Automated update from Qt3

1 files changed, 37 insertions, 37 deletions

diff --git a/configure b/configure
index 6e31bfc3d..816e1a38c 100755
--- a/configure
+++ b/configure
@@ -1,7 +1,7 @@
 #!/bin/sh
 #
 #
-# Configures to build the Qt library
+# Configures to build the TQt library
 #
 # Copyright (C) 1999-2008 Trolltech ASA.  All rights reserved.
 #
@@ -91,7 +91,7 @@ QMAKE_VARS="$QMAKE_VARS \"kbd-drivers += tty\" \"mouse-drivers += pc\""
 # initalize variables
 #-------------------------------------------------------------------------------
 
-# QTDIR may be set and point to an old or system-wide Qt installation
+# QTDIR may be set and point to an old or system-wide TQt installation
 unset QTDIR
 
 # initalize internal variables
@@ -783,7 +783,7 @@ while [ "$#" -gt 0 ]; do
 	fi
 	;;
     imgfmt-*|style-*|sql-*|gfx-*|kbd-*|mouse-*)
-	# if Qt style options were used, $VAL can be "no", "qt", or "plugin"
+	# if TQt style options were used, $VAL can be "no", "qt", or "plugin"
 	# if autoconf style options were used, $VAL can be "yes" or "no"
 	[ "$VAL" = "yes" ] && VAL=qt
 	# now $VAL should be "no", "qt", or "plugin"... double-check
@@ -1480,7 +1480,7 @@ fi
 if [ $AUTOTHREAD = never ]; then
     if [ "$CFG_THREAD" = "yes" ]; then
 	echo
-	echo "ERROR: Qt is not configured to support threading on this platform"
+	echo "ERROR: TQt is not configured to support threading on this platform"
 	echo "       See the THREAD settings in $XQMAKESPEC/qmake.conf"
 	echo
 	exit 2
@@ -1880,16 +1880,16 @@ Installation options:
 			  (default PREFIX/include)
     -plugindir dir ..... Plugins will be installed to dir
                           (default PREFIX/plugins)
-    -datadir dir ....... Data used by Qt programs will be installed to dir
+    -datadir dir ....... Data used by TQt programs will be installed to dir
                           (default PREFIX)
-    -translationdir dir  Translations of Qt programs will be installed to dir
+    -translationdir dir  Translations of TQt programs will be installed to dir
                           (default PREFIX/translations)
-    -sysconfdir dir ...  Settings used by Qt programs will be looked for in dir
+    -sysconfdir dir ...  Settings used by TQt programs will be looked for in dir
                           (default PREFIX/etc/settings)
 
  You may use these options to turn on strict plugin loading.
 
-    -buildkey key ...... Build the Qt library and plugins using the specified
+    -buildkey key ...... Build the TQt library and plugins using the specified
 			 key.  When the library loads plugins, it will only
 			 load those that have a matching key.
 
@@ -1900,11 +1900,11 @@ Configure options:
  plus simply denotes the default value. Here is a short explanation of each
  option:
 
- *  -release ........... Compile and link Qt with debugging turned off.
-    -debug ............. Compile and link Qt with debugging turned on.
+ *  -release ........... Compile and link TQt with debugging turned off.
+    -debug ............. Compile and link TQt with debugging turned on.
 
- *  -shared ............ Create and use a shared Qt library (libqt.so).
-    -static ............ Create and use a static Qt library (libqt.a).
+ *  -shared ............ Create and use a shared TQt library (libqt.so).
+    -static ............ Create and use a static TQt library (libqt.a).
 
  *  -no-gif ............ Do not compile in GIF reading support.
     -qt-gif ............ Compile in GIF reading support.
@@ -1914,15 +1914,15 @@ Configure options:
     -system-zlib ....... Use zlib from the operating system.
 			 See http://www.gzip.org/zlib
 
-    -fast .............. Configure Qt quickly by generating Makefiles only for
+    -fast .............. Configure TQt quickly by generating Makefiles only for
 			 library and subdirectory targets.  All other Makefiles
 			 are created as wrappers, which will in turn run qmake.
- *  -no-fast ........... Configure Qt normally by generating Makefiles for all
+ *  -no-fast ........... Configure TQt normally by generating Makefiles for all
 			 project files.
 
