Add man pages for TDE applications

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

73 files changed, 3436 insertions, 13 deletions

diff --git a/doc/CMakeLists.txt b/doc/CMakeLists.txt
index df842e47..af656c0a 100644
--- a/doc/CMakeLists.txt
+++ b/doc/CMakeLists.txt
@@ -1,12 +1,13 @@
-#################################################
-#
-#  (C) 2010-2011 Serghei Amelian
-#  serghei (DOT) amelian (AT) gmail.com
-#
-#  Improvements and feedback are welcome
-#
-#  This file is released under GPL >= 2
-#
-#################################################
+add_subdirectory( man )
 
-tde_auto_add_subdirectories( )
+tde_conditional_add_subdirectory( BUILD_CERVISIA cervisia )
+#tde_conditional_add_subdirectory( BUILD_KAPPTEMPLATE kapptemplate )
+tde_conditional_add_subdirectory( BUILD_KBABEL kbabel )
+tde_conditional_add_subdirectory( BUILD_KBUGBUSTER kbugbuster )
+tde_conditional_add_subdirectory( BUILD_KOMPARE kompare )
+tde_conditional_add_subdirectory( BUILD_KUIVIEWER kuiviewer )
+tde_conditional_add_subdirectory( BUILD_SCRIPTS scripts )
+tde_conditional_add_subdirectory( BUILD_TDECACHEGRIND tdecachegrind )
+# tdesvn-build is under the script folder
+tde_conditional_add_subdirectory( BUILD_SCRIPTS tdesvn-build )
+tde_conditional_add_subdirectory( BUILD_UMBRELLO umbrello )
diff --git a/doc/kapptemplate/Makefile.am b/doc/kapptemplate/Makefile.am
deleted file mode 100644
index 07fc0b90..00000000
--- a/doc/kapptemplate/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-KDE_LANG=en
-KDE_MANS=AUTO
diff --git a/doc/man/CMakeLists.txt b/doc/man/CMakeLists.txt
new file mode 100644
index 00000000..a44506d4
--- /dev/null
+++ b/doc/man/CMakeLists.txt
@@ -0,0 +1,12 @@
+tde_conditional_add_subdirectory( BUILD_CERVISIA cervisia )
+tde_conditional_add_subdirectory( BUILD_KAPPTEMPLATE kapptemplate )
+tde_conditional_add_subdirectory( BUILD_KBABEL kbabel )
+tde_conditional_add_subdirectory( BUILD_KBUGBUSTER kbugbuster )
+tde_conditional_add_subdirectory( BUILD_KMTRACE kmtrace )
+tde_conditional_add_subdirectory( BUILD_KOMPARE kompare )
+tde_conditional_add_subdirectory( BUILD_KSPY kspy )
+tde_conditional_add_subdirectory( BUILD_KUIVIEWER kuiviewer )
+tde_conditional_add_subdirectory( BUILD_POXML poxml )
+tde_conditional_add_subdirectory( BUILD_SCRIPTS scripts )
+tde_conditional_add_subdirectory( BUILD_TDECACHEGRIND tdecachegrind )
+tde_conditional_add_subdirectory( BUILD_UMBRELLO umbrello )
diff --git a/doc/man/cervisia/CMakeLists.txt b/doc/man/cervisia/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/cervisia/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/cervisia/cvsaskpass.1 b/doc/man/cervisia/cvsaskpass.1
new file mode 100644
index 00000000..d4b7e5df
--- /dev/null
+++ b/doc/man/cervisia/cvsaskpass.1
@@ -0,0 +1,63 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSASKPASS 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsaskpass \- prompt for a password for the CVS DCOP service
+.SH SYNOPSIS
+.B cvsaskpass
+.RI "[ " generic-options " ]"
+.I prompt
+.SH DESCRIPTION
+This utility displays a dialog box prompting the user for the password to
+a CVS repository, then writes the password to standard output and exits.
+You should not need to run this program directly \- it is designed for
+the internal use of
+.BR cvsservice (1).
+.PP
+The prompt should be of the following form:
+.RS
+.PP
+\fIuser\fP@\fIhost\fP's password:
+.RE
+.PP
+This will allow the dialog box to display the details of the CVS
+repository to the user.
+.PP
+This utility is part of the CVS service provided with Cervisia, which in
+turn is part of the TDE Software Development Kit.
+.SH OPTIONS
+For a full summary of options, run \fIcvsaskpass \-\-help\fP.
+.SH RETURN VALUE
+If a password was succefully obtained, 0 is returned.  If no prompt was
+supplied on the command-line or if the dialog was cancelled, 1 is returned.
+.SH SEE ALSO
+.BR cervisia (1),
+.BR cvsservice (1),
+.BR dcop (1).
+.PP
+Details of how to use the CVS service from within another script or C++
+program can be found in \fI/usr/share/doc/libcvsservice0/DESIGN\fP.
+.SH AUTHOR
+The CVS service was written by Christian Loose <christian.loose@kdemail.net>.
+.br
+Cervisia was written by Bernd Gehrmann <bernd@physik.hu-berlin.de>,
+Christian Loose <christian.loose@kdemail.net>,
+Andre Woebbeking <woebbeking@web.de>,
+Carlos Woelz <carloswoelz@imap-mail.com> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/cervisia/cvsservice.1 b/doc/man/cervisia/cvsservice.1
new file mode 100644
index 00000000..9d5c791d
--- /dev/null
+++ b/doc/man/cervisia/cvsservice.1
@@ -0,0 +1,79 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSSERVICE 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsservice \- a DCOP service for accessing CVS repositories
+.SH SYNOPSIS
+.B cvsservice
+.RI "[ " generic-options " ]"
+.SH DESCRIPTION
+The CVS service is a DCOP service for accessing and working with
+remote CVS repositories.  Applications may link with this library to
+access the DCOP service directly from C++.  Alternatively, scripts may
+access the service using the standard
+.BR dcop (1)
+command-line tool.
+.PP
+DCOP is the Desktop Communication Protocol used throughout TDE.
+.PP
+The CVS DCOP service consists of the following three parts:
+.TP
+\fBCvsService\fP
+The main interface to the functionality of the
+.BR cvs (1)
+command line client.  There is one method for each CVS command, e.g., add,
+checkout, commit, etc.  The methods assemble the command line
+arguments, create a CvsJob and return a DCOPRef object for it
+to the caller.  There is one instance of this service for each
+application instance.
+.TP
+\fBRepository\fP
+This DCOPObject manages the configuration data of the current
+CVS repository.  The data is automatically updated when other
+service instances change it.
+.TP
+\fBCvsJob\fP
+This class represents a CVS job.  You can execute and cancel it,
+and you can retrieve the output of the cvs client by either
+connecting to the proper DCOP signals or by using the output()
+method.  There are two types of jobs.  First the non-concurrent
+job which has to run alone, like cvs update or import.  Second
+the jobs which can run concurrently like cvs log or annotate.
+.PP
+The CVS service is provided with Cervisia, which is part of the TDE
+Software Development Kit.
+.SH OPTIONS
+For a full summary of options, run \fIcvsservice \-\-help\fP.
+.SH SEE ALSO
+.BR cervisia (1),
+.BR cvs (1),
+.BR cvsaskpass (1),
+.BR dcop (1).
+.PP
+Details of how to use the CVS service from within a shell script, a C++
+program or through the JavaScript bindings can be found in
+\fI/usr/share/doc/libcvsservice0/DESIGN\fP.
+.SH AUTHOR
+The CVS service was written by Christian Loose <christian.loose@kdemail.net>.
+.br
+Cervisia was written by Bernd Gehrmann <bernd@physik.hu-berlin.de>,
+Christian Loose <christian.loose@kdemail.net>,
+Andre Woebbeking <woebbeking@web.de>,
+Carlos Woelz <carloswoelz@imap-mail.com> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kapptemplate/CMakeLists.txt b/doc/man/kapptemplate/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/kapptemplate/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/kapptemplate/kapptemplate.1 b/doc/man/kapptemplate/kapptemplate.1
new file mode 100644
index 00000000..1010ecd5
--- /dev/null
+++ b/doc/man/kapptemplate/kapptemplate.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KAPPTEMPLATE 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kapptemplate \- creates a framework to develop a TDE application
+.SH SYNOPSIS
+.B kapptemplate
+[ \fB\-\-noinit\fP ] [ \fB\-\-default\fP ]
+.RB "[ " \-\-full\-app " | " \-\-kpart\-app " | " \-\-kpart\-plugin
+.RB " | " \-\-existing " ]"
+.PP
+.B kapptemplate \-\-help
+.SH DESCRIPTION
+\fBKAppTemplate\fP is a shell script that will create the necessary
+framework to develop various TDE applications.  It takes care of the
+autoconf/automake code as well as providing a skeleton and example of
+what the code typically looks like.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.SS General Options
+.TP
+\-\-help
+Display a full summary of options.
+.TP
+\-\-noinit
+Don't run 'make \-f Makefile.cvs'.
+.TP
+\-\-default
+Use default values instead of prompting.
+.SS Framework Types
+.TP
+\-\-full\-app
+Create a full featured TDE application.
+.TP
+\-\-kpart\-app
+Create a full featured KPart application.
+.TP
+\-\-kpart\-plugin
+Create a KPart plugin framework.
+.TP
+\-\-existing
+Converting existing source to an automake/autoconf TDE framework.
+.SH FILES
+.TP
+.I ~/.kapptemplate
+Stores default values.
+.SH SEE ALSO
+The original documentation from the program author
+is available in \fI/usr/share/doc/kapptemplate/\fP.
+.SH AUTHOR
+KAppTemplate was written by Kurt Granroth <granroth@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kbabel/CMakeLists.txt b/doc/man/kbabel/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/kbabel/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/kbabel/catalogmanager.1 b/doc/man/kbabel/catalogmanager.1
new file mode 100644
index 00000000..db8b1761
--- /dev/null
+++ b/doc/man/kbabel/catalogmanager.1
@@ -0,0 +1,66 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CATALOGMANAGER 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+catalogmanager \- advanced catalog manager for KBabel
+.SH SYNOPSIS
+.B catalogmanager
+.RI "[ " generic-options " ]"
+[ \fB\-\-project\fP \fIconfig-file\fP ]
+.SH DESCRIPTION
+\fBCatalogManager\fP is part of a suite of programs for editing gettext
+message files (PO-files).  This suite is designed to help you translate fast
+and consistently.
+.PP
+This suite includes KBabel, CatalogManager and KBabelDict.  KBabel is an
+advanced and easy to use PO-file editor with full navigational and editing
+capabilities, syntax checking and statistics.  CatalogManager (this program)
+is a multi functional catalog manager which allows you to keep track of many
+PO-files at once.  KBabelDict is a dictionary to assist with searching
+for common translations.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+Below are the catalogmanager-specific options.
+For a full summary of options, run \fIcatalogmanager \-\-help\fP.
+.TP
+\fB\-\-project\fP \fIconfig-file\fP
+Load the configuration from the given file.
+.SH SEE ALSO
+.BR kbabel (1),
+.BR kbabeldict (1).
+.PP
+Full user documentation for KBabel is available through the TDE Help Centre.
+You can also enter the URL
+\fIhelp:/kbabel/\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kbabel/\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdesdk-doc-html\fP and read this documentation in HTML format from
+\fI/usr/share/doc/tde/HTML/en/kbabel/\fP.
+.SH AUTHOR
+KBabel was written by Matthias Kiefer <kiefer@kde.org>,
+Wolfram Diestel <wolfram@steloj.de>, Andrea Rizzi <rizzi@kde.org>,
+Stanislav Visnovsky <visnovsky@kde.org>, Marco Wegner <dubbleu@web.de>,
+Asgeir Frimannsson <asgeirf@redhat.com>,
+Dwayne Bailey <dwayne@translate.org.za>,
+Bram Schoenmakers <bramschoenmakers@kde.nl> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kbabel/kbabel.1 b/doc/man/kbabel/kbabel.1
new file mode 100644
index 00000000..047e3626
--- /dev/null
+++ b/doc/man/kbabel/kbabel.1
@@ -0,0 +1,74 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KBABEL 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kbabel \- a PO-file editor for TDE
+.SH SYNOPSIS
+.B kbabel
+.RI "[ " generic-options " ]"
+[ \fB\-\-gotomsgid\fP \fImsgid\fP ] [ \fB\-\-nosplash\fP ]
+[ \fB\-\-project\fP \fIconfig-file\fP ]
+.RI "[ " file " ]"
+.SH DESCRIPTION
+\fBKBabel\fP is part of a suite of programs for editing gettext message
+files (PO-files).  It is designed to help you translate fast and
+consistently.
