summaryrefslogtreecommitdiffstats
path: root/tde-i18n-zh_TW/messages/tdegraphics/kdvi.po
diff options
context:
space:
mode:
Diffstat (limited to 'tde-i18n-zh_TW/messages/tdegraphics/kdvi.po')
-rw-r--r--tde-i18n-zh_TW/messages/tdegraphics/kdvi.po1252
1 files changed, 1252 insertions, 0 deletions
diff --git a/tde-i18n-zh_TW/messages/tdegraphics/kdvi.po b/tde-i18n-zh_TW/messages/tdegraphics/kdvi.po
new file mode 100644
index 00000000000..b04f16a50a2
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdegraphics/kdvi.po
@@ -0,0 +1,1252 @@
+# translation of kdvi.po to Chinese Traditional
+# Traditional Chinese translation for kdvi
+# Copyright (C) 2001-2003, 2006 Free Software Foundation, Inc.
+#
+# Original translator: Jing-Jong Shyue <shyue@sonoma.com.tw>, 2001.
+# Last translator: Edward G.J. Lee <edt1023@speedymail.org>, 2002.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kdvi\n"
+"POT-Creation-Date: 2008-07-08 01:19+0200\n"
+"PO-Revision-Date: 2006-07-04 11:23+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: TeXFontDefinition.cpp:108
+msgid "Cannot find font %1, file %2."
+msgstr "無法開啟字型 %1,檔案 %2。"
+
+#: TeXFontDefinition.cpp:124
+#, c-format
+msgid "Checksum mismatch for font file %1"
+msgstr "檔案 %1 的 checksum 檢查值不符"
+
+#: TeXFontDefinition.cpp:133
+msgid "TeX virtual"
+msgstr "TeX 虛擬的"
+
+#: TeXFontDefinition.cpp:142
+msgid "TeX Font Metric"
+msgstr "TeX 字型描述"
+
+#: TeXFontDefinition.cpp:167
+msgid "FreeType"
+msgstr "FreeType"
+
+#: TeXFontDefinition.cpp:172
+#, c-format
+msgid "Cannot recognize format for font file %1"
+msgstr "無法識別字型檔案 %1 的格式"
+
+#: TeXFont_PFB.cpp:44
+msgid ""
+"The font file %1 could be opened and read, but its font format is unsupported."
+msgstr "這個 %1 檔案雖可讀啟,但此種字型格式不被支援。"
+
+#: TeXFont_PFB.cpp:50
+msgid "The font file %1 is broken, or it could not be opened or read."
+msgstr "%1 字型檔破損,或無法被讀取。"
+
+#: TeXFont_PFB.cpp:171
+#, c-format
+msgid ""
+"FreeType reported an error when setting the character size for font file %1."
+msgstr "調整 %1 的字型大小時,FreeType 產生錯誤。"
+
+#: TeXFont_PFB.cpp:187
+msgid "FreeType is unable to load glyph #%1 from font file %2."
+msgstr "FreeType 無法從 %2 載入 #%1 字體。"
+
+#: TeXFont_PFB.cpp:199
+msgid "FreeType is unable to render glyph #%1 from font file %2."
+msgstr "FreeType 無法從 %2 顯示 #%1 字體。"
+
+#: TeXFont_PFB.cpp:212
+msgid "Glyph #%1 is empty."
+msgstr "字體 #%1 是空的。"
+
+#: TeXFont_PFB.cpp:213
+msgid "Glyph #%1 from font file %2 is empty."
+msgstr "字型 %2 中的字體 #%1 是空的。"
+
+#: TeXFont_PFB.cpp:282
+msgid "FreeType is unable to load metric for glyph #%1 from font file %2."
+msgstr "FreeType 無法從 %2 載入 #%1 字體描述資料。"
+
+#: TeXFont_PK.cpp:94
+#, c-format
+msgid "Cannot open font file %1."
+msgstr "無法開啟字型檔案 %1。"
+
+#: TeXFont_PK.cpp:139
+msgid "TexFont_PK::operator[]: Character %1 not defined in font %2"
+msgstr "TexFont_PK::operator[]:字元 %1 沒有定義在字型 %2 中"
+
+#: TeXFont_PK.cpp:457
+msgid "Unexpected %1 in PK file %2"
+msgstr "未預期的 %1 在 PK 檔案 %2"
+
+#: TeXFont_PK.cpp:524
+msgid "The character %1 is too large in file %2"
+msgstr "字元 %1 在檔案 %2 中太大了"
+
+#: TeXFont_PK.cpp:629 TeXFont_PK.cpp:715
+msgid "Wrong number of bits stored: char. %1, font %2"
+msgstr "錯誤的數字或位元被儲存: 字元 %1, 字型 %2"
+
+#: TeXFont_PK.cpp:631 TeXFont_PK.cpp:717
+msgid "Bad pk file (%1), too many bits"
+msgstr "錯誤的 PK 檔案 (%1), 太多位元"
+
+#: TeXFont_PK.cpp:748
+msgid "Font has non-square aspect ratio "
+msgstr "字型有非方塊的長寬比"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Jing-Jong Shyue,Edward G.J. Lee"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "shyue@sonoma.com.tw,edt1023@speedymail.org"
+
+#: dviFile.cpp:112
+msgid "The DVI file does not start with the preamble."
+msgstr "DVI 檔沒有以 preamble 為開頭。"
+
+#: dviFile.cpp:117
+msgid ""
+"The DVI file contains the wrong version of DVI output for this program. Hint: "
+"If you use the typesetting system Omega, you have to use a special program, "
+"such as oxdvi."
+msgstr "DVI 輸出檔的版本錯誤。指引:如果是使用 Omega 來排版的話,請改用專用的程式,例如 oxdvi。"
+
+#: dviFile.cpp:155
+msgid ""
+"The DVI file is badly corrupted. KDVI was not able to find the postamble."
+msgstr "DVI 檔案毀損。KDVI 無法找到 postamble 的部份。"
+
+#: dviFile.cpp:170
+msgid "The postamble does not begin with the POST command."
+msgstr "postamble 不由 POST 指令開始"
+
+#: dviFile.cpp:225
+msgid "The postamble contained a command other than FNTDEF."
+msgstr "postamble 含有非 FNTDEF 的指令。"
+
+#: dviFile.cpp:259
+msgid "The page %1 does not start with the BOP command."
+msgstr "頁 %1 不由 BOP 指令開始。"
+
+#: dviFile.cpp:294
+msgid "Not enough memory to load the DVI-file."
+msgstr "記憶體不足以載入 DVI 檔。"
+
+#: dviFile.cpp:300
+msgid "Could not load the DVI-file."
