path: root/doc/kate/advanced.docbook

<chapter id="advanced-editing-tools">
<chapterinfo>
<authorgroup>
<author>&Anders.Lund; &Anders.Lund.mail;</author>
<author>&Dominik.Haumann; &Dominik.Haumann.mail;</author>
<author>&tde-authors;</author>
<!-- TRANS:ROLES_OF_TRANSLATORS -->
</authorgroup>
</chapterinfo>
<title>Advanced Editing Tools</title>

<sect1 id="advanced-editing-tools-comment">

<title>Comment/Uncomment</title>

<para>The Comment and Uncomment commands, available from the
<guimenu>Tools</guimenu> menu allow you to add or remove comment
markers to the selection, or to the current line if no text is selected,
if comments are supported by the format of the file you are
editing.</para>

<para>The rules for how commenting is done are defined in the syntax
definitions, so if syntax highlighting is not used, commenting/uncommenting
is not possible.</para>

<para>Some formats define single line comment markers, some multiline
markers and some both.  If multiline markers are not available,
commenting out a selection that does not fully include its last line
is not possible.</para>

<para>If a single line marker is available, commenting single lines is
preferred where applicable, as this helps to avoid problems with
nested comments.</para>

<para>When removing comment markers, no uncommented text should be
selected. When removing multiline comment markers from a selection,
any whitespace outside the comment markers is ignored.</para>

<para><indexterm><primary>comment</primary></indexterm>
To place comment markers, use the
<menuchoice><guimenu>Tools</guimenu><guimenuitem>Comment</guimenuitem></menuchoice>
menu item or the related keyboard shortcut sequence, default is
<keycombo action="simul">&Ctrl;<keycap>D</keycap></keycombo>.</para>

<para><indexterm><primary>uncomment</primary></indexterm>
To remove comment markers, use the
<menuchoice><guimenu>Tools</guimenu><guimenuitem>Uncomment</guimenuitem></menuchoice>
menu item or the related keyboard shortcut, default is <keycombo
action="simul">&Ctrl;&Shift;<keycap>D</keycap></keycombo>.</para>

</sect1>

<sect1 id="advanced-editing-tools-commandline">
<title>The Editor Component Command Line</title>

<para>Kate's editor component has an internal command line, allowing you to
perform various actions from a minimal GUI. The command line is a text entry
in the bottom of the editor area, to show it select
<menuchoice><guimenu>View</guimenu><guimenuitem>Switch to Command Line</guimenuitem></menuchoice>
or use the keyboard shortcut (default is
<keycombo action="simul"><keycap>F7</keycap></keycombo>). The editor provides
a set of commands as documented below, and additional commands can be provided
by plugins.</para>

<para>To execute a command, type the command and then press the enter key. The
command line will indicate whether it succeeded and possibly display a message. If
you entered the command line by pressing <keycap>F7</keycap> it will
automatically hide after a few seconds. To clear the message and enter a new
command, press <keycap>F7</keycap> again.</para>

<para>The command line has a built-in help system, you can type the command
<command>help</command> to get started. To see a list of all available commands
type <command>help list</command>, to view help for a specific command, do
<command>help <replaceable>command</replaceable></command>.</para>

<para>The command line has a built-in history too, so you can reuse commands already
typed. To navigate the history, use the <keycap>Up</keycap> and
<keycap>Down</keycap> keys. When showing historical commands, the argument part
of the command will be selected, allowing you to easily overwrite the
arguments.</para>

<sect2 id="advanced-editing-tools-commandline-commands">
<title>Standard Command Line Commands</title>

<variablelist>
<title>Argument types</title>

<varlistentry>
<term>BOOLEAN</term>
<listitem><para>This is used with commands that turn things on or off.
Legal values are <userinput>on</userinput>, <userinput>off</userinput>,
<userinput>true</userinput>, <userinput>false</userinput>,
<userinput>1</userinput>, <userinput>0</userinput></para></listitem>
</varlistentry>

<varlistentry>
<term>INTEGER</term>
<listitem><para>An integer number</para></listitem>
</varlistentry>

<varlistentry>
<term>STRING</term>
<listitem><para>A string</para></listitem>
</varlistentry>

</variablelist>

<sect3 id="advanced-editing-tools-commandline-commands-configure">
<title>Commands for Configuring the Editor</title>

<para>These commands are provided by the editor component, and allows you to
configure the active document and view only. This is handy if you want to use
a setting different from the default settings, for example for indentation.
</para>

