Added KDE3 version of PikLab

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/applications/piklab@1095639 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

13 files changed, 759 insertions, 0 deletions

diff --git a/test/gputils/blinker/blinker.asm b/test/gputils/blinker/blinker.asm
new file mode 100644
index 0000000..42f946b
--- /dev/null
+++ b/test/gputils/blinker/blinker.asm
@@ -0,0 +1,148 @@
+
+    #include    <p16f877.inc>   ; processor specific variable definitions
+
+    __CONFIG _CP_OFF & _WDT_OFF & _BODEN_OFF & _PWRTE_ON & _XT_OSC & _WRT_ENABLE_ON & _LVP_OFF & _CPD_OFF
+    ;__CONFIG _CP_OFF & _WDT_OFF & _PWRTE_ON & _EXTRC_CLKOUT
+
+;**********************************************************************
+M_SAVE_STATE macro
+    movwf w_saved
+    movfw STATUS
+    movwf status_saved
+    endm
+
+M_RESTORE_STATE macro
+    movfw status_saved
+    movwf STATUS
+    swapf w_saved,f
+    swapf w_saved,w
+    endm
+
+BANK0 = 0x0
+BANK1 = 0x80
+BANK2 = 0x100
+BANK3 = 0x180
+
+;**********************************************************************
+INT_VAR UDATA_SHR 0x20
+w_saved      RES 1
+status_saved RES 1
+pclath_saved RES 1
+INT1_VAR UDATA_SHR 0xA0
+w_saved1     RES 1
+
+TEMP_VAR UDATA_SHR
+count        RES 1
+count2       RES 1
+ledA         RES 1
+ledC         RES 1
+ledB         RES 1
+
+;**********************************************************************
+STARTUP CODE 0x000          ; processor reset vector
+    nop                     ; for debugger
+    movlw   high start      ; load upper byte of 'start' label
+    movwf   PCLATH          ; initialize PCLATH
+    goto    start           ; go to beginning of program
+
+;**********************************************************************
+INT_VECTOR CODE 0x004       ; interrupt vector location
+    goto interrupt
+
+;**********************************************************************
+PROG1 CODE
+interrupt
+    M_SAVE_STATE
+    M_SAVE_STATE ; try using twice a macro
+
+; increment duty cycle
+;    btfss  CCP1CON ^ BANK0,4
+;    goto   duty_cycle_inc_bit0
+;    bcf    CCP1CON ^ BANK0,4
+;    btfss  CCP1CON ^ BANK0,5
+;    goto   duty_cycle_inc_bit1
+;    bcf    CCP1CON ^ BANK0,5
+;    incfsz CCPR1L ^ BANK0,f
+;    goto   update_duty_cycle_done
+;duty_cycle_inc_bit0
+;    bsf    CCP1CON ^ BANK0,4
+;    goto   update_duty_cycle_done
+;duty_cycle_inc_bit1
+;    bsf    CCP1CON ^ BANK0,5
+;update_duty_cycle_done
+
+; increment count
+    decfsz  count,1
+    goto    done
+    movlw   .10
+    movwf   count
+
+; blink and output
+    movfw   ledB
+    xorlw   B'00001111'
+    movwf   ledB
+    movwf   PORTB
+
+done
+    bcf INTCON,2            ; reset TMR0 interrupt flag
+    M_RESTORE_STATE
+    retfie                  ; return from interrupt
+
+;**********************************************************************
+start
+; initialize microchip
+    clrf TMR0 ^ BANK0
+    clrf INTCON ^ BANK0
+;    clrf PORTA ^ BANK0
+    clrf PORTB ^ BANK0
+;    clrf PORTC ^ BANK0
+;    clrf PORTD ^ BANK0
+;    clrf PORTE ^ BANK0
+    banksel TRISA       ; bank 1
+;    clrf TRISA ^ BANK1  ; all outputs
+    clrf TRISB ^ BANK1  ; all outputs
+;    clrf TRISC ^ BANK1  ; all outputs
+;   clrf TRISD ^ BANK1  ; all outputs
+;   clrf TRISE ^ BANK1  ; all outputs
+    movlw B'11010101'   ; set prescaler to 64
+    movwf OPTION_REG ^ BANK1 ; and start TMR0 (internal source clock)
+;    movlw B'00000110'   ; set PORTA and PORTE to be all digital
