asn1dn: | The type is an ASN.1 distinguished "
"name. If empty, DN from the Subject field in the certificate will be "
"used"
msgstr ""
#: newprofilewizard.cpp:267 profileracoonoptions.cpp:48
msgid ""
"Local ID type
none: | No ID | "
"tr> address: | The type is the IP address. This is the default "
"type if you do not specify an identifier to use | user_fqdn:"
"td> | The type is a USER_FTQDN (user fully-qualified domain name) | "
"tr> fqdn: | The type is a FTQDN (fully-qualified domain name)"
"td> | keyid (file): | The type is a KEY_ID, read from the "
"file | keyid: | The type is a KEY_ID, specified in "
"field | asn1dn: | The type is an ASN.1 distinguished "
"name. If empty, DN from the Subject field in the certificate will be "
"used"
msgstr ""
#: newprofilewizard.cpp:359
#, fuzzy
msgid "Import &Ipsec config file"
msgstr "&OpenVPN-configuratiebestand importeren"
#: newprofilewizard.cpp:554 preferencesdialog.cpp:1490
#, fuzzy, c-format
msgid "SSH key found: %1"
msgstr "ID gevonden: %1"
#: newprofilewizard.cpp:581
#, fuzzy
msgid "Virtual IP address options"
msgstr "Virtueel IP-adres gebruiken"
#: newprofilewizard.cpp:707 newprofilewizardconnectionstatuscheck.ui:16
#, no-c-format
msgid "Connection status check"
msgstr "Controle verbindingsstatus"
#: newprofilewizard.cpp:722 newprofilewizardconnectoptions.ui:16
#, no-c-format
msgid "Connect options"
msgstr "Verbindingsopties"
#: newprofilewizard.cpp:732 newprofilewizardgeneral.ui:35
#, no-c-format
msgid "General settings"
msgstr "Algemene instellingen"
#: newprofilewizard.cpp:742
msgid ""
"Now you have completed all steps for creating a new profile.\n"
"Click \"Finish\" to continue."
msgstr ""
"U hebt nu alle stappen voor het aanmaken van een nieuw profiel doorlopen.\n"
"Klik op \"Voltooien\" om verder te gaan."
#: newprofilewizard.cpp:820
#, fuzzy, c-format
msgid "Profile name: %1"
msgstr "Profielnaam:"
#: newprofilewizard.cpp:834
msgid "Gateway is empty!"
msgstr "Gateway is leeg."
#: newprofilewizard.cpp:840
#, c-format
msgid "Gateway: %1"
msgstr "Gateway: %1"
#: newprofilewizard.cpp:844
#, c-format
msgid "Description: %1"
msgstr "Beschrijving: %1"
#: newprofilewizard.cpp:871 newprofilewizard.cpp:898
#: newprofilewizardciscoselection.ui:16
#, no-c-format
msgid "Cisco selection"
msgstr "Cisco-selectie"
#: newprofilewizard.cpp:874 newprofilewizard.cpp:902 newprofilewizard.cpp:937
#: newprofilewizard.cpp:1031 newprofilewizard.cpp:1124
#: newprofilewizard.cpp:1159 newprofilewizard.cpp:1199
#: newprofilewizard.cpp:1249 newprofilewizard.cpp:1280
#: newprofilewizard.cpp:1325
#, c-format
msgid "Selected type: %1"
msgstr "Geselecteerd type: %1"
#: newprofilewizard.cpp:914
msgid "FreeSWAN/OpenSWAN settings"
msgstr "Instellingen FreeSWAN/OpenSWAN"
#: newprofilewizard.cpp:925 newprofilewizard.cpp:1150 newprofilewizard.cpp:2671
#: newprofilewizard.cpp:2679 newprofilewizardcert.ui:469
#: newprofilewizardcert.ui:578 newprofilewizardcert.ui:633
#: preferencesdialog.cpp:4309 preferencesdialog.cpp:4315
#: preferencesdialog.cpp:5942 preferencesdialog.cpp:5950
#: profilesmartcardoptionsbase.ui:179 profilesmartcardoptionsbase.ui:242
#: profilesmartcardoptionsbase.ui:300
#, no-c-format
msgid "ID"
msgstr ""
#: newprofilewizard.cpp:933 newprofilewizard.cpp:1156
#, fuzzy
msgid "IPSec selection"
msgstr "Typeselectie"
#: newprofilewizard.cpp:1024 newprofilewizard.cpp:1108
#: newprofilewizard.cpp:1493 newprofilewizard.cpp:1778
#: newprofilewizard.cpp:1878
msgid "Authentication settings"
msgstr "Authenticatie-instellingen"
#: newprofilewizard.cpp:1025 newprofilewizard.cpp:1107
msgid "Racoon settings"
msgstr "Racoon-instellingen"
#: newprofilewizard.cpp:1109 newprofilewizard.cpp:1319
#: newprofilewizard.cpp:1483 newprofilewizard.cpp:1494
#: newprofilewizard.cpp:1545 newprofilewizard.cpp:1731
#: newprofilewizard.cpp:1849 newprofilewizard.cpp:2174
#: newprofilewizard.cpp:2198 newprofilewizard.cpp:2322
#: newprofilewizarduser.ui:16
#, no-c-format
msgid "User settings"
msgstr "Gebruikersinstellingen"
#: newprofilewizard.cpp:1151 newprofilewizard.cpp:1185
#, fuzzy
msgid "&Certificate/Smartcard"
msgstr "Certificaat/PSK"
#: newprofilewizard.cpp:1190 newprofilewizardopenvpnauth.ui:44
#, fuzzy, no-c-format
msgid "OpenVPN authentication settings"
msgstr "Authenticatie-instellingen"
#: newprofilewizard.cpp:1196 newprofilewizardopenvpnselection.ui:16
#, no-c-format
msgid "OpenVPN selection"
msgstr "OpenVPN-selectie"
#: newprofilewizard.cpp:1236
msgid "PPTP settings"
msgstr "PPTP-instellingen"
#: newprofilewizard.cpp:1237 newprofilewizard.cpp:1275
#: newprofilewizard.cpp:1321 newprofilewizard.cpp:1485
#: newprofilewizard.cpp:1495 newprofilewizard.cpp:1546
#: newprofilewizard.cpp:1732 newprofilewizard.cpp:1741
#: newprofilewizard.cpp:1850 newprofilewizard.cpp:1859
#: newprofilewizard.cpp:1879 newprofilewizardnetwork.ui:16
#, no-c-format
msgid "Network settings"
msgstr "Netwerkinstellingen"
#: newprofilewizard.cpp:1238 newprofilewizard.cpp:1276
#: newprofilewizard.cpp:1322 newprofilewizard.cpp:1486
#: newprofilewizard.cpp:1496 newprofilewizard.cpp:1548
#: newprofilewizard.cpp:1734 newprofilewizard.cpp:1743
#: newprofilewizard.cpp:1852 newprofilewizard.cpp:1861
#: newprofilewizard.cpp:1880
#, fuzzy
msgid "Network routes"
msgstr "Opties netwerkroute"
#: newprofilewizard.cpp:1274
#, fuzzy
msgid "Vtun options"
msgstr "PSK-opties"
#: newprofilewizard.cpp:1320
#, fuzzy
msgid "SSH options"
msgstr "PSK-opties"
#: newprofilewizard.cpp:1395
msgid ""
"The required daemon (%1) is available, you will be able to use this "
"connection."
msgstr ""
"De vereiste daemon (%1) is beschikbaar. U kunt deze verbinding gebruiken."
#: newprofilewizard.cpp:1400 newprofilewizard.cpp:1402
msgid ""
"The required daemon (%1) isn't available, you will not be able to use this "
"connection until the daemon is not installed."
msgstr ""
"De vereiste daemon (%1) is niet beschikbaar. U zult deze verbinding pas "
"kunnen gebruiken als de daemon is geïnstalleerd."
#: newprofilewizard.cpp:1415 newprofilewizard.cpp:1417
msgid ""
"The required version (%1) of FreeSWAN/OpenSWAN was not found. You will not "
"be able to use the Agressive Mode. It will be used the Main Mode."
msgstr ""
"De vereiste versie (%1) van FreeSWAN/OpenSWAN is niet gevonden. U zult de "
"agressieve modus niet kunnen gebruiken. De hoofdmodus zal gebruikt worden."
#: newprofilewizard.cpp:1436
#, fuzzy
msgid "The required daemons (%1 and %2) are available."
msgstr "De vereiste daemons (%2 en %2) zijn beschikbaar."
#: newprofilewizard.cpp:1440
msgid ""
"The required daemons (%1 and %2) aren't available, you will not be able to "
"use this connection until the daemons are not installed."
msgstr ""
"De vereiste daemons (%1 en %2) zijn niet beschikbaar. U zult deze verbinding "
"pas kunnen gebruiken als de daemons zijn geïnstalleerd."
#: newprofilewizard.cpp:1459
msgid "Cisco selection: import PCF file"
msgstr "Cisco-selectie: importeer PCF-bestand"
#: newprofilewizard.cpp:1476
msgid "Cisco selection: enter data manually"
msgstr "Cisco-selectie: voer gegevens handmatig in"
#: newprofilewizard.cpp:1481
#, fuzzy
msgid "Cisco selection: cisco"
msgstr "Cisco-selectie"
#: newprofilewizard.cpp:1484 newprofilewizard.cpp:1969
#: newprofilewizard.cpp:2107
msgid "Cisco settings"
msgstr "Cisco-instellingen"
#: newprofilewizard.cpp:1491
#, fuzzy
msgid "Cisco selection: ciscoorig"
msgstr "Cisco-selectie"
#: newprofilewizard.cpp:1509
msgid "Cisco IPSec ID"
msgstr "ID Cisco IPSec"
#: newprofilewizard.cpp:1510
msgid "Cisco IPSec ID is empty!"
msgstr "ID van Cisco IPSec is leeg."
#: newprofilewizard.cpp:1514
#, c-format
msgid "Cisco IPSec ID: %1"
msgstr "ID Cisco-IPSec: %1"
#: newprofilewizard.cpp:1520
msgid "Allow empty group password: true"
msgstr "Leeg groepswachtwoord toestaan: waar"
#: newprofilewizard.cpp:1522
msgid "Allow empty group password: false"
msgstr "Leeg groepswachtwoord toestaan: onwaar"
#: newprofilewizard.cpp:1547 newprofilewizard.cpp:1733
#: newprofilewizard.cpp:1742 newprofilewizard.cpp:1851
#: newprofilewizard.cpp:1860 newprofilewizard.cpp:1881
#: newprofilewizardnat.ui:16
#, no-c-format
msgid "NAT settings"
msgstr "NAT-instellingen"
#: newprofilewizard.cpp:1558 newprofilewizard.cpp:1560
#: newprofilewizard.cpp:1804 newprofilewizard.cpp:1806
#, c-format
msgid "Use Mode Config: %1"
msgstr "Configuratiemodus gebruiken: %1"
#: newprofilewizard.cpp:1565 newprofilewizard.cpp:1812
#, fuzzy
msgid "Exchange mode (%1): %2"
msgstr "Uitwisselmodus:"
#: newprofilewizard.cpp:1584 newprofilewizard.cpp:1586
#, c-format
msgid "Disable opportunistic encryption: %1"
msgstr "Opportunistische versleuteling uitschakelen: %1"
#: newprofilewizard.cpp:1587
#, c-format
msgid "Right next hop: %1"
msgstr "Volgende hop rechts: %1"
#: newprofilewizard.cpp:1588
#, c-format
msgid "Left next hop: %1"
msgstr "Volgende hop links: %1"
#: newprofilewizard.cpp:1589
#, fuzzy, c-format
msgid "Use PFS: %1"
msgstr "PFS &uitschakelen"
#: newprofilewizard.cpp:1600
#, fuzzy
msgid "Local ID (Group ID)"
msgstr "Lokaal IP (virtueel):"
#: newprofilewizard.cpp:1601 preferencesdialog.cpp:5019
#: preferencesdialog.cpp:5020
#, fuzzy
msgid "Local ID (Group ID) is empty!"
msgstr "Wachtwoord is leeg"
#: newprofilewizard.cpp:1611
#, fuzzy
msgid "Remote ID"
msgstr "Speciaal remote-id"
#: newprofilewizard.cpp:1612
#, fuzzy
msgid "Remote ID is empty!"
msgstr "Remote netwerk is leeg."
#: newprofilewizard.cpp:1623 newprofilewizard.cpp:1830
#, fuzzy, c-format
msgid "Type of local ID: %1"
msgstr "Het type tunnelapparaat"
#: newprofilewizard.cpp:1627 newprofilewizard.cpp:1834
#, fuzzy, c-format
msgid "Local ID value: %1"
msgstr "Lokaal IP: %1"
#: newprofilewizard.cpp:1630 newprofilewizard.cpp:1837
#, fuzzy, c-format
msgid "Type of remote ID: %1"
msgstr "Het type tunnelapparaat"
#: newprofilewizard.cpp:1634 newprofilewizard.cpp:1841
#, fuzzy, c-format
msgid "Remote ID value: %1"
msgstr "Lokaal IP: %1"
#: newprofilewizard.cpp:1677 newprofilewizard.cpp:1695
#: newprofilewizard.cpp:1702 newprofilewizard.cpp:1720
msgid "Use custom %1: %2"
msgstr ""
#: newprofilewizard.cpp:1677 newprofilewizard.cpp:1695
#: newprofilewizardfreeswan.ui:417 profileipsecoptionsbase.ui:674
#, no-c-format
msgid "ESP"
msgstr ""
#: newprofilewizard.cpp:1682
#, fuzzy, c-format
msgid "ESP settings: %1"
msgstr "PSK-instellingen"
#: newprofilewizard.cpp:1688 newprofilewizard.cpp:1689
#: preferencesdialog.cpp:4916
msgid "Use custom ESP checked but none selected!"
msgstr ""
#: newprofilewizard.cpp:1702 newprofilewizard.cpp:1720
#: newprofilewizardfreeswan.ui:302 profileipsecoptionsbase.ui:507
#, fuzzy, no-c-format
msgid "IKE"
msgstr "KDE"
#: newprofilewizard.cpp:1707
#, fuzzy, c-format
msgid "IKE settings: %1"
msgstr "PSK-instellingen"
#: newprofilewizard.cpp:1713 newprofilewizard.cpp:1714
#: preferencesdialog.cpp:4910
msgid "Use custom IKE checked but none selected!"
msgstr ""
#: newprofilewizard.cpp:1720
#, fuzzy
msgid "false"
msgstr "Profiel"
#: newprofilewizard.cpp:1728 newprofilewizard.cpp:1739
#: newprofilewizard.cpp:1848 newprofilewizard.cpp:1858
#, fuzzy, c-format
msgid "Authenticate with username and password: %1"
msgstr "Authenticeren met gebruikersnaam en &wachtwoord"
#: newprofilewizard.cpp:1755
#, fuzzy
msgid "IPSec selection: import profile file"
msgstr "OpenVPN-selectie: importeer profielbestand"
#: newprofilewizard.cpp:1777
#, fuzzy
msgid "IPSec settings"
msgstr "PSK-instellingen"
#: newprofilewizard.cpp:1780
#, fuzzy
msgid "IPSec selection: enter data manually"
msgstr "Cisco-selectie: voer gegevens handmatig in"
#: newprofilewizard.cpp:1796
msgid "Hash algorithm (%1): %2"
msgstr "Hash-algoritme (%1): %2"
#: newprofilewizard.cpp:1816
#, fuzzy
msgid "DH group (%1): %2"
msgstr "Hash-algoritme (%1): %2"
#: newprofilewizard.cpp:1820
#, fuzzy
msgid "Authentication algorithm (%1) (phase 2): %2"
msgstr "Authenticatie mislukt (%1)."
#: newprofilewizard.cpp:1825
#, fuzzy
msgid "Encryption algorithm (%1) (phase 1): %2"
msgstr "Hash-algoritme (%1): %2"
#: newprofilewizard.cpp:1869
msgid "Tunnel device type (%1): %2"
msgstr "Type tunnelapparaat (%1): %2"
#: newprofilewizard.cpp:1894
msgid "TLS auth file"
msgstr "TLS-autorisatiebestand"
#: newprofilewizard.cpp:1908
msgid "TLS remote host"
msgstr "TLS remote host"
#: newprofilewizard.cpp:1924
msgid "HTTP proxy host"
msgstr "HTTP-proxyhost"
#: newprofilewizard.cpp:1950 newprofilewizardpsk.ui:16
#, no-c-format
msgid "PSK settings"
msgstr "PSK-instellingen"
#: newprofilewizard.cpp:1973
msgid "Auth selection: use PSK"
msgstr "Authenticatieselectie: gebruik PSK"
#: newprofilewizard.cpp:1986
msgid "Certificate format"
msgstr "Certificaatformaat"
#: newprofilewizard.cpp:2047 newprofilewizard.cpp:2080
#: newprofilewizard.cpp:2116 newprofilewizardcert.ui:16
#, no-c-format
msgid "Certificate settings"
msgstr "Certificaatinstellingen"
#: newprofilewizard.cpp:2073
msgid "Auth selection: use certificate"
msgstr "Authenticatieselectie: gebruik certificaat"
#: newprofilewizard.cpp:2111
#, fuzzy
msgid "Auth selection: use Hybrid"
msgstr "Authenticatieselectie: gebruik PSK"
#: newprofilewizard.cpp:2123
#, fuzzy
msgid "P12 cert selection: use smartcard"
msgstr "P12-certificaattype: certificaattype is 'overig'"
#: newprofilewizard.cpp:2131
msgid "P12 cert selection: cert type is PKCS12"
msgstr "P12-certificaatselectie: certificaattype is PKCS12"
#: newprofilewizard.cpp:2146
msgid "P12 cert selection: cert type is other"
msgstr "P12-certificaattype: certificaattype is 'overig'"
#: newprofilewizard.cpp:2158
msgid "OpenVPN selection: import profile file"
msgstr "OpenVPN-selectie: importeer profielbestand"
#: newprofilewizard.cpp:2173 newprofilewizard.cpp:2197
#, fuzzy
msgid "OpenVPN auth: authenticate with username and password"
msgstr "OpenVPN-import: authenticeer met gebruikersnaam en wachtwoord"
#: newprofilewizard.cpp:2186
msgid "OpenVPN settings"
msgstr "OpenVPN-instellingen"
#: newprofilewizard.cpp:2188
msgid "OpenVPN selection: enter data manually"
msgstr "OpenVPN-selectie: voer gegevens handmatig in"
#: newprofilewizard.cpp:2207
#, fuzzy
msgid "OpenVPN auth: use only CA cert authenticate with username and password"
msgstr ""
"Alleen CA-certificaat gebruiken en authenticeren met gebruikersnaam en "
"wachtwoord"
#: newprofilewizard.cpp:2218
#, fuzzy
msgid "OpenVPN auth: dont authenticate with username and password"
msgstr "OpenVPN-import: authenticeer met gebruikersnaam en wachtwoord"
#: newprofilewizard.cpp:2227
#, fuzzy, c-format
msgid "OpenVPN auth: use special authentication algorithm: %1"
msgstr "OpenVPN-import: gebruik NS-certificaattype: %1"
#: newprofilewizard.cpp:2234
#, fuzzy
msgid "OpenVPN auth: dont use special authentication algorithm"
msgstr "OpenVPN-import: gebruik NS-certificaattype: %1"
#: newprofilewizard.cpp:2240
#, fuzzy, c-format
msgid "OpenVPN auth: use authentication method: %1"
msgstr "OpenVPN-import: gebruik NS-certificaattype: %1"
#: newprofilewizard.cpp:2270
#, fuzzy, c-format
msgid "Using custom DNS server: %1"
msgstr "Gebruikergedefinieerde DNS-server:"
#: newprofilewizard.cpp:2283
#, fuzzy, c-format
msgid "Using custom DNS search domain: %1"
msgstr "Gebruikergedefinieerde DNS-server:"
#: newprofilewizard.cpp:2296
#, fuzzy, c-format
msgid "Using custom DNS domain: %1"
msgstr "Gebruikergedefinieerde DNS-server:"
#: newprofilewizard.cpp:2313
#, fuzzy, c-format
msgid "Using auth method: %1"
msgstr "Authenticatiemethode"
#: newprofilewizard.cpp:2334
#, fuzzy, c-format
msgid "Vtun: use userdefined port: %1"
msgstr "NAT-instellingen: gebruik opgegeven poort: %1"
#: newprofilewizard.cpp:2339 newprofilewizard.cpp:2342
#: preferencesdialog.cpp:5583
#, fuzzy
msgid "No profile name entered!"
msgstr "Profielnaam bestaat al!"
#: newprofilewizard.cpp:2339 preferencesdialog.cpp:5583
#, fuzzy
msgid "No profile name"
msgstr "Profielnaam:"
#: newprofilewizard.cpp:2341
#, fuzzy
msgid "Vtun profile name"
msgstr "Profielnaam:"
#: newprofilewizard.cpp:2356
#, fuzzy, c-format
msgid "SSH: use userdefined port: %1"
msgstr "NAT-instellingen: gebruik opgegeven poort: %1"
#: newprofilewizard.cpp:2364
#, fuzzy
msgid "SSH: use user password authentication"
msgstr "Wachtwoord voor authenticatie"
#: newprofilewizard.cpp:2370
#, fuzzy
msgid "SSH: use key authentication"
msgstr "Gebruikersnaam voor authenticatie"
#: newprofilewizard.cpp:2380
#, fuzzy, c-format
msgid "SSH: use costum key: %1"
msgstr "ID gevonden: %1"
#: newprofilewizard.cpp:2386
#, fuzzy, c-format
msgid "SSH: use autotected key: %1"
msgstr "NAT-instellingen: gebruik opgegeven poort: %1"
#: newprofilewizard.cpp:2395
#, fuzzy, c-format
msgid "SSH: use ssh config remote script: %1"
msgstr "NAT-instellingen: gebruik opgegeven poort: %1"
#: newprofilewizard.cpp:2404 newprofilewizard.cpp:2605
msgid "Special server certificate"
msgstr "Speciaal servercertificaat"
#: newprofilewizard.cpp:2405 preferencesdialog.cpp:5717
#, fuzzy
msgid "%1 cant be empty!"
msgstr "PSK mag niet leeg zijn"
#: newprofilewizard.cpp:2423
#, fuzzy
msgid "local IP address"
msgstr "Lokaal IP: %1"
#: newprofilewizard.cpp:2433
#, fuzzy
msgid "Local IP address for virtual IP"
msgstr "Lokaal IP-adres (voor tunnel)"
#: newprofilewizard.cpp:2451
#, fuzzy
msgid "remote IP address"
msgstr "Geen IP-adres"
#: newprofilewizard.cpp:2453
#, fuzzy
msgid "local and remote IP address"
msgstr "Lokaal IP: %1"
#: newprofilewizard.cpp:2462
#, fuzzy
msgid "Remote IP address for virtual IP"
msgstr "Remote IP (voor tunnel)"
#: newprofilewizard.cpp:2473 preferencesdialog.cpp:5435
#, fuzzy
msgid "No valid netmask entered!"
msgstr "Geen geldig IP-adres opgegeven"
#: newprofilewizard.cpp:2473 preferencesdialog.cpp:5435
#, fuzzy
msgid "No valid netmask"
msgstr "Netmasker"
#: newprofilewizard.cpp:2494
#, fuzzy
msgid "Using virtual IP addresses (local: %1, remote: %2): "
msgstr "Virtueel IP-adres gebruiken"
#: newprofilewizard.cpp:2499
#, fuzzy
msgid "Using virtual IP address (local: %1, netmask: %2): "
msgstr "Virtueel IP-adres gebruiken"
#: newprofilewizard.cpp:2505
#, fuzzy
msgid "Not using virtual IP addresses"
msgstr "Virtueel IP-adres gebruiken"
#: newprofilewizard.cpp:2511
#, fuzzy
msgid "No valid IP address for %1 entered!"
msgstr "Geen geldig IP-adres opgegeven"
#: newprofilewizard.cpp:2511 preferencesdialog.cpp:5091
#: preferencesdialog.cpp:5341 preferencesdialog.cpp:5352
#: preferencesdialog.cpp:5409 preferencesdialog.cpp:5595
#: preferencesdialog.cpp:5648
msgid "No Valid IP Address"
msgstr "Geen geldig IP-adres"
#: newprofilewizard.cpp:2549 newprofilewizard.cpp:2569
msgid "Pre shared key file"
msgstr "Bestand met preshared key"
#: newprofilewizard.cpp:2607 preferencesdialog.cpp:5913
msgid "Special server certificate can't be empty!"
msgstr "Speciaal servercertificaat mag niet leeg zijn."
#: newprofilewizard.cpp:2615
msgid "CA Certificate can't be empty!"
msgstr "CA-certificaat mag niet leeg zijn."
#: newprofilewizard.cpp:2624
msgid "Certificate can't be empty!"
msgstr "Certificaat mag niet leeg zijn."
#: newprofilewizard.cpp:2630
msgid "Path to private key"
msgstr "Pad naar private sleutel"
#: newprofilewizard.cpp:2631
msgid "Path to private key can't be empty!"
msgstr "Pad naar private sleutel mag niet leeg zijn."
#: newprofilewizard.cpp:2658 preferencesdialog.cpp:5929
#, fuzzy
msgid "Slot at smartcard can't be empty!"
msgstr "TLS remote host mag niet leeg zijn."
#: newprofilewizard.cpp:2658 preferencesdialog.cpp:5929
msgid "No smartcard slot"
msgstr ""
#: newprofilewizard.cpp:2666 preferencesdialog.cpp:5937
#, fuzzy
msgid "ID for certificate at smartcard can't be empty!"
msgstr "Certificaat mag niet leeg zijn."
#: newprofilewizard.cpp:2666 preferencesdialog.cpp:5937
#, fuzzy
msgid "No certificate ID"
msgstr "CA-certificaat"
#: newprofilewizard.cpp:2681 newprofilewizardcert.ui:588
#: newprofilewizardcert.ui:638 preferencesdialog.cpp:4317
#: preferencesdialog.cpp:5952 profilesmartcardoptionsbase.ui:189
#: profilesmartcardoptionsbase.ui:247
#, no-c-format
msgid "Label"
msgstr ""
#: newprofilewizard.cpp:2687 newprofilewizardcert.ui:553
#: preferencesdialog.cpp:4326 preferencesdialog.cpp:5958
#: profilesmartcardoptionsbase.ui:154
#, no-c-format
msgid "auto"
msgstr ""
#: newprofilewizard.cpp:2689 newprofilewizardcert.ui:558
#: preferencesdialog.cpp:4328 preferencesdialog.cpp:5960
#: profilesmartcardoptionsbase.ui:159
#, no-c-format
msgid "sign"
msgstr ""
#: newprofilewizard.cpp:2691 newprofilewizardcert.ui:563
#: preferencesdialog.cpp:4330 preferencesdialog.cpp:5962
#: profilesmartcardoptionsbase.ui:164
#, fuzzy, no-c-format
msgid "recover"
msgstr "over"
#: newprofilewizard.cpp:2702 preferencesdialog.cpp:5974
msgid "Library path to lib for use with smartcard can't be empty!"
msgstr ""
#: newprofilewizard.cpp:2702 preferencesdialog.cpp:5974
msgid "No providers lib"
msgstr ""
#: newprofilewizard.cpp:2718
msgid "Username is empty!"
msgstr "Gebruikersnaam is leeg."
#: newprofilewizard.cpp:2724
#, fuzzy, c-format
msgid "User options: username: %1"
msgstr "Gebruikersnaam: %1"
#: newprofilewizard.cpp:2738
msgid "Password is empty but you have checked to store it!"
msgstr "Wachtwoord is leeg, maar u hebt opgegeven deze op te slaan."
#: newprofilewizard.cpp:2756
#, fuzzy
msgid "NT domain name"
msgstr "(NT-)domeinnaam \"%1\" wordt gebruikt."
#: newprofilewizard.cpp:2757
#, fuzzy
msgid "NT domain name is empty but you have checked to specifiy one!"
msgstr "Wachtwoord is leeg, maar u hebt opgegeven deze op te slaan."
#: newprofilewizard.cpp:2764
#, fuzzy, c-format
msgid "User options: NT domain name: %1"
msgstr "(NT-)domeinnaam \"%1\" wordt gebruikt."
#: newprofilewizard.cpp:2786 preferencesdialog.cpp:4661
#: preferencesdialog.cpp:4662
#, fuzzy
msgid "No remote network entered!"
msgstr "Geen IP-adres voor extern netwerk opgegeven."
#: newprofilewizard.cpp:2786 preferencesdialog.cpp:4661
#, fuzzy
msgid "No remote network"
msgstr "Netwerk op afstand"
#: newprofilewizard.cpp:2807 newprofilewizard.cpp:2808
#: preferencesdialog.cpp:5265 preferencesdialog.cpp:5266
msgid "Invalid values in IP address (remote net)!"
msgstr "Ongeldige waarden in IP-adres (remote net)!"
#: newprofilewizard.cpp:2807 preferencesdialog.cpp:5265
msgid "Invalid Values in IP Address"
msgstr "Ongeldige waarden in IP-adres"
#: newprofilewizard.cpp:2816
#, fuzzy
msgid "Use remote network: %1/%2"
msgstr "Netwerk op afstand"
#: newprofilewizard.cpp:2828
msgid "Remote network is empty!"
msgstr "Remote netwerk is leeg."
#: newprofilewizard.cpp:2839
#, fuzzy, c-format
msgid "Network options: use own MTU size: %1"
msgstr "Gebruikersnaam: %1"
#: newprofilewizard.cpp:2849
#, fuzzy, c-format
msgid "Network options: use own MRU size: %1"
msgstr "Gebruikersnaam: %1"
#: newprofilewizard.cpp:2858
#, fuzzy, c-format
msgid "Network options: Tunnel device type: %1"
msgstr "Type tunnelapparaat:"
#: newprofilewizard.cpp:2873
#, fuzzy
msgid "Network route options: replace default route"
msgstr "Standaardroute vervangen"
#: newprofilewizard.cpp:2879
msgid "Network route options: dont replace default route"
msgstr ""
#: newprofilewizard.cpp:2887
#, fuzzy
msgid "Network route options: use additional network routes"
msgstr "Aanvullende netwerkroutes worden ingesteld..."
#: newprofilewizard.cpp:2903
msgid "Network route options: additional network: %1/%2 gw %3 %4"
msgstr ""
#: newprofilewizard.cpp:2918
msgid "NAT settings: use NAT"
msgstr "NAT-instellingen: gebruik NAT"
#: newprofilewizard.cpp:2920
msgid "NAT settings: use no NAT"
msgstr "NAT-instellingen: gebruik geen NAT"
#: newprofilewizard.cpp:2922 newprofilewizard.cpp:2924
#, fuzzy
msgid "NAT settings: use UDP"
msgstr "NAT-instellingen: gebruik NAT"
#: newprofilewizard.cpp:2927
#, fuzzy, c-format
msgid "NAT settings: use userdefined Port: %1"
msgstr "NAT-instellingen: gebruik opgegeven poort: %1"
#: newprofilewizard.cpp:2938
msgid "Connect options: connecting to profile \"%1\" after creating it."
msgstr ""
"Verbindingsopties: verbindt met profiel \"%1\" nadat deze is aangemaakt."
#: newprofilewizard.cpp:2948
msgid "Connection status check: use connection status check"
msgstr "Controle verbindingsstatus: gebruik controle op verbindingsstatus"
#: newprofilewizard.cpp:2954
msgid "Connection status check: dont use connection status check"
msgstr "Controle verbindingsstatus: gebruik geen controle op verbindingsstatus"
#: newprofilewizard.cpp:2961
msgid "Connection status check: do reconnect after connection lost"
msgstr ""
"Controle verbindingsstatus: verbind opnieuw nadat de verbinding verloren is "
"gegaan."
#: newprofilewizard.cpp:2967
msgid "Connection status check: dont reconnect after connection lost"
msgstr ""
"Controle verbindingsstatus: verbind niet opnieuw nadat de verbinding "
"verloren is gegaan."
#: newprofilewizard.cpp:2974
#, fuzzy
msgid "Connection status check: ping userdefined IP address"
msgstr "Controle verbindingsstatus: ping naar opgegeven IP-adres"
#: newprofilewizard.cpp:2980
#, fuzzy
msgid "Connection status check: dont ping userdefined IP address"
msgstr "Controle verbindingsstatus: ping niet naar opgegeven IP-adres"
#: newprofilewizard.cpp:2988
#, c-format
msgid "Connection status check: use connection interval: %1"
msgstr "Controle verbindingsstatus: gebruik verbindingsinterval: %1"
#: newprofilewizard.cpp:2989
#, c-format
msgid "Connection status check: success count: %1"
msgstr "Controle verbindingsstatus: aantal succesvol: %1"
#: newprofilewizard.cpp:3003
#, fuzzy
msgid "The value of userdefined IP address is not a valid IP address!"
msgstr "De waarde van het opgegeven IP-adres is geen geldig IP-adres."
#: newprofilewizard.cpp:3009
msgid "Userdefinied IP for ping"
msgstr "Eigen IP-adres voor ping"
#: newprofiledialogbase.ui:88 newprofilewizard.cpp:3340
#, no-c-format
msgid "Import Cisco PCF profile"
msgstr "Cisco PCF-profiel importeren"
#: newprofilewizard.cpp:3351 newprofilewizard.cpp:3369
#: newprofilewizard.cpp:3388
msgid "Import of \"%1\" has been failed."
msgstr "Importeren van \"%1\" is mislukt."
#: newprofilewizard.cpp:3352 newprofilewizard.cpp:3370
#: newprofilewizard.cpp:3389 newprofilewizard.cpp:3494
msgid "Import of \"%1\" (%2) has been failed."
msgstr "Importeren van \"%1\" (%2) is mislukt."
#: newprofilewizard.cpp:3376
#, fuzzy
msgid "Import IPSec profile"
msgstr "Profiel importeren"
#: newprofilewizard.cpp:3377
#, fuzzy
msgid "Import IPSec config"
msgstr "OpenVPN-configuratiebestand importeren"
#: newprofilewizard.cpp:3579 profilenetworkrouteoptions.cpp:74
msgid "Do you really want to delete the network \"%1/%2\"?"
msgstr "Wilt u netwerk \"%1/%2\" verwijderen?"
#: newprofilewizard.cpp:3590 profilenetworkrouteoptions.cpp:86
msgid "Add Network Route..."
msgstr "Netwerkroute toevoegen..."
#: newprofilewizard.cpp:3729 newprofilewizard.cpp:3735
#: newprofilewizard.cpp:3741 preferencesdialog.cpp:6866
#: preferencesdialog.cpp:6872 preferencesdialog.cpp:6878
#, c-format
msgid "Pkcs11IdType: %1"
msgstr ""
#: newprofilewizard.cpp:3914 newprofilewizardnetworkroute.ui:49
#: profilenetworkrouteoptionsbase.ui:49
#, no-c-format
msgid "Keep default route"
msgstr "Standaardroute behouden"
#: newprofilewizard.cpp:3916
msgid ""
"Additional network route is needed:\n"
"\n"
"You have selected to keep the default route. You have to add additional "
"network routes to your remote network. Otherwise you probably dont have "
"access to it."
msgstr ""
#: newprofilewizard.cpp:3916
msgid "Route needed"
msgstr ""
#: newprofilewizard.cpp:3975 preferencesdialog.cpp:6998
#: profilenetworkvirtualipoptionsbase.ui:57
#, no-c-format
msgid "Remote IP (virtual):"
msgstr "Remote IP (virtueel):"
#: newprofilewizard.cpp:3979 preferencesdialog.cpp:7002
#, fuzzy
msgid "Netmask for local IP address:"
msgstr "Lokaal IP: %1"
#: openvpnmanagementhandler.cpp:83
msgid "Disconnected to the OpenVPN manage port (%1)."
msgstr "Niet verbonden met de OpenVPN-beheerpoort (%1)."
