND_PATH(makekdewidgets, MAKEKDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(makekdewidgets)]) + AC_SUBST(MAKEKDEWIDGETS) + fi + KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""]) + + if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then + kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" + test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" + AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) + if test "$KDE_XSL_STYLESHEET" = "NO"; then + KDE_XSL_STYLESHEET="" + else + KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" + fi + fi + + DCOP_DEPENDENCIES='$(DCOPIDL)' + if test -n "$kde32ornewer"; then + KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' + DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' + AC_SUBST(KCONFIG_COMPILER) + AC_SUBST(KCFG_DEPENDENCIES) + AC_SUBST(DCOPIDLNG) + fi + AC_SUBST(DCOPIDL) + AC_SUBST(DCOPIDL2CPP) + AC_SUBST(DCOP_DEPENDENCIES) + AC_SUBST(MCOPIDL) + AC_SUBST(ARTSCCONFIG) + AC_SUBST(MEINPROC) + AC_SUBST(KDE_XSL_STYLESHEET) + AC_SUBST(XMLLINT) +])dnl + +AC_DEFUN([AC_CREATE_KFSSTND], +[ +AC_REQUIRE([AC_CHECK_RPATH]) + +AC_MSG_CHECKING([for KDE paths]) +kde_result="" +kde_cached_paths=yes +AC_CACHE_VAL(kde_cv_all_paths, +[ + KDE_SET_DEFAULT_PATHS($1) + kde_cached_paths=no +]) +eval "$kde_cv_all_paths" +KDE_CHECK_PATHS_FOR_COMPLETENESS +if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then + # wrong values were cached, may be, we can set better ones + kde_result= + kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= + kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= + kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= + kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= + kde_have_all_paths= + kde_styledir= + kde_widgetdir= + xdg_appsdir = xdg_menudir= xdg_directorydir= + KDE_SET_DEFAULT_PATHS($1) + eval "$kde_cv_all_paths" + KDE_CHECK_PATHS_FOR_COMPLETENESS + kde_result="$kde_result (cache overridden)" +fi +if test "$kde_have_all_paths" = "no"; then + AC_MSG_ERROR([configure could not run a little KDE program to test the environment. +Since it had compiled and linked before, it must be a strange problem on your system. +Look at config.log for details. If you are not able to fix this, look at +http://www.kde.org/faq/installation.html or any www.kde.org mirror. +(If you're using an egcs version on Linux, you may update binutils!) +]) +else + rm -f conftest* + AC_MSG_RESULT($kde_result) +fi + +bindir=$kde_bindir + +KDE_SUBST_PROGRAMS + +]) + +AC_DEFUN([AC_SUBST_KFSSTND], +[ +AC_SUBST(kde_htmldir) +AC_SUBST(kde_appsdir) +AC_SUBST(kde_icondir) +AC_SUBST(kde_sounddir) +AC_SUBST(kde_datadir) +AC_SUBST(kde_locale) +AC_SUBST(kde_confdir) +AC_SUBST(kde_kcfgdir) +AC_SUBST(kde_mimedir) +AC_SUBST(kde_wallpaperdir) +AC_SUBST(kde_bindir) +dnl X Desktop Group standards +AC_SUBST(xdg_appsdir) +AC_SUBST(xdg_menudir) +AC_SUBST(xdg_directorydir) +dnl for KDE 2 +AC_SUBST(kde_templatesdir) +AC_SUBST(kde_servicesdir) +AC_SUBST(kde_servicetypesdir) +AC_SUBST(kde_moduledir) +AC_SUBST(kdeinitdir, '$(kde_moduledir)') +AC_SUBST(kde_styledir) +AC_SUBST(kde_widgetdir) +if test "$kde_qtver" = 1; then + kde_minidir="$kde_icondir/mini" +else +# for KDE 1 - this breaks KDE2 apps using minidir, but +# that's the plan ;-/ + kde_minidir="/dev/null" +fi +dnl AC_SUBST(kde_minidir) +dnl AC_SUBST(kde_cgidir) +dnl AC_SUBST(kde_toolbardir) +]) + +AC_DEFUN([KDE_MISC_TESTS], +[ + dnl Checks for libraries. + AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD + AC_SUBST(LIBUTIL) + AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD + AC_SUBST(LIBCOMPAT) + kde_have_crypt= + AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], + AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ + AC_MSG_WARN([you have no crypt in either libcrypt or libc. +You should install libcrypt from another source or configure with PAM +support]) + kde_have_crypt=no + ])) + AC_SUBST(LIBCRYPT) + if test $kde_have_crypt = yes; then + AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) + fi + AC_CHECK_SOCKLEN_T + AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + AC_CHECK_LIB(dnet_stub, dnet_ntoa, + [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) + fi + AC_CHECK_FUNC(inet_ntoa) + if test $ac_cv_func_inet_ntoa = no; then + AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") + fi + AC_CHECK_FUNC(connect) + if test $ac_cv_func_connect = no; then + AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , + $X_EXTRA_LIBS) + fi + + AC_CHECK_FUNC(remove) + if test $ac_cv_func_remove = no; then + AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + AC_CHECK_FUNC(shmat, , + AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) + + # more headers that need to be explicitly included on darwin + AC_CHECK_HEADERS(sys/types.h stdint.h) + + # sys/bitypes.h is needed for uint32_t and friends on Tru64 + AC_CHECK_HEADERS(sys/bitypes.h) + + # darwin requires a poll emulation library + AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") + + # for some image handling on Mac OS X + AC_CHECK_HEADERS(Carbon/Carbon.h) + + # CoreAudio framework + AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ + AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) + FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio" + ]) + + AC_CHECK_RES_INIT + AC_SUBST(LIB_POLL) + AC_SUBST(FRAMEWORK_COREAUDIO) + LIBSOCKET="$X_EXTRA_LIBS" + AC_SUBST(LIBSOCKET) + AC_SUBST(X_EXTRA_LIBS) + AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 + AC_SUBST(LIBUCB) + + case $host in dnl this *is* LynxOS specific + *-*-lynxos* ) + AC_MSG_CHECKING([LynxOS header file wrappers]) + [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] + AC_MSG_RESULT(disabled) + AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS + ;; + esac + + KDE_CHECK_TYPES + KDE_CHECK_LIBDL + KDE_CHECK_STRLCPY + KDE_CHECK_PIE_SUPPORT + +# darwin needs this to initialize the environment +AC_CHECK_HEADERS(crt_externs.h) +AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) + +AH_VERBATIM(_DARWIN_ENVIRON, +[ +#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) +# include <sys/time.h> +# include <crt_externs.h> +# define environ (*_NSGetEnviron()) +#endif +]) + +AH_VERBATIM(_AIX_STRINGS_H_BZERO, +[ +/* + * AIX defines FD_SET in terms of bzero, but fails to include <strings.h> + * that defines bzero. + */ + +#if defined(_AIX) +#include <strings.h> +#endif +]) + +AC_CHECK_FUNCS([vsnprintf snprintf]) + +AH_VERBATIM(_TRU64,[ +/* + * On HP-UX, the declaration of vsnprintf() is needed every time ! + */ + +#if !defined(HAVE_VSNPRINTF) || defined(hpux) +#if __STDC__ +#include <stdarg.h> +#include <stdlib.h> +#else +#include <varargs.h> +#endif +#ifdef __cplusplus +extern "C" +#endif +int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); +#ifdef __cplusplus +extern "C" +#endif +int snprintf(char *str, size_t n, char const *fmt, ...); +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Find the header files and libraries for X-Windows. Extended the +dnl macro AC_PATH_X +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([K_PATH_X], +[ +AC_REQUIRE([KDE_MISC_TESTS])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_ARG_ENABLE( + embedded, + AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), + kde_use_qt_emb=$enableval, + kde_use_qt_emb=no +) + +AC_ARG_ENABLE( + qtopia, + AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), + kde_use_qt_emb_palm=$enableval, + kde_use_qt_emb_palm=no +) + +AC_ARG_ENABLE( + mac, + AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), + kde_use_qt_mac=$enableval, + kde_use_qt_mac=no +) + +# used to disable x11-specific stuff on special platforms +AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no") + +if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then + +AC_MSG_CHECKING(for X) + +AC_CACHE_VAL(kde_cv_have_x, +[# One or both of the vars are not set, and there is no cached value. +if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then + kde_x_includes=NO +else + kde_x_includes=$x_includes +fi +if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then + kde_x_libraries=NO +else + kde_x_libraries=$x_libraries +fi + +# below we use the standard autoconf calls +ac_x_libraries=$kde_x_libraries +ac_x_includes=$kde_x_includes + +KDE_PATH_X_DIRECT +dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. +dnl Unfortunately, if compiling with the N32 ABI, this is not the correct +dnl location. The correct location is /usr/lib32 or an undefined value +dnl (the linker is smart enough to pick the correct default library). +dnl Things work just fine if you use just AC_PATH_X_DIRECT. +dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to +dnl /usr/openwin/include, which doesn't work. /usr/include does work, so +dnl x_includes should be left alone. +case "$host" in +mips-sgi-irix6*) + ;; +*-*-solaris*) + ;; +*) + _AC_PATH_X_XMKMF + if test -z "$ac_x_includes"; then + ac_x_includes="." + fi + if test -z "$ac_x_libraries"; then + ac_x_libraries="/usr/lib${kdelibsuff}" + fi +esac +#from now on we use our own again + +# when the user already gave --x-includes, we ignore +# what the standard autoconf macros told us. +if test "$kde_x_includes" = NO; then + kde_x_includes=$ac_x_includes +fi + +# for --x-libraries too +if test "$kde_x_libraries" = NO; then + kde_x_libraries=$ac_x_libraries +fi + +if test "$kde_x_includes" = NO; then + AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) +fi + +if test "$kde_x_libraries" = NO; then + AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) +fi + +# Record where we found X for the cache. +kde_cv_have_x="have_x=yes \ + kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" +])dnl + +eval "$kde_cv_have_x" + +if test "$have_x" != yes; then + AC_MSG_RESULT($have_x) + no_x=yes +else + AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) +fi + +if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then + X_INCLUDES="" + x_includes="."; dnl better than nothing :- + else + x_includes=$kde_x_includes + X_INCLUDES="-I$x_includes" +fi + +if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then + X_LDFLAGS="" + x_libraries="/usr/lib"; dnl better than nothing :- + else + x_libraries=$kde_x_libraries + X_LDFLAGS="-L$x_libraries" +fi +all_includes="$X_INCLUDES" +all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS" + +# Check for libraries that X11R6 Xt/Xaw programs need. +ac_save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $X_LDFLAGS" +# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to +# check for ICE first), but we must link in the order -lSM -lICE or +# we get undefined symbols. So assume we have SM if we have ICE. +# These have to be linked with before -lX11, unlike the other +# libraries we check for below, so use a different variable. +# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. +AC_CHECK_LIB(ICE, IceConnectionNumber, + [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) +LDFLAGS="$ac_save_LDFLAGS" + +LIB_X11='-lX11 $(LIBSOCKET)' + +AC_MSG_CHECKING(for libXext) +AC_CACHE_VAL(kde_cv_have_libXext, +[ +kde_ldflags_safe="$LDFLAGS" +kde_libs_safe="$LIBS" + +LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" +LIBS="-lXext -lX11 $LIBSOCKET" + +AC_TRY_LINK([ +#include <stdio.h> +#ifdef STDC_HEADERS +# include <stdlib.h> +#endif +], +[ +printf("hello Xext\n"); +], +kde_cv_have_libXext=yes, +kde_cv_have_libXext=no +) + +LDFLAGS=$kde_ldflags_safe +LIBS=$kde_libs_safe +]) + +AC_MSG_RESULT($kde_cv_have_libXext) + +if test "$kde_cv_have_libXext" = "no"; then + AC_MSG_ERROR([We need a working libXext to proceed. Since configure +can't find it itself, we stop here assuming that make wouldn't find +them either.]) +fi + +LIB_XEXT="-lXext" +QTE_NORTTI="" + +elif test "$kde_use_qt_emb" = "yes"; then + dnl We're using QT Embedded + CPPFLAGS=-DQWS + CXXFLAGS="$CXXFLAGS -fno-rtti" + QTE_NORTTI="-fno-rtti -DQWS" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +elif test "$kde_use_qt_mac" = "yes"; then + dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to + dnl be included to get the information) --Sam + CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" + CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +fi +AC_SUBST(X_PRE_LIBS) +AC_SUBST(LIB_X11) +AC_SUBST(LIB_XRENDER) +AC_SUBST(LIBSM) +AC_SUBST(X_INCLUDES) +AC_SUBST(X_LDFLAGS) +AC_SUBST(x_includes) +AC_SUBST(x_libraries) +AC_SUBST(QTE_NORTTI) +AC_SUBST(LIB_XEXT) + +]) + +AC_DEFUN([KDE_PRINT_QT_PROGRAM], +[ +AC_REQUIRE([KDE_USE_QT]) +cat > conftest.$ac_ext <<EOF +#include "confdefs.h" +#include <qglobal.h> +#include <qapplication.h> +EOF +if test "$kde_qtver" = "2"; then +cat >> conftest.$ac_ext <<EOF +#include <qevent.h> +#include <qstring.h> +#include <qstyle.h> +EOF + +if test $kde_qtsubver -gt 0; then +cat >> conftest.$ac_ext <<EOF +#if QT_VERSION < 210 +#error 1 +#endif +EOF +fi +fi + +if test "$kde_qtver" = "3"; then +cat >> conftest.$ac_ext <<EOF +#include <qcursor.h> +#include <qstylefactory.h> +#include <private/qucomextra_p.h> +EOF +fi + +echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext +cat >> conftest.$ac_ext <<EOF +#error 1 +#endif + +int main() { +EOF +if test "$kde_qtver" = "2"; then +cat >> conftest.$ac_ext <<EOF + QStringList *t = new QStringList(); + Q_UNUSED(t); +EOF +if test $kde_qtsubver -gt 0; then +cat >> conftest.$ac_ext <<EOF + QString s; + s.setLatin1("Elvis is alive", 14); +EOF +fi +fi +if test "$kde_qtver" = "3"; then +cat >> conftest.$ac_ext <<EOF + (void)QStyleFactory::create(QString::null); + QCursor c(Qt::WhatsThisCursor); +EOF +fi +cat >> conftest.$ac_ext <<EOF + return 0; +} +EOF +]) + +AC_DEFUN([KDE_USE_QT], +[ +if test -z "$1"; then + # Current default Qt version: 3.3 + kde_qtver=3 + kde_qtsubver=3 +else + kde_qtsubver=`echo "$1" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'` + # following is the check if subversion isnt found in passed argument + if test "$kde_qtsubver" = "$1"; then + kde_qtsubver=1 + fi + kde_qtver=`echo "$1" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'` + if test "$kde_qtver" = "1"; then + kde_qtsubver=42 + fi +fi + +if test -z "$2"; then + if test "$kde_qtver" = "2"; then + if test $kde_qtsubver -gt 0; then + kde_qt_minversion=">= Qt 2.2.2" + else + kde_qt_minversion=">= Qt 2.0.2" + fi + fi + if test "$kde_qtver" = "3"; then + if test $kde_qtsubver -gt 0; then + if test $kde_qtsubver -gt 1; then + if test $kde_qtsubver -gt 2; then + kde_qt_minversion=">= Qt 3.3 and < 4.0" + else + kde_qt_minversion=">= Qt 3.2 and < 4.0" + fi + else + kde_qt_minversion=">= Qt 3.1 (20021021) and < 4.0" + fi + else + kde_qt_minversion=">= Qt 3.0 and < 4.0" + fi + fi + if test "$kde_qtver" = "1"; then + kde_qt_minversion=">= 1.42 and < 2.0" + fi +else + kde_qt_minversion="$2" +fi + +if test -z "$3"; then + if test $kde_qtver = 3; then + if test $kde_qtsubver -gt 0; then + kde_qt_verstring="QT_VERSION >= 0x03@VER@00 && QT_VERSION < 0x040000" + qtsubver=`echo "00$kde_qtsubver" | sed -e 's,.*\(..\)$,\1,'` + kde_qt_verstring=`echo $kde_qt_verstring | sed -e "s,@VER@,$qtsubver,"` + else + kde_qt_verstring="QT_VERSION >= 300 && QT_VERSION < 0x040000" + fi + fi + if test $kde_qtver = 2; then + if test $kde_qtsubver -gt 0; then + kde_qt_verstring="QT_VERSION >= 222" + else + kde_qt_verstring="QT_VERSION >= 200" + fi + fi + if test $kde_qtver = 1; then + kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200" + fi +else + kde_qt_verstring="$3" +fi + +if test $kde_qtver = 4; then + kde_qt_dirs="$QTDIR /usr/lib/qt4 /usr/lib/qt /usr/share/qt4" +fi +if test $kde_qtver = 3; then + kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3" +fi +if test $kde_qtver = 2; then + kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt" +fi +if test $kde_qtver = 1; then + kde_qt_dirs="$QTDIR /usr/lib/qt" +fi +]) + +AC_DEFUN([KDE_CHECK_QT_DIRECT], +[ +AC_REQUIRE([KDE_USE_QT]) +AC_MSG_CHECKING([if Qt compiles without flags]) +AC_CACHE_VAL(kde_cv_qt_direct, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH +ac_LIBRARY_PATH="$LIBRARY_PATH" +ac_cxxflags_safe="$CXXFLAGS" +ac_ldflags_safe="$LDFLAGS" +ac_libs_safe="$LIBS" + +CXXFLAGS="$CXXFLAGS -I$qt_includes" +LDFLAGS="$LDFLAGS $X_LDFLAGS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$LIBQT -lXext -lX11 $LIBSOCKET" +else +LIBS="$LIBQT $LIBSOCKET" +fi +LD_LIBRARY_PATH= +export LD_LIBRARY_PATH +LIBRARY_PATH= +export LIBRARY_PATH + +KDE_PRINT_QT_PROGRAM + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + kde_cv_qt_direct="yes" +else + kde_cv_qt_direct="no" + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC +fi + +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" +export LD_LIBRARY_PATH +LIBRARY_PATH="$ac_LIBRARY_PATH" +export LIBRARY_PATH +AC_LANG_RESTORE +]) + +if test "$kde_cv_qt_direct" = "yes"; then + AC_MSG_RESULT(yes) + $1 +else + AC_MSG_RESULT(no) + $2 +fi +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the Qt headers and libraries. +dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) +dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_1_3], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([KDE_USE_QT]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +dnl ------------------------------------------------------------------------ +dnl Add configure flag to enable linking to MT version of Qt library. +dnl ------------------------------------------------------------------------ + +AC_ARG_ENABLE( + mt, + AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), + kde_use_qt_mt=$enableval, + [ + if test $kde_qtver = 3; then + kde_use_qt_mt=yes + else + kde_use_qt_mt=no + fi + ] +) + +USING_QT_MT="" + +dnl ------------------------------------------------------------------------ +dnl If we not get --disable-qt-mt then adjust some vars for the host. +dnl ------------------------------------------------------------------------ + +KDE_MT_LDFLAGS= +KDE_MT_LIBS= +if test "x$kde_use_qt_mt" = "xyes"; then + KDE_CHECK_THREADING + if test "x$kde_use_threading" = "xyes"; then + CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" + KDE_MT_LDFLAGS="$USE_THREADS" + KDE_MT_LIBS="$LIBPTHREAD" + else + kde_use_qt_mt=no + fi +fi +AC_SUBST(KDE_MT_LDFLAGS) +AC_SUBST(KDE_MT_LIBS) + +kde_qt_was_given=yes + +dnl ------------------------------------------------------------------------ +dnl If we haven't been told how to link to Qt, we work it out for ourselves. +dnl ------------------------------------------------------------------------ +if test -z "$LIBQT_GLOB"; then + if test "x$kde_use_qt_emb" = "xyes"; then + LIBQT_GLOB="libqte.*" + else + LIBQT_GLOB="libqt.*" + fi +fi + +dnl ------------------------------------------------------------ +dnl If we got --enable-embedded then adjust the Qt library name. +dnl ------------------------------------------------------------ +if test "x$kde_use_qt_emb" = "xyes"; then + qtlib="qte" +else + qtlib="qt" +fi + +kde_int_qt="-l$qtlib" + +if test -z "$LIBQPE"; then +dnl ------------------------------------------------------------ +dnl If we got --enable-palmtop then add -lqpe to the link line +dnl ------------------------------------------------------------ + if test "x$kde_use_qt_emb" = "xyes"; then + if test "x$kde_use_qt_emb_palm" = "xyes"; then + LIB_QPE="-lqpe" + else + LIB_QPE="" + fi + else + LIB_QPE="" + fi +fi + +dnl ------------------------------------------------------------------------ +dnl If we got --enable-qt-mt then adjust the Qt library name for the host. +dnl ------------------------------------------------------------------------ + +if test "x$kde_use_qt_mt" = "xyes"; then + LIBQT="-l$qtlib-mt" + kde_int_qt="-l$qtlib-mt" + LIBQT_GLOB="lib$qtlib-mt.*" + USING_QT_MT="using -mt" +else + LIBQT="-l$qtlib" +fi + +if test $kde_qtver != 1; then + + AC_REQUIRE([AC_FIND_PNG]) + AC_REQUIRE([AC_FIND_JPEG]) + LIBQT="$LIBQT $LIBPNG $LIBJPEG" +fi + +if test $kde_qtver = 3; then + AC_REQUIRE([KDE_CHECK_LIBDL]) + LIBQT="$LIBQT $LIBDL" +fi + +AC_MSG_CHECKING([for Qt]) + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" +fi +ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO +qt_libraries="" +qt_includes="" +AC_ARG_WITH(qt-dir, + AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), + [ ac_qt_includes="$withval"/include + ac_qt_libraries="$withval"/lib${kdelibsuff} + ac_qt_bindir="$withval"/bin + ]) + +AC_ARG_WITH(qt-includes, + AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), + [ + ac_qt_includes="$withval" + ]) + +kde_qt_libs_given=no + +AC_ARG_WITH(qt-libraries, + AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), + [ ac_qt_libraries="$withval" + kde_qt_libs_given=yes + ]) + +AC_CACHE_VAL(ac_cv_have_qt, +[#try to guess Qt locations + +qt_incdirs="" +for dir in $kde_qt_dirs; do + qt_incdirs="$qt_incdirs $dir/include $dir" +done +qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" +if test ! "$ac_qt_includes" = "NO"; then + qt_incdirs="$ac_qt_includes $qt_incdirs" +fi + +if test "$kde_qtver" != "1"; then + kde_qt_header=qstyle.h +else + kde_qt_header=qglobal.h +fi + +AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) +ac_qt_includes="$qt_incdir" + +qt_libdirs="" +for dir in $kde_qt_dirs; do + qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir" +done +qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" +if test ! "$ac_qt_libraries" = "NO"; then + qt_libdir=$ac_qt_libraries +else + qt_libdirs="$ac_qt_libraries $qt_libdirs" + # if the Qt was given, the chance is too big that libqt.* doesn't exist + qt_libdir=NONE + for dir in $qt_libdirs; do + try="ls -1 $dir/${LIBQT_GLOB}" + if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done +fi +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIBQT="$LIBQT ${kde_int_qt}_incremental" + break + fi +done + +ac_qt_libraries="$qt_libdir" + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + +ac_cxxflags_safe="$CXXFLAGS" +ac_ldflags_safe="$LDFLAGS" +ac_libs_safe="$LIBS" + +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" +LIBS="$LIBS $LIBQT $KDE_MT_LIBS" + +KDE_PRINT_QT_PROGRAM + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC + ac_qt_libraries="NO" +fi +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +AC_LANG_RESTORE +if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then + ac_cv_have_qt="have_qt=no" + ac_qt_notfound="" + missing_qt_mt="" + if test "$ac_qt_includes" = NO; then + if test "$ac_qt_libraries" = NO; then + ac_qt_notfound="(headers and libraries)"; + else + ac_qt_notfound="(headers)"; + fi + else + if test "x$kde_use_qt_mt" = "xyes"; then + missing_qt_mt=" +Make sure that you have compiled Qt with thread support!" + ac_qt_notfound="(library $qtlib-mt)"; + else + ac_qt_notfound="(library $qtlib)"; + fi + fi + + AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! +For more details about this problem, look at the end of config.log.$missing_qt_mt]) +else + have_qt="yes" +fi +]) + +eval "$ac_cv_have_qt" + +if test "$have_qt" != yes; then + AC_MSG_RESULT([$have_qt]); +else + ac_cv_have_qt="have_qt=yes \ + ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" + AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) + + qt_libraries="$ac_qt_libraries" + qt_includes="$ac_qt_includes" +fi + +if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then + KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) +fi + +AC_SUBST(qt_libraries) +AC_SUBST(qt_includes) + +if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then + QT_INCLUDES="" +else + QT_INCLUDES="-I$qt_includes" + all_includes="$QT_INCLUDES $all_includes" +fi + +if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then + QT_LDFLAGS="" +else + QT_LDFLAGS="-L$qt_libraries" + all_libraries="$QT_LDFLAGS $all_libraries" +fi +test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" + +AC_SUBST(QT_INCLUDES) +AC_SUBST(QT_LDFLAGS) +AC_PATH_QT_MOC_UIC + +KDE_CHECK_QT_JPEG + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' +else +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' +fi +test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIB_QT="$LIB_QT ${kde_int_qt}_incremental" + break + fi +done + +AC_SUBST(LIB_QT) +AC_SUBST(LIB_QPE) + +AC_SUBST(kde_qtver) +]) + +AC_DEFUN([AC_PATH_QT], +[ +AC_PATH_QT_1_3 +]) + +AC_DEFUN([KDE_CHECK_UIC_PLUGINS], +[ +AC_REQUIRE([AC_PATH_QT_MOC_UIC]) + +if test x$ac_uic_supports_libpath = xyes; then + +AC_MSG_CHECKING([if UIC has KDE plugins available]) +AC_CACHE_VAL(kde_cv_uic_plugins, +[ +cat > actest.ui << EOF +<!DOCTYPE UI><UI version="3.0" stdsetdef="1"> +<class>NewConnectionDialog</class> +<widget class="QDialog"> + <widget class="KLineEdit"> + <property name="name"> + <cstring>testInput</cstring> + </property> + </widget> +</widget> +</UI> +EOF + + + +kde_cv_uic_plugins=no +kde_line="$UIC_PATH -L $kde_widgetdir" +if test x$ac_uic_supports_nounload = xyes; then + kde_line="$kde_line -nounload" +fi +kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" +if AC_TRY_EVAL(kde_line); then + # if you're trying to debug this check and think it's incorrect, + # better check your installation. The check _is_ correct - your + # installation is not. + if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then + kde_cv_uic_plugins=yes + fi +fi +rm -f actest.ui actest.cpp +]) + +AC_MSG_RESULT([$kde_cv_uic_plugins]) +if test "$kde_cv_uic_plugins" != yes; then + AC_MSG_ERROR([ +you need to install kdelibs first. + +If you did install kdelibs, then the Qt version that is picked up by +this configure is not the same version you used to compile kdelibs. +The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the +_same Qt version_, compiled with the _same compiler_ and the same Qt +configuration settings. +]) +fi +fi +]) + +AC_DEFUN([KDE_CHECK_FINAL], +[ + AC_ARG_ENABLE(final, + AC_HELP_STRING([--enable-final], + [build size optimized apps (experimental - needs lots of memory)]), + kde_use_final=$enableval, kde_use_final=no) + + if test "x$kde_use_final" = "xyes"; then + KDE_USE_FINAL_TRUE="" + KDE_USE_FINAL_FALSE="#" + else + KDE_USE_FINAL_TRUE="#" + KDE_USE_FINAL_FALSE="" + fi + AC_SUBST(KDE_USE_FINAL_TRUE) + AC_SUBST(KDE_USE_FINAL_FALSE) +]) + +AC_DEFUN([KDE_CHECK_CLOSURE], +[ + AC_ARG_ENABLE(closure, + AC_HELP_STRING([--enable-closure],[delay template instantiation]), + kde_use_closure=$enableval, kde_use_closure=no) + + KDE_NO_UNDEFINED="" + if test "x$kde_use_closure" = "xyes"; then + KDE_USE_CLOSURE_TRUE="" + KDE_USE_CLOSURE_FALSE="#" +# CXXFLAGS="$CXXFLAGS $REPO" + else + KDE_USE_CLOSURE_TRUE="#" + KDE_USE_CLOSURE_FALSE="" + KDE_NO_UNDEFINED="" + case $host in + *-*-linux-gnu) + KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], + [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], + [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], + [KDE_NO_UNDEFINED=""])], + [KDE_NO_UNDEFINED=""]) + ;; + esac + fi + AC_SUBST(KDE_USE_CLOSURE_TRUE) + AC_SUBST(KDE_USE_CLOSURE_FALSE) + AC_SUBST(KDE_NO_UNDEFINED) +]) + +dnl Check if the linker supports --enable-new-dtags and --as-needed +AC_DEFUN([KDE_CHECK_NEW_LDFLAGS], +[ + AC_ARG_ENABLE(new_ldflags, + AC_HELP_STRING([--enable-new-ldflags], + [enable the new linker flags]), + kde_use_new_ldflags=$enableval, + kde_use_new_ldflags=no) + + LDFLAGS_AS_NEEDED="" + LDFLAGS_NEW_DTAGS="" + if test "x$kde_use_new_ldflags" = "xyes"; then + LDFLAGS_NEW_DTAGS="" + KDE_CHECK_COMPILER_FLAG([Wl,--enable-new-dtags], + [LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"],) + + KDE_CHECK_COMPILER_FLAG([Wl,--as-needed], + [LDFLAGS_AS_NEEDED="-Wl,--as-needed"],) + fi + AC_SUBST(LDFLAGS_AS_NEEDED) + AC_SUBST(LDFLAGS_NEW_DTAGS) +]) + +AC_DEFUN([KDE_CHECK_NMCHECK], +[ + AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), + kde_use_nmcheck=$enableval, kde_use_nmcheck=no) + + if test "$kde_use_nmcheck" = "yes"; then + KDE_USE_NMCHECK_TRUE="" + KDE_USE_NMCHECK_FALSE="#" + else + KDE_USE_NMCHECK_TRUE="#" + KDE_USE_NMCHECK_FALSE="" + fi + AC_SUBST(KDE_USE_NMCHECK_TRUE) + AC_SUBST(KDE_USE_NMCHECK_FALSE) +]) + +AC_DEFUN([KDE_EXPAND_MAKEVAR], [ +savex=$exec_prefix +test "x$exec_prefix" = xNONE && exec_prefix=$prefix +tmp=$$2 +while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done +exec_prefix=$savex +]) + +dnl ------------------------------------------------------------------------ +dnl Now, the same with KDE +dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) +dnl and $(kde_includes) will be the kdehdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_BASE_PATH_KDE], +[ +AC_REQUIRE([KDE_CHECK_STL]) +AC_REQUIRE([AC_PATH_QT])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_CHECK_RPATH +AC_MSG_CHECKING([for KDE]) + +if test "${prefix}" != NONE; then + kde_includes=${includedir} + KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) + + kde_libraries=${libdir} + KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) + +else + ac_kde_includes= + ac_kde_libraries= + kde_libraries="" + kde_includes="" +fi + +AC_CACHE_VAL(ac_cv_have_kde, +[#try to guess kde locations + +if test "$kde_qtver" = 1; then + kde_check_header="ksock.h" + kde_check_lib="libkdecore.la" +else + kde_check_header="ksharedptr.h" + kde_check_lib="libkio.la" +fi + +if test -z "$1"; then + +kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" +test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" +kde_incdirs="$ac_kde_includes $kde_incdirs" +AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) +ac_kde_includes="$kde_incdir" + +if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then + AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE headers installed. This will fail. +So, check this please and use another prefix!]) +fi + +kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}" +test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs" +kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" +AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) +ac_kde_libraries="$kde_libdir" + +kde_widgetdir=NO +dnl this might be somewhere else +AC_FIND_FILE("kde3/plugins/designer/kdewidgets.la", $kde_libdirs, kde_widgetdir) + +if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then +AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE libraries installed. This will fail. +So, check this please and use another prefix!]) +fi + +if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then +AC_MSG_ERROR([ +I can't find the designer plugins. These are required and should have been installed +by kdelibs]) +fi + +if test -n "$kde_widgetdir"; then + kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" +fi + + +if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then + ac_cv_have_kde="have_kde=no" +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" +fi + +else dnl test -z $1, e.g. from kdelibs + + ac_cv_have_kde="have_kde=no" + +fi +])dnl + +eval "$ac_cv_have_kde" + +if test "$have_kde" != "yes"; then + if test "${prefix}" = NONE; then + ac_kde_prefix="$ac_default_prefix" + else + ac_kde_prefix="$prefix" + fi + if test "$exec_prefix" = NONE; then + ac_kde_exec_prefix="$ac_kde_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix]) + else + ac_kde_exec_prefix="$exec_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) + fi + + kde_libraries="${libdir}" + kde_includes="${includedir}" + +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" + AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) + + kde_libraries="$ac_kde_libraries" + kde_includes="$ac_kde_includes" +fi +AC_SUBST(kde_libraries) +AC_SUBST(kde_includes) + +if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then + KDE_INCLUDES="" +else + KDE_INCLUDES="-I$kde_includes" + all_includes="$KDE_INCLUDES $all_includes" +fi + +KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" + +KDE_LDFLAGS="-L$kde_libraries" +if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then + all_libraries="$KDE_LDFLAGS $all_libraries" +fi + +AC_SUBST(KDE_LDFLAGS) +AC_SUBST(KDE_INCLUDES) + +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +all_libraries="$all_libraries $USER_LDFLAGS" +all_includes="$all_includes $USER_INCLUDES" +AC_SUBST(all_includes) +AC_SUBST(all_libraries) + +if test -z "$1"; then +KDE_CHECK_UIC_PLUGINS +fi + +ac_kde_libraries="$kde_libdir" + +AC_SUBST(AUTODIRS) + + +]) + +AC_DEFUN([KDE_CHECK_EXTRA_LIBS], +[ +AC_MSG_CHECKING(for extra includes) +AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), + kde_use_extra_includes="$withval", + kde_use_extra_includes=NONE +) +kde_extra_includes= +if test -n "$kde_use_extra_includes" && \ + test "$kde_use_extra_includes" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_includes; do + kde_extra_includes="$kde_extra_includes $dir" + USER_INCLUDES="$USER_INCLUDES -I$dir" + done + IFS=$ac_save_ifs + kde_use_extra_includes="added" +else + kde_use_extra_includes="no" +fi +AC_SUBST(USER_INCLUDES) + +AC_MSG_RESULT($kde_use_extra_includes) + +kde_extra_libs= +AC_MSG_CHECKING(for extra libs) +AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), + kde_use_extra_libs=$withval, + kde_use_extra_libs=NONE +) +if test -n "$kde_use_extra_libs" && \ + test "$kde_use_extra_libs" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_libs; do + kde_extra_libs="$kde_extra_libs $dir" + KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" + USER_LDFLAGS="$USER_LDFLAGS -L$dir" + done + IFS=$ac_save_ifs + kde_use_extra_libs="added" +else + kde_use_extra_libs="no" +fi + +AC_SUBST(USER_LDFLAGS) + +AC_MSG_RESULT($kde_use_extra_libs) + +]) + +AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], +[ + AC_MSG_CHECKING([for KDE headers installed]) + AC_LANG_SAVE + AC_LANG_CPLUSPLUS +cat > conftest.$ac_ext <<EOF +#ifdef STDC_HEADERS +# include <stdlib.h> +#endif +#include <stdio.h> +#include "confdefs.h" +#include <kapp.h> + +int main() { + printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); + printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); + printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); + printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); + printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); + printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); + printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); + printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); + printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); + printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); + printf("kde_wallpaperdir=\\"%s\\"\n", + KApplication::kde_wallpaperdir().data()); + printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); + printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); + printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); + printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); + printf("kde_moduledir=\\"/tmp/dummy\\"\n"); + printf("kde_styledir=\\"/tmp/dummy\\"\n"); + printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); + printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); + printf("xdg_menudir=\\"/tmp/dummy\\"\n"); + printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); + printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); + return 0; + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$all_includes $CPPFLAGS" + if AC_TRY_EVAL(ac_compile); then + AC_MSG_RESULT(yes) + else + AC_MSG_ERROR([your system is not able to compile a small KDE application! +Check, if you installed the KDE header files correctly. +For more details about this problem, look at the end of config.log.]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_CHECK_KDEQTADDON], +[ +AC_MSG_CHECKING(for kde-qt-addon) +AC_CACHE_VAL(kde_cv_have_kdeqtaddon, +[ + kde_ldflags_safe="$LDFLAGS" + kde_libs_safe="$LIBS" + kde_cxxflags_safe="$CXXFLAGS" + + LIBS="-lkde-qt-addon $LIBQT $LIBS" + CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" + LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" + + AC_TRY_LINK([ + #include <qdom.h> + ], + [ + QDomDocument doc; + ], + kde_cv_have_kdeqtaddon=yes, + kde_cv_have_kdeqtaddon=no + ) + + LDFLAGS=$kde_ldflags_safe + LIBS=$kde_libs_safe + CXXFLAGS=$kde_cxxflags_safe +]) + +AC_MSG_RESULT($kde_cv_have_kdeqtaddon) + +if test "$kde_cv_have_kdeqtaddon" = "no"; then + AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. +It is a separate package (and CVS module) named kde-qt-addon.]) +fi +]) + +AC_DEFUN([KDE_CREATE_LIBS_ALIASES], +[ + AC_REQUIRE([KDE_MISC_TESTS]) + AC_REQUIRE([KDE_CHECK_LIBDL]) + AC_REQUIRE([K_PATH_X]) + +if test $kde_qtver = 3; then + case $host in + *cygwin*) lib_kded="-lkdeinit_kded" ;; + *) lib_kded="" ;; + esac + AC_SUBST(LIB_KDED, $lib_kded) + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KJS, "-lkjs") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KABC, "-lkabc") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") + AC_SUBST(LIB_KUTILS, "-lkutils") + AC_SUBST(LIB_KDEPIM, "-lkdepim") + AC_SUBST(LIB_KIMPROXY, "-lkimproxy") + AC_SUBST(LIB_KNEWSTUFF, "-lknewstuff") + AC_SUBST(LIB_KDNSSD, "-lkdnssd") + AC_SUBST(LIB_KUNITTEST, "-lkunittest") +# these are for backward compatibility + AC_SUBST(LIB_KSYCOCA, "-lkio") + AC_SUBST(LIB_KFILE, "-lkio") +elif test $kde_qtver = 2; then + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KSYCOCA, "-lksycoca") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KFILE, "-lkfile") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") +else + AC_SUBST(LIB_KDECORE, "-lkdecore -lXext $(LIB_QT)") + AC_SUBST(LIB_KDEUI, "-lkdeui $(LIB_KDECORE)") + AC_SUBST(LIB_KFM, "-lkfm $(LIB_KDECORE)") + AC_SUBST(LIB_KFILE, "-lkfile $(LIB_KFM) $(LIB_KDEUI)") + AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_KDECORE)") +fi +]) + +AC_DEFUN([AC_PATH_KDE], +[ + AC_BASE_PATH_KDE + AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), + [ + if test "$enableval" = "no"; + then ac_use_path_checking="default" + else ac_use_path_checking="" + fi + ], + [ + if test "$kde_qtver" = 1; + then ac_use_path_checking="" + else ac_use_path_checking="default" + fi + ] + ) + + AC_CREATE_KFSSTND($ac_use_path_checking) + + AC_SUBST_KFSSTND + KDE_CREATE_LIBS_ALIASES +]) + +dnl KDE_CHECK_FUNC_EXT(<func>, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) +AC_DEFUN([KDE_CHECK_FUNC_EXT], +[ +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(kde_cv_func_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +save_CXXFLAGS="$CXXFLAGS" +kde_safe_LIBS="$LIBS" +LIBS="$LIBS $X_EXTRA_LIBS" +if test "$GXX" = "yes"; then +CXXFLAGS="$CXXFLAGS -pedantic-errors" +fi +AC_TRY_COMPILE([ +$2 +], +[ +$3 +], +kde_cv_func_$1=yes, +kde_cv_func_$1=no) +CXXFLAGS="$save_CXXFLAGS" +LIBS="$kde_safe_LIBS" +AC_LANG_RESTORE +]) + +AC_MSG_RESULT($kde_cv_func_$1) + +AC_MSG_CHECKING([if $1 needs custom prototype]) +AC_CACHE_VAL(kde_cv_proto_$1, +[ +if test "x$kde_cv_func_$1" = xyes; then + kde_cv_proto_$1=no +else + case "$1" in + setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) + kde_cv_proto_$1="yes - in libkdefakes" + ;; + *) + kde_cv_proto_$1=unknown + ;; + esac +fi + +if test "x$kde_cv_proto_$1" = xunknown; then + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + kde_safe_libs=$LIBS + LIBS="$LIBS $X_EXTRA_LIBS" + AC_TRY_LINK([ +$2 + +extern "C" $4; +], +[ +$3 +], +[ kde_cv_func_$1=yes + kde_cv_proto_$1=yes ], + [kde_cv_proto_$1="$1 unavailable"] +) +LIBS=$kde_safe_libs +AC_LANG_RESTORE +fi +]) +AC_MSG_RESULT($kde_cv_proto_$1) + +if test "x$kde_cv_func_$1" = xyes; then + AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) + $6 +fi +if test "x$kde_cv_proto_$1" = xno; then + AC_DEFINE(HAVE_$5_PROTO, 1, + [Define if you have the $1 prototype]) +fi + +AH_VERBATIM([_HAVE_$5_PROTO], +[ +#if !defined(HAVE_$5_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +$4; +#ifdef __cplusplus +} +#endif +#endif +]) +]) + +AC_DEFUN([AC_CHECK_SETENV], +[ + KDE_CHECK_FUNC_EXT(setenv, [ +#include <stdlib.h> +], + [setenv("VAR", "VALUE", 1);], + [int setenv (const char *, const char *, int)], + [SETENV]) +]) + +AC_DEFUN([AC_CHECK_UNSETENV], +[ + KDE_CHECK_FUNC_EXT(unsetenv, [ +#include <stdlib.h> +], + [unsetenv("VAR");], + [void unsetenv (const char *)], + [UNSETENV]) +]) + +AC_DEFUN([AC_CHECK_GETDOMAINNAME], +[ + KDE_CHECK_FUNC_EXT(getdomainname, [ +#include <stdlib.h> +#include <unistd.h> +#include <netdb.h> +], + [ +char buffer[200]; +getdomainname(buffer, 200); +], + [#include <sys/types.h> + int getdomainname (char *, size_t)], + [GETDOMAINNAME]) +]) + +AC_DEFUN([AC_CHECK_GETHOSTNAME], +[ + KDE_CHECK_FUNC_EXT(gethostname, [ +#include <stdlib.h> +#include <unistd.h> +], + [ +char buffer[200]; +gethostname(buffer, 200); +], + [int gethostname (char *, unsigned int)], + [GETHOSTNAME]) +]) + +AC_DEFUN([AC_CHECK_USLEEP], +[ + KDE_CHECK_FUNC_EXT(usleep, [ +#include <unistd.h> +], + [ +usleep(200); +], + [int usleep (unsigned int)], + [USLEEP]) +]) + + +AC_DEFUN([AC_CHECK_RANDOM], +[ + KDE_CHECK_FUNC_EXT(random, [ +#include <stdlib.h> +], + [ +random(); +], + [long int random(void)], + [RANDOM]) + + KDE_CHECK_FUNC_EXT(srandom, [ +#include <stdlib.h> +], + [ +srandom(27); +], + [void srandom(unsigned int)], + [SRANDOM]) + +]) + +AC_DEFUN([AC_CHECK_INITGROUPS], +[ + KDE_CHECK_FUNC_EXT(initgroups, [ +#include <sys/types.h> +#include <unistd.h> +#include <grp.h> +], + [ +char buffer[200]; +initgroups(buffer, 27); +], + [int initgroups(const char *, gid_t)], + [INITGROUPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMPS], +[ + KDE_CHECK_FUNC_EXT(mkstemps, [ +#include <stdlib.h> +#include <unistd.h> +], + [ +mkstemps("/tmp/aaaXXXXXX", 6); +], + [int mkstemps(char *, int)], + [MKSTEMPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMP], +[ + KDE_CHECK_FUNC_EXT(mkstemp, [ +#include <stdlib.h> +#include <unistd.h> +], + [ +mkstemp("/tmp/aaaXXXXXX"); +], + [int mkstemp(char *)], + [MKSTEMP]) +]) + +AC_DEFUN([AC_CHECK_MKDTEMP], +[ + KDE_CHECK_FUNC_EXT(mkdtemp, [ +#include <stdlib.h> +#include <unistd.h> +], + [ +mkdtemp("/tmp/aaaXXXXXX"); +], + [char *mkdtemp(char *)], + [MKDTEMP]) +]) + + +AC_DEFUN([AC_CHECK_RES_INIT], +[ + AC_MSG_CHECKING([if res_init needs -lresolv]) + kde_libs_safe="$LIBS" + LIBS="$LIBS $X_EXTRA_LIBS -lresolv" + AC_TRY_LINK( + [ +#include <sys/types.h> +#include <netinet/in.h> +#include <arpa/nameser.h> +#include <resolv.h> + ], + [ + res_init(); + ], + [ + LIBRESOLV="-lresolv" + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) + ], + [ AC_MSG_RESULT(no) ] + ) + LIBS=$kde_libs_safe + AC_SUBST(LIBRESOLV) + + KDE_CHECK_FUNC_EXT(res_init, + [ +#include <sys/types.h> +#include <netinet/in.h> +#include <arpa/nameser.h> +#include <resolv.h> + ], + [res_init()], + [int res_init(void)], + [RES_INIT]) +]) + +AC_DEFUN([AC_CHECK_STRLCPY], +[ + KDE_CHECK_FUNC_EXT(strlcpy, [ +#include <string.h> +], +[ char buf[20]; + strlcpy(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcpy(char*, const char*, unsigned long)], + [STRLCPY]) +]) + +AC_DEFUN([AC_CHECK_STRLCAT], +[ + KDE_CHECK_FUNC_EXT(strlcat, [ +#include <string.h> +], +[ char buf[20]; + buf[0]='\0'; + strlcat(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcat(char*, const char*, unsigned long)], + [STRLCAT]) +]) + +AC_DEFUN([AC_CHECK_RES_QUERY], +[ + KDE_CHECK_FUNC_EXT(res_query, [ +#include <sys/types.h> +#include <netinet/in.h> +#include <arpa/nameser.h> +#include <resolv.h> +#include <netdb.h> +], +[ +res_query(NULL, 0, 0, NULL, 0); +], + [int res_query(const char *, int, int, unsigned char *, int)], + [RES_QUERY]) +]) + +AC_DEFUN([AC_CHECK_DN_SKIPNAME], +[ + KDE_CHECK_FUNC_EXT(dn_skipname, [ +#include <sys/types.h> +#include <netinet/in.h> +#include <arpa/nameser.h> +#include <resolv.h> +], +[ +dn_skipname (NULL, NULL); +], + [int dn_skipname (unsigned char *, unsigned char *)], + [DN_SKIPNAME]) +]) + + +AC_DEFUN([AC_FIND_GIF], + [AC_MSG_CHECKING([for giflib]) +AC_CACHE_VAL(ac_cv_lib_gif, +[ac_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" +else +LIBS="$all_libraries -lgif" +fi +AC_TRY_LINK(dnl +[ +#ifdef __cplusplus +extern "C" { +#endif +int GifLastError(void); +#ifdef __cplusplus +} +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +], + [return GifLastError();], + eval "ac_cv_lib_gif=yes", + eval "ac_cv_lib_gif=no") +LIBS="$ac_save_LIBS" +])dnl +if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) +else + AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) +fi +]) + +AC_DEFUN([KDE_FIND_JPEG_HELPER], +[ +AC_MSG_CHECKING([for libjpeg$2]) +AC_CACHE_VAL(ac_cv_lib_jpeg_$1, +[ +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" +ac_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[ +#ifdef __cplusplus +extern "C" { +#endif +void jpeg_CreateDecompress(); +#ifdef __cplusplus +} +#endif +], +[jpeg_CreateDecompress();], + eval "ac_cv_lib_jpeg_$1=-ljpeg$2", + eval "ac_cv_lib_jpeg_$1=no") +LIBS="$ac_save_LIBS" +CFLAGS="$ac_save_CFLAGS" +]) + +if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then + LIBJPEG="$ac_cv_lib_jpeg_$1" + AC_MSG_RESULT($ac_cv_lib_jpeg_$1) +else + AC_MSG_RESULT(no) + $3 +fi + +]) + +AC_DEFUN([AC_FIND_JPEG], +[ +dnl first look for libraries +KDE_FIND_JPEG_HELPER(6b, 6b, + KDE_FIND_JPEG_HELPER(normal, [], + [ + LIBJPEG= + ] + ) +) + +dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h +dnl requires system dependent includes loaded before it) +jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" +AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) +test "x$jpeg_incdir" = xNO && jpeg_incdir= + +dnl if headers _and_ libraries are missing, this is no error, and we +dnl continue with a warning (the user will get no jpeg support in khtml) +dnl if only one is missing, it means a configuration error, but we still +dnl only warn +if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then + AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) +else + if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then + AC_MSG_WARN([ +There is an installation error in jpeg support. You seem to have only one +of either the headers _or_ the libraries installed. You may need to either +provide correct --with-extra-... options, or the development package of +libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ +Disabling JPEG support. +]) + else + AC_MSG_WARN([libjpeg not found. disable JPEG support.]) + fi + jpeg_incdir= + LIBJPEG= +fi + +AC_SUBST(LIBJPEG) +AH_VERBATIM(_AC_CHECK_JPEG, +[/* + * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system + * headers and I'm too lazy to write a configure test as long as only + * unixware is related + */ +#ifdef _UNIXWARE +#define HAVE_BOOLEAN +#endif +]) +]) + +AC_DEFUN([KDE_CHECK_QT_JPEG], +[ +if test -n "$LIBJPEG"; then +AC_MSG_CHECKING([if Qt needs $LIBJPEG]) +AC_CACHE_VAL(kde_cv_qt_jpeg, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS $LIBQT" +LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` +ac_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[#include <qapplication.h>], + [ + int argc; + char** argv; + QApplication app(argc, argv);], + eval "kde_cv_qt_jpeg=no", + eval "kde_cv_qt_jpeg=yes") +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +fi +]) + +if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then + AC_MSG_RESULT(yes) + LIBJPEG_QT='$(LIBJPEG)' +else + AC_MSG_RESULT(no) + LIBJPEG_QT= +fi + +]) + +AC_DEFUN([AC_FIND_ZLIB], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for libz]) +AC_CACHE_VAL(ac_cv_lib_z, +[ +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#include<zlib.h> +], +[ + char buf[42]; + gzFile f = (gzFile) 0; + /* this would segfault.. but we only link, don't run */ + (void) gzgets(f, buf, sizeof(buf)); + + return (zlibVersion() == ZLIB_VERSION); +], + eval "ac_cv_lib_z='-lz'", + eval "ac_cv_lib_z=no") +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if test ! "$ac_cv_lib_z" = no; then + AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) + LIBZ="$ac_cv_lib_z" + AC_MSG_RESULT($ac_cv_lib_z) +else + AC_MSG_ERROR(not found. + Possibly configure picks up an outdated version + installed by XFree86. Remove it from your system. + + Check your installation and look into config.log) + LIBZ="" +fi +AC_SUBST(LIBZ) +]) + +AC_DEFUN([KDE_TRY_TIFFLIB], +[ +AC_MSG_CHECKING([for libtiff $1]) + +AC_CACHE_VAL(kde_cv_libtiff_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" +else +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" +fi +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl +[ +#include<tiffio.h> +], + [return (TIFFOpen( "", "r") == 0); ], +[ + kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" +], [ + kde_cv_libtiff_$1=no +]) + +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +]) + +if test "$kde_cv_libtiff_$1" = "no"; then + AC_MSG_RESULT(no) + LIBTIFF="" + $3 +else + LIBTIFF="$kde_cv_libtiff_$1" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) + $2 +fi + +]) + +AC_DEFUN([AC_FIND_TIFF], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +KDE_TRY_TIFFLIB(tiff, [], + KDE_TRY_TIFFLIB(tiff34)) + +AC_SUBST(LIBTIFF) +]) + +AC_DEFUN([KDE_FIND_LIBEXR], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_CACHE_VAL(ac_cv_libexr, +[ + if test -z "$PKG_CONFIG"; then + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + fi + + AC_MSG_CHECKING([for OpenEXR libraries]) + + if test "$PKG_CONFIG" = "no" ; then + AC_MSG_RESULT(no) + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + if !(`$PKG_CONFIG --exists OpenEXR`) ; then + AC_MSG_RESULT(no) + EXRSTATUS=no + else + if !(`$PKG_CONFIG --atleast-version="1.1.1" OpenEXR`) ; then + AC_MSG_RESULT(no) + EXRSTATUS=old + else + kde_save_LIBS="$LIBS" + LIBS="$LIBS $all_libraries $USER_LDFLAGS `pkg-config --libs OpenEXR` $LIBZ" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_CXXFLAGS="$CXXFLAGS" + EXR_FLAGS=`$PKG_CONFIG --cflags OpenEXR` + CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES $EXR_FLAGS" + + AC_TRY_LINK(dnl + [ + #include <ImfRgbaFile.h> + ], + [ + using namespace Imf; + RgbaInputFile file ("dummy"); + return 0; + ], + eval "ac_cv_libexr='`pkg-config --libs OpenEXR`'", + eval "ac_cv_libexr=no" + ) + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + if eval "test ! \"`echo $ac_cv_libexr`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_EXR, 1, [Define if you have OpenEXR]) + LIB_EXR="$ac_cv_libexr" + AC_MSG_RESULT($ac_cv_libexr) + else + AC_MSG_RESULT(no) + LIB_EXR="" + fi + fi + fi + fi + AC_SUBST(LIB_EXR) + AC_SUBST(EXR_FLAGS) +]) + + + +AC_DEFUN([AC_FIND_PNG], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_MSG_CHECKING([for libpng]) +AC_CACHE_VAL(ac_cv_lib_png, +[ +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" +else +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" +fi +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include<png.h> + ], + [ + png_structp png_ptr = png_create_read_struct( /* image ptr */ + PNG_LIBPNG_VER_STRING, 0, 0, 0 ); + return( png_ptr != 0 ); + ], + eval "ac_cv_lib_png='-lpng $LIBZ -lm'", + eval "ac_cv_lib_png=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) + LIBPNG="$ac_cv_lib_png" + AC_SUBST(LIBPNG) + AC_MSG_RESULT($ac_cv_lib_png) +else + AC_MSG_RESULT(no) + LIBPNG="" + AC_SUBST(LIBPNG) +fi +]) + + +AC_DEFUN([AC_FIND_JASPER], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_MSG_CHECKING([for jasper]) +AC_CACHE_VAL(ac_cv_jasper, +[ +kde_save_LIBS="$LIBS" +LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include<jasper/jasper.h> + ], + [ + return( jas_init() ); + ], + eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", + eval "ac_cv_jasper=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) + LIB_JASPER="$ac_cv_jasper" + AC_MSG_RESULT($ac_cv_jasper) +else + AC_MSG_RESULT(no) + LIB_JASPER="" +fi +AC_SUBST(LIB_JASPER) +]) + +AC_DEFUN([AC_CHECK_BOOL], +[ + AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) +]) + +AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], +[ +AC_MSG_CHECKING(if you need GNU extensions) +AC_CACHE_VAL(ac_cv_gnu_extensions, +[ +cat > conftest.c << EOF +#include <features.h> + +#ifdef __GNU_LIBRARY__ +yes +#endif +EOF + +if (eval "$ac_cpp conftest.c") 2>&5 | + egrep "yes" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_gnu_extensions=yes +else + ac_cv_gnu_extensions=no +fi +]) + +AC_MSG_RESULT($ac_cv_gnu_extensions) +if test "$ac_cv_gnu_extensions" = "yes"; then + AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) +fi +]) + +AC_DEFUN([KDE_CHECK_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CXX supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) + CXXFLAGS="$save_CXXFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + +AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CC supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_C + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) + CFLAGS="$save_CFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + + +dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables +dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) +dnl it's all white-space separated +AC_DEFUN([AC_REMOVE_FORBIDDEN], +[ __val=$$1 + __forbid=" $2 " + if test -n "$__val"; then + __new="" + ac_save_IFS=$IFS + IFS=" " + for i in $__val; do + case "$__forbid" in + *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; + *) # Careful to not add spaces, where there were none, because otherwise + # libtool gets confused, if we change e.g. CXX + if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; + esac + done + IFS=$ac_save_IFS + $1=$__new + fi +]) + + +AC_DEFUN([KDE_CHECK_FOR_BAD_COMPILER], +[ + AC_MSG_CHECKING([whether $CC is blacklisted]) + + dnl In theory we have tu run this test against $CC and $CXX + dnl in C and in C++ mode, because its perfectly legal for + dnl the user to mix compiler versions, since C has a defined + dnl ABI. + dnl + dnl For now, we assume the user is not on crack. + + AC_TRY_COMPILE([ +#ifdef __GNUC__ +#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0 +choke me +#endif +#endif +], , + kde_bad_compiler=no, + kde_bad_compiler=yes +) + + AC_MSG_RESULT($kde_bad_compiler) + +if test "$kde_bad_compiler" = "yes"; then + AC_MSG_ERROR([ + +This particular compiler version is blacklisted because it +is known to miscompile KDE. Please use a newer version, or +if that is not yet available, choose an older version. + +Please do not report a bug or bother us reporting this +configure error. We know about it, and we introduced +it by intention to avoid untraceable bugs or crashes in KDE. + +]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_FOR_OPT_NOINLINE_MATCH], +[ + AC_CACHE_CHECK([whether system headers can cope with -O2 -fno-inline], + kde_cv_opt_noinline_match, + [ + kde_cv_opt_noinline_match=irrelevant + dnl if we don't use both -O2 and -fno-inline, this check is moot + if echo "$CFLAGS" | grep -e -O2 >/dev/null 2>/dev/null \ + && echo "$CFLAGS" | grep -e -fno-inline >/dev/null 2>/dev/null ; then + + ac_cflags_save="$CFLAGS" + CFLAGS="$CFLAGS -D_USE_GNU" + + AC_TRY_LINK([ + #include <string.h> +], [ const char *pt, *et; + et = __extension__ ({ char __a0, __a1, __a2; (__builtin_constant_p ( ";," ) && ((size_t)(const void *)(( ";," )+ 1) - (size_t)(const void *)( ";," ) == 1) ? ((__a0 =((__const char *) ( ";," ))[0], __a0 == '\0') ? ((void) ( pt ),((void *)0) ) : ((__a1 = ((__const char *) ( ";," ))[1], __a1== '\0') ? (__extension__ (__builtin_constant_p ( __a0 ) && ( __a0 ) == '\0' ? (char *) __rawmemchr ( pt , __a0) : strchr( pt , __a0 ))) : ((__a2 = ((__const char *) ( ";," ))[2], __a2 == '\0') ? __strpbrk_c2 ( pt , __a0, __a1) :(((__const char *) ( ";," ))[3] == '\0' ? __strpbrk_c3 ( pt ,__a0, __a1, __a2): strpbrk ( pt , ";," ))))) : strpbrk ( pt , ";," )); }) ; +], + kde_cv_opt_noinline_match=yes, + kde_cv_opt_noinline_match=no + ) + + CFLAGS="$ac_cflags_save" + fi + ]) +]) + + +dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given +AC_DEFUN([AC_VALIDIFY_CXXFLAGS], +[dnl +if test "x$kde_use_qt_emb" != "xyes"; then + AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) +else + AC_REMOVE_FORBIDDEN(CXX, [-rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) +fi +]) + +AC_DEFUN([AC_CHECK_COMPILERS], +[ + AC_ARG_ENABLE(debug, + AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), + [ + case $enableval in + yes) + kde_use_debug_code="yes" + kde_use_debug_define=no + ;; + full) + kde_use_debug_code="full" + kde_use_debug_define=no + ;; + *) + kde_use_debug_code="no" + kde_use_debug_define=yes + ;; + esac + ], + [kde_use_debug_code="no" + kde_use_debug_define=no + ]) + + dnl Just for configure --help + AC_ARG_ENABLE(dummyoption, + AC_HELP_STRING([--disable-debug], + [disables debug output and debug symbols [default=no]]), + [],[]) + + AC_ARG_ENABLE(strict, + AC_HELP_STRING([--enable-strict], + [compiles with strict compiler options (may not work!)]), + [ + if test $enableval = "no"; then + kde_use_strict_options="no" + else + kde_use_strict_options="yes" + fi + ], [kde_use_strict_options="no"]) + + AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similar]), + [ + if test $enableval = "no"; then + kde_use_warnings="no" + else + kde_use_warnings="yes" + fi + ], [kde_use_warnings="yes"]) + + dnl enable warnings for debug build + if test "$kde_use_debug_code" != "no"; then + kde_use_warnings=yes + fi + + AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), + [kde_use_profiling=$enableval], + [kde_use_profiling="no"] + ) + + dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS + CFLAGS=" $CFLAGS" + + AC_PROG_CC + + AC_PROG_CPP + + if test "$GCC" = "yes"; then + if test "$kde_use_debug_code" != "no"; then + if test $kde_use_debug_code = "full"; then + CFLAGS="-g3 -fno-inline $CFLAGS" + else + CFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CFLAGS" + fi + else + CFLAGS="-O2 $CFLAGS" + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CFLAGS="-DNDEBUG $CFLAGS" + fi + + + case "$host" in + *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; + *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; + esac + + if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then + LDFLAGS="" + fi + + CXXFLAGS=" $CXXFLAGS" + + AC_PROG_CXX + + KDE_CHECK_FOR_BAD_COMPILER + + if test "$GXX" = "yes" || test "$CXX" = "KCC"; then + if test "$kde_use_debug_code" != "no"; then + if test "$CXX" = "KCC"; then + CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" + else + if test "$kde_use_debug_code" = "full"; then + CXXFLAGS="-g3 -fno-inline $CXXFLAGS" + else + CXXFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CXXFLAGS" + fi + fi + KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) + + dnl convenience compiler flags + KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) + AC_SUBST(WOVERLOADED_VIRTUAL) + else + if test "$CXX" = "KCC"; then + CXXFLAGS="+K3 $CXXFLAGS" + else + CXXFLAGS="-O2 $CXXFLAGS" + fi + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" + fi + + if test "$kde_use_profiling" = "yes"; then + KDE_CHECK_COMPILER_FLAG(pg, + [ + CFLAGS="-pg $CFLAGS" + CXXFLAGS="-pg $CXXFLAGS" + ]) + fi + + if test "$kde_use_warnings" = "yes"; then + if test "$GCC" = "yes"; then + CXXFLAGS="-Wall -W -Wpointer-arith $CXXFLAGS" + case $host in + *-*-linux-gnu) + CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" + CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS" + KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) + KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) + ;; + esac + KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) + KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) + dnl ### FIXME: revert for KDE 4 + KDE_CHECK_COMPILER_FLAG(Wno-non-virtual-dtor,[CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"]) + fi + fi + + if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then + CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" + fi + + AC_ARG_ENABLE(pch, + AC_HELP_STRING([--enable-pch], + [enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) [default=no]]), + [ kde_use_pch=$enableval ],[ kde_use_pch=no ]) + + HAVE_GCC_VISIBILITY=0 + AC_SUBST([HAVE_GCC_VISIBILITY]) + + if test "$GXX" = "yes"; then + gcc_no_reorder_blocks=NO + KDE_CHECK_COMPILER_FLAG(fno-reorder-blocks,[gcc_no_reorder_blocks=YES]) + if test $kde_use_debug_code != "no" && \ + test $kde_use_debug_code != "full" && \ + test "YES" = "$gcc_no_reorder_blocks" ; then + CXXFLAGS="$CXXFLAGS -fno-reorder-blocks" + CFLAGS="$CFLAGS -fno-reorder-blocks" + fi + KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) + KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) + KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) + KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) + ENABLE_PERMISSIVE_FLAG="-fpermissive" + + if test "$kde_use_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c header files) + echo >conftest.h + if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + if test "$kde_gcc_supports_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c++ header files) + if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + fi + rm -f conftest.h conftest.h.gch + fi + + KDE_CHECK_FOR_OPT_NOINLINE_MATCH + if test "x$kde_cv_opt_noinline_match" = "xno" ; then + CFLAGS="`echo "$CFLAGS" | sed "s/ -fno-inline//"`" + fi + fi + AM_CONDITIONAL(unsermake_enable_pch, test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes") + if test "$CXX" = "KCC"; then + dnl unfortunately we currently cannot disable exception support in KCC + dnl because doing so is binary incompatible and Qt by default links with exceptions :-( + dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) + dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) + + if test "$kde_use_pch" = "yes"; then + dnl TODO: support --pch-dir! + KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) + dnl the below works (but the dir must exist), but it's + dnl useless for a whole package. + dnl The are precompiled headers for each source file, so when compiling + dnl from scratch, it doesn't make a difference, and they take up + dnl around ~5Mb _per_ sourcefile. + dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, + dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) + fi + dnl this flag controls inlining. by default KCC inlines in optimisation mode + dnl all implementations that are defined inside the class {} declaration. + dnl because of templates-compatibility with broken gcc compilers, this + dnl can cause excessive inlining. This flag limits it to a sane level + KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) + KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) + KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) + KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) + dnl Some source files are shared between multiple executables + dnl (or libraries) and some of those need template instantiations. + dnl In that case KCC needs to compile those sources with + dnl --one_instantiation_per_object. To make it easy for us we compile + dnl _all_ objects with that flag (--one_per is a shorthand). + KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) + fi + AC_SUBST(USE_EXCEPTIONS) + dnl obsolete macro - provided to keep things going + USE_RTTI= + AC_SUBST(USE_RTTI) + + case "$host" in + *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; + *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; + *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; + *-*-solaris*) + if test "$GXX" = yes; then + libstdcpp=`$CXX -print-file-name=libstdc++.so` + if test ! -f $libstdcpp; then + AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) + fi + fi + ;; + esac + + AC_VALIDIFY_CXXFLAGS + + AC_PROG_CXXCPP + + if test "$GCC" = yes; then + NOOPT_CFLAGS=-O0 + fi + KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) + + AC_ARG_ENABLE(coverage, + AC_HELP_STRING([--enable-coverage],[use gcc coverage testing]), [ + if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="-lgcc" + elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="" + else + AC_MSG_ERROR([coverage with your compiler is not supported]) + fi + CFLAGS="$CFLAGS $ac_coverage_compiler" + CXXFLAGS="$CXXFLAGS $ac_coverage_compiler" + LDFLAGS="$LDFLAGS $ac_coverage_linker" + ]) + + AC_SUBST(NOOPT_CXXFLAGS) + AC_SUBST(NOOPT_CFLAGS) + AC_SUBST(ENABLE_PERMISSIVE_FLAG) + + KDE_CHECK_NEW_LDFLAGS + KDE_CHECK_FINAL + KDE_CHECK_CLOSURE + KDE_CHECK_NMCHECK + + ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) +]) + +AC_DEFUN([KDE_CHECK_VISIBILITY_GCC_BUG], + [ + AC_CACHE_CHECK([for gcc -fvisibility-inlines-hidden bug], kde_cv_val_gcc_visibility_bug, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIC -fvisibility-inlines-hidden -O0" + LDFLAGS="$LDFLAGS -shared -fPIC" + + AC_TRY_LINK( + [ + /* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 */ + #include <string> + int some_function( void ) __attribute__ ((visibility("default"))); + int some_function( void ) + { + std::string s("blafasel"); + return 0; + } + ], [/* elvis is alive */], + kde_cv_val_gcc_visibility_bug=no, kde_cv_val_gcc_visibility_bug=yes) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_cv_val_gcc_visibility_bug = xno; then + CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden" + fi + ] +) + +AC_DEFUN([KDE_ENABLE_HIDDEN_VISIBILITY], +[ + AC_BEFORE([AC_PATH_QT_1_3], [KDE_ENABLE_HIDDEN_VISIBILITY]) + + AC_MSG_CHECKING([grepping for visibility push/pop in headers]) + + if test "x$GXX" = "xyes"; then + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_EGREP_CPP( + [GCC visibility push], + [ #include <exception> + ], + [ + AC_MSG_RESULT(yes) + kde_stdc_visibility_patched=yes ], + [ + AC_MSG_RESULT(no) + AC_MSG_WARN([Your libstdc++ doesn't appear to be patched for + visibility support. Disabling -fvisibility=hidden]) + + kde_stdc_visibility_patched=no ]) + + AC_LANG_RESTORE + + kde_have_gcc_visibility=no + KDE_CHECK_COMPILER_FLAG(fvisibility=hidden, + [ + kde_have_gcc_visibility=yes + dnl the whole toolchain is just a mess, gcc is just too buggy + dnl to handle STL with visibility enabled. Lets reconsider + dnl when gcc 4.2 is out or when things get fixed in the compiler. + dnl Contact mueller@kde.org for details. + AC_ARG_ENABLE(gcc-hidden-visibility, + AC_HELP_STRING([--enable-gcc-hidden-visibility],[toolchain hidden visibility [default=no]]), + [kde_have_gcc_visibility=$enableval], + [kde_have_gcc_visibility=no]) + + AC_CACHE_CHECK([if Qt is patched for -fvisibility], kde_cv_val_qt_gcc_visibility_patched, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + CXXFLAGS="$CXXFLAGS $all_includes" + + AC_TRY_COMPILE( + [ +#include <qglobal.h> +#if Q_EXPORT - 0 != 0 +/* if this compiles, then Q_EXPORT is undefined */ +/* if Q_EXPORT is nonempty, this will break compilation */ +#endif + ], [/* elvis is alive */], + kde_cv_val_qt_gcc_visibility_patched=no, kde_cv_val_qt_gcc_visibility_patched=yes) + + CXXFLAGS=$safe_CXXFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_have_gcc_visibility = "xyes" && test x$kde_stdc_visibility_patched = "xyes" && test x$kde_cv_val_qt_gcc_visibility_patched = "xyes"; then + CXXFLAGS="$CXXFLAGS -fvisibility=hidden" + KDE_CHECK_VISIBILITY_GCC_BUG + HAVE_GCC_VISIBILITY=1 + AC_DEFINE_UNQUOTED(__KDE_HAVE_GCC_VISIBILITY, "$HAVE_GCC_VISIBILITY", [define to 1 if -fvisibility is supported]) + fi + ]) + fi +]) + +AC_DEFUN([KDE_ADD_DEPENDENCIES], +[ + [A]M_DEPENDENCIES(CC) + [A]M_DEPENDENCIES(CXX) +]) + +dnl just a wrapper to clean up configure.in +AC_DEFUN([KDE_PROG_LIBTOOL], +[ +AC_REQUIRE([AC_CHECK_COMPILERS]) +AC_REQUIRE([AC_ENABLE_SHARED]) +AC_REQUIRE([AC_ENABLE_STATIC]) + +AC_REQUIRE([AC_LIBTOOL_DLOPEN]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_OBJEXT +AC_EXEEXT + +AM_PROG_LIBTOOL +AC_LIBTOOL_CXX + +LIBTOOL_SHELL="/bin/sh ./libtool" +# LIBTOOL="$LIBTOOL --silent" +KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" +AC_SUBST(KDE_PLUGIN) + +# This hack ensures that libtool creates shared libs for kunittest plugins. By default check_LTLIBRARIES makes static libs. +KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)" +AC_SUBST(KDE_CHECK_PLUGIN) + +# we patch configure quite some so we better keep that consistent for incremental runs +AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') +]) + +AC_DEFUN([KDE_CHECK_LIB64], +[ + AC_ARG_ENABLE(libsuffix, + AC_HELP_STRING([--enable-libsuffix], + [/lib directory suffix (64,32,none,auto[=default])]), + kdelibsuff=$enableval, kdelibsuff="auto") + + if test "$kdelibsuff" = "auto"; then + +cat > conftest.c << EOF +#include <stdio.h> +int main() { + return 0; +} +EOF + kdelibsuff=`$CC conftest.c -o conftest.out; ldd conftest.out |sed -ne '/libc.so/{ + s,.*/lib\([[^\/]]*\)/.*,\1, + p +}'` + rm -rf conftest.* + fi + + if test "$kdelibsuff" = "no" || test "$kdelibsuff" = "none"; then + kdelibsuff= + fi + if test -z "$kdelibsuff"; then + AC_MSG_RESULT([not using lib directory suffix]) + AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) + else + if test "$libdir" = '${exec_prefix}/lib'; then + libdir="$libdir${kdelibsuff}" + AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms + fi + AC_DEFINE_UNQUOTED(KDELIBSUFF, ["${kdelibsuff}"], Suffix for lib directories) + AC_MSG_RESULT([using lib directory suffix $kdelibsuff]) + fi +]) + +AC_DEFUN([KDE_CHECK_TYPES], +[ AC_CHECK_SIZEOF(int, 4)dnl + AC_CHECK_SIZEOF(short)dnl + AC_CHECK_SIZEOF(long, 4)dnl + AC_CHECK_SIZEOF(char *, 4)dnl +])dnl + +dnl Not used - kept for compat only? +AC_DEFUN([KDE_DO_IT_ALL], +[ +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM +AM_INIT_AUTOMAKE($1, $2) +AM_DISABLE_LIBRARIES +AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) +AC_CHECK_COMPILERS +KDE_PROG_LIBTOOL +AM_KDE_WITH_NLS +AC_PATH_KDE +]) + +AC_DEFUN([AC_CHECK_RPATH], +[ +AC_MSG_CHECKING(for rpath) +AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), + USE_RPATH=$enableval, USE_RPATH=yes) + +if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then + + KDE_RPATH="-R \$(libdir)" + + if test "$kde_libraries" != "$libdir"; then + KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)" + fi + + if test -n "$qt_libraries"; then + KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" + fi + dnl $x_libraries is set to /usr/lib in case + if test -n "$X_LDFLAGS"; then + X_RPATH="-R \$(x_libraries)" + KDE_RPATH="$KDE_RPATH $X_RPATH" + fi + if test -n "$KDE_EXTRA_RPATH"; then + KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" + fi +fi +AC_SUBST(KDE_EXTRA_RPATH) +AC_SUBST(KDE_RPATH) +AC_SUBST(X_RPATH) +AC_MSG_RESULT($USE_RPATH) +]) + +dnl Check for the type of the third argument of getsockname +AC_DEFUN([AC_CHECK_SOCKLEN_T], +[ + AC_MSG_CHECKING(for socklen_t) + AC_CACHE_VAL(kde_cv_socklen_t, + [ + AC_LANG_PUSH(C++) + kde_cv_socklen_t=no + AC_TRY_COMPILE([ + #include <sys/types.h> + #include <sys/socket.h> + ], + [ + socklen_t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t=yes + kde_cv_socklen_t_equiv=socklen_t + ]) + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t) + if test $kde_cv_socklen_t = no; then + AC_MSG_CHECKING([for socklen_t equivalent for socket functions]) + AC_CACHE_VAL(kde_cv_socklen_t_equiv, + [ + kde_cv_socklen_t_equiv=int + AC_LANG_PUSH(C++) + for t in int size_t unsigned long "unsigned long"; do + AC_TRY_COMPILE([ + #include <sys/types.h> + #include <sys/socket.h> + ], + [ + $t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t_equiv="$t" + break + ]) + done + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t_equiv) + fi + AC_DEFINE_UNQUOTED(kde_socklen_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined]) + AC_DEFINE_UNQUOTED(ksize_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined (deprecated, use kde_socklen_t)]) +]) + +dnl This is a merge of some macros out of the gettext aclocal.m4 +dnl since we don't need anything, I took the things we need +dnl the copyright for them is: +dnl > +dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +dnl This Makefile.in is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. +dnl > +dnl for this file it is relicensed under LGPL + +AC_DEFUN([AM_KDE_WITH_NLS], + [ + dnl If we use NLS figure out what method + + AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, + [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then + AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + MSGFMT=$GMSGFMT + AC_SUBST(GMSGFMT) + AC_SUBST(MSGFMT) + + AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + AC_MSG_RESULT( + [found xgettext programs is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + fi + AC_SUBST(XGETTEXT) + + ]) + +# Search path for a program which passes the given test. +# Ulrich Drepper <drepper@cygnus.com>, 1996. + +# serial 1 +# Stephan Kulow: I appended a _KDE against name conflicts + +dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], +[# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + /*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in ifelse([$5], , $PATH, [$5]); do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test -n "[$]$1"; then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) + + +# Check whether LC_MESSAGES is available in <locale.h>. +# Ulrich Drepper <drepper@cygnus.com>, 1995. + +# serial 1 + +AC_DEFUN([AM_LC_MESSAGES], + [if test $ac_cv_header_locale_h = yes; then + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) + fi + fi]) + +dnl From Jim Meyering. +dnl FIXME: migrate into libit. + +AC_DEFUN([AM_FUNC_OBSTACK], +[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, + [AC_TRY_LINK([#include "obstack.h"], + [struct obstack *mem;obstack_free(mem,(char *) 0)], + am_cv_func_obstack=yes, + am_cv_func_obstack=no)]) + if test $am_cv_func_obstack = yes; then + AC_DEFINE(HAVE_OBSTACK) + else + LIBOBJS="$LIBOBJS obstack.o" + fi +]) + +dnl From Jim Meyering. Use this if you use the GNU error.