Port to CMake, drop Autotools

Signed-off-by: Mavridis Philippe <mavridisf@gmail.com>

49 files changed, 131 insertions, 88583 deletions

diff --git a/CMakeLists.txt b/CMakeLists.txt
new file mode 100644
index 0000000..80bf654
--- /dev/null
+++ b/CMakeLists.txt
@@ -0,0 +1,47 @@
+################################################################################
+# twin-style-mallory                                                           #
+# ------------------                                                           #
+# This file is licensed under the terms of GNU GPL v3 or later.                #
+# Improvements and feedback are welcome.                                       #
+################################################################################
+
+project(twin-style-mallory)
+
+### Includes ###################################################################
+include(FindPkgConfig)
+include(CheckFunctionExists)
+include(CheckSymbolExists)
+include(CheckIncludeFile)
+include(CheckLibraryExists)
+include(CheckCSourceCompiles)
+include(CheckCXXSourceCompiles)
+
+include(TDEMacros)
+include(TDESetupPaths)
+include(TDEVersion)
+
+### Basic project setup ########################################################
+cmake_minimum_required(VERSION ${TDE_CMAKE_MINIMUM_VERSION})
+tde_set_project_version()
+tde_setup_paths()
+
+### Options ####################################################################
+option(WITH_ALL_OPTIONS    "Enable all optional support"    OFF)
+option(WITH_GCC_VISIBILITY "Enable GCC visibility"          ${WITH_ALL_OPTIONS})
+
+### Components #################################################################
+option(BUILD_ALL           "Build all"                      ON)
+option(BUILD_COLORSCHEMES  "Install colorschemes"           ${BUILD_ALL})
+option(BUILD_TCC_MODULE    "Build Control Centre module"    ${BUILD_ALL})
+option(BUILD_TRANSLATIONS  "Build translations"             ${BUILD_ALL})
+
+### Configuration ##############################################################
+include(ConfigureChecks.cmake)
+configure_file(config.h.cmake config.h @ONLY)
+
+### Subdirectories #############################################################
+add_subdirectory(malloryclient)
+tde_conditional_add_subdirectory(BUILD_COLORSCHEMES colorscheme)
+# tde_conditional_add_project_translations()
+
+# kate: indent-width 2; replace-tabs true;
\ No newline at end of file
diff --git a/ConfigureChecks.cmake b/ConfigureChecks.cmake
new file mode 100644
index 0000000..2bc0c0c
--- /dev/null
+++ b/ConfigureChecks.cmake
@@ -0,0 +1,21 @@
+################################################################################
+# twin-style-mallory                                                           #
+# ------------------                                                           #
+# This file is licensed under the terms of GNU GPL v3 or later.                #
+# Improvements and feedback are welcome.                                       #
+################################################################################
+
+### TQt/TDE ####################################################################
+find_package(TQt)
+find_package(TDE)
+tde_setup_architecture_flags()
+tde_setup_largefiles()
+
+### Big Endian #################################################################
+include(TestBigEndian)
+test_big_endian(WORDS_BIGENDIAN)
+
+### GCC visibility #############################################################
+if (WITH_GCC_VISIBILITY)
+  tde_setup_gcc_visibility()
+endif()
\ No newline at end of file
diff --git a/Makefile b/Makefile
deleted file mode 100644
index 874f491..0000000
--- a/Makefile
+++ /dev/null
@@ -1,733 +0,0 @@
-# Makefile.in generated by automake 1.6.3 from Makefile.am.
-# Generated automatically from Makefile.in by config.pl.
-# KDE tags expanded automatically by am_edit - $Revision: 1.373 $ 
-# 
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = /bin/sh
-
-srcdir = .
-top_srcdir = .
-VPATH = .
-prefix = /opt/kde3
-exec_prefix = ${prefix}
-
-bindir = ${exec_prefix}/bin
-sbindir = ${exec_prefix}/sbin
-libexecdir = ${exec_prefix}/libexec
-datadir = ${prefix}/share
-sysconfdir = ${prefix}/etc
-sharedstatedir = ${prefix}/com
-localstatedir = ${prefix}/var
-libdir = ${exec_prefix}/lib
-infodir = ${prefix}/info
-mandir = ${prefix}/man
-includedir = ${prefix}/include
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/mallory
-pkglibdir = $(libdir)/mallory
-pkgincludedir = $(includedir)/mallory
-top_builddir = .
-
-ACLOCAL = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run aclocal-1.6
-AUTOCONF = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoconf
-AUTOMAKE = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run automake-1.6
-AUTOHEADER = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoheader
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /usr/bin/install -c -p
-INSTALL_PROGRAM = ${INSTALL} $(INSTALL_STRIP_FLAG)
-INSTALL_DATA = ${INSTALL} -m 644
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = s,x,x,
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = 
-build_triplet = i686-pc-linux-gnu
-host_alias = 
-host_triplet = i686-pc-linux-gnu
-target_alias = 
-target_triplet = i686-pc-linux-gnu
-
-EXEEXT = 
-OBJEXT = o
-PATH_SEPARATOR = :
-AMTAR = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run tar
-ARTSCCONFIG = /opt/kde3/bin/artsc-config
-AS = @AS@
-AUTODIRS = 
-AWK = gawk
-BROCKENBORING = 
-CC = gcc
-CONF_FILES =  $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in
-CPP = gcc -E
-CXX = g++
-CXXCPP = g++ -E
-DCOPIDL = /opt/kde3/bin/dcopidl
-DCOPIDL2CPP = /opt/kde3/bin/dcopidl2cpp
-DCOP_DEPENDENCIES = $(DCOPIDL)
-DEPDIR = .deps
-DLLTOOL = @DLLTOOL@
-DOXYGEN = @DOXYGEN@
-DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@
-DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@
-DPMSINC = @DPMSINC@
-DPMSLIB = @DPMSLIB@
-ECHO = echo
-FRAMEWORK_COREAUDIO = 
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-GLINC = @GLINC@
-GLLIB = @GLLIB@
-GMSGFMT = /usr/bin/msgfmt
-IDL = @IDL@
-IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-JAR = @JAR@
-JAVAC = @JAVAC@
-JAVAH = @JAVAH@
-JVMLIBS = @JVMLIBS@
-KDECONFIG = /opt/kde3/bin/tde-config
-KDE_EXTRA_RPATH = 
-KDE_HAS_DOXYGEN = @KDE_HAS_DOXYGEN@
-KDE_HAVE_DOT = @KDE_HAVE_DOT@
-KDE_INCLUDES = -I/opt/kde3/include
-KDE_LDFLAGS = -L/opt/kde3/lib
-KDE_MT_LDFLAGS = 
-KDE_MT_LIBS = -lpthread
-KDE_NO_UNDEFINED = 
-KDE_PLUGIN = -avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS)
-KDE_RPATH = -R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries)
-KDE_USE_CLOSURE_FALSE = #
-KDE_USE_CLOSURE_TRUE = 
-KDE_USE_FINAL_FALSE = 
-KDE_USE_FINAL_TRUE = #
-KDE_USE_NMCHECK_FALSE = 
-KDE_USE_NMCHECK_TRUE = #
-KDE_XSL_STYLESHEET = /opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBBZ2 = @LIBBZ2@
-LIBCOMPAT = 
-LIBCRYPT = -lcrypt
-LIBDL = -ldl
-LIBGEN = @LIBGEN@
-LIBJPEG = -ljpeg
-LIBMICO = @LIBMICO@
-LIBOBJS = 
-LIBPNG = -lpng -lz -lm
-LIBPTHREAD = -lpthread
-LIBPYTHON = @LIBPYTHON@
-LIBQIMGIO = @LIBQIMGIO@
-LIBRESOLV = -lresolv
-LIBSHADOW = @LIBSHADOW@
-LIBSM = -lSM -lICE
-LIBSOCKET = 
-LIBSSL = @LIBSSL@
-LIBTIFF = @LIBTIFF@
-LIBTOOL = $(SHELL) $(top_builddir)/libtool --silent
-LIBUCB = 
-LIBUTIL = -lutil
-LIBZ = -lz
-LIB_JASPER = @LIB_JASPER@
-LIB_KAB = -lkab
-LIB_KABC = -ltdeabc
-LIB_TDECORE = -ltdecore
-LIB_TDEPRINT = -ltdeprint
-LIB_TDEUI = -ltdeui
-LIB_KFILE = -ltdeio
-LIB_KFM = 
-LIB_TDEHTML = -ltdehtml
-LIB_KIMGIO = @LIB_KIMGIO@
-LIB_TDEIO = -ltdeio
-LIB_TDEPARTS = -ltdeparts
-LIB_TDESPELL = -ltdespell
-LIB_TDESYCOCA = -ltdeio
-LIB_POLL = 
-LIB_QPE = 
-LIB_QT = -ltqt-mt  $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread
-LIB_QTOPIA = @LIB_QTOPIA@
-LIB_SMB = -lsmb
-LIB_X11 = -lX11 $(LIBSOCKET)
-LIB_XEXT = -lXext
-LN_S = ln -s
-MCOPIDL = /opt/kde3/bin/mcopidl
-MEINPROC = /opt/kde3/bin/meinproc
-MICO_INCLUDES = @MICO_INCLUDES@
-MICO_LDFLAGS = @MICO_LDFLAGS@
-MOC = /usr/lib/qt3/bin/moc
-MSGFMT = /usr/bin/msgfmt
-NOOPT_CFLAGS = -O0
-NOOPT_CXXFLAGS = -O0
-OBJC = @OBJC@
-OBJCFLAGS = @OBJCFLAGS@
-OBJDUMP = @OBJDUMP@
-PACKAGE = mallory
-PAMLIBS = @PAMLIBS@
-PASSWDLIBS = @PASSWDLIBS@
-PYTHONINC = @PYTHONINC@
-PYTHONLIB = @PYTHONLIB@
-PYTHONMODDIR = @PYTHONMODDIR@
-QTDOCDIR = @QTDOCDIR@
-QTE_NORTTI = 
-QTOPIA_INCLUDES = @QTOPIA_INCLUDES@
-QT_INCLUDES = -I/usr/lib/qt3/include
-QT_LDFLAGS = -L/usr/lib/qt3/lib
-RANLIB = ranlib
-RC = @RC@
-SETUIDFLAGS = @SETUIDFLAGS@
-SSL_INCLUDES = @SSL_INCLUDES@
-SSL_LDFLAGS = @SSL_LDFLAGS@
-STRIP = strip
-TOPSUBDIRS =  colorscheme malloryclient
-UIC = /usr/lib/qt3/bin/uic -L $(kde_widgetdir) -nounload
-UIC_TR = tr2i18n
-USER_INCLUDES = 
-USER_LDFLAGS = 
-USE_EXCEPTIONS = -fexceptions
-USE_RTTI = 
-USE_THREADS = 
-VERSION = 1.0
-WOVERLOADED_VIRTUAL = 
-XGETTEXT = /usr/bin/xgettext
-XPMINC = @XPMINC@
-XPMLIB = @XPMLIB@
-X_EXTRA_LIBS = 
-X_INCLUDES = -I/usr/X11R6/include
-X_LDFLAGS = -L/usr/X11R6/lib
-X_PRE_LIBS = 
-X_RPATH = -R $(x_libraries)
-all_includes = -I/opt/kde3/include -I/usr/lib/qt3/include -I/usr/X11R6/include 
-all_libraries = -L/usr/X11R6/lib -L/usr/lib/qt3/lib -L/opt/kde3/lib 
-am__include = include
-am__quote = 
-idldir = @idldir@
-install_sh = /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/install-sh
-jni_includes = @jni_includes@
-kde_appsdir = ${prefix}/share/applnk
-kde_bindir = ${exec_prefix}/bin
-kde_confdir = ${prefix}/share/config
-kde_datadir = ${prefix}/share/apps
-kde_htmldir = ${prefix}/share/doc/HTML
-kde_icondir = ${prefix}/share/icons
-kde_includes = /opt/kde3/include
-kde_libraries = /opt/kde3/lib
-kde_libs_htmldir = /opt/kde3/share/doc/HTML
-kde_libs_prefix = /opt/kde3
-kde_locale = ${prefix}/share/locale
-kde_mimedir = ${prefix}/share/mimelnk
-kde_moduledir = ${libdir}/kde3
-kde_qtver = 3
-kde_servicesdir = ${prefix}/share/services
-kde_servicetypesdir = ${prefix}/share/servicetypes
-kde_sounddir = ${prefix}/share/sounds
-kde_styledir = ${libdir}/kde3/plugins/styles
-kde_templatesdir = ${prefix}/share/templates
-kde_wallpaperdir = ${prefix}/share/wallpapers
-kde_widgetdir = /opt/kde3/lib/kde3/plugins/designer
-tdeinitdir = $(kde_moduledir)
-micodir = @micodir@
-qt_includes = /usr/lib/qt3/include
-qt_libraries = /usr/lib/qt3/lib
-x_includes = /usr/X11R6/include
-x_libraries = /usr/X11R6/lib
-xdg_appsdir = ${datadir}/applications
-xdg_directorydir = ${datadir}/desktop-directories
-SUBDIRS = malloryclient colorscheme
-
-EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO
-
-# not a GNU package. You can remove this line, if
-# have all needed files, that a GNU package needs
-AUTOMAKE_OPTIONS = foreign dist-bzip2
-
-MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-#>- 	uninstall-info-recursive all-recursive install-data-recursive \
-#>- 	install-exec-recursive installdirs-recursive install-recursive \
-#>- 	uninstall-recursive check-recursive installcheck-recursive
-#>+ 4
-#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-#>- 	uninstall-info-recursive all-recursive install-data-recursive \
-#>- 	install-exec-recursive installdirs-recursive install-recursive \
-#>- 	uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive
-#>+ 4
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-	uninstall-info-recursive all-recursive install-data-recursive \
-	install-exec-recursive installdirs-recursive install-recursive \
-	uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive
-DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
-	Makefile.in TODO acinclude.m4 aclocal.m4 admin/compile \
-	admin/config.guess admin/config.sub admin/depcomp \
-	admin/install-sh admin/ltmain.sh admin/missing \
-	admin/mkinstalldirs admin/ylwrap config.h.in configure \
-	configure.in
-DIST_SUBDIRS = $(SUBDIRS)
-#>- all: config.h
-#>+ 1
-all: docs-am  config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno
-$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
-#>- 	cd $(top_srcdir) && \
-#>- 	  $(AUTOMAKE) --foreign  Makefile
-#>+ 3
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-	cd $(top_srcdir) && perl admin/am_edit Makefile.in
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-
-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-#>- 	cd $(srcdir) && $(AUTOCONF)
-#>+ 1
-	cd $(srcdir) && rm -f configure && $(MAKE) -f admin/Makefile.common configure
-
-$(ACLOCAL_M4):  configure.in acinclude.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-
-$(srcdir)/config.h.in:  $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	touch $(srcdir)/config.h.in
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-#>+ 4
-KDE_DIST=stamp-h.in subdirs configure.files Makefile.dist configure.in.in 
-
-DISTFILES= $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
-
-
-top_distdir = .
-distdir = $(PACKAGE)-$(VERSION)
-
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-
-GZIP_ENV = --best
-distcleancheck_listfiles = find . -type f -print
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkinstalldirs) $(distdir)/admin
-	@list='$(DISTFILES)'; for file in $$list; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$(top_distdir)" \
-	        distdir=../$(distdir)/$$subdir \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="${top_distdir}" distdir="$(distdir)" \
-	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	$(am__remove_distdir)
-	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
-	  && cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
-	      || { echo "ERROR: files left after uninstall:" ; \
-	           find $$dc_install_base -type f -print ; \
-	           exit 1; } >&2 ) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
-	  && rm -f $(distdir).tar.gz \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@echo "$(distdir).tar.gz is ready for distribution" | \
-	  sed 'h;s/./=/g;p;x;p;x'
-distcleancheck: distclean
-	if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-#>- clean: clean-recursive
-#>+ 1
-clean: kde-rpo-clean  clean-recursive
-
-#>- clean-am: clean-generic clean-libtool mostlyclean-am
-#>+ 1
-clean-am: clean-bcheck  clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
-	distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf autom4te.cache
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
-	clean-generic clean-libtool clean-recursive dist dist-all \
-	dist-bzip2 dist-gzip distcheck distclean distclean-generic \
-	distclean-hdr distclean-libtool distclean-recursive \
-	distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \
-	info info-am info-recursive install install-am install-data \
-	install-data-am install-data-recursive install-exec \
-	install-exec-am install-exec-recursive install-info \
-	install-info-am install-info-recursive install-man \
-	install-recursive install-strip installcheck installcheck-am \
-	installdirs installdirs-am installdirs-recursive \
-	maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-recursive tags tags-recursive \
-	uninstall uninstall-am uninstall-info-am \
-	uninstall-info-recursive uninstall-recursive
-
-
-$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
-
-$(top_srcdir)/subdirs:
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
-
-$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
-	@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
-
-package-messages:
-	$(MAKE) -f admin/Makefile.common package-messages
-	$(MAKE) -C po merge
-
-dist-hook:
-	cd $(top_distdir) && perl admin/am_edit -padmin
-	cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
-#_SOURCES =  malloryclient.h malloryclient.cpp
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-
-
-
-
-
-
-
-#>+ 2
-docs-am:
-
-#>+ 6
-force-reedit:
-		cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-	cd $(top_srcdir) && perl admin/am_edit Makefile.in
-
-
-#>+ 20
-clean-bcheck: 
-	rm -f *.bchecktest.cc *.bchecktest.cc.class
-
-bcheck: bcheck-recursive
-
-bcheck-am:
-	@for i in ; do \
-	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
-	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
-	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
-	        echo "$$i"; \
-	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy $$i.bchecktest.cc; then \
-	            rm -f $$i.bchecktest.cc; exit 1; \
-	        fi ; \
-	        echo "" >> $$i.bchecktest.cc.class; \
-	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
-	    fi ; \
-	done
-
-
-#>+ 2
-final:
-	$(MAKE) all-am
-#>+ 2
-final-install:
-	$(MAKE) install-am
-#>+ 2
-no-final:
-	$(MAKE) all-am
-#>+ 2
-no-final-install:
-	$(MAKE) install-am
-#>+ 3
-cvs-clean:
-	$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean
-
-#>+ 3
-kde-rpo-clean:
-	-rm -f *.rpo
-
-#>+ 3
-nmcheck: 
-nmcheck-am: nmcheck
diff --git a/Makefile.am b/Makefile.am
deleted file mode 100644
index 763d49e..0000000
--- a/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-SUBDIRS = malloryclient colorscheme
-
-EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO
-
-# not a GNU package. You can remove this line, if
-# have all needed files, that a GNU package needs
-AUTOMAKE_OPTIONS = foreign dist-bzip2
-
-$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
-
-$(top_srcdir)/subdirs:
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
-
-$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
-	@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
-
-MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
-
-package-messages:
-	$(MAKE) -f admin/Makefile.common package-messages
-	$(MAKE) -C po merge
-
-dist-hook:
-	cd $(top_distdir) && perl admin/am_edit -padmin
-	cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
-#_SOURCES =  malloryclient.h malloryclient.cpp
\ No newline at end of file
diff --git a/Makefile.dist b/Makefile.dist
deleted file mode 100644
index e12528e..0000000
--- a/Makefile.dist
+++ /dev/null
@@ -1,14 +0,0 @@
-
-all:
-	@echo "This Makefile is only for the CVS repository"
-	@echo ""
-	@if test ! -d admin; then \
-	   echo "Please recheckout this module!" ;\
-	   echo "for cvs: use checkout once and after that update again" ;\
-	   echo "for cvsup: checkout kde-common from cvsup and" ;\
-	   echo "   link kde-common/admin to ./admin" ;\
-	   exit 1 ;\
-	fi
-	$(MAKE) -f admin/Makefile.common cvs
-
-.SILENT:
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 29f1644..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,732 +0,0 @@
-# Makefile.in generated by automake 1.6.3 from Makefile.am.
-# KDE tags expanded automatically by am_edit - $Revision: 1.373 $ 
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
-host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-AMTAR = @AMTAR@
-ARTSCCONFIG = @ARTSCCONFIG@
-AS = @AS@
-AUTODIRS = @AUTODIRS@
-AWK = @AWK@
-BROCKENBORING = @BROCKENBORING@
-CC = @CC@
-CONF_FILES = @CONF_FILES@
-CPP = @CPP@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DCOPIDL = @DCOPIDL@
-DCOPIDL2CPP = @DCOPIDL2CPP@
-DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DOXYGEN = @DOXYGEN@
-DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@
-DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@
-DPMSINC = @DPMSINC@
-DPMSLIB = @DPMSLIB@
-ECHO = @ECHO@
-FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-GLINC = @GLINC@
-GLLIB = @GLLIB@
-GMSGFMT = @GMSGFMT@
-IDL = @IDL@
-IDL_DEPENDENCIES = @IDL_DEPENDENCIES@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-JAR = @JAR@
-JAVAC = @JAVAC@
-JAVAH = @JAVAH@
-JVMLIBS = @JVMLIBS@
-KDECONFIG = @KDECONFIG@
-KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
-KDE_HAS_DOXYGEN = @KDE_HAS_DOXYGEN@
-KDE_HAVE_DOT = @KDE_HAVE_DOT@
-KDE_INCLUDES = @KDE_INCLUDES@
-KDE_LDFLAGS = @KDE_LDFLAGS@
-KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@
-KDE_MT_LIBS = @KDE_MT_LIBS@
-KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@
-KDE_PLUGIN = @KDE_PLUGIN@
-KDE_RPATH = @KDE_RPATH@
-KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
-KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
-KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
-KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
-KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@
-KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@
-KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBBZ2 = @LIBBZ2@
-LIBCOMPAT = @LIBCOMPAT@
-LIBCRYPT = @LIBCRYPT@
-LIBDL = @LIBDL@
-LIBGEN = @LIBGEN@
-LIBJPEG = @LIBJPEG@
-LIBMICO = @LIBMICO@
-LIBOBJS = @LIBOBJS@
-LIBPNG = @LIBPNG@
-LIBPTHREAD = @LIBPTHREAD@
-LIBPYTHON = @LIBPYTHON@
-LIBQIMGIO = @LIBQIMGIO@
-LIBRESOLV = @LIBRESOLV@
-LIBSHADOW = @LIBSHADOW@
-LIBSM = @LIBSM@
-LIBSOCKET = @LIBSOCKET@
-LIBSSL = @LIBSSL@
-LIBTIFF = @LIBTIFF@
-LIBTOOL = @LIBTOOL@
-LIBUCB = @LIBUCB@
-LIBUTIL = @LIBUTIL@
-LIBZ = @LIBZ@
-LIB_JASPER = @LIB_JASPER@
-LIB_KAB = @LIB_KAB@
-LIB_KABC = @LIB_KABC@
-LIB_TDECORE = @LIB_TDECORE@
-LIB_TDEPRINT = @LIB_TDEPRINT@
-LIB_TDEUI = @LIB_TDEUI@
-LIB_KFILE = @LIB_KFILE@
-LIB_KFM = @LIB_KFM@
-LIB_TDEHTML = @LIB_TDEHTML@
-LIB_KIMGIO = @LIB_KIMGIO@
-LIB_TDEIO = @LIB_TDEIO@
-LIB_TDEPARTS = @LIB_TDEPARTS@
-LIB_TDESPELL = @LIB_TDESPELL@
-LIB_TDESYCOCA = @LIB_TDESYCOCA@
-LIB_POLL = @LIB_POLL@
-LIB_QPE = @LIB_QPE@
-LIB_QT = @LIB_QT@
-LIB_QTOPIA = @LIB_QTOPIA@
-LIB_SMB = @LIB_SMB@
-LIB_X11 = @LIB_X11@
-LIB_XEXT = @LIB_XEXT@
-LN_S = @LN_S@
-MCOPIDL = @MCOPIDL@
-MEINPROC = @MEINPROC@
-MICO_INCLUDES = @MICO_INCLUDES@
-MICO_LDFLAGS = @MICO_LDFLAGS@
-MOC = @MOC@
-MSGFMT = @MSGFMT@
-NOOPT_CFLAGS = @NOOPT_CFLAGS@
-NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
-OBJC = @OBJC@
-OBJCFLAGS = @OBJCFLAGS@
-OBJDUMP = @OBJDUMP@
-PACKAGE = @PACKAGE@
-PAMLIBS = @PAMLIBS@
-PASSWDLIBS = @PASSWDLIBS@
-PYTHONINC = @PYTHONINC@
-PYTHONLIB = @PYTHONLIB@
-PYTHONMODDIR = @PYTHONMODDIR@
-QTDOCDIR = @QTDOCDIR@
-QTE_NORTTI = @QTE_NORTTI@
-QTOPIA_INCLUDES = @QTOPIA_INCLUDES@
-QT_INCLUDES = @QT_INCLUDES@
-QT_LDFLAGS = @QT_LDFLAGS@
-RANLIB = @RANLIB@
-RC = @RC@
-SETUIDFLAGS = @SETUIDFLAGS@
-SSL_INCLUDES = @SSL_INCLUDES@
-SSL_LDFLAGS = @SSL_LDFLAGS@
-STRIP = @STRIP@
-TOPSUBDIRS = @TOPSUBDIRS@
-UIC = @UIC@
-UIC_TR = @UIC_TR@
-USER_INCLUDES = @USER_INCLUDES@
-USER_LDFLAGS = @USER_LDFLAGS@
-USE_EXCEPTIONS = @USE_EXCEPTIONS@
-USE_RTTI = @USE_RTTI@
-USE_THREADS = @USE_THREADS@
-VERSION = @VERSION@
-WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
-XGETTEXT = @XGETTEXT@
-XPMINC = @XPMINC@
-XPMLIB = @XPMLIB@
-X_EXTRA_LIBS = @X_EXTRA_LIBS@
-X_INCLUDES = @X_INCLUDES@
-X_LDFLAGS = @X_LDFLAGS@
-X_PRE_LIBS = @X_PRE_LIBS@
-X_RPATH = @X_RPATH@
-all_includes = @all_includes@
-all_libraries = @all_libraries@
-am__include = @am__include@
-am__quote = @am__quote@
-idldir = @idldir@
-install_sh = @install_sh@
-jni_includes = @jni_includes@
-kde_appsdir = @kde_appsdir@
-kde_bindir = @kde_bindir@
-kde_confdir = @kde_confdir@
-kde_datadir = @kde_datadir@
-kde_htmldir = @kde_htmldir@
-kde_icondir = @kde_icondir@
-kde_includes = @kde_includes@
-kde_libraries = @kde_libraries@
-kde_libs_htmldir = @kde_libs_htmldir@
-kde_libs_prefix = @kde_libs_prefix@
-kde_locale = @kde_locale@
-kde_mimedir = @kde_mimedir@
-kde_moduledir = @kde_moduledir@
-kde_qtver = @kde_qtver@
-kde_servicesdir = @kde_servicesdir@
-kde_servicetypesdir = @kde_servicetypesdir@
-kde_sounddir = @kde_sounddir@
-kde_styledir = @kde_styledir@
-kde_templatesdir = @kde_templatesdir@
-kde_wallpaperdir = @kde_wallpaperdir@
-kde_widgetdir = @kde_widgetdir@
-tdeinitdir = @tdeinitdir@
-micodir = @micodir@
-qt_includes = @qt_includes@
-qt_libraries = @qt_libraries@
-x_includes = @x_includes@
-x_libraries = @x_libraries@
-xdg_appsdir = @xdg_appsdir@
-xdg_directorydir = @xdg_directorydir@
-SUBDIRS = malloryclient colorscheme
-
-EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO
-
-# not a GNU package. You can remove this line, if
-# have all needed files, that a GNU package needs
-AUTOMAKE_OPTIONS = foreign dist-bzip2
-
-MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-#>- 	uninstall-info-recursive all-recursive install-data-recursive \
-#>- 	install-exec-recursive installdirs-recursive install-recursive \
-#>- 	uninstall-recursive check-recursive installcheck-recursive
-#>+ 4
-#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-#>- 	uninstall-info-recursive all-recursive install-data-recursive \
-#>- 	install-exec-recursive installdirs-recursive install-recursive \
-#>- 	uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive
-#>+ 4
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-	uninstall-info-recursive all-recursive install-data-recursive \
-	install-exec-recursive installdirs-recursive install-recursive \
-	uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive
-DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
-	Makefile.in TODO acinclude.m4 aclocal.m4 admin/compile \
-	admin/config.guess admin/config.sub admin/depcomp \
-	admin/install-sh admin/ltmain.sh admin/missing \
-	admin/mkinstalldirs admin/ylwrap config.h.in configure \
-	configure.in
-DIST_SUBDIRS = $(SUBDIRS)
-#>- all: config.h
-#>+ 1
-all: docs-am  config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno
-$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
-#>- 	cd $(top_srcdir) && \
-#>- 	  $(AUTOMAKE) --foreign  Makefile
-#>+ 3
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-	cd $(top_srcdir) && perl admin/am_edit Makefile.in
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-
-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-#>- 	cd $(srcdir) && $(AUTOCONF)
-#>+ 1
-	cd $(srcdir) && rm -f configure && $(MAKE) -f admin/Makefile.common configure
-
-$(ACLOCAL_M4):  configure.in acinclude.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-
-$(srcdir)/config.h.in:  $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	touch $(srcdir)/config.h.in
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-#>+ 4
-KDE_DIST=stamp-h.in subdirs configure.files Makefile.dist configure.in.in 
-
-DISTFILES= $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
-
-
-top_distdir = .
-distdir = $(PACKAGE)-$(VERSION)
-
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-
-GZIP_ENV = --best
-distcleancheck_listfiles = find . -type f -print
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkinstalldirs) $(distdir)/admin
-	@list='$(DISTFILES)'; for file in $$list; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$(top_distdir)" \
-	        distdir=../$(distdir)/$$subdir \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="${top_distdir}" distdir="$(distdir)" \
-	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	$(am__remove_distdir)
-	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
-	  && cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
-	      || { echo "ERROR: files left after uninstall:" ; \
-	           find $$dc_install_base -type f -print ; \
-	           exit 1; } >&2 ) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
-	  && rm -f $(distdir).tar.gz \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@echo "$(distdir).tar.gz is ready for distribution" | \
-	  sed 'h;s/./=/g;p;x;p;x'
-distcleancheck: distclean
-	if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-#>- clean: clean-recursive
-#>+ 1
-clean: kde-rpo-clean  clean-recursive
-
-#>- clean-am: clean-generic clean-libtool mostlyclean-am
-#>+ 1
-clean-am: clean-bcheck  clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
-	distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf autom4te.cache
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
-	clean-generic clean-libtool clean-recursive dist dist-all \
-	dist-bzip2 dist-gzip distcheck distclean distclean-generic \
-	distclean-hdr distclean-libtool distclean-recursive \
-	distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \
-	info info-am info-recursive install install-am install-data \
-	install-data-am install-data-recursive install-exec \
-	install-exec-am install-exec-recursive install-info \
-	install-info-am install-info-recursive install-man \
-	install-recursive install-strip installcheck installcheck-am \
-	installdirs installdirs-am installdirs-recursive \
-	maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-recursive tags tags-recursive \
-	uninstall uninstall-am uninstall-info-am \
-	uninstall-info-recursive uninstall-recursive
-
-
-$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
-
-$(top_srcdir)/subdirs:
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
-
-$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
-	@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
-
-package-messages:
-	$(MAKE) -f admin/Makefile.common package-messages
-	$(MAKE) -C po merge
-
-dist-hook:
-	cd $(top_distdir) && perl admin/am_edit -padmin
-	cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
-#_SOURCES =  malloryclient.h malloryclient.cpp
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-
-
-
-
-
-
-
-#>+ 2
-docs-am:
-
-#>+ 6
-force-reedit:
-		cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-	cd $(top_srcdir) && perl admin/am_edit Makefile.in
-
-
-#>+ 20
-clean-bcheck: 
-	rm -f *.bchecktest.cc *.bchecktest.cc.class
-
-bcheck: bcheck-recursive
-
-bcheck-am:
-	@for i in ; do \
-	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
-	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
-	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
-	        echo "$$i"; \
-	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy $$i.bchecktest.cc; then \
-	            rm -f $$i.bchecktest.cc; exit 1; \
-	        fi ; \
-	        echo "" >> $$i.bchecktest.cc.class; \
-	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
-	    fi ; \
-	done
-
-
-#>+ 2
-final:
-	$(MAKE) all-am
-#>+ 2
-final-install:
-	$(MAKE) install-am
-#>+ 2
-no-final:
-	$(MAKE) all-am
-#>+ 2
-no-final-install:
-	$(MAKE) install-am
-#>+ 3
-cvs-clean:
-	$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean
-
-#>+ 3
-kde-rpo-clean:
-	-rm -f *.rpo
-
-#>+ 3
-nmcheck: 
-nmcheck-am: nmcheck
diff --git a/acinclude.m4 b/acinclude.m4
deleted file mode 100644
index 947048e..0000000
--- a/acinclude.m4
+++ /dev/null
@@ -1,10870 +0,0 @@
-##   -*- autoconf -*-
-
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu)
-dnl              (C) 1997,98,99 Stephan Kulow (coolo@kde.org)
-
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
-
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
-
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-dnl    Boston, MA 02111-1307, USA.
-
-dnl IMPORTANT NOTE:
-dnl Please do not modify this file unless you expect your modifications to be
-dnl carried into every other module in the repository. 
-dnl
-dnl Single-module modifications are best placed in configure.in for tdelibs
-dnl and tdebase or configure.in.in if present.
-
-# KDE_PATH_X_DIRECT
-dnl Internal subroutine of AC_PATH_X.
-dnl Set ac_x_includes and/or ac_x_libraries.
-AC_DEFUN(KDE_PATH_X_DIRECT,
-[
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-if test "$ac_x_includes" = NO; then
-  # Guess where to find include files, by looking for this one X11 .h file.
-  test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
-  # First, try using that file with no special directory specified.
-AC_TRY_CPP([#include <$x_direct_test_include>],
-[# We can compile using X headers with no special include directory.
-ac_x_includes=],
-[# Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-  for ac_dir in               \
-    /usr/X11/include          \
-    /usr/X11R6/include        \
-    /usr/X11R5/include        \
-    /usr/X11R4/include        \
-                              \
-    /usr/include/X11          \
-    /usr/include/X11R6        \
-    /usr/include/X11R5        \
-    /usr/include/X11R4        \
-                              \
-    /usr/local/X11/include    \
-    /usr/local/X11R6/include  \
-    /usr/local/X11R5/include  \
-    /usr/local/X11R4/include  \
-                              \
-    /usr/local/include/X11    \
-    /usr/local/include/X11R6  \
-    /usr/local/include/X11R5  \
-    /usr/local/include/X11R4  \
-                              \
-    /usr/X386/include         \
-    /usr/x386/include         \
-    /usr/XFree86/include/X11  \
-                              \
-    /usr/include              \
-    /usr/local/include        \
-    /usr/unsupported/include  \
-    /usr/athena/include       \
-    /usr/local/x11r5/include  \
-    /usr/lpp/Xamples/include  \
-                              \
-    /usr/openwin/include      \
-    /usr/openwin/share/include \
-    ; \
-  do
-    if test -r "$ac_dir/$x_direct_test_include"; then
-      ac_x_includes=$ac_dir
-      break
-    fi
-  done])
-fi # $ac_x_includes = NO
-
-if test "$ac_x_libraries" = NO; then
-  # Check for the libraries.
-
-  test -z "$x_direct_test_library" && x_direct_test_library=Xt
-  test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
-  # See if we find them without any special options.
-  # Don't add to $LIBS permanently.
-  ac_save_LIBS="$LIBS"
-  LIBS="-l$x_direct_test_library $LIBS"
-AC_TRY_LINK(, [${x_direct_test_function}()],
-[LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=],
-[LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \
-    /usr/X11/lib${tdelibsuff}           \
-    /usr/X11R6/lib${tdelibsuff}         \
-    /usr/X11R5/lib${tdelibsuff}         \
-    /usr/X11R4/lib${tdelibsuff}         \
-                                        \
-    /usr/lib${tdelibsuff}/X11           \
-    /usr/lib${tdelibsuff}/X11R6         \
-    /usr/lib${tdelibsuff}/X11R5         \
-    /usr/lib${tdelibsuff}/X11R4         \
-                                        \
-    /usr/local/X11/lib${tdelibsuff}     \
-    /usr/local/X11R6/lib${tdelibsuff}   \
-    /usr/local/X11R5/lib${tdelibsuff}   \
-    /usr/local/X11R4/lib${tdelibsuff}   \
-                                        \
-    /usr/local/lib${tdelibsuff}/X11     \
-    /usr/local/lib${tdelibsuff}/X11R6   \
-    /usr/local/lib${tdelibsuff}/X11R5   \
-    /usr/local/lib${tdelibsuff}/X11R4   \
-                                        \
-    /usr/X386/lib${tdelibsuff}          \
-    /usr/x386/lib${tdelibsuff}          \
-    /usr/XFree86/lib${tdelibsuff}/X11   \
-                                        \
-    /usr/lib${tdelibsuff}               \
-    /usr/local/lib${tdelibsuff}         \
-    /usr/unsupported/lib${tdelibsuff}   \
-    /usr/athena/lib${tdelibsuff}        \
-    /usr/local/x11r5/lib${tdelibsuff}   \
-    /usr/lpp/Xamples/lib${tdelibsuff}   \
-    /lib/usr/lib${tdelibsuff}/X11       \
-                                        \
-    /usr/openwin/lib${tdelibsuff}       \
-    /usr/openwin/share/lib${tdelibsuff} \
-    ; \
-do
-dnl Don't even attempt the hair of trying to link an X program!
-  for ac_extension in a so sl; do
-    if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
-      ac_x_libraries=$ac_dir
-      break 2
-    fi
-  done
-done])
-fi # $ac_x_libraries = NO
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Find a file (or one of more files in a list of dirs)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_FIND_FILE,
-[
-$3=NO
-for i in $2;
-do
-  for j in $1;
-  do
-    echo "configure: __oline__: $i/$j" >&AC_FD_CC
-    if test -r "$i/$j"; then
-      echo "taking that" >&AC_FD_CC
-      $3=$i
-      break 2
-    fi
-  done
-done
-])
-
-dnl KDE_FIND_PATH(programm-name, variable-name, list of directories,
-dnl	if-not-found, test-parameter)
-AC_DEFUN(KDE_FIND_PATH,
-[
-   AC_MSG_CHECKING([for $1])
-   if test -n "$$2"; then
-        kde_cv_path="$$2";
-   else
-        kde_cache=`echo $1 | sed 'y%./+-%__p_%'`
-
-        AC_CACHE_VAL(kde_cv_path_$kde_cache,
-        [
-        kde_cv_path="NONE"
-	dirs="$3"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/$1"; then
-	    if test -n "$5"
-	    then
-              evalstr="$dir/$1 $5 2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/$1"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/$1"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-        ])
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      AC_MSG_RESULT(not found)
-      $4
-   else
-      AC_MSG_RESULT($kde_cv_path)
-      $2=$kde_cv_path
-
-   fi
-])
-
-AC_DEFUN(KDE_MOC_ERROR_MESSAGE,
-[
-    AC_MSG_ERROR([No Qt meta object compiler (moc) found!
-Please check whether you installed Qt correctly.
-You need to have a running moc binary.
-configure tried to run $ac_cv_path_moc and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable MOC to the right one before running
-configure.
-])
-])
-
-AC_DEFUN(KDE_UIC_ERROR_MESSAGE,
-[
-    AC_MSG_WARN([No Qt ui compiler (uic) found!
-Please check whether you installed Qt correctly.
-You need to have a running uic binary.
-configure tried to run $ac_cv_path_uic and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable UIC to the right one before running
-configure.
-])
-])
-
-
-AC_DEFUN(KDE_CHECK_UIC_FLAG,
-[
-    AC_MSG_CHECKING([whether uic supports -$1 ])
-    kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'`
-    AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache,
-    [
-        cat >conftest.ui <<EOT
-        <!DOCTYPE UI><UI version="3" stdsetdef="1"></UI>
-EOT
-        ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null"
-        if AC_TRY_EVAL(ac_uic_testrun); then
-            eval "kde_cv_prog_uic_$kde_cache=yes"
-        else
-            eval "kde_cv_prog_uic_$kde_cache=no"
-        fi
-        rm -f conftest*
-    ])
-
-    if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then
-        AC_MSG_RESULT([yes])
-        :
-        $3
-    else
-        AC_MSG_RESULT([no])
-        :
-        $4
-    fi
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Find the meta object compiler and the ui compiler in the PATH,
-dnl in $QTDIR/bin, and some more usual places
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_PATH_QT_MOC_UIC,
-[
-   qt_bindirs=""
-   for dir in $kde_qt_dirs; do
-      qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
-   done
-   qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
-   if test ! "$ac_qt_bindir" = "NO"; then
-      qt_bindirs="$ac_qt_bindir $qt_bindirs"
-   fi
-
-   KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE])
-   if test -z "$UIC_NOT_NEEDED"; then
-     KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""])
-     if test -z "$UIC_PATH" ; then
-       KDE_UIC_ERROR_MESSAGE
-       exit 1
-     elif test $kde_qtver = 3; then
-       KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no)
-       KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no)
-
-       UIC=$UIC_PATH
-       if test x$ac_uic_supports_libpath = xyes; then
-           UIC="$UIC -L \$(kde_widgetdir)"
-       fi
-       if test x$ac_uic_supports_nounload = xyes; then
-           UIC="$UIC -nounload"
-       fi
-     fi
-   else
-     UIC="echo uic not available: "
-   fi
-
-   AC_SUBST(MOC)
-   AC_SUBST(UIC)
-
-   UIC_TR="i18n"
-   if test $kde_qtver = 3; then
-     UIC_TR="tr2i18n"
-   fi
-
-   AC_SUBST(UIC_TR)
-])
-
-AC_DEFUN(KDE_1_CHECK_PATHS,
-[
-  KDE_1_CHECK_PATH_HEADERS
-
-  KDE_TEST_RPATH=
-
-  if test -n "$USE_RPATH"; then
-
-     if test -n "$kde_libraries"; then
-       KDE_TEST_RPATH="-R $kde_libraries"
-     fi
-
-     if test -n "$qt_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
-     fi
-
-     if test -n "$x_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
-     fi
-
-     KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
-  fi
-
-AC_MSG_CHECKING([for KDE libraries installed])
-ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5'
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  AC_MSG_RESULT(yes)
-else
-  AC_MSG_ERROR([your system fails at linking a small KDE application!
-Check, if your compiler is installed correctly and if you have used the
-same compiler to compile Qt and tdelibs as you did use now.
-For more details about this problem, look at the end of config.log.])
-fi
-
-if eval `TDEDIR= ./conftest 2>&5`; then
-  kde_result=done
-else
-  kde_result=problems
-fi
-
-TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
-kde_have_all_paths=yes
-
-KDE_SET_PATHS($kde_result)
-
-])
-
-AC_DEFUN(KDE_SET_PATHS,
-[
-  kde_cv_all_paths="kde_have_all_paths=\"yes\" \
-	kde_htmldir=\"$kde_htmldir\" \
-	kde_appsdir=\"$kde_appsdir\" \
-	kde_icondir=\"$kde_icondir\" \
-	kde_sounddir=\"$kde_sounddir\" \
-	kde_datadir=\"$kde_datadir\" \
-	kde_locale=\"$kde_locale\" \
-	kde_cgidir=\"$kde_cgidir\" \
-	kde_confdir=\"$kde_confdir\" \
-	kde_mimedir=\"$kde_mimedir\" \
-	kde_toolbardir=\"$kde_toolbardir\" \
-	kde_wallpaperdir=\"$kde_wallpaperdir\" \
-	kde_templatesdir=\"$kde_templatesdir\" \
-	kde_bindir=\"$kde_bindir\" \
-	kde_servicesdir=\"$kde_servicesdir\" \
-	kde_servicetypesdir=\"$kde_servicetypesdir\" \
-	kde_moduledir=\"$kde_moduledir\" \
-	kde_styledir=\"$kde_styledir\" \
-	kde_widgetdir=\"$kde_widgetdir\" \
-	xdg_appsdir=\"$xdg_appsdir\" \
-	xdg_directorydir=\"$xdg_directorydir\" \
-	kde_result=$1"
-])
-
-AC_DEFUN(KDE_SET_DEFAULT_PATHS,
-[
-if test "$1" = "default"; then
-
-  if test -z "$kde_htmldir"; then
-    kde_htmldir='\${prefix}/share/doc/HTML'
-  fi
-  if test -z "$kde_appsdir"; then
-    kde_appsdir='\${prefix}/share/applnk'
-  fi
-  if test -z "$kde_icondir"; then
-    kde_icondir='\${prefix}/share/icons'
-  fi
-  if test -z "$kde_sounddir"; then
-    kde_sounddir='\${prefix}/share/sounds'
-  fi
-  if test -z "$kde_datadir"; then
-    kde_datadir='\${prefix}/share/apps'
-  fi
-  if test -z "$kde_locale"; then
-    kde_locale='\${prefix}/share/locale'
-  fi
-  if test -z "$kde_cgidir"; then
-    kde_cgidir='\${exec_prefix}/cgi-bin'
-  fi
-  if test -z "$kde_confdir"; then
-    kde_confdir='\${prefix}/share/config'
-  fi
-  if test -z "$kde_mimedir"; then
-    kde_mimedir='\${prefix}/share/mimelnk'
-  fi
-  if test -z "$kde_toolbardir"; then
-    kde_toolbardir='\${prefix}/share/toolbar'
-  fi
-  if test -z "$kde_wallpaperdir"; then
-    kde_wallpaperdir='\${prefix}/share/wallpapers'
-  fi
-  if test -z "$kde_templatesdir"; then
-    kde_templatesdir='\${prefix}/share/templates'
-  fi
-  if test -z "$kde_bindir"; then
-    kde_bindir='\${exec_prefix}/bin'
-  fi
-  if test -z "$kde_servicesdir"; then
-    kde_servicesdir='\${prefix}/share/services'
-  fi
-  if test -z "$kde_servicetypesdir"; then
-    kde_servicetypesdir='\${prefix}/share/servicetypes'
-  fi
-  if test -z "$kde_moduledir"; then
-    if test "$kde_qtver" = "2"; then
-      kde_moduledir='\${libdir}/kde2'
-    else
-      kde_moduledir='\${libdir}/kde3'
-    fi
-  fi
-  if test -z "$kde_styledir"; then
-    kde_styledir='\${libdir}/kde3/plugins/styles'
-  fi
-  if test -z "$kde_widgetdir"; then
-    kde_widgetdir='\${libdir}/kde3/plugins/designer'
-  fi
-  if test -z "$xdg_appsdir"; then
-    xdg_appsdir='\${datadir}/applications'
-  fi
-  if test -z "$xdg_directorydir"; then
-    xdg_directorydir='\${datadir}/desktop-directories'
-  fi
-
-  KDE_SET_PATHS(defaults)
-
-else
-
-  if test $kde_qtver = 1; then
-     AC_MSG_RESULT([compiling])
-     KDE_1_CHECK_PATHS
-  else
-     AC_MSG_ERROR([path checking not yet supported for KDE 2])
-  fi
-
-fi
-])
-
-AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS,
-[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
-   test -z "$kde_icondir" || test -z "$kde_sounddir" ||
-   test -z "$kde_datadir" || test -z "$kde_locale"  ||
-   test -z "$kde_cgidir"  || test -z "$kde_confdir" ||
-   test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
-   test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
-   test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
-   test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
-   test -z "$kde_styledir" || test -z "kde_widgetdir" ||
-   test -z "$xdg_appsdir" || test -z "xdg_directorydir" 
-   test "x$kde_have_all_paths" != "xyes"; then
-     kde_have_all_paths=no
-  fi
-])
-
-AC_DEFUN(KDE_MISSING_PROG_ERROR,
-[
-    AC_MSG_ERROR([The important program $1 was not found!
-Please check whether you installed KDE correctly.
-])
-])
-
-AC_DEFUN(KDE_MISSING_ARTS_ERROR,
-[
-    AC_MSG_ERROR([The important program $1 was not found!
-Please check whether you installed aRts correctly.
-])
-])
-
-AC_DEFUN(KDE_SUBST_PROGRAMS,
-[
-    AC_ARG_WITH(arts,
-        [  --without-arts        build without aRts [default=detect] ],
-        [build_arts=$withval],
-        [build_arts=yes]
-    )
-    AM_CONDITIONAL(include_ARTS, test "$build_arts" != "no")
-
-        kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin"
-        test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs"
-        if test -n "$TDEDIRS"; then
-           kde_save_IFS=$IFS
-           IFS=:
-           for dir in $TDEDIRS; do
-                kde_default_bindirs="$dir/bin $kde_default_bindirs "
-           done
-           IFS=$kde_save_IFS
-        fi
-        kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
-        KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)])
-        KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)])
-        if test "$build_arts" != "no"; then
-          KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)])
-          KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)])
-        fi
-        KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs])
-	KDE_FIND_PATH(brockenboring, BROCKENBORING, [$kde_default_bindirs])
-	if test -n "$BROCKENBORING"; then
-		KDE_FIND_PATH(tdeinit_wrapper, BROCKENBORING, [$kde_default_bindirs])
-	fi
-        KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs])
-
-        if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then  
- 	    kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share"
-            test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs"
-            AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET)
-	    if test "$KDE_XSL_STYLESHEET" = "NO"; then
-		KDE_XSL_STYLESHEET=""
-	    else
-                KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl"
-	    fi
-        fi
-
-        DCOP_DEPENDENCIES='$(DCOPIDL)'
-        AC_SUBST(DCOPIDL)
-        AC_SUBST(DCOPIDL2CPP)
-        AC_SUBST(DCOP_DEPENDENCIES)
-        AC_SUBST(MCOPIDL)
-        AC_SUBST(ARTSCCONFIG)
-        AC_SUBST(KDECONFIG)
-        AC_SUBST(BROCKENBORING)
-	AC_SUBST(MEINPROC)
- 	AC_SUBST(KDE_XSL_STYLESHEET)
-
-        if test -x "$KDECONFIG"; then # it can be "compiled"
-          kde_libs_prefix=`$KDECONFIG --prefix`
-          if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
-               AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs.
-                          This means it has been moved since you installed it.
-                          This won't work. Please recompile tdelibs for the new prefix.
-                          ])
-           fi
-           kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
-        else
-           kde_libs_prefix='$(prefix)'
-           kde_libs_htmldir='$(kde_htmldir)'
-        fi
-        AC_SUBST(kde_libs_prefix)
-        AC_SUBST(kde_libs_htmldir)
-])dnl
-
-AC_DEFUN(AC_CREATE_KFSSTND,
-[
-AC_REQUIRE([AC_CHECK_RPATH])
-
-AC_MSG_CHECKING([for KDE paths])
-kde_result=""
-kde_cached_paths=yes
-AC_CACHE_VAL(kde_cv_all_paths,
-[
-  KDE_SET_DEFAULT_PATHS($1)
-  kde_cached_paths=no
-])
-eval "$kde_cv_all_paths"
-KDE_CHECK_PATHS_FOR_COMPLETENESS
-if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
-  # wrong values were cached, may be, we can set better ones
-  kde_result=
-  kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
-  kde_datadir= kde_locale=  kde_cgidir=  kde_confdir=
-  kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
-  kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
-  kde_have_all_paths=
-  kde_styledir=
-  kde_widgetdir=
-  xdg_appsdir = xdg_directorydir=
-  KDE_SET_DEFAULT_PATHS($1)
-  eval "$kde_cv_all_paths"
-  KDE_CHECK_PATHS_FOR_COMPLETENESS
-  kde_result="$kde_result (cache overridden)"
-fi
-if test "$kde_have_all_paths" = "no"; then
-  AC_MSG_ERROR([configure could not run a little KDE program to test the environment.
-Since it had compiled and linked before, it must be a strange problem on your system.
-Look at config.log for details. If you are not able to fix this, look at
-http://www.kde.org/faq/installation.html or any www.kde.org mirror.
-(If you're using an egcs version on Linux, you may update binutils!)
-])
-else
-  rm -f conftest*
-  AC_MSG_RESULT($kde_result)
-fi
-
-bindir=$kde_bindir
-
-KDE_SUBST_PROGRAMS
-
-])
-
-AC_DEFUN(AC_SUBST_KFSSTND,
-[
-AC_SUBST(kde_htmldir)
-AC_SUBST(kde_appsdir)
-AC_SUBST(kde_icondir)
-AC_SUBST(kde_sounddir)
-AC_SUBST(kde_datadir)
-AC_SUBST(kde_locale)
-AC_SUBST(kde_confdir)
-AC_SUBST(kde_mimedir)
-AC_SUBST(kde_wallpaperdir)
-AC_SUBST(kde_bindir)
-dnl X Desktop Group standards
-AC_SUBST(xdg_appsdir)
-AC_SUBST(xdg_directorydir)
-dnl for KDE 2
-AC_SUBST(kde_templatesdir)
-AC_SUBST(kde_servicesdir)
-AC_SUBST(kde_servicetypesdir)
-AC_SUBST(kde_moduledir)
-AC_SUBST(tdeinitdir, '$(kde_moduledir)')
-AC_SUBST(kde_styledir)
-AC_SUBST(kde_widgetdir)
-if test "$kde_qtver" = 1; then
-  kde_minidir="$kde_icondir/mini"
-else
-# for KDE 1 - this breaks KDE2 apps using minidir, but
-# that's the plan ;-/
-  kde_minidir="/dev/null"
-fi
-dnl AC_SUBST(kde_minidir)
-dnl AC_SUBST(kde_cgidir)
-dnl AC_SUBST(kde_toolbardir)
-])
-
-AC_DEFUN(KDE_MISC_TESTS,
-[
-   AC_LANG_C
-   dnl Checks for libraries.
-   AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD 
-   AC_SUBST(LIBUTIL)
-   AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD
-   AC_SUBST(LIBCOMPAT)
-   kde_have_crypt=
-   AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes],
-      AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [
-        AC_MSG_WARN([you have no crypt in either libcrypt or libc.
-You should install libcrypt from another source or configure with PAM
-support])
-	kde_have_crypt=no
-      ]))
-   AC_SUBST(LIBCRYPT)
-   if test $kde_have_crypt = yes; then
-      AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function])
-   fi
-   AC_CHECK_SOCKLEN_T
-   AC_LANG_C
-   AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"])
-   if test $ac_cv_lib_dnet_dnet_ntoa = no; then
-      AC_CHECK_LIB(dnet_stub, dnet_ntoa,
-        [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"])
-   fi
-   AC_CHECK_FUNC(inet_ntoa)
-   if test $ac_cv_func_inet_ntoa = no; then
-     AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
-   fi
-   AC_CHECK_FUNC(connect)
-   if test $ac_cv_func_connect = no; then
-      AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
-        $X_EXTRA_LIBS)
-   fi
-
-   AC_CHECK_FUNC(remove)
-   if test $ac_cv_func_remove = no; then
-      AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix")
-   fi
-
-   # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
-   AC_CHECK_FUNC(shmat, ,
-     AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"))
-   
-   # darwin needs this to initialize the environment
-   AC_CHECK_HEADERS(crt_externs.h)
-   AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])])
- 
-   # more headers that need to be explicitly included on darwin
-   AC_CHECK_HEADERS(sys/types.h stdint.h)
-
-   # darwin requires a poll emulation library
-   AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll")
-
-   # CoreAudio framework
-   AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [
-     AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API])
-     FRAMEWORK_COREAUDIO="-framework CoreAudio"
-   ])
-
-   AC_CHECK_RES_INIT
-   AC_SUBST(LIB_POLL)
-   AC_SUBST(FRAMEWORK_COREAUDIO)
-   LIBSOCKET="$X_EXTRA_LIBS"
-   AC_SUBST(LIBSOCKET)
-   AC_SUBST(X_EXTRA_LIBS)
-   AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4
-   AC_SUBST(LIBUCB)
-
-   case $host in  dnl this *is* LynxOS specific
-   *-*-lynxos* )
-        AC_MSG_CHECKING([LynxOS header file wrappers])
-        [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"]
-        AC_MSG_RESULT(disabled)
-        AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS
-         ;;
-    esac
-
-   KDE_CHECK_TYPES
-   KDE_CHECK_LIBDL
-   KDE_CHECK_STRLCPY
-   
-AH_VERBATIM(_AIX_STRINGS_H_BZERO,
-[
-/*
- * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
- * that defines bzero.
- */
-
-#if defined(_AIX)
-#include <strings.h>
-#endif
-])
-
-AC_CHECK_FUNCS([vsnprintf snprintf])
-
-AH_VERBATIM(_TRU64,[
-/*
- * On HP-UX, the declaration of vsnprintf() is needed every time !
- */
-
-#if !defined(HAVE_VSNPRINTF) || defined(hpux)
-#if __STDC__
-#include <stdarg.h>
-#include <stdlib.h>
-#else
-#include <varargs.h>
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
-#ifdef __cplusplus
-extern "C"
-#endif
-int snprintf(char *str, size_t n, char const *fmt, ...);
-#endif
-])
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Find the header files and libraries for X-Windows. Extended the
-dnl macro AC_PATH_X
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(K_PATH_X,
-[
-AC_REQUIRE([KDE_MISC_TESTS])dnl
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_ARG_ENABLE(
-  embedded,
-  [  --enable-embedded       link to Qt-embedded, don't use X],
-  kde_use_qt_emb=$enableval,
-  kde_use_qt_emb=no
-)
-
-AC_ARG_ENABLE(
-  qtopia,
-  [  --enable-qtopia         link to Qt-embedded, link to the Qtopia Environment],
-  kde_use_qt_emb_palm=$enableval,
-  kde_use_qt_emb_palm=no
-)
-
-if test "$kde_use_qt_emb" = "no"; then
-
-AC_MSG_CHECKING(for X)
-AC_LANG_SAVE
-AC_LANG_C
-AC_CACHE_VAL(kde_cv_have_x,
-[# One or both of the vars are not set, and there is no cached value.
-if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
-   kde_x_includes=NO
-else
-   kde_x_includes=$x_includes
-fi
-if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
-   kde_x_libraries=NO
-else
-   kde_x_libraries=$x_libraries
-fi
-
-# below we use the standard autoconf calls
-ac_x_libraries=$kde_x_libraries
-ac_x_includes=$kde_x_includes
-
-KDE_PATH_X_DIRECT
-dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries.
-dnl Unfortunately, if compiling with the N32 ABI, this is not the correct
-dnl location. The correct location is /usr/lib32 or an undefined value
-dnl (the linker is smart enough to pick the correct default library).
-dnl Things work just fine if you use just AC_PATH_X_DIRECT.
-dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to
-dnl /usr/openwin/include, which doesn't work. /usr/include does work, so
-dnl x_includes should be left alone.
-case "$host" in
-mips-sgi-irix6*)
-  ;;
-*-*-solaris*)
-  ;;
-*)
-  _AC_PATH_X_XMKMF
-  if test -z "$ac_x_includes"; then
-    ac_x_includes="."
-  fi
-  if test -z "$ac_x_libraries"; then
-    ac_x_libraries="/usr/lib${tdelibsuff}"
-  fi
-esac
-#from now on we use our own again
-
-# when the user already gave --x-includes, we ignore
-# what the standard autoconf macros told us.
-if test "$kde_x_includes" = NO; then
-  kde_x_includes=$ac_x_includes
-fi
-
-# for --x-libraries too
-if test "$kde_x_libraries" = NO; then
-  kde_x_libraries=$ac_x_libraries
-fi
-
-if test "$kde_x_includes" = NO; then
-  AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!])