+;    movwf ADCON1 ^ BANK1
+    banksel INTCON      ; back to bank 0
+    bsf INTCON,T0IE     ; enable TMR0 interrupt
+    bsf INTCON,GIE      ; enable all interrupts
+
+; initialize PWM
+;    CLRF CCP1CON ^ BANK0  ; disable CCP module
+;    CLRF TMR2 ^ BANK0     ; clear Timer2 (also set the pre-scaler to 1)
+;    MOVLW .1
+;    MOVWF CCPR1L ^ BANK0  ; set duty cycle = (CCPR1L+1)/(PR2+1) [25% for (31+1)/(127+1)]
+;    banksel PR2           ; select bank 1
+;    MOVLW .255
+;    MOVWF PR2 ^ BANK1     ; set period = Fosc/4/pre-scaler/(PR2+1)
+;    BCF TRISC ^ BANK1,2   ; set CCP1 pin as output
+;    banksel PIR1          ; back to bank 0
+;    MOVLW B'001100'
+;    MOVWF CCP1CON ^ BANK0 ; set PWM mode (the 2 LSBs of the duty cycle are set to '00')
+;    BSF T2CON ^ BANK0,TMR2ON ; Timer2 starts to increment
+
+    ; The CCP1 interrupt is disabled,
+    ; do polling on the TMR2 Interrupt flag bit
+;PWM_Period_Match
+;   BTFSS PIR1, TMR2IF
+;   GOTO PWM_Period_Match
+
+    ; Update this PWM period and the following PWM Duty cycle
+;   BCF PIR1, TMR2IF
+
+; initialize variables
+    movlw B'00000101'
+    movwf ledB
+    movlw .10
+    movwf count
+
+; loop forever
+    goto $
+
+;**********************************************************************
+    END
diff --git a/test/gputils/blinker/blinker.piklab b/test/gputils/blinker/blinker.piklab
new file mode 100644
index 0000000..4ac7729
--- /dev/null
+++ b/test/gputils/blinker/blinker.piklab
@@ -0,0 +1,89 @@
+<!DOCTYPE piklab>
+<piklab>
+  <general>
+    <files>
+      <item>blinker.asm</item>
+    </files>
+    <version>0.1</version>
+    <description/>
+    <device>16F877</device>
+    <tool>gputils</tool>
+    <custom_linker_script/>
+    <is_library>true</is_library>
+    <output_type>executable</output_type>
+    <opened_files>
+      <item>blinker.asm</item>
+    </opened_files>
+  </general>
+  <assembler>
+    <warning_level>0</warning_level>
+    <include_dir/>
+    <custom_options/>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_arguments>
+      <item>-c</item>
+      <item>-I$(SRCPATH)</item>
+      <item>-p%DEVICE</item>
+      <item>-w1</item>
+      <item>%I</item>
+      <item>-g</item>
+      <item>-I/usr/share/gputils/header</item>
+    </custom_arguments>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+  </assembler>
+  <linker>
+    <debug>0</debug>
+    <hex_format>inhx32</hex_format>
+    <object_dir/>
+    <custom_options/>
+    <format>inhx32</format>
+    <custom_linker_script>/home/nicolas/prog/piklab/piklab/test/sdcc/16f873.lkr</custom_linker_script>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_libraries/>
+    <custom_arguments>
+      <item>-o%O</item>
+      <item>-c</item>
+      <item>-ainhx32</item>
+      <item>-m</item>
+      <item>-I$(SRCPATH)</item>
+      <item>$LKR(-s%LKR)</item>
+      <item>%OBJS</item>
+      <item>%LIBS</item>
+    </custom_arguments>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+  </linker>
+  <sdcc>
+    <custom_options/>
+    <include_dir/>
+  </sdcc>
+  <compiler>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_options/>
+    <warning_level>0</warning_level>
+    <custom_arguments>
+      <item>-I$(SRCPATH)</item>
+      <item>-I</item>
+      <item>-p</item>
+      <item>%DEVICE</item>
+      <item>%I</item>
+    </custom_arguments>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+  </compiler>
+  <librarian>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_options/>
