diff options
Diffstat (limited to 'webclients/novnc/vendor/pako/lib/zlib/inflate.js')
| -rw-r--r-- | webclients/novnc/vendor/pako/lib/zlib/inflate.js | 1527 |
1 files changed, 1527 insertions, 0 deletions
diff --git a/webclients/novnc/vendor/pako/lib/zlib/inflate.js b/webclients/novnc/vendor/pako/lib/zlib/inflate.js new file mode 100644 index 0000000..b79b396 --- /dev/null +++ b/webclients/novnc/vendor/pako/lib/zlib/inflate.js @@ -0,0 +1,1527 @@ +import * as utils from "../utils/common.js"; +import adler32 from "./adler32.js"; +import crc32 from "./crc32.js"; +import inflate_fast from "./inffast.js"; +import inflate_table from "./inftrees.js"; + +var CODES = 0; +var LENS = 1; +var DISTS = 2; + +/* Public constants ==========================================================*/ +/* ===========================================================================*/ + + +/* Allowed flush values; see deflate() and inflate() below for details */ +//var Z_NO_FLUSH = 0; +//var Z_PARTIAL_FLUSH = 1; +//var Z_SYNC_FLUSH = 2; +//var Z_FULL_FLUSH = 3; +var Z_FINISH = 4; +var Z_BLOCK = 5; +var Z_TREES = 6; + + +/* Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ +var Z_OK = 0; +var Z_STREAM_END = 1; +var Z_NEED_DICT = 2; +//var Z_ERRNO = -1; +var Z_STREAM_ERROR = -2; +var Z_DATA_ERROR = -3; +var Z_MEM_ERROR = -4; +var Z_BUF_ERROR = -5; +//var Z_VERSION_ERROR = -6; + +/* The deflate compression method */ +var Z_DEFLATED = 8; + + +/* STATES ====================================================================*/ +/* ===========================================================================*/ + + +var HEAD = 1; /* i: waiting for magic header */ +var FLAGS = 2; /* i: waiting for method and flags (gzip) */ +var TIME = 3; /* i: waiting for modification time (gzip) */ +var OS = 4; /* i: waiting for extra flags and operating system (gzip) */ +var EXLEN = 5; /* i: waiting for extra length (gzip) */ +var EXTRA = 6; /* i: waiting for extra bytes (gzip) */ +var NAME = 7; /* i: waiting for end of file name (gzip) */ +var COMMENT = 8; /* i: waiting for end of comment (gzip) */ +var HCRC = 9; /* i: waiting for header crc (gzip) */ +var DICTID = 10; /* i: waiting for dictionary check value */ +var DICT = 11; /* waiting for inflateSetDictionary() call */ +var TYPE = 12; /* i: waiting for type bits, including last-flag bit */ +var TYPEDO = 13; /* i: same, but skip check to exit inflate on new block */ +var STORED = 14; /* i: waiting for stored size (length and complement) */ +var COPY_ = 15; /* i/o: same as COPY below, but only first time in */ +var COPY = 16; /* i/o: waiting for input or output to copy stored block */ +var TABLE = 17; /* i: waiting for dynamic block table lengths */ +var LENLENS = 18; /* i: waiting for code length code lengths */ +var CODELENS = 19; /* i: waiting for length/lit and distance code lengths */ +var LEN_ = 20; /* i: same as LEN below, but only first time in */ +var LEN = 21; /* i: waiting for length/lit/eob code */ +var LENEXT = 22; /* i: waiting for length extra bits */ +var DIST = 23; /* i: waiting for distance code */ +var DISTEXT = 24; /* i: waiting for distance extra bits */ +var MATCH = 25; /* o: waiting for output space to copy string */ +var LIT = 26; /* o: waiting for output space to write literal */ +var CHECK = 27; /* i: waiting for 32-bit check value */ +var LENGTH = 28; /* i: waiting for 32-bit length (gzip) */ +var DONE = 29; /* finished check, done -- remain here until reset */ +var BAD = 30; /* got a data error -- remain here until reset */ +var MEM = 31; /* got an inflate() memory error -- remain here until reset */ +var SYNC = 32; /* looking for synchronization bytes to restart inflate() */ + +/* ===========================================================================*/ + + + +var ENOUGH_LENS = 852; +var ENOUGH_DISTS = 592; +//var ENOUGH = (ENOUGH_LENS+ENOUGH_DISTS); + +var MAX_WBITS = 15; +/* 32K LZ77 window */ +var DEF_WBITS = MAX_WBITS; + + +function zswap32(q) { + return (((q >>> 24) & 0xff) + + ((q >>> 8) & 0xff00) + + ((q & 0xff00) << 8) + + ((q & 0xff) << 24)); +} + + +function InflateState() { + this.mode = 0; /* current inflate mode */ + this.last = false; /* true if processing last block */ + this.wrap = 0; /* bit 0 true for zlib, bit 1 true for gzip */ + this.havedict = false; /* true if dictionary provided */ + this.flags = 0; /* gzip header method and flags (0 if zlib) */ + this.dmax = 0; /* zlib header max distance (INFLATE_STRICT) */ + this.check = 0; /* protected copy of check value */ + this.total = 0; /* protected copy of output count */ + // TODO: may be {} + this.head = null; /* where to save gzip header information */ + + /* sliding window */ + this.wbits = 0; /* log base 2 of requested window size */ + this.wsize = 0; /* window size or zero if not using window */ + this.whave = 0; /* valid bytes in the window */ + this.wnext = 0; /* window write index */ + this.window = null; /* allocated sliding window, if needed */ + + /* bit accumulator */ + this.hold = 0; /* input bit accumulator */ + this.bits = 0; /* number of bits in "in" */ + + /* for string and stored block copying */ + this.length = 0; /* literal or length of data to copy */ + this.offset = 0; /* distance back to copy string from */ + + /* for table and code decoding */ + this.extra = 0; /* extra bits needed */ + + /* fixed and dynamic code tables */ + this.lencode = null; /* starting table for length/literal codes */ + this.distcode = null; /* starting table for distance codes */ + this.lenbits = 0; /* index bits for lencode */ + this.distbits = 0; /* index bits for distcode */ + + /* dynamic table building */ + this.ncode = 0; /* number of code length code lengths */ + this.nlen = 0; /* number of length code lengths */ + this.ndist = 0; /* number of distance code lengths */ + this.have = 0; /* number of code lengths in lens[] */ + this.next = null; /* next available space in codes[] */ + + this.lens = new utils.Buf16(320); /* temporary storage for code lengths */ + this.work = new utils.Buf16(288); /* work area for code table building */ + + /* + because we don't have pointers in js, we use lencode and distcode directly + as buffers so we don't need codes + */ + //this.codes = new utils.Buf32(ENOUGH); /* space for code tables */ + this.lendyn = null; /* dynamic table for length/literal codes (JS specific) */ + this.distdyn = null; /* dynamic table for distance codes (JS specific) */ + this.sane = 0; /* if false, allow invalid distance too far */ + this.back = 0; /* bits back of last unprocessed length/lit */ + this.was = 0; /* initial length of match */ +} + +function inflateResetKeep(strm) { + var state; + + if (!strm || !strm.state) { return Z_STREAM_ERROR; } + state = strm.state; + strm.total_in = strm.total_out = state.total = 0; + strm.msg = ''; /*Z_NULL*/ + if (state.wrap) { /* to support ill-conceived Java test suite */ + strm.adler = state.wrap & 1; + } + state.mode = HEAD; + state.last = 0; + state.havedict = 0; + state.dmax = 32768; + state.head = null/*Z_NULL*/; + state.hold = 0; + state.bits = 0; + //state.lencode = state.distcode = state.next = state.codes; + state.lencode = state.lendyn = new utils.Buf32(ENOUGH_LENS); + state.distcode = state.distdyn = new utils.Buf32(ENOUGH_DISTS); + + state.sane = 1; + state.back = -1; + //Tracev((stderr, "inflate: reset\n")); + return Z_OK; +} + +function inflateReset(strm) { + var state; + + if (!strm || !strm.state) { return Z_STREAM_ERROR; } + state = strm.state; + state.wsize = 0; + state.whave = 0; + state.wnext = 0; + return inflateResetKeep(strm); + +} + +function inflateReset2(strm, windowBits) { + var wrap; + var state; + + /* get the state */ + if (!strm || !strm.state) { return Z_STREAM_ERROR; } + state = strm.state; + + /* extract wrap request from windowBits parameter */ + if (windowBits < 0) { + wrap = 0; + windowBits = -windowBits; + } + else { + wrap = (windowBits >> 4) + 1; + if (windowBits < 48) { + windowBits &= 15; + } + } + + /* set number of window bits, free window if different */ + if (windowBits && (windowBits < 8 || windowBits > 15)) { + return Z_STREAM_ERROR; + } + if (state.window !== null && state.wbits !== windowBits) { + state.window = null; + } + + /* update state and reset the rest of it */ + state.wrap = wrap; + state.wbits = windowBits; + return inflateReset(strm); +} + +function inflateInit2(strm, windowBits) { + var ret; + var state; + + if (!strm) { return Z_STREAM_ERROR; } + //strm.msg = Z_NULL; /* in case we return an error */ + + state = new InflateState(); + + //if (state === Z_NULL) return Z_MEM_ERROR; + //Tracev((stderr, "inflate: allocated\n")); + strm.state = state; + state.window = null/*Z_NULL*/; + ret = inflateReset2(strm, windowBits); + if (ret !== Z_OK) { + strm.state = null/*Z_NULL*/; + } + return ret; +} + +function inflateInit(strm) { + return inflateInit2(strm, DEF_WBITS); +} + + +/* + Return state with length and distance decoding tables and index sizes set to + fixed code decoding. Normally this returns fixed tables from inffixed.h. + If BUILDFIXED is defined, then instead this routine builds the tables the + first time it's called, and returns those tables the first time and + thereafter. This reduces the size of the code by about 2K bytes, in + exchange for a little execution time. However, BUILDFIXED should not be + used for threaded applications, since the rewriting of the tables and virgin + may not be thread-safe. + */ +var virgin = true; + +var lenfix, distfix; // We have no pointers in JS, so keep tables separate + +function fixedtables(state) { + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + var sym; + + lenfix = new utils.Buf32(512); + distfix = new utils.Buf32(32); + + /* literal/length table */ + sym = 0; + while (sym < 144) { state.lens[sym++] = 8; } + while (sym < 256) { state.lens[sym++] = 9; } + while (sym < 280) { state.lens[sym++] = 7; } + while (sym < 288) { state.lens[sym++] = 8; } + + inflate_table(LENS, state.lens, 0, 288, lenfix, 0, state.work, { bits: 9 }); + + /* distance table */ + sym = 0; + while (sym < 32) { state.lens[sym++] = 5; } + + inflate_table(DISTS, state.lens, 0, 32, distfix, 0, state.work, { bits: 5 }); + + /* do this just once */ + virgin = false; + } + + state.lencode = lenfix; + state.lenbits = 9; + state.distcode = distfix; + state.distbits = 5; +} + + +/* + Update the window with the last wsize (normally 32K) bytes written before + returning. If window does not exist yet, create it. This is only called + when a window is already in use, or when output has been written during this + inflate call, but the end of the deflate stream has not been reached yet. + It is also called to create a window for dictionary data when a dictionary + is loaded. + + Providing output buffers larger than 32K to inflate() should provide a speed + advantage, since only the last 32K of output is copied to the sliding window + upon return from inflate(), and since all distances after the first 32K of + output will fall in the output data, making match copies simpler and faster. + The advantage may be dependent on the size of the processor's data caches. + */ +function updatewindow(strm, src, end, copy) { + var dist; + var state = strm.state; + + /* if it hasn't been done already, allocate space for the window */ + if (state.window === null) { + state.wsize = 1 << state.wbits; + state.wnext = 0; + state.whave = 0; + + state.window = new utils.Buf8(state.wsize); + } + + /* copy state->wsize or less output bytes into the circular window */ + if (copy >= state.wsize) { + utils.arraySet(state.window, src, end - state.wsize, state.wsize, 0); + state.wnext = 0; + state.whave = state.wsize; + } + else { + dist = state.wsize - state.wnext; + if (dist > copy) { + dist = copy; + } + //zmemcpy(state->window + state->wnext, end - copy, dist); + utils.arraySet(state.window, src, end - copy, dist, state.wnext); + copy -= dist; + if (copy) { + //zmemcpy(state->window, end - copy, copy); + utils.arraySet(state.window, src, end - copy, copy, 0); + state.wnext = copy; + state.whave = state.wsize; + } + else { + state.wnext += dist; + if (state.wnext === state.wsize) { state.wnext = 0; } + if (state.whave < state.wsize) { state.whave += dist; } + } + } + return 0; +} + +function inflate(strm, flush) { + var state; + var input, output; // input/output buffers + var next; /* next input INDEX */ + var put; /* next output INDEX */ + var have, left; /* available input and output */ + var hold; /* bit buffer */ + var bits; /* bits in bit buffer */ + var _in, _out; /* save starting available input and output */ + var copy; /* number of stored or match bytes to copy */ + var from; /* where to copy match bytes from */ + var from_source; + var here = 0; /* current decoding table entry */ + var here_bits, here_op, here_val; // paked "here" denormalized (JS specific) + //var last; /* parent table entry */ + var last_bits, last_op, last_val; // paked "last" denormalized (JS specific) + var len; /* length to copy for repeats, bits to drop */ + var ret; /* return code */ + var hbuf = new utils.Buf8(4); /* buffer for gzip header crc calculation */ + var opts; + + var n; // temporary var for NEED_BITS + + var order = /* permutation of code lengths */ + [ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 ]; + + + if (!strm || !strm.state || !strm.output || + (!strm.input && strm.avail_in !== 0)) { + return Z_STREAM_ERROR; + } + + state = strm.state; + if (state.mode === TYPE) { state.mode = TYPEDO; } /* skip check */ + + + //--- LOAD() --- + put = strm.next_out; + output = strm.output; + left = strm.avail_out; + next = strm.next_in; + input = strm.input; + have = strm.avail_in; + hold = state.hold; + bits = state.bits; + //--- + + _in = have; + _out = left; + ret = Z_OK; + + inf_leave: // goto emulation + for (;;) { + switch (state.mode) { + case HEAD: + if (state.wrap === 0) { + state.mode = TYPEDO; + break; + } + //=== NEEDBITS(16); + while (bits < 16) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + if ((state.wrap & 2) && hold === 0x8b1f) { /* gzip header */ + state.check = 0/*crc32(0L, Z_NULL, 0)*/; + //=== CRC2(state.check, hold); + hbuf[0] = hold & 0xff; + hbuf[1] = (hold >>> 8) & 0xff; + state.check = crc32(state.check, hbuf, 2, 0); + //===// + + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + state.mode = FLAGS; + break; + } + state.flags = 0; /* expect zlib header */ + if (state.head) { + state.head.done = false; + } + if (!(state.wrap & 1) || /* check if zlib header allowed */ + (((hold & 0xff)/*BITS(8)*/ << 8) + (hold >> 8)) % 31) { + strm.msg = 'incorrect header check'; + state.mode = BAD; + break; + } + if ((hold & 0x0f)/*BITS(4)*/ !