summaryrefslogtreecommitdiffstats
path: root/tde-i18n-zh_TW/messages/tdemultimedia/krec.po
diff options
context:
space:
mode:
Diffstat (limited to 'tde-i18n-zh_TW/messages/tdemultimedia/krec.po')
-rw-r--r--tde-i18n-zh_TW/messages/tdemultimedia/krec.po578
1 files changed, 578 insertions, 0 deletions
diff --git a/tde-i18n-zh_TW/messages/tdemultimedia/krec.po b/tde-i18n-zh_TW/messages/tdemultimedia/krec.po
new file mode 100644
index 00000000000..79e1f2493f9
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdemultimedia/krec.po
@@ -0,0 +1,578 @@
+# translation of krec.po to Traditional Chinese
+# traditional Chinese translation fot krec.
+# Copyright (C) 2002, 2006 Free Software Foundation, Inc.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+# Tse-Chun Ho <saviro.tw@yahoo.com.tw>, 2002.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: krec\n"
+"POT-Creation-Date: 2006-08-20 04:11+0200\n"
+"PO-Revision-Date: 2006-02-21 13:12+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#: mp3_export/krecexport_mp3.cpp:34
+msgid "Unknown encoding error."
+msgstr "未知的編碼錯誤。"
+
+#: mp3_export/krecexport_mp3.cpp:35
+msgid "Buffer was too small."
+msgstr "暫存器太小。"
+
+#: mp3_export/krecexport_mp3.cpp:36
+msgid "Memory allocation problem."
+msgstr "配置記憶體錯誤。"
+
+#: mp3_export/krecexport_mp3.cpp:37
+msgid "Parameter initialisation not performed."
+msgstr "參數未初始化。"
+
+#: mp3_export/krecexport_mp3.cpp:38
+msgid "Psycho acoustic problems."
+msgstr "Psycho acoustic 問題。"
+
+#: mp3_export/krecexport_mp3.cpp:39
+msgid "OGG cleanup encoding error."
+msgstr "OGG 清除編碼錯誤。"
+
+#: mp3_export/krecexport_mp3.cpp:40
+msgid "OGG frame encoding error"
+msgstr "OGG frame 編碼錯誤"
+
+#: mp3_export/krecexport_mp3.cpp:78
+msgid "At this time MP3-Export only supports files in stereo and 16bit."
+msgstr "目前 MP3 匯出只支援立體聲與十六位元音效檔。"
+
+#: mp3_export/krecexport_mp3.cpp:83
+msgid ""
+"Please note that this plugin takes its qualitysettings from the corresponding "
+"section of the Audio CDs Control Center module configuration. Make use of the "
+"Control Center to configure these settings."
+msgstr "請注意,這個外掛程式是從 Audio CD 控制中心模組設定中取得音效的品質設定。請到控制中心去設定這些值。"
+
+#: mp3_export/krecexport_mp3.cpp:87 ogg_export/krecexport_ogg.cpp:78
+msgid "Quality Configuration"
+msgstr "品質設定"
+
+#: mp3_export/krecexport_mp3.cpp:127 mp3_export/krecexport_mp3.cpp:144
+msgid "MP3 encoding error."
+msgstr "MP3 編碼錯誤。"
+
+#: ogg_export/krecexport_ogg.cpp:69
+msgid ""
+"At this time OGG-export only supports files in 44kHz samplingrate, 16bit and 2 "
+"channels."
+msgstr "此時 OGG 匯出只支援取樣頻率為 44 千赫,十六位元及雙聲道的檔案。"
+
+#: ogg_export/krecexport_ogg.cpp:75
+msgid ""
+"Please note that this plugin takes its qualitysettings from the corresponding "
+"section of the audiocd:/ configuration. Make use of the Control Center to "
+"configure these settings."