+.PP
+This suite includes KBabel, CatalogManager and KBabelDict.  KBabel (this
+program) is an advanced and easy to use PO-file editor with full navigational
+and editing capabilities, syntax checking and statistics.  CatalogManager is
+a multi functional catalog manager which allows you to keep track of many
+PO-files at once.  KBabelDict is a dictionary to assist with searching
+for common translations.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+Below are the kbabel-specific options.
+For a full summary of options, run \fIkbabel \-\-help\fP.
+.TP
+\fB\-\-gotomsgid\fP \fImsgid\fP
+Go to the entry with the given message ID.
+.TP
+.B \-\-nosplash
+Disable splashscreen at startup.
+.TP
+\fB\-\-project\fP \fIconfig-file\fP
+Load the configuration from the given file.
+.SH SEE ALSO
+.BR catalogmanager (1),
+.BR kbabeldict (1).
+.PP
+Full user documentation is available through the TDE Help Centre.
+You can also enter the URL
+\fIhelp:/kbabel/\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kbabel/\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdesdk-doc-html\fP and read this documentation in HTML format from
+\fI/usr/share/doc/tde/HTML/en/kbabel/\fP.
+.SH AUTHOR
+KBabel was written by Matthias Kiefer <kiefer@kde.org>,
+Wolfram Diestel <wolfram@steloj.de>, Andrea Rizzi <rizzi@kde.org>,
+Stanislav Visnovsky <visnovsky@kde.org>, Marco Wegner <dubbleu@web.de>,
+Asgeir Frimannsson <asgeirf@redhat.com>,
+Dwayne Bailey <dwayne@translate.org.za>,
+Bram Schoenmakers <bramschoenmakers@kde.nl> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kbabel/kbabeldict.1 b/doc/man/kbabel/kbabeldict.1
new file mode 100644
index 00000000..ffd9b465
--- /dev/null
+++ b/doc/man/kbabel/kbabeldict.1
@@ -0,0 +1,66 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KBABELDICT 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kbabeldict \- the KBabel dictionary for translators
+.SH SYNOPSIS
+.B kbabeldict
+.RI "[ " generic-options " ]"
+.RB "[ " \-\-nosplash " ]"
+.SH DESCRIPTION
+\fBKBabelDict\fP is part of a suite of programs for editing gettext message
+files (PO-files).  This suite is designed to help you translate fast and
+consistently.
+.PP
+This suite includes KBabel, CatalogManager and KBabelDict.  KBabel is an
+advanced and easy to use PO-file editor with full navigational and editing
+capabilities, syntax checking and statistics.  CatalogManager is a multi
+functional catalog manager which allows you to keep track of many
+PO-files at once.  KBabelDict (this program) is a dictionary to assist
+with searching for common translations.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+Below are the kbabeldict-specific options.
+For a full summary of options, run \fIkbabeldict \-\-help\fP.
+.TP
+.B \-\-nosplash
+Disable splashscreen at startup.
+.SH SEE ALSO
+.BR kbabel (1),
+.BR catalogmanager (1).
+.PP
+Full user documentation for KBabel is available through the TDE Help Centre.
+You can also enter the URL
+\fIhelp:/kbabel/\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/kbabel/\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdesdk-doc-html\fP and read this documentation in HTML format from
+\fI/usr/share/doc/tde/HTML/en/kbabel/\fP.
+.SH AUTHOR
+KBabel was written by Matthias Kiefer <kiefer@kde.org>,
+Wolfram Diestel <wolfram@steloj.de>, Andrea Rizzi <rizzi@kde.org>,
+Stanislav Visnovsky <visnovsky@kde.org>, Marco Wegner <dubbleu@web.de>,
+Asgeir Frimannsson <asgeirf@redhat.com>,
+Dwayne Bailey <dwayne@translate.org.za>,
+Bram Schoenmakers <bramschoenmakers@kde.nl> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kbugbuster/CMakeLists.txt b/doc/man/kbugbuster/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/kbugbuster/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/kbugbuster/kbugbuster.1 b/doc/man/kbugbuster/kbugbuster.1
new file mode 100644
index 00000000..29b9c38d
--- /dev/null
+++ b/doc/man/kbugbuster/kbugbuster.1
@@ -0,0 +1,50 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KBUGBUSTER 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kbugbuster \- front end for the TDE bug tracking system
+.SH SYNOPSIS
+.B kbugbuster
+.RI "[ " generic-options " ]"
+[ \fB\-d, \-\-disconnected\fP ]
+[ \fB\-\-pkg, \-\-package\fP \fIpkg\fP ]
+[ \fB\-\-bug\fP \fInumber\fP ]
+.SH DESCRIPTION
+\fBKBugBuster\fP is a GUI front end for the TDE bug tracking system.
+It allows the user to view and manipulate bug reports and provides a
+variety of options for searching through reports.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+Below are the kbugbuster-specific options.
+For a full summary of options, run \fIkbugbuster \-\-help\fP.
+.TP
+[ \fB\-d, \-\-disconnected\fP ]
+Start in disconnected mode.
+.TP
+[ \fB\-\-pkg, \-\-package\fP \fIpkg\fP ]
+Start with the bug list for the given package.
+.TP
+[ \fB\-\-bug\fP \fInumber\fP ]
+Start with the given bug report.
+.SH AUTHOR
+KBugBuster was written by Martijn Klingens <klingens@kde.org>,
+Simon Hausmann <hausmann@kde.org>, Cornelius Schumacher <schumacher@kde.org>
+and David Faure <faure@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kmtrace/CMakeLists.txt b/doc/man/kmtrace/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/kmtrace/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/kmtrace/demangle.1 b/doc/man/kmtrace/demangle.1
new file mode 100644
index 00000000..8f4f3922
--- /dev/null
+++ b/doc/man/kmtrace/demangle.1
@@ -0,0 +1,57 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH DEMANGLE 1 "February 25, 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+demangle \- undo C++ name mangling for symbols
+.SH SYNOPSIS
+.B demangle
+.SH DESCRIPTION
+\fBDemangle\fP reads a list of C++ mangled symbol names from standard
+input and converts these names to human-readable form on standard
+output.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH EXAMPLE
+Create a file called \fInames\fP containing the following mangled symbol
+names:
+.PP
+.RS
+_ZNK6Object10metaObjectEv
+.br
+_ZN8QPtrListI5ArrowE5clearEv
+.br
+_ZTC4Kolf0_11TDEMainWindow
+.RE
+.PP
+These names can then be demangled as follows:
+.PP
+.RS
+\fIexample$\fP demangle < names
+.br
+Object::metaObject() const
+.br
+QPtrList<Arrow>::clear()
+.br
+construction vtable for TDEMainWindow-in-Kolf
+.RE
+.SH SEE ALSO
+.BR kminspector (1),
+.BR kmmatch (1),
+.BR kmtrace (1).
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kmtrace/kminspector.1 b/doc/man/kmtrace/kminspector.1
new file mode 100644
index 00000000..29cb70e5
--- /dev/null
+++ b/doc/man/kmtrace/kminspector.1
@@ -0,0 +1,50 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KMINSPECTOR 1 "February 25, 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kminspector \- run a program with the TDE memory leak tracer
+.SH SYNOPSIS
+.B kminspector
+\fIprogram\fP [ \fIprogram-args\fP ]
+.SH DESCRIPTION
+\fBKMinspector\fP runs the given program, examines its memory
+allocation behaviour using \fIlibktrace\fP and pipes the resulting
+allocation tree through \fIless\fP.
+.PP
+The given program does not need to be specially compiled.
+.PP
+This utility is provided with KMtrace,
+a TDE tool to assist with malloc debugging using
+glibc's "mtrace" functionality. Unfortunately the mtrace that is part of
+current (9/9/2000) glibc versions only logs the return-address of the
+malloc/free call. The library included with KMtrace
+logs a complete backtrace upon malloc/free.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR demangle (1),
+.BR kmmatch (1),
+.BR kmtrace (1).
+.PP
+Much more extensive documentation for KMtrace can be found in
+\fI/usr/share/doc/kmtrace/README\fP.
+.SH AUTHOR
+KMtrace was written by Waldo Bastian <bastian@kde.org>,
+Mike Haertel <mike@ai.mit.edu> and Andi Kleen <ak@suse.de>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kmtrace/kmmatch.1 b/doc/man/kmtrace/kmmatch.1
new file mode 100644
index 00000000..d80c1554
--- /dev/null
+++ b/doc/man/kmtrace/kmmatch.1
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KMMATCH 1 "February 26, 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kmmatch \- search for symbols in a map file
+.SH SYNOPSIS
+.B kmmatch
+.I map-file call-file
+.SH DESCRIPTION
+\fBKMMatch\fP determines which symbols from a given set (\fIcall-file\fP) are
+present in a given map file.
+.PP
+The \fImap-file\fP should contain output from \fInm\fP (which extracts
+information from object files).  It must \fBnot\fP contain any blank
+lines or header information (such as the name of the object file); this
+means you may need to strip the first few lines of \fInm\fP output from
+the \fImap-file\fP.
+.PP
+The \fIcall-file\fP should contain a list of symbols (such as function
+calls made by a program), one per line.
+.PP
+This utility will find which of the symbols in \fIcall-file\fP are
+present in \fImap-file\fP and write them to standard error, one per
+line, in the order in which they appear in \fIcall-file\fP.
+.PP
+Note that this utility is called \fBmatch\fP in the original TDE
+distribution; it has been renamed to \fBkmmatch\fP in Debian to
+avoid conflicts with unrelated packages.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR demangle (1),
+.BR kminspector (1),
+.BR kmtrace (1),
+.BR nm (1).
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kmtrace/kmtrace.1 b/doc/man/kmtrace/kmtrace.1
new file mode 100644
index 00000000..14f5f9fc
--- /dev/null
+++ b/doc/man/kmtrace/kmtrace.1
@@ -0,0 +1,72 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KMTRACE 1 "February 25, 2003"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kmtrace \- a TDE memory leak tracer
+.SH SYNOPSIS
+.B kmtrace
+[ \fIgeneric-options\fP ]
+[ \fB\-x, \-\-exclude\fP \fIfile\fP ]
+[ \fB\-e, \-\-exe\fP \fIfile\fP ]
+[ \fB\-t, \-\-tree\fP \fIfile\fP
+[ \fB\-\-th, \-\-treethreshold\fP \fIvalue\fP ]
+[ \fB\-\-td, \-\-treedepth\fP \fIvalue\fP ]]
+[ \fItrace-log\fP ]
+.SH DESCRIPTION
+\fBKMtrace\fP is a TDE tool to assist with malloc debugging using
+glibc's "mtrace" functionality. Unfortunately the mtrace that is part of
+current (9/9/2000) glibc versions only logs the return-address of the
+malloc/free call. The library included with KMtrace
+logs a complete backtrace upon malloc/free.
+.PP
+KMtrace will investigate the trace log specified on the command line,
+or \fIktrace.out\fP if no trace log is specified.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+Below are the kmtrace-specific options.
+For a full summary of options, run \fIkmtrace \-\-help\fP.
+.TP
+\fB\-x, \-\-exclude\fP \fIfile\fP
+File containing symbols to exclude from output.
+.TP
+\fB\-e, \-\-exe\fP \fIfile\fP
+Executable to use for looking up unknown symbols.
+.TP
+\fB\-t, \-\-tree\fP \fIfile\fP
+Write a tree of the allocations to the given file.
+.TP
+\fB\-\-th, \-\-treethreshold\fP \fIvalue\fP
+When writing the allocations tree, hide subtrees allocating less than the
+given memory amount.
+.TP
+\fB\-\-td, \-\-treedepth\fP \fIvalue\fP
+When writing the allocations tree, hide subtrees that are deeper than the
+specified depth.
+.SH SEE ALSO
+.BR demangle (1),
+.BR kminspector (1),
+.BR kmmatch (1).
+.PP
+Much more extensive documentation can be found in
+\fI/usr/share/doc/kmtrace/README\fP.