#: openvpnmanagementhandler.cpp:94
#, fuzzy
msgid "Socket to the OpenVPN manage port (%1) closed."
msgstr "Verbonden met de OpenVPN-beheerpoort (%1)."
#: openvpnmanagementhandler.cpp:109
msgid "Connected to the OpenVPN manage port (%1)."
msgstr "Verbonden met de OpenVPN-beheerpoort (%1)."
#: openvpnmanagementhandler.cpp:128
msgid "Got no greeting within %1 seconds from management interface, retrying."
msgstr ""
#: openvpnmanagementhandler.cpp:201
#, fuzzy
msgid "Got greeting from management interface."
msgstr ""
"Gebruikersnaam en wachtwoord konden niet uit de beheerinterface worden "
"gelezen."
#: openvpnmanagementhandler.cpp:208 openvpnmanagementhandler.cpp:267
#: openvpnmanagementhandler.cpp:317 openvpnmanagementhandler.cpp:386
#: openvpnmanagementhandler.cpp:405 openvpnmanagementhandler.cpp:489
#: openvpnmanagementhandler.cpp:730 openvpnmanagementhandler.cpp:800
#: openvpnmanagementhandler.cpp:806 openvpnmanagementhandler.cpp:812
#: openvpnmanagementhandler.cpp:821
#, fuzzy
msgid "got %1 message"
msgstr "Remote bericht"
#: openvpnmanagementhandler.cpp:270 openvpnmanagementhandler.cpp:271
msgid "Send username..."
msgstr "Gebruikersnaam verzenden..."
#: openvpnmanagementhandler.cpp:285
msgid "User name"
msgstr "Gebruikersnaam"
#: openvpnmanagementhandler.cpp:285
msgid "Enter username:"
msgstr "Gebruikersnaam invoeren:"
#: openvpnmanagementhandler.cpp:291
msgid "username got from user"
msgstr "gebruikersnaam ontvangen van gebruiker"
#: openvpnmanagementhandler.cpp:320 openvpnmanagementhandler.cpp:321
msgid "Send password..."
msgstr "Wachtwoord verzenden..."
#: openvpnmanagementhandler.cpp:336
msgid " password:"
msgstr " wachtwoord:"
#: openvpnmanagementhandler.cpp:342
msgid "password got from user"
msgstr "wachtwoord ontvangen van gebruiker"
#: openvpnmanagementhandler.cpp:389 openvpnmanagementhandler.cpp:390
msgid "Send HTTP Proxy username..."
msgstr "HTTP-proxy-gebruikersnaam verzenden..."
#: openvpnmanagementhandler.cpp:408 openvpnmanagementhandler.cpp:409
msgid "Send HTTP Proxy password..."
msgstr "HTTP-proxy-wachtwoord verzenden..."
#: openvpnmanagementhandler.cpp:429
msgid "Enter HTTP proxy auth password"
msgstr "Wachtwoord voor HTTP-proxy-authenticatie invoeren"
#: openvpnmanagementhandler.cpp:430
msgid "Enter HTTP proxy auth password:"
msgstr "Wachtwoord voor HTTP-proxy-authenticatie invoeren:"
#: openvpnmanagementhandler.cpp:431
msgid "HTTP proxy auth password:"
msgstr "Wachtwoord voor HTTP-proxy-authenticatie:"
#: openvpnmanagementhandler.cpp:432
msgid "Save HTTP proxy auth password"
msgstr "Wachtwoord voor HTTP-proxy-authenticatie opslaan"
#: openvpnmanagementhandler.cpp:434
msgid "HTTP proxy auth password requested...\n"
msgstr "Wachtwoord voor HTTP-proxy-authenticatie verzocht...\n"
#: openvpnmanagementhandler.cpp:443
msgid "HTTP proxy auth password got from user"
msgstr "Wachtwoord voor HTTP-proxy-authenticatie ontvangen van gebruiker"
#: openvpnmanagementhandler.cpp:457
msgid "Send HTTP proxy auth password..."
msgstr "Wachtwoord voor HTTP-proxy-authenticatie verzenden..."
#: openvpnmanagementhandler.cpp:576
msgid "wrong private key password"
msgstr "onjuist wachtwoord voor private sleutel"
#: openvpnmanagementhandler.cpp:655
#, fuzzy
msgid ""
"OpenvpnManagementHandler: CA certifcate file could not be loaded! Please "
"check your CA certificate file."
msgstr ""
"Certificaatbestand (%1) kon niet worden geladen. Controleer het pad er naar "
"toe."
#: openvpnmanagementhandler.cpp:657
#, fuzzy
msgid "Certificate load failed (%1)!"
msgstr "Certificaatimport mislukt."
#: openvpnmanagementhandler.cpp:666
msgid ""
"OpenvpnManagementHandler: Hash algorithm %1 could not found! Please check "
"your OpenVPN settings."
msgstr ""
#: openvpnmanagementhandler.cpp:668
#, fuzzy
msgid "Hash algorithm not found (%1)!"
msgstr "Hash-algoritme (%1): %2"
#: openvpnmanagementhandler.cpp:684 openvpnmanagementhandler.cpp:749
msgid "Enter token pin"
msgstr ""
#: openvpnmanagementhandler.cpp:685
msgid "Enter eToken pin for unlocking token \"%1\":"
msgstr ""
#: openvpnmanagementhandler.cpp:686
msgid "eToken pin:"
msgstr ""
#: openvpnmanagementhandler.cpp:691
msgid "eToken pin for unlocking token requested...\n"
msgstr ""
#: openvpnmanagementhandler.cpp:700 openvpnmanagementhandler.cpp:765
#, fuzzy
msgid "token password got from user"
msgstr "wachtwoord ontvangen van gebruiker"
#: openvpnmanagementhandler.cpp:710 openvpnmanagementhandler.cpp:711
#: openvpnmanagementhandler.cpp:775 openvpnmanagementhandler.cpp:776
#, fuzzy
msgid "Send token password..."
msgstr "Wachtwoord verzenden..."
#: openvpnmanagementhandler.cpp:741 openvpnmanagementhandler.cpp:797
#, fuzzy
msgid "token name detected: %1\n"
msgstr "Tunnelapparaat: %1\n"
#: openvpnmanagementhandler.cpp:750
msgid "Enter pin for unlocking token \"%1\":"
msgstr ""
#: openvpnmanagementhandler.cpp:756
#, fuzzy
msgid "PIN for unlocking token requested...\n"
msgstr "Wachtwoord voor HTTP-proxy-authenticatie verzocht...\n"
#: openvpnmanagementhandler.cpp:813
#, fuzzy
msgid "Token \"%1\" is not inserted!"
msgstr "\"%1\" kon niet worden aangemaakt."
#: openvpnmanagementhandler.cpp:813
#, fuzzy
msgid "Token missing"
msgstr "Hulpprogramma ontbreekt"
#: openvpnmanagementhandler.cpp:826
msgid "External program fork failed, need security parameter."
msgstr ""
#: openvpnmanagementhandler.cpp:833
#, fuzzy, c-format
msgid "got other management message: %1"
msgstr "ontving bericht 'private key password'"
#: openvpnmanagementhandler.cpp:864
#, c-format
msgid "Socket state is strange: %1"
msgstr ""
#: openvpnmanagementhandler.cpp:891
#, fuzzy
msgid "Connecting to the OpenVPN manage port (%1)..."
msgstr "Verbonden met de OpenVPN-beheerpoort (%1)."
#: openvpnmanagementhandler.cpp:899
msgid "Management greeting timer started."
msgstr ""
#: openvpnmanagementhandler.cpp:906
msgid "connection already in progress, skipping connect"
msgstr ""
#: openvpnmanagementhandler.cpp:922
#, fuzzy
msgid "Connecting to the OpenVPN manage port (%1)... host found"
msgstr "Verbonden met de OpenVPN-beheerpoort (%1)."
#: preferencesdialog.cpp:60
msgid "Preferences..."
msgstr "Voorkeuren..."
#: preferencesdialog.cpp:86
msgid "Manage Profiles"
msgstr "Profielen beheren"
#: configdaemonoptionsbase.ui:1534 preferencesdialog.cpp:113
#: preferencesdialog.cpp:1679
#, no-c-format
msgid "low"
msgstr "laag"
#: configdaemonoptionsbase.ui:1529 preferencesdialog.cpp:115
#: preferencesdialog.cpp:1681
#, no-c-format
msgid "default"
msgstr "standaard"
#: configdaemonoptionsbase.ui:1539 preferencesdialog.cpp:117
#: preferencesdialog.cpp:1683
#, no-c-format
msgid "high"
msgstr "hoog"
#: preferencesdialog.cpp:123
msgid "Collecting daemon tool data..."
msgstr ""
#: preferencesdialog.cpp:291
msgid "Collecting helper tool data..."
msgstr ""
#: configdaemonoptionsbase.ui:1467 preferencesdialog.cpp:417
#: preferencesdialog.cpp:4394
#, fuzzy, no-c-format
msgid "general"
msgstr "Algemeen"
#: configdaemonoptionsbase.ui:1472 preferencesdialog.cpp:419
#: preferencesdialog.cpp:4396
#, fuzzy, no-c-format
msgid "general + packets"
msgstr "Algemene instellingen"
#: preferencesdialog.cpp:534 preferencesdialog.cpp:535
#, fuzzy
msgid "L2TP (%1)"
msgstr "IPSec (racoon)"
#: preferencesdialog.cpp:608
#, fuzzy
msgid "Collecting kernel crypto..."
msgstr "Verbinden met..."
#: preferencesdialog.cpp:672
msgid "Collecting OpenVPN capabilities..."
msgstr ""
#: preferencesdialog.cpp:761
#, fuzzy
msgid "done."
msgstr "&Doneren"
#: preferencesdialog.cpp:787 preferencesdialog.cpp:4035
#: preferencesdialog.cpp:5535
#, fuzzy
msgid "0"
msgstr "10"
#: preferencesdialog.cpp:788 preferencesdialog.cpp:4037
#: preferencesdialog.cpp:5537
#, fuzzy
msgid "1"
msgstr "10"
#: preferencesdialog.cpp:959 preferencesdialog.cpp:977
#: preferencesdialog.cpp:985 preferencesdialog.cpp:993
msgid "Application"
msgstr "Toepassing"
#: configgeneraloptions.ui:24 importcertificatedialogbase.ui:35
#: preferencesdialog.cpp:959 preferencesdialog.cpp:960
#: preferencesdialog.cpp:1056 preferencesdialog.cpp:1057
#: preferencesdialog.cpp:1157 preferencesdialog.cpp:1158
#: profilegeneraloptionsbase.ui:16 profileipsecoptionsbase.ui:31
#: profileopenvpnoptionsbase.ui:31 profileracoonoptionsbase.ui:47
#, no-c-format
msgid "General"
msgstr "Algemeen"
#: configdebugoptionsbase.ui:24 configlogoptionsbase.ui:16
#: preferencesdialog.cpp:977 preferencesdialog.cpp:978
#, no-c-format
msgid "Debug"
msgstr "Debug"
#: configconnectoptionsbase.ui:16 preferencesdialog.cpp:985
#: preferencesdialog.cpp:986
#, no-c-format
msgid "Connect"
msgstr "Verbinden"
#: logviewerdialogbase.ui:22 preferencesdialog.cpp:993
#: preferencesdialog.cpp:994
#, no-c-format
msgid "Log"
msgstr "Log"
#: preferencesdialog.cpp:1000 preferencesdialog.cpp:1004
#: preferencesdialog.cpp:1039
msgid "Programs"
msgstr "Programma's"
#: preferencesdialog.cpp:1004 preferencesdialog.cpp:1005
msgid "Daemons"
msgstr "Daemons"
#: preferencesdialog.cpp:1039 preferencesdialog.cpp:1040
msgid "Helper Programs"
msgstr "Hulpprogramma's"
#: preferencesdialog.cpp:1052 preferencesdialog.cpp:1056
#: preferencesdialog.cpp:1076 preferencesdialog.cpp:1097
#: preferencesdialog.cpp:1117 preferencesdialog.cpp:1138
#: preferencesdialog.cpp:1157 preferencesdialog.cpp:1177
#: preferencesdialog.cpp:1197 preferencesdialog.cpp:1217
#: preferencesdialog.cpp:1238 preferencesdialog.cpp:1259
#: preferencesdialog.cpp:1299 preferencesdialog.cpp:1347
#: preferencesdialog.cpp:1387 preferencesdialog.cpp:1407
#: preferencesdialog.cpp:1427 preferencesdialog.cpp:1447
#: preferencesdialog.cpp:1501 preferencesdialog.cpp:1521
#: preferencesdialog.cpp:1540 preferencesdialog.cpp:1559
msgid "Profile"
msgstr "Profiel"
#: preferencesdialog.cpp:1064 preferencesdialog.cpp:1084
#: preferencesdialog.cpp:1104 preferencesdialog.cpp:1125
#: preferencesdialog.cpp:1146 preferencesdialog.cpp:1165
#: preferencesdialog.cpp:1185 preferencesdialog.cpp:1205
#: preferencesdialog.cpp:1225 preferencesdialog.cpp:1246
#: preferencesdialog.cpp:1267 preferencesdialog.cpp:1307
#: preferencesdialog.cpp:1355 preferencesdialog.cpp:1395
#: preferencesdialog.cpp:1415 preferencesdialog.cpp:1435
#: preferencesdialog.cpp:1455 preferencesdialog.cpp:1509
#: preferencesdialog.cpp:1529 preferencesdialog.cpp:1548
#: preferencesdialog.cpp:1567
msgid "Profile:"
msgstr "Profiel:"
#: preferencesdialog.cpp:1076 preferencesdialog.cpp:1097
#: preferencesdialog.cpp:1117 preferencesdialog.cpp:1138
msgid "Authenticate"
msgstr "Authenticatie"
#: preferencesdialog.cpp:1076
msgid "User data"
msgstr "Gebruikersgegevens"
#: preferencesdialog.cpp:1077 profileuseroptionsbase.ui:16
#, no-c-format
msgid "User Data"
msgstr "Gebruikersgegevens"
#: preferencesdialog.cpp:1117 preferencesdialog.cpp:1118
#: profilesmartcardoptionsbase.ui:24
#, fuzzy, no-c-format
msgid "Smartcard"
msgstr "Ondersteuning voor PKCS&11 smartcard activeren"
#: newprofilewizardnetworkroute.ui:97 preferencesdialog.cpp:1157
#: preferencesdialog.cpp:1177 preferencesdialog.cpp:1197
#: preferencesdialog.cpp:1217 preferencesdialog.cpp:1238
#: profilenetworkrouteoptionsbase.ui:97 profileopenvpnoptionsbase.ui:182
#, no-c-format
msgid "Network"
msgstr "Netwerk"
#: preferencesdialog.cpp:1177 preferencesdialog.cpp:1178
msgid "Routes"
msgstr "Routes"
#: preferencesdialog.cpp:1197 preferencesdialog.cpp:1198
#: profilenetworknatoptionsbase.ui:16
#, no-c-format
msgid "NAT"
msgstr "NAT"
#: newprofilewizardopenvpn.ui:442 preferencesdialog.cpp:1217
#: preferencesdialog.cpp:1218 profilenetworkhttpproxyoptionsbase.ui:16
#: profilenetworkhttpproxyoptionsbase.ui:65
#, no-c-format
msgid "HTTP proxy"
msgstr "HTTP-proxy"
#: preferencesdialog.cpp:1238 preferencesdialog.cpp:1239
#: profilenetworkvirtualipoptionsbase.ui:35
#, no-c-format
msgid "Virtual IP"
msgstr "Virtueel IP"
#: preferencesdialog.cpp:1259 preferencesdialog.cpp:1299
#: preferencesdialog.cpp:1347 preferencesdialog.cpp:1387
#: preferencesdialog.cpp:1407 preferencesdialog.cpp:1427
#: preferencesdialog.cpp:1447
msgid "Connection specific"
msgstr "Verbindingsspecifiek"
#: preferencesdialog.cpp:1299 preferencesdialog.cpp:1300
#: profileracoonoptionsbase.ui:16
#, fuzzy, no-c-format
msgid "Racoon"
msgstr "racoon"
#: preferencesdialog.cpp:1347 preferencesdialog.cpp:1348
msgid "Openswan/strongSwan"
msgstr ""
#: preferencesdialog.cpp:1407 preferencesdialog.cpp:1408
#: profilepptpoptionsbase.ui:16
#, fuzzy, no-c-format
msgid "PPTP/L2TP"
msgstr "PPTP"
#: preferencesdialog.cpp:1484
#, fuzzy, c-format
msgid "processing entry: %1"
msgstr "vpnc: %1"
#: preferencesdialog.cpp:1501 preferencesdialog.cpp:1521
#: preferencesdialog.cpp:1540 preferencesdialog.cpp:1559
msgid "Command Execution"
msgstr "Commando-uitvoering"
#: preferencesdialog.cpp:1501 preferencesdialog.cpp:1502
msgid "Before Connect"
msgstr "Voor het verbinden"
#: preferencesdialog.cpp:1521 preferencesdialog.cpp:1522
msgid "After Connect"
msgstr "Na het verbinden"
#: preferencesdialog.cpp:1540 preferencesdialog.cpp:1541
msgid "Before Disconnect"
msgstr "Voordat verbinding wordt verbroken"
#: preferencesdialog.cpp:1559
msgid "After Disconnect"
msgstr "Nadat verbinding is verbroken"
#: preferencesdialog.cpp:1560 profilecmdexecafterdisconnectoptionsbase.ui:24
#, no-c-format
msgid "Command Execute After Disconnect"
msgstr "Commando uitvoeren na verbreken van verbinding"
#: preferencesdialog.cpp:1763
#, fuzzy, c-format
msgid "connectionTypeChanged(): %1"
msgstr "Verbindingstype:"
#: preferencesdialog.cpp:1865 preferencesdialog.cpp:1887
#: preferencesdialog.cpp:1909
#, c-format
msgid "new type: %1"
msgstr "nieuw type: %1"
#: preferencesdialog.cpp:1933
msgid "new type: none specified"
msgstr "nieuw type: geen gespecificeerd"
#: preferencesdialog.cpp:1937
msgid "unknown type"
msgstr "Onbekend type"
#: preferencesdialog.cpp:2007 preferencesdialog.cpp:2030
#, c-format
msgid "authtype changed by %1."
msgstr ""
#: newprofiledialogbase.ui:487 preferencesdialog.cpp:2008
#: preferencesdialog.cpp:2031 preferencesdialog.cpp:2682
#: preferencesdialog.cpp:2684 preferencesdialog.cpp:2735
#: preferencesdialog.cpp:2737 preferencesdialog.cpp:2751
#: preferencesdialog.cpp:2752 preferencesdialog.cpp:3069
#: preferencesdialog.cpp:3071 preferencesdialog.cpp:3077
#: preferencesdialog.cpp:3078 preferencesdialog.cpp:4518
#, no-c-format
msgid "X.509 Certificate"
msgstr "X.509-certificaat"
#: newprofiledialogbase.ui:492 preferencesdialog.cpp:2010
#: preferencesdialog.cpp:2033 preferencesdialog.cpp:2683
#: preferencesdialog.cpp:2685 preferencesdialog.cpp:2736
#: preferencesdialog.cpp:2738 preferencesdialog.cpp:2812
#: preferencesdialog.cpp:2813 preferencesdialog.cpp:2831
#: preferencesdialog.cpp:2832 preferencesdialog.cpp:2851
#: preferencesdialog.cpp:2852 preferencesdialog.cpp:2863
#: preferencesdialog.cpp:3063 preferencesdialog.cpp:3064
#: preferencesdialog.cpp:3070 preferencesdialog.cpp:3072
#: preferencesdialog.cpp:3082 preferencesdialog.cpp:3083
#: preferencesdialog.cpp:4520
#, no-c-format
msgid "Pre Shared Key"
msgstr "Preshared key"
#: preferencesdialog.cpp:2058
msgid "New authtype: \"%1\"."
msgstr "Nieuw authenticatietype: \"%1\""
#: preferencesdialog.cpp:2089 preferencesdialog.cpp:2859
msgid "Hybrid support detected, enabling cert options"
msgstr ""
#: preferencesdialog.cpp:2097 preferencesdialog.cpp:2867
msgid "Hybrid support not detected, disabling cert options"
msgstr ""
#: preferencesdialog.cpp:2106 preferencesdialog.cpp:2177
#, fuzzy
msgid "Auth type is cert"
msgstr "Auth-gebruikersnaam is leeg."
#: preferencesdialog.cpp:2116 preferencesdialog.cpp:2184
#, fuzzy
msgid "Auth type is hybrid"
msgstr "Authenticatieselectie: gebruik PSK"
#: preferencesdialog.cpp:2136 preferencesdialog.cpp:2210
msgid "Auth type is psk"
msgstr ""
#: preferencesdialog.cpp:2474
#, c-format
msgid "New profile: %1"
msgstr "Nieuw profiel: %1"
#: preferencesdialog.cpp:2544
msgid "profile \"%1\": no network device defined, using \"default\"."
msgstr ""
"profiel \"%1\": geen netwerkapparaat gevonden, \"default\" wordt gebruikt"
#: preferencesdialog.cpp:2551
msgid "profile \"%1\": network device defined, using \"%2\"."
msgstr "profiel \"%1\": netwerkapparaat gedefinieerd, \"%2\" wordt gebruikt"
#: newprofiledialogbase.ui:406 newprofilewizardcert.ui:184
#: preferencesdialog.cpp:2660 profilecertoptionsbase.ui:510
#, no-c-format
msgid "Certificate:"
msgstr "Certificaat:"
#: preferencesdialog.cpp:2791
msgid "insert cisco cert:"
msgstr ""
#: preferencesdialog.cpp:2804
msgid "insert cisco ca cert:"
msgstr ""
#: preferencesdialog.cpp:2889
msgid ""
"%1 is too old. Minimum requirement is %2, disabling Xauth interactive option."
msgstr ""
"%1 is te oud. Minimumvereiste is %2. Optie voor Xauth-interactive wordt "
"uitgeschakeld."
#: preferencesdialog.cpp:2909 profileciscooptionsbase.ui:629
#, no-c-format
msgid "This enables DPD. Requires vpnc >= 0.5.0."
msgstr ""
#: preferencesdialog.cpp:2915
msgid "This enables DPD."
msgstr ""
#: preferencesdialog.cpp:3299
#, fuzzy
msgid "Enable Perfect for&ward secrecy (PFS)"
msgstr "Perfect &forward secrecy (PFS):"
#: advancedprofiledialogbase.ui:97 preferencesdialog.cpp:3415
#: profileciscooptionsbase.ui:343
#, fuzzy, no-c-format
msgid "Perfect for&ward secrecy (PFS):"
msgstr "Perfect &forward secrecy (PFS):"
#: newprofilewizardcert.ui:643 preferencesdialog.cpp:4319
#: profilesmartcardoptionsbase.ui:252
#, no-c-format
msgid "Subject"
msgstr ""
#: newprofilewizardcert.ui:568 preferencesdialog.cpp:4332
#: profilesmartcardoptionsbase.ui:169
#, no-c-format
msgid "any"
msgstr ""
#: preferencesdialog.cpp:4681
msgid "IP address (remote net) is not valid!"
msgstr "IP-adres (remote net) is ongeldig!"
#: preferencesdialog.cpp:4828 preferencesdialog.cpp:4829
#: preferencesdialog.cpp:5035 preferencesdialog.cpp:5036
#, fuzzy
msgid "Local Source IP address is empty!"
msgstr "Wachtwoord is leeg"
#: preferencesdialog.cpp:4828 preferencesdialog.cpp:5035
#, fuzzy
msgid "Local Source IP empty"
msgstr "Wachtwoord is leeg"
#: preferencesdialog.cpp:4837 preferencesdialog.cpp:4838
#: preferencesdialog.cpp:5067 preferencesdialog.cpp:5068
#, fuzzy
msgid "Remote Source IP address is empty!"
msgstr "Remote netwerk is leeg."
#: preferencesdialog.cpp:4837 preferencesdialog.cpp:5067
#, fuzzy
msgid "Remote Source IP empty"
msgstr "Remote netwerk is leeg."
#: preferencesdialog.cpp:4910
msgid "No custom IKE"
msgstr ""
#: preferencesdialog.cpp:4916
msgid "No custom ESP"
msgstr ""
#: preferencesdialog.cpp:5019
#, fuzzy
msgid "Local ID (Group ID) is empty"
msgstr "Wachtwoord is leeg"
#: preferencesdialog.cpp:5048 preferencesdialog.cpp:5049
#, fuzzy
msgid "Remote virtual IP address is empty!"
msgstr "Remote netwerk is leeg."
#: preferencesdialog.cpp:5048
#, fuzzy
msgid "Remote virtual IP empty"
msgstr "Remote netwerk is leeg."
#: preferencesdialog.cpp:5078 preferencesdialog.cpp:5079
msgid "Virtual subnets are empty!"
msgstr ""
#: preferencesdialog.cpp:5078
msgid "Virtual subnets empty"
msgstr ""
#: preferencesdialog.cpp:5091 preferencesdialog.cpp:5092
#: preferencesdialog.cpp:5341 preferencesdialog.cpp:5352
#: preferencesdialog.cpp:5409 preferencesdialog.cpp:5423
#: preferencesdialog.cpp:5595 preferencesdialog.cpp:5609
#: preferencesdialog.cpp:5648 preferencesdialog.cpp:5663
msgid "No valid IP address entered!"
msgstr "Geen geldig IP-adres opgegeven"
#: preferencesdialog.cpp:5107
msgid "No IP address (virtual IP) entered!"
msgstr "Geen IP-adres (virtueel IP) ingevoerd"
#: preferencesdialog.cpp:5375 preferencesdialog.cpp:5376
msgid "No IP address entered!"
msgstr "Geen IP-adres opgegeven"
#: preferencesdialog.cpp:5423 preferencesdialog.cpp:5609
#: preferencesdialog.cpp:5663
#, fuzzy
msgid "No valid IP address"
msgstr "Geen geldig IP-adres"
#: preferencesdialog.cpp:5500
msgid "PSK file can't be empty!"
msgstr "PSK-bestand mag niet leeg zijn!"
#: preferencesdialog.cpp:5500
msgid "Empty PSK file"
msgstr "Leeg PSK-bestand"
#: preferencesdialog.cpp:5507
msgid "PSK can't be empty!"
msgstr "PSK mag niet leeg zijn"
#: preferencesdialog.cpp:5507
msgid "Empty PSK"
msgstr "Lege PSK"
#: preferencesdialog.cpp:5514
#, fuzzy
msgid "TLS authentication file can't be empty!"
msgstr "PSK-bestand mag niet leeg zijn!"
#: preferencesdialog.cpp:5514
#, fuzzy
msgid "Empty TLS authentication file"
msgstr "Authenticatie mislukt (%1)."
#: preferencesdialog.cpp:5678
#, fuzzy
msgid "Virtual IP address must be enabled!"
msgstr "Virtueel IP-adres gebruiken"
#: preferencesdialog.cpp:5678
#, fuzzy
msgid "Virtual IP address disabled"
msgstr "Virtueel IP-adres gebruiken"
#: preferencesdialog.cpp:5717
#, fuzzy
msgid "%1 empty"
msgstr "PSK is leeg"
#: preferencesdialog.cpp:5732 preferencesdialog.cpp:5733
#, fuzzy
msgid "No hostname/IP address (ping host) entered!"
msgstr "Geen IP-adres (ping host) gegeven"
#: preferencesdialog.cpp:5732
#, fuzzy
msgid "No hostname/IP address"
msgstr "Geen IP-adres"
#: preferencesdialog.cpp:5849
#, fuzzy
msgid "HTTP proxy server can't be empty!"
msgstr "HTTP-proxy mag niet leeg zijn."
#: preferencesdialog.cpp:5849
#, fuzzy
msgid "Empty HTTP proxy server"
msgstr "Lege HTTP-proxyhost"
#: preferencesdialog.cpp:5861
msgid "Password for HTTP proxy authentication can't be empty!"
msgstr "Wachtwoord voor HTTP-proxy-authenticatie mag niet leeg zijn"
#: preferencesdialog.cpp:5861
msgid "Empty HTTP proxy password for authentication"
msgstr "Leeg HTTP-proxy-wachtwoord voor authenticatie"
#: preferencesdialog.cpp:5869
msgid "Username for HTTP proxy authentication can't be empty!"
msgstr "Gebruikersnaam voor HTTP-proxy-authenticatie mag niet leeg zijn"
#: preferencesdialog.cpp:5869
msgid "Empty HTTP proxy username for authentication"
msgstr "Lege HTTP-proxy-gebruikersnaam voor authenticatie"
#: preferencesdialog.cpp:5913
msgid "No Server Certificate"
msgstr "Geen servercertificaat"
#: preferencesdialog.cpp:6146
msgid "New profile"
msgstr "Nieuw profiel"
#: preferencesdialog.cpp:6193
msgid "New created profile \"%1\" found in profile list."
msgstr ""
#: preferencesdialog.cpp:6233
msgid ""
"Profile \"%1\" added.\n"
"Now set the right type,\n"
" fill in the fields\n"
"and press \"Save\" to complete the profile."
msgstr ""
"Profiel \"%1\" toegevoegd.\n"
"Vul de rechter velden in\n"
"en klik op \"Opslaan\" om het profiel op te slaan"
#: preferencesdialog.cpp:6233
msgid "Complete Profile"
msgstr "Compleet profiel"
# (d/t) issue
#: preferencesdialog.cpp:6256
msgid "Creation of the new profile canceled."
msgstr "Aanmaken van nieuw profiel geannuleerd."
#: preferencesdialog.cpp:6269
msgid "Enter new name for profile:"
msgstr "Nieuwe naam voor profiel:"
#: preferencesdialog.cpp:6272 preferencesdialog.cpp:6273
msgid "Blanks are not allowed in profile names!"
msgstr "U mag geen spaties gebruiken in profielnamen."
#: preferencesdialog.cpp:6272
msgid "Illegal Character in Name"
msgstr "Illegaal letterteken in naam"
#: preferencesdialog.cpp:7024
msgid ""
"Do you really want disable the use of TDEWallet? KVpnc will save passwords "
"and psk in config file if requested."
msgstr ""
#: preferencesdialog.cpp:7024
#, fuzzy
msgid "Disable TDEWallet?"
msgstr "TDEWallet gebr&uiken"
#: preferencesdialog.cpp:7095
#, fuzzy, c-format
msgid "vpnc capabilities: %1"
msgstr "vpnc: %1"
#: preferencesdialog.cpp:7096 toolinfo.cpp:345 toolsinfodialog.cpp:79
#, fuzzy
msgid "openssl (certificate) support"
msgstr "Pad naar CA-certificaat"
#: profileipsecoptions.cpp:114
msgid ""
"IPSec IKE algorithmsYou have to specify the IKE values in the "
"following format:\n"
"<encryption algorithm>-<authentication algorithm>\n"
"or\n"
"<encryption algorithm>-<authentication algorithm>-<"
"diffie helman group> "
msgstr ""
#: profileipsecoptions.cpp:121
msgid ""
"IPSec ESP algorithmsYou have to specify the ESP values in the "
"following format:\n"
"<encryption algorithm>-<authentication algorithm>\n"
"or\n"
"<encryption algorithm>-<authentication algorithm>"
msgstr ""
#: profilemanagerbase.cpp:50
msgid "Profile Manager"
msgstr "Profielbeheer"
#: profilenetworkrouteoptions.cpp:119
#, fuzzy
msgid "Edit Network Route..."
msgstr "Netwerkroute toevoegen..."
#: profilenetworkrouteoptions.cpp:200 profilenetworkrouteoptions.cpp:213
#, fuzzy
msgid "&Edit..."
msgstr "&Route toevoegen..."
#: toolinfo.cpp:45
msgid "No info"
msgstr "Geen info"
#: toolinfo.cpp:201 toolinfo.cpp:267
#, fuzzy
msgid "Unable to start collectToolInfo process (%1)!"
msgstr "Kan een proces niet starten (%1)!"
#: toolinfo.cpp:620 toolsinfodialog.cpp:157
msgid "pkcs11 support"
msgstr "pcks11-ondersteuning"
#: toolsinfodialog.cpp:73 toolsinfodialog.cpp:78
msgid "good"
msgstr ""
#: toolsinfodialog.cpp:74 toolsinfodialog.cpp:82 vpntypesinfodialog.cpp:140
#, fuzzy
msgid "no certificate support"
msgstr "Pad naar CA-certificaat"
#: toolsinfodialog.cpp:80
#, fuzzy
msgid "hybrid support"
msgstr "Ondersteuning voor PKCS&11 smartcard activeren"
#: toolsinfodialog.cpp:112 toolsinfodialog.cpp:119 toolsinfodialog.cpp:121
#, fuzzy
msgid "kernel %1 support"
msgstr "pcks11-ondersteuning"
#: toolsinfodialog.cpp:113 toolsinfodialog.cpp:122 toolsinfodialog.cpp:161
#, fuzzy
msgid "smartcard support"
msgstr "Ondersteuning voor PKCS&11 smartcard activeren"
#: toolsinfodialog.cpp:118 toolsinfodialog.cpp:134
msgid "no aggressive mode"
msgstr "geen agressieve modus"
#: toolsinfodialog.cpp:346
msgid "unuseable"
msgstr ""
#: toolsinfodialog.cpp:347
#, fuzzy
msgid "no vpn support"
msgstr "geen gesplitste dns-ondersteuning"
#: toolsinfodialog.cpp:397 toolsinfodialog.cpp:463
#, fuzzy
msgid "ipsec-tools (racoon)"
msgstr "ipsec-tools debug-niveau"
#: toolsinfodialog.cpp:413
msgid "VTun"
msgstr ""
#: toolsinfodialog.cpp:421
#, fuzzy
msgid "Smartcard support"
msgstr "Ondersteuning voor PKCS&11 smartcard activeren"
#: toolsinfodialog.cpp:459
#, fuzzy
msgid "Certificate support"
msgstr "Pad naar CA-certificaat"
#: configdaemonoptionsbase.ui:1751 toolsinfodialog.cpp:471
#: toolsinfodialog.cpp:475 toolsinfodialog.cpp:479
#, no-c-format
msgid "L2TP"
msgstr ""
#: toolsinfodialog.cpp:483 toolsinfodialog.cpp:499
#, fuzzy
msgid "ipsec (Openswan, strongSwan, racoon)"
msgstr "FreeS/WAN (Openswan)"
#: toolsinfodialog.cpp:487 toolsinfodialog.cpp:491 toolsinfodialog.cpp:495
#: vpntypesinfodialog.cpp:396
msgid "SSH VPN"
msgstr ""
#: utils.cpp:292
#, fuzzy
msgid "\"%1\" begin."
msgstr "\"%1\" voltooid."