+msgstr "無法載入 DVI 檔。"
+
+#: dviRenderer.cpp:210
+msgid ""
+"<qt><strong>File corruption!</strong> KDVI had trouble interpreting your DVI "
+"file. Most likely this means that the DVI file is broken.</qt>"
+msgstr "<qt><strong>檔案有誤!</strong> KDVI 無法解譯您的 DVI 檔。很可能您的 DVI 檔已毀損。</qt>"
+
+#: dviRenderer.cpp:212 dviRenderer.cpp:483
+msgid "DVI File Error"
+msgstr "DVI 檔案錯誤"
+
+#: dviRenderer.cpp:262
+msgid "KDVI: Information"
+msgstr "KDVI: 資訊"
+
+#: dviRenderer.cpp:277
+msgid ""
+"<qt>This DVI file contains source file information. You may click into the text "
+"with the middle mouse button, and an editor will open the TeX-source file "
+"immediately.</qt>"
+msgstr "<qt>這個 DVI 檔含有原始文稿資訊。您可以按一下滑鼠中鍵來開啟 TeX 文稿的編輯器。</qt>"
+
+#: dviRenderer.cpp:286
+msgid "Explain in more detail..."
+msgstr "更詳細的解釋......"
+
+#: dviRenderer.cpp:315
+msgid "Embedding PostScript Files"
+msgstr "嵌入 PostScript 檔案"
+
+#: dviRenderer.cpp:345
+msgid "Not all PostScript files could be embedded into your document."
+msgstr "不是所有 PostScript 檔案皆可嵌入你的文件中。"
+
+#: dviRenderer.cpp:348
+msgid ""
+"All external PostScript files were embedded into your document. You will "
+"probably want to save the DVI file now."
+msgstr "所有外部 PostScript 檔已嵌入你的文件中。你最好現在儲存 DVI 檔。"
+
+#: dviRenderer.cpp:439
+msgid ""
+"<qt><strong>File error.</strong> The specified file '%1' does not exist. KDVI "
+"already tried to add the ending '.dvi'.</qt>"
+msgstr "<qt><strong>檔案錯誤。</strong>所指定的檔案 '%1' 不存在。KDVI 已嘗試加入 '.dvi' 副檔名。</qt>"
+
+#: dviRenderer.cpp:441
+msgid "File Error!"
+msgstr "檔案錯誤!"
+
+#: dviRenderer.cpp:452
+msgid ""
+"<qt>Could not open file <nobr><strong>%1</strong></nobr> which has type <strong>"
+"%2</strong>. KDVI can only load DVI (.dvi) files.</qt>"
+msgstr ""
+"<qt>無法開啟 <nobr><strong>%1</strong></nobr>,檔案類型為 <strong>%2</strong>"
+"。KDVI 只能載入 DVI (.dvi) 檔。</qt>"
+
+#: dviRenderer.cpp:463 dviRenderer.cpp:481
+msgid ""
+"<qt>File corruption! KDVI had trouble interpreting your DVI file. Most likely "
+"this means that the DVI file is broken.</qt>"
+msgstr "<qt>檔案有誤!KDVI 無法解譯您的 DVI 檔。很可能您的 DVI 檔已毀損。</qt>"
+
+#: dviRenderer.cpp:640
+msgid ""
+"<qt>You have asked KDVI to locate the place in the DVI file which corresponds "
+"to line %1 in the TeX-file <strong>%2</strong>. It seems, however, that the DVI "
+"file does not contain the necessary source file information. We refer to the "
+"manual of KDVI for a detailed explanation on how to include this information. "
+"Press the F1 key to open the manual.</qt>"
+msgstr ""
+"<qt>您要 KDVI 找到在 <strong>%2</strong> TeX 文稿的 %1 行的相對應位置。但此 DVI 檔並沒有含必要的 TeX "
+"文稿資訊。請按 F1 鍵,參考 KDVI 手冊的詳細說明。</qt>"
+
+#: dviRenderer.cpp:645 dviRenderer.cpp:685
+msgid "Could Not Find Reference"
+msgstr "無法找到參考"
+
+#: dviRenderer.cpp:683
+msgid ""
+"<qt>KDVI was not able to locate the place in the DVI file which corresponds to "
+"line %1 in the TeX-file <strong>%2</strong>.</qt>"
+msgstr "<qt>KDVI 無法找到在 <strong>%2</strong> TeX 文稿的 %1 行的相對應位置。<qt>"
+
+#: dviRenderer.cpp:737
+msgid ""
+"The DVI-file refers to the TeX-file <strong>%1</strong> "
+"which could not be found."
+msgstr "TeX 文稿 <strong>%1</strong> 的相對應 DVI 檔找不到。"
+
+#: dviRenderer.cpp:740
+msgid "Could Not Find File"
+msgstr "無法找到檔案"
+
+#: dviRenderer.cpp:747
+msgid ""
+"You have not yet specified an editor for inverse search. Please choose your "
+"favorite editor in the <strong>DVI options dialog</strong> "
+"which you will find in the <strong>Settings</strong>-menu."
+msgstr ""
+"您尚未指定編輯器。請由 <strong>設定</strong>-選單 中的 <strong>DVI 選項對話框</strong> 指定您順手的編輯器。"
+
+#: dviRenderer.cpp:752
+msgid "Need to Specify Editor"
+msgstr "需指定編輯器"
+
+#: dviRenderer.cpp:753
+msgid "Use KDE's Editor Kate for Now"
+msgstr "使用 KDE 的 Kate 編輯器"
+
+#: dviRenderer.cpp:785
+msgid ""
+"<qt>The external program"
+"<br>"
+"<br><tt><strong>%1</strong></tt>"
+"<br/>"
+"<br/>which was used to call the editor for inverse search, reported an error. "
+"You might wish to look at the <strong>document info dialog</strong> "
+"which you will find in the File-Menu for a precise error report. The manual for "
+"KDVI contains a detailed explanation how to set up your editor for use with "
+"KDVI, and a list of common problems.</qt>"
+msgstr ""
+"<qt>用來呼叫編輯器的外部程式 "
+"<br>"
+"<br><tt><strong>%1</strong></tt>"
+"<br/>"
+"<br/> 傳回錯誤。您可能需要查看一下 <strong>文件資訊對話框</strong> 的 檔案-選單 來得知詳細的情形。KDVI "
+"的使用手冊有詳細的說明如何設定編輯器及一些其他的問題說明。</qt>"
+
+#: dviRenderer.cpp:791
+msgid "Starting the editor..."
+msgstr "啟動編輯器......"
+
+#: dviRenderer_draw.cpp:269
+msgid "The DVI code set a character of an unknown font."
+msgstr "DVI 碼含不明字型的字元。"
+
+#: dviRenderer_draw.cpp:294 dviRenderer_prescan.cpp:636
+msgid "The DVI code referred to font #%1, which was not previously defined."
+msgstr "DVI 碼所參考的字型 #%1,事先並未被定義。"
+
+#: dviRenderer_draw.cpp:379
+msgid "The stack was not empty when the EOP command was encountered."