+.SH AUTHOR
+KMtrace was written by Waldo Bastian <bastian@kde.org>,
+Mike Haertel <mike@ai.mit.edu> and Andi Kleen <ak@suse.de>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kompare/CMakeLists.txt b/doc/man/kompare/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/kompare/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/kompare/kompare.1 b/doc/man/kompare/kompare.1
new file mode 100644
index 00000000..e777752e
--- /dev/null
+++ b/doc/man/kompare/kompare.1
@@ -0,0 +1,79 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KOMPARE 1 "March 25, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kompare \- a TDE GUI for viewing differences between files
+.SH SYNOPSIS
+.B kompare
+[ \fIgeneric-options\fP ]
+.br
+.B kompare
+[ \fIgeneric-options\fP ] [ \fB\-c\fP ] \fIURL1 URL2\fP
+.br
+.B kompare
+[ \fIgeneric-options\fP ] [ \fB\-o\fP [ \fB\-n\fP ]] \fIdiff\fP
+.br
+.B kompare
+[ \fIgeneric-options\fP ] \fB\-b\fP \fIURL diff\fP
+.SH DESCRIPTION
+\fBKompare\fP is a graphical user interface for viewing the differences
+between two files.  It will also optionally create a diff file.
+.PP
+Depending upon what is passed on the command line, Kompare can compare
+documents, display diff files and blend diff files back into original
+documents.
+.PP
+If an url is given as - then Kompare will read the corresponding file
+from standard input.  Thus (for instance) Kompare can be used as:
+.PP
+.RS
+cvs diff | kompare \-o \-
+.RE
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+Below are the kompare-specific options.
+For a full summary of options, run \fIkompare \-\-help\fP.
+.TP
+\fB\-b\fP \fIURL diff\fP
+Blends \fIdiff\fP into URL.  \fIdiff\fP is expected to be diff output and
+\fIURL\fP the file or folder that the diff output needs to be blended into.
+.TP
+\fB\-c\fP \fIURL1 URL2\fP
+Compares \fIURL1\fP with \fIURL2\fP.  This is the default mode if two
+URLs are passed.
+.TP
+\fB\-n\fP
+Used with \fB\-o\fP to stop Kompare from checking for the original file.
+.TP
+\fB\-o\fP \fIdiff\fP
+Opens the given diff file.  This is the default mode if only one URL is
+passed.
+.br
+Kompare will check to see if it can find
+the original file(s).  If it can, it will blend the original file(s) into
+the diff output and show the result in the viewer.  Passing \fB\-n\fP
+will disable this check.
+.SH SEE ALSO
+The original documentation from the program author
+is available in \fI/usr/share/doc/kompare/\fP.
+.SH AUTHOR
+Kompare was written by John Firebaugh <jfirebaugh@kde.org>,
+Otto Bruggeman <otto.bruggeman@home.nl> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kspy/CMakeLists.txt b/doc/man/kspy/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/kspy/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/kspy/testkspy.1 b/doc/man/kspy/testkspy.1
new file mode 100644
index 00000000..afdc702a
--- /dev/null
+++ b/doc/man/kspy/testkspy.1
@@ -0,0 +1,46 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH TESTKSPY 1 "May 3, 2001"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+testkspy \- show off KSpy's capabilities
+.SH SYNOPSIS
+.B testkspy
+.RI "[ " generic-options " ]"
+.SH DESCRIPTION
+\fBtestkspy\fP is a small application that shows off KSpy's capabilities.
+It simply uses KSpy to spy on itself.
+.PP
+\fBKSpy\fP is a tiny library which can be used to graphically display
+the TQObjects in use by a TQt/TDE app.  In addition to the object tree,
+you can also view the properties, signals and slots of any QObject.
+.PP
+Basically it provides much the same info as QObject::dumpObjectTree() and
+QObject::dumpObjectInfo(), but in a much more convenient form.  KSpy has
+minimal overhead for the application, because the kspy library is
+loaded dynamically using KLibLoader.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+For a full summary of options, run \fItestkspy \-\-help\fP.
+.SH SEE ALSO
+Instructions on using KSpy with your own applications can be found in
+\fI/usr/share/doc/kspy/README\fP.
+.SH AUTHOR
+KSpy was written by Richard Moore <rich@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/kuiviewer/CMakeLists.txt b/doc/man/kuiviewer/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/kuiviewer/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/kuiviewer/kuiviewer.1 b/doc/man/kuiviewer/kuiviewer.1
new file mode 100644
index 00000000..5439127a
--- /dev/null
+++ b/doc/man/kuiviewer/kuiviewer.1
@@ -0,0 +1,65 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KUIVIEWER 1 "March 25, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kuiviewer \- a viewer for Qt Designer user interface files
+.SH SYNOPSIS
+.B kuiviewer
+.RI "[ " generic-options " ]"
+.RI "[ " ui-file ... " ]"
+.PP
+.B kuiviewer
+.RI "[ " generic-options " ]"
+{ \fB\-s, \-\-takescreenshot\fP \fIfilename\fP }
+[ \fB\-w, \-\-screenshotwidth\fP \fIint\fP ]
+[ \fB\-h, \-\-screenshotheight\fP \fIint\fP ]
+.I ui-file
+.SH DESCRIPTION
+\fBKUIViewer\fP is a utility to display and test the user interface (.ui)
+files generated by \fBQt Designer\fP.  The interfaces can be displayed in a
+variety of different widget styles.
+.PP
+Normally KUIViewer launches a full GUI, allowing the user to interact with
+the given interface.
+By passing the \fB\-\-takescreenshot\fP option, you can make KUIViewer dump a
+screenshot of the interface instead and exit immediately.  Other options
+are available to control precisely how this screenshot is constructed.
+.PP
+This application is part of the TDE Software Development Kit.
+.SH OPTIONS
+Below are the kuiviewer-specific options.
+For a full summary of options, run \fIkuiviewer \-\-help\fP.
+.TP
+\fB\-s, \-\-takescreenshot\fP \fIfilename\fP
+Take a screenshot of the given interface and exit immediately.
+The \fIfilename\fP argument specifies where the screenshot will be saved.
+This screenshot will be saved in PNG format.
+.TP
+\fB\-w, \-\-screenshotwidth\fP \fIint\fP
+Before taking a screenshot, resize the interface to the given width.
+.TP
+\fB\-h, \-\-screenshotheight\fP \fIint\fP
+Before taking a screenshot, resize the interface to the given height.
+.SH SEE ALSO
+.BR designer (1).
+.SH AUTHOR
+KUIViewer was written by Richard Moore <rich@kde.org>,
+Ian Reinhart Geiser <geiseri@kde.org> and
+Benjamin C. Meyer <ben+kuiviewer@meyerhome.net>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/poxml/CMakeLists.txt b/doc/man/poxml/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/poxml/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/poxml/po2xml.1 b/doc/man/poxml/po2xml.1
new file mode 100644
index 00000000..d2f7fe5d
--- /dev/null
+++ b/doc/man/poxml/po2xml.1
@@ -0,0 +1,40 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH PO2XML 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+po2xml \- translates a DocBook XML file using a PO-file
+.SH SYNOPSIS
+.B po2xml
+.I original-XML translated-PO
+.SH DESCRIPTION
+\fBpo2xml\fP is a command-line tool that translates the DocBook
+XML file \fIoriginal-XML\fP using the gettext message file
+\fItranslated-PO\fP.  The resulting translated XML file is sent to standard
+output.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR split2po (1),
+.BR swappo (1),
+.BR transxx (1),
+.BR xml2pot (1).
+.SH AUTHOR
+The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
+Peter Wells <pete@yamuna.demon.co.uk>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/poxml/split2po.1 b/doc/man/poxml/split2po.1
new file mode 100644
index 00000000..539e2f6c
--- /dev/null
+++ b/doc/man/poxml/split2po.1
@@ -0,0 +1,60 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH SPLIT2PO 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+split2po \- creates a PO-file from two DocBook XML files
+.SH SYNOPSIS
+.B split2po
+.I original-XML translated-XML
+.SH DESCRIPTION
+\fBsplit2po\fP is a command-line tool that takes the two given DocBook
+XML files and produces a gettext message file (PO-file) that represents
+the changes between them.  The resulting PO-file is sent to standard
+output.
+.PP
+.I translated-XML
+must be the result of translating
+.I original-XML
+into another language.  It is this translation that the resulting
+PO-file will represent.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH ENVIRONMENT VARIABLES
+.TP
+NO_CREDITS
+If set, the "ROLES_OF_TRANSLATORS" and "CREDIT_FOR_TRANSLATORS" messages
+will be omitted.  By default these are always included at the end of
+the PO-file, with empty message strings.
+.br
+These messages are used with TDE documentation, so you may wish to set
+NO_CREDITS if you are working with some other type of non-TDE documentation.
+.TP
+REPORT_MISMATCHES
+Set this variable to "no" if you wish mismatch reporting to be
+suppressed.  By default, any apparent mismatches between the two XML
+files will be noted on standard error.
+.SH SEE ALSO
+.BR po2xml (1),
+.BR swappo (1),
+.BR transxx (1),
+.BR xml2pot (1).
+.SH AUTHOR
+The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
+Peter Wells <pete@yamuna.demon.co.uk>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/poxml/swappo.1 b/doc/man/poxml/swappo.1
new file mode 100644
index 00000000..bb1289d9
--- /dev/null
+++ b/doc/man/poxml/swappo.1
@@ -0,0 +1,44 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH SWAPPO 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+swappo \- swap msgid and msgstr fields in a PO-file
+.SH SYNOPSIS
+.B swappo
+.I PO-file
+.SH DESCRIPTION
+\fBswappo\fP reads the given PO-file and swaps the \fImsgid\fP and
+\fImsgstr\fP fields for every message.  The result is a new PO-file that
+translates in the opposite direction.  For example, if \fIPO-file\fP
+translates from English to French, the new PO-file will translate from
+French to English.
+.PP
+The new PO-file will be written to standard output.  The old PO-file
+will remain untouched.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR po2xml (1),
+.BR split2po (1),
+.BR transxx (1),
+.BR xml2pot (1).
+.SH AUTHOR
+The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
+Peter Wells <pete@yamuna.demon.co.uk>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/poxml/transxx.1 b/doc/man/poxml/transxx.1
new file mode 100644
index 00000000..6dba2239
--- /dev/null
+++ b/doc/man/poxml/transxx.1
@@ -0,0 +1,47 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH TRANSXX 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+transxx \- create a basic fleshed-out PO-file from a PO-template file
+.SH SYNOPSIS
+.B transxx
+[ \fB\-\-text\fP \fItranslation\fP ]
+.I template
+.SH DESCRIPTION
+\fBtransxx\fP is a command-line tool that produces a basic fleshed-out
+PO-file from a PO-template file.  Some of the formatting and
+structure of the \fImsgid\fP strings will be copied to the \fImsgstr\fP
+strings, but otherwise text will be translated to "xx".
+.PP
+The fleshed-out PO-file is sent to standard output.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-\-text\fP \fItranslation\fP
+Use the given translation everywhere instead of "xx".
+.SH SEE ALSO
+.BR po2xml (1),
+.BR split2po (1),
+.BR swappo (1),
+.BR xml2pot (1).
+.SH AUTHOR
+The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
+Peter Wells <pete@yamuna.demon.co.uk>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/poxml/xml2pot.1 b/doc/man/poxml/xml2pot.1
new file mode 100644
index 00000000..0b1a293d
--- /dev/null
+++ b/doc/man/poxml/xml2pot.1
@@ -0,0 +1,45 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH XML2POT 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+xml2pot \- creates a PO-template file from a DocBook XML file
+.SH SYNOPSIS
+.B xml2pot
+.I original-XML
+.SH DESCRIPTION
+\fBxml2pot\fP is a command-line tool that produces a gettext message
+template file from the DocBook XML file \fIoriginal-XML\fP.
+The template file is sent to standard output.
+.PP
+The resulting template file can be used to create gettext message files
+(PO-files) for a variety of languages.  These can then be used in conjunction
+with
+.BR po2xml (1)
+to translate the original XML file into these other languages.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR po2xml (1),
+.BR split2po (1),
+.BR swappo (1),
+.BR transxx (1).
+.SH AUTHOR
+The PO-XML tools were written by Stephan Kulow <coolo@kde.org> and
+Peter Wells <pete@yamuna.demon.co.uk>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/CMakeLists.txt b/doc/man/scripts/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/scripts/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/scripts/adddebug.1 b/doc/man/scripts/adddebug.1
new file mode 100644
index 00000000..d78dad43
--- /dev/null
+++ b/doc/man/scripts/adddebug.1
@@ -0,0 +1,45 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH ADDDEBUG 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+adddebug \- modifies Makefile(s) to add debug info
+.SH SYNOPSIS
+.B adddebug
+.RB "[ " \-k " ] [ " \-n " ] [ " \-r " ]"
+.SH DESCRIPTION
+\fBadddebug\fP modifies the \fIMakefile\fP in the current directory
+(and optionally in its subdirectories) to add debug info (\fI\-g3\fP).