#: utils.cpp:301
msgid "Chmod of %1 failed!"
msgstr "Chmod van %1 is mislukt"
#: utils.cpp:308
msgid "chmod of %1 (%2) started."
msgstr "chmod van %1 (%2) is gestart."
#: utils.cpp:314
#, fuzzy
msgid "chmod of %1 (%2) running."
msgstr "chmod van %1 (%2) is gestart."
#: utils.cpp:625
#, fuzzy
msgid "pppd version (major): \"%1\""
msgstr "vpnc-versie (hoofd): \"%1\""
#: utils.cpp:626
#, fuzzy
msgid "pppd version (minor): \"%1\""
msgstr "vpn-versie (sub): \"%1\""
#: utils.cpp:627
#, fuzzy
msgid "pppd version (subminor): \"%1\""
msgstr "vpn-versie (sub/sub): \"%1\""
#: utils.cpp:635
msgid "pppd version is lower than 2.4.0"
msgstr ""
#: utils.cpp:655
msgid "pppd version is 2.4.0"
msgstr ""
#: utils.cpp:695
msgid "pppd version is >= 2.4.2, good"
msgstr ""
#: utils.cpp:751
#, fuzzy
msgid "Test require-mppe support of pppd"
msgstr "MPPE-ondersteuning van pppd (%1) testen"
#: utils.cpp:798
#, fuzzy
msgid "Test mppe required support of pppd"
msgstr "MPPE-ondersteuning van pppd (%1) testen"
#: utils.cpp:841
#, fuzzy
msgid " %1 has MPPE support."
msgstr "%1 heeft geen ondersteuning voor MPPE. Deze is nodig."
#: utils.cpp:846
#, fuzzy
msgid " %1 has no MPPE support."
msgstr "%1 heeft geen ondersteuning voor MPPE. Deze is nodig."
#: utils.cpp:867
msgid "Test support of replacedefaultroute pppd"
msgstr ""
#: utils.cpp:882 utils.cpp:887
#, fuzzy, c-format
msgid "Test support of replacedefaultroute pppd: %1"
msgstr "MPPE-ondersteuning van pppd (%1) testen"
#: utils.cpp:882 utils.cpp:1590
#, fuzzy
msgid "succeded"
msgstr "succes"
#: utils.cpp:887 utils.cpp:1584
#, fuzzy
msgid "failed"
msgstr "Profiel"
#: utils.cpp:1013
#, fuzzy
msgid "%1 cant be opened!"
msgstr "Logbestand kan niet worden geopend!"
#: utils.cpp:1127
msgid "Unable to fetch smartcard slots via pkcs11-tool!"
msgstr ""
#: utils.cpp:1133
msgid "Fetch smartcard slots via pkcs11-tool started."
msgstr ""
#: utils.cpp:1144
msgid "Fetch smartcard slots via pkcs11-tool finished."
msgstr ""
#: utils.cpp:1219
#, fuzzy, c-format
msgid "type: %1"
msgstr "type: %1\n"
#: utils.cpp:1521
#, fuzzy
msgid "%1 has no MPPE support using \"require mppe\"."
msgstr "%1 heeft ondersteuning voor MPPE en gebruikt de nieuwe stijl"
#: utils.cpp:1533
#, fuzzy
msgid "%1 has MPPE support and uses require mppe."
msgstr "%1 heeft ondersteuning voor MPPE en gebruikt de nieuwe stijl"
#: utils.cpp:1554
#, fuzzy
msgid "%1 has no MPPE support using \"mppe-required\"."
msgstr "%1 heeft ondersteuning voor MPPE en gebruikt de nieuwe stijl"
#: utils.cpp:1566
#, fuzzy
msgid "%1 has MPPE support and uses mppe-required."
msgstr "%1 heeft ondersteuning voor MPPE en gebruikt de nieuwe stijl"
#: utils.cpp:1584 utils.cpp:1590
#, fuzzy
msgid "Testing %1: %2"
msgstr "UDP wordt gebruikt"
#: vpntypesinfodialog.cpp:81
msgid "Requirements:"
msgstr ""
#: vpntypesinfodialog.cpp:98
#, fuzzy
msgid "VPN type"
msgstr "Importtype:"
#: toolsinfowidgetbase.ui:44 vpntypesinfodialog.cpp:99
#, no-c-format
msgid "State"
msgstr "Status"
#: vpntypesinfodialog.cpp:100
msgid "Requirements"
msgstr ""
#: toolsinfowidgetbase.ui:99 vpntypesinfodialog.cpp:101
#, no-c-format
msgid "Comment"
msgstr "Toelichting"
#: vpntypesinfodialog.cpp:103
#, fuzzy
msgid "The following information about the VPN tyes has been collected:"
msgstr "De volgende informatie over de hulpmiddelen is verzameld:"
#: vpntypesinfodialog.cpp:121
#, fuzzy
msgid "Cisco VPN"
msgstr "Cisco"
#: vpntypesinfodialog.cpp:130 vpntypesinfodialog.cpp:172
#: vpntypesinfodialog.cpp:216 vpntypesinfodialog.cpp:264
#: vpntypesinfodialog.cpp:310 vpntypesinfodialog.cpp:368
#: vpntypesinfodialog.cpp:407
#, fuzzy
msgid "%1 found"
msgstr "Niet gevonden"
#: vpntypesinfodialog.cpp:130 vpntypesinfodialog.cpp:172
#: vpntypesinfodialog.cpp:216 vpntypesinfodialog.cpp:264
#: vpntypesinfodialog.cpp:310 vpntypesinfodialog.cpp:368
#: vpntypesinfodialog.cpp:407
msgid "all tools"
msgstr ""
#: vpntypesinfodialog.cpp:135 vpntypesinfodialog.cpp:177
#: vpntypesinfodialog.cpp:221 vpntypesinfodialog.cpp:269
#: vpntypesinfodialog.cpp:315
#, fuzzy
msgid "%1 missing"
msgstr "Hulpprogramma ontbreekt"
#: vpntypesinfodialog.cpp:135 vpntypesinfodialog.cpp:177
#: vpntypesinfodialog.cpp:221 vpntypesinfodialog.cpp:269
#: vpntypesinfodialog.cpp:315 vpntypesinfodialog.cpp:373
msgid "some tools"
msgstr ""
#: vpntypesinfodialog.cpp:144
#, fuzzy
msgid "certificate support only with vpnclient (original Cisco client)"
msgstr "Pad naar CA-certificaat"
#: vpntypesinfodialog.cpp:148
msgid "hybrid support only if vpnc compiled with OpenSSL support"
msgstr ""
#: vpntypesinfodialog.cpp:151 vpntypesinfodialog.cpp:193
#: vpntypesinfodialog.cpp:243 vpntypesinfodialog.cpp:285
#: vpntypesinfodialog.cpp:347 vpntypesinfodialog.cpp:385
#: vpntypesinfodialog.cpp:419
msgid "and"
msgstr ""
#: vpntypesinfodialog.cpp:162
#, fuzzy
msgid "IPsec VPN"
msgstr "IPSec-id:"
#: vpntypesinfodialog.cpp:182 vpntypesinfodialog.cpp:320
#, fuzzy
msgid "FreeS/WAN detected, please upgrade to Openswan/strongSwan"
msgstr "FreeS/WAN (Openswan)"
#: vpntypesinfodialog.cpp:186 vpntypesinfodialog.cpp:324
#, fuzzy
msgid "Openswan detected, no smartcard support"
msgstr "Ondersteuning voor PKCS&11 smartcard activeren"
#: vpntypesinfodialog.cpp:190 vpntypesinfodialog.cpp:328
#: vpntypesinfodialog.cpp:334 vpntypesinfodialog.cpp:339
#: vpntypesinfodialog.cpp:344
#, fuzzy
msgid "%1 detected"
msgstr "\"%1\" is gestart."
#: vpntypesinfodialog.cpp:204
#, fuzzy
msgid "Microsoft PPTP VPN"
msgstr "&Microsoft PPTP"
#: vpntypesinfodialog.cpp:207
msgid "MPPE extensions in kernel"
msgstr ""
#: vpntypesinfodialog.cpp:226 vpntypesinfodialog.cpp:230
#: vpntypesinfodialog.cpp:274 vpntypesinfodialog.cpp:278
#: vpntypesinfodialog.cpp:378 vpntypesinfodialog.cpp:382
#: vpntypesinfodialog.cpp:413 vpntypesinfodialog.cpp:415
#, fuzzy
msgid "%1 is missing"
msgstr "Hulpprogramma ontbreekt"
#: vpntypesinfodialog.cpp:235 vpntypesinfodialog.cpp:241
#: vpntypesinfodialog.cpp:282 vpntypesinfodialog.cpp:373
#, fuzzy
msgid "%1 are missing"
msgstr "Hulpprogramma ontbreekt"
#: vpntypesinfodialog.cpp:235
msgid "pptpclient and pppd"
msgstr ""
#: vpntypesinfodialog.cpp:241
#, fuzzy
msgid "MPPE support"
msgstr "%1 heeft geen ondersteuning voor MPPE. Deze is nodig."
#: vpntypesinfodialog.cpp:254
#, fuzzy
msgid "OpenVPN SSL-VPN"
msgstr "OpenVNC"
#: vpntypesinfodialog.cpp:282
#, fuzzy
msgid "openvpn and openssl"
msgstr "openvpn debug-niveau"
#: vpntypesinfodialog.cpp:296
msgid "L2TP over IPSec"
msgstr ""
#: configdaemonoptionsbase.ui:1781 vpntypesinfodialog.cpp:334
#, no-c-format
msgid "l2tpd"
msgstr ""
#: configdaemonoptionsbase.ui:1934 vpntypesinfodialog.cpp:339
#, no-c-format
msgid "xl2tpd"
msgstr ""
#: newprofilewizardpptp.ui:477 profilepptpoptionsbase.ui:489
#: vpntypesinfodialog.cpp:344
#, fuzzy, no-c-format
msgid "openl2tp"
msgstr "openssl"
#: vpntypesinfodialog.cpp:358
msgid "Vtun VPN"
msgstr ""
#: vpntypesinfodialog.cpp:415
#, fuzzy
msgid "Password entry tool"
msgstr "Wachtwoord is leeg"
#: addnetworkroutedialogbase.ui:16
#, no-c-format
msgid "Add Network Route"
msgstr "Netwerkroute toevoegen"
#: addnetworkroutedialogbase.ui:52 newprofiledialogbase.ui:206
#: newprofilewizardnetwork.ui:123 profilenetworkgeneraloptionsbase.ui:418
#, no-c-format
msgid "Remote network:"
msgstr "Remote-netwerk:"
#: addnetworkroutedialogbase.ui:60 newprofiledialogbase.ui:515
#: newprofilewizardnetwork.ui:139 profilenetworkgeneraloptionsbase.ui:434
#, no-c-format
msgid "Remote network address"
msgstr "Adres remote-netwerk"
#: addnetworkroutedialogbase.ui:63 newprofilewizardnetwork.ui:142
#: profilenetworkgeneraloptionsbase.ui:437
#, no-c-format
msgid ""
"This is the remote network where the connection should going to. Use this at "
"a PPTP connection for set another network than the retrieved IP is located."
msgstr ""
"Dit is het remote netwerk waar de verbinding naar toegaat. Gebruik dit voor "
"een PPTP-verbinding ingesteld op een ander netwerk dan waar het ontvangen IP-"
"adres zich bevindt."
#: addnetworkroutedialogbase.ui:71 newprofiledialogbase.ui:526
#: newprofilewizardnetwork.ui:150 profilenetworkgeneraloptionsbase.ui:445
#, no-c-format
msgid "/"
msgstr "/"
#: addnetworkroutedialogbase.ui:77 newprofilewizardnetwork.ui:156
#: profilenetworkgeneraloptionsbase.ui:451
#, no-c-format
msgid "8"
msgstr "8"
#: addnetworkroutedialogbase.ui:82 newprofilewizardnetwork.ui:161
#: profilenetworkgeneraloptionsbase.ui:456
#, no-c-format
msgid "9"
msgstr "9"
#: addnetworkroutedialogbase.ui:87 newprofiledialogbase.ui:532
#: newprofilewizardnetwork.ui:166 profilenetworkgeneraloptionsbase.ui:461
#, no-c-format
msgid "10"
msgstr "10"
#: addnetworkroutedialogbase.ui:92 newprofiledialogbase.ui:537
#: newprofilewizardnetwork.ui:171 profilenetworkgeneraloptionsbase.ui:466
#, no-c-format
msgid "11"
msgstr "11"
#: addnetworkroutedialogbase.ui:97 newprofiledialogbase.ui:542
#: newprofilewizardnetwork.ui:176 profilenetworkgeneraloptionsbase.ui:471
#, no-c-format
msgid "12"
msgstr "12"
#: addnetworkroutedialogbase.ui:102 newprofiledialogbase.ui:547
#: newprofilewizardnetwork.ui:181 profilenetworkgeneraloptionsbase.ui:476
#, no-c-format
msgid "13"
msgstr "13"
#: addnetworkroutedialogbase.ui:107 newprofiledialogbase.ui:552
#: newprofilewizardnetwork.ui:186 profilenetworkgeneraloptionsbase.ui:481
#, no-c-format
msgid "14"
msgstr "14"
#: addnetworkroutedialogbase.ui:112 newprofiledialogbase.ui:557
#: newprofilewizardnetwork.ui:191 profilenetworkgeneraloptionsbase.ui:486
#, no-c-format
msgid "15"
msgstr "15"
#: addnetworkroutedialogbase.ui:117 newprofiledialogbase.ui:562
#: newprofilewizardnetwork.ui:196 profilenetworkgeneraloptionsbase.ui:491
#, no-c-format
msgid "16"
msgstr "16"
#: addnetworkroutedialogbase.ui:122 newprofiledialogbase.ui:567
#: newprofilewizardnetwork.ui:201 profilenetworkgeneraloptionsbase.ui:496
#, no-c-format
msgid "17"
msgstr "17"
#: addnetworkroutedialogbase.ui:127 newprofiledialogbase.ui:572
#: newprofilewizardnetwork.ui:206 profilenetworkgeneraloptionsbase.ui:501
#, no-c-format
msgid "18"
msgstr "18"
#: addnetworkroutedialogbase.ui:132 newprofiledialogbase.ui:577
#: newprofilewizardnetwork.ui:211 profilenetworkgeneraloptionsbase.ui:506
#, no-c-format
msgid "19"
msgstr "19"
#: addnetworkroutedialogbase.ui:137 newprofiledialogbase.ui:582
#: newprofilewizardnetwork.ui:216 profilenetworkgeneraloptionsbase.ui:511
#, no-c-format
msgid "20"
msgstr "20"
#: addnetworkroutedialogbase.ui:142 newprofiledialogbase.ui:587
#: newprofilewizardnetwork.ui:221 profilenetworkgeneraloptionsbase.ui:516
#, no-c-format
msgid "21"
msgstr "21"
#: addnetworkroutedialogbase.ui:147 newprofiledialogbase.ui:592
#: newprofilewizardnetwork.ui:226 profilenetworkgeneraloptionsbase.ui:521
#, no-c-format
msgid "22"
msgstr "22"
#: addnetworkroutedialogbase.ui:152 newprofiledialogbase.ui:597
#: newprofilewizardnetwork.ui:231 profilenetworkgeneraloptionsbase.ui:526
#, no-c-format
msgid "23"
msgstr "23"
#: addnetworkroutedialogbase.ui:157 newprofiledialogbase.ui:602
#: newprofilewizardnetwork.ui:236 profilenetworkgeneraloptionsbase.ui:531
#, no-c-format
msgid "24"
msgstr "24"
#: addnetworkroutedialogbase.ui:162 newprofiledialogbase.ui:612
#: newprofilewizardnetwork.ui:241 profilenetworkgeneraloptionsbase.ui:536
#, no-c-format
msgid "25"
msgstr "25"
#: addnetworkroutedialogbase.ui:167 newprofiledialogbase.ui:607
#: newprofilewizardnetwork.ui:246 profilenetworkgeneraloptionsbase.ui:541
#, no-c-format
msgid "26"
msgstr "26"
#: addnetworkroutedialogbase.ui:172 newprofiledialogbase.ui:617
#: newprofilewizardnetwork.ui:251 profilenetworkgeneraloptionsbase.ui:546
#, no-c-format
msgid "27"
msgstr "27"
#: addnetworkroutedialogbase.ui:177 newprofiledialogbase.ui:622
#: newprofilewizardnetwork.ui:256 profilenetworkgeneraloptionsbase.ui:551
#, no-c-format
msgid "28"
msgstr "28"
#: addnetworkroutedialogbase.ui:182 newprofiledialogbase.ui:627
#: newprofilewizardnetwork.ui:261 profilenetworkgeneraloptionsbase.ui:556
#, no-c-format
msgid "29"
msgstr "29"
#: addnetworkroutedialogbase.ui:187 newprofiledialogbase.ui:632
#: newprofilewizardnetwork.ui:266 profilenetworkgeneraloptionsbase.ui:561
#, no-c-format
msgid "30"
msgstr "30"
#: addnetworkroutedialogbase.ui:192 newprofilewizardnetwork.ui:271
#: profilenetworkgeneraloptionsbase.ui:566
#, no-c-format
msgid "31"
msgstr "31"
#: addnetworkroutedialogbase.ui:197 newprofiledialogbase.ui:637
#: newprofilewizardnetwork.ui:276 profilenetworkgeneraloptionsbase.ui:571
#, no-c-format
msgid "32"
msgstr "32"
#: addnetworkroutedialogbase.ui:207
#, no-c-format
msgid "Prefix (netmask) of the remote network"
msgstr "Voorvoegsel (netmasker) voor het remote netwerk"
#: addnetworkroutedialogbase.ui:210
#, no-c-format
msgid ""
"This is the netmask of the remote network. The value describes how many bits "
"are used for the network part. For example /24 stands for the netmask "
"255.255.255.0 (3*8 bits)"
msgstr ""
"Dit is het netmasker van het remote netwerk. Deze waarde beschrijft hoeveel "
"bits er gebruikt worden voor het netwerkgedeelte. Bijv. /24 staat voor het "
"netmasker 255.255.255.0 (3*8 bits)"
#: addnetworkroutedialogbase.ui:228
#, fuzzy, no-c-format
msgid "Use gatewa&y"
msgstr "&Gateway gebruiken"
#: addnetworkroutedialogbase.ui:231 advancedprofiledialogbase.ui:72
#: configdaemonoptionsbase.ui:648 newprofilewizardauthselection.ui:41
#: newprofilewizardciscoselection.ui:55 newprofilewizardfreeswan.ui:696
#: newprofilewizardopenvpn.ui:194 newprofilewizardopenvpnauth.ui:107
#: newprofilewizardp12certselection.ui:85 newprofilewizardpptp.ui:224
#: newprofilewizardracoon.ui:94 newprofilewizardtypeselection.ui:145
#: profilecertoptionsbase.ui:637 profileciscooptionsbase.ui:545
#: profileciscooptionsbase.ui:693 profileipsecoptionsbase.ui:336
#: profilenetworkgeneraloptionsbase.ui:884
#: profilenetworkhttpproxyoptionsbase.ui:46
#: profilenetworkhttpproxyoptionsbase.ui:337 profileopenvpnoptionsbase.ui:626
#: profilepptpoptionsbase.ui:266 profileracoonoptionsbase.ui:211
#: profilesshoptionsbase.ui:278
#, no-c-format
msgid "Alt+Y"
msgstr "Alt+Y"
#: addnetworkroutedialogbase.ui:234 addnetworkroutedialogbase.ui:292
#, no-c-format
msgid "Use the gateway to reach this network"
msgstr "Gebruik de gateway om dit netwerk te bereiken"
#: addnetworkroutedialogbase.ui:265
#, no-c-format
msgid "Gateway address"
msgstr "Gateway-adres"
#: addnetworkroutedialogbase.ui:286
#, fuzzy, no-c-format
msgid "Use &interface"
msgstr "Standaardinterface: %1"
#: addnetworkroutedialogbase.ui:289 advancedprofiledialogbase.ui:86
#: kvpncimportprofileselectiondialogbase.ui:190 manageciscocertbase.ui:152
#: newprofiledialogbase.ui:85 newprofilewizardciscoselection.ui:41
#: newprofilewizardracoon.ui:281 newprofilewizardtypeselection.ui:134
#: profileciscooptionsbase.ui:468 profileracoonoptionsbase.ui:287
#, no-c-format
msgid "Alt+I"
msgstr "Alt+I"
#: advancedprofiledialogbase.ui:16 advancedprofilesettingsdialogbase.ui:16
#: advancedprofilesettingsdialogbase.ui:49
#, no-c-format
msgid "Advanced Profile Settings"
msgstr "Geavanceerde profielinstellingen"
#: advancedprofiledialogbase.ui:27
#, no-c-format
msgid "&Enable advanced settings"
msgstr "Geavanceerde instellingen activ&eren"
#: advancedprofiledialogbase.ui:30
#, no-c-format
msgid "Alt+E"
msgstr "Alt+E"
#: advancedprofiledialogbase.ui:33
#, no-c-format
msgid "Enable advanced settings for profile"
msgstr "Activeer geavanceerde instellingen voor profiel"
#: advancedprofiledialogbase.ui:58
#, no-c-format
msgid "Advanced profile settings"
msgstr "Geavanceerde profielinstellingen"
#: advancedprofiledialogbase.ui:69 profileciscooptionsbase.ui:690
#, fuzzy, no-c-format
msgid "Allow single DES encr&yption"
msgstr "Enkelvoudige DES-versleuteling toe&staan"
#: advancedprofiledialogbase.ui:75 profileciscooptionsbase.ui:696
#, no-c-format
msgid "Allow single DES encryption (insecure)"
msgstr "Enkelvoudige DES-versleuteling toestaan (onveilig)"
#: advancedprofiledialogbase.ui:83 newprofilewizardracoon.ui:278
#: profileciscooptionsbase.ui:465 profileracoonoptionsbase.ui:284
#, no-c-format
msgid "&IKE DH group:"
msgstr "&IKE DH-groep:"
#: advancedprofiledialogbase.ui:89 newprofilewizardracoon.ui:284
#: profileciscooptionsbase.ui:471 profileracoonoptionsbase.ui:290
#, no-c-format
msgid "Use special Diffie Hellman group"
msgstr "Speciale Diffie Hellman-groep gebruiken"
#: advancedprofiledialogbase.ui:100 configdaemonoptionsbase.ui:99
#: configgeneraloptions.ui:64 enterxauthinteractivepasscodedialogbase.ui:46
#: importcertificatedialogbase.ui:241 newprofilewizardconnectoptions.ui:46
#: newprofilewizardfreeswan.ui:57 newprofilewizardfreeswan.ui:126
#: newprofilewizardopenvpnauth.ui:63 newprofilewizardpptp.ui:341
#: newprofilewizardracoon.ui:441 profilecertoptionsbase.ui:125
#: profileciscooptionsbase.ui:346 profilegeneraloptionsbase.ui:183
#: profileipsecoptionsbase.ui:374 profileopenvpnoptionsbase.ui:689
#: profileracoonoptionsbase.ui:818 profilesshoptionsbase.ui:170
#: profileuseroptionsbase.ui:254
#, no-c-format
msgid "Alt+W"
msgstr "Alt+W"
#: advancedprofiledialogbase.ui:103 newprofilewizardfreeswan.ui:129
#: newprofilewizardracoon.ui:97 profileciscooptionsbase.ui:349
#: profileipsecoptionsbase.ui:183 profileracoonoptionsbase.ui:214
#, no-c-format
msgid "Use perfect forward secrety (PFS)"
msgstr "Perfect forward secrety (PFS) gebruiken"
#: advancedprofiledialogbase.ui:111 profileciscooptionsbase.ui:100
#, no-c-format
msgid "Application &version:"
msgstr "Programma&versie:"
#: advancedprofiledialogbase.ui:114 newprofiledialogbase.ui:44
#: newprofilewizardpsk.ui:57 newprofilewizardtypeselection.ui:112
#: newprofilewizardtypeselection.ui:156 newprofilewizarduser.ui:187
#: profileciscooptionsbase.ui:103 profilegeneraloptionsbase.ui:155
#: profilepskoptionsbase.ui:227
#, no-c-format
msgid "Alt+V"
msgstr "Alt+V"
#: advancedprofiledialogbase.ui:117 profileciscooptionsbase.ui:106
#, no-c-format
msgid "Send an own application version string"
msgstr "Stuur een eigen programmaversietekst"
#: advancedprofiledialogbase.ui:125 newprofilewizardracoon.ui:314
#: profileciscooptionsbase.ui:377 profileipsecoptionsbase.ui:211
#: profileracoonoptionsbase.ui:320
#, no-c-format
msgid "Diffie Helman group for Perfect Forward Secrecy"
msgstr "Diffie Helman-groep voor Perfect Forward Secrecy"
#: advancedprofiledialogbase.ui:129 newprofilewizardracoon.ui:318
#: profileciscooptionsbase.ui:381 profileipsecoptionsbase.ui:215
#: profileracoonoptionsbase.ui:324
#, no-c-format
msgid ""
"This is the Diffie Helman group for PFS.\n"
"The following assignment will is used:\n"
"server = DH group is recieved from server (cisco only)\n"
"nopfs = no pfs is used\n"
"dh1 = modp768\n"
"dh2 = modp1024\n"
"dh5 = modp1536\n"
"d14 = modp2048 (racoon only)\n"
"dh15= modp3072 (racoon only)\n"
"dh16 = modp4096 (racoon only)\n"
"dh17 = modp6144 (racoon only)\n"
"dh18 = modp8192 (racoon only)"
msgstr ""
"Dit is de Diffie Helman-groep voor PFS.\n"
"De volgende toewijzing zal worden gebruikt:\n"
"server = DH-groep wordt ontvangen van de server (alleen Cisco)\n"
"nopfs = er wordt geen pfs gebruikt\n"
"dh1 = modp768\n"
"dh2 = modp1024\n"
"dh5 = modp1536\n"
"d14 = modp2048 (alleen racoon)\n"
"dh15= modp3072 (alleenracoon)\n"
"dh16 = modp4096 (alleen racoon)\n"
"dh17 = modp6144 (alleen racoon)\n"
"dh18 = modp8192 (alleen racoon)"
#: advancedprofiledialogbase.ui:148 advancedprofilesettingsdialogbase.ui:374
#: newprofilewizardracoon.ui:208 profileciscooptionsbase.ui:499
#: profileracoonoptionsbase.ui:346
#, no-c-format
msgid "Diffie Hellman group"
msgstr "Diffie Hellman-groep"
#: advancedprofiledialogbase.ui:151 newprofilewizardracoon.ui:211
#: profileciscooptionsbase.ui:502 profileracoonoptionsbase.ui:349
#, no-c-format
msgid ""
"This define the group used for the Diffie-Hellman exponentiations. The "
"following assignment is used:\n"
"dh1 = modp768\n"
"dh2 = modp1024\n"
"dh5 = modp1536\n"
"d14 = modp2048 (only racoon)\n"
"dh15 = modp3072 (only racoon)\n"
"dh16 = modp4096 (only racoon)\n"
"dh17 = modp6144 (only racoon)\n"
"dh18 = modp8192 (only racoon)"
msgstr ""
"Dit definieert de groep die gebruikt wordt voor de Diffie-Hellman "
"exponentiaties. De volgende toewijzing wordt gebruikt:\n"
"dh1 = modp768\n"
"dh2 = modp1024\n"
"dh5 = modp1536\n"
"d14 = modp2048 (alleen racoon)\n"
"dh15= modp3072 (alleenracoon)\n"
"dh16 = modp4096 (alleen racoon)\n"
"dh17 = modp6144 (alleen racoon)\n"
"dh18 = modp8192 (alleen racoon)"
#: advancedprofiledialogbase.ui:170 profileciscooptionsbase.ui:449
#, no-c-format
msgid "Application version string"
msgstr "Programmaversietekst"
#: advancedprofilesettingsdialogbase.ui:38
#, no-c-format
msgid "Enable advanced settings"
msgstr "Geavanceerde instellingen activeren"
#: advancedprofilesettingsdialogbase.ui:41
#, no-c-format
msgid "Check for use of advanced settings"
msgstr "Selecteer dit om geavanceerde instellingen te gebruiken"
#: advancedprofilesettingsdialogbase.ui:76
#, no-c-format
msgid "Local port:"
msgstr "Lokale poort:"
#: advancedprofilesettingsdialogbase.ui:79
#, no-c-format
msgid ""
"Check this if you want to specify an own local port for use with the tunnel"
msgstr ""
"Selecteer dit als u zelf een poort wilt opgeven om te gebruiken met de "
"tunnel."
#: advancedprofilesettingsdialogbase.ui:87
#, no-c-format
msgid "Enable single DES:"
msgstr "Enkelvoudige DES inschakelen:"
#: advancedprofilesettingsdialogbase.ui:90
#, no-c-format
msgid "Check for use of Single DES (insecure)"
msgstr "Selecteer dit om enkelvoudige DES te gebruiken (niet veilig)"
#: advancedprofilesettingsdialogbase.ui:106
#, no-c-format
msgid "Do not use deflate method"
msgstr "Geen deflate-methode gebruiken"
#: advancedprofilesettingsdialogbase.ui:109
#, no-c-format
msgid ""
"Check this for disabling deflate decompression method (disabled by default)"
msgstr ""
"Selecteer dit om de deflate decompressiemethode uit te schakelen (standaard "
"uitgeschakeld)"
#: advancedprofilesettingsdialogbase.ui:139
#, no-c-format
msgid "IP address of DNS server (no hostname)"
msgstr "IP-adres van DNS-server (geen hostnaam)"
#: advancedprofilesettingsdialogbase.ui:147
#, no-c-format
msgid "Domain name for authentication:"
msgstr "Domeinnaam voor authenticatie:"
#: advancedprofilesettingsdialogbase.ui:163
#, no-c-format
msgid "Allow MPPE stateful mode"
msgstr "MPPE statefull-modi toestaan"
#: advancedprofilesettingsdialogbase.ui:166 newprofilewizardpptp.ui:344
#: profilepptpoptionsbase.ui:95
#, no-c-format
msgid "Check this for allow stateful mode of MPPE"
msgstr "Selecteer dit om de stateful-modus van MPPE te gebruiken"
#: advancedprofilesettingsdialogbase.ui:193 newprofilewizardpptp.ui:310
#, no-c-format
msgid "Refuse &40 bit encryption"
msgstr "&40-bits versleuteling weigeren"
#: advancedprofilesettingsdialogbase.ui:196
#, no-c-format
msgid "Check this for refusing 40 bit length encryption of MPPE"
msgstr "Selecteer dit om 40-bits versleuteling van MPPE te weigeren"
#: advancedprofilesettingsdialogbase.ui:204 newprofilewizardpptp.ui:296
#: profilepptpoptionsbase.ui:75
#, no-c-format
msgid "Re&quire MPPE"
msgstr "MPPE &vereisen"
#: advancedprofilesettingsdialogbase.ui:207
#, no-c-format
msgid "Check this for use of MPPE encrpytion (enabled by default)"
msgstr "Selecteer dit om MPPE-versleuteling gebruiken (standaard ingeschakeld)"
#: advancedprofilesettingsdialogbase.ui:215
#, no-c-format
msgid "Get DNS server from peer"
msgstr "DNS-server ophalen van peer"
#: advancedprofilesettingsdialogbase.ui:218
#, no-c-format
msgid "Check this for retrieve DNS server from peer"
msgstr ""
"Selecteer dit om de DNS-server van een gelijkwaardige computer te halen"
#: advancedprofilesettingsdialogbase.ui:226
#, no-c-format
msgid "IKE DH group:"
msgstr "IKE DH-groep:"
#: advancedprofilesettingsdialogbase.ui:229
#, no-c-format
msgid "Check this for use a special Diffie Hellman group"
msgstr "Selecteer dit om een speciale Diffie Hellman-groep te gebruiken"
#: advancedprofilesettingsdialogbase.ui:240
#, no-c-format
msgid "Application string"
msgstr "Programmatekst"
#: advancedprofilesettingsdialogbase.ui:248
#, no-c-format
msgid "MTU"
msgstr "MTU"
#: advancedprofilesettingsdialogbase.ui:251
#, no-c-format
msgid "Check this for set a own MTU size"
msgstr "Selecteer dit om een eigen MTU-grootte op te geven"
#: advancedprofilesettingsdialogbase.ui:254 newprofilewizardnetwork.ui:312
#: newprofilewizardnetwork.ui:369 profilenetworkgeneraloptionsbase.ui:52
#, no-c-format
msgid "If you enable this you can set a own MTU size."
msgstr "Als u dit inschakelt, dan kunt u uw eigen MTU-grootte opgeven."
#: advancedprofilesettingsdialogbase.ui:270
#, no-c-format
msgid "Refuse EAP"
msgstr "EAP weigeren"
#: advancedprofilesettingsdialogbase.ui:273
#, no-c-format
msgid "Check this for refuse EAP"
msgstr "Selecteer dit om EAP te weigeren"
#: advancedprofilesettingsdialogbase.ui:300
#, no-c-format
msgid "Perfect forward secrec&y:"
msgstr "Perfect forward secrec&y:"
#: advancedprofilesettingsdialogbase.ui:303
#, no-c-format
msgid "Check this if you want to select perfect forward secrety method"
msgstr "Selecteer dit als u een perfect forward secrety-methode wilt uitkiezen"
#: advancedprofilesettingsdialogbase.ui:311
#, no-c-format
msgid "Application version:"
msgstr "Programmaversie:"
#: advancedprofilesettingsdialogbase.ui:314
#, no-c-format
msgid "Check if you want to send an own application version string"
msgstr ""
"Selecteer dit als u een eigen tekst voor de programmaversie wilt verzenden"
#: advancedprofilesettingsdialogbase.ui:336
#, no-c-format
msgid "The local port for use with tunnel"
msgstr "De lokale poort om met tunnel te gebruiken"
#: advancedprofilesettingsdialogbase.ui:363
#, no-c-format
msgid "Userdefinied DNS server:"
msgstr "Gebruikergedefinieerde DNS-server:"
#: advancedprofilesettingsdialogbase.ui:366
#, no-c-format
msgid "Check this for specify a own DNS server"
msgstr "Selecteer dit om zelf een DNS-server op te geven"
#: advancedprofilesettingsdialogbase.ui:382
#, no-c-format
msgid "Set default route"
msgstr "Standaardroute instellen"
#: advancedprofilesettingsdialogbase.ui:385
#, no-c-format
msgid "Check this for adding a new default route"
msgstr "Selecteer dit om een nieuwe standaardroute toe te voegen"
#: advancedprofilesettingsdialogbase.ui:401
#, no-c-format
msgid "Use global IPSec secret"
msgstr "Globaal IPSec-geheim gebruiken"
#: advancedprofilesettingsdialogbase.ui:404
#, no-c-format
msgid "Check for use global IPSec secret from /etc/vpnc/default.conf"
msgstr ""
"Selecteer dit voor het gebruiken van het globale IPSec-geheim uit /etc/vpnc/"
"default.conf"
#: advancedprofilesettingsdialogbase.ui:431 newprofilewizardpptp.ui:207
#: profilepptpoptionsbase.ui:274
#, no-c-format
msgid "Do not use BSD compression"
msgstr "Geen BSD-compressie gebruiken"
#: advancedprofilesettingsdialogbase.ui:434
#, no-c-format
msgid "Check this for refuse BSD compression (disabled by default)"
msgstr "Selecteer dit om BSD-compressie te weigeren (standaard uitgeschakeld)"
#: advancedprofilesettingsdialogbase.ui:459 newprofilewizardnetwork.ui:332
#: newprofilewizardnetwork.ui:389 profilenetworkgeneraloptionsbase.ui:72
#, no-c-format
msgid "The MTU size for the ppp connection"
msgstr "De MTU-grootte voor de ppp-verbinding"
#: advancedprofilesettingsdialogbase.ui:462 newprofilewizardnetwork.ui:335
#: newprofilewizardnetwork.ui:392 profilenetworkgeneraloptionsbase.ui:75
#, no-c-format
msgid "Here you can specify the MTU size for use with pppd."
msgstr "Hier kunt u de MTU-grootte om te gebruiken met pppd opgeven."