[ch]. +dnl FIXME: Migrate into libit + +AC_DEFUN([AM_FUNC_ERROR_AT_LINE], +[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, + [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], + am_cv_lib_error_at_line=yes, + am_cv_lib_error_at_line=no)]) + if test $am_cv_lib_error_at_line = no; then + LIBOBJS="$LIBOBJS error.o" + fi + AC_SUBST(LIBOBJS)dnl +]) + +# Macro to add for using GNU gettext. +# Ulrich Drepper <drepper@cygnus.com>, 1995. + +# serial 1 +# Stephan Kulow: I put a KDE in it to avoid name conflicts + +AC_DEFUN([AM_KDE_GNU_GETTEXT], + [AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([AM_KDE_WITH_NLS])dnl + AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) + AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ +__argz_count __argz_stringify __argz_next]) + + AC_MSG_CHECKING(for stpcpy) + AC_CACHE_VAL(kde_cv_func_stpcpy, + [ + kde_safe_cxxflags=$CXXFLAGS + CXXFLAGS="-Werror" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_COMPILE([ + #include <string.h> + ], + [ + char buffer[200]; + stpcpy(buffer, buffer); + ], + kde_cv_func_stpcpy=yes, + kde_cv_func_stpcpy=no) + AC_LANG_RESTORE + CXXFLAGS=$kde_safe_cxxflags + ]) + AC_MSG_RESULT($kde_cv_func_stpcpy) + if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then + AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) + fi + + AM_LC_MESSAGES + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + AC_MSG_CHECKING(for catalogs to be installed) + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + AC_MSG_RESULT($LINGUAS) + fi + + dnl Construct list of names of catalog files to be constructed. + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + ]) + +AC_DEFUN([AC_HAVE_XPM], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= + test -z "$XPM_INCLUDE" && XPM_INCLUDE= + + AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), + xpm_test=$withval, xpm_test="yes") + if test "x$xpm_test" = xno; then + ac_cv_have_xpm=no + else + AC_MSG_CHECKING(for XPM) + AC_CACHE_VAL(ac_cv_have_xpm, + [ + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" + else + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" + fi + CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" + test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" + AC_TRY_LINK([#include <X11/xpm.h>],[], + ac_cv_have_xpm="yes",ac_cv_have_xpm="no") + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + ])dnl + + if test "$ac_cv_have_xpm" = no; then + AC_MSG_RESULT(no) + XPM_LDFLAGS="" + XPMINC="" + $2 + else + AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) + if test "$XPM_LDFLAGS" = ""; then + XPMLIB='-lXpm $(LIB_X11)' + else + XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' + fi + if test "$XPM_INCLUDE" = ""; then + XPMINC="" + else + XPMINC="-I$XPM_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + AC_SUBST(XPMINC) + AC_SUBST(XPMLIB) +]) + +AC_DEFUN([AC_HAVE_DPMS], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= + test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= + DPMS_LIB= + + AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), + dpms_test=$withval, dpms_test="yes") + if test "x$dpms_test" = xno; then + ac_cv_have_dpms=no + else + AC_MSG_CHECKING(for DPMS) + dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. + dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". + AC_CACHE_VAL(ac_cv_have_dpms, + [ + if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then + AC_MSG_RESULT(no) + ac_cv_have_dpms="no" + else + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + ac_save_libs="$LIBS" + LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries" + LIBS="-lX11 -lXext $LIBSOCKET" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AC_TRY_LINK([ + #include <X11/Xproto.h> + #include <X11/X.h> + #include <X11/Xlib.h> + #include <X11/extensions/dpms.h> + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + ac_cv_have_dpms="yes", [ + LIBS="-lXdpms $LIBS" + AC_TRY_LINK([ + #include <X11/Xproto.h> + #include <X11/X.h> + #include <X11/Xlib.h> + #include <X11/extensions/dpms.h> + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + [ + ac_cv_have_dpms="-lXdpms" + ],ac_cv_have_dpms="no") + ]) + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + LIBS="$ac_save_libs" + fi + ])dnl + + if test "$ac_cv_have_dpms" = no; then + AC_MSG_RESULT(no) + DPMS_LDFLAGS="" + DPMSINC="" + $2 + else + AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) + if test "$ac_cv_have_dpms" = "-lXdpms"; then + DPMS_LIB="-lXdpms" + fi + if test "$DPMS_LDFLAGS" = ""; then + DPMSLIB="$DPMS_LIB "'$(LIB_X11)' + else + DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' + fi + if test "$DPMS_INCLUDE" = ""; then + DPMSINC="" + else + DPMSINC="-I$DPMS_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + ac_save_cflags="$CFLAGS" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, + [Define if you have the DPMSCapable prototype in <X11/extensions/dpms.h>]) + AC_CHECK_DECL(DPMSCapable, + AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, + [#include <X11/Xlib.h> + #include <X11/extensions/dpms.h>]) + AH_TEMPLATE(HAVE_DPMSINFO_PROTO, + [Define if you have the DPMSInfo prototype in <X11/extensions/dpms.h>]) + AC_CHECK_DECL(DPMSInfo, + AC_DEFINE(HAVE_DPMSINFO_PROTO),, + [#include <X11/Xlib.h> + #include <X11/extensions/dpms.h>]) + CFLAGS="$ac_save_cflags" + AC_SUBST(DPMSINC) + AC_SUBST(DPMSLIB) +]) + +AC_DEFUN([AC_HAVE_GL], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$GL_LDFLAGS" && GL_LDFLAGS= + test -z "$GL_INCLUDE" && GL_INCLUDE= + + AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), + gl_test=$withval, gl_test="yes") + if test "x$kde_use_qt_emb" = "xyes"; then + # GL and Qt Embedded is a no-go for now. + ac_cv_have_gl=no + elif test "x$gl_test" = xno; then + ac_cv_have_gl=no + else + AC_MSG_CHECKING(for GL) + AC_CACHE_VAL(ac_cv_have_gl, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_ldflags=$LDFLAGS + ac_save_cxxflags=$CXXFLAGS + ac_save_libs=$LIBS + LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries" + LIBS="$LIBS -lGL -lGLU" + test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LIBS="$LIBS -lX11" + LIBS="$LIBS $LIB_XEXT -lm $LIBSOCKET" + CXXFLAGS="$CFLAGS $X_INCLUDES" + test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" + AC_TRY_LINK([#include <GL/gl.h> +#include <GL/glu.h> +], [], + ac_cv_have_gl="yes", ac_cv_have_gl="no") + AC_LANG_RESTORE + LDFLAGS=$ac_save_ldflags + CXXFLAGS=$ac_save_cxxflags + LIBS=$ac_save_libs + ])dnl + + if test "$ac_cv_have_gl" = "no"; then + AC_MSG_RESULT(no) + GL_LDFLAGS="" + GLINC="" + $2 + else + AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) + if test "$GL_LDFLAGS" = ""; then + GLLIB='-lGLU -lGL $(LIB_X11)' + else + GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' + fi + if test "$GL_INCLUDE" = ""; then + GLINC="" + else + GLINC="-I$GL_INCLUDE" + fi + AC_MSG_RESULT($ac_cv_have_gl) + $1 + fi + fi + AC_SUBST(GLINC) + AC_SUBST(GLLIB) +]) + + + dnl shadow password and PAM magic - maintained by ossi@kde.org + +AC_DEFUN([KDE_PAM], [ + AC_REQUIRE([KDE_CHECK_LIBDL]) + + want_pam= + AC_ARG_WITH(pam, + AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), + [ if test "x$withval" = "xyes"; then + want_pam=yes + pam_service=kde + elif test "x$withval" = "xno"; then + want_pam=no + else + want_pam=yes + pam_service=$withval + fi + ], [ pam_service=kde ]) + + use_pam= + PAMLIBS= + if test "x$want_pam" != xno; then + AC_CHECK_LIB(pam, pam_start, [ + AC_CHECK_HEADER(security/pam_appl.h, + [ pam_header=security/pam_appl.h ], + [ AC_CHECK_HEADER(pam/pam_appl.h, + [ pam_header=pam/pam_appl.h ], + [ + AC_MSG_WARN([PAM detected, but no headers found! +Make sure you have the necessary development packages installed.]) + ] + ) + ] + ) + ], , $LIBDL) + if test -z "$pam_header"; then + if test "x$want_pam" = xyes; then + AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) + fi + else + AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) + PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" + use_pam=yes + + dnl darwin claims to be something special + if test "$pam_header" = "pam/pam_appl.h"; then + AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) + fi + + dnl test whether struct pam_message is const (Linux) or not (Sun) + AC_MSG_CHECKING(for const pam_message) + AC_EGREP_HEADER([struct pam_message], $pam_header, + [ AC_EGREP_HEADER([const struct pam_message], $pam_header, + [AC_MSG_RESULT([const: Linux-type PAM])], + [AC_MSG_RESULT([nonconst: Sun-type PAM]) + AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] + )], + [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) + fi + fi + + AC_SUBST(PAMLIBS) +]) + +dnl DEF_PAM_SERVICE(arg name, full name, define name) +AC_DEFUN([DEF_PAM_SERVICE], [ + AC_ARG_WITH($1-pam, + AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE=$withval + else + AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. +You may want to enforce it by using --with-pam.]) + fi + ], + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE="$pam_service" + fi + ]) + if test -n "$$3_PAM_SERVICE"; then + AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) + AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) + fi + AC_SUBST($3_PAM_SERVICE) +]) + +AC_DEFUN([KDE_SHADOWPASSWD], [ + AC_REQUIRE([KDE_PAM]) + + AC_CHECK_LIB(shadow, getspent, + [ LIBSHADOW="-lshadow" + ac_use_shadow=yes + ], + [ dnl for UnixWare + AC_CHECK_LIB(gen, getspent, + [ LIBGEN="-lgen" + ac_use_shadow=yes + ], + [ AC_CHECK_FUNC(getspent, + [ ac_use_shadow=yes ], + [ ac_use_shadow=no ]) + ]) + ]) + AC_SUBST(LIBSHADOW) + AC_SUBST(LIBGEN) + + AC_MSG_CHECKING([for shadow passwords]) + + AC_ARG_WITH(shadow, + AC_HELP_STRING([--with-shadow],[If you want shadow password support]), + [ if test "x$withval" != "xno"; then + use_shadow=yes + else + use_shadow=no + fi + ], [ + use_shadow="$ac_use_shadow" + ]) + + if test "x$use_shadow" = xyes; then + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) + else + AC_MSG_RESULT(no) + LIBSHADOW= + LIBGEN= + fi + + dnl finally make the relevant binaries setuid root, if we have shadow passwds. + dnl this still applies, if we could use it indirectly through pam. + if test "x$use_shadow" = xyes || + ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then + case $host in + *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) + SETUIDFLAGS="-m 4755 -o root";; + *) + SETUIDFLAGS="-m 4755";; + esac + fi + AC_SUBST(SETUIDFLAGS) + +]) + +AC_DEFUN([KDE_PASSWDLIBS], [ + AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT + AC_REQUIRE([KDE_PAM]) + AC_REQUIRE([KDE_SHADOWPASSWD]) + + if test "x$use_pam" = "xyes"; then + PASSWDLIBS="$PAMLIBS" + else + PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" + fi + + dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but + dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires + dnl root to read, so kcheckpass needs to be root (even when using pam, since pam + dnl may need to read /etc/master.passwd). + case $host in + *-*-freebsd*) + SETUIDFLAGS="-m 4755 -o root" + ;; + *) + ;; + esac + + AC_SUBST(PASSWDLIBS) +]) + +AC_DEFUN([KDE_CHECK_LIBDL], +[ +AC_CHECK_LIB(dl, dlopen, [ +LIBDL="-ldl" +ac_cv_have_dlfcn=yes +]) + +AC_CHECK_LIB(dld, shl_unload, [ +LIBDL="-ldld" +ac_cv_have_shload=yes +]) + +AC_SUBST(LIBDL) +]) + +AC_DEFUN([KDE_CHECK_DLOPEN], +[ +KDE_CHECK_LIBDL +AC_CHECK_HEADERS(dlfcn.h dl.h) +if test "$ac_cv_header_dlfcn_h" = "no"; then + ac_cv_have_dlfcn=no +fi + +if test "$ac_cv_header_dl_h" = "no"; then + ac_cv_have_shload=no +fi + +dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE +dnl (MM) +AC_ARG_ENABLE(dlopen, +AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), +enable_dlopen=$enableval, +enable_dlopen=yes) + +# override the user's opinion, if we know it better ;) +if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then + enable_dlopen=no +fi + +if test "$ac_cv_have_dlfcn" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) +fi + +if test "$ac_cv_have_shload" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) +fi + +if test "$enable_dlopen" = no ; then + test -n "$1" && eval $1 +else + test -n "$2" && eval $2 +fi + +]) + +AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], +[ +KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) +KDE_PROG_LIBTOOL +AC_MSG_CHECKING([dynamic loading]) +eval "`egrep '^build_libtool_libs=' libtool`" +if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then + dynamic_loading=yes + AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) +else + dynamic_loading=no +fi +AC_MSG_RESULT($dynamic_loading) +if test "$dynamic_loading" = "yes"; then + $1 +else + $2 +fi +]) + +AC_DEFUN([KDE_ADD_INCLUDES], +[ +if test -z "$1"; then + test_include="Pix.h" +else + test_include="$1" +fi + +AC_MSG_CHECKING([for libg++ ($test_include)]) + +AC_CACHE_VAL(kde_cv_libgpp_includes, +[ +kde_cv_libgpp_includes=no + + for ac_dir in \ + \ + /usr/include/g++ \ + /usr/include \ + /usr/unsupported/include \ + /opt/include \ + $extra_include \ + ; \ + do + if test -r "$ac_dir/$test_include"; then + kde_cv_libgpp_includes=$ac_dir + break + fi + done +]) + +AC_MSG_RESULT($kde_cv_libgpp_includes) +if test "$kde_cv_libgpp_includes" != "no"; then + all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" +fi +]) +]) + +AC_DEFUN([KDE_CHECK_LIBPTHREAD], +[ + dnl This code is here specifically to handle the + dnl various flavors of threading library on FreeBSD + dnl 4-, 5-, and 6-, and the (weird) rules around it. + dnl There may be an environment PTHREAD_LIBS that + dnl specifies what to use; otherwise, search for it. + dnl -pthread is special cased and unsets LIBPTHREAD + dnl below if found. + LIBPTHREAD="" + + if test -n "$PTHREAD_LIBS"; then + if test "x$PTHREAD_LIBS" = "x-pthread" ; then + LIBPTHREAD="PTHREAD" + else + PTHREAD_LIBS_save="$PTHREAD_LIBS" + PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` + AC_MSG_CHECKING([for pthread_create in $PTHREAD_LIBS]) + KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [ + LIBPTHREAD="$PTHREAD_LIBS_save"]) + PTHREAD_LIBS="$PTHREAD_LIBS_save" + fi + fi + + dnl Is this test really needed, in the face of the Tru64 test below? + if test -z "$LIBPTHREAD"; then + AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"]) + fi + + dnl This is a special Tru64 check, see BR 76171 issue #18. + if test -z "$LIBPTHREAD" ; then + AC_MSG_CHECKING([for pthread_create in -lpthread]) + kde_safe_libs=$LIBS + LIBS="$LIBS -lpthread" + AC_TRY_LINK([#include <pthread.h>],[(void)pthread_create(0,0,0,0);],[ + AC_MSG_RESULT(yes) + LIBPTHREAD="-lpthread"],[ + AC_MSG_RESULT(no)]) + LIBS=$kde_safe_libs + fi + + dnl Un-special-case for FreeBSD. + if test "x$LIBPTHREAD" = "xPTHREAD" ; then + LIBPTHREAD="" + fi + + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], +[ + USE_THREADS="" + if test -z "$LIBPTHREAD"; then + KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) + fi + + AH_VERBATIM(__svr_define, [ +#if defined(__SVR4) && !defined(__svr4__) +#define __svr4__ 1 +#endif +]) + case $host_os in + solaris*) + KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) + CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" + ;; + freebsd*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" + ;; + aix*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" + LIBPTHREAD="$LIBPTHREAD -lc_r" + ;; + linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" + if test "$CXX" = "KCC"; then + CXXFLAGS="$CXXFLAGS --thread_safe" + NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" + fi + ;; + *) + ;; + esac + AC_SUBST(USE_THREADS) + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_THREADING], +[ + AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) + AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) + dnl default is yes if libpthread is found and no if no libpthread is available + if test -z "$LIBPTHREAD"; then + if test -z "$USE_THREADS"; then + kde_check_threading_default=no + else + kde_check_threading_default=yes + fi + else + kde_check_threading_default=yes + fi + AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), + kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) + if test "x$kde_use_threading" = "xyes"; then + AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) + fi +]) + +AC_DEFUN([KDE_TRY_LINK_PYTHON], +[ +if test "$kde_python_link_found" = no; then + +if test "$1" = normal; then + AC_MSG_CHECKING(if a Python application links) +else + AC_MSG_CHECKING(if Python depends on $2) +fi + +AC_CACHE_VAL(kde_cv_try_link_python_$1, +[ +kde_save_cflags="$CFLAGS" +CFLAGS="$CFLAGS $PYTHONINC" +kde_save_libs="$LIBS" +LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" +kde_save_ldflags="$LDFLAGS" +LDFLAGS="$LDFLAGS $PYTHONLIB" + +AC_TRY_LINK( +[ +#include <Python.h> +],[ + PySys_SetArgv(1, 0); +], + [kde_cv_try_link_python_$1=yes], + [kde_cv_try_link_python_$1=no] +) +CFLAGS="$kde_save_cflags" +LIBS="$kde_save_libs" +LDFLAGS="$kde_save_ldflags" +]) + +if test "$kde_cv_try_link_python_$1" = "yes"; then + AC_MSG_RESULT(yes) + kde_python_link_found=yes + if test ! "$1" = normal; then + LIBPYTHON="$LIBPYTHON $2" + fi + $3 +else + AC_MSG_RESULT(no) + $4 +fi + +fi + +]) + +AC_DEFUN([KDE_CHECK_PYTHON_DIR], +[ +AC_MSG_CHECKING([for Python directory]) + +AC_CACHE_VAL(kde_cv_pythondir, +[ + if test -z "$PYTHONDIR"; then + kde_cv_pythondir=/usr/local + else + kde_cv_pythondir="$PYTHONDIR" + fi +]) + +AC_ARG_WITH(pythondir, +AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), +[ + ac_python_dir=$withval +], ac_python_dir=$kde_cv_pythondir +) + +AC_MSG_RESULT($ac_python_dir) +]) + +AC_DEFUN([KDE_CHECK_PYTHON_INTERN], +[ +AC_REQUIRE([KDE_CHECK_LIBDL]) +AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) +AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) + +if test -z "$1"; then + version="1.5" +else + version="$1" +fi + +AC_MSG_CHECKING([for Python$version]) + +python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" +AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) +if test ! -r $python_incdir/Python.h; then + AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) + python_incdir=$python_incdir/python$version + if test ! -r $python_incdir/Python.h; then + python_incdir=no + fi +fi + +PYTHONINC=-I$python_incdir + +python_libdirs="$ac_python_dir/lib$kdelibsuff /usr/lib$kdelibsuff /usr/local /usr/lib$kdelibsuff $kde_extra_libs" +AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) +if test ! -r $python_libdir/libpython$version.so; then + AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) + if test ! -r $python_libdir/libpython$version.a; then + AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) + python_libdir=$python_libdir/python$version/config + if test ! -r $python_libdir/libpython$version.a; then + python_libdir=no + fi + fi +fi + +PYTHONLIB=-L$python_libdir +kde_orig_LIBPYTHON=$LIBPYTHON +if test -z "$LIBPYTHON"; then + LIBPYTHON=-lpython$version +fi + +AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) +python_moddir=$python_moddir/python$version +if test ! -r $python_moddir/copy.py; then + python_moddir=no +fi + +PYTHONMODDIR=$python_moddir + +AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) + +if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then + LIBPYTHON=$kde_orig_LIBPYTHON + test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" + test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" + $2 +else + dnl Note: this test is very weak + kde_python_link_found=no + KDE_TRY_LINK_PYTHON(normal) + KDE_TRY_LINK_PYTHON(m, -lm) + KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) + KDE_TRY_LINK_PYTHON(tcl, -ltcl) + KDE_TRY_LINK_PYTHON(db2, -ldb2) + KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) + KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], + [AC_MSG_WARN([it seems, Python depends on another library. + Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this + and contact the authors to let them know about this problem]) + ]) + + LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" + AC_SUBST(PYTHONINC) + AC_SUBST(PYTHONLIB) + AC_SUBST(LIBPYTHON) + AC_SUBST(PYTHONMODDIR) + AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_PYTHON], +[ + KDE_CHECK_PYTHON_INTERN("2.5", + [KDE_CHECK_PYTHON_INTERN("2.4", + [KDE_CHECK_PYTHON_INTERN("2.3", + [KDE_CHECK_PYTHON_INTERN("2.2", + [KDE_CHECK_PYTHON_INTERN("2.1", + [KDE_CHECK_PYTHON_INTERN("2.0", + [KDE_CHECK_PYTHON_INTERN($1, $2) ]) + ]) + ]) + ]) + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_STL], +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" + + AC_MSG_CHECKING([if C++ programs can be compiled]) + AC_CACHE_VAL(kde_cv_stl_works, + [ + AC_TRY_COMPILE([ +#include <string> +using namespace std; +],[ + string astring="Hallo Welt."; + astring.erase(0, 6); // now astring is "Welt" + return 0; +], kde_cv_stl_works=yes, + kde_cv_stl_works=no) +]) + + AC_MSG_RESULT($kde_cv_stl_works) + + if test "$kde_cv_stl_works" = "yes"; then + # back compatible + AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) + else + AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. +Check config.log for details - if you're using a Linux distribution you might miss +a package named similar to libstdc++-dev.]) + fi + + CXXFLAGS="$ac_save_CXXFLAGS" + AC_LANG_RESTORE +]) + +AC_DEFUN([AC_FIND_QIMGIO], + [AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for qimgio]) +AC_CACHE_VAL(ac_cv_lib_qimgio, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +ac_save_CXXFLAGS="$CXXFLAGS" +LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +AC_TRY_RUN(dnl +[ +#include <qimageio.h> +#include <qstring.h> +int main() { + QString t = "hallo"; + t.fill('t'); + qInitImageIO(); +} +], + ac_cv_lib_qimgio=yes, + ac_cv_lib_qimgio=no, + ac_cv_lib_qimgio=no) +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then + LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) + AC_SUBST(LIBQIMGIO) +else + AC_MSG_RESULT(not found) +fi +]) + +AC_DEFUN([AM_DISABLE_LIBRARIES], +[ + AC_PROVIDE([AM_ENABLE_STATIC]) + AC_PROVIDE([AM_ENABLE_SHARED]) + enable_static=no + enable_shared=yes +]) + + +AC_DEFUN([AC_CHECK_UTMP_FILE], +[ + AC_MSG_CHECKING([for utmp file]) + + AC_CACHE_VAL(kde_cv_utmp_file, + [ + kde_cv_utmp_file=no + + for ac_file in \ + \ + /var/run/utmp \ + /var/adm/utmp \ + /etc/utmp \ + ; \ + do + if test -r "$ac_file"; then + kde_cv_utmp_file=$ac_file + break + fi + done + ]) + + if test "$kde_cv_utmp_file" != "no"; then + AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) + $1 + AC_MSG_RESULT($kde_cv_utmp_file) + else + $2 + AC_MSG_RESULT([non found]) + fi +]) + + +AC_DEFUN([KDE_CREATE_SUBDIRSLIST], +[ + +DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" +TOPSUBDIRS="" + +if test ! -s $srcdir/subdirs; then + dnl Note: Makefile.common creates subdirs, so this is just a fallback + files=`cd $srcdir && ls -1` + dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` + for i in $dirs; do + echo $i >> $srcdir/subdirs + done +fi + +ac_topsubdirs= +if test -s $srcdir/inst-apps; then + ac_topsubdirs="`cat $srcdir/inst-apps`" +elif test -s $srcdir/subdirs; then + ac_topsubdirs="`cat $srcdir/subdirs`" +fi + +for i in $ac_topsubdirs; do + AC_MSG_CHECKING([if $i should be compiled]) + if test -d $srcdir/$i; then + install_it="yes" + for j in $DO_NOT_COMPILE; do + if test $i = $j; then + install_it="no" + fi + done + else + install_it="no" + fi + AC_MSG_RESULT($install_it) + vari=`echo $i | sed -e 's,[[-+.@]],_,g'` + if test $install_it = "yes"; then + TOPSUBDIRS="$TOPSUBDIRS $i" + eval "$vari""_SUBDIR_included=yes" + else + eval "$vari""_SUBDIR_included=no" + fi +done + +AC_SUBST(TOPSUBDIRS) +]) + +AC_DEFUN([KDE_CHECK_NAMESPACES], +[ +AC_MSG_CHECKING(whether C++ compiler supports namespaces) +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +AC_TRY_COMPILE([ +], +[ +namespace Foo { + extern int i; + namespace Bar { + extern int i; + } +} + +int Foo::i = 0; +int Foo::Bar::i = 1; +],[ + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_NAMESPACES) +], [ +AC_MSG_RESULT(no) +]) +AC_LANG_RESTORE +]) + +dnl ------------------------------------------------------------------------ +dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_S_ISSOCK], +[ +AC_MSG_CHECKING(for S_ISSOCK) +AC_CACHE_VAL(ac_cv_have_s_issock, +[ +AC_TRY_LINK( +[ +#include <sys/stat.h> +], +[ +struct stat buff; +int b = S_ISSOCK( buff.st_mode ); +], +ac_cv_have_s_issock=yes, +ac_cv_have_s_issock=no) +]) +AC_MSG_RESULT($ac_cv_have_s_issock) +if test "$ac_cv_have_s_issock" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) +fi + +AH_VERBATIM(_ISSOCK, +[ +#ifndef HAVE_S_ISSOCK +#define HAVE_S_ISSOCK +#define S_ISSOCK(mode) (1==0) +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], +[ +AC_MSG_CHECKING(for MAXPATHLEN) +AC_CACHE_VAL(ac_cv_maxpathlen, +[ +cat > conftest.$ac_ext <<EOF +#ifdef STDC_HEADERS +# include <stdlib.h> +#endif +#include <stdio.h> +#include <sys/param.h> +#ifndef MAXPATHLEN +#define MAXPATHLEN 1024 +#endif + +KDE_HELLO MAXPATHLEN + +EOF + +ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" + +if AC_TRY_EVAL(ac_try) && test -s conftest.out; then + ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` +else + ac_cv_maxpathlen=1024 +fi + +rm conftest.* + +]) +AC_MSG_RESULT($ac_cv_maxpathlen) +AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) +]) + +AC_DEFUN([KDE_CHECK_HEADER], +[ + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_CHECK_HEADER([$1], [$2], [$3], [$4]) + AC_LANG_RESTORE + CPPFLAGS=$kde_safe_cppflags +]) + +AC_DEFUN([KDE_CHECK_HEADERS], +[ + AH_CHECK_HEADERS([$1]) + AC_LANG_SAVE + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_CPLUSPLUS + AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) + CPPFLAGS=$kde_safe_cppflags + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_FAST_CONFIGURE], +[ + dnl makes configure fast (needs perl) + AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), + with_fast_perl=$enableval, with_fast_perl=yes) +]) + +AC_DEFUN([KDE_CONF_FILES], +[ + val= + if test -f $srcdir/configure.files ; then + val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` + fi + CONF_FILES= + if test -n "$val" ; then + for i in $val ; do + CONF_FILES="$CONF_FILES $i" + done + fi + AC_SUBST(CONF_FILES) +])dnl + +dnl This sets the prefix, for arts and kdelibs +dnl Do NOT use in any other module. +dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde +AC_DEFUN([KDE_SET_PREFIX_CORE], +[ + unset CDPATH + dnl make $KDEDIR the default for the installation + AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) + + if test "x$prefix" = "xNONE"; then + prefix=$ac_default_prefix + ac_configure_args="$ac_configure_args --prefix=$prefix" + fi + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + kde_libs_prefix='$(prefix)' + kde_libs_htmldir='$(kde_htmldir)' + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + + +AC_DEFUN([KDE_SET_PREFIX], +[ + unset CDPATH + dnl We can't give real code to that macro, only a value. + dnl It only matters for --help, since we set the prefix in this function anyway. + AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix}) + + KDE_SET_DEFAULT_BINDIRS + if test "x$prefix" = "xNONE"; then + dnl no prefix given: look for kde-config in the PATH and deduce the prefix from it + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + else + dnl prefix given: look for kde-config, preferrably in prefix, otherwise in PATH + kde_save_PATH="$PATH" + PATH="$exec_prefix/bin:$prefix/bin:$PATH" + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + PATH="$kde_save_PATH" + fi + + kde_libs_prefix=`$KDECONFIG --prefix` + if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then + AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. + This means it has been moved since you installed it. + This won't work. Please recompile kdelibs for the new prefix. + ]) + fi + kde_libs_htmldir=`$KDECONFIG --install html --expandvars` + + AC_MSG_CHECKING([where to install]) + if test "x$prefix" = "xNONE"; then + prefix=$kde_libs_prefix + AC_MSG_RESULT([$prefix (as returned by kde-config)]) + else + dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different + given_prefix=$prefix + AC_MSG_RESULT([$prefix (as requested)]) + fi + + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + AC_SUBST(KDECONFIG) + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + +pushdef([AC_PROG_INSTALL], +[ + dnl our own version, testing for a -p flag + popdef([AC_PROG_INSTALL]) + dnl as AC_PROG_INSTALL works as it works we first have + dnl to save if the user didn't specify INSTALL, as the + dnl autoconf one overwrites INSTALL and we have no chance to find + dnl out afterwards + test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL + test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM + test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT + AC_PROG_INSTALL + + if test -z "$kde_save_INSTALL_given" ; then + # OK, user hasn't given any INSTALL, autoconf found one for us + # now we test, if it supports the -p flag + AC_MSG_CHECKING(for -p flag to install) + rm -f confinst.$$.* > /dev/null 2>&1 + echo "Testtest" > confinst.$$.orig + ac_res=no + if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then + if test -f confinst.$$.new ; then + # OK, -p seems to do no harm to install + INSTALL="${INSTALL} -p" + ac_res=yes + fi + fi + rm -f confinst.$$.* + AC_MSG_RESULT($ac_res) + fi + dnl the following tries to resolve some signs and wonders coming up + dnl with different autoconf/automake versions + dnl e.g.: + dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s + dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) + dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s + dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has + dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the + dnl install-@DIR@PROGRAMS targets to explicitly use that flag + dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as + dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 + dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure + dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from + dnl automake (due to broken Makefile.am or whatever) to install programs, + dnl and so does not see the -s flag in automake > 1.4 + dnl to clean up that mess we: + dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG + dnl which cleans KDE's program with automake > 1.4; + dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems + dnl with automake<=1.4 + dnl note that dues to this sometimes two '-s' flags are used (if KDE + dnl properly uses install-@DIR@PROGRAMS, but I don't care + dnl + dnl And to all this comes, that I even can't write in comments variable + dnl names used by automake, because it is so stupid to think I wanted to + dnl _use_ them, therefor I have written A_M_... instead of AM_ + dnl hmm, I wanted to say something ... ahh yes: Arghhh. + + if test -z "$kde_save_INSTALL_PROGRAM_given" ; then + INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' + fi + if test -z "$kde_save_INSTALL_SCRIPT_given" ; then + INSTALL_SCRIPT='${INSTALL}' + fi +])dnl + +AC_DEFUN([KDE_LANG_CPLUSPLUS], +[AC_LANG_CPLUSPLUS +ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' +pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) +]) + +pushdef([AC_LANG_CPLUSPLUS], +[popdef([AC_LANG_CPLUSPLUS]) +KDE_LANG_CPLUSPLUS +]) + +AC_DEFUN([KDE_CHECK_LONG_LONG], +[ +AC_MSG_CHECKING(for long long) +AC_CACHE_VAL(kde_cv_c_long_long, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_LINK([], [ + long long foo = 0; + foo = foo+1; + ], + kde_cv_c_long_long=yes, kde_cv_c_long_long=no) + AC_LANG_RESTORE +]) +AC_MSG_RESULT($kde_cv_c_long_long) +if test "$kde_cv_c_long_long" = yes; then + AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) +fi +]) + +AC_DEFUN([KDE_CHECK_LIB], +[ + kde_save_LDFLAGS="$LDFLAGS" + dnl AC_CHECK_LIB modifies LIBS, so save it here + kde_save_LIBS="$LIBS" + LDFLAGS="$LDFLAGS $all_libraries" + case $host_os in + aix*) LDFLAGS="-brtl $LDFLAGS" + test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" + ;; + esac + AC_CHECK_LIB($1, $2, $3, $4, $5) + LDFLAGS="$kde_save_LDFLAGS" + LIBS="$kde_save_LIBS" +]) + +AC_DEFUN([KDE_JAVA_PREFIX], +[ + dir=`dirname "$1"` + base=`basename "$1"` + list=`ls -1 $dir 2> /dev/null` + for entry in $list; do + if test -d $dir/$entry/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/bin" + ;; + esac + elif test -d $dir/$entry/jre/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/jre/bin" + ;; + esac + fi + done +]) + +dnl KDE_CHEC_JAVA_DIR(onlyjre) +AC_DEFUN([KDE_CHECK_JAVA_DIR], +[ + +AC_ARG_WITH(java, +AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), +[ ac_java_dir=$withval +], ac_java_dir="" +) + +AC_MSG_CHECKING([for Java]) + +dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH +if test "x$ac_java_dir" = "xno"; then + kde_java_bindir=no + kde_java_includedir=no + kde_java_libjvmdir=no + kde_java_libgcjdir=no + kde_java_libhpidir=no +else + if test "x$ac_java_dir" = "x"; then + + + dnl No option set -> collect list of candidate paths + if test -n "$JAVA_HOME"; then + KDE_JAVA_PREFIX($JAVA_HOME) + fi + KDE_JAVA_PREFIX(/usr/j2se) + KDE_JAVA_PREFIX(/usr/lib/j2se) + KDE_JAVA_PREFIX(/usr/j*dk*) + KDE_JAVA_PREFIX(/usr/lib/j*dk*) + KDE_JAVA_PREFIX(/opt/j*sdk*) + KDE_JAVA_PREFIX(/usr/lib/java*) + KDE_JAVA_PREFIX(/usr/java*) + KDE_JAVA_PREFIX(/usr/java/j*dk*) + KDE_JAVA_PREFIX(/usr/java/j*re*) + KDE_JAVA_PREFIX(/usr/lib/SunJava2*) + KDE_JAVA_PREFIX(/usr/lib/SunJava*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava*) + KDE_JAVA_PREFIX(/opt/java*) + + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + for dir in $PATH; do + if test -d "$dir"; then + javadirs="$javadirs $dir" + fi + done + IFS=$kde_save_IFS + jredirs= + + dnl Now javadirs contains a list of paths that exist, all ending with bin/ + for dir in $javadirs; do + dnl Check for the java executable + if test -x "$dir/java"; then + sane_path=$(cd $dir; /bin/pwd) + dnl And also check for a libjvm.so somewhere under there + dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. + if test "$sane_path" != "/usr/bin"; then + libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + if test ! -f $libjvmdir/libjvm.so; then continue; fi + jredirs="$jredirs $dir" + fi + fi + done + + dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found + JAVAC= + JAVA= + kde_java_bindir=no + for dir in $jredirs; do + JAVA="$dir/java" + kde_java_bindir=$dir + if test -x "$dir/javac"; then + JAVAC="$dir/javac" + break + fi + done + + if test -n "$JAVAC"; then + dnl this substitution might not work - well, we test for jni.h below + kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` + else + kde_java_includedir=no + fi + else + dnl config option set + kde_java_bindir=$ac_java_dir/bin + if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then + kde_java_includedir=no + else + kde_java_includedir=$ac_java_dir/include + fi + fi +fi + +dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" +if test "x$kde_java_bindir" != "xno"; then + + dnl Look for libjvm.so + kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + dnl Look for libgcj.so + kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` + dnl Look for libhpi.so and avoid green threads + kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` + + dnl Now check everything's fine under there + dnl the include dir is our flag for having the JDK + if test -d "$kde_java_includedir"; then + if test ! -x "$kde_java_bindir/javac"; then + AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) + fi + if test ! -x "$kde_java_bindir/javah"; then + AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -x "$kde_java_bindir/jar"; then + AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -r "$kde_java_includedir/jni.h"; then + AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) + fi + + jni_includes="-I$kde_java_includedir" + dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. + dnl and under linux here.. + + dnl not needed for gcj + + if test "x$kde_java_libgcjdir" = "x"; then + test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" + test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" + test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" + fi + + else + JAVAC= + jni_includes= + fi + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libjvmdir/libjvm.so"; then + AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) + fi + else + if test ! -r "$kde_java_libgcjdir/libgcj.so"; then + AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) + fi + fi + + if test ! -x "$kde_java_bindir/java"; then + AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + + dnl not needed for gcj compile + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libhpidir/libhpi.so"; then + AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) + fi + fi + + if test -n "$jni_includes"; then + dnl Check for JNI version + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_cxxflags_safe="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" + + AC_TRY_COMPILE([ + #include <jni.h> + ], + [ + #ifndef JNI_VERSION_1_2 + Syntax Error + #endif + ],[ kde_jni_works=yes ], + [ kde_jni_works=no ]) + + if test $kde_jni_works = no; then + AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. + You need to have Java Development Kit (JDK) version 1.2. + + Use --with-java to specify another location. + Use --without-java to configure without java support. + Or download a newer JDK and try again. + See e.g. http://java.sun.com/products/jdk/1.2 ]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + AC_LANG_RESTORE + + dnl All tests ok, inform and subst the variables + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + if test "x$kde_java_libgcjdir" = "x"; then + JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" + else + JVMLIBS="-L$kde_java_libgcjdir -lgcj" + fi + AC_MSG_RESULT([java JDK in $kde_java_bindir]) + + else + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([java JRE in $kde_java_bindir]) + fi +elif test -d "/Library/Java/Home"; then + kde_java_bindir="/Library/Java/Home/bin" + jni_includes="-I/Library/Java/Home/include" + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + JVMLIBS="-Wl,-framework,JavaVM" + + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([Apple Java Framework]) +else + AC_MSG_RESULT([none found]) +fi + +AC_SUBST(JAVAC) +AC_SUBST(JAVAH) +AC_SUBST(JAR) +AC_SUBST(JVMLIBS) +AC_SUBST(jni_includes) + +# for backward compat +kde_cv_java_includedir=$kde_java_includedir +kde_cv_java_bindir=$kde_java_bindir +]) + +dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. +dnl When the argument list becomes big, as in KDE for AC_OUTPUT in +dnl big packages, m4_foreach is dog-slow. So use our own version of +dnl it. (matz@kde.org) +m4_define([mm_foreach], +[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) +m4_define([mm_car], [[$1]]) +m4_define([mm_car2], [[$@]]) +m4_define([_mm_foreach], +[m4_if(m4_quote($2), [], [], + [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], + mm_car2(m4_shift($2)), + [$3])])]) +m4_define([AC_FOREACH], +[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) + +AC_DEFUN([KDE_NEED_FLEX], +[ +kde_libs_safe=$LIBS +LIBS="$LIBS $USER_LDFLAGS" +AM_PROG_LEX +LIBS=$kde_libs_safe +if test -z "$LEXLIB"; then + AC_MSG_ERROR([You need to have flex installed.]) +fi +AC_SUBST(LEXLIB) +]) + +AC_DEFUN([AC_PATH_QTOPIA], +[ + dnl TODO: use AC_CACHE_VAL + + if test -z "$1"; then + qtopia_minver_maj=1 + qtopia_minver_min=5 + qtopia_minver_pat=0 + else + qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` + qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` + qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` + fi + + qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" + qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" + + AC_REQUIRE([AC_PATH_QT]) + + AC_MSG_CHECKING([for Qtopia]) + + LIB_QTOPIA="-lqpe" + AC_SUBST(LIB_QTOPIA) + + kde_qtopia_dirs="$QPEDIR /opt/Qtopia" + + ac_qtopia_incdir=NO + + AC_ARG_WITH(qtopia-dir, + AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), + [ ac_qtopia_incdir="$withval"/include] ) + + qtopia_incdirs="" + for dir in $kde_qtopia_dirs; do + qtopia_incdirs="$qtopia_incdirs $dir/include" + done + + if test ! "$ac_qtopia_incdir" = "NO"; then + qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" + fi + + qtopia_incdir="" + AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) + ac_qtopia_incdir="$qtopia_incdir" + + if test -z "$qtopia_incdir"; then + AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) + fi + + qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; + qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; + qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; + + qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" + qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" + if test "$qtopia_ver" -lt "$qtopia_minver"; then + AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr +is required.]) + fi + + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + ac_cxxflags_safe="$CXXFLAGS" + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" + LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" + LIBS="$LIBS $LIB_QTOPIA $LIBQT" + + cat > conftest.$ac_ext <<EOF +#include "confdefs.h" +#include <qpe/qpeapplication.h> +#include <qpe/version.h> + +int main( int argc, char **argv ) +{ + QPEApplication app( argc, argv ); + return 0; +} +EOF + + if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* + else + rm -f conftest* + AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at +the end of config.log]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + AC_LANG_RESTORE + + QTOPIA_INCLUDES="-I$qtopia_incdir" + AC_SUBST(QTOPIA_INCLUDES) + + AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) +]) + + +AC_DEFUN([KDE_INIT_DOXYGEN], +[ +AC_MSG_CHECKING([for Qt docs]) +kde_qtdir= +if test "${with_qt_dir+set}" = set; then + kde_qtdir="$with_qt_dir" +fi + +AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) +AC_MSG_RESULT($QTDOCDIR) + +AC_SUBST(QTDOCDIR) + +KDE_FIND_PATH(dot, DOT, [], []) +if test -n "$DOT"; then + KDE_HAVE_DOT="YES" +else + KDE_HAVE_DOT="NO" +fi +AC_SUBST(KDE_HAVE_DOT) +KDE_FIND_PATH(doxygen, DOXYGEN, [], []) +AC_SUBST(DOXYGEN) + +DOXYGEN_PROJECT_NAME="$1" +DOXYGEN_PROJECT_NUMBER="$2" +AC_SUBST(DOXYGEN_PROJECT_NAME) +AC_SUBST(DOXYGEN_PROJECT_NUMBER) + +KDE_HAS_DOXYGEN=no +if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/qsql.html; then + KDE_HAS_DOXYGEN=yes +fi +AC_SUBST(KDE_HAS_DOXYGEN) + +]) + + +AC_DEFUN([AC_FIND_BZIP2], +[ +AC_MSG_CHECKING([for bzDecompress in libbz2]) +AC_CACHE_VAL(ac_cv_lib_bzip2, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#define BZ_NO_STDIO +#include<bzlib.h> +], + [ bz_stream s; (void) bzDecompress(&s); ], + eval "ac_cv_lib_bzip2='-lbz2'", + eval "ac_cv_lib_bzip2=no") +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +AC_MSG_RESULT($ac_cv_lib_bzip2) + +if test ! "$ac_cv_lib_bzip2" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2" + AC_SUBST(LIBBZ2) + +else + + cxx_shared_flag= + ld_shared_flag= + KDE_CHECK_COMPILER_FLAG(shared, [ + ld_shared_flag="-shared" + ]) + KDE_CHECK_COMPILER_FLAG(fPIC, [ + cxx_shared_flag="-fPIC" + ]) + + AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) + AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_LIBS="$LIBS" + LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" + kde_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" + + AC_TRY_LINK(dnl + [ + #define BZ_NO_STDIO + #include<bzlib.h> + ], + [ bz_stream s; (void) BZ2_bzDecompress(&s); ], + eval "ac_cv_lib_bzip2_prefix='-lbz2'", + eval "ac_cv_lib_bzip2_prefix=no") + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + + AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) + + if test ! "$ac_cv_lib_bzip2_prefix" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2_prefix" + AC_SUBST(LIBBZ2) + + AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) + dnl else, we just ignore this + fi + +fi +AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the SSL headers and libraries. +dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) +dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([KDE_CHECK_SSL], +[ +LIBSSL="-lssl -lcrypto" +AC_REQUIRE([KDE_CHECK_LIB64]) + +ac_ssl_includes=NO ac_ssl_libraries=NO +ssl_libraries="" +ssl_includes="" +AC_ARG_WITH(ssl-dir, + AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), + [ ac_ssl_includes="$withval"/include + ac_ssl_libraries="$withval"/lib$kdelibsuff + ]) + +want_ssl=yes +AC_ARG_WITH(ssl, + AC_HELP_STRING([--without-ssl],[disable SSL checks]), + [want_ssl=$withval]) + +if test $want_ssl = yes; then + +AC_MSG_CHECKING(for OpenSSL) + +AC_CACHE_VAL(ac_cv_have_ssl, +[#try to guess OpenSSL locations + + ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" + ssl_incdirs="$ac_ssl_includes $ssl_incdirs" + AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) + ac_ssl_includes="$ssl_incdir" + + ssl_libdirs="/usr/lib$kdelibsuff /usr/local/lib$kdelibsuff /usr/ssl/lib$kdelibsuff /usr/local/ssl/lib$kdelibsuff $libdir $prefix/lib$kdelibsuff $exec_prefix/lib$kdelibsuff $kde_extra_libs" + if test ! "$ac_ssl_libraries" = "NO"; then + ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" + fi + + test=NONE + ssl_libdir=NONE + for dir in $ssl_libdirs; do + try="ls -1 $dir/libssl*" + if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done + + ac_ssl_libraries="$ssl_libdir" + + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" + LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" + + AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, + ac_ssl_rsaref="yes" + , + ac_ssl_rsaref="no" + ) + + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then + have_ssl=no + else + have_ssl=yes; + fi + + ]) + + eval "$ac_cv_have_ssl" + + AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) + + AC_MSG_CHECKING([whether OpenSSL uses rsaref]) + AC_MSG_RESULT($ac_ssl_rsaref) + + AC_MSG_CHECKING([for easter eggs]) + AC_MSG_RESULT([none found]) + +else + have_ssl=no +fi + +if test "$have_ssl" = yes; then + AC_MSG_CHECKING(for OpenSSL version) + dnl Check for SSL version + AC_CACHE_VAL(ac_cv_ssl_version, + [ + + cat >conftest.$ac_ext <<EOF +#include <openssl/opensslv.h> +#include <stdio.h> + int main() { + +#ifndef OPENSSL_VERSION_NUMBER + printf("ssl_version=\\"error\\"\n"); +#else + if (OPENSSL_VERSION_NUMBER < 0x00906000) + printf("ssl_version=\\"old\\"\n"); + else + printf("ssl_version=\\"ok\\"\n"); +#endif + return (0); + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + if test "$ac_ssl_includes" != "/usr/include"; then + CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" + fi + + if AC_TRY_EVAL(ac_link); then + + if eval `./conftest 2>&5`; then + if test $ssl_version = error; then + AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) + else + if test $ssl_version = old; then + AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) + have_ssl=no + fi + fi + ac_cv_ssl_version="ssl_version=$ssl_version" + else + AC_MSG_ERROR([Your system couldn't run a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure <faure@kde.org>, attaching your config.log]) + fi + + else + AC_MSG_ERROR([Your system couldn't link a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure <faure@kde.org>, attaching your config.log]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + ]) + + eval "$ac_cv_ssl_version" + AC_MSG_RESULT($ssl_version) +fi + +if test "$have_ssl" != yes; then + LIBSSL=""; +else + AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) + ac_cv_have_ssl="have_ssl=yes \ + ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" + + + ssl_libraries="$ac_ssl_libraries" + ssl_includes="$ac_ssl_includes" + + if test "$ac_ssl_rsaref" = yes; then + LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" + fi + + if test $ssl_version = "old"; then + AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) + fi +fi + +SSL_INCLUDES= + +if test "$ssl_includes" = "/usr/include"; then + if test -f /usr/kerberos/include/krb5.h; then + SSL_INCLUDES="-I/usr/kerberos/include" + fi +elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then + SSL_INCLUDES="-I$ssl_includes" +fi + +if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then + SSL_LDFLAGS="" +else + SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" +fi + +AC_SUBST(SSL_INCLUDES) +AC_SUBST(SSL_LDFLAGS) +AC_SUBST(LIBSSL) +]) + +AC_DEFUN([KDE_CHECK_STRLCPY], +[ + AC_REQUIRE([AC_CHECK_STRLCAT]) + AC_REQUIRE([AC_CHECK_STRLCPY]) + AC_CHECK_SIZEOF(size_t) + AC_CHECK_SIZEOF(unsigned long) + + AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) + AC_TRY_COMPILE(,[ + #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG + choke me + #endif + ],AC_MSG_RESULT([yes]),[ + AC_MSG_RESULT(no) + AC_MSG_ERROR([ + Apparently on your system our assumption sizeof size_t == sizeof unsigned long + does not apply. Please mail kde-devel@kde.org with a description of your system! + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_BINUTILS], +[ + AC_MSG_CHECKING([if ld supports unversioned version maps]) + + kde_save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + echo "{ local: extern \"C++\" { foo }; };" > conftest.map + AC_TRY_LINK([int foo;], +[ +#ifdef __INTEL_COMPILER +icc apparently does not support libtools version-info and version-script +at the same time. Dunno where the bug is, but until somebody figured out, +better disable the optional version scripts. +#endif + + foo = 42; +], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) + LDFLAGS="$kde_save_LDFLAGS" + rm -f conftest.map + AM_CONDITIONAL(include_VERSION_SCRIPT, + [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) + + AC_MSG_RESULT($kde_supports_versionmaps) +]) + +AC_DEFUN([AM_PROG_OBJC],[ +AC_CHECK_PROGS(OBJC, gcc, gcc) +test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) +if test "x${OBJCFLAGS-unset}" = xunset; then + OBJCFLAGS="-g -O2" +fi +AC_SUBST(OBJCFLAGS) +_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) +]) + +AC_DEFUN([KDE_CHECK_PERL], +[ + KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ + AC_MSG_ERROR([No Perl found in your $PATH. +We need perl to generate some code.]) + ]) + AC_SUBST(PERL) +]) + +AC_DEFUN([KDE_CHECK_LARGEFILE], +[ +AC_SYS_LARGEFILE +if test "$ac_cv_sys_file_offset_bits" != no; then + CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" +fi + +if test "x$ac_cv_sys_large_files" != "xno"; then + CPPFLAGS="$CPPFLAGS -D_LARGE_FILES=1" +fi + +]) + +dnl A small extension to PKG_CHECK_MODULES (defined in pkg.m4.in) +dnl which allows to search for libs that get installed into the KDE prefix. +dnl +dnl Syntax: KDE_PKG_CHECK_MODULES(KSTUFF, libkexif >= 0.2 glib = 1.3.4, action-if, action-not) +dnl defines KSTUFF_LIBS, KSTUFF_CFLAGS, see pkg-config man page +dnl also defines KSTUFF_PKG_ERRORS on error +AC_DEFUN([KDE_PKG_CHECK_MODULES], [ + + PKG_CONFIG_PATH="$prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" + if test "$prefix" != "$kde_libs_prefix"; then + PKG_CONFIG_PATH="$kde_libs_prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" + fi + export PKG_CONFIG_PATH + PKG_CHECK_MODULES([$1],[$2],[$3],[$4]) +]) + + +dnl Check for PIE support in the compiler and linker +AC_DEFUN([KDE_CHECK_PIE_SUPPORT], +[ + AC_CACHE_CHECK([for PIE support], kde_cv_val_pie_support, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIE" + LDFLAGS="$LDFLAGS -pie" + + AC_TRY_LINK([int foo;], [], [kde_cv_val_pie_support=yes], [kde_cv_val_pie_support=no]) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ]) + + AC_MSG_CHECKING(if enabling -pie/fPIE support) + + AC_ARG_ENABLE(pie, + AC_HELP_STRING([--enable-pie],[platform supports PIE linking [default=detect]]), + [kde_has_pie_support=$enableval], + [kde_has_pie_support=detect]) + + if test "$kde_has_pie_support" = "detect"; then + kde_has_pie_support=$kde_cv_val_pie_support + fi + + AC_MSG_RESULT([$kde_has_pie_support]) + + KDE_USE_FPIE="" + KDE_USE_PIE="" + + AC_SUBST([KDE_USE_FPIE]) + AC_SUBST([KDE_USE_PIE]) + + if test "$kde_has_pie_support" = "yes"; then + KDE_USE_FPIE="-fPIE" + KDE_USE_PIE="-pie" + fi +]) diff --git a/admin/am_edit b/admin/am_edit new file mode 100644 index 0000000..108eb67 --- /dev/null +++ b/admin/am_edit @@ -0,0 +1,2445 @@ +#!/usr/bin/perl -w + +# Expands the specialised KDE tags in Makefile.in to (hopefully) valid +# make syntax. +# When called without file parameters, we work recursively on all Makefile.in +# in and below the current subdirectory. When called with file parameters, +# only those Makefile.in are changed. +# The currently supported tags are +# +# {program}_METASOURCES +# where you have a choice of two styles +# {program}_METASOURCES = name1.moc name2.moc ... [\] +# {program}_METASOURCES = AUTO +# The second style requires other tags as well. +# +# To install icons : +# KDE_ICON = iconname iconname2 ... +# KDE_ICON = AUTO +# +# For documentation : +# http://developer.kde.org/documentation/other/developer-faq.html +# +# and more new tags TBD! +# +# The concept (and base code) for this program came from automoc, +# supplied by the following +# +# Matthias Ettrich <ettrich@kde.org> (The originator) +# Kalle Dalheimer <kalle@kde.org> (The original implementator) +# Harri Porten <porten@tu-harburg.de> +# Alex Zepeda <jazepeda@pacbell.net> +# David Faure <faure@kde.org> +# Stephan Kulow <coolo@kde.org> +# Dirk Mueller <mueller@kde.org> + +use Cwd; +use File::Find; +use File::Basename; + +# Prototype the functions +sub initialise (); +sub processMakefile ($); +sub updateMakefile (); +sub restoreMakefile (); + +sub removeLine ($$); +sub appendLines ($); +sub substituteLine ($$); + +sub findMocCandidates (); +sub pruneMocCandidates ($); +sub checkMocCandidates (); +sub addMocRules (); +sub findKcfgFile($); + +sub tag_AUTOMAKE (); +sub tag_META_INCLUDES (); +sub tag_METASOURCES (); +sub tag_POFILES (); +sub tag_DOCFILES (); +sub tag_LOCALINSTALL(); +sub tag_IDLFILES(); +sub tag_UIFILES(); +sub tag_KCFGFILES(); +sub tag_SUBDIRS(); +sub tag_ICON(); +sub tag_CLOSURE(); +sub tag_NO_UNDEFINED(); +sub tag_NMCHECK(); +sub tag_DIST(); +sub tag_KDEINIT(); + +# Some global globals... +$verbose = 0; # a debug flag +$thisProg = "$0"; # This programs name +$topdir = cwd(); # The current directory +@makefiles = (); # Contains all the files we'll process +@foreignfiles = (); +$start = (times)[0]; # some stats for testing - comment out for release +$version = "v0.2"; +$errorflag = 0; +$cppExt = "(cpp|cc|cxx|C|c\\+\\+)"; +$hExt = "(h|H|hh|hxx|hpp|h\\+\\+)"; +$progId = "KDE tags expanded automatically by " . basename($thisProg); +$automkCall = "\n"; +$printname = ""; # used to display the directory the Makefile is in +$use_final = 1; # create code for --enable-final +$cleantarget = "clean"; +$dryrun = 0; +$pathoption = 0; +$foreign_libtool = 0; + +while (defined ($ARGV[0])) +{ + $_ = shift; + if (/^--version$/) + { + print STDOUT "\n"; + print STDOUT basename($thisProg), " $version\n", + "This is really free software, unencumbered by the GPL.\n", + "You can do anything you like with it except sueing me.\n", + "Copyright 1998 Kalle Dalheimer <kalle\@kde.org>\n", + "Concept, design and unnecessary questions about perl\n", + " by Matthias Ettrich <ettrich\@kde.org>\n\n", + "Making it useful by Stephan Kulow <coolo\@kde.org> and\n", + "Harri Porten <porten\@kde.org>\n", + "Updated (Feb-1999), John Birch <jb.nz\@writeme.com>\n", + "Fixes and Improvements by Dirk Mueller <mueller\@kde.org>\n", + "Current Maintainer Stephan Kulow\n\n"; + exit 0; + } + elsif (/^--verbose$|^-v$/) + { + $verbose = 1; # Oh is there a problem...? + } + elsif (/^(?:-p|--path=)(.+)$/) + { + my $p = $1; + $thisProg = $p . "/". basename($thisProg); + warn ("$thisProg doesn't exist\n") if (!(-f $thisProg)); + $thisProg .= " -p".$p; + $pathoption=1; + } + elsif (/^--help$|^-h$/) + { + print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n", + "\n", + "Patches dir/Makefile.in generated by automake\n", + "(where dir can be an absolute or relative directory name)\n", + "\n", + " -v, --verbose verbosely list files processed\n", + " -h, --help print this help, then exit\n", + " --version print version number, then exit\n", + " -p, --path= use the path to am_edit if the path\n", + " called from is not the one to be used\n", + " --no-final don't patch for --enable-final\n"; + + exit 0; + } + elsif (/^--no-final$/) + { + $use_final = 0; + $thisProg .= " --no-final"; + } + elsif (/^--foreign-libtool$/) + { + $foreign_libtool = 1; + $thisProg .= " --foreign-libtool"; + } + elsif (/^-n$/) + { + $dryrun = 1; + } + else + { + # user selects what input files to check + # add full path if relative path is given + $_ = cwd()."/".$_ if (! /^\//); + print "User wants $_\n" if ($verbose); + push (@makefiles, $_); + } +} + +if ($thisProg =~ /^\// && !$pathoption ) +{ + print STDERR "Illegal full pathname call performed...\n", + "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n", + "Please use option --path.\n"; + exit 1; +} + +# Only scan for files when the user hasn't entered data +if (!@makefiles) +{ + print STDOUT "Scanning for Makefile.in\n" if ($verbose); + find (\&add_makefile, cwd()); + #chdir('$topdir'); +} else { + print STDOUT "Using input files specified by user\n" if ($verbose); +} + +foreach $makefile (sort(@makefiles)) +{ + processMakefile ($makefile); + last if ($errorflag); +} + +# Just some debug statistics - comment out for release as it uses printf. +printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start if ($verbose); + +exit $errorflag; # causes make to fail if erroflag is set + +#----------------------------------------------------------------------------- + +# In conjunction with the "find" call, this builds the list of input files +sub add_makefile () +{ + push (@makefiles, $File::Find::name) if (/Makefile.in$/); +} + +#----------------------------------------------------------------------------- + +# Processes a single make file +# The parameter contains the full path name of the Makefile.in to use +sub processMakefile ($) +{ + # some useful globals for the subroutines called here + local ($makefile) = @_; + local @headerdirs = ('.'); + local $haveAutomocTag = 0; + local $MakefileData = ""; + + local $cxxsuffix = "KKK"; + + local @programs = (); # lists the names of programs and libraries + local $program = ""; + + local @kdeinits = (); # lists the kdeinit targets + + local %realObjs = (); # lists the objects compiled into $program + local %sources = (); # lists the sources used for $program + local %finalObjs = (); # lists the objects compiled when final + local %realname = (); # the binary name of program variable + local %idlfiles = (); # lists the idl files used for $program + local %globalmocs = ();# list of all mocfiles (in %mocFiles format) + local %important = (); # list of files to be generated asap + local %uiFiles = (); + local %kcfgFiles = (); + + local $allidls = ""; + local $idl_output = "";# lists all idl generated files for cleantarget + local $ui_output = "";# lists all uic generated files for cleantarget + local $kcfg_output = "";# lists all kcfg generated files for cleantarget + + local %dependmocs = (); + + local $metasourceTags = 0; + local $dep_files = ""; + local $dep_finals = ""; + local %target_adds = (); # the targets to add + local %rule_adds = (); + local $kdelang = ""; + local @cleanfiles = (); + local $cleanMoc = ""; + local $closure_output = ""; + + local %varcontent = (); + + $makefileDir = dirname($makefile); + chdir ($makefileDir); + $printname = $makefile; + $printname =~ s/^\Q$topdir\E\///; + $makefile = basename($makefile); + + print STDOUT "Processing makefile $printname\n" if ($verbose); + + # Setup and see if we need to do this. + return if (!initialise()); + + tag_AUTOMAKE (); # Allows a "make" to redo the Makefile.in + tag_META_INCLUDES (); # Supplies directories for src locations + + foreach $program (@programs) { + $sources_changed{$program} = 0; + $dependmocs{$program} = ""; + $important{$program} = ""; + tag_IDLFILES(); # Sorts out idl rules + tag_NO_UNDEFINED(); + tag_CLOSURE(); + tag_NMCHECK(); + tag_UIFILES(); # Sorts out ui rules + tag_KCFGFILES(); # Sorts out kcfg rules + tag_METASOURCES (); # Sorts out the moc rules + if ($sources_changed{$program}) { + my $lookup = $program . '_SOURCES\s*=[ \t]*(.*)'; + + if($program =~ /libkdeinit_(.*)/) { + my $prog = $1; + substituteLine($prog . '_SOURCES\s*=[ \t]*(.*)', + "${prog}_SOURCES = ${prog}_dummy.$cxxsuffix\n" . + "libkdeinit_${prog}_SOURCES = " . $sources{$program}); + $sources{$prog} = "${prog}_dummy.$cxxsuffix"; + } + else { + substituteLine($lookup, "$program\_SOURCES=" . $sources{$program}); + } + } + if ($important{$program}) { + local %source_dict = (); + for $source (split(/[\034\s]+/, $sources{$program})) { + $source_dict{$source} = 1; + } + for $source (@cleanfiles) { + $source_dict{$source} = 0; + } + for $source (keys %source_dict) { + next if (!$source); + if ($source_dict{$source}) { + # sanity check + if (! -f $source) { + print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n"; + } else { + $target_adds{"\$(srcdir)/$source"} .= $important{$program}; + } + } + } + } + } + if ($cleanMoc) { + # Always add dist clean tag + # Add extra *.moc.cpp files created for USE_AUTOMOC because they + # aren't included in the normal *.moc clean rules. + appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources "; + } + + tag_DIST() unless ($kdeopts{"noautodist"}); + + if ($idl_output) { + appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-idl "; + } + + if ($ui_output) { + appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-ui "; + } + + if ($kcfg_output) { + appendLines ("$cleantarget-kcfg:\n\t-rm -f $kcfg_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-kcfg "; + } + + if ($closure_output) { + appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-closures "; + } + + if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) { + $kdelang = '$(KDE_LANG)' + } else { + $kdelang = ''; + } + + tag_POFILES (); # language rules for po directory + tag_DOCFILES (); # language rules for doc directories + tag_LOCALINSTALL(); # add $(DESTDIR) before all kde_ dirs + tag_ICON(); + tag_SUBDIRS(); + + my $tmp = "force-reedit:\n"; + $tmp .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n"; + appendLines($tmp); + + make_bcheck_target(); + make_meta_classes(); + tag_COMPILE_FIRST(); + tag_FINAL() if (!$kdeopts{"nofinal"}); + + my $final_lines = "final:\n\t\$(MAKE) "; + my $final_install_lines = "final-install:\n\t\$(MAKE) "; + my $nofinal_lines = "no-final:\n\t\$(MAKE) "; + my $nofinal_install_lines = "no-final-install:\n\t\$(MAKE) "; + + foreach $program (@programs) { + my $lookup = $program . '_OBJECTS\s*=[ \t]*.*'; + my $new = ""; + my @list = split(/[\034\s]+/, $realObjs{$program}); + if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) { + $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program}; + $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program}; + $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)"; + $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)"; + + $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; + $final_install_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; + $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" "; + $nofinal_install_lines .= "$program\_OBJECTS=\"\$($program\_nofinal_OBJECTS)\" "; + } else { + $new = "$program\_OBJECTS = " . $realObjs{$program}; + } + if($MakefileData =~ m/\n$lookup/) { + substituteLine ($lookup, $new); + } + else { + appendLines("$new\n"); + } + } + appendLines($final_lines . "all-am\n"); + appendLines($final_install_lines . "install-am\n"); + appendLines($nofinal_lines . "all-am\n"); + appendLines($nofinal_install_lines . "install-am\n"); + + my $lookup = '(\@\S+\@)?DEP_FILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + my $condition = $1; + my $depfiles = $2; + my $workfiles; + + if ($dep_finals) { + # Add the conditions on every line, since + # there may be line continuations in the list. + $workfiles = "$dep_files $dep_finals $depfiles"; + $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_TRUE\@\t/g; + $lines = "$condition\@KDE_USE_FINAL_TRUE\@DEP_FILES = $workfiles\n"; + $workfiles = "$dep_files $depfiles"; + $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_FALSE\@\t/g; + $lines .= "$condition\@KDE_USE_FINAL_FALSE\@DEP_FILES = $workfiles"; + } else { + $workfiles = "$dep_files $depfiles"; + $workfiles =~ s/\034/\034$condition\t/g; + $lines = $condition . "DEP_FILES = $workfiles"; + } + substituteLine($lookup, $lines); + } + + # new recursive targets + $target_adds{ "nmcheck" } .= ""; # always create nmcheck target + $target_adds{ "nmcheck-am" } .= "nmcheck"; + $lookup = 'RECURSIVE_TARGETS\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "RECURSIVE_TARGETS = $1 nmcheck-recursive bcheck-recursive"); + } + + $cvs_lines = "kde-rpo-clean:\n"; + $cvs_lines .= "\t-rm -f *.rpo\n"; + appendLines($cvs_lines); + $target_adds{"clean"} .= "kde-rpo-clean "; + + my %target_dels = ("install-data-am" => ""); + + # some strange people like to do a install-exec, and expect that also + # all modules are installed. automake doesn't know this, so we need to move + # this here from install-data to install-exec. + if ($MakefileData =~ m/\nkde_module_LTLIBRARIES\s*=/) { +# $target_adds{"install-exec-am"} .= "install-kde_moduleLTLIBRARIES "; +# don't use $target_adds here because we need to append the dependency, not +# prepend it. Fixes #44342 , when a module depends on a lib in the same dir +# and libtool needs it during relinking upon install (Simon) + my $lookup = "install-exec-am:([^\n]*)"; + if($MakefileData =~ /\n$lookup\n/) { + substituteLine("$lookup", "install-exec-am: $1 install-kde_moduleLTLIBRARIES"); + } + $target_dels{"install-data-am"} .= "install-kde_moduleLTLIBRARIES "; + $target_adds{"install-data-am"} .= " "; + } + + my $lines = ""; + + foreach $add (keys %target_adds) { + my $lookup = quotemeta($add) . ':([^\n]*)'; + if ($MakefileData =~ /\n$lookup\n/) { + my $newlines = $1; + my $oldlines = $lookup; + if (defined $target_dels{$add}) { + foreach $del (split(' ', $target_dels{$add})) { + $newlines =~ s/\s*$del\s*/ /g; + } + } + substituteLine($oldlines, "$add: " . $target_adds{$add} . $newlines); + } else { + $lines .= "$add: " . $target_adds{$add} . "\n"; + } + } + + appendLines($lines) if ($lines); + + $lines = join("\n", values %rule_adds); + appendLines($lines) if ($lines); + + my $found = 1; + + while ($found) { + if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) { + my $stuff_before = $1; + my $stuff_after = $2; + my $lookup = quotemeta("$1\$(CXXFLAGS)$2"); + my $replacement = "$1\$(KCXXFLAGS)$2"; + $MakefileData =~ s/$lookup/$replacement/; + $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/; + $replacement = "$stuff_before\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$stuff_after"; + next if ($stuff_before =~ /\$\(KDE_CXXFLAGS\)/ or $stuff_after =~ /\$\(KDE_CXXFLAGS\)/); + substituteLine($lookup, $replacement); + } else { + $found = 0; + } + } + + if($foreign_libtool == 0) { + $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))'; + + if ($MakefileData =~ m/$lookup/ ) { + $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; + } + + $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile)\s+(\$\(CXX\)\s+)'; + if ($MakefileData =~ m/$lookup/ ) { + $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; + } + } + + $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g; + + $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)'; + if ($MakefileData =~ m/\n$lookup\n/) { + substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2"); + } + + # Always update the Makefile.in + updateMakefile (); + return; +} + +#----------------------------------------------------------------------------- + +# Beware: This procedure is not complete. E.g. it also parses lines +# containing a '=' in rules (for instance setting shell vars). For our +# usage this us enough, though. +sub read_variables () +{ + while ($MakefileData =~ /\n\s*(\S+)\s*=([^\n]*)/g) { + $varcontent{$1} = $2; + } +} + +# Check to see whether we should process this make file. +# This is where we look for tags that we need to process. +# A small amount of initialising on the tags is also done here. +# And of course we open and/or create the needed make files. +sub initialise () +{ + if (! -r "Makefile.am") { + print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose); + return 0; + } + + # Checking for files to process... + + open (FILEIN, $makefile) || die "Can't open $makefileDir/$makefile: $!\n"; + # perl bug in 5.8.0: in utf8 mode it badly screws up + binmode(FILEIN, ":bytes") if ($] >= 5.008); + # Read the file + # stat(FILEIN)[7] might look more elegant, but is slower as it + # requires stat'ing the file + seek(FILEIN, 0, 2); + my $fsize = tell(FILEIN); + seek(FILEIN, 0, 0); + read FILEIN, $MakefileData, $fsize; + close FILEIN; + print "DOS CRLF within $makefileDir/$makefile!\n" if($MakefileData =~ y/\r//d); + + # Remove the line continuations, but keep them marked + # Note: we lose the trailing spaces but that's ok. + # Don't mangle line-leading spaces (usually tabs) + # since they're important. + $MakefileData =~ s/\\\s*\n/\034/g; + + # If we've processed the file before... + restoreMakefile () if ($MakefileData =~ /$progId/); + + foreach $dir (@foreignfiles) { + if (substr($makefileDir,0,length($dir)) eq $dir) { + return 0; + } + } + + %kdeopts = (); + $kdeopts{"foreign"} = 0; + $kdeopts{"qtonly"} = 0; + $kdeopts{"noautodist"} = 0; + $kdeopts{"foreign-libtool"} = $foreign_libtool; + $kdeopts{"nofinal"} = !$use_final; # default + + read_variables(); + + if ($MakefileData =~ /\nKDE_OPTIONS\s*=[ \t]*([^\n]*)\n/) { + my $kde_options_str = $1; + local @kde_options = split(/[\034\s]+/, $kde_options_str); + if (grep(/^foreign$/, @kde_options)) { + push(@foreignfiles, $makefileDir . "/"); + return 0; # don't touch me + } + for $opt (@kde_options) { + if (!defined $kdeopts{$opt}) { + print STDERR "Warning: unknown option $opt in $printname\n"; + } else { + $kdeopts{$opt} = 1; + } + } + } + + # Look for the tags that mean we should process this file. + $metasourceTags = 0; + $metasourceTags++ while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g); + + my $pofileTag = 0; + $pofileTag++ while ($MakefileData =~ /\nPOFILES\s*=/g); + if ($pofileTag > 1) + { + print STDERR "Error: Only one POFILES tag allowed\n"; + $errorflag = 1; + } + + while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) { + my $suffixes_str = $1; + my @list=split(' ', $suffixes_str); + foreach $ext (@list) { + if ($ext =~ /^\.$cppExt$/) { + $cxxsuffix = $ext; + $cxxsuffix =~ s/\.//g; + print STDOUT "will use suffix $cxxsuffix\n" if ($verbose); + last; + } + } + } + + tag_KDEINIT(); + + while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[\034 \t]*([^\n]*)\n/g) { + + my $program = $1; + my $objs = $2; # safe them + + my $ocv = 0; + + my @objlist = split(/[\034\s]+/, $objs); + foreach $obj (@objlist) { + if ($obj =~ /(\S*)\$\((\S+)\)/ ) { + my $pre = $1; + my $variable = $2; + if ($pre eq '' && exists($varcontent{$variable})) { + my @addlist = split(/[\034\s]+/, $varcontent{$variable}); + push(@objlist, @addlist); + } elsif ($variable !~ 'OBJEXT' && $variable !~ /am__objects_\d+/ ) { + $ocv = 1; + } + } + } + + next if ($ocv); + next if ($program =~ /^am_libkdeinit_/); + + $program =~ s/^am_// if ($program =~ /^am_/); + + my $sourceprogram = $program; + $sourceprogram =~ s/\@am_/\@/ if($sourceprogram =~ /^.*\@am_.+/); + + print STDOUT "found program $program\n" if ($verbose); + push(@programs, $program); + + $realObjs{$program} = $objs; + + if ($MakefileData =~ /\n$sourceprogram\_SOURCES\s*=[ \t]*(.*)\n/) { + $sources{$program} = $1; + } + else { + $sources{$program} = ""; + print STDERR "found program with no _SOURCES: $program\n"; + } + + my $realprogram = $program; + $realprogram =~ s/_/./g; # unmask to regexp + if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) { + $realname{$program} = $1; + } else { + # not standard Makefile - nothing to worry about + $realname{$program} = ""; + } + } + + my $lookup = 'DEPDIR\s*=.*'; + if ($MakefileData !~ /\n$lookup/) { + $lookup = 'bindir\s*=[ \t]*.*'; + substituteLine($lookup, "DEPDIR = .deps\n$1") if ($MakefileData =~ /\n($lookup)/); + } + + my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES'); + foreach $mark (@marks) { + while ($MakefileData =~ /\n($mark)\s*=[ \t]*([^\n]*)/g) { + my $clean_str = $2; + foreach $file (split('[\034\s]+', $clean_str)) { + $file =~ s/\.\///; + push(@cleanfiles, $file); + } + } + } + + my $localTag = 0; + $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/); + + return (!$errorflag); +} + +#----------------------------------------------------------------------------- + +# Gets the list of user defined directories - relative to $srcdir - where +# header files could be located. +sub tag_META_INCLUDES () +{ + my $lookup = '[^=\n]*META_INCLUDES\s*=[ \t]*(.*)'; + return 1 if ($MakefileData !~ /($lookup)\n/); + print STDOUT "META_INCLUDE processing <$1>\n" if ($verbose); + + my $headerStr = $2; + removeLine ($lookup, $1); + + my @headerlist = split(/[\034\s]+/, $headerStr); + + foreach $dir (@headerlist) + { + $dir =~ s#\$\(srcdir\)#.#; + if (! -d $dir) + { + print STDERR "Warning: $dir can't be found. ", + "Must be a relative path to \$(srcdir)\n"; + } + else + { + push (@headerdirs, $dir); + } + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub tag_FINAL() +{ + my @final_names = (); + + foreach $program (@programs) { + + if ($sources{$program} =~ /\(/) { + print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose); + next; + } + + my $mocs = ""; # Moc files (in this program) + my $moc_cpp_added = 0; # If we added some .moc.cpp files, due to + # no other .cpp file including the .moc one. + + my @progsources = split(/[\034\s]+/, $sources{$program}); + my %shash = (); + @shash{@progsources} = 1; # we are only interested in the existence + my %sourcelist = (); + my %extradeps = (); + + foreach $source (@progsources) { + my $suffix = $source; + $suffix =~ s/^.*\.([^\.]+)$/$1/; + + $sourcelist{$suffix} .= "$source "; + } + foreach my $mocFile (keys (%globalmocs)) + { + my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); + if (defined ($cppFile)) { + $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; + } else { + $sourcelist{$cxxsuffix} .= "$mocFile.moc.$cxxsuffix "; + $moc_cpp_added = 1; + } + } + + # scan for extra given dependencies and add them to our target + while ($MakefileData =~ /\n\s*(\S+)\.(?:lo|o)\s*:([^\n]*)/g) { + $extradeps{$1} = $2; + } + + foreach $suffix (keys %sourcelist) { + # See if this file contains c++ code. (i.e., just check the file's suffix against c++ extensions) + my $suffix_is_cxx = 0; + if($suffix =~ /($cppExt)$/) { + $cxxsuffix = $1; + $suffix_is_cxx = 1; + } + + my $mocfiles_in = ($suffix eq $cxxsuffix) && $moc_cpp_added; + + my @sourcelist = split(/[\034\s]+/, $sourcelist{$suffix}); + + if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) { + + # we support IDL on our own + if ($suffix eq "skel" || $suffix =~ /^stub/ + || $suffix =~ /^signals/ # obsolete, remove in KDE-4 + || $suffix eq "h" || $suffix eq "ui" + || $suffix eq "kcfgc" ) { + next; + } + + foreach $file (@sourcelist) { + $file =~ s/\Q$suffix\E$//; + + $finalObjs{$program} .= $file; + if ($program =~ /_la$/) { + $finalObjs{$program} .= "lo "; + } else { + $finalObjs{$program} .= "o "; + } + } + next; # suffix + } + + my $source_deps = ""; + foreach $source (@sourcelist) { + if (-f $source) { + $source_deps .= " \$(srcdir)/$source"; + } else { + $source_deps .= " $source"; + } + my $plainsource = $source; + $plainsource =~ s/\.$cppExt$//; + $source_deps .= " " . $extradeps{$plainsource} if (exists($extradeps{$plainsource})); + } + + $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in" . $source_deps . " " . join(' ', $mocs) . "\n"; + $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n"; + $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n"; + $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n"; + $handling .= "\tfor file in " . $sourcelist{$suffix} . "; do \\\n"; + $handling .= "\t echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n"; + $handling .= "\t test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n"; + $handling .= "\tdone; \\\n"; + $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files > $program.all_$suffix.$suffix; \\\n"; + $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n"; + + appendLines($handling); + + push(@final_names, "$program.all_$suffix.$suffix"); + my $finalObj = "$program.all_$suffix."; + if ($program =~ /_la$/) { + $finalObj .= "lo"; + } else { + $finalObj .= "o"; + } + $finalObjs{$program} .= $finalObj . " "; + } + } + + if (!$kdeopts{"nofinal"} && @final_names >= 1) { + # add clean-final target + my $lines = "$cleantarget-final:\n"; + $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names); + appendLines($lines); + $target_adds{"$cleantarget-am"} .= "$cleantarget-final "; + + foreach $finalfile (@final_names) { + $finalfile =~ s/\.[^.]*$/.P/; + $dep_finals .= " \$(DEPDIR)/$finalfile"; + } + } +} + +sub tag_KDEINIT() +{ + my @progs = (); + my $ltlibs = ""; + my $lookup = 'kdeinit_LTLIBRARIES\s*=[ \t]*(.*)'; + + if ($MakefileData =~ m/\n$lookup/) { + @kdeinits = split(/[\034\s]+/, $1); + my $lines = ""; + foreach my $kdeinit (@kdeinits) { + if ($kdeinit =~ m/\.la$/) { + $kdeinit =~ s/\.la$//; + push(@progs, $kdeinit); + + $lines .= "\n${kdeinit}.la.$cxxsuffix:\n"; + $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' > ${kdeinit}.la.$cxxsuffix; \\\n"; + $lines .= "\techo 'int main(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}.la.$cxxsuffix\n"; + + $lines .= "\n${kdeinit}_dummy.$cxxsuffix:\n"; + $lines .= "\techo '#include <kdemacros.h>' > ${kdeinit}_dummy.$cxxsuffix; \\\n"; + $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' >> ${kdeinit}_dummy.$cxxsuffix; \\\n"; + $lines .= "\techo 'extern \"C\" KDE_EXPORT int kdeinitmain(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}_dummy.$cxxsuffix\n"; + + push(@cleanfiles, "${kdeinit}.la.$cxxsuffix"); + push(@cleanfiles, "${kdeinit}_dummy.$cxxsuffix"); + + # add dependency + $dep_files .= " \$(DEPDIR)/${kdeinit}.la.Po" if($dep_files !~/${kdeinit}.la.Po/ ); + $dep_files .= " \$(DEPDIR)/${kdeinit}_dummy.Plo" if($dep_files !~/${kdeinit}_dummy.Plo/ ); + + # make library + $lookup = $kdeinit . '_la_LIBADD\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libadd = $1; + substituteLine($lookup, "${kdeinit}_la_LIBADD = libkdeinit_${kdeinit}.la"); + appendLines("libkdeinit_${kdeinit}_la_LIBADD = $libadd\n"); + } + appendLines("libkdeinit_${kdeinit}_la_LDFLAGS = -no-undefined -avoid-version \$(all_libraries)\n"); + + # add library dependencies + $lookup = $kdeinit . '_la_DEPENDENCIES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libdeps = $1; + substituteLine($lookup, "${kdeinit}_la_DEPENDENCIES = libkdeinit_${kdeinit}.la"); + appendLines("libkdeinit_${kdeinit}_la_DEPENDENCIES = $libdeps\n"); + } + + # make library objects + $lookup = "am_${kdeinit}_la_OBJECTS" . '\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libobjects = $1; + substituteLine($lookup, "am_${kdeinit}_la_OBJECTS = ${kdeinit}_dummy.lo"); + appendLines("am_libkdeinit_${kdeinit}_la_OBJECTS = $libobjects\n"); + my $prog = "libkdeinit_${kdeinit}_la"; + push(@programs, $prog); + $realObjs{$prog} = $libobjects; + $realname{$prog} = "libkdeinit_${kdeinit}.la"; + } + $target_adds{"libkdeinit_${kdeinit}.la"} = "\$(libkdeinit_${kdeinit}_la_OBJECTS) \$(libkdeinit_${kdeinit}_la_DEPENDENCIES)\n" . + "\t\$(CXXLINK) -rpath \$(libdir) \$(libkdeinit_${kdeinit}_la_LDFLAGS) ". + "\$(libkdeinit_${kdeinit}_la_OBJECTS) " . + "\$(libkdeinit_${kdeinit}_la_LIBADD) " . + "\$(LIBS)\n"; + + # make libkdeinit sources + $lookup = $kdeinit . '_la_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $sources_changed{"libkdeinit_${kdeinit}_la"} = 1; + $sources{"libkdeinit_${kdeinit}_la"} = $srces; + } + + # make libkdeinit metasources + $lookup = $kdeinit . '_la_METASOURCES\s*=[ \t]*(.*)'; + substituteLine($lookup, "libkdeinit_${kdeinit}_la_METASOURCES = $1") + if($MakefileData =~ m/\n$lookup/); + +=cut + # make binary sources + $lookup = $kdeinit. '_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + substituteLine($lookup, "${kdeinit}_SOURCES = ${kdeinit}.la.$cxxsuffix"); + $lookup = 'SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $srces =~ s/\b$kdeinit\.c\b/\$(${kdeinit}_SOURCES)/; + $srces =~ s/\$\(${kdeinit}_la_SOURCES\)/\$(libkdeinit_${kdeinit}_la_SOURCES)/; + substituteLine($lookup, "SOURCES = $srces"); + } + $lookup = 'DIST_SOURCES\s*=[ \t](.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $srces =~ s/\b$kdeinit\.c\b/\$(${kdeinit}_SOURCES)/; + $srces =~ s/\$\(${kdeinit}_la_SOURCES\)/\$(libkdeinit_${kdeinit}_la_SOURCES)/; + substituteLine($lookup, "DIST_SOURCES = $srces"); + } + } + + # make binary objects / libs + $lookup = $kdeinit . '_OBJECTS\s*=[ \t]*.*'; + if($MakefileData =~ m/\n$lookup/) { + $realObjs{$kdeinit} = "${kdeinit}.la.\$(OBJEXT)"; + substituteLine("${kdeinit}_LDFLAGS\\s*=.*", "${kdeinit}_LDFLAGS = \$(all_libraries)"); + substituteLine("${kdeinit}_LDADD\\s*=.*", "${kdeinit}_LDADD = libkdeinit_${kdeinit}.la"); + substituteLine("${kdeinit}_DEPENDENCIES\\s*=.*", "${kdeinit}_DEPENDENCIES = libkdeinit_${kdeinit}.la"); + } +=cut + # add binary + push(@programs, $kdeinit); + $realObjs{$kdeinit} = "${kdeinit}.la.\$(OBJEXT)"; + $realname{$kdeinit} = $kdeinit; + $sources{$kdeinit} = "${kdeinit}.la.$cxxsuffix"; + + $lines .= "${kdeinit}_LDFLAGS = \$(KDE_RPATH) -no-undefined \$(all_libraries)\n"; + $lines .= "${kdeinit}_LDADD = libkdeinit_${kdeinit}.la\n"; + $lines .= "${kdeinit}_DEPENDENCIES = libkdeinit_${kdeinit}.la\n"; + + $target_adds{"${kdeinit}\$(EXEEXT)"} = + "\$(${kdeinit}_OBJECTS) \$(${kdeinit}_DEPENDENCIES)\n" . + "\t\@rm -f ${kdeinit}\$(EXEEXT)\n" . + "\t\$(CXXLINK) \$(${kdeinit}_LDFLAGS) \$(${kdeinit}_OBJECTS) \$(${kdeinit}_LDADD) \$(LIBS)\n"; + + $ltlibs .= " libkdeinit_${kdeinit}.la"; + } + } + appendLines($lines); + + # add libkdeinit target + $lookup = 'lib_LTLIBRARIES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + substituteLine($lookup, "lib_LTLIBRARIES = $1 $ltlibs"); + } + else { + print STDERR + "Error: lib_LTLIBRARIES missing in $printname (required for kdeinit_LTLIBRARIES).\n"; + $errorflag = 1; + } + } + + if($#progs >= 0) { + if($MakefileData !~ m/\nbin_PROGRAMS\s*=/) { + print STDERR "Error: bin_PROGRAMS missing in $printname (required for kdeinit_LTLIBRARIES).\n"; + $errorflag = 1; + } + else { + # add our new progs to SOURCES, DIST_SOURCES and bin_PROGRAMS + my $progsources = ""; + my $progexes = ""; + foreach my $p (@progs) { + $progsources .= "\$(${p}_SOURCES) "; + $progexes .= "${p}\$(EXEEXT) "; + } + $lookup = 'SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "SOURCES = $1 $progsources"); + } + $lookup = 'DIST_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "DIST_SOURCES = $1 $progsources"); + } + # bin_PROGRAMS is complicated, as it exists twice, so we do a little + # magic trick here + $lookup = 'PROGRAMS\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "bin_PROGRAMS += $progexes\nPROGRAMS = $1"); + } + } + } +} + +#----------------------------------------------------------------------------- + +sub tag_COMPILE_FIRST() +{ + foreach $program (@programs) { + my $lookup = "$program" . '_COMPILE_FIRST\s*=[ \t]*(.*)'; + if ($MakefileData =~ m/\n$lookup\n/) { + my $compilefirst_str = $1; + my @compilefirst = split(/[\034\s]+/, $compilefirst_str); + my @progsources = split(/[\034\s]+/, $sources{$program}); + my %donesources = (); + foreach $source (@progsources) { + my @deps = (); + my $sdeps = ""; + if (-f $source) { + $sdeps = "\$(srcdir)/$source"; + } else { + $sdeps = "$source"; + } + foreach $depend (@compilefirst) { + next if ($source eq $depend); + # avoid cyclic dependencies + next if defined($donesources{$depend}); + push @deps, $depend; + } + $target_adds{$sdeps} .= join(' ', @deps) . ' ' if (@deps); + $donesources{$source} = 1; + } + } + } +} + +#----------------------------------------------------------------------------- + + +# Organises the list of headers that we'll use to produce moc files +# from. +sub tag_METASOURCES () +{ + local @newObs = (); # here we add to create object files + local @depend = (); # here we add to create moc files + local $mocExt = ".moc"; + local %mocFiles = (); + + my $line = ""; + my $postEqual = ""; + + my $lookup; + my $found = ""; + if ($metasourceTags > 1) { + $lookup = $program . '_METASOURCES\s*=\s*(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + $found = $1; + } else { + $lookup = $program . '_METASOURCES\s*=\s*(.*)'; + if ($MakefileData !~ /\n($lookup)\n/) { + $lookup = 'METASOURCES\s*=\s*(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + $found = $1; + $metasourceTags = 0; # we can use the general target only once + } else { + $found = $1; + } + } + print STDOUT "METASOURCE processing <$found>)\n" if ($verbose); + + $postEqual = $found; + $postEqual =~ s/[^=]*=//; + + removeLine ($lookup, $found); + + # Always find the header files that could be used to "moc" + return 1 if (findMocCandidates ()); + + if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/) + { + print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+); + $mocExt = ".moc.$cxxsuffix"; + $haveAutomocTag = 1; + } + else + { + # Not automoc so read the list of files supplied which + # should be .moc files. + + $postEqual =~ tr/\034/ /; + + # prune out extra headers - This also checks to make sure that + # the list is valid. + pruneMocCandidates ($postEqual); + } + + checkMocCandidates (); + + if (@newObs) { + my $ext = ($program =~ /_la$/) ? ".moc.lo " : ".moc.o "; + $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext; + $dependmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix"; + foreach $file (@newObs) { + $dep_files .= " \$(DEPDIR)/$file.moc.P" if($dep_files !~/$file.moc.P/); + } + } + if (@depend) { + $dependmocs{$program} .= " "; + $dependmocs{$program} .= join('.moc ', @depend) . ".moc"; + $dependmocs{$program} .= " "; + } + addMocRules (); + @globalmocs{keys %mocFiles}=values %mocFiles; +} + +#----------------------------------------------------------------------------- + +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_AUTOMAKE () +{ + my $lookup = '.*cd \$\(top_srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\)(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + print STDOUT "AUTOMAKE processing <$1>\n" if ($verbose); + + my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname"; + + # automake 1.8.x adds another automake call. *sigh* + $newLine =~ s/;([\034\s]+cd\s+\$\(srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\).*)[\034\s]+\&\&[\034\s]+exit[\034\s]+0;([\034\s]+exit\s+1)/; \034 ( $1 ) || exit 1; echo \' cd \$(top_srcdir) && perl $thisProg \'; cd \$(top_srcdir) && perl $thisProg && exit 0; $2/; + substituteLine ($lookup, $newLine); + $automkCall = $1; + + $lookup = '.*cd \$\(srcdir\)\s+&&[\034\s]+\$\(AUTOCONF\)(.*)'; + if ($MakefileData =~ /\n($lookup)\n/) { + $newLine = "\tcd \$(srcdir) && rm -f configure\n"; + $newLine .= "\tcd \$(top_srcdir) && \$(MAKE) -f admin/Makefile.common configure"; + substituteLine ($lookup, $newLine); + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub handle_TOPLEVEL() +{ + my $pofiles = ""; + my @restfiles = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if (-d $entry); + + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/); + + if ($entry =~ /\.po$/) { + next; + } + push(@restfiles, $entry); + } + closedir (THISDIR); + + if (@restfiles) { + $target_adds{"install-data-am"} .= "install-nls-files "; + $lines = "install-nls-files:\n"; + $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$kdelang\n"; + for $file (@restfiles) { + $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; + } + $target_adds{"uninstall"} .= "uninstall-nls-files "; + $lines .= "uninstall-nls-files:\n"; + for $file (@restfiles) { + $lines .= "\t-rm -f \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; + } + appendLines($lines); + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub tag_SUBDIRS () +{ + if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) { + return 1; + } + + my $subdirs = "."; + + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./); + if (-d $entry && -f $entry . "/Makefile.am") { + $subdirs .= " $entry"; + next; + } + } + closedir (THISDIR); + + substituteLine('SUBDIRS\s*=.*', "SUBDIRS =$subdirs"); + return 0; +} + +sub tag_IDLFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my $dep_lines = ""; + my @cppFiles = (); + + foreach $source (@psources) { + my $skel = ($source =~ m/\.skel$/); + my $stub = ($source =~ m/\.stub$/); + my $signals = ($source =~ m/\.signals$/); # obsolete, remove in KDE-4 + + if ($stub || $skel || $signals) { + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.(stub|skel|signals)$//; + my $sourcename; + + if ($skel) { + $sourcename = "$source\_skel"; + } elsif ($stub) { + $sourcename = "$source\_stub"; + } else { + $sourcename = "$source\_signals"; + } + + my $sourcedir = ''; + if (-f "$makefileDir/$source.h") { + $sourcedir = '$(srcdir)/'; + } else { + if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) { + $sourcedir = $1; + $sourcedir .= "/" if ($sourcedir !~ /\/$/); + } + } + + if ($allidls !~ /$source\_kidl/) { + + $use_ng = ($MakefileData =~ /\n$source\_DCOPIDLNG\s*=\s*(\S+)\n/); + $dcopidl = $use_ng ? "KDECONFIG=\"\$(KDECONFIG)\" \$(DCOPIDLNG)" : "\$(DCOPIDL)"; + + $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOP_DEPENDENCIES)\n"; + $dep_lines .= "\t$dcopidl $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; false )\n"; + + $allidls .= $source . "_kidl "; + } + + if ($allidls !~ /$sourcename/) { + + $dep_lines_tmp = ""; + + if ($skel) { + $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n"; + $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-stub $source.kidl\n"; + } elsif ($stub) { + $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-skel $source.kidl\n"; + } else { # signals - obsolete, remove in KDE 4 + $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub --no-skel $source.kidl\n"; + } + + if ($stub || $signals) { + $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h "; + $dep_lines .