+It will also remove optimisations (\fI\-O[1-9]?\fP), and can optionally
+remove \fI\-DNDEBUG\fP and \fI\-DNO_DEBUG\fP as well.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+.B \-k
+Keep optimisations (do not remove \fI\-O[1-9]?\fP flags which are
+removed by default).
+.TP
+.B \-n
+Compile without \fINDEBUG\fP and \fINO_DEBUG\fP being defined (this
+makes kdDebug calls work).
+.TP
+.B \-r
+Recursively search through all subdirectories of the current directory
+and operate on every Makefile that is found.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/build-progress.sh.1 b/doc/man/scripts/build-progress.sh.1
new file mode 100644
index 00000000..28c9d901
--- /dev/null
+++ b/doc/man/scripts/build-progress.sh.1
@@ -0,0 +1,56 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH BUILD-PROGRESS.SH 1 "June 16, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+build-progress.sh \- show kde-build progress in your konsole/xterm title bar
+.SH SYNOPSIS
+.B build-progress.sh
+.SH DESCRIPTION
+\fBbuild-progress.sh\fP can be used to watch the progress of a large TDE
+build in the title bar of your konsole or xterm.
+.PP
+The TDE build must be running elsewhere as a separate process, and it
+must be done using
+.BR kde-build (1).
+.PP
+When you run build-progress.sh, it will sit in a permanent loop while
+kde-build runs.  The title bar of the konsole/xterm in which you ran
+build-progress.sh will be continually updated with the directory in
+which the TDE build is currently working.
+.PP
+You must run build-progress.sh from the top-level directory of the TDE
+build tree.  This directory must contain a file named
+\fIkde-buildrc\fP (which is also used by kde-build).  This
+\fIkde-buildrc\fP must contain valid settings for
+\fITDELOGDIR\fP and \fITDESRCDIR\fP, or else build-progress.sh will
+fail to work.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH FILES
+.TP
+\fIkde-buildrc\fP
+This file must be contained in the current directory, which must be the
+root of the TDE build tree.  See
+.BR kde-build (1)
+for further information.
+.SH SEE ALSO
+.BR kde-build (1).
+.SH AUTHOR
+build-progress.sh was written by Malte Starostik <malte@kde.org> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cheatmake.1 b/doc/man/scripts/cheatmake.1
new file mode 100644
index 00000000..098449a0
--- /dev/null
+++ b/doc/man/scripts/cheatmake.1
@@ -0,0 +1,72 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CHEATMAKE 1 "September 27, 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cheatmake \- fool make into not rebuilding certain files
+.SH SYNOPSIS
+.B cheatmake hidechange
+.I file
+.br
+.B cheatmake show
+.br
+.B cheatmake why
+.I file
+.SH DESCRIPTION
+\fBcheatmake\fP is used to save time when recompiling.  It can fool \fBmake\fP
+into skipping files that haven't changed in a meaningful way.  This can be
+used for instance when you change a comment in a file but none of the actual
+code.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+The different modes of operation are as follows.
+.TP
+\fBhidechange\fP \fIfile\fP
+Hides the fact that the given file has changed by moving its timestamp
+back into the past.  Use this option with care!
+.TP
+\fBshow\fP
+Lists which files make currently needs to rebuild.
+.TP
+\fBwhy\fP \fIfile\fP
+Explains why make must rebuild the given file.
+.SH ENVIRONMENT VARIABLES
+One of the following variables (but not both) should be set if the
+source
+directory is different from the build directory.
+If the build directory is simply a subdirectory of the source directory,
+the simpler variable OBJ_SUBDIR should be used.
+.TP
+OBJ_SUBDIR
+Indicates that the build directory is in the given subdirectory of the
+source directory.  For instance, if the source directory is \fItdesdk\fP
+and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
+should be set to \fIobj-i386-linux\fP.
+.TP
+OBJ_REPLACEMENT
+A \fBsed\fP expression that is used to transform the source directory
+into the build directory.
+For instance, if the source directory is \fI~/src/tdesdk\fP and the
+build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
+be set to \fIs#tdesdk#tdesdk-obj#\fP.
+.SH SEE ALSO
+.BR make (1).
+.SH AUTHOR
+cheatmake was written by David Faure <faure@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/create_cvsignore.1 b/doc/man/scripts/create_cvsignore.1
new file mode 100644
index 00000000..ce63f6f5
--- /dev/null
+++ b/doc/man/scripts/create_cvsignore.1
@@ -0,0 +1,42 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CREATE_CVSIGNORE 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+create_cvsignore \- creates preliminary .cvsignore in current directory
+.SH SYNOPSIS
+.B create_cvsignore
+[ \fB\-r\fP ]
+.SH DESCRIPTION
+\fBcreate_cvsignore\fP is used to create a preliminary \fI.cvsignore\fP
+file in the current directory.  It does this by adding some standard
+stuff according to what it finds in \fIMakefile.am\fP.
+.PP
+No lines will be removed from any existing \fI.cvsignore\fP.
+If there is not already a \fI.cvsignore\fP, it will be added to the CVS
+repository.
+.PP
+Note that you must have a \fIMakefile.am\fP in the current directory for
+this tool to work.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB-r\fP
+Recursively process this directory and all directories beneath it.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/create_makefile.1 b/doc/man/scripts/create_makefile.1
new file mode 100644
index 00000000..e128f23e
--- /dev/null
+++ b/doc/man/scripts/create_makefile.1
@@ -0,0 +1,69 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CREATE_MAKEFILE 1 "September 26, 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+create_makefile \- creates Makefile.in and Makefile from a Makefile.am
+.SH SYNOPSIS
+.B create_makefile
+.I relativepath/Makefile
+.br
+.B create_makefile
+.I relativepath
+.SH DESCRIPTION
+\fBcreate_makefile\fP creates the \fIMakefile.in\fP and \fIMakefile\fP
+in a subdirectory containing a \fIMakefile.am\fP.
+This script saves time compared to re-running configure completely.
+.PP
+Note that you must supply the path to the desired \fIMakefile\fP, not the
+existing \fIMakefile.am\fP (though the final \fI/Makefile\fP may be omitted).
+.PP
+This script may be run from the toplevel directory (the
+one containing \fIconfigure\fP) or from one of its subdirectories.
+Note that \fIrelativepath\fP must be a relative path, not an absolute path.
+.PP
+If the source directory is different from the build directory (see the
+environment variables below), it will be assumed that the \fIMakefile.am\fP
+and \fIMakefile.in\fP belong beneath the source directory and that the
+\fIMakefile\fP belongs beneath the build directory.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH ENVIRONMENT VARIABLES
+One of the following variables (but not both) should be set if the
+source
+directory is different from the build directory.
+If the build directory is simply a subdirectory of the source directory,
+the simpler variable OBJ_SUBDIR should be used.
+.TP
+OBJ_SUBDIR
+Indicates that the build directory is in the given subdirectory of the
+source directory.  For instance, if the source directory is \fItdesdk\fP
+and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
+should be set to \fIobj-i386-linux\fP.
+.TP
+OBJ_REPLACEMENT
+A \fBsed\fP expression that is used to transform the source directory
+into the build directory.
+For instance, if the source directory is \fI~/src/tdesdk\fP and the
+build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
+be set to \fIs#tdesdk#tdesdk-obj#\fP.
+.SH SEE ALSO
+.BR create_makefiles (1).
+.SH AUTHOR
+create_makefile was written by David Faure <faure@kde.org> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/create_makefiles.1 b/doc/man/scripts/create_makefiles.1
new file mode 100644
index 00000000..2efc0379
--- /dev/null
+++ b/doc/man/scripts/create_makefiles.1
@@ -0,0 +1,63 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CREATE_MAKEFILES 1 "September 27, 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+create_makefiles \- recreates all Makefiles beneath a directory
+.SH SYNOPSIS
+.B create_makefiles
+.I dir
+.SH DESCRIPTION
+\fBcreate_makefiles\fP recreates all \fIMakefile\fPs in
+\fIdir\fP and its (recursed) subdirectories from the corresponding
+\fIMakefile.am\fP templates.
+.PP
+This script must be run from the toplevel directory (the
+one containing \fIconfigure\fP).
+This script saves time compared to re-running configure completely.
+.PP
+If the source directory is different from the build directory (see the
+environment variables below), it will be assumed that each \fIMakefile.am\fP
+and \fIMakefile.in\fP belongs beneath the source directory and that each
+\fIMakefile\fP belongs beneath the build directory.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH ENVIRONMENT VARIABLES
+One of the following variables (but not both) should be set if the
+source
+directory is different from the build directory.
+If the build directory is simply a subdirectory of the source directory,
+the simpler variable OBJ_SUBDIR should be used.
+.TP
+OBJ_SUBDIR
+Indicates that the build directory is in the given subdirectory of the
+source directory.  For instance, if the source directory is \fItdesdk\fP
+and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
+should be set to \fIobj-i386-linux\fP.
+.TP
+OBJ_REPLACEMENT
+A \fBsed\fP expression that is used to transform the source directory
+into the build directory.
+For instance, if the source directory is \fI~/src/tdesdk\fP and the
+build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
+be set to \fIs#tdesdk#tdesdk-obj#\fP.
+.SH SEE ALSO
+.BR create_makefile (1).
+.SH AUTHOR
+create_makefiles was written by David Faure <faure@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cvs-clean.1 b/doc/man/scripts/cvs-clean.1
new file mode 100644
index 00000000..0706e485
--- /dev/null
+++ b/doc/man/scripts/cvs-clean.1
@@ -0,0 +1,50 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVS-CLEAN 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvs\-clean \- delete all files and directories not registered with CVS
+.SH SYNOPSIS
+.B cvs\-clean
+[ \fB-n, \-\-dry-run\fP ]
+[ \fB-h, \-\-help\fP ]
+.SH DESCRIPTION
+\fBcvs\-clean\fP recursively deletes everything in or beneath the
+current directory that is not known to CVS (i.e., that has not been
+checked out of or checked into a CVS repository).
+.PP
+A list of all files and directories that are deleted will be written to
+the console.
+.PP
+This script behaves similarly to the \fIcvs-clean\fP target from the
+file \fIadmin/Makefile.common\fP found in most TDE application sources.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB-n, \-\-dry-run\fP
+Print the intended actions to the console, but do not change anything on
+the filesystem.
+.TP
+\fB-h, \-\-help\fP
+Display usage information.
+.SH SEE ALSO
+.BR cvs (1).
+.SH AUTHOR
+This utility was written by Oswald Buddenhagen <ossi@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cvs2dist.1 b/doc/man/scripts/cvs2dist.1
new file mode 100644
index 00000000..f0bc71a3
--- /dev/null
+++ b/doc/man/scripts/cvs2dist.1
@@ -0,0 +1,201 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVS2DIST 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvs2dist \- convert subdirectories within TDE CVS into standalone
+source packages
+.SH SYNOPSIS
+.B cvsdist
+.I path-to-module
+.I directory-in-module
+[ \fB\-n, \-\-name\fP \fIname\fP ]
+[ \fB\-v, \-\-version\fP \fIversion\fP ]
+[ \fB\-\-admin-dir\fP \fIdir\fP ]
+[ \fB\-\-cvs-root\fP \fIroot\fP ]
+[ \fB\-B, \-\-branch\fP \fIbranch\fP ]
+[ \fB\-\-no-i18n\fP ]
+[ \fB\-\-no-i18n-lang\fP \fIlanguages\fP ]
+[ \fB\-\-log=\fP\fIlogfile\fP | \fB\-l\fP ]
+[ \fB\-m, \-\-make-unpackaged\fP ]
+[ \fB\-g, \-\-no-gzip\fP ]
+[ \fB\-b, \-\-no-bz2, \-\-no-bzip2\fP ]
+[ \fB\-o, \-\-only-directory\fP ]
+[ \fB\-r, \-\-required-header\fP \fIheader\fP ]
+[ \fB\-e, \-\-required-header-error-message\fP \fImessage\fP ]
+[ \fB\-d, \-\-remove-hidden\fP ]
+[ \fB\-\-replace-files\fP \fIpairs\fP ]
+[[--] \fIaddfile\fP ... ]
+.PP
+.B cvsdist
+\fB\-h, \-\-help\fP
+.SH DESCRIPTION
+Each module in the TDE CVS tree contains a large number of applications
+all bundled together.
+\fBcvs2dist\fP is used to extract a single application or component from
+one of these large CVS modules and bundle it into a standalone package.
+The application or component will be bundled into a standard
+distribution tarball (with a configure script and so on) that users can
+download, build and install.
+.PP
+By default, cvs2dist automatically tries to check out all translations
+of strings and documentation from the corresponding parts of the
+\fItde-i18n\fP CVS module and include them in the final packages.