#: advancedprofilesettingsdialogbase.ui:502 newprofilewizardpptp.ui:324
#, no-c-format
msgid "Refuse 1&28 bit encryption"
msgstr "1&28-bits versleuteling weigeren"
#: advancedprofilesettingsdialogbase.ui:505
#, no-c-format
msgid "Check this for refusing 128 bit length encryption of MPPE"
msgstr "Selecteer dit om 128-bits versleuteling van MPPE te weigeren"
#: advancedprofilesettingsdialogbase.ui:532
#, no-c-format
msgid "(NT-) Domain name for authentication"
msgstr "(NT-)domeinnaam voor authenticatie"
#: advancedprofilesettingsdialogbase.ui:535
#, no-c-format
msgid "Check if domain name for authentication is needed"
msgstr "Selecteer dit als domeinnaam nodig is voor authenticatie"
#: advancedprofilesettingsdialogbase.ui:551 newprofilewizardnetworkroute.ui:54
#: profilenetworkrouteoptionsbase.ui:54
#, no-c-format
msgid "Replace default route"
msgstr "Standaardroute vervangen"
#: advancedprofilesettingsdialogbase.ui:554
#, no-c-format
msgid ""
"Check this for replacing the existing default route. Needs 'set default "
"route' enabled (warning: only for experts)."
msgstr ""
"Selecteer dit voor het vervangen van de bestaande standaardroute. Hiervoor "
"moet 'Standaardroute instellen' zijn ingeschakeld. (Waarschuwing: alleen "
"voor experts)."
#: advancedprofilesettingsdialogbase.ui:621
#, no-c-format
msgid "F1"
msgstr "F1"
#: advancedprofilesettingsdialogbase.ui:627
#, no-c-format
msgid "Click for more help"
msgstr "Klik voor meer help"
#: advancedprofilesettingsdialogbase.ui:664
#, no-c-format
msgid "Click for closing the dialog by accepting the settings"
msgstr "Klik om dit dialoog te sluiten en de wijzigingen te accepteren"
#: advancedprofilesettingsdialogbase.ui:681
#, no-c-format
msgid "Click for closing the dialog by canceling"
msgstr "Klik om de dialoog te sluiten en de wijzigingen te annuleren"
#: ciscocertificateenrollmentbase.ui:16
#, fuzzy, no-c-format
msgid "Certificate enrollment"
msgstr "Certificaatformaat"
#: ciscocertificateenrollmentbase.ui:35
#, no-c-format
msgid "Select your enrollment method:"
msgstr ""
#: ciscocertificateenrollmentbase.ui:43
#, no-c-format
msgid "Enrollment method"
msgstr ""
#: ciscocertificateenrollmentbase.ui:59
#, fuzzy, no-c-format
msgid "Fi&le"
msgstr "Geen bestand"
#: ciscocertificateenrollmentbase.ui:62 configdaemonoptionsbase.ui:65
#: kvpncimportprofileselectiondialogbase.ui:179 newprofilewizardcert.ui:427
#: newprofilewizardciscomanually.ui:111
#: newprofilewizardconnectionstatuscheck.ui:184 newprofilewizardfreeswan.ui:528
#: newprofilewizardnetworkroute.ui:208 newprofilewizardpsk.ui:181
#: newprofilewizardtypeselection.ui:79 profileciscooptionsbase.ui:144
#: profileipsecoptionsbase.ui:293 profilenetworkgeneraloptionsbase.ui:663
#: profilenetworkrouteoptionsbase.ui:225
#: profilenetworkvirtualipoptionsbase.ui:167 profileopenvpnoptionsbase.ui:81
#: profilepptpoptionsbase.ui:92 profilepskoptionsbase.ui:168
#: profilesmartcardoptionsbase.ui:373
#, no-c-format
msgid "Alt+L"
msgstr "Alt+L"
#: ciscocertificateenrollmentbase.ui:86
#, fuzzy, no-c-format
msgid "New password:"
msgstr " wachtwoord:"
#: ciscocertificateenrollmentbase.ui:128
#, fuzzy, no-c-format
msgid "Challenge password:"
msgstr " wachtwoord:"
#: ciscocertificateenrollmentbase.ui:136
#, no-c-format
msgid "CA domain:"
msgstr ""
#: ciscocertificateenrollmentbase.ui:144
#, no-c-format
msgid "CA URL:"
msgstr ""
#: ciscocertificateenrollmentbase.ui:152
#, fuzzy, no-c-format
msgid "Certificate authority:"
msgstr "Certificaatpad:"
#: ciscocertificateenrollmentbase.ui:163
#, no-c-format
msgid "File encoding:"
msgstr ""
#: ciscocertificateenrollmentbase.ui:174
#, fuzzy, no-c-format
msgid "Filename:"
msgstr "Bestandsnaam:"
#: ciscocertificateenrollmentbase.ui:190
#, no-c-format
msgid "Binary"
msgstr ""
#: ciscocertificateenrollmentbase.ui:195
#, no-c-format
msgid "Base64"
msgstr ""
#: ciscocertificateenrollmentbase.ui:210
#, no-c-format
msgid "&Online"
msgstr ""
#: ciscocertificateenrollmentbase.ui:213 configdaemonoptionsbase.ui:2240
#: newprofilewizardopenvpnselection.ui:41
#, no-c-format
msgid "Alt+O"
msgstr "Alt+O"
#: ciscocertificateenrollmentdatadialogbase.ui:16
#, fuzzy, no-c-format
msgid "Certificate details..."
msgstr "Certificaatinstellingen"
#: ciscocertificateenrollmentdatadialogbase.ui:51 displaycertdialogbase.ui:727
#, fuzzy, no-c-format
msgid "State (ST):"
msgstr "Status"
#: ciscocertificateenrollmentdatadialogbase.ui:86 displaycertdialogbase.ui:467
#, fuzzy, no-c-format
msgid "IP address:"
msgstr "Geen IP-adres"
#: ciscocertificateenrollmentdatadialogbase.ui:131 displaycertdialogbase.ui:579
#, no-c-format
msgid "Country (C):"
msgstr ""
#: ciscocertificateenrollmentdatadialogbase.ui:166 displaycertdialogbase.ui:397
#, no-c-format
msgid "Email (E):"
msgstr ""
#: ciscocertificateenrollmentdatadialogbase.ui:201 displaycertdialogbase.ui:362
#, no-c-format
msgid "Department (OU):"
msgstr ""
#: ciscocertificateenrollmentdatadialogbase.ui:241
#, no-c-format
msgid "Domain"
msgstr ""
#: ciscocertificateenrollmentdatadialogbase.ui:281 displaycertdialogbase.ui:797
#, no-c-format
msgid "Company:"
msgstr ""
#: ciscocertificateenrollmentdatadialogbase.ui:336 displaycertdialogbase.ui:59
#, no-c-format
msgid "Name (CN):"
msgstr ""
#: ciscocertificateenrollmentfinishwidgetbase.ui:16
#, fuzzy, no-c-format
msgid "Finished"
msgstr "Voltooien"
#: ciscocertificateenrollmentfinishwidgetbase.ui:27
#, fuzzy, no-c-format
msgid "ok."
msgstr "ok"
#: configconnectoptionsbase.ui:43
#, no-c-format
msgid "&Minimize after connect"
msgstr "&Minimaliseren na verbindingsopbouw"
#: configconnectoptionsbase.ui:46 newprofilewizardfreeswan.ui:98
#: newprofilewizardnetwork.ui:306 newprofilewizardopenvpnselection.ui:55
#: newprofilewizardp12certselection.ui:46 newprofilewizardpptp.ui:355
#: newprofilewizardtypeselection.ui:101 profilecertoptionsbase.ui:70
#: profileciscooptionsbase.ui:623
#: profilecmdexecafterdisconnectoptionsbase.ui:38
#: profilegeneraloptionsbase.ui:141 profileipsecoptionsbase.ui:247
#: profilenetworkgeneraloptionsbase.ui:46 profileopenvpnoptionsbase.ui:291
#: profilepptpoptionsbase.ui:134
#, no-c-format
msgid "Alt+M"
msgstr "Alt+M"
#: configconnectoptionsbase.ui:52
#, no-c-format
msgid "Hide main window after connect"
msgstr "Hoofdvenster verbergen na verbindingsopbouw"
#: configconnectoptionsbase.ui:55
#, no-c-format
msgid "Enable this to let kvpnc minimize in kicker after succesful connect."
msgstr ""
"Schakel dit in om kvpnc te minimaliseren in kicker na een succesvolle "
"verbindingsopbouw."
#: configconnectoptionsbase.ui:98
#, no-c-format
msgid "Use silent &quit"
msgstr "Stille afsluitin&g gebruiken"
#: configconnectoptionsbase.ui:101 configgeneraloptions.ui:108
#: newprofilewizardopenvpn.ui:410 newprofilewizardpptp.ui:299
#: newprofilewizardpptp.ui:416 profileopenvpnoptionsbase.ui:595
#: profilepptpoptionsbase.ui:78 profilepptpoptionsbase.ui:432
#, no-c-format
msgid "Alt+Q"
msgstr "Alt+Q"
#: configconnectoptionsbase.ui:104
#, no-c-format
msgid ""
"Enable exit without warning\n"
"about the active connecions"
msgstr ""
"Activeer afsluiten zonder te \n"
"waarschuwen over de actieve verbindingen."
#: configconnectoptionsbase.ui:157
#, no-c-format
msgid "Au&tomatically connect at startup:"
msgstr "Au&tomatisch verbinden bij opstarten:"
#: configconnectoptionsbase.ui:160 configdaemonoptionsbase.ui:907
#: configdebugoptionsbase.ui:198 mainviewbase.ui:73 newprofilewizarduser.ui:60
#: profilecmdexecbeforeconnectoptionsbase.ui:38
#: profilegeneraloptionsbase.ui:169 profilenetworknatoptionsbase.ui:132
#: profilenetworkvirtualipoptionsbase.ui:89 profileopenvpnoptionsbase.ui:722
#: profileuseroptionsbase.ui:68
#, no-c-format
msgid "Alt+T"
msgstr "Alt+T"
#: configconnectoptionsbase.ui:166
#, no-c-format
msgid "After startup initiate connection using selected profile"
msgstr ""
"Na het opstarten, initieer een verbinding met behulp van geselecteerd profiel"
#: configconnectoptionsbase.ui:191
#, no-c-format
msgid "Profile to connect at startup"
msgstr "Profiel om te verbinden na het opstarten"
#: configdaemonoptionsbase.ui:24
#, no-c-format
msgid "Daemon"
msgstr "Daemon"
#: configdaemonoptionsbase.ui:62
#, no-c-format
msgid "A&ll programs are in PATH"
msgstr "A&lle programma's staan in het zoekpad"
#: configdaemonoptionsbase.ui:71
#, no-c-format
msgid ""
"Search for programs on default places. Uncheck only in non standard "
"installations."
msgstr ""
"Zoek naar programma's op de standaardplekken. Deselecteer dit alleen in "
"niet-standaard installaties."
#: configdaemonoptionsbase.ui:96
#, no-c-format
msgid "Sho&w tunnel IP in tooltip"
msgstr "Tunnel-IP in tekstballon &tonen"
#: configdaemonoptionsbase.ui:102
#, no-c-format
msgid "Show retrieved IP address for tunnel in kvpnc icon tooltip"
msgstr ""
"Ontvangen IP-adres voor tunnel tonen in tekstballon van kvpnc-pictogram"
#: configdaemonoptionsbase.ui:118
#, no-c-format
msgid "vpnc (free client of Cisco VPN concentrators)"
msgstr "vpnc (vrije client van Cisco VPN concentrators)"
#: configdaemonoptionsbase.ui:148
#, no-c-format
msgid "vpnc"
msgstr "vpnc"
#: configdaemonoptionsbase.ui:190 configdaemonoptionsbase.ui:377
#: configdaemonoptionsbase.ui:564 configdaemonoptionsbase.ui:1019
#: configdaemonoptionsbase.ui:1203 configdaemonoptionsbase.ui:1300
#: configdaemonoptionsbase.ui:1636 configdaemonoptionsbase.ui:1823
#: configdaemonoptionsbase.ui:1976 configdaemonoptionsbase.ui:2182
#: configdaemonoptionsbase.ui:2327 configdaemonoptionsbase.ui:2448
#: confighelperprogramoptionsbase.ui:132 confighelperprogramoptionsbase.ui:194
#: confighelperprogramoptionsbase.ui:239 confighelperprogramoptionsbase.ui:377
#: confighelperprogramoptionsbase.ui:402 confighelperprogramoptionsbase.ui:670
#: confighelperprogramoptionsbase.ui:695 confighelperprogramoptionsbase.ui:778
#: confighelperprogramoptionsbase.ui:1063
#: confighelperprogramoptionsbase.ui:1116
#: confighelperprogramoptionsbase.ui:1141
#: confighelperprogramoptionsbase.ui:1226
#: confighelperprogramoptionsbase.ui:1288
#, no-c-format
msgid "Version information for the program"
msgstr "Versie-informatie voor het programma"
#: configdaemonoptionsbase.ui:207 configdaemonoptionsbase.ui:394
#: configdaemonoptionsbase.ui:581 configdaemonoptionsbase.ui:969
#: configdaemonoptionsbase.ui:1220 configdaemonoptionsbase.ui:1317
#: configdaemonoptionsbase.ui:1653 configdaemonoptionsbase.ui:1840
#: configdaemonoptionsbase.ui:1993 configdaemonoptionsbase.ui:2199
#: configdaemonoptionsbase.ui:2344 configdaemonoptionsbase.ui:2465
#: confighelperprogramoptionsbase.ui:149 confighelperprogramoptionsbase.ui:294
#: confighelperprogramoptionsbase.ui:457 confighelperprogramoptionsbase.ui:570
#: confighelperprogramoptionsbase.ui:587 confighelperprogramoptionsbase.ui:853
#: confighelperprogramoptionsbase.ui:966 confighelperprogramoptionsbase.ui:983
#: confighelperprogramoptionsbase.ui:1038
#: confighelperprogramoptionsbase.ui:1080
#: confighelperprogramoptionsbase.ui:1263
#: confighelperprogramoptionsbase.ui:1305
#: confighelperprogramoptionsbase.ui:1322
#, no-c-format
msgid "Program path"
msgstr "Programmapad"
#: configdaemonoptionsbase.ui:224 configdaemonoptionsbase.ui:411
#: configdaemonoptionsbase.ui:598 configdaemonoptionsbase.ui:1036
#: configdaemonoptionsbase.ui:1237 configdaemonoptionsbase.ui:1334
#: configdaemonoptionsbase.ui:1670 configdaemonoptionsbase.ui:1857
#: configdaemonoptionsbase.ui:2010 configdaemonoptionsbase.ui:2216
#: configdaemonoptionsbase.ui:2361 configdaemonoptionsbase.ui:2482
#: confighelperprogramoptionsbase.ui:96 confighelperprogramoptionsbase.ui:169
#: confighelperprogramoptionsbase.ui:214 confighelperprogramoptionsbase.ui:314
#: confighelperprogramoptionsbase.ui:477 confighelperprogramoptionsbase.ui:645
#: confighelperprogramoptionsbase.ui:753 confighelperprogramoptionsbase.ui:798
#: confighelperprogramoptionsbase.ui:873 confighelperprogramoptionsbase.ui:1161
#: confighelperprogramoptionsbase.ui:1181
#: confighelperprogramoptionsbase.ui:1201
#: confighelperprogramoptionsbase.ui:1246
#, no-c-format
msgid "Program availability (found or not found)"
msgstr "Programmabeschikbaarheid (gevonden of niet gevonden)"
#: configdaemonoptionsbase.ui:242 configdaemonoptionsbase.ui:429
#: configdaemonoptionsbase.ui:1062 configdaemonoptionsbase.ui:1688
#: configdaemonoptionsbase.ui:2500 configdebugoptionsbase.ui:154
#, no-c-format
msgid "Debug level:"
msgstr "Debugniveau:"
#: configdaemonoptionsbase.ui:245 configdaemonoptionsbase.ui:268
#: configdaemonoptionsbase.ui:432 configdaemonoptionsbase.ui:455
#, no-c-format
msgid "vpnc debug level"
msgstr "vpnc debug-niveau"
#: configdaemonoptionsbase.ui:248 configdaemonoptionsbase.ui:435
#: configdaemonoptionsbase.ui:1068 configdaemonoptionsbase.ui:1456
#: configdaemonoptionsbase.ui:1523 configdaemonoptionsbase.ui:1694
#: configdaemonoptionsbase.ui:2506
#, no-c-format
msgid ""
"Debug level of the program. Increase to show more verbose debug output of "
"program. This is helpful if you have any trouble with your VPN connection."
msgstr ""
"Het debugniveau van het programma. Verhoog dit om meer gedetailleerde "
"debuguitvoer van het programma te krijgen. Dit is bruikbaar als u problemen "
"ondervindt met uw VPN-verbinding."
#: configdaemonoptionsbase.ui:271 configdaemonoptionsbase.ui:458
#: configdaemonoptionsbase.ui:1079 configdaemonoptionsbase.ui:1717
#: configdaemonoptionsbase.ui:2529
#, no-c-format
msgid ""
"Debug level of the program. Increase to show more verbose debug output "
"of program. This is helpful if you have any trouble with your VPN "
"connection."
msgstr ""
"Het debugniveau van het programma. Verhoog dit om meer gedetailleerde "
"debuguitvoer van het programma te krijgen. Dit is bruikbaar als u "
"problemen ondervindt met uw VPN-verbinding."
#: configdaemonoptionsbase.ui:305
#, fuzzy, no-c-format
msgid "vpnclient (original Cisco VPN client)"
msgstr "vpnc (vrije client van Cisco VPN concentrators)"
#: configdaemonoptionsbase.ui:335
#, fuzzy, no-c-format
msgid "vpnclient"
msgstr "vpnc"
#: configdaemonoptionsbase.ui:492
#, fuzzy, no-c-format
msgid "FreeS/WAN, Openswan, strongSwan"
msgstr "FreeS/WAN (Openswan)"
#: configdaemonoptionsbase.ui:522
#, no-c-format
msgid "ipsec"
msgstr "ipsec"
#: configdaemonoptionsbase.ui:618
#, fuzzy, no-c-format
msgid "Pluto debug"
msgstr "debug"
#: configdaemonoptionsbase.ui:645
#, no-c-format
msgid "cr&ypt"
msgstr ""
#: configdaemonoptionsbase.ui:651 configdaemonoptionsbase.ui:668
#: configdaemonoptionsbase.ui:685 configdaemonoptionsbase.ui:702
#: configdaemonoptionsbase.ui:719 configdaemonoptionsbase.ui:736
#: configdaemonoptionsbase.ui:753 configdaemonoptionsbase.ui:1366
#: configdaemonoptionsbase.ui:1410 configdaemonoptionsbase.ui:1881
#: configdaemonoptionsbase.ui:2243
#, no-c-format
msgid "Show debug output from pppd"
msgstr "Debuguitvoer van pppd tonen"
#: configdaemonoptionsbase.ui:654 configdaemonoptionsbase.ui:671
#: configdaemonoptionsbase.ui:688 configdaemonoptionsbase.ui:705
#: configdaemonoptionsbase.ui:722 configdaemonoptionsbase.ui:739
#: configdaemonoptionsbase.ui:756 configdaemonoptionsbase.ui:1369
#: configdaemonoptionsbase.ui:1413 configdaemonoptionsbase.ui:1884
#: configdaemonoptionsbase.ui:2246
#, no-c-format
msgid ""
"Enable this to show debug output of program. This is helpful if you have "
"any trouble with your VPN connection."
msgstr ""
"Activeer dit om de debuguitvoer van het programma te bekijken. Dit is "
"bruikbaar als u problemen ondervindt met uw VPN-verbinding."
#: configdaemonoptionsbase.ui:662
#, fuzzy, no-c-format
msgid "&private"
msgstr "&Certificaten"
#: configdaemonoptionsbase.ui:665 configdaemonoptionsbase.ui:750
#: importopenvpnprofiledialogbase.ui:70 importprofiledialogbase.ui:108
#: kvpncimportprofileselectiondialogbase.ui:70
#: newprofilewizardciscomanually.ui:72
#, no-c-format
msgid "Alt+P"
msgstr "Alt+P"
#: configdaemonoptionsbase.ui:679
#, no-c-format
msgid "&klips"
msgstr ""
#: configdaemonoptionsbase.ui:682 profilesshoptionsbase.ui:159
#, no-c-format
msgid "Alt+K"
msgstr "Alt+K"
#: configdaemonoptionsbase.ui:696
#, fuzzy, no-c-format
msgid "emitting"
msgstr "NAT-instellingen"
#: configdaemonoptionsbase.ui:713
#, no-c-format
msgid "&raw"
msgstr ""
#: configdaemonoptionsbase.ui:716 configdaemonoptionsbase.ui:1117
#: newprofilewizardnetwork.ui:363 newprofilewizardnetworkroute.ui:191
#: profilenetworkgeneraloptionsbase.ui:103
#: profilenetworkrouteoptionsbase.ui:191 profilenetworkrouteoptionsbase.ui:208
#, no-c-format
msgid "Alt+R"
msgstr "Alt+R"
#: configdaemonoptionsbase.ui:730
#, no-c-format
msgid "&control"
msgstr ""
#: configdaemonoptionsbase.ui:733 configlogoptionsbase.ui:423
#: configlogoptionsbase.ui:489 newprofilewizardauthselection.ui:55
#: newprofilewizardconnectoptions.ui:84 newprofilewizardtypeselection.ui:65
#: profilecertoptionsbase.ui:464 profilenetworkgeneraloptionsbase.ui:621
#, no-c-format
msgid "Alt+C"
msgstr "Alt+C"
#: configdaemonoptionsbase.ui:747
#, fuzzy, no-c-format
msgid "&parsing"
msgstr "ping"
#: configdaemonoptionsbase.ui:770
#, fuzzy, no-c-format
msgid "KLIPS debug"
msgstr "debug"
#: configdaemonoptionsbase.ui:805
#, no-c-format
msgid "spi"
msgstr ""
#: configdaemonoptionsbase.ui:816
#, fuzzy, no-c-format
msgid "ah"
msgstr "Pad"
#: configdaemonoptionsbase.ui:827
#, fuzzy, no-c-format
msgid "esp"
msgstr "ja"
#: configdaemonoptionsbase.ui:838
#, fuzzy, no-c-format
msgid "eroute"
msgstr "route"
#: configdaemonoptionsbase.ui:849
#, no-c-format
msgid "pfkey"
msgstr ""
#: configdaemonoptionsbase.ui:860
#, no-c-format
msgid "radij"
msgstr ""
#: configdaemonoptionsbase.ui:871
#, no-c-format
msgid "verbose"
msgstr ""
#: configdaemonoptionsbase.ui:882
#, no-c-format
msgid "ipcomp"
msgstr ""
#: configdaemonoptionsbase.ui:893
#, fuzzy, no-c-format
msgid "xform"
msgstr "Form1"
#: configdaemonoptionsbase.ui:904
#, no-c-format
msgid "&tunnel-xmit"
msgstr ""
#: configdaemonoptionsbase.ui:930
#, no-c-format
msgid "racoon + ipsec-tools (native Linux 2.6 or BSD)"
msgstr "racoon + ipsec-tools (native Linux 2.6 of BSD)"
#: configdaemonoptionsbase.ui:994
#, fuzzy, no-c-format
msgid "racoon/setkey"
msgstr "racoon"
#: configdaemonoptionsbase.ui:1065
#, no-c-format
msgid "ipsec-tools debug level"
msgstr "ipsec-tools debug-niveau"
#: configdaemonoptionsbase.ui:1076
#, no-c-format
msgid "Debug level of racoon"
msgstr "Debugniveau van racoon"
#: configdaemonoptionsbase.ui:1114
#, no-c-format
msgid "Do kill &racoon if still running"
msgstr ""
#: configdaemonoptionsbase.ui:1161
#, no-c-format
msgid "pppd"
msgstr "pppd"
#: configdaemonoptionsbase.ui:1258
#, no-c-format
msgid "pptp"
msgstr "pptp"
#: configdaemonoptionsbase.ui:1360
#, no-c-format
msgid "Ena&ble pppd debug"
msgstr "pppd-de&buggen activeren"
#: configdaemonoptionsbase.ui:1363 configdaemonoptionsbase.ui:1407
#, no-c-format
msgid "Alt+B"
msgstr "Alt+B"
#: configdaemonoptionsbase.ui:1404
#, fuzzy, no-c-format
msgid "Ena&ble pptpd debug"
msgstr "pppd-de&buggen activeren"
#: configdaemonoptionsbase.ui:1450
#, fuzzy, no-c-format
msgid "pppd kernel log level:"
msgstr "pptp debug-niveau"
#: configdaemonoptionsbase.ui:1453 configdaemonoptionsbase.ui:1479
#: configdaemonoptionsbase.ui:1520 configdaemonoptionsbase.ui:1546
#, no-c-format
msgid "pptp debug level"
msgstr "pptp debug-niveau"
#: configdaemonoptionsbase.ui:1482 configdaemonoptionsbase.ui:1549
#, no-c-format
msgid ""
"Debug level of the program. Increase to show more verbose debug output "
"of program. This is helpful if you have any trouble with your VPN c"
msgstr ""
"Het debugniveau van het programma. Verhoog om meer gedetailleerde "
"debuguitvoer van het programma te krijgen. Dit is bruikbaar als u "
"problemen ondervindt met uw vpnc."
#: configdaemonoptionsbase.ui:1517
#, fuzzy, no-c-format
msgid "pptpd log level:"
msgstr "pptp debug-niveau"
#: configdaemonoptionsbase.ui:1594
#, no-c-format
msgid "openvpn"
msgstr "openvpn"
#: configdaemonoptionsbase.ui:1691 configdaemonoptionsbase.ui:1714
#: configdaemonoptionsbase.ui:2503 configdaemonoptionsbase.ui:2526
#, no-c-format
msgid "openvpn debug level"
msgstr "openvpn debug-niveau"
#: configdaemonoptionsbase.ui:1875
#, fuzzy, no-c-format
msgid "Enable l2tpd debug"
msgstr "pppd-de&buggen activeren"
#: configdaemonoptionsbase.ui:1892
#, no-c-format
msgid "Do kill l&2tpd if still running"
msgstr ""
#: configdaemonoptionsbase.ui:1895 newprofiledialogbase.ui:99
#: newprofilewizardpptp.ui:327 newprofilewizardtypeselection.ui:123
#: profilecertoptionsbase.ui:321 profileipsecoptionsbase.ui:521
#, no-c-format
msgid "Alt+2"
msgstr "Alt+2"
#: configdaemonoptionsbase.ui:1912
#, no-c-format
msgid "XL2TP"
msgstr ""
#: configdaemonoptionsbase.ui:2036
#, no-c-format
msgid "Do kill &xl2tpd if still running"
msgstr ""
#: configdaemonoptionsbase.ui:2039 profilecmdexecafterconnectoptionsbase.ui:46
#, no-c-format
msgid "Alt+X"
msgstr "Alt+X"
#: configdaemonoptionsbase.ui:2059
#, fuzzy, no-c-format
msgid "enable L2TP state debug"
msgstr "pppd-de&buggen activeren"
#: configdaemonoptionsbase.ui:2070
#, fuzzy, no-c-format
msgid "enable L2TP AVP debug"
msgstr "pppd-de&buggen activeren"
#: configdaemonoptionsbase.ui:2081
#, fuzzy, no-c-format
msgid "enable L2TP packet debug"
msgstr "pppd-de&buggen activeren"
#: configdaemonoptionsbase.ui:2092
#, fuzzy, no-c-format
msgid "enable L2TP network debug"
msgstr "pppd-de&buggen activeren"
#: configdaemonoptionsbase.ui:2110
#, no-c-format
msgid "OpenL2tp"
msgstr ""
#: configdaemonoptionsbase.ui:2140
#, fuzzy, no-c-format
msgid "openl2tpd"
msgstr "openssl"
#: configdaemonoptionsbase.ui:2237
#, fuzzy, no-c-format
msgid "Enable &openl2tp debug"
msgstr "pppd-de&buggen activeren"
#: configdaemonoptionsbase.ui:2285
#, fuzzy, no-c-format
msgid "vtund"
msgstr "Gevonden"
#: configdaemonoptionsbase.ui:2406
#, no-c-format
msgid "ssh"
msgstr ""
#: configdebugoptionsbase.ui:43
#, no-c-format
msgid "S&how debug console"
msgstr "Debugconsole &tonen"
#: configdebugoptionsbase.ui:46 newprofilewizardauthselection.ui:66
#: newprofilewizardconnectionstatuscheck.ui:49 newprofilewizardopenvpn.ui:544
#: newprofilewizardpptp.ui:162 profilepptpoptionsbase.ui:201
#, no-c-format
msgid "Alt+H"
msgstr "Alt+H"
#: configdebugoptionsbase.ui:49
#, no-c-format
msgid "Show the debug console in main window"
msgstr "Toon het debugconsole in het hoofdvenster"
#: configdebugoptionsbase.ui:52
#, no-c-format
msgid ""
"Enable this if you want to see the debug console in main KVpnc window."
msgstr ""
"Activeer dit als u de debugconsole in het hoofdvenster van KVpnc wilt "
"zien."
#: configdebugoptionsbase.ui:87
#, no-c-format
msgid "Write log &file"
msgstr "Logbestand schrij&ven"
#: configdebugoptionsbase.ui:90 logviewerdialogbase.ui:112
#, no-c-format
msgid "Alt+F"
msgstr "Alt+F"
#: configdebugoptionsbase.ui:93
#, no-c-format
msgid "Write logs to file: $HOME/.trinity/share/apps/kvpnc/kvpnc.log"
msgstr "Logs schrijven naar bestand: $HOME/.trinity/share/apps/kvpnc/kvpnc.log"
#: configdebugoptionsbase.ui:143 configdebugoptionsbase.ui:157
#, no-c-format
msgid ""
"KVpnc debug level. Increase to show more verbose debug output of KVpnc."
msgstr ""
"KVpnc-debugniveau: verhoog om meer uitgebreide debuguitvoer van KVpnc te "
"krijgen."
#: configdebugoptionsbase.ui:146 configdebugoptionsbase.ui:160
#, no-c-format
msgid ""
"Debug level of the KVpnc program. Increase to show more verbose debug "
"output of KVpnc. This is helpful if you have any trouble with using "
"KVpnc."
msgstr ""
"Debugniveau van het KVpnc-programma. Verhoog om een meer uitgebreide "
"debuguitvoer van KVpnc te krijgen. Dit is bruikbaar als u problemen "
"ondervindt bij het gebruik van KVpnc."
#: configdebugoptionsbase.ui:195
#, no-c-format
msgid "Keep connec&tion files"
msgstr "Verbindingsbestanden be&houden"
#: configdebugoptionsbase.ui:201
#, no-c-format
msgid "Do not remove connection config files after use"
msgstr "Verwijder verbindingsconfiguratiebestanden niet na gebruik"
#: configgeneraloptions.ui:61
#, fuzzy, no-c-format
msgid "Use K&Wallet"
msgstr "TDEWallet gebr&uiken"
#: configgeneraloptions.ui:67
#, no-c-format
msgid "Use TDEWallet for secure store passwords"
msgstr "Gebruik TDEWallet voor het veilig opslaan van wachtwoorden"
#: configgeneraloptions.ui:105
#, no-c-format
msgid "Do not &quit by clicking close button"
msgstr "Niet a&fsluiten bij klikken op sluitknop"
#: configgeneraloptions.ui:111
#, no-c-format
msgid ""
"Close button minimizes to system tray (kicker) instead of quit the "
"program"
msgstr ""
"De sluitknop minimaliseert naar het systeemvak in plaats van het "
"afsluiten van het programma"
#: configgeneraloptions.ui:146
#, no-c-format
msgid "Hide on startup"
msgstr ""
#: configgeneraloptions.ui:152
#, no-c-format
msgid ""
"Hides the KVpnc mainwindow on startup. KVpnc is still accessable vrom dock "
"menu."
msgstr ""
#: confighelperprogramoptionsbase.ui:16
#, no-c-format
msgid "Helper programs"
msgstr "Hulpprogramma's"
#: confighelperprogramoptionsbase.ui:19
#, no-c-format
msgid "Here you can set options for small helper programs (no daemons)"
msgstr ""
"Hier kunt u opties voor kleine hulpprogramma's (geen daemons) instellen"
#: confighelperprogramoptionsbase.ui:57
#, no-c-format
msgid "ifconfig"
msgstr "ifconfig"
#: confighelperprogramoptionsbase.ui:107
#, no-c-format
msgid "Path"
msgstr "Pad"
#: confighelperprogramoptionsbase.ui:258
#, no-c-format
msgid "pkcs11-tool"
msgstr ""
#: confighelperprogramoptionsbase.ui:333
#, no-c-format
msgid "cisco_cert_mgr"
msgstr ""
#: confighelperprogramoptionsbase.ui:421
#, no-c-format
msgid "ping"
msgstr "ping"
#: confighelperprogramoptionsbase.ui:496
#, no-c-format
msgid "ksshaskpass"
msgstr ""
#: confighelperprogramoptionsbase.ui:534
#, no-c-format
msgid "ssh-askpass-gnome"
msgstr ""
#: confighelperprogramoptionsbase.ui:606
#, no-c-format
msgid "openssl"
msgstr "openssl"
#: confighelperprogramoptionsbase.ui:714
#, no-c-format
msgid "killall"
msgstr "killall"
#: confighelperprogramoptionsbase.ui:817
#, no-c-format
msgid "route"
msgstr "route"
#: confighelperprogramoptionsbase.ui:892
#, no-c-format
msgid "Tool"
msgstr "Hulpprogramma"
#: confighelperprogramoptionsbase.ui:930
#, no-c-format
msgid "ip"
msgstr "ip"
#: confighelperprogramoptionsbase.ui:1002
#, no-c-format
msgid "iptables"
msgstr "iptables"
#: confighelperprogramoptionsbase.ui:1091
#, no-c-format
msgid "Version"
msgstr "Versie"
#: confighelperprogramoptionsbase.ui:1341
#, no-c-format
msgid "kill"
msgstr "kill"
#: confighelperprogramoptionsbase.ui:1379
#, fuzzy, no-c-format
msgid "tail"
msgstr "Profiel"
#: configlogoptionsbase.ui:55 configlogoptionsbase.ui:66
#, no-c-format
msgid "Font size in the debug console"
msgstr "Tekengrootte voor debugconsole"
#: configlogoptionsbase.ui:63
#, no-c-format
msgid "Font size:"
msgstr "Tekengrootte:"
#: configlogoptionsbase.ui:101
#, no-c-format
msgid "Enable colori&zed log output"
msgstr "Gekleurde loguit&voer activeren"
#: configlogoptionsbase.ui:104 newprofilewizardopenvpn.ui:293
#: profileopenvpnoptionsbase.ui:106
#, no-c-format
msgid "Alt+Z"
msgstr "Alt+Z"
#: configlogoptionsbase.ui:107
#, no-c-format
msgid "Enable color messages in the debug console (recommend)"
msgstr "Activeer gekleurde berichten in de debugconsole (aanbevolen)"
#: configlogoptionsbase.ui:134
#, no-c-format
msgid "Color settings"
msgstr "Kleurinstellingen"
#: configlogoptionsbase.ui:145
#, no-c-format
msgid "Error message"
msgstr "Fout melding"
#: configlogoptionsbase.ui:148 configlogoptionsbase.ui:279
#: configlogoptionsbase.ui:324 configlogoptionsbase.ui:395
#: configlogoptionsbase.ui:461 configlogoptionsbase.ui:527
#, no-c-format
msgid "Message type"
msgstr "Berichttype"
#: configlogoptionsbase.ui:265
#, no-c-format
msgid "C&hange..."
msgstr "Wijzi&gen..."