     -no-exceptions ..... Disable exceptions on platforms that support it.
 
-    -version-script .... Use a version script when linking the Qt library.
+    -version-script .... Use a version script when linking the TQt library.
 			 Internal symbols will be marked as local. Requires
 			 a recent GNU binutils package.
 
@@ -1945,7 +1945,7 @@ Configure options:
     -disable-<module> ..... Disable <module> where module is one of:
                             [ $CFG_MODULES_AVAILABLE ]
 
-    -qt-sql-<driver> ...... Enable a SQL <driver> in the Qt Library, by default
+    -qt-sql-<driver> ...... Enable a SQL <driver> in the TQt Library, by default
                             none are turned on.
     -plugin-sql-<driver> .. Enable SQL <driver> as a plugin to be linked to
                             at run time.
@@ -1960,7 +1960,7 @@ Configure options:
                             By default none of the SQL drivers are built,
 			    even if they are auto-detected.
 
-    -qt-style-<style> ..... Enable a GUI <style> in the Qt Library, by default
+    -qt-style-<style> ..... Enable a GUI <style> in the TQt Library, by default
                             all available styles are on.
     -plugin-style-<style> . Enable GUI <style> as a plugin to be linked to
                             at run time.
@@ -2152,8 +2152,8 @@ Qt/X11 only:
  $XKN  -no-xkb ............ Do not compile XKB (X KeyBoard extension) support.
  $XKY  -xkb ............... Compile XKB support.
 
- *  -no-dlopen-opengl .. Qt links against OpenGL libraries directly.
-    -dlopen-opengl ..... Qt uses dlopen(3) to resolve OpenGL functions
+ *  -no-dlopen-opengl .. TQt links against OpenGL libraries directly.
+    -dlopen-opengl ..... TQt uses dlopen(3) to resolve OpenGL functions
 			 (instead of linking with OpenGL libraries directly).
 
  $IMN  -no-inputmethod .... Do not compile immodule (extensible input method)
@@ -2194,19 +2194,19 @@ Qt/Embedded only:
 			 depths, from:  4, 8, 16, 24, and 32.
 			 (8bpp is required by the VGA16 driver)
 
-    -qt-gfx-<driver> ... Enable a graphics <driver> in the Qt Library.
+    -qt-gfx-<driver> ... Enable a graphics <driver> in the TQt Library.
     -plugin-gfx-<driver> Enable graphics <driver> as a plugin to be
                          linked to at run time.
     -no-gfx-<driver> ... Disable graphics <driver> entirely.
 
                          Possible values for <driver>: [ $CFG_GFX_AVAILABLE ]
 
-    -qt-kbd-<driver> ... Enable a keyboard <driver> in the Qt Library.
+    -qt-kbd-<driver> ... Enable a keyboard <driver> in the TQt Library.
     -no-kbd-<driver> ... Disable keyboard <driver> entirely.
 
                          Possible values for <driver>: [ sl5000 tty usb yopy vr41xx ]
 
-    -qt-mouse-<driver> . Enable a mouse <driver> in the Qt Library.
+    -qt-mouse-<driver> . Enable a mouse <driver> in the TQt Library.
     -no-mouse-<driver> . Disable mouse <driver> entirely.
 
                          Possible values for <driver>: [ pc bus linuxtp yopy vr41xx ]
@@ -2384,11 +2384,11 @@ fi
 # find if the compiler supports enough of STL for our purposes
 if [ $PLATFORM = "hpux-acc" -a "$CFG_STL" != "no" ]; then
    echo
-   echo "As of aCC A.3.0.30 you may enable STL support in Qt by adding -AA"
+   echo "As of aCC A.3.0.30 you may enable STL support in TQt by adding -AA"
    echo "to the QMAKE_CXXFLAGS and QMAKE_LFLAGS variables in"
    echo "$XQMAKESPEC/qmake.conf"
    echo "and re-running configure. Make sure to use the -AA compiler switch"
-   echo "in all your software projects using Qt as it turns on the new C++"
+   echo "in all your software projects using TQt as it turns on the new C++"
    echo "Standard Library which is not binary compatible with the old one."
    echo
 fi
@@ -2782,7 +2782,7 @@ fi
 
 rm -f $outpath/include/ntqmodules.h.new
 cat >$outpath/include/ntqmodules.h.new << EOF
-/* These modules are present in this configuration of Qt */
+/* These modules are present in this configuration of TQt */
 EOF
 for MODULE in $MODULES; do
     if [ -d "$relpath/src/$MODULE" ]; then
@@ -2833,7 +2833,7 @@ esac
 
