diff options
Diffstat (limited to 'experimental/tqtinterface/qt4/src/kernel/tqregion_x11.cpp')
-rw-r--r-- | experimental/tqtinterface/qt4/src/kernel/tqregion_x11.cpp | 2908 |
1 files changed, 2908 insertions, 0 deletions
diff --git a/experimental/tqtinterface/qt4/src/kernel/tqregion_x11.cpp b/experimental/tqtinterface/qt4/src/kernel/tqregion_x11.cpp new file mode 100644 index 000000000..4e573c92d --- /dev/null +++ b/experimental/tqtinterface/qt4/src/kernel/tqregion_x11.cpp @@ -0,0 +1,2908 @@ +/**************************************************************************** +** +** Implementation of TQRegion class for X11 +** +** Created : 940729 +** +** Copyright (C) 2010 Timothy Pearson and (C) 1992-2008 Trolltech ASA. +** +** This file is part of the kernel module of the TQt GUI Toolkit. +** +** This file may be used under the terms of the GNU General +** Public License versions 2.0 or 3.0 as published by the Free +** Software Foundation and appearing in the files LICENSE.GPL2 +** and LICENSE.GPL3 included in the packaging of this file. +** Alternatively you may (at your option) use any later version +** of the GNU General Public License if such license has been +** publicly approved by Trolltech ASA (or its successors, if any) +** and the KDE Free TQt Foundation. +** +** Please review the following information to ensure GNU General +** Public Licensing requirements will be met: +** http://trolltech.com/products/qt/licenses/licensing/opensource/. +** If you are unsure which license is appropriate for your use, please +** review the following information: +** http://trolltech.com/products/qt/licenses/licensing/licensingoverview +** or contact the sales department at sales@trolltech.com. +** +** This file may be used under the terms of the Q Public License as +** defined by Trolltech ASA and appearing in the file LICENSE.TQPL +** included in the packaging of this file. Licensees holding valid TQt +** Commercial licenses may use this file in accordance with the TQt +** Commercial License Agreement provided with the Software. +** +** This file is provided "AS IS" with NO WARRANTY OF ANY KIND, +** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted +** herein. +** +**********************************************************************/ + +#include "tqregion.h" +#include "tqpointarray.h" +#include "tqbuffer.h" +#include "tqimage.h" +#include "tqbitmap.h" +#include "tqt_x11_p.h" + +#include <stdlib.h> + +#ifdef USE_QT4 + +#else // USE_QT4 + +// inline TQRect::setCoords +inline void qt_setCoords( TQRect *r, int xp1, int yp1, int xp2, int yp2 ) +{ +#ifdef USE_QT4 + r->setCoords((TQCOORD)xp1, (TQCOORD)yp1, (TQCOORD)xp2, (TQCOORD)yp2); +#else // USE_QT4 + r->x1 = (TQCOORD)xp1; + r->y1 = (TQCOORD)yp1; + r->x2 = (TQCOORD)xp2; + r->y2 = (TQCOORD)yp2; +#endif // USE_QT4 +} + +/* + * clip region + */ + +struct TQRegionPrivate { + int numRects; + TQMemArray<TQRect> rects; + TQRect extents; + + TQRegionPrivate() { numRects = 0; } + TQRegionPrivate( const TQRect &r ) : rects(1) { + numRects = 1; + rects[0] = r; + extents = r; + } + + TQRegionPrivate( const TQRegionPrivate &r ) { + rects = r.rects.copy(); + numRects = r.numRects; + extents = r.extents; + } + + TQRegionPrivate &operator=( const TQRegionPrivate &r ) { + rects = r.rects.copy(); + numRects = r.numRects; + extents = r.extents; + return *this; + } + +}; + + +static void UnionRegion(TQRegionPrivate *reg1, TQRegionPrivate *reg2, TQRegionPrivate *newReg); +static void IntersectRegion(TQRegionPrivate *reg1, TQRegionPrivate *reg2, register TQRegionPrivate *newReg); +static void miRegionOp(register TQRegionPrivate *newReg, TQRegionPrivate *reg1, TQRegionPrivate *reg2, + void (*overlapFunc)(...), + void (*nonOverlap1Func)(...), + void (*nonOverlap2Func)(...)); +#define RectangleOut 0 +#define RectangleIn 1 +#define RectanglePart 2 +#define EvenOddRule 0 +#define WindingRule 1 + +// START OF region.h extract +/* $XConsortium: region.h,v 11.14 94/04/17 20:22:20 rws Exp $ */ +/************************************************************************ + +Copyright (c) 1987 X Consortium + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the X Consortium shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from the X Consortium. + + +Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Digital not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSETQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + +************************************************************************/ + +#ifndef _XREGION_H +#define _XREGION_H + +#include <limits.h> + +#ifndef MAX +#define MAX(a,b) (((a) > (b)) ? (a) : (b)) +#endif +#ifndef MIN +#define MIN(a,b) (((a) < (b)) ? (a) : (b)) +#endif + + +/* 1 if two BOXs overlap. + * 0 if two BOXs do not overlap. + * Remember, x2 and y2 are not in the region + */ +#define EXTENTCHECK(r1, r2) \ + ((r1)->right() >= (r2)->left() && \ + (r1)->left() <= (r2)->right() && \ + (r1)->bottom() >= (r2)->top() && \ + (r1)->top() <= (r2)->bottom()) + +/* + * update region extents + */ +#define EXTENTS(r,idRect){\ + if((r)->left() < (idRect)->extents.left())\ + (idRect)->extents.setLeft( (r)->left() );\ + if((r)->top() < (idRect)->extents.top())\ + (idRect)->extents.setTop( (r)->top() );\ + if((r)->right() > (idRect)->extents.right())\ + (idRect)->extents.setRight( (r)->right() );\ + if((r)->bottom() > (idRect)->extents.bottom())\ + (idRect)->extents.setBottom( (r)->bottom() );\ + } + +/* + * Check to see if there is enough memory in the present region. + */ +#define MEMCHECK(reg, rect, firstrect){\ + if ((reg)->numRects >= (int)((reg)->rects.size()-1)){\ + firstrect.resize(firstrect.size() * 2); \ + (rect) = (firstrect).data() + (reg)->numRects;\ + }\ + } + + +#define EMPTY_REGION(pReg) pReg->numRects = 0 + +#define REGION_NOT_EMPTY(pReg) pReg->numRects + +/* + * number of points to buffer before sending them off + * to scanlines() : Must be an even number + */ +#define NUMPTSTOBUFFER 200 + +/* + * used to allocate buffers for points and link + * the buffers together + */ +typedef struct _POINTBLOCK { + TQPoint pts[NUMPTSTOBUFFER]; + struct _POINTBLOCK *next; +} POINTBLOCK; + +#endif +// END OF region.h extract + +// START OF Region.c extract +/* $XConsortium: Region.c /main/30 1996/10/22 14:21:24 kaleb $ */ +/************************************************************************ + +Copyright (c) 1987, 1988 X Consortium + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the X Consortium shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from the X Consortium. + + +Copyright 1987, 1988 by Digital Equipment Corporation, Maynard, Massachusetts. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Digital not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSETQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + +************************************************************************/ +/* + * The functions in this file implement the Region abstraction, similar to one + * used in the X11 sample server. A Region is simply an area, as the name + * implies, and is implemented as a "y-x-banded" array of rectangles. To + * explain: Each Region is made up of a certain number of rectangles sorted + * by y coordinate first, and then by x coordinate. + * + * Furthermore, the rectangles are banded such that every rectangle with a + * given upper-left y coordinate (y1) will have the same lower-right y + * coordinate (y2) and vice versa. If a rectangle has scanlines in a band, it + * will span the entire vertical distance of the band. This means that some + * areas that could be merged into a taller rectangle will be represented as + * several shorter rectangles to account for shorter rectangles to its left + * or right but within its "vertical scope". + * + * An added constraint on the rectangles is that they must cover as much + * horizontal area as possible. E.g. no two rectangles in a band are allowed + * to touch. + * + * Whenever possible, bands will be merged together to cover a greater vertical + * distance (and thus reduce the number of rectangles). Two bands can be merged + * only if the bottom of one touches the top of the other and they have + * rectangles in the same places (of the same width, of course). This maintains + * the y-x-banding that's so nice to have... + */ +/* $XFree86: xc/lib/X11/Region.c,v 1.1.1.2.2.2 1998/10/04 15:22:50 hohndel Exp $ */ + +typedef void (*voidProcp)(...); + + +static +void UnionRectWithRegion(register const TQRect *rect, TQRegionPrivate *source, TQRegionPrivate *dest) +{ + TQRegionPrivate region; + + if (!rect->width() || !rect->height()) + return; + region.rects.resize(1); + region.numRects = 1; + region.rects[0] = *rect; + region.extents = *rect; + + UnionRegion(®ion, source, dest); + return; +} + +/*- + *----------------------------------------------------------------------- + * miSetExtents -- + * Reset the extents of a region to what they should be. Called by + * miSubtract and miIntersect b/c they can't figure it out along the + * way