#: configlogoptionsbase.ui:268 configlogoptionsbase.ui:335
#: configlogoptionsbase.ui:346 configlogoptionsbase.ui:360
#: configlogoptionsbase.ui:426 configlogoptionsbase.ui:492
#, no-c-format
msgid "Change color of this message type"
msgstr "Kleur van dit berichttype wijzigen"
#: configlogoptionsbase.ui:276
#, no-c-format
msgid "Success message"
msgstr "Succesbericht"
#: configlogoptionsbase.ui:321
#, no-c-format
msgid "Remote message"
msgstr "Remote bericht"
#: configlogoptionsbase.ui:332
#, no-c-format
msgid "Ch&ange..."
msgstr "&Wijzigen..."
#: configlogoptionsbase.ui:343
#, no-c-format
msgid "Cha&nge..."
msgstr "Wijzige&n..."
#: configlogoptionsbase.ui:354
#, no-c-format
msgid "Chan&ge..."
msgstr "Wij&zigen..."
#: configlogoptionsbase.ui:357 kvpncimportprofileselectiondialogbase.ui:59
#: newprofiledialogbase.ui:362
#, no-c-format
msgid "Alt+G"
msgstr "Alt+G"
#: configlogoptionsbase.ui:392
#, no-c-format
msgid "Debug message"
msgstr "Debugbericht"
#: configlogoptionsbase.ui:420 configlogoptionsbase.ui:486
#, no-c-format
msgid "&Change..."
msgstr "&Wijzigen..."
#: configlogoptionsbase.ui:458
#, no-c-format
msgid "Background color"
msgstr ""
#: configlogoptionsbase.ui:524
#, no-c-format
msgid "Informal message"
msgstr "Informeel bericht"
#: displaycertdialogbase.ui:94
#, no-c-format
msgid "Valid to:"
msgstr ""
#: displaycertdialogbase.ui:171
#, fuzzy, no-c-format
msgid "Key size:"
msgstr "Tekengrootte:"
#: displaycertdialogbase.ui:220
#, no-c-format
msgid "Issuer:"
msgstr ""
#: displaycertdialogbase.ui:269
#, no-c-format
msgid "Subject:"
msgstr ""
#: displaycertdialogbase.ui:310
#, fuzzy, no-c-format
msgid "Data of certificate:"
msgstr "Certificaat"
#: displaycertdialogbase.ui:432
#, fuzzy, no-c-format
msgid "Domain:"
msgstr "Beschrijving: %1"
#: displaycertdialogbase.ui:530
#, fuzzy, no-c-format
msgid "Serial:"
msgstr "Interval:"
#: displaycertdialogbase.ui:678
#, no-c-format
msgid "Valid from:"
msgstr ""
#: enterpassworddialogbase.ui:78 enterpassworddialogbase.ui:193
#: enterpassworddialogbase.ui:204 newprofiledialogbase.ui:274
#: newprofilewizarduser.ui:71 profileuseroptionsbase.ui:126
#, no-c-format
msgid "Username for authentication"
msgstr "Gebruikersnaam voor authenticatie"
#: enterpassworddialogbase.ui:86
#, no-c-format
msgid "Pre-shared key (PSK):"
msgstr "Preshared key (PSK):"
#: enterpassworddialogbase.ui:89
#, no-c-format
msgid "re-shared key for authenticat (shared secret)"
msgstr "Preshared key voor authenticatie (shared secret)"
#: enterpassworddialogbase.ui:117 enterpassworddialogbase.ui:162
#: newprofiledialogbase.ui:307 newprofilewizarduser.ui:82
#: profileuseroptionsbase.ui:46
#, no-c-format
msgid "Password for authentication"
msgstr "Wachtwoord voor authenticatie"
#: enterpassworddialogbase.ui:131
#, fuzzy, no-c-format
msgid "IPsec ID"
msgstr "IPSec-id:"
#: enterpassworddialogbase.ui:159 newprofiledialogbase.ui:195
#: newprofilewizarduser.ui:133 profileuseroptionsbase.ui:173
#, no-c-format
msgid "Password:"
msgstr "Wachtwoord:"
#: enterpassworddialogbase.ui:190
#, no-c-format
msgid "ID:"
msgstr ""
#: enterpassworddialogbase.ui:218
#, no-c-format
msgid "Pre-shared key for authenticat (shared secret)"
msgstr "Preshared-sleutel voor authenticatie (shared secret)"
#: enterpassworddialogbase.ui:221
#, no-c-format
msgid "Enter here the group password"
msgstr "Voer hier het groepswachtwoord in"
#: enterpassworddialogbase.ui:248
#, fuzzy, no-c-format
msgid "Save &username"
msgstr "Gebruikersnaam niet opslaan"
#: enterpassworddialogbase.ui:251 newprofilewizardcert.ui:292
#: newprofilewizardfreeswan.ui:509 newprofilewizardnat.ui:115
#: newprofilewizardnetwork.ui:98 newprofilewizardnetworkroute.ui:91
#: newprofilewizardracoon.ui:420 newprofilewizarduser.ui:173
#: profilecertoptionsbase.ui:583 profileciscooptionsbase.ui:413
#: profileipsecoptionsbase.ui:304 profilenetworkgeneraloptionsbase.ui:161
#: profilenetworknatoptionsbase.ui:62 profilenetworkrouteoptionsbase.ui:91
#: profilenetworkvirtualipoptionsbase.ui:178
#: profilenetworkvirtualipoptionsbase.ui:210 profileracoonoptionsbase.ui:85
#: profilesshoptionsbase.ui:46 profilesshoptionsbase.ui:107
#: profileuseroptionsbase.ui:238
#, no-c-format
msgid "Alt+U"
msgstr "Alt+U"
#: enterpassworddialogbase.ui:254 enterpassworddialogbase.ui:268
#: enterpassworddialogbase.ui:282
#, no-c-format
msgid ""
"Save username, shared secret and password in config file or in TDEWallet"
msgstr ""
"Sla gebruikersnaam, shared secret en wachtwoord op in het "
"configuratiebestand of in TDEWallet"
#: enterpassworddialogbase.ui:262
#, no-c-format
msgid "Save PSK"
msgstr "PSK opslaan"
#: enterpassworddialogbase.ui:276
#, fuzzy, no-c-format
msgid "Save password"
msgstr "&Wachtwoord opslaan"
#: enterxauthinteractivepasscodedialogbase.ui:43
#, no-c-format
msgid "Save pass&word"
msgstr "&Wachtwoord opslaan"
#: enterxauthinteractivepasscodedialogbase.ui:62
#, no-c-format
msgid "Enter the Xauth interactive passcode"
msgstr "Voer de Xauth interactieve toegangscode in"
#: enterxauthinteractivepasscodedialogbase.ui:117
#, no-c-format
msgid "Xauth passcode for authentication"
msgstr "Xauth-toegangscode voor authenticatie"
#: enterxauthinteractivepasscodedialogbase.ui:125
#, no-c-format
msgid "Passcode:"
msgstr "Toegangscode:"
#: generateopenvpnkeydialogbase.ui:44 importcertificatedialogbase.ui:46
#: importopenvpnprofiledialogbase.ui:88 importprofiledialogbase.ui:60
#, no-c-format
msgid "File name:"
msgstr "Bestandsnaam:"
#: generateopenvpnkeydialogbase.ui:52
#, no-c-format
msgid "Filename to store key"
msgstr "Bestandsnaam om sleutel op te slaan"
#: generateopenvpnkeydialogbase.ui:55
#, no-c-format
msgid ""
"This is a file where the key should be stored. This file must be used on "
"the remote side too."
msgstr ""
"Dit is het bestand waarin u de sleutel wilt opslaan. Dit bestand dient "
"ook aan de remote zijde te worden gebruikt."
#: helpdialogbase.ui:36
#, no-c-format
msgid ""
"\n"
"Topics \n"
"1. Usage \n"
"1.1 Connect \n"
"1.2 Disconnect \n"
"2. Getting external help \n"
"2.1 Homepage \n"
"2.2 Submitting bugs \n"
"2.3 Author \n"
"1. Usage \n"
"1.1 Connect \n"
"Start kvpnc and if vpnc-connect/vpnc-disconnect is not installed in /usr/"
"sbin change it in settings. Click on "New profile..." to add a new "
"profile. Enter the new Name in the upcoming dialog, fill in the empty fields "
"and save profile by clicking on "Save profile...". After enter "
"your VPN data, click on "connect" to connect to your VPN server. "
"By default, kvpnc minimizes into kicker dock after sucessfull connect. back to top \n"
"1.2 Disconnect \n"
"To disconnect, click on kicker dock and kvpnc main window will be "
"restored. Then click on "disconnect". You can also use toolbar "
"icons or menu entries in kicker dock context menu. back "
"to top \n"
"2. Getting external help \n"
"2.1 Homepage \n"
"Go to http://home.gna.org/kvpnc/"
"a> for new releases, contacts, etc. back to top \n"
"2.2 Submitting bugs \n"
"Go to https://gna.org/bugs/?"
"group=kvpnc for submitting new bugs or look for open bugs. back to top \n"
"2.3 Author \n"
"Send a mail to Christoph Thielecke (u15119@hs-harz.de) if you have questions, suggestions or wishes. back to top \n"
""
msgstr ""
"\n"
"Onderwerpen \n"
"1. Gebruik \n"
"1.1 Verbinden \n"
"1.2 Verbinding verbreken \n"
"2. Externe hulp vragen \n"
"2.1 Website \n"
"2.2 Bugs indienen \n"
"2.3 Auteur \n"
"1. Gebruik \n"
"1.1 Verbinden \n"
" Start kvpnc en pas de instellingen aan als vpnc-connect/vpnc-disconnect "
"niet zijn geïnstalleerd in /usr/sbin. Klik op "Nieuw profiel... " "
"om een nieuw profiel toe te voegen. Voer de nieuwe naam op in de geopende "
"dialoog en vul de lege velden in. Klik op "Profiel opslaan..." om "
"uw wijzigingen te bewaren. Nadat u uw VPN-gegevens hebt ingevuld klikt u op "
""verbinden" om verbinding te maken met uw VPN-server. Standaard "
"wordt kpvnc geminimaliseerd naar het systeemvak als de verbinding is "
"opgebouwd. terug naar boven \n"
"1.2 Verbinding verbreken \n"
"Om de verbinding te verbreken klikt u op het systeemvakpictogram. het "
"hoofdvenster van kpvnc wordt dan geopend. Klik daarna op "Verbinding "
"verbreken ". U kunt ook de werkbalkpictogrammen gebruiken of de "
"menuoptie in het contextmenu van het systeemvakpictogram. terug naar boven \n"
"2. Externe hulp vragen \n"
"2.1 Website \n"
"Ga naar http://home.gna.org/kvpnc/"
" voor nieuwe uitgaven, contact, etc. terug naar "
"boven \n"
"2.2 Bugs indienen \n"
"Ga naar https://gna.org/"
"bugs/?group=kvpnc voor het indienen van bugs of het inzien van bestaande "
"bugs.terug naar boven \n"
"2.3 Auteur \n"
"Stuur een e-mail naar Christoph Thielecke (u15119@hs-harz.de) als u vragen, suggesties of wensen hebt. terug naar boven \n"
""
#: helpdialogbase.ui:105
#, no-c-format
msgid "Close dialog"
msgstr "Venster sluiten"
#: importcertificatedialogbase.ui:54
#, no-c-format
msgid "Import type:"
msgstr "Importtype:"
#: importcertificatedialogbase.ui:62 newprofilewizardcert.ui:219
#, no-c-format
msgid "Certificate path:"
msgstr "Certificaatpad:"
#: importcertificatedialogbase.ui:73
#, no-c-format
msgid "/etc/racoon/certs"
msgstr "/etc/racoon/certs"
#: importcertificatedialogbase.ui:76
#, no-c-format
msgid "Path to certificates directory for IPSec"
msgstr "Pad naar certificatendirectory voor IPSec"
#: importcertificatedialogbase.ui:90
#, no-c-format
msgid "Path to the certificate file in P12 format"
msgstr "Pad naar het certificaatbestand in P12-opmaak"
#: importcertificatedialogbase.ui:113
#, no-c-format
msgid "P12: IPsec"
msgstr ""
#: importcertificatedialogbase.ui:118
#, no-c-format
msgid "P12: racoon"
msgstr "P12: racoon"
#: importcertificatedialogbase.ui:123
#, no-c-format
msgid "DER CA"
msgstr "DER CA"
#: importcertificatedialogbase.ui:128
#, fuzzy, no-c-format
msgid "P12: OpenVPN"
msgstr "OpenVNC"
#: importcertificatedialogbase.ui:138
#, fuzzy, no-c-format
msgid "Cisco CA (propritary)"
msgstr "Cisco(vpn)"
#: importcertificatedialogbase.ui:143
#, fuzzy, no-c-format
msgid "Cisco User+CA (propritary)"
msgstr "Cisco(vpn)"
#: importcertificatedialogbase.ui:150
#, no-c-format
msgid "Type of connection for which this certificate should be used"
msgstr "Type verbinding waarvoor dit certificaat dient te worden gebruikt"
#: importcertificatedialogbase.ui:153
#, no-c-format
msgid ""
"The following types are available: \n"
"\n"
"P12: IPsec | import certificate in PKCS12 format for IPSec "
"use | \n"
"P12: racoon | import certificate in PKCS12 format for "
"ipsectools (racoon) use | \n"
"DER CA | import CA certificate in DER format | \n"
"P12: OpenVPN | import certificate in PKCS12 format for OpenVPN "
"use | \n"
"Cisco (propritary) | import user certificate for propritary "
"cisco client use | \n"
"Cisco CA (propritary) | import CA certificate for propritary "
"cisco client use | \n"
"Cisco User+CA (propritary) | import user and CA certificate "
"for propritary cisco client use | \n"
" "
msgstr ""
#: importcertificatedialogbase.ui:217
#, no-c-format
msgid "Import password:"
msgstr "Wachtwoord importeren:"
#: importcertificatedialogbase.ui:228
#, no-c-format
msgid "Import password for P12 certificate (got from administrator)"
msgstr ""
"Wachtwoord importeren voor P12-certificaat (ontvangen van systeembeheerder)"
#: importcertificatedialogbase.ui:238
#, fuzzy, no-c-format
msgid "Protect private key &with passphrase"
msgstr "Wachtwoord voor pri&vate sleutel opslaan"
#: importcertificatedialogbase.ui:255
#, fuzzy, no-c-format
msgid "Passphrase"
msgstr "Wachtwoord bevestigen:"
#: importcertificatedialogbase.ui:266
#, no-c-format
msgid ""
"Passphrase to protect private key. Feel free to choose what you want (don't "
"forget it!)."
msgstr ""
"Wachtwoord voor het beschermen van de private sleutel. Voel vrij om een "
"eigen wachtwoord te bedenken (vergeet het wachtwoord niet!)."
#: importcertificatedialogbase.ui:290
#, no-c-format
msgid "Passphrase to protect private key (again)"
msgstr "Wachtwoord voor het beschermen van de private sleutel (opnieuw)"
#: importopenvpnprofiledialogbase.ui:67 importprofiledialogbase.ui:105
#: kvpncimportprofileselectiondialogbase.ui:67
#, fuzzy, no-c-format
msgid "open &profile manager after import"
msgstr "Selecteer het te gebruiken profiel"
#: importopenvpnprofiledialogbase.ui:96
#, no-c-format
msgid "File name of the OpenVPN config (*.ovpn, *.conf)"
msgstr "Bestandsnaam van de OpenVPN-configuratie (*.ovpn, *.conf)"
#: importopenvpnprofiledialogbase.ui:106
#, no-c-format
msgid "Please choose the OpenVPN config file:"
msgstr "Kies het configuratiebestand van OpenVPN:"
#: importprofiledialogbase.ui:17
#, no-c-format
msgid "Import Profile"
msgstr "Profiel importeren"
#: importprofiledialogbase.ui:44
#, no-c-format
msgid "Please choose the PCF file:"
msgstr "Kies het PCF-bestand:"
#: importprofiledialogbase.ui:68
#, no-c-format
msgid "File name of the Cisco profile (*.PCF)"
msgstr "Bestandsnaam voor Cisco-profiel (*.PCF)"
#: kvpncimportprofileselectiondialogbase.ui:16
#, fuzzy, no-c-format
msgid "Select profiles"
msgstr "Selecteer het te gebruiken profiel"
#: kvpncimportprofileselectiondialogbase.ui:35
#, fuzzy, no-c-format
msgid "Select profile for import:"
msgstr "Selecteer het te gebruiken profiel"
#: kvpncimportprofileselectiondialogbase.ui:56
#, fuzzy, no-c-format
msgid "import &global settings"
msgstr "Kleurinstellingen"
#: kvpncimportprofileselectiondialogbase.ui:122
#, fuzzy, no-c-format
msgid "Import name prefix:"
msgstr "Profiel importeren"
#: kvpncimportprofileselectiondialogbase.ui:176
#, no-c-format
msgid "Togg&le all"
msgstr ""
#: kvpncimportprofileselectiondialogbase.ui:187
#, fuzzy, no-c-format
msgid "&Import selected profiles"
msgstr "Profiel importeren"
#: kvpncui.rc:8
#, no-c-format
msgid "&Profile"
msgstr "&Profiel"
#: kvpncui.rc:27
#, no-c-format
msgid "&KVpnc"
msgstr "&KVpnc"
#: logviewerdialogbase.ui:63
#, no-c-format
msgid "Line count from end:"
msgstr ""
#: logviewerdialogbase.ui:85
#, fuzzy, no-c-format
msgid "up&date"
msgstr "&Doneren"
#: logviewerdialogbase.ui:88 mainviewbase.ui:96 manageciscocertbase.ui:114
#: profileciscooptionsbase.ui:202
#, no-c-format
msgid "Alt+D"
msgstr "Alt+D"
#: logviewerdialogbase.ui:96
#, no-c-format
msgid "|"
msgstr ""
#: logviewerdialogbase.ui:109
#, fuzzy, no-c-format
msgid "&find"
msgstr "Profiel"
#: mainviewbase.ui:43
#, no-c-format
msgid "Profile:"
msgstr "Profiel:"
#: mainviewbase.ui:59
#, no-c-format
msgid "Name of the current profile"
msgstr "Naam van huidig profiel"
#: mainviewbase.ui:62
#, no-c-format
msgid "Here you can select the profile to use for connection."
msgstr "Hier kunt u het profiel selecteren om voor de verbinding te gebruiken."
#: mainviewbase.ui:70
#, no-c-format
msgid "Connec&t"
msgstr "&Verbinden"
#: mainviewbase.ui:82
#, no-c-format
msgid "Click to establish connection for selected profile"
msgstr "Klik om een verbinding op te bouwen voor het huidige profiel"
#: mainviewbase.ui:85
#, no-c-format
msgid "Connect button"
msgstr "Verbindingsknop"
#: mainviewbase.ui:102
#, no-c-format
msgid "Click for disconnect the current connection"
msgstr "Klik hier om de huidige verbinding te verbreken"
#: mainviewbase.ui:105
#, no-c-format
msgid "Disconnect button"
msgstr "Verbreekknop"
#: manageciscocertbase.ui:51
#, no-c-format
msgid "Certificates in the Cisco cert store:"
msgstr ""
#: manageciscocertbase.ui:57
#, no-c-format
msgid "#"
msgstr ""
#: manageciscocertbase.ui:111
#, no-c-format
msgid "&Delete cert from cert store"
msgstr ""
#: manageciscocertbase.ui:149
#, fuzzy, no-c-format
msgid "&Import certificate from file..."
msgstr "Certificaat importeren..."
#: newprofiledialogbase.ui:16
#, no-c-format
msgid "Add new Profile"
msgstr "Nieuw profiel toevoegen"
#: newprofiledialogbase.ui:41
#, no-c-format
msgid "Ad&vanced..."
msgstr "Gea&vanceerd..."
#: newprofiledialogbase.ui:47
#, no-c-format
msgid "Advanced settings (mostly not need)"
msgstr "Geavanceerde instellingen (meestal niet nodig)"
#: newprofiledialogbase.ui:82
#, no-c-format
msgid "&Import Cisco PCF Profile..."
msgstr "Cisco PCF-profiel &importeren..."
#: newprofiledialogbase.ui:96 profilecertoptionsbase.ui:318
#, no-c-format
msgid "Import p1&2 Certificate..."
msgstr "P1&2-certificaat importeren..."
#: newprofiledialogbase.ui:102 profilecertoptionsbase.ui:324
#, no-c-format
msgid "Import a certificate in P12 format"
msgstr "Importeer een certificaat in P12-opmaak"
#: newprofiledialogbase.ui:146 newprofilewizardciscomanually.ui:130
#: profileciscooptionsbase.ui:325 profilevtunoptionsbase.ui:113
#, no-c-format
msgid "IPSec ID of the remote side"
msgstr "IPSec-id van de remote zijde"
#: newprofiledialogbase.ui:157
#, no-c-format
msgid "Network device:"
msgstr "Netwerkapparaat:"
#: newprofiledialogbase.ui:168 newprofilewizardpsk.ui:153
#: profilepskoptionsbase.ui:115
#, no-c-format
msgid "Pre-shared key for authentication (shared secret)"
msgstr "Preshared sleutel voor authenticatie (shared secret)"
#: newprofiledialogbase.ui:176
#, no-c-format
msgid "Certificate file name"
msgstr "Naam van certificaatbestand"
#: newprofiledialogbase.ui:187 newprofilewizardgeneral.ui:59
#: profilegeneraloptionsbase.ui:43
#, no-c-format
msgid "Description:"
msgstr "Beschrijving:"
#: newprofiledialogbase.ui:214
#, no-c-format
msgid "&Save user password"
msgstr "Gebruikerswachtwoord op&slaan"
#: newprofiledialogbase.ui:217 newprofilewizardtypeselection.ui:167
#, no-c-format
msgid "Alt+S"
msgstr "Alt+S"
#: newprofiledialogbase.ui:220
#, no-c-format
msgid "Save the user password in config file (or in TDEWallet if available)"
msgstr ""
"Bewaar het gebruikerswachtwoord in het configuratiebestand (of in TDEWallet "
"indien beschikbaar)"
#: newprofiledialogbase.ui:236
#, no-c-format
msgid "Connection type of the new profile"
msgstr "Type verbinding van het nieuwe profiel"
#: newprofiledialogbase.ui:239 profilegeneraloptionsbase.ui:86
#, no-c-format
msgid "This is the connection type of the profile (e.g. Cisco)."
msgstr "Dit is het verbindingstype van het profiel (bijv. Cisco)."
#: newprofiledialogbase.ui:247 newprofilewizardgeneral.ui:51
#, no-c-format
msgid "Description of the new profile"
msgstr "Beschrijving van het nieuwe profiel"
#: newprofiledialogbase.ui:250
#, no-c-format
msgid "Enter the description of this profile here."
msgstr "Voer hier de beschrijving van dit nieuwe profiel in."
#: newprofiledialogbase.ui:258 newprofilewizardciscomanually.ui:197
#, no-c-format
msgid "Group password:"
msgstr "Groepswachtwoord:"
#: newprofiledialogbase.ui:266 profilecertoptionsbase.ui:194
#, no-c-format
msgid "Certificates path:"
msgstr "Certificaatpad:"
#: newprofiledialogbase.ui:277
#, no-c-format
msgid "Enter here your username"
msgstr "Voer hier uw gebruikersnaam in"
#: newprofiledialogbase.ui:285 profilecertoptionsbase.ui:610
#, no-c-format
msgid "Path to the certificates, used if no absolute path is given."
msgstr ""
"Pad naar certificaten. Word gebruikt als geen absoluut pad is opgegeven"
#: newprofiledialogbase.ui:296 newprofilewizardciscomanually.ui:152
#, no-c-format
msgid "Group password for remote side"
msgstr "Groepswachtwoord voor remote zijde"
#: newprofiledialogbase.ui:318 newprofilewizardpsk.ui:46
#, no-c-format
msgid "Pre-shared key:"
msgstr "Preshared key:"
#: newprofiledialogbase.ui:326 newprofilewizardgeneral.ui:86
#, no-c-format
msgid "Name for the new profile"
msgstr "Naam voor het nieuwe profiel"
#: newprofiledialogbase.ui:351 newprofilewizardgeneral.ui:78
#: profilegeneraloptionsbase.ui:51
#, no-c-format
msgid "VPN gateway:"
msgstr "VPN-gateway:"
#: newprofiledialogbase.ui:359
#, no-c-format
msgid "Save &group password"
msgstr "&Groepswachtwoord opslaan"
#: newprofiledialogbase.ui:365 newprofilewizardciscomanually.ui:75
#, no-c-format
msgid "Save the group password in config file (or in TDEWallet if available)"
msgstr ""
"Bewaar het groepswachtwoord in het configuratiebestand (of in TDEWallet "
"indien beschikbaar)"
#: newprofiledialogbase.ui:373 profilegeneraloptionsbase.ui:59
#, no-c-format
msgid "Connection type:"
msgstr "Verbindingstype:"
#: newprofiledialogbase.ui:381 profilecertoptionsbase.ui:143
#: profilepskoptionsbase.ui:60
#, no-c-format
msgid "Authentication type:"
msgstr "Authenticatietype:"
#: newprofiledialogbase.ui:414 profilegeneraloptionsbase.ui:67
#, no-c-format
msgid "Hostname or IP address of the VPN gateway"
msgstr "Hostnaam of IP-adres voor de VPN-gateway"
#: newprofiledialogbase.ui:425 newprofilewizardgeneral.ui:97
#, no-c-format
msgid "Profile name:"
msgstr "Profielnaam:"
#: newprofiledialogbase.ui:461 newprofilewizardnetwork.ui:82
#: profilenetworkgeneraloptionsbase.ui:235
#, no-c-format
msgid "Network device for use with tunnel"
msgstr "Netwerk apparaat voor tunnel"
#: newprofiledialogbase.ui:464 newprofilewizardnetwork.ui:85
#, no-c-format
msgid ""
"This the the network device which should be used for the tunnel. Its "
"only active if needed. If no selection made, \"default\" is set for "
"using the device where the defaultroute points to."
msgstr ""
"Dit is het netwerkapparaat dat dient te worden gebruikt voor de tunnel."
" Het is alleen actief wanneer het nodig is. Als er geen selectie wordt "
"gemaakt, dan wordt \"default\" ingesteld voor het gebruiken van het "
"apparaat waar de standaardroute naar verwijst."
#: newprofiledialogbase.ui:499 profilecertoptionsbase.ui:168
#: profilepskoptionsbase.ui:85
#, no-c-format
msgid "Authentication type"
msgstr "Authenticatietype"
#: newprofiledialogbase.ui:518
#, no-c-format
msgid ""
"This is the remote network where the connection should going to. Use "
"this at a PPTP connection for set another network than the retrieved IP is "
"located."
msgstr ""
"Dit is het remote netwerk waar de verbinding naar toe moet gaan. Gebruik "
"dit voor een PPTP-verbinding ingesteld op een ander netwerk dan waar het "
"ontvangen IP-adres zich bevindt."
#: newprofiledialogbase.ui:644
#, no-c-format
msgid "Network prefix (netmask)"
msgstr "Netwerkvoorvoegsel (netmasker)"
#: newprofilewizardauthselection.ui:16
#, no-c-format
msgid "Authentication selection"
msgstr "Authenticatieselectie"
#: newprofilewizardauthselection.ui:27
#, no-c-format
msgid "Authentication method"
msgstr "Authenticatiemethode"
#: newprofilewizardauthselection.ui:38
#, fuzzy, no-c-format
msgid "Pre-shared ke&y (shared secret)"
msgstr "&Preshared key (shared secret)"
#: newprofilewizardauthselection.ui:52
#, fuzzy, no-c-format
msgid "&Certificate"
msgstr "&Certificaten"
#: newprofilewizardauthselection.ui:63
#, no-c-format
msgid "&Hybrid"
msgstr ""
#: newprofilewizardcert.ui:51 profilesmartcardoptionsbase.ui:67
#, fuzzy, no-c-format
msgid "Enable PKCS&11 smartcard support"
msgstr "Ondersteuning voor PKCS&11 smartcard activeren"
#: newprofilewizardcert.ui:54 newprofilewizardfreeswan.ui:327
#: profileipsecoptionsbase.ui:532 profilepptpoptionsbase.ui:120
#: profilesmartcardoptionsbase.ui:70
#, no-c-format
msgid "Alt+1"
msgstr "Alt+1"
#: newprofilewizardcert.ui:95 profilecertoptionsbase.ui:178
#, no-c-format
msgid "Path to the private key file"
msgstr "Pad naar bestand met private sleutel"
#: newprofilewizardcert.ui:106
#, no-c-format
msgid "Special certificate file"
msgstr "Speciaal certificaatbestand"
#: newprofilewizardcert.ui:117 profilecertoptionsbase.ui:494
#, no-c-format
msgid "Passphrase to decrypt the private key"
msgstr "Wachtwoord om private sleutel te ontcijferen"
#: newprofilewizardcert.ui:128
#, no-c-format
msgid "Global certificates path used if no absolute path is given"
msgstr "Gebruikt globaal certificaatpad als er geen absoluut pad is opgegeven"
#: newprofilewizardcert.ui:131
#, no-c-format
msgid ""
"In this directory certificates will be searched if no absolute path is "
"given."
msgstr ""
"In deze directory zullen certificaten worden opgezocht als er geen "
"absoluut pad is opgegeven."
#: newprofilewizardcert.ui:139 profilecertoptionsbase.ui:397
#, no-c-format
msgid "CA certificate path"
msgstr "Pad naar CA-certificaat"
#: newprofilewizardcert.ui:161 profilecertoptionsbase.ui:235
#, no-c-format
msgid "Path to the certificate file"
msgstr "Pad naar certificaatbestand"
#: newprofilewizardcert.ui:254 profilecertoptionsbase.ui:545
#, fuzzy, no-c-format
msgid "CA certificate:"
msgstr "CA-certificaat"
#: newprofilewizardcert.ui:289 profilecertoptionsbase.ui:580
#, no-c-format
msgid "&Use special server certificate"
msgstr "Speciaal servercertificaat gebr&uiken"
#: newprofilewizardcert.ui:330 profilecertoptionsbase.ui:362
#, no-c-format
msgid "Private key path:"
msgstr "Pad naar private sleutel:"
#: newprofilewizardcert.ui:397 profilesmartcardoptionsbase.ui:113
#, fuzzy, no-c-format
msgid "PKCS11 smartcard"
msgstr "Ondersteuning voor PKCS&11 smartcard activeren"
#: newprofilewizardcert.ui:424 profilesmartcardoptionsbase.ui:370
#, no-c-format
msgid "Use token provider &library:"
msgstr ""
#: newprofilewizardcert.ui:453 newprofilewizardcert.ui:499
#: profilesmartcardoptionsbase.ui:284 profilesmartcardoptionsbase.ui:330
#, fuzzy, no-c-format
msgid "Detect"
msgstr "Verwijderen?"
#: newprofilewizardcert.ui:461 profilesmartcardoptionsbase.ui:292
#, no-c-format
msgid "Slot"
msgstr ""
#: newprofilewizardcert.ui:547 profilesmartcardoptionsbase.ui:148
#, fuzzy, no-c-format
msgid "Slot type"
msgstr "Importtype:"
#: newprofilewizardcert.ui:600 profilesmartcardoptionsbase.ui:209
#, no-c-format
msgid "Sign mode"
msgstr ""
#: newprofilewizardcert.ui:655 newprofilewizardfreeswan.ui:166
#: newprofilewizardfreeswan.ui:576 newprofilewizardracoon.ui:498
#: newprofilewizardracoon.ui:620 profileipsecoptionsbase.ui:882
#: profileipsecoptionsbase.ui:967 profileracoonoptionsbase.ui:522
#: profileracoonoptionsbase.ui:658 profilesmartcardoptionsbase.ui:264
#, fuzzy, no-c-format
msgid "ID type"
msgstr "Importtype:"
#: newprofilewizardciscomanually.ui:16
#, no-c-format
msgid "New profile wizard cisco"
msgstr "Nieuw-profiel-assistent Cisco"
#: newprofilewizardciscomanually.ui:69
#, no-c-format
msgid "Save group &password"
msgstr "Groepswachtwoord o&pslaan"
#: newprofilewizardciscomanually.ui:100
#, no-c-format
msgid "Cisco specific settings"
msgstr "Cisco-specifieke instellingen"
#: newprofilewizardciscomanually.ui:108
#, no-c-format
msgid "A&llow empty group password (insecure!)"
msgstr "Leeg groepswachtwoord toestaan (onvei&lig!)"
#: newprofilewizardciscomanually.ui:114 profileciscooptionsbase.ui:548
#, no-c-format
msgid "Allow an empty group password (not recommended, insecure)"
msgstr "Sta een leeg groepswachtwoord toe (niet aanbevolen, onveilig)"
#: newprofilewizardciscopcfimport.ui:16
#, no-c-format
msgid "Form1"
msgstr "Form1"
#: newprofilewizardciscoselection.ui:27 newprofilewizardopenvpnselection.ui:27
#, no-c-format
msgid "Import or configure manually"
msgstr "Handmatig configureren of importeren"
#: newprofilewizardciscoselection.ui:38
#, no-c-format
msgid "&Import PCF file"
msgstr "PCF-bestand &importeren"
#: newprofilewizardciscoselection.ui:52
#, no-c-format
msgid "Enter data manuall&y"
msgstr "Gegevens &handmatig invoeren"
#: newprofilewizardconnectionstatuscheck.ui:46
#, no-c-format
msgid "Use connection status c&heck"
msgstr "Verbindingsstat&uscontrole gebruiken"
#: newprofilewizardconnectionstatuscheck.ui:55
#: profilenetworkgeneraloptionsbase.ui:627
#, no-c-format
msgid "Test if the connection is allive by pinging the gateway"
msgstr "Test of de verbinding actief is door de gateway te pingen"
#: newprofilewizardconnectionstatuscheck.ui:58
#, no-c-format
msgid ""
"If checked, the connection status check will be enabled. The parameters "
"below control how often the gateway will be pinged. It must be minimal "
"success in a count. Example: interval: 1, success count: 4, means that 4 "
"pings will be done and minimal one must be success for keep the "
"connection alive. The delay between the pings are 1 second."
msgstr ""
"Indien geselecteerd zal de controle van de verbindingsstatus worden "
"geactiveerd. De parameters hieronder bepalen hoe vaak de gateway zal "
"worden gepingd. Er dient een minimaal aantal succesvolle pings voor te komen."