+msgstr "EOP 指令出現時,堆疊尚未被清空。"
+
+#: dviRenderer_draw.cpp:391
+msgid "The stack was empty when a POP command was encountered."
+msgstr "POP 指令出現時,堆疊已被清空。"
+
+#: dviRenderer_draw.cpp:515 dviRenderer_draw.cpp:524
+msgid "The DVI code referred to a font which was not previously defined."
+msgstr "DVI 碼所參考的字型,事先並未被定義。"
+
+#: dviRenderer_draw.cpp:564
+msgid "An illegal command was encountered."
+msgstr "出現不合法的指令。"
+
+#: dviRenderer_draw.cpp:569
+msgid "The unknown op-code %1 was encountered."
+msgstr "出現未知的 op-code %1。"
+
+#: dviRenderer_export.cpp:83
+msgid ""
+"KDVI could not locate the program 'dvipdfm' on your computer. That program is "
+"essential for the export function to work. You can, however, convert the "
+"DVI-file to PDF using the print function of KDVI, but that will often produce "
+"documents which print ok, but are of inferior quality if viewed in the Acrobat "
+"Reader. It may be wise to upgrade to a more recent version of your TeX "
+"distribution which includes the 'dvipdfm' program.\n"
+"Hint to the perplexed system administrator: KDVI uses the shell's PATH variable "
+"when looking for programs."
+msgstr ""
+"KDVI 找不到 'dvipdfm' 程式。這個程式是輸出功能所必需。當然也可以由 KDVI 的列印功能來轉換 DVI 為 "
+"PDF,但通常這樣一來印表沒有問題,由 Acrobat Reader 閱覽時則品質較差。更新您的 TeX 系統至含 'dvipdfm' 程式的版本會較明智。\n"
+"給還沒進入狀況的系統管理者:KDVI 使用 shell 的 PATH 環境變數來找程式。"
+
+#: dviRenderer_export.cpp:98
+msgid "*.pdf|Portable Document Format (*.pdf)"
+msgstr "*.pdf|可攜式文件格式 (*.pdf)"
+
+#: dviRenderer_export.cpp:98 dviRenderer_export.cpp:197
+msgid "Export File As"
+msgstr "輸出檔案為"
+
+#: dviRenderer_export.cpp:103 dviRenderer_export.cpp:202
+#: kdvi_multipage.cpp:164
+msgid ""
+"The file %1\n"
+"exists. Do you want to overwrite that file?"
+msgstr "檔案 %1 已存在。要覆寫檔案嗎?"
+
+#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203
+#: kdvi_multipage.cpp:165
+msgid "Overwrite File"
+msgstr "覆寫檔案"
+
+#: dviRenderer_export.cpp:104 kdvi_multipage.cpp:165
+msgid "Overwrite"
+msgstr "覆寫"
+
+#: dviRenderer_export.cpp:111
+msgid "Using dvipdfm to export the file to PDF"
+msgstr "使用 dvipdfm 輸出為 PDF 檔"
+
+#: dviRenderer_export.cpp:113
+msgid ""
+"KDVI is currently using the external program 'dvipdfm' to convert your DVI-file "
+"to PDF. Sometimes that can take a while because dvipdfm needs to generate its "
+"own bitmap fonts Please be patient."
+msgstr ""
+"KDVI 目前使用 'dvipdfm' 外部程式來轉換 DVI 為 PDF 格式。可能會花些時間,因為 dvipdfm 要產生所需的點陣字型,請耐心等候。"
+
+#: dviRenderer_export.cpp:117
+msgid "Waiting for dvipdfm to finish..."
+msgstr "等待 dvipdfm 完成工作......"
+
+#: dviRenderer_export.cpp:118
+msgid "dvipdfm progress dialog"
+msgstr "dvipdfm 進度對話框"
+
+#: dviRenderer_export.cpp:120 dviRenderer_export.cpp:223
+msgid "Please be patient"
+msgstr "請耐心等候"
+
+#: dviRenderer_export.cpp:136
+msgid ""
+"<qt>The external program 'dvipdf', which was used to export the file, reported "
+"an error. You might wish to look at the <strong>document info dialog</strong> "
+"which you will find in the File-Menu for a precise error report.</qt>"
+msgstr ""
+"<qt>'dvipdf' 外部程式是用來輸出 PDF 檔,並報告是否有錯誤。您可以查看 <strong>文件資訊對話框</strong> "
+"的檔案選單來得到更精確的錯誤訊息。</qt>"
+
+#: dviRenderer_export.cpp:139
+msgid "Export: %1 to PDF"
+msgstr "輸出:%1 至 PDF"
+
+#: dviRenderer_export.cpp:180
+msgid ""
+"<qt><P>This DVI file refers to external graphic files which are not in "
+"PostScript format, and cannot be handled by the <strong>dvips</strong> "
+"program that KDVI uses interally to print or to export to PostScript. The "
+"functionality that you require is therefore unavailable in this version of "
+"KDVI.</p>"
+"<p>As a workaround, you can use the <strong>File/Export As</strong>"
+"-Menu to save this file in PDF format, and then use a PDF viewer.</p>"
+"<p>The author of KDVI apologizes for the inconvenience. If enough users "
+"complain, the missing functionality might later be added.</p></qt>"
+msgstr ""
+"<qt>"
+"<p>與這個 DVI 檔關聯的是一個非 PostScript 格式的外部圖形檔,無法經由 <strong>dvips</strong> "
+"處理。因此在這一版的 KDVI 中無法處理您的需求。</p> "
+"<p>您可以用選單中的「檔案」→「輸出為」功能將檔案存成 PDF 格式,再使用 PDF 檢視器讀取。</p> "
+"<p>KDVI 的作者為您的不方便道歉。如果有夠多的使用者都需要此功能,我們會試著加入。</p></qt>"
+
+#: dviRenderer_export.cpp:187
+msgid "Functionality Unavailable"
+msgstr "無法提供此功能"
+
+#: dviRenderer_export.cpp:197
+msgid "*.ps|PostScript (*.ps)"
+msgstr "*.ps|PostScript (*.ps)"
+
+#: dviRenderer_export.cpp:214
+msgid "Using dvips to export the file to PostScript"
+msgstr "使用 dvips 來輸出 PostScript 檔"
+
+#: dviRenderer_export.cpp:216
+msgid ""
+"KDVI is currently using the external program 'dvips' to convert your DVI-file "
+"to PostScript. Sometimes that can take a while because dvips needs to generate "
+"its own bitmap fonts Please be patient."
+msgstr ""
+"KDVI 目前使用 'dvips' 外部程式來轉換 DVI 為 PostScript 格式。可能會花些時間,因為 dvips "
+"要產生所需的點陣字型,請耐心等候。"
+
+#: dviRenderer_export.cpp:220
+msgid "Waiting for dvips to finish..."
+msgstr "等待 dvips 完成工作......"