= "$sourcename.h: $source.kidl\n"; + $dep_lines .= $dep_lines_tmp; + } + + $allidls .= $sourcename . " "; + } + + $idlfiles{$program} .= $sourcename . " "; + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $sourcename.lo"; + } else { + $realObjs{$program} .= " $sourcename.\$(OBJEXT)"; + } + $sources{$program} .= " $sourcename.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$sourcename.h " if (!$skel); + $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl "; + push(@cleanfiles, "$sourcename.$cxxsuffix"); + push(@cleanfiles, "$sourcename.h"); + push(@cleanfiles, "$sourcename.kidl"); + $dep_files .= " \$(DEPDIR)/$sourcename.P" if ($dep_files !~/$sourcename.P/); + } + } + if ($dep_lines) { + appendLines($dep_lines); + } + + if (0) { + my $lookup = "($program)"; + $lookup .= '(|\$\(EXEEXT\))'; + $lookup =~ s/\_/./g; + $lookup .= ":(.*..$program\_OBJECTS..*)"; + # $lookup = quotemeta($lookup); + if ($MakefileData =~ /\n$lookup\n/) { + + my $line = "$1$2: "; + foreach $file (split(' ', $idlfiles{$program})) { + $line .= "$file.$cxxsuffix "; + } + $line .= $3; + substituteLine($lookup, $line); + } else { + print STDERR "no built dependency found $lookup\n"; + } + } +} + +sub tag_UIFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my @depFiles = (); + + foreach $source (@psources) { + + if ($source =~ m/\.ui$/) { + + print STDERR "adding UI file $source\n" if ($verbose); + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.ui$//; + + my $sourcedir = ''; + if (-f "$makefileDir/$source.ui") { + $sourcedir = '$(srcdir)/'; + } + + if (!$uiFiles{$source}) { + + my $dep_lines = "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n"; + $dep_lines .= "\trm -f $source.$cxxsuffix\n"; + if (!$kdeopts{"qtonly"}) { + $dep_lines .= "\techo '#include <kdialog.h>' > $source.$cxxsuffix\n"; + $dep_lines .= "\techo '#include <klocale.h>' >> $source.$cxxsuffix\n"; + my ($mangled_source) = $source; + $mangled_source =~ s/[^A-Za-z0-9]/_/g; # get rid of garbage + $dep_lines .= "\t\$(UIC) -tr \${UIC_TR} -i $source.h $sourcedir$source.ui > $source.$cxxsuffix.temp ; ret=\$\$?; \\\n"; + $dep_lines .= "\t\$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" $source.$cxxsuffix.temp | \$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | \$(PERL) -pe \"s,image([0-9][0-9]*)_data,img\\\$\$1_" . $mangled_source . ",g\" | \$(PERL) -pe \"s,: QWizard\\(,: KWizard(,g\" >> $source.$cxxsuffix ;\\\n"; + $dep_lines .= "\trm -f $source.$cxxsuffix.temp ;\\\n"; + } else { + $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix; ret=\$\$?; \\\n"; + } + $dep_lines .= "\tif test \"\$\$ret\" = 0; then echo '#include \"$source.moc\"' >> $source.$cxxsuffix; else rm -f $source.$cxxsuffix ; exit \$\$ret ; fi\n\n"; + $dep_lines .= "$source.h: $sourcedir$source.ui\n"; + $dep_lines .= "\trm -rf $source.h;\n"; + if (!$kdeopts{"qtonly"}) { + $dep_lines .= "\t\$(UIC) $sourcedir$source.ui | \$(PERL) -pi -e \"s,public QWizard,public KWizard,g; s,#include <qwizard.h>,#include <kwizard.h>,g\" >> $source.h ;\n"; + } else { + $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n"; + } + $dep_lines .= "$source.moc: $source.h\n"; + $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n"; + + $rule_adds{"$source.$cxxsuffix"} = $dep_lines; + + $uiFiles{$source} = 1; + $dependmocs{$program} .= " $source.moc"; + $globalmocs{$source} = "\035$source.h\035$source.cpp"; + } + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $source.lo"; + } else { + $realObjs{$program} .= " $source.\$(OBJEXT)"; + } + $sources{$program} .= " $source.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$source.h "; + $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc "; + push(@cleanfiles, "$source.$cxxsuffix"); + push(@cleanfiles, "$source.h"); + push(@cleanfiles, "$source.moc"); + $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); + } + } +} + +sub tag_KCFGFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my @depFiles = (); + + foreach $source (@psources) { + + if ($source =~ m/\.kcfgc$/) { + + print STDERR "adding KCFG file $source\n" if ($verbose); + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.kcfgc$//; + + my $sourcedir = ''; + if (-f "$makefileDir/$source.kcfgc") { + $sourcedir = '$(srcdir)/'; + } + + if (!$kcfgFiles{$source}) { + $kcfg = "$program.kcfg"; + findKcfgFile("$source.kcfgc"); + + my $fixsuffix = ""; + $fixsuffix = "else mv $source.cpp $source.$cxxsuffix ; " + unless "cpp" eq $cxxsuffix; + + my $dep_lines = "$source.$cxxsuffix: $source.h\n"; + $dep_lines .= "$source.h: $sourcedir$kcfg $sourcedir$source.kcfgc \$(KCFG_DEPENDENCIES)\n"; + $dep_lines .= "\t\$(KCONFIG_COMPILER) $sourcedir$kcfg $sourcedir$source.kcfgc; ret=\$\$?; \\\n"; + $dep_lines .= "\tif test \"\$\$ret\" != 0; then rm -f $source.h ; exit \$\$ret ; $fixsuffix fi\n\n"; + + $rule_adds{"$source.$cxxsuffix"} = $dep_lines; + + $kcfgFiles{$source} = 1; + } + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $source.lo"; + } else { + $realObjs{$program} .= " $source.\$(OBJEXT)"; + } + $sources{$program} .= " $source.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$source.h "; + $kcfg_output .= "\\\n\t$source.$cxxsuffix $source.h "; + push(@cleanfiles, "$source.$cxxsuffix"); + push(@cleanfiles, "$source.h"); + $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); + } + } +} + +sub tag_ICON() +{ + my $lookup = '([^\s]*)_ICON\s*=[ \t]*(.*)'; + my $install = ""; + my $uninstall = ""; + + while ($MakefileData =~ /\n$lookup/g) { + my $destdir; + if ($1 eq "KDE") { + $destdir = "kde_icondir"; + } else { + $destdir = $1 . "dir"; + } + my $iconauto = ($2 =~ /AUTO\s*$/); + my @appnames = (); + if ( ! $iconauto ) { + my $appicon_str = $2; + my @_appnames = split(" ", $appicon_str); + print STDOUT "KDE_ICON processing <@_appnames>\n" if ($verbose); + foreach $appname (@_appnames) { + push(@appnames, quotemeta($appname)); + } + } else { + print STDOUT "KDE_ICON processing <AUTO>\n" if ($verbose); + } + + my @files = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); + next if (! -f $entry); + if ( $iconauto ) + { + push(@files, $entry) + if ($entry =~ /\.xpm/ || $entry =~ /\.png/ || $entry =~ /\.mng/ || $entry =~ /\.svg/); + } else { + foreach $appname (@appnames) { + push(@files, $entry) + if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/ || $entry =~ /-$appname\.mng/ || $entry =~ /-$appname\.svg/); + } + } + } + closedir (THISDIR); + + my %directories = (); + + foreach $file (@files) { + my $newfile = $file; + my $prefix = $file; + $prefix =~ s/\.(png|xpm|mng|svg|svgz)$//; + my $appname = $prefix; + $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; + $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; + $appname = quotemeta($appname); + $prefix =~ s/$appname$//; + $prefix =~ s/-$//; + + $prefix = 'lo16-app' if ($prefix eq 'mini'); + $prefix = 'lo32-app' if ($prefix eq 'lo'); + $prefix = 'hi48-app' if ($prefix eq 'large'); + $prefix .= '-app' if ($prefix =~ m/^...$/); + + my $type = $prefix; + $type =~ s/^.*-([^-]+)$/$1/; + $prefix =~ s/^(.*)-[^-]+$/$1/; + + my %type_hash = + ( + 'action' => 'actions', + 'app' => 'apps', + 'device' => 'devices', + 'filesys' => 'filesystems', + 'mime' => 'mimetypes' + ); + + if (! defined $type_hash{$type} ) { + print STDERR "unknown icon type $type in $printname ($file)\n"; + next; + } + + my %dir_hash = + ( + 'los' => 'locolor/16x16', + 'lom' => 'locolor/32x32', + 'him' => 'hicolor/32x32', + 'hil' => 'hicolor/48x48', + 'lo16' => 'locolor/16x16', + 'lo22' => 'locolor/22x22', + 'lo32' => 'locolor/32x32', + 'hi16' => 'hicolor/16x16', + 'hi22' => 'hicolor/22x22', + 'hi32' => 'hicolor/32x32', + 'hi48' => 'hicolor/48x48', + 'hi64' => 'hicolor/64x64', + 'hi128' => 'hicolor/128x128', + 'hisc' => 'hicolor/scalable', + 'cr16' => 'crystalsvg/16x16', + 'cr22' => 'crystalsvg/22x22', + 'cr32' => 'crystalsvg/32x32', + 'cr48' => 'crystalsvg/48x48', + 'cr64' => 'crystalsvg/64x64', + 'cr128' => 'crystalsvg/128x128', + 'crsc' => 'crystalsvg/scalable' + ); + + $newfile =~ s@.*-($appname\.(png|xpm|mng|svgz|svg?))@$1@; + + if (! defined $dir_hash{$prefix}) { + print STDERR "unknown icon prefix $prefix in $printname\n"; + next; + } + + my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type}; + if ($newfile =~ /-[^\.]/) { + my $tmp = $newfile; + $tmp =~ s/^([^-]+)-.*$/$1/; + $dir = $dir . "/" . $tmp; + $newfile =~ s/^[^-]+-//; + } + + if (!defined $directories{$dir}) { + $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n"; + $directories{$dir} = 1; + } + + $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; + $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; + + } + } + + if (length($install)) { + $target_adds{"install-data-am"} .= "install-kde-icons "; + $target_adds{"uninstall-am"} .= "uninstall-kde-icons "; + appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall); + } +} + +sub handle_POFILES($$) +{ + my @pofiles = split(" ", $_[0]); + my $lang = $_[1]; + + # Build rules for creating the gmo files + my $tmp = ""; + my $allgmofiles = ""; + my $pofileLine = "POFILES ="; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + $tmp .= "$1.gmo: $pofile\n"; + $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n"; + $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n"; + $allgmofiles .= " $1.gmo"; + $pofileLine .= " $1.po"; + } + appendLines ($tmp); + my $lookup = 'POFILES\s*=([^\n]*)'; + if ($MakefileData !~ /\n$lookup/) { + appendLines("$pofileLine\nGMOFILES =$allgmofiles"); + } else { + substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles"); + } + + if ($allgmofiles) { + + # Add the "clean" rule so that the maintainer-clean does something + appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n"); + + $target_adds{"maintainer-clean"} .= "clean-nls "; + + $lookup = 'DISTFILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1"; + substituteLine ($lookup, $tmp); + } + } + + $target_adds{"install-data-am"} .= "install-nls "; + + $tmp = "install-nls:\n"; + if ($lang) { + $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n"; + } + $tmp .= "\t\@for base in "; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + $tmp .= "$1 "; + } + + $tmp .= "; do \\\n"; + if ($lang) { + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t fi ;\\\n"; + } else { + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n"; + $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t fi ;\\\n"; + } + $tmp .= "\tdone\n\n"; + appendLines ($tmp); + + $target_adds{"uninstall"} .= "uninstall-nls "; + + $tmp = "uninstall-nls:\n"; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + if ($lang) { + $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n"; + } else { + $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n"; + } + } + appendLines($tmp); + + $target_adds{"all"} .= "all-nls "; + + $tmp = "all-nls: \$(GMOFILES)\n"; + + appendLines($tmp); + + $target_adds{"distdir"} .= "distdir-nls "; + + $tmp = "distdir-nls:\$(GMOFILES)\n"; + $tmp .= "\tfor file in \$(POFILES); do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + $tmp .= "\tfor file in \$(GMOFILES); do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + + appendLines ($tmp); + + if (!$lang) { + appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n"); + } + +} + +#----------------------------------------------------------------------------- + +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_POFILES () +{ + my $lookup = 'POFILES\s*=([^\n]*)'; + return 1 if ($MakefileData !~ /\n$lookup/); + print STDOUT "POFILES processing <$1>\n" if ($verbose); + + my $tmp = $1; + + # make sure these are all gone. + if ($MakefileData =~ /\n\.po\.gmo:\n/) + { + print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n"; + return 1; + } + + # Either find the pofiles in the directory (AUTO) or use + # only the specified po files. + my $pofiles = ""; + if ($tmp =~ /^\s*AUTO\s*$/) + { + opendir (THISDIR, "."); + $pofiles = join(" ", grep(/\.po$/, readdir(THISDIR))); + closedir (THISDIR); + print STDOUT "pofiles found = $pofiles\n" if ($verbose); + if (-f "charset" && -f "kdelibs/kdelibs.po") { + handle_TOPLEVEL(); + } + } + else + { + $tmp =~ s/\034/ /g; + $pofiles = $tmp; + } + return 1 if (!$pofiles); # Nothing to do + + handle_POFILES($pofiles, $kdelang); + + return 0; +} + +sub helper_LOCALINSTALL($) +{ + my $lookup = "\035" . $_[0] . " *:[^\035]*\035\t"; + my $copy = $MakefileData; + $copy =~ s/\n/\035/g; + if ($copy =~ /($lookup.*)$/) { + + $install = $1; + $install =~ s/\035$_[0] *:[^\035]*\035//; + my $emptyline = 0; + while (! $emptyline ) { + if ($install =~ /([^\035]*)\035(.*)/) { + local $line = $1; + $install = $2; + if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) { + $emptyline = 1; + } else { + replaceDestDir($line); + } + } else { + $emptyline = 1; + } + } + } + +} + +sub tag_LOCALINSTALL () +{ + helper_LOCALINSTALL('install-exec-local'); + helper_LOCALINSTALL('install-data-local'); + helper_LOCALINSTALL('uninstall-local'); + + return 0; +} + +sub replaceDestDir($) { + local $line = $_[0]; + + if ( $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/ + || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/ + || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/) + { + $line =~ s/^(.*) ([^\s]+)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/); + } + + if ($line ne $_[0]) { + $_[0] = quotemeta $_[0]; + substituteLine($_[0], $line); + } +} + +#--------------------------------------------------------------------------- +# libtool is very hard to persuade it could use -Wl,--no-undefined for making +# -no-undefined actually work +# append $(KDE_NO_UNFINED) after every -no-undefined in LDFLAGS +# this may go away if libtool ever does this on its own +sub tag_NO_UNDEFINED () { + return if ($program !~ /_la$/); + + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + return if (!defined($1)); + return if ($1 !~ /CXXLINK/); + + if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ ) { + return; + } + + $lookup = $program . '\_LDFLAGS(\s*)=(.*)-no-undefined(.*)'; + if ($MakefileData =~ /\n$lookup\n/) { + my $replace = $program . "\_LDFLAGS$1=$2-no-undefined \$(KDE_NO_UNDEFINED)$3"; + substituteLine($lookup, $replace); + } +} + +sub tag_CLOSURE () { + return if ($program !~ /_la$/); + + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + return if (!defined($1)); + return if ($1 !~ /CXXLINK/); + + if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ && + $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) { + print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun); + return; + } + + my $closure = $realname{$program} . ".closure"; + my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n"; + $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n"; + $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n"; + $lines .= "\t\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n"; + $lines .= "\t\@rm -f $program\_closure.* $closure\n"; + $lines .= "\t\@echo \"timestamp\" > $closure\n"; + $lines .= "\n"; + appendLines($lines); + $lookup = $realname{$program} . ": (.*)"; + if ($MakefileData =~ /\n$lookup\n/) { + $lines = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1"; + $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1"; + substituteLine($lookup, $lines); + } + $closure_output .= " $closure"; +} + +sub tag_NMCHECK () { + return if ($program !~ /_la$/); + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + my $linkcmd = $1; + return if (!defined($1)); + return if ($linkcmd !~ /CXXLINK/ && $linkcmd !~ /LINK/); + + $lookup = $program . '_NMCHECK\s*=([^\n]*)'; + if( $MakefileData !~ m/\n$lookup\n/ ) { + return; + } + my $allowed = $1; + $allowed =~ s/^ *//; + $lookup = $program . '_NMCHECKWEAK\s*=([^\n]*)'; + my $weak = ""; + my $is_weak = 0; + if( $MakefileData =~ m/\n$lookup\n/ ) { + $weak = $1; + $is_weak = 1; + } + $weak =~ s/^ *//; + + if( $is_weak ) + { + $weak = '--allowweak=\'' . $weak . '\' '; + } + my $nmline = "\@KDE_USE_NMCHECK_TRUE@\t\@\$(MAKE) \$(AM_MAKEFLAGS) nmcheck_$realname{$program} || ( rm -f $realname{$program}; exit 1 )"; + $lookup = '(\t\$\(CXXLINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; + if( $MakefileData =~ /\n$lookup\n/ ) { + my $oldstuff = $1; + substituteLine( $lookup, $oldstuff . "\n" . $nmline ); + } + $lookup = '(\t\$\(LINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; + if( $MakefileData =~ /\n$lookup\n/ ) { + my $oldstuff = $1; + substituteLine( $lookup, $oldstuff . "\n" . $nmline ); + } + $nmline = "\@\$(top_srcdir)/admin/nmcheck $realname{$program} \'$allowed\' $weak"; + appendLines( "\nnmcheck_$realname{$program}: $realname{$program} \n\t$nmline\n" ); + $target_adds{ "nmcheck" } .= "nmcheck_$realname{$program} "; +} + +sub tag_DIST () { + my %foundfiles = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry eq "Makefile" || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); + next if (! -f $entry); + next if ($entry =~ /\.moc/ || $entry =~ /\.moc.$cppExt$/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/); + next if ($entry =~ /\.all_$cppExt\.$cppExt$/); + $foundfiles{$entry} = 1; + } + closedir (THISDIR); + + # doing this for MAINTAINERCLEANFILES would be wrong + my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS'); + foreach $mark (@marks) { + while ($MakefileData =~ /\n($mark)\s*=[ \t]*([^\n]*)/g) { + my $cleanfiles_str = $2; + foreach $file (split('[\034\s]+', $cleanfiles_str)) { + $file =~ s/\.\///; + $foundfiles{$file} = 0 if (defined $foundfiles{$file}); + } + } + } + my @files = ("Makefile", "config.cache", "config.log", "stamp-h", + "stamp-h1", "stamp-h1", "config.h", "Makefile", + "config.status", "config.h", "libtool", "core" ); + foreach $file (@files) { + $foundfiles{$file} = 0 if (defined $foundfiles{$file}); + } + + my $KDE_DIST = ""; + foreach $file (keys %foundfiles) { + if ($foundfiles{$file} == 1) { + $KDE_DIST .= "$file "; + } + } + if ($KDE_DIST) { + print "KDE_DIST $printname $KDE_DIST\n" if ($verbose); + + my $lookup = 'DISTFILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "DISTFILES = $1 \$(KDE_DIST)"); + appendLines("KDE_DIST=$KDE_DIST\n"); + } + } +} + +#----------------------------------------------------------------------------- +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_DOCFILES () +{ + $target_adds{"all"} .= "docs-am "; + + my $lookup = 'KDE_DOCS\s*=[ \t]*([^\n]*)'; + goto nodocs if ($MakefileData !~ /\n$lookup/); + print STDOUT "KDE_DOCS processing <$1>\n" if ($verbose); + + my $tmp = $1; + + # Either find the files in the directory (AUTO) or use + # only the specified po files. + my $files = ""; + my $appname = $tmp; + $appname =~ s/^(\S*)\s*.*$/$1/; + if ($appname =~ /AUTO/) { + $appname = basename($makefileDir); + if ("$appname" eq "en") { + print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n"; + exit(1); + } + } + + if ($tmp !~ / - /) + { + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry eq "core" || $entry eq "index.cache.bz2"); + next if (! -f $entry); + $files .= "$entry "; + } + closedir (THISDIR); + print STDOUT "docfiles found = $files\n" if ($verbose); + } + else + { + $tmp =~ s/\034/ /g; + $tmp =~ s/^\S*\s*-\s*//; + $files = $tmp; + } + goto nodocs if (!$files); # Nothing to do + + if ($files =~ /(^| )index\.docbook($| )/) { + + my $lines = ""; + my $lookup = 'MEINPROC\s*='; + if ($MakefileData !~ /\n($lookup)/) { + $lines = "MEINPROC=/\$(kde_bindir)/meinproc\n"; + } + $lookup = 'KDE_XSL_STYLESHEET\s*='; + if ($MakefileData !~ /\n($lookup)/) { + $lines .= "KDE_XSL_STYLESHEET=/\$(kde_datadir)/ksgmltools2/customization/kde-chunk.xsl\n"; + } + $lookup = '\nindex.cache.bz2:'; + if ($MakefileData !~ /\n($lookup)/) { + $lines .= "index.cache.bz2: \$(srcdir)/index.docbook \$(KDE_XSL_STYLESHEET) $files\n"; + $lines .= "\t\@if test -n \"\$(MEINPROC)\"; then echo \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; fi\n"; + $lines .= "\n"; + } + + $lines .= "docs-am: index.cache.bz2\n"; + $lines .= "\n"; + $lines .= "install-docs: docs-am install-nls\n"; + $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; + $lines .= "\t\@if test -f index.cache.bz2; then \\\n"; + $lines .= "\techo \$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\t\$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\telif test -f \$(srcdir)/index.cache.bz2; then \\\n"; + $lines .= "\techo \$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\t\$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\tfi\n"; + $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; + $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; + + $lines .= "\n"; + $lines .= "uninstall-docs:\n"; + $lines .= "\t-rm -rf \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; + $lines .= "\n"; + $lines .= "clean-docs:\n"; + $lines .= "\t-rm -f index.cache.bz2\n"; + $lines .= "\n"; + $target_adds{"install-data-am"} .= "install-docs "; + $target_adds{"uninstall"} .= "uninstall-docs "; + $target_adds{"clean-am"} .= "clean-docs "; + appendLines ($lines); + } else { + appendLines("docs-am: $files\n"); + } + + $target_adds{"install-data-am"} .= "install-nls "; + $target_adds{"uninstall"} .= "uninstall-nls "; + + $tmp = "install-nls:\n"; + $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; + $tmp .= "\t\@for base in $files; do \\\n"; + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\t \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\tdone\n"; + if ($appname eq 'common') { + $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n"; + $tmp .= "\tif test ! -f \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n"; + $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n"; + $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n"; + $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n"; + $tmp .= "\t case \" $files \" in \\\n"; + $tmp .= "\t *\" \$\$p \"*) ;; \\\n"; + $tmp .= "\t *) test ! -f \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n"; + $tmp .= "\t esac ; \\\n"; + $tmp .= "\tdone ; fi ; true\n"; + } + $tmp .= "\n"; + $tmp .= "uninstall-nls:\n"; + $tmp .= "\tfor base in $files; do \\\n"; + $tmp .= "\t rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\tdone\n\n"; + appendLines ($tmp); + + $target_adds{"distdir"} .= "distdir-nls "; + + $tmp = "distdir-nls:\n"; + $tmp .= "\tfor file in $files; do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + + appendLines ($tmp); + + return 0; + + nodocs: + appendLines("docs-am:\n"); + return 1; +} + +#----------------------------------------------------------------------------- +# Find headers in any of the source directories specified previously, that +# are candidates for "moc-ing". +sub findMocCandidates () +{ + foreach $dir (@headerdirs) + { + my @list = (); + opendir (SRCDIR, "$dir"); + @hFiles = grep { /.+\.$hExt$/o && !/^\./ } readdir(SRCDIR); + closedir SRCDIR; + foreach $hf (@hFiles) + { + next if ($hf =~ /^\.\#/); + $hf =~ /(.*)\.[^\.]*$/; # Find name minus extension + next if ($uiFiles{$1}); + open (HFIN, "$dir/$hf") || die "Could not open $dir/$hf: $!\n"; + my $hfsize = 0; + seek(HFIN, 0, 2); + $hfsize = tell(HFIN); + seek(HFIN, 0, 0); + read HFIN, $hfData, $hfsize; + close HFIN; + # push (@list, $hf) if(index($hfData, "Q_OBJECT") >= 0); ### fast but doesn't handle //Q_OBJECT + # handle " { friend class blah; Q_OBJECT ", but don't match antlarr_Q_OBJECT (\b). + if ( $hfData =~ /{([^}]*)\bQ_OBJECT/s ) { + push (@list, $hf) unless $1 =~ m://[^\n]*Q_OBJECT[^\n]*$:s; ## reject "// Q_OBJECT" + } + } + # The assoc array of root of headerfile and header filename + foreach $hFile (@list) + { + $hFile =~ /(.*)\.[^\.]*$/; # Find name minus extension + if ($mocFiles{$1}) + { + print STDERR "Warning: Multiple header files found for $1\n"; + next; # Use the first one + } + $mocFiles{$1} = "$dir\035$hFile"; # Add relative dir + } + } + + return 0; +} + +#----------------------------------------------------------------------------- + +# The programmer has specified a moc list. Prune out the moc candidates +# list that we found based on looking at the header files. This generates +# a warning if the programmer gets the list wrong, but this doesn't have +# to be fatal here. +sub pruneMocCandidates ($) +{ + my %prunedMoc = (); + local @mocList = split(' ', $_[0]); + + foreach $mocname (@mocList) + { + $mocname =~ s/\.moc$//; + if ($mocFiles{$mocname}) + { + $prunedMoc{$mocname} = $mocFiles{$mocname}; + } + else + { + my $print = $makefileDir; + $print =~ s/^\Q$topdir\E\\//; + # They specified a moc file but we can't find a header that + # will generate this moc file. That's possible fatal! + print STDERR "Warning: No moc-able header file for $print/$mocname\n"; + } + } + + undef %mocFiles; + %mocFiles = %prunedMoc; +} + +#----------------------------------------------------------------------------- + +# Finds the cpp files (If they exist). +# The cpp files get appended to the header file separated by \035 +sub checkMocCandidates () +{ + my @cppFiles; + my $cpp2moc; # which c++ file includes which .moc files + my $moc2cpp; # which moc file is included by which c++ files + + return unless (keys %mocFiles); + opendir(THISDIR, ".") || return; + @cppFiles = grep { /.+\.$cppExt$/o && !/.+\.moc\.$cppExt$/o + && !/.+\.all_$cppExt\.$cppExt$/o + && !/^\./ } readdir(THISDIR); + closedir THISDIR; + return unless (@cppFiles); + my $files = join (" ", @cppFiles); + $cpp2moc = {}; + $moc2cpp = {}; + foreach $cxxf (@cppFiles) + { + open (CXXFIN, $cxxf) || die "Could not open $cxxf: $!\n"; + seek(CXXFIN, 0, 2); + my $cxxfsize = tell(CXXFIN); + seek(CXXFIN, 0, 0); + read CXXFIN, $cxxfData, $cxxfsize; + close CXXFIN; + while(($cxxfData =~ m/^[ \t]*\#include\s*[<\"](.*\.moc)[>\"]/gm)) { + $cpp2moc->{$cxxf}->{$1} = 1; + $moc2cpp->{$1}->{$cxxf} = 1; + } + } + foreach my $mocFile (keys (%mocFiles)) + { + @cppFiles = keys %{$moc2cpp->{"$mocFile.moc"}}; + if (@cppFiles == 1) { + $mocFiles{$mocFile} .= "\035" . $cppFiles[0]; + push(@depend, $mocFile); + } elsif (@cppFiles == 0) { + push (@newObs, $mocFile); # Produce new object file + next if ($haveAutomocTag); # This is expected... + # But this is an error we can deal with - let them know + print STDERR + "Warning: No c++ file that includes $mocFile.moc\n"; + } else { + # We can't decide which file to use, so it's fatal. Although as a + # guess we could use the mocFile.cpp file if it's in the list??? + print STDERR + "Error: Multiple c++ files that include $mocFile.moc\n"; + print STDERR "\t",join ("\t", @cppFiles),"\n"; + $errorflag = 1; + delete $mocFiles{$mocFile}; + # Let's continue and see what happens - They have been told! + } + } +} + +#----------------------------------------------------------------------------- + +# Add the rules for generating moc source from header files +# For Automoc output *.moc.cpp but normally we'll output *.moc +# (We must compile *.moc.cpp separately. *.moc files are included +# in the appropriate *.cpp file by the programmer) +sub addMocRules () +{ + my $cppFile; + my $hFile; + + foreach $mocFile (keys (%mocFiles)) + { + undef $cppFile; + ($dir, $hFile, $cppFile) = split ("\035", $mocFiles{$mocFile}, 3); + $dir =~ s#^\.#\$(srcdir)#; + if (defined ($cppFile)) + { + $cppFile =~ s,\.[^.]*$,,; + $target_adds{"$cppFile.o"} .= "$mocFile.moc "; + $target_adds{"$cppFile.lo"} .= "$mocFile.moc "; + appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n"); + $cleanMoc .= " $mocFile.moc"; + appendLines ("mocs: $mocFile.moc\n"); + } + else + { + appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n"); + $cleanMoc .= " $mocFile$mocExt"; + appendLines ("mocs: $mocFile$mocExt\n"); + } + } +} + +sub make_bcheck_target() +{ + my $lookup = 'RECURSIVE_TARGETS\s*=[ \t]*(.*)'; + my $bcheckdep = "bcheck-am"; + $bcheckdep = "bcheck-recursive" if ($MakefileData =~ /\n$lookup/); + + my $headers= ""; + $headers = $1 if($MakefileData =~ /\nHEADERS\s*=[ \t]*(.+)/); + $headers =~ s/\$\((?:noinst|EXTRA)_HEADERS\)//g; + + $target_adds{"clean-am"} .= "clean-bcheck "; + + my $t = "clean-bcheck: \n" . + "\trm -f *.bchecktest.cc *.bchecktest.cc.class a.out\n\n" . + "bcheck: $bcheckdep\n\n" . + "bcheck-am:\n" . + "\t\@for i in $headers; do \\\n" . + "\t if test \$(srcdir)/\$\$i -nt \$\$i.bchecktest.cc; then \\\n" . + "\t echo \"int main() {return 0;}\" > \$\$i.bchecktest.cc ; \\\n" . + "\t echo \"#include \\\"\$\$i\\\"\" >> \$\$i.bchecktest.cc ; \\\n" . + "\t echo \"\$\$i\"; \\\n" . + "\t if ! "; + $t .= $cxxsuffix eq "KKK" ? + "\$(CXX) \$(DEFS) -I. -I\$(srcdir) -I\$(top_builddir) \$(INCLUDES) \$(AM_CPPFLAGS) \$(CPPFLAGS) \$(CXXFLAGS) \$(KDE_CXXFLAGS) " : + "\$(CXXCOMPILE) "; + $t .= " --dump-class-hierarchy -c \$\$i.bchecktest.cc; then \\\n" . + "\t rm -f \$\$i.bchecktest.cc; exit 1; \\\n" . + "\t fi ; \\\n" . + "\t echo \"\" >> \$\$i.bchecktest.cc.class; \\\n" . + "\t perl \$(top_srcdir)/admin/bcheck.pl \$\$i.bchecktest.cc.class || { rm -f \$\$i.bchecktest.cc; exit 1; }; \\\n" . + "\t rm -f a.out; \\\n" . + "\t fi ; \\\n" . + "\tdone\n"; + appendLines("$t\n"); +} + +sub make_meta_classes () +{ + return if ($kdeopts{"qtonly"}); + + my $cppFile; + my $hFile; + my $moc_class_headers = ""; + foreach $program (@programs) { + my $mocs = ""; + my @progsources = split(/[\034\s]+/, $sources{$program}); + my @depmocs = split(' ', $dependmocs{$program}); + my %shash = (), %mhash = (); + @shash{@progsources} = 1; # we are only interested in the existence + @mhash{@depmocs} = 1; + + print STDOUT "program=$program\n" if ($verbose); + print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose); + print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose); + print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose); + foreach my $mocFile (keys (%globalmocs)) + { + my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); + if (defined ($cppFile)) + { + $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; + } + else + { + # Bah. This is the case, if no C++ file includes the .moc + # file. We make a .moc.cpp file for that. Unfortunately this + # is not included in the %sources hash, but rather is mentioned + # in %dependmocs. If the user wants to use AUTO he can't just + # use an unspecific METAINCLUDES. Instead he must use + # program_METAINCLUDES. Anyway, it's not working real nicely. + # E.g. Its not clear what happens if user specifies two + # METAINCLUDES=AUTO in the same Makefile.am. + $mocs .= " $mocFile.moc.$cxxsuffix" + if exists $mhash{$mocFile.".moc.$cxxsuffix"}; + } + } + if ($mocs) { + print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose); + } + print STDOUT "\n" if $verbose; + } + if ($moc_class_headers) { + appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes "; + } +} + +#----------------------------------------------------------------------------- + +sub updateMakefile () +{ + return if ($dryrun); + + open (FILEOUT, "> $makefile") + || die "Could not create $makefile: $!\n"; + + $MakefileData =~ s/\034/\\\n/g; # Restore continuation lines + # Append our $progId line, _below_ the "generated by automake" line + # because automake-1.6 relies on the first line to be his own. + my $progIdLine = "\# $progId - " . '$Revision: 483858 $ '."\n"; + if ( !( $MakefileData =~ s/^(.*generated .*by automake.*\n)/$1$progIdLine/ ) ) { + warn "automake line not found in $makefile\n"; + # Fallback: first line + print FILEOUT $progIdLine; + }; + print FILEOUT $MakefileData; + close FILEOUT; +} + +#----------------------------------------------------------------------------- + +# The given line needs to be removed from the makefile +# Do this by adding the special "removed line" comment at the line start. +sub removeLine ($$) +{ + my ($lookup, $old) = @_; + + $old =~ s/\034/\\\n#>- /g; # Fix continuation lines + $MakefileData =~ s/\n$lookup/\n#>\- $old/; +} + +#----------------------------------------------------------------------------- + +# Replaces the old line with the new line +# old line(s) are retained but tagged as removed. The new line(s) have the +# "added" tag placed before it. +sub substituteLine ($$) +{ + my ($lookup, $new) = @_; + + if ($MakefileData =~ /\n($lookup)/) { + $old = $1; + $old =~ s/\034/\\\n#>\- /g; # Fix continuation lines + my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; + $new =~ s/\\\n/\034/g; + $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/; + } else { + warn "Warning: substitution of \"$lookup\" in $printname failed\n"; + } +} + +#----------------------------------------------------------------------------- + +# Slap new lines on the back of the file. +sub appendLines ($) +{ + my ($new) = @_; + my $copynew = $new; + my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; + $new =~ s/\\\n/\034/g; # Fix continuation lines + $MakefileData .= "\n#>\+ $newCount\n$new"; +} + +#----------------------------------------------------------------------------- + +# Restore the Makefile.in to the state it was before we fiddled with it +sub restoreMakefile () +{ + $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g; + # Restore removed lines + $MakefileData =~ s/([\n\034])#>\- /$1/g; + # Remove added lines + while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/) + { + my $newCount = $1; + my $removeLines = ""; + while ($newCount--) { + $removeLines .= "[^\n\034]*([\n\034]|)"; + } + $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/; + } +} + +#----------------------------------------------------------------------------- + +# find the .kcfg file listed in the .kcfgc file +sub findKcfgFile($) +{ + my ($kcfgf) = @_; + open (KCFGFIN, $kcfgf) || die "Could not open $kcfgf: $!\n"; + seek(KCFGFIN, 0, 2); + my $kcfgfsize = tell(KCFGFIN); + seek(KCFGFIN, 0, 0); + read KCFGFIN, $kcfgfData, $kcfgfsize; + close KCFGFIN; + if(($kcfgfData =~ m/^File=(.*\.kcfg)/gm)) { + $kcfg = $1; + } +} diff --git a/admin/bcheck.pl b/admin/bcheck.pl new file mode 100644 index 0000000..cca973e --- /dev/null +++ b/admin/bcheck.pl @@ -0,0 +1,157 @@ +#!/usr/bin/perl -w + +use DB_File; +use Fcntl ':flock'; + +if (!defined($ARGV[0])) { + print "usage: requires .class dump as parameter!\n"; + exit; +} + +sub bailout +{ + untie %bcheckdb if(defined(%bcheckdb)); + + if(defined(MYLOCK)) { + flock MYLOCK, LOCK_UN; + close(MYLOCK); + } + + print @_; + exit 5; +} + +sub ask_user +{ + my ($dbkey, $dbchunk) = @_; + + if (defined($ENV{"BCHECK_UPDATE"})) { + $bcheckdb{$dbkey} = $dbchunk; + return; + } + + &bailout("BC problem detected") if (! -t STDIN); + + print "(I)gnore / (Q)uit / (U)pdate: "; + + my $key; + while(defined(read STDIN, $key, 1)) { + $key = lc($key); + + print "got: >$key<\n"; + + return if ($key eq 'i'); + + &bailout("BC problem. aborted") if ($key eq 'q'); + + if ($key eq 'u') { + $bcheckdb{$dbkey} = $dbchunk; + return; + } + print "\n(I)gnore / (Q)uit / (U)pdate: "; + } +} + +sub diff_chunk($$) +{ + my ($oldl, $newl) = @_; + my @old = split /^/m, $oldl; + my @new = split /^/m, $newl; + my $haschanges = 0; + my $max = $#old > $#new ? $#old : $#new; + + die "whoops. key different" if ($old[0] ne $new[0]); + + if ($#old != $#new) { + warn ("Structural difference.\n"); + print @old; + print "-----------------------------------------------\n"; + print @new; + $haschanges = 1; + return $haschanges; + } + + print $old[0]; + + my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/); + + my $c = 1; + while ($c < $max) { + my ($o, $n) = ($old[$c], $new[$c]); + chomp $o; + chomp $n; + $c++; + next if ($o eq $n); + + if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) { + next if ($n eq "$1$class$2"); + } + + $haschanges = 1; + + print "-$o\n+$n\n\n"; + } + + return $haschanges; +} + +local $dblock = $ENV{"HOME"} . "/bcheck.lock"; +my $dbfile = $ENV{"HOME"} . "/bcheck.db"; +my $cdump = $ARGV[0]; + +die "file $cdump is not readable: $!" if (! -f $cdump); + +# make sure the advisory lock exists +open(MYLOCK, ">$dblock"); +print MYLOCK ""; + +flock MYLOCK, LOCK_EX; + +tie %bcheckdb, 'DB_File', $dbfile; + +my $chunk = ""; + +open (IN, "<$cdump") or die "cannot open $cdump: $!"; +while (<IN>) { + + chop; + + s/0x[0-9a-fA-F]+/0x......../g; + s/base size=/size=/g; + s/\(\)\s*$//g; + s/base align=/align=/g; + + $chunk .= $_ . "\n"; + + if(/^\s*$/) { + my @lines = split /^/m, $chunk; + my $key = $lines[0]; + chomp $key; + + if($key !~ /<anonymous struct>/ && + $key !~ /<anonymous union>/) { + if(defined($bcheckdb{$key})) { + my $dbversion = $bcheckdb{$key}; + + if($dbversion ne $chunk) { + &ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk)); + } + } + else { + $bcheckdb{$key} = $chunk; + print "NEW: $key\n"; + } + } + + $chunk = ""; + next; + } + +} +close(IN); + +untie %bcheckdb; +flock MYLOCK, LOCK_UN; +close(MYLOCK); + +exit 0; diff --git a/admin/compile b/admin/compile new file mode 100755 index 0000000..1b1d232 --- /dev/null +++ b/admin/compile @@ -0,0 +1,142 @@ +#! /bin/sh +# Wrapper for compilers which do not understand `-c -o'. + +scriptversion=2005-05-14.22 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Written by Tom Tromey <tromey@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand `-c -o'. +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file `INSTALL'. + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; +esac + +ofile= +cfile= +eat= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we strip `-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` + +# Create the lock directory. +# Note: use `[/.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/admin/conf.change.pl b/admin/conf.change.pl new file mode 100644 index 0000000..129d759 --- /dev/null +++ b/admin/conf.change.pl @@ -0,0 +1,191 @@ +#!/usr/bin/env perl + +# this script patches a config.status file, to use our own perl script +# in the main loop +# we do it this way to circumvent hacking (and thereby including) +# autoconf function (which are GPL) into our LGPL acinclude.m4.in +# written by Michael Matz <matz@kde.org> +# adapted by Dirk Mueller <mueller@kde.org> +# +# This file is free software; you can redistribute it and/or +# modify it under the terms of the GNU Library General Public +# License as published by the Free Software Foundation; either +# version 2 of the License, or (at your option) any later version. + +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. + +# You should have received a copy of the GNU Library General Public License +# along with this library; see the file COPYING.LIB. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + +# we have to change two places +# 1. the splitting of the substitutions into chunks of 90 (or even 48 in +# later autoconf's +# 2. the big main loop which patches all Makefile.in's + +use strict; +use File::Basename; + +my $ac_aux_dir = dirname($0); +my ($flag); +my $ac_version = 0; +my $vpath_seen = 0; +$flag = 0; + +while (<>) { +# usage of $flag: 0 -- we have seen nothing yet +# 1 -- we are in (1) +# 2 -- we have ended (1) +# 3 -- we are in (2) +# 4 -- we ended (2) + + if ($flag == 4) { + print; + } elsif ($flag == 0) { +# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..." +# ends with (excluding) "CONFIG_FILE=..." +# in later autoconf (2.14.1) there is no CONFIG_FILES= line, +# but instead the (2) directly follow (1) + if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) { + $flag = 1; + if ($1 eq 'lines') { + # lets hope its different with 2141, + # wasn't able to verify that + if ($2 eq '48') { + $ac_version = 250; + } + else { + $ac_version = 2141; + } + } elsif ($1 eq 'cmds') { + $ac_version = 213; + } + # hmm, we don't know the autoconf version, but we try anyway + } else { + print; + } + } elsif ($flag == 1) { + if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) { + print; + $flag = 2; + } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { + $flag = 3; + } + } elsif ($flag == 2) { +# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1)) +# end with: "rm -f conftest.s\*" +# on autoconf 250, it ends with '# CONFIG_HEADER section' +# +# gg: if a post-processing commands section is found first, +# stop there and insert a new loop to honor the case/esac. +# (pattern: /^\s+#\sRun the commands associated with the file./) + + if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { + $flag = 3; + } else { + print; + } + } elsif ($flag == 3) { + if (/^\s*rm\s+-f\s+conftest/ ) { + $flag = 4; + &insert_main_loop(); + } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) { + $flag = 4; + &insert_main_loop(); + #die "hhhhhhh"; + if ($ac_version != 2141) { + print STDERR "hmm, don't know autoconf version\n"; + } + } elsif (/^\#\s*CONFIG_(HEADER|COMMANDS) section.*|^\s+#\s(Run) the commands associated/) { + $flag = 4; + my $commands = defined $2; + &insert_main_loop(); + $commands && insert_command_loop(); + if($ac_version != 250) { + print STDERR "hmm, something went wrong :-(\n"; + } + } elsif (/VPATH/ ) { + $vpath_seen = 1; + } + } +} + +die "wrong input (flag != 4)" unless $flag == 4; +print STDERR "hmm, don't know autoconf version\n" unless $ac_version; + +sub insert_main_loop { + + if ($ac_version == 250) { + &insert_main_loop_250(); + } + else { + &insert_main_loop_213(); + } +} + +sub insert_main_loop_250 { + + print <<EOF; + #echo Doing the fast build of Makefiles -- autoconf $ac_version +EOF + if ($vpath_seen) { + print <<EOF; + # VPATH subst was seen in original config.status main loop + echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >>\$tmp/subs.sed +EOF + } + print <<EOF; + rm -f \$tmp/subs.files + for ac_file in .. \$CONFIG_FILES ; do + if test "x\$ac_file" != x..; then + echo \$ac_file >> \$tmp/subs.files + fi + done + if test -f \$tmp/subs.files ; then + perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL" + fi + rm -f \$tmp/subs.files + +fi +EOF + return; +} + +sub insert_main_loop_213 { + print <<EOF; +#echo Doing the fast build of Makefiles -- autoconf $ac_version +if test "x\$ac_cs_root" = "x" ; then + ac_cs_root=conftest +fi +EOF + if ($vpath_seen) { + print <<EOF; +# VPATH subst was seen in original config.status main loop +echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >> \$ac_cs_root.subs +EOF + } + print <<EOF; +rm -f \$ac_cs_root.sacfiles +for ac_file in .. \$CONFIG_FILES ; do + if test "x\$ac_file" != x..; then + echo \$ac_file >> \$ac_cs_root.sacfiles + fi +done +if test -f \$ac_cs_root.sacfiles ; then + perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL" +fi +rm -f \$ac_cs_root.s* + +EOF + return; +} + +sub insert_command_loop { + print <<EOF; + for ac_file in .. \$CONFIG_FILES ; do +EOF +} diff --git a/admin/config.guess b/admin/config.guess new file mode 100755 index 0000000..4f0f63f --- /dev/null +++ b/admin/config.guess @@ -0,0 +1,1464 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +timestamp='2005-06-30' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner <per@bothner.com>. +# Please send patches to <config-patches@gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches@gnu.org>." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerppc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include <stdio.h> /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <sys/systemcfg.h> + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include <stdlib.h> + #include <unistd.h> + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <unistd.h> + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + x86:Interix*:[34]*) + echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' + exit ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <features.h> + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` + echo ${UNAME_MACHINE}-pc-isc$UNAME_REL + elif /bin/uname -X 2>/dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel@ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes <hewes@openmarket.com>. + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + *86) UNAME_PROCESSOR=i686 ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c <<EOF +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/utsname.h> +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include <sys/param.h> + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include <sys/param.h> +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 <<EOF +$0: unable to guess system type + +This script, last modified $timestamp, has failed to recognize +the operating system you are using. It is advised that you +download the most up to date version of the config scripts from + + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess +and + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub + +If the version you run ($0) is already up to date, please +send the following data and any information you think might be +pertinent to <config-patches@gnu.org> in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/admin/config.pl b/admin/config.pl new file mode 100644 index 0000000..c2b0517 --- /dev/null +++ b/admin/config.pl @@ -0,0 +1,238 @@ +#!/usr/bin/env perl +# a script for use by autoconf to make the Makefiles +# from the Makefile.in's +# +# the original autoconf mechanism first splits all substitutions into groups +# of ca. 90, and than invokes sed for _every_ Makefile.in and every group +# (so around 2-3 times per Makefile.in). So this takes forever, as sed +# has to recompile the regexps every time. +# +# this script does better. It changes all Makefile.ins in one process. +# in kdelibs the time for building Makefile went down from 2:59 min to 13 sec! +# +# written by Michael Matz <matz@kde.org> +# adapted by Dirk Mueller <mueller@kde.org> + +# This file is free software; you can redistribute it and/or +# modify it under the terms of the GNU Library General Public +# License as published by the Free Software Foundation; either +# version 2 of the License, or (at your option) any later version. + +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. + +# You should have received a copy of the GNU Library General Public License +# along with this library; see the file COPYING.LIB. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + +use strict; + +use File::Path; + +my $ac_subs=$ARGV[0]; +my $ac_sacfiles = $ARGV[1]; +my $ac_given_srcdir=$ARGV[2]; +my $ac_given_INSTALL=$ARGV[3]; + +my @comp_match; +my @comp_subs; + +#print "ac_subs=$ac_subs\n"; +#print "ac_sacfiles=$ac_sacfiles\n"; +#print "ac_given_srcdir=$ac_given_srcdir\n"; +#print "ac_given_INSTALL=$ac_given_INSTALL\n"; + +my $configure_input; +my ($srcdir, $top_srcdir); +my $INSTALL; +my $bad_perl = ($] < 5.005); +my $created_file_count = 0; + +open(CF, "< $ac_subs") || die "can't open $ac_subs: $!"; +my @subs = <CF>; +my $pat; +close(CF); +chomp @subs; +@comp_match=(); +@comp_subs=(); + +if ($bad_perl) { + print "Using perl older than version 5.005\n"; + foreach $pat (@subs) { + if ( ($pat =~ m/s%([^%]*)%([^%]*)%g/ ) + || ($pat =~ m/s%([^%]*)%([^%]*)%;t/ ) + || ($pat =~ m/s,([^,]*),(.*),;t/) + || ($pat =~ m%s/([^/]*)/([^/]*)/g% ) + || ($pat =~ m%s/([^/]*)/([^/]*)/;t% ) + ) { + # form : s%bla%blubb%g + # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) + # or s,bla,blubb,;t t (autoconf 2.52) + my $srch = $1; + my $repl = $2; + $repl =~ s/\\(.)/$1/g; + push @comp_subs, make_closure($srch, $repl); + + } elsif ( ($pat =~ /%([^%]*)%d/ ) + || ($pat =~ m%/([^/]*)/d% ) + ) { + push @comp_subs, make_closure($1, ""); + } else { + die "Uhh. Malformed pattern in $ac_subs ($pat)" + unless ( $pat =~ /^\s*$/ ); # ignore white lines + } + } +} else { + foreach $pat (@subs) { + if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) || + ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) || + ($pat =~ /s,([^,]*),(.*),;t/) ) { + # form : s%bla%blubb%g + # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) + # or s,bla,blubb,;t t (autoconf 2.52) + my $srch = $1; + my $repl = $2; + push @comp_match, eval "qr/\Q$srch\E/"; # compile match pattern + $repl =~ s/\\(.)/$1/g; + push @comp_subs, $repl; + } elsif ( ($pat =~ /%([^%]*)%d/ ) + || ($pat =~ m%/([^/]*)/d% ) + ) { + push @comp_match, eval "qr/\Q$1\E/"; + push @comp_subs, ""; + } else { + die "Uhh. Malformed pattern in $ac_subs ($pat)" + unless ( $pat =~ /^\s*$/ ); # ignore white lines + } + } +} +undef @subs; + +# read the list of files to be patched, form: +# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile + +open(CF, "< $ac_sacfiles") || die "can't open $ac_sacfiles: $!"; +my @ac_files = <CF>; +close(CF); +chomp @ac_files; + + +my $ac_file; +foreach $ac_file (@ac_files) { + next if $ac_file =~ /\.\./; + next if $ac_file =~ /^\s*$/; + my $ac_file_in; + my ($ac_dir, $ac_dots, $ac_dir_suffix); + + if ($ac_file =~ /.*:.*/ ) { + ($ac_file_in = $ac_file) =~ s%[^:]*:%%; + $ac_file =~ s%:.*%%; + } else { + $ac_file_in = $ac_file.".in"; + } + +# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + +# Remove last slash and all that follows it. Not all systems have dirname. + ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%; + if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) { +# The file is in a subdirectory. + if (! -d "$ac_dir") { mkpath "$ac_dir", 0, 0777; } + ($ac_dir_suffix = $ac_dir) =~ s%^./%%; + $ac_dir_suffix="/".$ac_dir_suffix; +# A "../" for each directory in $ac_dir_suffix. + ($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g; + } else { + $ac_dir_suffix=""; + $ac_dots=""; + } + + if ($ac_given_srcdir eq ".") { + $srcdir="."; + if ($ac_dots) { + ( $top_srcdir = $ac_dots) =~ s%/$%%; + } else { $top_srcdir="."; } + } elsif ($ac_given_srcdir =~ m%^/%) { + $srcdir=$ac_given_srcdir.$ac_dir_suffix; + $top_srcdir = $ac_given_srcdir; + } else { + $srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix; + $top_srcdir = $ac_dots.$ac_given_srcdir; + } + + if ($ac_given_INSTALL) { + if ($ac_given_INSTALL =~ m%^/% ) { + $INSTALL = $ac_given_INSTALL; + } else { + $INSTALL = $ac_dots.$ac_given_INSTALL; + } + } + + print "fast creating $ac_file\n"; + unlink $ac_file; + my $ac_comsub=""; + my $fname=$ac_file_in; + $fname =~ s%.*/%%; + $configure_input="$ac_file. Generated from $fname by config.pl."; + + my $ac_file_inputs; + ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%; + $ac_file_inputs =~ s%:% $ac_given_srcdir/%g; + + patch_file($ac_file, $ac_file_inputs); + ++$created_file_count; +} + +print "config.pl: fast created $created_file_count file(s).\n"; + +sub patch_file { + my ($outf, $infiles) = @_; + my $filedata; + my @infiles=split(' ', $infiles); + my $i=0; + my $name; + + foreach $name (@infiles) { + if (open(CF, "< $name")) { + while (<CF>) { + $filedata .= $_; + } + close(CF); + } else { + print STDERR "can't open $name: $!"."\n"; + } + } + + $filedata =~ s%\@configure_input\@%$configure_input%g; + $filedata =~ s%\@srcdir\@%$srcdir%g; + $filedata =~ s%\@top_srcdir\@%$top_srcdir%g; + $filedata =~ s%\@INSTALL\@%$INSTALL%g; + + if ($bad_perl) { + while ($i <= $#comp_subs) { + my $ref = $comp_subs[$i]; + &$ref(\$filedata); + $i++; + } + } else { + while ($i <= $#comp_match) { + $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g; + $i++; + } + } + open(CF, "> $outf") || die "can't create $outf: $!"; + print CF $filedata; + close(CF); +} + +sub make_closure { + my ($pat, $sub) = @_; + my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%\Q$pat\E%\Q$sub\E%g; }"; + if ($@) { + print "can't create CODE: $@\n"; + } + return $ret; +} diff --git a/admin/config.sub b/admin/config.sub new file mode 100755 index 0000000..2ef2842 --- /dev/null +++ b/admin/config.sub @@ -0,0 +1,1575 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +timestamp='2005-07-01' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to <config-patches@gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches@gnu.org>." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ + kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | ms1 \ + | msp430 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m32c) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | ms1-* \ + | msp430-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + m32c-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* | -skyos*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/admin/configure.in.bot.end b/admin/configure.in.bot.end new file mode 100644 index 0000000..1bc030b --- /dev/null +++ b/admin/configure.in.bot.end @@ -0,0 +1,45 @@ +# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure +if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then + # And if so, warn when they don't match + if test "$kde_libs_prefix" != "$given_prefix"; then + # And if kde doesn't know about the prefix yet + echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null + if test $? -ne 0; then + echo "" + echo "Warning: you chose to install this package in $given_prefix," + echo "but KDE was found in $kde_libs_prefix." + echo "For this to work, you will need to tell KDE about the new prefix, by ensuring" + echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix" + echo "Then restart KDE." + echo "" + fi + fi +fi + +if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then + echo "" + echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility" + echo "was not included. Therefore, GCC symbol visibility support remains disabled." + echo "" + echo "For better performance, consider including the Qt visibility supporting patch" + echo "located at:" + echo "" + echo "http://bugs.kde.org/show_bug.cgi?id=109386" + echo "" + echo "and recompile all of Qt and KDE. Note, this is entirely optional and" + echo "everything will continue to work just fine without it." + echo "" +fi + +if test "$all_tests" = "bad"; then + if test ! "$cache_file" = "/dev/null"; then + echo "" + echo "Please remove the file $cache_file after changing your setup" + echo "so that configure will find the changes next time." + echo "" + fi +else + echo "" + echo "Good - your configure finished. Start make now" + echo "" +fi diff --git a/admin/configure.in.min b/admin/configure.in.min new file mode 100644 index 0000000..0dfe378 --- /dev/null +++ b/admin/configure.in.min @@ -0,0 +1,57 @@ +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +# Original Author was Kalle@kde.org +# I lifted it in some mater. (Stephan Kulow) +# I used much code from Janos Farkas + +dnl Process this file with autoconf to produce a configure script. + +AC_INIT(acinclude.m4) dnl a source file from your sub dir + +dnl This is so we can use kde-common +AC_CONFIG_AUX_DIR(admin) + +dnl This ksh/zsh feature conflicts with `cd blah ; pwd` +unset CDPATH + +dnl Checking host/target/build systems, for make, install etc. +AC_CANONICAL_SYSTEM +dnl Perform program name transformation +AC_ARG_PROGRAM + +dnl Automake doc recommends to do this only here. (Janos) +AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs + +KDE_SET_PREFIX + +dnl generate the config header +AM_CONFIG_HEADER(config.h) dnl at the distribution this done + +dnl Checks for programs. +AC_CHECK_COMPILERS +AC_ENABLE_SHARED(yes) +AC_ENABLE_STATIC(no) +KDE_PROG_LIBTOOL + +dnl for NLS support. Call them in this order! +dnl WITH_NLS is for the po files +AM_KDE_WITH_NLS + +dnl KDE_USE_QT +AC_PATH_KDE diff --git a/admin/cvs.sh b/admin/cvs.sh new file mode 100644 index 0000000..007f069 --- /dev/null +++ b/admin/cvs.sh @@ -0,0 +1,661 @@ +#! /bin/sh +# +# cvs.sh +# +# This file contains support code from Makefile.common +# It defines a shell function for each known target +# and then does a case to call the correct function. + +unset MAKEFLAGS + +call_and_fix_autoconf() +{ + $AUTOCONF || exit 1 + if test -r configure.in.in ; then + perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\ + \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\ + \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\ + \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\ + \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/; s,^#line.*LINENO.*\$,/* \$& */, ;" configure + fi +} + +strip_makefile() +{ + if test ! -f $makefile_wo; then + perl -e '$in=0; while ( <> ) { $in = 1 if ($_ =~ m/^if / ); print $_ unless ($in || $_ =~ m/^include /); $in = 0 if ($_ =~ m/^endif/); }' < $makefile_am > $makefile_wo + fi +} + +check_autotool_versions() +{ +required_autoconf_version="2.53 or newer" +AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1` +case $AUTOCONF_VERSION in + Autoconf*2.5* | autoconf*2.5* | autoconf*2.6* ) : ;; + "" ) + echo "*** AUTOCONF NOT FOUND!." + echo "*** KDE requires autoconf $required_autoconf_version" + exit 1 + ;; + * ) + echo "*** YOU'RE USING $AUTOCONF_VERSION." + echo "*** KDE requires autoconf $required_autoconf_version" + exit 1 + ;; +esac + +AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1` +case $AUTOHEADER_VERSION in + Autoconf*2.5* | autoheader*2.5* | autoheader*2.6* ) : ;; + "" ) + echo "*** AUTOHEADER NOT FOUND!." + echo "*** KDE requires autoheader $required_autoconf_version" + exit 1 + ;; + * ) + echo "*** YOU'RE USING $AUTOHEADER_VERSION." + echo "*** KDE requires autoheader $required_autoconf_version" + exit 1 + ;; +esac + +AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` +required_automake_version="1.6.1 or newer" +case $AUTOMAKE_STRING in + automake*1.5d* | automake*1.5* | automake*1.5-* ) + echo "*** YOU'RE USING $AUTOMAKE_STRING." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; + automake*1.6.* | automake*1.7* | automake*1.8* | automake*1.9* | automake*1.10*) + echo "*** $AUTOMAKE_STRING found." + UNSERMAKE=no + ;; + "" ) + echo "*** AUTOMAKE NOT FOUND!." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; + *unsermake* ) : + echo "*** YOU'RE USING UNSERMAKE." + echo "*** GOOD LUCK!! :)" + UNSERMAKE=unsermake + ;; + * ) + echo "*** YOU'RE USING $AUTOMAKE_STRING." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; +esac +unset required_automake_version +} + +cvs() +{ +check_autotool_versions +acinclude_m4 + +### Make new subdirs and configure.in. +### The make calls could be optimized away here, +### with a little thought. +if test -r configure.in.in; then + rm -f configure.in + echo "*** Creating list of subdirectories" + create_subdirs + + if test -r Makefile.am.in; then + echo "*** Creating Makefile.am" + if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 + else + Makefile_am + fi + fi + configure_files + echo "*** Creating configure.in" + if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 + else + configure_in + fi +fi + +echo "*** Creating aclocal.m4" +$ACLOCAL $ACLOCALFLAGS || exit 1 +echo "*** Creating configure" +call_and_fix_autoconf + +if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then + echo "*** Creating config.h template" + $AUTOHEADER || exit 1 + touch config.h.in +fi + +echo "*** Creating Makefile templates" +$AUTOMAKE || exit 1 + +if test "$UNSERMAKE" = no; then + echo "*** Postprocessing Makefile templates" + perl -w admin/am_edit || exit 1 +fi + +if egrep "^cvs-local:" $makefile_am >/dev/null; then \ + strip_makefile + $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1 +fi + +echo "*** Creating date/time stamp" +touch stamp-h.in + +echo "*** Finished" +echo " Don't forget to run ./configure" +echo " If you haven't done so in a while, run ./configure --help" +} + +dist() +{ +check_autotool_versions + +### +### First build all of the files necessary to do just "make" +### +acinclude_m4 +if test -r configure.in.in; then + rm -f configure.in + create_subdirs + + if test -r Makefile.am.in; then + if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 + else + Makefile_am + fi + fi + configure_files + if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 + else + configure_in + fi +fi +$ACLOCAL $ACLOCALFLAGS +if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then + echo "*** Creating config.h template" + $AUTOHEADER || exit 1 + touch config.h.in +fi +$AUTOMAKE --foreign || exit 1 +if test "$UNSERMAKE" = no; then + echo "*** Postprocessing Makefile templates" + perl -w admin/am_edit || exit 1 +fi +call_and_fix_autoconf +touch stamp-h.in +if grep "^cvs-local:" $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo cvs-local top_srcdir=. +fi + +### +### Then make messages +### +if test -d po; then + LIST=`find ./po -name "*.po"` + for i in $LIST; do + file2=`echo $i | sed -e "s#\.po#\.gmo#"` + msgfmt -o $file2 $i || touch $file2 + done +fi +if grep "^cvs-dist-local:" $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo cvs-dist-local top_srcdir=. +fi +} + +subdir_dist() +{ +$ACLOCAL $ACLOCALFLAGS +$AUTOHEADER +touch config.h.in +$AUTOMAKE +AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` +case $AUTOMAKE_STRING in + *unsermake* ) : + ;; + *) + perl -w ../admin/am_edit --path=../admin +esac +call_and_fix_autoconf +touch stamp-h.in +} + +configure_in() +{ +rm -f configure.in configure.in.new +kde_use_qt_param= +test -f configure.files || { echo "need configure.files for configure.in"; exit 1; } +list=`fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` +: > configure.in.new +for file in $list; do + echo "dnl =======================================================" >> configure.in.new + echo "dnl FILE: $file" >> configure.in.new + echo "dnl =======================================================" >> configure.in.new + echo "" >> configure.in.new + cat $file >> configure.in.new +done +echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new +if test -f Makefile.am.in; then + subdirs=`cat subdirs` + for dir in $subdirs; do + vdir=`echo $dir | sed -e 's,[-+.@],_,g'` + echo "AM_CONDITIONAL($vdir""_SUBDIR_included, test \"x\$$vdir""_SUBDIR_included\" = xyes)" >> configure.in.new + if test -f "$dir/configure.in"; then + echo "if test \"x\$$vdir""_SUBDIR_included\" = xyes; then " >> configure.in.new + echo " AC_CONFIG_SUBDIRS($dir)" >> configure.in.new + echo "fi" >> configure.in.new + fi + done +fi + +echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new + +if test -f inst-apps; then + topleveldirs=`cat inst-apps` +else + topleveldirs= + for dir in `ls -1d * | sort`; do + if test "$dir" != "debian" && test -d $dir; then + topleveldirs="$topleveldirs $dir" + fi + done +fi + +for topleveldir in $topleveldirs; do + if test -f $topleveldir/configure.in; then + continue + fi + if test -f $topleveldir/Makefile.am; then :; else + continue + fi + + mfs=`find $topleveldir -follow -name Makefile.am -print | fgrep -v "/." | \ + sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'` + for i in $mfs; do + echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new + done +done + +files=`cat configure.files` +list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"` +for file in $list; do + echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new +done + +midfiles=`cat configure.files | fgrep "configure.in.mid"` +test -n "$midfiles" && cat $midfiles >> configure.in.new + +echo "AC_OUTPUT" >> configure.in.new +modulename= +if test -f configure.in.in; then + if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then + kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"` + fi + if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then + line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in` + if test -n "$line"; then + modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` + VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` + fi + sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \ + configure.in.new > configure.in && mv configure.in configure.in.new + fi +fi +if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then + VERSION="\"3.5.8\"" +fi +if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then + modulename=`pwd`; + modulename=`basename $modulename` + esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"` + modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"` + +fi +if test -n "$kde_use_qt_param"; then + sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \ + configure.in.new > configure.in && mv configure.in configure.in.new +fi +sed -e "s#@MODULENAME@#$modulename#" configure.in.new | + sed -e "s#@VERSION@#$VERSION#" > configure.in +botfiles=`cat configure.files | egrep "configure.in.bot"` +test -n "$botfiles" && cat $botfiles >> configure.in +cat $admindir/configure.in.bot.end >> configure.in +rm -f configure.in.new +} + +configure_files() +{ +echo "*** Creating configure.files" +admindir=NO +for i in . .. ../.. ../../..; do + if test -x $i/admin; then admindir=$i/admin; break; fi +done +rm -f configure.files +touch configure.files +if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then + echo $admindir/configure.in.min >> configure.files +fi +test -f configure.in.in && echo configure.in.in >> configure.files +# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs +if test -f inst-apps; then + inst=`cat inst-apps` + list="" + for i in $inst; do + list="$list `find $i/ -follow -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ + sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`" + done +else + list=`find . -follow -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ + sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"` +fi +for i in $list; do if test -f $i && test `dirname $i` != "." ; then + echo $i >> configure.files +fi; done +test -f configure.in.mid && echo configure.in.mid >> configure.files +test -f configure.in.bot && echo configure.in.bot >> configure.files +if test ! -s configure.files; then + echo "There are no files to build a configure. Please check your checkout." + exit 1 +fi +} + +create_subdirs() +{ +if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then + # as many modules contain rules to create subdirs without any + # dependencies make won't create it unless there is no file. + # so we check if that's a dummy rule or one that works + rm -f subdirs.cvs.sh.$$ + if test -f subdirs; then + mv subdirs subdirs.cvs.sh.$$ + fi + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1 + if test -f subdirs.cvs.sh.$$; then + if test -s subdirs; then + rm subdirs.cvs.sh.$$ + else + mv subdirs.cvs.sh.$$ subdirs + fi + fi +else + subdirs +fi +} + +subdirs() +{ +dirs= +idirs= +if test -f inst-apps; then + idirs=`cat inst-apps` +else + idirs=`ls -1 | sort` +fi + +compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` +compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` +for i in $idirs; do + if test -f $i/Makefile.am; then + case " $compilefirst $compilelast " in + *" $i "*) ;; + *) dirs="$dirs $i" + esac + fi +done + +: > ./_SUBDIRS + +for d in $compilefirst; do + echo $d >> ./_SUBDIRS +done + +(for d in $dirs; do + list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` + for s in $list; do + echo $s $d + done + list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` + for s in $list; do + echo $d $s + done + echo $d $d +done ) | tsort >> ./_SUBDIRS + +for d in $compilelast; do + echo $d >> ./_SUBDIRS +done + +if test -r subdirs && cmp -s subdirs _SUBDIRS; then + rm -f _SUBDIRS +fi +test -r _SUBDIRS && mv _SUBDIRS subdirs || true +} + +Makefile_am() +{ +if test -f Makefile.am.in; then + compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` + compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` + + idirs= + dirs= + if test -f inst-apps; then + idirs=`cat inst-apps` + else + idirs=`cat subdirs` + fi + for i in $idirs; do + case " $compilefirst $compilelast " in + *" $i "*) ;; + *) dirs="$dirs $i" + esac + done + + adds=`fgrep '$(top_srcdir)/acinclude.m4:' Makefile.am.in | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir)/,,g'` + if echo "$adds" | fgrep "*" >/dev/null ; then + adds=`ls -d -1 $adds 2>/dev/null` + fgrep -v '$(top_srcdir)/acinclude.m4:' Makefile.am.in > Makefile.am.in.adds + str='$(top_srcdir)/acinclude.m4:' + for add in $adds; do + str="$str \$(top_srcdir)/$add" + done + echo $str >> Makefile.am.in.adds + else + cat Makefile.am.in > Makefile.am.in.adds + fi + + cat Makefile.am.in.adds | \ + sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \ + sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am + echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am + rm Makefile.am.in.adds +fi +} + +acinclude_m4() +{ + echo "*** Creating acinclude.m4" + adds= + if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then + strip_makefile + rm -f acinclude.m4 + adds=`grep '\$(top_srcdir)/acinclude.m4:' $makefile_wo | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir),.,g'` + if echo $adds | fgrep "*" >/dev/null ; then + adds=`ls -d -1 $adds 2>/dev/null` + else + $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 || exit 1 + fi + else + rm -f acinclude.m4 + fi + # if it wasn't created up to now, then we do it better + if test ! -f acinclude.m4; then + cat admin/acinclude.m4.in admin/libtool.m4.in admin/pkg.m4.in $adds > acinclude.m4 + fi +} + +package_merge() +{ +catalogs=$POFILES +for cat in $catalogs; do + msgmerge -o $cat.new $cat $PACKAGE.pot + if test -s $cat.new; then + grep -v "\"POT-Creation" $cat.new > $cat.new.2 + grep -v "\"POT-Creation" $cat >> $cat.new.1 + if diff $cat.new.1 $cat.new.2; then + rm $cat.new + else + mv $cat.new $cat + fi + rm -f $cat.new.1 $cat.new.2 + fi +done +} + +extract_messages() +{ +podir=${podir:-$PWD/po} +files=`find . -name Makefile.am | xargs egrep -l '^messages:' ` +dirs=`for i in $files; do echo \`dirname $i\`; done` +tmpname="$PWD/messages.log" +if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi +if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi +export EXTRACTRC PREPARETIPS + +for subdir in $dirs; do + test -z "$VERBOSE" || echo "Making messages in $subdir" + (cd $subdir + if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then + $EXTRACTRC *.rc *.ui *.kcfg > rc.cpp + else + candidates=`ls -1 *.rc *.ui *.kcfg 2>/dev/null` + if test -n "$candidates"; then + echo "$subdir has *.rc, *.ui or *.kcfg files, but not correct messages line" + fi + fi + if find . -name \*.c\* -o -name \*.h\* | fgrep -v ".svn" | xargs fgrep -s -q KAboutData ; then + echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp + else echo " " > _translatorinfo.cpp + fi + perl -e '$mes=0; while (<STDIN>) { next if (/^(if\s|else\s|endif)/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile + + kdepotpath=${includedir:-`kde-config --expandvars --install include`}/kde.pot + if ! test -f $kdepotpath; then + kdepotpath=`kde-config --expandvars --prefix`/include/kde.pot + fi + + $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" srcdir=. \ + XGETTEXT="${XGETTEXT:-xgettext} --foreign-user -C -ci18n -ki18n -ktr2i18n -kI18N_NOOP -kI18N_NOOP2 -kaliasLocale -x $kdepotpath" messages + exit_code=$? + if test "$exit_code" != 0; then + echo "make exit code: $exit_code" + fi + ) 2>&1 | grep -v '^make\[1\]' > $tmpname + test -s $tmpname && { echo $subdir ; cat "$tmpname"; } + test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp + rm -f $subdir/_translatorinfo.cpp + rm -f $subdir/_transMakefile +done +rm -f $tmpname +} + +package_messages() +{ +rm -rf po.backup +mkdir po.backup + +for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do + egrep -v '^#[^,]' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i + cat po/$i > po.backup/backup_$i + touch -r po/$i po.backup/backup_$i + rm po/$i +done + +extract_messages + +for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do + test -f po/$i || echo "disappeared: $i" +done +for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do + sed -e 's,^"Content-Type: text/plain; charset=CHARSET\\n"$,"Content-Type: text/plain; charset=UTF-8\\n",' po/$i > po/$i.new && mv po/$i.new po/$i + #msgmerge -q -o po/$i po/$i po/$i + egrep -v '^#[^,]' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot + if test -f po.backup/$i && ! cmp -s temp.pot po.backup/$i; then + echo "will update $i" + else + if test -f po.backup/backup_$i; then + test -z "$VERBOSE" || echo "I'm restoring $i" + mv po.backup/backup_$i po/$i + rm po.backup/$i + else + echo "will add $i" + fi + fi +done +rm -f temp.pot +rm -rf po.backup +} + +# Make sure that sorting is always done the same way +LC_ALL=C +export LC_ALL +unset LANG || : +unset LC_CTYPE || : +unset LANGUAGE || : + +unset CDPATH || : +admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'` +test "x$admindir" = "x$0" && admindir=. + +test "x$MAKE" = x && MAKE=make +makefile_am=Makefile.am +makefile_wo=Makefile.am.wo +if test -f Makefile.am.in; then + makefile_am=Makefile.am.in + makefile_wo=Makefile.am.in.wo + rm -f $makefile_wo +fi + +# Call script to find autoconf and friends. Uses eval since the script outputs +# sh-compatible code. +eval `$admindir/detect-autoconf.pl` + +### +### Main +### + +arg=`echo $1 | tr .- __` +case $arg in + cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \ + cvs_clean | package_merge | package_messages | Makefile_am | acinclude_m4 | extract_messages ) $arg ;; + configure ) call_and_fix_autoconf ;; + * ) echo "Usage: cvs.sh <target>" + echo "Target can be one of:" + echo " cvs svn dist" + echo " configure.in configure.files" + echo " package-merge package-messages" + echo "" + echo "Usage: anything but $1" + exit 1 ;; +esac + +if test -f $makefile_wo; then + rm $makefile_wo +fi + +exit 0 diff --git a/admin/debianrules b/admin/debianrules new file mode 100755 index 0000000..25897f2 --- /dev/null +++ b/admin/debianrules @@ -0,0 +1,43 @@ +#!/usr/bin/perl -w + +use Shell qw(mv cp mkdir rm) ; +use File::Find; +use Cwd; + +$origPwd = `pwd`; +chomp $origPwd; + +$kde_prefix = "/usr"; +$sysconfdir = "/etc"; +$kde_includedir = "$kde_prefix/include/kde"; +$infodir = "$kde_prefix/share/info"; +$mandir = "$kde_prefix/share/man"; +$qtdir = "/usr/share/qt3"; + +$kde_cgidir = "$kde_prefix/lib/cgi-bin"; +$kde_confdir = "$sysconfdir/kde3"; +$kde_htmldir = "$kde_prefix/share/doc/kde/HTML"; + +if (defined $ENV{DEB_BUILD_OPTIONS} && + $ENV{DEB_BUILD_OPTIONS} =~ /\bnostrip\b/) { + $enable_debug="--enable-debug=full"; +} else { + $enable_debug="--disable-debug"; +} + +if (@ARGV && $ARGV[0] eq 'echodirs') { + print STDOUT "export kde_prefix=$kde_prefix\n"; + print STDOUT "export sysconfdir=$sysconfdir\n"; + print STDOUT "export kde_includedir=$kde_includedir\n"; + print STDOUT "export infodir=$infodir\n"; + print STDOUT "export mandir=$mandir\n"; + print STDOUT "export qtdir=$qtdir\n"; + + print STDOUT "export kde_cgidir=$kde_cgidir\n"; + print STDOUT "export kde_confdir=$kde_confdir\n"; + print STDOUT "export kde_htmldir=$kde_htmldir\n"; + + print STDOUT "configkde=$enable_debug --disable-rpath --prefix=\$(kde_prefix) --sysconfdir=\$(sysconfdir) --includedir=\$(kde_includedir) --infodir=\$(infodir) --mandir=\$(mandir) --with-qt-dir=\$(qtdir)\n"; + + exit +} diff --git a/admin/depcomp b/admin/depcomp new file mode 100755 index 0000000..04701da --- /dev/null +++ b/admin/depcomp @@ -0,0 +1,530 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2005-07-09.11 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mecanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/admin/deps.am b/admin/deps.am new file mode 100644 index 0000000..e8f5015 --- /dev/null +++ b/admin/deps.am @@ -0,0 +1,19 @@ +$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in $(top_srcdir)/admin/cvs.sh $(top_srcdir)/admin/pkg.m4.in + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh acinclude_m4 + +$(top_srcdir)/configure.in: $(top_srcdir)/subdirs $(top_srcdir)/configure.files $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure_in + +$(top_srcdir)/configure.files: $(top_srcdir)/subdirs $(CONF_FILES) + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure.files $(top_srcdir)/admin/cvs.sh + +$(top_srcdir)/Makefile.am: $(top_srcdir)/Makefile.am.in $(top_srcdir)/subdirs $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh Makefile_am + +$(top_srcdir)/subdirs: $(top_srcdir)/Makefile.am.in $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh subdirs + +# defining default rules for files that may not be present +$(top_srcdir)/Makefile.am.in: +$(CONF_FILES): + diff --git a/admin/detect-autoconf.pl b/admin/detect-autoconf.pl new file mode 100755 index 0000000..1cddc02 --- /dev/null +++ b/admin/detect-autoconf.pl @@ -0,0 +1,175 @@ +#!/usr/bin/env perl + +# Try to locate best version of auto* +# By Michael Pyne <michael.pyne@kdemail.net> +# +# Copyright (c) 2005. +# This code is public domain. You may use it however you like (including +# relicensing). + +# Emulate the 'which' program. +sub which +{ + my $prog = shift; + my @paths = split(/:/, $ENV{'PATH'}); + + for $path (@paths) + { + return "$path/$prog" if -x "$path/$prog"; + } + + return ""; +} + +# Subroutine to determine the highest installed version of the given program, +# searching from the given paths. +sub findBest +{ + my ($program, @paths) = @_; + my $best_version_found = '0'; # Deliberately a string. + my %versions; + my %minimumVersions = ( + 'autoconf' => '2.5', + 'automake' => '1.6', + ); + + # Allow user to use environment variable to override search. + return $ENV{uc $program} if $ENV{uc $program}; + + for $prefix (@paths) + { + @files = glob "$prefix/$program*"; + for $file (@files) + { + # Don't check non-executable scripts. + next unless -x $file; + + ($version) = $file =~ /$prefix\/$program-?(.*)$/; + $version =~ s/-|\.//g; + # Don't check the -wrapper ones + next if $version eq "wrapper"; + + # Special case some programs to make sure it has a minimum version. + if (not $version and exists $minimumVersions{$program}) + { + my $min_version = $minimumVersions{$program}; + my $versionOutput = `$program --version 2>/dev/null | head -n 1`; + + # If we can't run the script to get the version it likely won't work later. + next unless $versionOutput; + + # Use number.number for version (we don't need the excess in general). + ($versionOutput) = ($versionOutput =~ /(\d\.\d)/); + + # Use lt to do lexicographical comparison of strings (which should be + # equivalent and doesn't involve issues with floating point conversions). + if (not $versionOutput or $versionOutput lt $min_version) + { + next; + } + } + + # If no version suffix then use it in favor of a versioned autotool + # since the ever-popular WANT_AUTOFOO should then work (in theory). + return $file unless $version; + + # Emulate 'which', and abort if we've already seen this version. + next if exists $versions{$version}; + + # Save filename of program. + $versions{$version} = $file; + + # Use string comparison so that e.g. 253a will be > 253 but < 254. + if ($version gt $best_version_found) + { + $best_version_found = $version; + } + } + } + + return $versions{$best_version_found}; +} + +# Find an appropriate "which" program for later use by the shell script calling +# us. +sub findWhich +{ + for $candidate ('type -p', 'which', 'type') + { + $test = `$candidate sh 2>/dev/null`; + chomp $test; + + return $candidate if -x $test; + } +} + +# Uses which() to find a program unless the user provided its path in the +# environment (the upper case program name is searched). +sub findProgram +{ + $suffix = ""; # For use if @_ has only one param. + my ($program, $suffix) = @_; + + return $ENV{uc $program} if $ENV{uc $program}; + return which("$program$suffix"); +} + +# SCRIPT STARTS. + +# Search in path. +@paths = split(/:/, $ENV{'PATH'}); + +# Make sure at least /usr/bin and /usr/local/bin are in this search. +unshift @paths, '/usr/local/bin' unless grep $_ eq '/usr/local/bin', @paths; +unshift @paths, '/usr/bin' unless grep $_ eq '/usr/bin', @paths; + +$autoconf = findBest('autoconf', @paths); +($autoconf_suffix) = $autoconf =~ /.*autoconf(.*)$/; + +# Find matching autoconf companions. +$autoheader = findProgram('autoheader', $autoconf_suffix); +$autom4te = findProgram('autom4te', $autoconf_suffix); + +# Get best automake, and look for unsermake to possibly override it. +$automake = findBest('automake', @paths); +$unsermake = ""; +# backward compatible: if $UNSERMAKE points to a path, use it +$unsermake = findProgram('unsermake') if (defined($ENV{'UNSERMAKE'}) and $ENV{'UNSERMAKE'} =~ /\//); +# new compatible: if it says 'yes', use the one from path +$unsermake = which('unsermake') if ($ENV{'UNSERMAKE'} ne 'no'); + +($automake_suffix) = $automake =~ /.*automake(.*)$/; + +# Use unsermake if we found it. +$automake = "$unsermake -c" if $unsermake; + +# Find matching automake companions. +$aclocal = findProgram('aclocal', $automake_suffix); + +$which = findWhich(); + +# Make sure we have all of the needed programs. +for $i (qw'autoconf autoheader autom4te automake aclocal') +{ + unless(${$i}) + { + print "# Unable to find $i!!