" Voorbeeld: interval: 1, aantal succesvol:4, betekent dat er vier pings "
"zullen worden uitgevoerd en minimaal een succesvol dient te zijn om de "
"verbinding in stand te houden. De vertraging tussen de pings is 1 seconde."
#: newprofilewizardconnectionstatuscheck.ui:135
#: profilenetworkgeneraloptionsbase.ui:758
#, no-c-format
msgid "Success count:"
msgstr "Aantal succesvol:"
#: newprofilewizardconnectionstatuscheck.ui:160
#: profilenetworkgeneraloptionsbase.ui:699
#, no-c-format
msgid "Interval:"
msgstr "Interval:"
#: newprofilewizardconnectionstatuscheck.ui:181
#: profilenetworkgeneraloptionsbase.ui:660
#, no-c-format
msgid "Reconnect after connection &lost"
msgstr "Opnieuw verbinden als de verbinding is ver&broken"
#: newprofilewizardconnectionstatuscheck.ui:190
#: profilenetworkgeneraloptionsbase.ui:669
#, no-c-format
msgid "Reconnect automatically after the connection is lost"
msgstr "Automatisch opnieuw verbinden als de verbinding is verbroken"
#: newprofilewizardconnectionstatuscheck.ui:231
#, no-c-format
msgid "Use specified &address to ping:"
msgstr "Gebruikergedefinieerd &adres om te pingen:"
#: newprofilewizardconnectionstatuscheck.ui:234
#: profilecmdexecbeforedisconnectoptionsbase.ui:38
#, no-c-format
msgid "Alt+A"
msgstr "Alt+A"
#: newprofilewizardconnectionstatuscheck.ui:237
#, no-c-format
msgid ""
"Use specified address instead the gateway address to test the connection "
"status"
msgstr ""
"Gebruik het door de gebruiker opgegeven adres in plaats van het adres "
"van de gateway om de verbindingsstatus te controleren."
#: newprofilewizardconnectionstatuscheck.ui:251
#, no-c-format
msgid "IP address for ping test"
msgstr "IP-adres voor ping-test"
#: newprofilewizardconnectionstatuscheck.ui:254
#, no-c-format
msgid "This is the IP address which should be tested."
msgstr "Dit is het IP-adres dat u wilt testen."
#: newprofilewizardconnectoptions.ui:43
#, no-c-format
msgid "Connect after creating ne&w profile"
msgstr "Verbinden na aanmaken van nieu&w profiel"
#: newprofilewizardconnectoptions.ui:81
#, no-c-format
msgid "&Connect automatically at startup:"
msgstr "&Automatisch verbinden bij opstarten:"
#: newprofilewizardconnectoptions.ui:90
#, no-c-format
msgid "Connect after start to a selected profile"
msgstr "Na opstarten verbinden met een geselecteerd profiel"
#: newprofilewizardconnectoptions.ui:93
#, no-c-format
msgid "Enable this to let kvpnc connect to given profile at startup"
msgstr ""
"Activeer dit om kpvnc te laten verbinden met het opgeven profiel tijdens het "
"opstarten"
#: newprofilewizardconnectoptions.ui:118
#, no-c-format
msgid "Select profile to use"
msgstr "Selecteer het te gebruiken profiel"
#: newprofilewizardfreeswan.ui:16
#, no-c-format
msgid "Setup FreeS/WAN"
msgstr "FreeS/WAN instellen"
#: newprofilewizardfreeswan.ui:54 newprofilewizardracoon.ui:438
#: profileipsecoptionsbase.ui:371 profileracoonoptionsbase.ui:815
#, fuzzy, no-c-format
msgid "Authenticate &with username and password (XAUTH)"
msgstr "Authenticeren met gebruikersnaam en wachtwoord"
#: newprofilewizardfreeswan.ui:60 newprofilewizardracoon.ui:444
#: profileipsecoptionsbase.ui:377 profileracoonoptionsbase.ui:821
#, fuzzy, no-c-format
msgid "enable this if you want enable the XAUTh extension"
msgstr "Schakel dit in als u de debugconsole wilt zien"
#: newprofilewizardfreeswan.ui:95 profileipsecoptionsbase.ui:244
#, no-c-format
msgid "Use &Mode Configuration"
msgstr "&Modusconfiguratie gebruiken"
#: newprofilewizardfreeswan.ui:123
#, fuzzy, no-c-format
msgid "Use Perfect for&ward secrecy (PFS)"
msgstr "Perfect forward secrety (PFS) gebruiken"
#: newprofilewizardfreeswan.ui:139 newprofilewizardracoon.ui:471
#: profileipsecoptionsbase.ui:940 profileracoonoptionsbase.ui:495
#, fuzzy, no-c-format
msgid "Remote identifier"
msgstr "Netwerk op afstand"
#: newprofilewizardfreeswan.ui:199 newprofilewizardfreeswan.ui:609
#: newprofilewizardracoon.ui:531 newprofilewizardracoon.ui:653
#: profileracoonoptionsbase.ui:555 profileracoonoptionsbase.ui:691
#, no-c-format
msgid "Value for the local ID"
msgstr ""
#: newprofilewizardfreeswan.ui:215 newprofilewizardfreeswan.ui:625
#: newprofilewizardracoon.ui:547 newprofilewizardracoon.ui:669
#: profileipsecoptionsbase.ui:833 profileipsecoptionsbase.ui:1016
#: profileracoonoptionsbase.ui:571 profileracoonoptionsbase.ui:707
#, no-c-format
msgid "ID value"
msgstr ""
#: newprofilewizardfreeswan.ui:245 newprofilewizardfreeswan.ui:256
#: newprofilewizardfreeswan.ui:655 newprofilewizardfreeswan.ui:666
#: newprofilewizardfreeswan.ui:829 newprofilewizardfreeswan.ui:840
#: profileipsecoptionsbase.ui:141 profileipsecoptionsbase.ui:152
#: profileipsecoptionsbase.ui:912 profileipsecoptionsbase.ui:923
#: profileipsecoptionsbase.ui:1046 profileipsecoptionsbase.ui:1057
#: profileracoonoptionsbase.ui:601 profileracoonoptionsbase.ui:612
#: profileracoonoptionsbase.ui:737 profileracoonoptionsbase.ui:748
#, no-c-format
msgid ""
"This is the type of the local ID (default: asn1dn) \n"
"\n"
"- asn1dn - the type is an ASN.1 distinguished name. Use 'use email address "
"as identifier' in certificate settings if it should be the mail address. If "
"this option is not checked, the DN from the Subject field in the certificate "
"will be used.
\n"
"- address - the type is the IP address.
\n"
"- fqdn - the type is a FQDN (fully-qualified domain name).
\n"
"- keyid - the type is a KEY_ID (file)
\n"
"- user_fqdn - the type is a USER_FQDN (user fully-qualified domain name)."
"li> \n"
"
"
msgstr ""
#: newprofilewizardfreeswan.ui:291
#, no-c-format
msgid "Use custom IKE"
msgstr ""
#: newprofilewizardfreeswan.ui:313
#, no-c-format
msgid "aes25&6-sha1"
msgstr ""
#: newprofilewizardfreeswan.ui:316 newprofilewizardtypeselection.ui:90
#, fuzzy, no-c-format
msgid "Alt+6"
msgstr "Alt+T"
#: newprofilewizardfreeswan.ui:324 profileipsecoptionsbase.ui:529
#, no-c-format
msgid "aes&128-sha1"
msgstr ""
#: newprofilewizardfreeswan.ui:335
#, no-c-format
msgid "3des-sha1-modp20&48"
msgstr ""
#: newprofilewizardfreeswan.ui:338 newprofilewizardpptp.ui:313
#, fuzzy, no-c-format
msgid "Alt+4"
msgstr "Alt+T"
#: newprofilewizardfreeswan.ui:346 newprofilewizardfreeswan.ui:450
#: profileipsecoptionsbase.ui:551 profileipsecoptionsbase.ui:696
#, no-c-format
msgid "3des-sha1"
msgstr ""
#: newprofilewizardfreeswan.ui:357 profileipsecoptionsbase.ui:562
#, no-c-format
msgid "&3des-md5"
msgstr ""
#: newprofilewizardfreeswan.ui:360 profileipsecoptionsbase.ui:565
#, fuzzy, no-c-format
msgid "Alt+3"
msgstr "Alt+I"
#: newprofilewizardfreeswan.ui:376 newprofilewizardfreeswan.ui:477
#: profileipsecoptionsbase.ui:581 profileipsecoptionsbase.ui:723
#, fuzzy, no-c-format
msgid "other:"
msgstr "overig"
#: newprofilewizardfreeswan.ui:403
#, no-c-format
msgid "Use custom ESP"
msgstr ""
#: newprofilewizardfreeswan.ui:428 profileipsecoptionsbase.ui:738
#, no-c-format
msgid "aes2&56-sha1"
msgstr ""
#: newprofilewizardfreeswan.ui:431 profileipsecoptionsbase.ui:741
#, fuzzy, no-c-format
msgid "Alt+5"
msgstr "Alt+I"
#: newprofilewizardfreeswan.ui:439 profileipsecoptionsbase.ui:685
#, no-c-format
msgid "aes12&8-sha1"
msgstr ""
#: newprofilewizardfreeswan.ui:442 profileipsecoptionsbase.ui:688
#, no-c-format
msgid "Alt+8"
msgstr "Alt+8"
#: newprofilewizardfreeswan.ui:461 profileipsecoptionsbase.ui:707
#, no-c-format
msgid "3des-md5"
msgstr ""
#: newprofilewizardfreeswan.ui:506 profileipsecoptionsbase.ui:301
#, fuzzy, no-c-format
msgid "&Use right next hop:"
msgstr "Volgende hop rechts:"
#: newprofilewizardfreeswan.ui:525 profileipsecoptionsbase.ui:290
#, fuzzy, no-c-format
msgid "Use &left next hop:"
msgstr "Volgende hop links:"
#: newprofilewizardfreeswan.ui:549 newprofilewizardracoon.ui:593
#: profileipsecoptionsbase.ui:814 profileracoonoptionsbase.ui:631
#, no-c-format
msgid "Local identifier"
msgstr ""
#: newprofilewizardfreeswan.ui:693 profileipsecoptionsbase.ui:333
#, no-c-format
msgid "Disable opportunistic encr&yption"
msgstr "Opportunistische versle&uteling uitschakelen"
#: newprofilewizardfreeswan.ui:748 newprofilewizardracoon.ui:159
#: profileipsecoptionsbase.ui:85 profileracoonoptionsbase.ui:103
#, no-c-format
msgid "Internet Key Exchange mode"
msgstr "Internet Key Exchange-modus"
#: newprofilewizardfreeswan.ui:764 profileipsecoptionsbase.ui:111
#, no-c-format
msgid "IPsec VPN mode:"
msgstr ""
#: newprofilewizardgeneral.ui:16
#, no-c-format
msgid "New profile wizard general"
msgstr "Nieuwe-profiel-assistent algemeen"
#: newprofilewizardgeneral.ui:67
#, no-c-format
msgid "Hostname or IP address of the VPN gateway to connect"
msgstr "Hostnaam of IP-adres van de VPN-gateway om mee te verbinden"
#: newprofilewizardnat.ui:51
#, fuzzy, no-c-format
msgid "Use UDP"
msgstr "PFS &uitschakelen"
#: newprofilewizardnat.ui:57
#, no-c-format
msgid ""
"For IPSec use UDP encapsulation (NAT-T). For openvpn use UDP instead of "
"TCP protocol."
msgstr ""
"Voor IPSec, gebruik UDP-encapsulation (NAT-T). Voor openvpn, gebruik UDP "
"in plaats van TCP."
#: newprofilewizardnat.ui:60 profilenetworknatoptionsbase.ui:68
#, fuzzy, no-c-format
msgid ""
"For openvpn this causes using UDP instead of TCP protocol (peer have to "
"use the same protocol)."
msgstr ""
"U dient dit te activeren voor IPSec als u zich achter een firewall (NAT) "
"bevindt. Voor openvpn moet dan het UDP- in plaats van het TCP-protocol "
"wordt gebruikt (peer dient hetzelfde protocol te gebruiken)."
#: newprofilewizardnat.ui:85 profilenetworknatoptionsbase.ui:95
#, fuzzy, no-c-format
msgid "Use NAT"
msgstr "UDP (NAT-T) gebruiken"
#: newprofilewizardnat.ui:88 profilenetworknatoptionsbase.ui:98
#, fuzzy, no-c-format
msgid "Enable NAT support"
msgstr "geen gesplitste dns-ondersteuning"
#: newprofilewizardnat.ui:91 profilenetworknatoptionsbase.ui:101
#, no-c-format
msgid "You should enable this if you behind a firewall"
msgstr ""
#: newprofilewizardnat.ui:112
#, no-c-format
msgid "&UDP Encapsulation Port:"
msgstr ""
#: newprofilewizardnat.ui:118 profilenetworknatoptionsbase.ui:135
#, no-c-format
msgid "Use specified port number for IPSec NAT-T"
msgstr "Opgegeven poortnummer gebruiken voor IPSec NAT-T"
#: newprofilewizardnat.ui:138 profilenetworknatoptionsbase.ui:155
#, no-c-format
msgid "UDP port for NAT-T"
msgstr "UDP-poort voor NAT-T"
#: newprofilewizardnetwork.ui:71 profilenetworkgeneraloptionsbase.ui:199
#, no-c-format
msgid "Network device"
msgstr "Netwerkapparaat"
#: newprofilewizardnetwork.ui:95 profilenetworkgeneraloptionsbase.ui:158
#, fuzzy, no-c-format
msgid "&Use remote network"
msgstr "Netwerk op afstand"
#: newprofilewizardnetwork.ui:303
#, fuzzy, no-c-format
msgid "Userdefined &MTU:"
msgstr "Gebruikergedefinieerde &MTU:"
#: newprofilewizardnetwork.ui:309 newprofilewizardnetwork.ui:366
#: profilenetworkgeneraloptionsbase.ui:49
#, no-c-format
msgid "Check this to set a custom MTU size"
msgstr "Selecteer dit om zelf de MTU-grootte op te geven"
#: newprofilewizardnetwork.ui:360 profilenetworkgeneraloptionsbase.ui:100
#, fuzzy, no-c-format
msgid "Userdefined M&RU:"
msgstr "Gebruikergedefinieerde &MTU:"
#: newprofilewizardnetworkroute.ui:24
#, fuzzy, no-c-format
msgid "New profile wizard Network Route Options"
msgstr "Nieuw-profiel-assistent typeselectie"
#: newprofilewizardnetworkroute.ui:88 profilenetworkrouteoptionsbase.ui:88
#, fuzzy, no-c-format
msgid "&Use additional network routes"
msgstr "&Aanvullende netwerkroutes gebruiken"
#: newprofilewizardnetworkroute.ui:108 profilenetworkrouteoptionsbase.ui:108
#, no-c-format
msgid "Netmask"
msgstr "Netmasker"
#: newprofilewizardnetworkroute.ui:130 profilenetworkrouteoptionsbase.ui:130
#, fuzzy, no-c-format
msgid "Device"
msgstr "Apparaat: %1"
#: newprofilewizardnetworkroute.ui:152 profilenetworkrouteoptionsbase.ui:152
#, no-c-format
msgid "List of additional network routes"
msgstr "Lijst met aanvullende netwerkroutes"
#: newprofilewizardnetworkroute.ui:188 profilenetworkrouteoptionsbase.ui:205
#, no-c-format
msgid "Add &route..."
msgstr "&Route toevoegen..."
#: newprofilewizardnetworkroute.ui:194 profilenetworkrouteoptionsbase.ui:194
#: profilenetworkrouteoptionsbase.ui:211
#, no-c-format
msgid "Add new route"
msgstr "Nieuwe route toevoegen"
#: newprofilewizardnetworkroute.ui:205 profilenetworkrouteoptionsbase.ui:222
#, fuzzy, no-c-format
msgid "De&lete"
msgstr "Verwijderen?"
#: newprofilewizardnetworkroute.ui:211 profilenetworkrouteoptionsbase.ui:228
#, no-c-format
msgid "Delete route"
msgstr "Route verwijderen"
#: newprofilewizardopenvpn.ui:17 newprofilewizardopenvpnauth.ui:17
#, no-c-format
msgid "New profile wizard OpenVPN"
msgstr "Nieuwe-profiel-assistent OpenVPN"
#: newprofilewizardopenvpn.ui:36
#, no-c-format
msgid "OpenVPN specific settings"
msgstr "OpenVPN-specifieke instellingen"
#: newprofilewizardopenvpn.ui:55 profileopenvpnoptionsbase.ui:651
#, no-c-format
msgid "Common name, X509 name or common name prefix"
msgstr "Algemene naam, X509-naam of algemene naamvoorvoegsel"
#: newprofilewizardopenvpn.ui:63
#, no-c-format
msgid ""
"Type of tunnel device for virtual network. Use tun for routed network, and "
"tap for ethernet bridging."
msgstr ""
"Het type tunnelapparaat voor het virtuele netwerk. Gebruik tun voor een "
"gerouterd netwerk, en tap voor ethernet-bridging."
#: newprofilewizardopenvpn.ui:66
#, no-c-format
msgid ""
"This is the type of your tunnel device. It can be tun (virtual Point-to-"
"Point network device) or tap (virtual ethernet network device). Your "
"administrator will tell you which you have to use. Default is to use the tun "
"device."
msgstr ""
"Dit is het type tunnelapparaat dat u gebruikt. Het kan tun zijn (virtueel "
"point-to-point netwerkapparaat) of tap (virtueel ethernet netwerkapparaat). "
"Uw systeembeheerder kan u vertellen welke u dient te gebruiken. Standaard is "
"het tun-apparaat."
#: newprofilewizardopenvpn.ui:77 newprofilewizardopenvpnauth.ui:186
#: profileopenvpnoptionsbase.ui:461
#, no-c-format
msgid "Cipher algorithm"
msgstr "Versleutelingsalgoritme"
#: newprofilewizardopenvpn.ui:93
#, no-c-format
msgid "Use TLS auth:"
msgstr "TLS-authenticatie gebruiken:"
#: newprofilewizardopenvpn.ui:99 profileopenvpnoptionsbase.ui:725
#, no-c-format
msgid "Add an additional TLS authentication"
msgstr "Voeg een aanvullende TLS-authenticatie toe"
#: newprofilewizardopenvpn.ui:134
#, fuzzy, no-c-format
msgid "Use specified remote port:"
msgstr "Opgegeven remote poort gebr&uiken:"
#: newprofilewizardopenvpn.ui:137 profileopenvpnoptionsbase.ui:95
#: profilesshoptionsbase.ui:49 profilesshoptionsbase.ui:110
#, no-c-format
msgid "Use non standard TCP/UDP port"
msgstr "Niet-standaard TCP/UDP-poort gebruiken"
#: newprofilewizardopenvpn.ui:164
#, no-c-format
msgid "Certificate type"
msgstr "Certificaattype"
#: newprofilewizardopenvpn.ui:175
#, no-c-format
msgid "File name of the static key or passphrase file"
msgstr "Bestandsnaam van de statische sleutel of het wachtwoordbestand"
#: newprofilewizardopenvpn.ui:191 profileopenvpnoptionsbase.ui:623
#, no-c-format
msgid "Accept onl&y peer with common name:"
msgstr "Alleen peer met algemene naam ac&cepteren:"
#: newprofilewizardopenvpn.ui:197 profileopenvpnoptionsbase.ui:629
#, no-c-format
msgid ""
"Accept connections only from a host with X509 name or common name equal "
"to specified name"
msgstr ""
"Alleen verbindingen accepteren van een host met een X509-naam of "
"algemene naam die gelijk is aan de opgegeven naam"
#: newprofilewizardopenvpn.ui:232 profileopenvpnoptionsbase.ui:145
#, no-c-format
msgid "Allow IP address change of peer (for DHCP)"
msgstr ""
#: newprofilewizardopenvpn.ui:274 profileopenvpnoptionsbase.ui:70
#: profileopenvpnoptionsbase.ui:126 profilesshoptionsbase.ui:86
#, no-c-format
msgid "Port number"
msgstr "Poortnummer"
#: newprofilewizardopenvpn.ui:290 profileopenvpnoptionsbase.ui:103
#, no-c-format
msgid "Disable L&ZO compression"
msgstr "L&ZO-compressie uitschakelen"
#: newprofilewizardopenvpn.ui:331 profileopenvpnoptionsbase.ui:257
#, no-c-format
msgid "Use specified cipher:"
msgstr "Opgegeven versleuteling gebruiken:"
#: newprofilewizardopenvpn.ui:334 profileopenvpnoptionsbase.ui:260
#, no-c-format
msgid "Use non standard cipher algorithm"
msgstr "Niet-standaard versleutelingsalgoritme gebruiken"
#: newprofilewizardopenvpn.ui:407 profileopenvpnoptionsbase.ui:592
#, no-c-format
msgid "Re&quire peer ns cert type:"
msgstr "peer ns certificaatt&ype vereisen:"
#: newprofilewizardopenvpn.ui:413 profileopenvpnoptionsbase.ui:598
#, no-c-format
msgid ""
"Require that peer certificate was signed with an explicit nsCertType "
"destination of \"client\" or \"server\""
msgstr ""
"Vereis dat het peer-certificaat is ondertekend met een expliciete ns-"
"certificaattype-bestemming van \"client\" of \"server\""
#: newprofilewizardopenvpn.ui:464 newprofilewizardopenvpn.ui:561
#: profilenetworkhttpproxyoptionsbase.ui:99
#: profilenetworkhttpproxyoptionsbase.ui:113
#: profilenetworkhttpproxyoptionsbase.ui:127
#: profilenetworkhttpproxyoptionsbase.ui:265
#: profilenetworkhttpproxyoptionsbase.ui:276
#: profilenetworkhttpproxyoptionsbase.ui:351
#, no-c-format
msgid "Name or IP address of the proxy server"
msgstr "Naam of IP-adres van de proxyserver"
#: newprofilewizardopenvpn.ui:483 profilenetworkhttpproxyoptionsbase.ui:138
#, no-c-format
msgid "Timeout"
msgstr "Timeout"
#: newprofilewizardopenvpn.ui:486 newprofilewizardopenvpn.ui:517
#: profilenetworkhttpproxyoptionsbase.ui:141
#: profilenetworkhttpproxyoptionsbase.ui:249
#, no-c-format
msgid "Timeout in seconds"
msgstr "Timeout in seconden"
#: newprofilewizardopenvpn.ui:530 profilenetworkhttpproxyoptionsbase.ui:82
#, no-c-format
msgid "Port"
msgstr "Poort"
#: newprofilewizardopenvpn.ui:533 newprofilewizardopenvpn.ui:640
#: profilenetworkhttpproxyoptionsbase.ui:85
#: profilenetworkhttpproxyoptionsbase.ui:321
#, no-c-format
msgid "Proxy server port number"
msgstr "Poortnummer van proxyserver"
#: newprofilewizardopenvpn.ui:541
#, no-c-format
msgid "Use &HTTP proxy"
msgstr "&HTTP-proxy gebruiken"
#: newprofilewizardopenvpn.ui:547 profilenetworkhttpproxyoptionsbase.ui:49
#: profilenetworkhttpproxyoptionsbase.ui:340
#, no-c-format
msgid "Connect via HTTP proxy"
msgstr "Verbinden via HTTP-proxy"
#: newprofilewizardopenvpn.ui:558 profilenetworkhttpproxyoptionsbase.ui:96
#, no-c-format
msgid "Host"
msgstr "Host"
#: newprofilewizardopenvpnauth.ui:60 profileopenvpnoptionsbase.ui:686
#, no-c-format
msgid "Authenticate &with username and password"
msgstr "Authenticeren met gebruikersnaam en &wachtwoord"
#: newprofilewizardopenvpnauth.ui:66 profileopenvpnoptionsbase.ui:615
#, no-c-format
msgid "Authenticate with server using username and password"
msgstr "Met server authenticeren met behulp van gebruikersnaam en wachtwoord"
#: newprofilewizardopenvpnauth.ui:104
#, fuzzy, no-c-format
msgid "Use onl&y CA cert and authenticate with username and password"
msgstr ""
"Alleen CA-certificaat gebruiken en authenticeren met gebruikersnaam en "
"wachtwoord"
#: newprofilewizardopenvpnauth.ui:153 profileopenvpnoptionsbase.ui:570
#, fuzzy, no-c-format
msgid "Use authentication method:"
msgstr "Authenticatiemethode"
#: newprofilewizardopenvpnauth.ui:156 profileopenvpnoptionsbase.ui:573
#, fuzzy, no-c-format
msgid "Use non standard authentication algorithm"
msgstr "Niet-standaard versleutelingsalgoritme gebruiken"
#: newprofilewizardopenvpnselection.ui:38
#, no-c-format
msgid "Import &OpenVPN config file"
msgstr "&OpenVPN-configuratiebestand importeren"
#: newprofilewizardopenvpnselection.ui:52
#, no-c-format
msgid "Enter data &manually"
msgstr "Gegevens hand&matig invoeren"
#: newprofilewizardp12certselection.ui:16
#, no-c-format
msgid "P12 certificate selection"
msgstr "Selectie van P12-certificaat"
#: newprofilewizardp12certselection.ui:43
#, fuzzy, no-c-format
msgid "Enable PKCS11 s&martcard support"
msgstr "Ondersteuning voor PKCS&11 smartcard activeren"
#: newprofilewizardp12certselection.ui:57
#, no-c-format
msgid "Certificate in PKCS12 format?"
msgstr "Certificaat is in PKCS12-opmaak?"
#: newprofilewizardp12certselection.ui:60
#, no-c-format
msgid ""
"Choose yes, if you have a file named: *.p12. It will be converted for use "
"with KVpnc."
msgstr ""
"Kies ja als u een bestand genaamd *.p12 hebt. Het zal worden geconverteerd "
"voor gebruik met KVpnc."
#: newprofilewizardp12certselection.ui:71
#, no-c-format
msgid "&No"
msgstr "&Nee"
#: newprofilewizardp12certselection.ui:74 profileciscooptionsbase.ui:523
#, no-c-format
msgid "Alt+N"
msgstr "Alt+N"
#: newprofilewizardp12certselection.ui:82
#, no-c-format
msgid "&Yes"
msgstr "&Ja"
#: newprofilewizardpptp.ui:16
#, no-c-format
msgid "New profile wizard PPTP"
msgstr "Nieuw-profiel-assistent PPTP"
#: newprofilewizardpptp.ui:43
#, fuzzy, no-c-format
msgid "DNS options"
msgstr "PSK-opties"
#: newprofilewizardpptp.ui:54 profilepptpoptionsbase.ui:567
#, no-c-format
msgid "Use specified DNS server:"
msgstr "Gebruikergedefinieerde DNS-server:"
#: newprofilewizardpptp.ui:57 newprofilewizardpptp.ui:82
#: newprofilewizardpptp.ui:121 profilepptpoptionsbase.ui:570
#: profilepptpoptionsbase.ui:595 profilepptpoptionsbase.ui:606
#, no-c-format
msgid "Use specified DNS server instead of retrieved from peer"
msgstr "Opgegeven DNS-server gebruiken in plaats van ontvangen van peer"
#: newprofilewizardpptp.ui:71 newprofilewizardpptp.ui:96
#: newprofilewizardpptp.ui:110 profilepptpoptionsbase.ui:559
#: profilepptpoptionsbase.ui:584 profilepptpoptionsbase.ui:620
#, no-c-format
msgid "IP address of the DNS server (no hostname)"
msgstr "IP-adres van de DNS-server (geen hostnaam)"
#: newprofilewizardpptp.ui:79 profilepptpoptionsbase.ui:603
#, fuzzy, no-c-format
msgid "Use specified DNS search domain:"
msgstr "Gebruikergedefinieerde DNS-server:"
#: newprofilewizardpptp.ui:118 profilepptpoptionsbase.ui:592
#, fuzzy, no-c-format
msgid "Use specified DNS domain:"
msgstr "Gebruikergedefinieerde DNS-server:"
#: newprofilewizardpptp.ui:131
#, fuzzy, no-c-format
msgid "PPP options"
msgstr "PSK-opties"
#: newprofilewizardpptp.ui:142 profilepptpoptionsbase.ui:212
#, no-c-format
msgid "Disable CCP negotiation"
msgstr "CCP-onderhandeling uitschakelen"
#: newprofilewizardpptp.ui:148 profilepptpoptionsbase.ui:218
#, fuzzy, no-c-format
msgid "Disable Compression Control Protocol negotiation"
msgstr "Compression Control Protocol-onderhandeling uitschakelen"
#: newprofilewizardpptp.ui:151 profilepptpoptionsbase.ui:221
#, no-c-format
msgid ""
"Check to disabe CCP (Compression Control Protocol) negotiation. This option "
"should only be required if the peer is buggy and gets confused by requests "
"from pppd for CCP negotiation."
msgstr ""
"Selecteer dit om CCP (Compression Control Protocol) -onderhandeling uit te "
"schakelen. Deze optie is alleen nodig als de peer buggy is en in de war "
"raakt door verzoeken van ppd voor CCP-onderhandeling."
#: newprofilewizardpptp.ui:159 profilepptpoptionsbase.ui:198
#, no-c-format
msgid "Do not use deflate met&hod"
msgstr "Geen deflate-met&hode gebruiken"
#: newprofilewizardpptp.ui:165 profilepptpoptionsbase.ui:204
#, no-c-format
msgid "Do not use deflate decompression method (disabled by default)"
msgstr "Gebruik geen deflate-decompressiemethode (standaard uitgeschakeld)"
#: newprofilewizardpptp.ui:173 profilepptpoptionsbase.ui:339
#, fuzzy, no-c-format
msgid "Disable protocol field compression"
msgstr "L&ZO-compressie uitschakelen"
#: newprofilewizardpptp.ui:179 profilepptpoptionsbase.ui:345
#, fuzzy, no-c-format
msgid "Disable protocol field compression negotiation"
msgstr "Compression Control Protocol-onderhandeling uitschakelen"
#: newprofilewizardpptp.ui:182 profilepptpoptionsbase.ui:348
#, no-c-format
msgid ""
"Disable protocol field compression negotiation in both the receive and the "
"transmit direction"
msgstr ""
#: newprofilewizardpptp.ui:190 profilepptpoptionsbase.ui:305
#, fuzzy, no-c-format
msgid "Disable adress control compression"
msgstr "L&ZO-compressie uitschakelen"
#: newprofilewizardpptp.ui:196 profilepptpoptionsbase.ui:311
#, fuzzy, no-c-format
msgid "Disable Address/Control compression in both directions"
msgstr "Compression Control Protocol-onderhandeling uitschakelen"
#: newprofilewizardpptp.ui:199 profilepptpoptionsbase.ui:314
#, no-c-format
msgid ""
"Disable Address/Control compression in both directions (send and receive)."
msgstr ""
#: newprofilewizardpptp.ui:213 profilepptpoptionsbase.ui:280
#, no-c-format
msgid "Do not use BSD compression (disabled by default)"
msgstr "Geen BSD-compressie gebruiken (standaard uitgeschakeld)"
#: newprofilewizardpptp.ui:221 profilepptpoptionsbase.ui:263
#, no-c-format
msgid "Use no IP b&y default"
msgstr "Standaard geen IP &gebruiken"
#: newprofilewizardpptp.ui:238 profilepptpoptionsbase.ui:328
#, fuzzy, no-c-format
msgid "Disables the magic number negotiation"
msgstr "CCP-onderhandeling uitschakelen"
#: newprofilewizardpptp.ui:241 profilepptpoptionsbase.ui:331
#, no-c-format
msgid ""
"Disable magic number negotiation. With this option, pppd cannot detect a "
"looped-back line. This option should only be needed if the peer is buggy."
msgstr ""
#: newprofilewizardpptp.ui:249 profilepptpoptionsbase.ui:288
#, fuzzy, no-c-format
msgid "Disable TCP/IP header compression"
msgstr "L&ZO-compressie uitschakelen"
#: newprofilewizardpptp.ui:255 profilepptpoptionsbase.ui:294
#, no-c-format
msgid "Disables the Van Jacobson style TCP/IP header compression"
msgstr ""
#: newprofilewizardpptp.ui:258 profilepptpoptionsbase.ui:297
#, no-c-format
msgid ""
"Disables the Van Jacobson style TCP/IP header compression in both the "
"transmit and the receive direction."
msgstr ""
#: newprofilewizardpptp.ui:266 profilepptpoptionsbase.ui:246
#, fuzzy, no-c-format
msgid "Disable IPX"
msgstr "PFS uitschake&len"
#: newprofilewizardpptp.ui:272 profilepptpoptionsbase.ui:252
#, no-c-format
msgid "Disables the IPXCP and IPX protocols"
msgstr ""
#: newprofilewizardpptp.ui:275 profilepptpoptionsbase.ui:255
#, fuzzy, no-c-format
msgid ""
"Disables the IPXCP and IPX protocols. This option should only be required if "
"the peer is buggy and gets confused by requests from pppd for IPXCP "
"negotiation."
msgstr ""
"Selecteer dit om CCP (Compression Control Protocol) -onderhandeling uit te "
"schakelen. Deze optie is alleen nodig als de peer buggy is en in de war "
"raakt door verzoeken van ppd voor CCP-onderhandeling."
#: newprofilewizardpptp.ui:285
#, fuzzy, no-c-format
msgid "MPPE options"
msgstr "PSK-opties"
#: newprofilewizardpptp.ui:302 profilepptpoptionsbase.ui:81
#, no-c-format
msgid "Require Microsoft Point-To-Point Encrpytion (enabled by default)"
msgstr ""
"Microsoft Point-To-Point-versleuteling vereisen (standaard ingeschakeld)"
#: newprofilewizardpptp.ui:316 profilepptpoptionsbase.ui:109
#, no-c-format
msgid "Refuse 40 bit length encryption of MPPE"
msgstr "40-bits versleuteling van MPPE weigeren"
#: newprofilewizardpptp.ui:330 profilepptpoptionsbase.ui:123
#, no-c-format
msgid "Refuse 128 bit length encryption of MPPE"
msgstr "128-bits versleuteling van MPPE weigeren"
#: newprofilewizardpptp.ui:338
#, no-c-format
msgid "Allo&w MPPE stateful mode"
msgstr "MPPE state&full-modus toestaan"
#: newprofilewizardpptp.ui:352 profilepptpoptionsbase.ui:131
#, fuzzy, no-c-format
msgid "Do not use &MPPC compression"
msgstr "Geen MPPC-compressie gebruiken"
#: newprofilewizardpptp.ui:358 profilepptpoptionsbase.ui:137
#, no-c-format
msgid ""
"Do not use the Microsoft Poit-To-Point Compression protocol. I.e. for "
"compatibility with watchguard firebox (disabled by default)"
msgstr ""
"Maak geen gebruik van het Microsoft Point-to-point Compression-protocol."