+    <custom_arguments>
+      <item>-c</item>
+      <item>%O</item>
+      <item>%OBJS</item>
+      <item>%LIBS</item>
+    </custom_arguments>
+  </librarian>
+  <editors/>
+</piklab>
diff --git a/test/gputils/blinker18/blinker_18.asm b/test/gputils/blinker18/blinker_18.asm
new file mode 100644
index 0000000..4a00daf
--- /dev/null
+++ b/test/gputils/blinker18/blinker_18.asm
@@ -0,0 +1,59 @@
+;    LIST    p=18F452      ;PIC18F452 is the target processor
+    INCLUDE "p18f452.inc"  ;Include file with register defines
+
+	;Programming Configuration Information
+	__CONFIG    _CONFIG1H, _XT_OSC_1H				;XT HS PLL (10MHz XTAL)
+	__CONFIG    _CONFIG2L, _BOR_ON_2L & _PWRT_ON_2L	;Power-Up timer ON, Brown-out at 2.7V
+
+	__CONFIG    _CONFIG2H, _WDT_OFF_2H & _WDTPS_1_2H				;WDT OFF for debug
+	__CONFIG    _CONFIG3H, _CCP2MX_OFF_3H							;CCP Module Off
+	__CONFIG    _CONFIG4L, _LVP_OFF_4L & _DEBUG_OFF_4L
+	
+	;UnProtect entire device program space for DEBUG
+	__CONFIG    _CONFIG5L, _CP0_OFF_5L & _CP1_OFF_5L & _CP2_OFF_5L
+	__CONFIG    _CONFIG5H, _CPB_OFF_5H & _CPD_OFF_5H
+	__CONFIG    _CONFIG6L, _WRT0_OFF_6L & _WRT1_OFF_6L & _WRT2_OFF_6L
+	__CONFIG    _CONFIG6H, _WRTC_OFF_6H & _WRTB_OFF_6H & _WRTD_OFF_6H
+
+;Assorted miscellaneous general-purpose registers
+DlyRegA     equ     0x3D   ;Temp register for delay
+DlyRegB     equ     0x3E   ;Temp register for delay
+DlyRegC     equ     0x3F   ;Temp register for delay
+
+STARTUP CODE 0x000
+	nop					;Required for ICD Debugging
+	nop
+	goto Main
+		
+Main
+	clrf	BSR,A	 	;Ensure BSR register points to first block
+	clrf    TRISB,A
+	movlw   0x7
+	movwf   PORTB,A
+
+Loop
+	bsf		PORTB,0	;Turn the LED on
+	call	LongDelay
+	bcf		PORTB,0	;Turn the LED off
+	call	LongDelay
+	goto	Loop
+
+;A long delay
+LongDelay
+		movlw   H'10'		;Adjust to produce a suitable time delay
+		movwf   DlyRegA
+ldelayc	movlw   H'10'
+		movwf   DlyRegB
+ldelayb movlw   H'FF'
+		movwf   DlyRegC
+ldelaya decfsz  DlyRegC,f	;Inner Loop
+		goto    ldelaya
+		decfsz  DlyRegB,f   ;Middle Loop
+		goto    ldelayb
+		decfsz  DlyRegA,f   ;Outer Loop
+		goto    ldelayc
+		return
+
+       END
+
+
diff --git a/test/gputils/blinker18/blinker_18.piklab b/test/gputils/blinker18/blinker_18.piklab
new file mode 100644
index 0000000..c1582de
--- /dev/null
+++ b/test/gputils/blinker18/blinker_18.piklab
@@ -0,0 +1,52 @@
+<!DOCTYPE piklab>
+<piklab>
+  <general>
+    <device>18F452</device>
+    <files>
+      <item>blinker_18.asm</item>
+    </files>
+    <watched_ios>
+      <item>3969</item>
+    </watched_ios>
+    <description/>
+    <version>0.1</version>
+    <tool>gputils</tool>
+    <opened_files>
+      <item>blinker_18.asm</item>
+    </opened_files>
+  </general>
+  <assembler>
+    <custom_options/>
+    <warning_level>0</warning_level>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_arguments>
+      <item>-c</item>
+      <item>-I$(SRCPATH)</item>
+      <item>-w0</item>
+      <item>%I</item>
+      <item>-g</item>
+    </custom_arguments>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+  </assembler>
+  <linker>
+    <custom_options/>
+    <format>inhx32</format>
+    <custom_libraries/>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_arguments>
+      <item>-o%O</item>
+      <item>-c</item>
+      <item>-ainhx8m</item>
+      <item>-m</item>
+      <item>-I$(SRCPATH)</item>
+      <item>$LKR(-s%LKR)</item>
+      <item>%OBJS</item>
+      <item>%LIBS</item>