or do so easily, as miUnion can. + * + * Results: + * None. + * + * Side Effects: + * The region's 'extents' structure is overwritten. + * + *----------------------------------------------------------------------- + */ +static void +miSetExtents (TQRegionPrivate *pReg) +{ + register TQRect *pBox, + *pBoxEnd, + *pExtents; + + if (pReg->numRects == 0) + { + qt_setCoords(&pReg->extents, 0, 0, 0, 0); + return; + } + + pExtents = &pReg->extents; + pBox = pReg->rects.data(); + pBoxEnd = &pBox[pReg->numRects - 1]; + + /* + * Since pBox is the first rectangle in the region, it must have the + * smallest y1 and since pBoxEnd is the last rectangle in the region, + * it must have the largest y2, because of banding. Initialize x1 and + * x2 from pBox and pBoxEnd, resp., as good things to initialize them + * to... + */ + pExtents->setLeft( pBox->left() ); + pExtents->setTop( pBox->top() ); + pExtents->setRight( pBoxEnd->right() ); + pExtents->setBottom( pBoxEnd->bottom() ); + + TQ_ASSERT(pExtents->top() <= pExtents->bottom()); + while (pBox <= pBoxEnd) + { + if (pBox->left() < pExtents->left()) + { + pExtents->setLeft( pBox->left() ); + } + if (pBox->right() > pExtents->right()) + { + pExtents->setRight( pBox->right() ); + } + pBox++; + } + TQ_ASSERT(pExtents->left() <= pExtents->right()); +} + + +/* TranslateRegion(pRegion, x, y) + translates in place + added by raymond +*/ + +static +int +OffsetRegion(register TQRegionPrivate *pRegion, register int x, register int y) +{ + register int nbox; + register TQRect *pbox; + + pbox = pRegion->rects.data(); + nbox = pRegion->numRects; + + while(nbox--) + { + pbox->moveBy(x, y); + pbox++; + } + pRegion->extents.moveBy(x, y); + return 1; +} + +/*====================================================================== + * Region Intersection + *====================================================================*/ +/*- + *----------------------------------------------------------------------- + * miIntersectO -- + * Handle an overlapping band for miIntersect. + * + * Results: + * None. + * + * Side Effects: + * Rectangles may be added to the region. + * + *----------------------------------------------------------------------- + */ +/* static void*/ +static +int +miIntersectO (register TQRegionPrivate *pReg, register TQRect *r1, TQRect *r1End, + register TQRect *r2, TQRect *r2End, int y1, int y2) +{ + register int x1; + register int x2; + register TQRect *pNextRect; + + pNextRect = pReg->rects.data() + pReg->numRects; + + while ((r1 != r1End) && (r2 != r2End)) + { + x1 = TQMAX(r1->left(),r2->left()); + x2 = TQMIN(r1->right(),r2->right()); + + /* + * If there's any overlap between the two rectangles, add that + * overlap to the new region. + * There's no need to check for subsumption because the only way + * such a need could arise is if some region has two rectangles + * right next to each other. Since that should never happen... + */ + if (x1 <= x2) + { + TQ_ASSERT(y1<=y2); + + MEMCHECK(pReg, pNextRect, pReg->rects) + qt_setCoords( pNextRect, x1, y1, x2, y2 ); + pReg->numRects++; + pNextRect++; + } + + /* + * Need to advance the pointers. Shift the one that extends + * to the right the least, since the other still has a chance to + * overlap with that region's next rectangle, if you see what I mean. + */ + if (r1->right() < r2->right()) + { + r1++; + } + else if (r2->right() < r1->right()) + { + r2++; + } + else + { + r1++; + r2++; + } + } + return 0; /* lint */ +} + +static +void +IntersectRegion(TQRegionPrivate *reg1, TQRegionPrivate *reg2, register TQRegionPrivate *newReg) +{ + /* check for trivial reject */ + if ( (!(reg1->numRects)) || (!(reg2->numRects)) || + (!EXTENTCHECK(®1->extents, ®2->extents))) + newReg->numRects = 0; + else + miRegionOp (newReg, reg1, reg2, + (voidProcp) miIntersectO, (voidProcp) NULL, (voidProcp) NULL); + + /* + * Can't alter newReg's extents before we call miRegionOp because + * it might be one of the source regions and miRegionOp depends + * on the extents of those regions being the same. Besides, this + * way there's no checking against rectangles that will be nuked + * due to coalescing, so we have to examine fewer rectangles. + */ + miSetExtents(newReg); + return; +} + +/*====================================================================== + * Generic Region Operator + *====================================================================*/ + +/*- + *----------------------------------------------------------------------- + * miCoalesce -- + * Attempt to merge the boxes in the current band with those in the + * previous one. Used only by miRegionOp. + * + * Results: + * The new index for the previous band. + * + * Side Effects: + * If coalescing takes place: + * - rectangles in the previous band will have their y2 fields + * altered. + * - pReg->numRects will be decreased. + * + *----------------------------------------------------------------------- + */ +/* static int*/ +static +int +miCoalesce (register TQRegionPrivate *pReg, int prevStart, int curStart) + //Region pReg; /* Region to coalesce */ + //prevStart; /* Index of start of previous band */ + //curStart; /* Index of start of current band */ +{ + register TQRect *pPrevBox; /* Current box in previous band */ + register TQRect *pCurBox; /* Current box in current band */ + register TQRect *pRegEnd; /* End of region */ + int curNumRects; /* Number of rectangles in current + * band */ + int prevNumRects; /* Number of rectangles in previous + * band */ + int bandY1; /* Y1 coordinate for current band */ + + pRegEnd = pReg->rects.data() + pReg->numRects; + + pPrevBox = pReg->rects.data() + prevStart; + prevNumRects = curStart - prevStart; + + /* + * Figure out how many rectangles are in the current band. Have to do + * this because multiple bands could have been added in miRegionOp + * at the end when one region has been exhausted. + */ + pCurBox = pReg->rects.data() + curStart; + bandY1 = pCurBox->top(); + for (curNumRects = 0; + (pCurBox != pRegEnd) && (pCurBox->top() == bandY1); + curNumRects++) + { + pCurBox++; + } + + if (pCurBox != pRegEnd) + { + /* + * If more than one band was added, we have to tqfind the start + * of the last band added so the next coalescing job can start + * at the right place... (given when multiple bands are added, + * this may be pointless -- see above). + */ + pRegEnd--; + while ((pRegEnd-1)->top() == pRegEnd->top()) + { + pRegEnd--; + } + curStart = pRegEnd - pReg->rects.data(); + pRegEnd = pReg->rects.data() + pReg->numRects; + } + + if ((curNumRects == prevNumRects) && (curNumRects != 0)) { + pCurBox -= curNumRects; + /* + * The bands may only be coalesced if the bottom of the previous + * matches the top scanline of the current. + */ + if (pPrevBox->bottom() == pCurBox->top() - 1) + { + /* + * Make sure the bands have boxes in the same places. This + * assumes that boxes have been added in such a way that they + * cover the most area possible. I.e. two boxes in a band must + * have some horizontal space between them. + */ + do + { + if ((pPrevBox->left() != pCurBox->left()) || + (pPrevBox->right() != pCurBox->right())) + { + /* + * The bands don't line up so they can't be coalesced. + */ + return (curStart); + } + pPrevBox++; + pCurBox++; + prevNumRects -= 1; + } while (prevNumRects != 0); + + pReg->numRects -= curNumRects; + pCurBox -= curNumRects; + pPrevBox -= curNumRects; + + /* + * The bands may be merged, so set the bottom y of each box + * in the previous band to that of the corresponding box in + * the current band. + */ + do + { + pPrevBox->setBottom( pCurBox->bottom() ); + pPrevBox++; + pCurBox++; + curNumRects -= 1; + } while (curNumRects != 0); + + /* + * If only one band was added to the region, we have to backup + * curStart to the start of the previous band. + * + * If more than one band was added to the region, copy the + * other bands down. The assumption here is that the other bands + * came from the same region as the current one and no further + * coalescing can be done on them since it's all been done + * already... curStart is already in the right place. + */ + if (pCurBox == pRegEnd) + { + curStart = prevStart; + } + else + { + do + { + *pPrevBox++ = *pCurBox++; + } while (pCurBox != pRegEnd); + } + + } + } + return (curStart); +} + +/*- + *----------------------------------------------------------------------- + * miRegionOp -- + * Apply an operation to two regions. Called by miUnion, miInverse, + * miSubtract, miIntersect... + * + * Results: + * None. + * + * Side Effects: + * The new region is overwritten. + * + * Notes: + * The idea behind this function is to view the two regions as sets. + * Together they cover a rectangle of area that this function divides + * into horizontal bands where points are covered only by one region + * or by both. For the first case, the nonOverlapFunc is called with + * each the band and the band's upper and lower extents. For the + * second, the overlapFunc is called to process the entire band. It + * is responsible for