<variablelist>

<varlistentry>
<term><cmdsynopsis><command>set-tab-width</command><arg>INTEGER width</arg></cmdsynopsis></term>
<listitem><para>Sets the tab width to the number <userinput>width</userinput></para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-indent-width</command><arg>INTEGER width</arg></cmdsynopsis></term>
<listitem><para>Sets the indentation width to the number
<userinput>width</userinput>. Used only if you are indenting with
spaces.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-word-wrap-column</command><arg>INTEGER width</arg></cmdsynopsis></term>
<listitem><para>Sets the line width for hard wrapping to
<userinput>width</userinput>. This is used if you are having your text wrapped
automatically.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-icon-border</command><arg>BOOLEAN enable</arg>
</cmdsynopsis></term>
<listitem><para>Sets the visibility of the icon border.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-folding-markers</command><arg>BOOLEAN enable</arg></cmdsynopsis></term>
<listitem><para>Sets the visibility of the folding markers pane.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-line-numbers</command><arg>BOOLEAN enable</arg></cmdsynopsis></term>
<listitem><para>Sets the visibility of the line numbers pane.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-replace-tabs</command><arg>BOOLEAN enable</arg></cmdsynopsis></term>
<listitem><para>If enabled, tabs are replaced with spaces as you type.
</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-remove-trailing-space</command><arg>BOOLEAN enable</arg></cmdsynopsis></term>
<listitem><para>If enabled, trailing whitespace are removed whenever the cursor
leaves a line.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-show-tabs</command><arg>BOOLEAN enable</arg></cmdsynopsis></term>
<listitem><para>If enabled, TAB characters and trailing whitespace will be
visualized by a small dot.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-indent-spaces</command><arg>BOOLEAN enable</arg></cmdsynopsis></term>
<listitem><para>If enabled, the editor will indent with
<option>indent-width</option> spaces for each indentation level, rather than
with one TAB character.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-mixed-indent</command><arg>BOOLEAN enable</arg></cmdsynopsis></term>
<listitem><para>If enabled, kate will use a mix of TAB and spaces for
indentation. Each indentation level will be <option>indent-width</option> wide,
and more indentation levels will be optimized to use as many TAB characters as
possible.</para>
<para>When executed, this command will additionally set space indentation enabled,
and if the indent width is unspecified it will be set to half of the
<option>tab-width</option> for the document at the time of execution.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-word-wrap</command><arg>BOOLEAN 
enable</arg></cmdsynopsis></term>
<listitem><para>Enables dynamic word wrap according to
<userinput>enable</userinput></para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-replace-tabs-save</command><arg>BOOLEAN enable
</arg></cmdsynopsis></term>
<listitem><para>When enabled, tabs will be replaced with whitespaces whenever
 the document is saved.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-remove-trailing-space-save</command><arg>BOOLEAN enable</arg></cmdsynopsis></term>
<listitem><para>When enabled, trailing space will be removed from each line
whenever the document is saved.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-indent-mode</command><arg>name</arg></cmdsynopsis></term>
<listitem><para>Sets the autoindentation mode to <userinput>name</userinput>.
If <userinput>name</userinput> is not known, the mode is set to 'none'. Valid
modes are 'cstyle', 'csands', 'xml', 'python', 'varindent' and 'none'.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>set-highlight</command><arg>highlight</arg></cmdsynopsis></term>
<listitem><para>Sets the syntax highlighting system for the document. The
argument must be a valid highlight name, as seen in the
<menuchoice><guimenu>Tools</guimenu><guisubmenu>Highlighting</guisubmenu></menuchoice>
menu. This command provides an autocompletion list for its
argument.</para></listitem>
</varlistentry>

</variablelist>

</sect3>

<sect3 id="advanced-editing-tools-commandline-commands-edit">
<title>Commands for editing</title>