+    </custom_arguments>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+  </linker>
+</piklab>
diff --git a/test/gputils/compile_error/blinker.asm b/test/gputils/compile_error/blinker.asm
new file mode 100644
index 0000000..cd9f495
--- /dev/null
+++ b/test/gputils/compile_error/blinker.asm
@@ -0,0 +1,145 @@
+;   list        p=16f871        ; list directive to define processor
+    #include    <p16f871.inc>   ; processor specific variable definitions
+
+    __CONFIG _CP_OFF & _WDT_OFF & _BODEN_OFF & _PWRTE_ON & _XT_OSC & _WRT_ENABLE_ON & _LVP_OFF & _CPD_OFF
+    ;__CONFIG _CP_OFF & _WDT_OFF & _PWRTE_ON & _EXTRC_CLKOUT
+
+;**********************************************************************
+M_SAVE_STATE macro
+    mov wf w_saved
+    movfw STATUS
+    movwf status_saved
+    endm
+
+M_RESTORE_STATE macro
+    movfw status_saved
+    movwf STATUS
+    swapf w_saved,f
+    swapf w_saved,w
+    endm
+
+BANK0 = 0x0
+BANK1 = 0x80
+BANK2 = 0x100
+BANK3 = 0x180
+
+;**********************************************************************
+INT_VAR UDATA_SHR
+w_saved      RES 1      ; variable used for context saving
+status_saved RES 1      ; variable used for context saving
+
+TEMP_VAR UDATA_SHR
+count        RES 1
+count2       RES 1
+ledA         RES 1
+ledC         RES 1
+ledB         RES 1
+
+;**********************************************************************
+STARTUP CODE 0x000          ; processor reset vector
+    nop                     ; for debugger
+    movlw   high start      ; load upper byte of 'start' label
+    movwf   PCLATH          ; initialize PCLATH
+    goto    start           ; go to beginning of program
+
+;**********************************************************************
+INT_VECTOR CODE 0x004       ; interrupt vector location
+    goto interrupt
+
+;**********************************************************************
+PROG1 CODE
+interrupt
+    M_SAVE_STATE
+    M_SAVE_STATE ; try using twice a macro
+
+; increment duty cycle
+;    btfss  CCP1CON ^ BANK0,4
+;    goto   duty_cycle_inc_bit0
+;    bcf    CCP1CON ^ BANK0,4
+;    btfss  CCP1CON ^ BANK0,5
+;    goto   duty_cycle_inc_bit1
+;    bcf    CCP1CON ^ BANK0,5
+;    incfsz CCPR1L ^ BANK0,f
+;    goto   update_duty_cycle_done
+;duty_cycle_inc_bit0
+;    bsf    CCP1CON ^ BANK0,4
+;    goto   update_duty_cycle_done
+;duty_cycle_inc_bit1
+;    bsf    CCP1CON ^ BANK0,5
+;update_duty_cycle_done
+
+; increment count
+    decfsz  count,1
+    goto    done
+    movlw   .10
+    movwf   count
+
+; blink and output
+    movfw   ledB
+    xorlw   B'00001111'
+    movwf   ledB
+    movwf   PORTB
+
+done
+    bcf INTCON,2            ; reset TMR0 interrupt flag
+    M_RESTORE_STATE
+    retfie                  ; return from interrupt
+
+;**********************************************************************
+start
+; initialize microchip
+    clrf TMR0 ^ BANK0
+    clrf INTCON ^ BANK0
+;    clrf PORTA ^ BANK0
+    clrf PORTB ^ BANK0
+;    clrf PORTC ^ BANK0
+;    clrf PORTD ^ BANK0
+;    clrf PORTE ^ BANK0
+    banksel TRISA       ; bank 1
+;    clrf TRISA ^ BANK1  ; all outputs
+    clrf TRISB ^ BANK1  ; all outputs
+;    clrf TRISC ^ BANK1  ; all outputs
+;   clrf TRISD ^ BANK1  ; all outputs
+;   clrf TRISE ^ BANK1  ; all outputs
+    movlw B'11010101'   ; set prescaler to 64
+    movwf OPTION_REG ^ BANK1 ; and start TMR0 (internal source clock)
+;    movlw B'00000110'   ; set PORTA and PORTE to be all digital
+;    movwf ADCON1 ^ BANK1