\n"; + exit 1; + } +} + +# Print results in eval-able form. +print <<EOF; +AUTOCONF="$autoconf" +AUTOHEADER="$autoheader" +AUTOM4TE="$autom4te" + +AUTOMAKE="$automake" +ACLOCAL="$aclocal" + +WHICH="$which" + +export AUTOCONF AUTOHEADER AUTOM4TE AUTOMAKE ACLOCAL WHICH +EOF + +exit 0; diff --git a/admin/doxygen.sh b/admin/doxygen.sh new file mode 100644 index 0000000..3e233d7 --- /dev/null +++ b/admin/doxygen.sh @@ -0,0 +1,883 @@ +#! /bin/sh +# +# doxygen.sh Copyright (C) 2005 by Adriaan de Groot +# Based on some code from Doxyfile.am, among other things. +# License: GPL version 2. +# See file COPYING in kdelibs for details. + +echo "*** doxygen.sh" + +# Recurse handling is a little complicated, since normally +# subdir (given on the command-line) processing doesn't recurse +# but you can force it to do so. +recurse=1 +recurse_given=NO +use_modulename=1 +cleanup=YES + +while test -n "$1" ; do +case "x$1" in +"x--no-cleanup" ) + cleanup=NO + ;; +"x--no-recurse" ) + recurse=0 + recurse_given=YES + ;; +"x--recurse" ) + recurse=1 + recurse_given=YES + ;; +"x--no-modulename" ) + use_modulename=0 + ;; +"x--modulename" ) + use_modulename=1 + ;; +"x--help" ) + echo "doxygen.sh usage:" + echo "doxygen.sh [--no-recurse] [--no-modulename] <srcdir> [<subdir>]" + exit 2 + ;; +x--doxdatadir=* ) + DOXDATA=`echo $1 | sed -e 's+--doxdatadir=++'` + ;; +x--installdir=*) + PREFIX=`echo $1 | sed -e 's+--installdir=++'` + ;; +x--* ) + echo "Unknown option: $1" + exit 1 + ;; +* ) + top_srcdir="$1" + break + ;; +esac +shift +done + + +### Sanity check the mandatory "top srcdir" argument. +if test -z "$top_srcdir" ; then + echo "Usage: doxygen.sh <top_srcdir>" + exit 1 +fi +if test ! -d "$top_srcdir" ; then + echo "top_srcdir ($top_srcdir) is not a directory." + exit 1 +fi + +### Normalize top_srcdir so it is an absolute path. +if expr "x$top_srcdir" : "x/" > /dev/null ; then + # top_srcdir is absolute already + : +else + top_srcdir=`cd "$top_srcdir" 2> /dev/null && pwd` + if test ! -d "$top_srcdir" ; then + echo "top_srcdir ($top_srcdir) is not a directory." + exit 1 + fi +fi + + + +### Sanity check and guess QTDOCDIR. +if test -z "$QTDOCDIR" ; then + if test -z "$QTDIR" ; then + for i in /usr/X11R6/share/doc/qt/html + do + QTDOCDIR="$i" + test -d "$QTDOCDIR" && break + done + else + for i in share/doc/qt/html doc/html + do + QTDOCDIR="$QTDIR/$i" + test -d "$QTDOCDIR" && break + done + fi +fi +if test -z "$QTDOCDIR" || test ! -d "$QTDOCDIR" ; then + if test -z "$QTDOCDIR" ; then + echo "* QTDOCDIR could not be guessed." + else + echo "* QTDOCDIR does not name a directory." + fi + if test -z "$QTDOCTAG" ; then + echo "* QTDOCDIR set to \"\"" + QTDOCDIR="" + else + echo "* But I'll use $QTDOCDIR anyway because of QTDOCTAG." + fi +fi + +### Get the "top srcdir", also its name, and handle the case that subdir "." +### is given (which would be top_srcdir then, so it's equal to none-given +### but no recursion either). +### +# top_srcdir="$1" # Already set by options processing +module_name=`basename "$top_srcdir"` +subdir="$2" +if test "x." = "x$subdir" ; then + subdir="" + if test "x$recurse_given" = "xNO" ; then + recurse=0 + fi +fi +if test "x" != "x$subdir" ; then + # If no recurse option given explicitly, default to + # no recurse when processing subdirs given on the command-line. + if test "x$recurse_given" = "xNO" ; then + recurse=0 + fi +fi + +if test -z "$DOXDATA" || test ! -d "$DOXDATA" ; then + if test -n "$DOXDATA" ; then + echo "* \$DOXDATA is '$DOXDATA' which does not name a directory" + fi + DOXDATA="$top_srcdir/doc/common" +fi + +if test ! -d "$DOXDATA" ; then + echo "* \$DOXDATA does not name a directory ( or is unset ), tried \"$DOXDATA\"" + exit 1 +fi + +if test -n "$PREFIX" && test ! -d "$PREFIX" ; then + echo "* \$PREFIX does not name a directory, tried \"$PREFIX\"" + echo "* \$PREFIX is disabled." + PREFIX="" +fi + +### We need some values from top-level files, which +### are not preserved between invocations of this +### script, so factor it out for easy use. +create_doxyfile_in() +{ + eval `grep 'VERSION="' "$top_srcdir/admin/cvs.sh"` + echo "PROJECT_NUMBER = $VERSION" > Doxyfile.in + grep '^KDE_INIT_DOXYGEN' "$top_srcdir/configure.in.in" | \ + sed -e 's+[^[]*\[\([^]]*\)+PROJECT_NAME = "\1"+' \ + -e 's+].*++' >> Doxyfile.in +} + +apidoxdir="$module_name"-apidocs +test "x$use_modulename" = "x0" && apidoxdir="apidocs" + +### If we're making the top subdir, create the structure +### for the apidox and initialize it. Otherwise, just use the +### structure assumed to be there. +if test -z "$subdir" ; then + if test ! -d "$apidoxdir" ; then + mkdir "$apidoxdir" > /dev/null 2>&1 + fi + cd "$apidoxdir" > /dev/null 2>&1 || { + echo "Cannot create and cd into $apidoxdir" + exit 1 + } + + test -f "Doxyfile.in" || create_doxyfile_in + + # Copy in logos and the like + for i in "favicon.ico" "kde_gear_64.png" + do + cp "$DOXDATA/$i" . > /dev/null 2> /dev/null + done + for i in "$top_srcdir/doc/api/Dox-"*.png + do + T=`basename "$i" | sed -e 's+Dox-++'` + test -f "$i" && cp "$i" "./$T" > /dev/null 2> /dev/null + done + + top_builddir="." + srcdir="$1" + subdir="." +else + cd "$apidoxdir" > /dev/null 2>&1 || { + echo "Cannot cd into $apidoxdir -- maybe you need to" + echo "build the top-level dox first." + exit 1 + } + + if test "x1" = "x$recurse" ; then + # OK, so --recurse was requested + if test ! -f "subdirs.top" ; then + echo "* No subdirs.top available in the $apidoxdir." + echo "* The --recurse option will be ignored." + recurse=0 + fi + fi +fi + +### Read a single line (TODO: support \ continuations) from the Makefile.am. +### Used to extract variable assignments from it. +extract_line() +{ + file="$2" ; test -z "$file" && file="$srcdir/Makefile.am" + pattern=`echo "$1" | tr + .` + grep "^$1" "$file" | \ + sed -e "s+$pattern.*=\s*++" +} + +### Handle the COMPILE_{FIRST,LAST,BEFORE,AFTER} part of Makefile.am +### in the toplevel. Copied from admin/cvs.sh. Licence presumed LGPL). +create_subdirs() +{ +echo "* Sorting top-level subdirs" +dirs= +idirs= +if test -f "$top_srcdir/inst-apps"; then + idirs=`cat "$top_srcdir/"inst-apps` +else + idirs=`cd "$top_srcdir" && ls -1 | sort` +fi + +compilefirst="" +compilelast="" +if test -f "$top_srcdir/"Makefile.am.in ; then + compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' "$top_srcdir/"Makefile.am.in | head -n 1` + compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' "$top_srcdir/"Makefile.am.in | head -n 1` +fi +for i in $idirs; do + if test -f "$top_srcdir/$i"/Makefile.am; then + case " $compilefirst $compilelast " in + *" $i "*) ;; + *) dirs="$dirs $i" + esac + fi +done + +: > ./_SUBDIRS + +for d in $compilefirst; do + echo $d >> ./_SUBDIRS +done + +(for d in $dirs; do + list="" + if test -f "$top_srcdir/"Makefile.am.in ; then + list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" "$top_srcdir/"Makefile.am.in | head -n 1` + fi + for s in $list; do + echo $s $d + done + list="" + if test -f "$top_srcdir/"Makefile.am.in ; then + list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" "$top_srcdir/"Makefile.am.in | head -n 1` + fi + for s in $list; do + echo $d $s + done + echo $d $d +done ) | tsort >> ./_SUBDIRS + +for d in $compilelast; do + echo $d >> ./_SUBDIRS +done + +test -r _SUBDIRS && mv _SUBDIRS subdirs.top || true +} + + +### Add HTML header, footer, CSS tags to Doxyfile. +### Assumes $subdir is set. Argument is a string +### to stick in front of the file if needed. +apidox_htmlfiles() +{ + dox_header="$top_srcdir/doc/api/$1header.html" + dox_footer="$top_srcdir/doc/api/$1footer.html" + dox_css="$top_srcdir/doc/api/doxygen.css" + test -f "$dox_header" || dox_header="$DOXDATA/$1header.html" + test -f "$dox_footer" || dox_footer="$DOXDATA/$1footer.html" + test -f "$dox_css" || dox_css="$DOXDATA/doxygen.css" + + echo "HTML_HEADER = $dox_header" >> "$subdir/Doxyfile" ; \ + echo "HTML_FOOTER = $dox_footer" >> "$subdir/Doxyfile" ; \ + echo "HTML_STYLESHEET = $dox_css" >> "$subdir/Doxyfile" +} + +apidox_specials() +{ + line=`extract_line DOXYGEN_PROJECTNAME "$1"` + test -n "$line" && echo "PROJECT_NAME = \"$line\"" >> "$2" +} + +apidox_local() +{ + for i in "$top_srcdir/doc/api/Doxyfile.local" + do + if test -f "$i" ; then + cat "$i" >> "$subdir/Doxyfile" + break + fi + done +} + +### Post-process HTML files by substituting in the menu files +# +# In non-top directories, both <!-- menu --> and <!-- gmenu --> +# are calculated and replaced. Top directories get an empty <!-- menu --> +# if any. +doxyndex() +{ + # Special case top-level to have an empty MENU. + if test "x$subdir" = "x." ; then + MENU="" + htmldir="." + htmltop="$top_builddir" # Just ., presumably + echo "* Post-processing top-level files" + else + MENU="<ul>" + htmldir="$subdir/html" + htmltop="$top_builddir.." # top_builddir ends with / + echo "* Post-processing files in $htmldir" + + # Build a little PHP file that maps class names to file + # names, for the quick-class-picker functionality. + # (The quick-class-picker is disabled due to styling + # problems in IE & FF). + ( + echo "<?php \$map = array("; \ + for htmlfile in `find $htmldir/ -type f -name "class[A-Z]*.html" | grep -v "\-members.html$"`; do + classname=`echo $htmlfile | sed -e "s,.*/class\\(.*\\).html,\1," -e "s,_1_1,::,g" -e "s,_01, ,g" -e "s,_4,>,g" -e "s+_00+,+g" -e "s+_3+<+g" | tr "[A-Z]" "[a-z]"` + echo " \"$classname\" => \"$htmlfile\"," + done | sort ; \ + echo ") ?>" + ) > "$subdir/classmap.inc" + + # This is a list of pairs, with / separators so we can use + # basename and dirname (a crude shell hack) to split them + # into parts. For each, if the file part exists (as a html + # file) tack it onto the MENU variable as a <li> with link. + for i in "Main Page/index" \ + "Modules/modules" \ + "Namespace List/namespaces" \ + "Class Hierarchy/hierarchy" \ + "Alphabetical List/classes" \ + "Class List/annotated" \ + "File List/files" \ + "Directories/dirs" \ + "Namespace Members/namespacemembers" \ + "Class Members/functions" \ + "Related Pages/pages" + do + NAME=`dirname "$i"` + FILE=`basename "$i"` + test -f "$htmldir/$FILE.html" && MENU="$MENU<li><a href=\"$FILE.html\">$NAME</a></li>" + done + + MENU="$MENU</ul>" + fi + + + # Get the list of global Menu entries. + GMENU=`cat subdirs | tr -d '\n'` + + PMENU=`grep '<!-- pmenu' "$htmldir/index.html" | sed -e 's+.*pmenu *++' -e 's+ *-->++' | awk '{ c=split($0,a,"/"); for (j=1; j<=c; j++) { printf " / <a href=\""; if (j==c) { printf("."); } for (k=j; k<c; k++) { printf "../"; } if (j<c) { printf("../html/index.html"); } printf "\">%s</a>\n" , a[j]; } }' | tr -d '\n'` + + # Map the PHP file into HTML options so that + # it can be substituted in for the quick-class-picker. + CMENU="" + # For now, leave the CMENU disabled + CMENUBEGIN="<!--" + CMENUEND="-->" + + if test "x$subdir" = "x." ; then + # Disable CMENU on toplevel anyway + CMENUBEGIN="<!--" + CMENUEND="-->" + else + test -f "$subdir/classmap.inc" && \ + CMENU=`grep '=>' "$subdir/classmap.inc" | sed -e 's+"\([^"]*\)" => "'"$subdir/html/"'\([^"]*\)"+<option value="\2">\1<\/option>+' | tr -d '\n'` + + if test -f "$subdir/classmap.inc" && grep "=>" "$subdir/classmap.inc" > /dev/null 2>&1 ; then + # Keep the menu, it's useful + : + else + CMENUBEGIN="<!--" + CMENUEND="-->" + fi + fi + + # Now substitute in the MENU in every file. This depends + # on HTML_HEADER (ie. header.html) containing the + # <!-- menu --> comment. + for i in "$htmldir"/*.html + do + if test -f "$i" ; then + sed -e "s+<!-- menu -->+$MENU+" \ + -e "s+<!-- gmenu -->+$GMENU+" \ + -e "s+<!-- pmenu.*-->+$PMENU+" \ + -e "s+<!-- cmenu.begin -->+$CMENUBEGIN+" \ + -e "s+<!-- cmenu.end -->+$CMENUEND+" \ + < "$i" | sed -e "s+@topdir@+$htmltop+g" > "$i.new" && mv "$i.new" "$i" + sed -e "s+<!-- cmenu -->+$CMENU+" < "$i" > "$i.new" + test -s "$i.new" && mv "$i.new" "$i" + fi + done +} + + + + + + +### Handle the Doxygen processing of a toplevel directory. +apidox_toplevel() +{ + echo "" + echo "*** Creating API documentation main page for $module_name" + echo "*" + rm -f "Doxyfile" + for i in "$top_srcdir/doc/api/Doxyfile.global" \ + "$top_srcdir/admin/Doxyfile.global" \ + "$DOXDATA/Doxyfile.global" + do + if test -f "$i" ; then + cp "$i" Doxyfile + break + fi + done + + if test ! -f "Doxyfile" ; then + echo "* Cannot create Doxyfile." + exit 1 + fi + + cat "$top_builddir/Doxyfile.in" >> Doxyfile + + + echo "INPUT = $top_srcdir" >> Doxyfile + echo "OUTPUT_DIRECTORY = $top_builddir" >> Doxyfile ; \ + echo "FILE_PATTERNS = *.dox" >> Doxyfile ; \ + echo "RECURSIVE = NO" >> Doxyfile ; \ + echo "ALPHABETICAL_INDEX = NO" >> Doxyfile ; \ + echo "HTML_OUTPUT = ." >> Doxyfile ; \ + apidox_htmlfiles "main" + + # KDevelop has a top-level Makefile.am with settings. + for i in "$top_srcdir/Makefile.am.in" "$top_srcdir/Makefile.am" + do + if test -f "$i" ; then + grep '^DOXYGEN_SET_' "$i" | \ + sed -e 's+DOXYGEN_SET_++' -e "s+@topdir@+$top_srcdir+" >> Doxyfile + apidox_specials "$srcdir/Makefile.am" "$subdir/Doxyfile" + + break + fi + done + + apidox_local + + doxygen Doxyfile + + ( cd "$top_srcdir" && grep -l '^include.*Doxyfile.am' `find . -name Makefile.am` ) | sed -e 's+/Makefile.am$++' -e 's+^\./++' | sort > subdirs.in + for i in `cat subdirs.in` + do + test "x." = "x$i" && continue; + + dir=`dirname "$i"` + file=`basename "$i"` + if test "x." = "x$dir" ; then + dir="" + else + dir="$dir/" + fi + indent=`echo "$dir" | sed -e 's+[^/]*/+\ \ +g' | sed -e 's+&+\\\&+g'` + entryname=`extract_line DOXYGEN_SET_PROJECT_NAME "$top_srcdir/$dir/$file/Makefile.am"` + test -z "$entryname" && entryname="$file" + + if grep DOXYGEN_EMPTY "$top_srcdir/$dir/$file/Makefile.am" > /dev/null 2>&1 ; then + echo "<li>$indent$file</li>" + else + echo "<li>$indent<a href=\"@topdir@/$dir$file/html/index.html\">$entryname</a></li>" + fi + done > subdirs + + doxyndex +} + +### Handle the Doxygen processing of a non-toplevel directory. +apidox_subdir() +{ + echo "" + echo "*** Creating apidox in $subdir" + echo "*" + rm -f "$subdir/Doxyfile" + if test ! -d "$top_srcdir/$subdir" ; then + echo "* No source (sub)directory $subdir" + return + fi + for i in "$top_srcdir/doc/api/Doxyfile.global" \ + "$top_srcdir/admin/Doxyfile.global" \ + "$DOXDATA/Doxyfile.global" + do + if test -f "$i" ; then + cp "$i" "$subdir/Doxyfile" + break + fi + done + + + test -f "Doxyfile.in" || create_doxyfile_in + cat "Doxyfile.in" >> "$subdir/Doxyfile" + + echo "PROJECT_NAME = \"$subdir\"" >> "$subdir/Doxyfile" + echo "INPUT = $srcdir" >> "$subdir/Doxyfile" + echo "OUTPUT_DIRECTORY = ." >> "$subdir/Doxyfile" + if grep -l "$subdir/" subdirs.in > /dev/null 2>&1 ; then + echo "RECURSIVE = NO" >> "$subdir/Doxyfile" + fi + echo "HTML_OUTPUT = $subdir/html" >> "$subdir/Doxyfile" + echo "GENERATE_TAGFILE = $subdir/$subdirname.tag" >> "$subdir/Doxyfile" + test -d "$top_srcdir/doc/api" && \ + echo "IMAGE_PATH = $top_srcdir/doc/api" >> "$subdir/Doxyfile" + + apidox_htmlfiles "" + + # Makefile.ams may contain overrides to our settings, + # so copy them in. + grep '^DOXYGEN_SET_' "$srcdir/Makefile.am" | \ + sed -e 's+DOXYGEN_SET_++' >> "$subdir/Doxyfile" + apidox_specials "$srcdir/Makefile.am" "$subdir/Doxyfile" + + excludes=`extract_line DOXYGEN_EXCLUDE` + if test -n "$excludes"; then + patterns="" + dirs="" + for item in `echo "$excludes"`; do + if test -d "$top_srcdir/$subdir/$item"; then + dirs="$dirs $top_srcdir/$subdir/$item/" + else + patterns="$patterns $item" + fi + done + echo "EXCLUDE_PATTERNS += $patterns" >> "$subdir/Doxyfile" + echo "EXCLUDE += $dirs" >> "$subdir/Doxyfile" + fi + + echo "TAGFILES = \\" >> "$subdir/Doxyfile" + ## For now, don't support \ continued references lines + tags=`extract_line DOXYGEN_REFERENCES` + for i in $tags qt ; do + tagsubdir=`dirname $i` ; tag=`basename $i` + tagpath="" + not_found="" + + if test "x$tagsubdir" = "x." ; then + tagsubdir="" + else + tagsubdir="$tagsubdir/" + fi + + # Find location of tag file + if test -f "$tagsubdir$tag/$tag.tag" ; then + file="$tagsubdir$tag/$tag.tag" + loc="$tagsubdir$tag/html" + else + # This checks for dox built with_out_ --no-modulename + # in the same build dir as this dox run was started in. + file=`ls -1 ../*-apidocs/"$tagsubdir$tag/$tag.tag" 2> /dev/null` + + if test -n "$file" ; then + loc=`echo "$file" | sed -e "s/$tag.tag\$/html/"` + else + # If the tag file doesn't exist yet, but should + # because we have the right dirs here, queue + # this directory for re-processing later. + if test -d "$top_srcdir/$tagsubdir$tag" ; then + echo "* Need to re-process $subdir for tag $i" + echo "$subdir" >> "subdirs.later" + else + # Re-check in $PREFIX if needed. + test -n "$PREFIX" && \ + file=`cd "$PREFIX" && \ + ls -1 *-apidocs/"$tagsubdir$tag/$tag.tag" 2> /dev/null` + + # If something is found, patch it up. The location must be + # relative to the installed location of the dox and the + # file must be absolute. + if test -n "$file" ; then + loc=`echo "../$file" | sed -e "s/$tag.tag\$/html/"` + file="$PREFIX/$file" + echo "* Tags for $tagsubdir$tag will only work when installed." + not_found="YES" + fi + fi + fi + fi + if test "$tag" = "qt" ; then + if test -z "$QTDOCDIR" ; then + echo " $file" >> "$subdir/Doxyfile" + else + if test -z "$file" ; then + # Really no Qt tags + echo "" >> "$subdir/Doxyfile" + else + echo " $file=$QTDOCDIR" >> "$subdir/Doxyfile" + fi + fi + else + if test -n "$file" ; then + test -z "$not_found" && echo "* Found tag $file" + echo " $file=../$top_builddir$loc \\" >> "$subdir/Doxyfile" + fi + fi + done + + apidox_local + + if grep '^DOXYGEN_EMPTY' "$srcdir/Makefile.am" > /dev/null 2>&1 ; then + # This directory is empty, so don't process it, but + # *do* handle subdirs that might have dox. + : + else + # Regular processing + doxygen "$subdir/Doxyfile" + doxyndex + fi +} + +### Run a given subdir by setting up global variables first. +do_subdir() +{ + subdir=`echo "$1" | sed -e 's+/$++'` + srcdir="$top_srcdir/$subdir" + subdirname=`basename "$subdir"` + mkdir -p "$subdir" 2> /dev/null + if test ! -d "$subdir" ; then + echo "Can't create dox subdirectory $subdir" + return + fi + top_builddir=`echo "/$subdir" | sed -e 's+/[^/]*+../+g'` + apidox_subdir +} + + +### Create installdox-slow in the toplevel +create_installdox() +{ +# Fix up the installdox script so it accepts empty args +# +# This code is copied from the installdox generated by Doxygen, +# copyright by Dimitri van Heesch and released under the GPL. +# This does a _slow_ update of the dox, because it loops +# over the given substitutions instead of assuming all the +# needed ones are given. +# +cat <<\EOF +#! /usr/bin/env perl + +%subst = () ; +$quiet = 0; + +if (open(F,"search.cfg")) +{ + $_=<F> ; s/[ \t\n]*$//g ; $subst{"_doc"} = $_; + $_=<F> ; s/[ \t\n]*$//g ; $subst{"_cgi"} = $_; +} + +while ( @ARGV ) { + $_ = shift @ARGV; + if ( s/^-// ) { + if ( /^l(.*)/ ) { + $v = ($1 eq "") ? shift @ARGV : $1; + ($v =~ /\/$/) || ($v .= "/"); + $_ = $v; + if ( /(.+)\@(.+)/ ) { + $subst{$1} = $2; + } else { + print STDERR "Argument $_ is invalid for option -l\n"; + &usage(); + } + } + elsif ( /^q/ ) { + $quiet = 1; + } + elsif ( /^\?|^h/ ) { + &usage(); + } + else { + print STDERR "Illegal option -$_\n"; + &usage(); + } + } + else { + push (@files, $_ ); + } +} + + +if ( ! @files ) { + if (opendir(D,".")) { + foreach $file ( readdir(D) ) { + $match = ".html"; + next if ( $file =~ /^\.\.?$/ ); + ($file =~ /$match/) && (push @files, $file); + ($file =~ "tree.js") && (push @files, $file); + } + closedir(D); + } +} + +if ( ! @files ) { + print STDERR "Warning: No input files given and none found!\n"; +} + +foreach $f (@files) +{ + if ( ! $quiet ) { + print "Editing: $f...\n"; + } + $oldf = $f; + $f .= ".bak"; + unless (rename $oldf,$f) { + print STDERR "Error: cannot rename file $oldf\n"; + exit 1; + } + if (open(F,"<$f")) { + unless (open(G,">$oldf")) { + print STDERR "Error: opening file $oldf for writing\n"; + exit 1; + } + if ($oldf ne "tree.js") { + while (<F>) { + foreach $sub (keys %subst) { + s/doxygen\=\"$sub\:([^ \"\t\>\<]*)\" (href|src)=\"\1/doxygen\=\"$sub:$subst{$sub}\" \2=\"$subst{$sub}/g; + print G "$_"; + } + } + } + else { + while (<F>) { + foreach $sub (keys %subst) { + s/\"$sub\:([^ \"\t\>\<]*)\", \"\1/\"$sub:$subst{$sub}\" ,\"$subst{$sub}/g; + print G "$_"; + } + } + } + } + else { + print STDERR "Warning file $f does not exist\n"; + } + unlink $f; +} + +sub usage { + print STDERR "Usage: installdox [options] [html-file [html-file ...]]\n"; + print STDERR "Options:\n"; + print STDERR " -l tagfile\@linkName tag file + URL or directory \n"; + print STDERR " -q Quiet mode\n\n"; + exit 1; +} +EOF +} + +# Do only the subdirs that match the RE passed in as $1 +do_subdirs_re() +{ + RE=`echo "$1" | sed -e 's+/$++'` + + # Here's a queue of dirs to re-process later when + # all the rest have been done already. + > subdirs.later + + # subdirs.top lists _all_ subdirs of top in the order they + # should be handled; subdirs.in lists those dirs that contain + # dox. So the intersection of the two is the ordered list + # of top-level subdirs that contain dox. + # + # subdirs.top also doesn't contain ".", so that special + # case can be ignored in the loop. + + + ( + for i in `grep "^$RE" subdirs.top` + do + if test "x$i" = "x." ; then + continue + fi + # Calculate intersection of this element and the + # set of dox dirs. + if grep "^$i\$" subdirs.in > /dev/null 2>&1 ; then + echo "$i" + mkdir -p "$i" 2> /dev/null + + # Handle the subdirs of this one + for j in `grep "$i/" subdirs.in` + do + echo "$j" + mkdir -p "$j" 2> /dev/null + done + fi + done + + # Now we still need to handle whatever is left + for i in `cat subdirs.in` + do + test -d "$i" || echo "$i" + mkdir -p "$i" 2> /dev/null + done + ) > subdirs.sort + for i in `cat subdirs.sort` + do + do_subdir "$i" + done + + if test -s "subdirs.later" ; then + sort subdirs.later | uniq > subdirs.sort + for i in `cat subdirs.sort` + do + : > subdirs.later + echo "*** Reprocessing $i" + do_subdir "$i" + test -s "subdirs.later" && echo "* Some tag files were still not found." + done + fi +} + +if test "x." = "x$top_builddir" ; then + apidox_toplevel + create_subdirs + create_installdox > installdox-slow + if test "x$recurse" = "x1" ; then + if test "x$module_name" = "xkdelibs" ; then + if test -z "$QTDOCTAG" && test -d "$QTDOCDIR" && \ + test ! -f "qt/qt.tag" ; then + # Special case: create a qt tag file. + echo "*** Creating a tag file for the Qt library:" + mkdir qt + doxytag -t qt/qt.tag "$QTDOCDIR" > /dev/null 2>&1 + fi + fi + if test -n "$QTDOCTAG" && test -r "$QTDOCTAG" ; then + echo "*** Copying tag file for the Qt library:" + mkdir qt + cp "$QTDOCTAG" qt/qt.tag + fi + + do_subdirs_re "." + + fi +else + if test "x$recurse" = "x1" ; then + do_subdirs_re "$subdir" + else + do_subdir "$subdir" + fi +fi + + +# At the end of a run, clean up stuff. +if test "YES" = "$cleanup" ; then + rm -f subdirs.in subdirs.later subdirs.sort subdirs.top Doxyfile.in + rm -f `find . -name Doxyfile` + rm -f qt/qt.tag + rmdir qt > /dev/null 2>&1 +fi + + +exit 0 + diff --git a/admin/install-sh b/admin/install-sh new file mode 100755 index 0000000..0ae12c0 --- /dev/null +++ b/admin/install-sh @@ -0,0 +1,401 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2005-11-07.23 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +posix_glob= +posix_mkdir= + +# Symbolic mode for testing mkdir with directories. +# It is the same as 755, but also tests that "u+" works. +test_mode=u=rwx,g=rx,o=rx,u+wx + +# Desired mode of installed file. +mode=0755 + +# Desired mode of newly created intermediate directories. +# It is empty if not known yet. +intermediate_mode= + +chmodcmd=$chmodprog +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac +done + +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15 + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + posix_mkdir=false + if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then + posix_mkdir=true + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null + fi ;; + esac + + if + $posix_mkdir && { + + # With -d, create the new directory with the user-specified mode. + # Otherwise, create it using the same intermediate mode that + # mkdir -p would use when creating intermediate directories. + # POSIX says that this mode is "$(umask -S),u+wx", so use that + # if umask -S works. + + if test -n "$dir_arg"; then + mkdir_mode=$mode + else + case $intermediate_mode in + '') + if umask_S=`(umask -S) 2>/dev/null`; then + intermediate_mode=$umask_S,u+wx + else + intermediate_mode=$test_mode + fi ;; + esac + mkdir_mode=$intermediate_mode + fi + + $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" + } + then : + else + + # mkdir does not conform to POSIX, or it failed possibly due to + # a race condition. Create the directory the slow way, step by + # step, checking for races as we go. + + case $dstdir in + /*) pathcomp=/ ;; + -*) pathcomp=./ ;; + *) pathcomp= ;; + esac + + case $posix_glob in + '') + if (set -f) 2>/dev/null; then + posix_glob=true + else + posix_glob=false + fi ;; + esac + + oIFS=$IFS + IFS=/ + $posix_glob && set -f + set fnord $dstdir + shift + $posix_glob && set +f + IFS=$oIFS + + for d + do + test "x$d" = x && continue + + pathcomp=$pathcomp$d + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # Don't fail if two instances are running concurrently. + test -d "$pathcomp" || exit 1 + fi + pathcomp=$pathcomp/ + done + obsolete_mkdir_used=true + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dst"; then + $doit $rmcmd -f "$dst" 2>/dev/null \ + || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ + && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ + || { + echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + } || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/admin/libtool.m4.in b/admin/libtool.m4.in new file mode 100644 index 0000000..7f5eed6 --- /dev/null +++ b/admin/libtool.m4.in @@ -0,0 +1,5891 @@ +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +## Copyright 1996, 1997, 1998, 1999, 2000, 2001 +## Free Software Foundation, Inc. +## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, but +## WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +## General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +## +## As a special exception to the GNU General Public License, if you +## distribute this file as part of a program that contains a +## configuration script generated by Autoconf, you may include it under +## the same distribution terms that you use for the rest of that program. + +# serial 47 AC_PROG_LIBTOOL + + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' +AC_SUBST(LIBTOOL)dnl + +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + + +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +AC_REQUIRE([AC_PROG_NM])dnl + +AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl +dnl + +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR + +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac + +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) + +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP + + +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER + + +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX + + +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +[$]* +EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + LINUX_64_MODE="32" + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + LINUX_64_MODE="64" + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; + ]) +esac + +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + $2=yes + fi + fi + $rm conftest* +]) + +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + testring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ + = "XX$testring") >/dev/null 2>&1 && + new_result=`expr "X$testring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + testring=$testring$testring + done + testring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<EOF +[#line __oline__ "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include <dlfcn.h> +#endif + +#include <stdio.h> + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + # According to Tom Tromey, Ian Lance Taylor reported there are C compilers + # that will create temporary files in the current directory regardless of + # the output directory. Thus, making CWD read-only will cause this test + # to fail, enabling locking or at least warning the user not to do parallel + # builds. + chmod -w . + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . + $rm conftest* out/* + rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib<name>.so + # instead of lib<name>.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + libsuff= + if test "x$LINUX_64_MODE" = x64; then + # Some platforms are per default 64-bit, so there's no /lib64 + if test -d /lib64 -a ! -h /lib64; then + libsuff=64 + fi + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" + sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && test "X$CXX" != "Xno"; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG + else + tagname="" + fi + ;; + + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG + + +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN + + +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 dll's +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL + + +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED + + +# AC_DISABLE_SHARED +# ----------------- +#- set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED + + +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC + + +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC + + +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL + + +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL + + +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE + + +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX + + +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC + + +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in + *GNU* | *'with BFD'*) + test "$with_gnu_ld" != no && break + ;; + *) + test "$with_gnu_ld" != yes && break + ;; + esac + fi + done + IFS="$lt_save_ifs" +else + lt_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$lt_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_PROG_LD_GNU +])# AC_PROG_LD + + +# AC_PROG_LD_GNU +# -------------- +AC_DEFUN([AC_PROG_LD_GNU], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +case `$LD -v 2>&1 </dev/null` in +*GNU* | *'with BFD'*) + lt_cv_prog_gnu_ld=yes + ;; +*) + lt_cv_prog_gnu_ld=no + ;; +esac]) +with_gnu_ld=$lt_cv_prog_gnu_ld +])# AC_PROG_LD_GNU + + +# AC_PROG_LD_RELOAD_FLAG +# ---------------------- +# find reload flag for linker +# -- PORTME Some linkers may need a different reload flag. +AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], +[AC_CACHE_CHECK([for $LD option to reload object files], + lt_cv_ld_reload_flag, + [lt_cv_ld_reload_flag='-r']) +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +])# AC_PROG_LD_RELOAD_FLAG + + +# AC_DEPLIBS_CHECK_METHOD +# ----------------------- +# how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], +[AC_CACHE_CHECK([how to recognise dependent libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + lt_cv_deplibs_check_method=pass_all + ;; + +mingw* | pw32*) + # win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='win32_libid' + ;; + +darwin* | rhapsody*) + # this will be overwritten by pass_all, but leave it in just in case + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[[012]]) + lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | kfreebsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case "$host_cpu" in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + irix5* | nonstopux*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + case $host_cpu in + alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) + lt_cv_deplibs_check_method=pass_all ;; + # the debian people say, arm and glibc 2.3.1 works for them with pass_all + arm* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac + fi + done + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM + + +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM + + +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided and an installed libltdl is not found, it is +# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +# quotes!). If your package is not flat and you're not using automake, +# define top_builddir and top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE + + +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX + + +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + + +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 + + +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ + + +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_RC +# -------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC + + +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + +_LT_AC_SYS_COMPILER + +# +# Check for any special shared library compilation flags. +# +_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' + ;; + esac +fi +if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then + AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) + _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +# Report which librarie types wil actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + darwin* | rhapsody*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG + + +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cc + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + AC_PROG_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # KDE requires run time linking. Make it the default. + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='-qmkshrobj ${wl}-G' + else + shared_flag='-qmkshrobj' + fi + fi + fi + + # Let the compiler handle the export list. + _LT_AC_TAGVAR(always_export_symbols, $1)=no + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case "$host_cpu" in + ia64*|hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc) + # Intel C++ + with_gnu_ld=yes + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + cxx) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sco*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG + +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext <<EOF +int a; +void foo (void) { a = 0; } +EOF +],[$1],[CXX],[cat > conftest.$ac_ext <<EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +EOF +],[$1],[F77],[cat > conftest.$ac_ext <<EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +EOF +],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +EOF +]) +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + # The `*' in the case matches for architectures that use `case' in + # $output_verbose_cmd can trigger glob expansion during the loop + # eval without this substitution. + output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + + for p in `eval $output_verbose_link_cmd`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" \ + || test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then + _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + ;; + + *.$objext|*.$libext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then + _LT_AC_TAGVAR(predep_objects, $1)="$p" + else + _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then + _LT_AC_TAGVAR(postdep_objects, $1)="$p" + else + _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$rm -f confest.$objext + +case " $_LT_AC_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac +])# AC_LIBTOOL_POSTDEP_PREDEP + +# AC_LIBTOOL_LANG_F77_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) +AC_DEFUN([_LT_AC_LANG_F77_CONFIG], +[AC_REQUIRE([AC_PROG_F77]) +AC_LANG_PUSH(Fortran 77) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code=" subroutine t\n return\n end\n" + +# Code to be used in simple link tests +lt_simple_link_test_code=" program t\n end\n" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${F77-"f77"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; +aix4*) + test "$enable_shared" = yes && enable_static=no + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$G77" +_LT_AC_TAGVAR(LD, $1)="$LD" + +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP + + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_F77_CONFIG + + +# AC_LIBTOOL_LANG_GCJ_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) +AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], +[AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${GCJ-"gcj"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_RESTORE +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_GCJ_CONFIG + + +# AC_LIBTOOL_LANG_RC_CONFIG +# -------------------------- +# Ensure that the configuration vars for the Windows resource compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) +AC_DEFUN([_LT_AC_LANG_RC_CONFIG], +[AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${RC-"windres"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_RESTORE +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_RC_CONFIG + + +# AC_LIBTOOL_CONFIG([TAGNAME]) +# ---------------------------- +# If TAGNAME is not passed, then create an initial libtool script +# with a default configuration from the untagged config vars. Otherwise +# add code to config.status for appending the configuration named by +# TAGNAME from the matching tagged config vars. +AC_DEFUN([AC_LIBTOOL_CONFIG], +[# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + _LT_AC_TAGVAR(compiler, $1) \ + _LT_AC_TAGVAR(CC, $1) \ + _LT_AC_TAGVAR(LD, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ + _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ + _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ + _LT_AC_TAGVAR(old_archive_cmds, $1) \ + _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ + _LT_AC_TAGVAR(predep_objects, $1) \ + _LT_AC_TAGVAR(postdep_objects, $1) \ + _LT_AC_TAGVAR(predeps, $1) \ + _LT_AC_TAGVAR(postdeps, $1) \ + _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ + _LT_AC_TAGVAR(archive_cmds, $1) \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ + _LT_AC_TAGVAR(postinstall_cmds, $1) \ + _LT_AC_TAGVAR(postuninstall_cmds, $1) \ + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ + _LT_AC_TAGVAR(allow_undefined_flag, $1) \ + _LT_AC_TAGVAR(no_undefined_flag, $1) \ + _LT_AC_TAGVAR(export_symbols_cmds, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ + _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ + _LT_AC_TAGVAR(hardcode_automatic, $1) \ + _LT_AC_TAGVAR(module_cmds, $1) \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) \ + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ + _LT_AC_TAGVAR(exclude_expsyms, $1) \ + _LT_AC_TAGVAR(include_expsyms, $1); do + + case $var in + _LT_AC_TAGVAR(old_archive_cmds, $1) | \ + _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ + _LT_AC_TAGVAR(archive_cmds, $1) | \ + _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(module_cmds, $1) | \ + _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ + _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\[$]0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` + ;; + esac + +ifelse([$1], [], + [cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" + AC_MSG_NOTICE([creating $ofile])], + [cfgfile="$ofile"]) + + cat <<__EOF__ >> "$cfgfile" +ifelse([$1], [], +[#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext='$shrext' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGISTW]]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat <<EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <<EOF >> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac +]) + + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <<EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach <jrb3@best.com> says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <<EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + + # KDE requires run time linking. Make it the default. + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='-qmkshrobj ${wl}-G' + else + shared_flag='-qmkshrobj' + fi + fi + fi + + # Let the compiler handle the export list. + _LT_AC_TAGVAR(always_export_symbols, $1)=no + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + bsdi4*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes ; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include <windows.h> +# #undef WIN32_LEAN_AND_MEAN +# #include <stdio.h> +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include <cygwin/cygwin_dll.h> +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + + +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) +]) + +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) + +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) +]) diff --git a/admin/ltmain.sh b/admin/ltmain.sh new file mode 100644 index 0000000..27ee8c4 --- /dev/null +++ b/admin/ltmain.sh @@ -0,0 +1,6389 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun configure. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003 +# Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +$* +EOF + exit 0 +fi + +# The name of this program. +progname=`$echo "$0" | ${SED} 's%^.*/%%'` +modename="$progname" + +# Constants. +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.5a +TIMESTAMP=" (1.1240 2003/06/26 06:55:19)" + +default_mode= +help="Try \`$progname --help' for more information." +magic="%%%MAGIC variable%%%" +mkdir="mkdir" +mv="mv -f" +rm="rm -f" + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' +# test EBCDIC or ASCII +case `echo A|tr A '\301'` in + A) # EBCDIC based system + SP2NL="tr '\100' '\n'" + NL2SP="tr '\r\n' '\100\100'" + ;; + *) # Assume ASCII based system + SP2NL="tr '\040' '\012'" + NL2SP="tr '\015\012' '\040\040'" + ;; +esac + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +# We save the old values to restore during execute mode. +if test "${LC_ALL+set}" = set; then + save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL +fi +if test "${LANG+set}" = set; then + save_LANG="$LANG"; LANG=C; export LANG +fi + +# Make sure IFS has a sensible default +: ${IFS=" "} + +if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + $echo "$modename: not configured to build any kind of library" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" + +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +win32_libid () { + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` + if test "X$win32_nmres" = "Ximport" ; then + win32_libid_type="x86 archive import" + else + win32_libid_type="x86 archive static" + fi + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + +# End of Shell function definitions +##################################### + +# Parse our command line options once, thoroughly. +while test "$#" -gt 0 +do + arg="$1" + shift + + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + tag) + tagname="$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit 1 + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; + + --version) + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2003 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit 0 + ;; + + --config) + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0" + done + exit 0 + ;; + + --debug) + $echo "$progname: enabling shell trace mode" + set -x + ;; + + --dry-run | -n) + run=: + ;; + + --features) + $echo "host: $host" + if test "$build_libtool_libs" = yes; then + $echo "enable shared libraries" + else + $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $echo "enable static libraries" + else + $echo "disable static libraries" + fi + exit 0 + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --preserve-dup-deps) duplicate_deps="yes" ;; + + --quiet | --silent) + show=: + ;; + + --tag) prevopt="--tag" prev=tag ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 +fi + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_output= + arg_mode=normal + libobj= + + for arg + do + case "$arg_mode" in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit 1 + fi + arg_mode=target + continue + ;; + + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + base_compile="$base_compile $lastarg" + done # for arg + + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit 1 + ;; + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit 1 + ;; + *) + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + *.java) xform=java ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case $libobj in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit 1 + ;; + esac + + # Infer tagged configuration to use if any are available and + # if one wasn't chosen via the "--tag" command line option. + # Only attempt this if the compiler in the base compile + # command doesn't match the default compiler. + if test -n "$available_tags" && test -z "$tagname"; then + case $base_compile in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" + case "$base_compile " in + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit 1 +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi + + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit 1" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit 1" 1 2 15 + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $run ln "$0" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + $echo $srcfile > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T <<EOF +# $libobj - a libtool object file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# Name of the PIC object. +EOF + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $srcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $srcfile" + fi + + if test ! -d "${xdir}$objdir"; then + $show "$mkdir ${xdir}$objdir" + $run $mkdir ${xdir}$objdir + status=$? + if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then + exit $status + fi + fi + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + command="$command -o $lobj" + fi + + $run $rm "$lobj" "$output_obj" + + $show "$command" + if $run eval "$command"; then : + else + test -n "$output_obj" && $run $rm $removelist + exit 1 + fi + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <<EOF +pic_object='$objdir/$objname' + +EOF + + # Allow error messages only from the first compilation. + suppress_output=' >/dev/null 2>&1' + else + # No PIC object so indicate it doesn't exist in the libtool + # object file. + test -z "$run" && cat >> ${libobj}T <<EOF +pic_object=none + +EOF + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $srcfile" + else + command="$base_compile $srcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + $run $rm "$obj" "$output_obj" + $show "$command" + if $run eval "$command"; then : + else + $run $rm $removelist + exit 1 + fi + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <<EOF +# Name of the non-PIC object. +non_pic_object='$objname' + +EOF + else + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <<EOF +# Name of the non-PIC object. +non_pic_object=none + +EOF + fi + + $run $mv "${libobj}T" "${libobj}" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $run $rm "$lockfile" + fi + + exit 0 + ;; + + # libtool link mode + link | relink) + modename="$modename: link" + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args="$nonopt" + base_compile="$nonopt" + compile_command="$nonopt" + finalize_command="$nonopt" + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + add_flags= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + + avoid_version=no + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -all-static | -static) + if test "X$arg" = "X-all-static"; then + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + fi + build_libtool_libs=no + build_old_libs=yes + prefer_static_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + base_compile="$base_compile $arg" + shift + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit 1 + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat $save_arg` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit 1 + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit 1 + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit 1 + fi + arg=$save_arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit 1 + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit 1 + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit 1 + fi + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-mingw* | *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs System.ltframework" + continue + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # gcc -m* arguments should be passed to the linker via $compiler_flags + # in order to pass architecture information to the linker + # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo + # but this is not reliable with gcc because gcc may use -mfoo to + # select a different linker, different libraries, etc, while + # -Wl,-mfoo simply passes -mfoo to the linker. + -m*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + if test "$with_gcc" = "yes" ; then + compiler_flags="$compiler_flags $arg" + fi + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit 1 + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + -framework) + prev=framework + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + add_flags="$add_flags $arg" + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit 1 + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit 1 + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + add_flags="$add_flags $arg" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Infer tagged configuration to use if any are available and + # if one wasn't chosen via the "--tag" command line option. + # Only attempt this if the compiler in the base link + # command doesn't match the default compiler. + if test -n "$available_tags" && test -z "$tagname"; then + case $base_compile in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" + case $base_compile in + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) + # The compiler in $compile_command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit 1 +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test "$status" -ne 0 && test ! -d "$output_objdir"; then + exit $status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplcations in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit 1 + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + if test "$pass" = conv && test "$allow_undefined" = yes; then + deplibs="$deplib $deplibs" + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + for search_ext in .la $shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + newdependency_libs="$deplib $newdependency_libs" + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + if test "$deplibs_check_method" != pass_all; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." + else + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib'" 1>&2 + exit 1 + fi + + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + case $host in + *-*-darwin*) + # Convert "-framework foo" to "foo.ltframework" in dependency_libs + test -n "$dependency_libs" && dependency_libs=`$echo "X$dependency_libs" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` + ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + tmp_libs= + for deplib in $dependency_libs; do + #echo "Adding $deplib to \$deplibs" + deplibs="$deplib $deplibs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit 1 + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + # This is a shared library + + # Warn about portability, can't link against -module's on some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + eval cmds=\"$extract_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + eval cmds=\"$old_archive_from_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5* ) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against it, someone + # is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="-L$inst_prefix_dir$libdir $add_dir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="-L$inst_prefix_dir$libdir $add_dir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + #if test -n "$dependency_libs" && + # { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || + # test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + #fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + if test "$absdir" != "$libdir"; then + # Sure, some shells/systems don't implement the -ef. + # Those will have to live with the warning. + test "$absdir" -ef "$libdir" > /dev/null 2>&1 || + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="$absdir" + fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + path="" + fi + ;; + *) + path="-L$path" + ;; + esac + + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac + ;; + + *.ltframework) + case $host in + *-*-darwin*) + depdepl="$deplib" + ;; + esac + ;; + + *) continue ;; + esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$deplibs $depdepl" ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$deplibs $path" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval shared_ext=\"$shrext\" + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval shared_ext=\"$shrext\" + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit 1 + else + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$2" + number_minor="$3" + number_revision="$4" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + current=`expr $number_major + $number_minor - 1` + age="$number_minor" + revision="$number_minor" + ;; + esac + ;; + no) + current="$2" + revision="$3" + age="$4" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + *) + $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case $revision in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + *) + $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case $age in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + *) + $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + if test "$age" -gt "$current"; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + irix | nonstopux) + major=`expr $current - $age + 1` + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=.`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + major=`expr $current - $age` + versuffix="-$major" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + fi + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$echo "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *$exeext) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + removelist="$removelist $p" + ;; + *) ;; + esac + done + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` + deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c <<EOF + int main() { return 0; } +EOF + $rm conftest + $LTCC -o conftest conftest.c $deplibs + if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` + for i in $deplibs; do + name="`expr $i : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" -ne "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which I believe you do not have" + $echo "*** because a test_compile did reveal that the linker did not use it for" + $echo "*** its dynamic dependency list that programs get resolved with at runtime." + fi + fi + else + newdeplibs="$newdeplibs $i" + fi + done + else + # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. + for i in $deplibs; do + name="`expr $i : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then + $rm conftest + $LTCC -o conftest conftest.c $i + # Did it work? + if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because a test_compile did reveal that the linker did not use this one" + $echo "*** as a dynamic dependency that programs can get resolved with at runtime." + fi + fi + else + droppeddeps=yes + $echo + $echo "*** Warning! Library $i is needed by this library but I was not able to" + $echo "*** make it link in! You will probably need to install it or some" + $echo "*** library that it depends on before this library will be fully" + $echo "*** functional. Installing it before continuing would be even better." + fi + else + newdeplibs="$newdeplibs $i" + fi + done + fi + ;; + file_magic*) + set dummy $deplibs_check_method + file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name="`expr $a_deplib : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for file magic test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name="`expr $a_deplib : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + done + fi + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo + if test "X$deplibs_check_method" = "Xnone"; then + $echo "*** Warning: inter-library dependencies are not supported in this platform." + else + $echo "*** Warning: inter-library dependencies are not known to be supported." + fi + $echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + dependency_libs=`$echo "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + # Done checking deplibs! + deplibs=$newdeplibs + fi + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + eval cmds=\"$export_symbols_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false + else + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + fi + + # Add all flags from the command line. We here create a library, + # but those flags were only added to compile_command and + # finalize_command, which are only used when creating executables. + # So do it by hand here. + compiler_flags="$compiler_flags $add_flags" + # Only add it to commands which use CC, instead of LD, i.e. + # only to $compiler_flags + #linker_flags="$linker_flags $add_flags" + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval cmds=\"$module_expsym_cmds\" + else + eval cmds=\"$module_cmds\" + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval cmds=\"$archive_expsym_cmds\" + else + eval cmds=\"$archive_cmds\" + fi + fi + + if test "X$skipped_export" != "X:" && len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + delfiles= + last_robj= + k=1 + output=$output_objdir/$save_output-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi + last_robj=$output_objdir/$save_output-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$save_output-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadale object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval cmds=\"$archive_expsym_cmds\" + else + eval cmds=\"$archive_cmds\" + fi + + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~$rm $delfiles\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + exit 0 + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case $output in + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit 1 + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + eval cmds=\"$reload_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit 0 + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $run eval "echo timestamp > $libobj" || exit $? + exit 0 + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + eval cmds=\"$reload_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit 0 + ;; + + prog) + case $host in + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case $dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$output.exp" + $run $rm $export_symbols + $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + else + $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' + $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | + if sort -k 3 </dev/null >/dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{\ +" + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit 1 + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G + # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath. + # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld. + # This does not apply on AIX for ia64, which uses a SysV linker. + case "$host" in + ia64-*-aix5*) ;; + *-*-aix4* | *-*-aix5*) + compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` + finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;; + esac + + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + + exit $status + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit 0 + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $0 --fallback-echo"; then + case $0 in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; + *) qecho="$SHELL `pwd`/$0 --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *) exeext= ;; + esac + case $host in + *mingw* ) + cwrappersource=`$echo ${output_objdir}/lt-${outputname}.c` + cwrapper=`$echo ${output}.exe` + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15 + + cat > $cwrappersource <<EOF + +/* $cwrappersource - temporary wrapper executable for $objdir/$outputname + Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP + + The $output program cannot be directly executed until all the libtool + libraries that it depends on are installed. + + This wrapper executable should never be moved out of the build directory. + If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "/bin/sh $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. +*/ +EOF + cat >> $cwrappersource<<"EOF" +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <malloc.h> +#include <stdarg.h> +#include <assert.h> + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +#define DIR_SEPARATOR '/' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +#define HAVE_DOS_BASED_FILE_SYSTEM +#ifndef DIR_SEPARATOR_2 +#define DIR_SEPARATOR_2 '\\' +#endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +char * basename (const char *name); +char * fnqualify(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup ((char *) basename (argv[0])); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <<EOF + newargz[0] = "$SHELL"; +EOF + + cat >> $cwrappersource <<"EOF" + newargz[1] = fnqualify(argv[0]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; +EOF + + cat >> $cwrappersource <<EOF + execv("$SHELL",newargz); +EOF + + cat >> $cwrappersource <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +char * +basename (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha (name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return (char *) base; +} + +char * +fnqualify(const char *path) +{ + size_t size; + char *p; + char tmp[LT_PATHMAX + 1]; + + assert(path != NULL); + + /* Is it qualified already? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha (path[0]) && path[1] == ':') + return xstrdup (path); +#endif + if (IS_DIR_SEPARATOR (path[0])) + return xstrdup (path); + + /* prepend the current directory */ + /* doesn't handle '~' */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ + p = XMALLOC(char, size); + sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); + return p; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit 1" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" + exit 1 + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ + exec \$progdir\\\\\$program \${1+\"\$@\"} +" + ;; + + *) + # Need to set LD_LIBRARY_PATH, to the value already + # computed within libtool. + $echo >> $output "\ + LD_LIBRARY_PATH=\"$rpath\" exec \$progdir/\$program \${1+\"\$@\"} +" + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit 1 + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" + chmod +x $output + fi + exit 0 + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` + done + fi + + compiler_flags="$compiler_flags $add_flags" + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + eval cmds=\"$old_archive_from_new_cmds\" + else + eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # the command line is too long to link in one step, link in parts + $echo "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + # GNU ar 2.10+ was changed to match POSIX; thus no paths are + # encoded into archives. This makes 'ar r' malfunction in + # this piecewise linking case whenever conflicting object + # names appear in distinct ar calls; check, warn and compensate. + if (for obj in $save_oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 + $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 + AR_FLAGS=cq + fi + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + for obj in $save_oldobjs + do + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~$old_archive_cmds\" + fi + fi + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + # Only create the output if not a dry run. + if test -z "$run"; then + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $echo > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi + done + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac + exit 0 + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg="$nonopt" + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest="$arg" + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) prev="-f" ;; + -g) prev="-g" ;; + -m) prev="-m" ;; + -o) prev="-o" ;; + -s) + stripme=" -s" + continue + ;; + -*) ;; + + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest="$arg" + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit 1 + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + library_names= + old_library= + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit 1 + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + exit 1 + fi + fi + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + eval cmds=\"$postinstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit 0 + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac + # If there is no directory component, then add one. + case $file in + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit 1 + fi + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + relink_command= + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac + # If there is no directory component, then add one. + case $file in + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir="/tmp" + test -n "$TMPDIR" && tmpdir="$TMPDIR" + tmpdir="$tmpdir/libtool-$$" + if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then : + else + $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 + continue + fi + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyways + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; + esac + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + if test -n "$stripme" && test -n "$striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. + eval cmds=\"$old_postinstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $0 --finish$current_libdirs' + else + exit 0 + fi + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + eval cmds=\"$finish_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + exit 0 + + $echo "----------------------------------------------------------------------" + $echo "Libraries have been installed in:" + for libdir in $libdirs; do + $echo " $libdir" + done + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" + fi + if test -n "$runpath_var"; then + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "----------------------------------------------------------------------" + exit 0 + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit 1 + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit 1 + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" + exit 0 + fi + ;; + + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" + rm="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + + if test "$mode" = uninstall; then + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. + fi + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + + # Read the .lo file + . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" \ + && test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + ;; + esac + + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + fi +fi # test -z "$show_help" + +if test -n "$exec_cmd"; then + eval exec $exec_cmd + exit 1 +fi + +# We need to display help for each of the modes. +case $mode in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + --version print version information + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE. + +Report bugs to <bug-libtool@gnu.org>." + exit 0 + ;; + +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo \ +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; +esac + +$echo +$echo "Try \`$modename --help' for more information about other modes." + +exit 0 + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/admin/missing b/admin/missing new file mode 100755 index 0000000..3392b9e --- /dev/null +++ b/admin/missing @@ -0,0 +1,353 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2004-09-07.08 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to <bug-automake@gnu.org>." + exit 0 + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit 0 + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + tar) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/admin/mkinstalldirs b/admin/mkinstalldirs new file mode 100755 index 0000000..259dbfc --- /dev/null +++ b/admin/mkinstalldirs @@ -0,0 +1,158 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy + +scriptversion=2005-06-29.22 + +# Original author: Noah Friedman <friedman@prep.ai.mit.edu> +# Created: 1993-05-16 +# Public domain. +# +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +errstatus=0 +dirmode= + +usage="\ +Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... + +Create each directory DIR (with mode MODE, if specified), including all +leading file name components. + +Report bugs to <bug-automake@gnu.org>." + +# process command line arguments +while test $# -gt 0 ; do + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" + exit $? + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --version) + echo "$0 $scriptversion" + exit $? + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac +done + +for file +do + if test -d "$file"; then + shift + else + break + fi +done + +case $# in + 0) exit 0 ;; +esac + +# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and +# mkdir -p a/c at the same time, both will detect that a is missing, +# one will create a, then the other will try to create a and die with +# a "File exists" error. This is a problem when calling mkinstalldirs +# from a parallel make. We use --version in the probe to restrict +# ourselves to GNU mkdir, which is thread-safe. +case $dirmode in + '') + if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + test -d ./-p && rmdir ./-p + test -d ./--version && rmdir ./--version + fi + ;; + *) + if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && + test ! -d ./--version; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + else + # Clean up after NextStep and OpenStep mkdir. + for d in ./-m ./-p ./--version "./$dirmode"; + do + test -d $d && rmdir $d + done + fi + ;; +esac + +for file +do + case $file in + /*) pathcomp=/ ;; + *) pathcomp= ;; + esac + oIFS=$IFS + IFS=/ + set fnord $file + shift + IFS=$oIFS + + for d + do + test "x$d" = x && continue + + pathcomp=$pathcomp$d + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr= + chmod "$dirmode" "$pathcomp" || lasterr=$? + + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi + + pathcomp=$pathcomp/ + done +done + +exit $errstatus + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/admin/nmcheck b/admin/nmcheck new file mode 100755 index 0000000..1544713 --- /dev/null +++ b/admin/nmcheck @@ -0,0 +1,371 @@ +#!/usr/bin/perl -w + +# Check namespace cleanness of a library. +# Allowed symbols are passed as arguments. +# They may have trailing * = wildcard. +# Wildcards may be also specified as *::* (e.g. K*::* for all KDE classes) +# Symbols are listed as full function unmangled names without arguments, +# e.g. 'foo bar* nspace::*' allows foo(), foo(int), bar(), barbar() +# and all symbols in namespace/class nspace. +# If an argument has comma in it, it's a filename of a file containing +# allowed symbols, one per line. + + +$thisProg = "$0"; # This programs name + +$library = ""; +$allowed_symbols = ""; +$debug = 0; +$allowed_weak = ""; +$weak_specified = 0; + +while( defined( $ARGV[ 0 ] )) +{ + $_ = shift; + if( /^--verbose$|^-v$/ ) + { + $debug = 1; + } + elsif( /^--help$|^-h$/ ) + { + print STDOUT "Usage $thisProg [OPTION] ... library [allowed symbols] ...\n", + "\n", + "Check if the given library has only allowed public symbols.\n", + "\n", + " --allowweak=[symbol] allow only these weak symbols\n", + " -v, --verbose verbosely list files processed\n", + " -h, --help print this help, then exit\n"; + exit 0; + } + elsif( /^--allowweak=(.*)$/ ) + { + $allowed_weak .= " " . $1; + $weak_specified = 1; + } + elsif( /^--allowweak$/ ) # simply list all weak + { + $allowed_weak .= " "; + $weak_specified = 1; + } + elsif( /^--*/ ) + { + die "Invalid argument!\n"; + } + else + { + if( ! $library ) + { + $library = $_; + } + else + { + $allowed_symbols .= " " . $_; + } + } +} + +if( ! $weak_specified ) +{ + $allowed_weak = "*"; + # allow all weak symbols by default + # instances of templates and similar stuff - unfortunately includes also things from other libraries, + # so it cannot be on by default +} + +print STDERR "library:" . $library . "\n" if $debug; +print STDERR "allowed_symbols:" . $allowed_symbols . "\n" if $debug; +print STDERR "allowed_weak:" . $allowed_weak . "\n" if $debug; + +$default_symbols = "_fini _init"; # system symbols +# on my system, every .so has : +# A _DYNAMIC +# A _GLOBAL_OFFSET_TABLE_ +# A __bss_start +# A _edata +# A _end +# T _fini +# T _init +# no need to list A symbols in $default_symbols + +print STDERR "default_symbols: " . $default_symbols . "\n" if $debug; + +print STDOUT "Namespace cleanness check for " . $library . " :\n"; + +$lib_file = ""; +if( $library =~ /\.la$/ ) +{ + # get the real library file from .la + open( FILEIN, $library ) || die "Couldn't open $! !\n"; + while( $line = <FILEIN> ) + { + if( $line =~ /library_names=\'([^ ]*).*/o ) + { + $lib_file = $1; + } + } + close( FILEIN ); + if( ! $lib_file ) + { + print STDERR "Library file not found in .la file!\n"; + exit 1; + } + my $libpath = $library; + $libpath =~ s%[^/]*$%%; + if( -e $libpath . ".libs/" . $lib_file ) + { + $lib_file = $libpath . ".libs/" . $lib_file; + } + else + { + $lib_file = $libpath . $lib_file; + } +} +else +{ + $lib_file = $library; +} + +print STDERR "libfile: ". $lib_file . "\n" if $debug; + +$allowed_symbols .= " " . $default_symbols; + +sub process_symbols($\@\%\@); + +@wildcards = (); +%exacts = (); +@regwildcards = (); +process_symbols( $allowed_symbols, @wildcards, %exacts, @regwildcards ); +@weak_wildcards = (); +%weak_exacts = (); +@weak_regwildcards = (); +process_symbols( $allowed_weak, @weak_wildcards, %weak_exacts, @weak_regwildcards ); + +# grep is for stripping not exported symbols, which don't have address (=first column) +$nm_command = "nm -BDCg " . $lib_file . " | grep -v '^ ' |"; + +# TODO how portable is this nmcheck stuff? + +print STDERR "nm command:" . $nm_command . "\n" if $debug; + +open( FILEIN, $nm_command ) || die "nm command failed\n"; + +my $exit_code = 0; + +while( $line = <FILEIN> ) +{ + my $type; + my $symbol; + if( $line =~ /^[^ ]* (.) (.*)$/o ) + { + $type = $1; + $symbol = $2; + } + else + { + die "Invalid line: " . $line . "\n"; + } + + print STDERR "Type: " . $type . " , symbol: " . $symbol . "\n" if $debug; + if( $type eq "A" ) + { # these should be system symbols, so ignore them + next; + } + + my $orig_symbol = $symbol; + + if( $symbol =~ /\(anonymous namespace\)/o ) + { # TODO tell to prefer named namespaces? (shorter symbols) + next; + } + + # strip prefixes + # the :: appending is to make "CLASS::*" work also for "vtable for CLASS" + $symbol =~ s/^typeinfo for (.*)$/$1::/o; + $symbol =~ s/^typeinfo fn for (.*)$/$1::/o; + $symbol =~ s/^typeinfo name for (.*)$/$1::/o; + $symbol =~ s/^vtable for (.*)$/$1::/o; + $symbol =~ s/^guard variable for (.*)$/$1::/o; + $symbol =~ s/^reference temporary for (.*)$/$1::/o; + $symbol =~ s/^VTT for (.*)$/$1::/o; + $symbol =~ s/^virtual thunk \[[^\]]*\] to (.*)$/$1::/o; + $symbol =~ s/^non-virtual thunk \[[^\]]*\] to (.*)$/$1::/o; + $symbol =~ s/^covariant return thunk \[[^\]]*\] to (.*)$/$1::/o; + $symbol =~ s/^construction vtable thunk for (.*)$/$1::/o; + $symbol =~ s/^construction vtable for .*-in-(.*) [0-9]*$/$1::/o; + + # templates seem to have also return types mangled in their name, and nm prints it too + # they have also template arguments in the symbol + # get rid of both of those + while( $symbol =~ /<.*>/o ) + { + $symbol =~ s/<[^<>]*>//o; # strip innermost <> + } + if( $symbol !~ /operator\(\)/o ) + { + $symbol =~ s/ ?\(.*\).*$//o; # strip () and all after it + } + else + { + $symbol =~ s/(^|:| )operator\(\) ?\(.*\).*$//o; # strip () and all after it + } + $symbol =~ s/\[.*\] *$//o; # strip [in-charge] etc. + if( $symbol =~ /(^|:| )operator /o ) + { + $symbol =~ s/.* ([^\s]*)operator /$1/o; # strip everything before 'X::operator blah' + } + else + { + $symbol =~ s/.* ([^\s]+) *$/$1/o; # get last word (strip return type) + } + + # print STDERR "Processed symbol: " . $symbol . "\n" if $debug; + + my $found = 0; + if( $exacts{ $symbol } ) + { + $found = 1; + } + if( ! $found ) + { + for my $wild ( @wildcards ) + { + if( index( $symbol, $wild ) == 0 ) + { + $found = 1; + last; + } + } + } + if( ! $found ) + { + for my $wild ( @regwildcards ) + { + if( $symbol =~ /^$wild$/ ) + { + $found = 1; + last; + } + } + } + if( ( ! $found ) && ( $type eq "W" || $type eq "V" )) + { + if( $weak_exacts{ $symbol } ) + { + $found = 1; + } + if( ! $found ) + { + for my $wild ( @weak_wildcards ) + { + if( index( $symbol, $wild ) == 0 ) + { + $found = 1; + last; + } + } + } + if( ! $found ) + { + for my $wild ( @weak_regwildcards ) + { + if( $symbol =~ /^$wild$/ ) + { + $found = 1; + last; + } + } + } + } + + if( ! $found ) + { + print STDERR "Public symbol " . $orig_symbol . " is not allowed!\n"; + $exit_code = 1; + } +} + +close( FILEIN ); + +print STDOUT $exit_code == 0 ? "OK\n" : "FAILED\n"; + +exit $exit_code; + +sub process_symbols($\@\%\@) +{ + my $allowed_symbols = $_[ 0 ]; + my $wildcards_ref = $_[ 1 ]; + my $exacts_ref = $_[ 2 ]; + my $regwildcards_ref = $_[ 3 ]; + + $allowed_symbols =~ s/^ *//o; # strip whitespace + $allowed_symbols =~ s/ *$//o; + + if( $allowed_symbols eq "NONE" ) + { + $allowed_symbols = ""; + } + + my @symbols1 = split( ' ', $allowed_symbols ); + my $i = 0; + my @symbols2 = (); + while( defined( $symbols1[ $i ] )) + { + my $symbol = $symbols1[ $i ]; + if( $symbol =~ /\./ ) # dot in name -> file + { + open( SYMIN, $symbol ) || die ( "Cannot open file " . $symbol . "!" ); + while( $line = <SYMIN> ) + { + $line =~ s/^\s*//o; # strip whitespace + $line =~ s/\s*$//o; + if( $line !~ /^$/o # empty line + && $line !~ /^\s*#/ ) # comment line starting with # + { + $symbols2[ $#symbols2 + 1 ] = $line; + } + } + close( SYMIN ); + } + else + { + $symbols2[ $#symbols2 + 1 ] = $symbol; + } + $i++; + } + $i = 0; + while( defined( $symbols2[ $i ] )) + { + my $symbol = $symbols2[ $i ]; + if( $symbol =~ /__/ + || $symbol =~ /^_[A-Z]/ ) + { # ISO C++ 2.10.2 + die "Symbols containing a double underscore or beginning with an underscore and an upper-case letter are reserved!\n"; + } + elsif( $symbol eq "main" + || $symbol eq "main*" ) + { + die "Symbol main is not allowed!\n"; + } + if( $symbol =~ /^([^\*]*)\*$/o # trailing * without any * before it + && $symbol !~ /operator\*$/o ) + { + print STDERR "wildcard:" . $symbol . "\n" if $debug; + $wildcards_ref->[ $#{$wildcards_ref} + 1 ] = $1; + } + elsif( $symbol =~ /\*$/o + && ( $symbol =~ /\*::/o || $symbol =~ /::\*/o ) + && $symbol !~ /^\*/o + && $symbol !~ /operator\*$/o ) + { + print STDERR "regwildcard:" . $symbol . "\n" if $debug; + $symbol =~ s/\*/\.\*/go; # change * to .* (regexp) + $regwildcards_ref->[ $#{$regwildcards_ref} + 1 ] = $symbol; + } + else + { + print STDERR "exact:" . $symbol . "\n" if $debug; + $exacts_ref->{ $symbol } = 1; + } + $i++; + } +} diff --git a/admin/oldinclude.m4.in b/admin/oldinclude.m4.in new file mode 100644 index 0000000..0ed7bcf --- /dev/null +++ b/admin/oldinclude.m4.in @@ -0,0 +1,192 @@ +### -*- autoconf -*- + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) +dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +AC_DEFUN([KDE_CHECK_MICO], +[ +AC_REQUIRE([KDE_CHECK_LIBDL]) +AC_REQUIRE([KDE_MISC_TESTS]) +AC_MSG_CHECKING(for MICO) + +if test -z "$MICODIR"; then + kde_micodir=/usr/local + else + kde_micodir="$MICODIR" +fi + +AC_ARG_WITH(micodir, + [ --with-micodir=micodir where mico is installed ], + kde_micodir=$withval, + kde_micodir=$kde_micodir +) + +AC_CACHE_VAL(kde_cv_mico_incdir, +[ + mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes" +AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir) + +]) +kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'` + +if test ! -r $kde_micodir/include/CORBA.h; then + AC_MSG_ERROR([No CORBA.h found, specify another micodir]) +fi + +AC_MSG_RESULT($kde_micodir) + +MICO_INCLUDES=-I$kde_micodir/include +AC_SUBST(MICO_INCLUDES) +MICO_LDFLAGS=-L$kde_micodir/lib +AC_SUBST(MICO_LDFLAGS) +micodir=$kde_micodir +AC_SUBST(micodir) + +AC_MSG_CHECKING([for MICO version]) +AC_CACHE_VAL(kde_cv_mico_version, +[ +AC_LANG_C +cat >conftest.$ac_ext <<EOF +#include <stdio.h> +#include <mico/version.h> +int main() { + + printf("MICO_VERSION=%s\n",MICO_VERSION); + return (0); +} +EOF +ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest' +if AC_TRY_EVAL(ac_compile); then + if eval `./conftest 2>&5`; then + kde_cv_mico_version=$MICO_VERSION + else + AC_MSG_ERROR([your system is not able to execute a small application to + find MICO version! Check $kde_micodir/include/mico/version.h]) + fi +else + AC_MSG_ERROR([your system is not able to compile a small application to + find MICO version! Check $kde_micodir/include/mico/version.h]) +fi +]) + +dnl installed MICO version +mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` +mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` +mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` + +if test "x$1" = "x"; then + req_version="2.3.0" +else + req_version=$1 +fi + +dnl required MICO version +req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` +req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` +req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` + +if test "$mico_v_maj" -lt "$req_v_maj" || \ + ( test "$mico_v_maj" -eq "$req_v_maj" && \ + test "$mico_v_mid" -lt "$req_v_mid" ) || \ + ( test "$mico_v_mid" -eq "$req_v_mid" && \ + test "$mico_v_min" -lt "$req_v_min" ) + +then + AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \ +at least is required. You should upgrade MICO.]) +else + AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)]) +fi + +LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL" +AC_SUBST(LIBMICO) +if test -z "$IDL"; then + IDL='$(kde_bindir)/cuteidl' +fi +AC_SUBST(IDL) +IDL_DEPENDENCIES='$(kde_includes)/CUTE.h' +AC_SUBST(IDL_DEPENDENCIES) + +idldir="\$(includedir)/idl" +AC_SUBST(idldir) + +]) + +AC_DEFUN([KDE_CHECK_MINI_STL], +[ +AC_REQUIRE([KDE_CHECK_MICO]) + +AC_MSG_CHECKING(if we use mico's mini-STL) +AC_CACHE_VAL(kde_cv_have_mini_stl, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_cxxflags="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $MICO_INCLUDES" +AC_TRY_COMPILE( +[ +#include <mico/config.h> +], +[ +#ifdef HAVE_MINI_STL +#error "nothing" +#endif +], +kde_cv_have_mini_stl=no, +kde_cv_have_mini_stl=yes) +CXXFLAGS="$kde_save_cxxflags" +AC_LANG_RESTORE +]) + +if test "x$kde_cv_have_mini_stl" = "xyes"; then + AC_MSG_RESULT(yes) + $1 +else + AC_MSG_RESULT(no) + $2 +fi +]) + +]) + +AC_DEFUN([KDE_CHECK_ANSI], +[ +]) + +AC_DEFUN([KDE_CHECK_INSURE], +[ + AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]], + [ + if test $enableval = "no"; dnl + then ac_use_insure="no" + else ac_use_insure="yes" + fi + ], [ac_use_insure="no"]) + + AC_MSG_CHECKING(if we will use Insure++ to debug) + AC_MSG_RESULT($ac_use_insure) + if test "$ac_use_insure" = "yes"; dnl + then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "???? + fi +]) + +AC_DEFUN([KDE_CHECK_NEWLIBS], +[ + +]) diff --git a/admin/pkg.m4.in b/admin/pkg.m4.in new file mode 100644 index 0000000..f2bfc2d --- /dev/null +++ b/admin/pkg.m4.in @@ -0,0 +1,57 @@ + +dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not) +dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page +dnl also defines GSTUFF_PKG_ERRORS on error +AC_DEFUN([PKG_CHECK_MODULES], [ + succeeded=no + + if test -z "$PKG_CONFIG"; then + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + fi + + if test "$PKG_CONFIG" = "no" ; then + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + PKG_CONFIG_MIN_VERSION=0.9.0 + if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then + AC_MSG_CHECKING(for $2) + + if $PKG_CONFIG --exists "$2" ; then + AC_MSG_RESULT(yes) + succeeded=yes + + AC_MSG_CHECKING($1_CFLAGS) + $1_CFLAGS=`$PKG_CONFIG --cflags "$2"` + AC_MSG_RESULT($$1_CFLAGS) + + AC_MSG_CHECKING($1_LIBS) + $1_LIBS=`$PKG_CONFIG --libs "$2"` + AC_MSG_RESULT($$1_LIBS) + else + $1_CFLAGS="" + $1_LIBS="" + ## If we have a custom action on failure, don't print errors, but + ## do set a variable so people can do so. + $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + ifelse([$4], ,echo $$1_PKG_ERRORS,) + fi + + AC_SUBST($1_CFLAGS) + AC_SUBST($1_LIBS) + else + echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer." + echo "*** See http://www.freedesktop.org/software/pkgconfig" + fi + fi + + if test $succeeded = yes; then + ifelse([$3], , :, [$3]) + else + ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4]) + fi +]) + + diff --git a/admin/ylwrap b/admin/ylwrap new file mode 100755 index 0000000..102bd89 --- /dev/null +++ b/admin/ylwrap @@ -0,0 +1,223 @@ +#! /bin/sh +# ylwrap - wrapper for lex/yacc invocations. + +scriptversion=2005-05-14.22 + +# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# Written by Tom Tromey <tromey@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +case "$1" in + '') + echo "$0: No files given. Try \`$0 --help' for more information." 