-fi
-
-if test "$kde_x_libraries" = NO; then
-  AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!])
-fi
-
-# Record where we found X for the cache.
-kde_cv_have_x="have_x=yes \
-         kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
-])dnl
-
-eval "$kde_cv_have_x"
-
-if test "$have_x" != yes; then
-  AC_MSG_RESULT($have_x)
-  no_x=yes
-else
-  AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes])
-fi
-
-if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
-  X_INCLUDES=""
-  x_includes="."; dnl better than nothing :-
- else
-  x_includes=$kde_x_includes
-  X_INCLUDES="-I$x_includes"
-fi
-
-if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
-  X_LDFLAGS=""
-  x_libraries="/usr/lib"; dnl better than nothing :-
- else
-  x_libraries=$kde_x_libraries
-  X_LDFLAGS="-L$x_libraries"
-fi
-all_includes="$X_INCLUDES"
-all_libraries="$X_LDFLAGS"
-
-AC_SUBST(X_INCLUDES)
-AC_SUBST(X_LDFLAGS)
-AC_SUBST(x_libraries)
-AC_SUBST(x_includes)
-
-# Check for libraries that X11R6 Xt/Xaw programs need.
-ac_save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
-# check for ICE first), but we must link in the order -lSM -lICE or
-# we get undefined symbols.  So assume we have SM if we have ICE.
-# These have to be linked with before -lX11, unlike the other
-# libraries we check for below, so use a different variable.
-#  --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
-AC_CHECK_LIB(ICE, IceConnectionNumber,
-  [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS)
-AC_SUBST(LIBSM)
-LDFLAGS="$ac_save_LDFLAGS"
-
-AC_SUBST(X_PRE_LIBS)
-
-LIB_X11='-lX11 $(LIBSOCKET)'
-AC_SUBST(LIB_X11)
-
-AC_MSG_CHECKING(for libXext)
-AC_CACHE_VAL(kde_cv_have_libXext,
-[
-kde_ldflags_safe="$LDFLAGS"
-kde_libs_safe="$LIBS"
-
-LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
-LIBS="-lXext -lX11 $LIBSOCKET"
-
-AC_TRY_LINK([
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-],
-[
-printf("hello Xext\n");
-],
-kde_cv_have_libXext=yes,
-kde_cv_have_libXext=no
-   )
-
-LDFLAGS=$kde_ldflags_safe
-LIBS=$kde_libs_safe
- ])
-
-AC_MSG_RESULT($kde_cv_have_libXext)
-
-if test "$kde_cv_have_libXext" = "no"; then
-  AC_MSG_ERROR([We need a working libXext to proceed. Since configure
-can't find it itself, we stop here assuming that make wouldn't find
-them either.])
-fi
-
-LIB_XEXT="-lXext"
-QTE_NORTTI=""
-
-else
-  dnl We're using QT Embedded
-  CPPFLAGS=-DQWS
-  CXXFLAGS="$CXXFLAGS -fno-rtti"
-  QTE_NORTTI="-fno-rtti -DQWS"
-  X_PRE_LIBS=""
-  LIB_X11=""
-  LIB_XEXT=""
-  LIBSM=""
-  X_INCLUDES=""
-  X_LDFLAGS=""
-  x_includes=""
-  x_libraries=""
-  AC_SUBST(X_PRE_LIBS)
-  AC_SUBST(LIB_X11)
-  AC_SUBST(LIBSM)
-  AC_SUBST(X_INCLUDES)
-  AC_SUBST(X_LDFLAGS)
-  AC_SUBST(x_includes)
-  AC_SUBST(x_libraries)
-fi
-AC_SUBST(QTE_NORTTI)
-AC_SUBST(LIB_XEXT)
-
-
-AC_LANG_RESTORE
-
-])
-
-AC_DEFUN(KDE_PRINT_QT_PROGRAM,
-[
-AC_REQUIRE([KDE_USE_QT])
-cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <ntqglobal.h>
-#include <ntqapplication.h>
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqevent.h>
-#include <ntqstring.h>
-#include <ntqstyle.h>
-EOF
-
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-#if TQT_VERSION < 210
-#error 1
-#endif
-EOF
-fi
-fi
-
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqcursor.h>
-#include <ntqstylefactory.h>
-#include <private/qucomextra_p.h>
-EOF
-fi
-
-echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
-cat >> conftest.$ac_ext <<EOF
-#error 1
-#endif
-
-int main() {
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-    QStringList *t = new QStringList();
-    Q_UNUSED(t);
-EOF
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-    QString s;
-    s.setLatin1("Elvis is alive", 14);
-EOF
-fi
-fi
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-    (void)QStyleFactory::create(QString::null);
-    QCursor c(Qt::WhatsThisCursor);
-EOF
-fi
-cat >> conftest.$ac_ext <<EOF
-    return 0;
-}
-EOF
-])
-
-AC_DEFUN(KDE_USE_QT,
-[
-if test -z "$1"; then
-  # Current default Qt version: 3.1
-  kde_qtver=3
-  kde_qtsubver=1
-else
-  kde_qtsubver=`echo "$1" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'`
-  # following is the check if subversion isnt found in passed argument
-  if test "$kde_qtsubver" = "$1"; then
-    kde_qtsubver=1
-  fi
-  kde_qtver=`echo "$1" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'`
-  if test "$kde_qtver" = "1"; then
-    kde_qtsubver=42
-  fi
-fi
-
-if test -z "$2"; then
-  if test "$kde_qtver" = "2"; then
-    if test $kde_qtsubver -gt 0; then
-      kde_qt_minversion=">= Qt 2.2.2"
-    else
-      kde_qt_minversion=">= Qt 2.0.2"
-    fi
-  fi
-  if test "$kde_qtver" = "3"; then
-    if test $kde_qtsubver -gt 0; then
-      kde_qt_minversion=">= Qt 3.1 (20021021)"
-    else
-      kde_qt_minversion=">= Qt 3.0"
-    fi
-  fi
-  if test "$kde_qtver" = "1"; then
-    kde_qt_minversion=">= 1.42 and < 2.0"
-  fi
-else
-   kde_qt_minversion=$2
-fi
-
-if test -z "$3"; then
-   if test $kde_qtver = 3; then
-     if test $kde_qtsubver -gt 0; then
-       kde_qt_verstring="TQT_VERSION >= 0x030100"
-     else
-       kde_qt_verstring="TQT_VERSION >= 300"
-     fi
-   fi
-   if test $kde_qtver = 2; then
-     if test $kde_qtsubver -gt 0; then
-       kde_qt_verstring="TQT_VERSION >= 222"
-     else
-       kde_qt_verstring="TQT_VERSION >= 200"
-     fi
-   fi
-   if test $kde_qtver = 1; then
-    kde_qt_verstring="TQT_VERSION >= 142 && TQT_VERSION < 200"
-   fi
-else
-   kde_qt_verstring=$3
-fi
-
-if test $kde_qtver = 3; then
-  kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3"
-fi
-if test $kde_qtver = 2; then
-   kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
-fi
-if test $kde_qtver = 1; then
-   kde_qt_dirs="$QTDIR /usr/lib/qt"
-fi
-])
-
-AC_DEFUN(KDE_CHECK_QT_DIRECT,
-[
-AC_REQUIRE([KDE_USE_QT])
-AC_MSG_CHECKING([if Qt compiles without flags])
-AC_CACHE_VAL(kde_cv_qt_direct,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
-ac_LIBRARY_PATH="$LIBRARY_PATH"
-ac_cxxflags_safe="$CXXFLAGS"
-ac_ldflags_safe="$LDFLAGS"
-ac_libs_safe="$LIBS"
-
-CXXFLAGS="$CXXFLAGS -I$qt_includes"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
-else
-LIBS="$LIBQT $LIBSOCKET"
-fi
-LD_LIBRARY_PATH=
-export LD_LIBRARY_PATH
-LIBRARY_PATH=
-export LIBRARY_PATH
-
-KDE_PRINT_QT_PROGRAM
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  kde_cv_qt_direct="yes"
-else
-  kde_cv_qt_direct="no"
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.$ac_ext >&AC_FD_CC
-fi
-
-rm -f conftest*
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-
-LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
-export LD_LIBRARY_PATH
-LIBRARY_PATH="$ac_LIBRARY_PATH"
-export LIBRARY_PATH
-AC_LANG_RESTORE
-])
-
-if test "$kde_cv_qt_direct" = "yes"; then
-  AC_MSG_RESULT(yes)
-  $1
-else
-  AC_MSG_RESULT(no)
-  $2
-fi
-])
-
-dnl ------------------------------------------------------------------------
-dnl Try to find the Qt headers and libraries.
-dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed)
-dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_PATH_QT_1_3,
-[
-AC_REQUIRE([K_PATH_X])
-AC_REQUIRE([KDE_USE_QT])
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-dnl ------------------------------------------------------------------------
-dnl Add configure flag to enable linking to MT version of Qt library.
-dnl ------------------------------------------------------------------------
-
-AC_ARG_ENABLE(
-  mt,
-  [  --disable-mt            link to non-threaded Qt (deprecated)],
-  kde_use_qt_mt=$enableval,
-  [
-    if test $kde_qtver = 3; then
-      kde_use_qt_mt=yes
-    else
-      kde_use_qt_mt=no
-    fi
-  ]
-)
-
-USING_QT_MT=""
-
-dnl ------------------------------------------------------------------------
-dnl If we not get --disable-tqt-mt then adjust some vars for the host.
-dnl ------------------------------------------------------------------------
-
-KDE_MT_LDFLAGS=
-KDE_MT_LIBS=
-if test "x$kde_use_qt_mt" = "xyes"; then
-  KDE_CHECK_THREADING
-  if test "x$kde_use_threading" = "xyes"; then
-    CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS"
-    KDE_MT_LDFLAGS="$USE_THREADS"
-    KDE_MT_LIBS="$LIBPTHREAD"
-  else
-    kde_use_qt_mt=no
-  fi
-fi
-AC_SUBST(KDE_MT_LDFLAGS)
-AC_SUBST(KDE_MT_LIBS)
-
-kde_qt_was_given=yes
-
-dnl ------------------------------------------------------------------------
-dnl If we haven't been told how to link to Qt, we work it out for ourselves.
-dnl ------------------------------------------------------------------------
-if test -z "$LIBQT_GLOB"; then
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    LIBQT_GLOB="libqte.*"
-  else
-    LIBQT_GLOB="libqt.*"
-  fi
-fi
-
-if test -z "$LIBQT"; then
-dnl ------------------------------------------------------------
-dnl If we got --enable-embedded then adjust the Qt library name.
-dnl ------------------------------------------------------------
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    qtlib="qte"
-  else
-    qtlib="qt"
-  fi
-
-  kde_int_qt="-l$qtlib"
-else
-  kde_int_qt="$LIBQT"
-  kde_lib_qt_set=yes
-fi
-
-if test -z "$LIBQPE"; then
-dnl ------------------------------------------------------------
-dnl If we got --enable-palmtop then add -lqpe to the link line
-dnl ------------------------------------------------------------
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    if test "x$kde_use_qt_emb_palm" = "xyes"; then
-      LIB_QPE="-lqpe"
-    else
-      LIB_QPE=""
-    fi
-  else
-    LIB_QPE=""
-  fi
-fi
-
-dnl ------------------------------------------------------------------------
-dnl If we got --enable-tqt-mt then adjust the Qt library name for the host.
-dnl ------------------------------------------------------------------------
-
-if test "x$kde_use_qt_mt" = "xyes"; then
-  if test -z "$LIBQT"; then
-    LIBQT="-l$qtlib-mt"
-    kde_int_qt="-l$qtlib-mt"
-  else
-    LIBQT="$qtlib-mt"
-    kde_int_qt="$qtlib-mt"
-  fi
-  LIBQT_GLOB="lib$qtlib-mt.*"
-  USING_QT_MT="using -mt"
-else
-  LIBQT="-l$qtlib"
-fi
-
-if test $kde_qtver != 1; then
-
-  AC_REQUIRE([AC_FIND_PNG])
-  AC_REQUIRE([AC_FIND_JPEG])
-  LIBQT="$LIBQT $LIBPNG $LIBJPEG"
-fi
-
-if test $kde_qtver = 3; then
-  AC_REQUIRE([KDE_CHECK_LIBDL])
-  LIBQT="$LIBQT $LIBDL"
-fi
-
-AC_MSG_CHECKING([for Qt])
-
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
-fi
-ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
-qt_libraries=""
-qt_includes=""
-AC_ARG_WITH(qt-dir,
-    [  --with-qt-dir=DIR       where the root of Qt is installed ],
-    [  ac_qt_includes="$withval"/include
-       ac_qt_libraries="$withval"/lib${tdelibsuff}
-       ac_qt_bindir="$withval"/bin
-    ])
-
-AC_ARG_WITH(qt-includes,
-    [  --with-qt-includes=DIR  where the Qt includes are. ],
-    [
-       ac_qt_includes="$withval"
-    ])
-
-kde_qt_libs_given=no
-
-AC_ARG_WITH(qt-libraries,
-    [  --with-qt-libraries=DIR where the Qt library is installed.],
-    [  ac_qt_libraries="$withval"
-       kde_qt_libs_given=yes
-    ])
-
-AC_CACHE_VAL(ac_cv_have_qt,
-[#try to guess Qt locations
-
-qt_incdirs=""
-for dir in $kde_qt_dirs; do
-   qt_incdirs="$qt_incdirs $dir/include $dir"
-done
-qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes"
-if test ! "$ac_qt_includes" = "NO"; then
-   qt_incdirs="$ac_qt_includes $qt_incdirs"
-fi
-
-if test "$kde_qtver" != "1"; then
-  kde_qt_header=ntqstyle.h
-else
-  kde_qt_header=ntqglobal.h
-fi
-
-AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir)
-ac_qt_includes="$qt_incdir"
-
-qt_libdirs=""
-for dir in $kde_qt_dirs; do
-   qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir"
-done
-qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
-if test ! "$ac_qt_libraries" = "NO"; then
-  qt_libdir=$ac_qt_libraries
-else
-  qt_libdirs="$ac_qt_libraries $qt_libdirs"
-  # if the Qt was given, the chance is too big that libqt.* doesn't exist
-  qt_libdir=NONE
-  for dir in $qt_libdirs; do
-    try="ls -1 $dir/${LIBQT_GLOB}"
-    if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
-  done
-fi
-
-ac_qt_libraries="$qt_libdir"
-
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-
-ac_cxxflags_safe="$CXXFLAGS"
-ac_ldflags_safe="$LDFLAGS"
-ac_libs_safe="$LIBS"
-
-CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
-LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
-LIBS="$LIBS $LIBQT $KDE_MT_LIBS"
-
-KDE_PRINT_QT_PROGRAM
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  rm -f conftest*
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.$ac_ext >&AC_FD_CC
-  ac_qt_libraries="NO"
-fi
-rm -f conftest*
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-
-AC_LANG_RESTORE
-if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
-  ac_cv_have_qt="have_qt=no"
-  ac_qt_notfound=""
-  missing_qt_mt=""
-  if test "$ac_qt_includes" = NO; then
-    if test "$ac_qt_libraries" = NO; then
-      ac_qt_notfound="(headers and libraries)";
-    else
-      ac_qt_notfound="(headers)";
-    fi
-  else
-    if test "x$kde_use_qt_mt" = "xyes"; then
-       missing_qt_mt="
-Make sure that you have compiled Qt with thread support!"
-       ac_qt_notfound="(library $qtlib-mt)";
-    else
-       ac_qt_notfound="(library $qtlib)";
-    fi
-  fi
-
-  AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
-For more details about this problem, look at the end of config.log.$missing_qt_mt])
-else
-  have_qt="yes"
-fi
-])
-
-eval "$ac_cv_have_qt"
-
-if test "$have_qt" != yes; then
-  AC_MSG_RESULT([$have_qt]);
-else
-  ac_cv_have_qt="have_qt=yes \
-    ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
-  AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT])
-
-  qt_libraries="$ac_qt_libraries"
-  qt_includes="$ac_qt_includes"
-fi
-
-if test ! "$kde_qt_libs_given" = "yes"; then
-KDE_CHECK_QT_DIRECT(qt_libraries= ,[])
-fi
-
-AC_SUBST(qt_libraries)
-AC_SUBST(qt_includes)
-
-if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
- QT_INCLUDES=""
-else
- QT_INCLUDES="-I$qt_includes"
- all_includes="$QT_INCLUDES $all_includes"
-fi
-
-if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
- QT_LDFLAGS=""
-else
- QT_LDFLAGS="-L$qt_libraries"
- all_libraries="$all_libraries $QT_LDFLAGS"
-fi
-test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS"
-
-AC_SUBST(QT_INCLUDES)
-AC_SUBST(QT_LDFLAGS)
-AC_PATH_QT_MOC_UIC
-
-KDE_CHECK_QT_JPEG
-
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)'
-else
-LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)'
-fi
-test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS"
-
-AC_SUBST(LIB_QT)
-AC_SUBST(LIB_QPE)
-
-AC_SUBST(kde_qtver)
-])
-
-AC_DEFUN(AC_PATH_QT,
-[
-AC_PATH_QT_1_3
-])
-
-AC_DEFUN(KDE_CHECK_UIC_PLUGINS,
-[
-AC_REQUIRE([AC_PATH_QT_MOC_UIC])
-
-if test x$ac_uic_supports_libpath = xyes; then
-
-AC_MSG_CHECKING([if UIC has KDE plugins available])
-AC_CACHE_VAL(kde_cv_uic_plugins,
-[
-cat > actest.ui << EOF
-<!DOCTYPE UI><UI version="3.0" stdsetdef="1">
-<class>NewConnectionDialog</class>
-<widget class="QDialog">
-   <widget class="KLineEdit">
-        <property name="name">
-           <cstring>testInput</cstring>
-        </property>
-   </widget>
-</widget>
-</UI>
-EOF
-       
-
-
-kde_cv_uic_plugins=no
-kde_line="$UIC_PATH -L $kde_widgetdir"
-if test x$ac_uic_supports_nounload = xyes; then
-   kde_line="$kde_line -nounload"
-fi
-kde_line="$kde_line -impl actest.h actest.ui > actest.cpp"
-if AC_TRY_EVAL(kde_line); then
-	if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then
-		kde_cv_uic_plugins=yes
-	fi
-fi
-rm -f actest.ui actest.cpp
-])
-
-AC_MSG_RESULT([$kde_cv_uic_plugins])
-if test "$kde_cv_uic_plugins" != yes; then
-	AC_MSG_ERROR([you need to install tdelibs first.])
-fi
-fi
-])
-
-AC_DEFUN(KDE_CHECK_FINAL,
-[
-  AC_ARG_ENABLE(final, [  --enable-final          build size optimized apps (experimental - needs lots of memory)],
-	kde_use_final=$enableval, kde_use_final=no)
-
-  if test "x$kde_use_final" = "xyes"; then
-      KDE_USE_FINAL_TRUE=""
-      KDE_USE_FINAL_FALSE="#"
-   else
-      KDE_USE_FINAL_TRUE="#"
-      KDE_USE_FINAL_FALSE=""
-  fi
-  AC_SUBST(KDE_USE_FINAL_TRUE)
-  AC_SUBST(KDE_USE_FINAL_FALSE)
-])
-
-AC_DEFUN(KDE_CHECK_CLOSURE,
-[
-  AC_ARG_ENABLE(closure, [  --disable-closure       don't delay template instantiation],
-  	kde_use_closure=$enableval, kde_use_closure=yes)
-
-  KDE_NO_UNDEFINED=""
-  if test "x$kde_use_closure" = "xyes"; then
-       KDE_USE_CLOSURE_TRUE=""
-       KDE_USE_CLOSURE_FALSE="#"
-#       CXXFLAGS="$CXXFLAGS $REPO"
-  else
-       KDE_USE_CLOSURE_TRUE="#"
-       KDE_USE_CLOSURE_FALSE=""
-       KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined],
-            [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined],
-		[KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"],
-		[KDE_NO_UNDEFINED=""])],
-	    [KDE_NO_UNDEFINED=""])
-  fi
-  AC_SUBST(KDE_USE_CLOSURE_TRUE)
-  AC_SUBST(KDE_USE_CLOSURE_FALSE)
-  AC_SUBST(KDE_NO_UNDEFINED)
-])
-
-AC_DEFUN(KDE_CHECK_NMCHECK,
-[
-  AC_ARG_ENABLE(nmcheck, [  --enable-nmcheck        enable automatic namespace cleanness check],
-	kde_use_nmcheck=$enableval, kde_use_nmcheck=no)
-
-  if test "$kde_use_nmcheck" = "yes"; then
-      KDE_USE_NMCHECK_TRUE=""
-      KDE_USE_NMCHECK_FALSE="#"
-   else
-      KDE_USE_NMCHECK_TRUE="#"
-      KDE_USE_NMCHECK_FALSE=""
-  fi
-  AC_SUBST(KDE_USE_NMCHECK_TRUE)
-  AC_SUBST(KDE_USE_NMCHECK_FALSE)
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Now, the same with KDE
-dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed)
-dnl and $(kde_includes) will be the kdehdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_BASE_PATH_KDE,
-[
-AC_PREREQ([2.13])
-AC_REQUIRE([AC_PATH_QT])dnl
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_CHECK_RPATH
-AC_MSG_CHECKING([for KDE])
-
-if test "${prefix}" != NONE; then
-  kde_includes=${prefix}/include
-  ac_kde_includes=$prefix/include
-
-  if test "${exec_prefix}" != NONE; then
-     kde_libraries=${libdir}
-     ac_kde_libraries=$libdir
-     if test "$ac_kde_libraries" = '${exec_prefix}/lib'${tdelibsuff}; then
-	ac_kde_libraries=$exec_prefix/lib${tdelibsuff}
-     fi
-  else
-     kde_libraries=${prefix}/lib${tdelibsuff}
-     ac_kde_libraries=$prefix/lib${tdelibsuff}
-  fi
-else
-  ac_kde_includes=
-  ac_kde_libraries=
-  kde_libraries=""
-  kde_includes=""
-fi
-
-AC_CACHE_VAL(ac_cv_have_kde,
-[#try to guess kde locations
-
-if test "$kde_qtver" = 1; then
-  kde_check_header="ksock.h"
-  kde_check_lib="libtdecore.la"
-else
-  kde_check_header="ksharedptr.h"
-  kde_check_lib="libtdeio.la"
-fi
-
-if test -z "$1"; then
-
-kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes"
-test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs"
-kde_incdirs="$ac_kde_includes $kde_incdirs"
-AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir)
-ac_kde_includes="$kde_incdir"
-
-if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
-  AC_MSG_ERROR([
-in the prefix, you've chosen, are no KDE headers installed. This will fail.
-So, check this please and use another prefix!])
-fi
-
-kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}"
-test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs"
-kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs"
-AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir)
-ac_kde_libraries="$kde_libdir"
-
-kde_widgetdir=NO
-dnl this might be somewhere else
-AC_FIND_FILE("kde3/plugins/designer/tdewidgets.la", $kde_libdirs, kde_widgetdir)
-
-if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
-AC_MSG_ERROR([
-in the prefix, you've chosen, are no KDE libraries installed. This will fail.
-So, check this please and use another prefix!])
-fi
-
-if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then
-AC_MSG_ERROR([
-I can't find the designer plugins. These are required and should have been installed
-by tdelibs])
-fi
-
-if test -n "$kde_widgetdir"; then
-    kde_widgetdir="$kde_widgetdir/kde3/plugins/designer"
-fi
-
-
-if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then
-  ac_cv_have_kde="have_kde=no"
-else
-  ac_cv_have_kde="have_kde=yes \
-    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
-fi
-
-else dnl test -z $1
-
-  ac_cv_have_kde="have_kde=no"
-
-fi
-])dnl
-
-eval "$ac_cv_have_kde"
-
-if test "$have_kde" != "yes"; then
- if test "${prefix}" = NONE; then
-  ac_kde_prefix="$ac_default_prefix"
- else
-  ac_kde_prefix="$prefix"
- fi
- if test "$exec_prefix" = NONE; then
-  ac_kde_exec_prefix="$ac_kde_prefix"
-  AC_MSG_RESULT([will be installed in $ac_kde_prefix])
- else
-  ac_kde_exec_prefix="$exec_prefix"
-  AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix])
- fi
-
- kde_libraries="${libdir}"
- kde_includes=${ac_kde_prefix}/include
-
-else
-  ac_cv_have_kde="have_kde=yes \
-    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
-  AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes])
-
-  kde_libraries="$ac_kde_libraries"
-  kde_includes="$ac_kde_includes"
-fi
-AC_SUBST(kde_libraries)
-AC_SUBST(kde_includes)
-
-if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes"  || test "$kde_includes" = "/usr/include"; then
- KDE_INCLUDES=""
-else
- KDE_INCLUDES="-I$kde_includes"
- all_includes="$KDE_INCLUDES $all_includes"
-fi
-
-KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION"
- 
-KDE_LDFLAGS="-L$kde_libraries"
-if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then 
- all_libraries="$all_libraries $KDE_LDFLAGS"
-fi
-
-AC_SUBST(KDE_LDFLAGS)
-AC_SUBST(KDE_INCLUDES)
-
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
-all_libraries="$all_libraries $USER_LDFLAGS"
-all_includes="$all_includes $USER_INCLUDES"
-AC_SUBST(all_includes)
-AC_SUBST(all_libraries)
-
-if test -z "$1"; then
-KDE_CHECK_UIC_PLUGINS
-fi
-
-ac_kde_libraries="$kde_libdir"
-
-AC_SUBST(AUTODIRS)
-
-
-])
-
-AC_DEFUN(KDE_CHECK_EXTRA_LIBS,
-[
-AC_MSG_CHECKING(for extra includes)
-AC_ARG_WITH(extra-includes, [  --with-extra-includes=DIR
-                          adds non standard include paths],
-  kde_use_extra_includes="$withval",
-  kde_use_extra_includes=NONE
-)
-kde_extra_includes=
-if test -n "$kde_use_extra_includes" && \
-   test "$kde_use_extra_includes" != "NONE"; then
-
-   ac_save_ifs=$IFS
-   IFS=':'
-   for dir in $kde_use_extra_includes; do
-     kde_extra_includes="$kde_extra_includes $dir"
-     USER_INCLUDES="$USER_INCLUDES -I$dir"
-   done
-   IFS=$ac_save_ifs
-   kde_use_extra_includes="added"
-else
-   kde_use_extra_includes="no"
-fi
-AC_SUBST(USER_INCLUDES)
-
-AC_MSG_RESULT($kde_use_extra_includes)
-
-kde_extra_libs=
-AC_MSG_CHECKING(for extra libs)
-AC_ARG_WITH(extra-libs, [  --with-extra-libs=DIR   adds non standard library paths],
-  kde_use_extra_libs=$withval,
-  kde_use_extra_libs=NONE
-)
-if test -n "$kde_use_extra_libs" && \
-   test "$kde_use_extra_libs" != "NONE"; then
-
-   ac_save_ifs=$IFS
-   IFS=':'
-   for dir in $kde_use_extra_libs; do
-     kde_extra_libs="$kde_extra_libs $dir"
-     KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
-     USER_LDFLAGS="$USER_LDFLAGS -L$dir"
-   done
-   IFS=$ac_save_ifs
-   kde_use_extra_libs="added"
-else
-   kde_use_extra_libs="no"
-fi
-
-AC_SUBST(USER_LDFLAGS)
-
-AC_MSG_RESULT($kde_use_extra_libs)
-
-])
-
-AC_DEFUN(KDE_1_CHECK_PATH_HEADERS,
-[
-    AC_MSG_CHECKING([for KDE headers installed])
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-cat > conftest.$ac_ext <<EOF
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-#include "confdefs.h"
-#include <kapp.h>
-
-int main() {
-    printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data());
-    printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data());
-    printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data());
-    printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data());
-    printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data());
-    printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data());
-    printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data());
-    printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data());
-    printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data());
-    printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data());
-    printf("kde_wallpaperdir=\\"%s\\"\n",
-	TDEApplication::kde_wallpaperdir().data());
-    printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data());
-    printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data());
-    printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_moduledir=\\"/tmp/dummy\\"\n");
-    printf("kde_styledir=\\"/tmp/dummy\\"\n");
-    printf("kde_widgetdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_appsdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_directorydir=\\"/tmp/dummy\\"\n");
-    return 0;
-    }
-EOF
-
- ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
- if AC_TRY_EVAL(ac_compile); then
-   AC_MSG_RESULT(yes)
- else
-   AC_MSG_ERROR([your system is not able to compile a small KDE application!
-Check, if you installed the KDE header files correctly.
-For more details about this problem, look at the end of config.log.])
-  fi
-
-  AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_KDEQTADDON,
-[
-AC_MSG_CHECKING(for kde-qt-addon)
-AC_CACHE_VAL(kde_cv_have_kdeqtaddon,
-[
- kde_ldflags_safe="$LDFLAGS"
- kde_libs_safe="$LIBS"
- kde_cxxflags_safe="$CXXFLAGS"
-
- LIBS="-lkde-qt-addon $LIBQT $LIBS"
- CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/tde $all_includes"
- LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS"
-
- AC_TRY_LINK([
-   #include <ntqdom.h>
- ],
- [
-   QDomDocument doc;
- ],
-  kde_cv_have_kdeqtaddon=yes,
-  kde_cv_have_kdeqtaddon=no
- )
-
- LDFLAGS=$kde_ldflags_safe
- LIBS=$kde_libs_safe
- CXXFLAGS=$kde_cxxflags_safe
-])
-
-AC_MSG_RESULT($kde_cv_have_kdeqtaddon)
-
-if test "$kde_cv_have_kdeqtaddon" = "no"; then
-  AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first.
-It is a separate package (and CVS module) named kde-qt-addon.])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_KIMGIO,
-[
-   AC_REQUIRE([AC_BASE_PATH_KDE])
-   AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-   AC_REQUIRE([AC_FIND_TIFF])
-   AC_REQUIRE([AC_FIND_JPEG])
-   AC_REQUIRE([AC_FIND_PNG])
-   AC_REQUIRE([AC_FIND_JASPER])
-   AC_REQUIRE([KDE_CREATE_LIBS_ALIASES])
-
-   if test "$1" = "existance"; then
-     AC_LANG_SAVE
-     AC_LANG_CPLUSPLUS
-     kde_save_LIBS="$LIBS"
-     LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm"
-     AC_CHECK_LIB(kimgio, kimgioRegister, [
-      LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no)
-     LIBS="$kde_save_LIBS"
-     AC_LANG_RESTORE
-   else
-     LIBKIMGIO_EXISTS=yes
-   fi
-
-   if test "$LIBKIMGIO_EXISTS" = "yes"; then
-     LIB_KIMGIO='-lkimgio'
-   else
-     LIB_KIMGIO=''
-   fi
-   AC_SUBST(LIB_KIMGIO)
-])
-
-AC_DEFUN(KDE_CREATE_LIBS_ALIASES,
-[
-   AC_REQUIRE([KDE_MISC_TESTS])
-   AC_REQUIRE([KDE_CHECK_LIBDL])
-   AC_REQUIRE([K_PATH_X])
-
-if test $kde_qtver = 3; then
-   AC_SUBST(LIB_TDECORE, "-ltdecore")
-   AC_SUBST(LIB_TDEUI, "-ltdeui")
-   AC_SUBST(LIB_TDEIO, "-ltdeio")
-   AC_SUBST(LIB_SMB, "-lsmb")
-   AC_SUBST(LIB_KAB, "-lkab")
-   AC_SUBST(LIB_KABC, "-ltdeabc")
-   AC_SUBST(LIB_TDEHTML, "-ltdehtml")
-   AC_SUBST(LIB_TDESPELL, "-ltdespell")
-   AC_SUBST(LIB_TDEPARTS, "-ltdeparts")
-   AC_SUBST(LIB_TDEPRINT, "-ltdeprint")
-# these are for backward compatibility
-   AC_SUBST(LIB_TDESYCOCA, "-ltdeio")
-   AC_SUBST(LIB_KFILE, "-ltdeio")
-elif test $kde_qtver = 2; then
-   AC_SUBST(LIB_TDECORE, "-ltdecore")
-   AC_SUBST(LIB_TDEUI, "-ltdeui")
-   AC_SUBST(LIB_TDEIO, "-ltdeio")
-   AC_SUBST(LIB_TDESYCOCA, "-ltdesycoca")
-   AC_SUBST(LIB_SMB, "-lsmb")
-   AC_SUBST(LIB_KFILE, "-ltdefile")
-   AC_SUBST(LIB_KAB, "-lkab")
-   AC_SUBST(LIB_TDEHTML, "-ltdehtml")
-   AC_SUBST(LIB_TDESPELL, "-ltdespell")
-   AC_SUBST(LIB_TDEPARTS, "-ltdeparts")
-   AC_SUBST(LIB_TDEPRINT, "-ltdeprint")
-else
-   AC_SUBST(LIB_TDECORE, "-ltdecore -lXext $(LIB_QT)")
-   AC_SUBST(LIB_TDEUI, "-ltdeui $(LIB_TDECORE)")
-   AC_SUBST(LIB_KFM, "-lkfm $(LIB_TDECORE)")
-   AC_SUBST(LIB_KFILE, "-ltdefile $(LIB_KFM) $(LIB_TDEUI)")
-   AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_TDECORE)")
-fi
-])
-
-AC_DEFUN(AC_PATH_KDE,
-[
-  AC_BASE_PATH_KDE
-  AC_ARG_ENABLE(path-check, [  --disable-path-check    don't try to find out, where to install],
-  [
-  if test "$enableval" = "no";
-    then ac_use_path_checking="default"
-    else ac_use_path_checking=""
-  fi
-  ],
-  [
-  if test "$kde_qtver" = 1;
-    then ac_use_path_checking=""
-    else ac_use_path_checking="default"
-  fi
-  ]
-  )
-
-  AC_CREATE_KFSSTND($ac_use_path_checking)
-
-  AC_SUBST_KFSSTND
-  KDE_CREATE_LIBS_ALIASES
-])
-
-dnl KDE_CHECK_FUNC_EXT(<func>, [headers], [sample-use], [C prototype], [autoheader define], [call if found])
-AC_DEFUN(KDE_CHECK_FUNC_EXT,
-[
-AC_MSG_CHECKING(for $1)
-AC_CACHE_VAL(kde_cv_func_$1,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-save_CXXFLAGS="$CXXFLAGS"
-kde_safe_LIBS="$LIBS"
-LIBS="$LIBS $X_EXTRA_LIBS"
-if test "$GXX" = "yes"; then
-CXXFLAGS="$CXXFLAGS -pedantic-errors"
-fi
-AC_TRY_COMPILE([
-$2
-],
-[
-$3
-],
-kde_cv_func_$1=yes,
-kde_cv_func_$1=no)
-CXXFLAGS="$save_CXXFLAGS"
-LIBS="$kde_safe_LIBS"
-AC_LANG_RESTORE
-])
-
-AC_MSG_RESULT($kde_cv_func_$1)
-
-AC_MSG_CHECKING([if $1 needs custom prototype])
-AC_CACHE_VAL(kde_cv_proto_$1,
-[
-if test "x$kde_cv_func_$1" = xyes; then
-  kde_cv_proto_$1=no
-else
-  case "$1" in
-	setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat)
-		kde_cv_proto_$1="yes - in libtdefakes"
-		;;
-	*)
-		kde_cv_proto_$1=unknown
-		;;
-  esac
-fi
-
-if test "x$kde_cv_proto_$1" = xunknown; then
-
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-  kde_safe_libs=$LIBS
-  LIBS="$LIBS $X_EXTRA_LIBS"
-  AC_TRY_LINK([
-$2
-
-extern "C" $4;
-],
-[
-$3
-],
-[ kde_cv_func_$1=yes
-  kde_cv_proto_$1=yes ],
-  [kde_cv_proto_$1="$1 unavailable"]
-)
-LIBS=$kde_safe_libs
-AC_LANG_RESTORE
-fi
-])
-AC_MSG_RESULT($kde_cv_proto_$1)
-
-if test "x$kde_cv_func_$1" = xyes; then
-  AC_DEFINE(HAVE_$5, 1, [Define if you have $1])
-  $6
-fi
-if test "x$kde_cv_proto_$1" = xno; then
-  AC_DEFINE(HAVE_$5_PROTO, 1,
-  [Define if you have the $1 prototype])
-fi
-
-AH_VERBATIM([_HAVE_$5_PROTO],
-[
-#if !defined(HAVE_$5_PROTO)
-#ifdef __cplusplus
-extern "C"
-#endif
-$4;
-#endif
-])
-])
-
-AC_DEFUN(AC_CHECK_SETENV,
-[
-	KDE_CHECK_FUNC_EXT(setenv, [
-#include <stdlib.h>
-], 
-		[setenv("VAR", "VALUE", 1);],
-	        [int setenv (const char *, const char *, int)],
-		[SETENV])
-])
-
-AC_DEFUN(AC_CHECK_UNSETENV,
-[
-	KDE_CHECK_FUNC_EXT(unsetenv, [
-#include <stdlib.h>
-], 
-		[unsetenv("VAR");],
-	        [void unsetenv (const char *)],
-		[UNSETENV])
-])
-
-AC_DEFUN(AC_CHECK_GETDOMAINNAME,
-[
-	KDE_CHECK_FUNC_EXT(getdomainname, [
-#include <stdlib.h>
-#include <unistd.h>
-], 
-		[
-char buffer[200];
-getdomainname(buffer, 200);
-], 	
-	        [int getdomainname (char *, size_t)],
-		[GETDOMAINNAME])
-])
-
-AC_DEFUN(AC_CHECK_GETHOSTNAME,
-[
-	KDE_CHECK_FUNC_EXT(gethostname, [
-#include <stdlib.h>
-#include <unistd.h>
-], 
-		[
-char buffer[200];
-gethostname(buffer, 200);
-], 	
-	        [int gethostname (char *, unsigned int)],
-		[GETHOSTNAME])
-])
-
-AC_DEFUN(AC_CHECK_USLEEP,
-[
-	KDE_CHECK_FUNC_EXT(usleep, [
-#include <unistd.h>
-], 
-		[
-usleep(200);
-], 	
-	        [int usleep (unsigned int)],
-		[USLEEP])
-])
-
-
-AC_DEFUN(AC_CHECK_RANDOM,
-[
-	KDE_CHECK_FUNC_EXT(random, [
-#include <stdlib.h>
-], 
-		[
-random();
-], 	
-	        [long int random(void)],
-		[RANDOM])
-
-	KDE_CHECK_FUNC_EXT(srandom, [
-#include <stdlib.h>
-], 
-		[
-srandom(27);
-], 	
-	        [void srandom(unsigned int)],
-		[SRANDOM])
-
-])
-
-AC_DEFUN(AC_CHECK_INITGROUPS,
-[
-	KDE_CHECK_FUNC_EXT(initgroups, [
-#include <sys/types.h>
-#include <unistd.h>
-#include <grp.h>
-],
-	[
-char buffer[200];
-initgroups(buffer, 27);
-],
-	[int initgroups(const char *, gid_t)],
-	[INITGROUPS])
-])
-
-AC_DEFUN(AC_CHECK_MKSTEMPS,
-[
-	KDE_CHECK_FUNC_EXT(mkstemps, [
-#include <stdlib.h>
-#include <unistd.h>
-],
-	[
-mkstemps("/tmp/aaaXXXXXX", 6);
-],
-	[int mkstemps(char *, int)],
-	[MKSTEMPS])
-])
-
-AC_DEFUN(AC_CHECK_MKDTEMP,
-[
-	KDE_CHECK_FUNC_EXT(mkdtemp, [
-#include <stdlib.h>
-#include <unistd.h>
-],
-	[
-mkdtemp("/tmp/aaaXXXXXX");
-],
-	[char *mkdtemp(char *)],
-	[MKDTEMP])
-])
-
-
-AC_DEFUN(AC_CHECK_RES_INIT,
-[
-  AC_MSG_CHECKING([if res_init needs -lresolv])
-  kde_libs_safe="$LIBS"
-  LIBS="$LIBS $X_EXTRA_LIBS -lresolv"
-  AC_TRY_LINK(
-    [
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-    ],
-    [
-      res_init(); 
-    ],
-    [
-      LIBRESOLV="-lresolv"
-      AC_MSG_RESULT(yes)
-      AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function])
-    ],
-    [ AC_MSG_RESULT(no) ]
-  )
-  LIBS=$kde_libs_safe
-  AC_SUBST(LIBRESOLV)
-
-  AC_MSG_CHECKING([if res_init is available])
-  AC_TRY_COMPILE(
-    [
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-    ],
-    [
-      res_init();
-    ],
-    [
-      AC_MSG_RESULT(yes)
-      AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function])
-    ],
-    [ AC_MSG_RESULT(no) ]
-  )
-])
-
-AC_DEFUN(AC_CHECK_STRLCPY,
-[
-	KDE_CHECK_FUNC_EXT(strlcpy, [
-#include <string.h>
-],
-[ char buf[20];
-  strlcpy(buf, "KDE function test", sizeof(buf));
-],
- 	[unsigned long strlcpy(char*, const char*, unsigned long)],
-	[STRLCPY])
-])
-
-AC_DEFUN(AC_CHECK_STRLCAT,
-[
-	KDE_CHECK_FUNC_EXT(strlcat, [
-#include <string.h>
-],
-[ char buf[20];
-  buf[0]='\0';
-  strlcat(buf, "KDE function test", sizeof(buf));
-],
- 	[unsigned long strlcat(char*, const char*, unsigned long)],
-	[STRLCAT])
-])
-
-AC_DEFUN(AC_FIND_GIF,
-   [AC_MSG_CHECKING([for giflib])
-AC_CACHE_VAL(ac_cv_lib_gif,
-[ac_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$all_libraries -lgif -lX11 $LIBSOCKET"
-else
-LIBS="$all_libraries -lgif"
-fi
-AC_TRY_LINK(dnl
-[
-#ifdef __cplusplus
-extern "C" {
-#endif
-int GifLastError(void);
-#ifdef __cplusplus
-}
-#endif
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-],
-            [return GifLastError();],
-            eval "ac_cv_lib_gif=yes",
-            eval "ac_cv_lib_gif=no")
-LIBS="$ac_save_LIBS"
-])dnl
-if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then
-  AC_MSG_RESULT(yes)
-  AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif])
-else
-  AC_MSG_ERROR(You need giflib30. Please install the tdesupport package)
-fi
-])
-
-AC_DEFUN(KDE_FIND_JPEG_HELPER,
-[
-AC_MSG_CHECKING([for libjpeg$2])
-AC_CACHE_VAL(ac_cv_lib_jpeg_$1,
-[
-AC_LANG_C
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(
-[/* Override any gcc2 internal prototype to avoid an error.  */
-struct jpeg_decompress_struct;
-typedef struct jpeg_decompress_struct * j_decompress_ptr;
-typedef int size_t;
-#ifdef __cplusplus
-extern "C" {
-#endif
-    void jpeg_CreateDecompress(j_decompress_ptr cinfo,
-                                    int version, size_t structsize);
-#ifdef __cplusplus
-}
-#endif
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-],
-            [jpeg_CreateDecompress(0L, 0, 0);],
-            eval "ac_cv_lib_jpeg_$1=-ljpeg$2",
-            eval "ac_cv_lib_jpeg_$1=no")
-LIBS="$ac_save_LIBS"
-CFLAGS="$ac_save_CFLAGS"
-])
-
-if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then
-  LIBJPEG="$ac_cv_lib_jpeg_$1"
-  AC_MSG_RESULT($ac_cv_lib_jpeg_$1)
-else
-  AC_MSG_RESULT(no)
-  $3
-fi
-
-])
-
-AC_DEFUN(AC_FIND_JPEG,
-[
-dnl first look for libraries
-KDE_FIND_JPEG_HELPER(6b, 6b,
-   KDE_FIND_JPEG_HELPER(normal, [],
-    [
-       LIBJPEG=
-    ]
-   )
-)
-
-dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h
-dnl requires system dependent includes loaded before it)
-jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes"
-AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir)
-test "x$jpeg_incdir" = xNO && jpeg_incdir=
-
-dnl if headers _and_ libraries are missing, this is no error, and we
-dnl continue with a warning (the user will get no jpeg support in tdehtml)
-dnl if only one is missing, it means a configuration error, but we still
-dnl only warn
-if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg])
-else
-  if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
-    AC_MSG_WARN([
-There is an installation error in jpeg support. You seem to have only one
-of either the headers _or_ the libraries installed. You may need to either
-provide correct --with-extra-... options, or the development package of
-libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
-Disabling JPEG support.
-])
-  else
-    AC_MSG_WARN([libjpeg not found. disable JPEG support.])
-  fi
-  jpeg_incdir=
-  LIBJPEG=
-fi
-
-AC_SUBST(LIBJPEG)
-AH_VERBATIM(_AC_CHECK_JPEG,
-[/*
- * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
- * headers and I'm too lazy to write a configure test as long as only
- * unixware is related
- */
-#ifdef _UNIXWARE
-#define HAVE_BOOLEAN
-#endif
-])
-])
-
-AC_DEFUN(KDE_CHECK_QT_JPEG,
-[
-if test -n "$LIBJPEG"; then
-AC_MSG_CHECKING([if Qt needs $LIBJPEG])
-AC_CACHE_VAL(kde_cv_qt_jpeg,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS $LIBQT"
-LIBS=`echo $LIBS | sed "s/$LIBJPEG//"`
-ac_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(
-[#include <ntqapplication.h>],
-            [
-            int argc;
-            char** argv;
-            QApplication app(argc, argv);],
-            eval "kde_cv_qt_jpeg=no",
-            eval "kde_cv_qt_jpeg=yes")
-LIBS="$ac_save_LIBS"
-CXXFLAGS="$ac_save_CXXFLAGS"
-AC_LANG_RESTORE
-fi
-])
-
-if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then
-  AC_MSG_RESULT(yes)
-  LIBJPEG_QT='$(LIBJPEG)'
-else
-  AC_MSG_RESULT(no)
-  LIBJPEG_QT=
-fi
-
-])
-
-AC_DEFUN(AC_FIND_ZLIB,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_MSG_CHECKING([for libz])
-AC_CACHE_VAL(ac_cv_lib_z,
-[
-AC_LANG_C
-kde_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(dnl
-[
-#include<zlib.h>
-],
-[
-  char buf[42];
-  gzFile f = (gzFile) 0;
-  /* this would segfault.. but we only link, don't run */
-  (void) gzgets(f, buf, sizeof(buf));
-
-  return (zlibVersion() == ZLIB_VERSION); 
-],
-            eval "ac_cv_lib_z='-lz'",
-            eval "ac_cv_lib_z=no")
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if test ! "$ac_cv_lib_z" = no; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz])
-  LIBZ="$ac_cv_lib_z"
-  AC_MSG_RESULT($ac_cv_lib_z)
-else
-  AC_MSG_ERROR(not found. 
-          Possibly configure picks up an outdated version
-          installed by XFree86. Remove it from your system.
-
-          Check your installation and look into config.log)
-  LIBZ=""
-fi
-AC_SUBST(LIBZ)
-])
-
-AC_DEFUN(KDE_TRY_TIFFLIB,
-[
-AC_MSG_CHECKING([for libtiff $1])
-
-AC_CACHE_VAL(kde_cv_libtiff_$1,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-kde_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm"
-else
-LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm"
-fi
-kde_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
-
-AC_TRY_LINK(dnl
-[
-#include<tiffio.h>
-],
-    [return (TIFFOpen( "", "r") == 0); ],
-[
-    kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ"
-], [
-    kde_cv_libtiff_$1=no
-])
-
-LIBS="$kde_save_LIBS"
-CXXFLAGS="$kde_save_CXXFLAGS"
-AC_LANG_RESTORE
-])
-
-if test "$kde_cv_libtiff_$1" = "no"; then
-    AC_MSG_RESULT(no)
-    LIBTIFF=""
-    $3
-else
-    LIBTIFF="$kde_cv_libtiff_$1"
-    AC_MSG_RESULT(yes)
-    AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff])
-    $2
-fi
-
-])
-
-AC_DEFUN(AC_FIND_TIFF,
-[
-AC_REQUIRE([K_PATH_X])
-AC_REQUIRE([AC_FIND_ZLIB])
-AC_REQUIRE([AC_FIND_JPEG])
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
-KDE_TRY_TIFFLIB(tiff, [],
-   KDE_TRY_TIFFLIB(tiff34))
-
-AC_SUBST(LIBTIFF)
-])
-
-
-AC_DEFUN(AC_FIND_PNG,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_REQUIRE([AC_FIND_ZLIB])
-AC_MSG_CHECKING([for libpng])
-AC_CACHE_VAL(ac_cv_lib_png,
-[
-kde_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
-else
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm"
-fi
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_LANG_C
-AC_TRY_LINK(dnl
-    [
-    #include<png.h>
-    ],
-    [
-    png_structp png_ptr = png_create_read_struct(  /* image ptr */
-		PNG_LIBPNG_VER_STRING, 0, 0, 0 );
-    return( png_ptr != 0 );
-    ],
-    eval "ac_cv_lib_png='-lpng $LIBZ -lm'",
-    eval "ac_cv_lib_png=no"
-)
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng])
-  LIBPNG="$ac_cv_lib_png"
-  AC_SUBST(LIBPNG)
-  AC_MSG_RESULT($ac_cv_lib_png)
-else
-  AC_MSG_RESULT(no)
-  LIBPNG=""
-  AC_SUBST(LIBPNG)
-fi
-])
-
-
-AC_DEFUN(AC_FIND_JASPER,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_REQUIRE([AC_FIND_JPEG])
-AC_MSG_CHECKING([for jasper])
-AC_CACHE_VAL(ac_cv_jasper,
-[
-kde_save_LIBS="$LIBS"
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_LANG_C
-AC_TRY_LINK(dnl
-    [
-    #include<jasper/jasper.h>
-    ],
-    [
-    return( jas_init() );
-    ],
-    eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'",
-    eval "ac_cv_jasper=no"
-)
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then
-  AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper])
-  LIB_JASPER="$ac_cv_jasper"
-  AC_MSG_RESULT($ac_cv_jasper)
-else
-  AC_MSG_RESULT(no)
-  LIB_JASPER=""
-fi
-AC_SUBST(LIB_JASPER)
-])
-
-AC_DEFUN(AC_CHECK_BOOL,
-[
-  AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool])
-])
-
-AC_DEFUN(AC_CHECK_GNU_EXTENSIONS,
-[
-AC_MSG_CHECKING(if you need GNU extensions)
-AC_CACHE_VAL(ac_cv_gnu_extensions,
-[
-cat > conftest.c << EOF
-#include <features.h>
-
-#ifdef __GNU_LIBRARY__
-yes
-#endif
-EOF
-
-if (eval "$ac_cpp conftest.c") 2>&5 |
-  egrep "yes" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_gnu_extensions=yes
-else
-  ac_cv_gnu_extensions=no
-fi
-])
-
-AC_MSG_RESULT($ac_cv_gnu_extensions)
-if test "$ac_cv_gnu_extensions" = "yes"; then
-  AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_COMPILER_FLAG,
-[
-AC_MSG_CHECKING([whether $CXX supports -$1])
-kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'`
-AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache,
-[
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -$1"
-  AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], [])
-  CXXFLAGS="$save_CXXFLAGS"
-  AC_LANG_RESTORE
-])
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- AC_MSG_RESULT(yes)
- :
- $2
-else
- AC_MSG_RESULT(no)
- :
- $3
-fi
-])
-
-dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables
-dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever])
-dnl it's all white-space separated
-AC_DEFUN(AC_REMOVE_FORBIDDEN,
-[ __val=$$1
-  __forbid=" $2 "
-  if test -n "$__val"; then
-    __new=""
-    ac_save_IFS=$IFS
-    IFS=" 	"
-    for i in $__val; do
-      case "$__forbid" in
-        *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;;
-	*) # Careful to not add spaces, where there were none, because otherwise
-	   # libtool gets confused, if we change e.g. CXX
-	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
-      esac
-    done
-    IFS=$ac_save_IFS
-    $1=$__new
-  fi
-])
-
-dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given
-AC_DEFUN(AC_VALIDIFY_CXXFLAGS,
-[dnl
-if test "x$kde_use_qt_emb" != "xyes"; then
- AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath])
- AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath])
-else
- AC_REMOVE_FORBIDDEN(CXX, [-rpath])
- AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath])
-fi
-])
-
-AC_DEFUN(AC_CHECK_COMPILERS,
-[
-  AC_ARG_ENABLE(debug,[  --enable-debug[=ARG]    enables debug symbols (yes|no|full) [default=no]],
-  [
-    case $enableval in
-      yes)
-        kde_use_debug_code="yes"
-        kde_use_debug_define=no
-        ;;
-      full)
-        kde_use_debug_code="full"
-        kde_use_debug_define=no
-        ;;
-      *)
-        kde_use_debug_code="no"
-        kde_use_debug_define=yes
-        ;;
-    esac
-  ], 
-    [kde_use_debug_code="no"
-      kde_use_debug_define=no
-  ])
-
-  dnl Just for configure --help
-  AC_ARG_ENABLE(dummyoption,[  --disable-debug         disables debug output and debug symbols [default=no]],[],[])
-
-  AC_ARG_ENABLE(strict,[  --enable-strict         compiles with strict compiler options (may not work!)],
-   [
-    if test $enableval = "no"; then
-         kde_use_strict_options="no"
-       else
-         kde_use_strict_options="yes"
-    fi
-   ], [kde_use_strict_options="no"])
-
-  AC_ARG_ENABLE(warnings,[  --disable-warnings      disables compilation with -Wall and similiar],
-   [
-    if test $enableval = "no"; then
-         kde_use_warnings="no"
-       else
-         kde_use_warnings="yes"
-    fi
-   ], [kde_use_warnings="yes"])
-
-  dnl enable warnings for debug build
-  if test "$kde_use_debug_code" != "no"; then
-    kde_use_warnings=yes
-  fi
-
-  AC_ARG_ENABLE(profile,[  --enable-profile        creates profiling infos [default=no]],
-    [kde_use_profiling=$enableval],
-    [kde_use_profiling="no"]
-  )
-
-  dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS
-  CFLAGS=" $CFLAGS"
-
-  AC_PROG_CC 
-
-  AC_PROG_CPP
-
-  if test "$GCC" = "yes"; then
-    if test "$kde_use_debug_code" != "no"; then
-      if test $kde_use_debug_code = "full"; then
-        CFLAGS="-g3 $CFLAGS"
-      else
-        CFLAGS="-g -O2 $CFLAGS"
-      fi
-    else
-      CFLAGS="-O2 $CFLAGS"
-    fi
-  fi
-
-  if test "$kde_use_debug_define" = "yes"; then
-    CFLAGS="-DNDEBUG $CFLAGS"
-  fi
-
-
-  case "$host" in
-  *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";;
-  *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";;
-  esac
-
-  if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
-     LDFLAGS=""
-  fi
-
-  CXXFLAGS=" $CXXFLAGS"
-
-  AC_PROG_CXX
-
-  if test "$GXX" = "yes" || test "$CXX" = "KCC"; then
-    if test "$kde_use_debug_code" != "no"; then
-      if test "$CXX" = "KCC"; then
-        CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
-      else
-        if test "$kde_use_debug_code" = "full"; then
-          CXXFLAGS="-g3 $CXXFLAGS"
-        else
-          CXXFLAGS="-g -O2 $CXXFLAGS"
-        fi
-      fi
-      KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"])
-
-      dnl convenience compiler flags
-      KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""])
-      AC_SUBST(WOVERLOADED_VIRTUAL)
-    else
-      if test "$CXX" = "KCC"; then
-        CXXFLAGS="+K3 $CXXFLAGS"
-      else
-        CXXFLAGS="-O2 $CXXFLAGS"
-      fi  
-    fi
-  fi
-
-  if test "$kde_use_debug_define" = "yes"; then
-    CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS"
-  fi  
-
-  if test "$kde_use_profiling" = "yes"; then
-    KDE_CHECK_COMPILER_FLAG(pg,
-    [
-      CFLAGS="-pg $CFLAGS"
-      CXXFLAGS="-pg $CXXFLAGS"
-    ])
-  fi
-
-  if test "$kde_use_warnings" = "yes"; then
-      if test "$GCC" = "yes"; then
-        case $host in
-          *-*-linux-gnu)	
-            CFLAGS="-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS"
-            CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS"
-            KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"; CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"])
-          ;;
-        esac
-        CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
-        KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"])
-        KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"])
-        KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"])
-     fi
-  fi
-
-  if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then
-    CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS"
-  fi
-    
-  if test "$GXX" = "yes"; then
-    KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"])
-    KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"])
-    KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"])
-    KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS=	)
-  fi
-  if test "$CXX" = "KCC"; then
-    dnl unfortunately we currently cannot disable exception support in KCC
-    dnl because doing so is binary incompatible and Qt by default links with exceptions :-(
-    dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"])
-    dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS=	)
-
-    AC_ARG_ENABLE(pch,[  --enable-pch            enables precompiled header support (currently only KCC) [default=no]],
-    [
-      kde_use_pch=$enableval
-    ],[kde_use_pch=no])
- 
-    if test "$kde_use_pch" = "yes"; then
-      dnl TODO: support --pch-dir!
-      KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"])
-      dnl the below works (but the dir must exist), but it's
-      dnl useless for a whole package.
-      dnl The are precompiled headers for each source file, so when compiling
-      dnl from scratch, it doesn't make a difference, and they take up
-      dnl around ~5Mb _per_ sourcefile.
-      dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp,
-      dnl   [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"])
-    fi
-    dnl this flag controls inlining. by default KCC inlines in optimisation mode
-    dnl all implementations that are defined inside the class {} declaration. 
-    dnl because of templates-compatibility with broken gcc compilers, this
-    dnl can cause excessive inlining. This flag limits it to a sane level
-    KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"])
-    KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"])
-    KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"])
-    KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"])
-    dnl Some source files are shared between multiple executables
-    dnl (or libraries) and some of those need template instantiations.
-    dnl In that case KCC needs to compile those sources with
-    dnl --one_instantiation_per_object.  To make it easy for us we compile
-    dnl _all_ objects with that flag (--one_per is a shorthand).