+    banksel INTCON      ; back to bank 0
+    bsf INTCON,T0IE     ; enable TMR0 interrupt
+    bsf INTCON,GIE      ; enable all interrupts
+
+; initialize PWM
+;    CLRF CCP1CON ^ BANK0  ; disable CCP module
+;    CLRF TMR2 ^ BANK0     ; clear Timer2 (also set the pre-scaler to 1)
+;    MOVLW .1
+;    MOVWF CCPR1L ^ BANK0  ; set duty cycle = (CCPR1L+1)/(PR2+1) [25% for (31+1)/(127+1)]
+;    banksel PR2           ; select bank 1
+;    MOVLW .255
+;    MOVWF PR2 ^ BANK1     ; set period = Fosc/4/pre-scaler/(PR2+1)
+;    BCF TRISC ^ BANK1,2   ; set CCP1 pin as output
+;    banksel PIR1          ; back to bank 0
+;    MOVLW B'001100'
+;    MOVWF CCP1CON ^ BANK0 ; set PWM mode (the 2 LSBs of the duty cycle are set to '00')
+;    BSF T2CON ^ BANK0,TMR2ON ; Timer2 starts to increment
+
+    ; The CCP1 interrupt is disabled,
+    ; do polling on the TMR2 Interrupt flag bit
+;PWM_Period_Match
+;   BTFSS PIR1, TMR2IF
+;   GOTO PWM_Period_Match
+
+    ; Update this PWM period and the following PWM Duty cycle
+;   BCF PIR1, TMR2IF
+
+; initialize variables
+    movlw B00000101'
+    movwf ledB
+    movlw .10
+    movwf count
+
+; loop forever
+    goto $
+
+;**********************************************************************
+    END
\ No newline at end of file
diff --git a/test/gputils/compile_error/compile_error.piklab b/test/gputils/compile_error/compile_error.piklab
new file mode 100644
index 0000000..a5d6ad4
--- /dev/null
+++ b/test/gputils/compile_error/compile_error.piklab
@@ -0,0 +1,74 @@
+<!DOCTYPE piklab>
+<piklab>
+  <general>
+    <files>
+      <item>blinker.asm</item>
+    </files>
+    <version>0.1</version>
+    <description/>
+    <device>16F877</device>
+    <tool>gputils</tool>
+    <custom_linker_script/>
+    <opened_files>
+      <item>blinker.asm</item>
+    </opened_files>
+  </general>
+  <assembler>
+    <warning_level>0</warning_level>
+    <include_dir/>
+    <custom_options/>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_arguments>
+      <item>-c</item>
+      <item>-I$(SRCPATH)</item>
+      <item>-p%DEVICE</item>
+      <item>-w1</item>
+      <item>%I</item>
+    </custom_arguments>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+  </assembler>
+  <linker>
+    <debug>0</debug>
+    <hex_format>inhx32</hex_format>
+    <object_dir/>
+    <custom_options/>
+    <format>inhx32</format>
+    <custom_linker_script>/home/nicolas/prog/piklab/piklab/test/sdcc/16f873.lkr</custom_linker_script>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_libraries/>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+    <custom_arguments>
+      <item>-o%O</item>
+      <item>-c</item>
+      <item>-ainhx32</item>
+      <item>-m</item>
+      <item>-I$(SRCPATH)</item>
+      <item>$LKR(-s%LKR)</item>
+      <item>%OBJS</item>
+      <item>%LIBS</item>
+    </custom_arguments>
+  </linker>
+  <sdcc>
+    <custom_options/>
+    <include_dir/>
+  </sdcc>
+  <compiler>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_options/>
+    <warning_level>0</warning_level>
+    <custom_arguments>
+      <item>-I$(SRCPATH)</item>
+      <item>-I</item>
+      <item>-p</item>
+      <item>%DEVICE</item>
+      <item>%I</item>
+    </custom_arguments>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+  </compiler>
+</piklab>
diff --git a/test/gputils/project/test.asm b/test/gputils/project/test.asm
new file mode 100644
index 0000000..e4fcbe8
--- /dev/null
+++ b/test/gputils/project/test.asm