1>&2 + exit 1 + ;; + --basedir) + basedir=$2 + shift 2 + ;; + -h|--h*) + cat <<\EOF +Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]... + +Wrapper for lex/yacc invocations, renaming files as desired. + + INPUT is the input file + OUTPUT is one file PROG generates + DESIRED is the file we actually want instead of OUTPUT + PROGRAM is program to run + ARGS are passed to PROG + +Any number of OUTPUT,DESIRED pairs may be used. + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v|--v*) + echo "ylwrap $scriptversion" + exit $? + ;; +esac + + +# The input. +input="$1" +shift +case "$input" in + [\\/]* | ?:[\\/]*) + # Absolute path; do nothing. + ;; + *) + # Relative path. Make it absolute. + input="`pwd`/$input" + ;; +esac + +pairlist= +while test "$#" -ne 0; do + if test "$1" = "--"; then + shift + break + fi + pairlist="$pairlist $1" + shift +done + +# The program to run. +prog="$1" +shift +# Make any relative path in $prog absolute. +case "$prog" in + [\\/]* | ?:[\\/]*) ;; + *[\\/]*) prog="`pwd`/$prog" ;; +esac + +# FIXME: add hostname here for parallel makes that run commands on +# other machines. But that might take us over the 14-char limit. +dirname=ylwrap$$ +trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15 +mkdir $dirname || exit 1 + +cd $dirname + +case $# in + 0) $prog "$input" ;; + *) $prog "$@" "$input" ;; +esac +ret=$? + +if test $ret -eq 0; then + set X $pairlist + shift + first=yes + # Since DOS filename conventions don't allow two dots, + # the DOS version of Bison writes out y_tab.c instead of y.tab.c + # and y_tab.h instead of y.tab.h. Test to see if this is the case. + y_tab_nodot="no" + if test -f y_tab.c || test -f y_tab.h; then + y_tab_nodot="yes" + fi + + # The directory holding the input. + input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'` + # Quote $INPUT_DIR so we can use it in a regexp. + # FIXME: really we should care about more than `.' and `\'. + input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'` + + while test "$#" -ne 0; do + from="$1" + # Handle y_tab.c and y_tab.h output by DOS + if test $y_tab_nodot = "yes"; then + if test $from = "y.tab.c"; then + from="y_tab.c" + else + if test $from = "y.tab.h"; then + from="y_tab.h" + fi + fi + fi + if test -f "$from"; then + # If $2 is an absolute path name, then just use that, + # otherwise prepend `../'. + case "$2" in + [\\/]* | ?:[\\/]*) target="$2";; + *) target="../$2";; + esac + + # We do not want to overwrite a header file if it hasn't + # changed. This avoid useless recompilations. However the + # parser itself (the first file) should always be updated, + # because it is the destination of the .y.c rule in the + # Makefile. Divert the output of all other files to a temporary + # file so we can compare them to existing versions. + if test $first = no; then + realtarget="$target" + target="tmp-`echo $target | sed s/.*[\\/]//g`" + fi + # Edit out `#line' or `#' directives. + # + # We don't want the resulting debug information to point at + # an absolute srcdir; it is better for it to just mention the + # .y file with no path. + # + # We want to use the real output file name, not yy.lex.c for + # instance. + # + # We want the include guards to be adjusted too. + FROM=`echo "$from" | sed \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\ + -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'` + TARGET=`echo "$2" | sed \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\ + -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'` + + sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \ + -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$? + + # Check whether header files must be updated. + if test $first = no; then + if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then + echo "$2" is unchanged + rm -f "$target" + else + echo updating "$2" + mv -f "$target" "$realtarget" + fi + fi + else + # A missing file is only an error for the first file. This + # is a blatant hack to let us support using "yacc -d". If -d + # is not specified, we don't want an error when the header + # file is "missing". + if test $first = yes; then + ret=1 + fi + fi + shift + shift + first=no + done +else + ret=$? +fi + +# Remove the directory. +cd .. +rm -rf $dirname + +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..57b1359 --- /dev/null +++ b/config.h.in @@ -0,0 +1,336 @@ +/* config.h.in. Generated from configure.in by autoheader. */ + +/* Define to 1 if you have the <Carbon/Carbon.h> header file. */ +#undef HAVE_CARBON_CARBON_H + +/* Define if you have the CoreAudio API */ +#undef HAVE_COREAUDIO + +/* Define to 1 if you have the <crt_externs.h> header file. */ +#undef HAVE_CRT_EXTERNS_H + +/* Defines if your system has the crypt function */ +#undef HAVE_CRYPT + +/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'. + */ +#undef HAVE_DIRENT_H + +/* Define to 1 if you have the <dlfcn.h> header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the <fcntl.h> header file. */ +#undef HAVE_FCNTL_H + +/* Define to 1 if you have the <inttypes.h> header file. */ +#undef HAVE_INTTYPES_H + +/* Define if you have libjpeg */ +#undef HAVE_LIBJPEG + +/* Define if you have libpng */ +#undef HAVE_LIBPNG + +/* Define if you have a working libpthread (will enable threaded code) */ +#undef HAVE_LIBPTHREAD + +/* Define if you have libz */ +#undef HAVE_LIBZ + +/* Define to 1 if you have the <memory.h> header file. */ +#undef HAVE_MEMORY_H + +/* Define if you have mkstemps */ +#undef HAVE_MKSTEMPS + +/* Define if you have the mkstemps prototype */ +#undef HAVE_MKSTEMPS_PROTO + +/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */ +#undef HAVE_NDIR_H + +/* Define if your system needs _NSGetEnviron to set up the environment */ +#undef HAVE_NSGETENVIRON + +/* Define to 1 if you have the <paths.h> header file. */ +#undef HAVE_PATHS_H + +/* Define if you have res_init */ +#undef HAVE_RES_INIT + +/* Define if you have the res_init prototype */ +#undef HAVE_RES_INIT_PROTO + +/* Define if you have setenv */ +#undef HAVE_SETENV + +/* Define if you have the setenv prototype */ +#undef HAVE_SETENV_PROTO + +/* Define if you have a STL implementation by SGI */ +#undef HAVE_SGI_STL + +/* Define to 1 if you have the `snprintf' function. */ +#undef HAVE_SNPRINTF + +/* Define to 1 if you have the <stdint.h> header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the <stdlib.h> header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the <strings.h> header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define if you have strlcat */ +#undef HAVE_STRLCAT + +/* Define if you have the strlcat prototype */ +#undef HAVE_STRLCAT_PROTO + +/* Define if you have strlcpy */ +#undef HAVE_STRLCPY + +/* Define if you have the strlcpy prototype */ +#undef HAVE_STRLCPY_PROTO + +/* Define to 1 if you have the <sys/bitypes.h> header file. */ +#undef HAVE_SYS_BITYPES_H + +/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'. + */ +#undef HAVE_SYS_DIR_H + +/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'. + */ +#undef HAVE_SYS_NDIR_H + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the <sys/time.h> header file. */ +#undef HAVE_SYS_TIME_H + +/* Define to 1 if you have the <sys/types.h> header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define if you have unsetenv */ +#undef HAVE_UNSETENV + +/* Define if you have the unsetenv prototype */ +#undef HAVE_UNSETENV_PROTO + +/* Define if you have usleep */ +#undef HAVE_USLEEP + +/* Define if you have the usleep prototype */ +#undef HAVE_USLEEP_PROTO + +/* Define to 1 if you have the `vsnprintf' function. */ +#undef HAVE_VSNPRINTF + +/* Suffix for lib directories */ +#undef KDELIBSUFF + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The size of `char *', as computed by sizeof. */ +#undef SIZEOF_CHAR_P + +/* The size of `int', as computed by sizeof. */ +#undef SIZEOF_INT + +/* The size of `long', as computed by sizeof. */ +#undef SIZEOF_LONG + +/* The size of `short', as computed by sizeof. */ +#undef SIZEOF_SHORT + +/* The size of `size_t', as computed by sizeof. */ +#undef SIZEOF_SIZE_T + +/* The size of `unsigned long', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_LONG + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */ +#undef TIME_WITH_SYS_TIME + +/* Version number of package */ +#undef VERSION + +/* Defined if compiling without arts */ +#undef WITHOUT_ARTS + +/* + * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system + * headers and I'm too lazy to write a configure test as long as only + * unixware is related + */ +#ifdef _UNIXWARE +#define HAVE_BOOLEAN +#endif + + + +/* + * AIX defines FD_SET in terms of bzero, but fails to include <strings.h> + * that defines bzero. + */ + +#if defined(_AIX) +#include <strings.h> +#endif + + + +#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) +# include <sys/time.h> +# include <crt_externs.h> +# define environ (*_NSGetEnviron()) +#endif + + + +#if !defined(HAVE_MKSTEMPS_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +int mkstemps(char *, int); +#ifdef __cplusplus +} +#endif +#endif + + + +#if !defined(HAVE_RES_INIT_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +int res_init(void); +#ifdef __cplusplus +} +#endif +#endif + + + +#if !defined(HAVE_SETENV_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +int setenv (const char *, const char *, int); +#ifdef __cplusplus +} +#endif +#endif + + + +#if !defined(HAVE_STRLCAT_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +unsigned long strlcat(char*, const char*, unsigned long); +#ifdef __cplusplus +} +#endif +#endif + + + +#if !defined(HAVE_STRLCPY_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +unsigned long strlcpy(char*, const char*, unsigned long); +#ifdef __cplusplus +} +#endif +#endif + + + +#if !defined(HAVE_UNSETENV_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +void unsetenv (const char *); +#ifdef __cplusplus +} +#endif +#endif + + + +#if !defined(HAVE_USLEEP_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +int usleep (unsigned int); +#ifdef __cplusplus +} +#endif +#endif + + + +/* + * On HP-UX, the declaration of vsnprintf() is needed every time ! + */ + +#if !defined(HAVE_VSNPRINTF) || defined(hpux) +#if __STDC__ +#include <stdarg.h> +#include <stdlib.h> +#else +#include <varargs.h> +#endif +#ifdef __cplusplus +extern "C" +#endif +int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); +#ifdef __cplusplus +extern "C" +#endif +int snprintf(char *str, size_t n, char const *fmt, ...); +#endif + + + +#if defined(__SVR4) && !defined(__svr4__) +#define __svr4__ 1 +#endif + + +/* type to use in place of socklen_t if not defined */ +#undef kde_socklen_t + +/* type to use in place of socklen_t if not defined (deprecated, use + kde_socklen_t) */ +#undef ksize_t diff --git a/configure.files b/configure.files new file mode 100644 index 0000000..92fb68f --- /dev/null +++ b/configure.files @@ -0,0 +1,4 @@ +./admin/configure.in.min +configure.in.in +./kuickshow/configure.in.bot +./kuickshow/configure.in.in diff --git a/configure.in b/configure.in new file mode 100644 index 0000000..98e984e --- /dev/null +++ b/configure.in @@ -0,0 +1,220 @@ +dnl ======================================================= +dnl FILE: ./admin/configure.in.min +dnl ======================================================= + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +# Original Author was Kalle@kde.org +# I lifted it in some mater. (Stephan Kulow) +# I used much code from Janos Farkas + +dnl Process this file with autoconf to produce a configure script. + +AC_INIT(acinclude.m4) dnl a source file from your sub dir + +dnl This is so we can use kde-common +AC_CONFIG_AUX_DIR(admin) + +dnl This ksh/zsh feature conflicts with `cd blah ; pwd` +unset CDPATH + +dnl Checking host/target/build systems, for make, install etc. +AC_CANONICAL_SYSTEM +dnl Perform program name transformation +AC_ARG_PROGRAM + +dnl Automake doc recommends to do this only here. (Janos) +AM_INIT_AUTOMAKE(kuickshow, "3.5.8") dnl searches for some needed programs + +KDE_SET_PREFIX + +dnl generate the config header +AM_CONFIG_HEADER(config.h) dnl at the distribution this done + +dnl Checks for programs. +AC_CHECK_COMPILERS +AC_ENABLE_SHARED(yes) +AC_ENABLE_STATIC(no) +KDE_PROG_LIBTOOL + +dnl for NLS support. Call them in this order! +dnl WITH_NLS is for the po files +AM_KDE_WITH_NLS + +dnl KDE_USE_QT +AC_PATH_KDE +dnl ======================================================= +dnl FILE: configure.in.in +dnl ======================================================= + +#MIN_CONFIG +DO_NOT_COMPILE="$DO_NOT_COMPILE" + +dnl Checks for header files. +AC_HEADER_DIRENT +AC_HEADER_STDC +AC_CHECK_HEADERS(fcntl.h sys/time.h unistd.h stdlib.h paths.h) +AC_CHECK_SETENV +AC_CHECK_UNSETENV +AC_CHECK_USLEEP +AC_CHECK_MKSTEMPS +dnl Checks for typedefs, structures, and compiler characteristics. +AC_HEADER_TIME + +CXXFLAGS="$CXXFLAGS $KDE_DEFAULT_CXXFLAGS" + +KDE_INIT_DOXYGEN([KDE Graphics API Reference], [Version $VERSION]) +dnl ======================================================= +dnl FILE: ./kuickshow/configure.in.in +dnl ======================================================= + +#MIN_CONFIG + +#dnl PACKAGE set before + +# my own additions to KDE's version +# +# checking for Imlib... + +AC_DEFUN([KDE_FIND_IMLIB_CONFIG], + [AC_MSG_CHECKING([for imlib-config]) + +imlib_config_given=NO +ac_imlib_config="" + +AC_ARG_WITH(imlib-config, +AC_HELP_STRING([--with-imlib-config=DIR],[directory where "imlib-config" is located]), +[ ac_imlib_config="$withval/imlib-config" + imlib_config_given=yes +]) + +if test "$imlib_config_given" = "yes"; then + if test ! -r $ac_imlib_config; then + AC_MSG_RESULT(wrong file specified) + ac_imlib_config="" + else + AC_MSG_RESULT($ac_imlib_config) + LIB_IMLIB=`$ac_imlib_config --libs` + AC_SUBST(LIB_IMLIB) + fi +else + ac_imlib_config=`which imlib-config 2>/dev/null` + if test -z "$ac_imlib_config"; then + AC_MSG_RESULT(no) + else + dummy=`echo "$ac_imlib_config" | grep '/imlib-config'` + if test -z "$dummy"; then + AC_MSG_RESULT(no) + ac_imlib_config="" + else + LIB_IMLIB=`$ac_imlib_config --libs` + IMLIB_CFLAGS=`$ac_imlib_config --cflags` + imlib_config=`echo "$LIB_IMLIB" | grep lImlib` + if test -z "$imlib_config"; then + AC_MSG_RESULT(no) + ac_imlib_config="" + else + AC_SUBST(LIB_IMLIB) + AC_SUBST(IMLIB_CFLAGS) + AC_MSG_RESULT($ac_imlib_config) + fi + fi + fi +fi + +]) + +dnl #### now some kuickshow stuff ### +dnl Check if Imlib is installed properly +KDE_PKG_CHECK_MODULES(IMLIB, imlib >= 1.9.10, + LIB_IMLIB=$IMLIB_LIBS + AC_SUBST(LIB_IMLIB) +, +KDE_FIND_IMLIB_CONFIG +) + +if test -z "$LIB_IMLIB"; then +dnl AC_MSG_ERROR([You need to install Imlib 1.x, e.g. http://freshmeat.net/redir/imlib/4385/url_tgz/imlib-1.9.10.tar.gz if your distributor doesn't have a package]) + DO_NOT_COMPILE="$DO_NOT_COMPILE kuickshow" +fi +KDE_CREATE_SUBDIRSLIST +AM_CONDITIONAL(doc_SUBDIR_included, test "x$doc_SUBDIR_included" = xyes) +AM_CONDITIONAL(kuickshow_SUBDIR_included, test "x$kuickshow_SUBDIR_included" = xyes) +AC_CONFIG_FILES([ Makefile ]) +AC_CONFIG_FILES([ doc/Makefile ]) +AC_CONFIG_FILES([ doc/kuickshow/Makefile ]) +AC_CONFIG_FILES([ kuickshow/Makefile ]) +AC_CONFIG_FILES([ kuickshow/misc/Makefile ]) +AC_CONFIG_FILES([ kuickshow/pics/Makefile ]) +AC_CONFIG_FILES([ kuickshow/src/Makefile ]) +AC_OUTPUT +if test -z "$LIB_IMLIB"; then + echo "" + echo "You're missing Imlib 1.x. The graphics browser/viewer KuickShow" + echo "won't be compiled without Imlib." + echo "You can download it from" + echo "http://freshmeat.net/redir/imlib/4385/url_tgz/imlib-1.9.10.tar.gz" + echo "" + all_tests=bad +fi +# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure +if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then + # And if so, warn when they don't match + if test "$kde_libs_prefix" != "$given_prefix"; then + # And if kde doesn't know about the prefix yet + echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null + if test $? -ne 0; then + echo "" + echo "Warning: you chose to install this package in $given_prefix," + echo "but KDE was found in $kde_libs_prefix." + echo "For this to work, you will need to tell KDE about the new prefix, by ensuring" + echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix" + echo "Then restart KDE." + echo "" + fi + fi +fi + +if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then + echo "" + echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility" + echo "was not included. Therefore, GCC symbol visibility support remains disabled." + echo "" + echo "For better performance, consider including the Qt visibility supporting patch" + echo "located at:" + echo "" + echo "http://bugs.kde.org/show_bug.cgi?id=109386" + echo "" + echo "and recompile all of Qt and KDE. Note, this is entirely optional and" + echo "everything will continue to work just fine without it." + echo "" +fi + +if test "$all_tests" = "bad"; then + if test ! "$cache_file" = "/dev/null"; then + echo "" + echo "Please remove the file $cache_file after changing your setup" + echo "so that configure will find the changes next time." + echo "" + fi +else + echo "" + echo "Good - your configure finished. Start make now" + echo "" +fi diff --git a/configure.in.in b/configure.in.in new file mode 100644 index 0000000..c0c7479 --- /dev/null +++ b/configure.in.in @@ -0,0 +1,17 @@ +#MIN_CONFIG +DO_NOT_COMPILE="$DO_NOT_COMPILE" + +dnl Checks for header files. +AC_HEADER_DIRENT +AC_HEADER_STDC +AC_CHECK_HEADERS(fcntl.h sys/time.h unistd.h stdlib.h paths.h) +AC_CHECK_SETENV +AC_CHECK_UNSETENV +AC_CHECK_USLEEP +AC_CHECK_MKSTEMPS +dnl Checks for typedefs, structures, and compiler characteristics. +AC_HEADER_TIME + +CXXFLAGS="$CXXFLAGS $KDE_DEFAULT_CXXFLAGS" + +KDE_INIT_DOXYGEN([KDE Graphics API Reference], [Version $VERSION]) diff --git a/debian/cdbs/debian-qt-kde.mk b/debian/cdbs/debian-qt-kde.mk new file mode 100644 index 0000000..41c3dd4 --- /dev/null +++ b/debian/cdbs/debian-qt-kde.mk @@ -0,0 +1,108 @@ +ifndef _cdbs_bootstrap +_cdbs_scripts_path ?= /usr/lib/cdbs +_cdbs_rules_path ?= /usr/share/cdbs/1/rules +_cdbs_class_path ?= /usr/share/cdbs/1/class +endif + +ifndef _cdbs_class_debian-qt-kde +_cdbs_class_debian-qt-kde := 1 + +# Note: This _must_ be included before autotools.mk, or it won't work. +common-configure-arch common-configure-indep:: debian/stamp-cvs-make +debian/stamp-cvs-make: + if test -n "$(DEB_KDE_CVS_MAKE)" -a ! -f configure; then \ + $(MAKE) -C $(DEB_SRCDIR) -f admin/Makefile.common dist; \ + fi + touch debian/stamp-cvs-make + +include /usr/share/cdbs/1/class/kde.mk$(_cdbs_makefile_suffix) + +DEB_PATCHDIRS := debian/patches/common debian/patches + +DEB_KDE_ENABLE_FINAL := yes +DEB_INSTALL_DOCS_ALL := + +DEB_DH_MAKESHLIBS_ARGS_ALL := -V +DEB_SHLIBDEPS_INCLUDE = $(foreach p,$(PACKAGES_WITH_LIBS),debian/$(p)/usr/lib) + +ifeq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + cdbs_treat_me_gently_arches := arm m68k alpha ppc64 + ifeq (,$(filter $(DEB_HOST_ARCH_CPU),$(cdbs_treat_me_gently_arches))) + cdbs_kde_enable_final = $(if $(DEB_KDE_ENABLE_FINAL),--enable-final,) + else + cdbs_kde_enable_final = + endif +endif + +common-build-arch:: debian/stamp-man-pages +debian/stamp-man-pages: + if ! test -d debian/man/out; then mkdir -p debian/man/out; fi + for f in $$(find debian/man -name '*.sgml'); do \ + docbook-to-man $$f > debian/man/out/`basename $$f .sgml`.1; \ + done + for f in $$(find debian/man -name '*.man'); do \ + soelim -I debian/man $$f \ + > debian/man/out/`basename $$f .man`.`head -n1 $$f | awk '{print $$NF}'`; \ + done + touch debian/stamp-man-pages + +common-binary-indep:: + ( set -e; \ + tmpf=`mktemp debian/versions.XXXXXX`; \ + perl debian/cdbs/versions.pl >$$tmpf; \ + for p in $(DEB_INDEP_PACKAGES); do \ + cat $$tmpf >>debian/$$p.substvars; \ + done; \ + rm -f $$tmpf ) + +common-binary-arch:: + ( set -e; \ + tmpf=`mktemp debian/versions.XXXXXX`; \ + perl debian/cdbs/versions.pl >$$tmpf; \ + for p in $(DEB_ARCH_PACKAGES); do \ + cat $$tmpf >>debian/$$p.substvars; \ + done; \ + rm -f $$tmpf ) + +clean:: + rm -rf debian/man/out + -rmdir debian/man + rm -f debian/stamp-man-pages + rm -rf debian/shlibs-check + +$(patsubst %,binary-install/%,$(DEB_PACKAGES)) :: binary-install/%: + if test -x /usr/bin/dh_desktop; then dh_desktop -p$(cdbs_curpkg) $(DEB_DH_DESKTOP_ARGS); fi + if test -e debian/$(cdbs_curpkg).lintian; then \ + install -p -D -m644 debian/$(cdbs_curpkg).lintian \ + debian/$(cdbs_curpkg)/usr/share/lintian/overrides/$(cdbs_curpkg); \ + fi + if test -e debian/$(cdbs_curpkg).presubj; then \ + install -p -D -m644 debian/$(cdbs_curpkg).presubj \ + debian/$(cdbs_curpkg)/usr/share/bug/$(cdbs_curpkg)/presubj; \ + fi + +binary-install/$(DEB_SOURCE_PACKAGE)-doc-html:: + set -e; \ + for doc in `cd $(DEB_DESTDIR)/usr/share/doc/kde/HTML/en; find . -name index.docbook`; do \ + pkg=$${doc%/index.docbook}; pkg=$${pkg#./}; \ + echo Building $$pkg HTML docs...; \ + mkdir -p $(CURDIR)/debian/$(DEB_SOURCE_PACKAGE)-doc-html/usr/share/doc/kde/HTML/en/$$pkg; \ + cd $(CURDIR)/debian/$(DEB_SOURCE_PACKAGE)-doc-html/usr/share/doc/kde/HTML/en/$$pkg; \ + /usr/kde3/bin/meinproc $(DEB_DESTDIR)/usr/share/doc/kde/HTML/en/$$pkg/index.docbook; \ + done + for pkg in $(DOC_HTML_PRUNE) ; do \ + rm -rf debian/$(DEB_SOURCE_PACKAGE)-doc-html/usr/share/doc/kde/HTML/en/$$pkg; \ + done + +clean:: + if test -n "$(DEB_KDE_CVS_MAKE)" && test -d $(DEB_SRCDIR); then \ + cd $(DEB_SRCDIR); \ + find . -name Makefile.in -print | \ + xargs --no-run-if-empty rm -f; \ + rm -f Makefile.am acinclude.m4 aclocal.m4 config.h.in \ + configure configure.files configure.in stamp-h.in \ + subdirs; \ + fi + rm -f debian/stamp-cvs-make + +endif diff --git a/debian/cdbs/versions.pl b/debian/cdbs/versions.pl new file mode 100644 index 0000000..9ce11d8 --- /dev/null +++ b/debian/cdbs/versions.pl @@ -0,0 +1,19 @@ +#!/usr/bin/env perl + +use strict; +use warnings; + +my $version = `dpkg-parsechangelog | awk '/^Version/ {print \$2}'`; +my ($version3, $version3_next); +my ($version2, $version2_next); + +($version3 = $version) =~ s/-[^-]+$//; +($version2 = $version3) =~ s/\.[^.]+$//; + +($version3_next = $version3) =~ s/(?<=\.)(\d+)[a-z]?$/($1+1)/e; +($version2_next = $version2) =~ s/(?<=\.)(\d+)$/($1+1)/e; + +print "KDE-Version3=$version3\n"; +print "KDE-Version2=$version2\n"; +print "KDE-Next-Version3=$version3_next\n"; +print "KDE-Next-Version2=$version2_next\n"; diff --git a/debian/changelog b/debian/changelog new file mode 100644 index 0000000..46136aa --- /dev/null +++ b/debian/changelog @@ -0,0 +1,42 @@ +kuickshow-kde3 (4:3.5.8-0ubuntu3) karmic; urgency=low + + * Karmic rebuild + + -- Timothy Pearson <kb9vqf@pearsoncomputing.net> Thu, 02 July 2009 16:08:00 -0600 + +kuickshow-kde3 (4:3.5.8-0ubuntu2) intrepid; urgency=low + + * Moved KDE3 to /opt/kde3 + * Integrated properly with KDE4.2+ + + -- Timothy Pearson <kb9vqf@pearsoncomputing.net> Fri, 06 March 2009 01:35:00 -0600 + +kuickshow-kde3 (4:3.5.8-0ubuntu1) intrepid; urgency=low + + * Added -kde3 suffix + + -- Timothy Pearson <kb9vqf@pearsoncomputing.net> Fri, 12 Dec 2008 14:28:00 -0600 + +kuickshow (4:3.5.8-0ubuntu2) hardy; urgency=low + + * No change recompile to build against libgif (not libungif) + + -- Jonathan Riddell <jriddell@ubuntu.com> Mon, 07 Jan 2008 10:26:21 +0000 + +kuickshow (4:3.5.8-0ubuntu1) hardy; urgency=low + + * New upstream release, extracted from kdegraphics 3.5.8 + + -- Jonathan Riddell <jriddell@ubuntu.com> Wed, 14 Nov 2007 17:59:49 +0000 + +kuickshow (4:3.5.7-0ubuntu1) gutsy; urgency=low + + * New upstream release, extracted from kdegraphics 3.5.7 + + -- Jonathan Riddell <jriddell@ubuntu.com> Sun, 03 Jun 2007 14:45:49 +0100 + +kuickshow (4:3.5.6-0ubuntu1) feisty; urgency=low + + * Initial package, separate from kdegraphics due to imlib11 not being in main + + -- Jonathan Riddell <jriddell@ubuntu.com> Wed, 28 Feb 2007 16:29:08 +0000 diff --git a/debian/compat b/debian/compat new file mode 100644 index 0000000..7ed6ff8 --- /dev/null +++ b/debian/compat @@ -0,0 +1 @@ +5 diff --git a/debian/control b/debian/control new file mode 100644 index 0000000..92a84ca --- /dev/null +++ b/debian/control @@ -0,0 +1,24 @@ +Source: kuickshow-kde3 +Section: kde +Priority: optional +Maintainer: Timothy Pearson <kb9vqf@pearsoncomputing.net> +Build-Depends: cdbs (>= 0.4.39-0.1), debhelper (>= 5.0.31), autotools-dev, gawk, kdelibs4-kde3-dev (>= 4:3.5.6), imlib11-dev +Standards-Version: 3.7.2 + +Package: kuickshow-kde3 +Section: graphics +Architecture: any +Depends: ${shlibs:Depends} +Suggests: khelpcenter-kde3 +Description: KDE image/slideshow viewer [KDE3] + KuickShow is an image browser/viewer with a nice filebrowser to + select images to be shown, slideshow support and the ability to + display the following image formats: jpg, gif, tiff, png, bmp, psd, + xpm, xbm, pbm and eim. Images can be displayed either in their own + window, as large as the image, or fullscreen (which shrinks images too + large to display). KuickShow also has a slideshow mode. + . + This package is part of KDE, as a component of the KDE graphics + module. See the 'kde' and 'kdegraphics' packages for more information. + . + Homepage: http://kuickshow.sourceforge.net diff --git a/debian/copyright b/debian/copyright new file mode 100644 index 0000000..2373ec1 --- /dev/null +++ b/debian/copyright @@ -0,0 +1,424 @@ +This package was debianized by Christopher L Cheney <ccheney@debian.org> on +Tue, 16 Apr 2002 22:00:00 -0500. + +It was downloaded from: http://www.kde.org/download + +Upstream Authors: Stephan Kulow <coolo@kde.org> and many others. + + +License: + +All programs are under the GPL. On Debian systems, the complete text of +the GPL license can be found in the /usr/share/common-licenses/GPL file. + +-------------------- + +DocBook Documentation: + + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation; with no Invariant Sections, with no Front-Cover Texts, + and with no Back-Cover Texts. + + A copy of the GNU Free Documentation License (Version 1.2) is + included below. + + + GNU Free Documentation License + Version 1.2, November 2002 + + + Copyright (C) 2000,2001,2002 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301, USA. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + + 0. PREAMBLE + + The purpose of this License is to make a manual, textbook, or other + functional and useful document "free" in the sense of freedom: to + assure everyone the effective freedom to copy and redistribute it, + with or without modifying it, either commercially or noncommercially. + Secondarily, this License preserves for the author and publisher a way + to get credit for their work, while not being considered responsible + for modifications made by others. + + This License is a kind of "copyleft", which means that derivative + works of the document must themselves be free in the same sense. It + complements the GNU General Public License, which is a copyleft + license designed for free software. + + We have designed this License in order to use it for manuals for free + software, because free software needs free documentation: a free + program should come with manuals providing the same freedoms that the + software does. But this License is not limited to software manuals; + it can be used for any textual work, regardless of subject matter or + whether it is published as a printed book. We recommend this License + principally for works whose purpose is instruction or reference. + + + 1. APPLICABILITY AND DEFINITIONS + + This License applies to any manual or other work, in any medium, that + contains a notice placed by the copyright holder saying it can be + distributed under the terms of this License. Such a notice grants a + world-wide, royalty-free license, unlimited in duration, to use that + work under the conditions stated herein. The "Document", below, + refers to any such manual or work. Any member of the public is a + licensee, and is addressed as "you". You accept the license if you + copy, modify or distribute the work in a way requiring permission + under copyright law. + + A "Modified Version" of the Document means any work containing the + Document or a portion of it, either copied verbatim, or with + modifications and/or translated into another language. + + A "Secondary Section" is a named appendix or a front-matter section of + the Document that deals exclusively with the relationship of the + publishers or authors of the Document to the Document's overall subject + (or to related matters) and contains nothing that could fall directly + within that overall subject. (Thus, if the Document is in part a + textbook of mathematics, a Secondary Section may not explain any + mathematics.) The relationship could be a matter of historical + connection with the subject or with related matters, or of legal, + commercial, philosophical, ethical or political position regarding + them. + + The "Invariant Sections" are certain Secondary Sections whose titles + are designated, as being those of Invariant Sections, in the notice + that says that the Document is released under this License. If a + section does not fit the above definition of Secondary then it is not + allowed to be designated as Invariant. The Document may contain zero + Invariant Sections. If the Document does not identify any Invariant + Sections then there are none. + + The "Cover Texts" are certain short passages of text that are listed, + as Front-Cover Texts or Back-Cover Texts, in the notice that says that + the Document is released under this License. A Front-Cover Text may + be at most 5 words, and a Back-Cover Text may be at most 25 words. + + A "Transparent" copy of the Document means a machine-readable copy, + represented in a format whose specification is available to the + general public, that is suitable for revising the document + straightforwardly with generic text editors or (for images composed of + pixels) generic paint programs or (for drawings) some widely available + drawing editor, and that is suitable for input to text formatters or + for automatic translation to a variety of formats suitable for input + to text formatters. A copy made in an otherwise Transparent file + format whose markup, or absence of markup, has been arranged to thwart + or discourage subsequent modification by readers is not Transparent. + An image format is not Transparent if used for any substantial amount + of text. A copy that is not "Transparent" is called "Opaque". + + Examples of suitable formats for Transparent copies include plain + ASCII without markup, Texinfo input format, LaTeX input format, SGML + or XML using a publicly available DTD, and standard-conforming simple + HTML, PostScript or PDF designed for human modification. Examples of + transparent image formats include PNG, XCF and JPG. Opaque formats + include proprietary formats that can be read and edited only by + proprietary word processors, SGML or XML for which the DTD and/or + processing tools are not generally available, and the + machine-generated HTML, PostScript or PDF produced by some word + processors for output purposes only. + + The "Title Page" means, for a printed book, the title page itself, + plus such following pages as are needed to hold, legibly, the material + this License requires to appear in the title page. For works in + formats which do not have any title page as such, "Title Page" means + the text near the most prominent appearance of the work's title, + preceding the beginning of the body of the text. + + A section "Entitled XYZ" means a named subunit of the Document whose + title either is precisely XYZ or contains XYZ in parentheses following + text that translates XYZ in another language. (Here XYZ stands for a + specific section name mentioned below, such as "Acknowledgements", + "Dedications", "Endorsements", or "History".) To "Preserve the Title" + of such a section when you modify the Document means that it remains a + section "Entitled XYZ" according to this definition. + + The Document may include Warranty Disclaimers next to the notice which + states that this License applies to the Document. These Warranty + Disclaimers are considered to be included by reference in this + License, but only as regards disclaiming warranties: any other + implication that these Warranty Disclaimers may have is void and has + no effect on the meaning of this License. + + + 2. VERBATIM COPYING + + You may copy and distribute the Document in any medium, either + commercially or noncommercially, provided that this License, the + copyright notices, and the license notice saying this License applies + to the Document are reproduced in all copies, and that you add no other + conditions whatsoever to those of this License. You may not use + technical measures to obstruct or control the reading or further + copying of the copies you make or distribute. However, you may accept + compensation in exchange for copies. If you distribute a large enough + number of copies you must also follow the conditions in section 3. + + You may also lend copies, under the same conditions stated above, and + you may publicly display copies. + + + 3. COPYING IN QUANTITY + + If you publish printed copies (or copies in media that commonly have + printed covers) of the Document, numbering more than 100, and the + Document's license notice requires Cover Texts, you must enclose the + copies in covers that carry, clearly and legibly, all these Cover + Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on + the back cover. Both covers must also clearly and legibly identify + you as the publisher of these copies. The front cover must present + the full title with all words of the title equally prominent and + visible. You may add other material on the covers in addition. + Copying with changes limited to the covers, as long as they preserve + the title of the Document and satisfy these conditions, can be treated + as verbatim copying in other respects. + + If the required texts for either cover are too voluminous to fit + legibly, you should put the first ones listed (as many as fit + reasonably) on the actual cover, and continue the rest onto adjacent + pages. + + If you publish or distribute Opaque copies of the Document numbering + more than 100, you must either include a machine-readable Transparent + copy along with each Opaque copy, or state in or with each Opaque copy + a computer-network location from which the general network-using + public has access to download using public-standard network protocols + a complete Transparent copy of the Document, free of added material. + If you use the latter option, you must take reasonably prudent steps, + when you begin distribution of Opaque copies in quantity, to ensure + that this Transparent copy will remain thus accessible at the stated + location until at least one year after the last time you distribute an + Opaque copy (directly or through your agents or retailers) of that + edition to the public. + + It is requested, but not required, that you contact the authors of the + Document well before redistributing any large number of copies, to give + them a chance to provide you with an updated version of the Document. + + + 4. MODIFICATIONS + + You may copy and distribute a Modified Version of the Document under + the conditions of sections 2 and 3 above, provided that you release + the Modified Version under precisely this License, with the Modified + Version filling the role of the Document, thus licensing distribution + and modification of the Modified Version to whoever possesses a copy + of it. In addition, you must do these things in the Modified Version: + + A. Use in the Title Page (and on the covers, if any) a title distinct + from that of the Document, and from those of previous versions + (which should, if there were any, be listed in the History section + of the Document). You may use the same title as a previous version + if the original publisher of that version gives permission. + B. List on the Title Page, as authors, one or more persons or entities + responsible for authorship of the modifications in the Modified + Version, together with at least five of the principal authors of the + Document (all of its principal authors, if it has fewer than five), + unless they release you from this requirement. + C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. + D. Preserve all the copyright notices of the Document. + E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. + F. Include, immediately after the copyright notices, a license notice + giving the public permission to use the Modified Version under the + terms of this License, in the form shown in the Addendum below. + G. Preserve in that license notice the full lists of Invariant Sections + and required Cover Texts given in the Document's license notice. + H. Include an unaltered copy of this License. + I. Preserve the section Entitled "History", Preserve its Title, and add + to it an item stating at least the title, year, new authors, and + publisher of the Modified Version as given on the Title Page. If + there is no section Entitled "History" in the Document, create one + stating the title, year, authors, and publisher of the Document as + given on its Title Page, then add an item describing the Modified + Version as stated in the previous sentence. + J. Preserve the network location, if any, given in the Document for + public access to a Transparent copy of the Document, and likewise + the network locations given in the Document for previous versions + it was based on. These may be placed in the "History" section. + You may omit a network location for a work that was published at + least four years before the Document itself, or if the original + publisher of the version it refers to gives permission. + K. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the section all + the substance and tone of each of the contributor acknowledgements + and/or dedications given therein. + L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section titles. + M. Delete any section Entitled "Endorsements". Such a section + may not be included in the Modified Version. + N. Do not retitle any existing section to be Entitled "Endorsements" + or to conflict in title with any Invariant Section. + O. Preserve any Warranty Disclaimers. + + If the Modified Version includes new front-matter sections or + appendices that qualify as Secondary Sections and contain no material + copied from the Document, you may at your option designate some or all + of these sections as invariant. To do this, add their titles to the + list of Invariant Sections in the Modified Version's license notice. + These titles must be distinct from any other section titles. + + You may add a section Entitled "Endorsements", provided it contains + nothing but endorsements of your Modified Version by various + parties--for example, statements of peer review or that the text has + been approved by an organization as the authoritative definition of a + standard. + + You may add a passage of up to five words as a Front-Cover Text, and a + passage of up to 25 words as a Back-Cover Text, to the end of the list + of Cover Texts in the Modified Version. Only one passage of + Front-Cover Text and one of Back-Cover Text may be added by (or + through arrangements made by) any one entity. If the Document already + includes a cover text for the same cover, previously added by you or + by arrangement made by the same entity you are acting on behalf of, + you may not add another; but you may replace the old one, on explicit + permission from the previous publisher that added the old one. + + The author(s) and publisher(s) of the Document do not by this License + give permission to use their names for publicity for or to assert or + imply endorsement of any Modified Version. + + + 5. COMBINING DOCUMENTS + + You may combine the Document with other documents released under this + License, under the terms defined in section 4 above for modified + versions, provided that you include in the combination all of the + Invariant Sections of all of the original documents, unmodified, and + list them all as Invariant Sections of your combined work in its + license notice, and that you preserve all their Warranty Disclaimers. + + The combined work need only contain one copy of this License, and + multiple identical Invariant Sections may be replaced with a single + copy. If there are multiple Invariant Sections with the same name but + different contents, make the title of each such section unique by + adding at the end of it, in parentheses, the name of the original + author or publisher of that section if known, or else a unique number. + Make the same adjustment to the section titles in the list of + Invariant Sections in the license notice of the combined work. + + In the combination, you must combine any sections Entitled "History" + in the various original documents, forming one section Entitled + "History"; likewise combine any sections Entitled "Acknowledgements", + and any sections Entitled "Dedications". You must delete all sections + Entitled "Endorsements". + + + 6. COLLECTIONS OF DOCUMENTS + + You may make a collection consisting of the Document and other documents + released under this License, and replace the individual copies of this + License in the various documents with a single copy that is included in + the collection, provided that you follow the rules of this License for + verbatim copying of each of the documents in all other respects. + + You may extract a single document from such a collection, and distribute + it individually under this License, provided you insert a copy of this + License into the extracted document, and follow this License in all + other respects regarding verbatim copying of that document. + + + 7. AGGREGATION WITH INDEPENDENT WORKS + + A compilation of the Document or its derivatives with other separate + and independent documents or works, in or on a volume of a storage or + distribution medium, is called an "aggregate" if the copyright + resulting from the compilation is not used to limit the legal rights + of the compilation's users beyond what the individual works permit. + When the Document is included in an aggregate, this License does not + apply to the other works in the aggregate which are not themselves + derivative works of the Document. + + If the Cover Text requirement of section 3 is applicable to these + copies of the Document, then if the Document is less than one half of + the entire aggregate, the Document's Cover Texts may be placed on + covers that bracket the Document within the aggregate, or the + electronic equivalent of covers if the Document is in electronic form. + Otherwise they must appear on printed covers that bracket the whole + aggregate. + + + 8. TRANSLATION + + Translation is considered a kind of modification, so you may + distribute translations of the Document under the terms of section 4. + Replacing Invariant Sections with translations requires special + permission from their copyright holders, but you may include + translations of some or all Invariant Sections in addition to the + original versions of these Invariant Sections. You may include a + translation of this License, and all the license notices in the + Document, and any Warranty Disclaimers, provided that you also include + the original English version of this License and the original versions + of those notices and disclaimers. In case of a disagreement between + the translation and the original version of this License or a notice + or disclaimer, the original version will prevail. + + If a section in the Document is Entitled "Acknowledgements", + "Dedications", or "History", the requirement (section 4) to Preserve + its Title (section 1) will typically require changing the actual + title. + + + 9. TERMINATION + + You may not copy, modify, sublicense, or distribute the Document except + as expressly provided for under this License. Any other attempt to + copy, modify, sublicense or distribute the Document is void, and will + automatically terminate your rights under this License. However, + parties who have received copies, or rights, from you under this + License will not have their licenses terminated so long as such + parties remain in full compliance. + + + 10. FUTURE REVISIONS OF THIS LICENSE + + The Free Software Foundation may publish new, revised versions + of the GNU Free Documentation License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. See + http://www.gnu.org/copyleft/. + + Each version of the License is given a distinguishing version number. + If the Document specifies that a particular numbered version of this + License "or any later version" applies to it, you have the option of + following the terms and conditions either of that specified version or + of any later version that has been published (not as a draft) by the + Free Software Foundation. If the Document does not specify a version + number of this License, you may choose any version ever published (not + as a draft) by the Free Software Foundation. + + + ADDENDUM: How to use this License for your documents + + To use this License in a document you have written, include a copy of + the License in the document and put the following copyright and + license notices just after the title page: + + Copyright (c) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.2 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled + "GNU Free Documentation License". + + If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, + replace the "with...Texts." line with this: + + with the Invariant Sections being LIST THEIR TITLES, with the + Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. + + If you have Invariant Sections without Cover Texts, or some other + combination of the three, merge those two alternatives to suit the + situation. + + If your document contains nontrivial examples of program code, we + recommend releasing these examples in parallel under your choice of + free software license, such as the GNU General Public License, + to permit their use in free software. diff --git a/debian/icons/kuickshow-16.xpm b/debian/icons/kuickshow-16.xpm new file mode 100644 index 0000000..cf91f34 --- /dev/null +++ b/debian/icons/kuickshow-16.xpm @@ -0,0 +1,41 @@ +/* XPM */ +static char *kuickshow-16[] = { +/* columns rows colors chars-per-pixel */ +"16 14 21 1", +" c black", +". c #000033", +"X c gray20", +"o c #006633", +"O c #336633", +"+ c #0033FF", +"@ c #3333FF", +"# c #6666FF", +"$ c #009933", +"% c #669933", +"& c #9900CC", +"* c #9933CC", +"= c #9933FF", +"- c #9966FF", +"; c #CC66CC", +": c #9999FF", +"> c #CC99FF", +", c #CCCCFF", +"< c #FFCCFF", +"1 c gray100", +"2 c None", +/* pixels */ +"2222222221,:2222", +"22211,:21,>:2222", +"22-<>1>-::->1122", +"22-,:->--:11>--2", +"222:-++@@-+-::#2", +"-11>-=>* @@+:@+2", +"1<::@=. @-:@*222", +">-@>>:@@##>+oo22", +"@@1+@>,#@>-=$%O2", +"-1-+@1:#--&OOXOO", +"-1;:@<:::*&2oOO2", +"2+@@2<:*22o%2222", +"2222222222o%2222", +"22222222222oo222" +}; diff --git a/debian/icons/kuickshow.xpm b/debian/icons/kuickshow.xpm new file mode 100644 index 0000000..5d2d6ca --- /dev/null +++ b/debian/icons/kuickshow.xpm @@ -0,0 +1,66 @@ +/* XPM */ +static char *kuickshow[] = { +/* columns rows colors chars-per-pixel */ +"32 29 31 1", +" c black", +". c #000033", +"X c #003333", +"o c gray20", +"O c #006633", +"+ c #336633", +"@ c #0033FF", +"# c #3333FF", +"$ c #6666FF", +"% c #009933", +"& c #339933", +"* c #669933", +"= c #6699CC", +"- c #6699FF", +"; c #9900CC", +": c #9900FF", +"> c #9933CC", +", c #9933FF", +"< c #9966CC", +"1 c #9966FF", +"2 c #CC00CC", +"3 c #CC66CC", +"4 c #CC66FF", +"5 c #9999CC", +"6 c #9999FF", +"7 c #CC99FF", +"8 c #FF99FF", +"9 c #CCCCFF", +"0 c #FFCCFF", +"q c gray100", +"w c None", +/* pixels */ +"wwwwwwwwwwwwwwwwwww14114wwwwwwww", +"wwwwwwwwwwwwwwwwww6qqqq66wwwwwww", +"wwwwwww464141wwww4q909941wwwwwww", +"wwwwww1qq09976ww1q0917966wwwwwww", +"wwwww4q99171416w7q14117$1764wwww", +"wwwww1q01719176176667167qqqq7www", +"wwwww7q949617116016161qq979916ww", +"wwwww1q94661-761-1@6@q9q4771716w", +"wwwwww499116#@101#@#946$614616#w", +"wwwwwww671#@#@>#@##11@6166666$#w", +"www71717616#>,q, 6@6##@15$11@#>w", +"w1790997616,q7,, #@#@##@#6@##1ww", +"7q971711##>q6>,X#11611@,#@#>,www", +"1q9096@6@#.,,. #@#=1666#,>,wwwww", +"1q71711#@#-;X7#@#@#1611#>wwwwwww", +"1711@##777#67#@##6$6171@,***wwww", +"#66##q71##@710@1@166166#>++%**ww", +">#@#976@1#17961#6#$791#,*%%+++;w", +"w>6q97@6@#q9166$11776@>+o*;%%+:;", +"w1q0614@1#q096<67191#;:+*+%o++%;", +"w7q946616@q68909901@;,w;+o+%%++:", +"w1q963161#@064116@#,%;;w:O++;:;w", +"ww#70616@>,#@####>,w%&,ww;::;www", +"ww,@##@#,ww>,>,>,wwww%*>wwwwwwww", +"www,>,>,wwwwwwwwwwwwww%2wwwwwwww", +"wwwwwwwwwwwwwwwwwwwwww%*2wwwwwww", +"wwwwwwwwwwwwwwwwwwwwwww%:wwwwwww", +"wwwwwwwwwwwwwwwwwwwwwww%*2wwwwww", +"wwwwwwwwwwwwwwwwwwwwwwww>:wwwwww" +}; diff --git a/debian/kuickshow-kde3.install b/debian/kuickshow-kde3.install new file mode 100644 index 0000000..b6c9d60 --- /dev/null +++ b/debian/kuickshow-kde3.install @@ -0,0 +1,2 @@ +debian/icons/kuickshow.xpm /opt/kde3/share/pixmaps +debian/icons/kuickshow-16.xpm /opt/kde3/share/pixmaps diff --git a/debian/kuickshow-kde3.lintian b/debian/kuickshow-kde3.lintian new file mode 100644 index 0000000..40ef27b --- /dev/null +++ b/debian/kuickshow-kde3.lintian @@ -0,0 +1,4 @@ +kuickshow-kde3: no-shlibs-control-file opt/kde3/lib/libkdeinit_kuickshow.so +kuickshow-kde3: postinst-must-call-ldconfig opt/kde3/lib/libkdeinit_kuickshow.so +kuickshow-kde3: postrm-should-call-ldconfig opt/kde3/lib/libkdeinit_kuickshow.so +kuickshow-kde3: package-name-doesnt-match-sonames libkdeinit-kuickshow diff --git a/debian/kuickshow-kde3.manpages b/debian/kuickshow-kde3.manpages new file mode 100644 index 0000000..3eadda9 --- /dev/null +++ b/debian/kuickshow-kde3.manpages @@ -0,0 +1 @@ +debian/man/kuickshow.1 diff --git a/debian/kuickshow-kde3.menu b/debian/kuickshow-kde3.menu new file mode 100644 index 0000000..430e432 --- /dev/null +++ b/debian/kuickshow-kde3.menu @@ -0,0 +1,11 @@ +?package(kuickshow):\ + needs="X11"\ + section="Apps/Graphics"\ + hints="KDE"\ + title="Kuickshow"\ + icon32x32="/usr/share/pixmaps/kuickshow.xpm"\ + icon16x16="/usr/share/pixmaps/kuickshow-16.xpm"\ + command="/opt/kde3/bin/kuickshow" + +# Icon 32x32 kuickshow/src/cr32-app-kuickshow.png kuickshow.xpm +# Icon 16x16 kuickshow/src/cr16-app-kuickshow.png kuickshow-16.xpm diff --git a/debian/man/kuickshow.1 b/debian/man/kuickshow.1 new file mode 100644 index 0000000..2675eae --- /dev/null +++ b/debian/man/kuickshow.1 @@ -0,0 +1,99 @@ +.TH KUICKSHOW "1" "September 2002" KDE "KDE Application" +.SH NAME +kuickshow \- KDE Image Viewer +.SH SYNOPSIS +.B kuickshow +[\fIQt-options\fR] [\fIKDE-options\fR] [\fIoptions\fR] [\fIfiles\fR] +.SH DESCRIPTION +This manual page documents briefly the +.B Kuickshow +KDE Application. +This manual page was written for the Debian GNU/Linux distribution +because the original program does not have a manual page. +.P +.B KuickShow +is a comfortable image browser/viewer. It displays a +filebrowser where you can select images which are then shown. +.P +The following image formats are supported: +.P +.RS +\(bu jpg +.br +\(bu gif +.br +\(bu tiff +.br +\(bu png +.br +\(bu bmp +.br +\(bu psd +.br +\(bu xmp +.br +\(bu xbm +.br +\(bu eim +.RE +.P +Images can be displayed either in their own window, as large as the +image, or fullscreen. +.P +This program is part of the official KDE graphics module. +.SS "Generic options:" +.TP +\fB\-\-help\fR +Show help about options +.TP +\fB\-\-help\-qt\fR +Show Qt specific options +.TP +\fB\-\-help\-kde\fR +Show KDE specific options +.TP +\fB\-\-help\-all\fR +Show all options +.TP +\fB\-\-author\fR +Show author information +.TP +\fB\-v\fR, \fB\-\-version\fR +Show version information +.TP +\fB\-\-license\fR +Show license information +.TP +\fB\-\-\fR +End of options +.SH OPTIONS +.TP +\fB\-\-lastdir\fR +Start in the last visited directory, not the current working directory +.SS "Arguments:" +.TP +files +Optional image filenames/urls to show +.SH "SEE ALSO" +The full documentation for +.B Kuickshow +is maintained as a docbook manual. If the +.B khelpcenter +program is properly installed at your site, the command +.IP +.B khelpcenter help:/kuickshow +.PP +should give you access to the complete manual. +.SH AUTHOR +KuickShow was written by +.nh +Carsten Pfeiffer <pfeiffer@kde.org>. +.hy +.br +Please use http://bugs.kde.org to report bugs, do not mail the authors directly. +.br +This manual page was prepared by +.nh +Karolina Lindqvist <pgd\-karolinali@algonet.se> +.hy +for the Debian GNU/Linux system (but may be used by others). diff --git a/debian/rules b/debian/rules new file mode 100755 index 0000000..8c14ff2 --- /dev/null +++ b/debian/rules @@ -0,0 +1,15 @@ +#! /usr/bin/make -f + +include /usr/share/cdbs/1/rules/debhelper.mk +include debian/cdbs/debian-qt-kde.mk +include /usr/share/cdbs/1/rules/simple-patchsys.mk +include /usr/share/cdbs/1/rules/utils.mk + +DEB_CONFIGURE_INCLUDEDIR := /opt/kde3/include/kde +DEB_CONFIGURE_MANDIR := /opt/kde3/share/man +DEB_CONFIGURE_PREFIX := /opt/kde3 +DEB_CONFIGURE_INFODIR := /opt/kde3/share/info + +cdbs_configure_flags := --with-qt-dir=/usr/share/qt3 --disable-rpath --with-xinerama $(cdbs_kde_enable_final) $(cdbs_kde_enable_debug) + +DEB_CONFIGURE_EXTRA_FLAGS := --prefix=/opt/kde3 --with-extra-libs=/opt/kde3/lib --with-extra-includes=/opt/kde3/include/kde diff --git a/doc/Makefile.am b/doc/Makefile.am new file mode 100644 index 0000000..6812bd2 --- /dev/null +++ b/doc/Makefile.am @@ -0,0 +1,5 @@ + +KDE_LANG = en +KDE_DOCS = AUTO +SUBDIRS = $(AUTODIRS) + diff --git a/doc/kuickshow/Makefile.am b/doc/kuickshow/Makefile.am new file mode 100644 index 0000000..085981d --- /dev/null +++ b/doc/kuickshow/Makefile.am @@ -0,0 +1,4 @@ + +KDE_LANG = en +KDE_DOCS = AUTO + diff --git a/doc/kuickshow/index.docbook b/doc/kuickshow/index.docbook new file mode 100644 index 0000000..e454e2b --- /dev/null +++ b/doc/kuickshow/index.docbook @@ -0,0 +1,1041 @@ +<?xml version="1.0" ?> +<!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" "dtd/kdex.dtd" [ + <!ENTITY kappname "&kuickshow;"> + <!ENTITY package "kdegraphics"> + <!ENTITY % addindex "IGNORE"> + <!ENTITY % English "INCLUDE"><!-- change language only here --> +]> + +<!-- The language must NOT be changed here. --> +<book lang="&language;"> + +<bookinfo> +<title>The &kuickshow; Handbook</title> + +<authorgroup> +<author> +<firstname>Carsten</firstname> +<surname>Pfeiffer</surname> +<affiliation> +<address>&Carsten.Pfeiffer.mail;</address> +</affiliation> +</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<copyright> +<year>2001</year> +<holder>&Carsten.Pfeiffer;</holder> +</copyright> + +<legalnotice>&FDLNotice;</legalnotice> + +<date>2005-12-29</date> +<releaseinfo>0.8.7</releaseinfo> + +<!-- Abstract about this handbook --> + +<abstract> +<para> +&kuickshow; is a comfortable image browser/viewer. +</para> +</abstract> + +<keywordset> +<keyword>KDE</keyword> +<keyword>kdegraphics</keyword> +<keyword>kuickshow</keyword> +<keyword>image</keyword> +<keyword>viewer</keyword> +</keywordset> + +</bookinfo> + +<chapter id="introduction"> +<title>Introduction</title> + +<para> +&kuickshow; is a comfortable image browser/viewer. It displays a +filebrowser where you can select images which are then shown. +</para> + +<!-- LW: put a nice screenshot here --> + +<para>The following image formats are supported:</para> +<itemizedlist> +<listitem><para>jpg</para> +</listitem> +<listitem><para>gif</para> +</listitem> +<listitem><para>tiff</para> +</listitem> +<listitem><para>png</para> +</listitem> +<listitem><para>bmp</para> +</listitem> +<listitem><para>psd</para> +</listitem> +<listitem><para>xpm</para> +</listitem> +<listitem><para>ppm</para> +</listitem> +<listitem><para>pgm</para> +</listitem> +<listitem><para>pbm</para> +</listitem> +<listitem><para>pnm</para> +</listitem> +<listitem><para>eim</para> +</listitem> +<listitem><para>xcf</para> +</listitem> +</itemizedlist> + +<para>Images can be displayed either in their own window, as large as +the image, or fullscreen.</para> + +</chapter> + +<chapter id="using-kuickshow"> +<title>Using &kuickshow;</title> + +<para>Using &kuickshow; is very simple. The file browser lists files, +which you can select with a &LMB; click or the <keycap>Return</keycap> +key.</para> + +<screenshot> +<screeninfo>Here's a screenshot of &kuickshow;</screeninfo> + <mediaobject> + <imageobject> + <imagedata fileref="screenshot.png" format="PNG"/> + </imageobject> + <imageobject> + <imagedata fileref="screenshot.eps" format="EPS"/> + </imageobject> + <textobject> + <phrase>Screenshot</phrase> + </textobject> + </mediaobject> +</screenshot> + + +<sect1 id="kuickshow-features"> +<title>More &kuickshow; features</title> + +<para>The options dialog makes available more possibilities:</para> + +<itemizedlist> +<listitem><para>Images can be automatically shrunk to fit onto the +screen, if they are larger.</para> +</listitem> +<listitem><para>You can configure whether images should show up in +their own window, or always use the same window.</para> +</listitem> +<listitem><para>You can set the delay time for a slide show.</para> +</listitem> +<listitem><para>You can tell the browser which file types to show.</para> +</listitem> +<listitem><para>You can tweak the speed/quality +ratio</para></listitem> +</itemizedlist> + +<para>If you are looking for a certain file, just enter the first few +characters of it's filename in the browser. A small edit window will +pop up in the bottom right corner. When a matching file is found, it +is highlighted. You can leave the edit window by pressing +<keycap>Return</keycap> or &Esc;.</para> + +</sect1> +</chapter> + +<chapter id="configuration-dialog"> +<title>The <guilabel>&kuickshow; Configuration</guilabel> +Dialog</title> + +<para>The <guilabel>&kuickshow; Configuration</guilabel> dialog +contains 5 tabs. Three of them, <link +linkend="general-options"><guilabel>General</guilabel></link>, <link +linkend="modifications-options"><guilabel>Modifications</guilabel></link> +and <link linkend="slideshow-options"><guilabel>Slideshow</guilabel></link> +configure the operation of &kuickshow;, and the other two, +<link linkend="shortcuts-options"><guilabel>Viewer Shortcuts</guilabel></link> +and <link linkend="shortcuts-options"><guilabel>Browser Shortcuts</guilabel></link> +allow you to personalize the shortcuts for the +respective windows.</para> + +<sect1 id="general-options"> +<title><guilabel>General</guilabel> Options</title> + +<para>The <guilabel>General</guilabel> contains the options to +configure and tune &kuickshow;.</para> + +<variablelist> +<varlistentry> +<term><guilabel>Fullscreen mode</guilabel></term> +<listitem> +<para>If this is selected, images open in full screen mode. If the +image is not large enough to fill the screen, the rest of the screen +is filled with the background color selected below. The default is +off.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Preload next image</guilabel></term> +<listitem> +<para>If this is selected, &kuickshow; will load the next image in the +folder, while you are looking at the current one. This reduces the +delay when you select the next image, and is especially useful for +slide shows.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Remember last folder</guilabel></term> +<listitem> +<para>If this is selected, &kuickshow; saves the name of the last folder on exit. +On next start &kuickshow; will open this folder in the browser window.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Background color:</guilabel></term> +<listitem> +<para>Click on the colored bar to select a background color. This is +used to fill the screen in fullscreen mode, or the window, if you have +resized it larger than the image.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Show only files with extension:</guilabel></term> +<listitem> +<para>You can configure &kuickshow; to only show you some of the file +types it is capable of.</para> +</listitem> +</varlistentry> + +</variablelist> + +<variablelist> +<title><guilabel>Quality/Speed</guilabel></title> +<varlistentry> +<term><guilabel>Fast rendering</guilabel></term> +<listitem><para><!-- LW: Uhm.. help? -->Render things fast.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Dither in HiColor (15/16bit) modes</guilabel></term> +<listitem><para><!-- LW: Maybe these should be on an advanced tab --> +<!-- Write an example what this does here --> +</para></listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Dither in LowColor (<=8bit) modes</guilabel></term> +<listitem><para><!-- And here --> +</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Use own color palette</guilabel></term> +<listitem><para><!-- and this one --> +</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Fast palette remapping</guilabel></term> +<listitem> +<para><!-- and this one --> +</para></listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Maximum cache size (MB):</guilabel></term> +<listitem> +<para><!-- and another --> +</para></listitem> +</varlistentry> + +</variablelist> + +</sect1> + +<sect1 id="modifications-options"> +<title>The <guilabel>Modifications</guilabel> Tab</title> + +<para>Check <guilabel>Apply default image modifications</guilabel> to open an image +with these modifications in &kuickshow;.</para> + +<variablelist> +<title><guilabel>Scaling</guilabel></title> +<varlistentry> +<term><guilabel>Shrink image to screen size, if larger</guilabel></term> +<listitem> +<para>If this is selected, large images are displayed in maximized window. The default is +on.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Shrink image to screen size, if smaler, up to factor:</guilabel></term> +<listitem> +<para>If this is selected, &kuickshow; increases the magnification of small images up to +the selected factor.</para> +</listitem> +</varlistentry> + +</variablelist> + +<variablelist> +<title><guilabel>Geometry</guilabel></title> +<varlistentry> +<term><guilabel>Flip vertically</guilabel></term> +<listitem><para>Flips the image vertically.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Flip horizontally</guilabel></term> +<listitem><para>Flips the image horizontally. +</para></listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Rotate image</guilabel></term> +<listitem><para>Rotates the image to 0, 90, 180 or 270 degrees. +</para> +</listitem> +</varlistentry> + +</variablelist> + +<variablelist> +<title><guilabel>Adjustments</guilabel></title> +<varlistentry> +<term><guilabel>Brightness:</guilabel></term> +<listitem><para>Lightens/darkens the image.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Contrast:</guilabel></term> +<listitem><para>Adds/Removes contrast.</para></listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Gamma:</guilabel></term> +<listitem><para>More/less gamma. +</para> +</listitem> +</varlistentry> + +</variablelist> + +<para>A <guilabel>Preview</guilabel> of the <guilabel>Original</guilabel> +and <guilabel>Modified</guilabel> image is displayed below this options.</para> + +</sect1> + +<sect1 id="slideshow-options"> +<title>The <guilabel>Slideshow</guilabel> Tab</title> + +<variablelist> + +<varlistentry> +<term><guilabel>Switch to full-screen</guilabel></term> +<listitem> +<para>Indicates if &kuickshow; should switch to full-screen mode +when starting the slideshow. +</para></listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Start with current image</guilabel></term> +<listitem> +<para>Indicates if the slideshow should start with the first +image in the folder or with the image which is selected. +</para></listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Delay between slides:</guilabel></term> +<listitem> +<para>The length of time between image changes during the slideshow. +You can use the slider, type a new value into the field, +or use the small arrows to increase or decrease the value. The +default is 3 seconds.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><guilabel>Iterations (0 = infinite):</guilabel></term> +<listitem> +<para>The amount of iterations. If set to 0 it will loop untill you +abort the slideshow. You can use the slider, type a new value into the +field, or use the small arrows to increase or decrease the value. The +default is 1.</para> +</listitem> +</varlistentry> + +</variablelist> +</sect1> + +<sect1 id="shortcuts-options"> +<title>The <guimenu>Shortcuts</guimenu> Tabs</title> +<para>Change the shortcuts for the different modes of &kuickshow; +in the <guilabel>Viewer Shortcuts</guilabel> and the <guilabel>Browser Shortcuts</guilabel> tabs.</para> +</sect1> + +</chapter> + +<chapter id="menus"> +<title>Menu Reference</title> + +<sect1 id="file-menu"> +<title>The <guimenu>File</guimenu> Menu</title> + +<variablelist> +<varlistentry> +<term><menuchoice> +<shortcut> +<keycombo action="simul">&Ctrl;<keycap>O</keycap></keycombo> +</shortcut> +<guimenu>File</guimenu> +<guimenuitem>Open</guimenuitem> +</menuchoice></term> +<listitem><para><action>Opens a new image</action> in &kuickshow;.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>File</guimenu> +<guimenuitem>Show Image</guimenuitem> +</menuchoice></term> +<listitem><para><action>Displays </action> the selected image in a new image +window.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>File</guimenu> +<guimenuitem>Show Image in Aktive Window</guimenuitem> +</menuchoice></term> +<listitem><para><action>Displays </action>the selected image in the active image +window.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>File</guimenu> +<guimenuitem>Show Image in Fullscreen Mode</guimenuitem> +</menuchoice></term> +<listitem><para><action>Displays</action> the selected image in fullscreen mode. +</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<shortcut><keycap>F2</keycap></shortcut> +<guimenu>File</guimenu> +<guimenuitem>Start Slideshow</guimenuitem> +</menuchoice></term> +<listitem><para><action>Starts</action> a slideshow of the images in the folder.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<shortcut><keycombo action="simul">&Ctrl; +<keycap>P</keycap></keycombo></shortcut> +<guimenu>File</guimenu> +<guimenuitem>Print Image...</guimenuitem> +</menuchoice></term> +<listitem><para><action>Prints the image</action>.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice><shortcut><keycombo action="simul"> +&Ctrl;<keycap>Q</keycap></keycombo></shortcut> +<guimenu>File</guimenu> +<guimenuitem>Quit</guimenuitem> +</menuchoice></term> +<listitem><para><action>Quits</action> &kuickshow;. If you have several +images windows open, all of them are closed.</para></listitem> +</varlistentry> + +</variablelist> + +</sect1> + +<sect1 id="edit-menu"> +<title>The <guimenu>Edit</guimenu> Menu</title> + +<variablelist> +<varlistentry> +<term><menuchoice> +<shortcut><keycap>F10</keycap></shortcut> +<guimenu>Edit</guimenu> +<guimenuitem>New Folder...</guimenuitem></menuchoice> +</term> +<listitem> +<para><action>Create</action> a new folder.</para> +</listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice><shortcut><keycombo action="simul"> +<keycap>&Shift;</keycap><keycap>Delete</keycap></keycombo></shortcut> +<guimenu>Edit</guimenu> +<guimenuitem>Delete</guimenuitem> +</menuchoice></term> +<listitem><para><action>Deletes</action> the current file. You will be asked to confirm the +action.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<shortcut><keycombo action="simul"> +<keycap>&Alt;</keycap><keycap>Return</keycap></keycombo></shortcut> +<guimenu>Edit</guimenu> +<guimenuitem>Properties</guimenuitem> +</menuchoice></term> +<listitem><para><action>Displays</action> the properties of the current image file.</para></listitem> +</varlistentry> +</variablelist> + +</sect1> + +<sect1 id="view-menu"> +<title>The <guimenu>View</guimenu> Menu</title> + +<variablelist> +<varlistentry> +<term><menuchoice> +<shortcut><keycap>F6</keycap></shortcut> +<guimenu>View</guimenu> +<guimenuitem>Short View</guimenuitem> +</menuchoice></term> +<listitem><para>If this option is selected, only the names of the files and folders will be shown.</para> +<para>Compare this to detailed view.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<shortcut><keycap>F7</keycap></shortcut> +<guimenu>View</guimenu> +<guimenuitem>Detailed View</guimenuitem> +</menuchoice></term> +<listitem><para>If this option is selected, the names, sizes, dates, permissions, file owners and group ownerships are shown.</para> +<para>Compare this to short view.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<shortcut><keycap>F8</keycap></shortcut> +<guimenu>View</guimenu> +<guimenuitem>Show Hidden Files</guimenuitem> +</menuchoice></term> +<listitem><para>This will toggle between revealing and hiding normally hidden files.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<shortcut><keycap>F12</keycap></shortcut> +<guimenu>View</guimenu> +<guimenuitem>Separate Folders</guimenuitem> +</menuchoice></term> +<listitem><para>Use this option to toggle between a 2 pane view of the file system (one pane for the folders +and one pane for the files) and a one pane view of the file system with folders and files.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>View</guimenu> +<guimenuitem>Large Icons</guimenuitem> +</menuchoice></term> +<listitem><para>Display the image files in the folder with large icons. +This item is only available in <guimenuitem>Short View</guimenuitem> mode.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>View</guimenu> +<guimenuitem>Small Icons</guimenuitem> +</menuchoice></term> +<listitem><para>Display the image files in the folder with small icons. +This item is only available in <guimenuitem>Short View</guimenuitem> mode.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>View</guimenu> +<guimenuitem>Thumbnail Previews</guimenuitem> +</menuchoice></term> +<listitem><para>Display a preview of the images in the folder. This item is only available in <guimenuitem>Short View</guimenuitem> mode.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice><shortcut><keycombo action="simul"> +&Ctrl;<keycap>-</keycap></keycombo></shortcut> +<guimenu>View</guimenu> +<guimenuitem>Zoom Out</guimenuitem> +</menuchoice></term> +<listitem><para><action>Reduces the image size by ten percent</action>. Again +this refers to the <emphasis>current</emphasis> size of the +image.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice><shortcut><keycombo action="simul"> +&Ctrl;<keycap>+</keycap></keycombo></shortcut> +<guimenu>View</guimenu> +<guimenuitem>Zoom In</guimenuitem> +</menuchoice></term> +<listitem><para><action>Enlarges the image by ten percent</action>. Notice that +this refers to the <emphasis>current</emphasis> size of the +picture.</para></listitem> +</varlistentry> +</variablelist> + +</sect1> + +<sect1 id="settings-menu"> +<title>The <guimenu>Settings</guimenu> Menu</title> + +<variablelist> +<varlistentry> +<term><menuchoice> +<guimenu>Settings</guimenu> +<guimenuitem>Configure &kuickshow;...</guimenuitem> +</menuchoice></term> +<listitem><para><action>Opens a dialog for changing some options</action> as +described in the section <xref linkend="configuration-dialog"/></para> +</listitem> +</varlistentry> +</variablelist> +</sect1> + + +<sect1 id="help-menu"> +<title>The <guimenu>Help</guimenu> Menu</title> + +<variablelist> +<varlistentry> +<term> +<menuchoice> +<shortcut> +<keycombo action="simul"><keycap>F1</keycap></keycombo> +</shortcut> +<guimenu>Help</guimenu> +<guimenuitem>&kappname; Handbook</guimenuitem> +</menuchoice> +</term> +<listitem><para><action>Invokes the &kde; Help system</action> starting at the +&kappname; help pages. (this document).</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>Help</guimenu> +<guimenuitem>Report Bug...</guimenuitem> +</menuchoice></term> +<listitem><para><action>Opens the Bug report dialog</action> where you can +report a bug or request a <quote>wishlist</quote> feature.</para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>Help</guimenu> +<guimenuitem>About &kappname;</guimenuitem> +</menuchoice></term> +<listitem><para><action>This will display version and author +information.</action></para></listitem> +</varlistentry> + +<varlistentry> +<term><menuchoice> +<guimenu>Help</guimenu> +<guimenuitem>About KDE</guimenuitem> +</menuchoice></term> +<listitem><para><action>This displays the &kde; version and other basic +information.</action></para></listitem> +</varlistentry> +</variablelist> + +</sect1> + +</chapter> + +<chapter id="commands"> +<title>Command Reference</title> + +<sect1 id="keybindings"> +<title>The Image Window</title> + +<para>All the shortcuts are configurable from the <link +linkend="configuration-dialog">Configuration Dialog</link>.</para> + +<table> +<title>Image Window Keyboard Shortcuts</title> +<tgroup cols="2"> +<thead> +<row> +<entry>Key</entry> +<entry>Action</entry> +</row> +</thead> +<tbody> +<row> +<entry><keycap>Page Down</keycap></entry> +<entry>Load the next image</entry> +</row> +<row> +<entry><keycap>Page Up</keycap></entry> +<entry>Load the previous image</entry> +</row> +<row> +<entry><keycap>Home</keycap></entry> +<entry>Loads the first image</entry> +</row> +<row> +<entry><keycap>End</keycap></entry> +<entry>Loads the last image</entry> +</row> +<row> +<entry><keycap>+</keycap></entry> +<entry>Zooms into the image</entry> +</row> +<row> +<entry><keycap>-</keycap></entry> +<entry>Zooms out of the image</entry> +</row> +<row> +<entry><keycap>*</keycap></entry> +<entry>Flips the image horizontally</entry> +</row> +<row> +<entry><keycap>/</keycap></entry> +<entry>Flips the image vertically</entry> +</row> +<row> +<entry><keycap>7</keycap></entry> +<entry>Rotates 270° clockwise (which is also 90° +counter-clockwise)</entry> +</row> +<row> +<entry><keycap>8</keycap></entry> +<entry>Rotates 90° clockwise</entry> +</row> +<row> +<entry><keycap>9</keycap></entry> +<entry>Rotates 180° clockwise</entry> +</row> +<row> +<entry><keycap>Arrow</keycap> keys</entry> +<entry>Move the image (or rather, you, the viewer,) if it is larger +than the screen</entry> +</row> +<row> +<entry><keycap>Return</keycap></entry> +<entry>Toggles between fullscreen and window mode</entry> +</row> +<row> +<entry><keycap>Space</keycap></entry> +<entry>Toggles the display of the browser</entry> +</row> +<row> +<entry>&Esc;</entry> +<entry>Closes the image window. This will close &kuickshow; entirely, +if you don't have a browser window open.</entry> +</row> +<row> +<entry><keycap>B</keycap>/<keycombo action="simul">&Shift;<keycap>B</keycap></keycombo></entry> +<entry>Lightens/darkens the image</entry> +</row> +<row> +<entry><keycap>C</keycap>/<keycombo action="simul">&Shift;<keycap>C</keycap></keycombo></entry> +<entry>Adds/Removes contrast</entry> +</row> +<row> +<entry><keycap>G</keycap>/<keycombo action="simul">&Shift;<keycap>G</keycap></keycombo></entry> +<entry>More/less <firstterm>gamma</firstterm></entry> +</row> +<row> +<entry><keycap>O</keycap></entry> +<entry>Shows the image in original size. This is only useful when you +have enabled automatic scaling.</entry> +</row> +<row> +<entry><keycap>Enter</keycap></entry> +<entry>Redisplays the image with the default settings and +size.</entry> +</row> +<row> +<entry><keycombo action="simul">&Ctrl;<keycap>S</keycap></keycombo></entry> +<entry>Opens the <guilabel>Save As</guilabel> dialog</entry> +</row> +<row> +<entry><keycap>Delete</keycap></entry> +<entry>Deletes the current image. You will be asked to confirm the +request.</entry> +</row> +<row> +<entry><keycombo action="simul">&Shift;<keycap>Delete</keycap></keycombo></entry> +<entry>Deletes the current image without asking for +confirmation</entry> +</row> +<row> +<entry><keycombo action="simul">&Alt;<keycap>Return</keycap></keycombo></entry> +<entry>Displays the properties of the image</entry> +</row> +<row> +<entry><keycap>F1</keycap></entry> +<entry>Opens the online help (this file)</entry> +</row> +<row> +<entry><keycombo action="simul">&Ctrl;<keycap>W</keycap></keycombo></entry> +<entry>Quits &kuickshow;</entry> +</row> +</tbody> +</tgroup> +</table> + +<table> +<title>Image Window Mouse Usage</title> +<tgroup cols="2"> +<thead> +<row> +<entry>Mouse button</entry> +<entry>Action</entry> +</row> +</thead> +<tbody> +<row> +<entry><mousebutton>Right</mousebutton> click</entry> +<entry>Opens the context menu, with several options</entry> +</row> +<row> +<entry><mousebutton>Left</mousebutton> drag</entry> +<entry>Moves the image, if it doesn't fit in the window.</entry> +</row> +<row> +<entry><keycombo action="simul">&Shift;<mousebutton>Left</mousebutton> +</keycombo> drag</entry> +<entry>Marks a rectangle you can zoom into.</entry> +</row> +<row> +<entry><mousebutton>Left</mousebutton> double click</entry> +<entry>Closes the current image</entry> +</row> +</tbody> +</tgroup> +</table> + +</sect1> + +<sect1 id="browser-window"> +<title>The Browser Window</title> + +<table> +<title>Browser Window Keybindings</title> +<tgroup cols="2"> +<thead> +<row> +<entry>Keybinding</entry> +<entry>Action</entry> +</row> +</thead> +<tbody> +<row> +<entry><keycap>Return</keycap></entry> +<entry>Enters a folder, or opens an image window, depending on the +item selected.</entry> +</row> +<row> +<entry><keycap>Page Down</keycap></entry> +<entry>Advances one page in the list of files</entry> +</row> +<row> +<entry><keycap>Page Up</keycap></entry> +<entry>Moves back up a page in the list of files</entry> +</row> +<row> +<entry><keycap>Home</keycap></entry> +<entry>Selects the first file or folder</entry> +</row> +<row> +<entry><keycap>End</keycap></entry> +<entry>Selects the last file or folder</entry> +</row> +<row> +<entry><keycap>Space</keycap></entry> +<entry>Toggles showing the browser, if an image window is open</entry> +</row> +<row> +<entry><keycap>any alpha-numeric character</keycap></entry> +<entry>Opens the edit field used for <quote>completion</quote>. Enter +the first characters of a filename to search for, and if found, the +file will be selected.</entry> +</row> +<row> +<entry><keycombo +action="simul">&Ctrl;<keycap>G</keycap></keycombo></entry> +<entry><quote>Go to</quote> — lets you enter a folder to go +to.</entry> +</row> +<row> +<entry><keycap>Delete</keycap></entry> +<entry>Deletes the current file. You will be asked to confirm the +action.</entry> +</row> +<row> +<entry><keycombo +action="simul">&Shift;<keycap>Delete</keycap></keycombo></entry> +<entry>Deletes the current file without asking for +confirmation.</entry> +</row> +<row> +<entry><keycap>F1</keycap></entry> +<entry>Opens the online help (this file)</entry> +</row> +<row> +<entry><keycombo +action="simul">&Ctrl;<keycap>Q</keycap></keycombo></entry> +<entry>Quits &kuickshow;</entry> +</row> +</tbody> +</tgroup> +</table> + +<table> +<title>Browser Window Mouse Usage</title> +<tgroup cols="2"> +<thead> +<row> +<entry>Mouse Usage</entry> +<entry>Action</entry> +</row> +</thead> +<tbody> +<row> +<entry><mousebutton>Left</mousebutton> click</entry> +<entry>Enter a folder, or select an image window.