-    KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"])
-  fi
-  AC_SUBST(USE_EXCEPTIONS)
-  dnl obsolete macro - provided to keep things going
-  USE_RTTI=
-  AC_SUBST(USE_RTTI)
-
-  case "$host" in
-      *-*-irix*)  test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;;
-      *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";;
-      *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";;
-      *-*-solaris*) 
-        if test "$GXX" = yes; then
-          libstdcpp=`$CXX -print-file-name=libstdc++.so`
-          if test ! -f $libstdcpp; then
-             AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so])
-          fi
-        fi
-        ;;
-  esac
-
-  AC_VALIDIFY_CXXFLAGS
-
-  AC_PROG_CXXCPP
-
-  if test "$GCC" = yes; then
-     NOOPT_CFLAGS=-O0
-  fi
-  KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0])
-
-  AC_SUBST(NOOPT_CXXFLAGS)
-  AC_SUBST(NOOPT_CFLAGS)
-
-  KDE_CHECK_FINAL
-  KDE_CHECK_CLOSURE
-  KDE_CHECK_NMCHECK
-
-  ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), [])
-])
-
-AC_DEFUN(KDE_ADD_DEPENDENCIES,
-[
-   [A]M_DEPENDENCIES(CC)
-   [A]M_DEPENDENCIES(CXX)
-])
-
-dnl just a wrapper to clean up configure.in
-AC_DEFUN(KDE_PROG_LIBTOOL,
-[
-AC_REQUIRE([AC_CHECK_COMPILERS])
-AC_REQUIRE([AC_ENABLE_SHARED])
-AC_REQUIRE([AC_ENABLE_STATIC])
-
-AC_REQUIRE([AC_LIBTOOL_DLOPEN])
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_LANG_SAVE
-AC_LANG_C
-AC_OBJEXT
-AC_EXEEXT
-AC_LANG_RESTORE
-
-AM_PROG_LIBTOOL
-AC_LIBTOOL_CXX
-
-LIBTOOL_SHELL="/bin/sh ./libtool"
-#  LIBTOOL="$LIBTOOL --silent"
-KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)"
-AC_SUBST(KDE_PLUGIN)
-
-AC_ARG_ENABLE(objprelink, [  --enable-objprelink     prelink apps using objprelink (obsolete)],
-       kde_use_objprelink=$enableval, kde_use_objprelink=no)
-  if test "x$kde_use_objprelink" = "xyes"; then 
-        AC_MSG_WARN([
-------------------------------------------------------------
-Configuration option --enable-objprelink is no longer useful.
-See http:://objprelink.sourceforge.net for details:
-1- Recent binutils are fast enough to do without objprelink.
-2- Newer versions of objprelink do not need this option.
-------------------------------------------------------------
-])
-  fi
-])
-
-AC_DEFUN(KDE_CHECK_LIB64,
-[
-    tdelibsuff=none
-    AC_ARG_ENABLE(libsuffix,
-        AC_HELP_STRING([--enable-libsuffix],
-            [/lib directory suffix (64,32,none[=default])]),
-            tdelibsuff=$enableval)
-    # TODO: add an auto case that compiles a little C app to check
-    # where the glibc is
-    if test "$tdelibsuff" = "none"; then
-       tdelibsuff=
-    fi
-    if test -z "$tdelibsuff"; then
-        AC_MSG_RESULT([not using lib directory suffix])
-        AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories)
-    else
-        if test "$libdir" = '${exec_prefix}/lib'; then
-            libdir="$libdir${tdelibsuff}"
-            AC_SUBST([libdir], ["$libdir"])  dnl ugly hack for lib64 platforms
-        fi
-        AC_DEFINE_UNQUOTED(KDELIBSUFF, ["\"${tdelibsuff}\""], Suffix for lib directories)
-        AC_MSG_RESULT([using lib directory suffix $tdelibsuff])
-    fi
-])
-
-AC_DEFUN(KDE_CHECK_TYPES,
-[  AC_CHECK_SIZEOF(int, 4)dnl
-  AC_CHECK_SIZEOF(long, 4)dnl
-  AC_CHECK_SIZEOF(char *, 4)dnl
-])dnl
-
-AC_DEFUN(KDE_DO_IT_ALL,
-[
-AC_CANONICAL_SYSTEM
-AC_ARG_PROGRAM
-AM_INIT_AUTOMAKE($1, $2)
-AM_DISABLE_LIBRARIES
-AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde})
-AC_CHECK_COMPILERS
-KDE_PROG_LIBTOOL
-AM_KDE_WITH_NLS
-AC_PATH_KDE
-])
-
-AC_DEFUN(AC_CHECK_RPATH,
-[
-AC_MSG_CHECKING(for rpath)
-AC_ARG_ENABLE(rpath,
-      [  --disable-rpath         do not use the rpath feature of ld],
-      USE_RPATH=$enableval, USE_RPATH=yes)
-
-if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
-
-  KDE_RPATH="-R \$(kde_libraries)"
-
-  if test -n "$qt_libraries"; then
-    KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
-  fi
-  dnl $x_libraries is set to /usr/lib in case
-  if test -n "$X_LDFLAGS"; then
-    X_RPATH="-R \$(x_libraries)" 
-    KDE_RPATH="$KDE_RPATH $X_RPATH"
-  fi
-  if test -n "$KDE_EXTRA_RPATH"; then
-    KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
-  fi
-fi
-AC_SUBST(KDE_EXTRA_RPATH)
-AC_SUBST(KDE_RPATH)
-AC_SUBST(X_RPATH)
-AC_MSG_RESULT($USE_RPATH)
-])
-
-dnl Check for the type of the third argument of getsockname
-AC_DEFUN(AC_CHECK_SOCKLEN_T, [
-  AC_MSG_CHECKING(for socklen_t)
-  AC_CACHE_VAL(ac_cv_socklen_t, [
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <sys/socket.h>
-      ],[
-socklen_t a=0;
-getsockname(0,(struct sockaddr*)0, &a);
-      ],
-      ac_cv_socklen_t=socklen_t,
-      AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <sys/socket.h>
-        ],[
-int a=0;
-getsockname(0,(struct sockaddr*)0, &a);
-        ],
-        ac_cv_socklen_t=int,
-        ac_cv_socklen_t=size_t
-      )
-    )
-    AC_LANG_RESTORE
-  ])
-
-  AC_MSG_RESULT($ac_cv_socklen_t)
-  if test "$ac_cv_socklen_t" != "socklen_t"; then
-    AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t,
-        [Define the real type of socklen_t])
-  fi
-  AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define])
-
-])
-
-dnl This is a merge of some macros out of the gettext aclocal.m4
-dnl since we don't need anything, I took the things we need
-dnl the copyright for them is:
-dnl >
-dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-dnl This Makefile.in is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-dnl >
-dnl for this file it is relicensed under LGPL
-
-AC_DEFUN(AM_KDE_WITH_NLS,
-  [
-    dnl If we use NLS figure out what method
-
-    AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt,
-        [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt)
-    AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-
-     if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
-        AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it])
-        GMSGFMT=":"
-      fi
-      MSGFMT=$GMSGFMT
-      AC_SUBST(GMSGFMT)
-      AC_SUBST(MSGFMT)
-
-      AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext,
-	[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext programs is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-     AC_SUBST(XGETTEXT)
-
-  ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-# serial 1
-# Stephan Kulow: I appended a _KDE against name conflicts
-
-dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES])
-    fi
-  fi])
-
-dnl From Jim Meyering.
-dnl FIXME: migrate into libit.
-
-AC_DEFUN([AM_FUNC_OBSTACK],
-[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack,
- [AC_TRY_LINK([#include "obstack.h"],
-	      [struct obstack *mem;obstack_free(mem,(char *) 0)],
-	      am_cv_func_obstack=yes,
-	      am_cv_func_obstack=no)])
- if test $am_cv_func_obstack = yes; then
-   AC_DEFINE(HAVE_OBSTACK)
- else
-   LIBOBJS="$LIBOBJS obstack.o"
- fi
-])
-
-dnl From Jim Meyering.  Use this if you use the GNU error.[ch].
-dnl FIXME: Migrate into libit
-
-AC_DEFUN([AM_FUNC_ERROR_AT_LINE],
-[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line,
- [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");],
-              am_cv_lib_error_at_line=yes,
-	      am_cv_lib_error_at_line=no)])
- if test $am_cv_lib_error_at_line = no; then
-   LIBOBJS="$LIBOBJS error.o"
- fi
- AC_SUBST(LIBOBJS)dnl
-])
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-# Stephan Kulow: I put a KDE in it to avoid name conflicts
-
-AC_DEFUN(AM_KDE_GNU_GETTEXT,
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-   AC_REQUIRE([AM_KDE_WITH_NLS])dnl
-   AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
-   AC_MSG_CHECKING(for stpcpy)
-   AC_CACHE_VAL(kde_cv_func_stpcpy,
-   [
-   kde_safe_cxxflags=$CXXFLAGS
-   CXXFLAGS="-Werror"
-   AC_LANG_SAVE
-   AC_LANG_CPLUSPLUS
-   AC_TRY_COMPILE([
-   #include <string.h>
-   ],
-   [
-   char buffer[200];
-   stpcpy(buffer, buffer);
-   ],
-   kde_cv_func_stpcpy=yes,
-   kde_cv_func_stpcpy=no)
-   AC_LANG_RESTORE
-   CXXFLAGS=$kde_safe_cxxflags
-   ])
-   AC_MSG_RESULT($kde_cv_func_stpcpy)
-   if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then
-     AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy])
-   fi
-
-   AM_LC_MESSAGES
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-  ])
-
-AC_DEFUN(AC_HAVE_XPM,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$XPM_LDFLAGS" && XPM_LDFLAGS=
- test -z "$XPM_INCLUDE" && XPM_INCLUDE=
-
- AC_ARG_WITH(xpm, [  --without-xpm           disable color pixmap XPM tests],
-	xpm_test=$withval, xpm_test="yes")
- if test "x$xpm_test" = xno; then
-   ac_cv_have_xpm=no
- else
-   AC_MSG_CHECKING(for XPM)
-   AC_CACHE_VAL(ac_cv_have_xpm,
-   [
-    AC_LANG_C
-    ac_save_ldflags="$LDFLAGS"
-    ac_save_cflags="$CFLAGS"
-    if test "x$kde_use_qt_emb" != "xyes"; then
-      LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET"
-    else
-      LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET"
-    fi
-    CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES"
-    test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS"
-    AC_TRY_LINK([#include <X11/xpm.h>],[],
-	ac_cv_have_xpm="yes",ac_cv_have_xpm="no")
-    LDFLAGS="$ac_save_ldflags"
-    CFLAGS="$ac_save_cflags"
-   ])dnl
-
-  if test "$ac_cv_have_xpm" = no; then
-    AC_MSG_RESULT(no)
-    XPM_LDFLAGS=""
-    XPMINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support])
-    if test "$XPM_LDFLAGS" = ""; then
-       XPMLIB='-lXpm $(LIB_X11)'
-    else
-       XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)'
-    fi
-    if test "$XPM_INCLUDE" = ""; then
-       XPMINC=""
-    else
-       XPMINC="-I$XPM_INCLUDE"
-    fi
-    AC_MSG_RESULT(yes)
-    $1
-  fi
- fi
- AC_SUBST(XPMINC)
- AC_SUBST(XPMLIB)
-])
-
-AC_DEFUN(AC_HAVE_DPMS,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS=
- test -z "$DPMS_INCLUDE" && DPMS_INCLUDE=
- DPMS_LIB=
-
- AC_ARG_WITH(dpms, [  --without-dpms          disable DPMS power saving],
-	dpms_test=$withval, dpms_test="yes")
- if test "x$dpms_test" = xno; then
-   ac_cv_have_dpms=no
- else
-   AC_MSG_CHECKING(for DPMS)
-   dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms.
-   dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms".
-   AC_CACHE_VAL(ac_cv_have_dpms,
-   [
-    if test "x$kde_use_qt_emb" = "xyes"; then
-      AC_MSG_RESULT(no)
-      ac_cv_have_dpms="no"
-    else
-      AC_LANG_C
-      ac_save_ldflags="$LDFLAGS"
-      ac_save_cflags="$CFLAGS"
-      ac_save_libs="$LIBS"
-      LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
-      CFLAGS="$CFLAGS $X_INCLUDES"
-      test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
-      AC_TRY_LINK([
-	  #include <X11/Xproto.h>
-	  #include <X11/X.h>
-	  #include <X11/Xlib.h>
-	  #include <X11/extensions/dpms.h>
-	  int foo_test_dpms()
-	  { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
-	  ac_cv_have_dpms="yes", [
-              LDFLAGS="$ac_save_ldflags"
-              CFLAGS="$ac_save_cflags"
-              LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
-              LIBS="$LIBS -lXdpms"
-              CFLAGS="$CFLAGS $X_INCLUDES"
-              test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
-              AC_TRY_LINK([
-	          #include <X11/Xproto.h>
-        	  #include <X11/X.h>
-        	  #include <X11/Xlib.h>
-        	  #include <X11/extensions/dpms.h>
-        	  int foo_test_dpms()
-        	  { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
-        	  [
-                  ac_cv_have_dpms="-lXdpms"
-                  ],ac_cv_have_dpms="no")
-              ])
-      LDFLAGS="$ac_save_ldflags"
-      CFLAGS="$ac_save_cflags"
-      LIBS="$ac_save_libs"
-    fi
-   ])dnl
-
-  if test "$ac_cv_have_dpms" = no; then
-    AC_MSG_RESULT(no)
-    DPMS_LDFLAGS=""
-    DPMSINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support])
-    if test "$ac_cv_have_dpms" = "-lXdpms"; then
-       DPMS_LIB="-lXdpms"
-    fi
-    if test "$DPMS_LDFLAGS" = ""; then
-       DPMSLIB="$DPMS_LIB "'$(LIB_X11)'
-    else
-       DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)'
-    fi
-    if test "$DPMS_INCLUDE" = ""; then
-       DPMSINC=""
-    else
-       DPMSINC="-I$DPMS_INCLUDE"
-    fi
-    AC_MSG_RESULT(yes)
-    $1
-  fi
- fi
- AC_SUBST(DPMSINC)
- AC_SUBST(DPMSLIB)
-])
-
-AC_DEFUN(AC_HAVE_GL,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$GL_LDFLAGS" && GL_LDFLAGS=
- test -z "$GL_INCLUDE" && GL_INCLUDE=
-
- AC_ARG_WITH(gl, [  --without-gl            disable 3D GL modes],
-	gl_test=$withval, gl_test="yes")
- if test "x$kde_use_qt_emb" = "xyes"; then
-   # GL and Qt Embedded is a no-go for now.
-   ac_cv_have_gl=no
- elif test "x$gl_test" = xno; then
-   ac_cv_have_gl=no
- else
-   AC_MSG_CHECKING(for GL)
-   AC_CACHE_VAL(ac_cv_have_gl,
-   [
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_save_ldflags="$LDFLAGS"
-    ac_save_cxxflags="$CXXFLAGS"
-    LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU"
-    test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11"
-    LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET"
-    CXXFLAGS="$CFLAGS $X_INCLUDES"
-    test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
-    AC_TRY_LINK([#include <GL/gl.h>
-#include <GL/glu.h>
-], [],
-	ac_cv_have_gl="mesa", ac_cv_have_gl="no")
-    if test "x$ac_cv_have_gl" = "xno"; then
-      LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGLU -lGL"
-      test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11"
-      LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET"
-      CXXFLAGS="$ac_save_cflags $X_INCLUDES"
-      test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
-      AC_TRY_LINK([#include <GL/gl.h>
-#include <GL/glu.h>
-], [],
-	  ac_cv_have_gl="yes", ac_cv_have_gl="no")
-    fi
-    AC_LANG_RESTORE
-    LDFLAGS="$ac_save_ldflags"
-    CXXFLAGS="$ac_save_cxxflags"
-   ])dnl
-
-  if test "$ac_cv_have_gl" = "no"; then
-    AC_MSG_RESULT(no)
-    GL_LDFLAGS=""
-    GLINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)])
-    if test "$GL_LDFLAGS" = ""; then
-       if test "$ac_cv_have_gl" = "mesa"; then
-          GLLIB='-lMesaGLU -lMesaGL $(LIB_X11)'
-       else
-          GLLIB='-lGLU -lGL $(LIB_X11)'
-       fi
-    else
-       if test "$ac_cv_have_gl" = "mesa"; then
-          GLLIB="$GL_LDFLAGS -lMesaGLU -lMesaGL "'$(LIB_X11)'
-       else
-          GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)'
-       fi
-    fi
-    if test "$GL_INCLUDE" = ""; then
-       GLINC=""
-    else
-       GLINC="-I$GL_INCLUDE"
-    fi
-    AC_MSG_RESULT($ac_cv_have_gl)
-    $1
-  fi
- fi
- AC_SUBST(GLINC)
- AC_SUBST(GLLIB)
-])
-
-
- dnl shadow password and PAM magic - maintained by ossi@kde.org
-
-AC_DEFUN(KDE_PAM, [
-  AC_REQUIRE([KDE_CHECK_LIBDL])
-
-  AC_ARG_WITH(pam,
-    [  --with-pam[=ARG]        enable support for PAM: ARG=[yes|no|service name]],
-    [ if test "x$withval" = "xyes"; then
-        use_pam=yes
-        pam_service=kde
-      elif test "x$withval" = "xno"; then
-        use_pam=no
-      else
-        use_pam=yes
-        pam_service=$withval
-      fi
-      ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service"
-    ], [
-      AC_CACHE_VAL(ac_cv_path_pam,
-        [ use_pam=no
-          AC_CHECK_LIB(pam, pam_start,
-            [ AC_CHECK_HEADER(security/pam_appl.h,
-                [ use_pam=yes
-                  pam_service=kde ]) 
-            ], , $LIBDL)
-          ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service"
-        ])
-    ])
-  eval "$ac_cv_path_pam"
-
-  AC_MSG_CHECKING(for PAM)
-  if test "x$use_pam" = xno; then
-    AC_MSG_RESULT(no)
-    PAMLIBS=""
-  else
-    AC_MSG_RESULT(yes)
-    AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)])
-    PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL"
-
-    dnl test whether struct pam_message is const (Linux) or not (Sun)
-    AC_MSG_CHECKING(for const pam_message)
-    AC_EGREP_HEADER([struct pam_message], security/pam_appl.h,
-      [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h,
-                        [AC_MSG_RESULT([const: Linux-type PAM])],
-                        [AC_MSG_RESULT([nonconst: Sun-type PAM])
-                        AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])]
-                        )],
-      [AC_MSG_RESULT([not found - assume const, Linux-type PAM])])
-  fi
-
-  AC_SUBST(PAMLIBS)
-])
-
-dnl DEF_PAM_SERVICE(arg name, full name, define name)
-AC_DEFUN(DEF_PAM_SERVICE, [
-  AC_ARG_WITH($1-pam,
-    [  --with-$1-pam=[val]    override PAM service from --with-pam for $2],
-    [ if test "x$use_pam" = xyes; then
-        $3_PAM_SERVICE="$withval"
-      else
-        AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected.
-You may want to enforce it by using --with-pam.])
-      fi
-    ], 
-    [ if test "x$use_pam" = xyes; then
-        $3_PAM_SERVICE="$pam_service"
-      fi
-    ])
-    if test -n "$$3_PAM_SERVICE"; then
-      AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE])
-      AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2])
-    fi
-    AC_SUBST($3_PAM_SERVICE)
-])
-
-AC_DEFUN(KDE_SHADOWPASSWD, [
-  AC_REQUIRE([KDE_PAM])
-
-  AC_CHECK_LIB(shadow, getspent,
-    [ LIBSHADOW="-lshadow"
-      ac_use_shadow=yes
-    ],
-    [ dnl for UnixWare
-      AC_CHECK_LIB(gen, getspent, 
-        [ LIBGEN="-lgen"
-          ac_use_shadow=yes
-        ], 
-        [ AC_CHECK_FUNC(getspent, 
-            [ ac_use_shadow=yes ],
-            [ ac_use_shadow=no ])
-	])
-    ])
-  AC_SUBST(LIBSHADOW)
-  AC_SUBST(LIBGEN)
-  
-  AC_MSG_CHECKING([for shadow passwords])
-
-  AC_ARG_WITH(shadow,
-    [  --with-shadow		  If you want shadow password support ],
-    [ if test "x$withval" != "xno"; then
-        use_shadow=yes
-      else
-        use_shadow=no
-      fi
-    ], [
-      use_shadow="$ac_use_shadow"
-    ])
-
-  if test "x$use_shadow" = xyes; then
-    AC_MSG_RESULT(yes)
-    AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords])
-  else
-    AC_MSG_RESULT(no)
-    LIBSHADOW=
-    LIBGEN=
-  fi
-
-  dnl finally make the relevant binaries setuid root, if we have shadow passwds.
-  dnl this still applies, if we could use it indirectly through pam.
-  if test "x$use_shadow" = xyes || 
-     ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then
-      case $host in
-      *-*-freebsd* | *-*-netbsd* | *-*-openbsd*)
-	SETUIDFLAGS="-m 4755 -o root";;
-      *)
-	SETUIDFLAGS="-m 4755";;
-      esac
-  fi
-  AC_SUBST(SETUIDFLAGS)
-
-])
-
-AC_DEFUN(KDE_PASSWDLIBS, [
-  AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT
-  AC_REQUIRE([KDE_PAM])
-  AC_REQUIRE([KDE_SHADOWPASSWD])
-
-  if test "x$use_pam" = "xyes"; then 
-    PASSWDLIBS="$PAMLIBS"
-  else
-    PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN"
-  fi
-
-  dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but
-  dnl /etc/master.passwd holds the actual passwords.  /etc/master.passwd requires
-  dnl root to read, so kcheckpass needs to be root (even when using pam, since pam
-  dnl may need to read /etc/master.passwd).
-  case $host in
-  *-*-freebsd*)
-    SETUIDFLAGS="-m 4755 -o root"
-    ;;
-  *)
-    ;;
-  esac
-
-  AC_SUBST(PASSWDLIBS)
-])
-
-AC_DEFUN(KDE_CHECK_LIBDL,
-[
-AC_CHECK_LIB(dl, dlopen, [
-LIBDL="-ldl"
-ac_cv_have_dlfcn=yes
-])
-
-AC_CHECK_LIB(dld, shl_unload, [
-LIBDL="-ldld"
-ac_cv_have_shload=yes
-])
-
-AC_SUBST(LIBDL)
-])
-
-AC_DEFUN(KDE_CHECK_DLOPEN,
-[
-KDE_CHECK_LIBDL
-AC_CHECK_HEADERS(dlfcn.h dl.h)
-if test "$ac_cv_header_dlfcn_h" = "no"; then
-  ac_cv_have_dlfcn=no
-fi
-
-if test "$ac_cv_header_dl_h" = "no"; then
-  ac_cv_have_shload=no
-fi
-
-dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE
-dnl (MM)
-AC_ARG_ENABLE(dlopen,
-[  --disable-dlopen        link statically [default=no]] ,
-enable_dlopen=$enableval,
-enable_dlopen=yes)
-
-# override the user's opinion, if we know it better ;)
-if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then
-  enable_dlopen=no
-fi
-
-if test "$ac_cv_have_dlfcn" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn])
-fi
-
-if test "$ac_cv_have_shload" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload])
-fi
-
-if test "$enable_dlopen" = no ; then
-  test -n "$1" && eval $1
-else
-  test -n "$2" && eval $2
-fi
-
-])
-
-AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING,
-[
-KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no)
-KDE_PROG_LIBTOOL
-AC_MSG_CHECKING([dynamic loading])
-eval "`egrep '^build_libtool_libs=' libtool`"
-if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then
-  dynamic_loading=yes
-  AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING)
-else
-  dynamic_loading=no
-fi
-AC_MSG_RESULT($dynamic_loading)
-if test "$dynamic_loading" = "yes"; then
-  $1
-else
-  $2
-fi
-])
-
-AC_DEFUN(KDE_ADD_INCLUDES,
-[
-if test -z "$1"; then
-  test_include="Pix.h"
-else
-  test_include="$1"
-fi
-
-AC_MSG_CHECKING([for libg++ ($test_include)])
-
-AC_CACHE_VAL(kde_cv_libgpp_includes,
-[
-kde_cv_libgpp_includes=no
-
-   for ac_dir in               \
-                               \
-     /usr/include/g++          \
-     /usr/include              \
-     /usr/unsupported/include  \
-     /opt/include              \
-     $extra_include            \
-     ; \
-   do
-     if test -r "$ac_dir/$test_include"; then
-       kde_cv_libgpp_includes=$ac_dir
-       break
-     fi
-   done
-])
-
-AC_MSG_RESULT($kde_cv_libgpp_includes)
-if test "$kde_cv_libgpp_includes" != "no"; then
-  all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES"
-fi
-])
-])
-
-
-AC_DEFUN(KDE_CHECK_MICO,
-[
-AC_REQUIRE([KDE_CHECK_LIBDL])
-AC_REQUIRE([KDE_MISC_TESTS])
-AC_MSG_CHECKING(for MICO)
-
-if test -z "$MICODIR"; then
-    kde_micodir=/usr/local
- else
-    kde_micodir="$MICODIR"
-fi
-
-AC_ARG_WITH(micodir,
-  [  --with-micodir=micodir  where mico is installed ],
-  kde_micodir=$withval,
-  kde_micodir=$kde_micodir
-)
-
-AC_CACHE_VAL(kde_cv_mico_incdir,
-[
-  mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
-AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
-
-])
-kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
-
-if test ! -r  $kde_micodir/include/CORBA.h; then
-  AC_MSG_ERROR([No CORBA.h found, specify another micodir])
-fi
-
-AC_MSG_RESULT($kde_micodir)
-
-MICO_INCLUDES=-I$kde_micodir/include
-AC_SUBST(MICO_INCLUDES)
-MICO_LDFLAGS=-L$kde_micodir/lib
-AC_SUBST(MICO_LDFLAGS)
-micodir=$kde_micodir
-AC_SUBST(micodir)
-
-AC_MSG_CHECKING([for MICO version])
-AC_CACHE_VAL(kde_cv_mico_version,
-[
-AC_LANG_C
-cat >conftest.$ac_ext <<EOF
-#include <stdio.h>
-#include <mico/version.h>
-int main() {
-
-   printf("MICO_VERSION=%s\n",MICO_VERSION);
-   return (0);
-}
-EOF
-ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
-if AC_TRY_EVAL(ac_compile); then
-  if eval `./conftest 2>&5`; then
-    kde_cv_mico_version=$MICO_VERSION
-  else
-    AC_MSG_ERROR([your system is not able to execute a small application to
-    find MICO version! Check $kde_micodir/include/mico/version.h])
-  fi
-else
-  AC_MSG_ERROR([your system is not able to compile a small application to
-  find MICO version! Check $kde_micodir/include/mico/version.h])
-fi
-])
-
-dnl installed MICO version
-mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
-mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
-mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
-
-if test "x$1" = "x"; then
- req_version="2.3.0"
-else
- req_version=$1
-fi
-
-dnl required MICO version
-req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
-req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
-req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
-
-if test "$mico_v_maj" -lt "$req_v_maj" || \
-   ( test "$mico_v_maj" -eq "$req_v_maj" && \
-        test "$mico_v_mid" -lt "$req_v_mid" ) || \
-   ( test "$mico_v_mid" -eq "$req_v_mid" && \
-        test "$mico_v_min" -lt "$req_v_min" )
-
-then
-  AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
-at least is required. You should upgrade MICO.])
-else
-  AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
-fi
-
-LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
-AC_SUBST(LIBMICO)
-if test -z "$IDL"; then
-  IDL='$(kde_bindir)/cuteidl'
-fi
-AC_SUBST(IDL)
-IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
-AC_SUBST(IDL_DEPENDENCIES)
-
-idldir="\$(includedir)/idl"
-AC_SUBST(idldir)
-
-])
-
-AC_DEFUN(KDE_CHECK_MINI_STL,
-[
-AC_REQUIRE([KDE_CHECK_MICO])
-
-AC_MSG_CHECKING(if we use mico's mini-STL)
-AC_CACHE_VAL(kde_cv_have_mini_stl,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-kde_save_cxxflags="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
-AC_TRY_COMPILE(
-[
-#include <mico/config.h>
-],
-[
-#ifdef HAVE_MINI_STL
-#error "nothing"
-#endif
-],
-kde_cv_have_mini_stl=no,
-kde_cv_have_mini_stl=yes)
-CXXFLAGS="$kde_save_cxxflags"
-AC_LANG_RESTORE
-])
-
-if test "x$kde_cv_have_mini_stl" = "xyes"; then
-   AC_MSG_RESULT(yes)
-   $1
-else
-   AC_MSG_RESULT(no)
-   $2
-fi
-])
-
-])
-
-
-AC_DEFUN(KDE_CHECK_LIBPTHREAD,
-[
-AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] )
-AC_SUBST(LIBPTHREAD)
-])
-
-AC_DEFUN(KDE_CHECK_PTHREAD_OPTION,
-[
-    AC_ARG_ENABLE(kernel-threads, [  --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.],
-	kde_use_kernthreads=$enableval, kde_use_kernthreads=no)
-
-    if test "$kde_use_kernthreads" = "yes"; then
-      ac_save_CXXFLAGS="$CXXFLAGS"
-      ac_save_CFLAGS="$CFLAGS"
-      CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
-      CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
-      AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h)
-      CXXFLAGS="$ac_save_CXXFLAGS"
-      CFLAGS="$ac_save_CFLAGS"
-      if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
-        kde_use_kernthreads=no
-      else
-        dnl Add proper -I and -l statements
-        AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD
-        if test "x$LIBPTHREAD" = "x"; then
-          kde_use_kernthreads=no
-        else
-          USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
-        fi
-      fi
-    else 
-      USE_THREADS=""
-      if test -z "$LIBPTHREAD"; then
-        KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] )
-      fi
-    fi
-
-    AH_VERBATIM(__svr_define, [
-#if defined(__SVR4) && !defined(__svr4__)
-#define __svr4__ 1
-#endif
-])
-    case $host_os in
- 	solaris*)
-		KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"])
-                CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4"
-    		;;
-        freebsd*)
-                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
-                ;;
-        aix*)
-                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
-                LIBPTHREAD="$LIBPTHREAD -lc_r"
-                ;;
-        linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
-                if test "$CXX" = "KCC"; then
-                  CXXFLAGS="$CXXFLAGS --thread_safe"
-		  NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe"
-                fi
-                ;;
-	*)
-		;;
-    esac
-    AC_SUBST(USE_THREADS)
-    AC_SUBST(LIBPTHREAD)
-])
-
-AC_DEFUN(KDE_CHECK_THREADING,
-[
-  AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
-  AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION])
-  dnl default is yes if libpthread is found and no if no libpthread is available
-  if test -z "$LIBPTHREAD"; then
-    if test -z "$USE_THREADS"; then
-      kde_check_threading_default=no
-    else
-      kde_check_threading_default=yes
-    fi
-  else
-    kde_check_threading_default=yes
-  fi
-  AC_ARG_ENABLE(threading, [  --disable-threading     disables threading even if libpthread found ],
-   kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default)
-  if test "x$kde_use_threading" = "xyes"; then
-    AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)])
-  fi
-])
-
-AC_DEFUN(KDE_TRY_LINK_PYTHON,
-[
-if test "$kde_python_link_found" = no; then
-
-if test "$1" = normal; then
-  AC_MSG_CHECKING(if a Python application links)
-else
-  AC_MSG_CHECKING(if Python depends on $2)
-fi
-
-AC_CACHE_VAL(kde_cv_try_link_python_$1,
-[
-AC_LANG_SAVE
-AC_LANG_C
-kde_save_cflags="$CFLAGS"
-CFLAGS="$CFLAGS $PYTHONINC"
-kde_save_libs="$LIBS"
-LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET"
-kde_save_ldflags="$LDFLAGS"
-LDFLAGS="$LDFLAGS $PYTHONLIB"
-
-AC_TRY_LINK(
-[
-#include <Python.h>
-],[
-	PySys_SetArgv(1, 0);
-],
-	[kde_cv_try_link_python_$1=yes],
-	[kde_cv_try_link_python_$1=no]
-)
-CFLAGS="$kde_save_cflags"
-LIBS="$kde_save_libs"
-LDFLAGS="$kde_save_ldflags"
-])
-
-if test "$kde_cv_try_link_python_$1" = "yes"; then
-  AC_MSG_RESULT(yes)
-  kde_python_link_found=yes
-  if test ! "$1" = normal; then
-    LIBPYTHON="$LIBPYTHON $2"
-  fi
-  $3
-else
-  AC_MSG_RESULT(no)
-  $4
-fi
-AC_LANG_RESTORE
-
-fi
-
-])
-
-AC_DEFUN(KDE_CHECK_PYTHON_DIR,
-[
-AC_MSG_CHECKING([for Python directory])
- 
-AC_CACHE_VAL(kde_cv_pythondir,
-[
-  if test -z "$PYTHONDIR"; then
-    kde_cv_pythondir=/usr/local
-  else
-    kde_cv_pythondir="$PYTHONDIR"
-  fi
-])
- 
-AC_ARG_WITH(pythondir,
-[  --with-pythondir=pythondir   use python installed in pythondir ],
-[
-  ac_python_dir=$withval
-], ac_python_dir=$kde_cv_pythondir
-)
- 
-AC_MSG_RESULT($ac_python_dir)
-])
-
-AC_DEFUN(KDE_CHECK_PYTHON_INTERN,
-[
-AC_REQUIRE([KDE_CHECK_LIBDL])
-AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
-AC_REQUIRE([KDE_CHECK_PYTHON_DIR])
-
-if test -z "$1"; then
-  version="1.5"
-else
-  version="$1"
-fi
-
-AC_MSG_CHECKING([for Python$version])
-
-python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes"
-AC_FIND_FILE(Python.h, $python_incdirs, python_incdir)
-if test ! -r $python_incdir/Python.h; then
-  AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir)
-  python_incdir=$python_incdir/python$version
-  if test ! -r $python_incdir/Python.h; then
-    python_incdir=no
-  fi
-fi
-
-PYTHONINC=-I$python_incdir
-
-python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
-AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir)
-if test ! -r $python_libdir/libpython$version.a; then
-  AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir)
-  python_libdir=$python_libdir/python$version/config
-  if test ! -r $python_libdir/libpython$version.a; then
-    python_libdir=no
-  fi
-fi
-
-PYTHONLIB=-L$python_libdir
-kde_orig_LIBPYTHON=$LIBPYTHON
-if test -z "$LIBPYTHON"; then
-  LIBPYTHON=-lpython$version
-fi
-
-python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
-AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir)
-python_moddir=$python_moddir/python$version
-if test ! -r $python_moddir/copy.py; then
-  python_moddir=no
-fi
-
-PYTHONMODDIR=$python_moddir
-
-AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir)
-
-if test x$python_incdir = xno ||  test x$python_libdir = xno ||  test x$python_moddir = xno; then
-   LIBPYTHON=$kde_orig_LIBPYTHON
-   test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB=""
-   test "x$PYTHONINC" = "x-Ino" && PYTHONINC=""
-   $2
-else 
-  dnl Note: this test is very weak
-  kde_python_link_found=no
-  KDE_TRY_LINK_PYTHON(normal)
-  KDE_TRY_LINK_PYTHON(m, -lm)
-  KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD)
-  KDE_TRY_LINK_PYTHON(tcl, -ltcl)
-  KDE_TRY_LINK_PYTHON(db2, -ldb2)
-  KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil])
-  KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil])
-  KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm])
-  KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [],
-	[AC_MSG_WARN([it seems, Python depends on another library.
-    Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this
-    and contact the authors to let them know about this problem])
-	])
-
-  LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET"
-  AC_SUBST(PYTHONINC)
-  AC_SUBST(PYTHONLIB)
-  AC_SUBST(LIBPYTHON)
-  AC_SUBST(PYTHONMODDIR)
-  AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python])
-fi
-
-])
-
-
-AC_DEFUN(KDE_CHECK_PYTHON,
-[
-  KDE_CHECK_PYTHON_INTERN("2.3", 
-   [KDE_CHECK_PYTHON_INTERN("2.2", 
-     [KDE_CHECK_PYTHON_INTERN("2.1", 
-       [KDE_CHECK_PYTHON_INTERN("2.0", 
-         [KDE_CHECK_PYTHON_INTERN($1, $2) ])
-       ])
-     ])
-   ])
-])
-
-AC_DEFUN(KDE_CHECK_STL_SGI,
-[
-    AC_MSG_CHECKING([if STL implementation is SGI like])
-    AC_CACHE_VAL(kde_cv_stl_type_sgi,
-    [
-      AC_TRY_COMPILE([
-#include <string>
-using namespace std;
-],[
-  string astring="Hallo Welt.";
-  astring.erase(0, 6); // now astring is "Welt"
-  return 0;
-], kde_cv_stl_type_sgi=yes,
-   kde_cv_stl_type_sgi=no)
-])
-
-   AC_MSG_RESULT($kde_cv_stl_type_sgi)
-
-   if test "$kde_cv_stl_type_sgi" = "yes"; then
-	AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI])
-   fi
-])
-
-AC_DEFUN(KDE_CHECK_STL_HP,
-[
-    AC_MSG_CHECKING([if STL implementation is HP like])
-    AC_CACHE_VAL(kde_cv_stl_type_hp,
-    [
-      AC_TRY_COMPILE([
-#include <string>
-using namespace std;
-],[
-  string astring="Hello World";
-  astring.remove(0, 6); // now astring is "World"
-  return 0;
-], kde_cv_stl_type_hp=yes,
-   kde_cv_stl_type_hp=no)
-])
-   AC_MSG_RESULT($kde_cv_stl_type_hp)
-
-   if test "$kde_cv_stl_type_hp" = "yes"; then
-	AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP])
-   fi
-])
-
-AC_DEFUN(KDE_CHECK_STL,
-[
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_save_CXXFLAGS="$CXXFLAGS"
-    CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`"
-    KDE_CHECK_STL_SGI
-
-    if test "$kde_cv_stl_type_sgi" = "no"; then
-       KDE_CHECK_STL_HP
-
-       if test "$kde_cv_stl_type_hp" = "no"; then
-         AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?")
-       fi
-    fi
-
-    CXXFLAGS="$ac_save_CXXFLAGS"
-    AC_LANG_RESTORE
-])
-
-AC_DEFUN(AC_FIND_QIMGIO,
-   [AC_REQUIRE([AC_FIND_JPEG])
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_MSG_CHECKING([for qimgio])
-AC_CACHE_VAL(ac_cv_lib_qimgio,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_save_LIBS="$LIBS"
-ac_save_CXXFLAGS="$CXXFLAGS"
-LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT"
-CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
-AC_TRY_RUN(dnl
-[
-#include <qimageio.h>
-#include <ntqstring.h>
-int main() {
-		QString t = "hallo";
-		t.fill('t');
-		qInitImageIO();
-}
-],
-            ac_cv_lib_qimgio=yes,
-            ac_cv_lib_qimgio=no,
-	    ac_cv_lib_qimgio=no)
-LIBS="$ac_save_LIBS"
-CXXFLAGS="$ac_save_CXXFLAGS"
-AC_LANG_RESTORE
-])dnl
-if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then
-  LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG"
-  AC_MSG_RESULT(yes)
-  AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available])
-  AC_SUBST(LIBQIMGIO)
-else
-  AC_MSG_RESULT(not found)
-fi
-])
-
-AC_DEFUN(KDE_CHECK_ANSI,
-[
-])
-
-AC_DEFUN(KDE_CHECK_INSURE,
-[
-  AC_ARG_ENABLE(insure, [  --enable-insure             use insure++ for debugging [default=no]],
-  [
-  if test $enableval = "no"; dnl
-	then ac_use_insure="no"
-	else ac_use_insure="yes"
-   fi
-  ], [ac_use_insure="no"])
-
-  AC_MSG_CHECKING(if we will use Insure++ to debug)
-  AC_MSG_RESULT($ac_use_insure)
-  if test "$ac_use_insure" = "yes"; dnl
-       then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
-   fi
-])
-
-AC_DEFUN(AM_DISABLE_LIBRARIES,
-[
-    AC_PROVIDE([AM_ENABLE_STATIC])
-    AC_PROVIDE([AM_ENABLE_SHARED])
-    enable_static=no
-    enable_shared=yes
-])
-
-
-AC_DEFUN(AC_CHECK_UTMP_FILE,
-[
-    AC_MSG_CHECKING([for utmp file])
-
-    AC_CACHE_VAL(kde_cv_utmp_file,
-    [
-    kde_cv_utmp_file=no
-
-    for ac_file in    \
-                      \
-	/var/run/utmp \
-	/var/adm/utmp \
-	/etc/utmp     \
-     ; \
-    do
-     if test -r "$ac_file"; then
-       kde_cv_utmp_file=$ac_file
-       break
-     fi
-    done
-    ])
-
-    if test "$kde_cv_utmp_file" != "no"; then
-	AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries])
-	$1
-	AC_MSG_RESULT($kde_cv_utmp_file)
-    else
-    	$2
-	AC_MSG_RESULT([non found])
-    fi
-])
-
-
-AC_DEFUN(KDE_CREATE_SUBDIRSLIST,
-[
-
-DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
-
-if test ! -s $srcdir/subdirs; then
-  dnl Note: Makefile.common creates subdirs, so this is just a fallback
-  TOPSUBDIRS=""
-  files=`cd $srcdir && ls -1`
-  dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
-  for i in $dirs; do
-    echo $i >> $srcdir/subdirs
-  done
-fi
-
-if test -s $srcdir/inst-apps; then
-  ac_topsubdirs="`cat $srcdir/inst-apps`"
-else
-  ac_topsubdirs="`cat $srcdir/subdirs`"
-fi
-
-for i in $ac_topsubdirs; do
-  AC_MSG_CHECKING([if $i should be compiled])
-  if test -d $srcdir/$i; then
-    install_it="yes"
-    for j in $DO_NOT_COMPILE; do
-      if test $i = $j; then
-        install_it="no"
-      fi
-    done
-  else
-    install_it="no"
-  fi
-  AC_MSG_RESULT($install_it)
-  vari=`echo $i | sed -e 's,[[-+.]],_,g'`
-  if test $install_it = "yes"; then
-    TOPSUBDIRS="$TOPSUBDIRS $i"
-    eval "$vari""_SUBDIR_included=yes"
-  else
-    eval "$vari""_SUBDIR_included=no"
-  fi
-done
-
-AC_SUBST(TOPSUBDIRS)
-])
-
-AC_DEFUN(KDE_CHECK_NAMESPACES,
-[
-AC_MSG_CHECKING(whether C++ compiler supports namespaces)
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-AC_TRY_COMPILE([
-],
-[
-namespace Foo {
-  extern int i;
-  namespace Bar {
-    extern int i;
-  }
-}
-
-int Foo::i = 0;
-int Foo::Bar::i = 1;
-],[
-  AC_MSG_RESULT(yes)
-  AC_DEFINE(HAVE_NAMESPACES)
-], [
-AC_MSG_RESULT(no)
-])
-AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_NEWLIBS,
-[
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_CHECK_S_ISSOCK,
-[
-AC_MSG_CHECKING(for S_ISSOCK)
-AC_CACHE_VAL(ac_cv_have_s_issock,
-[
-AC_LANG_SAVE
-AC_LANG_C
-AC_TRY_LINK(
-[
-#include <sys/stat.h>
-],
-[
-struct stat buff;
-int b = S_ISSOCK( buff.st_mode );
-],
-ac_cv_have_s_issock=yes,
-ac_cv_have_s_issock=no)
-AC_LANG_RESTORE
-])
-AC_MSG_RESULT($ac_cv_have_s_issock)
-if test "$ac_cv_have_s_issock" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.])
-fi
-
-AH_VERBATIM(_ISSOCK,
-[
-#ifndef HAVE_S_ISSOCK
-#define HAVE_S_ISSOCK
-#define S_ISSOCK(mode) (1==0)
-#endif
-])
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_CHECK_KDEMAXPATHLEN,
-[
-AC_MSG_CHECKING(for MAXPATHLEN)
-AC_CACHE_VAL(ac_cv_maxpathlen,
-[
-AC_LANG_C
-cat > conftest.$ac_ext <<EOF
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-#include <sys/param.h>
-#ifndef MAXPATHLEN
-#define MAXPATHLEN 1024
-#endif
-
-KDE_HELLO MAXPATHLEN
-
-EOF
-
-ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out"
-
-if AC_TRY_EVAL(ac_try) && test -s conftest.out; then
-    ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out`
-else
-    ac_cv_maxpathlen=1024
-fi
-
-rm conftest.*
-
-])
-AC_MSG_RESULT($ac_cv_maxpathlen)
-AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] )
-])
-
-AC_DEFUN(KDE_CHECK_HEADER,
-[
-   AC_LANG_SAVE
-   kde_safe_cppflags=$CPPFLAGS
-   CPPFLAGS="$CPPFLAGS $all_includes"
-   AC_LANG_CPLUSPLUS
-   AC_CHECK_HEADER($1, $2, $3, $4)
-   CPPFLAGS=$kde_safe_cppflags
-   AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_HEADERS,
-[
-   AH_CHECK_HEADERS([$1])
-   AC_LANG_SAVE
-   kde_safe_cppflags=$CPPFLAGS
-   CPPFLAGS="$CPPFLAGS $all_includes"
-   AC_LANG_CPLUSPLUS
-   AC_CHECK_HEADERS([$1], [$2], [$3], [$4])
-   CPPFLAGS=$kde_safe_cppflags
-   AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_FAST_CONFIGURE,
-[
-  dnl makes configure fast (needs perl)
-  AC_ARG_ENABLE(fast-perl, [  --disable-fast-perl     disable fast Makefile generation (needs perl)],
-      with_fast_perl=$enableval, with_fast_perl=yes)
-])
-
-AC_DEFUN(KDE_CONF_FILES,
-[
-  val=
-  if test -f $srcdir/configure.files ; then
-    val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
-  fi
-  CONF_FILES=
-  if test -n "$val" ; then
-    for i in $val ; do
-      CONF_FILES="$CONF_FILES $i"
-    done
-  fi
-  AC_SUBST(CONF_FILES)
-])dnl
-
-AC_DEFUN(KDE_SET_PREFIX,
-[
-  unset CDPATH
-  dnl make $TDEDIR the default for the installation
-  AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde})
-
-  if test "x$prefix" = "xNONE"; then
-    prefix=$ac_default_prefix
-    ac_configure_args="$ac_configure_args --prefix=$prefix"
-  fi
-  # And delete superflous '/' to make compares easier
-  prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
-  exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
-  KDE_FAST_CONFIGURE
-  KDE_CONF_FILES
-])
-
-pushdef([AC_PROG_INSTALL],
-[
-  dnl our own version, testing for a -p flag
-  popdef([AC_PROG_INSTALL])
-  dnl as AC_PROG_INSTALL works as it works we first have
-  dnl to save if the user didn't specify INSTALL, as the
-  dnl autoconf one overwrites INSTALL and we have no chance to find
-  dnl out afterwards
-  test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
-  test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
-  test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
-  AC_PROG_INSTALL
-
-  if test -z "$kde_save_INSTALL_given" ; then
-    # OK, user hasn't given any INSTALL, autoconf found one for us
-    # now we test, if it supports the -p flag
-    AC_MSG_CHECKING(for -p flag to install)
-    rm -f confinst.$$.* > /dev/null 2>&1
-    echo "Testtest" > confinst.$$.orig
-    ac_res=no
-    if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
-      if test -f confinst.$$.new ; then
-        # OK, -p seems to do no harm to install
-	INSTALL="${INSTALL} -p"
-	ac_res=yes
-      fi
-    fi
-    rm -f confinst.$$.*
-    AC_MSG_RESULT($ac_res)
-  fi
-  dnl the following tries to resolve some signs and wonders coming up
-  dnl with different autoconf/automake versions
-  dnl e.g.:
-  dnl  *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s
-  dnl   and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS)
-  dnl   it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s
-  dnl  *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has
-  dnl   INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the
-  dnl   install-@DIR@PROGRAMS targets to explicitly use that flag
-  dnl  *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as
-  dnl   INSTALL_SCRIPT, which breaks with automake <= 1.4
-  dnl  *autoconf >2.13 (since 10.Apr 1999) has not that failure
-  dnl  *sometimes KDE does not use the install-@DIR@PROGRAM targets from
-  dnl   automake (due to broken Makefile.am or whatever) to install programs,
-  dnl   and so does not see the -s flag in automake > 1.4
-  dnl to clean up that mess we:
-  dnl  +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG
-  dnl   which cleans KDE's program with automake > 1.4;
-  dnl  +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems
-  dnl   with automake<=1.4
-  dnl  note that dues to this sometimes two '-s' flags are used (if KDE
-  dnl   properly uses install-@DIR@PROGRAMS, but I don't care
-  dnl
-  dnl And to all this comes, that I even can't write in comments variable
-  dnl  names used by automake, because it is so stupid to think I wanted to
-  dnl  _use_ them, therefor I have written A_M_... instead of AM_
-  dnl hmm, I wanted to say something ... ahh yes: Arghhh.
-
-  if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
-    INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
-  fi
-  if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
-    INSTALL_SCRIPT='${INSTALL}'
-  fi
-])dnl
-
-AC_DEFUN(KDE_LANG_CPLUSPLUS,
-[AC_LANG_CPLUSPLUS
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
-pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS])
-])
-
-pushdef([AC_LANG_CPLUSPLUS],
-[popdef([AC_LANG_CPLUSPLUS])
-KDE_LANG_CPLUSPLUS
-])
-
-AC_DEFUN(KDE_CHECK_LONG_LONG,
-[
-AC_MSG_CHECKING(for long long)
-AC_CACHE_VAL(kde_cv_c_long_long,
-[
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-  AC_TRY_LINK([], [
-  long long foo = 0;
-  foo = foo+1;
-  ],
-  kde_cv_c_long_long=yes, kde_cv_c_long_long=no)
-  AC_LANG_RESTORE
-])
-AC_MSG_RESULT($kde_cv_c_long_long)
-if test "$kde_cv_c_long_long" = yes; then
-   AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_LIB,
-[
-     kde_save_LDFLAGS="$LDFLAGS"
-     dnl AC_CHECK_LIB modifies LIBS, so save it here
-     kde_save_LIBS="$LIBS"
-     LDFLAGS="$LDFLAGS $all_libraries"
-     case $host_os in
-      aix*) LDFLAGS="-brtl $LDFLAGS"
-	test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS"
-	;;
-     esac
-     AC_CHECK_LIB($1, $2, $3, $4, $5)
-     LDFLAGS="$kde_save_LDFLAGS"
-     LIBS="$kde_save_LIBS"
-])
-
-AC_DEFUN(KDE_JAVA_PREFIX,
-[
-	dir=`dirname "$1"`
-	base=`basename "$1"`
-	list=`ls -1 $dir 2> /dev/null`
-	for entry in $list; do 
-		if test -d $dir/$entry/bin; then
-			case $entry in
-			   $base)
-				javadirs="$javadirs $dir/$entry/bin"
-				;;
-			esac
-		elif test -d $dir/$entry/jre/bin; then
-			case $entry in
-			   $base)
-				javadirs="$javadirs $dir/$entry/jre/bin"
-				;;
-			esac
-		fi
-	done
-])
-
-dnl KDE_CHEC_JAVA_DIR(onlyjre)
-AC_DEFUN(KDE_CHECK_JAVA_DIR,
-[
-
-AC_ARG_WITH(java,
-[  --with-java=javadir     use java installed in javadir, --without-java disables ],
-[  ac_java_dir=$withval
-], ac_java_dir=""
-)
-
-AC_MSG_CHECKING([for Java])
-
-dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH
-if test "x$ac_java_dir" = "xno"; then
-   kde_java_bindir=no
-   kde_java_includedir=no
-   kde_java_libjvmdir=no
-   kde_java_libhpidir=no
-else
-  if test "x$ac_java_dir" = "x"; then
-     
-     
-      dnl No option set -> look in $PATH
-      KDE_JAVA_PREFIX(/usr/j2se)
-      KDE_JAVA_PREFIX(/usr/j*dk*)
-      KDE_JAVA_PREFIX(/usr/lib/j*dk*)
-      KDE_JAVA_PREFIX(/opt/j*sdk*)
-      KDE_JAVA_PREFIX(/usr/lib/java*)
-      KDE_JAVA_PREFIX(/usr/java*)
-      KDE_JAVA_PREFIX(/usr/java/j*dk*)
-      KDE_JAVA_PREFIX(/usr/java/j*re*)
-      KDE_JAVA_PREFIX(/usr/lib/SunJava2*)
-      KDE_JAVA_PREFIX(/usr/lib/SunJava*)
-      KDE_JAVA_PREFIX(/usr/lib/IBMJava2*)
-      KDE_JAVA_PREFIX(/usr/lib/IBMJava*)
-      KDE_JAVA_PREFIX(/opt/java*)
-    
-      kde_cv_path="NONE"
-      kde_save_IFS=$IFS
-      IFS=':'
-      for dir in $PATH; do
-	  javadirs="$javadirs $dir"
-      done
-      IFS=$kde_save_IFS
-      jredirs=
-
-      for dir in $javadirs; do
-	  if test ! -d $dir; then break; fi
-          if test -x "$dir/java"; then
-                libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1`
-		if test ! -f $libjvmdir/libjvm.so; then continue; fi
-		jredirs="$jredirs $dir"
-	  fi
-      done
-
-      JAVAC=
-      JAVA=
-      kde_java_bindir=no
-      for dir in $jredirs; do
-	  JAVA="$dir/java"
-	  kde_java_bindir=$dir
-	  if test -x "$dir/javac"; then
-		JAVAC="$dir/javac"
-                break
-	  fi
-      done
-
-      if test -n "$JAVAC"; then
-          dnl this substitution might not work - well, we test for jni.h below
-          kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'`
-      else
-          kde_java_includedir=no
-      fi
-  else
-    dnl config option set
-    kde_java_bindir=$ac_java_dir/bin
-    if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then
-	kde_java_includedir=no
-    else
-        kde_java_includedir=$ac_java_dir/include
-    fi
-  fi
-fi
-
-dnl At this point kde_java_bindir and kde_java_includedir are either set or "no"
-if test "x$kde_java_bindir" != "xno"; then
-
-  dnl Look for libjvm.so
-  kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1`
-  dnl Look for libhpi.so and avoid green threads
-  kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1`
-
-  dnl Now check everything's fine under there
-  dnl the include dir is our flag for having the JDK
-  if test -d "$kde_java_includedir"; then
-    if test ! -x "$kde_java_bindir/javac"; then
-      AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.])
-    fi
-    if test ! -x "$kde_java_bindir/javah"; then
-      AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-    fi
-    if test ! -x "$kde_java_bindir/jar"; then
-      AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-    fi
-    if test ! -r "$kde_java_includedir/jni.h"; then
-      AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.])
-    fi
-
-    jni_includes="-I$kde_java_includedir"
-    dnl Strange thing, jni.h requires jni_md.h which is under genunix here..
-    dnl and under linux here..
-    test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux"
-    test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris"
-    test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix"
-
-  else
-    JAVAC=
-    jni_includes=
-  fi
-
-  if test ! -r "$kde_java_libjvmdir/libjvm.so"; then
-     AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.])
-  fi 
-
-  if test ! -x "$kde_java_bindir/java"; then
-      AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-  fi
-
-  if test ! -r "$kde_java_libhpidir/libhpi.so"; then
-    AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.])
-  fi
-
-  if test -n "$jni_includes"; then
-    dnl Check for JNI version
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_cxxflags_safe="$CXXFLAGS"
-    CXXFLAGS="$CXXFLAGS $all_includes $jni_includes"
-
-    AC_TRY_COMPILE([
-  #include <jni.h>
-	      ],
-	      [
-  #ifndef JNI_VERSION_1_2
-  Syntax Error
-  #endif
-	      ],[ kde_jni_works=yes ],
-	      [ kde_jni_works=no ])
-
-    if test $kde_jni_works = no; then
-      AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h.
-		    You need to have Java Development Kit (JDK) version 1.2. 
-
-		    Use --with-java to specify another location.
-		    Use --without-java to configure without java support.
-		    Or download a newer JDK and try again. 
-		    See e.g. http://java.sun.com/products/jdk/1.2 ])
-    fi
-
-    CXXFLAGS="$ac_cxxflags_safe"    
-    AC_LANG_RESTORE
-
-    dnl All tests ok, inform and subst the variables
-
-    JAVAC=$kde_java_bindir/javac
-    JAVAH=$kde_java_bindir/javah
-    JAR=$kde_java_bindir/jar
-    AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is])
-    JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi"
-    AC_MSG_RESULT([java JDK in $kde_java_bindir])
-
-  else
-      AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is])
-      AC_MSG_RESULT([java JRE in $kde_java_bindir])
-  fi
-else # no
-  AC_MSG_RESULT([none found])
-fi
-
-AC_SUBST(JAVAC)
-AC_SUBST(JAVAH)
-AC_SUBST(JAR)
-AC_SUBST(JVMLIBS)
-AC_SUBST(jni_includes)
-
-# for backward compat
-kde_cv_java_includedir=$kde_java_includedir
-kde_cv_java_bindir=$kde_java_bindir
-])
-
-dnl this is a redefinition of autoconf 2.5x's AC_FOREACH.
-dnl When the argument list becomes big, as in KDE for AC_OUTPUT in
-dnl big packages, m4_foreach is dog-slow.  So use our own version of
-dnl it.  (matz@kde.org)
-m4_define([mm_foreach],
-[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])])
-m4_define([mm_car], [[$1]])
-m4_define([mm_car2], [[$@]])
-m4_define([_mm_foreach],
-[m4_if(m4_quote($2), [], [],
-       [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1],
-                                                   mm_car2(m4_shift($2)),
-                                                   [$3])])])
-m4_define([AC_FOREACH],
-[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])])
-
-AC_DEFUN(KDE_NEED_FLEX,
-[
-kde_libs_safe=$LIBS
-LIBS="$LIBS $USER_LDFLAGS"
-AM_PROG_LEX
-LIBS=$kde_libs_safe
-if test -z "$LEXLIB"; then
-    AC_MSG_ERROR([You need to have flex installed.])
-fi
-AC_SUBST(LEXLIB)
-])
-
-AC_DEFUN(AC_PATH_QTOPIA,
-[
-  dnl TODO: use AC_CACHE_VAL
-
-  if test -z "$1"; then
-    qtopia_minver_maj=1
-    qtopia_minver_min=5
-    qtopia_minver_pat=0
-  else
-    qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"`
-    qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"`
-    qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"`
-  fi
-
-  qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat"
-  qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat"
-
-  AC_REQUIRE([AC_PATH_QT])
-
-  AC_MSG_CHECKING([for Qtopia])
-
-  LIB_QTOPIA="-lqpe"
-  AC_SUBST(LIB_QTOPIA)
-
-  kde_qtopia_dirs="$QPEDIR /opt/Qtopia"
-
-  ac_qtopia_incdir=NO
-
-  AC_ARG_WITH(qtopia-dir,
-              [  --with-qtopia-dir=DIR   where the root of Qtopia is installed ],
-              [  ac_qtopia_incdir="$withval"/include] ) 
-  
-  qtopia_incdirs=""
-  for dir in $kde_qtopia_dirs; do
-    qtopia_incdirs="$qtopia_incdirs $dir/include"
-  done
-
-  if test ! "$ac_qtopia_incdir" = "NO"; then
-    qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs"
-  fi
-
-  qtopia_incdir=""
-  AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir)
-  ac_qtopia_incdir="$qtopia_incdir"
-
-  if test -z "$qtopia_incdir"; then
-    AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.])
-  fi
-
-  qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`;
-  qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`;
-  qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`;
-
-  qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat"
-  qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat"
-  if test "$qtopia_ver" -lt "$qtopia_minver"; then
-    AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr
-is required.])
