summaryrefslogtreecommitdiffstats
path: root/kopete/INSTALL
diff options
context:
space:
mode:
authortoma <toma@283d02a7-25f6-0310-bc7c-ecb5cbfe19da>2009-11-25 17:56:58 +0000
committertoma <toma@283d02a7-25f6-0310-bc7c-ecb5cbfe19da>2009-11-25 17:56:58 +0000
commitbcb704366cb5e333a626c18c308c7e0448a8e69f (patch)
treef0d6ab7d78ecdd9207cf46536376b44b91a1ca71 /kopete/INSTALL
downloadtdenetwork-bcb704366cb5e333a626c18c308c7e0448a8e69f.tar.gz
tdenetwork-bcb704366cb5e333a626c18c308c7e0448a8e69f.zip
Copy the KDE 3.5 branch to branches/trinity for new KDE 3.5 features.
BUG:215923 git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/kdenetwork@1054174 283d02a7-25f6-0310-bc7c-ecb5cbfe19da
Diffstat (limited to 'kopete/INSTALL')
-rw-r--r--kopete/INSTALL239
1 files changed, 239 insertions, 0 deletions
diff --git a/kopete/INSTALL b/kopete/INSTALL
new file mode 100644
index 00000000..1eabc857
--- /dev/null
+++ b/kopete/INSTALL
@@ -0,0 +1,239 @@
+Basic Installation
+==================
+
+ These are generic installation instructions.
+
+ If you know how to build GNU autotools based packages using the
+common 'configure/make/make install' scheme, please read on below in
+the 'Finding Plugins' chapter.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+ The file `configure.in' is used to create `configure' by a program
+called `autoconf'. You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. You can give `configure'
+initial values for variables by setting them in the environment. Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+ CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+ env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory. After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on. Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+ CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+ If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+ Use and save the results of the tests in FILE instead of
+ `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ debugging `configure'.
+
+`--help'
+ Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made.
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--version'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+
+Finding Plugins
+===============
+If you don't see any "plugins" listed in the Configure Plugins...
+dialog, or the list of messaging protocols in the Add Account Wizard
+is empty after installing, Kopete you may have installed it in a
+directory where KDE doesn't look for additional resources like plugins.
+
+It's also possible that you've just been too impatient :)
+
+Kopete installs several .desktop files that have to be processed by a
+KDE application called 'kbuildsycoca'. If you run Kopete directly
+after installing it this process might still be running and Kopete
+doesn't see the new plugins yet. Try running 'kbuildsycoca' from a
+console and restart Kopete when it finishes. If that doesn't help,
+please read on.
+
+KDE applications by default look in all directories listed in the
+/etc/kderc file, the $KDEDIRS environment variable, in $KDEDIR if
+this variable doesn't exist, and ultimately in the directory where
+kdelibs is installed. Unless you take special precautions applications
+will _NOT_ look in other directories, even if you install additional
+software (like Kopete) there.
+
+The best solution is to add the following to /etc/kderc (create the file
+if it doesn't exist yet):
+
+ [Directories]
+ prefixes=/the/prefix/I/used/for/kopete
+
+If you don't have write access to /etc/kderc, or if you want to use more
+parallel builds of KDE and/or Kopete you need to rely on the environment
+variables instead.
+
+If $KDEDIRS currently points to /opt/kde3 and you installed Kopete
+to /usr/local then you need to set $KDEDIRS to '/opt/kde3:/usr/local'.
+You need to store this change in a file that is picked up by all shells
+and for all users, like /etc/profile. The name of the preferred version
+varies from system to system.
+
+As a last resort you can simply install Kopete in the same directory as
+where your KDE resides by adding a flag to configure like
+
+ ./configure --prefix=/opt/kde3
+
+if KDE is installed in /opt/kde3. The downside is that you'll probably
+end up installing Kopete into directories used by your distribution,
+instead of a separate path for your own packages like the /usr/local/
+tree. Whether or not your package manager has problems with that and
+whether or not you'll accept those problems should they occur is of
+course up to you to decide, but we strongly recommend to not install
+source-compiled packages like Kopete in directories that are managed
+by a package manager and only use the KDE prefix if you compiled all
+of KDE from source yourself.
+