+
+#: dviRenderer_export.cpp:221
+msgid "dvips progress dialog"
+msgstr "dvips 進度對話框"
+
+#: dviRenderer_export.cpp:299
+msgid ""
+"<qt>The external program 'dvips', which was used to export the file, reported "
+"an error. You might wish to look at the <strong>document info dialog</strong> "
+"which you will find in the File-Menu for a precise error report.</qt>"
+msgstr ""
+"<qt>'dvips' 外部程式是用來輸出 PostScript 檔,並報告是否有錯誤。您可以查看 <strong>文件資訊對話框</strong> "
+"的檔案選單來得到更精確的錯誤訊息。</qt>"
+
+#: dviRenderer_export.cpp:302
+msgid "Export: %1 to PostScript"
+msgstr "輸出:%1 至 PostScript"
+
+#: dviRenderer_prescan.cpp:87
+#, c-format
+msgid "Embedding %1"
+msgstr "嵌入 %1"
+
+#: dviRenderer_prescan.cpp:105
+msgid ""
+"Page %1: The PostScript file <strong>%2</strong> could not be found."
+"<br>"
+msgstr "頁 %1:PostScript 檔案 <strong>%2</strong> 找不到。<br>"
+
+#: dviRenderer_prescan.cpp:255
+msgid "The papersize data '%1' could not be parsed."
+msgstr "紙張大小 '%1' 無法被分析。"
+
+#: dviWidget.cpp:115
+msgid "line %1 of %2"
+msgstr "行 %1/%2"
+
+#: fontpool.cpp:46
+msgid "KDVI is currently generating bitmap fonts..."
+msgstr "KDVI 正在產生點陣字......"
+
+#: fontpool.cpp:47
+msgid "Aborts the font generation. Don't do this."
+msgstr "中止字型產生。不要啦。"
+
+#: fontpool.cpp:48
+msgid ""
+"KDVI is currently generating bitmap fonts which are needed to display your "
+"document. For this, KDVI uses a number of external programs, such as MetaFont. "
+"You can find the output of these programs later in the document info dialog."
+msgstr "KDVI 正在產生點陣字來做為顯示文件用。KDVI 會使用一些外部程式來達到這個目的。您可以由文件資訊對話框得知這些外部程式名稱。"
+
+#: fontpool.cpp:51
+msgid "KDVI is generating fonts. Please wait."
+msgstr "KDVI 正在產生字型。請稍候。"
+
+#: fontpool.cpp:161
+msgid "Could not allocate memory for a font structure!"
+msgstr "此字型結構無法配置足夠的記憶體!"
+
+#: fontpool.cpp:186
+msgid "The fontlist is currently empty."
+msgstr "字型列表是空的。"
+
+#: fontpool.cpp:190
+msgid "TeX Name"
+msgstr "TeX 名稱"
+
+#: fontpool.cpp:191
+msgid "Family"
+msgstr "字族"
+
+#: fontpool.cpp:193
+msgid "Type"
+msgstr "種類"
+
+#: fontpool.cpp:194
+msgid "Encoding"
+msgstr "編碼"
+
+#: fontpool.cpp:195
+msgid "Comment"
+msgstr "註解"
+
+#: fontpool.cpp:208
+msgid "Font file not found"
+msgstr "找不到檔案"
+
+#: fontpool.cpp:284
+msgid ""
+"<qt>"
+"<p>KDVI was not able to locate all the font files which are necessary to "
+"display the current DVI file. Your document might be unreadable.</p></qt>"
+msgstr "<qt> <p>KDVI 無法找到完整的字型來顯示這個 DVI 檔。您的文件有可能沒辦法閱讀。</p></qt>"
+
+#: fontpool.cpp:288
+msgid "Not All Font Files Found"
+msgstr "找不到某些字型"
+
+#: fontpool.cpp:299
+msgid "Locating fonts..."
+msgstr "找尋字型......"
+
+#: fontpool.cpp:358
+msgid ""
+"<p>KDVI relies on the <b>kpsewhich</b> program to locate font files on your "
+"hard disc and to generate PK fonts, if necessary.</p>"
+msgstr "<p>KDVI 使用 <b>kpsewhich</b> 程式來尋找您硬碟中的字型檔,需要時並產生 PK 字型。</p>"
+
+#: fontpool.cpp:361
+msgid ""
+"<p>The shell process for the kpsewhich program could not be started. "
+"Consequently, some font files could not be found, and your document might by "
+"unreadable. If this error is reproducable please report the issue to the KDVI "
+"developers using the 'Help' menu."
+"<p>"
+msgstr ""
+"<p>kpsewhich 程式無法啟動。因此,有些字型檔找不到,您的文件可能無法閱讀。如果可以重現此錯誤,請到「說明」選單中向 KDVI 開發團隊回報。</p>"
+
+#: fontpool.cpp:367 fontpool.cpp:405
+msgid "Problem locating fonts - KDVI"
+msgstr "找不到字型 - KDVI"
+
+#: fontpool.cpp:384
+msgid "Font generation aborted - KDVI"
+msgstr "產生字型時被中斷 - KDVI"
+
+#: fontpool.cpp:394
+msgid ""
+"<p>There were problems running kpsewhich. As a result, some font files could "
+"not be located, and your document might be unreadable.</p>"
+"<p><b>Possible reason:</b> The kpsewhich program is perhaps not installed on "
+"your system, or it cannot be found in the current search path.</p>"
+"<p><b>What you can do:</b> The kpsewhich program is normally contained in "
+"distributions of the TeX typesetting system. If TeX is not installed on your "
+"system, you could install the TeTeX distribution (www.tetex.org). If you are "
+"sure that TeX is installed, please try to use the kpsewhich program from the "
+"command line to check if it really works.</p>"
+msgstr ""
+"<p>執行 kpsewhich 時發生問題。因此,有些字型檔找不到,您的文件可能無法閱讀。</p> "
+"<p><b>可能的原因有</b>:kpsewhich 程式沒有安裝,或不在您的執行路徑上。</p> "
+"<p><b>建議處理方式</b>:kpsewhich 程式通常會跟著 Tex 系統套件一起散佈。如果您沒有安裝 Tex,您可以安裝 TeTex "
+"套件(www.tetex.org)。如果您確定 Tex 已安裝,請試著從命令列執行 kpsewhich,看看是否有問題。</p>"
+
+#: fontpool.cpp:590
+msgid "Currently generating %1 at %2 dpi"
+msgstr "產生 %2 dpi 的 %1"
+
+#: fontprogress.cpp:33
+msgid "Abort"
+msgstr "中止"
+
+#: fontprogress.cpp:37
+msgid "What's going on here?"
+msgstr "這裡是在幹什麼?"
+
+#: fontprogress.cpp:51
+msgid "%v of %m"
+msgstr "%v/%m"
+
+#: infodialog.cpp:25
+msgid "Document Info"
+msgstr "文件資訊"
+
+#: infodialog.cpp:27
+msgid "DVI File"
+msgstr "DVI 檔案"
+
+#: infodialog.cpp:30
+msgid "Information on the currently loaded DVI-file."