<para>These commands modify the current document.</para>

<variablelist>
<varlistentry>
<term><cmdsynopsis><command>indent</command></cmdsynopsis></term>
<listitem><para>Indents the selected lines or the current line.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>unindent</command></cmdsynopsis></term>
<listitem><para>Unindents the selected lines or current line.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>cleanindent</command></cmdsynopsis></term>
<listitem><para>Cleans up the indentation of the selected lines or current line
according to the indentation settings in the document.
</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>comment</command></cmdsynopsis></term>
<listitem><para>Inserts comment markers to make the selection or selected lines
or current line a comment according to the text format as defined by the syntax
highlight definition for the document.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>uncomment</command></cmdsynopsis></term>
<listitem><para>Removes comment markers from the selection or selected lines
or current line according to the text format as defined by the syntax highlight
definition for the document.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>kill-line</command></cmdsynopsis></term>
<listitem><para>Deletes the current line.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>replace</command><arg>pattern</arg><arg>replacement</arg></cmdsynopsis></term>
<listitem><para>Replaces text matching <userinput>pattern</userinput> with
<userinput>replacement</userinput>. If you want to include whitespace in the
<userinput>pattern</userinput>, you must quote both the <userinput>pattern</userinput>
and <userinput>replacement</userinput> with single or double quotes. If the
arguments are unquoted, the first word is used as <userinput>pattern</userinput>
and the rest for <userinput>replacement</userinput>. If
<userinput>replacement</userinput> is empty, each occurrence of
<userinput>pattern</userinput> is removed.</para>
<para>You can set flags to configure the search by adding a colon, followed
by one or more letters each representing a configuration, giving the form
<userinput>replace:options pattern replacement</userinput>. Available options
are:

<variablelist>

<varlistentry>
<term><userinput>b</userinput></term>
<listitem><para>Search backwards.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>c</userinput></term>
<listitem><para>Search from cursor position.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>e</userinput></term>
<listitem><para>Search in the selection only.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>r</userinput></term>
<listitem><para>Do regular expression search. If set, you may use
<userinput>\N</userinput> where N is a number to represent captures in the
replacement string.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>s</userinput></term>
<listitem><para>Do case sensitive search.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>p</userinput></term>
<listitem><para>Prompt for permission to replace the next occurence.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>w</userinput></term>
<listitem><para>Match whole words only.</para></listitem>
</varlistentry>

</variablelist>

</para>
</listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>date</command><arg>format</arg></cmdsynopsis></term>
<listitem><para>Inserts a date/time string as defined by the specified
<userinput>format</userinput>, or the format <quote>yyyy-MM-dd hh:mm:ss</quote>
if none is specified. The following translations are done when interpreting
<userinput>format</userinput>:

<informaltable>
<tgroup cols="2">
<tbody>
<row><entry><literal>d</literal></entry><entry>The day as number without a leading zero (1-31).</entry></row>
<row><entry><literal>dd</literal></entry><entry>The day as number with a leading zero (01-31).</entry></row>
<row><entry><literal>ddd</literal></entry><entry>The abbreviated localized day name (e.g. 'Mon'..'Sun').</entry></row>
<row><entry><literal>dddd</literal></entry><entry>The long localized day name (e.g. 'Monday'..'Sunday').</entry></row>
<row><entry><literal>M</literal></entry><entry>The month as number without a leading zero (1-12).</entry></row>
<row><entry><literal>MM</literal></entry><entry>The month as number with a leading zero (01-12).</entry></row>
<row><entry><literal>MMM</literal></entry><entry>The abbreviated localized month name (e.g. 'Jan'..'Dec').</entry></row>
<row><entry><literal>yy</literal></entry><entry>The year as two digit number
(00-99).</entry></row>
<row><entry><literal>yyyy</literal></entry><entry>The year as four digit number (1752-8000).</entry></row>
<row><entry><literal>h</literal></entry><entry>The hour without a leading zero (0..23 or 1..12 if AM/PM display).</entry></row>
<row><entry><literal>hh</literal></entry><entry>The hour with a leading zero (00..23 or 01..12 if AM/PM display).</entry></row>
<row><entry><literal>m</literal></entry><entry>The minute without a leading zero (0..59).</entry></row>
<row><entry><literal>mm</literal></entry><entry>The minute with a leading zero (00..59).</entry></row>
<row><entry><literal>s</literal></entry><entry>The second without a leading zero (0..59).</entry></row>
<row><entry><literal>ss</literal></entry><entry>The second with a leading zero (00..59).</entry></row>
<row><entry><literal>z</literal></entry><entry>The milliseconds without leading zeroes (0..999).</entry></row>
<row><entry><literal>zzz</literal></entry><entry>The milliseconds with leading zeroes (000..999).</entry></row>
<row><entry><literal>AP</literal></entry><entry>Use AM/PM display. AP will be replaced by either "AM" or "PM".</entry></row>
<row><entry><literal>ap</literal></entry><entry>Use am/pm display. ap will be replaced by either "am" or "pm".</entry></row>