== Z_DEFLATED) { + strm.msg = 'unknown compression method'; + state.mode = BAD; + break; + } + //--- DROPBITS(4) ---// + hold >>>= 4; + bits -= 4; + //---// + len = (hold & 0x0f)/*BITS(4)*/ + 8; + if (state.wbits === 0) { + state.wbits = len; + } + else if (len > state.wbits) { + strm.msg = 'invalid window size'; + state.mode = BAD; + break; + } + state.dmax = 1 << len; + //Tracev((stderr, "inflate: zlib header ok\n")); + strm.adler = state.check = 1/*adler32(0L, Z_NULL, 0)*/; + state.mode = hold & 0x200 ? DICTID : TYPE; + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + break; + case FLAGS: + //=== NEEDBITS(16); */ + while (bits < 16) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + state.flags = hold; + if ((state.flags & 0xff) !== Z_DEFLATED) { + strm.msg = 'unknown compression method'; + state.mode = BAD; + break; + } + if (state.flags & 0xe000) { + strm.msg = 'unknown header flags set'; + state.mode = BAD; + break; + } + if (state.head) { + state.head.text = ((hold >> 8) & 1); + } + if (state.flags & 0x0200) { + //=== CRC2(state.check, hold); + hbuf[0] = hold & 0xff; + hbuf[1] = (hold >>> 8) & 0xff; + state.check = crc32(state.check, hbuf, 2, 0); + //===// + } + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + state.mode = TIME; + /* falls through */ + case TIME: + //=== NEEDBITS(32); */ + while (bits < 32) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + if (state.head) { + state.head.time = hold; + } + if (state.flags & 0x0200) { + //=== CRC4(state.check, hold) + hbuf[0] = hold & 0xff; + hbuf[1] = (hold >>> 8) & 0xff; + hbuf[2] = (hold >>> 16) & 0xff; + hbuf[3] = (hold >>> 24) & 0xff; + state.check = crc32(state.check, hbuf, 4, 0); + //=== + } + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + state.mode = OS; + /* falls through */ + case OS: + //=== NEEDBITS(16); */ + while (bits < 16) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + if (state.head) { + state.head.xflags = (hold & 0xff); + state.head.os = (hold >> 8); + } + if (state.flags & 0x0200) { + //=== CRC2(state.check, hold); + hbuf[0] = hold & 0xff; + hbuf[1] = (hold >>> 8) & 0xff; + state.check = crc32(state.check, hbuf, 2, 0); + //===// + } + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + state.mode = EXLEN; + /* falls through */ + case EXLEN: + if (state.flags & 0x0400) { + //=== NEEDBITS(16); */ + while (bits < 16) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + state.length = hold; + if (state.head) { + state.head.extra_len = hold; + } + if (state.flags & 0x0200) { + //=== CRC2(state.check, hold); + hbuf[0] = hold & 0xff; + hbuf[1] = (hold >>> 8) & 0xff; + state.check = crc32(state.check, hbuf, 2, 0); + //===// + } + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + } + else if (state.head) { + state.head.extra = null/*Z_NULL*/; + } + state.mode = EXTRA; + /* falls through */ + case EXTRA: + if (state.flags & 0x0400) { + copy = state.length; + if (copy > have) { copy = have; } + if (copy) { + if (state.head) { + len = state.head.extra_len - state.length; + if (!state.head.extra) { + // Use untyped array for more conveniend processing later + state.head.extra = new Array(state.head.extra_len); + } + utils.arraySet( + state.head.extra, + input, + next, + // extra field is limited to 65536 bytes + // - no need for additional size check + copy, + /*len + copy > state.head.extra_max - len ? state.head.extra_max : copy,*/ + len + ); + //zmemcpy(state.head.extra + len, next, + // len + copy > state.head.extra_max ? + // state.head.extra_max - len : copy); + } + if (state.flags & 0x0200) { + state.check = crc32(state.check, input, copy, next); + } + have -= copy; + next += copy; + state.length -= copy; + } + if (state.length) { break inf_leave; } + } + state.length = 0; + state.mode = NAME; + /* falls through */ + case NAME: + if (state.flags & 0x0800) { + if (have === 0) { break inf_leave; } + copy = 0; + do { + // TODO: 2 or 1 bytes? + len = input[next + copy++]; + /* use constant limit because in js we should not preallocate memory */ + if (state.head && len && + (state.length < 65536 /*state.head.name_max*/)) { + state.head.name += String.fromCharCode(len); + } + } while (len && copy < have); + + if (state.flags & 0x0200) { + state.check = crc32(state.check, input, copy, next); + } + have -= copy; + next += copy; + if (len) { break inf_leave; } + } + else if (state.head) { + state.head.name = null; + } + state.length = 0; + state.mode = COMMENT; + /* falls through */ + case COMMENT: + if (state.flags & 0x1000) { + if (have === 0) { break inf_leave; } + copy = 0; + do { + len = input[next + copy++]; + /* use constant limit because in js we should not preallocate memory */ + if (state.head && len && + (state.length < 65536 /*state.head.comm_max*/)) { + state.head.comment += String.fromCharCode(len); + } + } while (len && copy < have); + if (state.flags & 0x0200) { + state.check = crc32(state.check, input, copy, next); + } + have -= copy; + next += copy; + if (len) { break inf_leave; } + } + else if (state.head) { + state.head.comment = null; + } + state.mode = HCRC; + /* falls through */ + case HCRC: + if (state.flags & 0x0200) { + //=== NEEDBITS(16); */ + while (bits < 16) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + if (hold !