+msgstr "目前載入的 DVI 檔資訊。"
+
+#: infodialog.cpp:38
+msgid "Information on currently loaded fonts."
+msgstr "目前載入的字型資訊。"
+
+#: infodialog.cpp:39
+msgid ""
+"This text field shows detailed information about the currently loaded fonts. "
+"This is useful for experts who want to locate problems in the setup of TeX or "
+"KDVI."
+msgstr "這個文字欄位會顯示所載入字型的詳細資訊。這對想解決 TeX 或 KDVI 問題的老手會很有幫助。"
+
+#: infodialog.cpp:43
+msgid "External Programs"
+msgstr "外部程式"
+
+#: infodialog.cpp:46
+msgid "No output from any external program received."
+msgstr "外部程式沒有產生輸出。"
+
+#: infodialog.cpp:47
+msgid "Output of external programs."
+msgstr "外部程式的輸出。"
+
+#: infodialog.cpp:48
+msgid ""
+"KDVI uses external programs, such as MetaFont, dvipdfm or dvips. This text "
+"field shows the output of these programs. That is useful for experts who want "
+"to find problems in the setup of TeX or KDVI."
+msgstr ""
+"KDVI 使用一些外部程式,例如 MetaFont, dvipdfm 或 dvips。這個文字欄位會顯示這些程式的輸出。這對想解決 TeX 或 KDVI "
+"問題的老手會很有幫助。"
+
+#: infodialog.cpp:64
+msgid "There is no DVI file loaded at the moment."
+msgstr "目前尚未載入 DVI 檔。"
+
+#: infodialog.cpp:67
+msgid "Filename"
+msgstr "檔案名稱"
+
+#: infodialog.cpp:71
+msgid "File Size"
+msgstr "檔案大小"
+
+#: infodialog.cpp:73
+msgid "The file does no longer exist."
+msgstr "檔案已不存在。"
+
+#: infodialog.cpp:76
+msgid "#Pages"
+msgstr "#頁碼"
+
+#: infodialog.cpp:77
+msgid "Generator/Date"
+msgstr "產生器/日期"
+
+#: kdvi_multipage.cpp:70
+msgid "Document &Info"
+msgstr "文件資訊 (&I)"
+
+#: kdvi_multipage.cpp:71
+msgid "Embed External PostScript Files..."
+msgstr "嵌入外部 PostScript 檔案......"
+
+#: kdvi_multipage.cpp:72
+msgid "Enable All Warnings && Messages"
+msgstr "開啟所有警告及訊息"
+
+#: kdvi_multipage.cpp:73
+msgid "PostScript..."
+msgstr "PostScript..."
+
+#: kdvi_multipage.cpp:74
+msgid "PDF..."
+msgstr "PDF..."
+
+#: kdvi_multipage.cpp:101 main.cpp:34
+msgid "KDVI"
+msgstr "KDVI"
+
+#: kdvi_multipage.cpp:102 main.cpp:29
+msgid ""
+"A previewer for Device Independent files (DVI files) produced by the TeX "
+"typesetting system."
+msgstr "DVI 檔預覽器,由 Tex 系統套件產生。"
+
+#: kdvi_multipage.cpp:105
+msgid ""
+"This program displays Device Independent (DVI) files which are produced by the "
+"TeX typesetting system.\n"
+"KDVI 1.3 is based on original code from KDVI version 0.43 and xdvik."
+msgstr ""
+"這個程式會顯示 DVI 檔,由 Tex 系統套件產生。\n"
+"KDVI 1.3 是由 KDVI 0.4.3 版與 xdvik 改寫而來。"
+
+#: kdvi_multipage.cpp:109 main.cpp:41
+msgid "Current Maintainer."
+msgstr "目前維護者。"
+
+#: kdvi_multipage.cpp:113 main.cpp:45
+msgid "Author of kdvi 0.4.3"
+msgstr "kdvi 0.4.3 作者"
+
+#: kdvi_multipage.cpp:114 main.cpp:46
+msgid "Maintainer of xdvik"
+msgstr "xdvik 維護者"
+
+#: kdvi_multipage.cpp:115 main.cpp:47
+msgid "Author of xdvi"
+msgstr "xdvi 作者"
+
+#: kdvi_multipage.cpp:116 main.cpp:48
+msgid "Testing and bug reporting."
+msgstr "測試與回報錯誤。"
+
+#: kdvi_multipage.cpp:117 main.cpp:49
+msgid "Re-organisation of source code."
+msgstr "重新組織程式源碼。"
+
+#: kdvi_multipage.cpp:153
+msgid "Save File As"
+msgstr "另存新檔"
+
+#: kdvi_multipage.cpp:196
+msgid "*.dvi *.DVI|TeX Device Independent Files (*.dvi)"
+msgstr "*.dvi *.DVI|TeX DVI檔 (*.dvi)"
+
+#: kdvi_multipage.cpp:208
+msgid "TeX Fonts"
+msgstr "TeX 字型"
+
+#: kdvi_multipage.cpp:209
+msgid "DVI Specials"
+msgstr "DVI 特性"
+
+#: kdvi_multipage.cpp:242
+#, c-format
+msgid "Print %1"
+msgstr "印出 %1"
+
+#: kdvi_multipage.cpp:251
+msgid ""
+"The list of pages you selected was empty.\n"
+"Maybe you made an error in selecting the pages, e.g. by giving an invalid range "
+"like '7-2'."
+msgstr ""
+"您所選的頁數是空的。\n"
+"或許您選頁的操作有誤,例如給了個無效的範圍,如 '7-2'。"
+
+#: kdvi_multipage.cpp:414
+msgid "All messages and warnings will now be shown."
+msgstr "所有訊息及警告將會顯示。"
+
+#: kdvi_multipage.cpp:465
+msgid ""
+"<qt>This function searches the DVI file for plain text. Unfortunately, this "
+"version of KDVI treats only plain ASCII characters properly. Symbols, "
+"ligatures, mathematical formulae, accented characters, and non-English text, "
+"such as Russian or Korean, will most likely be messed up completely. Continue "
+"anyway?</qt>"
+msgstr ""
+"<qt>此功能搜尋 DVI 檔中的純文字內容。很可惜,本版的 KDVI 只能正確處理純 ASCII "
+"字元。符號、連體字、數理式子、重音符號及非英文語系文字,例如俄文或韓文,將會完全變成一團亂。要繼續嗎?</qt>"
+
+#: kdvi_multipage.cpp:469 kdvi_multipage_texthandling.cpp:64
+msgid "Function May Not Work as Expected"
+msgstr "此功能可能不如預期的運作"
+
+#: kdvi_multipage_texthandling.cpp:60
+msgid ""
+"<qt>This function exports the DVI file to a plain text. Unfortunately, this "
+"version of KDVI treats only plain ASCII characters properly. Symbols, "
+"ligatures, mathematical formulae, accented characters, and non-English text, "
+"such as Russian or Korean, will most likely be messed up completely.</qt>"
+msgstr ""
+"<qt>此功能會將 DVI 檔轉為純文字檔。很可惜,本版的 KDVI 只能正確處理純 ASCII "
+"字元。符號、連體字、數理式子、重音符號及非英文語系文字,例如俄文或韓文,將會完全變成一團亂。</qt>"
+
+#: kdvi_multipage_texthandling.cpp:65
+msgid "Continue Anyway"
+msgstr "請繼續"
+
+#: main.cpp:21
+msgid ""
+"Check if the file is loaded in another KDVI.\n"
+"If it is, bring up the other KDVI. Otherwise, load the file."