</tbody>
</tgroup>
</informaltable>

</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>char</command><arg>identifier</arg></cmdsynopsis></term>
<listitem>
<para>This command allows you to insert literal characters by their
numerical identifier, in decimal, octal or hexadecimal form.
To use it launch the Editing Command dialog and type <userinput>char:
[number]</userinput> in the entry box, then hit
<guibutton>OK</guibutton>.</para>

<example>
<title><command>char</command> examples</title>

<para>Input: <userinput>char:234</userinput></para>
<para>Output: <computeroutput>&#234;</computeroutput></para>
<para>Input: <userinput>char:0x1234</userinput></para>
<para>Output: <computeroutput>&#x1234;</computeroutput></para>
</example>

</listitem>
</varlistentry>

<varlistentry>
<term>
<indexterm><primary>replace, sed style</primary>
<secondary>search, sed style</secondary></indexterm>
<command>s///[ig]</command> and <command>%s///[ig]</command></term>

<listitem>
<para>This command does a sed-like search/replace operation on the
current line, or on the whole file (<command>%s///</command>).</para>

<para>In short, &kate; searches for text matching the
<emphasis>search pattern</emphasis> (the regular expression between
the first and the second slash), and when a match is found the
matching part of the text is replaced with the expression between the
middle and last slash. Parenthesis in the search pattern
create <emphasis>back references</emphasis>, that is the command
remembers which part of the text matched in the parenthesis. These
strings can be reused in the replace pattern, referred to as
<userinput>\1</userinput> for the first set of parenthesis,
<userinput>\2</userinput> for the second and so on.</para>

<para>To search for a literal <literal>(</literal> or
<literal>)</literal>, you need to escape it using
a backslash character: <userinput>\(, \)</userinput></para>

<para>If you put an <userinput>i</userinput> at the end of the
expression, the matching will be case insensitive. If you put a
<userinput>g</userinput> at the end, all occurrences of the pattern will be
replaced, otherwise only the first occurrence is replaced.</para>

<example>

<title>Replacing text in the current line</title>

<para>Your friendly compiler just stopped, telling you that the class
<classname>myClass</classname> mentioned in line 3902 in your source file
is not defined.</para>

<para>&quot;Buckle!&quot; you think, it is of course
<classname>MyClass</classname>. You go to line 3902, and instead of trying
to find the word in the text, you launch the Editing Command Dialog,
enter <userinput>s/myclass/MyClass/i</userinput>, hit the
<guibutton>OK</guibutton> button, save the file and compile
successfully without the error.</para>

</example>

<example>
<title>Replacing text in the whole file</title>

<para>Imagine that you have a file, in which you mention a <quote>Miss
Jensen</quote> several times, when someone comes in and tells you that
she just got married to <quote>Mr. Jones</quote>. You want, of course,
to replace each and every occurrence of <quote>Miss Jensen</quote>
with <quote>Ms Jones</quote>.</para>

<para>Enter the command line and issue the command
<userinput>%s/Miss Jensen/Ms. Jones/</userinput> and hit enter, you
are done.</para>

</example>

</listitem>

</varlistentry>

</variablelist>

</sect3>

<sect3 id="advanced-editing-tools-commandline-commands-navigation">
<title>Commands for navigation</title>

<variablelist>

<varlistentry>
<term><cmdsynopsis><command>goto</command><arg>INT line</arg></cmdsynopsis></term>
<listitem><para>This command navigates to the specified line.</para></listitem>
</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>find</command><arg>pattern</arg></cmdsynopsis></term>
<listitem><para>This command navigates to the first occurrence of
<userinput>pattern</userinput> according to the configuration. Following
occurrences can be found using
<menuchoice><guimenu>Edit</guimenu><guimenuitem>Find Next</guimenuitem></menuchoice>
(the default shortcut is <keycap>F3</keycap>).</para>
<para>The find command can be configured by appending a colon followed by one or
more options, the form is
<userinput>find:options pattern</userinput>. The
following options are supported:

<variablelist>

<varlistentry>
<term><userinput>b</userinput></term>
<listitem><para>Search backwards.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>c</userinput></term>
<listitem><para>Search from cursor position.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>e</userinput></term>
<listitem><para>Search in the selection only.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>r</userinput></term>
<listitem><para>Do regular expression search.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>s</userinput></term>
<listitem><para>Do case sensitive search.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>w</userinput></term>
<listitem><para>Match whole words only.</para></listitem>
</varlistentry>