== (state.check & 0xffff)) { + strm.msg = 'header crc mismatch'; + state.mode = BAD; + break; + } + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + } + if (state.head) { + state.head.hcrc = ((state.flags >> 9) & 1); + state.head.done = true; + } + strm.adler = state.check = 0; + state.mode = TYPE; + break; + case DICTID: + //=== NEEDBITS(32); */ + while (bits < 32) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + strm.adler = state.check = zswap32(hold); + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + state.mode = DICT; + /* falls through */ + case DICT: + if (state.havedict === 0) { + //--- RESTORE() --- + strm.next_out = put; + strm.avail_out = left; + strm.next_in = next; + strm.avail_in = have; + state.hold = hold; + state.bits = bits; + //--- + return Z_NEED_DICT; + } + strm.adler = state.check = 1/*adler32(0L, Z_NULL, 0)*/; + state.mode = TYPE; + /* falls through */ + case TYPE: + if (flush === Z_BLOCK || flush === Z_TREES) { break inf_leave; } + /* falls through */ + case TYPEDO: + if (state.last) { + //--- BYTEBITS() ---// + hold >>>= bits & 7; + bits -= bits & 7; + //---// + state.mode = CHECK; + break; + } + //=== NEEDBITS(3); */ + while (bits < 3) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + state.last = (hold & 0x01)/*BITS(1)*/; + //--- DROPBITS(1) ---// + hold >>>= 1; + bits -= 1; + //---// + + switch ((hold & 0x03)/*BITS(2)*/) { + case 0: /* stored block */ + //Tracev((stderr, "inflate: stored block%s\n", + // state.last ? " (last)" : "")); + state.mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + //Tracev((stderr, "inflate: fixed codes block%s\n", + // state.last ? " (last)" : "")); + state.mode = LEN_; /* decode codes */ + if (flush === Z_TREES) { + //--- DROPBITS(2) ---// + hold >>>= 2; + bits -= 2; + //---// + break inf_leave; + } + break; + case 2: /* dynamic block */ + //Tracev((stderr, "inflate: dynamic codes block%s\n", + // state.last ? " (last)" : "")); + state.mode = TABLE; + break; + case 3: + strm.msg = 'invalid block type'; + state.mode = BAD; + } + //--- DROPBITS(2) ---// + hold >>>= 2; + bits -= 2; + //---// + break; + case STORED: + //--- BYTEBITS() ---// /* go to byte boundary */ + hold >>>= bits & 7; + bits -= bits & 7; + //---// + //=== NEEDBITS(32); */ + while (bits < 32) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + if ((hold & 0xffff) !== ((hold >>> 16) ^ 0xffff)) { + strm.msg = 'invalid stored block lengths'; + state.mode = BAD; + break; + } + state.length = hold & 0xffff; + //Tracev((stderr, "inflate: stored length %u\n", + // state.length)); + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + state.mode = COPY_; + if (flush === Z_TREES) { break inf_leave; } + /* falls through */ + case COPY_: + state.mode = COPY; + /* falls through */ + case COPY: + copy = state.length; + if (copy) { + if (copy > have) { copy = have; } + if (copy > left) { copy = left; } + if (copy === 0) { break inf_leave; } + //--- zmemcpy(put, next, copy); --- + utils.arraySet(output, input, next, copy, put); + //---// + have -= copy; + next += copy; + left -= copy; + put += copy; + state.length -= copy; + break; + } + //Tracev((stderr, "inflate: stored end\n")); + state.mode = TYPE; + break; + case TABLE: + //=== NEEDBITS(14); */ + while (bits < 14) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + state.nlen = (hold & 0x1f)/*BITS(5)*/ + 257; + //--- DROPBITS(5) ---// + hold >>>= 5; + bits -= 5; + //---// + state.ndist = (hold & 0x1f)/*BITS(5)*/ + 1; + //--- DROPBITS(5) ---// + hold >>>= 5; + bits -= 5; + //---// + state.ncode = (hold & 0x0f)/*BITS(4)*/ + 4; + //--- DROPBITS(4) ---// + hold >>>= 4; + bits -= 4; + //---// +//#ifndef PKZIP_BUG_WORKAROUND + if (state.nlen > 286 || state.ndist > 30) { + strm.msg = 'too many length or distance symbols'; + state.mode = BAD; + break; + } +//#endif + //Tracev((stderr, "inflate: table sizes ok\n")); + state.have = 0; + state.mode = LENLENS; + /* falls through */ + case LENLENS: + while (state.have < state.ncode) { + //=== NEEDBITS(3); + while (bits < 3) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + state.lens[order[state.have++]] = (hold & 0x07);//BITS(3); + //--- DROPBITS(3) ---// + hold >>>= 3; + bits -= 3; + //---// + } + while (state.have < 19) { + state.lens[order[state.have++]] = 0; + } + // We have separate tables & no pointers. 