-  fi
-
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-
-  ac_cxxflags_safe="$CXXFLAGS"
-  ac_ldflags_safe="$LDFLAGS"
-  ac_libs_safe="$LIBS"
-
-  CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes"
-  LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
-  LIBS="$LIBS $LIB_QTOPIA $LIBQT"
-
-  cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <qpe/qpeapplication.h>
-#include <qpe/version.h>
-
-int main( int argc, char **argv )
-{
-    QPEApplication app( argc, argv );
-    return 0;
-}
-EOF
-
-  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-    rm -f conftest*
-  else
-    rm -f conftest*
-    AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at
-the end of config.log])
-  fi
-
-  CXXFLAGS="$ac_cxxflags_safe"
-  LDFLAGS="$ac_ldflags_safe"
-  LIBS="$ac_libs_safe"
-
-  AC_LANG_RESTORE
-
-  QTOPIA_INCLUDES="-I$qtopia_incdir"
-  AC_SUBST(QTOPIA_INCLUDES)
-
-  AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir])
-])
-
-
-AC_DEFUN(KDE_INIT_DOXYGEN,
-[
-AC_MSG_CHECKING([for Qt docs])
-kde_qtdir=
-if test "${with_qt_dir+set}" = set; then
-  kde_qtdir="$with_qt_dir"
-fi
-
-AC_FIND_FILE(ntqsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR)
-AC_MSG_RESULT($QTDOCDIR)
-
-AC_SUBST(QTDOCDIR)
-
-KDE_FIND_PATH(dot, DOT, [], [])
-if test -n "$DOT"; then
-  KDE_HAVE_DOT="YES"
-else
-  KDE_HAVE_DOT="NO"
-fi
-AC_SUBST(KDE_HAVE_DOT)
-KDE_FIND_PATH(doxygen, DOXYGEN, [], [])
-AC_SUBST(DOXYGEN)
-
-DOXYGEN_PROJECT_NAME="$1"
-DOXYGEN_PROJECT_NUMBER="$2"
-AC_SUBST(DOXYGEN_PROJECT_NAME)
-AC_SUBST(DOXYGEN_PROJECT_NUMBER)
-
-KDE_HAS_DOXYGEN=no
-if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/ntqsql.html; then
-  KDE_HAS_DOXYGEN=yes
-fi
-AC_SUBST(KDE_HAS_DOXYGEN)
-
-])
-
-
-AC_DEFUN(AC_FIND_BZIP2,
-[
-AC_MSG_CHECKING([for bzDecompress in libbz2])
-AC_CACHE_VAL(ac_cv_lib_bzip2,
-[
-AC_LANG_C
-kde_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(dnl
-[
-#define BZ_NO_STDIO
-#include<bzlib.h>
-],
-            [ bz_stream s; (void) bzDecompress(&s); ],
-            eval "ac_cv_lib_bzip2='-lbz2'",
-            eval "ac_cv_lib_bzip2=no")
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-AC_MSG_RESULT($ac_cv_lib_bzip2)
-
-if test ! "$ac_cv_lib_bzip2" = no; then
-  BZIP2DIR=bzip2
-
-  LIBBZ2="$ac_cv_lib_bzip2"
-  AC_SUBST(LIBBZ2)
-
-else
-
-   cxx_shared_flag=
-   ld_shared_flag=
-   KDE_CHECK_COMPILER_FLAG(shared, [
-	ld_shared_flag="-shared"
-   ])
-   KDE_CHECK_COMPILER_FLAG(fPIC, [
-        cxx_shared_flag="-fPIC"
-   ])
-
-   AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2])
-   AC_CACHE_VAL(ac_cv_lib_bzip2_prefix,
-   [
-   AC_LANG_CPLUSPLUS
-   kde_save_LIBS="$LIBS"
-   LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET"
-   kde_save_CXXFLAGS="$CXXFLAGS"
-   CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES"
-
-   AC_TRY_LINK(dnl
-   [
-   #define BZ_NO_STDIO
-   #include<bzlib.h>
-   ],
-               [ bz_stream s; (void) BZ2_bzDecompress(&s); ],
-               eval "ac_cv_lib_bzip2_prefix='-lbz2'",
-               eval "ac_cv_lib_bzip2_prefix=no")
-   LIBS="$kde_save_LIBS"
-   CXXFLAGS="$kde_save_CXXFLAGS"
-   ])dnl
-
-   AC_MSG_RESULT($ac_cv_lib_bzip2_prefix)
-   
-
-
-   if test ! "$ac_cv_lib_bzip2_prefix" = no; then
-     BZIP2DIR=bzip2
-    
-     LIBBZ2="$ac_cv_lib_bzip2_prefix"
-     AC_SUBST(LIBBZ2)
-
-     AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix])
-   dnl else, we just ignore this
-   fi
-
-fi
-AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR")
-])
-
-dnl ------------------------------------------------------------------------
-dnl Try to find the SSL headers and libraries.
-dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed)
-dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(KDE_CHECK_SSL,
-[
-LIBSSL="-lssl -lcrypto"
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-ac_ssl_includes=NO ac_ssl_libraries=NO
-ssl_libraries=""
-ssl_includes=""
-AC_ARG_WITH(ssl-dir,
-    [  --with-ssl-dir=DIR      where the root of OpenSSL is installed],
-    [  ac_ssl_includes="$withval"/include
-       ac_ssl_libraries="$withval"/lib$tdelibsuff
-    ])
-
-want_ssl=yes
-AC_ARG_WITH(ssl,
-    [  --without-ssl           disable SSL checks],
-    [want_ssl=$withval])
-
-if test $want_ssl = yes; then
-
-AC_MSG_CHECKING(for OpenSSL)
-
-AC_CACHE_VAL(ac_cv_have_ssl,
-[#try to guess OpenSSL locations
-  
-  ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes"
-  ssl_incdirs="$ac_ssl_includes $ssl_incdirs"
-  AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir)
-  ac_ssl_includes="$ssl_incdir"
-
-  ssl_libdirs="/usr/lib$tdelibsuff /usr/local/lib$tdelibsuff /usr/ssl/lib$tdelibsuff /usr/local/ssl/lib$tdelibsuff $libdir $prefix/lib$tdelibsuff $exec_prefix/lib$tdelibsuff $kde_extra_libs"
-  if test ! "$ac_ssl_libraries" = "NO"; then
-    ssl_libdirs="$ac_ssl_libraries $ssl_libdirs"
-  fi
-
-  test=NONE
-  ssl_libdir=NONE
-  for dir in $ssl_libdirs; do
-    try="ls -1 $dir/libssl*"
-    if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
-  done
-
-  ac_ssl_libraries="$ssl_libdir"
-
-  AC_LANG_SAVE
-  AC_LANG_C
-
-  ac_cflags_safe="$CFLAGS"
-  ac_ldflags_safe="$LDFLAGS"
-  ac_libs_safe="$LIBS"
-
-  CFLAGS="$CFLAGS -I$ssl_incdir $all_includes"
-  LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries"
-  LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref"
-
-  AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();,
-  ac_ssl_rsaref="yes"
-  ,
-  ac_ssl_rsaref="no"
-  )
-
-  CFLAGS="$ac_cflags_safe"
-  LDFLAGS="$ac_ldflags_safe"
-  LIBS="$ac_libs_safe"
-
-  AC_LANG_RESTORE
-
-  if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then
-    have_ssl=no
-  else
-    have_ssl=yes;
-  fi
-
-  ])
-
-  eval "$ac_cv_have_ssl"
-
-  AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes])
-
-  AC_MSG_CHECKING([whether OpenSSL uses rsaref])
-  AC_MSG_RESULT($ac_ssl_rsaref)
-
-  AC_MSG_CHECKING([for easter eggs])
-  AC_MSG_RESULT([none found])
-
-else
-  have_ssl=no
-fi
-
-if test "$have_ssl" = yes; then
-  AC_MSG_CHECKING(for OpenSSL version)
-  dnl Check for SSL version
-  AC_CACHE_VAL(ac_cv_ssl_version,
-  [
-    AC_LANG_SAVE
-    AC_LANG_C 
-
-    cat >conftest.$ac_ext <<EOF
-#include <openssl/opensslv.h>
-#include <stdio.h>
-    int main() {
- 
-#ifndef OPENSSL_VERSION_NUMBER
-      printf("ssl_version=\\"error\\"\n");
-#else
-      if (OPENSSL_VERSION_NUMBER < 0x00906000)
-        printf("ssl_version=\\"old\\"\n");
-      else
-        printf("ssl_version=\\"ok\\"\n");
-#endif
-     return (0);
-    }
-EOF
-
-    ac_compile='${CC-gcc} $CFLAGS -I$ac_ssl_includes conftest.$ac_ext -o conftest'
-    if AC_TRY_EVAL(ac_compile); then 
-
-      if eval `./conftest 2>&5`; then
-        if test $ssl_version = error; then
-          AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !])
-        else
-          if test $ssl_version = old; then
-            AC_MSG_WARN([OpenSSL version too old. Upgrade to 1.0.6 at least, see http://www.openssl.org. SSL support disabled.])
-            have_ssl=no
-          fi
-        fi
-        ac_cv_ssl_version="ssl_version=$ssl_version"
-      else
-        AC_MSG_ERROR([Your system couldn't run a small SSL test program.
-        Check config.log, and if you can't figure it out, send a mail to 
-        David Faure <faure@kde.org>, attaching your config.log])
-      fi
-
-    else
-      AC_MSG_ERROR([Your system couldn't link a small SSL test program.
-      Check config.log, and if you can't figure it out, send a mail to 
-      David Faure <faure@kde.org>, attaching your config.log])
-    fi 
-
-    AC_LANG_RESTORE
-
-  ])
-
-  eval "$ac_cv_ssl_version"
-  AC_MSG_RESULT($ssl_version)
-fi
-
-if test "$have_ssl" != yes; then
-  LIBSSL="";
-else
-  AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL])
-  ac_cv_have_ssl="have_ssl=yes \
-    ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref"
-  
-  
-  ssl_libraries="$ac_ssl_libraries"
-  ssl_includes="$ac_ssl_includes"
-
-  if test "$ac_ssl_rsaref" = yes; then
-    LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" 
-  fi
-
-  if test $ssl_version = "old"; then
-    AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 1.0.6])
-  fi
-fi
-
-if test "$ssl_includes" = "/usr/include" || test  "$ssl_includes" = "/usr/local/include" || test -z "$ssl_includes"; then
- SSL_INCLUDES="";
-else
- SSL_INCLUDES="-I$ssl_includes"
-fi
-
-if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries"; then
- SSL_LDFLAGS=""
-else
- SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries"
-fi
-
-AC_SUBST(SSL_INCLUDES)
-AC_SUBST(SSL_LDFLAGS)
-AC_SUBST(LIBSSL)
-])
-
-AC_DEFUN(KDE_CHECK_STRLCPY,
-[
-  AC_REQUIRE([AC_CHECK_STRLCAT])
-  AC_REQUIRE([AC_CHECK_STRLCPY])
-  AC_CHECK_SIZEOF(size_t)
-  AC_CHECK_SIZEOF(unsigned long)
-
-  AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long])
-  AC_TRY_COMPILE(,[
-    #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG
-       choke me
-    #endif
-    ],AC_MSG_RESULT([yes]),[
-      AC_MSG_RESULT(no)
-      AC_MSG_ERROR([
-       Apparently on your system our assumption sizeof size_t == sizeof unsigned long 
-       does not apply. Please mail kde-devel@kde.org with a description of your system!
-      ])
-  ])
-])
-
-AC_DEFUN(KDE_CHECK_BINUTILS,
-[
-  AC_MSG_CHECKING([if ld supports unversioned version maps])
-
-  kde_save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map"
-  echo "{ local: extern \"C++\" { foo }; };" > conftest.map
-  AC_TRY_LINK([int foo;],
-[
-#ifdef __INTEL_COMPILER
-icc apparently does not support libtools version-info and version-script
-at the same time. Dunno where the bug is, but until somebody figured out,
-better disable the optional version scripts.
-#endif
-
-  foo = 42;
-], kde_supports_versionmaps=yes, kde_supports_versionmaps=no)
-  LDFLAGS="$kde_save_LDFLAGS"
-  rm -f conftest.map
-  AM_CONDITIONAL(include_VERSION_SCRIPT, 
-    [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"])
-
-  AC_MSG_RESULT($kde_supports_versionmaps)
-])
-
-AC_DEFUN([AM_PROG_OBJC],[
-AC_CHECK_PROGS(OBJC, gcc, gcc)
-test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH])
-if test "x${OBJCFLAGS-unset}" = xunset; then
-   OBJCFLAGS="-g -O2"
-fi
-AC_SUBST(OBJCFLAGS)
-_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)])
-])
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-## Copyright 1996, 1997, 1998, 1999, 2000, 2001
-## Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 47 AC_PROG_LIBTOOL
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="[$]2"
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[ifdef([AC_DIVERSION_NOTICE],
-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-[$]*
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-AC_DIVERT_POP
-])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-linux*)
-  # Test if the compiler is 64bit
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *"ELF 32"*)
-      LINUX_64_MODE="32"
-      ;;
-    *"ELF 64"*)
-      LINUX_64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-  
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   save_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS $3"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-   CFLAGS="$save_CFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
-else
-    ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
-else
-    ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  testring="ABCD"
-
-  case $host_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-	       = "XX$testring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$testring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      testring=$testring$testring
-    done
-    testring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}]
-EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_unknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# -------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   ifelse([$1],[],[save_CFLAGS="$CFLAGS"
-		   CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"],
-	  [$1],[CXX],[save_CXXFLAGS="$CXXFLAGS"
-		   CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"],
-	  [$1],[GCJ],[save_GCJFLAGS="$GCJFLAGS"
-		   GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
-
-   if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s out/conftest.err; then
-       # Append any errors to the config.log.
-       cat out/conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   ifelse([$1],[],[CFLAGS="$save_CFLAGS"],
-	  [$1],[CXX],[CXXFLAGS="$save_CXXFLAGS"],
-	  [$1],[GCJ],[GCJFLAGS="$save_GCJFLAGS"])
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var $1)"; then
-
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-  AC_MSG_RESULT([no])
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"`
-    if echo "$sys_lib_search_path_spec" | [egrep ';[C-Z]:/' >/dev/null]; then
-      # It is most probably a Windows format PATH printed by
-      # mingw gcc, but we are running on Cygwin. Gcc prints its search
-      # path with ; separators, and with drive letters. We can handle the
-      # drive letters (cygwin fileutils understands them), so leave them,
-      # especially as we might pass files found there to a mingw objdump,
-      # which wouldn't understand a cygwinified path. Ahh.
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'`
-    else
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed  -e "s/$PATH_SEPARATOR/ /g"`
-    fi
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  *) # from 3.2 on
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test "$host_cpu" = ia64; then
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    soname_spec='${libname}${release}.so$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-  else
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-    soname_spec='${libname}${release}.sl$major'
-  fi
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)          version_type=irix ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  libsuff=
-  if test "x$LINUX_64_MODE" = x64; then
-    # Some platforms are per default 64-bit, so there's no /lib64
-    if test -d /lib64; then
-      libsuff=64
-    fi
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags=TAGS],
-	[include additional configurations @<:@CXX,GCJ@:>@])],
-    [tagnames="$withval"],
-    [tagnames="CXX,GCJ"
-    case $host_os in
-      mingw*|cygwin*) tagnames="$tagnames,RC" ;;
-    esac])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	AC_LIBTOOL_LANG_CXX_CONFIG
-	;;
-
-      GCJ)
-	AC_LIBTOOL_LANG_GCJ_CONFIG
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      available_tags="$available_tags $tagname"
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-#- set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* | pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[[012]])
-    lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  if test "$host_cpu" = ia64; then
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-  else
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  fi
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-  irix5* | nonstopux*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh* | x86_64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  # the debian people say, arm and glibc 2.3.1 works for them with pass_all
-  arm* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-nto-qnx)
-  lt_cv_deplibs_check_method=unknown
-  ;;
-
-openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-  else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  esac
-  ;;
-
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ("$tmp_nm" -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ("$tmp_nm" -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided and an installed libltdl is not found, it is
-# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-# quotes!).  If your package is not flat and you're not using automake,
-# define top_builddir and top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-	      [ifdef([AC_PROVIDE_$1],
-		     [$2], [$3])])])
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-])# _LT_AC_LANG_CXX
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# --------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([AC_PROG_RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-#
-# Check for any special shared library compilation flags.
-#
-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-    ;;
-  esac
-fi
-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ 	]]" >/dev/null; then :
-  else
-    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-# Report which librarie types wil actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C test sources.
-ac_ext=cc
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int char *[]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${CXX-"c++"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if eval "`$CC -print-prog-name=ld` --version 2>&1" | \
-      egrep 'GNU ld' > /dev/null; then
-    with_gnu_ld=yes
-
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	egrep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      # KDE requires run time linking.  Make it the default.
-      aix_use_runtimelinking=yes
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-      esac
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='-qmkshrobj ${wl}-G'
-	else
-	  shared_flag='-qmkshrobj'
-	fi
-      fi
-    fi
-
-    # Let the compiler handle the export list.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	_LT_AC_TAGVAR(always_export_symbols, $1)=yes
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds it's shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  dgux*)
-    case $cc_basename in
-      ec++)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[12]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux*)
-    if test $with_gnu_ld = no; then
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      else
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      fi
-    fi
-    if test "$host_cpu" = ia64; then
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    else
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    fi
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					    # but as the default
-					    # location of the library.
-
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      aCC)
-	case $host_os in
-	hpux9*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	  ;;
-	*)
-	  if test "$host_cpu" = ia64; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  fi
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_os in
-	    hpux9*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	      ;;
-	    *)
-	      if test "$host_cpu" = ia64; then
-		_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	      else
-		_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      fi
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc)
-	# Intel C++
-	with_gnu_ld=yes
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      cxx)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    # NetBSD uses g++ - do we need to do anything?
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sco*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC)
-	# Sun C++ 4.2, 5.x and Centerline C++
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | egrep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-# Figure out "hidden" C++ library dependencies from verbose
-# compiler output whening linking a shared library.
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-
-
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext|*.$libext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out
-else
-  echo "libtool.m4: error: problem compiling C++ test program"
-fi
-
-$rm -f confest.$objext
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ;;
-esac
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for C test sources.
-ac_ext=java
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
-
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "$cfgfile"
-    # This is a source program that is used to create dlls on Windows
-    # Don't remove nor modify the starting and closing comments
-    _LT_AC_FILE_LTDLL_C
-    # This is a source program that is used to create import libraries
-    # on Windows for dlls which lack them. Don't remove nor modify the
-    # starting and closing comments
-    _LT_AC_FILE_IMPGEN_C
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-solaris* | sysv5*)
-  symcode='[[BDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[[ABCDGISTW]]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    cygwin* | mingw* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      fi
-      ;;
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix4* | aix5*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-      dgux*)
-	case $cc_basename in
-	  ec++)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux*)
-	case $cc_basename in
-	  KCC)
-	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  icpc)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  cxx)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC)
-	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx)
-	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      sco*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC)
-	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc)
-	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC)
-	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      unixware*)
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      fi
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-      fi
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    linux*)
-      if test "$CC" = "icc"; then
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-      fi
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      if test "x$host_vendor" = xsni; then
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      fi
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case "$host_os" in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC"
-    ;;
-esac
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix4* | aix5*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  cygwin* | mingw* | pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-],[
-  runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an egrep regular expression of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-
-      extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-	sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-	test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-	if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-	else $CC -o impgen impgen.c ; fi)~
-	$output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-      _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-      # cygwin and mingw dlls have different entry points and sets of symbols
-      # to exclude.
-      # FIXME: what about values for MSVC?
-      dll_entry=__cygwin_dll_entry@12
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-      case $host_os in
-      mingw*)
-	# mingw values
-	dll_entry=_DllMainCRTStartup@12
-	dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-	;;
-      esac
-
-      # mingw and cygwin differ, and it's simplest to just exclude the union
-      # of the two symbol sets.
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-      # recent cygwin and mingw systems supply a stub DllMain which the user
-      # can override, but on older systems we have to supply one (in ltdll.c)
-      if test "x$lt_cv_need_dllmain" = "xyes"; then
-	ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-	ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-  	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-      else
-	ltdll_obj=
-	ltdll_cmds=
-      fi
-
-      # Extract the symbol export list from an `--export-all' def file,
-      # then regenerate the def file from the symbol export list, so that
-      # the compiled dll only exports the symbol export list.
-      # Be careful not to strip the DATA tag left by newer dlltools.
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"'
-	$DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-	sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is.
-      # If DATA tags from a recent dlltool are present, honour them!
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname-def;
-	else
-	  echo EXPORTS > $output_objdir/$soname-def;
-	  _lt_hint=1;
-	  cat $export_symbols | while read symbol; do
-	   set dummy \$symbol;
-	   case \[$]# in
-	     2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	     *) echo "   \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-	   esac;
-	   _lt_hint=`expr 1 + \$_lt_hint`;
-	  done;
-	fi~
-	'"$ltdll_cmds"'
-	$CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-	$CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-	$CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris* | sysv5*)
-      if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-      runpath_var=LD_RUN_PATH
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-      case $host_os in
-      cygwin* | mingw* | pw32*)
-	# dlltool doesn't understand --whole-archive et. al.
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-	;;
-      *)
-	# ancient GNU ld didn't support --whole-archive et. al.
-	if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-	fi
-	;;
-      esac
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	fi
-
-	# KDE requires run time linking.  Make it the default.
-	aix_use_runtimelinking=yes
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	esac
-	shared_flag='-shared'
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-  	if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='-qmkshrobj ${wl}-G'
-	  else
-	    shared_flag='-qmkshrobj'
-  	fi
-	fi
-      fi
-
-      # Let the compiler handle the export list.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    bsdi4*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      ;;
-
-    darwin* | rhapsody*)
-      case "$host_os" in
-      rhapsody* | darwin1.[[012]])
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-	;;
-      esac
-
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-      # We need to add '_' to the symbols in $export_symbols first
-      #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-      ;;
-
-    dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      if test "$GCC" = yes; then
-	case $host_os in
-	  hpux9*)
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    else
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	    fi
-	    ;;
-	esac
-      else
-	case $host_os in
-	  hpux9*)
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-	    else
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-	    fi
-	    ;;
-	esac
-      fi
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=no
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      else
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      fi
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    openbsd*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	   ;;
-	 *)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    sco3.2v5*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-      esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      if test "x$host_vendor" = xsni; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-      fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4.2uw2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
-
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv5*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-#
-# Do we need to explicitly link libc?
-#
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $_LT_AC_TAGVAR(archive_cmds, $1) in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-    $rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-      if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-      then
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      else
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-      fi
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi
-    $rm conftest*
-    AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-    ;;
-  esac
-fi
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_FILE_IMPGEN_C
-# --------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_IMPGEN_C], [
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
-])# _LT_AC_FILE_IMPGEN_C
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-############################################################
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-############################################################
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-
-  # Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
-  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=$TMPDIR/sed$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-   { (exit 1); exit 1; }
-}
-  _max=0
-  _count=0
-  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
-  # along with /bin/sed that truncates output.
-  for _sed in $_sed_list /usr/xpg4/bin/sed; do
-    test ! -f ${_sed} && break
-    cat /dev/null > "$tmp/sed.in"
-    _count=0
-    echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in"
-    # Check for GNU sed and select it if it is found.
-    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
-      lt_cv_path_SED=${_sed}
-      break;
-    fi
-    while true; do
-      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
-      mv "$tmp/sed.tmp" "$tmp/sed.in"
-      cp "$tmp/sed.in" "$tmp/sed.nl"
-      echo >>"$tmp/sed.nl"
-      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
-      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
-      # 10000 chars as input seems more than enough
-      test $_count -gt 10 && break
-      _count=`expr $_count + 1`
-      if test $_count -gt $_max; then
-        _max=$_count
-        lt_cv_path_SED=$_sed
-      fi
-    done
-  done
-  rm -rf "$tmp"
-])
-AC_MSG_RESULT([$SED])
-])
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index 695df37..0000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,11703 +0,0 @@
-# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*-
-
-# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu)
-dnl              (C) 1997,98,99 Stephan Kulow (coolo@kde.org)
-
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
-
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
-
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-dnl    Boston, MA 02111-1307, USA.
-
-dnl IMPORTANT NOTE:
-dnl Please do not modify this file unless you expect your modifications to be
-dnl carried into every other module in the repository. 
-dnl
-dnl Single-module modifications are best placed in configure.in for tdelibs
-dnl and tdebase or configure.in.in if present.
-
-# KDE_PATH_X_DIRECT
-dnl Internal subroutine of AC_PATH_X.
-dnl Set ac_x_includes and/or ac_x_libraries.
-AC_DEFUN(KDE_PATH_X_DIRECT,
-[
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-if test "$ac_x_includes" = NO; then
-  # Guess where to find include files, by looking for this one X11 .h file.
-  test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
-  # First, try using that file with no special directory specified.
-AC_TRY_CPP([#include <$x_direct_test_include>],
-[# We can compile using X headers with no special include directory.
-ac_x_includes=],
-[# Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-  for ac_dir in               \
-    /usr/X11/include          \
-    /usr/X11R6/include        \
-    /usr/X11R5/include        \
-    /usr/X11R4/include        \
-                              \
-    /usr/include/X11          \
-    /usr/include/X11R6        \
-    /usr/include/X11R5        \
-    /usr/include/X11R4        \
-                              \
-    /usr/local/X11/include    \
-    /usr/local/X11R6/include  \
-    /usr/local/X11R5/include  \
-    /usr/local/X11R4/include  \
-                              \
-    /usr/local/include/X11    \
-    /usr/local/include/X11R6  \
-    /usr/local/include/X11R5  \
-    /usr/local/include/X11R4  \
-                              \
-    /usr/X386/include         \
-    /usr/x386/include         \
-    /usr/XFree86/include/X11  \
-                              \
-    /usr/include              \
-    /usr/local/include        \
-    /usr/unsupported/include  \
-    /usr/athena/include       \
-    /usr/local/x11r5/include  \
-    /usr/lpp/Xamples/include  \
-                              \
-    /usr/openwin/include      \
-    /usr/openwin/share/include \
-    ; \
-  do
-    if test -r "$ac_dir/$x_direct_test_include"; then
-      ac_x_includes=$ac_dir
-      break
-    fi
-  done])
-fi # $ac_x_includes = NO
-
-if test "$ac_x_libraries" = NO; then
-  # Check for the libraries.
-
-  test -z "$x_direct_test_library" && x_direct_test_library=Xt
-  test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
-  # See if we find them without any special options.
-  # Don't add to $LIBS permanently.
-  ac_save_LIBS="$LIBS"
-  LIBS="-l$x_direct_test_library $LIBS"
-AC_TRY_LINK(, [${x_direct_test_function}()],
-[LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=],
-[LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \
-    /usr/X11/lib${tdelibsuff}           \
-    /usr/X11R6/lib${tdelibsuff}         \
-    /usr/X11R5/lib${tdelibsuff}         \
-    /usr/X11R4/lib${tdelibsuff}         \
-                                        \
-    /usr/lib${tdelibsuff}/X11           \
-    /usr/lib${tdelibsuff}/X11R6         \
-    /usr/lib${tdelibsuff}/X11R5         \
-    /usr/lib${tdelibsuff}/X11R4         \
-                                        \
-    /usr/local/X11/lib${tdelibsuff}     \
-    /usr/local/X11R6/lib${tdelibsuff}   \
-    /usr/local/X11R5/lib${tdelibsuff}   \
-    /usr/local/X11R4/lib${tdelibsuff}   \
-                                        \
-    /usr/local/lib${tdelibsuff}/X11     \
-    /usr/local/lib${tdelibsuff}/X11R6   \
-    /usr/local/lib${tdelibsuff}/X11R5   \
-    /usr/local/lib${tdelibsuff}/X11R4   \
-                                        \
-    /usr/X386/lib${tdelibsuff}          \
-    /usr/x386/lib${tdelibsuff}          \
-    /usr/XFree86/lib${tdelibsuff}/X11   \
-                                        \
-    /usr/lib${tdelibsuff}               \
-    /usr/local/lib${tdelibsuff}         \
-    /usr/unsupported/lib${tdelibsuff}   \
-    /usr/athena/lib${tdelibsuff}        \
-    /usr/local/x11r5/lib${tdelibsuff}   \
-    /usr/lpp/Xamples/lib${tdelibsuff}   \
-    /lib/usr/lib${tdelibsuff}/X11       \
-                                        \
-    /usr/openwin/lib${tdelibsuff}       \
-    /usr/openwin/share/lib${tdelibsuff} \
-    ; \
-do
-dnl Don't even attempt the hair of trying to link an X program!
-  for ac_extension in a so sl; do
-    if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
-      ac_x_libraries=$ac_dir
-      break 2
-    fi
-  done
-done])
-fi # $ac_x_libraries = NO
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Find a file (or one of more files in a list of dirs)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_FIND_FILE,
-[
-$3=NO
-for i in $2;
-do
-  for j in $1;
-  do
-    echo "configure: __oline__: $i/$j" >&AC_FD_CC
-    if test -r "$i/$j"; then
-      echo "taking that" >&AC_FD_CC
-      $3=$i
-      break 2
-    fi
-  done
-done
-])
-
-dnl KDE_FIND_PATH(programm-name, variable-name, list of directories,
-dnl	if-not-found, test-parameter)
-AC_DEFUN(KDE_FIND_PATH,
-[
-   AC_MSG_CHECKING([for $1])
-   if test -n "$$2"; then
-        kde_cv_path="$$2";
-   else
-        kde_cache=`echo $1 | sed 'y%./+-%__p_%'`
-
-        AC_CACHE_VAL(kde_cv_path_$kde_cache,
-        [
-        kde_cv_path="NONE"
-	dirs="$3"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/$1"; then
-	    if test -n "$5"
-	    then
-              evalstr="$dir/$1 $5 2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/$1"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/$1"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-        ])
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      AC_MSG_RESULT(not found)
-      $4
-   else
-      AC_MSG_RESULT($kde_cv_path)
-      $2=$kde_cv_path
-
-   fi
-])
-
-AC_DEFUN(KDE_MOC_ERROR_MESSAGE,
-[
-    AC_MSG_ERROR([No Qt meta object compiler (moc) found!
-Please check whether you installed Qt correctly.
-You need to have a running moc binary.
-configure tried to run $ac_cv_path_moc and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable MOC to the right one before running
-configure.
-])
-])
-
-AC_DEFUN(KDE_UIC_ERROR_MESSAGE,
-[
-    AC_MSG_WARN([No Qt ui compiler (uic) found!
-Please check whether you installed Qt correctly.
-You need to have a running uic binary.
-configure tried to run $ac_cv_path_uic and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable UIC to the right one before running
-configure.
-])
-])
-
-
-AC_DEFUN(KDE_CHECK_UIC_FLAG,
-[
-    AC_MSG_CHECKING([whether uic supports -$1 ])
-    kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'`
-    AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache,
-    [
-        cat >conftest.ui <<EOT
-        <!DOCTYPE UI><UI version="3" stdsetdef="1"></UI>
-EOT
-        ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null"
-        if AC_TRY_EVAL(ac_uic_testrun); then
-            eval "kde_cv_prog_uic_$kde_cache=yes"
-        else
-            eval "kde_cv_prog_uic_$kde_cache=no"
-        fi
-        rm -f conftest*
-    ])
-
-    if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then
-        AC_MSG_RESULT([yes])
-        :
-        $3
-    else
-        AC_MSG_RESULT([no])
-        :
-        $4
-    fi
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Find the meta object compiler and the ui compiler in the PATH,
-dnl in $QTDIR/bin, and some more usual places
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_PATH_QT_MOC_UIC,
-[
-   qt_bindirs=""
-   for dir in $kde_qt_dirs; do
-      qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
-   done
-   qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
-   if test ! "$ac_qt_bindir" = "NO"; then
-      qt_bindirs="$ac_qt_bindir $qt_bindirs"
-   fi
-
-   KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE])
-   if test -z "$UIC_NOT_NEEDED"; then
-     KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""])
-     if test -z "$UIC_PATH" ; then
-       KDE_UIC_ERROR_MESSAGE
-       exit 1
-     elif test $kde_qtver = 3; then
-       KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no)
-       KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no)
-
-       UIC=$UIC_PATH
-       if test x$ac_uic_supports_libpath = xyes; then
-           UIC="$UIC -L \$(kde_widgetdir)"
-       fi
-       if test x$ac_uic_supports_nounload = xyes; then
-           UIC="$UIC -nounload"
-       fi
-     fi
-   else
-     UIC="echo uic not available: "
-   fi
-
-   AC_SUBST(MOC)
-   AC_SUBST(UIC)
-
-   UIC_TR="i18n"
-   if test $kde_qtver = 3; then
-     UIC_TR="tr2i18n"
-   fi
-
-   AC_SUBST(UIC_TR)
-])
-
-AC_DEFUN(KDE_1_CHECK_PATHS,
-[
-  KDE_1_CHECK_PATH_HEADERS
-
-  KDE_TEST_RPATH=
-
-  if test -n "$USE_RPATH"; then
-
-     if test -n "$kde_libraries"; then
-       KDE_TEST_RPATH="-R $kde_libraries"
-     fi
-
-     if test -n "$qt_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
-     fi
-
-     if test -n "$x_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
-     fi
-
-     KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
-  fi
-
-AC_MSG_CHECKING([for KDE libraries installed])
-ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5'
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  AC_MSG_RESULT(yes)
-else
-  AC_MSG_ERROR([your system fails at linking a small KDE application!
-Check, if your compiler is installed correctly and if you have used the
-same compiler to compile Qt and tdelibs as you did use now.
-For more details about this problem, look at the end of config.log.])
-fi
-
-if eval `TDEDIR= ./conftest 2>&5`; then
-  kde_result=done
-else
-  kde_result=problems
-fi
-
-TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
-kde_have_all_paths=yes
-
-KDE_SET_PATHS($kde_result)
-
-])
-
-AC_DEFUN(KDE_SET_PATHS,
-[
-  kde_cv_all_paths="kde_have_all_paths=\"yes\" \
-	kde_htmldir=\"$kde_htmldir\" \
-	kde_appsdir=\"$kde_appsdir\" \
-	kde_icondir=\"$kde_icondir\" \
-	kde_sounddir=\"$kde_sounddir\" \
-	kde_datadir=\"$kde_datadir\" \
-	kde_locale=\"$kde_locale\" \
-	kde_cgidir=\"$kde_cgidir\" \
-	kde_confdir=\"$kde_confdir\" \
-	kde_mimedir=\"$kde_mimedir\" \
-	kde_toolbardir=\"$kde_toolbardir\" \
-	kde_wallpaperdir=\"$kde_wallpaperdir\" \
-	kde_templatesdir=\"$kde_templatesdir\" \
-	kde_bindir=\"$kde_bindir\" \
-	kde_servicesdir=\"$kde_servicesdir\" \
-	kde_servicetypesdir=\"$kde_servicetypesdir\" \
-	kde_moduledir=\"$kde_moduledir\" \
-	kde_styledir=\"$kde_styledir\" \
-	kde_widgetdir=\"$kde_widgetdir\" \
-	xdg_appsdir=\"$xdg_appsdir\" \
-	xdg_directorydir=\"$xdg_directorydir\" \
-	kde_result=$1"
-])
-
-AC_DEFUN(KDE_SET_DEFAULT_PATHS,
-[
-if test "$1" = "default"; then
-
-  if test -z "$kde_htmldir"; then
-    kde_htmldir='\${prefix}/share/doc/HTML'
-  fi
-  if test -z "$kde_appsdir"; then
-    kde_appsdir='\${prefix}/share/applnk'
-  fi
-  if test -z "$kde_icondir"; then
-    kde_icondir='\${prefix}/share/icons'
-  fi
-  if test -z "$kde_sounddir"; then
-    kde_sounddir='\${prefix}/share/sounds'
-  fi
-  if test -z "$kde_datadir"; then
-    kde_datadir='\${prefix}/share/apps'
-  fi
-  if test -z "$kde_locale"; then
-    kde_locale='\${prefix}/share/locale'
-  fi
-  if test -z "$kde_cgidir"; then
-    kde_cgidir='\${exec_prefix}/cgi-bin'
-  fi
-  if test -z "$kde_confdir"; then
-    kde_confdir='\${prefix}/share/config'
-  fi
-  if test -z "$kde_mimedir"; then
-    kde_mimedir='\${prefix}/share/mimelnk'
-  fi
-  if test -z "$kde_toolbardir"; then
-    kde_toolbardir='\${prefix}/share/toolbar'
-  fi
-  if test -z "$kde_wallpaperdir"; then
-    kde_wallpaperdir='\${prefix}/share/wallpapers'
-  fi
-  if test -z "$kde_templatesdir"; then
-    kde_templatesdir='\${prefix}/share/templates'
-  fi
-  if test -z "$kde_bindir"; then
-    kde_bindir='\${exec_prefix}/bin'
-  fi
-  if test -z "$kde_servicesdir"; then
-    kde_servicesdir='\${prefix}/share/services'
-  fi
-  if test -z "$kde_servicetypesdir"; then
-    kde_servicetypesdir='\${prefix}/share/servicetypes'
-  fi
-  if test -z "$kde_moduledir"; then
-    if test "$kde_qtver" = "2"; then
-      kde_moduledir='\${libdir}/kde2'
-    else
-      kde_moduledir='\${libdir}/kde3'
-    fi
-  fi
-  if test -z "$kde_styledir"; then
-    kde_styledir='\${libdir}/kde3/plugins/styles'
-  fi
-  if test -z "$kde_widgetdir"; then
-    kde_widgetdir='\${libdir}/kde3/plugins/designer'
-  fi
-  if test -z "$xdg_appsdir"; then
-    xdg_appsdir='\${datadir}/applications'
-  fi
-  if test -z "$xdg_directorydir"; then
-    xdg_directorydir='\${datadir}/desktop-directories'
-  fi
-
-  KDE_SET_PATHS(defaults)
-
-else
-
-  if test $kde_qtver = 1; then
-     AC_MSG_RESULT([compiling])
-     KDE_1_CHECK_PATHS
-  else
-     AC_MSG_ERROR([path checking not yet supported for KDE 2])
-  fi
-
-fi
-])
-
-AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS,
-[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
-   test -z "$kde_icondir" || test -z "$kde_sounddir" ||
-   test -z "$kde_datadir" || test -z "$kde_locale"  ||
-   test -z "$kde_cgidir"  || test -z "$kde_confdir" ||
-   test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
-   test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
-   test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
-   test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
-   test -z "$kde_styledir" || test -z "kde_widgetdir" ||
-   test -z "$xdg_appsdir" || test -z "xdg_directorydir" 
-   test "x$kde_have_all_paths" != "xyes"; then
-     kde_have_all_paths=no
-  fi
-])
-
-AC_DEFUN(KDE_MISSING_PROG_ERROR,
-[
-    AC_MSG_ERROR([The important program $1 was not found!
-Please check whether you installed KDE correctly.
-])
-])
-
-AC_DEFUN(KDE_MISSING_ARTS_ERROR,
-[
-    AC_MSG_ERROR([The important program $1 was not found!
-Please check whether you installed aRts correctly.
-])
-])
-
-AC_DEFUN(KDE_SUBST_PROGRAMS,
-[
-    AC_ARG_WITH(arts,
-        [  --without-arts        build without aRts [default=detect] ],
-        [build_arts=$withval],
-        [build_arts=yes]
-    )
-    AM_CONDITIONAL(include_ARTS, test "$build_arts" != "no")
-
-        kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin"
-        test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs"
-        if test -n "$TDEDIRS"; then
-           kde_save_IFS=$IFS
-           IFS=:
-           for dir in $TDEDIRS; do
-                kde_default_bindirs="$dir/bin $kde_default_bindirs "
-           done
-           IFS=$kde_save_IFS
-        fi
-        kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
-        KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)])
-        KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)])
-        if test "$build_arts" != "no"; then
-          KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)])
-          KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)])
-        fi
-        KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs])
-	KDE_FIND_PATH(brockenboring, BROCKENBORING, [$kde_default_bindirs])
-	if test -n "$BROCKENBORING"; then
-		KDE_FIND_PATH(tdeinit_wrapper, BROCKENBORING, [$kde_default_bindirs])
-	fi
-        KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs])
-
-        if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then  
- 	    kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share"
-            test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs"
-            AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET)
-	    if test "$KDE_XSL_STYLESHEET" = "NO"; then
-		KDE_XSL_STYLESHEET=""
-	    else
-                KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl"
-	    fi
-        fi
-
-        DCOP_DEPENDENCIES='$(DCOPIDL)'
-        AC_SUBST(DCOPIDL)
-        AC_SUBST(DCOPIDL2CPP)
-        AC_SUBST(DCOP_DEPENDENCIES)
-        AC_SUBST(MCOPIDL)
-        AC_SUBST(ARTSCCONFIG)
-        AC_SUBST(KDECONFIG)
-        AC_SUBST(BROCKENBORING)
-	AC_SUBST(MEINPROC)
- 	AC_SUBST(KDE_XSL_STYLESHEET)
-
-        if test -x "$KDECONFIG"; then # it can be "compiled"
-          kde_libs_prefix=`$KDECONFIG --prefix`
-          if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
-               AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs.
-                          This means it has been moved since you installed it.
-                          This won't work. Please recompile tdelibs for the new prefix.
-                          ])
-           fi
-           kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
-        else
-           kde_libs_prefix='$(prefix)'
-           kde_libs_htmldir='$(kde_htmldir)'
-        fi
-        AC_SUBST(kde_libs_prefix)
-        AC_SUBST(kde_libs_htmldir)
-])dnl
-
-AC_DEFUN(AC_CREATE_KFSSTND,
-[
-AC_REQUIRE([AC_CHECK_RPATH])
-
-AC_MSG_CHECKING([for KDE paths])
-kde_result=""
-kde_cached_paths=yes
-AC_CACHE_VAL(kde_cv_all_paths,
-[
-  KDE_SET_DEFAULT_PATHS($1)
-  kde_cached_paths=no
-])
-eval "$kde_cv_all_paths"
-KDE_CHECK_PATHS_FOR_COMPLETENESS
-if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
-  # wrong values were cached, may be, we can set better ones
-  kde_result=
-  kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
-  kde_datadir= kde_locale=  kde_cgidir=  kde_confdir=
-  kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
-  kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
-  kde_have_all_paths=
-  kde_styledir=
-  kde_widgetdir=
-  xdg_appsdir = xdg_directorydir=
-  KDE_SET_DEFAULT_PATHS($1)
-  eval "$kde_cv_all_paths"
-  KDE_CHECK_PATHS_FOR_COMPLETENESS
-  kde_result="$kde_result (cache overridden)"
-fi
-if test "$kde_have_all_paths" = "no"; then
-  AC_MSG_ERROR([configure could not run a little KDE program to test the environment.
-Since it had compiled and linked before, it must be a strange problem on your system.
-Look at config.log for details. If you are not able to fix this, look at
-http://www.kde.org/faq/installation.html or any www.kde.org mirror.
-(If you're using an egcs version on Linux, you may update binutils!)
-])
-else
-  rm -f conftest*
-  AC_MSG_RESULT($kde_result)
-fi
-
-bindir=$kde_bindir
-
-KDE_SUBST_PROGRAMS
-
-])
-
-AC_DEFUN(AC_SUBST_KFSSTND,
-[
-AC_SUBST(kde_htmldir)
-AC_SUBST(kde_appsdir)
-AC_SUBST(kde_icondir)
-AC_SUBST(kde_sounddir)
-AC_SUBST(kde_datadir)
-AC_SUBST(kde_locale)
-AC_SUBST(kde_confdir)
-AC_SUBST(kde_mimedir)
-AC_SUBST(kde_wallpaperdir)
-AC_SUBST(kde_bindir)
-dnl X Desktop Group standards
-AC_SUBST(xdg_appsdir)
-AC_SUBST(xdg_directorydir)
-dnl for KDE 2
-AC_SUBST(kde_templatesdir)
-AC_SUBST(kde_servicesdir)
-AC_SUBST(kde_servicetypesdir)
-AC_SUBST(kde_moduledir)
-AC_SUBST(tdeinitdir, '$(kde_moduledir)')
-AC_SUBST(kde_styledir)
-AC_SUBST(kde_widgetdir)
-if test "$kde_qtver" = 1; then
-  kde_minidir="$kde_icondir/mini"
-else
-# for KDE 1 - this breaks KDE2 apps using minidir, but
-# that's the plan ;-/
-  kde_minidir="/dev/null"
-fi
-dnl AC_SUBST(kde_minidir)
-dnl AC_SUBST(kde_cgidir)
-dnl AC_SUBST(kde_toolbardir)
-])
-
-AC_DEFUN(KDE_MISC_TESTS,
-[
-   AC_LANG_C
-   dnl Checks for libraries.
-   AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD 
-   AC_SUBST(LIBUTIL)
-   AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD
-   AC_SUBST(LIBCOMPAT)
-   kde_have_crypt=
-   AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes],
-      AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [
-        AC_MSG_WARN([you have no crypt in either libcrypt or libc.
-You should install libcrypt from another source or configure with PAM
-support])
-	kde_have_crypt=no
-      ]))
-   AC_SUBST(LIBCRYPT)
-   if test $kde_have_crypt = yes; then
-      AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function])
-   fi
-   AC_CHECK_SOCKLEN_T
-   AC_LANG_C
-   AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"])
-   if test $ac_cv_lib_dnet_dnet_ntoa = no; then
-      AC_CHECK_LIB(dnet_stub, dnet_ntoa,
-        [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"])
-   fi
-   AC_CHECK_FUNC(inet_ntoa)
-   if test $ac_cv_func_inet_ntoa = no; then
-     AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
-   fi
-   AC_CHECK_FUNC(connect)
-   if test $ac_cv_func_connect = no; then
-      AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
-        $X_EXTRA_LIBS)
-   fi
-
-   AC_CHECK_FUNC(remove)
-   if test $ac_cv_func_remove = no; then
-      AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix")
-   fi
-
-   # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
-   AC_CHECK_FUNC(shmat, ,
-     AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"))
-   
-   # darwin needs this to initialize the environment
-   AC_CHECK_HEADERS(crt_externs.h)
-   AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])])
- 
-   # more headers that need to be explicitly included on darwin
-   AC_CHECK_HEADERS(sys/types.h stdint.h)
-
-   # darwin requires a poll emulation library
-   AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll")
-
-   # CoreAudio framework
-   AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [
-     AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API])
-     FRAMEWORK_COREAUDIO="-framework CoreAudio"
-   ])
-
-   AC_CHECK_RES_INIT
-   AC_SUBST(LIB_POLL)
-   AC_SUBST(FRAMEWORK_COREAUDIO)
-   LIBSOCKET="$X_EXTRA_LIBS"
-   AC_SUBST(LIBSOCKET)
-   AC_SUBST(X_EXTRA_LIBS)
-   AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4
-   AC_SUBST(LIBUCB)
-
-   case $host in  dnl this *is* LynxOS specific
-   *-*-lynxos* )
-        AC_MSG_CHECKING([LynxOS header file wrappers])
-        [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"]
-        AC_MSG_RESULT(disabled)
-        AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS
-         ;;
-    esac
-
-   KDE_CHECK_TYPES
-   KDE_CHECK_LIBDL
-   KDE_CHECK_STRLCPY
-   
-AH_VERBATIM(_AIX_STRINGS_H_BZERO,
-[
-/*
- * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
- * that defines bzero.
- */
-
-#if defined(_AIX)
-#include <strings.h>
-#endif
-])
-
-AC_CHECK_FUNCS([vsnprintf snprintf])
-
-AH_VERBATIM(_TRU64,[
-/*
- * On HP-UX, the declaration of vsnprintf() is needed every time !
- */
-
-#if !defined(HAVE_VSNPRINTF) || defined(hpux)
-#if __STDC__
-#include <stdarg.h>
-#include <stdlib.h>
-#else
-#include <varargs.h>
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
-#ifdef __cplusplus
-extern "C"
-#endif
-int snprintf(char *str, size_t n, char const *fmt, ...);
-#endif
-])
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Find the header files and libraries for X-Windows. Extended the
-dnl macro AC_PATH_X
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(K_PATH_X,
-[
-AC_REQUIRE([KDE_MISC_TESTS])dnl
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_ARG_ENABLE(
-  embedded,
-  [  --enable-embedded       link to Qt-embedded, don't use X],
-  kde_use_qt_emb=$enableval,
-  kde_use_qt_emb=no
-)
-
-AC_ARG_ENABLE(
-  qtopia,
-  [  --enable-qtopia         link to Qt-embedded, link to the Qtopia Environment],
-  kde_use_qt_emb_palm=$enableval,
-  kde_use_qt_emb_palm=no
-)
-
-if test "$kde_use_qt_emb" = "no"; then
-
-AC_MSG_CHECKING(for X)
-AC_LANG_SAVE
-AC_LANG_C
-AC_CACHE_VAL(kde_cv_have_x,
-[# One or both of the vars are not set, and there is no cached value.
-if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
-   kde_x_includes=NO
-else
-   kde_x_includes=$x_includes
-fi
-if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
-   kde_x_libraries=NO
-else
-   kde_x_libraries=$x_libraries
-fi
-
-# below we use the standard autoconf calls
-ac_x_libraries=$kde_x_libraries
-ac_x_includes=$kde_x_includes
-
-KDE_PATH_X_DIRECT
-dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries.
-dnl Unfortunately, if compiling with the N32 ABI, this is not the correct
-dnl location. The correct location is /usr/lib32 or an undefined value
-dnl (the linker is smart enough to pick the correct default library).
-dnl Things work just fine if you use just AC_PATH_X_DIRECT.
-dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to
-dnl /usr/openwin/include, which doesn't work. /usr/include does work, so
-dnl x_includes should be left alone.
-case "$host" in
-mips-sgi-irix6*)
-  ;;
-*-*-solaris*)
-  ;;
-*)
-  _AC_PATH_X_XMKMF
-  if test -z "$ac_x_includes"; then
-    ac_x_includes="."
-  fi
-  if test -z "$ac_x_libraries"; then
-    ac_x_libraries="/usr/lib${tdelibsuff}"
-  fi
-esac
-#from now on we use our own again
-
-# when the user already gave --x-includes, we ignore
-# what the standard autoconf macros told us.
-if test "$kde_x_includes" = NO; then
-  kde_x_includes=$ac_x_includes
-fi
-
-# for --x-libraries too
-if test "$kde_x_libraries" = NO; then
-  kde_x_libraries=$ac_x_libraries
-fi
-
-if test "$kde_x_includes" = NO; then
-  AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!])
-fi
-
-if test "$kde_x_libraries" = NO; then
-  AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!])
-fi
-
-# Record where we found X for the cache.
-kde_cv_have_x="have_x=yes \
-         kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
-])dnl
-
-eval "$kde_cv_have_x"
-
-if test "$have_x" != yes; then
-  AC_MSG_RESULT($have_x)
-  no_x=yes
-else
-  AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes])
-fi
-
-if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
-  X_INCLUDES=""
-  x_includes="."; dnl better than nothing :-
- else
-  x_includes=$kde_x_includes
-  X_INCLUDES="-I$x_includes"
-fi
-
-if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
-  X_LDFLAGS=""
-  x_libraries="/usr/lib"; dnl better than nothing :-
- else
-  x_libraries=$kde_x_libraries
-  X_LDFLAGS="-L$x_libraries"
-fi
-all_includes="$X_INCLUDES"
-all_libraries="$X_LDFLAGS"
-
-AC_SUBST(X_INCLUDES)
-AC_SUBST(X_LDFLAGS)
-AC_SUBST(x_libraries)
-AC_SUBST(x_includes)
-
-# Check for libraries that X11R6 Xt/Xaw programs need.
-ac_save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
-# check for ICE first), but we must link in the order -lSM -lICE or
-# we get undefined symbols.  So assume we have SM if we have ICE.
-# These have to be linked with before -lX11, unlike the other
-# libraries we check for below, so use a different variable.
-#  --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
-AC_CHECK_LIB(ICE, IceConnectionNumber,
-  [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS)
-AC_SUBST(LIBSM)
-LDFLAGS="$ac_save_LDFLAGS"
-
-AC_SUBST(X_PRE_LIBS)
-
-LIB_X11='-lX11 $(LIBSOCKET)'
-AC_SUBST(LIB_X11)
-
-AC_MSG_CHECKING(for libXext)
-AC_CACHE_VAL(kde_cv_have_libXext,
-[
-kde_ldflags_safe="$LDFLAGS"
-kde_libs_safe="$LIBS"
-
-LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
-LIBS="-lXext -lX11 $LIBSOCKET"
-
-AC_TRY_LINK([
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-],
-[
-printf("hello Xext\n");
-],
-kde_cv_have_libXext=yes,
-kde_cv_have_libXext=no
-   )
-
-LDFLAGS=$kde_ldflags_safe
-LIBS=$kde_libs_safe
- ])
-
-AC_MSG_RESULT($kde_cv_have_libXext)
-
-if test "$kde_cv_have_libXext" = "no"; then
-  AC_MSG_ERROR([We need a working libXext to proceed. Since configure
-can't find it itself, we stop here assuming that make wouldn't find
-them either.])
-fi
-
-LIB_XEXT="-lXext"
-QTE_NORTTI=""
-
-else
-  dnl We're using QT Embedded
-  CPPFLAGS=-DQWS
-  CXXFLAGS="$CXXFLAGS -fno-rtti"
-  QTE_NORTTI="-fno-rtti -DQWS"
-  X_PRE_LIBS=""
-  LIB_X11=""
-  LIB_XEXT=""
-  LIBSM=""
-  X_INCLUDES=""
-  X_LDFLAGS=""
-  x_includes=""
-  x_libraries=""
-  AC_SUBST(X_PRE_LIBS)
-  AC_SUBST(LIB_X11)
-  AC_SUBST(LIBSM)
-  AC_SUBST(X_INCLUDES)
-  AC_SUBST(X_LDFLAGS)
-  AC_SUBST(x_includes)
-  AC_SUBST(x_libraries)
-fi
-AC_SUBST(QTE_NORTTI)
-AC_SUBST(LIB_XEXT)
-
-
-AC_LANG_RESTORE
-
-])
-
-AC_DEFUN(KDE_PRINT_QT_PROGRAM,
-[
-AC_REQUIRE([KDE_USE_QT])
-cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <ntqglobal.h>
-#include <ntqapplication.h>
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqevent.h>
-#include <ntqstring.h>
-#include <ntqstyle.h>
-EOF
-
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-#if TQT_VERSION < 210
-#error 1
-#endif
-EOF
-fi
-fi
-
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqcursor.h>
-#include <ntqstylefactory.h>
-#include <private/qucomextra_p.h>
-EOF
-fi
-
-echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
-cat >> conftest.$ac_ext <<EOF
-#error 1
-#endif
-
-int main() {
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-    QStringList *t = new QStringList();
-    Q_UNUSED(t);
-EOF
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-    QString s;
-    s.setLatin1("Elvis is alive", 14);
-EOF
-fi
-fi
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-    (void)QStyleFactory::create(QString::null);
-    QCursor c(Qt::WhatsThisCursor);
-EOF
-fi
-cat >> conftest.$ac_ext <<EOF
-    return 0;
-}
-EOF
-])
-
-AC_DEFUN(KDE_USE_QT,
-[
-if test -z "$1"; then
-  # Current default Qt version: 3.1
-  kde_qtver=3
-  kde_qtsubver=1
-else
-  kde_qtsubver=`echo "$1" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'`
-  # following is the check if subversion isnt found in passed argument
-  if test "$kde_qtsubver" = "$1"; then
-    kde_qtsubver=1
-  fi
-  kde_qtver=`echo "$1" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'`
-  if test "$kde_qtver" = "1"; then
-    kde_qtsubver=42
-  fi
-fi
-
-if test -z "$2"; then
-  if test "$kde_qtver" = "2"; then
-    if test $kde_qtsubver -gt 0; then
-      kde_qt_minversion=">= Qt 2.2.2"
-    else
-      kde_qt_minversion=">= Qt 2.0.2"
-    fi
-  fi
-  if test "$kde_qtver" = "3"; then
-    if test $kde_qtsubver -gt 0; then
-      kde_qt_minversion=">= Qt 3.1 (20021021)"
-    else
-      kde_qt_minversion=">= Qt 3.0"
-    fi
-  fi
-  if test "$kde_qtver" = "1"; then
-    kde_qt_minversion=">= 1.42 and < 2.0"
-  fi
-else
-   kde_qt_minversion=$2
-fi
-
-if test -z "$3"; then
-   if test $kde_qtver = 3; then
-     if test $kde_qtsubver -gt 0; then
-       kde_qt_verstring="TQT_VERSION >= 0x030100"
-     else
-       kde_qt_verstring="TQT_VERSION >= 300"
-     fi
-   fi
-   if test $kde_qtver = 2; then
-     if test $kde_qtsubver -gt 0; then
-       kde_qt_verstring="TQT_VERSION >= 222"
-     else
-       kde_qt_verstring="TQT_VERSION >= 200"
-     fi
-   fi
-   if test $kde_qtver = 1; then
-    kde_qt_verstring="TQT_VERSION >= 142 && TQT_VERSION < 200"
-   fi
-else
-   kde_qt_verstring=$3
-fi
-
-if test $kde_qtver = 3; then
-  kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3"
-fi
-if test $kde_qtver = 2; then
-   kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
-fi
-if test $kde_qtver = 1; then
-   kde_qt_dirs="$QTDIR /usr/lib/qt"
-fi
-])
-
-AC_DEFUN(KDE_CHECK_QT_DIRECT,
-[
-AC_REQUIRE([KDE_USE_QT])
-AC_MSG_CHECKING([if Qt compiles without flags])
-AC_CACHE_VAL(kde_cv_qt_direct,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
-ac_LIBRARY_PATH="$LIBRARY_PATH"
-ac_cxxflags_safe="$CXXFLAGS"
-ac_ldflags_safe="$LDFLAGS"
-ac_libs_safe="$LIBS"
-
-CXXFLAGS="$CXXFLAGS -I$qt_includes"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
-else
-LIBS="$LIBQT $LIBSOCKET"
-fi
-LD_LIBRARY_PATH=
-export LD_LIBRARY_PATH
-LIBRARY_PATH=
-export LIBRARY_PATH
-
-KDE_PRINT_QT_PROGRAM
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  kde_cv_qt_direct="yes"
-else
-  kde_cv_qt_direct="no"
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.$ac_ext >&AC_FD_CC
-fi
-
-rm -f conftest*
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-
-LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
-export LD_LIBRARY_PATH
-LIBRARY_PATH="$ac_LIBRARY_PATH"
-export LIBRARY_PATH
-AC_LANG_RESTORE
-])
-
-if test "$kde_cv_qt_direct" = "yes"; then
-  AC_MSG_RESULT(yes)
-  $1
-else
-  AC_MSG_RESULT(no)
-  $2
-fi
-])
-
-dnl ------------------------------------------------------------------------
-dnl Try to find the Qt headers and libraries.
-dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed)
-dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_PATH_QT_1_3,
-[
-AC_REQUIRE([K_PATH_X])
-AC_REQUIRE([KDE_USE_QT])
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-dnl ------------------------------------------------------------------------
-dnl Add configure flag to enable linking to MT version of Qt library.
-dnl ------------------------------------------------------------------------
-
-AC_ARG_ENABLE(
-  mt,
-  [  --disable-mt            link to non-threaded Qt (deprecated)],
-  kde_use_qt_mt=$enableval,
-  [
-    if test $kde_qtver = 3; then
-      kde_use_qt_mt=yes
-    else
-      kde_use_qt_mt=no
-    fi
-  ]
-)
-
-USING_QT_MT=""
-
-dnl ------------------------------------------------------------------------
-dnl If we not get --disable-tqt-mt then adjust some vars for the host.