" Bijv. voor compatibiliteit met watchguard firebox (standaard "
"uitgeschakeld)"
#: newprofilewizardpptp.ui:361 profilepptpoptionsbase.ui:140
#, no-c-format
msgid ""
"Check this for disable Microsoft Point-to-Point Compression (MPPC) (i.e. for "
"compatibility with watchguard firebox)."
msgstr ""
"Selecteer dit om Microsoft Point-to-Point Compression (MPPC) uit te "
"schakelen (bijv. voor compatibiliteit met watchguard firebox)."
#: newprofilewizardpptp.ui:398 profilepptpoptionsbase.ui:414
#, fuzzy, no-c-format
msgid "Authorization method:"
msgstr "Authenticatiemethode"
#: newprofilewizardpptp.ui:413 profilepptpoptionsbase.ui:429
#, fuzzy, no-c-format
msgid "Re&quire EAP"
msgstr "MPPE &vereisen"
#: newprofilewizardpptp.ui:419 profilepptpoptionsbase.ui:435
#, no-c-format
msgid "Require EAP (disabled by default), should be disabled"
msgstr ""
#: newprofilewizardpptp.ui:447 profilepptpoptionsbase.ui:459
#, fuzzy, no-c-format
msgid "L2TP daemon"
msgstr "IPSec (racoon)"
#: newprofilewizardpptp.ui:472 profilepptpoptionsbase.ui:484
#, no-c-format
msgid "l2tpd/xl2tpd"
msgstr ""
#: newprofilewizardpsk.ui:54 profilepskoptionsbase.ui:224
#, no-c-format
msgid "Sa&ve PSK"
msgstr "PSK op&slaan"
#: newprofilewizardpsk.ui:60 profilepskoptionsbase.ui:230
#, no-c-format
msgid "Save Pre-shared key in config file (or in TDEWallet if available)"
msgstr ""
"Preshared key opslaan in configuratiebestand (of in TDEWallet, indien "
"beschikbaar)"
#: newprofilewizardpsk.ui:71 profilepskoptionsbase.ui:199
#, no-c-format
msgid "Pre shared key file:"
msgstr "Bestand met preshared key:"
#: newprofilewizardpsk.ui:122 profilepskoptionsbase.ui:129
#, no-c-format
msgid "File which contains Pre-shared key (shared secret)"
msgstr "Bestand dat de preshared key (shared secret) bevat"
#: newprofilewizardpsk.ui:178 profilepskoptionsbase.ui:165
#, no-c-format
msgid "&Load PSK from file"
msgstr "PSK uit bestand &laden"
#: newprofilewizardpsk.ui:184 profilepskoptionsbase.ui:171
#, no-c-format
msgid "Pre-shared key (shared secret) is stored in a file (e.g. on a usbstick)"
msgstr ""
"Preshared key (shared secret) is opgeslagen in een bestand (bijv. op een usb-"
"stick)"
#: newprofilewizardracoon.ui:16
#, fuzzy, no-c-format
msgid "New profile wizard racoon"
msgstr "Nieuw-profiel-assistent Cisco"
#: newprofilewizardracoon.ui:43
#, no-c-format
msgid "racoon + ipsec-tools specific settings (Linux &2.6 native or BSD)"
msgstr ""
"racoon + ipcsec-tools-specifieke instellingen (Linux &2.6 native of BSD)"
#: newprofilewizardracoon.ui:91 profileracoonoptionsbase.ui:208
#, fuzzy, no-c-format
msgid "Perfect forward secrec&y (PFS):"
msgstr "Perfect &forward secrecy (PFS):"
#: newprofilewizardracoon.ui:132 profileracoonoptionsbase.ui:389
#, fuzzy, no-c-format
msgid "Encryption algorithm phase 2:"
msgstr "Hash-algoritme:"
#: newprofilewizardracoon.ui:175 profileracoonoptionsbase.ui:162
#, fuzzy, no-c-format
msgid "Authentication algorithm phase 1:"
msgstr "Authenticatietype:"
#: newprofilewizardracoon.ui:178 newprofilewizardracoon.ui:227
#: profileracoonoptionsbase.ui:165 profileracoonoptionsbase.ui:365
#, no-c-format
msgid "Use specified hash algorithm for IKE phase 1"
msgstr "Gebruikerspecifiek hash-algoritme gebruiken voor IKE phase 1"
#: newprofilewizardracoon.ui:243 profileracoonoptionsbase.ui:249
#, fuzzy, no-c-format
msgid "Encryption algorithm phase 1:"
msgstr "Hash-algoritme:"
#: newprofilewizardracoon.ui:380 profileracoonoptionsbase.ui:424
#, fuzzy, no-c-format
msgid "Authentication algorithm phase 2:"
msgstr "Authenticatietype:"
#: newprofilewizardracoon.ui:417 profileracoonoptionsbase.ui:82
#, fuzzy, no-c-format
msgid "&Use Mode Configuration"
msgstr "&Modusconfiguratie gebruiken"
#: newprofilewizardstart.ui:27
#, no-c-format
msgid ""
"Welcome to this wizard which will help you to create a new profile.\n"
"\n"
"Click \"Next\" to continue."
msgstr ""
"Welkom bij deze assistent die u zal helpen bij het aanmaken van een nieuw "
"profiel.\n"
"\n"
"Klik op \"Volgende\" om door te gaan."
#: newprofilewizardtypeselection.ui:16
#, no-c-format
msgid "New profile wizard type selection"
msgstr "Nieuw-profiel-assistent typeselectie"
#: newprofilewizardtypeselection.ui:43
#, no-c-format
msgid "Select the type of your VPN:"
msgstr "Selecteer het type VPN dat u gebruikt:"
#: newprofilewizardtypeselection.ui:62
#, fuzzy, no-c-format
msgid "&Cisco (free)"
msgstr "Cisco(vpn)"
#: newprofilewizardtypeselection.ui:76
#, fuzzy, no-c-format
msgid "&L2TP over IPSec (Free/SWAN or Openswan)"
msgstr "&IPSec (Free/SWAN of Openswan)"
#: newprofilewizardtypeselection.ui:87
#, fuzzy, no-c-format
msgid "L2TP over IPSec (Linux 2.&6 native or BSD)"
msgstr "IPSec (Linux &2.6 native of BSD)"
#: newprofilewizardtypeselection.ui:98
#, no-c-format
msgid "&Microsoft PPTP"
msgstr "&Microsoft PPTP"
#: newprofilewizardtypeselection.ui:109
#, no-c-format
msgid "Open&VPN"
msgstr "Open&VPN"
#: newprofilewizardtypeselection.ui:120
#, no-c-format
msgid "IPSec (Linux &2.6 native or BSD)"
msgstr "IPSec (Linux &2.6 native of BSD)"
#: newprofilewizardtypeselection.ui:131
#, no-c-format
msgid "&IPSec (Free/SWAN or Openswan)"
msgstr "&IPSec (Free/SWAN of Openswan)"
#: newprofilewizardtypeselection.ui:142
#, no-c-format
msgid "Cisco (propritar&y)"
msgstr ""
#: newprofilewizardtypeselection.ui:153
#, no-c-format
msgid "&Vtun"
msgstr ""
#: newprofilewizardtypeselection.ui:164
#, no-c-format
msgid "&SSH"
msgstr ""
#: newprofilewizarduser.ui:46 profileuseroptionsbase.ui:101
#, no-c-format
msgid "NT domain name for authentication"
msgstr "NT-domeinnaam voor authenticatie"
#: newprofilewizarduser.ui:57
#, no-c-format
msgid "N&T domain name for authentication:"
msgstr "N&T-domeinnaam voor authenticatie:"
#: newprofilewizarduser.ui:63 profileuseroptionsbase.ui:71
#, no-c-format
msgid "Use NT domain for authentication"
msgstr "NT-domein voor authenticatie gebruiken"
#: newprofilewizarduser.ui:170 profileuseroptionsbase.ui:235
#, no-c-format
msgid "Save &user password"
msgstr "Gebr&uikerswachtwoord opslaan"
#: newprofilewizarduser.ui:176 profileuseroptionsbase.ui:241
#, no-c-format
msgid "Save user password in config file (or in TDEWallet if available)"
msgstr ""
"Gebruikerswachtwoord opslaan in configuratiebestand (of in TDEWallet indien "
"beschikbaar)"
#: newprofilewizarduser.ui:184
#, fuzzy, no-c-format
msgid "Dont sa&ve username"
msgstr "Gebruikersnaam niet opslaan"
#: newprofilewizarduser.ui:190 profileuseroptionsbase.ui:140
#, no-c-format
msgid "Do not save the username in config nor TDEWallet"
msgstr ""
"Bewaar de gebruikersnaam niet in het configuratiebestand of in TDEWallet"
#: profilecertoptionsbase.ui:67
#, fuzzy, no-c-format
msgid "Use e&mail address as identifier"
msgstr "Opgegeven adres &gebruiken voor ping:"
#: profilecertoptionsbase.ui:122
#, fuzzy, no-c-format
msgid "Allo&w empty private key passphrase"
msgstr "Wachtwoord voor pri&vate sleutel opslaan"
#: profilecertoptionsbase.ui:327
#, no-c-format
msgid ""
"Here you can import a certificate in P12 format. You will get it from your "
"administrator if needed."
msgstr ""
"Hier kunt u een certificaat in p12-formaat importeren. U kunt deze indien "
"nodig van uw systeembeheerder krijgen."
#: profilecertoptionsbase.ui:440
#, fuzzy, no-c-format
msgid "Verify CA certificate of peer"
msgstr "Pad naar CA-certificaat"
#: profilecertoptionsbase.ui:461
#, fuzzy, no-c-format
msgid "Use &Cisco certificate store"
msgstr "Certificaat importeren..."
#: profilecertoptionsbase.ui:634
#, no-c-format
msgid "Save private ke&y passphrase"
msgstr "Wachtwoord voor pri&vate sleutel opslaan"
#: profileciscooptionsbase.ui:51
#, no-c-format
msgid "Peer timeout:"
msgstr "Timeout peer:"
#: profileciscooptionsbase.ui:54
#, no-c-format
msgid "Peer timeout"
msgstr "Timeout peer"
#: profileciscooptionsbase.ui:82
#, no-c-format
msgid ""
"After this number of seconds KVpnc reconnects. Value of 0 disables timeout."
msgstr ""
"Na dit aantal seconden zal KVpnc opnieuw verbinding maken. 0 schakelt de "
"timeout uit."
#: profileciscooptionsbase.ui:141
#, fuzzy, no-c-format
msgid "Use &local port for ISAKMP:"
msgstr "Opgegeven &lokale poort gebruiken:"
#: profileciscooptionsbase.ui:178 profilevtunoptionsbase.ui:168
#, no-c-format
msgid "Local port number"
msgstr "Nummer van lokale poort"
#: profileciscooptionsbase.ui:199
#, fuzzy, no-c-format
msgid "Disable &data encryption"
msgstr "Opportunistische versle&uteling uitschakelen"
#: profileciscooptionsbase.ui:205
#, fuzzy, no-c-format
msgid "disables the encrytion for data"
msgstr "Opportunistische versle&uteling uitschakelen"
#: profileciscooptionsbase.ui:240
#, no-c-format
msgid "Cisco NAT mode:"
msgstr ""
#: profileciscooptionsbase.ui:268 profileciscooptionsbase.ui:277
#, no-c-format
msgid ""
"Sets the NAT traversal mode for cisco (vpnc >= 0.4.x)\n"
"\n"
"* natt - NAT-T as defined in RFC3947\n"
"* force-natt - always use NAT-T encapsulation even without presence of a NAT "
"device (useful if the OS captures all ESP traffic)\n"
"* cisco-udp - Cisco proprietary UDP encapsulation, commonly over Port 10000\n"
msgstr ""
#: profileciscooptionsbase.ui:410
#, fuzzy, no-c-format
msgid "&Use global IPSec secret"
msgstr "Globaal IPSec-geheim gebruiken"
#: profileciscooptionsbase.ui:416
#, no-c-format
msgid "Use global IPSec secret from /etc/vpnc/default.conf"
msgstr "Globaal IPSec-geheim van /etc/vpnc/default.conf gebruiken"
#: profileciscooptionsbase.ui:520
#, no-c-format
msgid "E&nable interactive extended authentication"
msgstr "Interactieve uitgebreide authenticatie activere&n"
#: profileciscooptionsbase.ui:542
#, no-c-format
msgid "Allow empt&y group password (insecure!)"
msgstr "Leeg groepswacht&woord toestaan (onveilig!)"
#: profileciscooptionsbase.ui:620
#, no-c-format
msgid "Enable DPD idle ti&meout:"
msgstr ""
#: profileciscooptionsbase.ui:626
#, no-c-format
msgid "Use DPD (Dead Peer Detection)"
msgstr ""
#: profileciscooptionsbase.ui:669
#, fuzzy, no-c-format
msgid "DPD idle timeout"
msgstr "Timeout peer"
#: profileciscooptionsbase.ui:672
#, no-c-format
msgid "This is the value of DPD (Dead Peer Detection) timeout."
msgstr ""
#: profilecmdexecafterconnectoptionsbase.ui:24
#, no-c-format
msgid "Command Execution After Connect"
msgstr "Commando uitvoeren na verbindingsopbouw"
#: profilecmdexecafterconnectoptionsbase.ui:43
#, no-c-format
msgid "E&xecute command after connect"
msgstr "Commando uitvoeren na verbindingsopbou&w"
#: profilecmdexecafterconnectoptionsbase.ui:49
#, no-c-format
msgid "Execute specified command after connect"
msgstr "Opgegeven commando uitvoeren nadat de verbinding is opgebouwd"
#: profilecmdexecafterconnectoptionsbase.ui:52
#, no-c-format
msgid "Check this to execute specified command after every successful connect."
msgstr ""
"Selecteer dit om het opgegeven commando uit te voeren na elke succesvolle "
"verbindingsopbouw."
#: profilecmdexecafterconnectoptionsbase.ui:72
#: profilecmdexecafterconnectoptionsbase.ui:75
#, no-c-format
msgid ""
"Command to execute after sucessful connect. Normal shell commands are "
"accepted."
msgstr ""
"Commando om uit te voeren na succesvolle verbindingsopbouw. Normale "
"shellcommando's worden geaccepteerd."
#: profilecmdexecafterconnectoptionsbase.ui:91
#, no-c-format
msgid "Delay time:"
msgstr ""
#: profilecmdexecafterdisconnectoptionsbase.ui:35
#, no-c-format
msgid "Execute co&mmand after disconnect"
msgstr "Com&mando uitvoeren na verbreken van verbinding"
#: profilecmdexecafterdisconnectoptionsbase.ui:41
#, no-c-format
msgid "Execute specified command after disconnect"
msgstr "Opgegeven commando uitvoeren na verbreken van verbinding"
#: profilecmdexecafterdisconnectoptionsbase.ui:44
#, no-c-format
msgid "Check this to execute specified command after every disconnect."
msgstr ""
"Selecteer dit om het opgegeven commando uit te voeren na elke verbreking van "
"de verbinding."
#: profilecmdexecafterdisconnectoptionsbase.ui:64
#: profilecmdexecafterdisconnectoptionsbase.ui:67
#, no-c-format
msgid ""
"Command to execute after successful disconnect. Normal shell commands "
"are accepted."
msgstr ""
"Commando om uit te voeren uitvoeren na succesvol verbreken van de "
"verbinding. Normale shellcommando's worden geaccepteerd"
#: profilecmdexecbeforeconnectoptionsbase.ui:24
#, no-c-format
msgid "Command Execution Before Connect"
msgstr "Commando uitvoeren voor de verbindingsopbouw"
#: profilecmdexecbeforeconnectoptionsbase.ui:35
#, no-c-format
msgid "Execu&te command before connect"
msgstr "Commando ui&tvoeren vóór de verbindingsopbouw"
#: profilecmdexecbeforeconnectoptionsbase.ui:41
#, no-c-format
msgid "Execute specified commands before connect"
msgstr "Opgegeven commando uitvoeren voor de verbindingsopbouw"
#: profilecmdexecbeforeconnectoptionsbase.ui:44
#, no-c-format
msgid ""
"Check this to execute specified command before every successful connect."
msgstr ""
"Selecteer dit om het opgegeven commando uit te voeren voor elke succesvolle "
"verbinding."
#: profilecmdexecbeforeconnectoptionsbase.ui:64
#, no-c-format
msgid "Command to execute before connect"
msgstr "Commando om uit te voeren voor verbindingsopbouw"
#: profilecmdexecbeforeconnectoptionsbase.ui:67
#, no-c-format
msgid ""
"Command to execute before connect. Normal shell commands are accepted."
msgstr ""
"Commando uitvoeren de verbindingsopbouw. Normale shellcommando's worden "
"geaccepteerd."
#: profilecmdexecbeforedisconnectoptionsbase.ui:24
#, no-c-format
msgid "Command Execution Before Disconnect"
msgstr "Commando uitvoeren voor verbreken van verbinding"
#: profilecmdexecbeforedisconnectoptionsbase.ui:35
#, no-c-format
msgid "Execute comm&and before disconnect"
msgstr "Comm&ando uitvoeren voor verbreken van verbinding"
#: profilecmdexecbeforedisconnectoptionsbase.ui:41
#, no-c-format
msgid "Execute specified command before disconnect"
msgstr "Opgegeven commando uitvoeren voor verbreken van verbinding"
#: profilecmdexecbeforedisconnectoptionsbase.ui:44
#, no-c-format
msgid "Check this to execute specified command before every disconnect."
msgstr ""
"Selecteer dit om het opgegeven commando uit te voeren voor elke verbreking "
"van de verbinding."
#: profilecmdexecbeforedisconnectoptionsbase.ui:64
#: profilecmdexecbeforedisconnectoptionsbase.ui:67
#, no-c-format
msgid ""
"Command to execute before disconnect. Normal shell commands are accepted."
msgstr ""
"Commando uitvoeren voor verbreken van verbinding. Normale "
"shellcommando's worden geaccepteerd."
#: profilegeneraloptionsbase.ui:75
#, no-c-format
msgid "Profile description"
msgstr "Profielbeschrijving"
#: profilegeneraloptionsbase.ui:83
#, no-c-format
msgid "Connection type"
msgstr "Verbindingstype"
#: profilegeneraloptionsbase.ui:138
#, no-c-format
msgid "Rena&me"
msgstr "Hernoe&men"
#: profilegeneraloptionsbase.ui:144
#, no-c-format
msgid "Rename the current profile"
msgstr "Het huidige profiel hernoemen"
#: profilegeneraloptionsbase.ui:152
#, no-c-format
msgid "Sa&ve"
msgstr "Op&slaan"
#: profilegeneraloptionsbase.ui:158
#, no-c-format
msgid "Save the current profile"
msgstr "Het huidige profiel opslaan"
#: profilegeneraloptionsbase.ui:166
#, no-c-format
msgid "Dele&te"
msgstr "Verwij&deren"
#: profilegeneraloptionsbase.ui:172
#, no-c-format
msgid "Delete the current profile"
msgstr "Het huidige profiel verwijderen"
#: profilegeneraloptionsbase.ui:180
#, no-c-format
msgid "Ne&w"
msgstr "Nieu&w"
#: profilegeneraloptionsbase.ui:186
#, no-c-format
msgid "Create a new profile"
msgstr "Een nieuw profiel aanmaken"
#: profileipsecoptionsbase.ui:16
#, fuzzy, no-c-format
msgid "FreeSWAN (OpenSWAN)"
msgstr "Racoon/FreeSWAN (OpenSWAN)"
#: profileipsecoptionsbase.ui:177
#, fuzzy, no-c-format
msgid "Use PFS"
msgstr "PFS &uitschakelen"
#: profileipsecoptionsbase.ui:423
#, fuzzy, no-c-format
msgid "IKE/ESP"
msgstr "KDE"
#: profileipsecoptionsbase.ui:466
#, no-c-format
msgid "Specify IKE"
msgstr ""
#: profileipsecoptionsbase.ui:494 profileipsecoptionsbase.ui:653
#, no-c-format
msgid "Help needed?"
msgstr ""
#: profileipsecoptionsbase.ui:518
#, no-c-format
msgid "aes&256-sha1"
msgstr ""
#: profileipsecoptionsbase.ui:540
#, no-c-format
msgid "3des-sha1-modp2&048"
msgstr ""
#: profileipsecoptionsbase.ui:543 profilepptpoptionsbase.ui:106
#, fuzzy, no-c-format
msgid "Alt+0"
msgstr "Alt+I"
#: profileipsecoptionsbase.ui:616
#, no-c-format
msgid "Specify ESP"
msgstr ""
#: profileipsecoptionsbase.ui:795 profileracoonoptionsbase.ui:476
#, fuzzy, no-c-format
msgid "Local/Remote ID"
msgstr "Speciaal remote-id"
#: profileipsecoptionsbase.ui:866
#, no-c-format
msgid ""
"Value for the local ID, hint: if type address, you can enter a hostname here "
"which will be resolved at connect"
msgstr ""
#: profileipsecoptionsbase.ui:1000
#, no-c-format
msgid ""
"Value for the remote ID, hint: if type address, you can enter a hostname "
"here which will be resolved at connect"
msgstr ""
#: profilenetworkgeneraloptionsbase.ui:16
#, fuzzy, no-c-format
msgid "General network options"
msgstr "Algemene instellingen"
#: profilenetworkgeneraloptionsbase.ui:43
#, fuzzy, no-c-format
msgid "User defined &MTU:"
msgstr "Gebruikergedefinieerde &MTU:"
#: profilenetworkgeneraloptionsbase.ui:106
#, fuzzy, no-c-format
msgid "Check this to set a custom MRU size"
msgstr "Selecteer dit om zelf de MTU-grootte op te geven"
#: profilenetworkgeneraloptionsbase.ui:109
#, fuzzy, no-c-format
msgid "If you enable this you can set a own MRU size."
msgstr "Als u dit inschakelt, dan kunt u uw eigen MTU-grootte opgeven."
#: profilenetworkgeneraloptionsbase.ui:129
#, fuzzy, no-c-format
msgid "The MRU size for the ppp connection"
msgstr "De MTU-grootte voor de ppp-verbinding"
#: profilenetworkgeneraloptionsbase.ui:132
#, fuzzy, no-c-format
msgid "Here you can specify the MRU size for use with pppd."
msgstr "Hier kunt u de MTU-grootte om te gebruiken met pppd opgeven."
#: profilenetworkgeneraloptionsbase.ui:238
#, no-c-format
msgid ""
"This is the network device which should be used for the tunnel. Its only "
"active if needed. If no selection made, \"default\" is set for using the "
"device where the defaultroute points to."
msgstr ""
"Dit is het netwerkapparaat dat gebruikt zal worden voor de tunnel. Het is "
"alleen actief als dat nodig is. Indien er geen selectie gemaakt is zal "
"\"standaard\" worden gebruikt om het apparaat te gebruiken waar de "
"standaardroute naar verwijst."
#: profilenetworkgeneraloptionsbase.ui:267
#, no-c-format
msgid "Fix path mtu discovery problem"
msgstr ""
#: profilenetworkgeneraloptionsbase.ui:273
#, no-c-format
msgid ""
"Fixes the path mtu discovery problem by inserting a special firwall rule."
msgstr ""
#: profilenetworkgeneraloptionsbase.ui:276
#, no-c-format
msgid ""
"Problem: TCP connections using the PPTP Client host as a hop in the route "
"(such as via normal routing, NAT or IP masquerading) freeze once they "
"attempt to transfer large amounts of data.\n"
"Diagnosis: path MTU discovery may not be working, due to hosts on the route "
"refusing to forward ICMP fragmentation needed responses."
msgstr ""
#: profilenetworkgeneraloptionsbase.ui:296
#, fuzzy, no-c-format
msgid "Update DNS configuration"
msgstr "&Modusconfiguratie gebruiken"
#: profilenetworkgeneraloptionsbase.ui:305
#, no-c-format
msgid "Modify the nameserver configuration and set DNS_UPDATE var."
msgstr ""
#: profilenetworkgeneraloptionsbase.ui:308
#, no-c-format
msgid ""
"If this is checked, the nameserver configuration will be updated. The "
"DNS_UPDATE environment variable will be set to YES, otherwise NO."
msgstr ""
#: profilenetworkgeneraloptionsbase.ui:590
#, no-c-format
msgid "Connection Status Check"
msgstr "Controle op verbindingsstatus"
#: profilenetworkgeneraloptionsbase.ui:593
#, no-c-format
msgid "Options for connection status check"
msgstr "Opties voor controle op verbindingsstatus"
#: profilenetworkgeneraloptionsbase.ui:596
#, no-c-format
msgid "Here you can set various options for the connection status check."
msgstr ""
"Hier kunt u diverse opties instellen voor het controleren van de "
"verbindingsstatus."
#: profilenetworkgeneraloptionsbase.ui:618
#, fuzzy, no-c-format
msgid "&Check connection status"
msgstr "Verbindingsstat&uscontrole gebruiken"
#: profilenetworkgeneraloptionsbase.ui:630
#, no-c-format
msgid ""
"If checked, the connection status check will be enabled. The parameters "
"below control how often the gateway will be pinged and it must be minimal "
"success in a count. Example: interval 1, success count 4: this means that "
"4 pings will be done and minimal one must be success for keep the connection "
"alive. The delay between the pings are 1 sec."
msgstr ""
"Indien geselecteerd zal de verbindingsstatus worden gecontroleerd. De "
"parameters hieronder bepalen hoe vaak er een ping naar de gateway zal worden "
"verzonden en hoe vaak deze succesvol moet zijn. Voorbeeld: interval1, "
"succestelling 4 betekent dat vier pings zullen worden uitgevoerd en dat "
"tenminste een succesvol moet zijn om de verbinding actief te houden. De "
"vertraging tussen de pings is 1 seconde."
#: profilenetworkgeneraloptionsbase.ui:812
#, fuzzy, no-c-format
msgid "Ping hostname/IP address:"
msgstr "Geen IP-adres"
#: profilenetworkgeneraloptionsbase.ui:818
#, fuzzy, no-c-format
msgid ""
"Use specified hostname/IP address instead the gateway address to test the "
"connection status"
msgstr ""
"Opgegeven adres gebruiken in plaats van het gateway-adres om de status van "
"de verbinding te testen"
#: profilenetworkgeneraloptionsbase.ui:832
#, fuzzy, no-c-format
msgid "Hostname/IP address for ping test"
msgstr "IP-adres voor ping-test"
#: profilenetworkgeneraloptionsbase.ui:835
#, fuzzy, no-c-format
msgid "This is the hostname/IP address which should be tested."
msgstr "Dit is het IP-adres dat u wilt testen."
#: profilenetworkgeneraloptionsbase.ui:881
#, fuzzy, no-c-format
msgid "Reconnect dela&y:"
msgstr "Vertraging voor opnieuw verbinden in seconden"
#: profilenetworkgeneraloptionsbase.ui:890
#, no-c-format
msgid "Delay in seconds before reconnect after the connection lost"
msgstr ""
"Vertraging in seconden voordat de verbinding na het verbreken ervan opnieuw "
"wordt opgebouwd."
#: profilenetworkgeneraloptionsbase.ui:932
#, no-c-format
msgid "Reconnect delay in seconds"
msgstr "Vertraging voor opnieuw verbinden in seconden"
#: profilenetworkhttpproxyoptionsbase.ui:43
#, fuzzy, no-c-format
msgid "Use HTTP prox&y"
msgstr "&HTTP-proxy gebruiken"
#: profilenetworkhttpproxyoptionsbase.ui:68
#, no-c-format
msgid "HTTP proxy settings"
msgstr "Instellingen voor HTTP-proxy"
#: profilenetworkhttpproxyoptionsbase.ui:334
#, fuzzy, no-c-format
msgid "Use HTTP prox&y authentication"
msgstr "HTTP-proxy-&authenticatie gebruiken"
#: profilenetworknatoptionsbase.ui:59
#, fuzzy, no-c-format
msgid "&Use UDP"
msgstr "PFS &uitschakelen"
#: profilenetworknatoptionsbase.ui:65
#, fuzzy, no-c-format
msgid ""
"For IPSec use UDP encapsulation. For openvpn use UDP instead of TCP "
"protocol."
msgstr ""
"Voor IPSec, gebruik UDP-encapsulation (NAT-T). Voor openvpn, gebruik UDP "
"in plaats van TCP."
#: profilenetworknatoptionsbase.ui:129
#, fuzzy, no-c-format
msgid "UDP port for NAT-&T:"
msgstr "&UDP-poort voor NAT-T:"
#: profilenetworkrouteoptionsbase.ui:24
#, no-c-format
msgid "Network Route Options"
msgstr "Opties netwerkroute"
#: profilenetworkrouteoptionsbase.ui:188
#, fuzzy, no-c-format
msgid "Edit &route..."
msgstr "&Route toevoegen..."
#: profilenetworkvirtualipoptionsbase.ui:16
#, no-c-format
msgid "Network Virtual IP Options"
msgstr "Opties virtueel IP-netwerk"
#: profilenetworkvirtualipoptionsbase.ui:78
#, no-c-format
msgid "Remote IP address (for tunnel)"
msgstr "Remote IP (voor tunnel)"
#: profilenetworkvirtualipoptionsbase.ui:86
#, no-c-format
msgid "Use vir&tual IP addresses"
msgstr "Vir&tueel IP-adres gebruiken"
#: profilenetworkvirtualipoptionsbase.ui:92
#, no-c-format
msgid "Use virtual IP addresses"
msgstr "Virtueel IP-adres gebruiken"
#: profilenetworkvirtualipoptionsbase.ui:103
#, no-c-format
msgid "Local IP address (for tunnel)"
msgstr "Lokaal IP-adres (voor tunnel)"
#: profilenetworkvirtualipoptionsbase.ui:117
#, no-c-format
msgid "Local IP (virtual):"
msgstr "Lokaal IP (virtueel):"
#: profilenetworkvirtualipoptionsbase.ui:129
#, fuzzy, no-c-format
msgid "IPsec"
msgstr "IPSec-id:"
#: profilenetworkvirtualipoptionsbase.ui:164
#, fuzzy, no-c-format
msgid "Use &local source IP:"
msgstr "Opgegeven &lokale poort gebruiken:"
#: profilenetworkvirtualipoptionsbase.ui:175
#, fuzzy, no-c-format
msgid "&Use remote source IP:"
msgstr "Netwerk op afstand"
#: profilenetworkvirtualipoptionsbase.ui:207
#, fuzzy, no-c-format
msgid "&Use virtual subnets:"
msgstr "Virtueel IP-adres gebruiken"
#: profilenetworkvirtualipoptionsbase.ui:227
#, no-c-format
msgid ""
"for example: %v4:10.0.0.0/8,%v4:172.16.0.0/12,%v4:192.168.0.0/16,%v4:!"
"192.168.2.0/24,%v4:!192.168.15.128/25"
msgstr ""
#: profileopenvpnoptionsbase.ui:78
#, no-c-format
msgid "Use specified &local port:"
msgstr "Opgegeven &lokale poort gebruiken:"
#: profileopenvpnoptionsbase.ui:84 profileopenvpnoptionsbase.ui:235
#, no-c-format
msgid "Specify local (source) port to use"
msgstr "Geef de lokale (bron) poort om te gebruiken op"
#: profileopenvpnoptionsbase.ui:92 profilesshoptionsbase.ui:43
#, no-c-format
msgid "&Use specified remote port:"
msgstr "Opgegeven remote poort gebr&uiken:"
#: profileopenvpnoptionsbase.ui:134
#, no-c-format
msgid "Disable socket bind"
msgstr ""
#: profileopenvpnoptionsbase.ui:229
#, no-c-format
msgid "Use tunnel ping restart:"
msgstr ""
#: profileopenvpnoptionsbase.ui:243
#, fuzzy, no-c-format
msgid "Use reneg-sec:"
msgstr "Gebruikersnaam:"
#: profileopenvpnoptionsbase.ui:288
#, no-c-format
msgid "Frag&ment packets bigger than:"
msgstr "Pakketten frag&menteren wanneer groter dan:"
#: profileopenvpnoptionsbase.ui:314
#, no-c-format
msgid "Packet size"
msgstr "Pakketgrootte"
#: profileopenvpnoptionsbase.ui:317
#, no-c-format
msgid "This is the max packet size after encapsulation"
msgstr "Dit is de maximale grootte van pakketten na het inkapselen"
#: profileopenvpnoptionsbase.ui:371
#, no-c-format
msgid "Max packet size"
msgstr "Maximale pakketgrootte"
#: profileopenvpnoptionsbase.ui:379
#, no-c-format
msgid "Use tunnel ping:"
msgstr ""
#: profileopenvpnoptionsbase.ui:410
#, no-c-format
msgid "Use specified packet size:"
msgstr "Opgegeven pakketgrootte gebruiken:"
#: profileopenvpnoptionsbase.ui:413
#, no-c-format
msgid "Use specified max packet size after encapsulation"
msgstr "Gebruik de opgegeven maximale pakketgrootte na inkapseling"
#: profileopenvpnoptionsbase.ui:584 profileopenvpnoptionsbase.ui:640
#, fuzzy, no-c-format
msgid "Digest algorithm"
msgstr "Versleutelingsalgoritme"
#: profileopenvpnoptionsbase.ui:609
#, no-c-format
msgid "Use only CA cert and authenticate with username and password"
msgstr ""
"Alleen CA-certificaat gebruiken en authenticeren met gebruikersnaam en "
"wachtwoord"
#: profileopenvpnoptionsbase.ui:659
#, fuzzy, no-c-format
msgid "Authentication direction:"
msgstr "Authenticatieselectie"
#: profileopenvpnoptionsbase.ui:670
#, no-c-format
msgid "The NS cert type:"
msgstr "Type NS-certificaat:"
#: profileopenvpnoptionsbase.ui:719
#, no-c-format
msgid "Use &TLS auth"
msgstr "&TLS-authenticatie gebruiken"
#: profileopenvpnoptionsbase.ui:753
#, no-c-format
msgid "File name of static key or passphrase file."
msgstr "Bestandsnaam van statische sleutel of wachtwoordbestand."