+msgstr "請檢查是否此檔已被其他 KDVI 實體載入。如果是的話,請叫出該實體,否則請載入檔案。"
+
+#: main.cpp:23
+msgid "Navigate to this page"
+msgstr "導向到此頁"
+
+#: main.cpp:24
+msgid "Files to load"
+msgstr "要載入的檔案"
+
+#: main.cpp:37
+msgid ""
+"This program displays Device Independent (DVI) files which are produced by the "
+"TeX typesetting system.\n"
+"This KDVI version is based on original code from KDVI version 0.43 and xdvik."
+msgstr ""
+"這個程式會顯示 DVI 檔,由 Tex 系統套件產生。\n"
+"KDVI 1.3 是由 KDVI 0.4.3 版與 xdvik 改寫而來。"
+
+#: main.cpp:80
+msgid "The URL %1 is not well-formed."
+msgstr "網址 %1 格式不太正確。"
+
+#: main.cpp:86
+msgid ""
+"The URL %1 does not point to a local file. You can only specify local files if "
+"you are using the '--unique' option."
+msgstr "網址 %1 不是本地端檔案。您使用 --unique 選項時只能指定本地端檔案。"
+
+#: optionDialogFontsWidget.cpp:34
+msgid "This version of KDVI does not support type 1 fonts."
+msgstr "此版的 KDVI 不支援 Type 1 字型。"
+
+#: optionDialogFontsWidget.cpp:35
+msgid ""
+"KDVI needs the FreeType library to access type 1 fonts. This library was not "
+"present when KDVI was compiled. If you want to use type 1 fonts, you must "
+"either install the FreeType library and recompile KDVI yourself, or find a "
+"precompiled software package for your operating system."
+msgstr ""
+"KDVI 需要 FreeType 來存取 type 1 字型。KDVI 編譯時並沒有編入 FreeType。如果您要使用 type 1 字型,您需重編譯 "
+"KDVI,或找尋已編譯好的可執行檔。"
+
+#: optionDialogSpecialWidget.cpp:32
+msgid "User-Defined Editor"
+msgstr "自訂編輯器"
+
+#: optionDialogSpecialWidget.cpp:34
+msgid "Enter the command line below."
+msgstr "以下輸入命令列指令。"
+
+#: optionDialogSpecialWidget.cpp:38
+msgid "Click 'Help' to learn how to set up Emacs."
+msgstr "按 '求助' 鍵來學習如何設定 Emacs。"
+
+#: optionDialogSpecialWidget.cpp:42
+msgid "Kate perfectly supports inverse search."
+msgstr "Kate 支援反向搜尋。"
+
+#: optionDialogSpecialWidget.cpp:46
+msgid "Kile works very well"
+msgstr "Kile 運作良好"
+
+#: optionDialogSpecialWidget.cpp:50
+msgid "NEdit perfectly supports inverse search."
+msgstr "NEdit 支援反向搜尋。"
+
+#: optionDialogSpecialWidget.cpp:54
+msgid "VIM version 6.0 or greater works just fine."
+msgstr "VIM 6.0 以後的版本運作良好。"
+
+#: optionDialogSpecialWidget.cpp:58
+msgid "Click 'Help' to learn how to set up XEmacs."
+msgstr "按 '求助' 鍵來學習如何設定 XEmacs。"
+
+#: psgs.cpp:152
+msgid "Generating PostScript graphics..."
+msgstr "產生 PostScript 圖檔......"
+
+#: psgs.cpp:250
+msgid ""
+"<qt>The version of Ghostview that is installed on this computer does not "
+"contain any of the Ghostview device drivers that are known to KDVI. PostScript "
+"support has therefore been turned off in KDVI.</qt>"
+msgstr ""
+"<qt>安裝在此電腦上的 Ghostview 的版本不含任何 KDVI 能辨識的 Ghostview 裝置驅動程式。PostScript "
+"支援將被關閉。</qt>"
+
+#: psgs.cpp:253
+msgid ""
+"<qt>"
+"<p>The Ghostview program, which KDVI uses internally to display the PostScript "
+"graphics that is included in this DVI file, is generally able to write its "
+"output in a variety of formats. The sub-programs that Ghostview uses for these "
+"tasks are called 'device drivers'; there is one device driver for each format "
+"that Ghostview is able to write. Different versions of Ghostview often have "
+"different sets of device drivers available. It seems that the version of "
+"Ghostview that is installed on this computer does not contain <strong>"
+"any</strong> of the device drivers that are known to KDVI.</p>"
+"<p>It seems unlikely that a regular installation of Ghostview would not contain "
+"these drivers. This error may therefore point to a serious misconfiguration of "
+"the Ghostview installation on your computer.</p>"
+"<p>If you want to fix the problems with Ghostview, you can use the command "
+"<strong>gs --help</strong> to display the list of device drivers contained in "
+"Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' drivers. "
+"Note that KDVI needs to be restarted to re-enable PostScript support.</p></qt>"
+msgstr ""
+"<qt> "
+"<p>KDVI 內部用以顯示此 DVI 檔中的 PostScript 圖形的 GhostView 程式,可以將它的輸出寫程不同的格式。Ghostview "
+"使用的子程式稱為「裝置驅動程式」,每一種輸出格式都有自己的裝置驅動程式,不同版本的 Ghostview 也會提供不同的裝置驅動程式。看起來安裝在此電腦上的 "
+"Ghostview 版本並沒有支援 <strong>任何</strong> KDVI 能辨識的裝置驅動程式。</p> "
+"<p>看起來您安裝的 Ghostview 可能不是很正常。也有可能是 Ghostview 在安裝時設定不正確。</p> "
+"<p>如果您要修正此問題,您可以在命令列下使用 <strong>gs --help</strong> 顯示裝置驅動程式清單。此外 KDVI 還可以使用 "
+"png256、jpeg 與 pnm 驅動程式。注意,KDVI 需要重新啟動才能重新開啟 PostScript 支援。</p></qt>"
+
+#. i18n: file kdvi_part.rc line 6
+#: rc.cpp:6
+#, no-c-format
+msgid "Export As"
+msgstr "輸出為"
+
+#. i18n: file optionDialogFontsWidget_base.ui line 28
+#: rc.cpp:18
+#, no-c-format
+msgid "Use font hinting for Type 1 fonts, if available"
+msgstr "如果存在的話,使用 Type 1 字型提示(hinting)"
+
+#. i18n: file optionDialogFontsWidget_base.ui line 31
+#: rc.cpp:21
+#, no-c-format
+msgid ""
+"You should enable this, if the use of font hinting improves readability on your "
+"machine."