-dnl ------------------------------------------------------------------------
-
-KDE_MT_LDFLAGS=
-KDE_MT_LIBS=
-if test "x$kde_use_qt_mt" = "xyes"; then
-  KDE_CHECK_THREADING
-  if test "x$kde_use_threading" = "xyes"; then
-    CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS"
-    KDE_MT_LDFLAGS="$USE_THREADS"
-    KDE_MT_LIBS="$LIBPTHREAD"
-  else
-    kde_use_qt_mt=no
-  fi
-fi
-AC_SUBST(KDE_MT_LDFLAGS)
-AC_SUBST(KDE_MT_LIBS)
-
-kde_qt_was_given=yes
-
-dnl ------------------------------------------------------------------------
-dnl If we haven't been told how to link to Qt, we work it out for ourselves.
-dnl ------------------------------------------------------------------------
-if test -z "$LIBQT_GLOB"; then
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    LIBQT_GLOB="libqte.*"
-  else
-    LIBQT_GLOB="libqt.*"
-  fi
-fi
-
-if test -z "$LIBQT"; then
-dnl ------------------------------------------------------------
-dnl If we got --enable-embedded then adjust the Qt library name.
-dnl ------------------------------------------------------------
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    qtlib="qte"
-  else
-    qtlib="qt"
-  fi
-
-  kde_int_qt="-l$qtlib"
-else
-  kde_int_qt="$LIBQT"
-  kde_lib_qt_set=yes
-fi
-
-if test -z "$LIBQPE"; then
-dnl ------------------------------------------------------------
-dnl If we got --enable-palmtop then add -lqpe to the link line
-dnl ------------------------------------------------------------
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    if test "x$kde_use_qt_emb_palm" = "xyes"; then
-      LIB_QPE="-lqpe"
-    else
-      LIB_QPE=""
-    fi
-  else
-    LIB_QPE=""
-  fi
-fi
-
-dnl ------------------------------------------------------------------------
-dnl If we got --enable-tqt-mt then adjust the Qt library name for the host.
-dnl ------------------------------------------------------------------------
-
-if test "x$kde_use_qt_mt" = "xyes"; then
-  if test -z "$LIBQT"; then
-    LIBQT="-l$qtlib-mt"
-    kde_int_qt="-l$qtlib-mt"
-  else
-    LIBQT="$qtlib-mt"
-    kde_int_qt="$qtlib-mt"
-  fi
-  LIBQT_GLOB="lib$qtlib-mt.*"
-  USING_QT_MT="using -mt"
-else
-  LIBQT="-l$qtlib"
-fi
-
-if test $kde_qtver != 1; then
-
-  AC_REQUIRE([AC_FIND_PNG])
-  AC_REQUIRE([AC_FIND_JPEG])
-  LIBQT="$LIBQT $LIBPNG $LIBJPEG"
-fi
-
-if test $kde_qtver = 3; then
-  AC_REQUIRE([KDE_CHECK_LIBDL])
-  LIBQT="$LIBQT $LIBDL"
-fi
-
-AC_MSG_CHECKING([for Qt])
-
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
-fi
-ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
-qt_libraries=""
-qt_includes=""
-AC_ARG_WITH(qt-dir,
-    [  --with-qt-dir=DIR       where the root of Qt is installed ],
-    [  ac_qt_includes="$withval"/include
-       ac_qt_libraries="$withval"/lib${tdelibsuff}
-       ac_qt_bindir="$withval"/bin
-    ])
-
-AC_ARG_WITH(qt-includes,
-    [  --with-qt-includes=DIR  where the Qt includes are. ],
-    [
-       ac_qt_includes="$withval"
-    ])
-
-kde_qt_libs_given=no
-
-AC_ARG_WITH(qt-libraries,
-    [  --with-qt-libraries=DIR where the Qt library is installed.],
-    [  ac_qt_libraries="$withval"
-       kde_qt_libs_given=yes
-    ])
-
-AC_CACHE_VAL(ac_cv_have_qt,
-[#try to guess Qt locations
-
-qt_incdirs=""
-for dir in $kde_qt_dirs; do
-   qt_incdirs="$qt_incdirs $dir/include $dir"
-done
-qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes"
-if test ! "$ac_qt_includes" = "NO"; then
-   qt_incdirs="$ac_qt_includes $qt_incdirs"
-fi
-
-if test "$kde_qtver" != "1"; then
-  kde_qt_header=ntqstyle.h
-else
-  kde_qt_header=ntqglobal.h
-fi
-
-AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir)
-ac_qt_includes="$qt_incdir"
-
-qt_libdirs=""
-for dir in $kde_qt_dirs; do
-   qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir"
-done
-qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
-if test ! "$ac_qt_libraries" = "NO"; then
-  qt_libdir=$ac_qt_libraries
-else
-  qt_libdirs="$ac_qt_libraries $qt_libdirs"
-  # if the Qt was given, the chance is too big that libqt.* doesn't exist
-  qt_libdir=NONE
-  for dir in $qt_libdirs; do
-    try="ls -1 $dir/${LIBQT_GLOB}"
-    if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
-  done
-fi
-
-ac_qt_libraries="$qt_libdir"
-
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-
-ac_cxxflags_safe="$CXXFLAGS"
-ac_ldflags_safe="$LDFLAGS"
-ac_libs_safe="$LIBS"
-
-CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
-LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
-LIBS="$LIBS $LIBQT $KDE_MT_LIBS"
-
-KDE_PRINT_QT_PROGRAM
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  rm -f conftest*
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.$ac_ext >&AC_FD_CC
-  ac_qt_libraries="NO"
-fi
-rm -f conftest*
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-
-AC_LANG_RESTORE
-if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
-  ac_cv_have_qt="have_qt=no"
-  ac_qt_notfound=""
-  missing_qt_mt=""
-  if test "$ac_qt_includes" = NO; then
-    if test "$ac_qt_libraries" = NO; then
-      ac_qt_notfound="(headers and libraries)";
-    else
-      ac_qt_notfound="(headers)";
-    fi
-  else
-    if test "x$kde_use_qt_mt" = "xyes"; then
-       missing_qt_mt="
-Make sure that you have compiled Qt with thread support!"
-       ac_qt_notfound="(library $qtlib-mt)";
-    else
-       ac_qt_notfound="(library $qtlib)";
-    fi
-  fi
-
-  AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
-For more details about this problem, look at the end of config.log.$missing_qt_mt])
-else
-  have_qt="yes"
-fi
-])
-
-eval "$ac_cv_have_qt"
-
-if test "$have_qt" != yes; then
-  AC_MSG_RESULT([$have_qt]);
-else
-  ac_cv_have_qt="have_qt=yes \
-    ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
-  AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT])
-
-  qt_libraries="$ac_qt_libraries"
-  qt_includes="$ac_qt_includes"
-fi
-
-if test ! "$kde_qt_libs_given" = "yes"; then
-KDE_CHECK_QT_DIRECT(qt_libraries= ,[])
-fi
-
-AC_SUBST(qt_libraries)
-AC_SUBST(qt_includes)
-
-if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
- QT_INCLUDES=""
-else
- QT_INCLUDES="-I$qt_includes"
- all_includes="$QT_INCLUDES $all_includes"
-fi
-
-if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
- QT_LDFLAGS=""
-else
- QT_LDFLAGS="-L$qt_libraries"
- all_libraries="$all_libraries $QT_LDFLAGS"
-fi
-test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS"
-
-AC_SUBST(QT_INCLUDES)
-AC_SUBST(QT_LDFLAGS)
-AC_PATH_QT_MOC_UIC
-
-KDE_CHECK_QT_JPEG
-
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)'
-else
-LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)'
-fi
-test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS"
-
-AC_SUBST(LIB_QT)
-AC_SUBST(LIB_QPE)
-
-AC_SUBST(kde_qtver)
-])
-
-AC_DEFUN(AC_PATH_QT,
-[
-AC_PATH_QT_1_3
-])
-
-AC_DEFUN(KDE_CHECK_UIC_PLUGINS,
-[
-AC_REQUIRE([AC_PATH_QT_MOC_UIC])
-
-if test x$ac_uic_supports_libpath = xyes; then
-
-AC_MSG_CHECKING([if UIC has KDE plugins available])
-AC_CACHE_VAL(kde_cv_uic_plugins,
-[
-cat > actest.ui << EOF
-<!DOCTYPE UI><UI version="3.0" stdsetdef="1">
-<class>NewConnectionDialog</class>
-<widget class="QDialog">
-   <widget class="KLineEdit">
-        <property name="name">
-           <cstring>testInput</cstring>
-        </property>
-   </widget>
-</widget>
-</UI>
-EOF
-       
-
-
-kde_cv_uic_plugins=no
-kde_line="$UIC_PATH -L $kde_widgetdir"
-if test x$ac_uic_supports_nounload = xyes; then
-   kde_line="$kde_line -nounload"
-fi
-kde_line="$kde_line -impl actest.h actest.ui > actest.cpp"
-if AC_TRY_EVAL(kde_line); then
-	if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then
-		kde_cv_uic_plugins=yes
-	fi
-fi
-rm -f actest.ui actest.cpp
-])
-
-AC_MSG_RESULT([$kde_cv_uic_plugins])
-if test "$kde_cv_uic_plugins" != yes; then
-	AC_MSG_ERROR([you need to install tdelibs first.])
-fi
-fi
-])
-
-AC_DEFUN(KDE_CHECK_FINAL,
-[
-  AC_ARG_ENABLE(final, [  --enable-final          build size optimized apps (experimental - needs lots of memory)],
-	kde_use_final=$enableval, kde_use_final=no)
-
-  if test "x$kde_use_final" = "xyes"; then
-      KDE_USE_FINAL_TRUE=""
-      KDE_USE_FINAL_FALSE="#"
-   else
-      KDE_USE_FINAL_TRUE="#"
-      KDE_USE_FINAL_FALSE=""
-  fi
-  AC_SUBST(KDE_USE_FINAL_TRUE)
-  AC_SUBST(KDE_USE_FINAL_FALSE)
-])
-
-AC_DEFUN(KDE_CHECK_CLOSURE,
-[
-  AC_ARG_ENABLE(closure, [  --disable-closure       don't delay template instantiation],
-  	kde_use_closure=$enableval, kde_use_closure=yes)
-
-  KDE_NO_UNDEFINED=""
-  if test "x$kde_use_closure" = "xyes"; then
-       KDE_USE_CLOSURE_TRUE=""
-       KDE_USE_CLOSURE_FALSE="#"
-#       CXXFLAGS="$CXXFLAGS $REPO"
-  else
-       KDE_USE_CLOSURE_TRUE="#"
-       KDE_USE_CLOSURE_FALSE=""
-       KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined],
-            [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined],
-		[KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"],
-		[KDE_NO_UNDEFINED=""])],
-	    [KDE_NO_UNDEFINED=""])
-  fi
-  AC_SUBST(KDE_USE_CLOSURE_TRUE)
-  AC_SUBST(KDE_USE_CLOSURE_FALSE)
-  AC_SUBST(KDE_NO_UNDEFINED)
-])
-
-AC_DEFUN(KDE_CHECK_NMCHECK,
-[
-  AC_ARG_ENABLE(nmcheck, [  --enable-nmcheck        enable automatic namespace cleanness check],
-	kde_use_nmcheck=$enableval, kde_use_nmcheck=no)
-
-  if test "$kde_use_nmcheck" = "yes"; then
-      KDE_USE_NMCHECK_TRUE=""
-      KDE_USE_NMCHECK_FALSE="#"
-   else
-      KDE_USE_NMCHECK_TRUE="#"
-      KDE_USE_NMCHECK_FALSE=""
-  fi
-  AC_SUBST(KDE_USE_NMCHECK_TRUE)
-  AC_SUBST(KDE_USE_NMCHECK_FALSE)
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Now, the same with KDE
-dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed)
-dnl and $(kde_includes) will be the kdehdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_BASE_PATH_KDE,
-[
-AC_PREREQ([2.13])
-AC_REQUIRE([AC_PATH_QT])dnl
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_CHECK_RPATH
-AC_MSG_CHECKING([for KDE])
-
-if test "${prefix}" != NONE; then
-  kde_includes=${prefix}/include
-  ac_kde_includes=$prefix/include
-
-  if test "${exec_prefix}" != NONE; then
-     kde_libraries=${libdir}
-     ac_kde_libraries=$libdir
-     if test "$ac_kde_libraries" = '${exec_prefix}/lib'${tdelibsuff}; then
-	ac_kde_libraries=$exec_prefix/lib${tdelibsuff}
-     fi
-  else
-     kde_libraries=${prefix}/lib${tdelibsuff}
-     ac_kde_libraries=$prefix/lib${tdelibsuff}
-  fi
-else
-  ac_kde_includes=
-  ac_kde_libraries=
-  kde_libraries=""
-  kde_includes=""
-fi
-
-AC_CACHE_VAL(ac_cv_have_kde,
-[#try to guess kde locations
-
-if test "$kde_qtver" = 1; then
-  kde_check_header="ksock.h"
-  kde_check_lib="libtdecore.la"
-else
-  kde_check_header="ksharedptr.h"
-  kde_check_lib="libtdeio.la"
-fi
-
-if test -z "$1"; then
-
-kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes"
-test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs"
-kde_incdirs="$ac_kde_includes $kde_incdirs"
-AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir)
-ac_kde_includes="$kde_incdir"
-
-if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
-  AC_MSG_ERROR([
-in the prefix, you've chosen, are no KDE headers installed. This will fail.
-So, check this please and use another prefix!])
-fi
-
-kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}"
-test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs"
-kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs"
-AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir)
-ac_kde_libraries="$kde_libdir"
-
-kde_widgetdir=NO
-dnl this might be somewhere else
-AC_FIND_FILE("kde3/plugins/designer/tdewidgets.la", $kde_libdirs, kde_widgetdir)
-
-if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
-AC_MSG_ERROR([
-in the prefix, you've chosen, are no KDE libraries installed. This will fail.
-So, check this please and use another prefix!])
-fi
-
-if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then
-AC_MSG_ERROR([
-I can't find the designer plugins. These are required and should have been installed
-by tdelibs])
-fi
-
-if test -n "$kde_widgetdir"; then
-    kde_widgetdir="$kde_widgetdir/kde3/plugins/designer"
-fi
-
-
-if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then
-  ac_cv_have_kde="have_kde=no"
-else
-  ac_cv_have_kde="have_kde=yes \
-    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
-fi
-
-else dnl test -z $1
-
-  ac_cv_have_kde="have_kde=no"
-
-fi
-])dnl
-
-eval "$ac_cv_have_kde"
-
-if test "$have_kde" != "yes"; then
- if test "${prefix}" = NONE; then
-  ac_kde_prefix="$ac_default_prefix"
- else
-  ac_kde_prefix="$prefix"
- fi
- if test "$exec_prefix" = NONE; then
-  ac_kde_exec_prefix="$ac_kde_prefix"
-  AC_MSG_RESULT([will be installed in $ac_kde_prefix])
- else
-  ac_kde_exec_prefix="$exec_prefix"
-  AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix])
- fi
-
- kde_libraries="${libdir}"
- kde_includes=${ac_kde_prefix}/include
-
-else
-  ac_cv_have_kde="have_kde=yes \
-    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
-  AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes])
-
-  kde_libraries="$ac_kde_libraries"
-  kde_includes="$ac_kde_includes"
-fi
-AC_SUBST(kde_libraries)
-AC_SUBST(kde_includes)
-
-if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes"  || test "$kde_includes" = "/usr/include"; then
- KDE_INCLUDES=""
-else
- KDE_INCLUDES="-I$kde_includes"
- all_includes="$KDE_INCLUDES $all_includes"
-fi
-
-KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION"
- 
-KDE_LDFLAGS="-L$kde_libraries"
-if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then 
- all_libraries="$all_libraries $KDE_LDFLAGS"
-fi
-
-AC_SUBST(KDE_LDFLAGS)
-AC_SUBST(KDE_INCLUDES)
-
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
-all_libraries="$all_libraries $USER_LDFLAGS"
-all_includes="$all_includes $USER_INCLUDES"
-AC_SUBST(all_includes)
-AC_SUBST(all_libraries)
-
-if test -z "$1"; then
-KDE_CHECK_UIC_PLUGINS
-fi
-
-ac_kde_libraries="$kde_libdir"
-
-AC_SUBST(AUTODIRS)
-
-
-])
-
-AC_DEFUN(KDE_CHECK_EXTRA_LIBS,
-[
-AC_MSG_CHECKING(for extra includes)
-AC_ARG_WITH(extra-includes, [  --with-extra-includes=DIR
-                          adds non standard include paths],
-  kde_use_extra_includes="$withval",
-  kde_use_extra_includes=NONE
-)
-kde_extra_includes=
-if test -n "$kde_use_extra_includes" && \
-   test "$kde_use_extra_includes" != "NONE"; then
-
-   ac_save_ifs=$IFS
-   IFS=':'
-   for dir in $kde_use_extra_includes; do
-     kde_extra_includes="$kde_extra_includes $dir"
-     USER_INCLUDES="$USER_INCLUDES -I$dir"
-   done
-   IFS=$ac_save_ifs
-   kde_use_extra_includes="added"
-else
-   kde_use_extra_includes="no"
-fi
-AC_SUBST(USER_INCLUDES)
-
-AC_MSG_RESULT($kde_use_extra_includes)
-
-kde_extra_libs=
-AC_MSG_CHECKING(for extra libs)
-AC_ARG_WITH(extra-libs, [  --with-extra-libs=DIR   adds non standard library paths],
-  kde_use_extra_libs=$withval,
-  kde_use_extra_libs=NONE
-)
-if test -n "$kde_use_extra_libs" && \
-   test "$kde_use_extra_libs" != "NONE"; then
-
-   ac_save_ifs=$IFS
-   IFS=':'
-   for dir in $kde_use_extra_libs; do
-     kde_extra_libs="$kde_extra_libs $dir"
-     KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
-     USER_LDFLAGS="$USER_LDFLAGS -L$dir"
-   done
-   IFS=$ac_save_ifs
-   kde_use_extra_libs="added"
-else
-   kde_use_extra_libs="no"
-fi
-
-AC_SUBST(USER_LDFLAGS)
-
-AC_MSG_RESULT($kde_use_extra_libs)
-
-])
-
-AC_DEFUN(KDE_1_CHECK_PATH_HEADERS,
-[
-    AC_MSG_CHECKING([for KDE headers installed])
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-cat > conftest.$ac_ext <<EOF
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-#include "confdefs.h"
-#include <kapp.h>
-
-int main() {
-    printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data());
-    printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data());
-    printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data());
-    printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data());
-    printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data());
-    printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data());
-    printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data());
-    printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data());
-    printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data());
-    printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data());
-    printf("kde_wallpaperdir=\\"%s\\"\n",
-	TDEApplication::kde_wallpaperdir().data());
-    printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data());
-    printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data());
-    printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_moduledir=\\"/tmp/dummy\\"\n");
-    printf("kde_styledir=\\"/tmp/dummy\\"\n");
-    printf("kde_widgetdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_appsdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_directorydir=\\"/tmp/dummy\\"\n");
-    return 0;
-    }
-EOF
-
- ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
- if AC_TRY_EVAL(ac_compile); then
-   AC_MSG_RESULT(yes)
- else
-   AC_MSG_ERROR([your system is not able to compile a small KDE application!
-Check, if you installed the KDE header files correctly.
-For more details about this problem, look at the end of config.log.])
-  fi
-
-  AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_KDEQTADDON,
-[
-AC_MSG_CHECKING(for kde-qt-addon)
-AC_CACHE_VAL(kde_cv_have_kdeqtaddon,
-[
- kde_ldflags_safe="$LDFLAGS"
- kde_libs_safe="$LIBS"
- kde_cxxflags_safe="$CXXFLAGS"
-
- LIBS="-lkde-qt-addon $LIBQT $LIBS"
- CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/tde $all_includes"
- LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS"
-
- AC_TRY_LINK([
-   #include <ntqdom.h>
- ],
- [
-   QDomDocument doc;
- ],
-  kde_cv_have_kdeqtaddon=yes,
-  kde_cv_have_kdeqtaddon=no
- )
-
- LDFLAGS=$kde_ldflags_safe
- LIBS=$kde_libs_safe
- CXXFLAGS=$kde_cxxflags_safe
-])
-
-AC_MSG_RESULT($kde_cv_have_kdeqtaddon)
-
-if test "$kde_cv_have_kdeqtaddon" = "no"; then
-  AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first.
-It is a separate package (and CVS module) named kde-qt-addon.])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_KIMGIO,
-[
-   AC_REQUIRE([AC_BASE_PATH_KDE])
-   AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-   AC_REQUIRE([AC_FIND_TIFF])
-   AC_REQUIRE([AC_FIND_JPEG])
-   AC_REQUIRE([AC_FIND_PNG])
-   AC_REQUIRE([AC_FIND_JASPER])
-   AC_REQUIRE([KDE_CREATE_LIBS_ALIASES])
-
-   if test "$1" = "existance"; then
-     AC_LANG_SAVE
-     AC_LANG_CPLUSPLUS
-     kde_save_LIBS="$LIBS"
-     LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm"
-     AC_CHECK_LIB(kimgio, kimgioRegister, [
-      LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no)
-     LIBS="$kde_save_LIBS"
-     AC_LANG_RESTORE
-   else
-     LIBKIMGIO_EXISTS=yes
-   fi
-
-   if test "$LIBKIMGIO_EXISTS" = "yes"; then
-     LIB_KIMGIO='-lkimgio'
-   else
-     LIB_KIMGIO=''
-   fi
-   AC_SUBST(LIB_KIMGIO)
-])
-
-AC_DEFUN(KDE_CREATE_LIBS_ALIASES,
-[
-   AC_REQUIRE([KDE_MISC_TESTS])
-   AC_REQUIRE([KDE_CHECK_LIBDL])
-   AC_REQUIRE([K_PATH_X])
-
-if test $kde_qtver = 3; then
-   AC_SUBST(LIB_TDECORE, "-ltdecore")
-   AC_SUBST(LIB_TDEUI, "-ltdeui")
-   AC_SUBST(LIB_TDEIO, "-ltdeio")
-   AC_SUBST(LIB_SMB, "-lsmb")
-   AC_SUBST(LIB_KAB, "-lkab")
-   AC_SUBST(LIB_KABC, "-ltdeabc")
-   AC_SUBST(LIB_TDEHTML, "-ltdehtml")
-   AC_SUBST(LIB_TDESPELL, "-ltdespell")
-   AC_SUBST(LIB_TDEPARTS, "-ltdeparts")
-   AC_SUBST(LIB_TDEPRINT, "-ltdeprint")
-# these are for backward compatibility
-   AC_SUBST(LIB_TDESYCOCA, "-ltdeio")
-   AC_SUBST(LIB_KFILE, "-ltdeio")
-elif test $kde_qtver = 2; then
-   AC_SUBST(LIB_TDECORE, "-ltdecore")
-   AC_SUBST(LIB_TDEUI, "-ltdeui")
-   AC_SUBST(LIB_TDEIO, "-ltdeio")
-   AC_SUBST(LIB_TDESYCOCA, "-ltdesycoca")
-   AC_SUBST(LIB_SMB, "-lsmb")
-   AC_SUBST(LIB_KFILE, "-ltdefile")
-   AC_SUBST(LIB_KAB, "-lkab")
-   AC_SUBST(LIB_TDEHTML, "-ltdehtml")
-   AC_SUBST(LIB_TDESPELL, "-ltdespell")
-   AC_SUBST(LIB_TDEPARTS, "-ltdeparts")
-   AC_SUBST(LIB_TDEPRINT, "-ltdeprint")
-else
-   AC_SUBST(LIB_TDECORE, "-ltdecore -lXext $(LIB_QT)")
-   AC_SUBST(LIB_TDEUI, "-ltdeui $(LIB_TDECORE)")
-   AC_SUBST(LIB_KFM, "-lkfm $(LIB_TDECORE)")
-   AC_SUBST(LIB_KFILE, "-ltdefile $(LIB_KFM) $(LIB_TDEUI)")
-   AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_TDECORE)")
-fi
-])
-
-AC_DEFUN(AC_PATH_KDE,
-[
-  AC_BASE_PATH_KDE
-  AC_ARG_ENABLE(path-check, [  --disable-path-check    don't try to find out, where to install],
-  [
-  if test "$enableval" = "no";
-    then ac_use_path_checking="default"
-    else ac_use_path_checking=""
-  fi
-  ],
-  [
-  if test "$kde_qtver" = 1;
-    then ac_use_path_checking=""
-    else ac_use_path_checking="default"
-  fi
-  ]
-  )
-
-  AC_CREATE_KFSSTND($ac_use_path_checking)
-
-  AC_SUBST_KFSSTND
-  KDE_CREATE_LIBS_ALIASES
-])
-
-dnl KDE_CHECK_FUNC_EXT(<func>, [headers], [sample-use], [C prototype], [autoheader define], [call if found])
-AC_DEFUN(KDE_CHECK_FUNC_EXT,
-[
-AC_MSG_CHECKING(for $1)
-AC_CACHE_VAL(kde_cv_func_$1,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-save_CXXFLAGS="$CXXFLAGS"
-kde_safe_LIBS="$LIBS"
-LIBS="$LIBS $X_EXTRA_LIBS"
-if test "$GXX" = "yes"; then
-CXXFLAGS="$CXXFLAGS -pedantic-errors"
-fi
-AC_TRY_COMPILE([
-$2
-],
-[
-$3
-],
-kde_cv_func_$1=yes,
-kde_cv_func_$1=no)
-CXXFLAGS="$save_CXXFLAGS"
-LIBS="$kde_safe_LIBS"
-AC_LANG_RESTORE
-])
-
-AC_MSG_RESULT($kde_cv_func_$1)
-
-AC_MSG_CHECKING([if $1 needs custom prototype])
-AC_CACHE_VAL(kde_cv_proto_$1,
-[
-if test "x$kde_cv_func_$1" = xyes; then
-  kde_cv_proto_$1=no
-else
-  case "$1" in
-	setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat)
-		kde_cv_proto_$1="yes - in libtdefakes"
-		;;
-	*)
-		kde_cv_proto_$1=unknown
-		;;
-  esac
-fi
-
-if test "x$kde_cv_proto_$1" = xunknown; then
-
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-  kde_safe_libs=$LIBS
-  LIBS="$LIBS $X_EXTRA_LIBS"
-  AC_TRY_LINK([
-$2
-
-extern "C" $4;
-],
-[
-$3
-],
-[ kde_cv_func_$1=yes
-  kde_cv_proto_$1=yes ],
-  [kde_cv_proto_$1="$1 unavailable"]
-)
-LIBS=$kde_safe_libs
-AC_LANG_RESTORE
-fi
-])
-AC_MSG_RESULT($kde_cv_proto_$1)
-
-if test "x$kde_cv_func_$1" = xyes; then
-  AC_DEFINE(HAVE_$5, 1, [Define if you have $1])
-  $6
-fi
-if test "x$kde_cv_proto_$1" = xno; then
-  AC_DEFINE(HAVE_$5_PROTO, 1,
-  [Define if you have the $1 prototype])
-fi
-
-AH_VERBATIM([_HAVE_$5_PROTO],
-[
-#if !defined(HAVE_$5_PROTO)
-#ifdef __cplusplus
-extern "C"
-#endif
-$4;
-#endif
-])
-])
-
-AC_DEFUN(AC_CHECK_SETENV,
-[
-	KDE_CHECK_FUNC_EXT(setenv, [
-#include <stdlib.h>
-], 
-		[setenv("VAR", "VALUE", 1);],
-	        [int setenv (const char *, const char *, int)],
-		[SETENV])
-])
-
-AC_DEFUN(AC_CHECK_UNSETENV,
-[
-	KDE_CHECK_FUNC_EXT(unsetenv, [
-#include <stdlib.h>
-], 
-		[unsetenv("VAR");],
-	        [void unsetenv (const char *)],
-		[UNSETENV])
-])
-
-AC_DEFUN(AC_CHECK_GETDOMAINNAME,
-[
-	KDE_CHECK_FUNC_EXT(getdomainname, [
-#include <stdlib.h>
-#include <unistd.h>
-], 
-		[
-char buffer[200];
-getdomainname(buffer, 200);
-], 	
-	        [int getdomainname (char *, size_t)],
-		[GETDOMAINNAME])
-])
-
-AC_DEFUN(AC_CHECK_GETHOSTNAME,
-[
-	KDE_CHECK_FUNC_EXT(gethostname, [
-#include <stdlib.h>
-#include <unistd.h>
-], 
-		[
-char buffer[200];
-gethostname(buffer, 200);
-], 	
-	        [int gethostname (char *, unsigned int)],
-		[GETHOSTNAME])
-])
-
-AC_DEFUN(AC_CHECK_USLEEP,
-[
-	KDE_CHECK_FUNC_EXT(usleep, [
-#include <unistd.h>
-], 
-		[
-usleep(200);
-], 	
-	        [int usleep (unsigned int)],
-		[USLEEP])
-])
-
-
-AC_DEFUN(AC_CHECK_RANDOM,
-[
-	KDE_CHECK_FUNC_EXT(random, [
-#include <stdlib.h>
-], 
-		[
-random();
-], 	
-	        [long int random(void)],
-		[RANDOM])
-
-	KDE_CHECK_FUNC_EXT(srandom, [
-#include <stdlib.h>
-], 
-		[
-srandom(27);
-], 	
-	        [void srandom(unsigned int)],
-		[SRANDOM])
-
-])
-
-AC_DEFUN(AC_CHECK_INITGROUPS,
-[
-	KDE_CHECK_FUNC_EXT(initgroups, [
-#include <sys/types.h>
-#include <unistd.h>
-#include <grp.h>
-],
-	[
-char buffer[200];
-initgroups(buffer, 27);
-],
-	[int initgroups(const char *, gid_t)],
-	[INITGROUPS])
-])
-
-AC_DEFUN(AC_CHECK_MKSTEMPS,
-[
-	KDE_CHECK_FUNC_EXT(mkstemps, [
-#include <stdlib.h>
-#include <unistd.h>
-],
-	[
-mkstemps("/tmp/aaaXXXXXX", 6);
-],
-	[int mkstemps(char *, int)],
-	[MKSTEMPS])
-])
-
-AC_DEFUN(AC_CHECK_MKDTEMP,
-[
-	KDE_CHECK_FUNC_EXT(mkdtemp, [
-#include <stdlib.h>
-#include <unistd.h>
-],
-	[
-mkdtemp("/tmp/aaaXXXXXX");
-],
-	[char *mkdtemp(char *)],
-	[MKDTEMP])
-])
-
-
-AC_DEFUN(AC_CHECK_RES_INIT,
-[
-  AC_MSG_CHECKING([if res_init needs -lresolv])
-  kde_libs_safe="$LIBS"
-  LIBS="$LIBS $X_EXTRA_LIBS -lresolv"
-  AC_TRY_LINK(
-    [
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-    ],
-    [
-      res_init(); 
-    ],
-    [
-      LIBRESOLV="-lresolv"
-      AC_MSG_RESULT(yes)
-      AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function])
-    ],
-    [ AC_MSG_RESULT(no) ]
-  )
-  LIBS=$kde_libs_safe
-  AC_SUBST(LIBRESOLV)
-
-  AC_MSG_CHECKING([if res_init is available])
-  AC_TRY_COMPILE(
-    [
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-    ],
-    [
-      res_init();
-    ],
-    [
-      AC_MSG_RESULT(yes)
-      AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function])
-    ],
-    [ AC_MSG_RESULT(no) ]
-  )
-])
-
-AC_DEFUN(AC_CHECK_STRLCPY,
-[
-	KDE_CHECK_FUNC_EXT(strlcpy, [
-#include <string.h>
-],
-[ char buf[20];
-  strlcpy(buf, "KDE function test", sizeof(buf));
-],
- 	[unsigned long strlcpy(char*, const char*, unsigned long)],
-	[STRLCPY])
-])
-
-AC_DEFUN(AC_CHECK_STRLCAT,
-[
-	KDE_CHECK_FUNC_EXT(strlcat, [
-#include <string.h>
-],
-[ char buf[20];
-  buf[0]='\0';
-  strlcat(buf, "KDE function test", sizeof(buf));
-],
- 	[unsigned long strlcat(char*, const char*, unsigned long)],
-	[STRLCAT])
-])
-
-AC_DEFUN(AC_FIND_GIF,
-   [AC_MSG_CHECKING([for giflib])
-AC_CACHE_VAL(ac_cv_lib_gif,
-[ac_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$all_libraries -lgif -lX11 $LIBSOCKET"
-else
-LIBS="$all_libraries -lgif"
-fi
-AC_TRY_LINK(dnl
-[
-#ifdef __cplusplus
-extern "C" {
-#endif
-int GifLastError(void);
-#ifdef __cplusplus
-}
-#endif
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-],
-            [return GifLastError();],
-            eval "ac_cv_lib_gif=yes",
-            eval "ac_cv_lib_gif=no")
-LIBS="$ac_save_LIBS"
-])dnl
-if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then
-  AC_MSG_RESULT(yes)
-  AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif])
-else
-  AC_MSG_ERROR(You need giflib30. Please install the tdesupport package)
-fi
-])
-
-AC_DEFUN(KDE_FIND_JPEG_HELPER,
-[
-AC_MSG_CHECKING([for libjpeg$2])
-AC_CACHE_VAL(ac_cv_lib_jpeg_$1,
-[
-AC_LANG_C
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(
-[/* Override any gcc2 internal prototype to avoid an error.  */
-struct jpeg_decompress_struct;
-typedef struct jpeg_decompress_struct * j_decompress_ptr;
-typedef int size_t;
-#ifdef __cplusplus
-extern "C" {
-#endif
-    void jpeg_CreateDecompress(j_decompress_ptr cinfo,
-                                    int version, size_t structsize);
-#ifdef __cplusplus
-}
-#endif
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-],
-            [jpeg_CreateDecompress(0L, 0, 0);],
-            eval "ac_cv_lib_jpeg_$1=-ljpeg$2",
-            eval "ac_cv_lib_jpeg_$1=no")
-LIBS="$ac_save_LIBS"
-CFLAGS="$ac_save_CFLAGS"
-])
-
-if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then
-  LIBJPEG="$ac_cv_lib_jpeg_$1"
-  AC_MSG_RESULT($ac_cv_lib_jpeg_$1)
-else
-  AC_MSG_RESULT(no)
-  $3
-fi
-
-])
-
-AC_DEFUN(AC_FIND_JPEG,
-[
-dnl first look for libraries
-KDE_FIND_JPEG_HELPER(6b, 6b,
-   KDE_FIND_JPEG_HELPER(normal, [],
-    [
-       LIBJPEG=
-    ]
-   )
-)
-
-dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h
-dnl requires system dependent includes loaded before it)
-jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes"
-AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir)
-test "x$jpeg_incdir" = xNO && jpeg_incdir=
-
-dnl if headers _and_ libraries are missing, this is no error, and we
-dnl continue with a warning (the user will get no jpeg support in tdehtml)
-dnl if only one is missing, it means a configuration error, but we still
-dnl only warn
-if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg])
-else
-  if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
-    AC_MSG_WARN([
-There is an installation error in jpeg support. You seem to have only one
-of either the headers _or_ the libraries installed. You may need to either
-provide correct --with-extra-... options, or the development package of
-libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
-Disabling JPEG support.
-])
-  else
-    AC_MSG_WARN([libjpeg not found. disable JPEG support.])
-  fi
-  jpeg_incdir=
-  LIBJPEG=
-fi
-
-AC_SUBST(LIBJPEG)
-AH_VERBATIM(_AC_CHECK_JPEG,
-[/*
- * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
- * headers and I'm too lazy to write a configure test as long as only
- * unixware is related
- */
-#ifdef _UNIXWARE
-#define HAVE_BOOLEAN
-#endif
-])
-])
-
-AC_DEFUN(KDE_CHECK_QT_JPEG,
-[
-if test -n "$LIBJPEG"; then
-AC_MSG_CHECKING([if Qt needs $LIBJPEG])
-AC_CACHE_VAL(kde_cv_qt_jpeg,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS $LIBQT"
-LIBS=`echo $LIBS | sed "s/$LIBJPEG//"`
-ac_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(
-[#include <ntqapplication.h>],
-            [
-            int argc;
-            char** argv;
-            QApplication app(argc, argv);],
-            eval "kde_cv_qt_jpeg=no",
-            eval "kde_cv_qt_jpeg=yes")
-LIBS="$ac_save_LIBS"
-CXXFLAGS="$ac_save_CXXFLAGS"
-AC_LANG_RESTORE
-fi
-])
-
-if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then
-  AC_MSG_RESULT(yes)
-  LIBJPEG_QT='$(LIBJPEG)'
-else
-  AC_MSG_RESULT(no)
-  LIBJPEG_QT=
-fi
-
-])
-
-AC_DEFUN(AC_FIND_ZLIB,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_MSG_CHECKING([for libz])
-AC_CACHE_VAL(ac_cv_lib_z,
-[
-AC_LANG_C
-kde_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(dnl
-[
-#include<zlib.h>
-],
-[
-  char buf[42];
-  gzFile f = (gzFile) 0;
-  /* this would segfault.. but we only link, don't run */
-  (void) gzgets(f, buf, sizeof(buf));
-
-  return (zlibVersion() == ZLIB_VERSION); 
-],
-            eval "ac_cv_lib_z='-lz'",
-            eval "ac_cv_lib_z=no")
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if test ! "$ac_cv_lib_z" = no; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz])
-  LIBZ="$ac_cv_lib_z"
-  AC_MSG_RESULT($ac_cv_lib_z)
-else
-  AC_MSG_ERROR(not found. 
-          Possibly configure picks up an outdated version
-          installed by XFree86. Remove it from your system.
-
-          Check your installation and look into config.log)
-  LIBZ=""
-fi
-AC_SUBST(LIBZ)
-])
-
-AC_DEFUN(KDE_TRY_TIFFLIB,
-[
-AC_MSG_CHECKING([for libtiff $1])
-
-AC_CACHE_VAL(kde_cv_libtiff_$1,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-kde_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm"
-else
-LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm"
-fi
-kde_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
-
-AC_TRY_LINK(dnl
-[
-#include<tiffio.h>
-],
-    [return (TIFFOpen( "", "r") == 0); ],
-[
-    kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ"
-], [
-    kde_cv_libtiff_$1=no
-])
-
-LIBS="$kde_save_LIBS"
-CXXFLAGS="$kde_save_CXXFLAGS"
-AC_LANG_RESTORE
-])
-
-if test "$kde_cv_libtiff_$1" = "no"; then
-    AC_MSG_RESULT(no)
-    LIBTIFF=""
-    $3
-else
-    LIBTIFF="$kde_cv_libtiff_$1"
-    AC_MSG_RESULT(yes)
-    AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff])
-    $2
-fi
-
-])
-
-AC_DEFUN(AC_FIND_TIFF,
-[
-AC_REQUIRE([K_PATH_X])
-AC_REQUIRE([AC_FIND_ZLIB])
-AC_REQUIRE([AC_FIND_JPEG])
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
-KDE_TRY_TIFFLIB(tiff, [],
-   KDE_TRY_TIFFLIB(tiff34))
-
-AC_SUBST(LIBTIFF)
-])
-
-
-AC_DEFUN(AC_FIND_PNG,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_REQUIRE([AC_FIND_ZLIB])
-AC_MSG_CHECKING([for libpng])
-AC_CACHE_VAL(ac_cv_lib_png,
-[
-kde_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
-else
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm"
-fi
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_LANG_C
-AC_TRY_LINK(dnl
-    [
-    #include<png.h>
-    ],
-    [
-    png_structp png_ptr = png_create_read_struct(  /* image ptr */
-		PNG_LIBPNG_VER_STRING, 0, 0, 0 );
-    return( png_ptr != 0 );
-    ],
-    eval "ac_cv_lib_png='-lpng $LIBZ -lm'",
-    eval "ac_cv_lib_png=no"
-)
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng])
-  LIBPNG="$ac_cv_lib_png"
-  AC_SUBST(LIBPNG)
-  AC_MSG_RESULT($ac_cv_lib_png)
-else
-  AC_MSG_RESULT(no)
-  LIBPNG=""
-  AC_SUBST(LIBPNG)
-fi
-])
-
-
-AC_DEFUN(AC_FIND_JASPER,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_REQUIRE([AC_FIND_JPEG])
-AC_MSG_CHECKING([for jasper])
-AC_CACHE_VAL(ac_cv_jasper,
-[
-kde_save_LIBS="$LIBS"
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_LANG_C
-AC_TRY_LINK(dnl
-    [
-    #include<jasper/jasper.h>
-    ],
-    [
-    return( jas_init() );
-    ],
-    eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'",
-    eval "ac_cv_jasper=no"
-)
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then
-  AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper])
-  LIB_JASPER="$ac_cv_jasper"
-  AC_MSG_RESULT($ac_cv_jasper)
-else
-  AC_MSG_RESULT(no)
-  LIB_JASPER=""
-fi
-AC_SUBST(LIB_JASPER)
-])
-
-AC_DEFUN(AC_CHECK_BOOL,
-[
-  AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool])
-])
-
-AC_DEFUN(AC_CHECK_GNU_EXTENSIONS,
-[
-AC_MSG_CHECKING(if you need GNU extensions)
-AC_CACHE_VAL(ac_cv_gnu_extensions,
-[
-cat > conftest.c << EOF
-#include <features.h>
-
-#ifdef __GNU_LIBRARY__
-yes
-#endif
-EOF
-
-if (eval "$ac_cpp conftest.c") 2>&5 |
-  egrep "yes" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_gnu_extensions=yes
-else
-  ac_cv_gnu_extensions=no
-fi
-])
-
-AC_MSG_RESULT($ac_cv_gnu_extensions)
-if test "$ac_cv_gnu_extensions" = "yes"; then
-  AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_COMPILER_FLAG,
-[
-AC_MSG_CHECKING([whether $CXX supports -$1])
-kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'`
-AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache,
-[
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -$1"
-  AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], [])
-  CXXFLAGS="$save_CXXFLAGS"
-  AC_LANG_RESTORE
-])
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- AC_MSG_RESULT(yes)
- :
- $2
-else
- AC_MSG_RESULT(no)
- :
- $3
-fi
-])
-
-dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables
-dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever])
-dnl it's all white-space separated
-AC_DEFUN(AC_REMOVE_FORBIDDEN,
-[ __val=$$1
-  __forbid=" $2 "
-  if test -n "$__val"; then
-    __new=""
-    ac_save_IFS=$IFS
-    IFS=" 	"
-    for i in $__val; do
-      case "$__forbid" in
-        *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;;
-	*) # Careful to not add spaces, where there were none, because otherwise
-	   # libtool gets confused, if we change e.g. CXX
-	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
-      esac
-    done
-    IFS=$ac_save_IFS
-    $1=$__new
-  fi
-])
-
-dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given
-AC_DEFUN(AC_VALIDIFY_CXXFLAGS,
-[dnl
-if test "x$kde_use_qt_emb" != "xyes"; then
- AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath])
- AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath])
-else
- AC_REMOVE_FORBIDDEN(CXX, [-rpath])
- AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath])
-fi
-])
-
-AC_DEFUN(AC_CHECK_COMPILERS,
-[
-  AC_ARG_ENABLE(debug,[  --enable-debug[=ARG]    enables debug symbols (yes|no|full) [default=no]],
-  [
-    case $enableval in
-      yes)
-        kde_use_debug_code="yes"
-        kde_use_debug_define=no
-        ;;
-      full)
-        kde_use_debug_code="full"
-        kde_use_debug_define=no
-        ;;
-      *)
-        kde_use_debug_code="no"
-        kde_use_debug_define=yes
-        ;;
-    esac
-  ], 
-    [kde_use_debug_code="no"
-      kde_use_debug_define=no
-  ])
-
-  dnl Just for configure --help
-  AC_ARG_ENABLE(dummyoption,[  --disable-debug         disables debug output and debug symbols [default=no]],[],[])
-
-  AC_ARG_ENABLE(strict,[  --enable-strict         compiles with strict compiler options (may not work!)],
-   [
-    if test $enableval = "no"; then
-         kde_use_strict_options="no"
-       else
-         kde_use_strict_options="yes"
-    fi
-   ], [kde_use_strict_options="no"])
-
-  AC_ARG_ENABLE(warnings,[  --disable-warnings      disables compilation with -Wall and similiar],
-   [
-    if test $enableval = "no"; then
-         kde_use_warnings="no"
-       else
-         kde_use_warnings="yes"
-    fi
-   ], [kde_use_warnings="yes"])
-
-  dnl enable warnings for debug build
-  if test "$kde_use_debug_code" != "no"; then
-    kde_use_warnings=yes
-  fi
-
-  AC_ARG_ENABLE(profile,[  --enable-profile        creates profiling infos [default=no]],
-    [kde_use_profiling=$enableval],
-    [kde_use_profiling="no"]
-  )
-
-  dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS
-  CFLAGS=" $CFLAGS"
-
-  AC_PROG_CC 
-
-  AC_PROG_CPP
-
-  if test "$GCC" = "yes"; then
-    if test "$kde_use_debug_code" != "no"; then
-      if test $kde_use_debug_code = "full"; then
-        CFLAGS="-g3 $CFLAGS"
-      else
-        CFLAGS="-g -O2 $CFLAGS"
-      fi
-    else
-      CFLAGS="-O2 $CFLAGS"
-    fi
-  fi
-
-  if test "$kde_use_debug_define" = "yes"; then
-    CFLAGS="-DNDEBUG $CFLAGS"
-  fi
-
-
-  case "$host" in
-  *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";;
-  *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";;
-  esac
-
-  if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
-     LDFLAGS=""
-  fi
-
-  CXXFLAGS=" $CXXFLAGS"
-
-  AC_PROG_CXX
-
-  if test "$GXX" = "yes" || test "$CXX" = "KCC"; then
-    if test "$kde_use_debug_code" != "no"; then
-      if test "$CXX" = "KCC"; then
-        CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
-      else
-        if test "$kde_use_debug_code" = "full"; then
-          CXXFLAGS="-g3 $CXXFLAGS"
-        else
-          CXXFLAGS="-g -O2 $CXXFLAGS"
-        fi
-      fi
-      KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"])
-
-      dnl convenience compiler flags
-      KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""])
-      AC_SUBST(WOVERLOADED_VIRTUAL)
-    else
-      if test "$CXX" = "KCC"; then
-        CXXFLAGS="+K3 $CXXFLAGS"
-      else
-        CXXFLAGS="-O2 $CXXFLAGS"
-      fi  
-    fi
-  fi
-
-  if test "$kde_use_debug_define" = "yes"; then
-    CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS"
-  fi  
-
-  if test "$kde_use_profiling" = "yes"; then
-    KDE_CHECK_COMPILER_FLAG(pg,
-    [
-      CFLAGS="-pg $CFLAGS"
-      CXXFLAGS="-pg $CXXFLAGS"
-    ])
-  fi
-
-  if test "$kde_use_warnings" = "yes"; then
-      if test "$GCC" = "yes"; then
-        case $host in
-          *-*-linux-gnu)	
-            CFLAGS="-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS"
-            CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS"
-            KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"; CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"])
-          ;;
-        esac
-        CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
-        KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"])
-        KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"])
-        KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"])
-     fi
-  fi
-
-  if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then
-    CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS"
-  fi
-    
-  if test "$GXX" = "yes"; then
-    KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"])
-    KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"])
-    KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"])
-    KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS=	)
-  fi
-  if test "$CXX" = "KCC"; then
-    dnl unfortunately we currently cannot disable exception support in KCC
-    dnl because doing so is binary incompatible and Qt by default links with exceptions :-(
-    dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"])
-    dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS=	)
-
-    AC_ARG_ENABLE(pch,[  --enable-pch            enables precompiled header support (currently only KCC) [default=no]],
-    [
-      kde_use_pch=$enableval
-    ],[kde_use_pch=no])
- 
-    if test "$kde_use_pch" = "yes"; then
-      dnl TODO: support --pch-dir!
-      KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"])
-      dnl the below works (but the dir must exist), but it's
-      dnl useless for a whole package.
-      dnl The are precompiled headers for each source file, so when compiling
-      dnl from scratch, it doesn't make a difference, and they take up
-      dnl around ~5Mb _per_ sourcefile.
-      dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp,
-      dnl   [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"])
-    fi
-    dnl this flag controls inlining. by default KCC inlines in optimisation mode
-    dnl all implementations that are defined inside the class {} declaration. 
-    dnl because of templates-compatibility with broken gcc compilers, this
-    dnl can cause excessive inlining. This flag limits it to a sane level
-    KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"])
-    KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"])
-    KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"])
-    KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"])
-    dnl Some source files are shared between multiple executables
-    dnl (or libraries) and some of those need template instantiations.
-    dnl In that case KCC needs to compile those sources with
-    dnl --one_instantiation_per_object.  To make it easy for us we compile
-    dnl _all_ objects with that flag (--one_per is a shorthand).
-    KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"])
-  fi
-  AC_SUBST(USE_EXCEPTIONS)
-  dnl obsolete macro - provided to keep things going
-  USE_RTTI=
-  AC_SUBST(USE_RTTI)
-
-  case "$host" in
-      *-*-irix*)  test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;;
-      *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";;
-      *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";;
-      *-*-solaris*) 
-        if test "$GXX" = yes; then
-          libstdcpp=`$CXX -print-file-name=libstdc++.so`
-          if test ! -f $libstdcpp; then
-             AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so])
-          fi
-        fi
-        ;;
-  esac
-
-  AC_VALIDIFY_CXXFLAGS
-
-  AC_PROG_CXXCPP
-
-  if test "$GCC" = yes; then
-     NOOPT_CFLAGS=-O0
-  fi
-  KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0])
-
-  AC_SUBST(NOOPT_CXXFLAGS)
-  AC_SUBST(NOOPT_CFLAGS)
-
-  KDE_CHECK_FINAL
-  KDE_CHECK_CLOSURE
-  KDE_CHECK_NMCHECK
-
-  ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), [])
-])
-
-AC_DEFUN(KDE_ADD_DEPENDENCIES,
-[
-   [A]M_DEPENDENCIES(CC)
-   [A]M_DEPENDENCIES(CXX)
-])
-
-dnl just a wrapper to clean up configure.in
-AC_DEFUN(KDE_PROG_LIBTOOL,
-[
-AC_REQUIRE([AC_CHECK_COMPILERS])
-AC_REQUIRE([AC_ENABLE_SHARED])
-AC_REQUIRE([AC_ENABLE_STATIC])
-
-AC_REQUIRE([AC_LIBTOOL_DLOPEN])
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_LANG_SAVE
-AC_LANG_C
-AC_OBJEXT
-AC_EXEEXT
-AC_LANG_RESTORE
-
-AM_PROG_LIBTOOL
-AC_LIBTOOL_CXX
-
-LIBTOOL_SHELL="/bin/sh ./libtool"
-#  LIBTOOL="$LIBTOOL --silent"
-KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)"
-AC_SUBST(KDE_PLUGIN)
-
-AC_ARG_ENABLE(objprelink, [  --enable-objprelink     prelink apps using objprelink (obsolete)],
-       kde_use_objprelink=$enableval, kde_use_objprelink=no)
-  if test "x$kde_use_objprelink" = "xyes"; then 
-        AC_MSG_WARN([
-------------------------------------------------------------
-Configuration option --enable-objprelink is no longer useful.
-See http:://objprelink.sourceforge.net for details:
-1- Recent binutils are fast enough to do without objprelink.
-2- Newer versions of objprelink do not need this option.
-------------------------------------------------------------
-])
-  fi
-])
-
-AC_DEFUN(KDE_CHECK_LIB64,
-[
-    tdelibsuff=none
-    AC_ARG_ENABLE(libsuffix,
-        AC_HELP_STRING([--enable-libsuffix],
-            [/lib directory suffix (64,32,none[=default])]),
-            tdelibsuff=$enableval)
-    # TODO: add an auto case that compiles a little C app to check
-    # where the glibc is
-    if test "$tdelibsuff" = "none"; then
-       tdelibsuff=
-    fi
-    if test -z "$tdelibsuff"; then
-        AC_MSG_RESULT([not using lib directory suffix])
-        AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories)
-    else
-        if test "$libdir" = '${exec_prefix}/lib'; then
-            libdir="$libdir${tdelibsuff}"
-            AC_SUBST([libdir], ["$libdir"])  dnl ugly hack for lib64 platforms
-        fi
-        AC_DEFINE_UNQUOTED(KDELIBSUFF, ["\"${tdelibsuff}\""], Suffix for lib directories)
-        AC_MSG_RESULT([using lib directory suffix $tdelibsuff])
-    fi
-])
-
-AC_DEFUN(KDE_CHECK_TYPES,
-[  AC_CHECK_SIZEOF(int, 4)dnl
-  AC_CHECK_SIZEOF(long, 4)dnl
-  AC_CHECK_SIZEOF(char *, 4)dnl
-])dnl
-
-AC_DEFUN(KDE_DO_IT_ALL,
-[
-AC_CANONICAL_SYSTEM
-AC_ARG_PROGRAM
-AM_INIT_AUTOMAKE($1, $2)
-AM_DISABLE_LIBRARIES
-AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde})
-AC_CHECK_COMPILERS
-KDE_PROG_LIBTOOL
-AM_KDE_WITH_NLS
-AC_PATH_KDE
-])
-
-AC_DEFUN(AC_CHECK_RPATH,
-[
-AC_MSG_CHECKING(for rpath)
-AC_ARG_ENABLE(rpath,
-      [  --disable-rpath         do not use the rpath feature of ld],
-      USE_RPATH=$enableval, USE_RPATH=yes)
-
-if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
-
-  KDE_RPATH="-R \$(kde_libraries)"
-
-  if test -n "$qt_libraries"; then
-    KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
-  fi
-  dnl $x_libraries is set to /usr/lib in case
-  if test -n "$X_LDFLAGS"; then
-    X_RPATH="-R \$(x_libraries)" 
-    KDE_RPATH="$KDE_RPATH $X_RPATH"
-  fi
-  if test -n "$KDE_EXTRA_RPATH"; then
-    KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
-  fi
-fi
-AC_SUBST(KDE_EXTRA_RPATH)
-AC_SUBST(KDE_RPATH)
-AC_SUBST(X_RPATH)
-AC_MSG_RESULT($USE_RPATH)
-])
-
-dnl Check for the type of the third argument of getsockname
-AC_DEFUN(AC_CHECK_SOCKLEN_T, [
-  AC_MSG_CHECKING(for socklen_t)
-  AC_CACHE_VAL(ac_cv_socklen_t, [
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <sys/socket.h>
-      ],[
-socklen_t a=0;
-getsockname(0,(struct sockaddr*)0, &a);
-      ],
-      ac_cv_socklen_t=socklen_t,
-      AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <sys/socket.h>
-        ],[
-int a=0;
-getsockname(0,(struct sockaddr*)0, &a);
-        ],
-        ac_cv_socklen_t=int,
-        ac_cv_socklen_t=size_t
-      )
-    )
-    AC_LANG_RESTORE
-  ])
-
-  AC_MSG_RESULT($ac_cv_socklen_t)
-  if test "$ac_cv_socklen_t" != "socklen_t"; then
-    AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t,
-        [Define the real type of socklen_t])
-  fi
-  AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define])
-
-])
-
-dnl This is a merge of some macros out of the gettext aclocal.m4
-dnl since we don't need anything, I took the things we need
-dnl the copyright for them is:
-dnl >
-dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-dnl This Makefile.in is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-dnl >
-dnl for this file it is relicensed under LGPL
-
-AC_DEFUN(AM_KDE_WITH_NLS,
-  [
-    dnl If we use NLS figure out what method
-
-    AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt,
-        [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt)
-    AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-
-     if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
-        AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it])
-        GMSGFMT=":"
-      fi
-      MSGFMT=$GMSGFMT
-      AC_SUBST(GMSGFMT)
-      AC_SUBST(MSGFMT)
-
-      AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext,
-	[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext programs is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-     AC_SUBST(XGETTEXT)
-
-  ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-# serial 1
-# Stephan Kulow: I appended a _KDE against name conflicts
-
-dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES])
-    fi
-  fi])
-
-dnl From Jim Meyering.
-dnl FIXME: migrate into libit.
-
-AC_DEFUN([AM_FUNC_OBSTACK],
-[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack,
- [AC_TRY_LINK([#include "obstack.h"],
-	      [struct obstack *mem;obstack_free(mem,(char *) 0)],
-	      am_cv_func_obstack=yes,
-	      am_cv_func_obstack=no)])
- if test $am_cv_func_obstack = yes; then
-   AC_DEFINE(HAVE_OBSTACK)
- else
-   LIBOBJS="$LIBOBJS obstack.o"
- fi
-])
-
-dnl From Jim Meyering.  Use this if you use the GNU error.[ch].
-dnl FIXME: Migrate into libit
-
-AC_DEFUN([AM_FUNC_ERROR_AT_LINE],
-[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line,
- [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");],
-              am_cv_lib_error_at_line=yes,
-	      am_cv_lib_error_at_line=no)])
- if test $am_cv_lib_error_at_line = no; then
-   LIBOBJS="$LIBOBJS error.o"
- fi
- AC_SUBST(LIBOBJS)dnl
-])
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-# Stephan Kulow: I put a KDE in it to avoid name conflicts
-
-AC_DEFUN(AM_KDE_GNU_GETTEXT,
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-   AC_REQUIRE([AM_KDE_WITH_NLS])dnl
-   AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
-   AC_MSG_CHECKING(for stpcpy)
-   AC_CACHE_VAL(kde_cv_func_stpcpy,
-   [
-   kde_safe_cxxflags=$CXXFLAGS
-   CXXFLAGS="-Werror"
-   AC_LANG_SAVE
-   AC_LANG_CPLUSPLUS
-   AC_TRY_COMPILE([
-   #include <string.h>
-   ],
-   [
-   char buffer[200];
-   stpcpy(buffer, buffer);
-   ],
-   kde_cv_func_stpcpy=yes,
-   kde_cv_func_stpcpy=no)
-   AC_LANG_RESTORE
-   CXXFLAGS=$kde_safe_cxxflags
-   ])
-   AC_MSG_RESULT($kde_cv_func_stpcpy)
-   if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then
-     AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy])
-   fi
-
-   AM_LC_MESSAGES
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-  ])
-
-AC_DEFUN(AC_HAVE_XPM,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$XPM_LDFLAGS" && XPM_LDFLAGS=
- test -z "$XPM_INCLUDE" && XPM_INCLUDE=
-
- AC_ARG_WITH(xpm, [  --without-xpm           disable color pixmap XPM tests],
-	xpm_test=$withval, xpm_test="yes")
- if test "x$xpm_test" = xno; then
-   ac_cv_have_xpm=no
- else
-   AC_MSG_CHECKING(for XPM)
-   AC_CACHE_VAL(ac_cv_have_xpm,
-   [
-    AC_LANG_C
-    ac_save_ldflags="$LDFLAGS"
-    ac_save_cflags="$CFLAGS"
-    if test "x$kde_use_qt_emb" != "xyes"; then
-      LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET"
-    else
-      LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET"
-    fi
-    CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES"
-    test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS"
-    AC_TRY_LINK([#include <X11/xpm.h>],[],
-	ac_cv_have_xpm="yes",ac_cv_have_xpm="no")
-    LDFLAGS="$ac_save_ldflags"
-    CFLAGS="$ac_save_cflags"
-   ])dnl
-
-  if test "$ac_cv_have_xpm" = no; then
-    AC_MSG_RESULT(no)
-    XPM_LDFLAGS=""
-    XPMINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support])
-    if test "$XPM_LDFLAGS" = ""; then
-       XPMLIB='-lXpm $(LIB_X11)'
-    else
-       XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)'
-    fi
-    if test "$XPM_INCLUDE" = ""; then
-       XPMINC=""
-    else
-       XPMINC="-I$XPM_INCLUDE"
-    fi
-    AC_MSG_RESULT(yes)
-    $1
-  fi
- fi
- AC_SUBST(XPMINC)
- AC_SUBST(XPMLIB)
-])
-
-AC_DEFUN(AC_HAVE_DPMS,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS=
- test -z "$DPMS_INCLUDE" && DPMS_INCLUDE=
- DPMS_LIB=
-
- AC_ARG_WITH(dpms, [  --without-dpms          disable DPMS power saving],
-	dpms_test=$withval, dpms_test="yes")
- if test "x$dpms_test" = xno; then
-   ac_cv_have_dpms=no
- else
-   AC_MSG_CHECKING(for DPMS)
-   dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms.