</entry> +</row> +<row> +<entry><mousebutton>Right</mousebutton> click</entry> +<entry>Opens a context menu, with several options.</entry> +</row> +<row> +<entry>Double click</entry> +<entry>Loads the selected image or enters the selected +folder</entry> +</row> +</tbody> +</tgroup> + +</table> + +</sect1> +</chapter> + +<chapter id="credits"> + +<!-- Include credits for the programmers, documentation writers, and +contributors here. The license for your software should then be included below +the credits with a reference to the appropriate license file included in the KDE +distribution. --> + +<title>Credits and License</title> + +<para> +&kuickshow; +</para> +<para> +Program copyright 1998-2002 &Carsten.Pfeiffer; &Carsten.Pfeiffer.mail; +</para> + +<para> +Documentation copyright 2001 &Carsten.Pfeiffer; &Carsten.Pfeiffer.mail; +</para> +<para>Converted to DocBook &XML; and extended by &Lauri.Watts; +&Lauri.Watts.mail;</para> + +<!-- TRANS:CREDIT_FOR_TRANSLATORS --> + +&underFDL; <!-- FDL: do not remove --> + +&underGPL; <!-- GPL License --> + +</chapter> + +<appendix id="installation"> +<title>Installation</title> + +<sect1 id="getting-kuickshow"> +<title>How to obtain &kuickshow;</title> + +&install.intro.documentation; + +</sect1> + +<sect1 id="requirements"> +<title>Requirements</title> + +<para>To be written</para> +<!-- +List any special requirements for your application here. This should include: +.Libraries or other software that is not included in kdesupport, +kdelibs, or kdebase. +.Hardware requirements like amount of RAM, disk space, graphics card +capabilities, screen resolution, special expansion cards, etc. +.Operating systems the app will run on. If your app is designed only for a +specific OS, (you wrote a graphical LILO configurator for example) put this +information here. + + +<para> +In order to successfully use &kuickshow;, you need &kde; 1.1. Foobar.lib is +required in order to support the advanced &kuickshow; features. &kuickshow; uses +about 5 megs of memory to run, but this may vary depending on your +platform and configuration. +</para> + +<para> +All required libraries as well as &kuickshow; itself can be found +on <ulink url="ftp://ftp.kapp.org">The &kuickshow; home page</ulink>. +</para> +--> + +<!-- For a list of updates, you may refer to the application web site +or the ChangeLog file, or ... +<para> +You can find a list of changes at <ulink +url="http://apps.kde.org/kapp">http://apps.kde.org/kapp</ulink>. +</para>--> +</sect1> + +<sect1 id="compilation"> +<title>Compilation and Installation</title> + +&install.compile.documentation; + +</sect1> + +</appendix> + +&documentation.index; +</book> + +<!-- +Local Variables: +mode: sgml +sgml-minimize-attributes:nil +sgml-general-insert-case:lower +sgml-indent-step:0 +sgml-indent-data:nil +End: +--> + diff --git a/doc/kuickshow/screenshot.png b/doc/kuickshow/screenshot.png Binary files differnew file mode 100644 index 0000000..4ba7498 --- /dev/null +++ b/doc/kuickshow/screenshot.png diff --git a/kdegraphics.lsm b/kdegraphics.lsm new file mode 100644 index 0000000..de3824f --- /dev/null +++ b/kdegraphics.lsm @@ -0,0 +1,11 @@ +Begin4 +Title: kdegraphics +Version: 3.5.8 +Entered-date: 2007-10-15 +Description: Graphical Applications written for the K Desktop Environment (KDE) +Keywords: KDE X11 desktop Qt +Author: http://bugs.kde.org/ (KDE Bugtracking System) +Primary-site: http://www.kde.org/download/ +Platforms: Unix, Qt +Copying-policy: GPL, Artistic +End diff --git a/kuickshow/AUTHORS b/kuickshow/AUTHORS new file mode 100644 index 0000000..9e0745f --- /dev/null +++ b/kuickshow/AUTHORS @@ -0,0 +1 @@ +Carsten Pfeiffer <pfeiffer@kde.org> diff --git a/kuickshow/BUGS b/kuickshow/BUGS new file mode 100644 index 0000000..511b33e --- /dev/null +++ b/kuickshow/BUGS @@ -0,0 +1,3 @@ +kdelibs issues: +- The filefinder doesn't work when using the splitted view +- in the detailed view, the filefinder can't highlight files during typing. diff --git a/kuickshow/COPYING b/kuickshow/COPYING new file mode 100644 index 0000000..0b84a43 --- /dev/null +++ b/kuickshow/COPYING @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/kuickshow/ChangeLog b/kuickshow/ChangeLog new file mode 100644 index 0000000..55a198b --- /dev/null +++ b/kuickshow/ChangeLog @@ -0,0 +1,921 @@ +<pre> +Fri Mar 31 02:04:21 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * fixed one of the most long-standing bugs: non-local browsing + (i.e. you can browse remote directories like local ones now, flipping + through the images with PageUp/Down etc., including pre-loading + images) + Browsing through /media should work now, but can be improved by + not"downloading" from there. Framework to do this is there, though. + + * also allow saving to remote URLs + + * fixed image not being completely maximized when opening image in + fullscreen mode + * performance improvement + + * layed groundwork for fixing #48812 and #101986 + + * make sure all temporary files get deleted + +Wed Feb 22 16:02:58 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * make autohide-cursor finally work + +Wed Feb 22 02:14:24 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp, imagewindow.* + remove nextSlideRequested() and prevSlideRequested() patch, you + can already navigate with PageUp/Down. The arrow-keys are used for + scrolling. + +Wed Feb 22 01:31:54 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (KuickShow): + warn before loading >= 10 images at once from the commandline + +Wed Feb 22 01:03:07 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (rotated): + auto-scale image on rotation + +Wed Feb 22 00:01:02 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * add a warning messagebox when zooming to larger than + 4 * desktop area size. The "4*" is configurable in + [GeneralConfiguration] + MaximumZoomFactorByDesktop=4.0 + + +Sun Jan 8 09:47:39 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * fix crash when deleting the last image without having a browser + +Sat Jan 7 23:27:32 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * fix deleting images from image window and browser! + + * support moving to trash and make that the default + + * refactor delayed execution of events/actions (for when the browser window needs to + be loaded lazily) + +Sat Jan 7 22:36:25 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (addAlternativeShortcut): + use F5 as default shortcut for "Reload image", keep Enter as alternative + +Sat Jan 7 22:33:30 2006 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/aboutwidget.cpp: + fixed crash (right-clicking on about widget) + + * made the about widget not always-on-top, but a modal widget, + which prevents error messages from being hidden below the about + widget (i.e. when clicking the homepage link while being offline) + +Sat Aug 25 02:58:31 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (init): + mouse-wheel can switch between images now, per request of + Bill Benken <bilben1@home.com> + + * also fixed the KStdAccel::save() and close() accels not working + in the image window + +Sat Aug 4 03:37:50 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * now completely smooth, flicker-free switching between images + and zooming + + * Reverted again to current kde-common/admin stuff + + * added quit-button to toolbar (also makes Ctrl-Q work) + + * made ChangeLog readable by KHelpCenter + + * commented out benchmark debug output + + * added support for objprelink in the specfile + (copy the tarball to your rpm-dir/SOURCES and rpm -ba kuickshow.spec) + + * Fixed some bugs coming from kdelibs 2.1.x vs. 2.2 handling + Thanks a lot to Robert Charbonneau <etriaph@kdesktop.org> + and another anonymous helper from #kde for testing and useful + feedback. + + * Added patch from Adrian Schroeter <adrian@suse.de> to make it + work with autoconf 2.5x -- Thanks! + +Wed Jul 11 17:19:38 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/filewidget.cpp (initActions): + adopt to KDirOperator's contextmenu (i.e. don't add the "Properties..." + entry when it's already present) + + * src/imagewindow.cpp: + show image size in the caption + + * reverted to admin/* files from KuickShow 0.8 so that users of older + KDE versions can compile it again. + + * cleaned up Imlib configure check + + * made background color in viewer configurable + + * added delete-action again for users of older kdelibs + + * fixed some bugs in the filefinder widget + +Wed Jul 4 01:06:58 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (printImage): + Grmbl. Really fixed printing. It even works now :) + +Tue Jul 3 3:04:18 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * Oups, the behavior of QPrinter::printCommand() has changed. + It returns a null String by default now :-O Fixed. + +Tue Jun 27 15:44:28 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp: + added KTempFile patch from Kevin Lo <kevlo@kde.org> + +Tue May 29 15:20:34 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (updateAccel): + changed accels: + shift-accel is now for removing brightness/contrast/gamma + + removed delete action, now provided by kfile + +Thu Apr 19 23:16:12 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * Integrated Multihead patch from Evan Edwards <evan@onepaper.com> + who was also so kind, to set up a homepage for KuickShow, as well + as a Sourceforge account. See kuickshow.sourceforge.net for details. + + Thanks a lot, Evan! + + Added handcursor from qwertz <kraftw@gmx.de>, thanks a lot! + + * src/imlibwidget.cpp (getKuimage): + hopefully fixed crash reported by Alexxx and linuxphreak: + reorder the kuickimage and file-lists when returning a cached image + +Tue Mar 13 03:16:24 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * added lots of translations from the translation team. + I need to add a KAboutDialog somewhere to give them credit + for their excellent work! + +Fri Mar 9 21:50:12 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (eventFilter): + call our parent class' eventFilter if we don't stop the event + -> moving/rearranging the toolbar works :) + + * caption fixes, show the url in the caption + + * save the visible images on SM shutdown and restore them on restore + + * src/imlibwidget.cpp: + don't delete this from closeEvent, WDestructiveClose does it better + -> sessionmanagement works + + * defaultswidget.cpp: + fix typo found by qwertz + + * add icon for delete, as suggested by Florian + +Thu Mar 8 13:29:17 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (mouseReleaseEvent): + zooming should work properly now: + - the window size is kept + - scrolling the zoomed image works correctly + - the rubber band sort of works (maybe even as good as in 0.6.7) + - respect maxWidth and maxHeight during zoom with the rubberband + + added different icon for image window + + * src/kuickshow.cpp + go into window mode when pressing space in fullscreen mode to show + the browser (always-on-top issue) + + * src/filewidget.cpp + some more ensureItemVisible() + + * installation/spec files fixes + + * added im_palette.pal + +Wed Mar 7 21:25:15 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * doc/en/index.html: + updated english documentation + + * src/imagewindow.cpp + set our nice icon so that kicker can show it in the taskbar for + example. Thanks to Florian for the hint :) + + * i18n fix ( -> degrees), and s/-90/270/, another one from Florian + + * resizeOptimal(): if we don't resize because we already have the right + size, call centerImage() + + * zooming with the mouse works again (still not completely right tho: + - the rubber band is missing + - the size/scrolling does not always match the real imagesize + + * src/filewidget.cpp: + ensureItemVisible() in the browser when browsing with PageUp/PageDown + + * src/kuickshow.cpp: + disable the slideshow action when a slideshow is running + +Wed Mar 7 01:39:34 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (readProperties): + clear the diroperators history stack on startup + + * src/imagewindow.cpp: + update the accelerators when applying new configuration + (delete the old and create a new KAccel, setKeyDict() doesn't + work in our case + + * use QWidget::x11Display() for later multihead support) + + * general cleanup. hmm, this could be added to every entry + in the last days, I guess :} + + * added workaround for relative paths not working in the filefinder + relative _files_ don't work yet, tho. + + * documentation written for the upcoming 0.8pre release + +Mon Mar 5 13:07:59 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (init): + Maximize and close shortcuts, as proposed by Crocodile on IRC. + + * WDestructiveClose in ImlibWidget and close(true) everywhere + +Mon Mar 5 00:12:45 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (slotReplayEvent): + going to the next/previous/... image now also works when started with + an image on the commandline (== no browser available) + Tricky thing: after creating the browser, we can't simply go on, + because the browser doesn't have any files at all (async listing). + So we save the pageUp/pageDown event and replay it when the browser + is ready. + + * fixed Space needed to be hit twice to show the initial browser + + * src/kuickshow.cpp, src/filewidget.cpp (eventFilter) + deleting files works from the filebrowser again, not only from the + image window + + * Makefile.am + build as KLM (kdeinit-loadable-module) to speed up startup + + * hah! Adding two lines makes browsing about twice as fast :) + Well, equally as fast as the KDE1 version at least ;) The new caching + system set the dirty flag wrongly at one place, so the pixmap was + effectively rendered twice per image. + +Sun Mar 4 20:33:44 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (initGUI): + open only one window item in toolbar is honored properly now + (replaced the checkbox in the configdialog) + + * don't pass the KKeyEntryMap to all the image windows, this doesn't + work (and it also crashes after doing it a second time). + Thanks to Florian Hacker for the bugreport :) + + * save the view properties of KDirOperator + + * statusbar looks a bit better now (no fixed size entries anymore) + + * src/kuickio.cpp (deleteFile): + deletion of directories works, now + + * src/imdata.cpp, kuickdata.cpp: + better handling of default values + +Sun Mar 4 13:57:52 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (setFullscreen): + hack around QWidget::move() resizing us -> we just ignore that + resizeEvent. Gives less flicker when switching into window-mode. + + * initial fullscreen mode works again as well (hacking around a kwin + "limitation") + +Sun Mar 4 10:50:23 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickconfigdlg.cpp (KuickConfigDialog): + Keyboard shortcuts configurable for browser and image viewer + + * don't check mimetype in isImage() at the moment, people won't have + mimetypes for .eim and .psd probably + + * removed unused EditDialog + + * Added auto-hide cursor in viewer (doesn't work properly tho) + +Sat Mar 3 02:00:41 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (resizeOptimal): + Honor the window manager decoration in window mode. Now always the + entire window including decoration is visible, no matter how large the + image is. + + * Fixed a scrolling bug when the window was exactly as large as the + desktop (only in fullscreen mode) + + * don't go to the next image when cancelling a deletion of a file or + deletion fails + + * some cleanup + +Thu Mar 1 03:49:11 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (showImage): + positioning is fixed now. Removed processEvents() after move(), + we don't seem to need this anymore. Actually, this was the cause + for bogus geometries. + +Thu Mar 1 02:15:49 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp, src/imlibwidget.cpp: + upScale/downScale mostly works. Some WindowManager positioning + problems are left. + +Tue Feb 27 23:30:11 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (viewerDeleted): + Fixed crash when the only image on the commandline couldn't be loaded + +Sun Feb 25 23:22:30 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * config-dialog works now, everything is saved, loaded and resetting + defaults works, too. All the layout management rewritten (was still + Qt 1.x style). Default Image modifications work, including the preview. + Only need a nice preview image now :) + + * src/imlibwidget.*: + fixed setFlipMode() + + * src/filewidget.cpp (eventFilter): + fixed filefinder completion on first character + filefinder enters directory/opens image upon return now + + * added nice new calibrate.png from qwertz, thanks! + +Wed Jan 10 23:39:14 2001 Carsten Pfeiffer <pfeiffer@kde.org> + + * lots of work... getting closer. Commandline handling is really + fixed now %-} Handles multiple files just fine. The filefinder + sort of works now (only the sort-order is not considered, this + could get hairy, I'm afraid). Added browsing actions to toolbar + and shortcuts. Works quite nicely. + +Fri Nov 3 14:32:53 2000 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (setFullscreen): + cool, no need to workaround kwin's auto-maximization needed, + setMinimumSize() does it! Thanks Matthias Ettrich! + +Fri Nov 3 13:23:41 2000 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/*: + some cleanups here and there + fixed commandline handling (dirs, files, absolute, relative) + made KURLWidget use KURLLabel (and fixed KURLLabel bugs) + +Fri Nov 3 01:49:57 2000 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/*: some more work on the KDE2 port/integration. Workarounds for + kwin's auto-maximization added. Fullscreen works. Moving images inside + the window works properly again. NETWM/KWin handling is better now. + Also better handling of non-loadable files. + + Will make it a kdeinit-loadable module (KLM) for fast startup-times + later. + + Finally using it again reminds me how fast it is compared to, erm, the + other viewers :) + +Thu Aug 31 01:48:55 2000 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/*: started reworking/rewriting the whole stuff to make it KDE2 + ready. Now I have to pay for rewriting so much of kdelibs/kfile... + The good thing is: it's mostly about removing stuff from KuickShow + because the functionality is already in libkfile, now :) + +Tue Sep 28 10:35:39 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (resizeEvent): + ahh, fixed a seldom-happening segfault: when "preload images" was + turned on and kuickshow was started with an image as parameter (so that + the filebrowser was not shown in the beginning), it would segfault + in KuickShow::resizeEvent(). I even got a bugreport about such a + segfault a while ago, but I couldn't reproduce it and neither did the + reporter answer to my mail. + Anyway, this is fixed now. + + * src/imagewindow.cpp (dragEnterEvent): + implemented preliminary drag/drop support from Konqueror + +Sat Sep 25 18:30:32 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp (saveImage): + (hopefully, untested) fixed bug, that an image was not saved with the + current size - the original size was used. Thanks for the report (and + for some other suggestions) go to Hugo Lopes <hugolopes@netc.pt> + + * src/imlibwidget.cpp: + lots of other changes, fixes, there's no sense mentioning them all, as + a lot of stuff is being rewritten/restructured and many things have to + be fixed. + +Tue Sep 14 23:57:18 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imagewindow.cpp: + Ok, finally I took the time to restructure ImlibWidget. + Now there is a simple ImlibWidget, that can load and show images + and there is the powerful ImageWindow, that can do all the stuff, the + previous ImlibWidget did. + There is a nice object-oriented wrapper around ImlibImages named + KuickImage - I hated all those C-functions everywhere. + + Additionally, the ImageWindow has fully configurable key-bindings. + + And thanks to Vitor Fernandes <vitor_fernandes@SoftHome.net> + I got a Brazilian/Portuguese translation for KuickShow + +Tue Jul 27 20:32:09 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (setBusyCursor): + loading an image from disk could take quite some time (e.g. on NFS), + so show a busy cursor during that operation, too. + +Thu Jul 22 21:26:11 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (preloadImage): + Argh, fixed segfault - don't free the cached image, when it is the + current shown image as well (imCache == im). Occured when switching + back and forth between two images + +Fri Jul 16 13:09:07 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kfileview.cpp (refresh): + Oh well, thanks to Robert Hamberger <Robert.Hamberger@AUDI.DE>, I + fixed another (hopefully last, for the next time) segfault. SIGSEGV + happened, when opening the about-dialog, NOT giving the focus back + to the filebrowser and then pressing the "show-hidden-files-button" + twice. + + * src/kuickconfigdlg.cpp (keyPressEvent): + fixed bug: pressing escape in config dialog didn't reenable the + toolbar button to open the dialog + + * src/imlibwidget.cpp (autoRender): + LOTS of updates, the new configuration dialog sort of works now + - all image manipulations can be daisychained now, just call + setAutoRender( false ) and call updateImage() to apply (render) + configuration dialog makes use of this to show the settings in an + example image + - new and nice about dialog, also based on ImlibWidget :o) + + +Wed Jul 7 01:09:14 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (loadImageInternal): + Applied patch from Thorsten Scheuermann <uddn@rz.uni-karlsruhe.de> + (autoscale images to screensize) - thanks! + +Mon Jul 5 15:27:05 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickconfigdlg.cpp (closeEvent): + Eieiei, introduced closeEvent() in configdialog, which just emits + cancelButtonPressed() - otherwise the Toolbarbutton wouldn't get + reenabled. Thanks to Thorsten Scheuermann for the bugreport! + + * src/kuickshow.cpp (deleteFile): + Uh oh, I really thought there were no segfaults in 0.6.6... + Thanks go to Vadim Zaliva, who proved me wrong :-} Just fixed that + core-dump, when trying to delete a directory. + +Fri Jul 2 14:27:08 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (initGUI): + moved some code around to delay creating the filebrowser and reading + the directory contents. If you give a filename on the commandline as + parameter, kuickshow will load the filebrowser first, when you really + want to. + + * src/imlibwidget.cpp (desktopWidth): + kuickhow now honors the panel and window-frame-size when displaying + images in window-mode - the imagesize is properly adjusted in + auto-shrink mode + + * src/imlibwidget.cpp (showImageOriginalSize): + fixed bug in window-mode: displaying image with "o" (original size) + didn't resize the window, if necessary + + * src/kuickshow.cpp (eventFilter): + Bugfix: when did I have that crazy idea to set the palette to black + in the filebrowser??? In certain cases, I got an almost completely + black Messagebox... + + * src/kfileview.cpp (removeItem): + oups... segfault fixed: removing the very first item in the + filebrowser caused crash + +Sat Jun 26 22:47:05 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/fileview.cpp (changeDirDialog): + goto-dialog (ctrl-g) accepts ~ and replaces it with your homedirectory + I love ideas, that can be implemented in half a minute :o) + +Mon May 31 12:08:41 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (setFullscreen): + Save and restore the geometry when switching between fullscreen and + window mode. Much nicer now :o) + + * src/kuickshow.cpp (showImage): + Honor kpanel's placement, when showing the first image. Don't just move + it to (0,0), but use KWM::geometry(). + + * src/imlibwidget.cpp (showImageOriginalSize): + implemented Shortcut "o" to show image in the original size. Useful when + autoscaling is active and you want the original size (e.g. scaled text + is hardly readable). + +Mon May 31 02:24:56 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * updated polish translation, many thanks to Krzysztof P. Jasiutowicz + + * added german documentation, many thanks to Robert Hamberger, + who also enlargened the TODO-list :-P + +Fri May 28 11:48:46 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (mouseMoveEvent, mouseReleaseEvent): + several cleanups (replaced bool shiftPressed with the appropriate + QEvent::state() & ShiftButton in the eventhandlers) + + * fixed bug: Shift + MousePress + MouseRelease without moving the mouse + moved the image to the lower right corner + + * implemented "close image on doubleclick", as suggested by Ralph + Bernecker. Also put Close into popupmenu. + + * improved cache of preloaded image, now stores the actual rendered + Pixmap -> a preloaded image shows almost before you press "next image" + ;-) It can't get faster now. I only could cache more than one pixmap... + hmm, maybe later + + * updated documentation + +Tue May 18 21:19:32 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kfileview.cpp (refresh): + sorting does somehow work. Some code seems to be duplicated in + KFileInfoContents and KDir - both offer sorting. However, both + don't work 100% :-/ Anyway, if you have KDE 1.1.1, sorting should + work, it is disabled for earlier releases, as there was a segfault + problem in kfile (nobody ever seemed to use KFileInfoContent's sorting, + so that was never realized). + + * src/kfileview.cpp, src/fileview.cpp: + some minor fixlets: always try to highlight the last active file, + whenever the directory contents are updated + + * src/kuickconfigdlg.cpp (several): + changed the two KIntLineEdits to more appropriate QSpinBoxes + + * src/imlibwidget.cpp (setFullscreen, several), + * src/kuickshow.cpp (several) + FINALLY got the fullscreen/kpanel thing together + KDE 1.1 introduced KWM::staysOnTop, but unfortunately "on top" meant + "below kpanel". Since KDE 1.1.1, on top means on top :o) Even more + unfortunately, this revealed several problems with focus handling and + other widgets on top of the "top"-widget. So I used a timer, check + the focusevents and tell kwm when to make us the top widget, and when + not. + + * src/imlibwidget.cpp, src/kuickshow.cpp + improved handling of multiple windows - always the window which last + had the focus will load new images + + * src/kuickdata.cpp, src/kuickconfigdlg.cpp, src/kuickshow.cpp + configurable: open all images in one window, or open a new window + +Sat Apr 17 18:43:03 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (setToolbarPosition): + added methods to (re)store the toolbar position + + * src/imlibwidget.cpp: + changed fullscreen code to use the current (and hopefully final) way + KWM does "stayOnTop" + + * src/kuickdata.cpp: + updated file filters (Photoshop psd and bmp) + + * src/kfileview.cpp: + changed the kdir behavior, so that the browser displays files + altogether at once, not incrementally. This also let me (finally, + yippeee :-P) highlight the last direcory, where you came from. + And reading directories is a bit faster now, too. + +Sun Feb 21 16:02:44 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (zoomImage): + added minimum and maximum sizes for zooming images (thanks to + Robert Hamberger for the idea (and for some funny emails :-P)) + + * src/kwm-workaround.h (keepOnTop): + added Matthias' workaround for "always on top"-problem in fullscreen + mode, which was introduced with KWM-changes just before KDE 1.1 + ... too bad it doesn't work :-/ Gotta spend some time finding out, why + + * src/kuickshow.cpp (showImage): + always move the first opened image-window to 0x0 (top left) + (thanks to Andreas Gelezun for the idea) + +Thu Feb 4 11:40:50 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * doc/en/index.html: + updated documentation + +Wed Feb 3 22:43:32 1999 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (KuickShow): + implemented deletion of files (delete/shift-delete/popupmenu) + + fixed quite a few buglets with keyboard navigation (pageUp didn't + halt when a directory was found). pageUp/down and the like shall only + select files. + + worked around kwm-bug (resize doesn't work properly after + KWM::setDecoration( noDecoration ) + +Tue Dec 29 16:55:11 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp, imlibwidget.cpp, kfileview.*: + fixed updating of directory in statusbar and filename in caption of + imlibwidget + + fileview is prepared to support sorting and filtering + + added toggle showing hidden files (accessible via toolbar) + + added Home-Button in toolbar to change to home directory + +Wed Nov 18 15:40:46 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (mouseMoveEvent): + + fixed cursor not being reset to arrorCursor, when shift-key was + released during resize ( == abort resizing ) + +Wed Nov 18 15:09:36 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (saveSettings): + + size of the browserwindow is now saved and restored on next start + +Mon Nov 9 23:16:32 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * hopefully fixed autoconf stuff, which was broken at least on SunOS + Now tries to detect imlib-config and links against + `imlib-config --libs`. If this doesn't work, it links against + every graphics lib of libgif, libjpeg, libtiff and libpng, that + is available. + Another little bug is fixed, any changes (contrast/brightness/gamma) + were not saved when using "save as" + +Sat Nov 7 15:22:18 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp + added changing of brightness, contrast and gamma via keyboard and popup menu + added saving image + the factor, how much brightness/contrast/gamma you change with one click is + only editable in configfile, no dialog, yet. + +Sat Nov 7 12:57:48 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * acinclude.m4 (ac_imlib_config): + added some configure-stuff to use `imlib-config' to determine the libs + to be linked against. + +Sun Oct 11 23:58:46 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (loadImageInternal): + added configuration option to not override the color palette + useful for 8bit displays + + * src/kuickshow.cpp: + fixed segfault when imlib can't load image + (don't preload the next image, then) + +Wed Sep 30 19:39:15 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * acinclude.m4, configure.in: + Added a configure-check for Imlib. Still incomplete (does NOT + check for all those other libs as libgif, libjpeg, libz, ...), + but at least finds libImlibs which are too old. + + src/kuickshow.cpp (about): + about dialog is centered, now + +Fri Sep 25 19:32:13 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (keyPressEvent): + Now behavior of scrolling/zooming with mouse is fixed: + pressing left mousebutton and moving the mouse will move the image + (only if it image is larger than current window) + + Pressing Shift, left mousebutton and moving the mouse will zoom into + the image. Releasing Shift-button before mousebutton will abort zooming + +Thu Sep 24 02:41:26 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (mouseReleaseEvent): + Ahh, finally I got "zoom inside image with mouse" working perfectly. + A rectangle is painted and this rectangle is zoomed and centered. + Not the very best solution, tho, as imlib is zooming the entire + image, not only the selected part... guess how long it can take for + bigger images. + Gotta find another solution later, creating a new imlib image with + just the selected part. + +Tue Sep 22 21:05:58 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (preloadImage): + Added preloading facility. Fills the cache with the next image, so it + will pop up almost instantaneously, when pressing PageUp/Down. + Configurable via dialog. + +Mon Sep 21 16:29:56 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (eventFilter): + Added "Enter-key", that reloads current image (so all zoom/move stuff + is restored to original settings). + +Sun Sep 20 19:04:23 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kfileview.cpp (prev): + whoops, fixed a segfault, when trying to get a kfileinfo of index -1. + I shouldn't check, whether an unsigned int is smaller than 0, which it + actually was. Now uses int. + +Sun Sep 20 13:35:00 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (closeEvent): + reverted to override closeEvent() and changed every occurrence of + close( true ) to close( false ), as closeEvent now explicitely + deletes itself. + This was due to windowmanagers close-button, which should delete widget + +Sun Sep 20 03:08:45 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickshow.cpp (printImage): + added preliminary support for printing + +Sat Sep 19 01:40:22 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (rotate): + added rotate-routine to - doh - rotate an image + +Fri Sep 18 01:08:46 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (scrollImage): + Now changes cursor when attempting to move the image with the mouse + Also, image can be moved now, when in window mode and window is + larger than desktop + +Thu Sep 17 17:25:11 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (setPopupMenu): + the fix for the popupmenu also let me finally delete it without + segfault :o) + +Thu Sep 17 13:13:09 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/kuickconfigdlg.cpp (KuickConfigDialog): + enlargened maxCache lineedit and changed tooltip + + * src/imlibconfig.cpp + changed default value for maxCache from 0 to 10000 (10megs) + + * src/imlibwidget.cpp (scrollImage): + restricted scrolling so that you can move the image only + if it doesn't fit onto the screen. + You can't move the image out of the screen anymore. + + Also fixed a segfault (ugh) in viewerMenu->popup(), as it was + initialized in the wrong place (now in initImlib()). + + +Thu Sep 17 00:11:53 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (loadImage): + re-enabled Imlib_destroy_image() + Found another value in imlib configuration struct, pixmapcachesize + which I wasn't aware of. Now limiting imlib's cache really works :o)) + I'm really happy now :-) Running out of Ram and even Swap is not too + funny ;o) + +Tue Sep 15 20:28:49 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (centerImage): + fixed images not centering when larger than screen and in fullscreen + mode. + + +Tue Sep 15 14:06:27 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (mouseMoveEvent): + scrolling the image with the mouse is now possible. Didn't expect + scrolling would be so smooth :o) + Also added a popupmenu (ImlibWidget::setPopupmenu( bool )) for + the basic features like zoom and flip image + +Mon Sep 14 16:20:30 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/fileview.cpp/.h + * src/kfileview.cpp/.h + * src/kuickshow.cpp + added "change directory" possibility. A dialog asks for a directory + and the fileview is being updated. Either accessible via the + popupmenu, or via Ctrl-g (goto) + + * src/kuickshow.cpp (KuickShow): + once again optimized commandline parsing + +Mon Sep 14 13:24:40 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * funny, I added lots of stuff, moved some other stuff around and + the result is a binary about 30k smaller than before :-D + + * src/fileview.cpp (findCompletion): + *strike* now even filecompletion works :-) If you hit some keys + on your keyboard, while in the filebrowser, a small edit window pops + up in the bottom-right corner. Just type in the first chars of the + filename of the image you want to see, and it will be highlighted. + + * src/kuickshow.cpp, src/imlibwidget.h/.cpp: + Cool. Now, I have only one ImlibData object, so I share imlib's + cache between all open windows. This does not only speed things + up quite a bit, but also reduced memory usage with multiple open + windows. + ImlibWidget therefore has a new constructor, where you can pass the + pointer to the ImlibData object. + + * src/imlibwidget.cpp (ImlibWidget): + now creates an ImlibConfig object itself, when none has been given + in the contructor + +Sun Sep 13 23:28:31 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + * src/imlibwidget.cpp (renderImage): + Don't destroy images ( Imlib_destroy_image() ) anymore. This boosts + browsing a LOT. Showing cached images is almosts instantaneous now! + Hope there's no sideeffect on this :-} + + * src/kuickshow.cpp (eventFilter): + space toggles show()ing and hide()ing the browser now. + If started with image as parameter, kuickshow doesn't show + the browser, hit space to show it. + + * src/fileview.h (class FileView): + findCompletion() is now public, so that I can tell the browser + to highlight the file, supplied via commandline. + + +History: +-------- +- found that xemacs can create much better changelogs :o) +- hacked a lot of goodies into KuickShow, several configuration options +- decided to have a look at the Xlib stuff and found out, how to map + an Imlib image onto any QWidget - this is cool :o) +- too bad, it was not very reliable and it was a mess, too +- with my Xlib non-knowledge, found a way to "swallow" an Imlib image + onto a QWidget - imagine how happy I was :o) +- if Kopacz got Imlib to work, I could do that, too :-P +- end of August 98, saw Adam Kopacz' release of qiv (quick image viewer) + damn, this was my name (kiv, kuick image viewer) :o( +- first tries to use Imlib to display on Qt/KDE widgets in April 98, + too bad, it didn't work :o( +- first hack of kview to use a filebrowser in January +- had the idea for such an app about December 97 +</pre> diff --git a/kuickshow/Makefile.am b/kuickshow/Makefile.am new file mode 100644 index 0000000..e53fd83 --- /dev/null +++ b/kuickshow/Makefile.am @@ -0,0 +1,8 @@ +SUBDIRS = src misc pics + +kuickshow-package: + @export CVSROOT=`cat CVS/Root`; \ + kuickdir=$$PWD; \ + kuickver=`cat src/version.h | grep define | cut -f3 -d' ' | sed -e 's/"//g'`; \ + cd /tmp; \ + cvs2dist `dirname $$kuickdir` kuickshow --remove-hidden --version $$kuickver $$kuickdir/TODO $$kuickdir/BUGS $$kuickdir/kuickshow.lsm $$kuickdir/kuickshow.spec $$kuickshow/../Makefile.cvs diff --git a/kuickshow/README b/kuickshow/README new file mode 100644 index 0000000..e616751 --- /dev/null +++ b/kuickshow/README @@ -0,0 +1,8 @@ +KuickShow v0.8 +Carsten Pfeiffer <pfeiffer@kde.org> +---------------------------------------------------------------------- +KuickShow is a very fast and comfortable imageviewer, somewhat inspired +by ACDSee (early versions :) + +See http://devel-home.kde.org/~pfeiffer/kuickshow/ for updated versions, +see ChangeLog for what has changed. diff --git a/kuickshow/TODO b/kuickshow/TODO new file mode 100644 index 0000000..0f75ec1 --- /dev/null +++ b/kuickshow/TODO @@ -0,0 +1,24 @@ +toolbar in imageviewer + +- Ctrl-S = Save current, Shift-Ctrl-S = Filedialog + +- allow to split browser into subwindows (multiple browsers) +- mouse-usage better (e.g. left button = next image, middle button = previous + image, all configurable) +- anim-gif support (QMovie perhaps) +- cropping images (via Imlib_clone_scaled_image & Imlib_crop_and_clone_image()) +- thumbnail view, treeview +- menubar (same as popupmenu) (abschaltbar) (mac-mode!) + +- configure-dialog: offer a directory to copy files to -> one click copies to it +- rename/delete into popupmenu of imagewindow + +- if image not readable -> no nagscreen, jump to next image +- network transparency with kio + +- small preview in browser window +- bookmarks? +- generate wallpaper (background desktop image) +- display more image information (resolution, color depth, image comments...) +- better slideshow (randomize, pause/continue, reverse, ...) +- what else? diff --git a/kuickshow/configure.in.bot b/kuickshow/configure.in.bot new file mode 100644 index 0000000..ef8aaf9 --- /dev/null +++ b/kuickshow/configure.in.bot @@ -0,0 +1,9 @@ +if test -z "$LIB_IMLIB"; then + echo "" + echo "You're missing Imlib 1.x. The graphics browser/viewer KuickShow" + echo "won't be compiled without Imlib." + echo "You can download it from" + echo "http://freshmeat.net/redir/imlib/4385/url_tgz/imlib-1.9.10.tar.gz" + echo "" + all_tests=bad +fi diff --git a/kuickshow/configure.in.in b/kuickshow/configure.in.in new file mode 100644 index 0000000..fb1f043 --- /dev/null +++ b/kuickshow/configure.in.in @@ -0,0 +1,69 @@ +#MIN_CONFIG + +#AM_INIT_AUTOMAKE(kuickshow,0.8.2) + +# my own additions to KDE's version +# +# checking for Imlib... + +AC_DEFUN([KDE_FIND_IMLIB_CONFIG], + [AC_MSG_CHECKING([for imlib-config]) + +imlib_config_given=NO +ac_imlib_config="" + +AC_ARG_WITH(imlib-config, +AC_HELP_STRING([--with-imlib-config=DIR],[directory where "imlib-config" is located]), +[ ac_imlib_config="$withval/imlib-config" + imlib_config_given=yes +]) + +if test "$imlib_config_given" = "yes"; then + if test ! -r $ac_imlib_config; then + AC_MSG_RESULT(wrong file specified) + ac_imlib_config="" + else + AC_MSG_RESULT($ac_imlib_config) + LIB_IMLIB=`$ac_imlib_config --libs` + AC_SUBST(LIB_IMLIB) + fi +else + ac_imlib_config=`which imlib-config 2>/dev/null` + if test -z "$ac_imlib_config"; then + AC_MSG_RESULT(no) + else + dummy=`echo "$ac_imlib_config" | grep '/imlib-config'` + if test -z "$dummy"; then + AC_MSG_RESULT(no) + ac_imlib_config="" + else + LIB_IMLIB=`$ac_imlib_config --libs` + IMLIB_CFLAGS=`$ac_imlib_config --cflags` + imlib_config=`echo "$LIB_IMLIB" | grep lImlib` + if test -z "$imlib_config"; then + AC_MSG_RESULT(no) + ac_imlib_config="" + else + AC_SUBST(LIB_IMLIB) + AC_SUBST(IMLIB_CFLAGS) + AC_MSG_RESULT($ac_imlib_config) + fi + fi + fi +fi + +]) + +dnl #### now some kuickshow stuff ### +dnl Check if Imlib is installed properly +KDE_PKG_CHECK_MODULES(IMLIB, imlib >= 1.9.10, + LIB_IMLIB=$IMLIB_LIBS + AC_SUBST(LIB_IMLIB) +, +KDE_FIND_IMLIB_CONFIG +) + +if test -z "$LIB_IMLIB"; then +dnl AC_MSG_ERROR([You need to install Imlib 1.x, e.g. http://freshmeat.net/redir/imlib/4385/url_tgz/imlib-1.9.10.tar.gz if your distributor doesn't have a package]) + DO_NOT_COMPILE="$DO_NOT_COMPILE kuickshow" +fi diff --git a/kuickshow/kuickshow.lsm b/kuickshow/kuickshow.lsm new file mode 100644 index 0000000..4872440 --- /dev/null +++ b/kuickshow/kuickshow.lsm @@ -0,0 +1,18 @@ +Begin3 +Title: KuickShow +Version: 0.8.5 +Entered-date: August 2001 +Description: KuickShow is a very fast image viewer, that lets you easily + browse large galleries. A builtin filebrowser and manager + is also available. Usage is somewhat inspired by ACDSee. +Keywords: KDE Qt Graphics Images Imageviewer Imlib +Author: Carsten Pfeiffer <pfeiffer@kde.org> +Maintained-by: Carsten Pfeiffer <pfeiffer@kde.org> +Home-page: http://devel-home.kde.org/~pfeiffer/kuickshow/ +Alternate-site: ftp://ftp.kde.org/pub/kde/stable/apps/graphics/ +Primary-site: http://devel-home.kde.org/~pfeiffer/kuickshow/ + xxxxxx kuickshow-0.8.5.tar.gz + xxx kuickshow-0.8.5.lsm +Platform: Unix. Needs Qt >= 3.0.4, KDE (kdelibs) >= 3.0 and Imlib 1.x +Copying-policy: GPL +End diff --git a/kuickshow/kuickshow.spec b/kuickshow/kuickshow.spec new file mode 100644 index 0000000..0fcba9e --- /dev/null +++ b/kuickshow/kuickshow.spec @@ -0,0 +1,69 @@ +%define version 0.8.5 +%define release 1 +%define serial 1 +%define prefix /opt/kde3 + +Name: kuickshow +Summary: KuickShow -- A very fast image viewer/browser +Version: %{version} +Release: %{release} +Serial: %{serial} +Source: http://devel-home.kde.org/~pfeiffer/kuickshow/kuickshow-%{version}.tar.gz +URL: http://devel-home.kde.org/~pfeiffer/kuickshow/ +Copyright: GPL +Packager: Carsten Pfeiffer <pfeiffer@kde.org> +Group: X11/KDE/Graphics +BuildRoot: /tmp/kuickshow-%{version}-root +Prefix: %{prefix} + +%description +KuickShow is a very fast image viewer, that lets you easily +browse large galleries. A builtin filebrowser and manager +is also available. Usage is somewhat inspired by ACDSee. +It supports many fileformats, e.g. jpeg, gif, png, psd, bmp, +tiff, xpm, xbm, xcf, eim, ... + +KuickShow has a nice user interface, that allows you to browse large amounts +of images in a short time. It can zoom, mirror, rotate images, adjust +brightness, contrast and gamma and can do a slideshow, of course. +It is fully configurable through dialogs. + +Besides that, it offers a nice filebrowser with basic filemanager capabilities +like renaming, deleting, creating directories, ... + +Install with '--prefix $KDEDIR' unless you have the kde-config program. + +%prep +rm -rf $RPM_BUILD_ROOT + +%setup -n kuickshow-%{version} + +%build +PREFIX="" +which kde-config || PREFIX=%{prefix} +if test -z "$PREFIX"; then + PREFIX=`kde-config --prefix` +fi + +export KDEDIR="$PREFIX" +CXXFLAGS="$RPM_OPT_FLAGS -fno-exceptions -pipe" LDFLAGS=-s ./configure --prefix="$PREFIX" --enable-final --disable-debug +mkdir -p $RPM_BUILD_ROOT +make + +%install +make install DESTDIR=$RPM_BUILD_ROOT + +cd $RPM_BUILD_ROOT + +find . -type d | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' > $RPM_BUILD_DIR/file.list.%{name} + +find . -type f | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name} + +find . -type l | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name} + +%clean +rm -rf $RPM_BUILD_ROOT +rm -f $RPM_BUILD_DIR/file.list.%{name} + +%files -f ../file.list.%{name} + diff --git a/kuickshow/misc/Makefile.am b/kuickshow/misc/Makefile.am new file mode 100644 index 0000000..caea8ab --- /dev/null +++ b/kuickshow/misc/Makefile.am @@ -0,0 +1,2 @@ +pal_DATA = im_palette.pal +paldir = $(kde_datadir)/kuickshow diff --git a/kuickshow/misc/im_palette.pal b/kuickshow/misc/im_palette.pal new file mode 100644 index 0000000..9a243f7 --- /dev/null +++ b/kuickshow/misc/im_palette.pal @@ -0,0 +1,64 @@ +0x0 0x0 0x0 +0xff 0xff 0xff +0xff 0x0 0x0 +0xff 0xff 0x0 +0x0 0xff 0x0 +0x0 0x0 0xff +0x0 0xff 0xff +0x99 0x99 0x99 +0xff 0x88 0x0 +0x88 0x0 0x0 +0x0 0x88 0x88 +0x88 0x88 0x0 +0xff 0xcc 0x97 +0xbb 0xbb 0xbb +0x9f 0x6b 0x42 +0x55 0x55 0x55 +0xdd 0xdd 0xdd +0x77 0x77 0x77 +0x33 0x33 0x33 +0xcc 0x0 0x0 +0xff 0x44 0x0 +0xff 0xcc 0x0 +0xcc 0xcc 0x0 +0x60 0x60 0x0 +0x0 0x43 0x0 +0x0 0x7f 0x0 +0x0 0xcc 0x0 +0x0 0x44 0x44 +0x0 0x0 0x44 +0x0 0x0 0x88 +0xef 0xb1 0x7b +0xdf 0x98 0x5f +0xbf 0x87 0x56 +0x7f 0x57 0x26 +0x5f 0x39 0xc +0x3f 0x1c 0x0 +0x21 0x0 0x0 +0x0 0x43 0x87 +0x2d 0x70 0xaf +0x5a 0x9e 0xd7 +0x87 0xcc 0xff +0xff 0xe0 0xba +0x21 0x43 0xf +0x3d 0x5d 0x25 +0x59 0x78 0x3a +0x75 0x93 0x4f +0x91 0xae 0x64 +0xad 0xc8 0x7a +0xf0 0xa8 0xef +0xd0 0x88 0xd0 +0xaf 0x66 0xaf +0x8e 0x44 0x8e +0x6d 0x22 0x6d +0x4b 0x0 0x4b +0xff 0xc0 0xbc +0xff 0x93 0x91 +0xff 0x66 0x67 +0xd8 0xf2 0xbf +0xff 0xc9 0x68 +0xff 0x96 0x67 +0xa5 0x60 0xff +0x51 0xff 0x99 +0x3f 0xa5 0x63 +0x98 0x90 0x67 diff --git a/kuickshow/pics/Makefile.am b/kuickshow/pics/Makefile.am new file mode 100644 index 0000000..198327f --- /dev/null +++ b/kuickshow/pics/Makefile.am @@ -0,0 +1,7 @@ +# Add all of your pixmaps here +pics_DATA = calibrate.png kuickshow-day.jpg kuickshow-night.jpg logo.png \ + imageviewer-medium.png imageviewer-small.png handcursor.png \ + ksslide.png about.png + +# This is where it will all be installed +picsdir = $(kde_datadir)/kuickshow/pics diff --git a/kuickshow/pics/about.png b/kuickshow/pics/about.png Binary files differnew file mode 100644 index 0000000..500c296 --- /dev/null +++ b/kuickshow/pics/about.png diff --git a/kuickshow/pics/arrows.png b/kuickshow/pics/arrows.png Binary files differnew file mode 100644 index 0000000..2099de9 --- /dev/null +++ b/kuickshow/pics/arrows.png diff --git a/kuickshow/pics/calibrate.png b/kuickshow/pics/calibrate.png Binary files differnew file mode 100644 index 0000000..c5d9efc --- /dev/null +++ b/kuickshow/pics/calibrate.png diff --git a/kuickshow/pics/handcursor.png b/kuickshow/pics/handcursor.png Binary files differnew file mode 100644 index 0000000..423c1f7 --- /dev/null +++ b/kuickshow/pics/handcursor.png diff --git a/kuickshow/pics/imageviewer-medium.png b/kuickshow/pics/imageviewer-medium.png Binary files differnew file mode 100644 index 0000000..9429e8f --- /dev/null +++ b/kuickshow/pics/imageviewer-medium.png diff --git a/kuickshow/pics/imageviewer-small.png b/kuickshow/pics/imageviewer-small.png Binary files differnew file mode 100644 index 0000000..859af8f --- /dev/null +++ b/kuickshow/pics/imageviewer-small.png diff --git a/kuickshow/pics/ksslide.png b/kuickshow/pics/ksslide.png Binary files differnew file mode 100644 index 0000000..19fab6b --- /dev/null +++ b/kuickshow/pics/ksslide.png diff --git a/kuickshow/pics/kuickshow-day.jpg b/kuickshow/pics/kuickshow-day.jpg Binary files differnew file mode 100644 index 0000000..b257e42 --- /dev/null +++ b/kuickshow/pics/kuickshow-day.jpg diff --git a/kuickshow/pics/kuickshow-night.jpg b/kuickshow/pics/kuickshow-night.jpg Binary files differnew file mode 100644 index 0000000..67282c8 --- /dev/null +++ b/kuickshow/pics/kuickshow-night.jpg diff --git a/kuickshow/pics/logo.png b/kuickshow/pics/logo.png Binary files differnew file mode 100644 index 0000000..eac07b7 --- /dev/null +++ b/kuickshow/pics/logo.png diff --git a/kuickshow/src/Makefile.am b/kuickshow/src/Makefile.am new file mode 100644 index 0000000..57c9238 --- /dev/null +++ b/kuickshow/src/Makefile.am @@ -0,0 +1,31 @@ +## Makefile.am for kuickshow + +bin_PROGRAMS = +lib_LTLIBRARIES = +kdeinit_LTLIBRARIES = kuickshow.la + +# set the include path for X, qt and KDE +INCLUDES = $(all_includes) +KDE_CXXFLAGS = $(IMLIB_CFLAGS) +METASOURCES = AUTO + +kuickshow_la_LDFLAGS = $(all_libraries) -module -avoid-version +kuickshow_la_LIBADD = $(LIB_KDEPRINT) $(LIB_IMLIB) +kuickshow_la_SOURCES = kuickshow.cpp \ + aboutwidget.cpp generalwidget.cpp kuickconfigdlg.cpp main.cpp \ + defaultswidget.cpp imagewindow.cpp kuickdata.cpp \ + imdata.cpp filefinder.cpp kurlwidget.cpp filewidget.cpp \ + kuick.cpp imlibwidget.cpp slideshowwidget.cpp printing.cpp \ + kuickfile.cpp kuickimage.cpp filecache.cpp + +# if you "make distclean", this files get removed. If you want to remove +# them while "make clean", use CLEANFILES +DISTCLEANFILES = $(METASOURCES) + +messages: + $(XGETTEXT) *.cpp *.h -o $(podir)/kuickshow.pot + +KDE_ICON = kuickshow + + # this is where the kdelnk file will go +xdg_apps_DATA = kuickshow.desktop diff --git a/kuickshow/src/aboutwidget.cpp b/kuickshow/src/aboutwidget.cpp new file mode 100644 index 0000000..2ae4110 --- /dev/null +++ b/kuickshow/src/aboutwidget.cpp @@ -0,0 +1,95 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qdatetime.h> +#include <qevent.h> +#include <qglobal.h> +#include <qgroupbox.h> +#include <qlabel.h> + +#include <kwin.h> +#include <kstandarddirs.h> + +#include "imlibwidget.h" +#include "kurlwidget.h" +#include "version.h" + +#include "aboutwidget.h" + +AboutWidget::AboutWidget( QWidget *parent, const char *name ) + : QVBox( parent, name, Qt::WShowModal ) +{ + KWin::setType( winId(), NET::Override ); + KWin::setState( winId(), NET::SkipTaskbar ); + + setFrameStyle( WinPanel | Raised ); + + QGroupBox *gBox = new QGroupBox( 1, Horizontal, this); + gBox->setGeometry( 10, 10, width()-20, height()-20 ); + gBox->setAlignment( AlignHCenter ); + gBox->installEventFilter( this ); + + gBox->setPalette( QPalette( QColor( white ) ) ); + gBox->setBackgroundMode( PaletteBackground ); + + int hour = QTime::currentTime().hour(); + QString file; + + if ( hour >= 10 && hour < 16 ) + file = locate("appdata", "pics/kuickshow-day.jpg"); + else + file = locate("appdata", "pics/kuickshow-night.jpg"); + + QLabel *authors = new QLabel("Kuickshow " KUICKSHOWVERSION + " was brought to you by", gBox); + authors->setAlignment( AlignCenter ); + + m_homepage = new KURLWidget("Carsten Pfeiffer", gBox); + m_homepage->setURL( "http://devel-home.kde.org/~pfeiffer/kuickshow/" ); + m_homepage->setAlignment( AlignCenter ); + + QLabel *copy = new QLabel("(C) 1998-2006", gBox); + copy->setAlignment( AlignCenter ); + + ImlibWidget *im = new ImlibWidget( 0L, gBox, "KuickShow Logo" ); + if ( im->loadImage( file ) ) + im->setFixedSize( im->width(), im->height() ); + else { + delete im; + im = 0L; + qWarning( "KuickShow: about-image not found/unreadable." ); + } +} + +AboutWidget::~AboutWidget() +{ +} + +bool AboutWidget::eventFilter( QObject *o, QEvent *e ) +{ + if ( e->type() == QEvent::MouseButtonPress ) { + QMouseEvent *ev = static_cast<QMouseEvent*>( e ); + if ( !m_homepage->geometry().contains( ev->pos() ) ) { + deleteLater(); + return true; + } + } + + return QVBox::eventFilter( o, e ); +} +#include "aboutwidget.moc" diff --git a/kuickshow/src/aboutwidget.h b/kuickshow/src/aboutwidget.h new file mode 100644 index 0000000..b9bc79d --- /dev/null +++ b/kuickshow/src/aboutwidget.h @@ -0,0 +1,43 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef ABOUTWIDGET_H +#define ABOUTWIDGET_H + +#include <qevent.h> +#include <qvbox.h> + +class KURLWidget; + +class AboutWidget : public QVBox +{ + Q_OBJECT + +public: + AboutWidget(QWidget *parent = 0, const char *name = 0); + +protected: + ~AboutWidget(); + bool eventFilter( QObject*, QEvent * ); + +private: + KURLWidget *m_homepage; + +}; + +#endif diff --git a/kuickshow/src/defaultswidget.cpp b/kuickshow/src/defaultswidget.cpp new file mode 100644 index 0000000..6980725 --- /dev/null +++ b/kuickshow/src/defaultswidget.cpp @@ -0,0 +1,282 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qcheckbox.h> +#include <qgroupbox.h> +#include <qlabel.h> +#include <qlayout.h> +#include <qvgroupbox.h> + +#include <kcombobox.h> +#include <kdialog.h> +#include <klocale.h> +#include <knuminput.h> +#include <kstandarddirs.h> + +#include "imlibwidget.h" +#include "defaultswidget.h" + +DefaultsWidget::DefaultsWidget( QWidget *parent, const char *name) + : QWidget( parent, name ) +{ + imFiltered = 0L; + + cbEnableMods = new QCheckBox( i18n("Apply default image modifications"), this ); + connect( cbEnableMods, SIGNAL( toggled(bool) ), SLOT( enableWidgets(bool) )); + + // create all the widgets + + gbScale = new QGroupBox( i18n("Scaling"), this ); + gbScale->setColumnLayout( 0, Qt::Horizontal ); + + cbDownScale = new QCheckBox( i18n("Shrink image to screen size, if larger"), + gbScale, "shrinktoscreen" ); + + cbUpScale = new QCheckBox( i18n("Scale image to screen size, if smaller, up to factor:"), gbScale, "upscale checkbox" ); + + sbMaxUpScaleFactor = new KIntNumInput( gbScale, "upscale factor" ); + sbMaxUpScaleFactor->setRange( 1, 100, 1, false ); + + connect(cbUpScale, SIGNAL( toggled(bool)), sbMaxUpScaleFactor, + SLOT( setEnabled(bool) )); + + // -- + + gbGeometry = new QGroupBox( i18n("Geometry"), this ); + gbGeometry->setColumnLayout( 0, Qt::Horizontal ); + + cbFlipVertically = new QCheckBox( i18n("Flip vertically"), gbGeometry ); + + cbFlipHorizontally = new QCheckBox( i18n("Flip horizontally"), gbGeometry ); + + lbRotate = new QLabel( i18n("Rotate image:"), gbGeometry ); + + comboRotate = new KComboBox( gbGeometry, "rotate combobox" ); + comboRotate->insertItem( i18n("0 Degrees") ); + comboRotate->insertItem( i18n("90 Degrees") ); + comboRotate->insertItem( i18n("180 Degrees") ); + comboRotate->insertItem( i18n("270 Degrees") ); + + // -- + + gbAdjust = new QVGroupBox( i18n("Adjustments"), this ); + + sbBrightness = new KIntNumInput( gbAdjust, "brightness spinbox" ); + sbBrightness->setRange( -256, 256, 1, true ); + sbBrightness->setLabel( i18n("Brightness:"), AlignVCenter ); + + sbContrast = new KIntNumInput( sbBrightness, 0,gbAdjust, 10, + "contrast spinbox"); + sbContrast->setRange( -256, 256, 1, true ); + sbContrast->setLabel( i18n("Contrast:"), AlignVCenter ); + + sbGamma = new KIntNumInput( sbContrast, 0, gbAdjust, 10, "gamma spinbox" ); + sbGamma->setRange( -256, 256, 1, true ); + sbGamma->setLabel( i18n("Gamma:"), AlignVCenter ); + + // -- + + gbPreview = new QGroupBox( i18n("Preview"), this ); + gbPreview->setAlignment( AlignCenter ); + + lbImOrig = new QLabel( i18n("Original"), gbPreview ); + imOrig = new ImlibWidget( 0L, gbPreview, "original image" ); + + lbImFiltered = new QLabel( i18n("Modified"), gbPreview ); + imFiltered = new ImlibWidget( 0L, imOrig->getImlibData(), gbPreview, "" ); + connect( imFiltered, SIGNAL( destroyed() ), SLOT( slotNoImage() )); + + //// + //////////////// + + + // layout management + QVBoxLayout *mainLayout = new QVBoxLayout( this, 0, + KDialog::spacingHint(), "main layout" ); + + QVBoxLayout *gbScaleLayout = new QVBoxLayout( gbScale->layout(), + KDialog::spacingHint()); + QVBoxLayout *gbGeometryLayout = new QVBoxLayout(gbGeometry->layout(), + KDialog::spacingHint()); + QGridLayout *gbPreviewLayout = new QGridLayout(gbPreview, 2, 3, 0, + KDialog::spacingHint()); + + QHBoxLayout *scaleLayout = new QHBoxLayout(); + QHBoxLayout *rotateLayout = new QHBoxLayout(); + + mainLayout->addWidget( cbEnableMods ); + mainLayout->addWidget( gbScale ); + QHBoxLayout *hl = new QHBoxLayout(); + hl->addWidget( gbGeometry ); + hl->addWidget( gbAdjust ); + mainLayout->addLayout( hl ); + mainLayout->addWidget( gbPreview ); + mainLayout->addStretch(); + + // -- + + gbScaleLayout->addWidget( cbDownScale ); + gbScaleLayout->addLayout( scaleLayout ); + + scaleLayout->addWidget( cbUpScale ); + scaleLayout->addWidget( sbMaxUpScaleFactor ); + + // -- + + gbGeometryLayout->addWidget( cbFlipVertically, 0, AlignLeft ); + gbGeometryLayout->addWidget( cbFlipHorizontally, 0, AlignLeft ); + gbGeometryLayout->addLayout( rotateLayout, 0 ); + + rotateLayout->addWidget( lbRotate, 0, AlignLeft ); + rotateLayout->addWidget( comboRotate, 0, AlignLeft ); + + // -- + + gbPreviewLayout->setMargin( 10 ); + gbPreviewLayout->setSpacing( KDialog::spacingHint() ); + gbPreviewLayout->addWidget( lbImOrig, 0, 0, AlignCenter ); + gbPreviewLayout->addWidget( imOrig, 1, 0, AlignCenter | AlignTop ); + gbPreviewLayout->addWidget( lbImFiltered, 0, 2, AlignCenter ); + gbPreviewLayout->addWidget( imFiltered, 1, 2, AlignCenter | AlignTop ); + + + //// + //////////////// + + // connect them all to the update slot + connect( cbDownScale, SIGNAL( clicked() ), SLOT( updatePreview() )); + connect( cbUpScale, SIGNAL( clicked() ), SLOT( updatePreview() )); + connect( cbFlipVertically, SIGNAL( clicked() ), SLOT( updatePreview() )); + connect( cbFlipHorizontally, SIGNAL( clicked() ), SLOT( updatePreview() )); + connect( sbMaxUpScaleFactor, SIGNAL( valueChanged(int) ), SLOT( updatePreview() )); + connect( sbBrightness, SIGNAL( valueChanged(int) ), SLOT( updatePreview() )); + connect( sbContrast, SIGNAL( valueChanged(int) ), SLOT( updatePreview() )); + connect( sbGamma, SIGNAL( valueChanged(int) ), SLOT( updatePreview() )); + + connect( comboRotate, SIGNAL( activated(int) ), SLOT( updatePreview() )); + + + QString filename = locate( "data", "kuickshow/pics/calibrate.png" ); + if ( !imOrig->loadImage( filename ) ) + imOrig = 0L; // FIXME - display some errormessage! + if ( !imFiltered->loadImage( filename ) ) + imFiltered = 0L; // FIXME - display some errormessage! + + loadSettings( *kdata ); + + if ( imOrig ) + imOrig->setFixedSize( imOrig->size() ); + if ( imFiltered ) + imFiltered->setFixedSize( imFiltered->size() ); + + mainLayout->activate(); +} + + +DefaultsWidget::~DefaultsWidget() +{ + // those need to be deleted in the right order, as imFiltered + // references ImlibData from imOrig + delete imFiltered; + delete imOrig; +} + +void DefaultsWidget::loadSettings( const KuickData& data ) +{ + cbDownScale->setChecked( data.downScale ); + cbUpScale->setChecked( data.upScale ); + sbMaxUpScaleFactor->setValue( data.maxUpScale ); + + cbFlipVertically->setChecked( data.flipVertically ); + cbFlipHorizontally->setChecked( data.flipHorizontally ); + + comboRotate->setCurrentItem( data.rotation ); + + ImData *id = data.idata; + + sbBrightness->setValue( id->brightness ); + sbContrast->setValue( id->contrast ); + sbGamma->setValue( id->gamma ); + + cbEnableMods->setChecked( data.isModsEnabled ); + enableWidgets( data.isModsEnabled ); + + updatePreview(); +} + +void DefaultsWidget::applySettings( KuickData& data ) +{ + data.isModsEnabled = cbEnableMods->isChecked(); + + data.downScale = cbDownScale->isChecked(); + data.upScale = cbUpScale->isChecked(); + data.maxUpScale = sbMaxUpScaleFactor->value(); + + data.flipVertically = cbFlipVertically->isChecked(); + data.flipHorizontally = cbFlipHorizontally->isChecked(); + + data.rotation = currentRotation(); + + ImData *id = data.idata; + + id->brightness = sbBrightness->value(); + id->contrast = sbContrast->value(); + id->gamma = sbGamma->value(); +} + +void DefaultsWidget::updatePreview() +{ + if ( !imFiltered ) + return; + + imFiltered->setAutoRender( false ); + + int flipMode = cbFlipHorizontally->isChecked() ? FlipHorizontal : FlipNone; + flipMode |= cbFlipVertically->isChecked() ? FlipVertical : FlipNone; + imFiltered->setFlipMode( flipMode ); + + Rotation rotation = cbEnableMods->isChecked() ? currentRotation() : ROT_0; + imFiltered->setRotation( rotation ); + + imFiltered->setBrightness( sbBrightness->value() ); + imFiltered->setContrast( sbContrast->value() ); + imFiltered->setGamma( sbGamma->value() ); + + imFiltered->updateImage(); + imFiltered->setAutoRender( true ); +} + + +void DefaultsWidget::enableWidgets( bool enable ) +{ + gbScale->setEnabled( enable ); + sbMaxUpScaleFactor->setEnabled( enable & cbUpScale->isChecked() ); + + gbGeometry->setEnabled( enable ); + gbAdjust->setEnabled( enable ); + gbPreview->setEnabled( enable ); + updatePreview(); +} + + +Rotation DefaultsWidget::currentRotation() const +{ + return (Rotation) comboRotate->currentItem(); +} + +#include "defaultswidget.moc" diff --git a/kuickshow/src/defaultswidget.h b/kuickshow/src/defaultswidget.h new file mode 100644 index 0000000..3febb09 --- /dev/null +++ b/kuickshow/src/defaultswidget.h @@ -0,0 +1,73 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef DEFAULTSWIDGET_H +#define DEFAULTSWIDGET_H + +#include "kuickdata.h" + +class ImlibWidget; +class ImData; + +class QCheckBox; +class QLabel; + +class KComboBox; +class KIntNumInput; + +class DefaultsWidget : public QWidget +{ + Q_OBJECT + +public: + DefaultsWidget( QWidget *parent, const char *name ); + ~DefaultsWidget(); + + void loadSettings( const KuickData& data ); + void applySettings( KuickData& data ); + +private: + Rotation currentRotation() const; + + QCheckBox *cbEnableMods; + + QGroupBox *gbScale; + QCheckBox *cbUpScale, *cbDownScale; + KIntNumInput *sbMaxUpScaleFactor; + + QGroupBox *gbAdjust; + KIntNumInput *sbBrightness, *sbContrast, *sbGamma; + + QGroupBox *gbGeometry; + QLabel *lbRotate; + KComboBox *comboRotate; + QCheckBox *cbFlipVertically, *cbFlipHorizontally; + + QGroupBox *gbPreview; + QLabel *lbImOrig, *lbImFiltered; + ImlibWidget *imOrig, *imFiltered; + + +private slots: + void updatePreview(); + void slotNoImage() { imFiltered = 0L; } + void enableWidgets( bool ); + +}; + +#endif diff --git a/kuickshow/src/filecache.cpp b/kuickshow/src/filecache.cpp new file mode 100644 index 0000000..c1c1aff --- /dev/null +++ b/kuickshow/src/filecache.cpp @@ -0,0 +1,83 @@ +#include <unistd.h> + +#include <qstring.h> + +#include <kdebug.h> +#include <kstandarddirs.h> +#include <ktempdir.h> + +#include "filecache.h" + +FileCache * FileCache::s_self; + +FileCache::FileCache() + : m_limit( 0 ), + m_tempDir( 0L ) +{ + m_files.setAutoDelete( true ); + m_files.setMaxCost( 100 ); // good default? ### make configurable? +} + +FileCache::~FileCache() +{ + delete m_tempDir; +} + +void FileCache::shutdown() +{ + if ( s_self ) + { + delete s_self; + s_self = 0L; + } +} + +FileCache * FileCache::self() +{ + if ( !s_self ) + s_self = new FileCache(); + return s_self; +} + +KuickFile * FileCache::getFile( const KURL& url ) +{ + QString urlString = url.prettyURL(); + KuickFile *file = m_files.find( urlString ); + if ( !file ) { + file = new KuickFile( url ); + m_files.insert( urlString, file ); + } + + return file; +} + +QString FileCache::tempDir() +{ + if ( !m_tempDir ) { + m_tempDir = createTempDir(); + + if ( !m_tempDir ) { + kdWarning() << "Unable to create temporary directory for KuickShow" << endl; + return QString::null; + } + } + + return m_tempDir->name(); +} + + +KTempDir * FileCache::createTempDir() +{ + QString tmpName = QString::fromLatin1( KGlobal::instance()->instanceName() ); + tmpName.append( QString::number( getpid() ) ); + QString dirName = locateLocal( "tmp", tmpName ); + KTempDir *dir = new KTempDir( dirName ); + dir->setAutoDelete( true ); + if ( dir->status() != 0L ) + { + delete dir; + return 0L; + } + + return dir; +} diff --git a/kuickshow/src/filecache.h b/kuickshow/src/filecache.h new file mode 100644 index 0000000..16e5326 --- /dev/null +++ b/kuickshow/src/filecache.h @@ -0,0 +1,47 @@ +/**************************************************************************** +** $Id: .emacs,v 1.3 2006/02/20 15:06:53 gis Exp $ +** +** Created : 2006 +** +** Copyright (C) 2006 Carsten Pfeiffer <pfeiffer@kde.org> +** +****************************************************************************/ + +#ifndef FILECACHE_H +#define FILECACHE_H + +#include <qcache.h> + +#include "kuickfile.h" + +class KTempDir; + +class FileCache +{ +public: + static FileCache * self(); + static void shutdown(); + + KuickFile * getFile( const KURL& url ); + void setLimit( int numFiles ); + int getLimit() const { return m_limit; } + + /** + * @return the temporary directory or QString::null if none available + */ + QString tempDir(); + +private: + static FileCache *s_self; + FileCache(); + ~FileCache(); + + KTempDir * createTempDir(); + QCache<KuickFile> m_files; + + int m_limit; + KTempDir *m_tempDir; + +}; + +#endif // FILECACHE_H diff --git a/kuickshow/src/filefinder.cpp b/kuickshow/src/filefinder.cpp new file mode 100644 index 0000000..dda5e51 --- /dev/null +++ b/kuickshow/src/filefinder.cpp @@ -0,0 +1,100 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qkeycode.h> + +#include <kapplication.h> +#include <kconfig.h> +#include <kglobal.h> +#include <kcompletionbox.h> +#include <kurlcompletion.h> + +#include "filefinder.h" + +FileFinder::FileFinder( QWidget *parent, const char *name ) + : KLineEdit( parent, name ) +{ + // make this widget just as large, as the font is + 8 Pixels + int height = fontMetrics().height() + 8; + setFixedSize( 150, height ); + setFrame( true ); + + setHandleSignals( true ); // we want the completionbox signals +#if KDE_VERSION >= 220 + completionBox()->setTabHandling( true ); +#endif + connect( completionBox(), SIGNAL( userCancelled(const QString&) ), + SLOT( hide() )); + connect( completionBox(), SIGNAL( activated( const QString& ) ), + SLOT( slotAccept( const QString& ))); + connect( this, SIGNAL( returnPressed( const QString& )), + SLOT( slotAccept( const QString& ) )); + + KURLCompletion *comp = new KURLCompletion(); + comp->setReplaceHome( true ); + comp->setReplaceEnv( true ); + setCompletionObject( comp, false ); + setAutoDeleteCompletionObject( true ); + setFocusPolicy( ClickFocus ); + + KConfig *config = KGlobal::config(); + KConfigGroupSaver cs( config, "GeneralConfiguration" ); + setCompletionMode( (KGlobalSettings::Completion) + config->readNumEntry( "FileFinderCompletionMode", + KGlobalSettings::completionMode())); +} + +FileFinder::~FileFinder() +{ + KConfig *config = KGlobal::config(); + KConfigGroupSaver cs( config, "GeneralConfiguration" ); + config->writeEntry( "FileFinderCompletionMode", completionMode() ); +} + +void FileFinder::focusOutEvent( QFocusEvent *e ) +{ + if ( e->reason() != QFocusEvent::Popup ) + hide(); +} + +void FileFinder::keyPressEvent( QKeyEvent *e ) +{ + int key = e->key(); + if ( key == Key_Escape ) { + hide(); + e->accept(); + } + + else { + KLineEdit::keyPressEvent( e ); + } +} + +void FileFinder::hide() +{ + KLineEdit::hide(); + parentWidget()->setFocus(); +} + +void FileFinder::slotAccept( const QString& dir ) +{ + hide(); + emit enterDir( dir ); +} + +#include "filefinder.moc" diff --git a/kuickshow/src/filefinder.h b/kuickshow/src/filefinder.h new file mode 100644 index 0000000..f75c69a --- /dev/null +++ b/kuickshow/src/filefinder.h @@ -0,0 +1,54 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef FILEFINDER_H +#define FILEFINDER_H + +#include <qevent.h> + +#include <klineedit.h> + +class KURLCompletion; + +class FileFinder : public KLineEdit +{ + Q_OBJECT + +public: + FileFinder( QWidget *parent=0, const char *name=0 ); + ~FileFinder(); + + KURLCompletion *completion() { + return static_cast<KURLCompletion*>( completionObject() ); + } + + virtual void hide(); + +signals: + void enterDir( const QString& ); + +protected: + virtual void focusOutEvent( QFocusEvent * ); + virtual void keyPressEvent( QKeyEvent * ); + +private slots: + void slotAccept( const QString& ); + +}; + +#endif // FILEFINDER_H diff --git a/kuickshow/src/filewidget.cpp b/kuickshow/src/filewidget.cpp new file mode 100644 index 0000000..d4b99f0 --- /dev/null +++ b/kuickshow/src/filewidget.cpp @@ -0,0 +1,464 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qkeycode.h> + +#include <kdeversion.h> +#include <kglobal.h> +#include <kglobalsettings.h> +#include <klocale.h> +#include <kpopupmenu.h> +#include <kpropertiesdialog.h> +#include <kurlcompletion.h> + +#include "filefinder.h" +#include "filewidget.h" +#include "kuickdata.h" +#include "kuickshow.h" + +#ifdef KeyPress +#undef KeyPress +#endif + +FileWidget::FileWidget( const KURL& url, QWidget *parent, const char *name ) + : KDirOperator( url, parent, name ), + m_validCompletion( false ), + m_fileFinder( 0L ) +{ + setEnableDirHighlighting( true ); + +#if KDE_VERSION >= 310 + setViewConfig( KGlobal::config(), "Filebrowser" ); +#endif + readConfig( KGlobal::config(), "Filebrowser" ); + setView( KFile::Default ); + + // setOnlyDoubleClickSelectsFiles( true ); + reloadConfiguration(); + + completionObject()->setCompletionMode( KGlobalSettings::CompletionAuto ); + dirCompletionObject()->setCompletionMode( KGlobalSettings::CompletionAuto); + + slotViewChanged(); + connect( this, SIGNAL( viewChanged( KFileView * )), + SLOT( slotViewChanged() )); + + connect( dirLister(), SIGNAL( clear() ), SLOT( slotItemsCleared() )); + connect( dirLister(), SIGNAL( deleteItem( KFileItem * ) ), + SLOT( slotItemDeleted( KFileItem *) )); + + connect( this, SIGNAL( fileHighlighted( const KFileItem * )), + SLOT( slotHighlighted( const KFileItem * ))); + + connect( this, SIGNAL(urlEntered(const KURL&)), + SLOT( slotURLEntered( const KURL& ))); + + // should actually be KDirOperator's job! + connect( this, SIGNAL( finishedLoading() ), SLOT( slotFinishedLoading() )); +} + +FileWidget::~FileWidget() +{ + delete m_fileFinder; +} + +void FileWidget::initActions() +{ + int index = 0; + KActionCollection *coll = actionCollection(); + KActionSeparator *sep = new KActionSeparator( coll, "kuicksep" ); + KActionMenu *menu = static_cast<KActionMenu*>( coll->action("popupMenu") ); + + menu->insert( coll->action("kuick_showInOtherWindow"), index++ ); + menu->insert( coll->action("kuick_showInSameWindow"), index++ ); + menu->insert( coll->action("kuick_showFullscreen"), index++ ); + menu->insert( sep, index++ ); + + // support for older kdelibs, remove somewhen... + if ( coll->action("kuick_delete") ) + menu->insert( coll->action("kuick_delete"), 9 ); + + // properties dialog is now in kfile, but not at the right position, + // so we move it to the real bottom + menu->remove( coll->action( "properties" ) ); + + QPopupMenu *pMenu = menu->popupMenu(); + int lastItemId = pMenu->idAt( pMenu->count() - 1 ); + QMenuItem *mItem = pMenu->findItem( lastItemId ); + if ( mItem && !mItem->isSeparator() ) + menu->insert( sep ); + + // those at the bottom + menu->insert( coll->action("kuick_print") ); + menu->insert( sep ); + menu->insert( coll->action("properties") ); +} + +void FileWidget::reloadConfiguration() +{ + if ( kdata->fileFilter != nameFilter() ) { + // At first, our list must have folders + QStringList mimes; + mimes.append("inode/directory"); + + // Then, all the images! + KMimeType::List l = KMimeType::allMimeTypes(); + for (KMimeType::List::iterator it = l.begin(); it != l.end(); ++it) + if ((*it)->name().startsWith( "image/" )) + mimes.append( (*it)->name() ); + + // Ok, show what we've done + setMimeFilter (mimes); + updateDir(); + } +} + +bool FileWidget::hasFiles() const +{ + return (numFiles() > 0); +} + +void FileWidget::activatedMenu( const KFileItem *item, const QPoint& pos ) +{ + bool image = isImage( item ); + actionCollection()->action("kuick_showInSameWindow")->setEnabled( image ); + actionCollection()->action("kuick_showInOtherWindow")->setEnabled( image ); + actionCollection()->action("kuick_showFullscreen")->setEnabled( image ); + actionCollection()->action("kuick_print")->setEnabled( image ); + actionCollection()->action("properties")->setEnabled( item ); + + bool hasSelection = (item != 0L); + if ( actionCollection()->action("kuick_delete") ) + actionCollection()->action("kuick_delete")->setEnabled( hasSelection ); + + KDirOperator::activatedMenu( item, pos ); +} + +void FileWidget::findCompletion( const QString& text ) +{ + if ( text.at(0) == '/' || text.at(0) == '~' || + text.find('/') != -1 ) { + QString t = m_fileFinder->completion()->makeCompletion( text ); + + if (m_fileFinder->completionMode() == KGlobalSettings::CompletionPopup || + m_fileFinder->completionMode() == KGlobalSettings::CompletionPopupAuto) + m_fileFinder->setCompletedItems( + m_fileFinder->completion()->allMatches() ); + else + if ( !t.isNull() ) + m_fileFinder->setCompletedText( t ); + + return; + } + + QString file = makeDirCompletion( text ); + if ( file.isNull() ) + file = makeCompletion( text ); + + m_validCompletion = !file.isNull(); + + if ( m_validCompletion ) + KDirOperator::setCurrentItem( file ); +} + +bool FileWidget::eventFilter( QObject *o, QEvent *e ) +{ + if ( e->type() == QEvent::KeyPress ) { + QKeyEvent *k = static_cast<QKeyEvent*>( e ); + + if ( (k->state() & (ControlButton | AltButton)) == 0 ) { + int key = k->key(); + if ( actionCollection()->action("delete")->shortcut().contains( key ) ) + { + k->accept(); + KFileItem *item = getCurrentItem( false ); + if ( item ) { + KFileItemList list; + list.append( item ); + del( list, (k->state() & ShiftButton) == 0 ); + } + return true; + } + + const QString& text = k->text(); + if ( !text.isEmpty() && text.unicode()->isPrint() ) { + k->accept(); + + if ( !m_fileFinder ) { + m_fileFinder = new FileFinder( this, "file finder" ); + connect( m_fileFinder, SIGNAL( completion(const QString&)), + SLOT( findCompletion( const QString& ))); + connect( m_fileFinder, + SIGNAL( enterDir( const QString& ) ), + SLOT( slotReturnPressed( const QString& ))); + m_fileFinder->move( width() - m_fileFinder->width(), + height() - m_fileFinder->height() ); + } + + bool first = m_fileFinder->isHidden(); + + m_fileFinder->setText( text ); + m_fileFinder->raise(); + m_fileFinder->show(); + m_fileFinder->setFocus(); + if ( first ) + findCompletion( text ); + + return true; + } + } + + k->ignore(); + } + return KDirOperator::eventFilter( o, e ); +} + + +// KIO::NetAccess::stat() does NOT give us the right mimetype, while +// KIO::NetAccess::mimetype() does. So we have this hacklet to tell +// showImage that the KFileItem is really an image. +#define IS_IMAGE 5 +#define MY_TYPE 55 + +bool FileWidget::isImage( const KFileItem *item ) +{ +// return item && !item->isDir(); + if ( item ) + { + return item->isReadable() && item->mimetype().startsWith( "image/") || + item->extraData( (void*) MY_TYPE ) == (void*) IS_IMAGE; + } + return false; +} + +void FileWidget::setImage( KFileItem& item, bool enable ) +{ + if ( enable ) + item.setExtraData( (void*) MY_TYPE, (void*) IS_IMAGE ); + else + item.removeExtraData( (void*) MY_TYPE ); +} + +KFileItem * FileWidget::gotoFirstImage() +{ + KFileItemListIterator it( *(fileView()->items()) ); + + while ( it.current() ) { + if ( isImage( it.current() ) ) { + setCurrentItem( it.current() ); + return it.current(); + } + ++it; + } + + return 0L; +} + +KFileItem * FileWidget::gotoLastImage() +{ + KFileItemListIterator it( *(fileView()->items()) ); + it.toLast(); + + while ( it.current() ) { + if ( isImage( it.current() ) ) { + setCurrentItem( it.current() ); + return it.current(); + } + --it; + } + + return 0L; +} + +KFileItem * FileWidget::getNext( bool go ) +{ + KFileItem *item = getItem( Next, true ); + if ( item ) { + if ( go ) + setCurrentItem( item ); + return item; + } + + return 0L; +} + +KFileItem * FileWidget::getPrevious( bool go ) +{ + KFileItem *item = getItem( Previous, true ); + if ( item ) { + if ( go ) + setCurrentItem( item ); + return item; + } + + return 0L; +} + +// returns 0L when there is no previous/next item/image +// this sucks! Use KFileView::currentFileItem() when implemented +KFileItem * FileWidget::getItem( WhichItem which, bool onlyImage ) const +{ + KFileItemListIterator it( *(fileView()->items()) ); + + while ( it.current() ) { // find the iterator to the current item + if ( it.current()->url() == m_currentURL ) + break; + + ++it; + } + + if ( it.current() ) { + switch ( which ) { + case Previous: { + --it; + while ( it.current() ) { + if ( isImage( it.current() ) || !onlyImage ) + return it.current(); + --it; + } + return 0L; // no previous item / image + } + + case Next: { + ++it; + while ( it.current() ) { + if ( isImage( it.current() ) || !onlyImage ) + return it.current(); + ++it; + } + return 0L; // no further item / image + } + + case Current: + default: + return it.current(); + } + } + + return 0L; +} + +void FileWidget::slotViewChanged() +{ + fileView()->widget()->installEventFilter( this ); +} + +void FileWidget::slotItemsCleared() +{ + m_currentURL = QString::null; +} + +void FileWidget::slotItemDeleted( KFileItem *item ) +{ + KFileItem *current = getCurrentItem( false ); + if ( item != current ) { + return; // all ok, we already have a new current item + } + + KFileItem *next = getNext(); + if ( !next ) + next = getPrevious(); + + if ( next ) + m_currentURL = next->url().url(); +} + +void FileWidget::slotHighlighted( const KFileItem *item ) +{ + m_currentURL = item->url().url(); +} + +void FileWidget::slotReturnPressed( const QString& t ) +{ + // we need a / at the end, otherwise replacedPath() will cut off the dir, + // assuming it is a filename + QString text = t; + if ( text.at( text.length()-1 ) != '/' ) + text += '/'; + + if ( text.at(0) == '/' || text.at(0) == '~' ) { + QString dir = m_fileFinder->completion()->replacedPath( text ); + + KURL url; + url.setPath( dir ); + setURL( url, true ); + } + + else if ( text.find('/') != (int) text.length() -1 ) { // relative path + QString dir = m_fileFinder->completion()->replacedPath( text ); + KURL u( url(), dir ); + setURL( u, true ); + } + + else if ( m_validCompletion ) { + KFileItem *item = getCurrentItem( true ); + + if ( item ) { + if ( item->isDir() ) + setURL( item->url(), true ); + else + emit fileSelected( item ); + } + } +} + +void FileWidget::setCurrentItem( const KFileItem *item ) +{ + if ( item ) { + fileView()->setCurrentItem( item ); + fileView()->ensureItemVisible( item ); + } +} + +void FileWidget::setInitialItem( const QString& filename ) +{ + m_initialName = filename; +} + +void FileWidget::slotURLEntered( const KURL& url ) +{ + if ( m_fileFinder ) + m_fileFinder->completion()->setDir( url.path() ); +} + +void FileWidget::slotFinishedLoading() +{ + KFileItem *current = getCurrentItem( false ); + if ( !m_initialName.isEmpty() ) + setCurrentItem( m_initialName ); + else if ( !current ) + setCurrentItem( view()->items()->getFirst() ); + + m_initialName = QString::null; + emit finished(); +} + +QSize FileWidget::sizeHint() const +{ + return QSize( 300, 300 ); +} + +void FileWidget::resizeEvent( QResizeEvent *e ) +{ + KDirOperator::resizeEvent( e ); + if ( m_fileFinder ) + m_fileFinder->move( width() - m_fileFinder->width(), + height() - m_fileFinder->height() ); +} + +#include "filewidget.moc" diff --git a/kuickshow/src/filewidget.h b/kuickshow/src/filewidget.h new file mode 100644 index 0000000..a785fd8 --- /dev/null +++ b/kuickshow/src/filewidget.h @@ -0,0 +1,98 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef FILEWIDGET_H +#define FILEWIDGET_H + +#include <qevent.h> + +#include <kdiroperator.h> + +class FileFinder; +class KFileItem; + +class FileWidget : public KDirOperator +{ + Q_OBJECT + +public: + enum WhichItem { Previous, Next, Current }; + + FileWidget( const KURL& url, QWidget *parent = 0L, const char *name = 0L ); + ~FileWidget(); + + bool hasFiles() const; + void reloadConfiguration(); + + void setInitialItem( const QString& filename ); + + KFileItem *getCurrentItem( bool onlyImage ) const { + return getItem( Current, onlyImage ); + } + + void setCurrentItem( const KFileItem * ); + void setCurrentItem( const QString& filename ) { + KDirOperator::setCurrentItem( filename ); + } + + KFileItem * gotoFirstImage(); + KFileItem * gotoLastImage(); + KFileItem * getNext( bool go=true ); + KFileItem * getPrevious( bool go=true ); + + + KFileItem *getItem( WhichItem which, bool onlyImage ) const; + + static bool isImage( const KFileItem * ); + static void setImage( KFileItem& item, bool enable ); + + void initActions(); + +signals: + void finished(); + +protected: + virtual bool eventFilter( QObject *o, QEvent * ); + virtual void resizeEvent( QResizeEvent * ); + virtual void activatedMenu( const KFileItem *, const QPoint& ); + virtual QSize sizeHint() const; + +private slots: + void slotReturnPressed( const QString& text ); + void findCompletion( const QString& ); + void slotViewChanged(); + + void slotItemsCleared(); + void slotItemDeleted( KFileItem * ); + void slotHighlighted( const KFileItem * ); + + void slotURLEntered( const KURL& url ); + void slotFinishedLoading(); + +private: + KFileView * fileView() const { return (KFileView*) view(); } + + bool m_validCompletion; + FileFinder *m_fileFinder; + QString m_currentURL; + QString m_initialName; + +}; + + +#endif // FILEWIDGET_H diff --git a/kuickshow/src/generalwidget.cpp b/kuickshow/src/generalwidget.cpp new file mode 100644 