diff options
Diffstat (limited to 'dcopc/glib.m4')
| -rw-r--r-- | dcopc/glib.m4 | 196 |
1 files changed, 196 insertions, 0 deletions
diff --git a/dcopc/glib.m4 b/dcopc/glib.m4 new file mode 100644 index 00000000..b8094bbf --- /dev/null +++ b/dcopc/glib.m4 @@ -0,0 +1,196 @@ +# Configure paths for GLIB +# Owen Taylor 97-11-3 + +dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) +dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or +dnl gthread is specified in MODULES, pass to glib-config +dnl +AC_DEFUN(AM_PATH_GLIB, +[dnl +dnl Get the cflags and libraries from the glib-config script +dnl +AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)], + glib_config_prefix="$withval", glib_config_prefix="") +AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)], + glib_config_exec_prefix="$withval", glib_config_exec_prefix="") +AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program], + , enable_glibtest=yes) + + if test x$glib_config_exec_prefix != x ; then + glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix" + if test x${GLIB_CONFIG+set} != xset ; then + GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config + fi + fi + if test x$glib_config_prefix != x ; then + glib_config_args="$glib_config_args --prefix=$glib_config_prefix" + if test x${GLIB_CONFIG+set} != xset ; then + GLIB_CONFIG=$glib_config_prefix/bin/glib-config + fi + fi + + for module in . $4 + do + case "$module" in + gmodule) + glib_config_args="$glib_config_args gmodule" + ;; + gthread) + glib_config_args="$glib_config_args gthread" + ;; + esac + done + + AC_PATH_PROG(GLIB_CONFIG, glib-config, no) + min_glib_version=ifelse([$1], ,0.99.7,$1) + AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) + no_glib="" + if test "$GLIB_CONFIG" = "no" ; then + no_glib=yes + else + GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags` + GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs` + glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_glibtest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GLIB_CFLAGS" + LIBS="$GLIB_LIBS $LIBS" +dnl +dnl Now check if the installed GLIB is sufficiently new. (Also sanity +dnl checks the results of glib-config to some extent +dnl + rm -f conf.glibtest + AC_TRY_RUN([ +#include <glib.h> +#include <stdio.h> +#include <stdlib.h> + +int +main () +{ + int major, minor, micro; + char *tmp_version; + + system ("touch conf.glibtest"); + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = g_strdup("$min_glib_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_glib_version"); + exit(1); + } + + if ((glib_major_version != $glib_config_major_version) || + (glib_minor_version != $glib_config_minor_version) || + (glib_micro_version != $glib_config_micro_version)) + { + printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", + $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, + glib_major_version, glib_minor_version, glib_micro_version); + printf ("*** was found! If glib-config was correct, then it is best\n"); + printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n"); + printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); + printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); + printf("*** required on your system.\n"); + printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n"); + printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n"); + printf("*** before re-running configure\n"); + } + else if ((glib_major_version != GLIB_MAJOR_VERSION) || + (glib_minor_version != GLIB_MINOR_VERSION) || + (glib_micro_version != GLIB_MICRO_VERSION)) + { + printf("*** GLIB header files (version %d.%d.%d) do not match\n", + GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); + printf("*** library (version %d.%d.%d)\n", + glib_major_version, glib_minor_version, glib_micro_version); + } + else + { + if ((glib_major_version > major) || + ((glib_major_version == major) && (glib_minor_version > minor)) || + ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", + glib_major_version, glib_minor_version, glib_micro_version); + printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", + major, minor, micro); + printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); + printf("***\n"); + printf("*** If you have already installed a sufficiently new version, this error\n"); + printf("*** probably means that the wrong copy of the glib-config shell script is\n"); + printf("*** being found. The easiest way to fix this is to remove the old version\n"); + printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n"); + printf("*** correct copy of glib-config. (In this case, you will have to\n"); + printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); + printf("*** so that the correct libraries are found at run-time))\n"); + } + } + return 1; +} +],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_glib" = x ; then + AC_MSG_RESULT(yes) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$GLIB_CONFIG" = "no" ; then + echo "*** The glib-config script installed by GLIB could not be found" + echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the GLIB_CONFIG environment variable to the" + echo "*** full path to glib-config." + else + if test -f conf.glibtest ; then + : + else + echo "*** Could not run GLIB test program, checking why..." + CFLAGS="$CFLAGS $GLIB_CFLAGS" + LIBS="$LIBS $GLIB_LIBS" + AC_TRY_LINK([ +#include <glib.h> +#include <stdio.h> +], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding GLIB or finding the wrong" + echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" + echo "***" + echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" + echo "*** came with the system with the command" + echo "***" + echo "*** rpm --erase --nodeps gtk gtk-devel" ], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means GLIB was incorrectly installed" + echo "*** or that you have moved GLIB since it was installed. In the latter case, you" + echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + GLIB_CFLAGS="" + GLIB_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(GLIB_CFLAGS) + AC_SUBST(GLIB_LIBS) + rm -f conf.glibtest +]) |