-   dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms".
-   AC_CACHE_VAL(ac_cv_have_dpms,
-   [
-    if test "x$kde_use_qt_emb" = "xyes"; then
-      AC_MSG_RESULT(no)
-      ac_cv_have_dpms="no"
-    else
-      AC_LANG_C
-      ac_save_ldflags="$LDFLAGS"
-      ac_save_cflags="$CFLAGS"
-      ac_save_libs="$LIBS"
-      LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
-      CFLAGS="$CFLAGS $X_INCLUDES"
-      test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
-      AC_TRY_LINK([
-	  #include <X11/Xproto.h>
-	  #include <X11/X.h>
-	  #include <X11/Xlib.h>
-	  #include <X11/extensions/dpms.h>
-	  int foo_test_dpms()
-	  { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
-	  ac_cv_have_dpms="yes", [
-              LDFLAGS="$ac_save_ldflags"
-              CFLAGS="$ac_save_cflags"
-              LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
-              LIBS="$LIBS -lXdpms"
-              CFLAGS="$CFLAGS $X_INCLUDES"
-              test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
-              AC_TRY_LINK([
-	          #include <X11/Xproto.h>
-        	  #include <X11/X.h>
-        	  #include <X11/Xlib.h>
-        	  #include <X11/extensions/dpms.h>
-        	  int foo_test_dpms()
-        	  { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
-        	  [
-                  ac_cv_have_dpms="-lXdpms"
-                  ],ac_cv_have_dpms="no")
-              ])
-      LDFLAGS="$ac_save_ldflags"
-      CFLAGS="$ac_save_cflags"
-      LIBS="$ac_save_libs"
-    fi
-   ])dnl
-
-  if test "$ac_cv_have_dpms" = no; then
-    AC_MSG_RESULT(no)
-    DPMS_LDFLAGS=""
-    DPMSINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support])
-    if test "$ac_cv_have_dpms" = "-lXdpms"; then
-       DPMS_LIB="-lXdpms"
-    fi
-    if test "$DPMS_LDFLAGS" = ""; then
-       DPMSLIB="$DPMS_LIB "'$(LIB_X11)'
-    else
-       DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)'
-    fi
-    if test "$DPMS_INCLUDE" = ""; then
-       DPMSINC=""
-    else
-       DPMSINC="-I$DPMS_INCLUDE"
-    fi
-    AC_MSG_RESULT(yes)
-    $1
-  fi
- fi
- AC_SUBST(DPMSINC)
- AC_SUBST(DPMSLIB)
-])
-
-AC_DEFUN(AC_HAVE_GL,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$GL_LDFLAGS" && GL_LDFLAGS=
- test -z "$GL_INCLUDE" && GL_INCLUDE=
-
- AC_ARG_WITH(gl, [  --without-gl            disable 3D GL modes],
-	gl_test=$withval, gl_test="yes")
- if test "x$kde_use_qt_emb" = "xyes"; then
-   # GL and Qt Embedded is a no-go for now.
-   ac_cv_have_gl=no
- elif test "x$gl_test" = xno; then
-   ac_cv_have_gl=no
- else
-   AC_MSG_CHECKING(for GL)
-   AC_CACHE_VAL(ac_cv_have_gl,
-   [
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_save_ldflags="$LDFLAGS"
-    ac_save_cxxflags="$CXXFLAGS"
-    LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU"
-    test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11"
-    LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET"
-    CXXFLAGS="$CFLAGS $X_INCLUDES"
-    test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
-    AC_TRY_LINK([#include <GL/gl.h>
-#include <GL/glu.h>
-], [],
-	ac_cv_have_gl="mesa", ac_cv_have_gl="no")
-    if test "x$ac_cv_have_gl" = "xno"; then
-      LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGLU -lGL"
-      test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11"
-      LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET"
-      CXXFLAGS="$ac_save_cflags $X_INCLUDES"
-      test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
-      AC_TRY_LINK([#include <GL/gl.h>
-#include <GL/glu.h>
-], [],
-	  ac_cv_have_gl="yes", ac_cv_have_gl="no")
-    fi
-    AC_LANG_RESTORE
-    LDFLAGS="$ac_save_ldflags"
-    CXXFLAGS="$ac_save_cxxflags"
-   ])dnl
-
-  if test "$ac_cv_have_gl" = "no"; then
-    AC_MSG_RESULT(no)
-    GL_LDFLAGS=""
-    GLINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)])
-    if test "$GL_LDFLAGS" = ""; then
-       if test "$ac_cv_have_gl" = "mesa"; then
-          GLLIB='-lMesaGLU -lMesaGL $(LIB_X11)'
-       else
-          GLLIB='-lGLU -lGL $(LIB_X11)'
-       fi
-    else
-       if test "$ac_cv_have_gl" = "mesa"; then
-          GLLIB="$GL_LDFLAGS -lMesaGLU -lMesaGL "'$(LIB_X11)'
-       else
-          GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)'
-       fi
-    fi
-    if test "$GL_INCLUDE" = ""; then
-       GLINC=""
-    else
-       GLINC="-I$GL_INCLUDE"
-    fi
-    AC_MSG_RESULT($ac_cv_have_gl)
-    $1
-  fi
- fi
- AC_SUBST(GLINC)
- AC_SUBST(GLLIB)
-])
-
-
- dnl shadow password and PAM magic - maintained by ossi@kde.org
-
-AC_DEFUN(KDE_PAM, [
-  AC_REQUIRE([KDE_CHECK_LIBDL])
-
-  AC_ARG_WITH(pam,
-    [  --with-pam[=ARG]        enable support for PAM: ARG=[yes|no|service name]],
-    [ if test "x$withval" = "xyes"; then
-        use_pam=yes
-        pam_service=kde
-      elif test "x$withval" = "xno"; then
-        use_pam=no
-      else
-        use_pam=yes
-        pam_service=$withval
-      fi
-      ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service"
-    ], [
-      AC_CACHE_VAL(ac_cv_path_pam,
-        [ use_pam=no
-          AC_CHECK_LIB(pam, pam_start,
-            [ AC_CHECK_HEADER(security/pam_appl.h,
-                [ use_pam=yes
-                  pam_service=kde ]) 
-            ], , $LIBDL)
-          ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service"
-        ])
-    ])
-  eval "$ac_cv_path_pam"
-
-  AC_MSG_CHECKING(for PAM)
-  if test "x$use_pam" = xno; then
-    AC_MSG_RESULT(no)
-    PAMLIBS=""
-  else
-    AC_MSG_RESULT(yes)
-    AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)])
-    PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL"
-
-    dnl test whether struct pam_message is const (Linux) or not (Sun)
-    AC_MSG_CHECKING(for const pam_message)
-    AC_EGREP_HEADER([struct pam_message], security/pam_appl.h,
-      [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h,
-                        [AC_MSG_RESULT([const: Linux-type PAM])],
-                        [AC_MSG_RESULT([nonconst: Sun-type PAM])
-                        AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])]
-                        )],
-      [AC_MSG_RESULT([not found - assume const, Linux-type PAM])])
-  fi
-
-  AC_SUBST(PAMLIBS)
-])
-
-dnl DEF_PAM_SERVICE(arg name, full name, define name)
-AC_DEFUN(DEF_PAM_SERVICE, [
-  AC_ARG_WITH($1-pam,
-    [  --with-$1-pam=[val]    override PAM service from --with-pam for $2],
-    [ if test "x$use_pam" = xyes; then
-        $3_PAM_SERVICE="$withval"
-      else
-        AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected.
-You may want to enforce it by using --with-pam.])
-      fi
-    ], 
-    [ if test "x$use_pam" = xyes; then
-        $3_PAM_SERVICE="$pam_service"
-      fi
-    ])
-    if test -n "$$3_PAM_SERVICE"; then
-      AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE])
-      AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2])
-    fi
-    AC_SUBST($3_PAM_SERVICE)
-])
-
-AC_DEFUN(KDE_SHADOWPASSWD, [
-  AC_REQUIRE([KDE_PAM])
-
-  AC_CHECK_LIB(shadow, getspent,
-    [ LIBSHADOW="-lshadow"
-      ac_use_shadow=yes
-    ],
-    [ dnl for UnixWare
-      AC_CHECK_LIB(gen, getspent, 
-        [ LIBGEN="-lgen"
-          ac_use_shadow=yes
-        ], 
-        [ AC_CHECK_FUNC(getspent, 
-            [ ac_use_shadow=yes ],
-            [ ac_use_shadow=no ])
-	])
-    ])
-  AC_SUBST(LIBSHADOW)
-  AC_SUBST(LIBGEN)
-  
-  AC_MSG_CHECKING([for shadow passwords])
-
-  AC_ARG_WITH(shadow,
-    [  --with-shadow		  If you want shadow password support ],
-    [ if test "x$withval" != "xno"; then
-        use_shadow=yes
-      else
-        use_shadow=no
-      fi
-    ], [
-      use_shadow="$ac_use_shadow"
-    ])
-
-  if test "x$use_shadow" = xyes; then
-    AC_MSG_RESULT(yes)
-    AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords])
-  else
-    AC_MSG_RESULT(no)
-    LIBSHADOW=
-    LIBGEN=
-  fi
-
-  dnl finally make the relevant binaries setuid root, if we have shadow passwds.
-  dnl this still applies, if we could use it indirectly through pam.
-  if test "x$use_shadow" = xyes || 
-     ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then
-      case $host in
-      *-*-freebsd* | *-*-netbsd* | *-*-openbsd*)
-	SETUIDFLAGS="-m 4755 -o root";;
-      *)
-	SETUIDFLAGS="-m 4755";;
-      esac
-  fi
-  AC_SUBST(SETUIDFLAGS)
-
-])
-
-AC_DEFUN(KDE_PASSWDLIBS, [
-  AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT
-  AC_REQUIRE([KDE_PAM])
-  AC_REQUIRE([KDE_SHADOWPASSWD])
-
-  if test "x$use_pam" = "xyes"; then 
-    PASSWDLIBS="$PAMLIBS"
-  else
-    PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN"
-  fi
-
-  dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but
-  dnl /etc/master.passwd holds the actual passwords.  /etc/master.passwd requires
-  dnl root to read, so kcheckpass needs to be root (even when using pam, since pam
-  dnl may need to read /etc/master.passwd).
-  case $host in
-  *-*-freebsd*)
-    SETUIDFLAGS="-m 4755 -o root"
-    ;;
-  *)
-    ;;
-  esac
-
-  AC_SUBST(PASSWDLIBS)
-])
-
-AC_DEFUN(KDE_CHECK_LIBDL,
-[
-AC_CHECK_LIB(dl, dlopen, [
-LIBDL="-ldl"
-ac_cv_have_dlfcn=yes
-])
-
-AC_CHECK_LIB(dld, shl_unload, [
-LIBDL="-ldld"
-ac_cv_have_shload=yes
-])
-
-AC_SUBST(LIBDL)
-])
-
-AC_DEFUN(KDE_CHECK_DLOPEN,
-[
-KDE_CHECK_LIBDL
-AC_CHECK_HEADERS(dlfcn.h dl.h)
-if test "$ac_cv_header_dlfcn_h" = "no"; then
-  ac_cv_have_dlfcn=no
-fi
-
-if test "$ac_cv_header_dl_h" = "no"; then
-  ac_cv_have_shload=no
-fi
-
-dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE
-dnl (MM)
-AC_ARG_ENABLE(dlopen,
-[  --disable-dlopen        link statically [default=no]] ,
-enable_dlopen=$enableval,
-enable_dlopen=yes)
-
-# override the user's opinion, if we know it better ;)
-if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then
-  enable_dlopen=no
-fi
-
-if test "$ac_cv_have_dlfcn" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn])
-fi
-
-if test "$ac_cv_have_shload" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload])
-fi
-
-if test "$enable_dlopen" = no ; then
-  test -n "$1" && eval $1
-else
-  test -n "$2" && eval $2
-fi
-
-])
-
-AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING,
-[
-KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no)
-KDE_PROG_LIBTOOL
-AC_MSG_CHECKING([dynamic loading])
-eval "`egrep '^build_libtool_libs=' libtool`"
-if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then
-  dynamic_loading=yes
-  AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING)
-else
-  dynamic_loading=no
-fi
-AC_MSG_RESULT($dynamic_loading)
-if test "$dynamic_loading" = "yes"; then
-  $1
-else
-  $2
-fi
-])
-
-AC_DEFUN(KDE_ADD_INCLUDES,
-[
-if test -z "$1"; then
-  test_include="Pix.h"
-else
-  test_include="$1"
-fi
-
-AC_MSG_CHECKING([for libg++ ($test_include)])
-
-AC_CACHE_VAL(kde_cv_libgpp_includes,
-[
-kde_cv_libgpp_includes=no
-
-   for ac_dir in               \
-                               \
-     /usr/include/g++          \
-     /usr/include              \
-     /usr/unsupported/include  \
-     /opt/include              \
-     $extra_include            \
-     ; \
-   do
-     if test -r "$ac_dir/$test_include"; then
-       kde_cv_libgpp_includes=$ac_dir
-       break
-     fi
-   done
-])
-
-AC_MSG_RESULT($kde_cv_libgpp_includes)
-if test "$kde_cv_libgpp_includes" != "no"; then
-  all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES"
-fi
-])
-])
-
-
-AC_DEFUN(KDE_CHECK_MICO,
-[
-AC_REQUIRE([KDE_CHECK_LIBDL])
-AC_REQUIRE([KDE_MISC_TESTS])
-AC_MSG_CHECKING(for MICO)
-
-if test -z "$MICODIR"; then
-    kde_micodir=/usr/local
- else
-    kde_micodir="$MICODIR"
-fi
-
-AC_ARG_WITH(micodir,
-  [  --with-micodir=micodir  where mico is installed ],
-  kde_micodir=$withval,
-  kde_micodir=$kde_micodir
-)
-
-AC_CACHE_VAL(kde_cv_mico_incdir,
-[
-  mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
-AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
-
-])
-kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
-
-if test ! -r  $kde_micodir/include/CORBA.h; then
-  AC_MSG_ERROR([No CORBA.h found, specify another micodir])
-fi
-
-AC_MSG_RESULT($kde_micodir)
-
-MICO_INCLUDES=-I$kde_micodir/include
-AC_SUBST(MICO_INCLUDES)
-MICO_LDFLAGS=-L$kde_micodir/lib
-AC_SUBST(MICO_LDFLAGS)
-micodir=$kde_micodir
-AC_SUBST(micodir)
-
-AC_MSG_CHECKING([for MICO version])
-AC_CACHE_VAL(kde_cv_mico_version,
-[
-AC_LANG_C
-cat >conftest.$ac_ext <<EOF
-#include <stdio.h>
-#include <mico/version.h>
-int main() {
-
-   printf("MICO_VERSION=%s\n",MICO_VERSION);
-   return (0);
-}
-EOF
-ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
-if AC_TRY_EVAL(ac_compile); then
-  if eval `./conftest 2>&5`; then
-    kde_cv_mico_version=$MICO_VERSION
-  else
-    AC_MSG_ERROR([your system is not able to execute a small application to
-    find MICO version! Check $kde_micodir/include/mico/version.h])
-  fi
-else
-  AC_MSG_ERROR([your system is not able to compile a small application to
-  find MICO version! Check $kde_micodir/include/mico/version.h])
-fi
-])
-
-dnl installed MICO version
-mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
-mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
-mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
-
-if test "x$1" = "x"; then
- req_version="2.3.0"
-else
- req_version=$1
-fi
-
-dnl required MICO version
-req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
-req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
-req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
-
-if test "$mico_v_maj" -lt "$req_v_maj" || \
-   ( test "$mico_v_maj" -eq "$req_v_maj" && \
-        test "$mico_v_mid" -lt "$req_v_mid" ) || \
-   ( test "$mico_v_mid" -eq "$req_v_mid" && \
-        test "$mico_v_min" -lt "$req_v_min" )
-
-then
-  AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
-at least is required. You should upgrade MICO.])
-else
-  AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
-fi
-
-LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
-AC_SUBST(LIBMICO)
-if test -z "$IDL"; then
-  IDL='$(kde_bindir)/cuteidl'
-fi
-AC_SUBST(IDL)
-IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
-AC_SUBST(IDL_DEPENDENCIES)
-
-idldir="\$(includedir)/idl"
-AC_SUBST(idldir)
-
-])
-
-AC_DEFUN(KDE_CHECK_MINI_STL,
-[
-AC_REQUIRE([KDE_CHECK_MICO])
-
-AC_MSG_CHECKING(if we use mico's mini-STL)
-AC_CACHE_VAL(kde_cv_have_mini_stl,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-kde_save_cxxflags="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
-AC_TRY_COMPILE(
-[
-#include <mico/config.h>
-],
-[
-#ifdef HAVE_MINI_STL
-#error "nothing"
-#endif
-],
-kde_cv_have_mini_stl=no,
-kde_cv_have_mini_stl=yes)
-CXXFLAGS="$kde_save_cxxflags"
-AC_LANG_RESTORE
-])
-
-if test "x$kde_cv_have_mini_stl" = "xyes"; then
-   AC_MSG_RESULT(yes)
-   $1
-else
-   AC_MSG_RESULT(no)
-   $2
-fi
-])
-
-])
-
-
-AC_DEFUN(KDE_CHECK_LIBPTHREAD,
-[
-AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] )
-AC_SUBST(LIBPTHREAD)
-])
-
-AC_DEFUN(KDE_CHECK_PTHREAD_OPTION,
-[
-    AC_ARG_ENABLE(kernel-threads, [  --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.],
-	kde_use_kernthreads=$enableval, kde_use_kernthreads=no)
-
-    if test "$kde_use_kernthreads" = "yes"; then
-      ac_save_CXXFLAGS="$CXXFLAGS"
-      ac_save_CFLAGS="$CFLAGS"
-      CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
-      CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
-      AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h)
-      CXXFLAGS="$ac_save_CXXFLAGS"
-      CFLAGS="$ac_save_CFLAGS"
-      if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
-        kde_use_kernthreads=no
-      else
-        dnl Add proper -I and -l statements
-        AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD
-        if test "x$LIBPTHREAD" = "x"; then
-          kde_use_kernthreads=no
-        else
-          USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
-        fi
-      fi
-    else 
-      USE_THREADS=""
-      if test -z "$LIBPTHREAD"; then
-        KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] )
-      fi
-    fi
-
-    AH_VERBATIM(__svr_define, [
-#if defined(__SVR4) && !defined(__svr4__)
-#define __svr4__ 1
-#endif
-])
-    case $host_os in
- 	solaris*)
-		KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"])
-                CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4"
-    		;;
-        freebsd*)
-                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
-                ;;
-        aix*)
-                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
-                LIBPTHREAD="$LIBPTHREAD -lc_r"
-                ;;
-        linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
-                if test "$CXX" = "KCC"; then
-                  CXXFLAGS="$CXXFLAGS --thread_safe"
-		  NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe"
-                fi
-                ;;
-	*)
-		;;
-    esac
-    AC_SUBST(USE_THREADS)
-    AC_SUBST(LIBPTHREAD)
-])
-
-AC_DEFUN(KDE_CHECK_THREADING,
-[
-  AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
-  AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION])
-  dnl default is yes if libpthread is found and no if no libpthread is available
-  if test -z "$LIBPTHREAD"; then
-    if test -z "$USE_THREADS"; then
-      kde_check_threading_default=no
-    else
-      kde_check_threading_default=yes
-    fi
-  else
-    kde_check_threading_default=yes
-  fi
-  AC_ARG_ENABLE(threading, [  --disable-threading     disables threading even if libpthread found ],
-   kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default)
-  if test "x$kde_use_threading" = "xyes"; then
-    AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)])
-  fi
-])
-
-AC_DEFUN(KDE_TRY_LINK_PYTHON,
-[
-if test "$kde_python_link_found" = no; then
-
-if test "$1" = normal; then
-  AC_MSG_CHECKING(if a Python application links)
-else
-  AC_MSG_CHECKING(if Python depends on $2)
-fi
-
-AC_CACHE_VAL(kde_cv_try_link_python_$1,
-[
-AC_LANG_SAVE
-AC_LANG_C
-kde_save_cflags="$CFLAGS"
-CFLAGS="$CFLAGS $PYTHONINC"
-kde_save_libs="$LIBS"
-LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET"
-kde_save_ldflags="$LDFLAGS"
-LDFLAGS="$LDFLAGS $PYTHONLIB"
-
-AC_TRY_LINK(
-[
-#include <Python.h>
-],[
-	PySys_SetArgv(1, 0);
-],
-	[kde_cv_try_link_python_$1=yes],
-	[kde_cv_try_link_python_$1=no]
-)
-CFLAGS="$kde_save_cflags"
-LIBS="$kde_save_libs"
-LDFLAGS="$kde_save_ldflags"
-])
-
-if test "$kde_cv_try_link_python_$1" = "yes"; then
-  AC_MSG_RESULT(yes)
-  kde_python_link_found=yes
-  if test ! "$1" = normal; then
-    LIBPYTHON="$LIBPYTHON $2"
-  fi
-  $3
-else
-  AC_MSG_RESULT(no)
-  $4
-fi
-AC_LANG_RESTORE
-
-fi
-
-])
-
-AC_DEFUN(KDE_CHECK_PYTHON_DIR,
-[
-AC_MSG_CHECKING([for Python directory])
- 
-AC_CACHE_VAL(kde_cv_pythondir,
-[
-  if test -z "$PYTHONDIR"; then
-    kde_cv_pythondir=/usr/local
-  else
-    kde_cv_pythondir="$PYTHONDIR"
-  fi
-])
- 
-AC_ARG_WITH(pythondir,
-[  --with-pythondir=pythondir   use python installed in pythondir ],
-[
-  ac_python_dir=$withval
-], ac_python_dir=$kde_cv_pythondir
-)
- 
-AC_MSG_RESULT($ac_python_dir)
-])
-
-AC_DEFUN(KDE_CHECK_PYTHON_INTERN,
-[
-AC_REQUIRE([KDE_CHECK_LIBDL])
-AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
-AC_REQUIRE([KDE_CHECK_PYTHON_DIR])
-
-if test -z "$1"; then
-  version="1.5"
-else
-  version="$1"
-fi
-
-AC_MSG_CHECKING([for Python$version])
-
-python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes"
-AC_FIND_FILE(Python.h, $python_incdirs, python_incdir)
-if test ! -r $python_incdir/Python.h; then
-  AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir)
-  python_incdir=$python_incdir/python$version
-  if test ! -r $python_incdir/Python.h; then
-    python_incdir=no
-  fi
-fi
-
-PYTHONINC=-I$python_incdir
-
-python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
-AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir)
-if test ! -r $python_libdir/libpython$version.a; then
-  AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir)
-  python_libdir=$python_libdir/python$version/config
-  if test ! -r $python_libdir/libpython$version.a; then
-    python_libdir=no
-  fi
-fi
-
-PYTHONLIB=-L$python_libdir
-kde_orig_LIBPYTHON=$LIBPYTHON
-if test -z "$LIBPYTHON"; then
-  LIBPYTHON=-lpython$version
-fi
-
-python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
-AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir)
-python_moddir=$python_moddir/python$version
-if test ! -r $python_moddir/copy.py; then
-  python_moddir=no
-fi
-
-PYTHONMODDIR=$python_moddir
-
-AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir)
-
-if test x$python_incdir = xno ||  test x$python_libdir = xno ||  test x$python_moddir = xno; then
-   LIBPYTHON=$kde_orig_LIBPYTHON
-   test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB=""
-   test "x$PYTHONINC" = "x-Ino" && PYTHONINC=""
-   $2
-else 
-  dnl Note: this test is very weak
-  kde_python_link_found=no
-  KDE_TRY_LINK_PYTHON(normal)
-  KDE_TRY_LINK_PYTHON(m, -lm)
-  KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD)
-  KDE_TRY_LINK_PYTHON(tcl, -ltcl)
-  KDE_TRY_LINK_PYTHON(db2, -ldb2)
-  KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil])
-  KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil])
-  KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm])
-  KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [],
-	[AC_MSG_WARN([it seems, Python depends on another library.
-    Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this
-    and contact the authors to let them know about this problem])
-	])
-
-  LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET"
-  AC_SUBST(PYTHONINC)
-  AC_SUBST(PYTHONLIB)
-  AC_SUBST(LIBPYTHON)
-  AC_SUBST(PYTHONMODDIR)
-  AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python])
-fi
-
-])
-
-
-AC_DEFUN(KDE_CHECK_PYTHON,
-[
-  KDE_CHECK_PYTHON_INTERN("2.3", 
-   [KDE_CHECK_PYTHON_INTERN("2.2", 
-     [KDE_CHECK_PYTHON_INTERN("2.1", 
-       [KDE_CHECK_PYTHON_INTERN("2.0", 
-         [KDE_CHECK_PYTHON_INTERN($1, $2) ])
-       ])
-     ])
-   ])
-])
-
-AC_DEFUN(KDE_CHECK_STL_SGI,
-[
-    AC_MSG_CHECKING([if STL implementation is SGI like])
-    AC_CACHE_VAL(kde_cv_stl_type_sgi,
-    [
-      AC_TRY_COMPILE([
-#include <string>
-using namespace std;
-],[
-  string astring="Hallo Welt.";
-  astring.erase(0, 6); // now astring is "Welt"
-  return 0;
-], kde_cv_stl_type_sgi=yes,
-   kde_cv_stl_type_sgi=no)
-])
-
-   AC_MSG_RESULT($kde_cv_stl_type_sgi)
-
-   if test "$kde_cv_stl_type_sgi" = "yes"; then
-	AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI])
-   fi
-])
-
-AC_DEFUN(KDE_CHECK_STL_HP,
-[
-    AC_MSG_CHECKING([if STL implementation is HP like])
-    AC_CACHE_VAL(kde_cv_stl_type_hp,
-    [
-      AC_TRY_COMPILE([
-#include <string>
-using namespace std;
-],[
-  string astring="Hello World";
-  astring.remove(0, 6); // now astring is "World"
-  return 0;
-], kde_cv_stl_type_hp=yes,
-   kde_cv_stl_type_hp=no)
-])
-   AC_MSG_RESULT($kde_cv_stl_type_hp)
-
-   if test "$kde_cv_stl_type_hp" = "yes"; then
-	AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP])
-   fi
-])
-
-AC_DEFUN(KDE_CHECK_STL,
-[
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_save_CXXFLAGS="$CXXFLAGS"
-    CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`"
-    KDE_CHECK_STL_SGI
-
-    if test "$kde_cv_stl_type_sgi" = "no"; then
-       KDE_CHECK_STL_HP
-
-       if test "$kde_cv_stl_type_hp" = "no"; then
-         AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?")
-       fi
-    fi
-
-    CXXFLAGS="$ac_save_CXXFLAGS"
-    AC_LANG_RESTORE
-])
-
-AC_DEFUN(AC_FIND_QIMGIO,
-   [AC_REQUIRE([AC_FIND_JPEG])
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_MSG_CHECKING([for qimgio])
-AC_CACHE_VAL(ac_cv_lib_qimgio,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_save_LIBS="$LIBS"
-ac_save_CXXFLAGS="$CXXFLAGS"
-LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT"
-CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
-AC_TRY_RUN(dnl
-[
-#include <qimageio.h>
-#include <ntqstring.h>
-int main() {
-		QString t = "hallo";
-		t.fill('t');
-		qInitImageIO();
-}
-],
-            ac_cv_lib_qimgio=yes,
-            ac_cv_lib_qimgio=no,
-	    ac_cv_lib_qimgio=no)
-LIBS="$ac_save_LIBS"
-CXXFLAGS="$ac_save_CXXFLAGS"
-AC_LANG_RESTORE
-])dnl
-if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then
-  LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG"
-  AC_MSG_RESULT(yes)
-  AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available])
-  AC_SUBST(LIBQIMGIO)
-else
-  AC_MSG_RESULT(not found)
-fi
-])
-
-AC_DEFUN(KDE_CHECK_ANSI,
-[
-])
-
-AC_DEFUN(KDE_CHECK_INSURE,
-[
-  AC_ARG_ENABLE(insure, [  --enable-insure             use insure++ for debugging [default=no]],
-  [
-  if test $enableval = "no"; dnl
-	then ac_use_insure="no"
-	else ac_use_insure="yes"
-   fi
-  ], [ac_use_insure="no"])
-
-  AC_MSG_CHECKING(if we will use Insure++ to debug)
-  AC_MSG_RESULT($ac_use_insure)
-  if test "$ac_use_insure" = "yes"; dnl
-       then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
-   fi
-])
-
-AC_DEFUN(AM_DISABLE_LIBRARIES,
-[
-    AC_PROVIDE([AM_ENABLE_STATIC])
-    AC_PROVIDE([AM_ENABLE_SHARED])
-    enable_static=no
-    enable_shared=yes
-])
-
-
-AC_DEFUN(AC_CHECK_UTMP_FILE,
-[
-    AC_MSG_CHECKING([for utmp file])
-
-    AC_CACHE_VAL(kde_cv_utmp_file,
-    [
-    kde_cv_utmp_file=no
-
-    for ac_file in    \
-                      \
-	/var/run/utmp \
-	/var/adm/utmp \
-	/etc/utmp     \
-     ; \
-    do
-     if test -r "$ac_file"; then
-       kde_cv_utmp_file=$ac_file
-       break
-     fi
-    done
-    ])
-
-    if test "$kde_cv_utmp_file" != "no"; then
-	AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries])
-	$1
-	AC_MSG_RESULT($kde_cv_utmp_file)
-    else
-    	$2
-	AC_MSG_RESULT([non found])
-    fi
-])
-
-
-AC_DEFUN(KDE_CREATE_SUBDIRSLIST,
-[
-
-DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
-
-if test ! -s $srcdir/subdirs; then
-  dnl Note: Makefile.common creates subdirs, so this is just a fallback
-  TOPSUBDIRS=""
-  files=`cd $srcdir && ls -1`
-  dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
-  for i in $dirs; do
-    echo $i >> $srcdir/subdirs
-  done
-fi
-
-if test -s $srcdir/inst-apps; then
-  ac_topsubdirs="`cat $srcdir/inst-apps`"
-else
-  ac_topsubdirs="`cat $srcdir/subdirs`"
-fi
-
-for i in $ac_topsubdirs; do
-  AC_MSG_CHECKING([if $i should be compiled])
-  if test -d $srcdir/$i; then
-    install_it="yes"
-    for j in $DO_NOT_COMPILE; do
-      if test $i = $j; then
-        install_it="no"
-      fi
-    done
-  else
-    install_it="no"
-  fi
-  AC_MSG_RESULT($install_it)
-  vari=`echo $i | sed -e 's,[[-+.]],_,g'`
-  if test $install_it = "yes"; then
-    TOPSUBDIRS="$TOPSUBDIRS $i"
-    eval "$vari""_SUBDIR_included=yes"
-  else
-    eval "$vari""_SUBDIR_included=no"
-  fi
-done
-
-AC_SUBST(TOPSUBDIRS)
-])
-
-AC_DEFUN(KDE_CHECK_NAMESPACES,
-[
-AC_MSG_CHECKING(whether C++ compiler supports namespaces)
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-AC_TRY_COMPILE([
-],
-[
-namespace Foo {
-  extern int i;
-  namespace Bar {
-    extern int i;
-  }
-}
-
-int Foo::i = 0;
-int Foo::Bar::i = 1;
-],[
-  AC_MSG_RESULT(yes)
-  AC_DEFINE(HAVE_NAMESPACES)
-], [
-AC_MSG_RESULT(no)
-])
-AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_NEWLIBS,
-[
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_CHECK_S_ISSOCK,
-[
-AC_MSG_CHECKING(for S_ISSOCK)
-AC_CACHE_VAL(ac_cv_have_s_issock,
-[
-AC_LANG_SAVE
-AC_LANG_C
-AC_TRY_LINK(
-[
-#include <sys/stat.h>
-],
-[
-struct stat buff;
-int b = S_ISSOCK( buff.st_mode );
-],
-ac_cv_have_s_issock=yes,
-ac_cv_have_s_issock=no)
-AC_LANG_RESTORE
-])
-AC_MSG_RESULT($ac_cv_have_s_issock)
-if test "$ac_cv_have_s_issock" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.])
-fi
-
-AH_VERBATIM(_ISSOCK,
-[
-#ifndef HAVE_S_ISSOCK
-#define HAVE_S_ISSOCK
-#define S_ISSOCK(mode) (1==0)
-#endif
-])
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_CHECK_KDEMAXPATHLEN,
-[
-AC_MSG_CHECKING(for MAXPATHLEN)
-AC_CACHE_VAL(ac_cv_maxpathlen,
-[
-AC_LANG_C
-cat > conftest.$ac_ext <<EOF
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-#include <sys/param.h>
-#ifndef MAXPATHLEN
-#define MAXPATHLEN 1024
-#endif
-
-KDE_HELLO MAXPATHLEN
-
-EOF
-
-ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out"
-
-if AC_TRY_EVAL(ac_try) && test -s conftest.out; then
-    ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out`
-else
-    ac_cv_maxpathlen=1024
-fi
-
-rm conftest.*
-
-])
-AC_MSG_RESULT($ac_cv_maxpathlen)
-AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] )
-])
-
-AC_DEFUN(KDE_CHECK_HEADER,
-[
-   AC_LANG_SAVE
-   kde_safe_cppflags=$CPPFLAGS
-   CPPFLAGS="$CPPFLAGS $all_includes"
-   AC_LANG_CPLUSPLUS
-   AC_CHECK_HEADER($1, $2, $3, $4)
-   CPPFLAGS=$kde_safe_cppflags
-   AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_HEADERS,
-[
-   AH_CHECK_HEADERS([$1])
-   AC_LANG_SAVE
-   kde_safe_cppflags=$CPPFLAGS
-   CPPFLAGS="$CPPFLAGS $all_includes"
-   AC_LANG_CPLUSPLUS
-   AC_CHECK_HEADERS([$1], [$2], [$3], [$4])
-   CPPFLAGS=$kde_safe_cppflags
-   AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_FAST_CONFIGURE,
-[
-  dnl makes configure fast (needs perl)
-  AC_ARG_ENABLE(fast-perl, [  --disable-fast-perl     disable fast Makefile generation (needs perl)],
-      with_fast_perl=$enableval, with_fast_perl=yes)
-])
-
-AC_DEFUN(KDE_CONF_FILES,
-[
-  val=
-  if test -f $srcdir/configure.files ; then
-    val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
-  fi
-  CONF_FILES=
-  if test -n "$val" ; then
-    for i in $val ; do
-      CONF_FILES="$CONF_FILES $i"
-    done
-  fi
-  AC_SUBST(CONF_FILES)
-])dnl
-
-AC_DEFUN(KDE_SET_PREFIX,
-[
-  unset CDPATH
-  dnl make $TDEDIR the default for the installation
-  AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde})
-
-  if test "x$prefix" = "xNONE"; then
-    prefix=$ac_default_prefix
-    ac_configure_args="$ac_configure_args --prefix=$prefix"
-  fi
-  # And delete superflous '/' to make compares easier
-  prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
-  exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
-  KDE_FAST_CONFIGURE
-  KDE_CONF_FILES
-])
-
-pushdef([AC_PROG_INSTALL],
-[
-  dnl our own version, testing for a -p flag
-  popdef([AC_PROG_INSTALL])
-  dnl as AC_PROG_INSTALL works as it works we first have
-  dnl to save if the user didn't specify INSTALL, as the
-  dnl autoconf one overwrites INSTALL and we have no chance to find
-  dnl out afterwards
-  test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
-  test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
-  test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
-  AC_PROG_INSTALL
-
-  if test -z "$kde_save_INSTALL_given" ; then
-    # OK, user hasn't given any INSTALL, autoconf found one for us
-    # now we test, if it supports the -p flag
-    AC_MSG_CHECKING(for -p flag to install)
-    rm -f confinst.$$.* > /dev/null 2>&1
-    echo "Testtest" > confinst.$$.orig
-    ac_res=no
-    if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
-      if test -f confinst.$$.new ; then
-        # OK, -p seems to do no harm to install
-	INSTALL="${INSTALL} -p"
-	ac_res=yes
-      fi
-    fi
-    rm -f confinst.$$.*
-    AC_MSG_RESULT($ac_res)
-  fi
-  dnl the following tries to resolve some signs and wonders coming up
-  dnl with different autoconf/automake versions
-  dnl e.g.:
-  dnl  *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s
-  dnl   and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS)
-  dnl   it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s
-  dnl  *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has
-  dnl   INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the
-  dnl   install-@DIR@PROGRAMS targets to explicitly use that flag
-  dnl  *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as
-  dnl   INSTALL_SCRIPT, which breaks with automake <= 1.4
-  dnl  *autoconf >2.13 (since 10.Apr 1999) has not that failure
-  dnl  *sometimes KDE does not use the install-@DIR@PROGRAM targets from
-  dnl   automake (due to broken Makefile.am or whatever) to install programs,
-  dnl   and so does not see the -s flag in automake > 1.4
-  dnl to clean up that mess we:
-  dnl  +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG
-  dnl   which cleans KDE's program with automake > 1.4;
-  dnl  +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems
-  dnl   with automake<=1.4
-  dnl  note that dues to this sometimes two '-s' flags are used (if KDE
-  dnl   properly uses install-@DIR@PROGRAMS, but I don't care
-  dnl
-  dnl And to all this comes, that I even can't write in comments variable
-  dnl  names used by automake, because it is so stupid to think I wanted to
-  dnl  _use_ them, therefor I have written A_M_... instead of AM_
-  dnl hmm, I wanted to say something ... ahh yes: Arghhh.
-
-  if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
-    INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
-  fi
-  if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
-    INSTALL_SCRIPT='${INSTALL}'
-  fi
-])dnl
-
-AC_DEFUN(KDE_LANG_CPLUSPLUS,
-[AC_LANG_CPLUSPLUS
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
-pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS])
-])
-
-pushdef([AC_LANG_CPLUSPLUS],
-[popdef([AC_LANG_CPLUSPLUS])
-KDE_LANG_CPLUSPLUS
-])
-
-AC_DEFUN(KDE_CHECK_LONG_LONG,
-[
-AC_MSG_CHECKING(for long long)
-AC_CACHE_VAL(kde_cv_c_long_long,
-[
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-  AC_TRY_LINK([], [
-  long long foo = 0;
-  foo = foo+1;
-  ],
-  kde_cv_c_long_long=yes, kde_cv_c_long_long=no)
-  AC_LANG_RESTORE
-])
-AC_MSG_RESULT($kde_cv_c_long_long)
-if test "$kde_cv_c_long_long" = yes; then
-   AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_LIB,
-[
-     kde_save_LDFLAGS="$LDFLAGS"
-     dnl AC_CHECK_LIB modifies LIBS, so save it here
-     kde_save_LIBS="$LIBS"
-     LDFLAGS="$LDFLAGS $all_libraries"
-     case $host_os in
-      aix*) LDFLAGS="-brtl $LDFLAGS"
-	test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS"
-	;;
-     esac
-     AC_CHECK_LIB($1, $2, $3, $4, $5)
-     LDFLAGS="$kde_save_LDFLAGS"
-     LIBS="$kde_save_LIBS"
-])
-
-AC_DEFUN(KDE_JAVA_PREFIX,
-[
-	dir=`dirname "$1"`
-	base=`basename "$1"`
-	list=`ls -1 $dir 2> /dev/null`
-	for entry in $list; do 
-		if test -d $dir/$entry/bin; then
-			case $entry in
-			   $base)
-				javadirs="$javadirs $dir/$entry/bin"
-				;;
-			esac
-		elif test -d $dir/$entry/jre/bin; then
-			case $entry in
-			   $base)
-				javadirs="$javadirs $dir/$entry/jre/bin"
-				;;
-			esac
-		fi
-	done
-])
-
-dnl KDE_CHEC_JAVA_DIR(onlyjre)
-AC_DEFUN(KDE_CHECK_JAVA_DIR,
-[
-
-AC_ARG_WITH(java,
-[  --with-java=javadir     use java installed in javadir, --without-java disables ],
-[  ac_java_dir=$withval
-], ac_java_dir=""
-)
-
-AC_MSG_CHECKING([for Java])
-
-dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH
-if test "x$ac_java_dir" = "xno"; then
-   kde_java_bindir=no
-   kde_java_includedir=no
-   kde_java_libjvmdir=no
-   kde_java_libhpidir=no
-else
-  if test "x$ac_java_dir" = "x"; then
-     
-     
-      dnl No option set -> look in $PATH
-      KDE_JAVA_PREFIX(/usr/j2se)
-      KDE_JAVA_PREFIX(/usr/j*dk*)
-      KDE_JAVA_PREFIX(/usr/lib/j*dk*)
-      KDE_JAVA_PREFIX(/opt/j*sdk*)
-      KDE_JAVA_PREFIX(/usr/lib/java*)
-      KDE_JAVA_PREFIX(/usr/java*)
-      KDE_JAVA_PREFIX(/usr/java/j*dk*)
-      KDE_JAVA_PREFIX(/usr/java/j*re*)
-      KDE_JAVA_PREFIX(/usr/lib/SunJava2*)
-      KDE_JAVA_PREFIX(/usr/lib/SunJava*)
-      KDE_JAVA_PREFIX(/usr/lib/IBMJava2*)
-      KDE_JAVA_PREFIX(/usr/lib/IBMJava*)
-      KDE_JAVA_PREFIX(/opt/java*)
-    
-      kde_cv_path="NONE"
-      kde_save_IFS=$IFS
-      IFS=':'
-      for dir in $PATH; do
-	  javadirs="$javadirs $dir"
-      done
-      IFS=$kde_save_IFS
-      jredirs=
-
-      for dir in $javadirs; do
-	  if test ! -d $dir; then break; fi
-          if test -x "$dir/java"; then
-                libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1`
-		if test ! -f $libjvmdir/libjvm.so; then continue; fi
-		jredirs="$jredirs $dir"
-	  fi
-      done
-
-      JAVAC=
-      JAVA=
-      kde_java_bindir=no
-      for dir in $jredirs; do
-	  JAVA="$dir/java"
-	  kde_java_bindir=$dir
-	  if test -x "$dir/javac"; then
-		JAVAC="$dir/javac"
-                break
-	  fi
-      done
-
-      if test -n "$JAVAC"; then
-          dnl this substitution might not work - well, we test for jni.h below
-          kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'`
-      else
-          kde_java_includedir=no
-      fi
-  else
-    dnl config option set
-    kde_java_bindir=$ac_java_dir/bin
-    if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then
-	kde_java_includedir=no
-    else
-        kde_java_includedir=$ac_java_dir/include
-    fi
-  fi
-fi
-
-dnl At this point kde_java_bindir and kde_java_includedir are either set or "no"
-if test "x$kde_java_bindir" != "xno"; then
-
-  dnl Look for libjvm.so
-  kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1`
-  dnl Look for libhpi.so and avoid green threads
-  kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1`
-
-  dnl Now check everything's fine under there
-  dnl the include dir is our flag for having the JDK
-  if test -d "$kde_java_includedir"; then
-    if test ! -x "$kde_java_bindir/javac"; then
-      AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.])
-    fi
-    if test ! -x "$kde_java_bindir/javah"; then
-      AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-    fi
-    if test ! -x "$kde_java_bindir/jar"; then
-      AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-    fi
-    if test ! -r "$kde_java_includedir/jni.h"; then
-      AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.])
-    fi
-
-    jni_includes="-I$kde_java_includedir"
-    dnl Strange thing, jni.h requires jni_md.h which is under genunix here..
-    dnl and under linux here..
-    test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux"
-    test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris"
-    test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix"
-
-  else
-    JAVAC=
-    jni_includes=
-  fi
-
-  if test ! -r "$kde_java_libjvmdir/libjvm.so"; then
-     AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.])
-  fi 
-
-  if test ! -x "$kde_java_bindir/java"; then
-      AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-  fi
-
-  if test ! -r "$kde_java_libhpidir/libhpi.so"; then
-    AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.])
-  fi
-
-  if test -n "$jni_includes"; then
-    dnl Check for JNI version
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_cxxflags_safe="$CXXFLAGS"
-    CXXFLAGS="$CXXFLAGS $all_includes $jni_includes"
-
-    AC_TRY_COMPILE([
-  #include <jni.h>
-	      ],
-	      [
-  #ifndef JNI_VERSION_1_2
-  Syntax Error
-  #endif
-	      ],[ kde_jni_works=yes ],
-	      [ kde_jni_works=no ])
-
-    if test $kde_jni_works = no; then
-      AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h.
-		    You need to have Java Development Kit (JDK) version 1.2. 
-
-		    Use --with-java to specify another location.
-		    Use --without-java to configure without java support.
-		    Or download a newer JDK and try again. 
-		    See e.g. http://java.sun.com/products/jdk/1.2 ])
-    fi
-
-    CXXFLAGS="$ac_cxxflags_safe"    
-    AC_LANG_RESTORE
-
-    dnl All tests ok, inform and subst the variables
-
-    JAVAC=$kde_java_bindir/javac
-    JAVAH=$kde_java_bindir/javah
-    JAR=$kde_java_bindir/jar
-    AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is])
-    JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi"
-    AC_MSG_RESULT([java JDK in $kde_java_bindir])
-
-  else
-      AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is])
-      AC_MSG_RESULT([java JRE in $kde_java_bindir])
-  fi
-else # no
-  AC_MSG_RESULT([none found])
-fi
-
-AC_SUBST(JAVAC)
-AC_SUBST(JAVAH)
-AC_SUBST(JAR)
-AC_SUBST(JVMLIBS)
-AC_SUBST(jni_includes)
-
-# for backward compat
-kde_cv_java_includedir=$kde_java_includedir
-kde_cv_java_bindir=$kde_java_bindir
-])
-
-dnl this is a redefinition of autoconf 2.5x's AC_FOREACH.
-dnl When the argument list becomes big, as in KDE for AC_OUTPUT in
-dnl big packages, m4_foreach is dog-slow.  So use our own version of
-dnl it.  (matz@kde.org)
-m4_define([mm_foreach],
-[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])])
-m4_define([mm_car], [[$1]])
-m4_define([mm_car2], [[$@]])
-m4_define([_mm_foreach],
-[m4_if(m4_quote($2), [], [],
-       [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1],
-                                                   mm_car2(m4_shift($2)),
-                                                   [$3])])])
-m4_define([AC_FOREACH],
-[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])])
-
-AC_DEFUN(KDE_NEED_FLEX,
-[
-kde_libs_safe=$LIBS
-LIBS="$LIBS $USER_LDFLAGS"
-AM_PROG_LEX
-LIBS=$kde_libs_safe
-if test -z "$LEXLIB"; then
-    AC_MSG_ERROR([You need to have flex installed.])
-fi
-AC_SUBST(LEXLIB)
-])
-
-AC_DEFUN(AC_PATH_QTOPIA,
-[
-  dnl TODO: use AC_CACHE_VAL
-
-  if test -z "$1"; then
-    qtopia_minver_maj=1
-    qtopia_minver_min=5
-    qtopia_minver_pat=0
-  else
-    qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"`
-    qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"`
-    qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"`
-  fi
-
-  qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat"
-  qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat"
-
-  AC_REQUIRE([AC_PATH_QT])
-
-  AC_MSG_CHECKING([for Qtopia])
-
-  LIB_QTOPIA="-lqpe"
-  AC_SUBST(LIB_QTOPIA)
-
-  kde_qtopia_dirs="$QPEDIR /opt/Qtopia"
-
-  ac_qtopia_incdir=NO
-
-  AC_ARG_WITH(qtopia-dir,
-              [  --with-qtopia-dir=DIR   where the root of Qtopia is installed ],
-              [  ac_qtopia_incdir="$withval"/include] ) 
-  
-  qtopia_incdirs=""
-  for dir in $kde_qtopia_dirs; do
-    qtopia_incdirs="$qtopia_incdirs $dir/include"
-  done
-
-  if test ! "$ac_qtopia_incdir" = "NO"; then
-    qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs"
-  fi
-
-  qtopia_incdir=""
-  AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir)
-  ac_qtopia_incdir="$qtopia_incdir"
-
-  if test -z "$qtopia_incdir"; then
-    AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.])
-  fi
-
-  qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`;
-  qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`;
-  qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`;
-
-  qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat"
-  qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat"
-  if test "$qtopia_ver" -lt "$qtopia_minver"; then
-    AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr
-is required.])
-  fi
-
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-
-  ac_cxxflags_safe="$CXXFLAGS"
-  ac_ldflags_safe="$LDFLAGS"
-  ac_libs_safe="$LIBS"
-
-  CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes"
-  LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
-  LIBS="$LIBS $LIB_QTOPIA $LIBQT"
-
-  cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <qpe/qpeapplication.h>
-#include <qpe/version.h>
-
-int main( int argc, char **argv )
-{
-    QPEApplication app( argc, argv );
-    return 0;
-}
-EOF
-
-  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-    rm -f conftest*
-  else
-    rm -f conftest*
-    AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at
-the end of config.log])
-  fi
-
-  CXXFLAGS="$ac_cxxflags_safe"
-  LDFLAGS="$ac_ldflags_safe"
-  LIBS="$ac_libs_safe"
-
-  AC_LANG_RESTORE
-
-  QTOPIA_INCLUDES="-I$qtopia_incdir"
-  AC_SUBST(QTOPIA_INCLUDES)
-
-  AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir])
-])
-
-
-AC_DEFUN(KDE_INIT_DOXYGEN,
-[
-AC_MSG_CHECKING([for Qt docs])
-kde_qtdir=
-if test "${with_qt_dir+set}" = set; then
-  kde_qtdir="$with_qt_dir"
-fi
-
-AC_FIND_FILE(ntqsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR)
-AC_MSG_RESULT($QTDOCDIR)
-
-AC_SUBST(QTDOCDIR)
-
-KDE_FIND_PATH(dot, DOT, [], [])
-if test -n "$DOT"; then
-  KDE_HAVE_DOT="YES"
-else
-  KDE_HAVE_DOT="NO"
-fi
-AC_SUBST(KDE_HAVE_DOT)
-KDE_FIND_PATH(doxygen, DOXYGEN, [], [])
-AC_SUBST(DOXYGEN)
-
-DOXYGEN_PROJECT_NAME="$1"
-DOXYGEN_PROJECT_NUMBER="$2"
-AC_SUBST(DOXYGEN_PROJECT_NAME)
-AC_SUBST(DOXYGEN_PROJECT_NUMBER)
-
-KDE_HAS_DOXYGEN=no
-if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/ntqsql.html; then
-  KDE_HAS_DOXYGEN=yes
-fi
-AC_SUBST(KDE_HAS_DOXYGEN)
-
-])
-
-
-AC_DEFUN(AC_FIND_BZIP2,
-[
-AC_MSG_CHECKING([for bzDecompress in libbz2])
-AC_CACHE_VAL(ac_cv_lib_bzip2,
-[
-AC_LANG_C
-kde_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(dnl
-[
-#define BZ_NO_STDIO
-#include<bzlib.h>
-],
-            [ bz_stream s; (void) bzDecompress(&s); ],
-            eval "ac_cv_lib_bzip2='-lbz2'",
-            eval "ac_cv_lib_bzip2=no")
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-AC_MSG_RESULT($ac_cv_lib_bzip2)
-
-if test ! "$ac_cv_lib_bzip2" = no; then
-  BZIP2DIR=bzip2
-
-  LIBBZ2="$ac_cv_lib_bzip2"
-  AC_SUBST(LIBBZ2)
-
-else
-
-   cxx_shared_flag=
-   ld_shared_flag=
-   KDE_CHECK_COMPILER_FLAG(shared, [
-	ld_shared_flag="-shared"
-   ])
-   KDE_CHECK_COMPILER_FLAG(fPIC, [
-        cxx_shared_flag="-fPIC"
-   ])
-
-   AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2])
-   AC_CACHE_VAL(ac_cv_lib_bzip2_prefix,
-   [
-   AC_LANG_CPLUSPLUS
-   kde_save_LIBS="$LIBS"
-   LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET"
-   kde_save_CXXFLAGS="$CXXFLAGS"
-   CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES"
-
-   AC_TRY_LINK(dnl
-   [
-   #define BZ_NO_STDIO
-   #include<bzlib.h>
-   ],
-               [ bz_stream s; (void) BZ2_bzDecompress(&s); ],
-               eval "ac_cv_lib_bzip2_prefix='-lbz2'",
-               eval "ac_cv_lib_bzip2_prefix=no")
-   LIBS="$kde_save_LIBS"
-   CXXFLAGS="$kde_save_CXXFLAGS"
-   ])dnl
-
-   AC_MSG_RESULT($ac_cv_lib_bzip2_prefix)
-   
-
-
-   if test ! "$ac_cv_lib_bzip2_prefix" = no; then
-     BZIP2DIR=bzip2
-    
-     LIBBZ2="$ac_cv_lib_bzip2_prefix"
-     AC_SUBST(LIBBZ2)
-
-     AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix])
-   dnl else, we just ignore this
-   fi
-
-fi
-AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR")
-])
-
-dnl ------------------------------------------------------------------------
-dnl Try to find the SSL headers and libraries.
-dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed)
-dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(KDE_CHECK_SSL,
-[
-LIBSSL="-lssl -lcrypto"
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-ac_ssl_includes=NO ac_ssl_libraries=NO
-ssl_libraries=""
-ssl_includes=""
-AC_ARG_WITH(ssl-dir,
-    [  --with-ssl-dir=DIR      where the root of OpenSSL is installed],
-    [  ac_ssl_includes="$withval"/include
-       ac_ssl_libraries="$withval"/lib$tdelibsuff
-    ])
-
-want_ssl=yes
-AC_ARG_WITH(ssl,
-    [  --without-ssl           disable SSL checks],
-    [want_ssl=$withval])
-
-if test $want_ssl = yes; then
-
-AC_MSG_CHECKING(for OpenSSL)
-
-AC_CACHE_VAL(ac_cv_have_ssl,
-[#try to guess OpenSSL locations
-  
-  ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes"
-  ssl_incdirs="$ac_ssl_includes $ssl_incdirs"
-  AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir)
-  ac_ssl_includes="$ssl_incdir"
-
-  ssl_libdirs="/usr/lib$tdelibsuff /usr/local/lib$tdelibsuff /usr/ssl/lib$tdelibsuff /usr/local/ssl/lib$tdelibsuff $libdir $prefix/lib$tdelibsuff $exec_prefix/lib$tdelibsuff $kde_extra_libs"
-  if test ! "$ac_ssl_libraries" = "NO"; then
-    ssl_libdirs="$ac_ssl_libraries $ssl_libdirs"
-  fi
-
-  test=NONE
-  ssl_libdir=NONE
-  for dir in $ssl_libdirs; do
-    try="ls -1 $dir/libssl*"
-    if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
-  done
-
-  ac_ssl_libraries="$ssl_libdir"
-
-  AC_LANG_SAVE
-  AC_LANG_C
-
-  ac_cflags_safe="$CFLAGS"
-  ac_ldflags_safe="$LDFLAGS"
-  ac_libs_safe="$LIBS"
-
-  CFLAGS="$CFLAGS -I$ssl_incdir $all_includes"
-  LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries"
-  LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref"
-
-  AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();,
-  ac_ssl_rsaref="yes"
-  ,
-  ac_ssl_rsaref="no"
-  )
-
-  CFLAGS="$ac_cflags_safe"
-  LDFLAGS="$ac_ldflags_safe"
-  LIBS="$ac_libs_safe"
-
-  AC_LANG_RESTORE
-
-  if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then
-    have_ssl=no
-  else
-    have_ssl=yes;
-  fi
-
-  ])
-
-  eval "$ac_cv_have_ssl"
-
-  AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes])
-
-  AC_MSG_CHECKING([whether OpenSSL uses rsaref])
-  AC_MSG_RESULT($ac_ssl_rsaref)
-
-  AC_MSG_CHECKING([for easter eggs])
-  AC_MSG_RESULT([none found])
-
-else
-  have_ssl=no
-fi
-
-if test "$have_ssl" = yes; then
-  AC_MSG_CHECKING(for OpenSSL version)
-  dnl Check for SSL version
-  AC_CACHE_VAL(ac_cv_ssl_version,
-  [
-    AC_LANG_SAVE
-    AC_LANG_C 
-
-    cat >conftest.$ac_ext <<EOF
-#include <openssl/opensslv.h>
-#include <stdio.h>
-    int main() {
- 
-#ifndef OPENSSL_VERSION_NUMBER
-      printf("ssl_version=\\"error\\"\n");
-#else
-      if (OPENSSL_VERSION_NUMBER < 0x00906000)
-        printf("ssl_version=\\"old\\"\n");
-      else
-        printf("ssl_version=\\"ok\\"\n");
-#endif
-     return (0);
-    }
-EOF
-
-    ac_compile='${CC-gcc} $CFLAGS -I$ac_ssl_includes conftest.$ac_ext -o conftest'
-    if AC_TRY_EVAL(ac_compile); then 
-
-      if eval `./conftest 2>&5`; then
-        if test $ssl_version = error; then
-          AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !])
-        else
-          if test $ssl_version = old; then
-            AC_MSG_WARN([OpenSSL version too old. Upgrade to 1.0.6 at least, see http://www.openssl.org. SSL support disabled.])
-            have_ssl=no
-          fi
-        fi
-        ac_cv_ssl_version="ssl_version=$ssl_version"
-      else
-        AC_MSG_ERROR([Your system couldn't run a small SSL test program.
-        Check config.log, and if you can't figure it out, send a mail to 
-        David Faure <faure@kde.org>, attaching your config.log])
-      fi
-
-    else
-      AC_MSG_ERROR([Your system couldn't link a small SSL test program.