clipping the rectangles in the band, though + * this function provides the boundaries. + * At the end of each band, the new region is coalesced, if possible, + * to reduce the number of rectangles in the region. + * + *----------------------------------------------------------------------- + */ +/* static void*/ +static void +miRegionOp(register TQRegionPrivate *newReg, TQRegionPrivate *reg1, TQRegionPrivate *reg2, + void (*overlapFunc)(...), + void (*nonOverlap1Func)(...), + void (*nonOverlap2Func)(...)) + //register Region newReg; /* Place to store result */ + //Region reg1; /* First region in operation */ + //Region reg2; /* 2d region in operation */ + //void (*overlapFunc)(); /* Function to call for over- + //* lapping bands */ + //void (*nonOverlap1Func)(); /* Function to call for non- + //* overlapping bands in region + //* 1 */ + //void (*nonOverlap2Func)(); /* Function to call for non- + //* overlapping bands in region + //* 2 */ +{ + register TQRect *r1; /* Pointer into first region */ + register TQRect *r2; /* Pointer into 2d region */ + TQRect *r1End; /* End of 1st region */ + TQRect *r2End; /* End of 2d region */ + register int ybot; /* Bottom of intersection */ + register int ytop; /* Top of intersection */ + int prevBand; /* Index of start of + * previous band in newReg */ + int curBand; /* Index of start of current + * band in newReg */ + register TQRect *r1BandEnd; /* End of current band in r1 */ + register TQRect *r2BandEnd; /* End of current band in r2 */ + int top; /* Top of non-overlapping + * band */ + int bot; /* Bottom of non-overlapping + * band */ + + /* + * Initialization: + * set r1, r2, r1End and r2End appropriately, preserve the important + * parts of the destination region until the end in case it's one of + * the two source regions, then mark the "new" region empty, allocating + * another array of rectangles for it to use. + */ + r1 = reg1->rects.data(); + r2 = reg2->rects.data(); + r1End = r1 + reg1->numRects; + r2End = r2 + reg2->numRects; + + TQMemArray<TQRect> oldRects = newReg->rects; + + newReg->rects.detach(); + EMPTY_REGION(newReg); + + /* + * Allocate a reasonable number of rectangles for the new region. The idea + * is to allocate enough so the individual functions don't need to + * reallocate and copy the array, which is time consuming, yet we don't + * have to worry about using too much memory. I hope to be able to + * nuke the realloc() at the end of this function eventually. + */ + newReg->rects.resize( TQMAX(reg1->numRects,reg2->numRects) * 2 ); + + /* + * Initialize ybot and ytop. + * In the upcoming loop, ybot and ytop serve different functions depending + * on whether the band being handled is an overlapping or non-overlapping + * band. + * In the case of a non-overlapping band (only one of the regions + * has points in the band), ybot is the bottom of the most recent + * intersection and thus clips the top of the rectangles in that band. + * ytop is the top of the next intersection between the two regions and + * serves to clip the bottom of the rectangles in the current band. + * For an overlapping band (where the two regions intersect), ytop clips + * the top of the rectangles of both regions and ybot clips the bottoms. + */ + if (reg1->extents.top() < reg2->extents.top()) + ybot = reg1->extents.top() - 1; + else + ybot = reg2->extents.top() - 1; + + /* + * prevBand serves to mark the start of the previous band so rectangles + * can be coalesced into larger rectangles. qv. miCoalesce, above. + * In the beginning, there is no previous band, so prevBand == curBand + * (curBand is set later on, of course, but the first band will always + * start at index 0). prevBand and curBand must be indices because of + * the possible expansion, and resultant moving, of the new region's + * array of rectangles. + */ + prevBand = 0; + + do + { + curBand = newReg->numRects; + + /* + * This algorithm proceeds one source-band (as opposed to a + * destination band, which is determined by where the two regions + * intersect) at a time. r1BandEnd and r2BandEnd serve to mark the + * rectangle after the last one in the current band for their + * respective regions. + */ + r1BandEnd = r1; + while ((r1BandEnd != r1End) && (r1BandEnd->top() == r1->top())) + { + r1BandEnd++; + } + + r2BandEnd = r2; + while ((r2BandEnd != r2End) && (r2BandEnd->top() == r2->top())) + { + r2BandEnd++; + } + + /* + * First handle the band that doesn't intersect, if any. + * + * Note that attention is restricted to one band in the + * non-intersecting region at once, so if a region has n + * bands between the current position and the next place it overlaps + * the other, this entire loop will be passed through n times. + */ + if (r1->top() < r2->top()) + { + top = TQMAX(r1->top(),ybot+1); + bot = TQMIN(r1->bottom(),r2->top()-1); + + if ((nonOverlap1Func != (voidProcp)NULL) && bot >= top) + { + (* nonOverlap1Func) (newReg, r1, r1BandEnd, top, bot); + } + + ytop = r2->top(); + } + else if (r2->top() < r1->top()) + { + top = TQMAX(r2->top(),ybot+1); + bot = TQMIN(r2->bottom(),r1->top()-1); + + if ((nonOverlap2Func != (voidProcp)NULL) && bot >= top) + { + (* nonOverlap2Func) (newReg, r2, r2BandEnd, top, bot); + } + + ytop = r1->top(); + } + else + { + ytop = r1->top(); + } + + /* + * If any rectangles got added to the region, try and coalesce them + * with rectangles from the previous band. Note we could just do + * this test in miCoalesce, but some machines incur a not + * inconsiderable cost for function calls, so... + */ + if (newReg->numRects != curBand) + { + prevBand = miCoalesce (newReg, prevBand, curBand); + } + + /* + * Now see if we've hit an intersecting band. The two bands only + * intersect if ybot >= ytop + */ + ybot = TQMIN(r1->bottom(), r2->bottom()); + curBand = newReg->numRects; + if (ybot >= ytop) + { + (* overlapFunc) (newReg, r1, r1BandEnd, r2, r2BandEnd, ytop, ybot); + + } + + if (newReg->numRects != curBand) + { + prevBand = miCoalesce (newReg, prevBand, curBand); + } + + /* + * If we've finished with a band (y2 == ybot) we skip forward + * in the region to the next band. + */ + if (r1->bottom() == ybot) + { + r1 = r1BandEnd; + } + if (r2->bottom() == ybot) + { + r2 = r2BandEnd; + } + } while ((r1 != r1End) && (r2 != r2End)); + + /* + * Deal with whichever region still has rectangles left. + */ + curBand = newReg->numRects; + if (r1 != r1End) + { + if (nonOverlap1Func != (voidProcp)NULL) + { + do + { + r1BandEnd = r1; + while ((r1BandEnd < r1End) && (r1BandEnd->top() == r1->top())) + { + r1BandEnd++; + } + (* nonOverlap1Func) (newReg, r1, r1BandEnd, + TQMAX(r1->top(),ybot+1), r1->bottom()); + r1 = r1BandEnd; + } while (r1 != r1End); + } + } + else if ((r2 != r2End) && (nonOverlap2Func != (voidProcp)NULL)) + { + do + { + r2BandEnd = r2; + while ((r2BandEnd < r2End) && (r2BandEnd->top() == r2->top())) + { + r2BandEnd++; + } + (* nonOverlap2Func) (newReg, r2, r2BandEnd, + TQMAX(r2->top(),ybot+1), r2->bottom()); + r2 = r2BandEnd; + } while (r2 != r2End); + } + + if (newReg->numRects != curBand) + { + (void) miCoalesce (newReg, prevBand, curBand); + } + + /* + * A bit of cleanup. To keep regions from growing without bound, + * we shrink the array of rectangles to match the new number of + * rectangles in the region. This never goes to 0, however... + * + * Only do this stuff if the number of rectangles allocated is more than + * twice the number of rectangles in the region (a simple optimization...). + */ + if (newReg->numRects < (int)(newReg->rects.size() >> 1)) + { + if (REGION_NOT_EMPTY(newReg)) + { + newReg->rects.resize(newReg->numRects); + } + else + { + /* + * No point in doing the extra work involved in an realloc if + * the region is empty + */ + newReg->rects.resize(1); + } + } + return; +} + + +/*====================================================================== + * Region Union + *====================================================================*/ + +/*- + *----------------------------------------------------------------------- + * miUnionNonO -- + * Handle a non-overlapping band for the union operation. Just + * Adds the rectangles into the region. Doesn't have to check for + * subsumption or anything. + * + * Results: + * None. + * + * Side Effects: + * pReg->numRects is incremented and the final rectangles overwritten + * with the rectangles we're passed. + * + *----------------------------------------------------------------------- + */ +/* static void*/ +static +int +miUnionNonO (register TQRegionPrivate *pReg, register TQRect * r, + TQRect * rEnd, register int y1, register int y2) +{ + register TQRect * pNextRect; + + pNextRect = pReg->rects.data() + pReg->numRects; + + TQ_ASSERT(y1 <= y2); + + while (r != rEnd) + { + TQ_ASSERT(r->left() <= r->right()); + MEMCHECK(pReg, pNextRect, pReg->rects) + qt_setCoords( pNextRect, r->left(), y1, r->right(), y2 ); + pReg->numRects++; + pNextRect++; + + r++; + } + return 0; /* lint */ +} + + +/*- + *----------------------------------------------------------------------- + * miUnionO -- + * Handle an overlapping band for the union operation. Picks the + * left-most rectangle each time and merges it into the region. + * + * Results: + * None. + * + * Side Effects: + * Rectangles are overwritten in pReg->rects and pReg->numRects will + * be changed. + * + *----------------------------------------------------------------------- + */ + +/* static void*/ +static +int +miUnionO (register TQRegionPrivate *pReg, register TQRect *r1, TQRect *r1End, + register TQRect *r2, TQRect *r2End, register int y1, register int y2) +{ + register TQRect *pNextRect; + + pNextRect = pReg->rects.data() + pReg->numRects; + +#define MERGERECT(r) \ + if ((pReg->numRects != 0) && \ + (pNextRect[-1].top() == y1) && \ + (pNextRect[-1].bottom() == y2) && \ + (pNextRect[-1].right() >= r->left()-1)) { \ + if (pNextRect[-1].right() < r->right()) { \ + pNextRect[-1].setRight( r->right() ); \ + TQ_ASSERT(pNextRect[-1].left() <= pNextRect[-1].right()); \ + } \ + } else { \ + MEMCHECK(pReg, pNextRect, pReg->rects) \ + qt_setCoords( pNextRect, r->left(), y1, r->right(), y2 ); \ + pReg->numRects++; \ + pNextRect++; \ + } \ + r++; + + TQ_ASSERT (y1<=y2); + while ((r1 != r1End) && (r2 != r2End)) { + if (r1->left() < r2->left()) { + MERGERECT(r1) + } else { + MERGERECT(r2) + } + } + + if (r1 != r1End) + { + do + { + MERGERECT(r1) + } while (r1 != r1End); + } + else while (r2 != r2End) + { + MERGERECT(r2) + } + return 0; /* lint */ +} + +static void UnionRegion(TQRegionPrivate *reg1, TQRegionPrivate *reg2, TQRegionPrivate *newReg) +{ + /* checks all the simple cases */ + + /* + * Region 1 and 2 are the same or region 1 is empty + */ + if ( (reg1 == reg2) || (!(reg1->numRects)) ) + { + *newReg = *reg2; + return; + } + + /* + * if nothing to union (region 2 empty) + */ + if (!(reg2->numRects)) + { + *newReg = *reg1; + return; + } + + /* + * Region 1 completely subsumes region 2 + */ + if ((reg1->numRects == 1) && + (reg1->extents.left() <= reg2->extents.left()) && + (reg1->extents.top() <= reg2->extents.top()) && + (reg1->extents.right() >= reg2->extents.right()) && + (reg1->extents.bottom() >= reg2->extents.bottom())) + { + *newReg = *reg1; + return; + } + + /* + * Region 2 completely subsumes region 1 + */ + if ((reg2->numRects == 1) && + (reg2->extents.left() <= reg1->extents.left()) && + (reg2->extents.top() <= reg1->extents.top()) && + (reg2->extents.right() >= reg1->extents.right()) && + (reg2->extents.bottom() >= reg1->extents.bottom())) + { + *newReg = *reg2; + return; + } + + miRegionOp (newReg, reg1, reg2, (voidProcp) miUnionO, + (voidProcp) miUnionNonO, (voidProcp) miUnionNonO); + + qt_setCoords( &newReg->extents, + TQMIN(reg1->extents.left(), reg2->extents.left()), + TQMIN(reg1->extents.top(), reg2->extents.top()), + TQMAX(reg1->extents.right(), reg2->extents.right()), + TQMAX(reg1->extents.bottom(), reg2->extents.bottom()) ); + + return; +} + +/*====================================================================== + * Region Subtraction + *====================================================================*/ + +/*- + *----------------------------------------------------------------------- + * miSubtractNonO -- + * Deal with non-overlapping band for subtraction. Any parts from + * region 2 we discard. Anything from region 1 we add to the region. + * + * Results: + * None. + * + * Side Effects: + * pReg may be affected. + * + *----------------------------------------------------------------------- + */ +/* static void*/ +static +int +miSubtractNonO1 (register TQRegionPrivate *pReg, register TQRect *r, + TQRect *rEnd, register int y1, register int y2) +{ + register TQRect *pNextRect; + + pNextRect = pReg->rects.data() + pReg->numRects; + + TQ_ASSERT(y1<=y2); + + while (r != rEnd) + { + TQ_ASSERT(r->left()<=r->right()); + MEMCHECK(pReg, pNextRect, pReg->rects) + qt_setCoords( pNextRect, r->left(), y1, r->right(), y2 ); + pReg->numRects++; + pNextRect++; + + r++; + } + return 0; /* lint */ +} + +/*- + *----------------------------------------------------------------------- + * miSubtractO -- + * Overlapping band subtraction. x1 is the left-most point not yet + * checked. + * + * Results: + * None. + * + * Side Effects: + * pReg may have rectangles added to it. + * + *----------------------------------------------------------------------- + */ +/* static void*/ +static +int +miSubtractO (register TQRegionPrivate *pReg, register TQRect *r1, TQRect *r1End, + register TQRect *r2, TQRect *r2End, register int y1, register int y2) +{ + register TQRect *pNextRect; + register int x1; + + x1 = r1->left(); + + TQ_ASSERT(y1<=y2); + pNextRect = pReg->rects.data() + pReg->numRects; + + while ((r1 != r1End) && (r2 != r2End)) + { + if (r2->right() < x1) + { + /* + * Subtrahend missed the boat: go to next subtrahend. + */ + r2++; + } + else if (r2->left() <= x1) + { + /* + * Subtrahend precedes minuend: nuke left edge of minuend. + */ + x1 = r2->right()+1; + if (x1 > r1->right()) + { + /* + * Minuend completely covered: advance to next minuend and + * reset left fence to edge of new minuend. + */ + r1++; + if (r1 != r1End) + x1 = r1->left(); + } + else + { + /* + * Subtrahend now used up since it doesn't extend beyond + * minuend + */ + r2++; + } + } + else if (r2->left() <= r1->right()) + { + /* + * Left part of subtrahend covers part of minuend: add uncovered + * part of minuend to region and skip to next subtrahend. + */ + TQ_ASSERT(x1<r2->left()); + MEMCHECK(pReg, pNextRect, pReg->rects) + qt_setCoords( pNextRect, x1, y1, r2->left() - 1, y2 ); + pReg->numRects++; + pNextRect++; + + x1 = r2->right() + 1; + if (x1 > r1->right()) + { + /* + * Minuend used up: advance to new... + */ + r1++; + if (r1 != r1End) + x1 = r1->left(); + } + else + { + /* + * Subtrahend used up + */ + r2++; + } + } + else + { + /* + * Minuend used up: add any remaining piece before advancing. + */ + if (r1->right() >= x1) + { + MEMCHECK(pReg, pNextRect, pReg->rects) + qt_setCoords( pNextRect, x1, y1, r1->right(), y2 ); + pReg->numRects++; + pNextRect++; + } + r1++; + if ( r1 != r1End ) + x1 = r1->left(); + } + } + + /* + * Add remaining minuend rectangles to region. + */ + while (r1 != r1End) + { + TQ_ASSERT(x1<=r1->right()); + MEMCHECK(pReg, pNextRect, pReg->rects) + qt_setCoords( pNextRect, x1, y1, r1->right(), y2 ); + pReg->numRects++; + pNextRect++; + + r1++; + if (r1 != r1End) + { + x1 = r1->left(); + } + } + return 0; /* lint */ +} + +/*- + *----------------------------------------------------------------------- + * miSubtract -- + * Subtract regS from regM and leave the result in regD. + * S stands for subtrahend, M for minuend and D for difference. + * + * Side Effects: + * regD is overwritten. + * + *----------------------------------------------------------------------- + */ + +static void SubtractRegion(TQRegionPrivate *regM, TQRegionPrivate *regS, register TQRegionPrivate *regD) +{ + /* check for trivial reject */ + if ( (!(regM->numRects)) || (!(regS->numRects)) || + (!EXTENTCHECK(®M->extents, ®S->extents)) ) + { + *regD = *regM; + return; + } + + miRegionOp (regD, regM, regS, (voidProcp) miSubtractO, + (voidProcp) miSubtractNonO1, (voidProcp) NULL); + + /* + * Can't alter newReg's extents before we call miRegionOp because + * it might be one of the source regions and miRegionOp depends + * on the extents of those regions being the unaltered. Besides, this + * way there's no checking against rectangles that will be nuked + * due to coalescing, so we have to examine fewer rectangles. + */ + miSetExtents (regD); +} + +static void XorRegion( TQRegionPrivate *sra, TQRegionPrivate *srb, TQRegionPrivate *dr ) +{ + TQRegionPrivate tra, trb; + + SubtractRegion(sra,srb,&tra); + SubtractRegion(srb,sra,&trb); + UnionRegion(&tra,&trb,dr); +} + +/* + * Check to see if two regions are equal + */ +static bool EqualRegion( TQRegionPrivate *r1, TQRegionPrivate *r2 ) +{ + int i; + + if( r1->numRects != r2->numRects ) return FALSE; + else if( r1->numRects == 0 ) return TRUE; + else if ( r1->extents.left() != r2->extents.left() || + r1->extents.right() != r2->extents.right() || + r1->extents.top() != r2->extents.top() || + r1->extents.bottom() != r2->extents.bottom() ) + return FALSE; + else { + TQRect *rr1 = r1->rects.data(); + TQRect *rr2 = r2->rects.data(); + for( i=0; i < r1->numRects; i++, rr1++, rr2++ ) { + if ( rr1->left() != rr2->left() || + rr1->right() != rr2->right() || + rr1->top() != rr2->top() || + rr1->bottom() != rr2->bottom() ) + return FALSE; + } + } + return TRUE; +} + +static bool PointInRegion( TQRegionPrivate *pRegion, int x, int y ) +{ + int i; + + if (pRegion->numRects == 0) + return FALSE; + if (!pRegion->extents.contains(x, y)) + return FALSE; + for (i=0; i<pRegion->numRects; i++) + { + if (pRegion->rects[i].contains(x, y)) + return TRUE; + } + return FALSE; +} + +static bool RectInRegion(register TQRegionPrivate *region, + int rx, int ry, unsigned int rwidth, unsigned int rheight) +{ + register TQRect *pbox; + register TQRect *pboxEnd; + TQRect rect(rx, ry, rwidth, rheight); + register TQRect *prect = ▭ + int partIn, partOut; + + /* this is (just) a useful optimization */ + if ((region->numRects == 0) || !EXTENTCHECK(®ion->extents, prect)) + return(RectangleOut); + + partOut = FALSE; + partIn = FALSE; + + /* can stop when both partOut and partIn are TRUE, or we reach prect->y2 */ + for (pbox = region->rects.data(), pboxEnd = pbox + region->numRects; + pbox < pboxEnd; + pbox++) + { + + if (pbox->bottom() < ry) + continue; /* getting up to speed or skipping remainder of band */ + + if (pbox->top() > ry) + { + partOut = TRUE; /* missed part of rectangle above */ + if (partIn || (pbox->top() > prect->bottom())) + break; + ry = pbox->top(); /* x guaranteed to be == prect->x1 */ + } + + if (pbox->right() < rx) + continue; /* not far enough over yet */ + + if (pbox->left() > rx) + { + partOut = TRUE; /* missed part of rectangle to left */ + if (partIn) + break; + } + + if (pbox->left() <= prect->right()) + { + partIn = TRUE; /* definitely overlap */ + if (partOut) + break; + } + + if (pbox->right() >= prect->right()) + { + ry = pbox->bottom() + 1; /* finished with this band */ + if (ry > prect->bottom()) + break; + rx = prect->left(); /* reset x out to left again */ + } else + { + /* + * Because boxes in a band are maximal width, if the first box + * to overlap the rectangle doesn't completely cover it in that + * band, the rectangle must be partially out, since some of it + * will be uncovered in that band. partIn will have been set true + * by now... + */ + break; + } + + } + + return(partIn ? ((ry <= prect->bottom()) ? RectanglePart : RectangleIn) : + RectangleOut); +} +// END OF Region.c extract +// START OF poly.h extract +/* $XConsortium: poly.h,v 1.4 94/04/17 20:22:19 rws Exp $ */ +/************************************************************************ + +Copyright (c) 1987 X Consortium + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the X Consortium shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from the X Consortium. + + +Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Digital not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSETQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + +************************************************************************/ + +/* + * This file tqcontains a few macros to help track + * the edge of a filled object. The object is assumed + * to be filled in scanline order, and thus the + * algorithm used is an extension of Bresenham's line + * drawing algorithm which assumes that y is always the + * major axis. + * Since these pieces of code are the same for any filled tqshape, + * it is more convenient to gather the library in one + * place, but since these pieces of code are also in + * the inner loops of output primitives, procedure call + * overhead is out of the question. + * See the author for a derivation if needed. + */ + + +/* + * In scan converting polygons, we want to choose those pixels + * which are inside the polygon. Thus, we add .5 to the starting + * x coordinate for both left and right edges. Now we choose the + * first pixel which is inside the pgon for the left edge and the + * first pixel which is outside the pgon for the right edge. + * Draw the left pixel, but not the right. + * + * How to add .5 to the starting x coordinate: + * If the edge is moving to the right, then subtract dy from the + * error term from the general form of the algorithm. + * If the edge is moving to the left, then add dy to the error term. + * + * The reason for the difference between edges moving to the left + * and edges moving to the right is simple: If an edge is moving + * to the right, then we want the algorithm to flip immediately. + * If it is moving to the left, then we don't want it to flip until + * we traverse an entire pixel. + */ +#define BRESINITPGON(dy, x1, x2, xStart, d, m, m1, incr1, incr2) { \ + int dx; /* local storage */ \ +\ + /* \ + * if the edge is horizontal, then it is ignored \ + * and assumed not to be processed. Otherwise, do this stuff. \ + */ \ + if ((dy) != 0) { \ + xStart = (x1); \ + dx = (x2) - xStart; \ + if (dx < 0) { \ + m = dx / (dy); \ + m1 = m - 1; \ + incr1 = -2 * dx + 2 * (dy) * m1; \ + incr2 = -2 * dx + 2 * (dy) * m; \ + d = 2 * m * (dy) - 2 * dx - 2 * (dy); \ + } else { \ + m = dx / (dy); \ + m1 = m + 1; \ + incr1 = 2 * dx - 2 * (dy) * m1; \ + incr2 = 2 * dx - 2 * (dy) * m; \ + d = -2 * m * (dy) + 2 * dx; \ + } \ + } \ +} + +#define BRESINCRPGON(d, minval, m, m1, incr1, incr2) { \ + if (m1 > 0) { \ + if (d > 0) { \ + minval += m1; \ + d += incr1; \ + } \ + else { \ + minval += m; \ + d += incr2; \ + } \ + } else {\ + if (d >= 0) { \ + minval += m1; \ + d += incr1; \ + } \ + else { \ + minval += m; \ + d += incr2; \ + } \ + } \ +} + + +/* + * This structure tqcontains all of the information needed + * to run the bresenham algorithm. + * The variables may be hardcoded into the declarations + * instead of using this structure to make use of + * register declarations. + */ +typedef struct { + int minor_axis; /* minor axis */ + int d; /* decision variable */ + int m, m1; /* slope and slope+1 */ + int incr1, incr2; /* error increments */ +} BRESINFO; + + +#define BRESINITPGONSTRUCT(dmaj, min1, min2, bres) \ + BRESINITPGON(dmaj, min1, min2, bres.minor_axis, bres.d, \ + bres.m, bres.m1, bres.incr1, bres.incr2) + +#define BRESINCRPGONSTRUCT(bres) \ + BRESINCRPGON(bres.d, bres.minor_axis, bres.m, bres.m1, bres.incr1, bres.incr2) + + + +/* + * These are the data structures needed to scan + * convert regions. Two different scan conversion + * methods are available -- the even-odd method, and + * the winding number method. + * The even-odd rule states that a point is inside + * the polygon if a ray drawn from that point in any + * direction will pass through an odd number of + * path segments. + * By the winding number rule, a point is decided + * to be inside the polygon if a ray drawn from that + * point in any direction passes through a different + * number of clockwise and counter-clockwise path + * segments. + * + * These data structures are adapted somewhat from + * the algorithm in (Foley/Van Dam) for scan converting + * polygons. + * The basic algorithm is to start at the top (smallest y) + * of the polygon, stepping down to the bottom of + * the polygon by incrementing the y coordinate. We + * keep a list of edges which the current scanline crosses, + * sorted by x. This list is called the Active Edge Table (AET) + * As we change the y-coordinate, we update each entry in + * in the active edge table to reflect the edges new xcoord. + * This list must be sorted at each scanline in case + * two edges intersect. + * We also keep a data structure known as the Edge Table (ET), + * which keeps track of all the edges which the current + * scanline has not yet reached. The ET is basically a + * list of ScanLineList structures containing a list of + * edges which are entered at a given scanline. There is one + * ScanLineList per scanline at which an edge is entered. + * When we enter a new edge, we move it from the ET to the AET. + * + * From the AET, we can implement the even-odd rule as in + * (Foley/Van Dam). + * The winding number rule is a little trickier. We also + * keep the EdgeTableEntries in the AET linked by the + * nextWETE (winding EdgeTableEntry) link. This allows + * the edges to be linked just as before for updating + * purposes, but only uses the edges linked by the nextWETE + * link as edges representing spans of the polygon to + * drawn (as with the even-odd rule). + */ + +/* + * for the winding number rule + */ +#define CLOCKWISE 1 +#define COUNTERCLOCKWISE -1 + +typedef struct _EdgeTableEntry { + int ymax; /* ycoord at which we exit this edge. */ + BRESINFO bres; /* Bresenham info to run the edge */ + struct _EdgeTableEntry *next; /* next in the list */ + struct _EdgeTableEntry *back; /* for insertion sort */ + struct _EdgeTableEntry *nextWETE; /* for winding num rule */ + int ClockWise; /* flag for winding number rule */ +} EdgeTableEntry; + + +typedef struct _ScanLineList{ + int scanline; /* the scanline represented */ + EdgeTableEntry *edgelist; /* header node */ + struct _ScanLineList *next; /* next in the list */ +} ScanLineList; + + +typedef struct { + int ymax; /* ymax for the polygon */ + int ymin; /* ymin for the polygon */ + ScanLineList scanlines; /* header node */ +} EdgeTable; + + +/* + * Here is a struct to help with storage allocation + * so we can allocate a big chunk at a time, and then take + * pieces from this heap when we need to. + */ +#define SLLSPERBLOCK 25 + +typedef struct _ScanLineListBlock { + ScanLineList SLLs[SLLSPERBLOCK]; + struct _ScanLineListBlock *next; +} ScanLineListBlock; + + + +/* + * + * a few macros for the inner loops of the fill code where + * performance considerations don't allow a procedure call. + * + * Evaluate the given edge at the given scanline. + * If the edge has expired, then we leave it and fix up + * the active edge table; otherwise, we increment the + * x value to be ready for the next scanline. + * The winding number rule is in effect, so we must notify + * the caller when the edge has been removed so he + * can reorder the Winding Active Edge Table. + */ +#define EVALUATEEDGEWINDING(pAET, pPrevAET, y, fixWAET) { \ + if (pAET->ymax == y) { /* leaving this edge */ \ + pPrevAET->next = pAET->next; \ + pAET = pPrevAET->next; \ + fixWAET = 1; \ + if (pAET) \ + pAET->back = pPrevAET; \ + } \ + else { \ + BRESINCRPGONSTRUCT(pAET->bres) \ + pPrevAET = pAET; \ + pAET = pAET->next; \ + } \ +} + + +/* + * Evaluate the given edge at the given scanline. + * If the edge has expired, then we leave it and fix up + * the active edge table; otherwise, we increment the + * x value to be ready for the next scanline. + * The even-odd rule is in effect. + */ +#define EVALUATEEDGEEVENODD(pAET, pPrevAET, y) { \ + if (pAET->ymax == y) { /* leaving this edge */ \ + pPrevAET->next = pAET->next; \ + pAET = pPrevAET->next; \ + if (pAET) \ + pAET->back = pPrevAET; \ + } \ + else { \ + BRESINCRPGONSTRUCT(pAET->bres) \ + pPrevAET = pAET; \ + pAET = pAET->next; \ + } \ +} +// END OF poly.h extract +// START OF PolyReg.c extract +/* $XConsortium: PolyReg.c,v 11.23 94/11/17 21:59:37 converse Exp $ */ +/************************************************************************ + +Copyright (c) 1987 X Consortium + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the X Consortium shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from the X Consortium. + + +Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Digital not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSETQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + +************************************************************************/ +/* $XFree86: xc/lib/X11/PolyReg.c,v 1.1.1.2.8.2 1998/10/04 15:22:49 hohndel Exp $ */ + +#define LARGE_COORDINATE 1000000 +#define SMALL_COORDINATE -LARGE_COORDINATE + +/* + * InsertEdgeInET + * + * Insert the given edge into the edge table. + * First we must tqfind the correct bucket in the + * Edge table, then tqfind the right slot in the + * bucket. Finally, we can insert it. + * + */ +static void +InsertEdgeInET(EdgeTable *ET, EdgeTableEntry *ETE, int scanline, + ScanLineListBlock **SLLBlock, int *iSLLBlock) +{ + register EdgeTableEntry *start, *prev; + register ScanLineList *pSLL, *pPrevSLL; + ScanLineListBlock *tmpSLLBlock; + + /* + * tqfind the right bucket to put the edge into + */ + pPrevSLL = &ET->scanlines; + pSLL = pPrevSLL->next; + while (pSLL && (pSLL->scanline < scanline)) + { + pPrevSLL = pSLL; + pSLL = pSLL->next; + } + + /* + * reassign pSLL (pointer to ScanLineList) if necessary + */ + if ((!pSLL) || (pSLL->scanline > scanline)) + { + if (*iSLLBlock > SLLSPERBLOCK-1) + { + tmpSLLBlock = + (ScanLineListBlock *)malloc(sizeof(ScanLineListBlock)); + (*SLLBlock)->next = tmpSLLBlock; + tmpSLLBlock->next = (ScanLineListBlock *)NULL; + *SLLBlock = tmpSLLBlock; + *iSLLBlock = 0; + } + pSLL = &((*SLLBlock)->SLLs[(*iSLLBlock)++]); + + pSLL->next = pPrevSLL->next; + pSLL->edgelist = (EdgeTableEntry *)NULL; + pPrevSLL->next = pSLL; + } + pSLL->scanline = scanline; + + /* + * now insert the edge in the right bucket + */ + prev = (EdgeTableEntry *)NULL; + start = pSLL->edgelist; + while (start && (start->bres.minor_axis < ETE->bres.minor_axis)) + { + prev = start; + start = start->next; + } + ETE->next = start; + + if (prev) + prev->next = ETE; + else + pSLL->edgelist = ETE; +} + +/* + * CreateEdgeTable + * + * This routine creates the edge table for + * scan converting polygons. + * The Edge Table (ET) looks like: + * + * EdgeTable + * -------- + * | ymax | ScanLineLists + * |scanline|-->------------>-------------->... + * -------- |scanline| |scanline| + * |edgelist| |edgelist| + * --------- --------- + * | | + * | | + * V V + * list of ETEs list of ETEs + * + * where ETE is an EdgeTableEntry data structure, + * and there is one ScanLineList per scanline at + * which an edge is initially entered. + * + */ + +static void +CreateETandAET(register int count, register TQPoint *pts, + EdgeTable *ET, EdgeTableEntry *AET, register EdgeTableEntry *pETEs, + ScanLineListBlock *pSLLBlock) +{ + register TQPoint *top, *bottom; + register TQPoint *PrevPt, *CurrPt; + int iSLLBlock = 0; + int dy; + + if (count < 2) return; + + /* + * initialize the Active Edge Table + */ + AET->next = (EdgeTableEntry *)NULL; + AET->back = (EdgeTableEntry *)NULL; + AET->nextWETE = (EdgeTableEntry *)NULL; + AET->bres.minor_axis = SMALL_COORDINATE; + + /* + * initialize the Edge Table. + */ + ET->scanlines.next = (ScanLineList *)NULL; + ET->ymax = SMALL_COORDINATE; + ET->ymin = LARGE_COORDINATE; + pSLLBlock->next = (ScanLineListBlock *)NULL; + + PrevPt = &pts[count-1]; + + /* + * for each vertex in the array of points. + * In this loop we are dealing with two vertices at + * a time -- these make up one edge of the polygon. + */ + while (count--) + { + CurrPt = pts++; + + /* + * tqfind out which point is above and which is below. + */ + if (PrevPt->y() > CurrPt->y() ) + { + bottom = PrevPt, top = CurrPt; + pETEs->ClockWise = 0; + } + else + { + bottom = CurrPt, top = PrevPt; + pETEs->ClockWise = 1; + } + + /* + * don't add horizontal edges to the Edge table. + */ + if ( bottom->y() != top->y() ) + { + pETEs->ymax = bottom->y()-1; /* -1 so we don't get last scanline */ + + /* + * initialize integer edge algorithm + */ + dy = bottom->y() - top->y(); + BRESINITPGONSTRUCT(dy, top->x(), bottom->x(), pETEs->bres) + + InsertEdgeInET(ET, pETEs, top->y(), &pSLLBlock, &iSLLBlock); + + if (PrevPt->y() > ET->ymax) + ET->ymax = PrevPt->y(); + if (PrevPt->y() < ET->ymin) + ET->ymin = PrevPt->y(); + pETEs++; + } + + PrevPt = CurrPt; + } +} + +/* + * loadAET + * + * This routine moves EdgeTableEntries from the + * EdgeTable into the Active Edge Table, + * leaving them sorted by smaller x coordinate. + * + */ + +static void +loadAET(register EdgeTableEntry *AET, register EdgeTableEntry *ETEs) +{ + register EdgeTableEntry *pPrevAET; + register EdgeTableEntry *tmp; + + pPrevAET = AET; + AET = AET->next; + while (ETEs) + { + while (AET && (AET->bres.minor_axis < ETEs->bres.minor_axis)) + { + pPrevAET = AET; + AET = AET->next; + } + tmp = ETEs->next; + ETEs->next = AET; + if (AET) + AET->back = ETEs; + ETEs->back = pPrevAET; + pPrevAET->next = ETEs; + pPrevAET = ETEs; + + ETEs = tmp; + } +} + +/* + * computeWAET + * + * This routine links the AET by the + * nextWETE (winding EdgeTableEntry) link for + * use by the winding number rule. The final + * Active Edge Table (AET) might look something + * like: + * + * AET + * ---------- --------- --------- + * |ymax | |ymax | |ymax | + * | ... | |... | |... | + * |next |->|next |->|next |->... + * |nextWETE| |nextWETE| |nextWETE| + * --------- --------- ^-------- + * | | | + * V-------------------> V---> ... + * + */ +static void +computeWAET(register EdgeTableEntry *AET) +{ + register EdgeTableEntry *pWETE; + register int inside = 1; + register int isInside = 0; + + AET->nextWETE = (EdgeTableEntry *)NULL; + pWETE = AET; + AET = AET->next; + while (AET) + { + if (AET->ClockWise) + isInside++; + else + isInside--; + + if ((!inside && !isInside) || + ( inside && isInside)) + { + pWETE->nextWETE = AET; + pWETE = AET; + inside = !inside; + } + AET = AET->next; + } + pWETE->nextWETE = (EdgeTableEntry *)NULL; +} + +/* + * InsertionSort + * + * Just a simple insertion sort using + * pointers and back pointers to sort the Active + * Edge Table. + * + */ + +static int +InsertionSort(register EdgeTableEntry *AET) +{ + register EdgeTableEntry *pETEchase; + register EdgeTableEntry *pETEinsert; + register EdgeTableEntry *pETEchaseBackTMP; + register int changed = 0; + + AET = AET->next; + while (AET) + { + pETEinsert = AET; + pETEchase = AET; + while (pETEchase->back->bres.minor_axis > AET->bres.minor_axis) + pETEchase = pETEchase->back; + + AET = AET->next; + if (pETEchase != pETEinsert) + { + pETEchaseBackTMP = pETEchase->back; + pETEinsert->back->next = AET; + if (AET) + AET->back = pETEinsert->back; + pETEinsert->next = pETEchase; + pETEchase->back->next = pETEinsert; + pETEchase->back = pETEinsert; + pETEinsert->back = pETEchaseBackTMP; + changed = 1; + } + } + return(changed); +} + +/* + * Clean up our act. + */ +static void +FreeStorage(register ScanLineListBlock *pSLLBlock) +{ + register ScanLineListBlock *tmpSLLBlock; + + while (pSLLBlock) + { + tmpSLLBlock = pSLLBlock->next; + free((char *)pSLLBlock); + pSLLBlock = tmpSLLBlock; + } +} + +/* + * Create an array of rectangles from a list of points. + * If indeed these things (POINTS, RECTS) are the same, + * then this proc is still needed, because it allocates + * storage for the array, which was allocated on the + * stack by the calling procedure. + * + */ +static int PtsToRegion(register int numFullPtBlocks, register int iCurPtBlock, + POINTBLOCK *FirstPtBlock, TQRegionPrivate *reg) +{ + register TQRect *rects; + register TQPoint *pts; + register POINTBLOCK *CurPtBlock; + register int i; + register TQRect *extents; + register int numRects; + + extents = ®->extents; + + numRects = ((numFullPtBlocks * NUMPTSTOBUFFER) + iCurPtBlock) >> 1; + + reg->rects.resize(numRects); + + CurPtBlock = FirstPtBlock; + rects = reg->rects.data() - 1; + numRects = 0; + extents->setLeft( INT_MAX ); + extents->setRight( INT_MIN ); + + for ( ; numFullPtBlocks >= 0; numFullPtBlocks--) { + /* the loop uses 2 points per iteration */ + i = NUMPTSTOBUFFER >> 1; + if (!numFullPtBlocks) + i = iCurPtBlock >> 1; + for (pts = CurPtBlock->pts; i--; pts += 2) { + if ( pts->x() == pts[1].x() ) + continue; + if (numRects && pts->x() == rects->left() && pts->y() == rects->bottom() + 1 && + pts[1].x() == rects->right() && + (numRects == 1 || rects[-1].top() != rects->top()) && + (i && pts[2].y() > pts[1].y() )) { + rects->setBottom( pts[1].y() ); + continue; + } + numRects++; + rects++; + qt_setCoords( rects, pts->x(), pts->y(), pts[1].x() - 1, pts[1].y() ); + if (rects->left() < extents->left()) + extents->setLeft( rects->left() ); + if (rects->right() > extents->right()) + extents->setRight( rects->right() ); + } + CurPtBlock = CurPtBlock->next; + } + + if (numRects) { + extents->setTop( reg->rects[0].top() ); + extents->setBottom( rects->bottom() ); + } else { + qt_setCoords(extents, 0, 0, 0, 0); + } + reg->numRects = numRects; + + return(TRUE); +} + +/* + * polytoregion + * + * Scan converts a polygon by returning a run-length + * encoding of the resultant bitmap -- the run-length + * encoding is in the form of an array of rectangles. + */ +static TQRegionPrivate *PolygonRegion(TQPoint *Pts, int Count, int rule) + //Point *Pts; /* the pts */ + //int Count; /* number of pts */ + //int rule; /* winding rule */ +{ + TQRegionPrivate *region; + register EdgeTableEntry *pAET; /* Active Edge Table */ + register int y; /* current scanline */ + register int iPts = 0; /* number of pts in buffer */ + register EdgeTableEntry *pWETE; /* Winding Edge Table Entry*/ + register ScanLineList *pSLL; /* current scanLineList */ + register TQPoint *pts; /* output buffer */ + EdgeTableEntry *pPrevAET; /* ptr to previous AET */ + EdgeTable ET; /* header node for ET */ + EdgeTableEntry AET; /* header node for AET */ + EdgeTableEntry *pETEs; /* EdgeTableEntries pool */ + ScanLineListBlock SLLBlock; /* header for scanlinelist */ + int fixWAET = FALSE; + POINTBLOCK FirstPtBlock, *curPtBlock; /* PtBlock buffers */ + POINTBLOCK *tmpPtBlock; + int numFullPtBlocks = 0; + + if ( !(region = new TQRegionPrivate) ) + return 0; + + /* special case a rectangle */ + pts = Pts; + if (((Count == 4) || + ((Count == 5) && (pts[4].x() == pts[0].x() ) && (pts[4].y() == pts[0].y() ))) && + (((pts[0].y() == pts[1].y()) && + (pts[1].x() == pts[2].x()) && + (pts[2].y() == pts[3].y()) && + (pts[3].x() == pts[0].x())) || + ((pts[0].x() == pts[1].x()) && + (pts[1].y() == pts[2].y()) && + (pts[2].x() == pts[3].x()) && + (pts[3].y() == pts[0].y())))) { + region->extents.setLeft( TQMIN(pts[0].x(), pts[2].x()) ); + region->extents.setTop( TQMIN(pts[0].y(), pts[2].y()) ); + region->extents.setRight( TQMAX(pts[0].x(), pts[2].x()) ); + region->extents.setBottom( TQMAX(pts[0].y(), pts[2].y()) ); + if ((region->extents.left() <= region->extents.right()) && + (region->extents.top() <= region->extents.bottom())) { + region->numRects = 1; + region->rects.resize(1); + region->rects[0] = region->extents; + } + return region; + } + + if (! (pETEs = (EdgeTableEntry *) + malloc((unsigned) (sizeof(EdgeTableEntry) * Count)))) + return 0; + + pts = FirstPtBlock.pts; + CreateETandAET(Count, Pts, &ET, &AET, pETEs, &SLLBlock); + pSLL = ET.scanlines.next; + curPtBlock = &FirstPtBlock; + + if (rule == EvenOddRule) { + /* + * for each scanline + */ + for (y = ET.ymin; y < ET.ymax; y++) { + /* + * Add a new edge to the active edge table when we + * get to the next edge. + */ + if (pSLL != NULL && y == pSLL->scanline) { + loadAET(&AET, pSLL->edgelist); + pSLL = pSLL->next; + } + pPrevAET = &AET; + pAET = AET.next; + + /* + * for each active edge + */ + while (pAET) { + pts->setX( pAET->bres.minor_axis ), pts->setY( y ); + pts++, iPts++; + + /* + * send out the buffer + */ + if (iPts == NUMPTSTOBUFFER) { + tmpPtBlock = (POINTBLOCK *)malloc(sizeof(POINTBLOCK)); + curPtBlock->next = tmpPtBlock; + curPtBlock = tmpPtBlock; + pts = curPtBlock->pts; + numFullPtBlocks++; + iPts = 0; + } + EVALUATEEDGEEVENODD(pAET, pPrevAET, y) + } + (void) InsertionSort(&AET); + } + } + else { + /* + * for each scanline + */ + for (y = ET.ymin; y < ET.ymax; y++) { + /* + * Add a new edge to the active edge table when we + * get to the next edge. + */ + if (pSLL != NULL && y == pSLL->scanline) { + loadAET(&AET, pSLL->edgelist); + computeWAET(&AET); + pSLL = pSLL->next; + } + pPrevAET = &AET; + pAET = AET.next; + pWETE = pAET; + + /* + * for each active edge + */ + while (pAET) { + /* + * add to the buffer only those edges that + * are in the Winding active edge table. + */ + if (pWETE == pAET) { + pts->setX( pAET->bres.minor_axis), pts->setY( y ); + pts++, iPts++; + + /* + * send out the buffer + */ + if (iPts == NUMPTSTOBUFFER) { + tmpPtBlock = (POINTBLOCK *)malloc(sizeof(POINTBLOCK)); + curPtBlock->next = tmpPtBlock; + curPtBlock = tmpPtBlock; + pts = curPtBlock->pts; + numFullPtBlocks++; iPts = 0; + } + pWETE = pWETE->nextWETE; + } + EVALUATEEDGEWINDING(pAET, pPrevAET, y, fixWAET) + } + + /* + * recompute the winding active edge table if + * we just resorted or have exited an edge. + */ + if (InsertionSort(&AET) || fixWAET) { + computeWAET(&AET); + fixWAET = FALSE; + } + } + } + FreeStorage(SLLBlock.next); + (void) PtsToRegion(numFullPtBlocks, iPts, &FirstPtBlock, region); + for (curPtBlock = FirstPtBlock.next; --numFullPtBlocks >= 0;) { + tmpPtBlock = curPtBlock->next; + free((char *)curPtBlock); + curPtBlock = tmpPtBlock; + } + free((char *)pETEs); + return region; +} +// END OF PolyReg.c extract + +TQRegionPrivate *qt_bitmapToRegion(const TQBitmap& bitmap) +{ + TQImage image = bitmap.convertToImage(); + + TQRegionPrivate *region = new TQRegionPrivate; + TQRect xr; + +#define AddSpan \ + { \ + qt_setCoords( &xr, prev1, y, x-1, y ); \ + UnionRectWithRegion( &xr, region, region ); \ + } + + const int zero=0; + bool little = image.bitOrder() == TQImage::LittleEndian; + + int x, y; + for (y=0; y<image.height(); y++) { + uchar *line = image.scanLine(y); + int w = image.width(); + uchar all=zero; + int prev1 = -1; + for (x=0; x<w; ) { + uchar byte = line[x/8]; + if ( x>w-8 || byte!=all ) { + if ( little ) { + for ( int b=8; b>0 && x<w; b-- ) { + if ( !(byte&0x01) == !all ) { + // More of the same + } else { + // A change. + if ( all!=zero ) { + AddSpan + all = zero; + } else { + prev1 = x; + all = ~zero; + } + } + byte >>= 1; + x++; + } + } else { + for ( int b=8; b>0 && x<w; b-- ) { + if ( !(byte&0x80) == !all ) { + // More of the same + } else { + // A change. + if ( all!=zero ) { + AddSpan + all = zero; + } else { + prev1 = x; + all = ~zero; + } + } + byte <<= 1; + x++; + } + } + } else { + x+=8; + } + } + if ( all != zero ) { + AddSpan + } + } + + return region; +} + +// NOT REVISED + +static TQRegion *empty_region = 0; + +static void cleanup_empty_region() +{ + delete empty_region; + empty_region = 0; +} + + +/*! + Constructs a null region. + + \sa isNull() +*/ + +TQRegion::TQRegion() +{ + if ( !empty_region ) { // avoid too many allocs + qAddPostRoutine( cleanup_empty_region ); + empty_region = new TQRegion( TRUE ); + TQ_CHECK_PTR( empty_region ); + } + data = empty_region->data; + data->ref(); +} + +/*! \internal + Internal constructor that creates a null region. +*/ + +TQRegion::TQRegion( bool is_null ) +{ + data = new TQRegionData; + TQ_CHECK_PTR( data ); + data->region = new TQRegionPrivate; + data->is_null = is_null; + data->rgn = 0; + data->xrectangles = 0; +} + +/*! + \overload + + Create a region based on the rectange \a r with region type \a t. + + If the rectangle is invalid a null region will be created. + + \sa TQRegion::RegionType +*/ + +TQRegion::TQRegion( const TQRect &r, RegionType t ) +{ + if ( r.isEmpty() ) { + if ( !empty_region ) { // avoid too many allocs + qAddPostRoutine( cleanup_empty_region ); + empty_region = new TQRegion( TRUE ); + TQ_CHECK_PTR( empty_region ); + } + data = empty_region->data; + data->ref(); + } else { + data = new TQRegionData; + TQ_CHECK_PTR( data ); + data->is_null = FALSE; + data->rgn = 0; + data->xrectangles = 0; + if ( t == Rectangle ) { // rectangular region + data->region = new TQRegionPrivate( r ); + } else if ( t == Ellipse ) { // elliptic region + TQPointArray a; + a.makeEllipse( r.x(), r.y(), r.width(), r.height() ); + data->region = PolygonRegion( (TQPoint*)a.data(), a.size(), + EvenOddRule ); + } + } +} + + +/*! + Constructs a polygon region from the point array \a a. + + If \a winding is TRUE, the polygon region is filled using the + winding algorithm, otherwise the default even-odd fill algorithm + is