+msgstr "如果字型提示可增進可讀性,那你可以試著開啟此選項。"
+
+#. i18n: file optionDialogFontsWidget_base.ui line 34
+#: rc.cpp:24
+#, no-c-format
+msgid ""
+"Many modern fonts contain \"font hinting\" information which can be used to "
+"improve the appearance of a font on low-resolution displays, such as a computer "
+"monitor, or a notebook screen. However, many people find the \"improved\" fonts "
+"quite ugly and prefer to have this option disabled."
+msgstr ""
+"目前的許多字型都含有 \"字型提示\" (font hinting)資訊,這在低解析度的螢幕可增進可讀性。但有不少朋友發現這種 \"改進\" "
+"很醜,這時可能需要把這個選項關掉。"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 27
+#: rc.cpp:27
+#, no-c-format
+msgid "Show PostScript specials"
+msgstr "顯示特殊 PostScript"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 30
+#: rc.cpp:30
+#, no-c-format
+msgid "If in doubt, enable this option."
+msgstr "如果不知道要不要打開,就打開此選項吧!"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 33
+#: rc.cpp:33 rc.cpp:83
+#, no-c-format
+msgid ""
+"Some DVI files contain PostScript graphics. If enabled, KDVI will use the "
+"Ghostview PostScript interpreter to display these. You probably want to enable "
+"this option, unless you have a DVI-file whose PostScript part is broken, or too "
+"large for your machine."
+msgstr ""
+"有些 DVI 檔含有 PostScript 圖形。如果打開這個功能,KDVI 會使用 ghostview 的 PostScript "
+"解譯器來顯示這些圖形。您可能得打開這個功能,除非您的 DVI 檔的 PostScript 圖形毀損,或圖形太大您的系統無法處理。"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 41
+#: rc.cpp:36
+#, no-c-format
+msgid "Editor for Inverse Search"
+msgstr "反向搜尋用編輯器"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 60
+#: rc.cpp:39
+#, no-c-format
+msgid "Choose an editor which is used in inverse search."
+msgstr "選擇一個反向搜尋時用的編輯器。"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 64
+#: rc.cpp:42
+#, no-c-format
+msgid ""
+"<p>Some DVI files contain 'inverse search' information. If such a DVI file is "
+"loaded, you can right-click into KDVI and an editor will open, load the TeX "
+"file and jump to the correct position. You can select your favorite editor "
+"here. If in doubt, 'nedit' is usually a good choice.</p>\n"
+"<p>Check the KDVI manual to see how to prepare DVI files which support the "
+"inverse search.</p>"
+msgstr ""
+"<p>有些 DVI 檔含有反向搜尋的資訊。如果載入此種 DVI 檔,您可以按滑鼠右鍵來打開編輯器,載入 TeX "
+"文稿,並跳至相對應的位置。在此您可以選擇自己喜愛的編輯器。如果有疑問,'nedit' 常是好的選擇。</p>\n"
+"<p>查閱 KDVI 的使用手冊,如何讓有反向搜尋的 DVI 檔作用。</p>"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 80
+#: rc.cpp:46
+#, no-c-format
+msgid "Description:"
+msgstr "描述:"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 96
+#: rc.cpp:49
+#, no-c-format
+msgid "Shell command:"
+msgstr "命令列指令:"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 115
+#: rc.cpp:52
+#, no-c-format
+msgid ""
+"Explains about the editor's capabilities in conjunction with inverse search."
+msgstr "說明編輯器對反向搜尋結合的能力。"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 119
+#: rc.cpp:55
+#, no-c-format
+msgid ""
+"<p>Not all editors are well suited for inverse search. For instance, many "
+"editors have no command like 'If the file is not yet loaded, load it. "
+"Otherwise, bring the window with the file to the front'. If you are using an "
+"editor like this, clicking into the DVI file will always open a new editor, "
+"even if the TeX file is already open. Likewise, many editors have no command "
+"line argument that would allow KDVI to specify the exact line which you wish to "
+"edit.</p>\n"
+"<p>If you feel that KDVI's support for a certain editor is inadequate, please "
+"write to kebekus@kde.org.</p>"
+msgstr ""
+"<p>並非所有編輯器都適合做反向搜尋。例如,許多編輯器並無「若檔案尚未載入則載入檔案,否則將檔案視窗移至前景」的功能。如果您的編輯器沒有此功能,在 DVI "
+"檔按一下滑鼠,即使 TeX 已經打開,還是會開啟一個新的編輯器。此外,有許多編輯器並無命令列參數供 KDVI 去指定特定行。</p>\n"
+"<p>如果您覺得 KDVI 對某些編輯器支援不完整,請寫信給 kebekus@kde.org。</p>"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 135
+#: rc.cpp:59
+#, no-c-format
+msgid "Shell-command line used to start the editor."
+msgstr "開啟編輯器的命令列指令。"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 138
+#: rc.cpp:62
+#, no-c-format
+msgid ""
+"If you are using inverse search, KDVI uses this command line to start the "
+"editor. The field '%f' is replaced with the filename, and '%l' is replaced with "
+"the line number."
+msgstr "如果您使用反向搜尋,KDVI 使用這個命令列去啟動編輯器。'%f' 欄位會被檔名取代,而且 '%l' 會被行數取代。"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 154
+#: rc.cpp:65
+#, no-c-format
+msgid "Editor:"
+msgstr "編輯器:"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 170
+#: rc.cpp:68
+#, no-c-format
+msgid "What is 'inverse search'? "
+msgstr "什麼是 '反向搜尋'?"
+
+#. i18n: file optionDialogSpecialWidget_base.ui line 176
+#: rc.cpp:71
+#, no-c-format
+msgid "inv-search"
+msgstr "反向搜尋"
+
+#. i18n: file kdvi.kcfg line 10
+#: rc.cpp:74
+#, no-c-format
+msgid ""
+"Use MetaFont to generate missing fonts. If in doubt, enable this option."
+msgstr "使用 MetaFont 來產生找不到的字型。如果不知道要不要打開,就打開吧。"
+
+#. i18n: file kdvi.kcfg line 11
+#: rc.cpp:77
+#, no-c-format
+msgid ""
+"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very "
+"specific reason, you probably want to enable this option."
+msgstr "允許 KDVI 使用 MetaFont 來產生點陣字。除非您有很特殊的理由,否則您最好是打開。"
+
+#. i18n: file kdvi.kcfg line 15
+#: rc.cpp:80
+#, no-c-format
+msgid "Show PostScript specials. If in doubt, enable this option."