-      Check config.log, and if you can't figure it out, send a mail to 
-      David Faure <faure@kde.org>, attaching your config.log])
-    fi 
-
-    AC_LANG_RESTORE
-
-  ])
-
-  eval "$ac_cv_ssl_version"
-  AC_MSG_RESULT($ssl_version)
-fi
-
-if test "$have_ssl" != yes; then
-  LIBSSL="";
-else
-  AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL])
-  ac_cv_have_ssl="have_ssl=yes \
-    ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref"
-  
-  
-  ssl_libraries="$ac_ssl_libraries"
-  ssl_includes="$ac_ssl_includes"
-
-  if test "$ac_ssl_rsaref" = yes; then
-    LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" 
-  fi
-
-  if test $ssl_version = "old"; then
-    AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 1.0.6])
-  fi
-fi
-
-if test "$ssl_includes" = "/usr/include" || test  "$ssl_includes" = "/usr/local/include" || test -z "$ssl_includes"; then
- SSL_INCLUDES="";
-else
- SSL_INCLUDES="-I$ssl_includes"
-fi
-
-if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries"; then
- SSL_LDFLAGS=""
-else
- SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries"
-fi
-
-AC_SUBST(SSL_INCLUDES)
-AC_SUBST(SSL_LDFLAGS)
-AC_SUBST(LIBSSL)
-])
-
-AC_DEFUN(KDE_CHECK_STRLCPY,
-[
-  AC_REQUIRE([AC_CHECK_STRLCAT])
-  AC_REQUIRE([AC_CHECK_STRLCPY])
-  AC_CHECK_SIZEOF(size_t)
-  AC_CHECK_SIZEOF(unsigned long)
-
-  AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long])
-  AC_TRY_COMPILE(,[
-    #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG
-       choke me
-    #endif
-    ],AC_MSG_RESULT([yes]),[
-      AC_MSG_RESULT(no)
-      AC_MSG_ERROR([
-       Apparently on your system our assumption sizeof size_t == sizeof unsigned long 
-       does not apply. Please mail kde-devel@kde.org with a description of your system!
-      ])
-  ])
-])
-
-AC_DEFUN(KDE_CHECK_BINUTILS,
-[
-  AC_MSG_CHECKING([if ld supports unversioned version maps])
-
-  kde_save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map"
-  echo "{ local: extern \"C++\" { foo }; };" > conftest.map
-  AC_TRY_LINK([int foo;],
-[
-#ifdef __INTEL_COMPILER
-icc apparently does not support libtools version-info and version-script
-at the same time. Dunno where the bug is, but until somebody figured out,
-better disable the optional version scripts.
-#endif
-
-  foo = 42;
-], kde_supports_versionmaps=yes, kde_supports_versionmaps=no)
-  LDFLAGS="$kde_save_LDFLAGS"
-  rm -f conftest.map
-  AM_CONDITIONAL(include_VERSION_SCRIPT, 
-    [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"])
-
-  AC_MSG_RESULT($kde_supports_versionmaps)
-])
-
-AC_DEFUN([AM_PROG_OBJC],[
-AC_CHECK_PROGS(OBJC, gcc, gcc)
-test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH])
-if test "x${OBJCFLAGS-unset}" = xunset; then
-   OBJCFLAGS="-g -O2"
-fi
-AC_SUBST(OBJCFLAGS)
-_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)])
-])
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
-# serial 47 AC_PROG_LIBTOOL
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="[$]2"
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[ifdef([AC_DIVERSION_NOTICE],
-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-[$]*
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-AC_DIVERT_POP
-])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-linux*)
-  # Test if the compiler is 64bit
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *"ELF 32"*)
-      LINUX_64_MODE="32"
-      ;;
-    *"ELF 64"*)
-      LINUX_64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-  
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   save_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS $3"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-   CFLAGS="$save_CFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
-else
-    ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
-else
-    ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  testring="ABCD"
-
-  case $host_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-	       = "XX$testring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$testring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      testring=$testring$testring
-    done
-    testring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}]
-EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_unknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# -------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   ifelse([$1],[],[save_CFLAGS="$CFLAGS"
-		   CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"],
-	  [$1],[CXX],[save_CXXFLAGS="$CXXFLAGS"
-		   CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"],
-	  [$1],[GCJ],[save_GCJFLAGS="$GCJFLAGS"
-		   GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
-
-   if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s out/conftest.err; then
-       # Append any errors to the config.log.
-       cat out/conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   ifelse([$1],[],[CFLAGS="$save_CFLAGS"],
-	  [$1],[CXX],[CXXFLAGS="$save_CXXFLAGS"],
-	  [$1],[GCJ],[GCJFLAGS="$save_GCJFLAGS"])
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var $1)"; then
-
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-  AC_MSG_RESULT([no])
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"`
-    if echo "$sys_lib_search_path_spec" | [egrep ';[C-Z]:/' >/dev/null]; then
-      # It is most probably a Windows format PATH printed by
-      # mingw gcc, but we are running on Cygwin. Gcc prints its search
-      # path with ; separators, and with drive letters. We can handle the
-      # drive letters (cygwin fileutils understands them), so leave them,
-      # especially as we might pass files found there to a mingw objdump,
-      # which wouldn't understand a cygwinified path. Ahh.
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'`
-    else
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed  -e "s/$PATH_SEPARATOR/ /g"`
-    fi
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  *) # from 3.2 on
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test "$host_cpu" = ia64; then
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    soname_spec='${libname}${release}.so$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-  else
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-    soname_spec='${libname}${release}.sl$major'
-  fi
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)          version_type=irix ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  libsuff=
-  if test "x$LINUX_64_MODE" = x64; then
-    # Some platforms are per default 64-bit, so there's no /lib64
-    if test -d /lib64; then
-      libsuff=64
-    fi
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags=TAGS],
-	[include additional configurations @<:@CXX,GCJ@:>@])],
-    [tagnames="$withval"],
-    [tagnames="CXX,GCJ"
-    case $host_os in
-      mingw*|cygwin*) tagnames="$tagnames,RC" ;;
-    esac])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	AC_LIBTOOL_LANG_CXX_CONFIG
-	;;
-
-      GCJ)
-	AC_LIBTOOL_LANG_GCJ_CONFIG
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      available_tags="$available_tags $tagname"
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-#- set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* | pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[[012]])
-    lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  if test "$host_cpu" = ia64; then
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-  else
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  fi
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-  irix5* | nonstopux*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh* | x86_64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  # the debian people say, arm and glibc 2.3.1 works for them with pass_all
-  arm* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-nto-qnx)
-  lt_cv_deplibs_check_method=unknown
-  ;;
-
-openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-  else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  esac
-  ;;
-
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ("$tmp_nm" -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ("$tmp_nm" -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided and an installed libltdl is not found, it is
-# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-# quotes!).  If your package is not flat and you're not using automake,
-# define top_builddir and top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-	      [ifdef([AC_PROVIDE_$1],
-		     [$2], [$3])])])
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-])# _LT_AC_LANG_CXX
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# --------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([AC_PROG_RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-#
-# Check for any special shared library compilation flags.
-#
-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-    ;;
-  esac
-fi
-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ 	]]" >/dev/null; then :
-  else
-    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-# Report which librarie types wil actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C test sources.
-ac_ext=cc
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int char *[]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${CXX-"c++"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if eval "`$CC -print-prog-name=ld` --version 2>&1" | \
-      egrep 'GNU ld' > /dev/null; then
-    with_gnu_ld=yes
-
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	egrep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      # KDE requires run time linking.  Make it the default.
-      aix_use_runtimelinking=yes
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-      esac
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='-qmkshrobj ${wl}-G'
-	else
-	  shared_flag='-qmkshrobj'
-	fi
-      fi
-    fi
-
-    # Let the compiler handle the export list.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	_LT_AC_TAGVAR(always_export_symbols, $1)=yes
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds it's shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  dgux*)
-    case $cc_basename in
-      ec++)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[12]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux*)
-    if test $with_gnu_ld = no; then
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      else
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      fi
-    fi
-    if test "$host_cpu" = ia64; then
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    else
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    fi
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					    # but as the default
-					    # location of the library.
-
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      aCC)
-	case $host_os in
-	hpux9*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	  ;;
-	*)
-	  if test "$host_cpu" = ia64; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  fi
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_os in
-	    hpux9*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	      ;;
-	    *)
-	      if test "$host_cpu" = ia64; then
-		_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	      else
-		_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      fi
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc)
-	# Intel C++
-	with_gnu_ld=yes
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      cxx)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    # NetBSD uses g++ - do we need to do anything?
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sco*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC)
-	# Sun C++ 4.2, 5.x and Centerline C++
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | egrep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-# Figure out "hidden" C++ library dependencies from verbose
-# compiler output whening linking a shared library.
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-
-
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext|*.$libext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out
-else
-  echo "libtool.m4: error: problem compiling C++ test program"
-fi
-
-$rm -f confest.$objext
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ;;
-esac
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for C test sources.
-ac_ext=java
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
-
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "$cfgfile"
-    # This is a source program that is used to create dlls on Windows
-    # Don't remove nor modify the starting and closing comments
-    _LT_AC_FILE_LTDLL_C
-    # This is a source program that is used to create import libraries
-    # on Windows for dlls which lack them. Don't remove nor modify the
-    # starting and closing comments
-    _LT_AC_FILE_IMPGEN_C
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-solaris* | sysv5*)
-  symcode='[[BDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[[ABCDGISTW]]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    cygwin* | mingw* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      fi
-      ;;
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix4* | aix5*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-      dgux*)
-	case $cc_basename in
-	  ec++)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux*)
-	case $cc_basename in
-	  KCC)
-	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  icpc)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  cxx)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC)
-	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx)
-	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      sco*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC)
-	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc)
-	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC)
-	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      unixware*)
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      fi
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-      fi
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    linux*)
-      if test "$CC" = "icc"; then
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-      fi
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      if test "x$host_vendor" = xsni; then
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      fi
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case "$host_os" in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC"
-    ;;
-esac
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix4* | aix5*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  cygwin* | mingw* | pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-],[
-  runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an egrep regular expression of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-
-      extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-	sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-	test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-	if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-	else $CC -o impgen impgen.c ; fi)~
-	$output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-      _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-      # cygwin and mingw dlls have different entry points and sets of symbols
-      # to exclude.
-      # FIXME: what about values for MSVC?
-      dll_entry=__cygwin_dll_entry@12
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-      case $host_os in
-      mingw*)
-	# mingw values
-	dll_entry=_DllMainCRTStartup@12
-	dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-	;;
-      esac
-
-      # mingw and cygwin differ, and it's simplest to just exclude the union
-      # of the two symbol sets.
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-      # recent cygwin and mingw systems supply a stub DllMain which the user
-      # can override, but on older systems we have to supply one (in ltdll.c)
-      if test "x$lt_cv_need_dllmain" = "xyes"; then
-	ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-	ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-  	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-      else
-	ltdll_obj=
-	ltdll_cmds=
-      fi
-
-      # Extract the symbol export list from an `--export-all' def file,
-      # then regenerate the def file from the symbol export list, so that
-      # the compiled dll only exports the symbol export list.
-      # Be careful not to strip the DATA tag left by newer dlltools.
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"'
-	$DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-	sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is.
-      # If DATA tags from a recent dlltool are present, honour them!
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname-def;
-	else
-	  echo EXPORTS > $output_objdir/$soname-def;
-	  _lt_hint=1;
-	  cat $export_symbols | while read symbol; do
-	   set dummy \$symbol;
-	   case \[$]# in
-	     2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	     *) echo "   \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-	   esac;
-	   _lt_hint=`expr 1 + \$_lt_hint`;
-	  done;
-	fi~
-	'"$ltdll_cmds"'
-	$CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-	$CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-	$CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris* | sysv5*)
-      if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-      runpath_var=LD_RUN_PATH
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-      case $host_os in
-      cygwin* | mingw* | pw32*)
-	# dlltool doesn't understand --whole-archive et. al.
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-	;;
-      *)
-	# ancient GNU ld didn't support --whole-archive et. al.
-	if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-	fi
-	;;
-      esac
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	fi
-
-	# KDE requires run time linking.  Make it the default.
-	aix_use_runtimelinking=yes
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	esac
-	shared_flag='-shared'
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-  	if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='-qmkshrobj ${wl}-G'
-	  else
-	    shared_flag='-qmkshrobj'
-  	fi
-	fi
-      fi
-
-      # Let the compiler handle the export list.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    bsdi4*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      ;;
-
-    darwin* | rhapsody*)
-      case "$host_os" in
-      rhapsody* | darwin1.[[012]])
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-	;;
-      esac
-
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-      # We need to add '_' to the symbols in $export_symbols first
-      #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-      ;;
-
-    dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      if test "$GCC" = yes; then
-	case $host_os in
-	  hpux9*)
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    else
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	    fi
-	    ;;
-	esac
-      else
-	case $host_os in
-	  hpux9*)
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-	    else
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-	    fi
-	    ;;
-	esac
-      fi
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=no
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      else
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      fi
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    openbsd*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	   ;;
-	 *)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    sco3.2v5*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-      esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      if test "x$host_vendor" = xsni; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-      fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4.2uw2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
-
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv5*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-#
-# Do we need to explicitly link libc?
-#
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $_LT_AC_TAGVAR(archive_cmds, $1) in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-    $rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-      if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-      then
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      else
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-      fi
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi
-    $rm conftest*
-    AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-    ;;
-  esac
-fi
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_FILE_IMPGEN_C
-# --------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_IMPGEN_C], [
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
-])# _LT_AC_FILE_IMPGEN_C
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-
-  # Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
-  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=$TMPDIR/sed$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-   { (exit 1); exit 1; }
-}
-  _max=0
-  _count=0
-  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
-  # along with /bin/sed that truncates output.
-  for _sed in $_sed_list /usr/xpg4/bin/sed; do
-    test ! -f ${_sed} && break
-    cat /dev/null > "$tmp/sed.in"
-    _count=0
-    echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in"
-    # Check for GNU sed and select it if it is found.
-    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
-      lt_cv_path_SED=${_sed}
-      break;
-    fi
-    while true; do
-      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
-      mv "$tmp/sed.tmp" "$tmp/sed.in"
-      cp "$tmp/sed.in" "$tmp/sed.nl"
-      echo >>"$tmp/sed.nl"
-      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
-      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
-      # 10000 chars as input seems more than enough
-      test $_count -gt 10 && break
-      _count=`expr $_count + 1`
-      if test $_count -gt $_max; then
-        _max=$_count
-        lt_cv_path_SED=$_sed
-      fi
-    done
-  done
-  rm -rf "$tmp"
-])
-AC_MSG_RESULT([$SED])
-])
-
-# AM_CONDITIONAL                                              -*- Autoconf -*-
-
-# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 5
-
-AC_PREREQ(2.52)
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-        [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([conditional \"$1\" was never defined.
-Usually this means the macro was only invoked conditionally.])
-fi])])
-
-# Do all the work for Automake.                            -*- Autoconf -*-
-
-# This macro actually does too much some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 8
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-AC_PREREQ([2.52])
-
-# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
-# the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl
- AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_][CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_][CC],
-                          defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_][CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_][CXX],
-                          defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-# Copyright 2002  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.6.3])])
-
-# Helper functions for option handling.                    -*- Autoconf -*-
-
-# Copyright 2001, 2002  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-#  -*- Autoconf -*-
-
-
-# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# AM_AUX_DIR_EXPAND
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-# Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_AUX_DIR_EXPAND], [
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# AM_PROG_INSTALL_STRIP
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# serial 4						-*- Autoconf -*-
-
-# Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    echo '#include "conftest.h"' > conftest.c
-    echo 'int i;' > conftest.h
-    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=conftest.c object=conftest.o \
-       depfile=conftest.Po tmpdepfile=conftest.TPo \
-       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      am_cv_$1_dependencies_compiler_type=$depmode
-      break
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[rm -f .deps 2>/dev/null
-mkdir .deps 2>/dev/null
-if test -d .deps; then
-  DEPDIR=.deps
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  DEPDIR=_deps
-fi
-rmdir .deps 2>/dev/null
-AC_SUBST([DEPDIR])
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking Speeds up one-time builds
-  --enable-dependency-tracking  Do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking.   -*- Autoconf -*-
-
-# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-#serial 2
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
-  # Extract the definition of DEP_FILES from the Makefile without
-  # running `make'.
-  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n -e '/^U = / s///p' < "$mf"`
-  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-  # We invoke sed twice because it is the simplest approach to
-  # changing $(DEPDIR) to its actual value in the expansion.
-  for file in `sed -n -e '
-    /^DEP_FILES = .*\\\\$/ {
-      s/^DEP_FILES = //
-      :loop
-	s/\\\\$//
-	p
-	n
-	/\\\\$/ b loop
-      p
-    }
-    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright 2001 Free Software Foundation, Inc.             -*- Autoconf -*-
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-doit:
-	@echo done
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-AC_SUBST(am__include)
-AC_SUBST(am__quote)
-AC_MSG_RESULT($_am_result)
-rm -f confinc confmf
-])
-
-
-# Copyright 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-AC_PREREQ(2.50)
-
-# AM_PROG_LEX
-# -----------
-# Autoconf leaves LEX=: if lex or flex can't be found.  Change that to a
-# "missing" invocation, for better error output.
-AC_DEFUN([AM_PROG_LEX],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])dnl
-AC_REQUIRE([AC_PROG_LEX])dnl
-if test "$LEX" = :; then
-  LEX=${am_missing_run}flex
-fi])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
-
-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_PREREQ([2.52])
-
-# serial 6
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  We must strip everything past the first ":",
-# and everything past the last "/".
-
-# _AM_DIRNAME(PATH)
-# -----------------
-# Like AS_DIRNAME, only do it during macro expansion
-AC_DEFUN([_AM_DIRNAME],
-       [m4_if(regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1,
-	      m4_if(regexp([$1], [^//\([^/]\|$\)]), -1,
-		    m4_if(regexp([$1], [^/.*]), -1,
-			  [.],
-			  patsubst([$1], [^\(/\).*], [\1])),
-		    patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])),
-	      patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl
-])# _AM_DIRNAME
-
-
-# The stamp files are numbered to have different names.
-# We could number them on a directory basis, but that's additional
-# complications, let's have a unique counter.
-m4_define([_AM_STAMP_Count], [0])
-
-
-# _AM_STAMP(HEADER)
-# -----------------
-# The name of the stamp file for HEADER.
-AC_DEFUN([_AM_STAMP],
-[m4_define([_AM_STAMP_Count], m4_incr(_AM_STAMP_Count))dnl
-AS_ESCAPE(_AM_DIRNAME(patsubst([$1],
-                               [:.*])))/stamp-h[]_AM_STAMP_Count])
-
-
-# _AM_CONFIG_HEADER(HEADER[:SOURCES], COMMANDS, INIT-COMMANDS)
-# ------------------------------------------------------------
-# We used to try to get a real timestamp in stamp-h.  But the fear is that
-# that will cause unnecessary cvs conflicts.
-AC_DEFUN([_AM_CONFIG_HEADER],
-[# Add the stamp file to the list of files AC keeps track of,
-# along with our hook.
-AC_CONFIG_HEADERS([$1],
-                  [# update the timestamp
-echo 'timestamp for $1' >"_AM_STAMP([$1])"
-$2],
-                  [$3])
-])# _AM_CONFIG_HEADER
-
-
-# AM_CONFIG_HEADER(HEADER[:SOURCES]..., COMMANDS, INIT-COMMANDS)
-# --------------------------------------------------------------
-AC_DEFUN([AM_CONFIG_HEADER],
-[AC_FOREACH([_AM_File], [$1], [_AM_CONFIG_HEADER(_AM_File, [$2], [$3])])
-])# AM_CONFIG_HEADER
-
diff --git a/admin/Doxyfile.am b/admin/Doxyfile.am
deleted file mode 100644
index 4697887..0000000
--- a/admin/Doxyfile.am
+++ /dev/null
@@ -1,163 +0,0 @@
-## generate API documentation with doxygen
-apidox-am-yes:
-	@if test "$(subdir)" != "."; then \
-		$(mkinstalldirs) $(top_builddir)/apidocs/$(subdir) ;\
-		if test ! -x $(top_builddir)/apidocs/common; then \
-			if test -d $(top_srcdir)/doc/common; then \
-			   common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\
-			else \
-	   		   common_dir=$(kde_libs_htmldir)/en/common ;\
-			fi ;\
-			$(LN_S) $$common_dir $(top_builddir)/apidocs/common; \
-		fi ;\
-		cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \
-		echo "PROJECT_NAME           = \"$(subdir) Library\"" >> Doxyfile; \
-		echo "PROJECT_NUMBER         = \"Version $(VERSION)\"" >> Doxyfile; \
-		echo "INPUT                  = $(srcdir)" >> Doxyfile; \
-		echo "IMAGE_PATH             = $(top_srcdir)/doc/api" >> Doxyfile ;\
-		echo "OUTPUT_DIRECTORY       = $(top_builddir)/apidocs" >> Doxyfile; \
-		echo "HTML_OUTPUT            = $(subdir)/html" >> Doxyfile; \
-		echo "LATEX_OUTPUT           = $(subdir)/latex" >> Doxyfile; \
-		echo "RTF_OUTPUT             = $(subdir)/rtf" >> Doxyfile; \
-		echo "MAN_OUTPUT             = $(subdir)/man" >> Doxyfile; \
-		echo "GENERATE_HTML          = $(GENERATE_FLAG)" >> Doxyfile ;\
-		echo "GENERATE_MAN          = $(GENERATE_FLAG)" >> Doxyfile ;\
-		echo "GENERATE_LATEX          = $(GENERATE_FLAG)" >> Doxyfile ;\
-		if test -n "$(DOXYGEN_EXCLUDE)"; then \
-			echo "EXCLUDE_PATTERNS      += $(DOXYGEN_EXCLUDE)" >> Doxyfile; \
-		fi ;\
-		echo "TAGFILES = \\" >> Doxyfile; \
-		tags='$(DOXYGEN_REFERENCES) qt'; for tag in $$tags; do \
-			tagpath= ;\
-			path="../../$$tag" ;\
-			if test -f $(top_builddir)/apidocs/$$tag/$$tag.tag; then \
-				tagpath="$(top_builddir)/apidocs/$$tag/$$tag.tag" ;\
-			else \
-				tagpath=`ls -1 $(kde_htmldir)/en/*-apidocs/$$tag/$$tag.tag 2> /dev/null` ;\
-				if test -n "$$tagpath"; then \
-					path=`echo $$tagpath | sed -e "s,.*/\([^/]*-apidocs\)/$$tag/$$tag.tag,../../../\1/$$tag,"` ;\
-				fi ;\
-			fi ;\
-			if test "$$tag" = qt; then \
-				echo $$tagpath=$(QTDOCDIR) >> Doxyfile ;\
-			else if test -n "$$tagpath"; then \
-				echo "$$tagpath=$$path/html \\" >> Doxyfile ;\
-			    fi ;\
-			fi ;\
-		done ;\
-		echo "GENERATE_TAGFILE       = $(top_builddir)/apidocs/$(subdir)/$(subdir).tag" >> Doxyfile ;\
-		echo "IGNORE_PREFIX          = K" >> Doxyfile ;\
-		echo "HAVE_DOT = $(KDE_HAVE_DOT)" >> Doxyfile ;\
-		$(DOXYGEN) Doxyfile ;\
-	fi
-
-apidox-am-no:
-
-install-data-local: install-apidox
-
-## install API documentation
-install-apidox:
-	@if test "$(subdir)" != "."; then \
-		$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \
-		if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \
-		echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
-		$(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
-		fi; \
-		if test -d $(top_builddir)/apidocs/$(subdir)/html; then \
-			list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \
-			for file in $$list; do \
-				echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \
-					$(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \
-		done; \
-		fi; \
-		rm -f $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \
-		$(LN_S) $(kde_libs_htmldir)/en/common $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \
-	else\
-		if test -d $(top_builddir)/apidocs; then \
-		$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\
-		list=`cd $(top_builddir)/apidocs && ls -1`; \
-		for file in $$list; do \
-			if test -f $(top_builddir)/apidocs/$$file; then \
-				echo $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
-				$(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
-			fi; \
-		done ; fi; \
-	fi
-
-uninstall-local: uninstall-apidox
-
-## uninstall API documentation
-uninstall-apidox:
-	@if test "$(subdir)" != "."; then \
-		if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \
-			rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
-		fi\
-	else\
-		if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \
-			rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
-		fi\
-	fi
-
-apidox:
-	@if test "$(subdir)" != "."; then \
-		$(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\
-	else \
-		$(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\
-	fi
-	@set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \
-	    list='$(SUBDIRS)'; \
-	    for subdir in $$list; do \
-		if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \
-		echo "Making apidox in $$subdir"; \
-		if test "$$subdir" != "."; then \
-			(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no apidox) || exit 1; \
-		fi ; fi ;\
-	    done; \
-	    for subdir in $$list; do \
-		if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \
-		echo "Making apidox in $$subdir"; \
-		if test "$$subdir" != "."; then \
-			(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=yes apidox) || exit 1; \
-		fi ; fi ;\
-	    done; \
-	fi
-
-apidox-am-toplevel-no:
-apidox-am-toplevel-yes:
-	@echo "*** Creating API documentation main page"; \
-	cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \
-	echo "PROJECT_NAME           = $(DOXYGEN_PROJECT_NAME)" >> Doxyfile ; \
-	echo "PROJECT_NUMBER         = $(DOXYGEN_PROJECT_NUMBER)" >> Doxyfile ; \
-	echo "INPUT                  = $(top_srcdir)" >> Doxyfile ; \
-	echo "OUTPUT_DIRECTORY       = $(top_builddir)/apidocs" >> Doxyfile ; \
-	echo "FILE_PATTERNS          = *.dox" >> Doxyfile ; \
-	echo "RECURSIVE              = NO" >> Doxyfile ; \
-	echo "SOURCE_BROWSER         = NO" >> Doxyfile ; \
-	echo "ALPHABETICAL_INDEX     = NO" >> Doxyfile ; \
-	echo "HTML_OUTPUT            = ." >> Doxyfile ; \
-	echo "HTML_HEADER            = apidocs/common/mainheader.html" >> Doxyfile ; \
-	echo "HTML_FOOTER            = apidocs/common/mainfooter.html" >> Doxyfile ; \
-	echo "HTML_STYLESHEET        = apidocs/common/doxygen.css" >> Doxyfile ; \
-	echo "GENERATE_LATEX         = NO" >> Doxyfile ; \
-	echo "GENERATE_RTF           = NO" >> Doxyfile ; \
-	echo "GENERATE_MAN           = NO" >> Doxyfile ; \
-	echo "GENERATE_XML           = NO" >> Doxyfile ; \
-	echo "GENERATE_AUTOGEN_DEF   = NO" >> Doxyfile ; \
-	echo "ENABLE_PREPROCESSING   = NO" >> Doxyfile ; \
-	echo "CLASS_DIAGRAMS         = NO" >> Doxyfile ; \
-	echo "HAVE_DOT               = NO" >> Doxyfile ; \
-	echo "GENERATE_HTML          = YES" >> Doxyfile ;\
-	$(mkinstalldirs) $(top_builddir)/apidocs ; \
-	rm -f $(top_builddir)/apidocs/common ; \
-	if test -d $(top_srcdir)/doc/common; then \
-	   common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\
-	else \
-	   common_dir=$(kde_libs_htmldir)/en/common ;\
-	fi ;\
-	$(LN_S) $$common_dir $(top_builddir)/apidocs/common ;\
-	doxygen Doxyfile; \
-	rm -f Doxyfile
-
-# Local Variables:
-# mode: makefile
-# End:
diff --git a/admin/Doxyfile.global b/admin/Doxyfile.global
deleted file mode 100644
index 50a237b..0000000
--- a/admin/Doxyfile.global
+++ /dev/null
@@ -1,954 +0,0 @@
-# Doxyfile 1.2.15
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
-#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-#       TAG = value [value, ...]
-# For lists items can also be appended using:
-#       TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
-#---------------------------------------------------------------------------
-# General configuration options
-#---------------------------------------------------------------------------
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
-# by quotes) that should identify the project.
-
-PROJECT_NAME           = 
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
-# This could be handy for archiving the generated documentation or 
-# if some version control system is used.
-
-PROJECT_NUMBER         = 
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
-# base path where the generated documentation will be put. 
-# If a relative path is entered, it will be relative to the location 
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ../apidocs/
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
-# documentation generated by doxygen is written. Doxygen will use this 
-# information to generate all constant output in the proper language. 
-# The default language is English, other supported languages are: 
-# Brazilian, Chinese, Croatian, Czech, Danish, Dutch, Finnish, French, 
-# German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, 
-# Portuguese, Romanian, Russian, Slovak, Slovene, Spanish and Swedish.
-
-OUTPUT_LANGUAGE        = English
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
-# documentation are documented, even if no documentation was available. 
-# Private class members and static file members will be hidden unless 
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL            = NO
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
-# will be included in the documentation.
-
-EXTRACT_PRIVATE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file 
-# will be included in the documentation.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
-# defined locally in source files will be included in the documentation. 
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES  = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
-# undocumented members of documented classes, files or namespaces. 
-# If set to NO (the default) these members will be included in the 
-# various overviews, but no documentation section is generated. 
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
-# undocumented classes that are normally visible in the class hierarchy. 
-# If set to NO (the default) these class will be included in the various 
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES     = YES
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
-# include brief member descriptions after the members that are listed in 
-# the file and class documentation (similar to JavaDoc). 
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
-# the brief description of a member or function before the detailed description. 
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF           = YES
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
-# Doxygen will generate a detailed section even if there is only a brief 
-# description.
-
-ALWAYS_DETAILED_SEC    = YES
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
-# members of a class in the documentation of that class as if those members were 
-# ordinary class members. Constructors, destructors and assignment operators of 
-# the base classes will not be shown.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
-# path before files name in the file list and in the header files. If set 
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES        = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
-# can be used to strip a user defined part of the path. Stripping is 
-# only done if one of the specified strings matches the left-hand part of 
-# the path. It is allowed to use relative paths in the argument list.
-
-STRIP_FROM_PATH        = 
-
-# The INTERNAL_DOCS tag determines if documentation 
-# that is typed after a \internal command is included. If the tag is set 
-# to NO (the default) then the documentation will be excluded. 
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS          = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
-# doxygen to hide any special comment blocks from generated source code 
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
-# file names in lower case letters. If set to YES upper case letters are also 
-# allowed. This is useful if you have classes or files whose names only differ 
-# in case and if your file system supports case sensitive file names. Windows 
-# users are adviced to set this option to NO.
-
-CASE_SENSE_NAMES       = YES
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
-# (but less readable) file names. This can be useful is your file systems 
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES            = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
-# will show members with their full class and namespace scopes in the 
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
-# will generate a verbatim copy of the header file for each class for 
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS       = YES
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
-# will put list of the files that are included by a file in the documentation 
-# of that file.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
-# will interpret the first line (until the first dot) of a JavaDoc-style 
-# comment as the brief description. If set to NO, the JavaDoc 
-# comments  will behave just like the Qt-style comments (thus requiring an 
-# explict @brief command for a brief description.
-
-JAVADOC_AUTOBRIEF      = YES
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
-# member inherits the documentation from any documented member that it 
-# reimplements.
-
-INHERIT_DOCS           = YES
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
-# is inserted in the documentation for inline members.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
-# will sort the (detailed) documentation of file and class members 
-# alphabetically by member name. If set to NO the members will appear in 
-# declaration order.
-
-SORT_MEMBER_DOCS       = NO
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
-# tag is set to YES, then doxygen will reuse the documentation of the first 
-# member in the group (if any) for the other members of the group. By default 
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE               = 4
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or 
-# disable (NO) the todo list. This list is created by putting \todo 
-# commands in the documentation.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or 
-# disable (NO) the test list. This list is created by putting \test 
-# commands in the documentation.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or 
-# disable (NO) the bug list. This list is created by putting \bug 
-# commands in the documentation.
-
-GENERATE_BUGLIST       = YES
-
-# This tag can be used to specify a number of aliases that acts 
-# as commands in the documentation. An alias has the form "name=value". 
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
-# put the command \sideeffect (or @sideeffect) in the documentation, which 
-# will result in a user defined paragraph with heading "Side Effects:". 
-# You can put \n's in the value part of an alias to insert newlines.
-
-# @ref in KDE docu are for kdoc, doxygen doesn't need them, so we alias them
-# to nothing here
-
-ALIASES                = libdoc=@mainpage \
-                         sect=<p><b> \
-                         reimplemented= \
-                         "deprecated=<b>This class or method is obsolete, it is provided for compatibility only.</b>" \
-                         obsolete=@deprecated \
-			 ref=
-
-# The ENABLED_SECTIONS tag can be used to enable conditional 
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS       = 
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
-# the initial value of a variable or define consist of for it to appear in 
-# the documentation. If the initializer consists of more lines than specified 
-# here it will be hidden. Use a value of 0 to hide initializers completely. 
-# The appearance of the initializer of individual variables and defines in the 
-# documentation can be controlled using \showinitializer or \hideinitializer 
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
-# only. Doxygen will then generate output that is more tailored for C. 
-# For instance some of the names that are used will be different. The list 
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C  = NO
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
-# only. Doxygen will then generate output that is more tailored for Java. 
-# For instance namespaces will be presented as packages, qualified scopes 
-# will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
-# at the bottom of the documentation of classes and structs. If set to YES the 
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES        = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated 
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are 
-# generated by doxygen. Possible values are YES and NO. If left blank 
-# NO is used.
-
-WARNINGS               = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED   = NO
-
-# The WARN_FORMAT tag determines the format of the warning messages that 
-# doxygen can produce. The string should contain the $file, $line, and $text 
-# tags, which will be replaced by the file and line number from which the 
-# warning originated and the warning text.
-
-WARN_FORMAT            = 
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning 
-# and error messages should be written. If left blank the output is written 
-# to stderr.
-
-WARN_LOGFILE           = 
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain 
-# documented source files. You may enter file names like "myfile.cpp" or 
-# directories like "/usr/src/myproject". Separate the files or directories 
-# with spaces.
-
-INPUT                  = 
-
-# If the value of the INPUT tag contains directories, you can use the 
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
-# and *.h) to filter out the source-files in the directories. If left 
-# blank the following patterns are tested: 
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp 
-# *.h++ *.idl *.odl
-
-FILE_PATTERNS          = *.h \
-                         *.cpp \
-                         *.cc \
-                         *.hpp
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
-# should be searched for input files as well. Possible values are YES and NO. 
-# If left blank NO is used.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should 
-# excluded from the INPUT source files. This way you can easily exclude a 
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE                = 
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories 
-# that are symbolic links (a Unix filesystem feature) are excluded from the input.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the 
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
-# certain files from those directories.
-
-EXCLUDE_PATTERNS       = *.moc.* \
-                         moc* \
-                         *.all_cpp.* \
-                         *unload.* \
-                         */test/* \
-                         */tests/*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or 
-# directories that contain example code fragments that are included (see 
-# the \include command).
-
-EXAMPLE_PATH           = 
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
-# and *.h) to filter out the source-files in the directories. If left 
-# blank all files are included.
-
-EXAMPLE_PATTERNS       = 
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
-# searched for input files to be used with the \include or \dontinclude 
-# commands irrespective of the value of the RECURSIVE tag. 
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or 
-# directories that contain image that are included in the documentation (see 
-# the \image command).
-
-IMAGE_PATH             = 
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should 
-# invoke to filter for each input file. Doxygen will invoke the filter program 
-# by executing (via popen()) the command <filter> <input-file>, where <filter> 
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
-# input file. Doxygen will then use the output that the filter program writes 
-# to standard output.
-
-INPUT_FILTER           = 
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
-# INPUT_FILTER) will be used to filter the input files when producing source 
-# files to browse.
-
-FILTER_SOURCE_FILES    = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
-# be generated. Documented entities will be cross-referenced with these sources.
-
-SOURCE_BROWSER         = YES
-
-# Setting the INLINE_SOURCES tag to YES will include the body 
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES         = NO
-
-# If the REFERENCED_BY_RELATION tag is set to YES (the default) 
-# then for each documented function all documented 
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES (the default) 
-# then for each documented function all documented entities 
-# called/used by that function will be listed.
-
-REFERENCES_RELATION    = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
-# of all compounds will be generated. Enable this if the project 
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX     = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX    = 3
-
-# In case all classes in a project start with a common prefix, all 
-# classes will be put under the same header in the alphabetical index. 
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX          = K
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
-# generate HTML output.
-
-GENERATE_HTML          = NO
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT            = 
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for 
-# each generated HTML page. If it is left blank doxygen will generate a 
-# standard header.
-
-HTML_HEADER            = ../apidocs/common/header.html
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
-# each generated HTML page. If it is left blank doxygen will generate a 
-# standard footer.
-
-HTML_FOOTER            = ../apidocs/common/footer.html
-
-# The HTML_STYLESHEET tag can be used to specify a user defined cascading 
-# style sheet that is used by each HTML page. It can be used to 
-# fine-tune the look of the HTML output. If the tag is left blank doxygen 
-# will generate a default style sheet
-
-HTML_STYLESHEET        = ../apidocs/common/doxygen.css
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
-# files or namespaces will be aligned in HTML using tables. If set to 
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
-# will be generated that can be used as input for tools like the 
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP      = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
-# controls if a separate .chi index file is generated (YES) or that 
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI           = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
-# controls whether a binary table of contents is generated (YES) or a 
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members 
-# to the contents of the Html help documentation and to the tree view.
-
-TOC_EXPAND             = NO
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
-# top of each HTML page. The value NO (the default) enables the index and 
-# the value YES disables it.
-
-DISABLE_INDEX          = YES
-
-# This tag can be used to set the number of enum values (range [1..20]) 
-# that doxygen will group on one line in the generated HTML documentation.
-
-ENUM_VALUES_PER_LINE   = 4
-
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that 
-# is generated for HTML Help). For this to work a browser that supports 
-# JavaScript and frames is required (for instance Mozilla, Netscape 4.0+, 
-# or Internet explorer 4.0+). Note that for large projects the tree generation 
-# can take a very long time. In such cases it is better to disable this feature. 
-# Windows users are probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW      = NO
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
-# used to set the initial width (in pixels) of the frame in which the tree 
-# is shown.
-
-TREEVIEW_WIDTH         = 250
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
-# generate Latex output.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT           = 
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be invoked. If left blank `latex' will be used as the default command name.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
-# generate index for LaTeX. If left blank `makeindex' will be used as the 
-# default command name.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
-# LaTeX documents. This may be useful for small projects and may help to 
-# save some trees in general.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used 
-# by the printer. Possible values are: a4, a4wide, letter, legal and 
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES         = 
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
-# the generated latex document. The header should contain everything until 
-# the first chapter. If it is left blank doxygen will generate a 
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER           = 
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
-# contain links (just like the HTML output) instead of page references 
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS         = NO
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
-# plain latex in the generated Makefile. Set this option to YES to get a 
-# higher quality PDF documentation.
-
-USE_PDFLATEX           = NO
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
-# command to the generated LaTeX files. This will instruct LaTeX to keep 
-# running if errors occur, instead of asking the user for help. 
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE        = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
-# The RTF output is optimised for Word 97 and may not look very pretty with 
-# other RTF readers or editors.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT             = 
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
-# RTF documents. This may be useful for small projects and may help to 
-# save some trees in general.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
-# will contain hyperlink fields. The RTF file will 
-# contain links (just like the HTML output) instead of page references. 
-# This makes the output suitable for online browsing using WORD or other 
-# programs which support those fields. 
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's 
-# config file, i.e. a series of assigments. You only have to provide 
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE    = 
-
-# Set optional variables used in the generation of an rtf document. 
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE    = 
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
-# generate man pages
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT             = 
-
-# The MAN_EXTENSION tag determines the extension that is added to 
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION          = .kde3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
-# then it will generate one additional man file for each entity 
-# documented in the real man page(s). These additional files 
-# only source the real man page, but without them the man command 
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS              = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will 
-# generate an XML file that captures the structure of 
-# the code including all documentation. Note that this 
-# feature is still experimental and incomplete at the 
-# moment.
-
-GENERATE_XML           = NO
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
-# generate an AutoGen Definitions (see autogen.sf.net) file 
-# that captures the structure of the code including all 
-# documentation. Note that this feature is still experimental 
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
-# evaluate all C-preprocessor directives found in the sources and include 
-# files.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
-# names in the source code. If set to NO (the default) only conditional 
-# compilation will be performed. Macro expansion can be done in a controlled 
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION        = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
-# then the macro expansion is limited to the macros specified with the 
-# PREDEFINED and EXPAND_AS_PREDEFINED tags.
-
-EXPAND_ONLY_PREDEF     = NO
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that 
-# contain include files that are not input files but should be processed by 
-# the preprocessor.
-
-INCLUDE_PATH           = 
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
-# patterns (like *.h and *.hpp) to filter out the header-files in the 
-# directories. If left blank, the patterns specified with FILE_PATTERNS will 
-# be used.
-
-INCLUDE_FILE_PATTERNS  = 
-
-# The PREDEFINED tag can be used to specify one or more macro names that 
-# are defined before the preprocessor is started (similar to the -D option of 
-# gcc). The argument of the tag is a list of macros of the form: name 
-# or name=definition (no spaces). If the definition and the = are 
-# omitted =1 is assumed.
-
-PREDEFINED             = TQT_VERSION=305
-
-# If the MACRO_EXPANSION and EXPAND_PREDEF_ONLY tags are set to YES then 
-# this tag can be used to specify a list of macro names that should be expanded. 
-# The macro definition that is found in the sources will be used. 
-# Use the PREDEFINED tag if you want to use a different macro definition.
-
-EXPAND_AS_DEFINED      = 
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
-# doxygen's preprocessor will remove all function-like macros that are alone 
-# on a line and do not end with a semicolon. Such function macros are typically 
-# used for boiler-plate code, and will confuse the parser if not removed.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration::addtions related to external references   
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tagfiles.
-
-TAGFILES               = 
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create 
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE       = 
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed 
-# in the class index. If set to NO only the inherited external classes 
-# will be listed.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
-# in the modules index. If set to NO, only the current project's groups will 
-# be listed.
-
-EXTERNAL_GROUPS        = NO
-
-# The PERL_PATH should be the absolute path and name of the perl script 
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH              = 
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
-# generate a inheritance diagram (in Html, RTF and LaTeX) for classes with base or 
-# super classes. Setting the tag to NO turns the diagrams off. Note that this 
-# option is superceded by the HAVE_DOT option below. This is only a fallback. It is 
-# recommended to install and use dot, since it yield more powerful graphs.
-
-CLASS_DIAGRAMS         = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
-# available from the path. This tool is part of Graphviz, a graph visualization 
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section 
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT               = NO
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for each documented class showing the direct and 
-# indirect inheritance relations. Setting this tag to YES will force the 
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH            = YES
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for each documented class showing the direct and 
-# indirect implementation dependencies (inheritance, containment, and 
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH    = YES
-
-# If set to YES, the inheritance and collaboration graphs will show the 
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS     = YES
-
-# If set to YES, the inheritance and collaboration graphs will hide 
-# inheritance and usage relations if the target is undocumented 
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS   = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
-# tags are set to YES then doxygen will generate a graph for each documented 
-# file showing the direct and indirect include dependencies of the file with 
-# other documented files.
-
-INCLUDE_GRAPH          = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
-# documented header file showing the documented files that directly or 
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH      = YES
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT       = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be 
-# found. If left blank, it is assumed the dot tool can be found on the path.
-
-DOT_PATH               = 
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that 
-# contain dot files that are included in the documentation (see the 
-# \dotfile command).
-
-DOTFILE_DIRS           = 
-
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
-# large images.
-
-MAX_DOT_GRAPH_WIDTH    = 800
-
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
-# large images.
-
-MAX_DOT_GRAPH_HEIGHT   = 1024
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
-# generate a legend page explaining the meaning of the various boxes and 
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
-# remove the intermedate dot files that are used to generate 
-# the various graphs.
-
-DOT_CLEANUP            = YES
-
-#---------------------------------------------------------------------------
-# Configuration::addtions related to the search engine   
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be 
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE           = NO
-
-# The CGI_NAME tag should be the name of the CGI script that 
-# starts the search engine (doxysearch) with the correct parameters. 
-# A script with this name will be generated by doxygen.
-
-CGI_NAME               = 
-
-# The CGI_URL tag should be the absolute URL to the directory where the 
-# cgi binaries are located. See the documentation of your http daemon for 
-# details.
-
-CGI_URL                = 
-
-# The DOC_URL tag should be the absolute URL to the directory where the 
-# documentation is located. If left blank the absolute path to the 
-# documentation, with file:// prepended to it, will be used.
-
-DOC_URL                = 
-
-# The DOC_ABSPATH tag should be the absolute path to the directory where the 
-# documentation is located. If left blank the directory on the local machine 
-# will be used.
-
-DOC_ABSPATH            = 
-
-# The BIN_ABSPATH tag must point to the directory where the doxysearch binary 
-# is installed.
-
-BIN_ABSPATH            = 
-
-# The EXT_DOC_PATHS tag can be used to specify one or more paths to 
-# documentation generated for other projects. This allows doxysearch to search 
-# the documentation for these projects as well.
-
-EXT_DOC_PATHS          = 
diff --git a/admin/Makefile.common b/admin/Makefile.common
deleted file mode 100644
index 875d95a..0000000
--- a/admin/Makefile.common
+++ /dev/null
@@ -1,34 +0,0 @@
-### Makefile.common
-###
-### Copyright (C) 2002 by the KDE developers
-
-### All the real work is done by the shellscript cvs.sh
-
-SHELL=/bin/sh
-
-cvs dist cvs-clean configure configure.in configure.files subdirs package-messages package-merge Makefile.am:
-	@admindir=$(admindir); \
-	if test "x$$admindir" = x; then \
-	  admindir=.; until test -f $$admindir/admin/cvs.sh; do \
-	    admindir=$$admindir/..; \
-	    if test `cd $$admindir && pwd` = / ; then break; fi; \
-	  done; \
-	  admindir=$$admindir/admin; \
-	  if test -f $$admindir/cvs.sh; then :; else \
-	    echo "Can't find the admin/ directory in any parent of the"; \
-	    echo "current directory.  Please set it with admindir=..."; \
-	    exit 1; \
-	  fi; \
-	fi; \
-	if test "$@" = "package-merge"; then \
-		MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \
-	  	$(SHELL) $$admindir/cvs.sh package-merge ;\
-	else MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\
-	fi
-
-configure.in: configure.files $(shell test -f configure.files && cat configure.files) subdirs
-configure.files: subdirs
-
-.SILENT:
-
-.PHONY: cvs dist cvs-clean package-merge package-messages
diff --git a/admin/acinclude.m4.in b/admin/acinclude.m4.in
deleted file mode 100644
index 200486d..0000000
--- a/admin/acinclude.m4.in
+++ /dev/null
@@ -1,5443 +0,0 @@
-##   -*- autoconf -*-
-
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu)
-dnl              (C) 1997,98,99 Stephan Kulow (coolo@kde.org)
-
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
-
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
-
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-dnl    Boston, MA 02111-1307, USA.
-
-dnl IMPORTANT NOTE:
-dnl Please do not modify this file unless you expect your modifications to be
-dnl carried into every other module in the repository. 
-dnl
-dnl Single-module modifications are best placed in configure.in for tdelibs
-dnl and tdebase or configure.in.in if present.
-
-# KDE_PATH_X_DIRECT
-dnl Internal subroutine of AC_PATH_X.
-dnl Set ac_x_includes and/or ac_x_libraries.
-AC_DEFUN(KDE_PATH_X_DIRECT,
-[
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-if test "$ac_x_includes" = NO; then
-  # Guess where to find include files, by looking for this one X11 .h file.
-  test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
-  # First, try using that file with no special directory specified.
-AC_TRY_CPP([#include <$x_direct_test_include>],
-[# We can compile using X headers with no special include directory.
-ac_x_includes=],
-[# Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-  for ac_dir in               \
-    /usr/X11/include          \
-    /usr/X11R6/include        \
-    /usr/X11R5/include        \
-    /usr/X11R4/include        \
-                              \
-    /usr/include/X11          \
-    /usr/include/X11R6        \
-    /usr/include/X11R5        \
-    /usr/include/X11R4        \
-                              \
-    /usr/local/X11/include    \
-    /usr/local/X11R6/include  \
-    /usr/local/X11R5/include  \
-    /usr/local/X11R4/include  \
-                              \
-    /usr/local/include/X11    \
-    /usr/local/include/X11R6  \
-    /usr/local/include/X11R5  \
-    /usr/local/include/X11R4  \
-                              \
-    /usr/X386/include         \
-    /usr/x386/include         \
-    /usr/XFree86/include/X11  \
-                              \
-    /usr/include              \
-    /usr/local/include        \
-    /usr/unsupported/include  \
-    /usr/athena/include       \
-    /usr/local/x11r5/include  \
-    /usr/lpp/Xamples/include  \
-                              \
-    /usr/openwin/include      \
-    /usr/openwin/share/include \
-    ; \
-  do
-    if test -r "$ac_dir/$x_direct_test_include"; then
-      ac_x_includes=$ac_dir
-      break
-    fi
-  done])
-fi # $ac_x_includes = NO
-
-if test "$ac_x_libraries" = NO; then
-  # Check for the libraries.
-
-  test -z "$x_direct_test_library" && x_direct_test_library=Xt
-  test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
-  # See if we find them without any special options.
-  # Don't add to $LIBS permanently.
-  ac_save_LIBS="$LIBS"
-  LIBS="-l$x_direct_test_library $LIBS"
-AC_TRY_LINK(, [${x_direct_test_function}()],
-[LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=],
-[LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \
-    /usr/X11/lib${tdelibsuff}           \
-    /usr/X11R6/lib${tdelibsuff}         \
-    /usr/X11R5/lib${tdelibsuff}         \
-    /usr/X11R4/lib${tdelibsuff}         \
-                                        \
-    /usr/lib${tdelibsuff}/X11           \
-    /usr/lib${tdelibsuff}/X11R6         \
-    /usr/lib${tdelibsuff}/X11R5         \
-    /usr/lib${tdelibsuff}/X11R4         \
-                                        \
-    /usr/local/X11/lib${tdelibsuff}     \
-    /usr/local/X11R6/lib${tdelibsuff}   \
-    /usr/local/X11R5/lib${tdelibsuff}   \
-    /usr/local/X11R4/lib${tdelibsuff}   \
-                                        \
-    /usr/local/lib${tdelibsuff}/X11     \
-    /usr/local/lib${tdelibsuff}/X11R6   \
-    /usr/local/lib${tdelibsuff}/X11R5   \
-    /usr/local/lib${tdelibsuff}/X11R4   \
-                                        \
-    /usr/X386/lib${tdelibsuff}          \
-    /usr/x386/lib${tdelibsuff}          \
-    /usr/XFree86/lib${tdelibsuff}/X11   \
-                                        \
-    /usr/lib${tdelibsuff}               \
-    /usr/local/lib${tdelibsuff}         \
-    /usr/unsupported/lib${tdelibsuff}   \
-    /usr/athena/lib${tdelibsuff}        \
-    /usr/local/x11r5/lib${tdelibsuff}   \
-    /usr/lpp/Xamples/lib${tdelibsuff}   \
-    /lib/usr/lib${tdelibsuff}/X11       \
-                                        \
-    /usr/openwin/lib${tdelibsuff}       \
-    /usr/openwin/share/lib${tdelibsuff} \
-    ; \
-do
-dnl Don't even attempt the hair of trying to link an X program!
-  for ac_extension in a so sl; do
-    if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
-      ac_x_libraries=$ac_dir
-      break 2
-    fi
-  done
-done])
-fi # $ac_x_libraries = NO
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Find a file (or one of more files in a list of dirs)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_FIND_FILE,
-[
-$3=NO
-for i in $2;
-do
-  for j in $1;
-  do
-    echo "configure: __oline__: $i/$j" >&AC_FD_CC
-    if test -r "$i/$j"; then
-      echo "taking that" >&AC_FD_CC
-      $3=$i
-      break 2
-    fi
-  done
-done
-])
-
-dnl KDE_FIND_PATH(programm-name, variable-name, list of directories,
-dnl	if-not-found, test-parameter)
-AC_DEFUN(KDE_FIND_PATH,
-[
-   AC_MSG_CHECKING([for $1])
-   if test -n "$$2"; then
-        kde_cv_path="$$2";
-   else
-        kde_cache=`echo $1 | sed 'y%./+-%__p_%'`
-
-        AC_CACHE_VAL(kde_cv_path_$kde_cache,
-        [
-        kde_cv_path="NONE"
-	dirs="$3"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/$1"; then
-	    if test -n "$5"
-	    then
-              evalstr="$dir/$1 $5 2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/$1"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/$1"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-        ])
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      AC_MSG_RESULT(not found)
-      $4
-   else
-      AC_MSG_RESULT($kde_cv_path)
-      $2=$kde_cv_path
-
-   fi
-])
-
-AC_DEFUN(KDE_MOC_ERROR_MESSAGE,
-[
-    AC_MSG_ERROR([No Qt meta object compiler (moc) found!
-Please check whether you installed Qt correctly.
-You need to have a running moc binary.
-configure tried to run $ac_cv_path_moc and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable MOC to the right one before running
-configure.
-])
-])
-
-AC_DEFUN(KDE_UIC_ERROR_MESSAGE,
-[
-    AC_MSG_WARN([No Qt ui compiler (uic) found!
-Please check whether you installed Qt correctly.
-You need to have a running uic binary.
-configure tried to run $ac_cv_path_uic and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable UIC to the right one before running
-configure.
-])
-])
-
-
-AC_DEFUN(KDE_CHECK_UIC_FLAG,
-[
-    AC_MSG_CHECKING([whether uic supports -$1 ])
-    kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'`
-    AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache,
-    [
-        cat >conftest.ui <<EOT
-        <!DOCTYPE UI><UI version="3" stdsetdef="1"></UI>
-EOT
-        ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null"
-        if AC_TRY_EVAL(ac_uic_testrun); then
-            eval "kde_cv_prog_uic_$kde_cache=yes"
-        else
-            eval "kde_cv_prog_uic_$kde_cache=no"
-        fi
-        rm -f conftest*
-    ])
-
-    if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then
-        AC_MSG_RESULT([yes])
-        :
-        $3
-    else
-        AC_MSG_RESULT([no])
-        :
-        $4
-    fi
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Find the meta object compiler and the ui compiler in the PATH,
-dnl in $QTDIR/bin, and some more usual places
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_PATH_QT_MOC_UIC,
-[
-   qt_bindirs=""
-   for dir in $kde_qt_dirs; do
-      qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
-   done
-   qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
-   if test ! "$ac_qt_bindir" = "NO"; then
-      qt_bindirs="$ac_qt_bindir $qt_bindirs"
-   fi
-
-   KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE])
-   if test -z "$UIC_NOT_NEEDED"; then
-     KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""])
-     if test -z "$UIC_PATH" ; then
-       KDE_UIC_ERROR_MESSAGE
-       exit 1
-     elif test $kde_qtver = 3; then
-       KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no)
-       KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no)
-
-       UIC=$UIC_PATH
-       if test x$ac_uic_supports_libpath = xyes; then
-           UIC="$UIC -L \$(kde_widgetdir)"
-       fi
-       if test x$ac_uic_supports_nounload = xyes; then
-           UIC="$UIC -nounload"
-       fi
-     fi
-   else
-     UIC="echo uic not available: "
-   fi
-
-   AC_SUBST(MOC)
-   AC_SUBST(UIC)
-
-   UIC_TR="i18n"
-   if test $kde_qtver = 3; then
-     UIC_TR="tr2i18n"
-   fi
-
-   AC_SUBST(UIC_TR)
-])
-
-AC_DEFUN(KDE_1_CHECK_PATHS,
-[
-  KDE_1_CHECK_PATH_HEADERS
-
-  KDE_TEST_RPATH=
-
-  if test -n "$USE_RPATH"; then
-
-     if test -n "$kde_libraries"; then
-       KDE_TEST_RPATH="-R $kde_libraries"
-     fi
-
-     if test -n "$qt_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
-     fi
-
-     if test -n "$x_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
-     fi
-
-     KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
-  fi
-
-AC_MSG_CHECKING([for KDE libraries installed])
-ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5'
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  AC_MSG_RESULT(yes)
-else
-  AC_MSG_ERROR([your system fails at linking a small KDE application!
-Check, if your compiler is installed correctly and if you have used the
-same compiler to compile Qt and tdelibs as you did use now.
-For more details about this problem, look at the end of config.log.])
-fi
-
-if eval `TDEDIR= ./conftest 2>&5`; then
-  kde_result=done
-else
-  kde_result=problems
-fi
-
-TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
-kde_have_all_paths=yes
-
-KDE_SET_PATHS($kde_result)
-
-])
-
-AC_DEFUN(KDE_SET_PATHS,
-[
-  kde_cv_all_paths="kde_have_all_paths=\"yes\" \
-	kde_htmldir=\"$kde_htmldir\" \
-	kde_appsdir=\"$kde_appsdir\" \
-	kde_icondir=\"$kde_icondir\" \
-	kde_sounddir=\"$kde_sounddir\" \
-	kde_datadir=\"$kde_datadir\" \
-	kde_locale=\"$kde_locale\" \
-	kde_cgidir=\"$kde_cgidir\" \
-	kde_confdir=\"$kde_confdir\" \
-	kde_mimedir=\"$kde_mimedir\" \
-	kde_toolbardir=\"$kde_toolbardir\" \
-	kde_wallpaperdir=\"$kde_wallpaperdir\" \
-	kde_templatesdir=\"$kde_templatesdir\" \
-	kde_bindir=\"$kde_bindir\" \
-	kde_servicesdir=\"$kde_servicesdir\" \
-	kde_servicetypesdir=\"$kde_servicetypesdir\" \
-	kde_moduledir=\"$kde_moduledir\" \
-	kde_styledir=\"$kde_styledir\" \
-	kde_widgetdir=\"$kde_widgetdir\" \
-	xdg_appsdir=\"$xdg_appsdir\" \
-	xdg_directorydir=\"$xdg_directorydir\" \
-	kde_result=$1"
-])
-
-AC_DEFUN(KDE_SET_DEFAULT_PATHS,
-[
-if test "$1" = "default"; then
-
-  if test -z "$kde_htmldir"; then
-    kde_htmldir='\${prefix}/share/doc/HTML'
-  fi
-  if test -z "$kde_appsdir"; then
-    kde_appsdir='\${prefix}/share/applnk'
-  fi
-  if test -z "$kde_icondir"; then
-    kde_icondir='\${prefix}/share/icons'
-  fi
-  if test -z "$kde_sounddir"; then
-    kde_sounddir='\${prefix}/share/sounds'
-  fi
-  if test -z "$kde_datadir"; then
-    kde_datadir='\${prefix}/share/apps'
-  fi
-  if test -z "$kde_locale"; then
-    kde_locale='\${prefix}/share/locale'
-  fi
-  if test -z "$kde_cgidir"; then
-    kde_cgidir='\${exec_prefix}/cgi-bin'
-  fi
-  if test -z "$kde_confdir"; then
-    kde_confdir='\${prefix}/share/config'
-  fi
-  if test -z "$kde_mimedir"; then
-    kde_mimedir='\${prefix}/share/mimelnk'
-  fi
-  if test -z "$kde_toolbardir"; then
-    kde_toolbardir='\${prefix}/share/toolbar'
-  fi
-  if test -z "$kde_wallpaperdir"; then
-    kde_wallpaperdir='\${prefix}/share/wallpapers'
-  fi
-  if test -z "$kde_templatesdir"; then
-    kde_templatesdir='\${prefix}/share/templates'
-  fi
-  if test -z "$kde_bindir"; then
-    kde_bindir='\${exec_prefix}/bin'
-  fi
-  if test -z "$kde_servicesdir"; then
-    kde_servicesdir='\${prefix}/share/services'
-  fi
-  if test -z "$kde_servicetypesdir"; then
-    kde_servicetypesdir='\${prefix}/share/servicetypes'
-  fi
-  if test -z "$kde_moduledir"; then
-    if test "$kde_qtver" = "2"; then
-      kde_moduledir='\${libdir}/kde2'
-    else
-      kde_moduledir='\${libdir}/kde3'
-    fi
-  fi
-  if test -z "$kde_styledir"; then
-    kde_styledir='\${libdir}/kde3/plugins/styles'
-  fi
-  if test -z "$kde_widgetdir"; then
-    kde_widgetdir='\${libdir}/kde3/plugins/designer'
-  fi
-  if test -z "$xdg_appsdir"; then
-    xdg_appsdir='\${datadir}/applications'
-  fi
-  if test -z "$xdg_directorydir"; then
-    xdg_directorydir='\${datadir}/desktop-directories'
-  fi
-
-  KDE_SET_PATHS(defaults)
-
-else
-
-  if test $kde_qtver = 1; then
-     AC_MSG_RESULT([compiling])
-     KDE_1_CHECK_PATHS
-  else
-     AC_MSG_ERROR([path checking not yet supported for KDE 2])
-  fi
-
-fi
-])
-
-AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS,
-[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
-   test -z "$kde_icondir" || test -z "$kde_sounddir" ||
-   test -z "$kde_datadir" || test -z "$kde_locale"  ||
-   test -z "$kde_cgidir"  || test -z "$kde_confdir" ||
-   test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
-   test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
-   test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
-   test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
-   test -z "$kde_styledir" || test -z "kde_widgetdir" ||
-   test -z "$xdg_appsdir" || test -z "xdg_directorydir" 
-   test "x$kde_have_all_paths" != "xyes"; then
-     kde_have_all_paths=no
-  fi
-])
-
-AC_DEFUN(KDE_MISSING_PROG_ERROR,
-[
-    AC_MSG_ERROR([The important program $1 was not found!