+This can be suppressed or modified using the options \-\-no-i18n or
+\-\-no-i18n-lang.
+.PP
+The initial argument \fIpath-to-module\fP should specify where the CVS
+module has been checked out on your system, and the second argument
+\fIdirectory-in-module\fP should specify which directory within this
+module is to be packaged (all subdirectories beneath it will be included
+and so on).  See the EXAMPLE section below for details.
+.PP
+Both gzip and bzip2 compressed tarballs will be created by default and
+will be called \fIname[-version].tar.gz\fP and \fIname[-version].tar.bz2\fP.
+The \fIname\fP component will be the last directory component of
+\fIdirectory-in-module\fP unless otherwise specified by \-\-name, and
+the \fIversion\fP component will not be included unless it is specified by
+\-\-version.
+.PP
+Additional files from outside the CVS tree can be included in the final
+packages by passing them after all other options (these are the
+\fIaddfile\fP arguments displayed above).  These additional files will
+be placed in the top level directory of the final packages.
+The \-\- that precedes them is optional.
+.PP
+Many options are available for customising these procedures, as seen below.
+Note that cvs2dist will remove any temporary files that it creates.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-n, \-\-name\fP \fIname\fP
+The name of the package (to be used in the names of the final tarballs
+and directories).  Specifically, the compressed tarballs will be called
+\fIname-version.tar.gz\fP and \fIname-version.tar.bz2\fP (see the
+\-\-version option below for further information).
+This package name defaults to the last directory component of
+\fIdirectory-in-module\fP.
+.TP
+\fB\-v, \-\-version\fP \fIversion\fP
+The version of the package (to be used in the names of the final
+tarballs and directories).  If this is not supplied, no version is used
+at all (i.e., the compressed tarballs will just be called \fIname.tar.gz\fP
+and \fIname.tar.bz2\fP).
+.TP
+\fB\-\-admin-dir\fP \fIdir\fP
+The location of \fIadmin/\fP on the filesystem.  Symbolic links may
+be used.  Defaults to \fIpath-to-module/admin\fP.
+.TP
+\fB\-\-cvs-root\fP \fIroot\fP
+The value to use as CVSROOT when checking out translations from CVS.
+Defaults to the CVSROOT environment variable.
+If \-\-no-i18n is passed then this option has no effect.
+.TP
+\fB\-B, \-\-branch\fP \fIbranch\fP
+Use the given CVS branch for checking out translations from CVS.
+If \-\-no-i18n is passed then this option has no effect.
+.TP
+\fB\-\-no-i18n\fP
+Do not check out any translations from CVS.
+.TP
+\fB\-\-no-i18n-lang\fP \fIlanguages\fP
+Exclude the given language(s) when checking out translations from CVS.
+The list of languages should be comma-separated,
+such as \fI\-\-no-i18n-lang uk,de,en_GB\fP .
+.TP
+\fB\-\-log=\fP\fIlogfile\fP
+Log all proceedings to the given logfile.  Note that the = is essential,
+and may not be omitted.
+.TP
+\fB\-l\fP
+Log all proceedings to the default logfile in the current directory.
+.TP
+\fB\-m, \-\-make-unpackaged\fP
+In addition to the compressed tarballs, an unpacked distribution will be
+created in the current directory.
+.TP
+\fB\-g, \-\-no-gzip\fP
+Do not create a gzip package (\fIname-version.tar.gz\fP).
+.TP
+\fB\-b, \-\-no-bz2, \-\-no-bzip2\fP
+Do not create a bzip2 package (\fIname-version.tar.bz2\fP).
+.TP
+\fB\-o, \-\-only-directory\fP
+Alias for \-mgb.  No packages will be created, only an unpacked directory.
+.TP
+\fB\-r, \-\-required-header\fP \fIheader\fP
+When the user runs configure, an error will be generated if
+\fIheader\fP is not found on the user's system.
+.TP
+\fB\-e, \-\-required-header-error-message\fP \fImessage\fP
+The error to display to a user when the header passed with
+\-\-required-header is not found on the user's system.  Defaults to a
+sensible message.
+.TP
+\fB\-d, \-\-remove-hidden\fP
+Remove hidden files and directories (e.g., dotfiles) from the packages.
+.TP
+\fB\-h, \-\-help\fP
+Display instructions on how to use cvs2dist.
+.TP
+\fB\-\-replace-files\fP \fIpairs\fP
+Move one or more files around in the final distribution packages.
+The \fIpairs\fP argument should be a comma-separated list of
+replacements to make.  Each replacement specifies a single file to move, and
+should be of the form \fIsource\fP@\fIdest\fP.
+.br
+For each replacement, the source file will be moved to the
+destination file (in particular, the source file will be deleted).
+All filenames are relative to the top-level directory
+of the package.  Spaces in filenames are not allowed.
+.br
+Please be careful when using this option!  Try to avoid the use of ..
+in the filenames, since it may cause unexpected problems.
+.br
+An example of this option might be
+\fI\-\-replace-files take_this_file@move_it_here,configure.in.bot.dist@configure.in.bot\fP .
+.SH EXAMPLE
+The following example creates packages of the kolf picture plugin from
+the CVS source tree currently checked out in \fI/sources\fP.
+.PP
+.RS
+\fIexample$\fP cvs2dist /sources/tdegames kolf/objects/picture
+\-n kolf-picture \-v 0.9 \-r "kolf/game.h" \-\-log ~/tmp/extra-file
+.RE
+.PP
+The packages will be named \fIkolf-picture-0.9\fP and
+the process will be logged.  For configure to succeed when a user builds
+these packages, the header \fIkolf/game.h\fP must be installed or an
+error will occur.  The additional file \fI~/tmp/extra-file\fP will be
+included in the packages even though it is not part of the CVS source tree.
+.SH FILES
+.TP
+\fI~/.cvs2distrc\fP
+Any options found in this file will be
+added to the beginning of the command-line arguments.
+.SH SEE ALSO
+.BR cvs (1).
+.PP
+For the latest updates to this script, see the cvs2dist website
+\fIhttp://www.katzbrown.com/shiritsu/programming/cvs2dist/\fP.
+.SH AUTHOR
+cvs2dist was written by Jason Katz-Brown <jason@katzbrown.com>,
+Sebastian Stein <seb.stein@hpfsc.de>, Dominique Devriese <devriese@kde.org>
+and Michael Buesch <mbuesch@freenet.de>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cvsbackport.1 b/doc/man/scripts/cvsbackport.1
new file mode 100644
index 00000000..7181ac67
--- /dev/null
+++ b/doc/man/scripts/cvsbackport.1
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSBACKPORT 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsbackport \- backport the last change in HEAD to a branch
+.SH SYNOPSIS
+.B cvsbackport
+\fIfile\fP ...
+.SH DESCRIPTION
+For each file given on the command line,
+\fBcvsbackport\fP will attempt to determine the last change made to
+the file in HEAD and then backport that change to a CVS branch (the
+branch name is hard-coded; see below).
+.PP
+The changes to be backported will be displayed on screen, and you will
+have the chance to confirm or abort before any commits are made.
+.PP
+The files must be checked out from HEAD when you run this utility.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH WARNINGS
+The branch tag is hard-coded into the script (currently it is set to
+KDE_3_4_BRANCH).
+.PP
+If you abort (i.e., you do not make the suggested commits), your files
+will be checked out from the branch (and not from HEAD as they were
+before).
+.SH SEE ALSO
+.BR cvsblame (1),
+.BR cvsforwardport (1),
+.BR cvslastchange (1),
+.BR cvslastlog (1),
+.BR cvsrevertlast (1).
+.SH AUTHOR
+This utility was written by Dirk Mueller and David Faure.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cvscheck.1 b/doc/man/scripts/cvscheck.1
new file mode 100644
index 00000000..3d79c255
--- /dev/null
+++ b/doc/man/scripts/cvscheck.1
@@ -0,0 +1,107 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSCHECK 1 "March 26, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvscheck \- offline status report for files in a checked-out CVS module
+.SH SYNOPSIS
+.B cvscheck
+[ \fB\-u, \-\-unknown\fP ]
+[ \fB\-m, \-\-modified\fP ]
+[ \fB\-\-missing\fP ]
+[ \fB\-t, \-\-tagged\fP ]
+[ \fB\-a, \-\-added\fP ]
+[ \fB\-r, \-\-removed\fP ]
+[ \fB\-c, \-\-conflicts\fP ]
+[ \fB\-l, \-\-local\fP ]
+[ \fIdir\fP ... ]
+.SH DESCRIPTION
+\fBcvscheck\fP prints information about the status of your local CVS
+checkout without communicating with the server.  This means it is
+extremely fast and does not require a network connection.
+.PP
+The given directories and all of their subdirectories will be processed
+recursively (though see the \-\-local option below).
+If no directory is given, the current directory and its
+recursed subdirectories will be used.
+.PP
+Each file with an interesting status will be printed with a status
+character in front of its name.  The status characters are as follows.
+.TP
+? \fIfoobar.c\fP
+The file is not known to CVS.  Maybe you should add it?
+.TP
+M \fIfoobar.c\fP
+The file is for sure locally modified.
+.TP
+m \fIfoobar.c\fP
+The file \fImight\fP have local changes.  You should diff with the
+server to make sure.
+.TP
+C \fIfoobar.c\fP
+The file has a CVS conflict and therefore cannot be committed.
+.TP
+U \fIfoobar.c\fP
+The file is in CVS but is somehow missing in your local checkout.
+.TP
+T \fIfoobar.c\fP
+The file has an unusual sticky CVS tag.
+.TP
+A \fIfoobar.c\fP
+You have "cvs add"ed this file but you have not yet committed.
+.TP
+R \fIfoobar.c\fP
+You have "cvs remove"d this file but you have not yet committed.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+By default cvscheck will display the status for all files in and
+beneath the requested directories.  The following options however can be
+used to display only files with a particular status and/or in a
+particular directory.
+.TP
+\fB\-u, \-\-unknown\fP
+Show only unknown (?) files.
+.TP
+\fB\-m, \-\-modified\fP
+Show only modified (m/M) files.
+.TP
+\fB\-\-missing\fP
+Show only missing (U) files.
+.TP
+\fB\-t, \-\-tagged\fP
+Show only tagged (T) files.
+.TP
+\fB\-a, \-\-added\fP
+Show only added (A) files.
+.TP
+\fB\-r, \-\-removed\fP
+Show only removed (R) files.
+.TP
+\fB\-c, \-\-conflicts\fP
+Show only conflict (C) files.
+.TP
+\fB\-l, \-\-local\fP
+Do not recurse.  That is, process the given directory but none of its
+subdirectories.
+.SH SEE ALSO
+.BR cvs (1).
+.SH AUTHOR
+cvscheck was written by Dirk Mueller <mueller@kde.org> and
+Sirtaj Singh Kang <taj@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cvsforwardport.1 b/doc/man/scripts/cvsforwardport.1
new file mode 100644
index 00000000..0ca6d29f
--- /dev/null
+++ b/doc/man/scripts/cvsforwardport.1
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSFORWARDPORT 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsforwardport \- forwardport the last change in a branch to HEAD
+.SH SYNOPSIS
+.B cvsforwardport
+\fIfile\fP ...
+.SH DESCRIPTION
+For each file given on the command line,
+\fBcvsforwardport\fP will attempt to determine the last change made to
+the file in the primary CVS branch and then forwardport that change to HEAD.
+The branch name is hard-coded; see below.
+.PP
+The changes to be forwardported will be displayed on screen, and you will
+have the chance to confirm or abort before any commits are made.
+.PP
+The files must be checked out from the branch when you run this utility.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH WARNINGS
+The branch tag is hard-coded into the script (currently it is set to
+KDE_3_4_BRANCH).
+.PP
+If you abort (i.e., you do not make the suggested commits), your files
+will be checked out from HEAD (and not from the branch as they were
+before).
+.SH SEE ALSO
+.BR cvsbackport (1),
+.BR cvsblame (1),
+.BR cvslastchange (1),
+.BR cvslastlog (1),
+.BR cvsrevertlast (1).
+.SH AUTHOR
+This utility was written by Dirk Mueller and David Faure.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cvslastchange.1 b/doc/man/scripts/cvslastchange.1
new file mode 100644
index 00000000..b651e441
--- /dev/null
+++ b/doc/man/scripts/cvslastchange.1
@@ -0,0 +1,59 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSLASTCHANGE 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvslastchange \- display the last committed changes for a file
+.SH SYNOPSIS
+.B cvslastchange
+\fIfile\fP [ \fIrevision\fP ]
+.br
+.B cvslastchange
+\fBM\fP +\fIdigits\fP -\fIdigits\fP
+.I file revision
+.SH DESCRIPTION
+\fBcvslastchange\fP displays the last changes committed to the CVS
+for the given file.