2 commented lines below not needed. + //state.next = state.codes; + //state.lencode = state.next; + // Switch to use dynamic table + state.lencode = state.lendyn; + state.lenbits = 7; + + opts = { bits: state.lenbits }; + ret = inflate_table(CODES, state.lens, 0, 19, state.lencode, 0, state.work, opts); + state.lenbits = opts.bits; + + if (ret) { + strm.msg = 'invalid code lengths set'; + state.mode = BAD; + break; + } + //Tracev((stderr, "inflate: code lengths ok\n")); + state.have = 0; + state.mode = CODELENS; + /* falls through */ + case CODELENS: + while (state.have < state.nlen + state.ndist) { + for (;;) { + here = state.lencode[hold & ((1 << state.lenbits) - 1)];/*BITS(state.lenbits)*/ + here_bits = here >>> 24; + here_op = (here >>> 16) & 0xff; + here_val = here & 0xffff; + + if ((here_bits) <= bits) { break; } + //--- PULLBYTE() ---// + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + //---// + } + if (here_val < 16) { + //--- DROPBITS(here.bits) ---// + hold >>>= here_bits; + bits -= here_bits; + //---// + state.lens[state.have++] = here_val; + } + else { + if (here_val === 16) { + //=== NEEDBITS(here.bits + 2); + n = here_bits + 2; + while (bits < n) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + //--- DROPBITS(here.bits) ---// + hold >>>= here_bits; + bits -= here_bits; + //---// + if (state.have === 0) { + strm.msg = 'invalid bit length repeat'; + state.mode = BAD; + break; + } + len = state.lens[state.have - 1]; + copy = 3 + (hold & 0x03);//BITS(2); + //--- DROPBITS(2) ---// + hold >>>= 2; + bits -= 2; + //---// + } + else if (here_val === 17) { + //=== NEEDBITS(here.bits + 3); + n = here_bits + 3; + while (bits < n) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + //--- DROPBITS(here.bits) ---// + hold >>>= here_bits; + bits -= here_bits; + //---// + len = 0; + copy = 3 + (hold & 0x07);//BITS(3); + //--- DROPBITS(3) ---// + hold >>>= 3; + bits -= 3; + //---// + } + else { + //=== NEEDBITS(here.bits + 7); + n = here_bits + 7; + while (bits < n) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + //--- DROPBITS(here.bits) ---// + hold >>>= here_bits; + bits -= here_bits; + //---// + len = 0; + copy = 11 + (hold & 0x7f);//BITS(7); + //--- DROPBITS(7) ---// + hold >>>= 7; + bits -= 7; + //---// + } + if (state.have + copy > state.nlen + state.ndist) { + strm.msg = 'invalid bit length repeat'; + state.mode = BAD; + break; + } + while (copy--) { + state.lens[state.have++] = len; + } + } + } + + /* handle error breaks in while */ + if (state.mode === BAD) { break; } + + /* check for end-of-block code (better have one) */ + if (state.lens[256] === 0) { + strm.msg = 'invalid code -- missing end-of-block'; + state.mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftrees.h + concerning the ENOUGH constants, which depend on those values */ + state.lenbits = 9; + + opts = { bits: state.lenbits }; + ret = inflate_table(LENS, state.lens, 0, state.nlen, state.lencode, 0, state.work, opts); + // We have separate tables & no pointers. 2 commented lines below not needed. + // state.next_index = opts.table_index; + state.lenbits = opts.bits; + // state.lencode = state.next; + + if (ret) { + strm.msg = 'invalid literal/lengths set'; + state.mode = BAD; + break; + } + + state.distbits = 6; + //state.distcode.copy(state.codes); + // Switch to use dynamic table + state.distcode = state.distdyn; + opts = { bits: state.distbits }; + ret = inflate_table(DISTS, state.lens, state.nlen, state.ndist, state.distcode, 0, state.work, opts); + // We have separate tables & no pointers. 2 commented lines below not needed. + // state.next_index = opts.table_index; + state.distbits = opts.bits; + // state.distcode = state.next; + + if (ret) { + strm.msg = 'invalid distances set'; + state.mode = BAD; + break; + } + //Tracev((stderr, 'inflate: codes ok\n')); + state.mode = LEN_; + if (flush === Z_TREES) { break inf_leave; } + /* falls through */ + case LEN_: + state.mode = LEN; + /* falls through */ + case LEN: + if (have >= 6 && left >= 258) { + //--- RESTORE() --- + strm.next_out = put; + strm.avail_out = left; + strm.next_in = next; + strm.avail_in = have; + state.hold = hold; + state.bits = bits; + //--- + inflate_fast(strm, _out); + //--- LOAD() --- + put = strm.next_out; + output = strm.output; + left = strm.avail_out; + next = strm.next_in; + input = strm.input; + have = strm.avail_in; + hold = state.hold; + bits = state.bits; + //--- + + if (state.mode === TYPE) { + state.back = -1; + } + break; + } + state.back = 0; + for (;;) { + here = state.lencode[hold & ((1 << state.lenbits) - 1)]; /*BITS(state.lenbits)*/ + here_bits = here >>> 24; + here_op = (here >>> 16) & 0xff; + here_val = here & 0xffff; + + if (here_bits <= bits) { break; } + //--- PULLBYTE() ---// + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + //---// + } + if (here_op && (here_op & 0xf0) === 0) { + last_bits = here_bits; + last_op = here_op; + last_val = here_val; + for (;;) { + here = state.lencode[last_val + + ((hold & ((1 << (last_bits + last_op)) - 1))/*BITS(last.bits + last.op)*/ >> last_bits)]; + here_bits = here >>> 24; + here_op = (here >>> 16) & 0xff; + here_val = here & 0xffff; + + if ((last_bits + here_bits) <= bits) { break; } + //--- PULLBYTE() ---// + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + //---// + } + //--- DROPBITS(last.bits) ---// + hold >>>= last_bits; + bits -= last_bits; + //---// + state.back += last_bits; + } + //--- DROPBITS(here.bits) ---// + hold >>>= here_bits; + bits -= here_bits; + //---// + state.back += here_bits; + state.length = here_val; + if (here_op === 0) { + //Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + // "inflate: literal '%c'\n" : + // "inflate: literal 0x%02x\n", here.val)); + state.mode = LIT; + break; + } + if (here_op & 32) { + //Tracevv((stderr, "inflate: end of block\n")); + state.back = -1; + state.mode = TYPE; + break; + } + if (here_op & 64) { + strm.msg = 'invalid literal/length code'; + state.mode = BAD; + break; + } + state.extra = here_op & 15; + state.mode = LENEXT; + /* falls through */ + case LENEXT: + if (state.extra) { + //=== NEEDBITS(state.extra); + n = state.extra; + while (bits < n) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + state.length += hold & ((1 << state.extra) - 1)/*BITS(state.extra)*/; + //--- DROPBITS(state.extra) ---// + hold >>>= state.extra; + bits -= state.extra; + //---// + state.back += state.extra; + } + //Tracevv((stderr, "inflate: length %u\n", state.length)); + state.was = state.length; + state.mode = DIST; + /* falls through */ + case DIST: + for (;;) { + here = state.distcode[hold & ((1 << state.distbits) - 1)];/*BITS(state.distbits)*/ + here_bits = here >>> 24; + here_op = (here >>> 16) & 0xff; + here_val = here & 0xffff; + + if ((here_bits) <= bits) { break; } + //--- PULLBYTE() ---// + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + //---// + } + if ((here_op & 0xf0) === 0) { + last_bits = here_bits; + last_op = here_op; + last_val = here_val; + for (;;) { + here = state.distcode[last_val + + ((hold & ((1 << (last_bits + last_op)) - 1))/*BITS(last.bits + last.op)*/ >> last_bits)]; + here_bits = here >>> 24; + here_op = (here >>> 16) & 0xff; + here_val = here & 0xffff; + + if ((last_bits + here_bits) <= bits) { break; } + //--- PULLBYTE() ---// + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + //---// + } + //--- DROPBITS(last.bits) ---// + hold >>>= last_bits; + bits -= last_bits; + //---// + state.back += last_bits; + } + //--- DROPBITS(here.bits) ---// + hold >>>= here_bits; + bits -= here_bits; + //---// + state.back += here_bits; + if (here_op & 64) { + strm.msg = 'invalid distance code'; + state.mode = BAD; + break; + } + state.offset = here_val; + state.extra = (here_op) & 15; + state.mode = DISTEXT; + /* falls through */ + case DISTEXT: + if (state.extra) { + //=== NEEDBITS(state.extra); + n = state.extra; + while (bits < n) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + state.offset += hold & ((1 << state.extra) - 1)/*BITS(state.extra)*/; + //--- DROPBITS(state.extra) ---// + hold >>>= state.extra; + bits -= state.extra; + //---// + state.back += state.extra; + } +//#ifdef INFLATE_STRICT + if (state.offset > state.dmax) { + strm.msg = 'invalid distance too far back'; + state.mode = BAD; + break; + } +//#endif + //Tracevv((stderr, "inflate: distance %u\n", state.offset)); + state.mode = MATCH; + /* falls through */ + case MATCH: + if (left === 0) { break inf_leave; } + copy = _out - left; + if (state.offset > copy) { /* copy from window */ + copy = state.offset - copy; + if (copy > state.whave) { + if (state.sane) { + strm.msg = 'invalid distance too far back'; + state.mode = BAD; + break; + } +// (!) This block is disabled in zlib defailts, +// don't enable it for binary compatibility +//#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR +// Trace((stderr, "inflate.c too far\n")); +// copy -= state.whave; +// if (copy > state.length) { copy = state.length; } +// if (copy > left) { copy = left; } +// left -= copy; +// state.length -= copy; +// do { +// output[put++] = 0; +// } while (--copy); +// if (state.length === 0) { state.mode = LEN; } +// break; +//#endif + } + if (copy > state.wnext) { + copy -= state.wnext; + from = state.wsize - copy; + } + else { + from = state.wnext - copy; + } + if (copy > state.length) { copy = state.length; } + from_source = state.window; + } + else { /* copy from output */ + from_source = output; + from = put - state.offset; + copy = state.length; + } + if (copy > left) { copy = left; } + left -= copy; + state.length -= copy; + do { + output[put++] = from_source[from++]; + } while (--copy); + if (state.length === 0) { state.mode = LEN; } + break; + case LIT: + if (left === 0) { break inf_leave; } + output[put++] = state.length; + left--; + state.mode = LEN; + break; + case CHECK: + if (state.wrap) { + //=== NEEDBITS(32); + while (bits < 32) { + if (have === 0) { break inf_leave; } + have--; + // Use '|' insdead of '+' to make sure that result is signed + hold |= input[next++] << bits; + bits += 8; + } + //===// + _out -= left; + strm.total_out += _out; + state.total += _out; + if (_out) { + strm.adler = state.check = + /*UPDATE(state.check, put - _out, _out);*/ + (state.flags ? crc32(state.check, output, _out, put - _out) : adler32(state.check, output, _out, put - _out)); + + } + _out = left; + // NB: crc32 stored as signed 32-bit int, zswap32 returns signed too + if ((state.flags ? hold : zswap32(hold)) !