index 0000000..3b718d6 --- /dev/null +++ b/kuickshow/src/generalwidget.cpp @@ -0,0 +1,163 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qcheckbox.h> +#include <qlabel.h> +#include <qlayout.h> +#include <qtooltip.h> +#include <qvgroupbox.h> + +#include <kapplication.h> +#include <kcolorbutton.h> +#include <kdialog.h> +#include <kiconloader.h> +#include <klineedit.h> +#include <klocale.h> +#include <knuminput.h> +#include <kurllabel.h> + +#include "generalwidget.h" + +GeneralWidget::GeneralWidget( QWidget *parent, const char *name ) + : QWidget( parent, name ) +{ + QVBoxLayout *layout = new QVBoxLayout( this ); + layout->setSpacing( KDialog::spacingHint() ); + + QPixmap pixmap = UserIcon( "logo" ); + KURLLabel *logo = new KURLLabel( this ); + logo->setURL( "http://devel-home.kde.org/~pfeiffer/kuickshow/" ); + logo->setPixmap( pixmap ); + logo->setFixedSize( pixmap.size() ); + logo->setTipText( i18n( "Open KuickShow Website" ) ); + logo->setUseTips( true ); + + connect( logo, SIGNAL( leftClickedURL( const QString & ) ), + SLOT( slotURLClicked( const QString & ) ) ); + + layout->addWidget( logo, 0, AlignRight ); + + cbFullscreen = new QCheckBox( i18n("Fullscreen mode"), this, "boscreen" ); + + cbPreload = new QCheckBox( i18n("Preload next image"), this, "preload"); + cbLastdir = new QCheckBox( i18n("Remember last folder"), this, "restart_lastdir"); + + QGridLayout *gridLayout = new QGridLayout( 2, 2 ); + gridLayout->setSpacing( KDialog::spacingHint() ); + QLabel *l0 = new QLabel( i18n("Background color:"), this ); + colorButton = new KColorButton( this ); + + QLabel *l1 = new QLabel( i18n("Show only files with extension: "), this, "label" ); + editFilter = new KLineEdit( this, "filteredit" ); + + gridLayout->addWidget( l0, 0, 0 ); + gridLayout->addWidget( colorButton, 0, 1 ); + gridLayout->addWidget( l1, 1, 0 ); + gridLayout->addWidget( editFilter, 1, 1 ); + + layout->addWidget( cbFullscreen ); + layout->addWidget( cbPreload ); + layout->addWidget( cbLastdir ); + layout->addLayout( gridLayout ); + + //////////////////////////////////////////////////////////////////////// + + QVGroupBox *gbox2 = new QVGroupBox( i18n("Quality/Speed"), + this, "qualitybox" ); + layout->addWidget( gbox2 ); + layout->addStretch(); + + cbSmoothScale = new QCheckBox( i18n("Smooth scaling"), gbox2, "smoothscale" ); + cbFastRender = new QCheckBox( i18n("Fast rendering"), gbox2, "fastrender" ); + cbDither16bit = new QCheckBox( i18n("Dither in HiColor (15/16bit) modes"), + gbox2, "dither16bit" ); + + cbDither8bit = new QCheckBox( i18n("Dither in LowColor (<=8bit) modes"), + gbox2, "dither8bit" ); + + cbOwnPalette = new QCheckBox( i18n("Use own color palette"), + gbox2, "pal"); + connect( cbOwnPalette, SIGNAL( clicked() ), this, SLOT( useOwnPalette() ) ); + + cbFastRemap = new QCheckBox( i18n("Fast palette remapping"), gbox2, "remap"); + + maxCacheSpinBox = new KIntNumInput( gbox2, "editmaxcache" ); + maxCacheSpinBox->setLabel( i18n("Maximum cache size: "), AlignVCenter ); + maxCacheSpinBox->setSuffix( i18n( " MB" ) ); + maxCacheSpinBox->setSpecialValueText( i18n( "Unlimited" ) ); + maxCacheSpinBox->setRange( 0, 400, 1 ); + + loadSettings( *kdata ); + cbFullscreen->setFocus(); +} + +GeneralWidget::~GeneralWidget() +{ +} + +void GeneralWidget::slotURLClicked( const QString & url ) +{ + kapp->invokeBrowser( url ); +} + +void GeneralWidget::loadSettings( const KuickData& data ) +{ + ImData *idata = data.idata; + + colorButton->setColor( data.backgroundColor ); + editFilter->setText( data.fileFilter ); + cbFullscreen->setChecked( data.fullScreen ); + cbPreload->setChecked( data.preloadImage ); + cbLastdir->setChecked( data.startInLastDir ); + cbFastRemap->setChecked( idata->fastRemap ); + cbOwnPalette->setChecked( idata->ownPalette ); + cbSmoothScale->setChecked( idata->smoothScale ); + cbFastRender->setChecked( idata->fastRender ); + cbDither16bit->setChecked( idata->dither16bit ); + cbDither8bit->setChecked( idata->dither8bit ); + maxCacheSpinBox->setValue( idata->maxCache / 1024 ); + + useOwnPalette(); // enable/disable remap-checkbox +} + +void GeneralWidget::applySettings( KuickData& data) +{ + ImData *idata = data.idata; + + data.backgroundColor = colorButton->color(); + data.fileFilter = editFilter->text(); + data.fullScreen = cbFullscreen->isChecked(); + data.preloadImage = cbPreload->isChecked(); + data.startInLastDir = cbLastdir->isChecked(); + + idata->smoothScale = cbSmoothScale->isChecked(); + idata->fastRemap = cbFastRemap->isChecked(); + idata->ownPalette = cbOwnPalette->isChecked(); + idata->fastRender = cbFastRender->isChecked(); + idata->dither16bit = cbDither16bit->isChecked(); + idata->dither8bit = cbDither8bit->isChecked(); + + idata->maxCache = (uint) maxCacheSpinBox->value() * 1024; +} + +void GeneralWidget::useOwnPalette() +{ + cbFastRemap->setEnabled( cbOwnPalette->isChecked() ); +} + +#include "generalwidget.moc" diff --git a/kuickshow/src/generalwidget.h b/kuickshow/src/generalwidget.h new file mode 100644 index 0000000..e39eef1 --- /dev/null +++ b/kuickshow/src/generalwidget.h @@ -0,0 +1,62 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef GENERALWIDGET_H +#define GENERALWIDGET_H + +#include <qwidget.h> + +#include "kuickdata.h" + +class QCheckBox; +class KColorButton; +class KLineEdit; +class KIntNumInput; + + +class GeneralWidget : public QWidget +{ + Q_OBJECT + +public: + GeneralWidget( QWidget *parent, const char *name ); + ~GeneralWidget(); + + void loadSettings( const KuickData& data ); + void applySettings( KuickData& data ); + +private: + QCheckBox *cbFullscreen, *cbActiveWindow, *cbPreload, *cbLastdir; + QCheckBox *cbSmoothScale, *cbFastRemap, *cbFastRender; + QCheckBox *cbDither16bit, *cbDither8bit, *cbOwnPalette; + + KLineEdit *editFilter; + KIntNumInput *maxCacheSpinBox; + + KIntNumInput *sbMaxWidth, *sbMaxHeight; + KIntNumInput *sbZoomFactor; + + KColorButton *colorButton; + +private slots: + void useOwnPalette(); + void slotURLClicked( const QString & ); + +}; + +#endif diff --git a/kuickshow/src/hi16-app-kuickshow.png b/kuickshow/src/hi16-app-kuickshow.png Binary files differnew file mode 100644 index 0000000..6ece692 --- /dev/null +++ b/kuickshow/src/hi16-app-kuickshow.png diff --git a/kuickshow/src/hi22-app-kuickshow.png b/kuickshow/src/hi22-app-kuickshow.png Binary files differnew file mode 100644 index 0000000..d542bcb --- /dev/null +++ b/kuickshow/src/hi22-app-kuickshow.png diff --git a/kuickshow/src/hi32-app-kuickshow.png b/kuickshow/src/hi32-app-kuickshow.png Binary files differnew file mode 100644 index 0000000..fdd3a5b --- /dev/null +++ b/kuickshow/src/hi32-app-kuickshow.png diff --git a/kuickshow/src/imagewindow.cpp b/kuickshow/src/imagewindow.cpp new file mode 100644 index 0000000..c63a3c6 --- /dev/null +++ b/kuickshow/src/imagewindow.cpp @@ -0,0 +1,1251 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2006 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <stdlib.h> + +#include <qcheckbox.h> +#include <qcursor.h> +#include <qdrawutil.h> +#include <qfileinfo.h> +#include <qkeycode.h> +#include <qpainter.h> +#include <qpen.h> +#include <qpopupmenu.h> + +#ifdef KDE_USE_FINAL +#undef GrayScale +#undef Color +#endif +#include <qrect.h> +#include <qstring.h> +#include <qstringlist.h> +#include <qtimer.h> + +#include <kapplication.h> +#include <kconfig.h> +#include <kcursor.h> +#include <kdebug.h> +#include <kdeversion.h> +#ifdef KDE_USE_FINAL +#undef Unsorted +#endif +#include <kfiledialog.h> +#include <kiconloader.h> +#include <kimageeffect.h> +#include <klocale.h> +#include <kmessagebox.h> +#include <kprinter.h> +#include <kpropertiesdialog.h> +#include <kstdaccel.h> +#include <kstdguiitem.h> +#include <kstandarddirs.h> +#include <kglobalsettings.h> +#include <ktempfile.h> +#include <kwin.h> +#include <netwm.h> +#include <kurldrag.h> +#include <kio/netaccess.h> + +#include "filecache.h" +#include "imagewindow.h" +#include "kuick.h" +#include "kuickdata.h" +#include "kuickfile.h" +#include "kuickimage.h" +#include "printing.h" + + +#undef GrayScale + +QCursor *ImageWindow::s_handCursor = 0L; + +ImageWindow::ImageWindow( ImData *_idata, ImlibData *id, QWidget *parent, + const char *name ) + : ImlibWidget( _idata, id, parent, name ) +{ + init(); +} + +ImageWindow::ImageWindow( ImData *_idata, QWidget *parent, const char *name ) + : ImlibWidget( _idata, parent, name ) +{ + init(); +} + +ImageWindow::~ImageWindow() +{ +} + + +void ImageWindow::init() +{ + setFocusPolicy( QWidget::StrongFocus ); + + KCursor::setAutoHideCursor( this, true, true ); + KCursor::setHideCursorDelay( 1500 ); + + // give the image window a different WM_CLASS + XClassHint hint; + hint.res_name = const_cast<char*>( kapp->name() ); + hint.res_class = const_cast<char*>( "ImageWindow" ); + XSetClassHint( x11Display(), winId(), &hint ); + + viewerMenu = 0L; + gammaMenu = 0L; + brightnessMenu = 0L; + contrastMenu = 0L; + + + m_actions = new KActionCollection( this ); + + if ( !s_handCursor ) { + QString file = locate( "appdata", "pics/handcursor.png" ); + if ( !file.isEmpty() ) + s_handCursor = new QCursor( file ); + else + s_handCursor = new QCursor( arrowCursor ); + } + + setupActions(); + imageCache->setMaxImages( kdata->maxCachedImages ); + + transWidget = 0L; + myIsFullscreen = false; + + xpos = 0, ypos = 0; + m_numHeads = ScreenCount( x11Display() ); + + setAcceptDrops( true ); + setBackgroundColor( kdata->backgroundColor ); + + static QPixmap imageIcon = UserIcon( "imageviewer-medium" ); + static QPixmap miniImageIcon = UserIcon( "imageviewer-small" ); + KWin::setIcons( winId(), imageIcon, miniImageIcon ); +} + +void ImageWindow::updateActions() +{ + m_actions->readShortcutSettings(); +} + +void ImageWindow::setupActions() +{ + new KAction( i18n("Show Next Image"), KStdAccel::next(), + this, SLOT( slotRequestNext() ), + m_actions, "next_image" ); + new KAction( i18n("Show Previous Image"), KStdAccel::prior(), + this, SLOT( slotRequestPrevious() ), + m_actions, "previous_image" ); + + new KAction( i18n("Delete Image"), SHIFT + Key_Delete, + this, SLOT( imageDelete() ), + m_actions, "delete_image" ); + new KAction( i18n("Move Image to Trash"), Key_Delete, + this, SLOT( imageTrash() ), + m_actions, "trash_image" ); + + new KAction( i18n("Zoom In"), Key_Plus, + this, SLOT( zoomIn() ), + m_actions, "zoom_in" ); + new KAction( i18n("Zoom Out"), Key_Minus, + this, SLOT( zoomOut() ), + m_actions, "zoom_out" ); + new KAction( i18n("Restore Original Size"), Key_O, + this, SLOT( showImageOriginalSize() ), + m_actions, "original_size" ); + new KAction( i18n("Maximize"), Key_M, + this, SLOT( maximize() ), + m_actions, "maximize" ); + + new KAction( i18n("Rotate 90 Degrees"), Key_9, + this, SLOT( rotate90() ), + m_actions, "rotate90" ); + new KAction( i18n("Rotate 180 Degrees"), Key_8, + this, SLOT( rotate180() ), + m_actions, "rotate180" ); + new KAction( i18n("Rotate 270 Degrees"), Key_7, + this, SLOT( rotate270() ), + m_actions, "rotate270" ); + + new KAction( i18n("Flip Horizontally"), Key_Asterisk, + this, SLOT( flipHoriz() ), + m_actions, "flip_horicontally" ); + new KAction( i18n("Flip Vertically"), Key_Slash, + this, SLOT( flipVert() ), + m_actions, "flip_vertically" ); + + new KAction( i18n("Print Image..."), KStdAccel::print(), + this, SLOT( printImage() ), + m_actions, "print_image" ); + KStdAction::saveAs( this, SLOT( saveImage() ), + m_actions, "save_image_as" ); + + KStdAction::close( this, SLOT( close() ), + m_actions, "close_image" ); + // -------- + new KAction( i18n("More Brightness"), Key_B, + this, SLOT( moreBrightness() ), + m_actions, "more_brightness" ); + new KAction( i18n("Less Brightness"), SHIFT + Key_B, + this, SLOT( lessBrightness() ), + m_actions, "less_brightness" ); + new KAction( i18n("More Contrast"), Key_C, + this, SLOT( moreContrast() ), + m_actions, "more_contrast" ); + new KAction( i18n("Less Contrast"), SHIFT + Key_C, + this, SLOT( lessContrast() ), + m_actions, "less_contrast" ); + new KAction( i18n("More Gamma"), Key_G, + this, SLOT( moreGamma() ), + m_actions, "more_gamma" ); + new KAction( i18n("Less Gamma"), SHIFT + Key_G, + this, SLOT( lessGamma() ), + m_actions, "less_gamma" ); + + // -------- + new KAction( i18n("Scroll Up"), Key_Up, + this, SLOT( scrollUp() ), + m_actions, "scroll_up" ); + new KAction( i18n("Scroll Down"), Key_Down, + this, SLOT( scrollDown() ), + m_actions, "scroll_down" ); + new KAction( i18n("Scroll Left"), Key_Left, + this, SLOT( scrollLeft() ), + m_actions, "scroll_left" ); + new KAction( i18n("Scroll Right"), Key_Right, + this, SLOT( scrollRight() ), + m_actions, "scroll_right" ); + // -------- + new KAction( i18n("Pause Slideshow"), Key_P, + this, SLOT( pauseSlideShow() ), + m_actions, "kuick_slideshow_pause" ); + + KAction *fullscreenAction = KStdAction::fullScreen(this, SLOT( toggleFullscreen() ), m_actions, 0 ); + + KAction *reloadAction = new KAction( i18n("Reload Image"), KStdAccel::shortcut(KStdAccel::Reload), + this, SLOT( reload() ), + m_actions, "reload_image" ); + + new KAction( i18n("Properties"), ALT + Key_Return, + this, SLOT( slotProperties() ), + m_actions, "properties" ); + + m_actions->readShortcutSettings(); + + // Unfortunately there is no KAction::setShortcutDefault() :-/ + // so add Key_Return as fullscreen shortcut _after_ readShortcutSettings() + addAlternativeShortcut(fullscreenAction, Key_Return); + addAlternativeShortcut(reloadAction, Key_Enter); +} + +void ImageWindow::addAlternativeShortcut(KAction *action, int key) +{ + KShortcut cut( action->shortcut() ); + if (cut == action->shortcutDefault()) { + cut.append(KKey(key)); + action->setShortcut(cut); + } +} + +void ImageWindow::showWindow() +{ + if ( myIsFullscreen ) + showFullScreen(); + else + showNormal(); +} + +void ImageWindow::setFullscreen( bool enable ) +{ + xpos = 0; ypos = 0; + +// if ( enable && !myIsFullscreen ) { // set Fullscreen +// showFullScreen(); +// } +// else if ( !enable && myIsFullscreen ) { // go into window mode +// showNormal(); +// } + + myIsFullscreen = enable; +// centerImage(); // ### really necessary (multihead!) +} + + +void ImageWindow::updateGeometry( int imWidth, int imHeight ) +{ +// qDebug("::updateGeometry: %i, %i", imWidth, imHeight); + // XMoveWindow( x11Display(), win, 0, 0 ); + XResizeWindow( x11Display(), win, imWidth, imHeight ); + + if ( imWidth != width() || imHeight != height() ) { + if ( myIsFullscreen ) { + centerImage(); + } + else { // window mode + // XMoveWindow( x11Display(), win, 0, 0 ); + resizeOptimal( imWidth, imHeight ); // also centers the image + } + } + else { // image size == widget size + xpos = 0; ypos = 0; + XMoveWindow( x11Display(), win, 0, 0 ); + } + + updateCursor(); + + QString caption = i18n( "Filename (Imagewidth x Imageheight)", + "%3 (%1 x %2)" ); + caption = caption.arg( m_kuim->originalWidth() ). + arg( m_kuim->originalHeight() ).arg( m_kuim->url().prettyURL() ); + setCaption( kapp->makeStdCaption( caption ) ); +} + + +void ImageWindow::centerImage() +{ + int w, h; + if ( myIsFullscreen ) + { + QRect desktopRect = KGlobalSettings::desktopGeometry( this ); + w = desktopRect.width(); + h = desktopRect.height(); + } + else + { + w = width(); + h = height(); + } + + xpos = w/2 - imageWidth()/2; + ypos = h/2 - imageHeight()/2; + + XMoveWindow( x11Display(), win, xpos, ypos ); + + // Modified by Evan for his Multi-Head (2 screens) + // This should center on the first head +// if ( myIsFullscreen && m_numHeads > 1 && ((m_numHeads % 2) == 0) ) +// xpos = ((width()/m_numHeads) / 2) - imageWidth()/2; +// else +// xpos = width()/2 - imageWidth()/2; + +// ypos = height()/2 - imageHeight()/2; +// XMoveWindow( x11Display(), win, xpos, ypos ); +} + + +void ImageWindow::scrollImage( int x, int y, bool restrict ) +{ + xpos += x; + ypos += y; + + int cwlocal = width(); + int chlocal = height(); + + int iw = imageWidth(); + int ih = imageHeight(); + + if ( myIsFullscreen || width() > desktopWidth() ) + cwlocal = desktopWidth(); + + if ( myIsFullscreen || height() > desktopHeight() ) + chlocal = desktopHeight(); + + if ( restrict ) { // don't allow scrolling in certain cases + if ( x != 0 ) { // restrict x-movement + if ( iw <= cwlocal ) + xpos -= x; // restore previous position + else if ( (xpos <= 0) && (xpos + iw <= cwlocal) ) + xpos = cwlocal - iw; + else if ( (xpos + iw >= cwlocal) && xpos >= 0 ) + xpos = 0; + } + + if ( y != 0 ) { // restrict y-movement + if ( ih <= chlocal ) + ypos -= y; + else if ( (ypos <= 0) && (ypos + ih <= chlocal) ) + ypos = chlocal - ih; + else if ( (ypos + ih >= chlocal) && ypos >= 0 ) + ypos = 0; + } + } + + XMoveWindow( x11Display(), win, xpos, ypos ); + XClearArea( x11Display(), win, xpos, ypos, iw, ih, false ); + showImage(); +} + + +// image loading performs: +// --------------------- +// loadImageInternal(); +// reset image mods +// load image from disk / get from cache +// loaded(); // apply modifications, scale +// render pixmap +// +// updateWidget(); +// XUnmapWindow(); +// XSetWindowBackgroundPixmap() +// resize window to fit image size, center image +// XClearWindow(); // repaint +// XMapWindow(), XSync(); +// +bool ImageWindow::showNextImage( const KURL& url ) +{ + KuickFile *file = FileCache::self()->getFile( url ); + switch ( file->waitForDownload( this ) ) { + case KuickFile::ERROR: + { + QString tmp = i18n("Unable to download the image from %1.").arg(url.prettyURL()); + emit sigImageError( file, tmp ); + return false; + } + case KuickFile::CANCELED: + return false; // just abort, no error message + default: + break; // go on... + } + + return showNextImage( file ); +} + +bool ImageWindow::showNextImage( KuickFile *file ) +{ + if ( !loadImage( file ) ) { + QString tmp = i18n("Unable to load the image %1.\n" + "Perhaps the file format is unsupported or " + "your Imlib is not installed properly.").arg(file->url().prettyURL()); + emit sigImageError( file, tmp ); + return false; + } + + else { + // updateWidget( true ); // already called from loadImage() + if ( !isVisible() ) + showWindow(); + + showImage(); + return true; + } +} + +void ImageWindow::reload() +{ + showNextImage( currentFile() ); +} + +void ImageWindow::pauseSlideShow() +{ + emit pauseSlideShowSignal(); +} + +void ImageWindow::addBrightness( int factor ) +{ + if ( factor == 0 ) + return; + + int oldValue = mod.brightness - ImlibOffset; + setBrightness( oldValue + (idata->brightnessFactor * (int) factor) ); +} + +void ImageWindow::addContrast( int factor ) +{ + if ( factor == 0 ) + return; + + int oldValue = mod.contrast - ImlibOffset; + setContrast( oldValue + (idata->contrastFactor * (int) factor) ); +} + +void ImageWindow::addGamma( int factor ) +{ + if ( factor == 0 ) + return; + + int oldValue = mod.gamma - ImlibOffset; + setGamma( oldValue + (idata->gammaFactor * (int) factor) ); +} + + +//////////// +//// +// slots for keyboard/popupmenu actions + + +void ImageWindow::scrollUp() +{ + scrollImage( 0, 20 * kdata->scrollSteps ); +} + +void ImageWindow::scrollDown() +{ + scrollImage( 0, - 20 * kdata->scrollSteps ); +} + +void ImageWindow::scrollLeft() +{ + scrollImage( 20 * kdata->scrollSteps, 0 ); +} + +void ImageWindow::scrollRight() +{ + scrollImage( - 20 * kdata->scrollSteps, 0 ); +} + +/// + +void ImageWindow::zoomIn() +{ + zoomImage( kdata->zoomSteps ); +} + +void ImageWindow::zoomOut() +{ + Q_ASSERT( kdata->zoomSteps != 0 ); + zoomImage( 1.0 / kdata->zoomSteps ); +} + +/// + +void ImageWindow::moreBrightness() +{ + addBrightness( kdata->brightnessSteps ); +} + +void ImageWindow::moreContrast() +{ + addContrast( kdata->contrastSteps ); +} + +void ImageWindow::moreGamma() +{ + addGamma( kdata->gammaSteps ); +} + + +void ImageWindow::lessBrightness() +{ + addBrightness( - kdata->brightnessSteps ); +} + +void ImageWindow::lessContrast() +{ + addContrast( - kdata->contrastSteps ); +} + +void ImageWindow::lessGamma() +{ + addGamma( - kdata->gammaSteps ); +} + +void ImageWindow::imageDelete() +{ + emit deleteImage(this); +} + +void ImageWindow::imageTrash() +{ + emit trashImage(this); +} + +/// + + + + +///////////// +//// +// event handlers + +void ImageWindow::wheelEvent( QWheelEvent *e ) +{ + e->accept(); + static const int WHEEL_DELTA = 120; + int delta = e->delta(); + + if ( delta == 0 ) + return; + + int steps = delta / WHEEL_DELTA; + emit requestImage( this, -steps ); +} + +void ImageWindow::keyPressEvent( QKeyEvent *e ) +{ + uint key = e->key(); + + if ( key == Key_Shift ) + updateCursor( ZoomCursor ); + + if ( key == Key_Escape || KStdAccel::close().contains( KKey( e ) ) ) + close( true ); + else if ( KStdAccel::save().contains( KKey( e ) ) ) + saveImage(); + + else { + e->ignore(); + return; + } + + e->accept(); +} + +void ImageWindow::keyReleaseEvent( QKeyEvent *e ) +{ + if ( e->state() & ShiftButton ) { // Shift-key released + updateCursor(); + if ( transWidget ) { + delete transWidget; + transWidget = 0L; + } + } + + e->accept(); +} + +void ImageWindow::mousePressEvent( QMouseEvent *e ) +{ + xmove = e->x(); // for moving the image with the mouse + ymove = e->y(); + + xzoom = xmove; // for zooming with the mouse + yzoom = ymove; + + xposPress = xmove; + yposPress = ymove; + + if ( e->button() == LeftButton ) { + if ( e->state() & ShiftButton ) + updateCursor( ZoomCursor ); + else + updateCursor( MoveCursor ); + } + + ImlibWidget::mousePressEvent( e ); +} + +void ImageWindow::contextMenuEvent( QContextMenuEvent *e ) +{ + e->accept(); + + if ( !viewerMenu ) + setPopupMenu(); + + viewerMenu->popup( e->globalPos() ); +} + +void ImageWindow::updateCursor( KuickCursor cursor ) +{ + switch ( cursor ) + { + case ZoomCursor: + setCursor( arrowCursor ); // need a magnify-cursor + break; + case MoveCursor: + setCursor( *s_handCursor ); + break; + case DefaultCursor: + default: + if ( isCursorHidden() ) + return; + + if ( imageWidth() > width() || imageHeight() > height() ) + setCursor( *s_handCursor ); + else + setCursor( arrowCursor ); + break; + } +} + +void ImageWindow::mouseMoveEvent( QMouseEvent *e ) +{ + if ( !(e->state() & LeftButton) ) { // only handle LeftButton actions + return; + } + + if ( e->state() & ShiftButton ) { + + if ( !transWidget ) { + transWidget = new QWidget( this ); + transWidget->setGeometry( 0, 0, width(), height() ); + transWidget->setBackgroundMode( NoBackground ); + } + + transWidget->hide(); + QPainter p( transWidget ); + // really required? + p.eraseRect( transWidget->rect() ); + transWidget->show(); + qApp->processOneEvent(); + + int width = e->x() - xposPress; + int height = e->y() - yposPress; + + if ( width < 0 ) { + width = abs( width ); + xzoom = e->x(); + } + + if ( height < 0 ) { + height = abs( height ); + yzoom = e->y(); + } + + QPen pen( Qt::white, 1, DashLine ); + p.setPen( pen ); // for drawing white dashed line + p.drawRect( xzoom, yzoom, width, height ); + p.setPen( DotLine ); // defaults to black dotted line pen + p.drawRect( xzoom, yzoom, width, height ); + p.flush(); + } + + else { // move the image + // scrolling with mouse + uint xtmp = e->x(); + uint ytmp = e->y(); + scrollImage( xtmp - xmove, ytmp - ymove ); + xmove = xtmp; + ymove = ytmp; + } +} + +void ImageWindow::mouseReleaseEvent( QMouseEvent *e ) +{ + updateCursor(); + + if ( transWidget ) { + // destroy the transparent widget, used for showing the rectangle (zoom) + delete transWidget; + transWidget = 0L; + } + + // only proceed if shift-Key is still pressed + if ( !(e->button() == LeftButton && e->state() & ShiftButton) ) + return; + + int neww, newh, topX, topY, botX, botY; + float factor, factorx, factory; + + // zoom into the selected area + uint x = e->x(); + uint y = e->y(); + + if ( xposPress == x || yposPress == y ) + return; + + if ( xposPress > x ) { + topX = x; + botX = xposPress; + } + else { + topX = xposPress; + botX = x; + } + + if ( yposPress > y ) { + topY = y; + botY = yposPress; + } + else { + topY = yposPress; + botY = y; + } + + neww = botX - topX; + newh = botY - topY; + + factorx = ((float) width() / (float) neww); + factory = ((float) height() / (float) newh); + + if ( factorx < factory ) // use the smaller factor + factor = factorx; + else factor = factory; + + uint w = 0; // shut up compiler! + uint h = 0; + w = (uint) ( factor * (float) imageWidth() ); + h = (uint) ( factor * (float) imageHeight() ); + + if ( !canZoomTo( w, h ) ) + return; + + int xtmp = - (int) (factor * abs(xpos - topX) ); + int ytmp = - (int) (factor * abs(ypos - topY) ); + + // if image has different ratio (width()/height()), center it + int xcenter = (width() - (int) (neww * factor)) / 2; + int ycenter = (height() - (int) (newh * factor)) / 2; + + xtmp += xcenter; + ytmp += ycenter; + + m_kuim->resize( w, h, idata->smoothScale ? KuickImage::SMOOTH : KuickImage::FAST ); + XResizeWindow( x11Display(), win, w, h ); + updateWidget( false ); + + xpos = xtmp; ypos = ytmp; + + XMoveWindow( x11Display(), win, xpos, ypos ); + scrollImage( 1, 1, true ); // unrestricted scrolling +} + + +void ImageWindow::focusInEvent( QFocusEvent *ev ) +{ + ImlibWidget::focusInEvent( ev ); + emit sigFocusWindow( this ); +} + + +void ImageWindow::resizeEvent( QResizeEvent *e ) +{ + ImlibWidget::resizeEvent( e ); + + centerImage(); + updateCursor(); +} + + +void ImageWindow::dragEnterEvent( QDragEnterEvent *e ) +{ + // if ( e->provides( "image/*" ) ) // can't do this right now with Imlib + if ( e->provides( "text/uri-list" ) ) + e->accept(); + else + e->ignore(); +} + + +void ImageWindow::dropEvent( QDropEvent *e ) +{ + // FIXME - only preliminary drop-support for now + KURL::List list; + if ( KURLDrag::decode( e, list ) && !list.isEmpty()) { + QString tmpFile; + const KURL &url = list.first(); + if (KIO::NetAccess::download( url, tmpFile, this ) ) + { + loadImage( tmpFile ); + KIO::NetAccess::removeTempFile( tmpFile ); + } + updateWidget(); + e->accept(); + } + else + e->ignore(); +} + + +//////////////////// +///////// +// misc stuff + +void ImageWindow::setPopupMenu() +{ + viewerMenu = new QPopupMenu( this ); + + m_actions->action("next_image")->plug( viewerMenu ); + m_actions->action("previous_image")->plug( viewerMenu ); + viewerMenu->insertSeparator(); + + brightnessMenu = new QPopupMenu( viewerMenu ); + m_actions->action("more_brightness")->plug(brightnessMenu); + m_actions->action("less_brightness")->plug(brightnessMenu); + + contrastMenu = new QPopupMenu( viewerMenu ); + m_actions->action("more_contrast")->plug(contrastMenu); + m_actions->action("less_contrast")->plug(contrastMenu); + + gammaMenu = new QPopupMenu( viewerMenu ); + m_actions->action("more_gamma")->plug(gammaMenu); + m_actions->action("less_gamma")->plug(gammaMenu); + + m_actions->action("zoom_in")->plug( viewerMenu ); + m_actions->action("zoom_out")->plug( viewerMenu ); + m_actions->action("original_size")->plug( viewerMenu ); + m_actions->action("maximize")->plug( viewerMenu ); + + viewerMenu->insertSeparator(); + m_actions->action("rotate90")->plug( viewerMenu ); + m_actions->action("rotate180")->plug( viewerMenu ); + m_actions->action("rotate270")->plug( viewerMenu ); + + viewerMenu->insertSeparator(); + m_actions->action("flip_vertically")->plug( viewerMenu ); + m_actions->action("flip_horicontally")->plug( viewerMenu ); + viewerMenu->insertSeparator(); + viewerMenu->insertItem( i18n("Brightness"), brightnessMenu ); + viewerMenu->insertItem( i18n("Contrast"), contrastMenu ); + viewerMenu->insertItem( i18n("Gamma"), gammaMenu ); + viewerMenu->insertSeparator(); + + m_actions->action("delete_image")->plug( viewerMenu ); + m_actions->action("print_image")->plug( viewerMenu ); + m_actions->action("save_image_as")->plug( viewerMenu ); + m_actions->action("properties")->plug( viewerMenu ); + + viewerMenu->insertSeparator(); + m_actions->action("close_image")->plug( viewerMenu ); +} + +void ImageWindow::printImage() +{ + if ( !m_kuim ) + return; + + if ( !Printing::printImage( *this, this ) ) + { + KMessageBox::sorry( this, i18n("Unable to print the image."), + i18n("Printing Failed") ); + } +} + +void ImageWindow::saveImage() +{ + if ( !m_kuim ) + return; + + KuickData tmp; + QCheckBox *keepSize = new QCheckBox( i18n("Keep original image size"), 0L); + keepSize->setChecked( true ); + KFileDialog dlg( m_saveDirectory, tmp.fileFilter, this, "filedialog", true +#if KDE_VERSION >= 310 + ,keepSize +#endif + ); + + QString selection = m_saveDirectory.isEmpty() ? + m_kuim->url().url() : + m_kuim->url().fileName(); + dlg.setOperationMode( KFileDialog::Saving ); + dlg.setMode( KFile::File ); + dlg.setSelection( selection ); + dlg.setCaption( i18n("Save As") ); + if ( dlg.exec() == QDialog::Accepted ) + { + KURL url = dlg.selectedURL(); + if ( url.isValid() ) + { + if ( !saveImage( url, keepSize->isChecked() ) ) + { + QString tmp = i18n("Couldn't save the file.\n" + "Perhaps the disk is full, or you don't " + "have write permission to the file."); + KMessageBox::sorry( this, tmp, i18n("File Saving Failed")); + } + else + { + if ( url.equals( m_kuim->url() )) { + Imlib_apply_modifiers_to_rgb( id, m_kuim->imlibImage() ); + } + } + } + } + + QString lastDir = dlg.baseURL().path(+1); + if ( lastDir != m_saveDirectory ) + m_saveDirectory = lastDir; + +#if KDE_VERSION < 310 + delete keepSize; +#endif +} + +bool ImageWindow::saveImage( const KURL& dest, bool keepOriginalSize ) +{ + int w = keepOriginalSize ? m_kuim->originalWidth() : m_kuim->width(); + int h = keepOriginalSize ? m_kuim->originalHeight() : m_kuim->height(); + if ( m_kuim->absRotation() == ROT_90 || m_kuim->absRotation() == ROT_270 ) + qSwap( w, h ); + + ImlibImage *saveIm = Imlib_clone_scaled_image( id, m_kuim->imlibImage(), + w, h ); + bool success = false; + + QString saveFile; + if ( dest.isLocalFile() ) + saveFile = dest.path(); + else + { + QString extension = QFileInfo( dest.fileName() ).extension(); + if ( !extension.isEmpty() ) + extension.prepend( '.' ); + + KTempFile tmpFile( QString::null, extension ); + if ( tmpFile.status() != 0 ) + return false; + tmpFile.close(); + if ( tmpFile.status() != 0 ) + return false; + saveFile = tmpFile.name(); + } + + if ( saveIm ) + { + Imlib_apply_modifiers_to_rgb( id, saveIm ); + success = Imlib_save_image( id, saveIm, + QFile::encodeName( saveFile ).data(), + NULL ); + if ( success && !dest.isLocalFile() ) + { + if ( isFullscreen() ) + toggleFullscreen(); // otherwise upload window would block us invisibly + success = KIO::NetAccess::upload( saveFile, dest, const_cast<ImageWindow*>( this ) ); + } + + Imlib_kill_image( id, saveIm ); + } + + return success; +} + +void ImageWindow::toggleFullscreen() +{ + setFullscreen( !myIsFullscreen ); + showWindow(); +} + +void ImageWindow::loaded( KuickImage *kuim ) +{ + if ( !kdata->isModsEnabled ) { + // ### BUG: should be "restorePreviousSize" + kuim->restoreOriginalSize(); + } + else + { + autoRotate( kuim ); + autoScale( kuim ); + } +} + +// upscale/downscale depending on configuration +void ImageWindow::autoScale( KuickImage *kuim ) +{ + int newW = kuim->originalWidth(); + int newH = kuim->originalHeight(); + + QSize s = maxImageSize(); + int mw = s.width(); + int mh = s.height(); + + if ( kuim->absRotation() == ROT_90 || kuim->absRotation() == ROT_270 ) + qSwap( newW, newH ); + + bool doIt = false; + + if ( kdata->upScale ) + { + if ( (newW < mw) && (newH < mh) ) + { + doIt = true; + + float ratio1, ratio2; + int maxUpScale = kdata->maxUpScale; + + ratio1 = (float) mw / (float) newW; + ratio2 = (float) mh / (float) newH; + ratio1 = (ratio1 < ratio2) ? ratio1 : ratio2; + if ( maxUpScale > 0 ) + ratio1 = (ratio1 < maxUpScale) ? ratio1 : maxUpScale; + newH = (int) ((float) newH * ratio1); + newW = (int) ((float) newW * ratio1); + } + } + + if ( kdata->downScale ) + { + // eventually set width and height to the best/max possible screen size + if ( (newW > mw) || (newH > mh) ) + { + doIt = true; + + if ( newW > mw ) + { + float ratio = (float) newW / (float) newH; + newW = mw; + newH = (int) ((float) newW / ratio); + } + + // the previously calculated "h" might be larger than screen + if ( newH > mh ) { + float ratio = (float) newW / (float) newH; + newH = mh; + newW = (int) ((float) newH * ratio); + } + } + } + + if ( doIt ) + kuim->resize( newW, newH, idata->smoothScale ? KuickImage::SMOOTH : KuickImage::FAST ); +} + +// only called when kdata->isModsEnabled is true +bool ImageWindow::autoRotate( KuickImage *kuim ) +{ + if ( kdata->autoRotation && ImlibWidget::autoRotate( kuim ) ) + return true; + + else // rotation by metadata not available or not configured + { + // only apply default mods to newly loaded images + + // ### actually we should have a dirty flag ("neverManuallyFlipped") + if ( kuim->flipMode() == FlipNone ) + { + int flipMode = 0; + if ( kdata->flipVertically ) + flipMode |= FlipVertical; + if ( kdata->flipHorizontally ) + flipMode |= FlipHorizontal; + + kuim->flipAbs( flipMode ); + } + + if ( kuim->absRotation() == ROT_0 ) + kuim->rotateAbs( kdata->rotation ); + } + + return true; +} + +int ImageWindow::desktopWidth( bool totalScreen ) const +{ + if ( myIsFullscreen || totalScreen ) + { + return KGlobalSettings::desktopGeometry(topLevelWidget()).width(); + } else + return Kuick::workArea().width(); +} + + +int ImageWindow::desktopHeight( bool totalScreen ) const +{ + if ( myIsFullscreen || totalScreen ) { + return KGlobalSettings::desktopGeometry(topLevelWidget()).height(); + } else { + return Kuick::workArea().height(); + } +} + +QSize ImageWindow::maxImageSize() const +{ + if ( myIsFullscreen ) { + return KGlobalSettings::desktopGeometry(topLevelWidget()).size(); + } + else { + return Kuick::workArea().size() - Kuick::frameSize( winId() ); + } +} + +void ImageWindow::resizeOptimal( int w, int h ) +{ + QSize s = maxImageSize(); + int mw = s.width(); + int mh = s.height(); + int neww = (w >= mw) ? mw : w; + int newh = (h >= mh) ? mh : h; + + if ( neww == width() && newh == height() ) + centerImage(); + else + resize( neww, newh ); // also centers the image +} + +void ImageWindow::maximize() +{ + if ( !m_kuim ) + return; + + bool oldUpscale = kdata->upScale; + bool oldDownscale = kdata->downScale; + + kdata->upScale = true; + kdata->downScale = true; + + autoScale( m_kuim ); + updateWidget( true ); + + if ( !myIsFullscreen ) + resizeOptimal( imageWidth(), imageHeight() ); + + kdata->upScale = oldUpscale; + kdata->downScale = oldDownscale; +} + +bool ImageWindow::canZoomTo( int newWidth, int newHeight ) +{ + if ( !ImlibWidget::canZoomTo( newWidth, newHeight ) ) + return false; + + QSize desktopSize = KGlobalSettings::desktopGeometry(topLevelWidget()).size(); + + int desktopArea = desktopSize.width() * desktopSize.height(); + int imageArea = newWidth * newHeight; + + if ( imageArea > desktopArea * kdata->maxZoomFactor ) + { + return KMessageBox::warningContinueCancel( + this, + i18n("You are about to view a very large image (%1 x %2 pixels), which can be very resource-consuming and even make your computer hang.\nDo you want to continue?") + .arg( newWidth ).arg( newHeight ), + QString::null, + KStdGuiItem::cont(), + "ImageWindow_confirm_very_large_window" + ) == KMessageBox::Continue; + } + + return true; +} + +void ImageWindow::rotated( KuickImage *kuim, int rotation ) +{ + if ( !m_kuim ) + return; + + ImlibWidget::rotated( kuim, rotation ); + + if ( rotation == ROT_90 || rotation == ROT_270 ) + autoScale( kuim ); // ### BUG: only autoScale when configured! +} + +void ImageWindow::slotProperties() +{ + (void) new KPropertiesDialog( currentFile()->url(), this, "props dialog", true ); +} + +void ImageWindow::setBusyCursor() +{ + // avoid busy cursor in fullscreen mode + if ( !isFullscreen() ) + ImlibWidget::setBusyCursor(); +} + +void ImageWindow::restoreCursor() +{ + // avoid busy cursor in fullscreen mode + if ( !isFullscreen() ) + ImlibWidget::restoreCursor(); +} + +bool ImageWindow::isCursorHidden() const +{ + return cursor().shape() == Qt::BlankCursor; +} + +#include "imagewindow.moc" diff --git a/kuickshow/src/imagewindow.h b/kuickshow/src/imagewindow.h new file mode 100644 index 0000000..4a823a0 --- /dev/null +++ b/kuickshow/src/imagewindow.h @@ -0,0 +1,176 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef IMAGEWINDOW_H +#define IMAGEWINDOW_H + +#include <qevent.h> + +#include <kaction.h> +#include <kurl.h> + +#include "imlibwidget.h" + +class QCursor; +class QPopupMenu; +class QRect; +class QString; +class QTimer; +class QWidget; + +class KuickFile; + +class ImageWindow : public ImlibWidget +{ + Q_OBJECT + +public: + ImageWindow( ImData *_idata, ImlibData *id, QWidget *parent=0, + const char *name=0 ); + ImageWindow( ImData *_idata=0, QWidget *parent=0, const char *name=0 ); + + bool showNextImage( KuickFile * file ); + bool showNextImage( const KURL& url ); + void scrollImage( int, int, bool restrict=true ); + void setFullscreen( bool ); + bool isFullscreen() const { return myIsFullscreen; } + + void addBrightness( int ); + void addContrast( int ); + void addGamma( int ); + + void updateActions(); + + KActionCollection * actionCollection() const { return m_actions; } + + /** + * Resizes image to @p w, @p h, but takes into account the workarea, so + * it won't ever get a bigger size than the workarea. + */ + void resizeOptimal( int w, int h ); + void autoScale( KuickImage *kuim ); + virtual bool autoRotate( KuickImage *kuim ); + + bool saveImage( const KURL& dest, bool keepOriginalSize ); + +public slots: + void zoomIn(); + void zoomOut(); + void moreBrightness(); + void lessBrightness(); + void moreContrast(); + void lessContrast(); + void moreGamma(); + void lessGamma(); + void scrollUp(); + void scrollDown(); + void scrollLeft(); + void scrollRight(); + void printImage(); + void toggleFullscreen(); + void maximize(); + void imageDelete(); + void imageTrash(); + +signals: + void sigFocusWindow( ImageWindow * ); + // go advance images back/forth + void requestImage( ImageWindow *, int advance ); + void deleteImage(ImageWindow *viewer); + void trashImage(ImageWindow *viewer); + +protected: + ~ImageWindow(); // deletes itself, just call close( true ); + + void init(); + void centerImage(); + void addAlternativeShortcut( KAction *action, int key ); + virtual void updateGeometry( int imWidth, int imHeight ); + virtual void loaded( KuickImage * ); + virtual bool canZoomTo( int newWidth, int newHeight ); + virtual void rotated( KuickImage *kuim, int rotation ); + + virtual void wheelEvent( QWheelEvent * ); + virtual void keyPressEvent( QKeyEvent * ); + virtual void keyReleaseEvent( QKeyEvent * ); + virtual void mousePressEvent( QMouseEvent * ); + virtual void mouseReleaseEvent( QMouseEvent * ); + virtual void mouseMoveEvent( QMouseEvent * ); + virtual void focusInEvent( QFocusEvent * ); + virtual void resizeEvent( QResizeEvent * ); + virtual void dragEnterEvent( QDragEnterEvent * ); + virtual void dropEvent( QDropEvent * ); + virtual void contextMenuEvent( QContextMenuEvent * ); + + void showWindow(); + enum KuickCursor { DefaultCursor = 0, ZoomCursor, MoveCursor }; + void updateCursor( KuickCursor cursor = DefaultCursor ); + + // popupmenu entries + uint itemViewerZoomMax, itemViewerZoomOrig, itemViewerZoomIn; + uint itemViewerZoomOut, itemViewerFlipH, itemViewerProps; + uint itemRotate90, itemRotate180, itemRotate270; + uint itemViewerFlipV, itemViewerPrint; + uint itemViewerSave, itemViewerClose; + uint itemBrightnessPlus, itemBrightnessMinus; + uint itemContrastPlus, itemContrastMinus; + uint itemGammaPlus, itemGammaMinus; + + + uint xmove, ymove; // used for scrolling the image with the mouse + int xpos, ypos; // top left corner of the image + int xzoom, yzoom; // used for zooming the image with the mouse + uint xposPress, yposPress; + + + QPopupMenu *viewerMenu, *gammaMenu, *brightnessMenu, *contrastMenu; + QWidget *transWidget; + + +protected slots: + void saveImage(); + void slotRequestNext() { emit requestImage( this, +1 ); } + void slotRequestPrevious() { emit requestImage( this, -1 ); } + void reload(); + void slotProperties(); + void pauseSlideShow(); + virtual void setBusyCursor(); + virtual void restoreCursor(); + +signals: + void pauseSlideShowSignal(); + +private: + int desktopWidth( bool totalScreen = false ) const; + int desktopHeight( bool totalScreen = false ) const; + QSize maxImageSize() const; + void setupActions(); + void setPopupMenu(); + bool isCursorHidden() const; + + bool myIsFullscreen; + int m_numHeads; + QString m_saveDirectory; + + KActionCollection *m_actions; + + static QCursor * s_handCursor; +}; + + +#endif // IMAGEWINDOW_H diff --git a/kuickshow/src/imdata.cpp b/kuickshow/src/imdata.cpp new file mode 100644 index 0000000..a2e8928 --- /dev/null +++ b/kuickshow/src/imdata.cpp @@ -0,0 +1,92 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2001 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <stdlib.h> + +#include <kconfig.h> + +#include "imdata.h" + + +ImData::ImData() +{ + ownPalette = true; + fastRemap = true; + fastRender = true; + dither16bit = false; + dither8bit = true; + smoothScale = false; + maxCache = 10240; + + gamma = 0; + brightness = 0; + contrast = 0; + + gammaFactor = 10; + brightnessFactor = 10; + contrastFactor = 10; +} + + +void ImData::load( KConfig *kc ) +{ + ImData def; + + kc->setGroup( "ImlibConfiguration" ); + + ownPalette = kc->readBoolEntry( "UseOwnPalette", def.ownPalette ); + fastRemap = kc->readBoolEntry( "FastRemapping", def.fastRemap ); + fastRender = kc->readBoolEntry( "FastRendering", def.fastRender ); + dither16bit = kc->readBoolEntry( "Dither16Bit", def.dither16bit ); + dither8bit = kc->readBoolEntry( "Dither8Bit", def.dither8bit ); + smoothScale = kc->readBoolEntry( "SmoothScaling", def.smoothScale ); + + maxCache = kc->readNumEntry( "MaxCacheSize", 10240 ); + + gamma = kc->readNumEntry( "GammaDefault", 0 ); + brightness = kc->readNumEntry( "BrightnessDefault", 0 ); + contrast = kc->readNumEntry( "ContrastDefault", 0 ); + + gammaFactor = abs( kc->readNumEntry( "GammaFactor", 10 ) ); + brightnessFactor = abs( kc->readNumEntry( "BrightnessFactor", 10 ) ); + contrastFactor = abs( kc->readNumEntry( "ContrastFactor", 10 ) ); +} + + +void ImData::save( KConfig *kc ) +{ + kc->setGroup( "ImlibConfiguration" ); + + kc->writeEntry( "UseOwnPalette", ownPalette ); + kc->writeEntry( "FastRemapping", fastRemap ); + kc->writeEntry( "FastRendering", fastRender ); + kc->writeEntry( "Dither16Bit", dither16bit ); + kc->writeEntry( "Dither8Bit", dither8bit ); + kc->writeEntry( "MaxCacheSize", maxCache ); + kc->writeEntry( "SmoothScaling", smoothScale ); + + kc->writeEntry( "GammaDefault", gamma ); + kc->writeEntry( "BrightnessDefault", brightness ); + kc->writeEntry( "ContrastDefault", contrast ); + + kc->writeEntry( "GammaFactor", gammaFactor ); + kc->writeEntry( "BrightnessFactor", brightnessFactor ); + kc->writeEntry( "ContrastFactor", contrastFactor ); + + kc->sync(); +} diff --git a/kuickshow/src/imdata.h b/kuickshow/src/imdata.h new file mode 100644 index 0000000..c6dc6a5 --- /dev/null +++ b/kuickshow/src/imdata.h @@ -0,0 +1,57 @@ +/* This file is part of the KDE project + Copyright (C) 1998,1999,2000,2001 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef IMBLIBCONFIG_H +#define IMBLIBCONFIG_H + +class KConfig; +class ImData +{ +public: + ImData(); + ~ImData() {}; + + void load( KConfig *kc ); + void save( KConfig *kc ); + + // new stuff.......... + + int gamma; + int brightness; + int contrast; + + // ----------------------- + + bool ownPalette :1; + bool fastRemap :1; + bool fastRender :1; + bool dither16bit :1; + bool dither8bit :1; + bool smoothScale :1; + + + uint gammaFactor; + uint brightnessFactor; + uint contrastFactor; + + uint maxCache; + +}; + + +#endif diff --git a/kuickshow/src/imlibwidget.cpp b/kuickshow/src/imlibwidget.cpp new file mode 100644 index 0000000..5b5cb84 --- /dev/null +++ b/kuickshow/src/imlibwidget.cpp @@ -0,0 +1,715 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include "kuickdata.h" + +#include <sys/time.h> +#include <unistd.h> + +#include <stdlib.h> +#include <assert.h> + +#include <qcolor.h> +#include <qfile.h> +#include <qglobal.h> +#include <qimage.h> +#include <qobject.h> +#include <qpalette.h> + +#include <kcursor.h> +#include <kdebug.h> +#include <kfilemetainfo.h> +#include <kimageio.h> + +#include "filecache.h" +#include "kuickfile.h" +#include "kuickimage.h" +#include "imlibwidget.h" + +const int ImlibWidget::ImlibOffset = 256; + +ImlibWidget::ImlibWidget( ImData *_idata, QWidget *parent, const char *name ) : + QWidget( parent, name, WDestructiveClose ) +{ + idata = _idata; + deleteImData = false; + deleteImlibData = true; + + if ( !idata ) { // if no imlib configuration was given, create one ourself + idata = new ImData; + deleteImData = true; + } + + ImlibInitParams par; + + // PARAMS_PALETTEOVERRIDE taken out because of segfault in imlib :o( + par.flags = ( PARAMS_REMAP | PARAMS_VISUALID | + PARAMS_FASTRENDER | PARAMS_HIQUALITY | PARAMS_DITHER | + PARAMS_IMAGECACHESIZE | PARAMS_PIXMAPCACHESIZE ); + + Visual* defaultvis = DefaultVisual(x11Display(), x11Screen()); + + par.paletteoverride = idata->ownPalette ? 1 : 0; + par.remap = idata->fastRemap ? 1 : 0; + par.fastrender = idata->fastRender ? 1 : 0; + par.hiquality = idata->dither16bit ? 1 : 0; + par.dither = idata->dither8bit ? 1 : 0; + par.visualid = defaultvis->visualid; + uint maxcache = idata->maxCache; + + // 0 == no cache + par.imagecachesize = maxcache * 1024; + par.pixmapcachesize = maxcache * 1024; + + id = Imlib_init_with_params( x11Display(), &par ); + + init(); +} + + +ImlibWidget::ImlibWidget( ImData *_idata, ImlibData *_id, QWidget *parent, + const char *name ) + : QWidget( parent, name, WDestructiveClose ) +{ + id = _id; + idata = _idata; + deleteImData = false; + deleteImlibData = false; + + if ( !idata ) { + idata = new ImData; + deleteImData = true; + } + + init(); +} + + +void ImlibWidget::init() +{ + int w = 1; // > 0 for XCreateWindow + int h = 1; + myBackgroundColor = Qt::black; + m_kuim = 0L; + m_kuickFile = 0L; + + if ( !id ) + qFatal("ImlibWidget: Imlib not initialized, aborting."); + + setAutoRender( true ); + + setPalette( QPalette( myBackgroundColor )); + setBackgroundMode( PaletteBackground ); + + imageCache = new ImageCache( id, 4 ); // cache 4 images (FIXME?) + connect( imageCache, SIGNAL( sigBusy() ), SLOT( setBusyCursor() )); + connect( imageCache, SIGNAL( sigIdle() ), SLOT( restoreCursor() )); + + win = XCreateSimpleWindow(x11Display(), winId(), 0,0,w,h,0,0,0); +} + +ImlibWidget::~ImlibWidget() +{ + delete imageCache; + if ( deleteImlibData && id ) free ( id ); + if ( win ) XDestroyWindow( x11Display(), win ); + if ( deleteImData ) delete idata; +} + +KURL ImlibWidget::url() const +{ + if ( m_kuickFile ) + return m_kuickFile->url(); + + return KURL(); +} + +KuickFile * ImlibWidget::currentFile() const +{ + return m_kuickFile; +} + +// tries to load "file" and returns the according KuickImage * +// or 0L if unsuccessful +// Note that the given file MUST already be downloaded prior to calling this function +KuickImage * ImlibWidget::loadImageInternal( KuickFile * file ) +{ + assert( file->isAvailable() ); + + // apply default image modifications + mod.brightness = idata->brightness + ImlibOffset; + mod.contrast = idata->contrast + ImlibOffset; + mod.gamma = idata->gamma + ImlibOffset; + + KuickImage *kuim = imageCache->getKuimage( file, mod ); + if ( !kuim ) {// couldn't load file, maybe corrupt or wrong format + kdWarning() << "ImlibWidget: can't load image " << file->url().prettyURL() << endl; + return 0L; + } + + loaded( kuim ); // maybe upscale/downscale/rotate in subclasses + + return kuim; +} + +// overridden in subclass +void ImlibWidget::loaded( KuickImage * ) +{ +} + +bool ImlibWidget::loadImage( const KURL& url ) +{ + return loadImage( FileCache::self()->getFile( url )); +} + +bool ImlibWidget::loadImage( KuickFile * file ) +{ + if ( file->waitForDownload( this ) != KuickFile::OK) + return false; + + KuickImage *kuim = loadImageInternal( file ); + // FIXME - check everywhere if we have a kuim or not! + + if ( kuim ) { + m_kuim = kuim; + autoUpdate( true ); // -> updateWidget() -> updateGeometry() + m_kuickFile = file; + return true; + } + + return false; +} + + +bool ImlibWidget::cacheImage( const KURL& url ) +{ +// qDebug("cache image: %s", url.url().latin1()); + KuickFile *file = FileCache::self()->getFile( url ); + if ( file->isAvailable() ) + return cacheImage( file ); + else { + if ( !file->download() ) { + return false; + } + connect( file, SIGNAL( downloaded( KuickFile * )), SLOT( cacheImage( KuickFile * )) ); + return true; // optimistic + } +} + +bool ImlibWidget::cacheImage( KuickFile * file ) +{ +// qDebug("cache image: %s", file->url().url().latin1()); + KuickImage *kuim = loadImageInternal( file ); + if ( kuim ) { + kuim->renderPixmap(); + return true; + } + return false; +} + + +void ImlibWidget::showImage() +{ + XMapWindow( x11Display(), win ); + XSync( x11Display(), False ); +} + + +// -256..256 +void ImlibWidget::setBrightness( int factor ) +{ + mod.brightness = factor + ImlibOffset; + setImageModifier(); + + autoUpdate(); +} + + +// -256..256 +void ImlibWidget::setContrast( int factor ) +{ + mod.contrast = factor + ImlibOffset; + setImageModifier(); + + autoUpdate(); +} + + +// -256..256 +void ImlibWidget::setGamma( int factor ) +{ + mod.gamma = factor + ImlibOffset; + setImageModifier(); + + autoUpdate(); +} + + +Rotation ImlibWidget::rotation() const +{ + return m_kuim ? m_kuim->absRotation() : ROT_0; +} + +FlipMode ImlibWidget::flipMode() const +{ + return m_kuim ? m_kuim->flipMode() : FlipNone; +} + +void ImlibWidget::zoomImage( float factor ) +{ + if ( factor == 1 || factor == 0 || !m_kuim ) + return; + + int newWidth = (int) (factor * (float) m_kuim->width()); + int newHeight = (int) (factor * (float) m_kuim->height()); + + if ( canZoomTo( newWidth, newHeight ) ) + { + m_kuim->resize( newWidth, newHeight, idata->smoothScale ? KuickImage::SMOOTH : KuickImage::FAST ); + autoUpdate( true ); + } +} + +bool ImlibWidget::canZoomTo( int newWidth, int newHeight ) +{ + if ( newWidth <= 2 || newHeight <= 2 ) // minimum size for an image is 2x2 pixels + return false; + + return true; +} + + +void ImlibWidget::showImageOriginalSize() +{ + if ( !m_kuim ) + return; + + m_kuim->restoreOriginalSize(); + autoUpdate( true ); + + showImage(); +} + +bool ImlibWidget::autoRotate( KuickImage *kuim ) +{ + KFileMetaInfo metadatas( kuim->file().localFile() ); + if ( !metadatas.isValid() ) + return false; + + KFileMetaInfoItem metaitem = metadatas.item("Orientation"); + if ( !metaitem.isValid() +#if QT_VERSION >= 0x030100 + || metaitem.value().isNull() +#endif + ) + return false; + + + switch ( metaitem.value().toInt() ) + { + // Orientation: + // 1: normal + // 2: flipped horizontally + // 3: ROT 180 + // 4: flipped vertically + // 5: ROT 90 -> flip horizontally + // 6: ROT 90 + // 7: ROT 90 -> flip vertically + // 8: ROT 270 + + case 1: + default: + kuim->rotateAbs( ROT_0 ); + break; + case 2: + kuim->flipAbs( FlipHorizontal ); + break; + case 3: + kuim->rotateAbs( ROT_180 ); + break; + case 4: + kuim->flipAbs( FlipVertical ); + break; + case 5: + kuim->rotateAbs( ROT_90 ); + kuim->flipAbs( FlipHorizontal ); + break; + case 6: + kuim->rotateAbs( ROT_90 ); + break; + case 7: + kuim->rotateAbs( ROT_90 ); + kuim->flipAbs( FlipVertical ); + break; + case 8: + kuim->rotateAbs( ROT_270 ); + break; + } + + return true; +} + + +void ImlibWidget::setRotation( Rotation rot ) +{ + if ( m_kuim ) + { + if ( m_kuim->rotateAbs( rot ) ) + autoUpdate( true ); + } +} + + +// slots connected to Accels and popupmenu +void ImlibWidget::rotate90() +{ + if ( !m_kuim ) + return; + + m_kuim->rotate( ROT_90 ); + rotated( m_kuim, ROT_90 ); + autoUpdate( true ); +} + +void ImlibWidget::rotate180() +{ + if ( !m_kuim ) + return; + + m_kuim->rotate( ROT_180 ); + rotated( m_kuim, ROT_180 ); + autoUpdate(); +} + +void ImlibWidget::rotate270() +{ + if ( !m_kuim ) + return; + + m_kuim->rotate( ROT_270 ); + rotated( m_kuim, ROT_270 ); + autoUpdate( true ); +} + + +// should this go into a subclass? +void ImlibWidget::flipHoriz() +{ + if ( !m_kuim ) + return; + + m_kuim->flip( FlipHorizontal ); + autoUpdate(); +} + +void ImlibWidget::flipVert() +{ + if ( !m_kuim ) + return; + + m_kuim->flip( FlipVertical ); + autoUpdate(); +} +// end slots + + +void ImlibWidget::setFlipMode( int mode ) +{ + if ( !m_kuim ) + return; + + if ( m_kuim->flipAbs( mode ) ) + autoUpdate(); +} + + +void ImlibWidget::updateWidget( bool geometryUpdate ) +{ + if ( !m_kuim ) + return; + +// if ( geometryUpdate ) +// XUnmapWindow( x11Display(), win );// remove the old image -> no flicker + + XSetWindowBackgroundPixmap( x11Display(), win, m_kuim->pixmap() ); + + if ( geometryUpdate ) + updateGeometry( m_kuim->width(), m_kuim->height() ); + + XClearWindow( x11Display(), win ); + + showImage(); +} + + +// here we just use the size of m_kuim, may be overridden in subclass +void ImlibWidget::updateGeometry( int w, int h ) +{ + XMoveWindow( x11Display(), win, 0, 0 ); // center? + XResizeWindow( x11Display(), win, w, h ); + resize( w, h ); +} + + +void ImlibWidget::closeEvent( QCloseEvent *e ) +{ + e->accept(); + QWidget::closeEvent( e ); +} + + +void ImlibWidget::setBackgroundColor( const QColor& color ) +{ + myBackgroundColor = color; + setPalette( QPalette( myBackgroundColor )); + repaint( false); // FIXME - false? necessary at all? +} + +const QColor& ImlibWidget::backgroundColor() const +{ + return myBackgroundColor; +} + + +void ImlibWidget::setImageModifier() +{ + if ( !m_kuim ) + return; + + Imlib_set_image_modifier( id, m_kuim->imlibImage(), &mod ); + m_kuim->setDirty( true ); +} + +int ImlibWidget::imageWidth() const +{ + return m_kuim ? m_kuim->width() : 0; +} + +int ImlibWidget::imageHeight() const +{ + return m_kuim ? m_kuim->height() : 0; +} + +void ImlibWidget::setBusyCursor() +{ + if ( ownCursor() ) + m_oldCursor = cursor(); + else + m_oldCursor = QCursor(); + + setCursor( KCursor::waitCursor() ); +} + +void ImlibWidget::restoreCursor() +{ + if ( cursor().shape() == KCursor::waitCursor().shape() ) // only if nobody changed the cursor in the meantime! + setCursor( m_oldCursor ); +} + +// Reparenting a widget in Qt in fact means destroying the old X window of the widget +// and creating a new one. And since the X window used for the Imlib image is a child +// of this widget's X window, destroying this widget's X window would mean also +// destroying the Imlib image X window. Therefore it needs to be temporarily reparented +// away and reparented back to the new X window. +// Reparenting may happen e.g. when doing the old-style (non-NETWM) fullscreen changes. +void ImlibWidget::reparent( QWidget* parent, WFlags f, const QPoint& p, bool showIt ) +{ + XWindowAttributes attr; + XGetWindowAttributes( x11Display(), win, &attr ); + XUnmapWindow( x11Display(), win ); + XReparentWindow( x11Display(), win, attr.root, 0, 0 ); + QWidget::reparent( parent, f, p, showIt ); + XReparentWindow( x11Display(), win, winId(), attr.x, attr.y ); + if( attr.map_state != IsUnmapped ) + XMapWindow( x11Display(), win ); +} + +void ImlibWidget::rotated( KuickImage *, int ) +{ +} + +//---------- + + +// uhh ugly, we have two lists to map from filename to KuickImage :-/ +ImageCache::ImageCache( ImlibData *id, int maxImages ) +{ + myId = id; + idleCount = 0; + myMaxImages = maxImages; + kuickList.setAutoDelete( true ); + fileList.clear(); + kuickList.clear(); +} + + +ImageCache::~ImageCache() +{ + kuickList.clear(); + fileList.clear(); +} + + +void ImageCache::setMaxImages( int maxImages ) +{ + myMaxImages = maxImages; + int count = kuickList.count(); + while ( count > myMaxImages ) { + kuickList.removeLast(); + fileList.remove( fileList.fromLast() ); + count--; + } +} + +void ImageCache::slotBusy() +{ + if ( idleCount == 0 ) + emit sigBusy(); + + idleCount++; +} + +void ImageCache::slotIdle() +{ + idleCount--; + + if ( idleCount == 0 ) + emit sigIdle(); +} + + +KuickImage * ImageCache::getKuimage( KuickFile * file, + ImlibColorModifier mod ) +{ + if ( !file ) + return 0L; + + assert( file->isAvailable() ); // debug build + if ( file->waitForDownload( 0L ) != KuickFile::OK ) // and for users + return 0L; + + KuickImage *kuim = 0L; + int index = fileList.findIndex( file ); + if ( index != -1 ) { + if ( index == 0 ) + kuim = kuickList.at( 0 ); + + // need to reorder the lists, otherwise we might delete the current + // image when a new one is cached and the current one is the last! + else { + kuim = kuickList.take( index ); + kuickList.insert( 0, kuim ); + fileList.remove( file ); + fileList.prepend( file ); + } + + return kuim; + } + + if ( !kuim ) { + slotBusy(); + +// #ifndef NDEBUG +// struct timeval tms1, tms2; +// gettimeofday( &tms1, NULL ); +// #endif + + ImlibImage *im = Imlib_load_image( myId, + QFile::encodeName( file->localFile() ).data() ); + +// #ifndef NDEBUG +// gettimeofday( &tms2, NULL ); +// qDebug("*** LOADING image: %s, took %ld ms", file.latin1(), +// (tms2.tv_usec - tms1.tv_usec)/1000); +// #endif + + slotIdle(); + if ( !im ) { + slotBusy(); + im = loadImageWithQt( file->localFile() ); + slotIdle(); + if ( !im ) + return 0L; + } + + Imlib_set_image_modifier( myId, im, &mod ); + kuim = new KuickImage( file, im, myId ); + connect( kuim, SIGNAL( startRendering() ), SLOT( slotBusy() )); + connect( kuim, SIGNAL( stoppedRendering() ), SLOT( slotIdle() )); + + kuickList.insert( 0, kuim ); + fileList.prepend( file ); + } + + if ( kuickList.count() > (uint) myMaxImages ) { +// qDebug(":::: now removing from cache: %s", (*fileList.fromLast()).latin1()); + kuickList.removeLast(); + fileList.remove( fileList.fromLast() ); + } + + return kuim; +} + + +// Note: the returned image's filename will not be the real filename (which it usually +// isn't anyway, according to Imlib's sources). +ImlibImage * ImageCache::loadImageWithQt( const QString& fileName ) const +{ + kdDebug() << "Trying to load " << fileName << " with KImageIO..." << endl; + + KImageIO::registerFormats(); + + QImage image( fileName ); + if ( image.isNull() ) + return 0L; + if ( image.depth() != 32 ) { + image.setAlphaBuffer(false); + image = image.convertDepth(32); + + if ( image.isNull() ) + return 0L; + } + + // convert to 24 bpp (discard alpha) + int numPixels = image.width() * image.height(); + const int NUM_BYTES_NEW = 3; // 24 bpp + uchar *newImageData = new uchar[numPixels * NUM_BYTES_NEW]; + uchar *newData = newImageData; + + int w = image.width(); + int h = image.height(); + + for (int y = 0; y < h; y++) { + QRgb *scanLine = reinterpret_cast<QRgb *>( image.scanLine(y) ); + for (int x = 0; x < w; x++) { + const QRgb& pixel = scanLine[x]; + *(newData++) = qRed(pixel); + *(newData++) = qGreen(pixel); + *(newData++) = qBlue(pixel); + } + } + + ImlibImage *im = Imlib_create_image_from_data( myId, newImageData, NULL, + image.width(), image.height() ); + + delete[] newImageData; + + return im; +} + +#include "imlibwidget.moc" diff --git a/kuickshow/src/imlibwidget.h b/kuickshow/src/imlibwidget.h new file mode 100644 index 0000000..d4c1256 --- /dev/null +++ b/kuickshow/src/imlibwidget.h @@ -0,0 +1,187 @@ +/**************************************************************************** +** $Id: imlibwidget.h 524709 2006-03-31 00:03:44Z pfeiffer $ +** +** ImlibWidget: maps an Xlib window with Imlib's contents on a QWidget +** +** Created : 98 +** +** Copyright (C) 1998-2001 by Carsten Pfeiffer. All rights reserved. +** +****************************************************************************/ + +#ifndef IMLIBWIDGET_H +#define IMLIBWIDGET_H + +#include <qvariant.h> + +#include <qcursor.h> +#include <qevent.h> +#include <qptrlist.h> +#include <qtimer.h> +#include <qwidget.h> + +#include <kurl.h> + +// #include those AFTER Qt-includes! +#include <Imlib.h> +#include <X11/Xlib.h> +#include <X11/Xutil.h> +// #include <X11/extensions/shape.h> + +#include "imdata.h" +#include "kuickdata.h" + +class KuickFile; +class KuickImage; + +class ImageCache : public QObject +{ + Q_OBJECT + +public: + ImageCache( ImlibData *id, int maxImages=1 ); + ~ImageCache(); + + void setMaxImages( int maxImages ); + int maxImages() const { return myMaxImages; } + + KuickImage * getKuimage( KuickFile * file, ImlibColorModifier ); + +private: + ImlibImage * loadImageWithQt( const QString& filename ) const; + + int myMaxImages; + QValueList<KuickFile*>fileList; + QPtrList<KuickImage> kuickList; + // QPtrList<ImlibImage> imList; + ImlibData * myId; + int idleCount; + +private slots: + void slotBusy(); + void slotIdle(); + +signals: + void sigBusy(); + void sigIdle(); + +}; + + +// ------------------------------------------ + +class QColor; + +class ImlibWidget : public QWidget +{ + Q_OBJECT + +public: + + ImlibWidget( ImData *_idata=0, QWidget *parent=0, const char *name=0 ); + ImlibWidget( ImData *_idata, ImlibData *id, QWidget *parent=0, + const char *name=0 ); + virtual ~ImlibWidget(); + + KURL url() const; + KuickFile * currentFile() const; + bool loadImage( KuickFile * file ); + bool loadImage( const KURL& url ); + bool cacheImage(const KURL& url ); + void zoomImage( float ); + void setBrightness( int ); + void setContrast( int ); + void setGamma( int ); + void setRotation( Rotation ); + void setFlipMode( int mode ); + + int brightness() const; // ### no impl! + int contrast() const; // ### no impl! + int gamma() const; // ### no impl! + Rotation rotation() const; + FlipMode flipMode() const; + + int imageWidth() const; + int imageHeight() const; + + void setAutoRender( bool enable ) { isAutoRendering = enable;} + bool isAutoRenderEnabled() const { return isAutoRendering; } + void setMaxImageCache( int ); + int maxImageCache() const { return myMaxImageCache; } + const QColor& backgroundColor() const; + void setBackgroundColor( const QColor& ); + + /** + * @return true if auto-rotation is not possible, e.g. because no metadata + * about orientation is available + */ + virtual bool autoRotate( KuickImage *kuim ); + + ImlibData* getImlibData() const { return id; } + + virtual void reparent( QWidget* parent, WFlags f, const QPoint& p, bool showIt = FALSE ); + +public slots: + void rotate90(); + void rotate270(); + void rotate180(); + void flipHoriz(); + void flipVert(); + void showImageOriginalSize(); + inline void updateImage() { updateWidget( true ); } + + +protected: + KuickImage * loadImageInternal( KuickFile * file ); + void showImage(); + void setImageModifier(); + void rotate( int ); + void updateWidget( bool geometryUpdate=true ); + virtual void updateGeometry( int width, int height ); + virtual void loaded( KuickImage * ); + virtual bool canZoomTo( int newWidth, int newHeight ); + virtual void rotated( KuickImage *kuim, int rotation ); + + void closeEvent( QCloseEvent * ); + + inline void autoUpdate( bool geometryUpdate=false ) { + if ( isAutoRendering ) + updateWidget( geometryUpdate ); + } + + bool stillResizing, deleteImData, deleteImlibData; + bool imlibModifierChanged; + + KuickImage *m_kuim; + ImageCache *imageCache; + ImlibData *id; + ImData *idata; + Window win; + ImlibColorModifier mod; + + KuickFile *m_kuickFile; + QCursor m_oldCursor; + + static const int ImlibOffset; + + +private: + void init(); + bool isAutoRendering; + int myMaxImageCache; + QColor myBackgroundColor; + + +protected slots: + bool cacheImage( KuickFile *file ); + virtual void setBusyCursor(); + virtual void restoreCursor(); + + +signals: + void sigImageError( const KuickFile * file, const QString& ); + +}; + + +#endif diff --git a/kuickshow/src/kuick.cpp b/kuickshow/src/kuick.cpp new file mode 100644 index 0000000..43eadb5 --- /dev/null +++ b/kuickshow/src/kuick.cpp @@ -0,0 +1,4 @@ +#include "kuick.h" + +Kuick * Kuick::s_self = 0L; +QSize Kuick::s_frameSize; diff --git a/kuickshow/src/kuick.h b/kuickshow/src/kuick.h new file mode 100644 index 0000000..bc86d5d --- /dev/null +++ b/kuickshow/src/kuick.h @@ -0,0 +1,70 @@ +/* This file is part of the KDE project + Copyright (C) 2000,2001,2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef KUICKGLOBALS_H +#define KUICKGLOBALS_H + +#include <qrect.h> +#include <qsize.h> + +#include <kwin.h> +#include <kwinmodule.h> + +class Kuick +{ +public: + static QRect workArea() { + return self()->winModule.workArea(); + } + + static QSize frameSize( WId win = 0L ) { + if ( win ) { + KWin::WindowInfo info = KWin::windowInfo(win, NET::WMKDEFrameStrut | NET::WMGeometry); + int wborder = info.frameGeometry().width() - info.geometry().width(); + int hborder = info.frameGeometry().height() - info.geometry().height(); + + if ( wborder || hborder ) { // we get a 0,0 border when not shown + s_frameSize.setWidth( wborder ); + s_frameSize.setHeight( hborder ); + } + } + + if ( !s_frameSize.isValid() ) + return QSize( 0, 0 ); + + return s_frameSize; + } + + static Kuick * self() { + if ( !s_self ) { + s_self = new Kuick; + } + return s_self; + } + + KWinModule winModule; + +private: + Kuick() {} + static Kuick * s_self; + + static QSize s_frameSize; +}; + + +#endif // KUICKGLOBALS_H diff --git a/kuickshow/src/kuickconfigdlg.cpp b/kuickshow/src/kuickconfigdlg.cpp new file mode 100644 index 0000000..6ece888 --- /dev/null +++ b/kuickshow/src/kuickconfigdlg.cpp @@ -0,0 +1,99 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + + +#ifdef index +#undef index +#endif +#include "kuickconfigdlg.h" + +#include <qkeycode.h> +#include <qvbox.h> + +#include <kaccel.h> +#include <kconfig.h> +#include <kglobal.h> +#include <klocale.h> + +#include "imagewindow.h" +#include "defaultswidget.h" +#include "generalwidget.h" +#include "slideshowwidget.h" + +#include "kuickdata.h" + + +KuickConfigDialog::KuickConfigDialog( KActionCollection *_coll, QWidget *parent, + const char *name, bool modal ) + : KDialogBase( Tabbed, i18n("Configure"), + Help | Default | Ok | Apply | Cancel, Ok, + parent, name, modal ) +{ + coll = _coll; + QVBox *box = addVBoxPage( i18n("&General") ); + generalWidget = new GeneralWidget( box, "general widget" ); + + box = addVBoxPage( i18n("&Modifications") ); + defaultsWidget = new DefaultsWidget( box, "defaults widget" ); + + box = addVBoxPage( i18n("&Slideshow") ); + slideshowWidget = new SlideShowWidget( box, "slideshow widget" ); + + box = addVBoxPage( i18n("&Viewer Shortcuts") ); + + imageWindow = new ImageWindow(); // just to get the accel... + imageWindow->hide(); + + imageKeyChooser = new KKeyChooser( imageWindow->actionCollection(), box ); + + box = addVBoxPage( i18n("Bro&wser Shortcuts") ); + browserKeyChooser = new KKeyChooser( coll, box ); + + connect( this, SIGNAL( defaultClicked() ), SLOT( resetDefaults() )); +} + +KuickConfigDialog::~KuickConfigDialog() +{ + imageWindow->close( true ); +} + +void KuickConfigDialog::applyConfig() +{ + generalWidget->applySettings( *kdata ); + defaultsWidget->applySettings( *kdata ); + slideshowWidget->applySettings( *kdata ); + + imageKeyChooser->save(); + browserKeyChooser->save(); + + KGlobal::config()->sync(); +} + + +void KuickConfigDialog::resetDefaults() +{ + KuickData data; + generalWidget->loadSettings( data ); + defaultsWidget->loadSettings( data ); + slideshowWidget->loadSettings( data ); + + imageKeyChooser->allDefault(); + browserKeyChooser->allDefault(); +} + +#include "kuickconfigdlg.moc" diff --git a/kuickshow/src/kuickconfigdlg.h b/kuickshow/src/kuickconfigdlg.h new file mode 100644 index 0000000..884d91d --- /dev/null +++ b/kuickshow/src/kuickconfigdlg.h @@ -0,0 +1,58 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef KUICKCONFIGDLG_H +#define KUICKCONFIGDLG_H + +#include <qevent.h> + +#include <kkeydialog.h> + +#include <kdialogbase.h> + +class GeneralWidget; +class DefaultsWidget; +class SlideShowWidget; +class ImageWindow; + +class KuickConfigDialog : public KDialogBase +{ + Q_OBJECT + +public: + KuickConfigDialog( KActionCollection *coll, QWidget *parent=0, + const char *name=0, bool modal=true); + ~KuickConfigDialog(); + + void applyConfig(); + +private slots: + void resetDefaults(); + +private: + DefaultsWidget *defaultsWidget; + GeneralWidget *generalWidget; + SlideShowWidget *slideshowWidget; + KKeyChooser *imageKeyChooser, *browserKeyChooser; + KActionCollection *coll; + + ImageWindow *imageWindow; + +}; + +#endif diff --git a/kuickshow/src/kuickdata.cpp b/kuickshow/src/kuickdata.cpp new file mode 100644 index 0000000..c6aa47c --- /dev/null +++ b/kuickshow/src/kuickdata.cpp @@ -0,0 +1,177 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <stdlib.h> + +#include <qcolor.h> +#include <kconfig.h> +#include <kglobal.h> + +#include "kuickdata.h" + + +KuickData::KuickData() +{ + fileFilter = "*.jpeg *.jpg *.gif *.xpm *.ppm *.pgm *.pbm *.pnm *.png *.bmp *.psd *.eim *.tif *.tiff *.xcf";// *.mng"; + slideDelay = 3000; + slideshowCycles = 1; + slideshowFullscreen = true; + slideshowStartAtFirst = true; + + preloadImage = true; + + isModsEnabled = true; + fullScreen = false; + autoRotation = true; + downScale = true; + upScale = false; + flipVertically = false; + flipHorizontally = false; + + maxUpScale = 3; + rotation = ROT_0; + + brightnessSteps = 1; + contrastSteps = 1; + gammaSteps = 1; + scrollSteps = 1; + zoomSteps = 1.5; + + maxZoomFactor = 4.0; + + maxCachedImages = 4; + backgroundColor = Qt::black; + + startInLastDir = true; + + idata = new ImData; +} + +KuickData::~KuickData() +{ + delete idata; +} + + +void KuickData::load() +{ + KConfig *kc = KGlobal::config(); + + KuickData def; + + kc->setGroup( "GeneralConfiguration" ); + fileFilter = kc->readEntry( "FileFilter", def.fileFilter ); + slideDelay = kc->readNumEntry( "SlideShowDelay", def.slideDelay ); + slideshowCycles = kc->readUnsignedNumEntry( "SlideshowCycles", 1 ); + slideshowFullscreen = kc->readBoolEntry( "SlideshowFullscreen", true ); + slideshowStartAtFirst = kc->readBoolEntry("SlideshowStartAtFirst", true ); + + preloadImage = kc->readBoolEntry( "PreloadNextImage", def.preloadImage ); + + fullScreen = kc->readBoolEntry( "Fullscreen", def.fullScreen); + autoRotation = kc->readBoolEntry( "AutoRotation", def.autoRotation); + downScale = kc->readBoolEntry( "ShrinkToScreenSize", def.downScale ); + upScale = kc->readBoolEntry( "ZoomToScreenSize", def.upScale ); + flipVertically = kc->readBoolEntry( "FlipVertically", def.flipVertically ); + flipHorizontally = kc->readBoolEntry( "FlipHorizontally", + def.flipHorizontally ); + maxUpScale = kc->readNumEntry( "MaxUpscale Factor", def.maxUpScale ); + rotation = (Rotation) kc->readNumEntry( "Rotation", def.rotation ); + + isModsEnabled = kc->readBoolEntry( "ApplyDefaultModifications", + def.isModsEnabled ); + + brightnessSteps = kc->readNumEntry("BrightnessStepSize",def.brightnessSteps); + contrastSteps = kc->readNumEntry("ContrastStepSize", def.contrastSteps); + gammaSteps = kc->readNumEntry("GammaStepSize", def.gammaSteps); + scrollSteps = kc->readNumEntry("ScrollingStepSize", def.scrollSteps); + zoomSteps = kc->readDoubleNumEntry("ZoomStepSize", def.zoomSteps); + + maxZoomFactor = kc->readDoubleNumEntry( "MaximumZoomFactorByDesktop", def.maxZoomFactor ); + + maxCachedImages = kc->readUnsignedNumEntry( "MaxCachedImages", + def.maxCachedImages ); + backgroundColor = kc->readColorEntry( "BackgroundColor", &Qt::black ); + + startInLastDir = kc->readBoolEntry( "StartInLastDir", true); + + idata->load( kc ); + + // compatibility with KuickShow <= 0.8.3 + switch ( rotation ) + { + case 90: + rotation = ROT_90; + break; + case 180: + rotation = ROT_180; + break; + case 270: + rotation = ROT_270; + break; + default: + if ( (rotation < ROT_0) || (rotation > ROT_270) ) + rotation = ROT_0; + break; + } +} + + +void KuickData::save() +{ + KConfig *kc = KGlobal::config(); + kc->setGroup( "GeneralConfiguration" ); + + kc->writeEntry( "FileFilter", fileFilter ); + kc->writeEntry( "SlideShowDelay", slideDelay ); + kc->writeEntry( "SlideshowCycles", slideshowCycles ); + kc->writeEntry( "SlideshowFullscreen", slideshowFullscreen ); + kc->writeEntry( "SlideshowStartAtFirst", slideshowStartAtFirst ); + + kc->writeEntry( "PreloadNextImage", preloadImage ); + + kc->writeEntry( "Fullscreen", fullScreen ); + kc->writeEntry( "AutoRotation", autoRotation ); + kc->writeEntry( "ShrinkToScreenSize", downScale ); + kc->writeEntry( "ZoomToScreenSize", upScale ); + kc->writeEntry( "FlipVertically", flipVertically ); + kc->writeEntry( "FlipHorizontally", flipHorizontally ); + kc->writeEntry( "MaxUpscale Factor", maxUpScale ); + kc->writeEntry( "Rotation", rotation ); + + kc->writeEntry( "ApplyDefaultModifications", isModsEnabled ); + + + kc->writeEntry( "BrightnessStepSize", brightnessSteps ); + kc->writeEntry( "ContrastStepSize", contrastSteps ); + kc->writeEntry( "GammaStepSize", gammaSteps ); + + kc->writeEntry( "ScrollingStepSize", scrollSteps ); + kc->writeEntry( "ZoomStepSize", zoomSteps ); + + kc->writeEntry( "MaximumZoomFactorByDesktop", maxZoomFactor ); + + kc->writeEntry( "MaxCachedImages", maxCachedImages ); + kc->writeEntry( "BackgroundColor", backgroundColor ); + + kc->writeEntry( "StartInLastDir", startInLastDir ); + + idata->save( kc ); + + kc->sync(); +} diff --git a/kuickshow/src/kuickdata.h b/kuickshow/src/kuickdata.h new file mode 100644 index 0000000..d05b3e9 --- /dev/null +++ b/kuickshow/src/kuickdata.h @@ -0,0 +1,86 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2003 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef KUICKDATA_H +#define KUICKDATA_H + +#include <qcolor.h> +#include <qstring.h> + +#include "imdata.h" + +class KConfig; + +// values are also used as combobox index defaultswidget.* +enum Rotation { ROT_0=0, ROT_90=1, ROT_180=2, ROT_270=3 }; + +// hmm, global declaration for now +enum FlipMode { FlipNone = 0, FlipHorizontal = 1, FlipVertical = 2 }; + +class KuickData +{ +public: + KuickData(); + ~KuickData(); + + void load(); + void save(); + + + ImData *idata; + + QString fileFilter; + uint slideDelay; + uint slideshowCycles; + bool slideshowFullscreen :1; + bool slideshowStartAtFirst :1; + + int brightnessSteps; + int contrastSteps; + int gammaSteps; + + int scrollSteps; + float zoomSteps; + + bool startInLastDir :1; + + bool preloadImage :1; + bool autoRotation :1; + bool fullScreen :1; + + // default image modifications + bool isModsEnabled :1; + + bool flipVertically :1; + bool flipHorizontally :1; + bool downScale :1; + bool upScale :1; + int maxUpScale; + float maxZoomFactor; + uint maxCachedImages; + Rotation rotation; + + QColor backgroundColor; + + +}; + + +extern KuickData* kdata; + +#endif diff --git a/kuickshow/src/kuickfile.cpp b/kuickshow/src/kuickfile.cpp new file mode 100644 index 0000000..1dd259d --- /dev/null +++ b/kuickshow/src/kuickfile.cpp @@ -0,0 +1,194 @@ +#include <qfile.h> + +#include <kdebug.h> +#include <kdeversion.h> +#include <kinstance.h> +#include <klocale.h> +#include <kprogress.h> +#include <kio/job.h> +#include <kio/netaccess.h> +#include <ktempfile.h> + +#include "filecache.h" +#include "kuickfile.h" + +KuickFile::KuickFile(const KURL& url) + : QObject(), + m_url( url ), + m_job( 0L ), + m_progress( 0L ), + m_currentProgress( 0 ) +{ + if ( m_url.isLocalFile()) + m_localFile = m_url.path(); + else { + const KURL& mostLocal = KIO::NetAccess::mostLocalURL( m_url, 0L ); + if ( mostLocal.isValid() && mostLocal.isLocalFile() ) + m_localFile = mostLocal.path(); + } +} + +KuickFile::~KuickFile() +{ + delete m_job; + + if ( hasDownloaded() ) + QFile::remove( m_localFile ); +} + +QString KuickFile::localFile() const +{ + // Note: never call isAvailable() from here, directly or indirectly + + if ( isDownloading() ) + return QString::null; + + return m_localFile; +} + +bool KuickFile::hasDownloaded() const +{ + return !m_url.isLocalFile() && isAvailable() && m_job != 0L; +} + +// ### need an API for refreshing the file? +bool KuickFile::download() +{ + if ( m_url.isLocalFile() || isAvailable() ) + return true; + + if ( isDownloading() ) + return true; + + // reinitialize + m_localFile = QString::null; + m_currentProgress = 0; + + + QString ext; + QString fileName = m_url.fileName(); + int extIndex = fileName.findRev('.'); + if ( extIndex > 0 ) + ext = fileName.mid( extIndex + 1 ); + + QString tempDir = FileCache::self()->tempDir(); + KTempFile tempFile( tempDir, ext ); + tempFile.setAutoDelete( tempDir.isNull() ); // in case there is no proper tempdir, make sure to delete those files! + if ( tempFile.status() != 0 ) + return false; + + tempFile.close(); + if ( tempFile.status() != 0 ) + return false; + + KURL destURL; + destURL.setPath( tempFile.name() ); + + m_job = KIO::file_copy( m_url, destURL, -1, true, false, false ); // handling progress ourselves + m_job->setAutoErrorHandlingEnabled( true ); + connect( m_job, SIGNAL( result( KIO::Job * )), SLOT( slotResult( KIO::Job * ) )); + connect( m_job, SIGNAL( percent( KIO::Job *, unsigned long )), SLOT( slotProgress( KIO::Job *, unsigned long ) )); + + // TODO: generify background/foreground downloading? + + return m_job != 0L; +} + +KuickFile::DownloadStatus KuickFile::waitForDownload( QWidget *parent ) +{ + if ( isAvailable() ) + return OK; + + if ( !isDownloading() ) { + if ( !download() ) + return ERROR; + } + + KProgressDialog *dialog = new KProgressDialog( parent ); + dialog->setModal( true ); + dialog->setCaption( i18n("Downloading %1...").arg( m_url.fileName() ) ); + dialog->setLabel( i18n("Please wait while downloading\n%1").arg( m_url.prettyURL() )); + dialog->setAllowCancel( true ); + dialog->setAutoClose( true ); + + m_progress = dialog->progressBar(); + m_progress->setTotalSteps( 100 ); // percent + m_progress->setProgress( m_currentProgress ); + dialog->exec(); + bool canceled = dialog->wasCancelled(); + delete dialog; + m_progress = 0L; + + if ( canceled && m_job ) { + m_job->kill(); + m_job = 0L; + m_currentProgress = 0; + } + // ### when aborted, remove KuickImage from FileCache? + + if ( canceled ) + return CANCELED; + + if ( !isAvailable() ) + return ERROR; + + // ### use custom progress dialog with OK, SKIP, CANCEL? + return OK; +} + +void KuickFile::slotResult( KIO::Job *job ) +{ + if (job != m_job) { // huh? + return; + } + + m_job = 0L; + + if ( job->error() != 0 ) { + m_currentProgress = 0; + + if ( job->error() != KIO::ERR_USER_CANCELED ) + kdWarning() << "ERROR: KuickFile::slotResult: " << job->errorString() << endl; + + QString canceledFile = static_cast<KIO::FileCopyJob*>(job)->destURL().path(); + QFile::remove( canceledFile ); + m_progress->topLevelWidget()->hide(); + } + else { + m_localFile = static_cast<KIO::FileCopyJob*>(job)->destURL().path(); + emit downloaded( this ); // before closing the progress dialog + + if ( m_progress ) { + m_progress->setProgress( 100 ); +#define BUGGY_VERSION KDE_MAKE_VERSION(3,5,2) + if ( KDE::version() <= BUGGY_VERSION ) { + m_progress->topLevelWidget()->hide(); // ### workaround broken KProgressDialog + } + } + } +} + +void KuickFile::slotProgress( KIO::Job *job, unsigned long percent ) +{ + if (job != m_job) { // huh? + return; + } + + m_currentProgress = percent; + + if ( !m_progress ) + return; + + // only set 100% in slotResult. Otherwise, the progress dialog would be closed + // before slotResult() is called. + if ( percent >= 100 ) + percent = 99; + + m_progress->setProgress( (int) percent ); +} + +bool operator==( const KuickFile& first, const KuickFile& second ) { + return first.url().equals( second.url() ); +} + +#include "kuickfile.moc" diff --git a/kuickshow/src/kuickfile.h b/kuickshow/src/kuickfile.h new file mode 100644 index 0000000..957db6e --- /dev/null +++ b/kuickshow/src/kuickfile.h @@ -0,0 +1,99 @@ +/**************************************************************************** +** $Id: .emacs,v 1.3 2002/02/20 15:06:53 gis Exp $ +** +** Created : 2006 +** +** Copyright (C) 2006 Carsten Pfeiffer <pfeiffer@kde.org> +** +****************************************************************************/ + +#ifndef KUICKFILE_H +#define KUICKFILE_H + +#include <qobject.h> +#include <qstring.h> + +#include <kurl.h> +#include <kprogress.h> + +namespace KIO { + class Job; + class FileCopyJob; +} + +class KuickFile : public QObject +{ + Q_OBJECT + +public: + enum DownloadStatus + { + OK = 1, + CANCELED, + ERROR + }; + + KuickFile(const KURL& url); + + /** + * Cleans up resources and removes any temporary file, if available. + */ + ~KuickFile(); + + const KURL& url() const { return m_url; } + + + QString localFile() const; + + bool download(); + + /** + * @return true if download is in progress + */ + bool isDownloading() const { return m_job != 0L; } + + /** + * @return true if a local file is available, that is, + * @ref #localFile will return a non-empty name + * ### HERE ADD mostlylocal thing! + */ + bool isAvailable() const { return !localFile().isEmpty(); } + + /** + * @return true if @ref #isAvailable() returns true AND @ref #url() is a remote URL, + * i.e. the file really has been downloaded. + */ + bool hasDownloaded() const; + + /** + * Opens a modal dialog window, blocking user interaction until the download + * has finished. If the file is already available, this function will return true + * immediately. + * @return true when the download has finished or false when the user aborted the dialog + */ + KuickFile::DownloadStatus waitForDownload( QWidget *parent ); + +// bool needsDownload(); + +signals: + /** + * Signals that download has finished for that file. Will only be emitted for non-local files! + */ + void downloaded( KuickFile * ); + +private slots: + void slotResult( KIO::Job *job ); + void slotProgress( KIO::Job *job, unsigned long percent ); + +private: + KURL m_url; + QString m_localFile; + KIO::FileCopyJob *m_job; + KProgress *m_progress; + int m_currentProgress; + +}; + +bool operator==( const KuickFile& first, const KuickFile& second ); + +#endif // KUICKFILE_H diff --git a/kuickshow/src/kuickglobals.h b/kuickshow/src/kuickglobals.h new file mode 100644 index 0000000..4ea2ff3 --- /dev/null +++ b/kuickshow/src/kuickglobals.h @@ -0,0 +1,33 @@ +/* This file is part of the KDE project + Copyright (C) 2001,2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef KUICKGLOBALS_H +#define KUICKGLOBALS_H + +#include <kwinmodule.h> + +class KuickGlobals +{ +public: + KWinModule winModule; + + +}; + + +#endif // KUICKGLOBALS_H diff --git a/kuickshow/src/kuickimage.cpp b/kuickshow/src/kuickimage.cpp new file mode 100644 index 0000000..29e5de1 --- /dev/null +++ b/kuickshow/src/kuickimage.cpp @@ -0,0 +1,527 @@ +#include "kuickimage.h" + +KuickImage::KuickImage( const KuickFile * file, ImlibImage *im, ImlibData *id) + : QObject( 0L, 0L ) +{ + myFile = file; + myOrigIm = 0L; + myIm = im; + myId = id; + myPixmap = 0L; + myWidth = im->rgb_width; + myHeight = im->rgb_height; + myIsDirty = true; + + myOrigWidth = myWidth; + myOrigHeight = myHeight; + myRotation = ROT_0; + myFlipMode = FlipNone; +} + +KuickImage::~KuickImage() +{ + if ( myPixmap ) + Imlib_free_pixmap( myId, myPixmap ); + + if ( myOrigIm ) + { + Imlib_destroy_image( myId, myOrigIm ); + Imlib_kill_image( myId, myIm ); // kill scaled image (### really? analyze!) + } + else + Imlib_destroy_image( myId, myIm ); +} + + +Pixmap& KuickImage::pixmap() +{ + if ( myIsDirty ) + renderPixmap(); + + return myPixmap; +} + + +void KuickImage::renderPixmap() +{ + if ( !myIsDirty ) + return; + +// qDebug("### rendering: %s", myFilename.latin1()); + + if ( myPixmap ) + Imlib_free_pixmap( myId, myPixmap ); + + emit startRendering(); + +// #ifndef NDEBUG +// struct timeval tms1, tms2; +// gettimeofday( &tms1, NULL ); +// #endif + + Imlib_render( myId, myIm, myWidth, myHeight ); + myPixmap = Imlib_move_image( myId, myIm ); + +// #ifndef NDEBUG +// gettimeofday( &tms2, NULL ); +// qDebug("*** rendering image: %s, took %ld ms", myFilename.latin1(), +// (tms2.tv_usec - tms1.tv_usec)/1000); +// #endif + + emit stoppedRendering(); + + myIsDirty = false; +} + + +void KuickImage::rotate( Rotation rot ) +{ + if ( rot == ROT_180 ) { // rotate 180 degrees + Imlib_flip_image_horizontal( myId, myIm ); + Imlib_flip_image_vertical( myId, myIm ); + } + + else if ( rot == ROT_90 || rot == ROT_270 ) { + qSwap( myWidth, myHeight ); + Imlib_rotate_image( myId, myIm, -1 ); + + if ( rot == ROT_90 ) // rotate 90 degrees + Imlib_flip_image_horizontal( myId, myIm ); + else if ( rot == ROT_270 ) // rotate 270 degrees + Imlib_flip_image_vertical( myId, myIm ); + } + + myRotation = (Rotation) ((myRotation + rot) % 4); + myIsDirty = true; +} + + +bool KuickImage::rotateAbs( Rotation rot ) +{ + if ( myRotation == rot ) + return false; + + int diff = rot - myRotation; + bool clockWise = (diff > 0); + + switch( abs(diff) ) { + case ROT_90: + rotate( clockWise ? ROT_90 : ROT_270 ); + break; + case ROT_180: + rotate( ROT_180 ); + break; + case ROT_270: + rotate( clockWise ? ROT_270 : ROT_90 ); + break; + } + + return true; +} + +void KuickImage::flip( FlipMode flipMode ) +{ + if ( flipMode & FlipHorizontal ) + Imlib_flip_image_horizontal( myId, myIm ); + if ( flipMode & FlipVertical ) + Imlib_flip_image_vertical( myId, myIm ); + + myFlipMode = (FlipMode) (myFlipMode ^ flipMode); + myIsDirty = true; +} + +bool KuickImage::flipAbs( int mode ) +{ + if ( myFlipMode == mode ) + return false; + + bool changed = false; + + if ( ((myFlipMode & FlipHorizontal) && !