@@ -0,0 +1,60 @@
+;  list      p=16f877
+  #include <p16f871.inc>
+  #include <test.inc>
+
+  __CONFIG _CP_OFF & _WDT_OFF & _BODEN_OFF & _PWRTE_ON & _RC_OSC & _WRT_ENABLE_ON & _LVP_ON & _CPD_OFF
+
+;**********************************************************************
+BANK0 = 0x0
+BANK1 = 0x80
+BANK2 = 0x100
+BANK3 = 0x180
+
+;**********************************************************************
+INT_VAR UDATA_SHR
+w_saved      RES 1 ; variable used for context saving
+status_saved RES 1 ; variable used for context saving
+
+TEMP_VAR UDATA_SHR 0x20
+index       RES 1
+
+;**********************************************************************
+STARTUP CODE                    ; processor reset vector
+        nop                     ; for debugger
+        movlw high start        ; load upper byte of 'start' label
+        movwf PCLATH            ; initialize PCLATH
+        goto  start             ; go to beginning of program
+
+;**********************************************************************
+INT_VECTOR CODE 0x0004          ; interrupt vector location
+        movwf w_saved
+        movfw  STATUS
+        movwf status_saved
+
+        bcf   INTCON,2          ; reset TMR0 interrupt flag
+        bsf   PORTB,0
+
+        movfw  status_saved
+        movwf STATUS
+        swapf w_saved,f
+        swapf w_saved,w
+        retfie                  ; return from interrupt
+
+;**********************************************************************
+MAIN CODE
+start
+; initialize microchip
+        clrf TMR0 ^ BANK0
+        clrf INTCON ^ BANK0
+        banksel TRISA            ; bank 1
+        movlw B'11010100'        ; set prescaler at 32 (32768 Hz / 4 / 256 / 32 = 1 Hz)
+        movwf OPTION_REG ^ BANK1 ; and start TMR0 (internal source clock)
+        movlw B'00000110'        ; set PORTA and PORTE to be all digital
+        movwf ADCON1 ^ BANK1
+        banksel INTCON           ; back to bank 0
+        bsf INTCON,T0IE          ; enable TMR0 interrupt
+        bsf INTCON,GIE           ; enable all interrupts
+
+        nop
+
+        END     ; directive 'end of program'
diff --git a/test/gputils/project/test.inc b/test/gputils/project/test.inc
new file mode 100644
index 0000000..e956bd9
--- /dev/null
+++ b/test/gputils/project/test.inc
@@ -0,0 +1 @@
+; empty
diff --git a/test/gputils/project/test.lib b/test/gputils/project/test.lib
new file mode 100644
index 0000000..d0050e3
--- /dev/null
+++ b/test/gputils/project/test.lib
diff --git a/test/gputils/project/test2.asm b/test/gputils/project/test2.asm
new file mode 100644
index 0000000..6a9ed66
--- /dev/null
+++ b/test/gputils/project/test2.asm
@@ -0,0 +1,6 @@
+MAIN CODE
+
+; loop forever
+    goto $
+        END     ; directive 'end of program'
+
diff --git a/test/gputils/project/test_project.piklab b/test/gputils/project/test_project.piklab
new file mode 100644
index 0000000..2a26260
--- /dev/null
+++ b/test/gputils/project/test_project.piklab
@@ -0,0 +1,52 @@
+<!DOCTYPE piklab>
+<piklab>
+  <general>
+    <files>
+      <item>test.asm</item>
+      <item>test.lib</item>
+      <item>test2.asm</item>
+    </files>
+    <version>0.2</version>
+    <description/>
+    <device>16F871</device>
+    <tool>gputils</tool>
+    <opened_files>
+      <item>test.asm</item>
+      <item>test2.asm</item>
+    </opened_files>
+  </general>
+  <assembler>
+    <warning_level>0</warning_level>
+    <custom_options/>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_arguments>