+msgstr "顯示 PostScript 特性。如果您不知道要不要打開,就打開吧。"
+
+#. i18n: file kdvi.kcfg line 20
+#: rc.cpp:86
+#, no-c-format
+msgid ""
+"Use font hinting. You should enable this, if the use of font hinting improves "
+"readability on your machine."
+msgstr "使用字型提示(font hinting)。如果使用字型提示可增進可讀性,那你可以試試看。"
+
+#. i18n: file kdvi.kcfg line 21
+#: rc.cpp:89
+#, no-c-format
+msgid ""
+"Many modern fonts contain &quot;font hinting&quot; information which can be "
+"used to improve the appearance of a font on low-resolution displays, such as a "
+"computer monitor, or a notebook screen. However, many people find the "
+"&quot;improved&quot; fonts quite ugly and prefer to have this option disabled."
+msgstr ""
+"目前的許多字型都含有「字型提示」(font "
+"hinting)資訊,這在低解析度的螢幕可增進可讀性。但有不少朋友發現這種「改進」很醜,這時可能需要把這個選項關掉。"
+
+#: special.cpp:39
+msgid "That makes 25 errors. Further error messages will not be printed."
+msgstr "已產生 25 個錯誤,進一步的錯誤訊息將不再顯示。"
+
+#: special.cpp:224
+msgid ""
+"Error in DVIfile '%1', page %2. Color pop command issued when the color stack "
+"is empty."
+msgstr "DVI 檔 '%1',頁 %2 錯誤。顏色堆疊錯誤。"
+
+#: special.cpp:309
+msgid ""
+"Malformed parameter in the epsf special command.\n"
+"Expected a float to follow %1 in %2"
+msgstr ""
+"在 epsf 特殊命令中有錯誤參數。\n"
+"在 %2 中應該跟隨 %1"
+
+#: special.cpp:435
+#, c-format
+msgid ""
+"File not found: \n"
+" %1"
+msgstr ""
+"找不到檔案:\n"
+"%1"
+
+#: special.cpp:702
+msgid ""
+"Error in DVIfile '%1', page %2. Could not interpret angle in text rotation "
+"special."
+msgstr "DVI 檔 '%1',第 %2 頁錯誤。無法解譯文字旋轉的角度。"
+
+#: special.cpp:725
+msgid "The special command '%1' is not implemented."
+msgstr "特殊命令 '%1' 尚未實作。"
+
+#: tips.cpp:3
+msgid ""
+"<p>...that KDVI can also load compressed DVI-files? \n"
+msgstr ""
+"<p>......KDVI 可以載入壓縮過的 DVI 檔嗎?\n"
+
+#: tips.cpp:8
+msgid ""
+"<p>...that you can mark text with the right mouse button and paste it\n"
+"into any application?\n"
+msgstr ""
+"<p>......您可以使用滑鼠右鍵使文字內容反白,並貼\n"
+"至其他的應用軟體中?\n"
+
+#: tips.cpp:14
+msgid ""
+"<p>...that KDVI now supports inverse search? You can click into your DVI file \n"
+"with the middle mouse button and your editor opens, loads the TeX file, and\n"
+"jumps to the proper line! <a href=\"help:/kdvi/inverse-search.html\">The \n"
+"manual explains how to set up your editor for this.</a> \n"
+msgstr ""
+"<p>......KDVI 支援往後搜尋?您可以在 DVI 檔上\n"
+"按滑鼠中鍵,會打開您使用的編輯器,並載入 TeX 文稿,\n"
+"並跳至相對的編輯行!<a href=\"help:/kdvi/inverse-search.html\"> \n"
+"使用手冊會說明如何設定編輯器達成此種功能。</a> \n"
+
+#: tips.cpp:22
+msgid ""
+"<p>...that KDVI supports forward search? If you use Emacs or XEmacs, you can \n"
+"jump directly from the TeX file to the associated place in the DVI file. \n"
+"<a href=\"help:/kdvi/forward-search.html\">The manual explains how to set up \n"
+"your editor for this.</a> \n"
+msgstr ""
+"<p>......KDVI 支援往前搜尋?如果您使用 Emacs 或 XEmacs,您可以\n"
+"直接跳至 TeX 文稿相對應的 DVI 檔所在。\n"
+"<a href=\"help:/kdvi/forward-search.html\"> 使用手冊會說明如何\n"
+"設定編輯器達成此種功能。</a> \n"
+
+#: tips.cpp:30
+msgid ""
+"<p>...that KDVI now offers full text search? \n"
+msgstr ""
+"<p>......KDVI 可以全文搜尋?\n"
+
+#: tips.cpp:35
+msgid ""
+"<p>...that KDVI can save your DVI file as PostScript, PDF, and even plain text? "
+"\n"
+msgstr ""
+"<p>......KDVI 可以把 DVI 檔存成 PostScript,PDF 甚至純文字檔?\n"
+
+#: util.cpp:73
+msgid "Fatal Error! "
+msgstr "致命錯誤!!"
+
+#: util.cpp:76
+msgid ""
+"Fatal error.\n"
+"\n"
+msgstr ""
+"致命錯誤。\n"
+"\n"
+
+#: util.cpp:78
+msgid ""
+"\n"
+"\n"
+"This probably means that either you found a bug in KDVI,\n"
+"or that the DVI file, or auxiliary files (such as font files, \n"
+"or virtual font files) were really badly broken.\n"
+"KDVI will abort after this message. If you believe that you \n"
+"found a bug, or that KDVI should behave better in this situation\n"
+"please report the problem."
+msgstr ""
+"\n"
+"\n"
+"這可能表示您找到了 KDVI 中的臭蟲,,\n"
+"或這個 DVI 檔與輔助檔案 (如字型檔,\n"
+"或虛擬字型檔) 嚴重損壞。\n"
+"KDVI 會在這個訊息後中止。如果您確定\n"
+"您找到了臭蟲,或 KDVI 應該有更好的處理\n"
+"請回報這個問題。"
+
+#: vf.cpp:86
+msgid "Checksum mismatch"
+msgstr "檢查值不符"
+
+#: vf.cpp:87
+msgid " in font file "
+msgstr " 在字型檔案"
+
+#: vf.cpp:132
+msgid "Could not allocate memory for a macro table."
+msgstr "此巨集無法配置記憶體。"
+
+#: vf.cpp:149
+msgid "Virtual character "
+msgstr "虛擬字元"
+
+#: vf.cpp:149
+msgid " in font "
+msgstr " 在字型"
+
+#: vf.cpp:150
+msgid " ignored."
+msgstr " 忽略"
+
+#: vf.cpp:180
+#, c-format
+msgid "Wrong command byte found in VF macro list: %1"
+msgstr "在 VF 巨集列表中找到錯誤的命令位元組: %1"