used. + + This constructor may create complex regions that will slow down + painting when used. +*/ + +TQRegion::TQRegion( const TQPointArray &a, bool winding ) +{ + if (a.size() > 2) { + data = new TQRegionData; + TQ_CHECK_PTR( data ); + data->is_null = FALSE; + data->rgn = 0; + data->xrectangles = 0; + data->region = PolygonRegion( (TQPoint*)a.data(), a.size(), + winding ? WindingRule : EvenOddRule ); + } else { + if ( !empty_region ) { + qAddPostRoutine( cleanup_empty_region ); + empty_region = new TQRegion( TRUE ); + TQ_CHECK_PTR( empty_region ); + } + data = empty_region->data; + data->ref(); + } +} + + +/*! + Constructs a new region which is equal to region \a r. +*/ + +TQRegion::TQRegion( const TQRegion &r ) +{ + data = r.data; + data->ref(); +} + + +/*! + Constructs a region from the bitmap \a bm. + + The resulting region consists of the pixels in bitmap \a bm that + are \c color1, as if each pixel was a 1 by 1 rectangle. + + This constructor may create complex regions that will slow down + painting when used. Note that drawing masked pixmaps can be done + much faster using TQPixmap::setMask(). +*/ +TQRegion::TQRegion( const TQBitmap & bm ) +{ + if ( bm.isNull() ) { + if ( !empty_region ) { // avoid too many allocs + qAddPostRoutine( cleanup_empty_region ); + empty_region = new TQRegion( TRUE ); + TQ_CHECK_PTR( empty_region ); + } + data = empty_region->data; + data->ref(); + } else { + data = new TQRegionData; + TQ_CHECK_PTR( data ); + data->is_null = FALSE; + data->rgn = 0; + data->xrectangles = 0; + data->region = qt_bitmapToRegion(bm); + } +} + +/*! + Destroys the region. +*/ + +TQRegion::~TQRegion() +{ + if ( data->deref() ) { + delete data->region; + if ( data->rgn ) + XDestroyRegion( data->rgn ); + if ( data->xrectangles ) + free( data->xrectangles ); + delete data; + } +} + + +/*! + Assigns \a r to this region and returns a reference to the region. +*/ + +TQRegion &TQRegion::operator=( const TQRegion &r ) +{ + r.data->ref(); // beware of r = r + if ( data->deref() ) { + delete data->region; + if ( data->rgn ) + XDestroyRegion( data->rgn ); + if ( data->xrectangles ) + free( data->xrectangles ); + delete data; + } + data = r.data; + return *this; +} + + +/*! + Returns a \link shclass.html deep copy\endlink of the region. + + \sa detach() +*/ + +TQRegion TQRegion::copy() const +{ + TQRegion r( data->is_null ); + *r.data->region = *data->region; + return r; +} + +/*! + Returns TRUE if the region is a null region; otherwise returns + FALSE. + + A null region is a region that has not been initialized. A null + region is always empty. + + \sa isEmpty() +*/ + +bool TQRegion::isNull() const +{ + return data->is_null; +} + + +/*! + Returns TRUE if the region is empty; otherwise returns FALSE. An + empty region is a region that tqcontains no points. + + Example: + \code + TQRegion r1( 10, 10, 20, 20 ); + TQRegion r2( 40, 40, 20, 20 ); + TQRegion r3; + r1.isNull(); // FALSE + r1.isEmpty(); // FALSE + r3.isNull(); // TRUE + r3.isEmpty(); // TRUE + r3 = r1.intersect( r2 ); // r3 = intersection of r1 and r2 + r3.isNull(); // FALSE + r3.isEmpty(); // TRUE + r3 = r1.unite( r2 ); // r3 = union of r1 and r2 + r3.isNull(); // FALSE + r3.isEmpty(); // FALSE + \endcode + + \sa isNull() +*/ + +bool TQRegion::isEmpty() const +{ + return data->is_null || ( data->region->numRects == 0 ); +} + + +/*! + Returns TRUE if the region tqcontains the point \a p; otherwise + returns FALSE. +*/ + +bool TQRegion::tqcontains( const TQPoint &p ) const +{ + return PointInRegion( data->region, p.x(), p.y() ); +} + +/*! + \overload + + Returns TRUE if the region overlaps the rectangle \a r; otherwise + returns FALSE. +*/ + +bool TQRegion::tqcontains( const TQRect &r ) const +{ + return RectInRegion( data->region, r.left(), r.top(), + r.width(), r.height() ) != RectangleOut; +} + + +/*! + Translates (moves) the region \a dx along the X axis and \a dy + along the Y axis. +*/ + +void TQRegion::translate( int dx, int dy ) +{ + if ( empty_region && data == empty_region->data ) + return; + detach(); + OffsetRegion( data->region, dx, dy ); + if ( data->xrectangles ) { + free( data->xrectangles ); + data->xrectangles = 0; + } +} + + +/*! + Returns a region which is the union of this region and \a r. + + \img runion.png Region Union + + The figure shows the union of two elliptical regions. +*/ + +TQRegion TQRegion::unite( const TQRegion &r ) const +{ + TQRegion result( FALSE ); + UnionRegion( data->region, r.data->region, result.data->region ); + return result; +} + +/*! + Returns a region which is the intersection of this region and \a r. + + \img rintersect.png Region Intersection + + The figure shows the intersection of two elliptical regions. +*/ + +TQRegion TQRegion::intersect( const TQRegion &r ) const +{ + TQRegion result( FALSE ); + IntersectRegion( data->region, r.data->region, result.data->region ); + return result; +} + +/*! + Returns a region which is \a r subtracted from this region. + + \img rsubtract.png Region Subtraction + + The figure shows the result when the ellipse on the right is + subtracted from the ellipse on the left. (\c left-right ) +*/ + +TQRegion TQRegion::subtract( const TQRegion &r ) const +{ + TQRegion result( FALSE ); + SubtractRegion( data->region, r.data->region, result.data->region ); + return result; +} + +/*! + Returns a region which is the exclusive or (XOR) of this region + and \a r. + + \img rxor.png Region XORed + + The figure shows the exclusive or of two elliptical regions. +*/ + +TQRegion TQRegion::eor( const TQRegion &r ) const +{ + TQRegion result( FALSE ); + XorRegion( data->region, r.data->region, result.data->region ); + return result; +} + +/*! + Returns the bounding rectangle of this region. An empty region + gives a rectangle that is TQRect::isNull(). +*/ + +TQRect TQRegion::boundingRect() const +{ + return data->region->extents; +} + + +/*! + Returns an array of non-overlapping rectangles that make up the + region. + + The union of all the rectangles is equal to the original region. +*/ + +TQMemArray<TQRect> TQRegion::rects() const +{ + TQMemArray<TQRect> rects; + rects.duplicate( data->region->rects, data->region->numRects ); + return rects; +} + +/*! + Sets the region to be the given set of rectangles. The rectangles + \e must be optimal Y-X sorted bands as follows: + <ul> + <li> The rectangles must not intersect + <li> All rectangles with a given top coordinate must have the same height. + <li> No two rectangles may abut horizontally (they should be combined + into a single wider rectangle in that case). + <li> The rectangles must be sorted ascendingly by Y as the major sort key + and X as the minor sort key. + </ul> + \internal + Only some platforms have that restriction (TQWS and X11). +*/ +void TQRegion::setRects( const TQRect *rects, int num ) +{ + *this = TQRegion( FALSE ); + if ( !rects || (num == 1 && rects->isEmpty()) ) + num = 0; + + data->region->rects.duplicate( rects, num ); + data->region->numRects = num; + if ( num == 0 ) { + data->region->extents = TQRect(); + } else { + int left = INT_MAX, right = INT_MIN, top = INT_MAX, bottom = INT_MIN; + int i; + for ( i = 0; i < num; i++ ) { + left = TQMIN( rects[i].left(), left ); + right = TQMAX( rects[i].right(), right ); + top = TQMIN( rects[i].top(), top ); + bottom = TQMAX( rects[i].bottom(), bottom ); + } + data->region->extents = TQRect( TQPoint(left, top), TQPoint(right, bottom) ); + } +} + +/*! + Returns TRUE if the region is equal to \a r; otherwise returns + FALSE. +*/ + +bool TQRegion::operator==( const TQRegion &r ) const +{ + return data == r.data ? + TRUE : EqualRegion( data->region, r.data->region ); +} + +/*! + \fn bool TQRegion::operator!=( const TQRegion &r ) const + + Returns TRUE if the region is different from \a r; otherwise + returns FALSE. +*/ + +/* + This is how X represents regions internally. +*/ + +struct BOX { + short x1, x2, y1, y2; +}; + +struct _XRegion { + long size; + long numRects; + BOX *rects; + BOX extents; +}; + + +void TQRegion::updateX11Region() const +{ + data->rgn = XCreateRegion(); + + for( int i = 0; i < data->region->numRects; i++ ) { + XRectangle r; + const TQRect &rect = data->region->rects[i]; + r.x = TQMAX( SHRT_MIN, rect.x() ); + r.y = TQMAX( SHRT_MIN, rect.y() ); + r.width = TQMIN( USHRT_MAX, rect.width() ); + r.height = TQMIN( USHRT_MAX, rect.height() ); + XUnionRectWithRegion( &r, data->rgn, data->rgn ); + } +} + + +void *TQRegion::clipRectangles( int &num ) const +{ + if ( !data->xrectangles ) { + XRectangle *r = (XRectangle *) malloc( data->region->numRects * sizeof( XRectangle ) ); + data->xrectangles = r; + for( int i = 0; i < data->region->numRects; i++ ) { + const TQRect &rect = data->region->rects[i]; + r->x = TQMAX( SHRT_MIN, rect.x() ); + r->y = TQMAX( SHRT_MIN, rect.y() ); + r->width = TQMIN( USHRT_MAX, rect.width() ); + r->height = TQMIN( USHRT_MAX, rect.height() ); + r++; + } + } + num = data->region->numRects; + return data->xrectangles; +} + +#endif // USE_QT4
\ No newline at end of file |