</variablelist>

</para>

</listitem>

</varlistentry>

<varlistentry>
<term><cmdsynopsis><command>ifind</command><arg>pattern</arg></cmdsynopsis></term>
<listitem><para>This command provides <quote>incremental (as-you-type)</quote> searching. You
can configure the behavior of the search by appending a colon
followed by one or more options, like this:
<userinput>ifind:options pattern</userinput>. Allowed options are:

<variablelist>
<varlistentry>
<term><userinput>b</userinput></term>
<listitem><para>Search backwards.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>r</userinput></term>
<listitem><para>Do regular expression search.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>s</userinput></term>
<listitem><para>Do case sensitive search.</para></listitem>
</varlistentry>

<varlistentry>
<term><userinput>c</userinput></term>
<listitem><para>Search from cursor position.</para></listitem>
</varlistentry>

</variablelist>
</para></listitem>
</varlistentry>

</variablelist>

</sect3>

</sect2>

</sect1>

<sect1 id="advanced-editing-tools-code-folding">
<title>Using Code Folding</title>

<para>Code folding allows you to hide parts of a document in the editor, making
it easier to overview large documents. In &kate; the foldable regions are
calculated using rules defined in the syntax highlight definitions and
therefore it is only available in some file formats - typically program source code,
XML markup and similar. Most highlight definition files supporting code folding
also let you manually define foldable regions, typically using the
<userinput>BEGIN</userinput> and <userinput>END</userinput> keywords.</para>

<para>To use the code folding feature, activate the folding markers using
<menuchoice><guimenu>View</guimenu><guimenuitem>Show Folding
Markers</guimenuitem></menuchoice> menu item if they are not already visible.
The Folding Markers Pane in the left side of the screen displays a graphical
view of the foldable regions, with +/- signs to indicate the possible operation
on a given region. A - means that the region is expanded; clicking on the - will
collapse the region and a + will be displayed instead.</para>

<para>Four commands are provided to manipulate the state of folding regions,
see the <link linkend="view-code-folding">menu documentation</link> for details.
</para>

<para>If you do not want to use the code folding feature, you can disable it 
completely using the <guilabel>Show folding markers (if available)</guilabel> option in the
<link linkend="appearance-code-folding">Editor Appearance</link> configuration page</para>

</sect1>

<sect1 id="advanced-editing-tools-scripting">

<title>Scripting the editor with JS</title>

<sect2 id="advanced-editing-tools-scripting-introduction">

<title>Introduction</title>

<para>Starting with version 2.5, the &kate; editor component supports
scripting with ECMA script, also known as JavaScript.</para>

<para>Scripts can be used through <link
linkend="advanced-editing-tools-commandline">the built-in command line</link>
only. The requirements are that the scripts are placed in a folder where &kate;
can find them, along with an optional .desktop file that defines the related
properties. The valid folders are named <filename>katepart/scripts</filename>
in the &tde; data folders. You can find the data folders by running the command
<command>tde-config <option>--path</option> <parameter>data</parameter></command>.
You will usually have at least a system and a personal data folder. Of course
scripts in the system data folder are available to all users on the system,
while those in the personal folder are available to you only.</para>

</sect2>

<sect2 id="advanced-editing-tools-scripting-reference">

<title>The Kate JavaScript API</title>

<para>Here is the complete set of functions and properties available
in the <type>document</type> and <type>view</type> objects.
In addition, you can use all the standard objects such as
<type>Math</type>, <type>String</type> <type>Regex</type> and so forth.</para>

<para>When a script is run, the <classname>document</classname> object is the
current document, and the <classname>view</classname> object is the current
view.</para>

<note><para>Types are not used in JavaScript. In this list, they are
there solely to indicate what sort of arguments the functions expect.</para></note>

<variablelist id="advanced-editing-tools-scripting-global">
<title>Global Functions</title>
<varlistentry>
<term><function>debug(<parameter><replaceable>string s</replaceable></parameter>)
function</function></term>
<listitem>
<itemizedlist>
<title>parameters</title>
<listitem><para><parameter>s</parameter> the string to output.</para>
</listitem>
</itemizedlist>
<para>Outputs the string to <acronym>STDERR</acronym> using
<function>kdDebug()</function>. A dedicated output area is used for the output,
which will be prefixed by "<emphasis>Kate (KJS Scripts):</emphasis>"
</para>
</listitem>
</varlistentry>
</variablelist>