+It does this by launching '\fIcvs log\fP' and '\fIcvs diff\fP'.
+.PP
+If a revision is passed, the changes committed for that particular revision
+will be displayed.  Otherwise the currently checked out revision will be used.
+.PP
+This tool works with other branches as well as with HEAD.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fBM\fP +\fIdigits\fP -\fIdigits\fP
+These options are currently ignored.
+.SH ENVIRONMENT VARIABLES
+.TP
+CVSLASTCHANGE_KEEP_WHITESPACE
+Define this variable if you do not want the whitespace to be modified
+in any way when displaying changes.  Usually the whitespace is tidied
+up a little before the changes are displayed on screen.
+.br
+This variable is useful if you are using cvslastchange to extract a
+patch that can be applied elsewhere.
+.SH SEE ALSO
+.BR cvsbackport (1),
+.BR cvsblame (1),
+.BR cvsforwardport (1),
+.BR cvslastlog (1),
+.BR cvsrevertlast (1).
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cvslastlog.1 b/doc/man/scripts/cvslastlog.1
new file mode 100644
index 00000000..445a1a74
--- /dev/null
+++ b/doc/man/scripts/cvslastlog.1
@@ -0,0 +1,39 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSLASTLOG 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvslastlog \- prints the log of the last commit for a file
+.SH SYNOPSIS
+.B cvslastlog
+.I file
+.SH DESCRIPTION
+\fBcvslastlog\fP shows the log associated with the last CVS commit for the
+given file.
+It depends on the version of the local file, not the one on the server.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR cvsbackport (1),
+.BR cvsblame (1),
+.BR cvsforwardport (1),
+.BR cvslastchange (1),
+.BR cvsrevertlast (1).
+.SH AUTHOR
+cvslastlog was written by David Faure <faure@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cvsrevertlast.1 b/doc/man/scripts/cvsrevertlast.1
new file mode 100644
index 00000000..aedf45aa
--- /dev/null
+++ b/doc/man/scripts/cvsrevertlast.1
@@ -0,0 +1,38 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CVSREVERTLAST 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cvsrevertlast \- revert files in CVS by one version
+.SH SYNOPSIS
+.B cvsrevertlast
+\fIfile\fP ...
+.SH DESCRIPTION
+\fBcvsrevertlast\fP is used to revert all the files on the command line
+by one version in CVS.  The files will not be committed.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR cvsbackport (1),
+.BR cvsblame (1),
+.BR cvsforwardport (1),
+.BR cvslastchange (1),
+.BR cvslastlog (1).
+.SH AUTHOR
+This utility was written by Charles Samuels <charles@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/cxxmetric.1 b/doc/man/scripts/cxxmetric.1
new file mode 100644
index 00000000..a8a855cd
--- /dev/null
+++ b/doc/man/scripts/cxxmetric.1
@@ -0,0 +1,34 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH CXXMETRIC 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+cxxmetric \- simple source metrics for C and C++
+.SH SYNOPSIS
+.B cxxmetric
+.RI "[ " file " ... ]"
+.SH DESCRIPTION
+\fBcxxmetric\fP counts lines of code, comment and blank space and
+calculates various other statistics for each given source file.
+Source files must be in C or C++.
+.PP
+If no source files are specified then all C/C++ files in or beneath the
+current directory will be used.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/extend_dmalloc.1 b/doc/man/scripts/extend_dmalloc.1
new file mode 100644
index 00000000..0078442e
--- /dev/null
+++ b/doc/man/scripts/extend_dmalloc.1
@@ -0,0 +1,43 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH EXTEND_DMALLOC 1 "April 29, 2001"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+extend_dmalloc \- analyse return-addresses from dmalloc logfiles
+.SH SYNOPSIS
+.B extend_dmalloc
+.I dmalloc-log binary
+.SH DESCRIPTION
+\fBextend_dmalloc\fP will run
+.BR gdb (1)
+to get information on the return-addresses from a
+.BR dmalloc (1)
+logfile.  Specifically it will examine any \fIra=\fP lines and try to
+get the corresponding line numbers.
+.PP
+The argument \fIbinary\fP must be the binary that generated the log
+\fIdmalloc-log\fP.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH NOTES
+You may wish to direct the output from extend_dmalloc to a file, since
+otherwise gdb seems to prompt for a return as if you are at the end of a
+page.
+.SH AUTHOR
+extend_dmalloc was written by Gray Watson <gray.watson@letters.com>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/extractattr.1 b/doc/man/scripts/extractattr.1
new file mode 100644
index 00000000..7e506e44
--- /dev/null
+++ b/doc/man/scripts/extractattr.1
@@ -0,0 +1,61 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH EXTRACTATTR 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+extractattr \- extract element attributes from UI and XML GUI files
+.SH SYNOPSIS
+.B extractattr
+\fB\-\-attr=\fP\fIname\fP
+[ \fB\-\-attr=\fP\fIname\fP ... ]
+[ \fB\-\-context=\fP\fIname\fP ]
+\fIfile\fP ...
+.PP
+.B extractattr \-\-help
+.SH DESCRIPTION
+\fBextractattr\fP finds all of the given element attributes within the
+given files.  It then writes the corresponding \fIi18n()\fP calls to
+standard output (usually redirected to rc.cpp) so that xgettext can parse
+them.  Only the attributes specified by \fB\-\-attr\fP will be extracted.
+.PP
+Both Qt designer (.ui) files and XML GUI (.rc) files are understood.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-\-attr=\fP\fIname\fP
+Specifies an attribute to be extracted.  This option may be used
+multiple times.
+.br
+The \fIname\fP argument must be of the form
+\fIElement\fP,\fIattribute\fP or
+\fIElement\fP,\fIattribute\fP,\fIcontext\fP.
+.br
+The context is optional, and is used in constructing the i18n() calls.
+If specified it will override the default context set by \fB\-\-context\fP.
+.TP
+\fB\-\-context=\fP\fIname\fP
+Give all i18n() calls the given context: i18n("\fIname\fP", ...).
+.TP
+\fB\-\-help\fP
+Display a summary of options.
+.SH EXAMPLE
+extractattr \-\-attr=Title,data \-\-attr=Description,data,Stencils file.ui
+.SH AUTHOR
+This utility was written by Richard Evans <rich@ridas.com> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/extractrc.1 b/doc/man/scripts/extractrc.1
new file mode 100644
index 00000000..130fdb08
--- /dev/null
+++ b/doc/man/scripts/extractrc.1
@@ -0,0 +1,60 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH EXTRACTRC 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+extractrc \- extract message strings from UI and XML GUI files
+.SH SYNOPSIS
+.B extractrc
+[ \fB\-\-tag\-group=\fP\fIgroup\fP ]
+[ \fB\-\-tag=\fP\fIname\fP ... ]
+[ \fB\-\-context=\fP\fIname\fP ]
+\fIfile\fP ...
+.PP
+.B extractrc \-\-help
+.SH DESCRIPTION
+\fBextractrc\fP finds all text tags and other message strings within the
+given files.  It then writes the corresponding \fIi18n()\fP calls to
+standard output (usually redirected to rc.cpp) so that xgettext can parse
+them.
+.PP
+It understands both Qt designer (.ui) files and XML GUI (.rc) files.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+Note that the old \fB\-\-lines\fP option is deprecated; source line
+numbers are now always included in comments.
+.TP
+\fB\-\-tag\-group=\fP\fIgroup\fP
+Use a predefined group of tags that we are interested in.
+Valid groups are default, koffice and none.
+The default group will be used if this option is omitted.
+.TP
+\fB\-\-tag=\fP\fIname\fP
+Extract also the contents of the tag \fIname\fP.
+This option may be used multiple times
+(e.g., \-\-tag=tag_one \-\-tag=tag_two).
+.TP
+\fB\-\-context=\fP\fIname\fP
+Give all i18n() calls the given context: i18n("\fIname\fP", ...).
+.TP
+\fB\-\-help\fP
+Display a summary of options.
+.SH AUTHOR
+This utility was written by Richard Evans <rich@ridas.com> and others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/findmissingcrystal.1 b/doc/man/scripts/findmissingcrystal.1
new file mode 100644
index 00000000..32b23294
--- /dev/null
+++ b/doc/man/scripts/findmissingcrystal.1
@@ -0,0 +1,42 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH FINDMISSINGCRYSTAL 1 "February 6, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+findmissingcrystal \- determine which TDE Crystal icons are the same as
+the TDE Classic hicolor icons
+.SH SYNOPSIS
+.B findmissingcrystal
+.I module
+.SH DESCRIPTION
+\fBfindmissingcrystal\fP is a small utility that runs through the icons
+in the given TDE module and determines which Crystal icons from that
+module are identical to the old TDE Classic hicolor icons.
+.PP
+This script \fBmust\fP be run from the top-level directory of a TDE source
+tree (i.e., the directory containing \fItdelibs\fP, \fItdebase\fP, etc.).
+It is assumed that \fImodule\fP is a top-level module in the source tree,
+and it is also assumed that the source tree contains the \fItdeartwork\fP
+module (which contains the old hicolor icons).
+.PP
+For each Crystal icon in the given module, a message will be output
+describing whether the icon is new (no matching hicolor icon was found),
+different from the hicolor icon or the same as the hicolor icon.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/fixkdeincludes.1 b/doc/man/scripts/fixkdeincludes.1
new file mode 100644
index 00000000..6c5bea18
--- /dev/null
+++ b/doc/man/scripts/fixkdeincludes.1
@@ -0,0 +1,73 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH FIXTDEINCLUDES 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+fixkdeincludes \- reduce the number of #includes in TDE source files
+.SH SYNOPSIS
+.B fixkdeincludes
+[ \fB\-v, \-\-verbose\fP ]
+[ \fB\-e, \-\-experimental\fP ]
+[ \fB\-m, \-\-modify\fP ]
+[ \fIfile\fP ... ]
+.br
+.B fixkdeincludes \-\-help
+.SH DESCRIPTION
+\fBfixkdeincludes\fP tries to reduce the number of #includes in C++ source
+files.  Much of its processing is specific to TDE sources and so it
+might not work so well with sources for non-TDE applications.
+.PP
+The following problems are identified by fixkdeincludes:
+.PP
+.RS
+Including headers that are no longer supported but which exist for
+compatibility with older Qt/KDE versions;
+.PP
+Including the same file multiple times;
+.PP
+Using #include <...> instead of #include "...".
+.RE
+.PP
+There is also an experimental mode which tries removing each #include
+one at a time (with a few exceptions) to see whether the source still
+compiles.  Note that this experimental mode will modify the original sources.
+.PP
+By default the sources will not be modified; the identified problems
+will simply be written to standard output.
+.PP
+The list of C++ sources to examine should be given on the command-line.
+If no files are given, all C++ sources in or beneath the current
+directory will be examined (with the exception of directories whose
+\fIMakefile.am\fP contains \-UTQT_NO_COMPAT or \-UTDE_NO_COMPAT).
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-v, \-\-verbose\fP
+Verbose mode.  Additional debugging information is written to standard output.
+.TP
+\fB\-e, \-\-experimental\fP
+Experimental mode, as described above in detail.  Note that this option
+implies \fB\-\-modify\fP.
+.TP
+\fB\-m, \-\-modify\fP
+As well as writing messages to standard output, actually modify the
+original sources to fix any problems that were found.
+.SH AUTHOR
+fixkdeincludes was written by Dirk Mueller <mueller@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/fixuifiles.1 b/doc/man/scripts/fixuifiles.1
new file mode 100644
index 00000000..17ce46a6
--- /dev/null
+++ b/doc/man/scripts/fixuifiles.1
@@ -0,0 +1,63 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH FIXUIFILES 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+fixuifiles \- remove undesirable features from TQt/TDE .ui files
+.SH SYNOPSIS
+.B fixuifiles
+[ \fB\-v, \-\-verbose\fP ]
+[ \fB\-\-omitqtcheck\fP ]
+[ \fIfile\fP ... ]
+.br
+.B fixuifiles \-\-help
+.SH DESCRIPTION
+\fBfixuifiles\fP processes one or more TQt/TDE user interface definition
+files (.ui files) and tries to remove some of the insanities found
+therein.  If no filenames are given, fixuifiles will process all .ui
+files in or beneath the current directory.
+.PP
+The following problems are fixed:
+.PP
+.RS
+Too high minimum Qt version;
+.PP
+Hardcoded untranslatable Alt+Letter accels (auto-added by Qt Designer);
+.PP
+Captions that are equal to class names (auto-added by Qt Designer).