== state.check) { + strm.msg = 'incorrect data check'; + state.mode = BAD; + break; + } + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + //Tracev((stderr, "inflate: check matches trailer\n")); + } + state.mode = LENGTH; + /* falls through */ + case LENGTH: + if (state.wrap && state.flags) { + //=== NEEDBITS(32); + while (bits < 32) { + if (have === 0) { break inf_leave; } + have--; + hold += input[next++] << bits; + bits += 8; + } + //===// + if (hold !== (state.total & 0xffffffff)) { + strm.msg = 'incorrect length check'; + state.mode = BAD; + break; + } + //=== INITBITS(); + hold = 0; + bits = 0; + //===// + //Tracev((stderr, "inflate: length matches trailer\n")); + } + state.mode = DONE; + /* falls through */ + case DONE: + ret = Z_STREAM_END; + break inf_leave; + case BAD: + ret = Z_DATA_ERROR; + break inf_leave; + case MEM: + return Z_MEM_ERROR; + case SYNC: + /* falls through */ + default: + return Z_STREAM_ERROR; + } + } + + // inf_leave <- here is real place for "goto inf_leave", emulated via "break inf_leave" + + /* + Return from inflate(), updating the total counts and the check value. + If there was no progress during the inflate() call, return a buffer + error. Call updatewindow() to create and/or update the window state. + Note: a memory error from inflate() is non-recoverable. + */ + + //--- RESTORE() --- + strm.next_out = put; + strm.avail_out = left; + strm.next_in = next; + strm.avail_in = have; + state.hold = hold; + state.bits = bits; + //--- + + if (state.wsize || (_out !== strm.avail_out && state.mode < BAD && + (state.mode < CHECK || flush !== Z_FINISH))) { + if (updatewindow(strm, strm.output, strm.next_out, _out - strm.avail_out)) { + state.mode = MEM; + return Z_MEM_ERROR; + } + } + _in -= strm.avail_in; + _out -= strm.avail_out; + strm.total_in += _in; + strm.total_out += _out; + state.total += _out; + if (state.wrap && _out) { + strm.adler = state.check = /*UPDATE(state.check, strm.next_out - _out, _out);*/ + (state.flags ? crc32(state.check, output, _out, strm.next_out - _out) : adler32(state.check, output, _out, strm.next_out - _out)); + } + strm.data_type = state.bits + (state.last ? 64 : 0) + + (state.mode === TYPE ? 128 : 0) + + (state.mode === LEN_ || state.mode === COPY_ ? 256 : 0); + if (((_in === 0 && _out === 0) || flush === Z_FINISH) && ret === Z_OK) { + ret = Z_BUF_ERROR; + } + return ret; +} + +function inflateEnd(strm) { + + if (!strm || !strm.state /*|| strm->zfree == (free_func)0*/) { + return Z_STREAM_ERROR; + } + + var state = strm.state; + if (state.window) { + state.window = null; + } + strm.state = null; + return Z_OK; +} + +function inflateGetHeader(strm, head) { + var state; + + /* check state */ + if (!strm || !strm.state) { return Z_STREAM_ERROR; } + state = strm.state; + if ((state.wrap & 2) === 0) { return Z_STREAM_ERROR; } + + /* save header structure */ + state.head = head; + head.done = false; + return Z_OK; +} + +function inflateSetDictionary(strm, dictionary) { + var dictLength = dictionary.length; + + var state; + var dictid; + var ret; + + /* check state */ + if (!strm /* == Z_NULL */ || !strm.state /* == Z_NULL */) { return Z_STREAM_ERROR; } + state = strm.state; + + if (state.wrap !== 0 && state.mode !== DICT) { + return Z_STREAM_ERROR; + } + + /* check for correct dictionary identifier */ + if (state.mode === DICT) { + dictid = 1; /* adler32(0, null, 0)*/ + /* dictid = adler32(dictid, dictionary, dictLength); */ + dictid = adler32(dictid, dictionary, dictLength, 0); + if (dictid !== state.check) { + return Z_DATA_ERROR; + } + } + /* copy dictionary to window using updatewindow(), which will amend the + existing dictionary if appropriate */ + ret = updatewindow(strm, dictionary, dictLength, dictLength); + if (ret) { + state.mode = MEM; + return Z_MEM_ERROR; + } + state.havedict = 1; + // Tracev((stderr, "inflate: dictionary set\n")); + return Z_OK; +} + +export { inflateReset, inflateReset2, inflateResetKeep, inflateInit, inflateInit2, inflate, inflateEnd, inflateGetHeader, inflateSetDictionary }; +export var inflateInfo = 'pako inflate (from Nodeca project)'; + +/* Not implemented +exports.inflateCopy = inflateCopy; +exports.inflateGetDictionary = inflateGetDictionary; +exports.inflateMark = inflateMark; +exports.inflatePrime = inflatePrime; +exports.inflateSync = inflateSync; +exports.inflateSyncPoint = inflateSyncPoint; +exports.inflateUndermine = inflateUndermine; +*/ |