(mode & FlipHorizontal)) || + (!(myFlipMode & FlipHorizontal) && (mode & FlipHorizontal)) ) { + Imlib_flip_image_horizontal( myId, myIm ); + changed = true; + } + + if ( ((myFlipMode & FlipVertical) && !(mode & FlipVertical)) || + (!(myFlipMode & FlipVertical) && (mode & FlipVertical)) ) { + Imlib_flip_image_vertical( myId, myIm ); + changed = true; + } + + if ( changed ) { + myFlipMode = (FlipMode) mode; + myIsDirty = true; + return true; + } + + return false; +} + + +void KuickImage::restoreOriginalSize() +{ + if (myWidth == myOrigWidth && myHeight == myOrigHeight) + return; + +// qDebug("-- restoreOriginalSize"); + + if ( myOrigIm != 0L ) + { + Imlib_destroy_image( myId, myIm ); + myIm = myOrigIm; + myOrigIm = 0L; + } + + myWidth = myOrigWidth; + myHeight = myOrigHeight; + myIsDirty = true; + + if ( myRotation == ROT_90 || myRotation == ROT_270 ) + qSwap( myWidth, myHeight ); +} + +void KuickImage::resize( int width, int height, KuickImage::ResizeMode mode ) +{ + if ( myWidth == width && myHeight == height ) + return; + + if ( mode == KuickImage::SMOOTH ) + { + if ( !smoothResize( width, height ) ) + fastResize( width, height ); + } + else + { + fastResize( width, height ); + } +} + + +void KuickImage::fastResize( int width, int height ) +{ +// qDebug("-- fastResize: %i x %i", width, height ); + + // lazy resizing (only done when rendering pixmap) + myWidth = width; + myHeight = height; + myIsDirty = true; +} + +bool KuickImage::smoothResize( int newWidth, int newHeight ) +{ +// qDebug("-- smoothResize: %i x %i", newWidth, newHeight); + + QImage *image = newQImage(); + // Note: QImage::ScaleMin seems to have a bug (off-by-one, sometimes results in width being 1 pixel too small) + QImage scaledImage = image->smoothScale(newWidth, newHeight, QImage::ScaleFree); + + delete image; + + + ImlibImage *newIm = toImage( myId, scaledImage ); + if ( newIm ) + { + if ( myOrigIm == 0 ) + myOrigIm = myIm; + + myIm = newIm; + myWidth = newWidth; + myHeight = newHeight; + myIsDirty = true; + return true; + } + + return false; +} + +QImage * KuickImage::newQImage() const +{ + ImlibImage *im; + +// qDebug("-- newQImage"); + + if ( myOrigIm != 0L && myRotation == ROT_0 && myFlipMode == FlipNone ) + { + // use original image if no other modifications have been applied + // ### use orig image always and reapply mods? + im = myOrigIm; + } + else + { + im = myIm; + } + + int w = im->rgb_width; + int h = im->rgb_height; + + QImage *image = new QImage( w, h, 32 ); + uchar *rgb = im->rgb_data; + QRgb **destImageData = reinterpret_cast<QRgb**>( image->jumpTable() ); + + + int byteIndex = 0; + int destLineIndex = 0; + int destByteIndex = 0; + for ( int pixel = 0; pixel < (w * h); pixel++ ) + { + if ( pixel != 0 && (pixel % w) == 0 ) + { + destLineIndex++; + destByteIndex = 0; + } + + uchar r = rgb[byteIndex++]; + uchar g = rgb[byteIndex++]; + uchar b = rgb[byteIndex++]; + + QRgb rgbPixel = qRgb( r, g, b ); + destImageData[destLineIndex][destByteIndex++] = rgbPixel; + } + + return image; +} + +ImlibImage * KuickImage::toImage( ImlibData *id, QImage& image ) +{ + if ( image.isNull() ) + return 0L; + + if ( image.depth() != 32 ) + { + image.setAlphaBuffer(false); + image = image.convertDepth(32); + + if ( image.isNull() ) + return 0L; + } + + // convert to 24 bpp (discard alpha) + int numPixels = image.width() * image.height(); + const int NUM_BYTES_NEW = 3; // 24 bpp + uchar *newImageData = new uchar[numPixels * NUM_BYTES_NEW]; + uchar *newData = newImageData; + + int w = image.width(); + int h = image.height(); + + for (int y = 0; y < h; y++) { + QRgb *scanLine = reinterpret_cast<QRgb *>( image.scanLine(y) ); + for (int x = 0; x < w; x++) { + const QRgb& pixel = scanLine[x]; + *(newData++) = qRed(pixel); + *(newData++) = qGreen(pixel); + *(newData++) = qBlue(pixel); + } + } + + ImlibImage *im = Imlib_create_image_from_data( id, newImageData, NULL, + image.width(), image.height() ); + + delete [] newImageData; + + return im; +} + + +#if 0 +bool KuickImage::smoothResize( int newWidth, int newHeight ) +{ + int numPixels = newWidth * newHeight; + const int NUM_BYTES_NEW = 3; // 24 bpp + uchar *newImageData = new uchar[numPixels * NUM_BYTES_NEW]; + + // ### endianness + // myIm : old image, old size + + + ///////////////////////////////////////////////// +// int w = myOrigWidth; //myViewport.width(); + //int h = myOrigHeight; //myViewport.height(); + + //QImage dst(w, h, myIm->depth(), myIm->numColors(), myIm->bitOrder()); + + //QRgb *scanline; + + int basis_ox, basis_oy, basis_xx, basis_yy; + + // ### we only scale with a fixed factor for x and y anyway + double scalex = newWidth / (double) myOrigWidth; + double scaley = newHeight / (double) myOrigHeight; + +// basis_ox=(int) (myViewport.left() * 4096.0 / scalex); +// basis_oy=(int) (myViewport.top() * 4096.0 / scaley); + basis_ox = 0; + basis_oy = 0; + basis_xx = (int) (4096.0 / scalex); + basis_yy = (int) (4096.0 / scaley); + + //qDebug("Basis: (%d, %d), (%d, 0), (0, %d)", basis_ox, basis_oy, basis_xx, basis_yy); + + int x2, y2; + + int max_x2 = (myOrigWidth << 12); + int max_y2 = (myOrigHeight << 12); + +// QRgb background = idata->backgroundColor.rgb(); + +// QRgb **imdata = (QRgb **) myIm->jumpTable(); +// QRgb *imdata = reinterpret_cast<QRgb*>( myIm->rgb_data ); + uchar *imdata = myIm->rgb_data; + + + int y = 0; + + +// for (;;) //fill the top of the target pixmap with the background color +// { +// y2 = basis_oy + y * basis_yy; +// +// if ((y2 >= 0 && (y2 >> 12) < myIm->height()) || y >= h) +// break; +// +// scanline = (QRgb*) dst.scanLine(y); +// for (int i = 0; i < w; i++) +// *(scanline++) = background; //qRgb(0,255,0); +// y++; +// } + + for (; y < newHeight; y++) + { +// scanline = (QRgb*) dst.scanLine(y); + + x2 = basis_ox; + y2 = basis_oy + y * basis_yy; + + if (y2 >= max_y2) + break; + + int x = 0; + +// while ((x2 < 0 || (x2 >> 12) >= myIm->width()) && x < w) //fill the left of the target pixmap with the background color +// { +// *(scanline++) = background; //qRgb(0,0,255); +// x2 += basis_xx; +// x++; +// } + + int top = y2 >> 12; + int bottom = top + 1; + if (bottom >= myOrigHeight) + bottom--; + +// for (; x < w; x++) + for (; x < newWidth; x++) // ### myOrigWidth orig + { + int left = x2 >> 12; + int right = left + 1; + + if (right >= myOrigWidth) + right = myOrigWidth - 1; + + unsigned int wx = x2 & 0xfff; //12 bits of precision for reasons which will become clear + unsigned int wy = y2 & 0xfff; //12 bits of precision + + unsigned int iwx = 0xfff - wx; + unsigned int iwy = 0xfff - wy; + + QRgb tl = 0, tr = 0, bl = 0, br = 0; + int ind = 0; + ind = (left + top * myOrigWidth) * 3; + tl = (imdata[ind] << 16); + tl |= (imdata[ind + 1] << 8); + tl |= (imdata[ind + 2] << 0); + int bar = imdata[ind + 2] << 8; + bar = qBlue(bar); + + ind = (right + top * myOrigWidth) * 3; + tr = (imdata[ind] << 16); + tr |= (imdata[ind + 1] << 8); + tr |= (imdata[ind + 2] << 0); + bar = imdata[ind + 2] << 8; + + ind = (left + bottom * myOrigWidth) * 3; + bl = (imdata[ind] << 16); + bl |= (imdata[ind + 1] << 8); + bl |= (imdata[ind + 2] << 0); + bar = imdata[ind + 2] << 8; + + ind = (right + bottom * myOrigWidth) * 3; + br = (imdata[ind] << 16); + br |= (imdata[ind + 1] << 8); + br |= (imdata[ind + 2] << 0); +// tl=imdata[top][left]; +// tr=imdata[top][right]; +// bl=imdata[bottom][left]; +// br=imdata[bottom][right]; + + /* + tl=getValidPixel(myIm, left, top, x, y); //these calls are expensive + tr=getValidPixel(myIm, right, top, x, y); //use them to debug segfaults in this function + bl=getValidPixel(myIm, left, bottom, x, y); + br=getValidPixel(myIm, right, bottom, x, y); + */ + + unsigned int r = (unsigned int) (qRed(tl) * iwx * iwy + qRed(tr) * wx* iwy + qRed(bl) * iwx * wy + qRed(br) * wx * wy); // NB 12+12+8 == 32 + unsigned int g = (unsigned int) (qGreen(tl) * iwx * iwy + qGreen(tr) * wx * iwy + qGreen(bl) * iwx * wy + qGreen(br) * wx * wy); + unsigned int b = (unsigned int) (qBlue(tl) * iwx * iwy + qBlue(tr) * wx * iwy + qBlue(bl) * iwx * wy + qBlue(br) * wx * wy); + + // ### endianness + //we're actually off by one in 255 here! (254 instead of 255) + int foo = r >> 24; + foo = g >> 24; + foo = b >> 24; + newImageData[(y * newWidth * 3) + (x * 3) + 0] = (r >> 24); + newImageData[(y * newWidth * 3) + (x * 3) + 1] = (g >> 24); + newImageData[(y * newWidth * 3) + (x * 3) + 2] = (b >> 24); +// *(scanline++) = qRgb(r >> 24, g >> 24, b >> 24); //we're actually off by one in 255 here + + x2 += basis_xx; + + if (x2 > max_x2) + { + x++; + break; + } + + } + +// while (x < w) //fill the right of each scanline with the background colour +// { +// *(scanline++) = background; //qRgb(255,0,0); +// x++; +// } + } + +// for (;;) //fill the bottom of the target pixmap with the background color +// { +// y2 = basis_oy + y * basis_yy; +// +// if (y >= h) +// break; +// +// scanline = (QRgb*) dst.scanLine(y); +// for (int i = 0; i < w; i++) +// *(scanline++) = background; //qRgb(255,255,0); +// y++; +// } + + // ### keep orig image somewhere but delete all scaled images! + ImlibImage *newIm = Imlib_create_image_from_data( myId, newImageData, NULL, + newWidth, newHeight ); + delete[] newImageData; + + if ( newIm ) + { + myScaledIm = newIm; + myIsDirty = true; + myWidth = newWidth; + myHeight = newHeight; + } + + return myIm != 0L; +// return dst.copy(); +} +#endif + +#include "kuickimage.moc" diff --git a/kuickshow/src/kuickimage.h b/kuickshow/src/kuickimage.h new file mode 100644 index 0000000..745facf --- /dev/null +++ b/kuickshow/src/kuickimage.h @@ -0,0 +1,92 @@ +/**************************************************************************** +** $Id: .emacs,v 1.3 2002/02/20 15:06:53 gis Exp $ +** +** Created : 2002 +** +** Copyright (C) 2002 Carsten Pfeiffer <pfeiffer@kde.org> +** +****************************************************************************/ + +#ifndef KUICKIMAGE_H +#define KUICKIMAGE_H + +#include <qimage.h> +#include <qobject.h> + +#include <kurl.h> + +#include "kuickdata.h" +#include "kuickfile.h" + +// #include those AFTER Qt-includes! +#include <Imlib.h> +#include <X11/Xlib.h> +#include <X11/Xutil.h> +// #include <X11/extensions/shape.h> + + +class KuickImage : public QObject +{ + Q_OBJECT + +public: + enum ResizeMode { FAST, SMOOTH }; + + KuickImage( const KuickFile * file, ImlibImage *im, ImlibData *id ); + ~KuickImage(); + + int width() const { return myWidth; } + int height() const { return myHeight; } + int originalWidth() const { return myOrigWidth; } + int originalHeight() const { return myOrigHeight; } + + void resize( int width, int height, KuickImage::ResizeMode mode ); + void restoreOriginalSize(); + void rotate( Rotation rot ); + bool rotateAbs( Rotation rot ); + void flip( FlipMode flipMode ); + bool flipAbs( int mode ); + ImlibImage * imlibImage() const { return myIm; } + Pixmap& pixmap(); + void renderPixmap(); +// const QString& filename() const { return myFilename;} + const KuickFile& file() const { return *myFile; } + const KURL& url() const { return myFile->url(); } + + void setDirty( bool d ) { myIsDirty = d; } + bool isDirty() const { return myIsDirty; } + Rotation absRotation() const { return myRotation; } + FlipMode flipMode() const { return myFlipMode; } + + static ImlibImage * toImage( ImlibData *id, QImage& image ); + +private: + void fastResize( int newWidth, int newHeight ); + bool smoothResize( int width, int height ); + /** + * Note: caller must delete it! + */ + QImage * newQImage() const; + + const KuickFile * myFile; + + int myWidth; + int myHeight; + ImlibImage * myOrigIm; + ImlibImage * myIm; + ImlibData * myId; + Pixmap myPixmap; + bool myIsDirty; + + int myOrigWidth; + int myOrigHeight; + Rotation myRotation; + FlipMode myFlipMode; + +signals: + void startRendering(); + void stoppedRendering(); +}; + + +#endif // KUICKIMAGE_H diff --git a/kuickshow/src/kuickshow.cpp b/kuickshow/src/kuickshow.cpp new file mode 100644 index 0000000..7e8718f --- /dev/null +++ b/kuickshow/src/kuickshow.cpp @@ -0,0 +1,1443 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2006 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <stdio.h> +#include <assert.h> + +#include <qdir.h> +#include <qdesktopwidget.h> +#include <qdialog.h> +#include <qglobal.h> +#include <qkeycode.h> +#include <qlayout.h> +#include <qsize.h> +#include <qstring.h> + +#include <kaboutdata.h> +#include <kaccel.h> +#include <kaction.h> +#include <kapplication.h> +#include <kcmdlineargs.h> +#include <kconfig.h> +#include <kcursor.h> +#include <kdeversion.h> +#include <kfiledialog.h> +#include <kfilemetainfo.h> +#include <kglobal.h> +#include <khelpmenu.h> +#include <kiconloader.h> +#include <kio/netaccess.h> +#include <klocale.h> +#include <kmenubar.h> +#include <kmessagebox.h> +#include <kpopupmenu.h> +#include <kprotocolinfo.h> +#include <kpropertiesdialog.h> +#include <kprotocolinfo.h> +#include <kstatusbar.h> +#include <kstdaction.h> +#include <kstandarddirs.h> +#include <kstartupinfo.h> +#include <ktoolbar.h> +#include <kurlcombobox.h> +#include <kurlcompletion.h> +#include <kurldrag.h> +#include <kwin.h> +#include <kstdguiitem.h> + +#include <kdebug.h> + +#include "aboutwidget.h" +#include "filewidget.h" +#include "filecache.h" +#include "imdata.h" +#include "imagewindow.h" +#include "imlibwidget.h" +#include "kuick.h" +#include "kuickfile.h" + +#ifdef index +#undef index +#endif + +#include "kuickconfigdlg.h" +#include "kuickdata.h" +#include "kuickshow.h" +#include "version.h" + +#ifdef KeyPress +#undef KeyPress +#endif + +KuickData* kdata; + +static const int URL_ITEM = 0; +static const int META_ITEM = 1; + +QValueList<ImageWindow*> KuickShow::s_viewers; + +KuickShow::KuickShow( const char *name ) + : KMainWindow( 0L, name ), + m_slideshowCycle( 1 ), + fileWidget( 0L ), + dialog( 0L ), + id( 0L ), + m_viewer( 0L ), + oneWindowAction( 0L ), + m_accel( 0L ), + m_delayedRepeatItem( 0L ), + m_slideShowStopped(false) +{ + aboutWidget = 0L; + kdata = new KuickData; + kdata->load(); + + initImlib(); + resize( 400, 500 ); + + m_slideTimer = new QTimer( this ); + connect( m_slideTimer, SIGNAL( timeout() ), SLOT( nextSlide() )); + + + KConfig *kc = KGlobal::config(); + + bool isDir = false; // true if we get a directory on the commandline + + // parse commandline options + KCmdLineArgs *args = KCmdLineArgs::parsedArgs(); + + // files to display + // either a directory to display, an absolute path, a relative path, or a URL + KURL startDir; + startDir.setPath( QDir::currentDirPath() + '/' ); + + int numArgs = args->count(); + if ( numArgs >= 10 ) + { + // Even though the 1st i18n string will never be used, it needs to exist for plural handling - mhunter + if ( KMessageBox::warningYesNo( + this, + i18n("Do you really want to display this 1 image at the same time? This might be quite resource intensive and could overload your computer.<br>If you choose %1, only the first image will be shown.", + "Do you really want to display these %n images at the same time? This might be quite resource intensive and could overload your computer.<br>If you choose %1, only the first image will be shown.", numArgs).arg(KStdGuiItem::no().plainText()), + i18n("Display Multiple Images?")) + != KMessageBox::Yes ) + { + numArgs = 1; + } + } + + for ( int i = 0; i < numArgs; i++ ) { + KURL url = args->url( i ); + KFileItem item( KFileItem::Unknown, KFileItem::Unknown, url, false ); + + // for remote URLs, we don't know if it's a file or directory, but + // FileWidget::isImage() should correct in most cases. + // For non-local non-images, we just assume directory. + + if ( FileWidget::isImage( &item ) ) + { + showImage( &item, true, false, true ); // show in new window, not fullscreen-forced and move to 0,0 +// showImage( &item, true, false, false ); // show in new window, not fullscreen-forced and not moving to 0,0 + } + else if ( item.isDir() ) + { + startDir = url; + isDir = true; + } + + // need to check remote files + else if ( !url.isLocalFile() ) + { + KMimeType::Ptr mime = KMimeType::findByURL( url ); + QString name = mime->name(); + if ( name == "application/octet-stream" ) // unknown -> stat() + name = KIO::NetAccess::mimetype( url, this ); + + // text/* is a hack for bugs.kde.org-attached-images urls. + // The real problem here is that NetAccess::mimetype does a HTTP HEAD, which doesn't + // always return the right mimetype. The rest of KDE start a get() instead.... + if ( name.startsWith( "image/" ) || name.startsWith( "text/" ) ) + { + FileWidget::setImage( item, true ); + showImage( &item, true, false, true ); + } + else // assume directory, KDirLister will tell us if we can't list + { + startDir = url; + isDir = true; + } + } + // else // we don't handle local non-images + } + + if ( (kdata->startInLastDir && args->count() == 0) || args->isSet( "lastfolder" )) { + kc->setGroup( "SessionSettings"); + startDir = kc->readPathEntry( "CurrentDirectory", startDir.url() ); + } + + if ( s_viewers.isEmpty() || isDir ) { + initGUI( startDir ); + if (!kapp->isRestored()) // during session management, readProperties() will show() + show(); + } + + else { // don't show browser, when image on commandline + hide(); + KStartupInfo::appStarted(); + } +} + + +KuickShow::~KuickShow() +{ + saveSettings(); + + if ( m_viewer ) + m_viewer->close( true ); + + FileCache::shutdown(); + free( id ); + kapp->quit(); + + delete kdata; +} + +// TODO convert to use xmlui file +void KuickShow::initGUI( const KURL& startDir ) +{ + KURL startURL( startDir ); + if ( !KProtocolInfo::supportsListing( startURL ) ) + startURL = KURL(); + + fileWidget = new FileWidget( startURL, this, "MainWidget" ); + setFocusProxy( fileWidget ); + + KActionCollection *coll = fileWidget->actionCollection(); + + redirectDeleteAndTrashActions(coll); + + connect( fileWidget, SIGNAL( fileSelected( const KFileItem * ) ), + this, SLOT( slotSelected( const KFileItem * ) )); + + connect( fileWidget, SIGNAL( fileHighlighted( const KFileItem * )), + this, SLOT( slotHighlighted( const KFileItem * ) )); + + connect( fileWidget, SIGNAL( urlEntered( const KURL& )), + this, SLOT( dirSelected( const KURL& )) ); + + + fileWidget->setAcceptDrops(true); + connect( fileWidget, SIGNAL( dropped( const KFileItem *, QDropEvent *, const KURL::List & )), + this, SLOT( slotDropped( const KFileItem *, QDropEvent *, const KURL::List &)) ); + + // setup actions + KAction *open = KStdAction::open( this, SLOT( slotOpenURL() ), + coll, "openURL" ); + + KAction *print = KStdAction::print( this, SLOT( slotPrint() ), + coll, "kuick_print" ); + print->setText( i18n("Print Image...") ); + + KAction *configure = new KAction( i18n("Configure %1...").arg( KGlobal::instance()->aboutData()->programName() ), "configure", + KShortcut(), + this, SLOT( configuration() ), + coll, "kuick_configure" ); + KAction *slide = new KAction( i18n("Start Slideshow" ), "ksslide", + KShortcut( Key_F2 ), + this, SLOT( startSlideShow() ), + coll, "kuick_slideshow" ); + KAction *about = new KAction( i18n( "About KuickShow" ), "about", + KShortcut(), + this, SLOT( about() ), coll, "about" ); + + oneWindowAction = new KToggleAction( i18n("Open Only One Image Window"), + "window_new", + KShortcut( CTRL+Key_N ), coll, + "kuick_one window" ); + + m_toggleBrowserAction = new KToggleAction( i18n("Show File Browser"), KShortcut( Key_Space ), coll, "toggleBrowser" ); + m_toggleBrowserAction->setCheckedState(i18n("Hide File Browser")); + connect( m_toggleBrowserAction, SIGNAL( toggled( bool ) ), + SLOT( toggleBrowser() )); + + KAction *showInOther = new KAction( i18n("Show Image"), KShortcut(), + this, SLOT( slotShowInOtherWindow() ), + coll, "kuick_showInOtherWindow" ); + KAction *showInSame = new KAction( i18n("Show Image in Active Window"), + KShortcut(), + this, SLOT( slotShowInSameWindow() ), + coll, "kuick_showInSameWindow" ); + KAction *showFullscreen = new KAction( i18n("Show Image in Fullscreen Mode"), + KShortcut(), this, SLOT( slotShowFullscreen() ), + coll, "kuick_showFullscreen" ); + + KAction *quit = KStdAction::quit( this, SLOT(slotQuit()), coll, "quit"); + + // remove QString::null parameter -- ellis + coll->readShortcutSettings( QString::null ); + m_accel = coll->accel(); + + // menubar + KMenuBar *mBar = menuBar(); + QPopupMenu *fileMenu = new QPopupMenu( mBar, "file" ); + open->plug( fileMenu ); + showInOther->plug( fileMenu ); + showInSame->plug( fileMenu ); + showFullscreen->plug( fileMenu ); + fileMenu->insertSeparator(); + slide->plug( fileMenu ); + print->plug( fileMenu ); + fileMenu->insertSeparator(); + quit->plug( fileMenu ); + + QPopupMenu *editMenu = new QPopupMenu( mBar, "edit" ); + coll->action("mkdir")->plug( editMenu ); + coll->action("delete")->plug( editMenu ); + editMenu->insertSeparator(); + coll->action("properties")->plug( editMenu ); + + + // remove the Sorting submenu (and the separator below) + // from the main contextmenu + KActionMenu *sortingMenu = static_cast<KActionMenu*>( coll->action("sorting menu")); + KActionMenu *mainActionMenu = static_cast<KActionMenu*>( coll->action("popupMenu")); + QPopupMenu *mainPopup = mainActionMenu->popupMenu(); + int sortingIndex = mainPopup->indexOf( sortingMenu->itemId( 0 ) ); + int separatorId = mainPopup->idAt( sortingIndex + 1 ); + QMenuItem *separatorItem = mainPopup->findItem( separatorId ); + if ( separatorItem && separatorItem->isSeparator() ) + mainPopup->removeItem( separatorId ); + mainActionMenu->remove( sortingMenu ); + + // add the sorting menu and a separator into the View menu + KActionMenu *viewActionMenu = static_cast<KActionMenu*>( coll->action("view menu")); + viewActionMenu->popupMenu()->insertSeparator( 0 ); + sortingMenu->plug( viewActionMenu->popupMenu(), 0 ); // on top of the menu + + + QPopupMenu *settingsMenu = new QPopupMenu( mBar, "settings" ); + configure->plug( settingsMenu ); + + mBar->insertItem( i18n("&File"), fileMenu ); + mBar->insertItem( i18n("&Edit"), editMenu ); + viewActionMenu->plug( mBar ); + mBar->insertItem( i18n("&Settings"), settingsMenu ); + + // toolbar + KToolBar *tBar = toolBar(); + tBar->setText( i18n( "Main Toolbar" ) ); + + coll->action("up")->plug( tBar ); + coll->action("back")->plug( tBar ); + coll->action("forward")->plug( tBar ); + coll->action("home")->plug( tBar ); + coll->action("reload")->plug( tBar ); + + tBar->insertSeparator(); + + coll->action( "short view" )->plug( tBar ); + coll->action( "detailed view" )->plug( tBar ); + coll->action( "preview")->plug( tBar ); + + tBar->insertSeparator(); + configure->plug( tBar ); + slide->plug( tBar ); + tBar->insertSeparator(); + oneWindowAction->plug( tBar ); + print->plug( tBar ); + tBar->insertSeparator(); + about->plug( tBar ); + + QPopupMenu *help = helpMenu( QString::null, false ); + mBar->insertItem( KStdGuiItem::help().text() , help ); + + + KStatusBar* sBar = statusBar(); + sBar->insertItem( " ", URL_ITEM, 10 ); + sBar->insertItem( " ", META_ITEM, 2 ); + sBar->setItemAlignment(URL_ITEM, QLabel::AlignVCenter | QLabel::AlignLeft); + + fileWidget->setFocus(); + + KConfig *kc = KGlobal::config(); + kc->setGroup("SessionSettings"); + bool oneWindow = kc->readBoolEntry("OpenImagesInActiveWindow", true ); + oneWindowAction->setChecked( oneWindow ); + + tBar->show(); + + // Address box in address tool bar + KToolBar *addressToolBar = toolBar( "address_bar" ); + const int ID_ADDRESSBAR = 1; + + cmbPath = new KURLComboBox( KURLComboBox::Directories, + true, addressToolBar, "address_combo_box" ); + KURLCompletion *cmpl = new KURLCompletion( KURLCompletion::DirCompletion ); + cmbPath->setCompletionObject( cmpl ); + cmbPath->setAutoDeleteCompletionObject( true ); + + addressToolBar->insertWidget( ID_ADDRESSBAR, 1, cmbPath); + addressToolBar->setItemAutoSized( ID_ADDRESSBAR ); + + connect( cmbPath, SIGNAL( urlActivated( const KURL& )), + this, SLOT( slotSetURL( const KURL& ))); + connect( cmbPath, SIGNAL( returnPressed()), + this, SLOT( slotURLComboReturnPressed())); + + + fileWidget->initActions(); + fileWidget->clearHistory(); + dirSelected( fileWidget->url() ); + + setCentralWidget( fileWidget ); + setupGUI( KMainWindow::Save ); + + coll->action( "reload" )->setShortcut( KStdAccel::reload() ); + coll->action( "short view" )->setShortcut(Key_F6); + coll->action( "detailed view" )->setShortcut(Key_F7); + coll->action( "show hidden" )->setShortcut(Key_F8); + coll->action( "mkdir" )->setShortcut(Key_F10); + coll->action( "preview" )->setShortcut(Key_F11); + coll->action( "separate dirs" )->setShortcut(Key_F12); +} + +void KuickShow::redirectDeleteAndTrashActions(KActionCollection *coll) +{ + KAction *action = coll->action("delete"); + if (action) + { + action->disconnect(fileWidget); + connect(action, SIGNAL(activated()), this, SLOT(slotDeleteCurrentImage())); + } + + action = coll->action("trash"); + if (action) + { + action->disconnect(fileWidget); + connect(action, SIGNAL(activated()), this, SLOT(slotTrashCurrentImage())); + } +} + +void KuickShow::slotSetURL( const KURL& url ) +{ + fileWidget->setURL( url, true ); +} + +void KuickShow::slotURLComboReturnPressed() +{ + KURL where = KURL::fromPathOrURL( cmbPath->currentText() ); + slotSetURL( where ); +} + +void KuickShow::viewerDeleted() +{ + ImageWindow *viewer = (ImageWindow*) sender(); + s_viewers.remove( viewer ); + if ( viewer == m_viewer ) + m_viewer = 0L; + + if ( !haveBrowser() && s_viewers.isEmpty() ) { + saveSettings(); + FileCache::shutdown(); + ::exit(0); + } + + else if ( haveBrowser() ) { + setActiveWindow(); + // This setFocus() call causes problems in the combiview (always the + // directory view on the left gets the focus, which is not desired) + // fileWidget->setFocus(); + } + + if ( fileWidget ) + // maybe a slideshow was stopped --> enable the action again + fileWidget->actionCollection()->action("kuick_slideshow")->setEnabled( true ); + + m_slideTimer->stop(); +} + + +void KuickShow::slotHighlighted( const KFileItem *fi ) +{ + KFileItem *item = const_cast<KFileItem *>( fi ); + statusBar()->changeItem( item->getStatusBarInfo(), URL_ITEM ); + bool image = FileWidget::isImage( fi ); + + QString meta; + if ( image ) + { + KFileMetaInfo info = item->metaInfo(); + if ( info.isValid() ) + { + meta = info.item( KFileMimeTypeInfo::Size ).string(); + KFileMetaInfoGroup group = info.group( "Technical" ); + if ( group.isValid() ) + { + QString bpp = group.item( "BitDepth" ).string(); + if ( !bpp.isEmpty() ) + meta.append( ", " ).append( bpp ); + } + } + } + statusBar()->changeItem( meta, META_ITEM ); + + fileWidget->actionCollection()->action("kuick_print")->setEnabled( image ); + fileWidget->actionCollection()->action("kuick_showInSameWindow")->setEnabled( image ); + fileWidget->actionCollection()->action("kuick_showInOtherWindow")->setEnabled( image ); + fileWidget->actionCollection()->action("kuick_showFullscreen")->setEnabled( image ); +} + +void KuickShow::dirSelected( const KURL& url ) +{ + if ( url.isLocalFile() ) + setCaption( url.path() ); + else + setCaption( url.prettyURL() ); + + cmbPath->setURL( url ); + statusBar()->changeItem( url.prettyURL(), URL_ITEM ); +} + +void KuickShow::slotSelected( const KFileItem *item ) +{ + showImage( item, !oneWindowAction->isChecked() ); +} + +// downloads item if necessary +void KuickShow::showFileItem( ImageWindow * /*view*/, + const KFileItem * /*item*/ ) +{ + +} + +bool KuickShow::showImage( const KFileItem *fi, + bool newWindow, bool fullscreen, bool moveToTopLeft ) +{ + newWindow |= !m_viewer; + fullscreen |= (newWindow && kdata->fullScreen); + if ( FileWidget::isImage( fi ) ) { + + if ( newWindow ) { + m_viewer = new ImageWindow( kdata->idata, id, 0L, "image window" ); + m_viewer->setFullscreen( fullscreen ); + s_viewers.append( m_viewer ); + + connect( m_viewer, SIGNAL( destroyed() ), SLOT( viewerDeleted() )); + connect( m_viewer, SIGNAL( sigFocusWindow( ImageWindow *) ), + this, SLOT( slotSetActiveViewer( ImageWindow * ) )); + connect( m_viewer, SIGNAL( sigImageError(const KuickFile *, const QString& ) ), + this, SLOT( messageCantLoadImage(const KuickFile *, const QString &) )); + connect( m_viewer, SIGNAL( requestImage( ImageWindow *, int )), + this, SLOT( slotAdvanceImage( ImageWindow *, int ))); + connect( m_viewer, SIGNAL( pauseSlideShowSignal() ), + this, SLOT( pauseSlideShow() ) ); + connect( m_viewer, SIGNAL (deleteImage (ImageWindow *)), + this, SLOT (slotDeleteCurrentImage (ImageWindow *))); + connect( m_viewer, SIGNAL (trashImage (ImageWindow *)), + this, SLOT (slotTrashCurrentImage (ImageWindow *))); + if ( s_viewers.count() == 1 && moveToTopLeft ) { + // we have to move to 0x0 before showing _and_ + // after showing, otherwise we get some bogus geometry() + m_viewer->move( Kuick::workArea().topLeft() ); + } + + m_viewer->installEventFilter( this ); + } + + // for some strange reason, m_viewer sometimes changes during the + // next few lines of code, so as a workaround, we use safeViewer here. + // This happens when calling KuickShow with two or more remote-url + // arguments on the commandline, where the first one is loaded properly + // and the second isn't (e.g. because it is a pdf or something else, + // Imlib can't load). + ImageWindow *safeViewer = m_viewer; + +// file->waitForDownload( this ); +// QString filename; +// KIO::NetAccess::download(fi->url(), filename, this); + + if ( !safeViewer->showNextImage( fi->url() ) ) { + m_viewer = safeViewer; + safeViewer->close( true ); // couldn't load image, close window + } + else { +// safeViewer->setFullscreen( fullscreen ); + + if ( newWindow ) { +// safeViewer->show(); + + if ( !fullscreen && s_viewers.count() == 1 && moveToTopLeft ) { + // the WM might have moved us after showing -> strike back! + // move the first image to 0x0 workarea coord + safeViewer->move( Kuick::workArea().topLeft() ); + } + } + + if ( kdata->preloadImage && fileWidget ) { + KFileItem *item = 0L; // don't move cursor + item = fileWidget->getItem( FileWidget::Next, true ); + if ( item ) + safeViewer->cacheImage( item->url() ); + } + + m_viewer = safeViewer; + return true; + } // m_viewer created successfully + } // isImage + + return false; +} + +void KuickShow::slotDeleteCurrentImage() +{ + performDeleteCurrentImage(fileWidget); +} + +void KuickShow::slotTrashCurrentImage() +{ + performTrashCurrentImage(fileWidget); +} + +void KuickShow::slotDeleteCurrentImage(ImageWindow *viewer) +{ + if (!fileWidget) { + delayAction(new DelayedRepeatEvent(viewer, DelayedRepeatEvent::DeleteCurrentFile, 0L)); + return; + } + performDeleteCurrentImage(viewer); +} + +void KuickShow::slotTrashCurrentImage(ImageWindow *viewer) +{ + if (!fileWidget) { + delayAction(new DelayedRepeatEvent(viewer, DelayedRepeatEvent::TrashCurrentFile, 0L)); + return; + } + performTrashCurrentImage(viewer); +} + +void KuickShow::performDeleteCurrentImage(QWidget *parent) +{ + assert(fileWidget != 0L); + + KFileItemList list; + KFileItem *item = fileWidget->getCurrentItem(false); + list.append (item); + + if (KMessageBox::warningContinueCancel( + parent, + i18n("<qt>Do you really want to delete\n <b>'%1'</b>?</qt>").arg(item->url().pathOrURL()), + i18n("Delete File"), + KStdGuiItem::del(), + "Kuick_delete_current_image") + != KMessageBox::Continue) + { + return; + } + + tryShowNextImage(); + fileWidget->del(list, false, false); +} + +void KuickShow::performTrashCurrentImage(QWidget *parent) +{ + assert(fileWidget != 0L); + + KFileItemList list; + KFileItem *item = fileWidget->getCurrentItem(false); + if (!item) return; + + list.append (item); + + if (KMessageBox::warningContinueCancel( + parent, + i18n("<qt>Do you really want to trash\n <b>'%1'</b>?</qt>").arg(item->url().pathOrURL()), + i18n("Trash File"), + KGuiItem(i18n("to trash", "&Trash"),"edittrash"), + "Kuick_trash_current_image") + != KMessageBox::Continue) + { + return; + } + + tryShowNextImage(); + fileWidget->trash(list, parent, false, false); +} + +void KuickShow::tryShowNextImage() +{ + // move to next file item even if we have no viewer + KFileItem *next = fileWidget->getNext(true); + if (!next) + next = fileWidget->getPrevious(true); + + // ### why is this necessary at all? Why does KDirOperator suddenly re-read the + // entire directory after a file was deleted/trashed!? (KDirNotify is the reason) + if (!m_viewer) + return; + + if (next) + showImage(next, false); + else + { + if (!haveBrowser()) + { + // ### when simply calling toggleBrowser(), this main window is completely messed up + QTimer::singleShot(0, this, SLOT(toggleBrowser())); + } + m_viewer->deleteLater(); + } +} + +void KuickShow::startSlideShow() +{ + KFileItem *item = kdata->slideshowStartAtFirst ? + fileWidget->gotoFirstImage() : + fileWidget->getCurrentItem(false); + + if ( item ) { + m_slideshowCycle = 1; + fileWidget->actionCollection()->action("kuick_slideshow")->setEnabled( false ); + showImage( item, !oneWindowAction->isChecked(), + kdata->slideshowFullscreen ); + if(kdata->slideDelay) + m_slideTimer->start( kdata->slideDelay ); + } +} + +void KuickShow::pauseSlideShow() +{ + if(m_slideShowStopped) { + if(kdata->slideDelay) + m_slideTimer->start( kdata->slideDelay ); + m_slideShowStopped = false; + } + else { + m_slideTimer->stop(); + m_slideShowStopped = true; + } +} + +void KuickShow::nextSlide() +{ + if ( !m_viewer ) { + m_slideshowCycle = 1; + fileWidget->actionCollection()->action("kuick_slideshow")->setEnabled( true ); + return; + } + + KFileItem *item = fileWidget->getNext( true ); + if ( !item ) { // last image + if ( m_slideshowCycle < kdata->slideshowCycles + || kdata->slideshowCycles == 0 ) { + item = fileWidget->gotoFirstImage(); + if ( item ) { + nextSlide( item ); + m_slideshowCycle++; + return; + } + } + + m_viewer->close( true ); + fileWidget->actionCollection()->action("kuick_slideshow")->setEnabled( true ); + return; + } + + nextSlide( item ); +} + +void KuickShow::nextSlide( KFileItem *item ) +{ + m_viewer->showNextImage( item->url() ); + if(kdata->slideDelay) + m_slideTimer->start( kdata->slideDelay ); +} + + +// prints the selected files in the filebrowser +void KuickShow::slotPrint() +{ + const KFileItemList *items = fileWidget->selectedItems(); + if ( !items ) + return; + + KFileItemListIterator it( *items ); + + // don't show the image, just print + ImageWindow *iw = new ImageWindow( 0, id, this, "printing image" ); + KFileItem *item; + while ( (item = it.current()) ) { + if (FileWidget::isImage( item ) && iw->loadImage( item->url() )) + iw->printImage(); + ++it; + } + + iw->close( true ); +} + +void KuickShow::slotShowInOtherWindow() +{ + showImage( fileWidget->getCurrentItem( false ), true ); +} + +void KuickShow::slotShowInSameWindow() +{ + showImage( fileWidget->getCurrentItem( false ), false ); +} + +void KuickShow::slotShowFullscreen() +{ + showImage( fileWidget->getCurrentItem( false ), false, true ); +} + +void KuickShow::slotDropped( const KFileItem *, QDropEvent *, const KURL::List &urls) +{ + KURL::List::ConstIterator it = urls.begin(); + for ( ; it != urls.end(); ++it ) + { + KFileItem item( KFileItem::Unknown, KFileItem::Unknown, *it ); + if ( FileWidget::isImage( &item ) ) + showImage( &item, true ); + else + fileWidget->setURL( *it, true ); + } +} + +// try to init the WM border as it is 0,0 when the window is not shown yet. +void KuickShow::show() +{ + KMainWindow::show(); + (void) Kuick::frameSize( winId() ); +} + +void KuickShow::slotAdvanceImage( ImageWindow *view, int steps ) +{ + KFileItem *item = 0L; // to be shown + KFileItem *item_next = 0L; // to be cached + + if ( steps == 0 ) + return; + + // the viewer might not be available yet. Factor this out somewhen. + if ( !fileWidget ) { + if ( m_delayedRepeatItem ) + return; + + delayAction(new DelayedRepeatEvent( view, DelayedRepeatEvent::AdvanceViewer, new int(steps) )); + return; + } + + if ( steps > 0 ) { + for ( int i = 0; i < steps; i++ ) + item = fileWidget->getNext( true ); + item_next = fileWidget->getNext( false ); + } + + else if ( steps < 0 ) { + for ( int i = steps; i < 0; i++ ) + item = fileWidget->getPrevious( true ); + item_next = fileWidget->getPrevious( false ); + } + + if ( FileWidget::isImage( item ) ) { +// QString filename; +// KIO::NetAccess::download(item->url(), filename, this); + view->showNextImage( item->url() ); + if (m_slideTimer->isActive() && kdata->slideDelay) + m_slideTimer->start( kdata->slideDelay ); + + if ( kdata->preloadImage && item_next ) { // preload next image + if ( FileWidget::isImage( item_next ) ) + view->cacheImage( item_next->url() ); + } + + } +} + +bool KuickShow::eventFilter( QObject *o, QEvent *e ) +{ + if ( m_delayedRepeatItem ) // we probably need to install an eventFilter over + { + return true; // kapp, to make it really safe + } + + bool ret = false; + int eventType = e->type(); + QKeyEvent *k = 0L; + if ( eventType == QEvent::KeyPress ) + k = static_cast<QKeyEvent *>( e ); + + if ( k ) { + if ( KStdAccel::quit().contains( KKey( k ) ) ) { + saveSettings(); + deleteAllViewers(); + FileCache::shutdown(); + ::exit(0); + } + else if ( KStdAccel::help().contains( KKey( k ) ) ) { + appHelpActivated(); + return true; + } + } + + + ImageWindow *window = dynamic_cast<ImageWindow*>( o ); + + if ( window ) { + // The XWindow used to display Imlib's image is being resized when + // switching images, causing enter- and leaveevents for this + // ImageWindow, leading to the cursor being unhidden. So we simply + // don't pass those events to KCursor to prevent that. + if ( eventType != QEvent::Leave && eventType != QEvent::Enter ) + KCursor::autoHideEventFilter( o, e ); + + m_viewer = window; + QString img; + KFileItem *item = 0L; // the image to be shown + KFileItem *item_next = 0L; // the image to be cached + + if ( k ) { // keypress + ret = true; + int key = k->key(); + + // Key_Shift shouldn't load the browser in nobrowser mode, it + // is used for zooming in the imagewindow + // Key_Alt shouldn't either - otherwise Alt+F4 doesn't work, the + // F4 gets eaten (by NetAccess' modal dialog maybe?) + + if ( !fileWidget ) + { + if ( key != Key_Escape && key != Key_Shift && key != Key_Alt ) + { + KuickFile *file = m_viewer->currentFile(); +// QFileInfo fi( m_viewer->filename() ); +// start.setPath( fi.dirPath( true ) ); + initGUI( file->url().upURL() ); + + // the fileBrowser will list the start-directory + // asynchronously so we can't immediately continue. There + // is no current-item and no next-item (actually no item + // at all). So we tell the browser the initial + // current-item and wait for it to tell us when it's ready. + // Then we will replay this KeyEvent. + delayedRepeatEvent( m_viewer, k ); + + // OK, once again, we have a problem with the now async and + // sync KDirLister :( If the startDir is already cached by + // KDirLister, we won't ever get that finished() signal + // because it is emitted before we can connect(). So if + // our dirlister has a rootFileItem, we assume the + // directory is read already and simply call + // slotReplayEvent() without the need for the finished() + // signal. + + // see slotAdvanceImage() for similar code + if ( fileWidget->dirLister()->isFinished() ) + { + if ( fileWidget->dirLister()->rootItem() ) + { + fileWidget->setCurrentItem( file->url().fileName() ); + QTimer::singleShot( 0, this, SLOT( slotReplayEvent())); + } + else // finished, but no root-item -- probably an error, kill repeat-item! + { + abortDelayedEvent(); + } + } + else // not finished yet + { + fileWidget->setInitialItem( file->url().fileName() ); + connect( fileWidget, SIGNAL( finished() ), + SLOT( slotReplayEvent() )); + } + + return true; + } + + return KMainWindow::eventFilter( o, e ); + } + + // we definitely have a fileWidget here! + + KKey kkey( k ); + if ( key == Key_Home || KStdAccel::home().contains( kkey ) ) + { + item = fileWidget->gotoFirstImage(); + item_next = fileWidget->getNext( false ); + } + + else if ( key == Key_End || KStdAccel::end().contains( kkey ) ) + { + item = fileWidget->gotoLastImage(); + item_next = fileWidget->getPrevious( false ); + } + + else if ( fileWidget->actionCollection()->action("delete")->shortcut().contains( key )) + { + kdDebug() << "WOW, deletion happens here!" << endl; +// KFileItem *cur = fileWidget->getCurrentItem( false ); + (void) fileWidget->getCurrentItem( false ); + item = fileWidget->getNext( false ); // don't move + if ( !item ) + item = fileWidget->getPrevious( false ); + KFileItem it( KFileItem::Unknown, KFileItem::Unknown, + m_viewer->url() ); + KFileItemList list; + list.append( &it ); + if ( fileWidget->del(list, window, + (k->state() & ShiftButton) == 0) == 0L ) + return true; // aborted deletion + + // ### check failure asynchronously and restore old item? + fileWidget->setCurrentItem( item ); + } + + else if ( m_toggleBrowserAction->shortcut().contains( key ) ) + { + toggleBrowser(); + return true; // don't pass keyEvent + } + + else + ret = false; + + + if ( FileWidget::isImage( item ) ) { +// QString filename; +// KIO::NetAccess::download(item->url(), filename, this); + m_viewer->showNextImage( item->url() ); + + if ( kdata->preloadImage && item_next ) { // preload next image + if ( FileWidget::isImage( item_next ) ) + m_viewer->cacheImage( item_next->url() ); + } + + ret = true; // don't pass keyEvent + } + } // keyPressEvent on ImageWindow + + + // doubleclick closes image window + // and shows browser when last window closed via doubleclick + else if ( eventType == QEvent::MouseButtonDblClick ) + { + QMouseEvent *ev = static_cast<QMouseEvent*>( e ); + if ( ev->button() == LeftButton ) + { + if ( s_viewers.count() == 1 ) + { + if ( !fileWidget ) + { +// KURL start; +// QFileInfo fi( window->filename() ); +// start.setPath( fi.dirPath( true ) ); + initGUI( window->currentFile()->url().fileName() ); + } + show(); + raise(); + } + + window->close( true ); + + ev->accept(); + ret = true; + } + } + + } // isA ImageWindow + + + if ( ret ) + return true; + + return KMainWindow::eventFilter( o, e ); +} + +void KuickShow::configuration() +{ + if ( !m_accel ) { + KURL start; + start.setPath( QDir::homeDirPath() ); + initGUI( KURL::fromPathOrURL( QDir::homeDirPath() ) ); + } + + dialog = new KuickConfigDialog( fileWidget->actionCollection(), 0L, + "dialog", false ); + dialog->resize( 540, 510 ); + dialog->setIcon( kapp->miniIcon() ); + + connect( dialog, SIGNAL( okClicked() ), + this, SLOT( slotConfigApplied() ) ); + connect( dialog, SIGNAL( applyClicked() ), + this, SLOT( slotConfigApplied() ) ); + connect( dialog, SIGNAL( finished() ), + this, SLOT( slotConfigClosed() ) ); + + fileWidget->actionCollection()->action( "kuick_configure" )->setEnabled( false ); + dialog->show(); +} + + +void KuickShow::slotConfigApplied() +{ + dialog->applyConfig(); + + initImlib(); + kdata->save(); + + ImageWindow *viewer; + QValueListIterator<ImageWindow*> it = s_viewers.begin(); + while ( it != s_viewers.end() ) { + viewer = *it; + viewer->updateActions(); + ++it; + } + + fileWidget->reloadConfiguration(); +} + + +void KuickShow::slotConfigClosed() +{ + dialog->delayedDestruct(); + fileWidget->actionCollection()->action( "kuick_configure" )->setEnabled( true ); +} + +void KuickShow::about() +{ + if ( !aboutWidget ) + aboutWidget = new AboutWidget( 0L, "about" ); + + aboutWidget->adjustSize(); + +#if KDE_VERSION >= 310 + KDialog::centerOnScreen( aboutWidget ); +#else +// Not fixed because it must be dead code now. + QDesktopWidget *desktop = QApplication::desktop(); + int screen = desktop->screenNumber( aboutWidget ); + if ( screen == -1 ) + screen = desktop->primaryScreen(); + + QRect r = desktop->screenGeometry( screen ); + aboutWidget->move( r.center().x() - aboutWidget->width()/2, + r.center().y() - aboutWidget->height()/2 ); +#endif + + aboutWidget->show(); +} + +// ------ sessionmanagement - load / save current directory ----- +void KuickShow::readProperties( KConfig *kc ) +{ + assert( fileWidget ); // from SM, we should always have initGUI on startup + QString dir = kc->readPathEntry( "CurrentDirectory" ); + if ( !dir.isEmpty() ) { + fileWidget->setURL( KURL::fromPathOrURL( dir ), true ); + fileWidget->clearHistory(); + } + + const KURL& listedURL = fileWidget->url(); + QStringList images = kc->readPathListEntry( "Images shown" ); + QStringList::Iterator it; + bool hasCurrentURL = false; + + for ( it = images.begin(); it != images.end(); ++it ) { + KFileItem item( KFileItem::Unknown, KFileItem::Unknown, KURL::fromPathOrURL( *it ), false ); + if ( item.isReadable() ) + if ( showImage( &item, true ) ) { + // Set the current URL in the file widget, if possible + if ( !hasCurrentURL && listedURL.isParentOf( item.url() )) + fileWidget->setInitialItem( item.url().fileName() ); + hasCurrentURL = true; + } + } + + bool visible = kc->readBoolEntry( "Browser visible", false ); + if ( visible || s_viewers.isEmpty() ) + show(); +} + +void KuickShow::saveProperties( KConfig *kc ) +{ + kc->writeEntry( "Browser visible", fileWidget && fileWidget->isVisible() ); + if (fileWidget) + kc->writePathEntry( "CurrentDirectory", fileWidget->url().url() ); + + QStringList urls; + QValueListIterator<ImageWindow*> it; + for ( it = s_viewers.begin(); it != s_viewers.end(); ++it ) + { + const KURL& url = (*it)->currentFile()->url(); + if ( url.isLocalFile() ) + urls.append( url.path() ); + else + urls.append( url.prettyURL() ); // ### check if writePathEntry( prettyURL ) works! + } + + kc->writePathEntry( "Images shown", urls ); +} + +// -------------------------------------------------------------- + +void KuickShow::saveSettings() +{ + KConfig *kc = KGlobal::config(); + + kc->setGroup("SessionSettings"); + if ( oneWindowAction ) + kc->writeEntry( "OpenImagesInActiveWindow", oneWindowAction->isChecked() ); + + if ( fileWidget ) { + kc->writePathEntry( "CurrentDirectory", fileWidget->url().prettyURL() ); // ### was url().url() + fileWidget->writeConfig( kc, "Filebrowser" ); + } + + kc->sync(); +} + + +void KuickShow::messageCantLoadImage( const KuickFile *, const QString& message ) +{ + m_viewer->clearFocus(); + KMessageBox::information( m_viewer, message, i18n("Error"), "kuick_cant_load_image" ); +} + +void KuickShow::initImlib() +{ + ImData *idata = kdata->idata; + ImlibInitParams par; + initImlibParams( idata, &par ); + + id = Imlib_init_with_params( x11Display(), &par ); + if ( !id ) { + initImlibParams( idata, &par ); + + qWarning("*** KuickShow: Whoops, can't initialize imlib, trying my own palettefile now."); + QString paletteFile = locate( "data", "kuickshow/im_palette.pal" ); + // ### - does the qstrdup() cure the segfault in imlib eventually? + char *file = qstrdup( paletteFile.local8Bit() ); + par.palettefile = file; + par.flags |= PARAMS_PALETTEFILE; + + qWarning("Palettefile: %s", par.palettefile ); + + id = Imlib_init_with_params( x11Display(), &par ); + + if ( !id ) { + QString tmp = i18n("Unable to initialize \"Imlib\".\n" + "Start kuickshow from the command line " + "and look for error messages.\n" + "The program will now quit."); + KMessageBox::error( this, tmp, i18n("Fatal Imlib Error") ); + + FileCache::shutdown(); + ::exit(1); + } + } +} + + +void KuickShow::initImlibParams( ImData *idata, ImlibInitParams *par ) +{ + par->flags = ( PARAMS_REMAP | PARAMS_VISUALID | PARAMS_SHAREDMEM | PARAMS_SHAREDPIXMAPS | + PARAMS_FASTRENDER | PARAMS_HIQUALITY | PARAMS_DITHER | + PARAMS_IMAGECACHESIZE | PARAMS_PIXMAPCACHESIZE ); + + Visual* defaultvis = DefaultVisual(x11Display(), x11Screen()); + + par->paletteoverride = idata->ownPalette ? 1 : 0; + par->remap = idata->fastRemap ? 1 : 0; + par->fastrender = idata->fastRender ? 1 : 0; + par->hiquality = idata->dither16bit ? 1 : 0; + par->dither = idata->dither8bit ? 1 : 0; + par->sharedmem = 1; + par->sharedpixmaps = 1; + par->visualid = defaultvis->visualid; + uint maxcache = idata->maxCache; + + // 0 == no cache + par->imagecachesize = maxcache * 1024; + par->pixmapcachesize = maxcache * 1024; +} + +bool KuickShow::haveBrowser() const +{ + return fileWidget && fileWidget->isVisible(); +} + +void KuickShow::delayedRepeatEvent( ImageWindow *w, QKeyEvent *e ) +{ + m_delayedRepeatItem = new DelayedRepeatEvent( w, new QKeyEvent( *e ) ); +} + +void KuickShow::abortDelayedEvent() +{ + delete m_delayedRepeatItem; + m_delayedRepeatItem = 0L; +} + +void KuickShow::slotReplayEvent() +{ + disconnect( fileWidget, SIGNAL( finished() ), + this, SLOT( slotReplayEvent() )); + + DelayedRepeatEvent *e = m_delayedRepeatItem; + m_delayedRepeatItem = 0L; // otherwise, eventFilter aborts + + eventFilter( e->viewer, e->event ); + delete e; + + // ### WORKAROUND for QIconView bug in Qt <= 3.0.3 at least + if ( fileWidget && fileWidget->view() ) { + QWidget *widget = fileWidget->view()->widget(); + if ( widget->inherits( "QIconView" ) || widget->child(0, "QIconView" ) ){ + fileWidget->setSorting( fileWidget->sorting() ); + } + } + // -------------------------------------------------------------- +} + +void KuickShow::replayAdvance(DelayedRepeatEvent *event) +{ + // ### WORKAROUND for QIconView bug in Qt <= 3.0.3 at least + // Sigh. According to qt-bugs, they won't fix this bug ever. So you can't + // rely on sorting to be correct before the QIconView has been show()n. + if ( fileWidget && fileWidget->view() ) { + QWidget *widget = fileWidget->view()->widget(); + if ( widget->inherits( "QIconView" ) || widget->child(0, "QIconView" ) ){ + fileWidget->setSorting( fileWidget->sorting() ); + } + } + // -------------------------------------------------------------- + + slotAdvanceImage( event->viewer, *(int *) (event->data) ); +} + +void KuickShow::delayAction(DelayedRepeatEvent *event) +{ + if (m_delayedRepeatItem) + return; + + m_delayedRepeatItem = event; + + KURL url = event->viewer->currentFile()->url(); +// QFileInfo fi( event->viewer->filename() ); +// start.setPath( fi.dirPath( true ) ); + initGUI( url.upURL() ); + + // see eventFilter() for explanation and similar code + if ( fileWidget->dirLister()->isFinished() && + fileWidget->dirLister()->rootItem() ) + { + fileWidget->setCurrentItem( url.fileName() ); + QTimer::singleShot( 0, this, SLOT( doReplay())); + } + else + { + fileWidget->setInitialItem( url.fileName() ); + connect( fileWidget, SIGNAL( finished() ), + SLOT( doReplay() )); + } +} + +void KuickShow::doReplay() +{ + if (!m_delayedRepeatItem) + return; + + disconnect( fileWidget, SIGNAL( finished() ), + this, SLOT( doReplay() )); + + switch (m_delayedRepeatItem->action) + { + case DelayedRepeatEvent::DeleteCurrentFile: + performDeleteCurrentImage((QWidget *) m_delayedRepeatItem->data); + break; + case DelayedRepeatEvent::TrashCurrentFile: + performTrashCurrentImage((QWidget *) m_delayedRepeatItem->data); + break; + case DelayedRepeatEvent::AdvanceViewer: + replayAdvance(m_delayedRepeatItem); + break; + default: + kdWarning() << "doReplay: unknown action -- ignoring: " << m_delayedRepeatItem->action << endl; + break; + } + + delete m_delayedRepeatItem; + m_delayedRepeatItem = 0L; +} + +void KuickShow::toggleBrowser() +{ + if ( !haveBrowser() ) { + if ( m_viewer && m_viewer->isFullscreen() ) + m_viewer->setFullscreen( false ); + fileWidget->resize( size() ); // ### somehow fileWidget isn't resized!? + show(); + raise(); + KWin::activateWindow( winId() ); // ### this should not be necessary +// setFocus(); + } + else if ( !s_viewers.isEmpty() ) + hide(); +} + +void KuickShow::slotOpenURL() +{ + KFileDialog dlg(QString::null, kdata->fileFilter, this, "filedialog", true); + dlg.setMode( KFile::Files | KFile::Directory ); + dlg.setCaption( i18n("Select Files or Folder to Open") ); + + if ( dlg.exec() == QDialog::Accepted ) + { + KURL::List urls = dlg.selectedURLs(); + KURL::List::ConstIterator it = urls.begin(); + for ( ; it != urls.end(); ++it ) + { + KFileItem item( KFileItem::Unknown, KFileItem::Unknown, *it ); + if ( FileWidget::isImage( &item ) ) + showImage( &item, true ); + else + fileWidget->setURL( *it, true ); + } + } +} + +void KuickShow::deleteAllViewers() +{ + QValueListIterator<ImageWindow*> it = s_viewers.begin(); + for ( ; it != s_viewers.end(); ++it ) { + (*it)->disconnect( SIGNAL( destroyed() ), this, SLOT( viewerDeleted() )); + (*it)->close( true ); + } + + s_viewers.clear(); + m_viewer = 0L; +} + +KActionCollection * KuickShow::actionCollection() const +{ + if ( fileWidget ) + return fileWidget->actionCollection(); + + return KMainWindow::actionCollection(); +} + +#include "kuickshow.moc" diff --git a/kuickshow/src/kuickshow.desktop b/kuickshow/src/kuickshow.desktop new file mode 100644 index 0000000..786cd0f --- /dev/null +++ b/kuickshow/src/kuickshow.desktop @@ -0,0 +1,93 @@ +[Desktop Entry] +Encoding=UTF-8 +Name=Kuickshow +Name[af]=Vinnig-vertoon +Name[ar]=عرض سريع +Name[eo]=Rapidmontrilo +Name[fr]=KuickShow +Name[hi]=क्विक-शो +Name[it]=KuickShow +Name[ko]=K퀵쇼 +Name[ne]=क्विकशो +Name[pt_BR]=KRápida Exibição +Name[ta]=விரைவுகாட்சி +Name[th]=ดูภาพด่วน - K +Name[ven]=Musumbedzo wa kuick +Name[zh_TW]=Kuickshow 快秀 +Name[zu]=I Kuickshow +Exec=kuickshow %i %m -caption "%c" %U +Icon=kuickshow +Type=Application +MimeType=image/gif;image/x-xpm;image/x-xbm;image/jpeg;image/png;image/tiff;image/x-bmp;image/x-psd;image/x-eim;image/x-portable-bitmap;image/x-portable-pixmap;image/x-portable-greymap; +DocPath=kuickshow/index.html +Terminal=false +InitialPreference=6 + +GenericName=Image Viewer +GenericName[af]=Beeld Aansig +GenericName[ar]=عارض صور +GenericName[bg]=Преглед на изображения +GenericName[br]=Gweler ar skeudennoù +GenericName[bs]=Preglednik slika +GenericName[ca]=Visualitzador d'imatges +GenericName[cs]=Prohlížeč obrázků +GenericName[cy]=Gwelydd Delweddau +GenericName[da]=Billedfremviser +GenericName[de]=Bildbetrachter +GenericName[el]=Προβολέας εικόνων +GenericName[eo]=Bildorigardilo +GenericName[es]=Visor de imágenes +GenericName[et]=Pildifailide näitaja +GenericName[eu]=Irudi ikustailua +GenericName[fa]=مشاهدهگر تصویر +GenericName[fi]=Kuvannäytin +GenericName[fr]=Afficheur d'images +GenericName[ga]=Amharcán Íomhánna +GenericName[gl]=Visor de imaxes +GenericName[he]=מציג תמונות +GenericName[hi]=छवि प्रदर्शक +GenericName[hr]=Preglednik slika +GenericName[hu]=Képnézegető +GenericName[is]=Myndaskoðari +GenericName[it]=Visore di immagini +GenericName[ja]=画像ビューア +GenericName[kk]=Кескіндерді қарау +GenericName[km]=កម្មវិធីមើលរូបភាព +GenericName[lt]=Paveikslėlių žiūriklis +GenericName[lv]=Attēlu Skatītājs +GenericName[ms]=Paparan Imej +GenericName[mt]=Werrej tal-istampi +GenericName[nb]=Bildefremviser +GenericName[nds]=Bildkieker +GenericName[ne]=छवि दर्शक +GenericName[nl]=Afbeeldingenweergaveprogramma +GenericName[nn]=Biletvisar +GenericName[nso]=Molebeledi wa Ponagalo +GenericName[pa]=ਚਿੱਤਰ ਦਰਸ਼ਕ +GenericName[pl]=Przeglądarka obrazków +GenericName[pt]=Visualizador de Imagens +GenericName[pt_BR]=Visualizador de Imagens +GenericName[ro]=Vizualizor de imagini +GenericName[ru]=Просмотр изображений +GenericName[rw]=Mugaraza Shusho +GenericName[se]=Govvačájeheaddji +GenericName[sk]=Prehliadač obrázkov +GenericName[sl]=Pregledovalnik slik +GenericName[sr]=Приказивач слика +GenericName[sr@Latn]=Prikazivač slika +GenericName[sv]=Bildvisare +GenericName[ta]=பிம்ப காட்சி +GenericName[tg]=Намоиши тасвирот +GenericName[th]=เครื่องมือแสดงภาพ +GenericName[tr]=Resim Göstericisi +GenericName[uk]=Переглядач зображень +GenericName[uz]=Расм кўрувчи +GenericName[ven]=Tshivhoni tsha Mutaleli +GenericName[wa]=Håyneu d' imådjes +GenericName[xh]=Umboniseli Womfanekiso +GenericName[zh_CN]=图片查看程序 +GenericName[zh_HK]=圖像檢視器 +GenericName[zh_TW]=影像檢視程式 +GenericName[zu]=Umbonisi Womfanekiso +X-DCOP-ServiceType=Multi +Categories=Qt;KDE;Graphics; diff --git a/kuickshow/src/kuickshow.h b/kuickshow/src/kuickshow.h new file mode 100644 index 0000000..d6239b6 --- /dev/null +++ b/kuickshow/src/kuickshow.h @@ -0,0 +1,178 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2006 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef KUICKSHOW_H +#define KUICKSHOW_H + +#include <qevent.h> +#include <qguardedptr.h> +#include <qstring.h> +#include <qvaluelist.h> + +#include <kfileitem.h> +#include <kmainwindow.h> +#include <kurl.h> + +#include <Imlib.h> + +#include "aboutwidget.h" + +class FileWidget; +class ImageWindow; +class ImData; +class KuickConfigDialog; + +class KAccel; +class KConfig; +class KToggleAction; +class AboutWidget; + +class KURL; +class KURLComboBox; + +class KuickFile; + +class DelayedRepeatEvent +{ +public: + DelayedRepeatEvent( ImageWindow *view, QKeyEvent *ev ) { + viewer = view; + event = ev; + } + DelayedRepeatEvent( ImageWindow *view, int action, void *data ) { + this->viewer = view; + this->action = action; + this->data = data; + this->event = 0L; + } + + ~DelayedRepeatEvent() { + delete event; + } + + enum Action + { + DeleteCurrentFile, + TrashCurrentFile, + AdvanceViewer + }; + + ImageWindow *viewer; + QKeyEvent *event; + int action; + void *data; +}; + + +class KuickShow : public KMainWindow +{ + Q_OBJECT + +public: + KuickShow( const char *name=0 ); + ~KuickShow(); + + virtual void show(); + static QValueList<ImageWindow*> s_viewers; + + // overridden to make KDCOPActionProxy work -- all our actions are not + // in the mainwindow's collection, but in the filewidget's. + virtual KActionCollection* actionCollection() const; + + +protected: + virtual void readProperties( KConfig * ); + void initImlibParams( ImData *, ImlibInitParams * ); + void tryShowNextImage(); + +private slots: + void toggleBrowser(); + void slotQuit() { delete this; } + void slotPrint(); + void slotConfigApplied(); + void slotConfigClosed(); + void messageCantLoadImage( const KuickFile * file, const QString& message); + bool showImage(const KFileItem *, bool newWindow = false, + bool fullscreen = false, bool moveToTopLeft = true ); + void showFileItem( ImageWindow *, const KFileItem * ); + void slotHighlighted( const KFileItem * ); + void slotSelected( const KFileItem * ); + void dirSelected( const KURL& ); + void configuration(); + void about(); + void startSlideShow(); + void pauseSlideShow(); + void nextSlide(); + void nextSlide( KFileItem *item ); + void viewerDeleted(); + void slotDropped( const KFileItem *, QDropEvent *, const KURL::List &); + void slotSetActiveViewer( ImageWindow *i ) { m_viewer = i; } + void slotAdvanceImage( ImageWindow *, int steps ); + + void slotShowInSameWindow(); + void slotShowInOtherWindow(); + void slotShowFullscreen(); + + void slotReplayEvent(); + void slotOpenURL(); + void slotSetURL( const KURL& ); + void slotURLComboReturnPressed(); +// void invalidateImages( const KFileItemList& items ); + void slotDeleteCurrentImage(ImageWindow *viewer); + void slotTrashCurrentImage(ImageWindow *viewer); + void slotDeleteCurrentImage(); + void slotTrashCurrentImage(); + + void doReplay(); + +private: + void initGUI( const KURL& startDir ); + bool eventFilter( QObject *, QEvent * ); + void initImlib(); + void saveProperties( KConfig * ); + void saveSettings(); + bool haveBrowser() const; + void delayedRepeatEvent( ImageWindow *, QKeyEvent * ); + void abortDelayedEvent(); + void deleteAllViewers(); + void redirectDeleteAndTrashActions(KActionCollection *coll); + + void delayAction(DelayedRepeatEvent *event); + void replayAdvance(DelayedRepeatEvent *event); + + void performDeleteCurrentImage(QWidget *parent); + void performTrashCurrentImage(QWidget *parent); + + uint viewItem, renameItem, deleteItem, printItem; + uint m_slideshowCycle; + + FileWidget *fileWidget; + KURLComboBox *cmbPath; + KuickConfigDialog *dialog; + ImlibData *id; + ImageWindow *m_viewer; + KToggleAction *oneWindowAction; + KAccel *m_accel; + DelayedRepeatEvent *m_delayedRepeatItem; + QTimer *m_slideTimer; + bool m_slideShowStopped; + KToggleAction *m_toggleBrowserAction; + QGuardedPtr<AboutWidget> aboutWidget; +}; + +#endif diff --git a/kuickshow/src/kurlwidget.cpp b/kuickshow/src/kurlwidget.cpp new file mode 100644 index 0000000..0a23fa3 --- /dev/null +++ b/kuickshow/src/kurlwidget.cpp @@ -0,0 +1,42 @@ +/* This file is part of the KDE project + Copyright (C) 1998,1999,2000 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qtooltip.h> + +#include <kurl.h> +#include <krun.h> + +#include "kurlwidget.h" + +KURLWidget::KURLWidget(const QString& text, QWidget *parent, const char *name) + : KURLLabel( parent, name ) +{ + setText( text ); + connect( this, SIGNAL( leftClickedURL() ), SLOT( run() )); + setUseTips( true ); +} + +void KURLWidget::run() +{ + KURL ku( url() ); + if ( ku.isValid() ) { + (void) new KRun( ku, this ); + } +} + +#include "kurlwidget.moc" diff --git a/kuickshow/src/kurlwidget.h b/kuickshow/src/kurlwidget.h new file mode 100644 index 0000000..2f35e00 --- /dev/null +++ b/kuickshow/src/kurlwidget.h @@ -0,0 +1,36 @@ +/* This file is part of the KDE project + Copyright (C) 1998,1999,2000 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef KURLWIDGET_H +#define KURLWIDGET_H + +#include <kurllabel.h> + +class KURLWidget : public KURLLabel +{ + Q_OBJECT + +public: + KURLWidget( const QString& text, QWidget *, const char *name=0 ); + +protected slots: + virtual void run(); + +}; + +#endif diff --git a/kuickshow/src/main.cpp b/kuickshow/src/main.cpp new file mode 100644 index 0000000..dfb462f --- /dev/null +++ b/kuickshow/src/main.cpp @@ -0,0 +1,66 @@ +/* This file is part of the KDE project + Copyright (C) 1998-2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qstring.h> + +#include <kaboutdata.h> +#include <kapplication.h> +#include <kcmdlineargs.h> +#include <klocale.h> +#include <kdebug.h> + +#include "kuickshow.h" +#include "version.h" + +static KCmdLineOptions options[] = +{ + { "lastfolder", I18N_NOOP("Start in the last visited folder, not the " + "current working folder."), 0 }, + { "d", 0, 0 }, // short option for --lastdir + { "+[files]", I18N_NOOP("Optional image filenames/urls to show"), 0 }, + KCmdLineLastOption +}; + +extern "C" KDE_EXPORT int kdemain(int argc, char **argv) +{ + KAboutData about( + "kuickshow", I18N_NOOP( "KuickShow" ), KUICKSHOWVERSION, + I18N_NOOP("A fast and versatile image viewer" ), + KAboutData::License_GPL, "(c) 1998-2006, Carsten Pfeiffer", + 0 /*text*/, "http://devel-home.kde.org/~pfeiffer/" ); + + about.addAuthor( "Carsten Pfeiffer", 0, "pfeiffer@kde.org", + "http://devel-home.kde.org/~pfeiffer/" ); + about.addCredit( "Rober Hamberger", 0, "rh474@bingo-ev.de" ); + about.addCredit( "Thorsten Scheuermann", 0, "uddn@rz.uni-karlsruhe.de" ); + + KCmdLineArgs::init( argc, argv, &about ); + KCmdLineArgs::addCmdLineOptions( options ); + + KApplication app; + + if ( app.isRestored() ) { + (new KuickShow())->restore( 1, false ); // don't show automatically + } + else { + KuickShow *k = new KuickShow( "kuickshow" ); + app.setMainWidget( k ); + } + + return app.exec(); +} diff --git a/kuickshow/src/mainwidget.cpp b/kuickshow/src/mainwidget.cpp new file mode 100644 index 0000000..caa6700 --- /dev/null +++ b/kuickshow/src/mainwidget.cpp @@ -0,0 +1,43 @@ +/* This file is part of the KDE project + Copyright (C) 1998,1999 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include "fileview.h" +#include "kuickdata.h" +#include "mainwidget.h" + + +MainWidget::MainWidget( QString startDir, QWidget *parent, + const char *name ) : QWidget ( parent, name ) +{ + box = new FileView( startDir, true, (QDir::Dirs | QDir::Files), + this, "fileview" ); +} + + +MainWidget::~MainWidget() +{ + +} + + +// for now, no layout managers +void MainWidget::resizeEvent( QResizeEvent * ) +{ + box->resize( width(), height() ); +} +#include "mainwidget.moc" diff --git a/kuickshow/src/mainwidget.h b/kuickshow/src/mainwidget.h new file mode 100644 index 0000000..36285dd --- /dev/null +++ b/kuickshow/src/mainwidget.h @@ -0,0 +1,47 @@ +/* This file is part of the KDE project + Copyright (C) 1998 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef MAINWIDGET_H +#define MAINWIDGET_H + +#include <qevent.h> +#include <qstring.h> +#include <qwidget.h> + +class FileView; + +class MainWidget : public QWidget +{ + Q_OBJECT + +public: + MainWidget( QString, QWidget *parent, const char *name=0L); + ~MainWidget(); + + FileView* getFileBox() { return box; } + +protected: + virtual void resizeEvent( QResizeEvent * ); + +private: + FileView *box; + +}; + + +#endif diff --git a/kuickshow/src/printing.cpp b/kuickshow/src/printing.cpp new file mode 100644 index 0000000..be57ca7 --- /dev/null +++ b/kuickshow/src/printing.cpp @@ -0,0 +1,338 @@ +/* This file is part of the KDE project + Copyright (C) 2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qcheckbox.h> +#include <qfont.h> +#include <qfontmetrics.h> +#include <qgrid.h> +#include <qhbox.h> +#include <qlayout.h> +#include <qimage.h> +#include <kimageeffect.h> +#include <qpaintdevicemetrics.h> +#include <qpainter.h> +#include <qradiobutton.h> +#include <qvbuttongroup.h> +#include <qcolor.h> + +#include <kcombobox.h> +#include <kdialog.h> +#include <klocale.h> +#include <kdebug.h> +#include <kglobalsettings.h> +#include <knuminput.h> +#include <kprinter.h> +#include <ktempfile.h> + +#include "imagewindow.h" +#include "printing.h" +#include "version.h" + +bool Printing::printImage( ImageWindow& imageWin, QWidget *parent ) +{ + QString imageURL = imageWin.url().prettyURL(); + KPrinter printer; + printer.setDocName( imageURL ); + printer.setCreator( "KuickShow-" KUICKSHOWVERSION ); + + KPrinter::addDialogPage( new KuickPrintDialogPage( parent, "kuick page")); + + if ( printer.setup( parent, i18n("Print %1").arg(printer.docName().section('/', -1)) ) ) + { + KTempFile tmpFile( QString::null, ".png" ); + if ( tmpFile.status() == 0 ) + { + tmpFile.setAutoDelete( true ); + if ( imageWin.saveImage( tmpFile.name(), true ) ) + return printImageWithQt( tmpFile.name(), printer, + imageURL ); + } + + return false; + } + + return true; // user aborted +} + +bool Printing::printImageWithQt( const QString& filename, KPrinter& printer, + const QString& originalFileName ) +{ + QImage image( filename ); + if ( image.isNull() ) { + kdWarning() << "Can't load image: " << filename << " for printing.\n"; + return false; + } + + QPainter p; + p.begin( &printer ); + + QPaintDeviceMetrics metrics( &printer ); + p.setFont( KGlobalSettings::generalFont() ); + QFontMetrics fm = p.fontMetrics(); + + int w = metrics.width(); + int h = metrics.height(); + + QString t = "true"; + QString f = "false"; + + // Black & white print? + if ( printer.option( "app-kuickshow-blackwhite" ) != f) { + image = image.convertDepth( 1, Qt::MonoOnly | Qt::ThresholdDither | Qt::AvoidDither ); + } + + int filenameOffset = 0; + bool printFilename = printer.option( "app-kuickshow-printFilename" ) != f; + if ( printFilename ) { + filenameOffset = fm.lineSpacing() + 14; + h -= filenameOffset; // filename goes into one line! + } + + // + // shrink image to pagesize, if necessary + // + bool shrinkToFit = (printer.option( "app-kuickshow-shrinkToFit" ) != f); + QSize imagesize = image.size(); + if ( shrinkToFit && (image.width() > w || image.height() > h) ) { + imagesize.scale( w, h, QSize::ScaleMin ); + } + + + // + // align image + // + bool ok = false; + int alignment = printer.option("app-kuickshow-alignment").toInt( &ok ); + if ( !ok ) + alignment = Qt::AlignCenter; // default + + int x = 0; + int y = 0; + + // ### need a GUI for this in KuickPrintDialogPage! + // x - alignment + if ( alignment & Qt::AlignHCenter ) + x = (w - imagesize.width())/2; + else if ( alignment & Qt::AlignLeft ) + x = 0; + else if ( alignment & Qt::AlignRight ) + x = w - imagesize.width(); + + // y - alignment + if ( alignment & Qt::AlignVCenter ) + y = (h - imagesize.height())/2; + else if ( alignment & Qt::AlignTop ) + y = 0; + else if ( alignment & Qt::AlignBottom ) + y = h - imagesize.height(); + + // + // perform the actual drawing + // + p.drawImage( QRect( x, y, imagesize.width(), imagesize.height()), image ); + + if ( printFilename ) + { + QString fname = minimizeString( originalFileName, fm, w ); + if ( !fname.isEmpty() ) + { + int fw = fm.width( fname ); + int x = (w - fw)/2; + int y = metrics.height() - filenameOffset/2; + p.drawText( x, y, fname ); + } + } + + p.end(); + + return true; +} + +QString Printing::minimizeString( QString text, const QFontMetrics& + metrics, int maxWidth ) +{ + if ( text.length() <= 5 ) + return QString::null; // no sense to cut that tiny little string + + bool changed = false; + while ( metrics.width( text ) > maxWidth ) + { + int mid = text.length() / 2; + text.remove( mid, 2 ); // remove 2 characters in the middle + changed = true; + } + + if ( changed ) // add "..." in the middle + { + int mid = text.length() / 2; + if ( mid <= 5 ) // sanity check + return QString::null; + + text.replace( mid - 1, 3, "..." ); + } + + return text; +} + + +/////////////////////////////////////////////////////////////////// +/////////////////////////////////////////////////////////////////// + + +KuickPrintDialogPage::KuickPrintDialogPage( QWidget *parent, const char *name ) + : KPrintDialogPage( parent, name ) +{ + setTitle( i18n("Image Settings") ); + + QVBoxLayout *layout = new QVBoxLayout( this ); + layout->setMargin( KDialog::marginHint() ); + layout->setSpacing( KDialog::spacingHint() ); + + m_addFileName = new QCheckBox( i18n("Print fi&lename below image"), this); + m_addFileName->setChecked( true ); + layout->addWidget( m_addFileName ); + + m_blackwhite = new QCheckBox ( i18n("Print image in &black and white"), this); + m_blackwhite->setChecked( false ); + layout->addWidget (m_blackwhite ); + + QVButtonGroup *group = new QVButtonGroup( i18n("Scaling"), this ); + group->setRadioButtonExclusive( true ); + layout->addWidget( group ); + // m_shrinkToFit = new QRadioButton( i18n("Shrink image to &fit, if necessary"), group ); + m_shrinkToFit = new QCheckBox( i18n("Shrink image to &fit, if necessary"), group ); + m_shrinkToFit->setChecked( true ); + + QWidget *widget = new QWidget( group ); + QGridLayout *grid = new QGridLayout( widget, 3, 3 ); + grid->addColSpacing( 0, 30 ); + grid->setColStretch( 0, 0 ); + grid->setColStretch( 1, 1 ); + grid->setColStretch( 2, 10 ); + + m_scale = new QRadioButton( i18n("Print e&xact size: "), widget ); + m_scale->setEnabled( false ); // ### + grid->addMultiCellWidget( m_scale, 0, 0, 0, 1 ); + group->insert( m_scale ); + connect( m_scale, SIGNAL( toggled( bool )), SLOT( toggleScaling( bool ))); + + m_units = new KComboBox( false, widget, "unit combobox" ); + grid->addWidget( m_units, 0, 2, AlignLeft ); + m_units->insertItem( i18n("Millimeters") ); + m_units->insertItem( i18n("Centimeters") ); + m_units->insertItem( i18n("Inches") ); + + m_width = new KIntNumInput( widget, "exact width" ); + grid->addWidget( m_width, 1, 1 ); + m_width->setLabel( i18n("&Width:" ) ); + m_width->setMinValue( 1 ); + + m_height = new KIntNumInput( widget, "exact height" ); + grid->addWidget( m_height, 2, 1 ); + m_height->setLabel( i18n("&Height:" ) ); + m_height->setMinValue( 1 ); +} + +KuickPrintDialogPage::~KuickPrintDialogPage() +{ +} + +void KuickPrintDialogPage::getOptions( QMap<QString,QString>& opts, + bool /*incldef*/ ) +{ + QString t = "true"; + QString f = "false"; + +// ### opts["app-kuickshow-alignment"] = ; + opts["app-kuickshow-printFilename"] = m_addFileName->isChecked() ? t : f; + opts["app-kuickshow-blackwhite"] = m_blackwhite->isChecked() ? t : f; + opts["app-kuickshow-shrinkToFit"] = m_shrinkToFit->isChecked() ? t : f; + opts["app-kuickshow-scale"] = m_scale->isChecked() ? t : f; + opts["app-kuickshow-scale-unit"] = m_units->currentText(); + opts["app-kuickshow-scale-width-pixels"] = QString::number( scaleWidth() ); + opts["app-kuickshow-scale-height-pixels"] = QString::number( scaleHeight() ); +} + +void KuickPrintDialogPage::setOptions( const QMap<QString,QString>& opts ) +{ + QString t = "true"; + QString f = "false"; + + m_addFileName->setChecked( opts["app-kuickshow-printFilename"] != f ); + // This sound strange, but if I copy the code on the line above, the checkbox + // was always checked. And this isn't the wanted behavior. So, with this works. + // KPrint magic ;-) + m_blackwhite->setChecked ( false ); + m_shrinkToFit->setChecked( opts["app-kuickshow-shrinkToFit"] != f ); + m_scale->setChecked( opts["app-kuickshow-scale"] == t ); + + m_units->setCurrentItem( opts["app-kuickshow-scale-unit"] ); + + bool ok; + int val = opts["app-kuickshow-scale-width-pixels"].toInt( &ok ); + if ( ok ) + setScaleWidth( val ); + val = opts["app-kuickshow-scale-height-pixels"].toInt( &ok ); + if ( ok ) + setScaleHeight( val ); + + if ( m_scale->isChecked() == m_shrinkToFit->isChecked() ) + m_shrinkToFit->setChecked( !m_scale->isChecked() ); + + // ### re-enable when implementednn + toggleScaling( false && m_scale->isChecked() ); +} + +void KuickPrintDialogPage::toggleScaling( bool enable ) +{ + m_width->setEnabled( enable ); + m_height->setEnabled( enable ); + m_units->setEnabled( enable ); +} + +int KuickPrintDialogPage::scaleWidth() const +{ + return fromUnitToPixels( m_width->value() ); +} + +int KuickPrintDialogPage::scaleHeight() const +{ + return fromUnitToPixels( m_height->value() ); +} + +void KuickPrintDialogPage::setScaleWidth( int pixels ) +{ + m_width->setValue( (int) pixelsToUnit( pixels ) ); +} + +void KuickPrintDialogPage::setScaleHeight( int pixels ) +{ + m_width->setValue( (int) pixelsToUnit( pixels ) ); +} + +int KuickPrintDialogPage::fromUnitToPixels( float /*value*/ ) const +{ + return 1; // ### +} + +float KuickPrintDialogPage::pixelsToUnit( int /*pixels*/ ) const +{ + return 1.0; // ### +} + +#include "printing.moc" diff --git a/kuickshow/src/printing.h b/kuickshow/src/printing.h new file mode 100644 index 0000000..eb679f7 --- /dev/null +++ b/kuickshow/src/printing.h @@ -0,0 +1,85 @@ +/* This file is part of the KDE project + Copyright (C) 2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef PRINTING_H +#define PRINTING_H + +#include <qfontmetrics.h> +#include <qstring.h> + +#include <kdeprint/kprintdialogpage.h> + +class QCheckBox; +class QRadioButton; +class KComboBox; +class KPrinter; +class KIntNumInput; + +class ImageWindow; + + +class Printing +{ +public: + static bool printImage( ImageWindow& imageWin, QWidget *parent = 0L); + static bool printImageWithQt( const QString& filename, KPrinter& printer, + const QString& originalFileName ); + +private: + static void addConfigPages(); + static QString minimizeString( QString text, const QFontMetrics& metrics, + int maxWidth ); + +}; + +class KuickPrintDialogPage : public KPrintDialogPage +{ + Q_OBJECT + +public: + KuickPrintDialogPage( QWidget *parent = 0L, const char *name = 0 ); + ~KuickPrintDialogPage(); + + virtual void getOptions(QMap<QString,QString>& opts, bool incldef = false); + virtual void setOptions(const QMap<QString,QString>& opts); + +private slots: + void toggleScaling( bool enable ); + +private: + // return values in pixels! + int scaleWidth() const; + int scaleHeight() const; + + void setScaleWidth( int pixels ); + void setScaleHeight( int pixels ); + + int fromUnitToPixels( float val ) const; + float pixelsToUnit( int pixels ) const; + + QCheckBox *m_shrinkToFit; + QRadioButton *m_scale; + KIntNumInput *m_width; + KIntNumInput *m_height; + KComboBox *m_units; + QCheckBox *m_addFileName; + QCheckBox *m_blackwhite; + +}; + +#endif // PRINTING_H diff --git a/kuickshow/src/slideshowwidget.cpp b/kuickshow/src/slideshowwidget.cpp new file mode 100644 index 0000000..447b996 --- /dev/null +++ b/kuickshow/src/slideshowwidget.cpp @@ -0,0 +1,80 @@ +/* This file is part of the KDE project + Copyright (C) 2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#include <qcheckbox.h> +#include <qlayout.h> + +#include <kdialog.h> +#include <klocale.h> +#include <knuminput.h> + +#include "slideshowwidget.h" + + +SlideShowWidget::SlideShowWidget( QWidget *parent, const char *name ) + : QWidget( parent, name ) +{ +// setTitle( i18n("Slideshow") ); + + QVBoxLayout *layout = new QVBoxLayout( this ); + layout->setSpacing( KDialog::spacingHint() ); + + m_fullScreen = new QCheckBox( i18n("Switch to &full-screen"), this ); + m_startWithCurrent = new QCheckBox( i18n("S&tart with current image"), this); + + m_delayTime = new KIntNumInput( this, "delay time" ); + m_delayTime->setLabel( i18n("De&lay between slides:") ); + m_delayTime->setSuffix( i18n(" sec") ); + m_delayTime->setRange( 0, 60 * 60 ); // 1 hour + m_delayTime->setSpecialValueText( i18n("Wait for key") ); + + m_cycles = new KIntNumInput( m_delayTime, 1, this ); + m_cycles->setLabel( i18n("&Iterations (0 = infinite):") ); + m_cycles->setSpecialValueText( i18n("infinite") ); + m_cycles->setRange( 0, 500 ); + + layout->addWidget( m_fullScreen ); + layout->addWidget( m_startWithCurrent ); + layout->addWidget( m_delayTime ); + layout->addWidget( m_cycles ); + layout->addStretch( 1 ); + + loadSettings( *kdata ); +} + +SlideShowWidget::~SlideShowWidget() +{ +} + +void SlideShowWidget::loadSettings( const KuickData& data ) +{ + m_delayTime->setValue( data.slideDelay / 1000 ); + m_cycles->setValue( data.slideshowCycles ); + m_fullScreen->setChecked( data.slideshowFullscreen ); + m_startWithCurrent->setChecked( !data.slideshowStartAtFirst ); +} + +void SlideShowWidget::applySettings( KuickData& data ) +{ + data.slideDelay = m_delayTime->value() * 1000; + data.slideshowCycles = m_cycles->value(); + data.slideshowFullscreen = m_fullScreen->isChecked(); + data.slideshowStartAtFirst = !m_startWithCurrent->isChecked(); +} + +#include "slideshowwidget.moc" diff --git a/kuickshow/src/slideshowwidget.h b/kuickshow/src/slideshowwidget.h new file mode 100644 index 0000000..c651103 --- /dev/null +++ b/kuickshow/src/slideshowwidget.h @@ -0,0 +1,44 @@ +/* This file is part of the KDE project + Copyright (C) 2002 Carsten Pfeiffer <pfeiffer@kde.org> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public + License as published by the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +#ifndef SLIDESHOWWIDGET_H +#define SLIDESHOWWIDGET_H + +#include "kuickdata.h" + +class QCheckBox; +class KIntNumInput; + +class SlideShowWidget : public QWidget +{ + Q_OBJECT +public: + SlideShowWidget( QWidget *parent, const char *name ); + ~SlideShowWidget(); + + virtual void loadSettings( const KuickData& data ); + virtual void applySettings( KuickData& data ); + +private: + KIntNumInput *m_delayTime; + KIntNumInput *m_cycles; + QCheckBox *m_fullScreen; + QCheckBox *m_startWithCurrent; +}; + +#endif // SLIDESHOWWIDGET_H diff --git a/kuickshow/src/version.h b/kuickshow/src/version.h new file mode 100644 index 0000000..2465967 --- /dev/null +++ b/kuickshow/src/version.h @@ -0,0 +1,3 @@ +#ifndef KUICKSHOWVERSION +#define KUICKSHOWVERSION "0.8.13" +#endif diff --git a/stamp-h.in b/stamp-h.in new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/stamp-h.in @@ -0,0 +1,2 @@ +doc +kuickshow |