#: profilepptpoptionsbase.ui:31
#, no-c-format
msgid "MPPE"
msgstr ""
#: profilepptpoptionsbase.ui:89
#, no-c-format
msgid "A&llow MPPE stateful mode"
msgstr "MPPE statefu&l-modus toestaan"
#: profilepptpoptionsbase.ui:103
#, no-c-format
msgid "Refuse 4&0 bit encryption"
msgstr "4&0-bits versleuteling weigeren"
#: profilepptpoptionsbase.ui:117
#, no-c-format
msgid "Refuse &128 bit encryption"
msgstr "&128-bit versleuteling weigeren"
#: profilepptpoptionsbase.ui:171
#, fuzzy, no-c-format
msgid "PPP"
msgstr "PPTP"
#: profilepptpoptionsbase.ui:526
#, no-c-format
msgid "DNS"
msgstr ""
#: profilepskoptionsbase.ui:95
#, no-c-format
msgid "Pre Shared Key (Cisco: Group Password)"
msgstr "Preshared key (Cisco: groepswachtwoord)"
#: profilepskoptionsbase.ui:98
#, no-c-format
msgid "PSK options"
msgstr "PSK-opties"
#: profilepskoptionsbase.ui:140
#, no-c-format
msgid "Pre shared key:"
msgstr "Preshared key:"
#: profileracoonoptionsbase.ui:35
#, fuzzy, no-c-format
msgid "racoon + ipsec tools specific settings (Linux &2.6 native or BSD"
msgstr ""
"racoon + ipcsec-tools-specifieke instellingen (Linux &2.6 native of BSD)"
#: profilesshoptionsbase.ui:104
#, no-c-format
msgid "&Use network config script on server:"
msgstr ""
#: profilesshoptionsbase.ui:121
#, no-c-format
msgid "full path to script on server"
msgstr ""
#: profilesshoptionsbase.ui:124
#, no-c-format
msgid ""
"Parameter 0: script name e.g. /root/ssh_vpn_up.sh\n"
"Parameter 1: device type e.g. tun\n"
"Parameter 2: ip address e.g. 1.2.3.4 (tun)\n"
"Parameter 3: remote ip address 1.2.3.5 (tun)"
msgstr ""
#: profilesshoptionsbase.ui:156
#, no-c-format
msgid "&Key"
msgstr ""
#: profilesshoptionsbase.ui:167
#, fuzzy, no-c-format
msgid "Pass&word"
msgstr "Wachtwoord"
#: profilesshoptionsbase.ui:205
#, no-c-format
msgid "SSH key"
msgstr ""
#: profilesshoptionsbase.ui:235
#, no-c-format
msgid "Costum key:"
msgstr ""
#: profilesshoptionsbase.ui:275
#, fuzzy, no-c-format
msgid "autodetected ke&y:"
msgstr "NAT-instellingen: gebruik opgegeven poort: %1"
#: profileuseroptionsbase.ui:65
#, fuzzy, no-c-format
msgid "N&T domain name:"
msgstr "(NT-)domeinnaam \"%1\" wordt gebruikt."
#: profileuseroptionsbase.ui:134
#, no-c-format
msgid "Dont save username"
msgstr "Gebruikersnaam niet opslaan"
#: profileuseroptionsbase.ui:251
#, no-c-format
msgid "Hide group pass&word field in account data dialog"
msgstr ""
#: profileuseroptionsbase.ui:257
#, no-c-format
msgid ""
"Do not show group password field in dialog for request username/password."
msgstr ""
#: profileuseroptionsbase.ui:268
#, fuzzy, no-c-format
msgid "Ask user password on each connect"
msgstr "Wachtwoord voor authenticatie"
#: profileuseroptionsbase.ui:274
#, no-c-format
msgid ""
"If this option is enabled, on each connect the user password will be asked."
msgstr ""
#: profilevtunoptionsbase.ui:88
#, fuzzy, no-c-format
msgid "VTun profile:"
msgstr "Profiel:"
#: profilevtunoptionsbase.ui:131
#, fuzzy, no-c-format
msgid "Use userdefined port:"
msgstr "Gespecificeerde poort gebruiken:"
#: toolsinfowidgetbase.ui:16
#, no-c-format
msgid "Tools Information"
msgstr "Informatie over hulpmiddelen"
#: toolsinfowidgetbase.ui:27
#, no-c-format
msgid "The following information about the tools has been collected:"
msgstr "De volgende informatie over de hulpmiddelen is verzameld:"
#: toolsinfowidgetbase.ui:33
#, no-c-format
msgid "Tool"
msgstr "Hulpmiddel"
#: toolsinfowidgetbase.ui:55
#, no-c-format
msgid "Version"
msgstr "Versie"
#: toolsinfowidgetbase.ui:66
#, no-c-format
msgid "Usability"
msgstr "Bruikbaarheid"
#: toolsinfowidgetbase.ui:77
#, no-c-format
msgid "required by"
msgstr ""
#: toolsinfowidgetbase.ui:88
#, no-c-format
msgid "Path"
msgstr "Pad"
#, fuzzy
#~ msgid "File"
#~ msgstr "Geen bestand"
#, fuzzy
#~ msgid "Import"
#~ msgstr "Importtype:"
#, fuzzy
#~ msgid "&Cancel"
#~ msgstr "annuleren"
#, fuzzy
#~ msgid "Cancel"
#~ msgstr "annuleren"
#, fuzzy
#~ msgid "&File"
#~ msgstr "Geen bestand"
#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Topics \n"
#~ "1. Usage \n"
#~ "1.1 Connect \n"
#~ "1.2 Disconnect \n"
#~ "2. Getting external help"
#~ "p>\n"
#~ " 2.1 Homepage \n"
#~ "2.2 Submitting bugs \n"
#~ "2.3 Author \n"
#~ "1. Usage \n"
#~ "1.1 Connect \n"
#~ "Start kvpnc and if vpnc-connect/vpnc-disconnect is not installed in /"
#~ "usr/sbin change it in settings. Click on \"New profile...\" to add a new "
#~ "profile. Enter the new Name in the upcoming dialog, fill in the empty "
#~ "fields and save profile by clicking on \"Save profile...\". After enter "
#~ "your VPN data, click on \"connect\" to connect to your VPN server. By "
#~ "default, kvpnc minimizes into kicker dock after sucessfull connect. back to top \n"
#~ "1.2 Disconnect \n"
#~ "To disconnect, click on kicker dock and kvpnc main window will be "
#~ "restored. Then click on \"disconnect\". You can also use toolbar icons or "
#~ "menu entries in kicker dock context menu. back to top"
#~ "a> \n"
#~ "2. Getting external help \n"
#~ "2.1 Homepage \n"
#~ "Go to http://home.gna.org/kvpnc/"
#~ " for new releases, contacts, etc. back to top "
#~ " \n"
#~ "2.2 Submitting bugs \n"
#~ "Go to https://gna.org/"
#~ "bugs/?group=kvpnc for submitting new bugs or look for open bugs. back to top \n"
#~ "2.3 Author \n"
#~ "Send a mail to Christoph Thielecke (u15119@hs-harz.de) if you have questions, suggestions or wishes. "
#~ "back to top \n"
#~ ""
#~ msgstr ""
#~ "\n"
#~ "Onderwerpen \n"
#~ "1. Gebruik \n"
#~ "1.1 Verbinden \n"
#~ "1.2 Verbinding verbreken \n"
#~ "2. Externe hulp vragen \n"
#~ "2.1 Website \n"
#~ "2.2 Bugs indienen \n"
#~ "2.3 Auteur \n"
#~ "1. Gebruik \n"
#~ "1.1 Verbinden \n"
#~ " Start kvpnc en pas de instellingen aan als vpnc-connect/vpnc-"
#~ "disconnect niet zijn geïnstalleerd in /usr/sbin. Klik op "Nieuw "
#~ "profiel... " om een nieuw profiel toe te voegen. Voer de nieuwe naam "
#~ "op in de geopende dialoog en vul de lege velden in. Klik op "Profiel "
#~ "opslaan..." om uw wijzigingen te bewaren. Nadat u uw VPN-gegevens "
#~ "hebt ingevuld klikt u op "verbinden" om verbinding te maken met "
#~ "uw VPN-server. Standaard wordt kpvnc geminimaliseerd naar het systeemvak "
#~ "als de verbinding is opgebouwd. terug naar boven "
#~ "p>\n"
#~ " 1.2 Verbinding verbreken \n"
#~ "Om de verbinding te verbreken klikt u op het systeemvakpictogram. het "
#~ "hoofdvenster van kpvnc wordt dan geopend. Klik daarna op ""
#~ "Verbinding verbreken ". U kunt ook de werkbalkpictogrammen gebruiken "
#~ "of de menuoptie in het contextmenu van het systeemvakpictogram. terug naar boven \n"
#~ "2. Externe hulp vragen \n"
#~ "2.1 Website \n"
#~ "Ga naar http://home.gna.org/"
#~ "kvpnc/ voor nieuwe uitgaven, contact, etc. terug "
#~ "naar boven \n"
#~ "2.2 Bugs indienen \n"
#~ "Ga naar https://gna.org/"
#~ "bugs/?group=kvpnc voor het indienen van bugs of het inzien van "
#~ "bestaande bugs.terug naar boven \n"
#~ "2.3 Auteur \n"
#~ "Stuur een e-mail naar Christoph Thielecke (u15119@hs-harz.de) als u vragen, suggesties of wensen hebt. terug naar boven \n"
#~ ""
#, fuzzy
#~ msgid "&Support KVpnc..."
#~ msgstr "KVpnc instellen..."
#~ msgid "No vpnc pid file found, using \"killall\" for killing vpnc."
#~ msgstr ""
#~ "Geen Vpnc pid bestand gevonden, zal \"killall\" gebruiken om Vpnc af te "
#~ "sluiten."
#~ msgid "Special ID for remote side (rarely needed)"
#~ msgstr "Speciaal id voor remote verbinding (zelden noodzakelijk)"
#~ msgid "Use special &remote ID:"
#~ msgstr "Speciaal &remote-id gebruiken:"
#~ msgid "Use special ID for the remote side"
#~ msgstr "Gebruik speciaal id voor de remote zijde"
#~ msgid "Us&e special server certificate"
#~ msgstr "Speciaal servercertificaat gebruik&en"
#, fuzzy
#~ msgid "Use special &remote ID"
#~ msgstr "Speciaal &remote-id gebruiken:"
#~ msgid "OpenVPN export"
#~ msgstr "OpenVPN-export"
#~ msgid "Special remote ID"
#~ msgstr "Speciaal remote-id"
#~ msgid "Special remote ID can't be empty!"
#~ msgstr "Speciaal remote-id mag niet leeg zijn."
#, fuzzy
#~ msgid "Connection finished"
#~ msgstr "Verbinding \"%1\" tot stand gebracht"
#, fuzzy
#~ msgid "Connect try canceled"
#~ msgstr "Verbindingspoging verzocht"
#, fuzzy
#~ msgid "Low level connection established."
#~ msgstr "Verbinding tot stand gebracht"
#, fuzzy
#~ msgid "*S/WAN"
#~ msgstr "FreeS/WAN"
#~ msgid "type: %1\n"
#~ msgstr "type: %1\n"
#~ msgid "IPSec ID: %1\n"
#~ msgstr "IPsec-id: %1\n"
#~ msgid "tunnel IP: %1\n"
#~ msgstr "tunnel-IP: %1\n"
#~ msgid "HTTP proxy: %1:%2\n"
#~ msgstr "HTTP-proxy: %1:%2\n"
#, fuzzy
#~ msgid "Tunnel device type: %1\n"
#~ msgstr "Type tunnelapparaat:"
#, fuzzy
#~ msgid "import fritzbox config: name found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: always_renew found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: dont_filter_netbios found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: localip found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: virtualip found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: remoteip found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: remotehostname found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: user_fqdn (local id) found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: exchange mode found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: keytype found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: key found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: cert_do_server_auth found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: use_nat_t found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: use_xauth found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: use_cfgmode found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: ip addr for phase 2 found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: remote network ip found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: remote network netmask found: %1"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: datapipecfg found"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: policies found"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: localid found"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: phase2localid found"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#, fuzzy
#~ msgid "import fritzbox config: phase2remoteid found"
#~ msgstr "OpenVPN-configuratiebestand importeren"
#~ msgid "Enable debu&g"
#~ msgstr "Debu&g activeren"
#~ msgid "Use UDP (NAT-&T)"
#~ msgstr "UDP (NAT-&T) gebruiken"
#~ msgid "Use UDP (NAT-T)"
#~ msgstr "UDP (NAT-T) gebruiken"
#, fuzzy
#~ msgid "Daemons (%1) available"
#~ msgstr "De vereiste daemons (%2 en %2) zijn beschikbaar."
#~ msgid "Tunnel IP: %1\n"
#~ msgstr "Tunnel-IP: %1\n"
#~ msgid ""
#~ "Local network type is %1 but remote network type is %2. This must be "
#~ "fixed.\n"
#~ "Go to OpenVPN settings and change it to %2."
#~ msgstr ""
#~ "Let type lokaal netwerk is %1, maar het externe netwerk is %2. Dit dient "
#~ "te worden opgelost.\n"
#~ "Ga naar de OpenVPN-instellingen en verander dit in %2."
#~ msgid ""
#~ "Local network type is %1 but remote network type is %2. This must be "
#~ "fixed."
#~ msgstr ""
#~ "Het type lokaal netwerk is %1, maar het externe netwerk is %2. Dit dient "
#~ "te worden opgelost."
#~ msgid "PCF import: group password found: %1"
#~ msgstr "PCF-import: groepswachtwoord gevonden: %1"
#~ msgid "PCF import: user password found: %1"
#~ msgstr "PCF-import: gebruikerswachtwoord gevonden: %1"
#~ msgid "PPTP specific settings"
#~ msgstr "PPTP-specifieke instellingen"
#~ msgid "Get DNS server &from peer"
#~ msgstr "DNS-server ophalen bij &peer"
#, fuzzy
#~ msgid "donate"
#~ msgstr "&Doneren"
#~ msgid "&Donate..."
#~ msgstr "&Doneren"
#~ msgid "pppd replace route process"
#~ msgstr "pppd replace route-proces"
#, fuzzy
#~ msgid "pppd replace route script"
#~ msgstr "pppd replace route-proces"
#~ msgid "New type: %1."
#~ msgstr "Nieuw type: %1"
#, fuzzy
#~ msgid "Using tunnel type: %1"
#~ msgstr "Type tunnelapparaat:"
#, fuzzy
#~ msgid "Tunnel type: %1\n"
#~ msgstr "Tunnel-IP: %1\n"
#, fuzzy
#~ msgid "&Password"
#~ msgstr "Wachtwoord"
#~ msgid "Hash algorithm:"
#~ msgstr "Hash-algoritme:"
#~ msgid "Loading module \"%1\" has failed: stop."
#~ msgstr "Laden van module \"%1\" is mislukt: gestopt."
#~ msgid "CA certificate path:"
#~ msgstr "Pad naar CA-certificaat:"
#~ msgid "Profile \"%1\" renamed to \"%2\"."
#~ msgstr "Profiel \"%1\" is hernoemd naar \"%2\"."
#, fuzzy
#~ msgid "or"
#~ msgstr "Poort"
#~ msgid "IPsec seems to be already running"
#~ msgstr "IPSec lijkt al te draaien"
#~ msgid "Trying to kill %1 and restart it."
#~ msgstr "Probeert %1 af te sluiten en opnieuw te starten."
#~ msgid "TLS remote host can't be empty!"
#~ msgstr "TLS remote host mag niet leeg zijn."
#~ msgid "Empty TLS remote host"
#~ msgstr "Lege TLS remote host"
#~ msgid "starting of \"%1\" was successful."
#~ msgstr "\"%1\" succesvol uitgevoerd."
#, fuzzy
#~ msgid "Enable xl2tpd debug"
#~ msgstr "pppd-de&buggen activeren"
#, fuzzy
#~ msgid "aggressive"
#~ msgstr "geen agressieve modus"
#, fuzzy
#~ msgid "main"
#~ msgstr "Beschrijving: %1"
#~ msgid "Exchange Mode: %1"
#~ msgstr "Uitwisselmodus: %1"
#~ msgid "Starting connection \"%1\"..."
#~ msgstr "Start verbinding \"%1\"..."
#~ msgid "Disable PFS: %1"
#~ msgstr "PFS uitschakelen: %1"
#, fuzzy
#~ msgid "Group ID: %1"
#~ msgstr "Ontving dns1:%1"
#~ msgid "Really delete \"%1\"?"
#~ msgstr "Wil u \"%1\" verwijderen?"
#~ msgid "Could not bind to listen socket (still %1 running?)"
#~ msgstr ""
#~ "Kan geen verbinding maken met de luisterpoort (draait %1 nog steeds?)"
# trema
#~ msgid "File %1 sucessfully removed"
#~ msgstr "Bestand %1 is succesvol verwijderd"
#, fuzzy
#~ msgid "Test nomppe-stateful support of pppd"
#~ msgstr "MPPE-ondersteuning van pppd (%1) testen"
#, fuzzy
#~ msgid "Test stateless support of pppd"
#~ msgstr "MPPE-ondersteuning van pppd (%1) testen"
#, fuzzy
#~ msgid "Test support of require-mppe-128 pppd"
#~ msgstr "MPPE-ondersteuning van pppd (%1) testen"
#, fuzzy
#~ msgid "Test support of require MPPE 128 pppd: %1"
#~ msgstr "MPPE-ondersteuning van pppd (%1) testen"
#~ msgid "Use &global IPSec secret"
#~ msgstr "&Globaal IPSec-geheim gebruiken"
#~ msgid "new style"
#~ msgstr "nieuwe stijl"
#~ msgid "old style"
#~ msgstr "oude stijl"
#~ msgid " %1 has MPPE support and uses old style."
#~ msgstr "%1 heeft ondersteuning voor MPPE en gebruikt de oude stijl."
#, fuzzy
#~ msgid "Type of the local ID"
#~ msgstr "Het type tunnelapparaat"
#, fuzzy
#~ msgid "This is the type of the local ID"
#~ msgstr "Dit is het pad naar vpnc"
#~ msgid "Dont using UDP."
#~ msgstr "UDP wordt niet gebruikt."
#~ msgid "Use speci&fied address to ping:"
#~ msgstr "Opgegeven adres &gebruiken voor ping:"
#~ msgid "Use reconnect dela&y in seconds:"
#~ msgstr "Vertraging voor opnieu&w verbinden in seconden:"
#~ msgid "FreeS/WAN or Openswan"
#~ msgstr "FreeS/WAN of Openswan"
#, fuzzy
#~ msgid "Please enter %1 specific settings:"
#~ msgstr "FreeSWAN/OpenSWAN-specifieke instellingen invoeren:"
#~ msgid "FreeS/WAN settings"
#~ msgstr "FreeS/WAN-instellingen"
#~ msgid "New profile wizard racoon/FreeSWAN (OpenSWAN)"
#~ msgstr "Nieuw-profiel-assistent racoon/FreeSWAN (OpenSWAN)"
#~ msgid "FreeSWAN / Openswan specific settings"
#~ msgstr "FreeSWAN / Openswan-specifieke instellingen"
#, fuzzy
#~ msgid "Use right next hop:"
#~ msgstr "Volgende hop rechts:"
#~ msgid "Racoon/*SWAN"
#~ msgstr "Racoon/*SWAN"
#, fuzzy
#~ msgid "Use userdefinied port:"
#~ msgstr "Gespecificeerde poort gebruiken:"
#~ msgid "Use HTTP pro&xy"
#~ msgstr "HTTP-pro&xy gebruiken"
#, fuzzy
#~ msgid "Disable protocol f ield compression"
#~ msgstr "L&ZO-compressie uitschakelen"
#~ msgid "D&o not use MPPC compression"
#~ msgstr "Geen MPPC-c&ompressie gebruiken"
#~ msgid "&Do not use deflate method"
#~ msgstr "Geen &deflate-methode gebruiken"
#~ msgid "Retrieve DNS server from peer"
#~ msgstr "DNS-server ophalen van peer"
#~ msgid "Refuse 12&8 bit encryption"
#~ msgstr "12&8 bits versleuteling weigeren"
#~ msgid "Do not use BSD &compression"
#~ msgstr "Geen BSD-&compressie gebruiken"
#~ msgid "Refuse &EAP"
#~ msgstr "&EAP weigeren"
#~ msgid "import password"
#~ msgstr "wachtwoord importeren"
#~ msgid "Certificate import: password was requested, send it..."
#~ msgstr "Certificaatimport: wachtwoord werd verzocht, wordt verzonden..."
#, fuzzy
#~ msgid "Private key password, private key needs passphrase"
#~ msgstr "Wachtwoord van private sleutel mag niet leeg zijn."
#, fuzzy
#~ msgid ""
#~ "Private key password can't be empty because private key is protected "
#~ "with a passphrase."
#~ msgstr ""
#~ "Veld van wachtwoord voor private sleutel mag niet leeg zijn of minder dan "
#~ "4 lettertekens bevatten."
#~ msgid "Certificate import: doCacert()"
#~ msgstr "Certificaatimport: doCacert()"
#, fuzzy
#~ msgid "Certificate import: doCreateHash()"
#~ msgstr "Certificaatimport: doCacert()"
#, fuzzy
#~ msgid "Certificate import: doLink()"
#~ msgstr "Certificaatimport: doCacert()"
#, fuzzy
#~ msgid "Certificate import: exit()"
#~ msgstr "Certificaatimport: doCacert()"
#~ msgid "Certificate import: %2"
#~ msgstr "Certificaatimport: %2"
#~ msgid "P12: freeswan"
#~ msgstr "P12: freeswan"
#~ msgid "IPSec (FreeSWAN)"
#~ msgstr "IPSec (FreeSWAN)"
#, fuzzy
#~ msgid " error: certificate enrollment failed."
#~ msgstr "Certificaatformaat"
#, fuzzy
#~ msgid "File&name:"
#~ msgstr "Bestandsnaam:"
#~ msgid "Import &P12 certificate..."
#~ msgstr "&P12-certificaat importeren..."
#, fuzzy
#~ msgid ""
#~ "\n"
#~ "status: connected\n"
#~ "server: %1\n"
#~ "user: %2\n"
#~ "IPSec ID: %3\n"
#~ "duration: %3\n"
#~ "profile: 4"
#~ msgstr ""
#~ "\n"
#~ "status: verbonden\n"
#~ "server: %1\n"
#~ "gebruiker: %2\n"
#~ "IPsec-id: %3\n"
#~ "duur: %4\n"
#~ "profiel: %5 (%6)"
#~ msgid "Found "
#~ msgstr "Gevonden "
#, fuzzy
#~ msgid "Authentication method:"
#~ msgstr "Authenticatiemethode"
#~ msgid "Setting %1 debug level %2."
#~ msgstr "Stelt %1 debugniveau %2 in."
#, fuzzy
#~ msgid "find"
#~ msgstr "Profiel"
#~ msgid "Show Log"
#~ msgstr "Log tonen"
#~ msgid "PPTP debug level:"
#~ msgstr "Niveau PPTP-debugging:"
#~ msgid "Group password"
#~ msgstr "Groepswachtwoord"
#~ msgid "Group password is empty but you dont have checked to allow that!"
#~ msgstr ""
#~ "Groepswachtwoord is leeg maar u hebt niet aangegeven dat u dat toestaat."
#~ msgid "\"%1\" was successful."
#~ msgstr "\"%1\" was succesvol."
#, fuzzy
#~ msgid "Using %s."
#~ msgstr "UDP wordt gebruikt"
#~ msgid "Using advanced settings."
#~ msgstr "Geavanceerde instellingen gebruiken."
#~ msgid "Advanced Settings"
#~ msgstr "Geavanceerde instellingen"
#, fuzzy
#~ msgid "DH group:"
#~ msgstr "IKE DH-groep:"
#~ msgid "Disable Perfect Forward Secrecy"
#~ msgstr "Perfect Forward Secrecy uitschakelen"
#~ msgid "Advanced settings"
#~ msgstr "Geavanceerde instellingen"
#~ msgid "MD5"
#~ msgstr "MD5"
#, fuzzy
#~ msgid "Sa&ve PSK and password"
#~ msgstr "Gebruikersnaam, PSK en wachtwoord op&slaan"
#, fuzzy
#~ msgid "Sa&ve PSK, username and password"
#~ msgstr "Gebruikersnaam en wachtwoord opslaan"
#~ msgid "Save username and password"
#~ msgstr "Gebruikersnaam en wachtwoord opslaan"
#~ msgid "Username from dlg: %1"
#~ msgstr "Gebruikersnaam voor dlg: %1"
#, fuzzy
#~ msgid "Save userna&me, PSK and password"
#~ msgstr "Gebruikersnaam, PSK en wachtwoord op&slaan"
#~ msgid "OpenVPN import: ca cert file %1 copied to %2."
#~ msgstr "OpenVPN-import: CA-certificaatbestand %1 gekopieerd naar %2."
#~ msgid "OpenVPN import: ca cert file %1 could not open for writing."
#~ msgstr ""
#~ "OpenVPN-import: CA-certificaatbestand %1 kon niet voor schrijven worden "
#~ "geopend."
#~ msgid "OpenVPN import: ca cert file %1 could not open for reading."
#~ msgstr ""
#~ "OpenVPN-import: CA-certificaatbestand %1 kon niet voor lezen worden "
#~ "geopend."
#~ msgid "OpenVPN import: try to copy pre shared key file %1 to %2."
#~ msgstr ""
#~ "OpenVPN-import: probeer bestand met pre shared key %1 te kopiëren naar %2."
#~ msgid "OpenVPN import: X509 cert file %1 copied to %2."
#~ msgstr "OpenVPN-import: X509-certificaatbestand %1 gekopieerd naar %2."
#~ msgid "OpenVPN import: X509 cert file %1 could not open for writing."
#~ msgstr ""
#~ "OpenVPN-import: X509-certificaatbestand %1 kon niet voor schrijven worden "
#~ "geopend."
#~ msgid "OpenVPN import: X509 cert file %1 could not open for reading."
#~ msgstr ""
#~ "OpenVPN-import: X509-certificaatbestand %1 kon niet voor lezen worden "
#~ "geopend."
#~ msgid "OpenVPN import: pre shared key file %1 copied to %2."
#~ msgstr "OpenVPN-import: bestand met preshared key %1 gekopieerd naar %2."
#~ msgid "OpenVPN import: pre shared key file %1 could not open for writing."
#~ msgstr ""
#~ "OpenVPN-import: bestand met pre shared key %1 kon niet voor schrijven "
#~ "worden geopend."
#~ msgid "OpenVPN import: pre shared key file %1 could not open for reading."
#~ msgstr ""
#~ "OpenVPN-import: bestand met pre shared key %1 kon niet voor lezen worden "
#~ "geopend."
#~ msgid "Peer timeout value (%1 s) reached. Reconnecing..."
#~ msgstr ""
#~ "Timeout-waarde voor peer (%1 s) is bereikt. Verbinding wordt opnieuw "
#~ "opgebouwd..."
#~ msgid "After this number of seconds kvpnc considers peer not responding"
#~ msgstr "Na dit aantal seconden beschouwd kvpnc de peer als niet-reagerend"
#~ msgid "Peer response timeout (sec.)"
#~ msgstr "Timeout voor peer-respons (sec.)"
#~ msgid "After this number of seconds kvpnc considers peer not responding"
#~ msgstr ""
#~ "Na dit aantal seconden beschouwd kvpnc de peer als niet-reagerend"
#~ msgid "&Cisco"
#~ msgstr "&Cisco"
#~ msgid "got 'need ok' message"
#~ msgstr "ontving bericht 'need ok'"
#~ msgid "got 'need username/password' message"
#~ msgstr "ontving bericht 'need username/password'"
#~ msgid "got SUCCESS for username message"
#~ msgstr "ontving 'SUCCES' voor gebruikersnaam"
#~ msgid "got 'HTTP Proxy password' message"
#~ msgstr "ontving bericht 'HTTP Proxy password' "
#~ msgid "got SUCCESS for proxy username message"
#~ msgstr "ontving SUCCES voor proxygebruikersnaam"
#~ msgid "got 'private key password' message"
#~ msgstr "ontving bericht 'private key password'"
#, fuzzy
#~ msgid "got SUCCESS for 'eToken token' password message"
#~ msgstr "ontving 'SUCCES' voor gebruikersnaam"
#~ msgid "These are settings for FreeS/WAN and racoon which are mandatory."
#~ msgstr "Instellingen voor FreeS/WAN en racoon"
#, fuzzy
#~ msgid "&Use specified local port:"
#~ msgstr "Opgegeven &lokale poort gebruiken:"
#~ msgid "setkey"
#~ msgstr "setkey"
#, fuzzy
#~ msgid "X.509 ificate"
#~ msgstr "X.509-certificaat"
#~ msgid "Certificate/PSK"
#~ msgstr "Certificaat/PSK"
#~ msgid "Preferences"
#~ msgstr "Voorkeuren"
#~ msgid "&Write log file"
#~ msgstr "Logbestand schrij&ven"
#~ msgid ""
#~ "Enable this to do writing a log file. Its located at /root/.trinity/share/"
#~ "apps/kvpnc/kvpnc.log"
#~ msgstr ""
#~ "Schakel dit in om naar een logbestand te schrijven. Het logbestand kan "
#~ "gevonden worden in /root/.trinity/share/apps/kvpnc/kvpnc.log"
#~ msgid "This is the debug level of vpnc"
#~ msgstr "Dit is het debuglevel van vpnc"
#~ msgid "Dont quit b&y clicking close button"
#~ msgstr "Niet afsluiten bij het klikken op de sl&uitknop"
#~ msgid "&Keep connection files"
#~ msgstr "Verbindingsbestanden be&houden"
#~ msgid "Show debug console"
#~ msgstr "Debugconsole tonen"
#~ msgid "Connect Options"
#~ msgstr "Verbindingsopties"
#~ msgid "Minimi&ze after connect"
#~ msgstr "Minimali&seren na verbinding"
#~ msgid "Enable this to let kvpnc minimize in kicker after succesful connect"
#~ msgstr ""
#~ "Schakel dit in om kvpnc te minimaliseren in kicker na een succesvolle "
#~ "verbinding"
#~ msgid ""
#~ "Disconnect and exit without warning\n"
#~ "if still connected and quit called"
#~ msgstr ""
#~ "Verbinding verbreken en stoppen zonder waarschuwing\n"
#~ " als er nog een verbinding is en \"quit\" wordt aangeroepen"
#~ msgid "Do auto connect at startup"
#~ msgstr "Automatisch verbinden bij opstarten"
#~ msgid "Enable this to let connect kvpnc to a given profile at startup"
#~ msgstr ""
#~ "Schakel dit in om KVpnc te laten verbinden met een opgegeven profiel "
#~ "tijdens het opstarten"
#~ msgid "Try connect timeout (s)"
#~ msgstr "Probeer verbinding timeout (s)"
#~ msgid "Log Output"
#~ msgstr "Uitvoer loggen"
#~ msgid "Color Settings"
#~ msgstr "Kleurinstellingen"
#~ msgid "Change..."
#~ msgstr "Wijzigen..."
#~ msgid "Enable colorized log output"
#~ msgstr "Gekleurde loguitvoer activeren"
#~ msgid "Font size"
#~ msgstr "Tekengrootte"
#~ msgid "Programs are in PATH"
#~ msgstr "Programma's bevinden zich in het zoekpad"
#~ msgid "Path to \"vpnc\":"
#~ msgstr "Pad naar \"vpnc\""
#~ msgid "Path to \"ipsec\":"
#~ msgstr "Pad naar \"ipsec\""
#~ msgid "This is the path to vpnc-connect"
#~ msgstr "Dit is het pad naar vpnc-connect"
#~ msgid "Path to \"setkey\":"
#~ msgstr "Pad naar \"setkey\":"
#, fuzzy
#~ msgid "Path to \"racoon\":"
#~ msgstr "Pad naar \"racoon\":"
#~ msgid "PPPD"
#~ msgstr "PPPD"
#~ msgid "Path to \"pppd\":"
#~ msgstr "Pad naar \"pppd\":"
#~ msgid "Enable debug"
#~ msgstr "Debug aanzetten"
#~ msgid "Path to \"openvpn\":"
#~ msgstr "Pad naar \"openvpn\":"
#~ msgid "Debug level"
#~ msgstr "Debugniveau"
#~ msgid "Dae&mons"
#~ msgstr "Dae&mons"
#~ msgid "Path to \"killall\":"
#~ msgstr "Pad naar \"killall\":"
#~ msgid "Path to \"ip\":"
#~ msgstr "Pad naar \"ip\":"
#~ msgid "Path to \"openssl\":"
#~ msgstr "Pad naar \"openssl\":"
#~ msgid "Path to \"iptables\""
#~ msgstr "Pad naar \"iptables\""
#~ msgid "Path to \"route\":"
#~ msgstr "Pad naar \"route\":"
#~ msgid "Path to \"kill\":"
#~ msgstr "Pad naar \"kill\":"
#~ msgid "Path to \"ifconfig\":"
#~ msgstr "Pad naar \"ifconfig\":"
#~ msgid ""
#~ "The required daemons (%2 and %2) are available, connect will be enabled."
#~ msgstr ""
#~ "De vereiste daemons (%2 en %2) zijn beschikbaar.Verbinden zal worden "
#~ "geactiveerd."
#~ msgid "&New Profile..."
#~ msgstr "&Nieuw profiel..."
#~ msgid "Left or right ID is empty!"
#~ msgstr "Linker- of rechter-id is leeg."
#~ msgid "OpenVPN configuration error."
#~ msgstr "Fout in OpenVPN-configuratie."
#~ msgid "Connection timed out, \"%1\" killed."
#~ msgstr "Time-out bij verbinding, \"%1\" afgesloten."
#~ msgid "Connected: %2@%1 (%3), %4"
#~ msgstr "Verbonden: %2@%1 (%3), %4"
#~ msgid "Network device: %1"
#~ msgstr "Netwerkapparaat: %1"
#~ msgid "Private key password"
#~ msgstr "Wachtwoord van private sleutel"
#~ msgid "Use special remote &ID"
#~ msgstr "Speciale remote-&id gebruiken"
#~ msgid "&Keep default route"
#~ msgstr "Standaardroute be&houden"
#~ msgid "Keep the default route"
#~ msgstr "De standaardroute behouden"
#~ msgid "UDP port &for NAT-T:"
#~ msgstr "UDP-poort &voor NAT-T:"
#~ msgid "Redirect all outgoing IP traffic over the &VPN"
#~ msgstr "Al het uitgaande IP-verkeer over de &VPN leiden"
#~ msgid "Use no IP by default"
#~ msgstr "Standaard geen IP gebruiken"
#~ msgid "Accept only peer with common name:"
#~ msgstr "Alleen peer met een algemene naam accepteren:"
#~ msgid "Require peer ns cert type:"
#~ msgstr "Peer ns-certificaattype vereisen:"
#~ msgid "Use specified &MTU:"
#~ msgstr "Gebruikergedefinieerde &MTU:"
#~ msgid "Use specified Maximum Transmission Unit size"
#~ msgstr "Gebruik de opgegeven grootte voor Maximum Transmission Unit"
#~ msgid "The MTU size for pptp connection"
#~ msgstr "De MTU-grootte voor PPTP-verbinding"
#~ msgid "Save password in config file (or in TDEWallet if available)"
#~ msgstr ""
#~ "Wachtwoord opslaan in configuratiebestand (of in TDEWallet indien "
#~ "beschikbaar)"
#~ msgid "Do no&t save username"
#~ msgstr "Gebruikersnaam nie&t opslaan"
#~ msgid "Do not save the username in config file nor TDEWallet"
#~ msgstr ""
#~ "Sla de gebruikersnaam niet op in het configuratiebestand of in TDEWallet"
#~ msgid "raccon"
#~ msgstr "racoon"
#~ msgid "req: %1, msg: %2"
#~ msgstr "verzoek: %1, bericht: %2"
#~ msgid "'needok': %1"
#~ msgstr "'needok': %1"
|
|