<variablelist id="advanced-editing-tools-scripting-document">
<title>The <classname>document</classname> API</title>

<varlistentry>
<term><function>document.attribute(<parameter><replaceable>uint line</replaceable></parameter>,
<parameter><replaceable>uint column</replaceable></parameter>)
function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>line</parameter> the line of the position for which
to find the attribute.</para></listitem>
<listitem><para><parameter>column</parameter> the column of the position for
which to find the attribute.</para></listitem>
</itemizedlist>
<para>Returns the numeric ID of the attribute for the document position
[<parameter>line</parameter>, <parameter>column</parameter>]. The attribute
represents the visual appearance or style of the text, and is also used to
calculate the syntax highlight for a specific part of the text in mixed formats
like HTML or PHP.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.canBreakAt(<parameter>char c</parameter>,
<parameter>attribute attrib</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>c</parameter> the character to test.</para></listitem>
<listitem><para><parameter>attrib</parameter> the attribute at the position
of <parameter>c</parameter>.</para></listitem>
</itemizedlist>
<para>Returns whether it is allowed to break the line at the character
<parameter>c</parameter> with attribute <parameter>attribute</parameter>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.canComment(<parameter>attribute start_attrib</parameter>,
<parameter>attribute end_attrib</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>start_attrib</parameter> the attribute at the
start of the range to turn into a comment.</para></listitem>
<listitem><para><parameter>end_attrib</parameter> the attribute at end of
the range to turn into a comment.</para></listitem>
</itemizedlist>
<para>Returns whether <parameter>start_attribute</parameter> and
<parameter>end_attribute</parameter> belongs to the same
syntax highlight system. If they do, it is possible to comment the block.
</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.clear() function</function></term>
<listitem><para>Clears the document.</para></listitem>
</varlistentry>

<varlistentry>
<term><function>document.commentStart(<parameter>attribute attrib</parameter>)
function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>attrib</parameter> the attribute of the text for
which to get the commentStart string.</para></listitem>
</itemizedlist>
<para>Returns the string required to start a multiline comment for a text with
attribute <parameter>attrib</parameter>, or an empty string if multiline comments are not supported for that
text.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.commentMarker(<parameter>attribute attrib</parameter>)
function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>attrib</parameter> the attribute of the text for
which to get the commentMarker string.</para></listitem>
</itemizedlist>
<para>Returns the string used to mark the rest of the line as a comment for a
text with attribute <parameter>attrib</parameter> or an empty string if single
line comments are not supported for that text.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.commentEnd(<parameter>attribute attrib</parameter>)
function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>attrib</parameter> the attribute of the text for
which to get the commentEnd string.</para></listitem>
</itemizedlist>
<para>Returns the string required to end a multiline comment for a text with
attribute <parameter>attrib</parameter>, or an empty string if multiline
comments are not supported for that text.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.editBegin() function</function></term>
<listitem>
<para>Starts an editing group. All actions done until the call to editEnd() will
be grouped as a single undo action.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.editEnd() function</function></term>
<listitem>
<para>Ends an editing group.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.highlightMode property, read only</function></term>
<listitem>
<para>The name of the document's highlight mode, such as JavaScript or C++.
If no syntax highlight mode is set for the document, the value is <emphasis>none</emphasis>.
Notice that you need to use the English name in cases where it differs from the
translated one.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.indentMode property, read only</function></term>
<listitem>
<para>The name of the document indent mode, such as
<literal>normal</literal> or <literal>cstyle</literal>.
If no indent mode is set, the value is <emphasis>none</emphasis>.
</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.indentWidth property, read only</function></term>
<listitem>
<para>The indentation width set for the document. This is used if space
indenting is enabled.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.insertLine(<parameter>uint line</parameter>,
<parameter>string text</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>line</parameter> the document line number.</para>
</listitem>
<listitem><para><parameter>text</parameter> the text to insert.</para></listitem>
</itemizedlist>
<para>Inserts a new line with the text <parameter>text</parameter> at the
line <parameter>line</parameter>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.insertText(<parameter>uint line</parameter>,
<parameter>uint column</parameter>, <parameter>string text</parameter>)
function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>line</parameter> the line number.</para></listitem>
<listitem><para><parameter>column</parameter> the column number.</para></listitem>
<listitem><para><parameter>text</parameter> the text to insert.</para></listitem>
</itemizedlist>
<para>Inserts the text <parameter>text</parameter> in line
<parameter>line</parameter> at column <parameter>column</parameter>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term>document.length() function</term>
<listitem>
<para>Returns the document's size in bytes.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.lines() function</function></term>
<listitem>
<para>Returns the number of lines in the document.</para>
</listitem>
</varlistentry>