+msgstr "請注意,這個外掛程式是從 audiocd:/ 設定中取得音效的品質設定。請到控制中心去設定這些值。"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Tse-Chun Ho, Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "saviro.tw@yahoo.com.tw, franklin at goodhorse dot idv dot tw"
+
+#: krecconfig_fileswidget.cpp:39
+msgid "Sampling Rate"
+msgstr "取樣頻率"
+
+#: krecconfig_fileswidget.cpp:41
+msgid "48000 Hz"
+msgstr "48000 Hz"
+
+#: krecconfig_fileswidget.cpp:42
+msgid "44100 Hz"
+msgstr "44100 Hz"
+
+#: krecconfig_fileswidget.cpp:43
+msgid "22050 Hz"
+msgstr "22050 Hz"
+
+#: krecconfig_fileswidget.cpp:44
+msgid "11025 Hz"
+msgstr "11025 Hz"
+
+#: krecconfig_fileswidget.cpp:45 krecconfigure.cpp:69 krecconfigure.cpp:72
+msgid "Other"
+msgstr "其他"
+
+#: krecconfig_fileswidget.cpp:48
+msgid "Other:"
+msgstr "其他:"
+
+#: krecconfig_fileswidget.cpp:54
+msgid "Channels"
+msgstr "聲道"
+
+#: krecconfig_fileswidget.cpp:56
+msgid "Stereo (2 channels)"
+msgstr "立體聲(雙聲道)"
+
+#: krecconfig_fileswidget.cpp:57
+msgid "Mono (1 channel)"
+msgstr "Mono(單聲道)"
+
+#: krecconfig_fileswidget.cpp:58
+msgid "Bits"
+msgstr "位元"
+
+#: krecconfig_fileswidget.cpp:60
+msgid "16 bit"
+msgstr "十六位元"
+
+#: krecconfig_fileswidget.cpp:61
+msgid "8 bit"
+msgstr "八位元"
+
+#: krecconfig_fileswidget.cpp:63
+msgid "Use defaults for creating new files"
+msgstr "建立新檔時使用預設值"
+
+#: krecconfigure.cpp:50
+msgid "<qt><b>Timedisplay Related Settings</b></qt>"
+msgstr "<qt><b>時間顯示設定</b></qt>"
+
+#: krecconfigure.cpp:56
+msgid "Timedisplay Style"
+msgstr "時間顯示風格"
+
+#: krecconfigure.cpp:59
+msgid "Plain samples"
+msgstr "平面取樣"
+
+#: krecconfigure.cpp:60
+msgid "[hours:]mins:secs:samples"
+msgstr "[時:]分:秒:取樣頻率"
+
+#: krecconfigure.cpp:61
+msgid "[hours:]mins:secs:frames"
+msgstr "[時:]分:秒:frames"
+
+#: krecconfigure.cpp:62
+msgid "MByte.KByte"
+msgstr "MByte.KByte"
+
+#: krecconfigure.cpp:63
+msgid "Framebase"
+msgstr "Framebase"
+
+#: krecconfigure.cpp:66
+msgid "30 frames per second (American TV)"
+msgstr "每秒 30 個 frame (美式電視,NTSC)"
+
+#: krecconfigure.cpp:67
+msgid "25 frames per second (European TV)"
+msgstr "每秒 25 個 frame (歐式電視,PAL)"
+
+#: krecconfigure.cpp:68
+msgid "75 frames per second (CD)"
+msgstr "每秒 75 個 frame(CD)"
+
+#: krecconfigure.cpp:79
+msgid "Show verbose times ( XXmins:XXsecs:XXframes instead of XX:XX::XX )"
+msgstr "詳細顯示時間(顯示出「分」、「秒」、「frames」等字樣)"
+
+#: krecconfigure.cpp:84
+msgid "<qt><b>Miscellaneous Settings</b></qt>"
+msgstr "<qt><b>其他設定</b></qt>"
+
+#: krecconfigure.cpp:87
+msgid "Show tip of the day at startup"
+msgstr "啟動時顯示今日提示"
+
+#: krecconfigure.cpp:91
+msgid "Enable All Hidden Messages"
+msgstr "將所有隱藏的訊息重新打開"
+
+#: krecconfigure.cpp:94
+msgid ""
+"<qt><i>All messages with the \"Don't show this message again\" option are shown "
+"again after selecting this button.</i></qt>"
+msgstr "<qt><i>將之前所有設定「不要再顯示」的訊息通通解禁。</i></qt>"
+
+#: krecfile.cpp:56
+msgid "Using default properties for the new file"
+msgstr "建新檔時使用預設值"
+
+#: krecfile.cpp:97
+msgid "'%1' loaded."
+msgstr "載入 %1"
+
+#: krecfile.cpp:141
+msgid "No need to save."
+msgstr "不要儲存。"
+
+#: krecfile.cpp:145
+msgid "Saving in progress..."
+msgstr "儲存中..."
+
+#: krecfile.cpp:171
+msgid "Saving \"%1\" was successful."