+      <item>-c</item>
+      <item>-I$(SRCPATH)</item>
+      <item>-p%DEVICE</item>
+      <item>-w0</item>
+      <item>%I</item>
+    </custom_arguments>
+    <includes>
+      <item>$(SRCPATH)</item>
+    </includes>
+  </assembler>
+  <linker>
+    <format>inhx32</format>
+    <custom_options/>
+    <has_custom_arguments>false</has_custom_arguments>
+    <custom_arguments>
+      <item>-o%O</item>
+      <item>-c</item>
+      <item>-ainhx32</item>
+      <item>-m</item>
+      <item>-I$(SRCPATH)</item>
+      <item>$LKR(-s%LKR)</item>
+      <item>%OBJS</item>
+      <item>%LIBS</item>
+    </custom_arguments>
+  </linker>
+  <compiler>
+    <includes>$(SRCPATH)</includes>
+    <custom_options/>
+  </compiler>
+</piklab>
diff --git a/test/gputils/project/test_project.pikprj b/test/gputils/project/test_project.pikprj
new file mode 100644
index 0000000..341ea8d
--- /dev/null
+++ b/test/gputils/project/test_project.pikprj
@@ -0,0 +1,20 @@
+[Assembler]
+include-dir=
+other-options=
+radix=dec
+target-device=16F871
+warn-level=0
+
+[Files]
+inputFiles=test.asm,test2.asm,test.lib
+
+[General]
+description=
+output=test_project.hex
+version=0.1
+
+[Linker]
+debug=false
+hex-format=inhx32
+objs-libs-dir=
+other-options=
diff --git a/test/gputils/standalone/test_stand_alone.asm b/test/gputils/standalone/test_stand_alone.asm
new file mode 100644
index 0000000..27e607a
--- /dev/null
+++ b/test/gputils/standalone/test_stand_alone.asm
@@ -0,0 +1,53 @@
+  list      p=16f877
+  #include <p16f877.inc>
+
+  __CONFIG _CP_ALL & _WDT_OFF & _BODEN_OFF & _PWRTE_ON & _RC_OSC & _WRT_ENABLE_ON & _LVP_ON & _CPD_OFF
+
+;**********************************************************************
+BANK0 = 0x0
+BANK1 = 0x80
+BANK2 = 0x100
+BANK3 = 0x180
+
+;**********************************************************************
+w_saved      EQU 0x70 ; variable used for context saving
+status_saved EQU 0x71 ; variable used for context saving
+index        EQU 0x20
+
+;**********************************************************************
+        ORG 0x000               ; processor reset vector
+        movlw high start        ; load upper byte of 'start' label
+        movwf PCLATH            ; initialize PCLATH
+        goto  start             ; go to beginning of program
+
+;**********************************************************************
+        ORG 0x004               ; interrupt vector location
+        movwf w_saved
+        movfw STATUS
+        movwf status_saved
+
+        bcf   INTCON,2          ; reset TMR0 interrupt flag
+
+        movfw status_saved
+        movwf STATUS
+        swapf w_saved,f
+        swapf w_saved,w
+        retfie                  ; return from interrupt
+
+;**********************************************************************
+start
+; initialize microchip
+        clrf TMR0 ^ BANK0
+        clrf INTCON ^ BANK0
+        banksel TRISA            ; bank 1
+        movlw B'11010100'        ; set prescaler at 32 (32768 Hz / 4 / 256 / 32 = 1 Hz)
+        movwf OPTION_REG ^ BANK1 ; and start TMR0 (internal source clock)
+        movlw B'00000110'        ; set PORTA and PORTE to be all digital
+        movwf ADCON1 ^ BANK1
+        banksel INTCON           ; back to bank 0
+        bsf INTCON,T0IE          ; enable TMR0 interrupt
+        bsf INTCON,GIE           ; enable all interrupts
+
+; loop forever
+    goto $
+        END     ; directive 'end of program'