<varlistentry>
<term>document.mixedIndent property, read only</term>
<listitem>
<para>A boolean telling whether the mixed-indent setting is enabled for the
document. If so, indentation is optimized to contain a mix of tab characters and
spaces like in the Emacs editor.</para>
</listitem>
</varlistentry>

<varlistentry>
<term>document.removeLine(<parameter>uint line</parameter>) function</term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>line</parameter> the line number.</para></listitem>
</itemizedlist>
<para>Removes the document line <parameter>line</parameter>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.removeText(<parameter>uint startLine</parameter>,
<parameter>uint startColumn</parameter>, <parameter>uint endLine</parameter>,
<parameter>uint endColumn</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>startLine</parameter> specifies the beginning line.</para></listitem>
<listitem><para><parameter>startColumn</parameter> specifies the beginning column.</para></listitem>
<listitem><para><parameter>endLine</parameter> specifies the ending line.</para></listitem>
<listitem><para><parameter>endColumn</parameter> specifies the ending column.</para></listitem>
</itemizedlist>
<para>Removes the text range from line <parameter>startLine</parameter> and
column <parameter>startColumn</parameter> to line
<parameter>endLine</parameter> and column <parameter>endColumn</parameter>.
</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.setText(<parameter>string text</parameter>)
function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>text</parameter> the new document text.</para></listitem>
</itemizedlist>
<para>Sets the entire document content to <parameter>text</parameter>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.spaceIndent property, read only</function></term>
<listitem>
<para>A boolean telling whether space-indent is enabled for the document.
If so, the document is indented with indentWidth spaces per level, otherwise
indentation is one tab character per level.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.textFull() function</function></term>
<listitem>
<para>Returns the full document text. If the text spans over multiple lines the
linefeed character is <constant>\n</constant>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.textLine(<parameter>uint line</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>line</parameter> the line number.</para></listitem>
</itemizedlist>
<para>Returns the text at line <parameter>line</parameter>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>document.textRange(<parameter>uint startLine</parameter>,
<parameter>uint startColumn</parameter>, <parameter>uint endLine</parameter>,
<parameter>uint endColumn</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>startLine</parameter> specifies the beginning line.</para></listitem>
<listitem><para><parameter>startColumn</parameter> specifies the beginning column.</para></listitem>
<listitem><para><parameter>endLine</parameter> specifies the ending line.</para></listitem>
<listitem><para><parameter>endColumn</parameter> specifies the ending column.</para></listitem>
</itemizedlist>
<para>Returns the specified text range. If the range spans over multiple lines
the linefeed character is <constant>\n</constant>.</para>
</listitem>
</varlistentry>

</variablelist><!--/ document API -->

<variablelist id="advanced-editing-tools-scripting-view">
<title>The <classname>view</classname> API</title>

<varlistentry>
<term><function>view.clearSelection() function</function></term>
<listitem>
<para>Deselects all text.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.cursorColumn() function</function></term>
<listitem>
<para>Returns the current cursor column (TAB characters are expanded).</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.cursorColumnReal() function</function></term>
<listitem>
<para>Returns the current real cursor column (a TAB character counts as one).</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.cursorLine() function</function></term>
<listitem>
<para>Returns the current cursor line.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.hasSelection() function</function></term>
<listitem>
<para>Returns <constant>true</constant> if some text in the view has been selected,
otherwise <constant>false</constant>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.removeSelectedText() function</function></term>
<listitem>
<para>Removes the selected text, if the view has a selection.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.selectAll() function</function></term>
<listitem>
<para>Selects all text.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.selection() function</function></term>
<listitem>
<para>Returns the selected text. If the selection spans over multiple lines the
linefeed character is <constant>\n</constant>.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.selectionEndColumn property, read only</function></term>
<listitem>
<para>Returns the ending column of the selection.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.selectionEndLine property, read only</function></term>
<listitem>
<para>Returns the ending line of the selection.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.selectionStartColumn property, read only</function></term>
<listitem>
<para>Returns the starting column of the selection.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.selectionStartLine property, read only</function></term>
<listitem>
<para>Returns the starting line of the selection.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.setCursorPosition(<parameter>uint line</parameter>,
<parameter>uint column</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>line</parameter> specifies the new line for the cursor.</para></listitem>
<listitem><para><parameter>column</parameter> specifies the new column for the cursor.</para></listitem>
</itemizedlist>
<para>Sets the input cursor position in the view to (<parameter>line</parameter>,
<parameter>column</parameter>). TAB characters are expanded and
the cursor position is made visible. Both <parameter>line</parameter>
and <parameter>column</parameter> are zero-based.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.setCursorPositionReal(<parameter>uint line</parameter>,
<parameter>uint column</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>line</parameter> specifies the new line for the cursor.</para></listitem>
<listitem><para><parameter>column</parameter> specifies the new column for the cursor.</para></listitem>
</itemizedlist>
<para>Sets the input cursor position to (<parameter>line</parameter>,
<parameter>column</parameter>). This sets the string position, that is a TAB
character counts for 1, and the cursor position is made visible. Both <parameter>line</parameter>
and <parameter>column</parameter> are zero-based.</para>
</listitem>
</varlistentry>