+msgstr "%1 儲存成功。"
+
+#: krecfile.cpp:281
+msgid "Part deleted."
+msgstr "部份刪除。"
+
+#: krecfile.cpp:432
+msgid "Do you really want to delete the selected part '%1'?"
+msgstr "您確定要刪除選定的部份 %1 嗎?"
+
+#: krecfile.cpp:432
+msgid "Delete Part?"
+msgstr "刪除部份嗎?"
+
+#: krecfileview.cpp:35 krecfileview.cpp:79 krecfileviewhelpers.cpp:227
+#: krecfileviewhelpers.cpp:246
+msgid "<no file>"
+msgstr "<沒有檔案>"
+
+#: krecfileview.cpp:59
+msgid "file with no name"
+msgstr "沒有檔名"
+
+#: krecfileviewhelpers.cpp:141
+msgid "MB"
+msgstr "MB"
+
+#: krecfileviewhelpers.cpp:147
+msgid "kB"
+msgstr "kB"
+
+#: krecfileviewhelpers.cpp:161 krecfileviewhelpers.cpp:188
+msgid "hours"
+msgstr "小時"
+
+#: krecfileviewhelpers.cpp:166 krecfileviewhelpers.cpp:193
+msgid "mins"
+msgstr "分"
+
+#: krecfileviewhelpers.cpp:170 krecfileviewhelpers.cpp:197
+msgid "secs"
+msgstr "秒"
+
+#: krecfileviewhelpers.cpp:174
+msgid "frames"
+msgstr "frames"
+
+#: krecfileviewhelpers.cpp:204 krecfileviewhelpers.cpp:210
+msgid "samples"
+msgstr "samples"
+
+#: krecfileviewhelpers.cpp:219 krecfileviewhelpers.cpp:238
+#, c-format
+msgid "kByte: %1"
+msgstr "kByte: %1"
+
+#: krecfileviewhelpers.cpp:220 krecfileviewhelpers.cpp:239
+#, c-format
+msgid "[h:]m:s.f %1"
+msgstr "[h:]m:s.f %1"
+
+#: krecfileviewhelpers.cpp:221 krecfileviewhelpers.cpp:240
+#, c-format
+msgid "[h:]m:s.s %1"
+msgstr "[h:]m:s.s %1"
+
+#: krecfileviewhelpers.cpp:222 krecfileviewhelpers.cpp:241
+msgid "%1 Samples"
+msgstr "%1 Samples"
+
+#: krecfileviewhelpers.cpp:224
+msgid "Position"
+msgstr "位置"
+
+#: krecfileviewhelpers.cpp:243
+msgid "Size"
+msgstr "大小"
+
+#: krecfileviewhelpers.cpp:258
+#, c-format
+msgid "Position: %1"
+msgstr "位置:%1"
+
+#: krecfileviewhelpers.cpp:261
+#, c-format
+msgid "Size: %1"
+msgstr "大小:%1"
+
+#: krecfilewidgets.cpp:122
+msgid "Toggle Active/Disabled State"
+msgstr "切換狀態"
+
+#: krecfilewidgets.cpp:125
+msgid "Remove This Part"
+msgstr "移除這個部份"
+
+#: krecfilewidgets.cpp:126
+msgid "Change Title of This Part"
+msgstr "變更這部份的標題"
+
+#: krecfilewidgets.cpp:127
+msgid "Change Comment of This Part"
+msgstr "變更這部份的註解"
+
+#: krecfilewidgets.cpp:222
+msgid "Lots of Data"
+msgstr "一堆資料"
+
+#: krecfilewidgets.cpp:304
+msgid "New Title"
+msgstr "新標題"
+
+#: krecfilewidgets.cpp:304
+msgid "Enter new part title:"
+msgstr "輸入新的部份標題:"
+
+#: krecfilewidgets.cpp:309
+msgid "New Comment"
+msgstr "新的註解"
+
+#: krecfilewidgets.cpp:309
+msgid "Enter new part comment:"
+msgstr "輸入新的部份註解:"
+
+#: krecnewproperties.cpp:55
+msgid "Properties for the new File"
+msgstr "新檔案的內容"
+
+#: krecord.cpp:71
+msgid "Recording level"
+msgstr "錄音等級"
+
+#: krecord.cpp:131
+msgid "Save File As"
+msgstr "另存新檔"
+
+#: krecord.cpp:141
+msgid ""
+"The document \"%1\" has been modified.\n"
+"Do you want to save it?"