+.RE
+.PP
+The threshold Qt version can be set
+using either a \fI.qt_minversion\fP file (containing simply the Qt version
+number) or a \fIconfigure.in.in\fP file (containing an appropriate
+MIN_CONFIG macro).  These files may be in the directory containing the .ui
+file or any parent directory.  If no threshold Qt version is found,
+a sensible default will be used.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-v, \-\-verbose\fP
+Verbose mode.  Additional debugging information is written to standard output.
+.TP
+\fB\-\-omitqtcheck\fP
+Do not check the minimum Qt version.
+.SH AUTHOR
+fixuifiles was written by David Faure <faure@kde.org> and
+Dirk Mueller <mueller@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/kdedoc.1 b/doc/man/scripts/kdedoc.1
new file mode 100644
index 00000000..1911442c
--- /dev/null
+++ b/doc/man/scripts/kdedoc.1
@@ -0,0 +1,42 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH TDEDOC 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kdedoc \- view documentation for a TDE class
+.SH SYNOPSIS
+.B kdedoc
+.I classname
+.SH DESCRIPTION
+\fBkdedoc\fP opens the documentation for the TDE class \fIclassname\fP
+in kfm/konqueror.  Note that the class name is case sensitive.  It is
+assumed that you have the tdelibs documentation installed.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH EXAMPLES
+To bring up help on the class TDEAboutDialog:
+.PP
+.RS
+kdedoc TDEAboutDialog
+.RE
+.SH DEBIAN USERS
+The tdelibs documentation is in the Debian package \fItdelibs4-doc\fP,
+which will need to be installed.
+.SH SEE ALSO
+.BR qtdoc (1).
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/kdelnk2desktop.py.1 b/doc/man/scripts/kdelnk2desktop.py.1
new file mode 100644
index 00000000..41cce73a
--- /dev/null
+++ b/doc/man/scripts/kdelnk2desktop.py.1
@@ -0,0 +1,39 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KDELNK2DESKTOP.PY 1 "November 14, 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kdelnk2desktop.py \- converts .kdelnk to .desktop
+.SH SYNOPSIS
+.B kdelnk2desktop.py
+.RI "[ " kdelnk-file " ] ..."
+.SH DESCRIPTION
+\fBkdelnk2desktop.py\fP is used to convert
+a \fI.kdelnk\fP file (used by KDE 1) into a \fI.desktop\fP
+file (used by KDE 2 and later).
+.PP
+File \fIkdelnk-file\fP must have a name ending in \fI.kdelnk\fP.
+After kdelnk2desktop.py is run, this will be replaced by a new file
+ending in \fI.desktop\fP.  The original \fIkdelnk-file\fP will be
+removed.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH WARNING
+If \fIkdelnk-file\fP does not end in \fI.kdelnk\fP,
+the results of this script are unpredictable.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/kdemangen.pl.1 b/doc/man/scripts/kdemangen.pl.1
new file mode 100644
index 00000000..8acd79df
--- /dev/null
+++ b/doc/man/scripts/kdemangen.pl.1
@@ -0,0 +1,51 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KDEMANGEN.PL 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+kdemangen.pl \- automatically create a draft manpage for a TDE app
+.SH SYNOPSIS
+.B kdemangen.pl
+.I /path/to/application
+.SH DESCRIPTION
+\fBkdemangen.pl\fP will automatically create a draft manpage for a TDE
+application.  Manpages are always better when hand-tailored, but this
+should give you a fairly good start.
+.PP
+To create the manpage, it will use the \-\-author and \-\-help\-all
+output for the application passed on the command line.
+It will also use the description in the
+Debian control file if one is available.  To make use of this additional
+feature, you must run kdemangen.pl from within the \fIdebian/\fP
+subdirectory of the application sources.
+.PP
+The new manpage will be written to standard output.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH WARNING
+This utility will only work for a full TDE application that uses
+TDECmdLineArgs (which most full TDE applications do).
+.SH EXAMPLE
+.RS
+cd /path/to/tde/srcs/tdeedu/debian
+.br
+kdemangen /usr/bin/kstars > kstars.1
+.RE
+.SH AUTHOR
+kdemangen.pl was written by Dominique Devriese <devriese@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/licensecheck.1 b/doc/man/scripts/licensecheck.1
new file mode 100644
index 00000000..48728f2c
--- /dev/null
+++ b/doc/man/scripts/licensecheck.1
@@ -0,0 +1,37 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH LICENSECHECK 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+licensecheck \- simple license checker for source files
+.SH SYNOPSIS
+.B licensecheck
+.RB "[ " \-v " ]"
+\fIfile\fP ...
+.SH DESCRIPTION
+\fBlicensecheck\fP examines the comments at the beginning of each given
+source file and tries to determine which license the file is placed
+under.  It does this by searching for blocks of text that it recognises
+as belonging to various licenses.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+.B \-v
+Verbose mode.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/makeobj.1 b/doc/man/scripts/makeobj.1
new file mode 100644
index 00000000..50a9f864
--- /dev/null
+++ b/doc/man/scripts/makeobj.1
@@ -0,0 +1,66 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH MAKEOBJ 1 "March 20, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+makeobj \- run make from the correct directory
+.SH SYNOPSIS
+.B makeobj
+[ \fImake-argument\fP ... ]
+.SH DESCRIPTION
+\fBmakeobj\fP is a wrapper around \fBmake\fP which basically checks
+whether it's in the source directory or the build directory and changes
+to the correct directory before calling make.
+.PP
+The command-line arguments will (generally) be passed directly to make.
+.PP
+This script is useful if the source directory is different from the
+build directory and the Makefiles are kept in the build directory, as is
+common for instance when building the TDE sources.  This script can however
+be used in more standard scenarios (such as non-TDE projects for which the
+source and build directories are the same), where it will behave just like
+make.
+.PP
+One of the environment variables OBJ_SUBDIR or OBJ_REPLACEMENT
+should be set to indicate where the build directory is in relation to
+the source directory.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH ENVIRONMENT VARIABLES
+Note that only one of OBJ_SUBDIR and OBJ_REPLACEMENT should be used.
+If the build directory is simply a subdirectory of the source directory,
+the simpler variable OBJ_SUBDIR should be used.
+.TP
+OBJ_SUBDIR
+Indicates that the build directory is in the given subdirectory of the
+source directory.  For instance, if the source directory is \fItdesdk\fP
+and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
+should be set to \fIobj-i386-linux\fP.
+.TP
+OBJ_REPLACEMENT
+A \fBsed\fP expression that is used to transform the source directory
+into the build directory.
+For instance, if the source directory is \fI~/src/tdesdk\fP and the
+build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
+be set to \fIs#src/tdesdk#src/tdesdk-obj#\fP.
+.SH SEE ALSO
+.BR make (1),
+.BR sed (1).
+.SH AUTHOR
+makeobj was written by Stephan Kulow <coolo@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/package_crystalsvg.1 b/doc/man/scripts/package_crystalsvg.1
new file mode 100644
index 00000000..32d8644e
--- /dev/null
+++ b/doc/man/scripts/package_crystalsvg.1
@@ -0,0 +1,41 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH PACKAGE_CRYSTALSVG 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+package_crystalsvg \- bundle up Crystal SVG sources from a TDE checkout
+.SH SYNOPSIS
+.B package_crystalsvg
+.SH DESCRIPTION
+\fBpackage_crystalsvg\fP assumes that the current directory contains one
+or more checked-out TDE modules.  It searches these modules for Crystal
+SVG vector sources (.svgz or .svg.gz files)
+and packages them up into a tarball.  The tarball will also
+contain \fIFILES\fP (describing the contents of the tarball and which
+TDE modules/paths they were copied from) as well as some other bits and
+pieces.
+.PP
+Note that you must at least have tdelibs checked out for this utility to
+run.
+.PP
+The final tarball will be created in the current working directory.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH AUTHOR
+package_crystalsvg was written by Frans Englich <frans.englich@telia.com>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/png2mng.pl.1 b/doc/man/scripts/png2mng.pl.1
new file mode 100644
index 00000000..c86c1727
--- /dev/null
+++ b/doc/man/scripts/png2mng.pl.1
@@ -0,0 +1,49 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH PNG2MNG.PL 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+png2mng.pl \- combine a set of PNG images into an animated MNG image
+.SH SYNOPSIS
+.B png2mng.pl
+.I basename width height
+.SH DESCRIPTION
+\fBpng2mng.pl\fP reads a sequence of PNG images and combines them into
+a single animated MNG image.
+.PP
+The individual PNG images should be numbered consecutively from zero up,
+and should have names of the form
+.I basenameXXXX
+where
+.I XXXX
+is the four-digit sequence number (0000, 0001, 0002, etc).
+The width and height of the PNG images should
+also be included on the command line.
+.PP
+The final animated MNG image will be written to standard output.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH EXAMPLE
+The following example will combine the files hi32-action-kde-0000.png,
+hi32-action-kde-0001.png, hi32-action-kde-0002.png, etc., and write
+the resulting animated image to hi32-action-kde.mng:
+.PP
+.RS
+png2mng.pl hi32-action-kde- 32 32 > hi32-action-kde.mng
+.RE
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/pruneemptydirs.1 b/doc/man/scripts/pruneemptydirs.1
new file mode 100644
index 00000000..108c7e4d
--- /dev/null
+++ b/doc/man/scripts/pruneemptydirs.1
@@ -0,0 +1,65 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH PRUNEEMPTYDIRS 1 "September 27, 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+pruneemptydirs \- detects stale source dirs in a CVS tree
+.SH SYNOPSIS
+.B pruneemptydirs
+[ \fB\-f\fP ]
+.SH DESCRIPTION
+\fBpruneemptydirs\fP is used to clean up a local CVS tree.
+It detects directories containing remnants of old stuff which has been
+removed from the CVS.  Such stale directories often break compilation.
+The current directory and all directories beneath it will be examined.
+.PP
+Note that this tool does not remove anything; it simply prints what to
+do as a series of remove commands.  You can copy and paste these commands,
+or use them with eval in a script.
+.PP
+This tool works better if the source directory is not the same as the
+build directory, since it will not print directories containing old
+executables.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-f\fP
+Actually perform the deletions instead of just printing them out.
+Use this option with care (no warranties, etc.)!
+.SH ENVIRONMENT VARIABLES
+One of the following variables (but not both) should be set if the source
+directory is different from the build directory.
+If the build directory is simply a subdirectory of the source directory,
+the simpler variable OBJ_SUBDIR should be used.
+.TP
+OBJ_SUBDIR
+Indicates that the build directory is in the given subdirectory of the
+source directory.  For instance, if the source directory is \fItdesdk\fP
+and the build directory is \fItdesdk/obj-i386-linux\fP, then OBJ_SUBDIR
+should be set to \fIobj-i386-linux\fP.
+.TP
+OBJ_REPLACEMENT
+A \fBsed\fP expression that is used to transform the source directory
+into the build directory.
+For instance, if the source directory is \fI~/src/tdesdk\fP and the
+build directory is \fI~/src/tdesdk-obj\fP, then OBJ_REPLACEMENT could
+be set to \fIs#tdesdk#tdesdk-obj#\fP.
+.SH AUTHOR
+pruneemptydirs was written by David Faure <faure@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/qtdoc.1 b/doc/man/scripts/qtdoc.1
new file mode 100644
index 00000000..3b7c09f6
--- /dev/null
+++ b/doc/man/scripts/qtdoc.1
@@ -0,0 +1,50 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH QTDOC 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+qtdoc \- view documentation for a Qt class
+.SH SYNOPSIS
+.B qtdoc
+.RI "[ " classname " ]"
+.SH DESCRIPTION
+\fBqtdoc\fP opens a Qt help page in kfm/konqueror.
+If \fIclassname\fP is given, it opens the help page for that class (note
+that the class name is case insensitive).  Otherwise the main Qt help
+page is opened.  It is assumed that you have the Qt documentation
+installed.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH ENVIRONMENT VARIABLES
+.TP
+QTDIR
+The directory beneath which the Qt documentation is installed.
+Thus the main Qt help page should be in \fI$QTDIR/doc/html/\fP.
+If $QTDIR is not set, \fI/usr/share/qt3\fP will be assumed.
+.SH EXAMPLES
+To bring up help on class QString:
+.PP
+.RS
+qtdoc QString
+.RE
+.SH DEBIAN USERS
+The Qt documentation is in the Debian package \fIqt3-doc\fP, which will
+need to be installed.
+.SH SEE ALSO
+.BR kdedoc (1).