<varlistentry>
<term><function>view.setSelection(<parameter>uint startLine</parameter>,
<parameter>uint startColumn</parameter>, <parameter>uint endLine</parameter>,
<parameter>uint endColumn</parameter>) function</function></term>
<listitem>
<itemizedlist>
<title>Parameters</title>
<listitem><para><parameter>startLine</parameter> specifies the beginning line.</para></listitem>
<listitem><para><parameter>startColumn</parameter> specifies the beginning column.</para></listitem>
<listitem><para><parameter>endLine</parameter> specifies the ending line.</para></listitem>
<listitem><para><parameter>endColumn</parameter> specifies the ending column.</para></listitem>
</itemizedlist>
<para>Sets a selection from line <parameter>startLine</parameter> and column
<parameter>startColumn</parameter> to line <parameter>endLine</parameter>
and column <parameter>endColumn</parameter>.</para>
</listitem>
</varlistentry>

</variablelist>

<example id="advanced-editing-tools-scripting-example">

<title>A sample script</title>
<para>As an example we will create a small script that transforms the selected
text to upper case. We first need to check whether a selection exists: if so we
get the text, change the case and then replace the original text with the new one.
An implementation would look something like this:</para>

<programlisting>
if (view.hasSelection())
{
  // uppercase selection
  column = view.selectionStartColumn;
  line = view.selectionStartLine;

  selection = view.selection().toUpperCase();

  document.editBegin();
  view.removeSelectedText();
  document.insertText(line, column, selection);
  document.editEnd();
}
</programlisting>

<para>To group this actions together so that they will be reverted by a single
activation of <guimenuitem>Undo</guimenuitem>, we encapsulate the lines
<programlisting>
view.removeSelectedText()
document.insertText()
</programlisting> in a <emphasis>document.editBegin()</emphasis> -
<emphasis>document.editEnd()</emphasis> block.</para>

</example>

<example id="advanced-editing-tools-desktop-example">
<title>A sample <filename>.desktop</filename> file</title>

<para>Here is a sample .desktop file that accompanies the above script.</para>

<programlisting>
# Example of a .desktop file
[Desktop Entry]
Encoding=UTF-8
Name=Kate Part JavaScript Uppercase Script
Comment=Script to transform the selected text to upper case
X-Kate-Command=uppercase-selection
X-Kate-Help=&lt;p&gt;Usage: &lt;code&gt;uppercase-selection&lt;/code&gt;&lt;/p&gt;
</programlisting>

<para>As you can see you can define the Encoding, set a Name, a Comment, a help
text using X-Kate-Help and the command line name via X-Kate-Command.</para>

</example>

<sect3>
<title>Putting it all together</title>

<para>&kate; will search the script folders (see <link
linkend="advanced-editing-tools-scripting-introduction">above</link>)  for
<filename>.js</filename> files. For every such file found, &kate; will check 
whether there is a corresponding <filename>.desktop</filename> file with
the same basename (for example script.js and script.desktop).</para>
<para>If a corresponding <filename>.desktop</filename> file exists, the script
will be registered using the name from the .desktop entry <emphasis>X-Kate-Command</emphasis>.</para>
<para>If a corresponding <filename>.desktop</filename> file can not be found, the script will
be registered with the file basename (i.e. without the ending .js).
If you only need the command name and none of the extra features
that a <filename>.desktop</filename> file would provide, you do not need a
<filename>.desktop</filename> file at all.</para>

</sect3>

</sect2>

</sect1>

</chapter>