+msgstr "文件 %1 已變更。您要儲存嗎?"
+
+#: krecord.cpp:172
+msgid "Sorry, an encoding method could not be determined."
+msgstr "抱歉,無法決定編碼方法。"
+
+#: krecord.cpp:173
+msgid ""
+"<qt>This can have several reasons:"
+"<ul>"
+"<li>You did not specify an ending.</li>"
+"<li>You specified an ending but there is no plugin available for this ending. "
+"In both cases be sure to choose an ending of the list presented in the previous "
+"dialog.</li>"
+"<li>The plugin loading mechanism isn't working. If you are sure you did "
+"everything right, please file a bugreport saying what you where about to do and "
+"please quote the following line:<br />%1</li></ul></qt>"
+msgstr ""
+"<qt>這有幾個理由: "
+"<ul> "
+"<li>您沒有指定結束(ending)。</li> "
+"<li>您指定了結束,但沒有此結束的外掛。請確認您已從之前的清單中選取了結束。</li> "
+"<li>外掛載入時有問題。如果您確定您每一步驟都沒有弄錯,請回報錯誤,說明您所做的動作,並加入下一行:<br /> %1 </li></ul></qt>"
+
+#: krecord.cpp:183
+msgid "Could not determine encodingmethod"
+msgstr "無法決定編碼方法"
+
+#: krecord.cpp:185
+msgid "There is nothing to export."
+msgstr "沒有東西可匯出。"
+
+#: krecord.cpp:297
+msgid "Export..."
+msgstr "匯出..."
+
+#: krecord.cpp:300
+msgid "&Record"
+msgstr "錄音(&R)"
+
+#. i18n: file krecui.rc line 8
+#: krecord.cpp:302 rc.cpp:3
+#, no-c-format
+msgid "&Play"
+msgstr "播放(&P)"
+
+#: krecord.cpp:304
+msgid "&Stop"
+msgstr "停止(&S)"
+
+#: krecord.cpp:306
+msgid "Play Through"
+msgstr "從頭至尾播放"
+
+#: krecord.cpp:309
+msgid "Go to &Beginning"
+msgstr "回到開頭(&B)"
+
+#: krecord.cpp:311
+msgid "Go to &End"
+msgstr "跳到結尾(&E)"
+
+#: krecord.cpp:316
+msgid "Start aRts Control Tool"
+msgstr "啟動 aRts 控制工具"
+
+#: krecord.cpp:318
+msgid "Start KMix"
+msgstr "啟動 KMix"
+
+#: krecord.cpp:342
+msgid ""
+"Your system is missing the Synth_STEREO_COMPRESSOR aRts module.\n"
+"You will be able to use KRec but without the great functions of the compressor."
+msgstr ""
+"您的系統沒有 Synth_STEREO_COMPRESSOR aRts 模組。\n"
+"您可以使用 KRec 但是會沒辦法使用壓縮的功能。"
+
+#: krecord.cpp:343
+msgid ""
+"Possible reasons are:\n"
+"- You installed KRec on its own without the rest of tdemultimedia.\n"
+"- You installed everything correctly, but did not restart the aRts daemon\n"
+" and therefore it is not aware of the new effects.\n"
+"- This is a bug."
+msgstr ""
+"可能的理由有:\n"
+" - 您只安裝 KRec 而沒有安裝 tdemultimedia。\n"
+" - 您每個東西都正確安裝了,但是沒有重新啟動 aRts,因此無法讓新的設定生效。\n"
+" - 有錯誤。"
+
+#: krecord.cpp:344
+msgid "Unable to Find Compressor"
+msgstr "找不到壓縮程式"
+
+#: main.cpp:30
+msgid ""
+"This is a recording tool for KDE.\n"
+"It uses aRts, just look at the audiomanager\n"
+"and you will find it there accepting sound\n"
+"for recording."
+msgstr ""
+"這是一個 KDE 的錄音工具。\n"
+"它使用 aRts,只要看看音效管理員,\n"
+"您會發現它已經在那裡準備接收錄音了。"
+
+#: main.cpp:47
+msgid "KRec"
+msgstr "KRec"
+
+#: main.cpp:50
+msgid ""
+"Creator \n"
+"Look at the website www.arnoldarts.de \n"
+"for other good stuff."