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/tdekillall.1 b/doc/man/scripts/tdekillall.1
new file mode 100644
index 00000000..92bf4380
--- /dev/null
+++ b/doc/man/scripts/tdekillall.1
@@ -0,0 +1,36 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH TDEKILLALL 1 "April 29, 2001"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+tdekillall \- kills processes started with tdeinit
+.SH SYNOPSIS
+.B tdekillall
+[ \fB\-\fP\fIsignal\fP ] \fIprocess-name\fP
+.SH DESCRIPTION
+\fBtdekillall\fP kills all processes with a particular name
+that were started through tdeinit.  Specifically, it kills all processes
+\fBtdeinit:\fP \fIprocess-name\fP.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-\fP\fIsignal\fP
+Kill the processes with signal \fIsignal\fP.  This option defaults to
+SIGTERM.  Run \fIkill \-l\fP for a list of possible signals.
+.SH AUTHOR
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/scripts/zonetab2pot.py.1 b/doc/man/scripts/zonetab2pot.py.1
new file mode 100644
index 00000000..d6a4330a
--- /dev/null
+++ b/doc/man/scripts/zonetab2pot.py.1
@@ -0,0 +1,39 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH ZONETAB2POT.PY 1 "November 14, 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+zonetab2pot.py \- converts a timezone list to a PO-file template
+.SH SYNOPSIS
+.B zonetab2pot.py
+[ \fItimezone-list\fP ]
+.SH DESCRIPTION
+\fBzonetab2pot.py\fP reads the timezone list given on the command-line
+and converts it to a gettext message file (PO-file) template containing
+the names of the individual timezones.
+.PP
+The given timezone list should be in the same format as the system
+\fIzone.tab\fP.  If no timezone list is specified on the command-line,
+\fI/usr/share/zoneinfo/zone.tab\fP will be used.
+.PP
+The new PO-file template will be written to standard output.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH AUTHOR
+zonetab2pot.py was written by Lukas Tinkl <lukas@kde.org>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/tdecachegrind/CMakeLists.txt b/doc/man/tdecachegrind/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/tdecachegrind/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/tdecachegrind/dprof2calltree.1 b/doc/man/tdecachegrind/dprof2calltree.1
new file mode 100644
index 00000000..88bcd0b0
--- /dev/null
+++ b/doc/man/tdecachegrind/dprof2calltree.1
@@ -0,0 +1,60 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH DPROF2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+dprof2calltree \- convert perl's DProf profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B dprof2calltree
+\fB\-f\fP \fIinput\fP
+[ \fB\-o\fP \fIoutput\fP ]
+.SH DESCRIPTION
+\fBdprof2calltree\fP reads the \fItmon.out\fP profiling data output by
+Perl's Devel::DProf profiling package, and converts it into calltree format
+for use by KCachegrind.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-f\fP \fIinput\fP
+Specifies the DProf \fItmon.out\fP file to convert.
+.TP
+\fB\-o\fP \fIoutput\fP
+Write the calltree output to the given file for use by KCachegrind.
+If omitted, the output will be written to file of the form
+\fIcachgrind.out.<input>\fP.
+.SH EXAMPLE
+If you run a perl script as:
+.PP
+.RS
+perl -d:DProf yourscript.pl
+.RE
+.PP
+then this will write profiling data to \fItmon.out\fP.  You can then
+work with this data in KCachegrind as follows:
+.PP
+.RS
+dprof2calltree -f tmin.out -o cachegrind.out.foo
+.br
+tdecachegrind cachegrind.out.foo
+.RE
+.SH SEE ALSO
+.BR tdecachegrind (1).
+.SH AUTHOR
+This converter was written by George Schlossnagle <george@omniti.com>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/tdecachegrind/hotshot2calltree.1 b/doc/man/tdecachegrind/hotshot2calltree.1
new file mode 100644
index 00000000..8c4d4441
--- /dev/null
+++ b/doc/man/tdecachegrind/hotshot2calltree.1
@@ -0,0 +1,57 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH HOTSHOT2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+hotshot2calltree \- convert hotshot profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B hotshot2calltree
+[ \fB\-\-file\-limit\fP \fIlimit\fP ]
+\fB\-o\fP \fIoutput\fP \fIinput\fP [ \fIinput\fP ... ]
+.SH DESCRIPTION
+\fBhotshot2calltree\fP reads one or more pstat profiling data files
+as output by the hotshot python profiler, and converts them into
+calltree format for use by KCachegrind.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-o\fP \fIoutput\fP
+Write the calltree output into the given file for use by KCachegrind.
+This may be \fB\-\fP if you wish to write to standard output.
+.TP
+\fIinput\fP ...
+Read the hotshot profiling data from the given file(s).
+.TP
+\fB\-\-file\-limit\fP \fIlimit\fP
+Stop after the given number of input files.
+.SH EXAMPLE
+Suppose that you have used hotshot to profile a python app, with results
+dumped to the file \fIpythongrind.prof\fP.  You may then work with this
+data in KCachegrind as follows.
+.PP
+.RS
+hotshot2cachegrind \-o cachegrind.out.0 pythongrind.prof
+.br
+tdecachegrind cachegrind.out.0
+.RE
+.SH SEE ALSO
+.BR tdecachegrind (1).
+.SH AUTHOR
+This converter was written by Jorg Beyer <job@webde-ag.de>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/tdecachegrind/memprof2calltree.1 b/doc/man/tdecachegrind/memprof2calltree.1
new file mode 100644
index 00000000..d4f52ead
--- /dev/null
+++ b/doc/man/tdecachegrind/memprof2calltree.1
@@ -0,0 +1,36 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH MEMPROF2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+memprof2calltree \- convert memprof profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B memprof2calltree
+.SH DESCRIPTION
+\fBmemprof2calltree\fP reads the memory profiles of memprof and
+converts them into calltree format for use by KCachegrind.
+.PP
+The memprof data must be supplied on standard input, and the
+corresponding calltree data will be written to standard output.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR tdecachegrind (1).
+.SH AUTHOR
+This converter was written by Josef Weidendorfer <Josef.Weidendorfer@gmx.de>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/tdecachegrind/op2calltree.1 b/doc/man/tdecachegrind/op2calltree.1
new file mode 100644
index 00000000..0242e6cd
--- /dev/null
+++ b/doc/man/tdecachegrind/op2calltree.1
@@ -0,0 +1,43 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH OP2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+op2calltree \- convert OProfile profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B op2calltree
+.SH DESCRIPTION
+\fBop2calltree\fP reads the profiling data output by OProfile v0.8 and
+converts it into calltree format for use by KCachegrind.
+.PP
+The OProfile data must be supplied on standard input, and should be
+obtained by running:
+.PP
+.RS
+opreport \-gdf
+.RE
+.PP
+This converter will then write a separate calltree data file for each
+application, to a file of the form \fIoprof.out.<app>\fP.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH SEE ALSO
+.BR tdecachegrind (1).
+.SH AUTHOR
+This converter was written by Josef Weidendorfer <Josef.Weidendorfer@gmx.de>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/tdecachegrind/pprof2calltree.1 b/doc/man/tdecachegrind/pprof2calltree.1
new file mode 100644
index 00000000..b5cf9082
--- /dev/null
+++ b/doc/man/tdecachegrind/pprof2calltree.1
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH PPROF2CALLTREE 1 "October 15, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+pprof2calltree \- convert APD profiling data to KCachegrind calltree format
+.SH SYNOPSIS
+.B pprof2calltree
+\fB\-f\fP \fIinput\fP
+.SH DESCRIPTION
+\fBpprof2calltree\fP reads the pprof profiling data output by
+APD (http://pecl.php.net/apd/), and converts it into calltree format
+for use by KCachegrind.
+.PP
+This utility is part of the TDE Software Development Kit.
+.SH OPTIONS
+.TP
+\fB\-f\fP \fIinput\fP
+Specifies the APD pprof trace file to convert.  This generally has a
+name of the form \fIpprof.XXXXX.Y\fP.  The calltree output for
+KCachegrind will then be written to the file \fIcachegrind.out.XXXXX.Y\fP.
+.SH EXAMPLE
+Suppose you profile a script with APD and obtain the pprof trace file
+\fIpprof.12345.1\fP.  You can then work with this data in KCachegrind as
+follows.
+.PP
+.RS
+pprof2calltree -f pprof.12345.1
+.br
+tdecachegrind cachegrind.out.12345.1
+.RE
+.PP
+.SH SEE ALSO
+.BR tdecachegrind (1).
+.SH AUTHOR
+This converter was written by George Schlossnagle <george@omniti.com>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/tdecachegrind/tdecachegrind.1 b/doc/man/tdecachegrind/tdecachegrind.1
new file mode 100644
index 00000000..d5f3ea06
--- /dev/null
+++ b/doc/man/tdecachegrind/tdecachegrind.1
@@ -0,0 +1,67 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH TDECACHEGRIND 1 "March 25, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+tdecachegrind \- a visualisation tool for valgrind profiling output
+.SH SYNOPSIS
+.B tdecachegrind
+.RI "[ " generic-options " ]"
+[ \fB\-r\fP \fIexec\fP ] [ \fItrace-file\fP ]
+.SH DESCRIPTION
+\fBKCachegrind\fP is a visualisation tool for the profiling data generated
+by \fBcalltree\fP, a profiling skin for \fBvalgrind\fP.  Applications can be
+profiled using calltree without being recompiled, and shared libraries
+and plugin architectures are supported.
+.PP
+For visualising the output from other profiling tools, several converters
+are available.  On Debian systems these can be found in the
+\fItdecachegrind-converters\fP package.
+.PP
+This application is part of the TDE Software Development Kit.
+.SH OPTIONS
+Below are the tdecachegrind-specific options.
+For a full summary of options, run \fItdecachegrind \-\-help\fP.
+.TP
+\fB\-r\fP \fIexec\fP
+Run the program \fIexec\fP under cachegrind.
+.TP
+\fItrace-file\fP
+Visualise data from the given trace.
+.SH SEE ALSO
+.BR calltree (1),
+.BR dprof2calltree (1),
+.BR hotshot2calltree (1),
+.BR memprof2calltree (1),
+.BR op2calltree (1),
+.BR pprof2calltree (1),
+.BR valgrind (1).
+.PP
+Full user documentation is available through the TDE Help Centre.
+You can also enter the URL
+\fIhelp:/tdecachegrind/\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/tdecachegrind/\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdesdk-doc-html\fP and read this documentation in HTML format from
+\fI/usr/share/doc/tde/HTML/en/tdecachegrind/\fP.
+.SH AUTHOR
+KCachegrind was written by Josef Weidendorfer <Josef.Weidendorfer@gmx.de>.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/umbrello/CMakeLists.txt b/doc/man/umbrello/CMakeLists.txt
new file mode 100644
index 00000000..24ccd704
--- /dev/null
+++ b/doc/man/umbrello/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/umbrello/umbrello.1 b/doc/man/umbrello/umbrello.1
new file mode 100644
index 00000000..3c5d77d5
--- /dev/null
+++ b/doc/man/umbrello/umbrello.1
@@ -0,0 +1,53 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH UMBRELLO 1 "March 19, 2005"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+umbrello \- a UML modelling tool and code generator
+.SH SYNOPSIS
+.B umbrello
+.RI "[ " generic-options " ]"
+[ \fIfile\fP ]
+.SH DESCRIPTION
+\fBUmbrello UML Modeller\fP is a Unified Modelling Language editor for TDE.
+With UML you can create diagrams of software and other systems in an
+industry standard format.  Umbrello can also generate code from your
+UML diagrams in a number of programming languages.
+.PP
+The program supports class diagrams, sequence diagrams, collaboration
+diagrams, use case diagrams, state diagrams, activity diagrams, component
+diagrams and deployment diagrams.
+.PP
+This application is part of the TDE Software Development Kit.
+.SH OPTIONS
+For a full summary of options, run \fIumbrello \-\-help\fP.
+.SH SEE ALSO
+Full user documentation is available through the TDE Help Centre.
+You can also enter the URL
+\fIhelp:/umbrello/\fP
+directly into konqueror or you can run
+`\fIkhelpcenter help:/umbrello/\fP'
+from the command-line.
+.PP
+If the TDE Help Centre is not installed then you can install the package
+\fItdesdk-doc-html\fP and read this documentation in HTML format from
+\fI/usr/share/doc/tde/HTML/en/umbrello/\fP.
+.SH AUTHOR
+Umbrello was written by Paul Hensgen <phensgen@users.sourceforge.net> and
+many others.
+.br
+This manual page was prepared by Ben Burton <bab@debian.org>
+for the Debian GNU/Linux system (but may be used by others).