 # QMAKE_CONFIG can contain the following:
 #
-# Things that affect the Qt API/ABI:
+# Things that affect the TQt API/ABI:
 #
 #   Options:
 #     minimal-config small-config medium-config large-config full-config
@@ -2849,7 +2849,7 @@ esac
 #
 #     X11     : inputmethod-ext
 #
-# Things that do not affect the Qt API/ABI:
+# Things that do not affect the TQt API/ABI:
 #     system-jpeg no-jpeg jpeg
 #     system-mng no-mng mng
 #     system-png no-png png
@@ -2888,12 +2888,12 @@ for config_option in $QMAKE_CONFIG; do
 	;;
 
     styles|tools|kernel|widgets|dialogs|iconview|workspace|inputmethod|network|canvas|table|xml|opengl|sql|stl)
-	# these config options affect the Qt API/ABI. they should influence
+	# these config options affect the TQt API/ABI. they should influence
 	# the generation of the buildkey, so we don't skip them
    	SKIP="no"
 	;;
 
-    *) # skip all other options since they don't affect the Qt API/ABI.
+    *) # skip all other options since they don't affect the TQt API/ABI.
 	;;
     esac
 
@@ -2924,7 +2924,7 @@ if [ -f .options ]; then
 fi
 rm -f .options
 
-# QT_NO* defines affect the Qt API (and binary compatibility).  they need
+# QT_NO* defines affect the TQt API (and binary compatibility).  they need
 # to be included in the build key
 for build_option in $D_FLAGS; do
     case "$build_option" in
@@ -3130,11 +3130,11 @@ g++*)
 	This target is using the GNU C++ compiler ($PLATFORM).
 
 	Recent versions of this compiler automatically include code for
-	exceptions, which increase both the size of the Qt library and the
+	exceptions, which increase both the size of the TQt library and the
 	amount of memory taken by your applications.
 
 	You may choose to re-run `basename $0` with the -no-exceptions
-	option to compile Qt without exceptions. This is completely binary
+	option to compile TQt without exceptions. This is completely binary
 	compatible, and existing applications should continue to work.
 
 EOF
@@ -3149,8 +3149,8 @@ cc*)
 	This target is using the MIPSpro C++ compiler ($PLATFORM).
 
 	You may choose to re-run `basename $0` with the -no-exceptions
-	option to compile Qt without exceptions. This will make the
-	size of the Qt library smaller and reduce the amount of memory
+	option to compile TQt without exceptions. This will make the
+	size of the TQt library smaller and reduce the amount of memory
 	taken by your applications.
 
 EOF
@@ -3380,7 +3380,7 @@ EOF
        rm -f .projects.3
     fi
 fi
-# don't sort Qt and MOC in with the other project files
+# don't sort TQt and MOC in with the other project files
 # also work around a segfaulting uniq(1)
 if [ -f .sorted.projects.2 ]; then
     sort .sorted.projects.2 > .sorted.projects.2.new
@@ -3498,7 +3498,7 @@ EOF
 done
 rm -f .projects .projects.3
 
-#Special Qt/Mac thing. We bootched permissions in Qt 3.3.0 beta 1.
+#Special Qt/Mac thing. We bootched permissions in TQt 3.3.0 beta 1.
 #This is probably the only easy place to detect and remove it ourselves
 if [ "$PLATFORM_MAC" = "yes" ]; then
     if [ -d /Library/Qt ]; then
@@ -3534,6 +3534,6 @@ if [ `basename $0` != "config.status" ]; then
 fi
 
 echo
-echo Qt is now configured for building. Just run $MAKE.
+echo TQt is now configured for building. Just run $MAKE.
 echo To reconfigure, run $MAKE confclean and configure.
 echo