+msgstr ""
+"建立者\n"
+"在 www.arnoldarts.de 網站尋找其他的東東。"
+
+#: main.cpp:51
+msgid "Helped where he was asked"
+msgstr "說明他所問之處"
+
+#: main.cpp:52
+msgid "Made some minor improvements"
+msgstr "協助做一些小改進"
+
+#: main.cpp:53
+msgid ""
+"They indirectly wrote the exports. At least I learned from their files and "
+"patches."
+msgstr "他們間接寫出匯出程式。至少是我從他們寫的檔案與補丁學來的。"
+
+#. i18n: file krecui.rc line 35
+#: rc.cpp:9
+#, no-c-format
+msgid "Play"
+msgstr "播放"
+
+#. i18n: file krecui.rc line 43
+#: rc.cpp:12
+#, no-c-format
+msgid "Compressor"
+msgstr "壓縮程式"
+
+#: tips.cpp:3
+msgid ""
+"<h4>...that KRec does non-destructive Recording?</h4>\n"
+"<p>\n"
+"That means if you have a recording and want to record only a part for a second "
+"(third or more) time, your first (and second and later) version is still on "
+"disc and can still be restored. Only for Playback/Export the old version is "
+"overlayed by the newer one.\n"
+"</p>\n"
+msgstr ""
+"<h4>KRec 可以做錄音回覆嗎?</h4>\n"
+"<p>這是指說,如果您已經有一段錄音,然後在其中一部份要錄第二次(或更多次),您第一次錄的音並不會被清掉,隨時可以回復。只有播放/匯出時,舊的錄音會被新的蓋過去"
+"。</p>\n"
+
+#: tips.cpp:11
+msgid ""
+"<h4>...which event caused the first version of KRec?</h4>\n"
+"<p>\n"
+"Some friends of mine asked me whether I could do the recordings for a radioplay "
+"for them. So I was searching for an easy-to-use recording tool running on my "
+"favorite OS. After some searching (without finding something suitable) I "
+"started a first version of KRec.\n"
+"</p>\n"
+msgstr ""
+"<h4>第一版的 KRec 是怎麼來的?</h4> \n"
+"<p>一些朋友問我是不是能錄下收音機裡的音樂。所以我去搜尋在我的作業系統上好用的錄音工具。找了一陣之後,我決定自己來寫第一版的 KRec。</p>\n"
+
+#: tips.cpp:19
+msgid ""
+"<h4>...that developers are very happy to hear from the users?</h4>\n"
+"<p>\n"
+"Most developers are very happy to see their applications used by other people. "
+"So if you want to say \"Thank you\" or you have some problems, don't hesitate "
+"to mail us/me. You can find the email addresses of the author in the "
+"\"Help\"-menu under \"About KRec\".\n"
+"</p>\n"
+msgstr ""
+"<h4>程式開發者總是喜歡從使用者那裡得到回饋。</h4>\n"
+"<p> 大部份的程式開發者都希望他們寫的應用程式能被使用者廣泛使用。所以如果您想向他們說聲「謝謝」,或是您有些問題,請寫信給我們。您可以在「關於 "
+"KRec」的「說明」中找到作者的電子郵件地址。</p>\n"
+
+#: tips.cpp:27
+msgid ""
+"<h4>...that you are invited to report bugs?</h4>\n"
+"<p>\n"
+"Altough a lot of testing is done, our capabilities of catching every possible "
+"event/configuration are limited. So if you find a bug use \"Report Bug\" in the "
+"\"Help\"-menu or go directly to http://bugs.kde.org.\n"
+"</p>\n"
+msgstr ""
+"<h4>您能回報錯誤給我們。</h4>\n"
+"<p> 雖然已經做過很多的測試,但是還是很有限。所以如果您找到問題,請用「說明」中的「報告問題」,或是直接到 http://bugs.kde.org "
+"去回報問題。</p>\n"
+
+#: tips.cpp:35
+msgid ""
+"<h4>...that KRec is far from complete?</h4>\n"
+"<p>\n"
+"So if you have a nice feature you think KRec should incorporate please tell us! "
+"To avoid duplicates and improve productivity please do it via bugs.kde.org or "
+"the bug reporting tools and us wishlist as severity.\n"
+"</p>\n"
+msgstr ""
+"<h4>KRec 還沒完成。</h4>\n"
+"<p> 所以如果您對 KRec 有任何意見與好點子,請告訴我們。要避免與別人回報的意見重複,請透過 bugs.kde.org 或回報錯誤的工具。</p>\n"