-Please check whether you installed KDE correctly.
-])
-])
-
-AC_DEFUN(KDE_MISSING_ARTS_ERROR,
-[
-    AC_MSG_ERROR([The important program $1 was not found!
-Please check whether you installed aRts correctly.
-])
-])
-
-AC_DEFUN(KDE_SUBST_PROGRAMS,
-[
-    AC_ARG_WITH(arts,
-        [  --without-arts        build without aRts [default=detect] ],
-        [build_arts=$withval],
-        [build_arts=yes]
-    )
-    AM_CONDITIONAL(include_ARTS, test "$build_arts" != "no")
-
-        kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin"
-        test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs"
-        if test -n "$TDEDIRS"; then
-           kde_save_IFS=$IFS
-           IFS=:
-           for dir in $TDEDIRS; do
-                kde_default_bindirs="$dir/bin $kde_default_bindirs "
-           done
-           IFS=$kde_save_IFS
-        fi
-        kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
-        KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)])
-        KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)])
-        if test "$build_arts" != "no"; then
-          KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)])
-          KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)])
-        fi
-        KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs])
-	KDE_FIND_PATH(brockenboring, BROCKENBORING, [$kde_default_bindirs])
-	if test -n "$BROCKENBORING"; then
-		KDE_FIND_PATH(tdeinit_wrapper, BROCKENBORING, [$kde_default_bindirs])
-	fi
-        KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs])
-
-        if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then  
- 	    kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share"
-            test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs"
-            AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET)
-	    if test "$KDE_XSL_STYLESHEET" = "NO"; then
-		KDE_XSL_STYLESHEET=""
-	    else
-                KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl"
-	    fi
-        fi
-
-        DCOP_DEPENDENCIES='$(DCOPIDL)'
-        AC_SUBST(DCOPIDL)
-        AC_SUBST(DCOPIDL2CPP)
-        AC_SUBST(DCOP_DEPENDENCIES)
-        AC_SUBST(MCOPIDL)
-        AC_SUBST(ARTSCCONFIG)
-        AC_SUBST(KDECONFIG)
-        AC_SUBST(BROCKENBORING)
-	AC_SUBST(MEINPROC)
- 	AC_SUBST(KDE_XSL_STYLESHEET)
-
-        if test -x "$KDECONFIG"; then # it can be "compiled"
-          kde_libs_prefix=`$KDECONFIG --prefix`
-          if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
-               AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs.
-                          This means it has been moved since you installed it.
-                          This won't work. Please recompile tdelibs for the new prefix.
-                          ])
-           fi
-           kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
-        else
-           kde_libs_prefix='$(prefix)'
-           kde_libs_htmldir='$(kde_htmldir)'
-        fi
-        AC_SUBST(kde_libs_prefix)
-        AC_SUBST(kde_libs_htmldir)
-])dnl
-
-AC_DEFUN(AC_CREATE_KFSSTND,
-[
-AC_REQUIRE([AC_CHECK_RPATH])
-
-AC_MSG_CHECKING([for KDE paths])
-kde_result=""
-kde_cached_paths=yes
-AC_CACHE_VAL(kde_cv_all_paths,
-[
-  KDE_SET_DEFAULT_PATHS($1)
-  kde_cached_paths=no
-])
-eval "$kde_cv_all_paths"
-KDE_CHECK_PATHS_FOR_COMPLETENESS
-if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
-  # wrong values were cached, may be, we can set better ones
-  kde_result=
-  kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
-  kde_datadir= kde_locale=  kde_cgidir=  kde_confdir=
-  kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
-  kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
-  kde_have_all_paths=
-  kde_styledir=
-  kde_widgetdir=
-  xdg_appsdir = xdg_directorydir=
-  KDE_SET_DEFAULT_PATHS($1)
-  eval "$kde_cv_all_paths"
-  KDE_CHECK_PATHS_FOR_COMPLETENESS
-  kde_result="$kde_result (cache overridden)"
-fi
-if test "$kde_have_all_paths" = "no"; then
-  AC_MSG_ERROR([configure could not run a little KDE program to test the environment.
-Since it had compiled and linked before, it must be a strange problem on your system.
-Look at config.log for details. If you are not able to fix this, look at
-http://www.kde.org/faq/installation.html or any www.kde.org mirror.
-(If you're using an egcs version on Linux, you may update binutils!)
-])
-else
-  rm -f conftest*
-  AC_MSG_RESULT($kde_result)
-fi
-
-bindir=$kde_bindir
-
-KDE_SUBST_PROGRAMS
-
-])
-
-AC_DEFUN(AC_SUBST_KFSSTND,
-[
-AC_SUBST(kde_htmldir)
-AC_SUBST(kde_appsdir)
-AC_SUBST(kde_icondir)
-AC_SUBST(kde_sounddir)
-AC_SUBST(kde_datadir)
-AC_SUBST(kde_locale)
-AC_SUBST(kde_confdir)
-AC_SUBST(kde_mimedir)
-AC_SUBST(kde_wallpaperdir)
-AC_SUBST(kde_bindir)
-dnl X Desktop Group standards
-AC_SUBST(xdg_appsdir)
-AC_SUBST(xdg_directorydir)
-dnl for KDE 2
-AC_SUBST(kde_templatesdir)
-AC_SUBST(kde_servicesdir)
-AC_SUBST(kde_servicetypesdir)
-AC_SUBST(kde_moduledir)
-AC_SUBST(tdeinitdir, '$(kde_moduledir)')
-AC_SUBST(kde_styledir)
-AC_SUBST(kde_widgetdir)
-if test "$kde_qtver" = 1; then
-  kde_minidir="$kde_icondir/mini"
-else
-# for KDE 1 - this breaks KDE2 apps using minidir, but
-# that's the plan ;-/
-  kde_minidir="/dev/null"
-fi
-dnl AC_SUBST(kde_minidir)
-dnl AC_SUBST(kde_cgidir)
-dnl AC_SUBST(kde_toolbardir)
-])
-
-AC_DEFUN(KDE_MISC_TESTS,
-[
-   AC_LANG_C
-   dnl Checks for libraries.
-   AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD 
-   AC_SUBST(LIBUTIL)
-   AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD
-   AC_SUBST(LIBCOMPAT)
-   kde_have_crypt=
-   AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes],
-      AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [
-        AC_MSG_WARN([you have no crypt in either libcrypt or libc.
-You should install libcrypt from another source or configure with PAM
-support])
-	kde_have_crypt=no
-      ]))
-   AC_SUBST(LIBCRYPT)
-   if test $kde_have_crypt = yes; then
-      AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function])
-   fi
-   AC_CHECK_SOCKLEN_T
-   AC_LANG_C
-   AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"])
-   if test $ac_cv_lib_dnet_dnet_ntoa = no; then
-      AC_CHECK_LIB(dnet_stub, dnet_ntoa,
-        [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"])
-   fi
-   AC_CHECK_FUNC(inet_ntoa)
-   if test $ac_cv_func_inet_ntoa = no; then
-     AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
-   fi
-   AC_CHECK_FUNC(connect)
-   if test $ac_cv_func_connect = no; then
-      AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
-        $X_EXTRA_LIBS)
-   fi
-
-   AC_CHECK_FUNC(remove)
-   if test $ac_cv_func_remove = no; then
-      AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix")
-   fi
-
-   # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
-   AC_CHECK_FUNC(shmat, ,
-     AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"))
-   
-   # darwin needs this to initialize the environment
-   AC_CHECK_HEADERS(crt_externs.h)
-   AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])])
- 
-   # more headers that need to be explicitly included on darwin
-   AC_CHECK_HEADERS(sys/types.h stdint.h)
-
-   # darwin requires a poll emulation library
-   AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll")
-
-   # CoreAudio framework
-   AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [
-     AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API])
-     FRAMEWORK_COREAUDIO="-framework CoreAudio"
-   ])
-
-   AC_CHECK_RES_INIT
-   AC_SUBST(LIB_POLL)
-   AC_SUBST(FRAMEWORK_COREAUDIO)
-   LIBSOCKET="$X_EXTRA_LIBS"
-   AC_SUBST(LIBSOCKET)
-   AC_SUBST(X_EXTRA_LIBS)
-   AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4
-   AC_SUBST(LIBUCB)
-
-   case $host in  dnl this *is* LynxOS specific
-   *-*-lynxos* )
-        AC_MSG_CHECKING([LynxOS header file wrappers])
-        [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"]
-        AC_MSG_RESULT(disabled)
-        AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS
-         ;;
-    esac
-
-   KDE_CHECK_TYPES
-   KDE_CHECK_LIBDL
-   KDE_CHECK_STRLCPY
-   
-AH_VERBATIM(_AIX_STRINGS_H_BZERO,
-[
-/*
- * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
- * that defines bzero.
- */
-
-#if defined(_AIX)
-#include <strings.h>
-#endif
-])
-
-AC_CHECK_FUNCS([vsnprintf snprintf])
-
-AH_VERBATIM(_TRU64,[
-/*
- * On HP-UX, the declaration of vsnprintf() is needed every time !
- */
-
-#if !defined(HAVE_VSNPRINTF) || defined(hpux)
-#if __STDC__
-#include <stdarg.h>
-#include <stdlib.h>
-#else
-#include <varargs.h>
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
-#ifdef __cplusplus
-extern "C"
-#endif
-int snprintf(char *str, size_t n, char const *fmt, ...);
-#endif
-])
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Find the header files and libraries for X-Windows. Extended the
-dnl macro AC_PATH_X
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(K_PATH_X,
-[
-AC_REQUIRE([KDE_MISC_TESTS])dnl
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_ARG_ENABLE(
-  embedded,
-  [  --enable-embedded       link to Qt-embedded, don't use X],
-  kde_use_qt_emb=$enableval,
-  kde_use_qt_emb=no
-)
-
-AC_ARG_ENABLE(
-  qtopia,
-  [  --enable-qtopia         link to Qt-embedded, link to the Qtopia Environment],
-  kde_use_qt_emb_palm=$enableval,
-  kde_use_qt_emb_palm=no
-)
-
-if test "$kde_use_qt_emb" = "no"; then
-
-AC_MSG_CHECKING(for X)
-AC_LANG_SAVE
-AC_LANG_C
-AC_CACHE_VAL(kde_cv_have_x,
-[# One or both of the vars are not set, and there is no cached value.
-if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
-   kde_x_includes=NO
-else
-   kde_x_includes=$x_includes
-fi
-if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
-   kde_x_libraries=NO
-else
-   kde_x_libraries=$x_libraries
-fi
-
-# below we use the standard autoconf calls
-ac_x_libraries=$kde_x_libraries
-ac_x_includes=$kde_x_includes
-
-KDE_PATH_X_DIRECT
-dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries.
-dnl Unfortunately, if compiling with the N32 ABI, this is not the correct
-dnl location. The correct location is /usr/lib32 or an undefined value
-dnl (the linker is smart enough to pick the correct default library).
-dnl Things work just fine if you use just AC_PATH_X_DIRECT.
-dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to
-dnl /usr/openwin/include, which doesn't work. /usr/include does work, so
-dnl x_includes should be left alone.
-case "$host" in
-mips-sgi-irix6*)
-  ;;
-*-*-solaris*)
-  ;;
-*)
-  _AC_PATH_X_XMKMF
-  if test -z "$ac_x_includes"; then
-    ac_x_includes="."
-  fi
-  if test -z "$ac_x_libraries"; then
-    ac_x_libraries="/usr/lib${tdelibsuff}"
-  fi
-esac
-#from now on we use our own again
-
-# when the user already gave --x-includes, we ignore
-# what the standard autoconf macros told us.
-if test "$kde_x_includes" = NO; then
-  kde_x_includes=$ac_x_includes
-fi
-
-# for --x-libraries too
-if test "$kde_x_libraries" = NO; then
-  kde_x_libraries=$ac_x_libraries
-fi
-
-if test "$kde_x_includes" = NO; then
-  AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!])
-fi
-
-if test "$kde_x_libraries" = NO; then
-  AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!])
-fi
-
-# Record where we found X for the cache.
-kde_cv_have_x="have_x=yes \
-         kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
-])dnl
-
-eval "$kde_cv_have_x"
-
-if test "$have_x" != yes; then
-  AC_MSG_RESULT($have_x)
-  no_x=yes
-else
-  AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes])
-fi
-
-if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
-  X_INCLUDES=""
-  x_includes="."; dnl better than nothing :-
- else
-  x_includes=$kde_x_includes
-  X_INCLUDES="-I$x_includes"
-fi
-
-if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
-  X_LDFLAGS=""
-  x_libraries="/usr/lib"; dnl better than nothing :-
- else
-  x_libraries=$kde_x_libraries
-  X_LDFLAGS="-L$x_libraries"
-fi
-all_includes="$X_INCLUDES"
-all_libraries="$X_LDFLAGS"
-
-AC_SUBST(X_INCLUDES)
-AC_SUBST(X_LDFLAGS)
-AC_SUBST(x_libraries)
-AC_SUBST(x_includes)
-
-# Check for libraries that X11R6 Xt/Xaw programs need.
-ac_save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
-# check for ICE first), but we must link in the order -lSM -lICE or
-# we get undefined symbols.  So assume we have SM if we have ICE.
-# These have to be linked with before -lX11, unlike the other
-# libraries we check for below, so use a different variable.
-#  --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
-AC_CHECK_LIB(ICE, IceConnectionNumber,
-  [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS)
-AC_SUBST(LIBSM)
-LDFLAGS="$ac_save_LDFLAGS"
-
-AC_SUBST(X_PRE_LIBS)
-
-LIB_X11='-lX11 $(LIBSOCKET)'
-AC_SUBST(LIB_X11)
-
-AC_MSG_CHECKING(for libXext)
-AC_CACHE_VAL(kde_cv_have_libXext,
-[
-kde_ldflags_safe="$LDFLAGS"
-kde_libs_safe="$LIBS"
-
-LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
-LIBS="-lXext -lX11 $LIBSOCKET"
-
-AC_TRY_LINK([
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-],
-[
-printf("hello Xext\n");
-],
-kde_cv_have_libXext=yes,
-kde_cv_have_libXext=no
-   )
-
-LDFLAGS=$kde_ldflags_safe
-LIBS=$kde_libs_safe
- ])
-
-AC_MSG_RESULT($kde_cv_have_libXext)
-
-if test "$kde_cv_have_libXext" = "no"; then
-  AC_MSG_ERROR([We need a working libXext to proceed. Since configure
-can't find it itself, we stop here assuming that make wouldn't find
-them either.])
-fi
-
-LIB_XEXT="-lXext"
-QTE_NORTTI=""
-
-else
-  dnl We're using QT Embedded
-  CPPFLAGS=-DQWS
-  CXXFLAGS="$CXXFLAGS -fno-rtti"
-  QTE_NORTTI="-fno-rtti -DQWS"
-  X_PRE_LIBS=""
-  LIB_X11=""
-  LIB_XEXT=""
-  LIBSM=""
-  X_INCLUDES=""
-  X_LDFLAGS=""
-  x_includes=""
-  x_libraries=""
-  AC_SUBST(X_PRE_LIBS)
-  AC_SUBST(LIB_X11)
-  AC_SUBST(LIBSM)
-  AC_SUBST(X_INCLUDES)
-  AC_SUBST(X_LDFLAGS)
-  AC_SUBST(x_includes)
-  AC_SUBST(x_libraries)
-fi
-AC_SUBST(QTE_NORTTI)
-AC_SUBST(LIB_XEXT)
-
-
-AC_LANG_RESTORE
-
-])
-
-AC_DEFUN(KDE_PRINT_QT_PROGRAM,
-[
-AC_REQUIRE([KDE_USE_QT])
-cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <ntqglobal.h>
-#include <ntqapplication.h>
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqevent.h>
-#include <ntqstring.h>
-#include <ntqstyle.h>
-EOF
-
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-#if TQT_VERSION < 210
-#error 1
-#endif
-EOF
-fi
-fi
-
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqcursor.h>
-#include <ntqstylefactory.h>
-#include <private/qucomextra_p.h>
-EOF
-fi
-
-echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
-cat >> conftest.$ac_ext <<EOF
-#error 1
-#endif
-
-int main() {
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-    QStringList *t = new QStringList();
-    Q_UNUSED(t);
-EOF
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-    QString s;
-    s.setLatin1("Elvis is alive", 14);
-EOF
-fi
-fi
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-    (void)QStyleFactory::create(QString::null);
-    QCursor c(Qt::WhatsThisCursor);
-EOF
-fi
-cat >> conftest.$ac_ext <<EOF
-    return 0;
-}
-EOF
-])
-
-AC_DEFUN(KDE_USE_QT,
-[
-if test -z "$1"; then
-  # Current default Qt version: 3.1
-  kde_qtver=3
-  kde_qtsubver=1
-else
-  kde_qtsubver=`echo "$1" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'`
-  # following is the check if subversion isnt found in passed argument
-  if test "$kde_qtsubver" = "$1"; then
-    kde_qtsubver=1
-  fi
-  kde_qtver=`echo "$1" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'`
-  if test "$kde_qtver" = "1"; then
-    kde_qtsubver=42
-  fi
-fi
-
-if test -z "$2"; then
-  if test "$kde_qtver" = "2"; then
-    if test $kde_qtsubver -gt 0; then
-      kde_qt_minversion=">= Qt 2.2.2"
-    else
-      kde_qt_minversion=">= Qt 2.0.2"
-    fi
-  fi
-  if test "$kde_qtver" = "3"; then
-    if test $kde_qtsubver -gt 0; then
-      kde_qt_minversion=">= Qt 3.1 (20021021)"
-    else
-      kde_qt_minversion=">= Qt 3.0"
-    fi
-  fi
-  if test "$kde_qtver" = "1"; then
-    kde_qt_minversion=">= 1.42 and < 2.0"
-  fi
-else
-   kde_qt_minversion=$2
-fi
-
-if test -z "$3"; then
-   if test $kde_qtver = 3; then
-     if test $kde_qtsubver -gt 0; then
-       kde_qt_verstring="TQT_VERSION >= 0x030100"
-     else
-       kde_qt_verstring="TQT_VERSION >= 300"
-     fi
-   fi
-   if test $kde_qtver = 2; then
-     if test $kde_qtsubver -gt 0; then
-       kde_qt_verstring="TQT_VERSION >= 222"
-     else
-       kde_qt_verstring="TQT_VERSION >= 200"
-     fi
-   fi
-   if test $kde_qtver = 1; then
-    kde_qt_verstring="TQT_VERSION >= 142 && TQT_VERSION < 200"
-   fi
-else
-   kde_qt_verstring=$3
-fi
-
-if test $kde_qtver = 3; then
-  kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3"
-fi
-if test $kde_qtver = 2; then
-   kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
-fi
-if test $kde_qtver = 1; then
-   kde_qt_dirs="$QTDIR /usr/lib/qt"
-fi
-])
-
-AC_DEFUN(KDE_CHECK_QT_DIRECT,
-[
-AC_REQUIRE([KDE_USE_QT])
-AC_MSG_CHECKING([if Qt compiles without flags])
-AC_CACHE_VAL(kde_cv_qt_direct,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
-ac_LIBRARY_PATH="$LIBRARY_PATH"
-ac_cxxflags_safe="$CXXFLAGS"
-ac_ldflags_safe="$LDFLAGS"
-ac_libs_safe="$LIBS"
-
-CXXFLAGS="$CXXFLAGS -I$qt_includes"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
-else
-LIBS="$LIBQT $LIBSOCKET"
-fi
-LD_LIBRARY_PATH=
-export LD_LIBRARY_PATH
-LIBRARY_PATH=
-export LIBRARY_PATH
-
-KDE_PRINT_QT_PROGRAM
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  kde_cv_qt_direct="yes"
-else
-  kde_cv_qt_direct="no"
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.$ac_ext >&AC_FD_CC
-fi
-
-rm -f conftest*
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-
-LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
-export LD_LIBRARY_PATH
-LIBRARY_PATH="$ac_LIBRARY_PATH"
-export LIBRARY_PATH
-AC_LANG_RESTORE
-])
-
-if test "$kde_cv_qt_direct" = "yes"; then
-  AC_MSG_RESULT(yes)
-  $1
-else
-  AC_MSG_RESULT(no)
-  $2
-fi
-])
-
-dnl ------------------------------------------------------------------------
-dnl Try to find the Qt headers and libraries.
-dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed)
-dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_PATH_QT_1_3,
-[
-AC_REQUIRE([K_PATH_X])
-AC_REQUIRE([KDE_USE_QT])
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-dnl ------------------------------------------------------------------------
-dnl Add configure flag to enable linking to MT version of Qt library.
-dnl ------------------------------------------------------------------------
-
-AC_ARG_ENABLE(
-  mt,
-  [  --disable-mt            link to non-threaded Qt (deprecated)],
-  kde_use_qt_mt=$enableval,
-  [
-    if test $kde_qtver = 3; then
-      kde_use_qt_mt=yes
-    else
-      kde_use_qt_mt=no
-    fi
-  ]
-)
-
-USING_QT_MT=""
-
-dnl ------------------------------------------------------------------------
-dnl If we not get --disable-tqt-mt then adjust some vars for the host.
-dnl ------------------------------------------------------------------------
-
-KDE_MT_LDFLAGS=
-KDE_MT_LIBS=
-if test "x$kde_use_qt_mt" = "xyes"; then
-  KDE_CHECK_THREADING
-  if test "x$kde_use_threading" = "xyes"; then
-    CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS"
-    KDE_MT_LDFLAGS="$USE_THREADS"
-    KDE_MT_LIBS="$LIBPTHREAD"
-  else
-    kde_use_qt_mt=no
-  fi
-fi
-AC_SUBST(KDE_MT_LDFLAGS)
-AC_SUBST(KDE_MT_LIBS)
-
-kde_qt_was_given=yes
-
-dnl ------------------------------------------------------------------------
-dnl If we haven't been told how to link to Qt, we work it out for ourselves.
-dnl ------------------------------------------------------------------------
-if test -z "$LIBQT_GLOB"; then
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    LIBQT_GLOB="libqte.*"
-  else
-    LIBQT_GLOB="libqt.*"
-  fi
-fi
-
-if test -z "$LIBQT"; then
-dnl ------------------------------------------------------------
-dnl If we got --enable-embedded then adjust the Qt library name.
-dnl ------------------------------------------------------------
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    qtlib="qte"
-  else
-    qtlib="qt"
-  fi
-
-  kde_int_qt="-l$qtlib"
-else
-  kde_int_qt="$LIBQT"
-  kde_lib_qt_set=yes
-fi
-
-if test -z "$LIBQPE"; then
-dnl ------------------------------------------------------------
-dnl If we got --enable-palmtop then add -lqpe to the link line
-dnl ------------------------------------------------------------
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    if test "x$kde_use_qt_emb_palm" = "xyes"; then
-      LIB_QPE="-lqpe"
-    else
-      LIB_QPE=""
-    fi
-  else
-    LIB_QPE=""
-  fi
-fi
-
-dnl ------------------------------------------------------------------------
-dnl If we got --enable-tqt-mt then adjust the Qt library name for the host.
-dnl ------------------------------------------------------------------------
-
-if test "x$kde_use_qt_mt" = "xyes"; then
-  if test -z "$LIBQT"; then
-    LIBQT="-l$qtlib-mt"
-    kde_int_qt="-l$qtlib-mt"
-  else
-    LIBQT="$qtlib-mt"
-    kde_int_qt="$qtlib-mt"
-  fi
-  LIBQT_GLOB="lib$qtlib-mt.*"
-  USING_QT_MT="using -mt"
-else
-  LIBQT="-l$qtlib"
-fi
-
-if test $kde_qtver != 1; then
-
-  AC_REQUIRE([AC_FIND_PNG])
-  AC_REQUIRE([AC_FIND_JPEG])
-  LIBQT="$LIBQT $LIBPNG $LIBJPEG"
-fi
-
-if test $kde_qtver = 3; then
-  AC_REQUIRE([KDE_CHECK_LIBDL])
-  LIBQT="$LIBQT $LIBDL"
-fi
-
-AC_MSG_CHECKING([for Qt])
-
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
-fi
-ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
-qt_libraries=""
-qt_includes=""
-AC_ARG_WITH(qt-dir,
-    [  --with-qt-dir=DIR       where the root of Qt is installed ],
-    [  ac_qt_includes="$withval"/include
-       ac_qt_libraries="$withval"/lib${tdelibsuff}
-       ac_qt_bindir="$withval"/bin
-    ])
-
-AC_ARG_WITH(qt-includes,
-    [  --with-qt-includes=DIR  where the Qt includes are. ],
-    [
-       ac_qt_includes="$withval"
-    ])
-
-kde_qt_libs_given=no
-
-AC_ARG_WITH(qt-libraries,
-    [  --with-qt-libraries=DIR where the Qt library is installed.],
-    [  ac_qt_libraries="$withval"
-       kde_qt_libs_given=yes
-    ])
-
-AC_CACHE_VAL(ac_cv_have_qt,
-[#try to guess Qt locations
-
-qt_incdirs=""
-for dir in $kde_qt_dirs; do
-   qt_incdirs="$qt_incdirs $dir/include $dir"
-done
-qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes"
-if test ! "$ac_qt_includes" = "NO"; then
-   qt_incdirs="$ac_qt_includes $qt_incdirs"
-fi
-
-if test "$kde_qtver" != "1"; then
-  kde_qt_header=ntqstyle.h
-else
-  kde_qt_header=ntqglobal.h
-fi
-
-AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir)
-ac_qt_includes="$qt_incdir"
-
-qt_libdirs=""
-for dir in $kde_qt_dirs; do
-   qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir"
-done
-qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
-if test ! "$ac_qt_libraries" = "NO"; then
-  qt_libdir=$ac_qt_libraries
-else
-  qt_libdirs="$ac_qt_libraries $qt_libdirs"
-  # if the Qt was given, the chance is too big that libqt.* doesn't exist
-  qt_libdir=NONE
-  for dir in $qt_libdirs; do
-    try="ls -1 $dir/${LIBQT_GLOB}"
-    if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
-  done
-fi
-
-ac_qt_libraries="$qt_libdir"
-
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-
-ac_cxxflags_safe="$CXXFLAGS"
-ac_ldflags_safe="$LDFLAGS"
-ac_libs_safe="$LIBS"
-
-CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
-LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
-LIBS="$LIBS $LIBQT $KDE_MT_LIBS"
-
-KDE_PRINT_QT_PROGRAM
-
-if AC_TRY_EVAL(ac_link) && test -s conftest; then
-  rm -f conftest*
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.$ac_ext >&AC_FD_CC
-  ac_qt_libraries="NO"
-fi
-rm -f conftest*
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-
-AC_LANG_RESTORE
-if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
-  ac_cv_have_qt="have_qt=no"
-  ac_qt_notfound=""
-  missing_qt_mt=""
-  if test "$ac_qt_includes" = NO; then
-    if test "$ac_qt_libraries" = NO; then
-      ac_qt_notfound="(headers and libraries)";
-    else
-      ac_qt_notfound="(headers)";
-    fi
-  else
-    if test "x$kde_use_qt_mt" = "xyes"; then
-       missing_qt_mt="
-Make sure that you have compiled Qt with thread support!"
-       ac_qt_notfound="(library $qtlib-mt)";
-    else
-       ac_qt_notfound="(library $qtlib)";
-    fi
-  fi
-
-  AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
-For more details about this problem, look at the end of config.log.$missing_qt_mt])
-else
-  have_qt="yes"
-fi
-])
-
-eval "$ac_cv_have_qt"
-
-if test "$have_qt" != yes; then
-  AC_MSG_RESULT([$have_qt]);
-else
-  ac_cv_have_qt="have_qt=yes \
-    ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
-  AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT])
-
-  qt_libraries="$ac_qt_libraries"
-  qt_includes="$ac_qt_includes"
-fi
-
-if test ! "$kde_qt_libs_given" = "yes"; then
-KDE_CHECK_QT_DIRECT(qt_libraries= ,[])
-fi
-
-AC_SUBST(qt_libraries)
-AC_SUBST(qt_includes)
-
-if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
- QT_INCLUDES=""
-else
- QT_INCLUDES="-I$qt_includes"
- all_includes="$QT_INCLUDES $all_includes"
-fi
-
-if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
- QT_LDFLAGS=""
-else
- QT_LDFLAGS="-L$qt_libraries"
- all_libraries="$all_libraries $QT_LDFLAGS"
-fi
-test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS"
-
-AC_SUBST(QT_INCLUDES)
-AC_SUBST(QT_LDFLAGS)
-AC_PATH_QT_MOC_UIC
-
-KDE_CHECK_QT_JPEG
-
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)'
-else
-LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)'
-fi
-test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS"
-
-AC_SUBST(LIB_QT)
-AC_SUBST(LIB_QPE)
-
-AC_SUBST(kde_qtver)
-])
-
-AC_DEFUN(AC_PATH_QT,
-[
-AC_PATH_QT_1_3
-])
-
-AC_DEFUN(KDE_CHECK_UIC_PLUGINS,
-[
-AC_REQUIRE([AC_PATH_QT_MOC_UIC])
-
-if test x$ac_uic_supports_libpath = xyes; then
-
-AC_MSG_CHECKING([if UIC has KDE plugins available])
-AC_CACHE_VAL(kde_cv_uic_plugins,
-[
-cat > actest.ui << EOF
-<!DOCTYPE UI><UI version="3.0" stdsetdef="1">
-<class>NewConnectionDialog</class>
-<widget class="QDialog">
-   <widget class="KLineEdit">
-        <property name="name">
-           <cstring>testInput</cstring>
-        </property>
-   </widget>
-</widget>
-</UI>
-EOF
-       
-
-
-kde_cv_uic_plugins=no
-kde_line="$UIC_PATH -L $kde_widgetdir"
-if test x$ac_uic_supports_nounload = xyes; then
-   kde_line="$kde_line -nounload"
-fi
-kde_line="$kde_line -impl actest.h actest.ui > actest.cpp"
-if AC_TRY_EVAL(kde_line); then
-	if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then
-		kde_cv_uic_plugins=yes
-	fi
-fi
-rm -f actest.ui actest.cpp
-])
-
-AC_MSG_RESULT([$kde_cv_uic_plugins])
-if test "$kde_cv_uic_plugins" != yes; then
-	AC_MSG_ERROR([you need to install tdelibs first.])
-fi
-fi
-])
-
-AC_DEFUN(KDE_CHECK_FINAL,
-[
-  AC_ARG_ENABLE(final, [  --enable-final          build size optimized apps (experimental - needs lots of memory)],
-	kde_use_final=$enableval, kde_use_final=no)
-
-  if test "x$kde_use_final" = "xyes"; then
-      KDE_USE_FINAL_TRUE=""
-      KDE_USE_FINAL_FALSE="#"
-   else
-      KDE_USE_FINAL_TRUE="#"
-      KDE_USE_FINAL_FALSE=""
-  fi
-  AC_SUBST(KDE_USE_FINAL_TRUE)
-  AC_SUBST(KDE_USE_FINAL_FALSE)
-])
-
-AC_DEFUN(KDE_CHECK_CLOSURE,
-[
-  AC_ARG_ENABLE(closure, [  --disable-closure       don't delay template instantiation],
-  	kde_use_closure=$enableval, kde_use_closure=yes)
-
-  KDE_NO_UNDEFINED=""
-  if test "x$kde_use_closure" = "xyes"; then
-       KDE_USE_CLOSURE_TRUE=""
-       KDE_USE_CLOSURE_FALSE="#"
-#       CXXFLAGS="$CXXFLAGS $REPO"
-  else
-       KDE_USE_CLOSURE_TRUE="#"
-       KDE_USE_CLOSURE_FALSE=""
-       KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined],
-            [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined],
-		[KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"],
-		[KDE_NO_UNDEFINED=""])],
-	    [KDE_NO_UNDEFINED=""])
-  fi
-  AC_SUBST(KDE_USE_CLOSURE_TRUE)
-  AC_SUBST(KDE_USE_CLOSURE_FALSE)
-  AC_SUBST(KDE_NO_UNDEFINED)
-])
-
-AC_DEFUN(KDE_CHECK_NMCHECK,
-[
-  AC_ARG_ENABLE(nmcheck, [  --enable-nmcheck        enable automatic namespace cleanness check],
-	kde_use_nmcheck=$enableval, kde_use_nmcheck=no)
-
-  if test "$kde_use_nmcheck" = "yes"; then
-      KDE_USE_NMCHECK_TRUE=""
-      KDE_USE_NMCHECK_FALSE="#"
-   else
-      KDE_USE_NMCHECK_TRUE="#"
-      KDE_USE_NMCHECK_FALSE=""
-  fi
-  AC_SUBST(KDE_USE_NMCHECK_TRUE)
-  AC_SUBST(KDE_USE_NMCHECK_FALSE)
-])
-
-
-dnl ------------------------------------------------------------------------
-dnl Now, the same with KDE
-dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed)
-dnl and $(kde_includes) will be the kdehdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_BASE_PATH_KDE,
-[
-AC_PREREQ([2.13])
-AC_REQUIRE([AC_PATH_QT])dnl
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_CHECK_RPATH
-AC_MSG_CHECKING([for KDE])
-
-if test "${prefix}" != NONE; then
-  kde_includes=${prefix}/include
-  ac_kde_includes=$prefix/include
-
-  if test "${exec_prefix}" != NONE; then
-     kde_libraries=${libdir}
-     ac_kde_libraries=$libdir
-     if test "$ac_kde_libraries" = '${exec_prefix}/lib'${tdelibsuff}; then
-	ac_kde_libraries=$exec_prefix/lib${tdelibsuff}
-     fi
-  else
-     kde_libraries=${prefix}/lib${tdelibsuff}
-     ac_kde_libraries=$prefix/lib${tdelibsuff}
-  fi
-else
-  ac_kde_includes=
-  ac_kde_libraries=
-  kde_libraries=""
-  kde_includes=""
-fi
-
-AC_CACHE_VAL(ac_cv_have_kde,
-[#try to guess kde locations
-
-if test "$kde_qtver" = 1; then
-  kde_check_header="ksock.h"
-  kde_check_lib="libtdecore.la"
-else
-  kde_check_header="ksharedptr.h"
-  kde_check_lib="libtdeio.la"
-fi
-
-if test -z "$1"; then
-
-kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes"
-test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs"
-kde_incdirs="$ac_kde_includes $kde_incdirs"
-AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir)
-ac_kde_includes="$kde_incdir"
-
-if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
-  AC_MSG_ERROR([
-in the prefix, you've chosen, are no KDE headers installed. This will fail.
-So, check this please and use another prefix!])
-fi
-
-kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}"
-test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs"
-kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs"
-AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir)
-ac_kde_libraries="$kde_libdir"
-
-kde_widgetdir=NO
-dnl this might be somewhere else
-AC_FIND_FILE("kde3/plugins/designer/tdewidgets.la", $kde_libdirs, kde_widgetdir)
-
-if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
-AC_MSG_ERROR([
-in the prefix, you've chosen, are no KDE libraries installed. This will fail.
-So, check this please and use another prefix!])
-fi
-
-if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then
-AC_MSG_ERROR([
-I can't find the designer plugins. These are required and should have been installed
-by tdelibs])
-fi
-
-if test -n "$kde_widgetdir"; then
-    kde_widgetdir="$kde_widgetdir/kde3/plugins/designer"
-fi
-
-
-if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then
-  ac_cv_have_kde="have_kde=no"
-else
-  ac_cv_have_kde="have_kde=yes \
-    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
-fi
-
-else dnl test -z $1
-
-  ac_cv_have_kde="have_kde=no"
-
-fi
-])dnl
-
-eval "$ac_cv_have_kde"
-
-if test "$have_kde" != "yes"; then
- if test "${prefix}" = NONE; then
-  ac_kde_prefix="$ac_default_prefix"
- else
-  ac_kde_prefix="$prefix"
- fi
- if test "$exec_prefix" = NONE; then
-  ac_kde_exec_prefix="$ac_kde_prefix"
-  AC_MSG_RESULT([will be installed in $ac_kde_prefix])
- else
-  ac_kde_exec_prefix="$exec_prefix"
-  AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix])
- fi
-
- kde_libraries="${libdir}"
- kde_includes=${ac_kde_prefix}/include
-
-else
-  ac_cv_have_kde="have_kde=yes \
-    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
-  AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes])
-
-  kde_libraries="$ac_kde_libraries"
-  kde_includes="$ac_kde_includes"
-fi
-AC_SUBST(kde_libraries)
-AC_SUBST(kde_includes)
-
-if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes"  || test "$kde_includes" = "/usr/include"; then
- KDE_INCLUDES=""
-else
- KDE_INCLUDES="-I$kde_includes"
- all_includes="$KDE_INCLUDES $all_includes"
-fi
-
-KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION"
- 
-KDE_LDFLAGS="-L$kde_libraries"
-if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then 
- all_libraries="$all_libraries $KDE_LDFLAGS"
-fi
-
-AC_SUBST(KDE_LDFLAGS)
-AC_SUBST(KDE_INCLUDES)
-
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
-all_libraries="$all_libraries $USER_LDFLAGS"
-all_includes="$all_includes $USER_INCLUDES"
-AC_SUBST(all_includes)
-AC_SUBST(all_libraries)
-
-if test -z "$1"; then
-KDE_CHECK_UIC_PLUGINS
-fi
-
-ac_kde_libraries="$kde_libdir"
-
-AC_SUBST(AUTODIRS)
-
-
-])
-
-AC_DEFUN(KDE_CHECK_EXTRA_LIBS,
-[
-AC_MSG_CHECKING(for extra includes)
-AC_ARG_WITH(extra-includes, [  --with-extra-includes=DIR
-                          adds non standard include paths],
-  kde_use_extra_includes="$withval",
-  kde_use_extra_includes=NONE
-)
-kde_extra_includes=
-if test -n "$kde_use_extra_includes" && \
-   test "$kde_use_extra_includes" != "NONE"; then
-
-   ac_save_ifs=$IFS
-   IFS=':'
-   for dir in $kde_use_extra_includes; do
-     kde_extra_includes="$kde_extra_includes $dir"
-     USER_INCLUDES="$USER_INCLUDES -I$dir"
-   done
-   IFS=$ac_save_ifs
-   kde_use_extra_includes="added"
-else
-   kde_use_extra_includes="no"
-fi
-AC_SUBST(USER_INCLUDES)
-
-AC_MSG_RESULT($kde_use_extra_includes)
-
-kde_extra_libs=
-AC_MSG_CHECKING(for extra libs)
-AC_ARG_WITH(extra-libs, [  --with-extra-libs=DIR   adds non standard library paths],
-  kde_use_extra_libs=$withval,
-  kde_use_extra_libs=NONE
-)
-if test -n "$kde_use_extra_libs" && \
-   test "$kde_use_extra_libs" != "NONE"; then
-
-   ac_save_ifs=$IFS
-   IFS=':'
-   for dir in $kde_use_extra_libs; do
-     kde_extra_libs="$kde_extra_libs $dir"
-     KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
-     USER_LDFLAGS="$USER_LDFLAGS -L$dir"
-   done
-   IFS=$ac_save_ifs
-   kde_use_extra_libs="added"
-else
-   kde_use_extra_libs="no"
-fi
-
-AC_SUBST(USER_LDFLAGS)
-
-AC_MSG_RESULT($kde_use_extra_libs)
-
-])
-
-AC_DEFUN(KDE_1_CHECK_PATH_HEADERS,
-[
-    AC_MSG_CHECKING([for KDE headers installed])
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-cat > conftest.$ac_ext <<EOF
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-#include "confdefs.h"
-#include <kapp.h>
-
-int main() {
-    printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data());
-    printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data());
-    printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data());
-    printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data());
-    printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data());
-    printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data());
-    printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data());
-    printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data());
-    printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data());
-    printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data());
-    printf("kde_wallpaperdir=\\"%s\\"\n",
-	TDEApplication::kde_wallpaperdir().data());
-    printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data());
-    printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data());
-    printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_moduledir=\\"/tmp/dummy\\"\n");
-    printf("kde_styledir=\\"/tmp/dummy\\"\n");
-    printf("kde_widgetdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_appsdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_directorydir=\\"/tmp/dummy\\"\n");
-    return 0;
-    }
-EOF
-
- ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
- if AC_TRY_EVAL(ac_compile); then
-   AC_MSG_RESULT(yes)
- else
-   AC_MSG_ERROR([your system is not able to compile a small KDE application!
-Check, if you installed the KDE header files correctly.
-For more details about this problem, look at the end of config.log.])
-  fi
-
-  AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_KDEQTADDON,
-[
-AC_MSG_CHECKING(for kde-qt-addon)
-AC_CACHE_VAL(kde_cv_have_kdeqtaddon,
-[
- kde_ldflags_safe="$LDFLAGS"
- kde_libs_safe="$LIBS"
- kde_cxxflags_safe="$CXXFLAGS"
-
- LIBS="-lkde-qt-addon $LIBQT $LIBS"
- CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/tde $all_includes"
- LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS"
-
- AC_TRY_LINK([
-   #include <ntqdom.h>
- ],
- [
-   QDomDocument doc;
- ],
-  kde_cv_have_kdeqtaddon=yes,
-  kde_cv_have_kdeqtaddon=no
- )
-
- LDFLAGS=$kde_ldflags_safe
- LIBS=$kde_libs_safe
- CXXFLAGS=$kde_cxxflags_safe
-])
-
-AC_MSG_RESULT($kde_cv_have_kdeqtaddon)
-
-if test "$kde_cv_have_kdeqtaddon" = "no"; then
-  AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first.
-It is a separate package (and CVS module) named kde-qt-addon.])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_KIMGIO,
-[
-   AC_REQUIRE([AC_BASE_PATH_KDE])
-   AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-   AC_REQUIRE([AC_FIND_TIFF])
-   AC_REQUIRE([AC_FIND_JPEG])
-   AC_REQUIRE([AC_FIND_PNG])
-   AC_REQUIRE([AC_FIND_JASPER])
-   AC_REQUIRE([KDE_CREATE_LIBS_ALIASES])
-
-   if test "$1" = "existance"; then
-     AC_LANG_SAVE
-     AC_LANG_CPLUSPLUS
-     kde_save_LIBS="$LIBS"
-     LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm"
-     AC_CHECK_LIB(kimgio, kimgioRegister, [
-      LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no)
-     LIBS="$kde_save_LIBS"
-     AC_LANG_RESTORE
-   else
-     LIBKIMGIO_EXISTS=yes
-   fi
-
-   if test "$LIBKIMGIO_EXISTS" = "yes"; then
-     LIB_KIMGIO='-lkimgio'
-   else
-     LIB_KIMGIO=''
-   fi
-   AC_SUBST(LIB_KIMGIO)
-])
-
-AC_DEFUN(KDE_CREATE_LIBS_ALIASES,
-[
-   AC_REQUIRE([KDE_MISC_TESTS])
-   AC_REQUIRE([KDE_CHECK_LIBDL])
-   AC_REQUIRE([K_PATH_X])
-
-if test $kde_qtver = 3; then
-   AC_SUBST(LIB_TDECORE, "-ltdecore")
-   AC_SUBST(LIB_TDEUI, "-ltdeui")
-   AC_SUBST(LIB_TDEIO, "-ltdeio")
-   AC_SUBST(LIB_SMB, "-lsmb")
-   AC_SUBST(LIB_KAB, "-lkab")
-   AC_SUBST(LIB_KABC, "-ltdeabc")
-   AC_SUBST(LIB_TDEHTML, "-ltdehtml")
-   AC_SUBST(LIB_TDESPELL, "-ltdespell")
-   AC_SUBST(LIB_TDEPARTS, "-ltdeparts")
-   AC_SUBST(LIB_TDEPRINT, "-ltdeprint")
-# these are for backward compatibility
-   AC_SUBST(LIB_TDESYCOCA, "-ltdeio")
-   AC_SUBST(LIB_KFILE, "-ltdeio")
-elif test $kde_qtver = 2; then
-   AC_SUBST(LIB_TDECORE, "-ltdecore")
-   AC_SUBST(LIB_TDEUI, "-ltdeui")
-   AC_SUBST(LIB_TDEIO, "-ltdeio")
-   AC_SUBST(LIB_TDESYCOCA, "-ltdesycoca")
-   AC_SUBST(LIB_SMB, "-lsmb")
-   AC_SUBST(LIB_KFILE, "-ltdefile")
-   AC_SUBST(LIB_KAB, "-lkab")
-   AC_SUBST(LIB_TDEHTML, "-ltdehtml")
-   AC_SUBST(LIB_TDESPELL, "-ltdespell")
-   AC_SUBST(LIB_TDEPARTS, "-ltdeparts")
-   AC_SUBST(LIB_TDEPRINT, "-ltdeprint")
-else
-   AC_SUBST(LIB_TDECORE, "-ltdecore -lXext $(LIB_QT)")
-   AC_SUBST(LIB_TDEUI, "-ltdeui $(LIB_TDECORE)")
-   AC_SUBST(LIB_KFM, "-lkfm $(LIB_TDECORE)")
-   AC_SUBST(LIB_KFILE, "-ltdefile $(LIB_KFM) $(LIB_TDEUI)")
-   AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_TDECORE)")
-fi
-])
-
-AC_DEFUN(AC_PATH_KDE,
-[
-  AC_BASE_PATH_KDE
-  AC_ARG_ENABLE(path-check, [  --disable-path-check    don't try to find out, where to install],
-  [
-  if test "$enableval" = "no";
-    then ac_use_path_checking="default"
-    else ac_use_path_checking=""
-  fi
-  ],
-  [
-  if test "$kde_qtver" = 1;
-    then ac_use_path_checking=""
-    else ac_use_path_checking="default"
-  fi
-  ]
-  )
-
-  AC_CREATE_KFSSTND($ac_use_path_checking)
-
-  AC_SUBST_KFSSTND
-  KDE_CREATE_LIBS_ALIASES
-])
-
-dnl KDE_CHECK_FUNC_EXT(<func>, [headers], [sample-use], [C prototype], [autoheader define], [call if found])
-AC_DEFUN(KDE_CHECK_FUNC_EXT,
-[
-AC_MSG_CHECKING(for $1)
-AC_CACHE_VAL(kde_cv_func_$1,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-save_CXXFLAGS="$CXXFLAGS"
-kde_safe_LIBS="$LIBS"
-LIBS="$LIBS $X_EXTRA_LIBS"
-if test "$GXX" = "yes"; then
-CXXFLAGS="$CXXFLAGS -pedantic-errors"
-fi
-AC_TRY_COMPILE([
-$2
-],
-[
-$3
-],
-kde_cv_func_$1=yes,
-kde_cv_func_$1=no)
-CXXFLAGS="$save_CXXFLAGS"
-LIBS="$kde_safe_LIBS"
-AC_LANG_RESTORE
-])
-
-AC_MSG_RESULT($kde_cv_func_$1)
-
-AC_MSG_CHECKING([if $1 needs custom prototype])
-AC_CACHE_VAL(kde_cv_proto_$1,
-[
-if test "x$kde_cv_func_$1" = xyes; then
-  kde_cv_proto_$1=no
-else
-  case "$1" in
-	setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat)
-		kde_cv_proto_$1="yes - in libtdefakes"
-		;;
-	*)
-		kde_cv_proto_$1=unknown
-		;;
-  esac
-fi
-
-if test "x$kde_cv_proto_$1" = xunknown; then
-
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-  kde_safe_libs=$LIBS
-  LIBS="$LIBS $X_EXTRA_LIBS"
-  AC_TRY_LINK([
-$2
-
-extern "C" $4;
-],
-[
-$3
-],
-[ kde_cv_func_$1=yes
-  kde_cv_proto_$1=yes ],
-  [kde_cv_proto_$1="$1 unavailable"]
-)
-LIBS=$kde_safe_libs
-AC_LANG_RESTORE
-fi
-])
-AC_MSG_RESULT($kde_cv_proto_$1)
-
-if test "x$kde_cv_func_$1" = xyes; then
-  AC_DEFINE(HAVE_$5, 1, [Define if you have $1])
-  $6
-fi
-if test "x$kde_cv_proto_$1" = xno; then
-  AC_DEFINE(HAVE_$5_PROTO, 1,
-  [Define if you have the $1 prototype])
-fi
-
-AH_VERBATIM([_HAVE_$5_PROTO],
-[
-#if !defined(HAVE_$5_PROTO)
-#ifdef __cplusplus
-extern "C"
-#endif
-$4;
-#endif
-])
-])
-
-AC_DEFUN(AC_CHECK_SETENV,
-[
-	KDE_CHECK_FUNC_EXT(setenv, [
-#include <stdlib.h>
-], 
-		[setenv("VAR", "VALUE", 1);],
-	        [int setenv (const char *, const char *, int)],
-		[SETENV])
-])
-
-AC_DEFUN(AC_CHECK_UNSETENV,
-[
-	KDE_CHECK_FUNC_EXT(unsetenv, [
-#include <stdlib.h>
-], 
-		[unsetenv("VAR");],
-	        [void unsetenv (const char *)],
-		[UNSETENV])
-])
-
-AC_DEFUN(AC_CHECK_GETDOMAINNAME,
-[
-	KDE_CHECK_FUNC_EXT(getdomainname, [
-#include <stdlib.h>
-#include <unistd.h>
-], 
-		[
-char buffer[200];
-getdomainname(buffer, 200);
-], 	
-	        [int getdomainname (char *, size_t)],
-		[GETDOMAINNAME])
-])
-
-AC_DEFUN(AC_CHECK_GETHOSTNAME,
-[
-	KDE_CHECK_FUNC_EXT(gethostname, [
-#include <stdlib.h>
-#include <unistd.h>
-], 
-		[
-char buffer[200];
-gethostname(buffer, 200);
-], 	
-	        [int gethostname (char *, unsigned int)],
-		[GETHOSTNAME])
-])
-
-AC_DEFUN(AC_CHECK_USLEEP,
-[
-	KDE_CHECK_FUNC_EXT(usleep, [
-#include <unistd.h>
-], 
-		[
-usleep(200);
-], 	
-	        [int usleep (unsigned int)],
-		[USLEEP])
-])
-
-
-AC_DEFUN(AC_CHECK_RANDOM,
-[
-	KDE_CHECK_FUNC_EXT(random, [
-#include <stdlib.h>
-], 
-		[
-random();
-], 	
-	        [long int random(void)],
-		[RANDOM])
-
-	KDE_CHECK_FUNC_EXT(srandom, [
-#include <stdlib.h>
-], 
-		[
-srandom(27);
-], 	
-	        [void srandom(unsigned int)],
-		[SRANDOM])
-
-])
-
-AC_DEFUN(AC_CHECK_INITGROUPS,
-[
-	KDE_CHECK_FUNC_EXT(initgroups, [
-#include <sys/types.h>
-#include <unistd.h>
-#include <grp.h>
-],
-	[
-char buffer[200];
-initgroups(buffer, 27);
-],
-	[int initgroups(const char *, gid_t)],
-	[INITGROUPS])
-])
-
-AC_DEFUN(AC_CHECK_MKSTEMPS,
-[
-	KDE_CHECK_FUNC_EXT(mkstemps, [
-#include <stdlib.h>
-#include <unistd.h>
-],
-	[
-mkstemps("/tmp/aaaXXXXXX", 6);
-],
-	[int mkstemps(char *, int)],
-	[MKSTEMPS])
-])
-
-AC_DEFUN(AC_CHECK_MKDTEMP,
-[
-	KDE_CHECK_FUNC_EXT(mkdtemp, [
-#include <stdlib.h>
-#include <unistd.h>
-],
-	[
-mkdtemp("/tmp/aaaXXXXXX");
-],
-	[char *mkdtemp(char *)],
-	[MKDTEMP])
-])
-
-
-AC_DEFUN(AC_CHECK_RES_INIT,
-[
-  AC_MSG_CHECKING([if res_init needs -lresolv])
-  kde_libs_safe="$LIBS"
-  LIBS="$LIBS $X_EXTRA_LIBS -lresolv"
-  AC_TRY_LINK(
-    [
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-    ],
-    [
-      res_init(); 
-    ],
-    [
-      LIBRESOLV="-lresolv"
-      AC_MSG_RESULT(yes)
-      AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function])
-    ],
-    [ AC_MSG_RESULT(no) ]
-  )
-  LIBS=$kde_libs_safe
-  AC_SUBST(LIBRESOLV)
-
-  AC_MSG_CHECKING([if res_init is available])
-  AC_TRY_COMPILE(
-    [
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-    ],
-    [
-      res_init();
-    ],
-    [
-      AC_MSG_RESULT(yes)
-      AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function])
-    ],
-    [ AC_MSG_RESULT(no) ]
-  )
-])
-
-AC_DEFUN(AC_CHECK_STRLCPY,
-[
-	KDE_CHECK_FUNC_EXT(strlcpy, [
-#include <string.h>
-],
-[ char buf[20];
-  strlcpy(buf, "KDE function test", sizeof(buf));
-],
- 	[unsigned long strlcpy(char*, const char*, unsigned long)],
-	[STRLCPY])
-])
-
-AC_DEFUN(AC_CHECK_STRLCAT,
-[
-	KDE_CHECK_FUNC_EXT(strlcat, [
-#include <string.h>
-],
-[ char buf[20];
-  buf[0]='\0';
-  strlcat(buf, "KDE function test", sizeof(buf));
-],
- 	[unsigned long strlcat(char*, const char*, unsigned long)],
-	[STRLCAT])
-])
-
-AC_DEFUN(AC_FIND_GIF,
-   [AC_MSG_CHECKING([for giflib])
-AC_CACHE_VAL(ac_cv_lib_gif,
-[ac_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$all_libraries -lgif -lX11 $LIBSOCKET"
-else
-LIBS="$all_libraries -lgif"
-fi
-AC_TRY_LINK(dnl
-[
-#ifdef __cplusplus
-extern "C" {
-#endif
-int GifLastError(void);
-#ifdef __cplusplus
-}
-#endif
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-],
-            [return GifLastError();],
-            eval "ac_cv_lib_gif=yes",
-            eval "ac_cv_lib_gif=no")
-LIBS="$ac_save_LIBS"
-])dnl
-if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then
-  AC_MSG_RESULT(yes)
-  AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif])
-else
-  AC_MSG_ERROR(You need giflib30. Please install the tdesupport package)
-fi
-])
-
-AC_DEFUN(KDE_FIND_JPEG_HELPER,
-[
-AC_MSG_CHECKING([for libjpeg$2])
-AC_CACHE_VAL(ac_cv_lib_jpeg_$1,
-[
-AC_LANG_C
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(
-[/* Override any gcc2 internal prototype to avoid an error.  */
-struct jpeg_decompress_struct;
-typedef struct jpeg_decompress_struct * j_decompress_ptr;
-typedef int size_t;
-#ifdef __cplusplus
-extern "C" {
-#endif
-    void jpeg_CreateDecompress(j_decompress_ptr cinfo,
-                                    int version, size_t structsize);
-#ifdef __cplusplus
-}
-#endif
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-],
-            [jpeg_CreateDecompress(0L, 0, 0);],
-            eval "ac_cv_lib_jpeg_$1=-ljpeg$2",
-            eval "ac_cv_lib_jpeg_$1=no")
-LIBS="$ac_save_LIBS"
-CFLAGS="$ac_save_CFLAGS"
-])
-
-if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then
-  LIBJPEG="$ac_cv_lib_jpeg_$1"
-  AC_MSG_RESULT($ac_cv_lib_jpeg_$1)
-else
-  AC_MSG_RESULT(no)
-  $3
-fi
-
-])
-
-AC_DEFUN(AC_FIND_JPEG,
-[
-dnl first look for libraries
-KDE_FIND_JPEG_HELPER(6b, 6b,
-   KDE_FIND_JPEG_HELPER(normal, [],
-    [
-       LIBJPEG=
-    ]
-   )
-)
-
-dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h
-dnl requires system dependent includes loaded before it)
-jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes"
-AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir)
-test "x$jpeg_incdir" = xNO && jpeg_incdir=
-
-dnl if headers _and_ libraries are missing, this is no error, and we
-dnl continue with a warning (the user will get no jpeg support in tdehtml)
-dnl if only one is missing, it means a configuration error, but we still
-dnl only warn
-if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg])
-else
-  if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
-    AC_MSG_WARN([
-There is an installation error in jpeg support. You seem to have only one
-of either the headers _or_ the libraries installed. You may need to either
-provide correct --with-extra-... options, or the development package of
-libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
-Disabling JPEG support.
-])
-  else
-    AC_MSG_WARN([libjpeg not found. disable JPEG support.])
-  fi
-  jpeg_incdir=
-  LIBJPEG=
-fi
-
-AC_SUBST(LIBJPEG)
-AH_VERBATIM(_AC_CHECK_JPEG,
-[/*
- * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
- * headers and I'm too lazy to write a configure test as long as only
- * unixware is related
- */
-#ifdef _UNIXWARE
-#define HAVE_BOOLEAN
-#endif
-])
-])
-
-AC_DEFUN(KDE_CHECK_QT_JPEG,
-[
-if test -n "$LIBJPEG"; then
-AC_MSG_CHECKING([if Qt needs $LIBJPEG])
-AC_CACHE_VAL(kde_cv_qt_jpeg,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS $LIBQT"
-LIBS=`echo $LIBS | sed "s/$LIBJPEG//"`
-ac_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(
-[#include <ntqapplication.h>],
-            [
-            int argc;
-            char** argv;
-            QApplication app(argc, argv);],
-            eval "kde_cv_qt_jpeg=no",
-            eval "kde_cv_qt_jpeg=yes")
-LIBS="$ac_save_LIBS"
-CXXFLAGS="$ac_save_CXXFLAGS"
-AC_LANG_RESTORE
-fi
-])
-
-if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then
-  AC_MSG_RESULT(yes)
-  LIBJPEG_QT='$(LIBJPEG)'
-else
-  AC_MSG_RESULT(no)
-  LIBJPEG_QT=
-fi
-
-])
-
-AC_DEFUN(AC_FIND_ZLIB,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_MSG_CHECKING([for libz])
-AC_CACHE_VAL(ac_cv_lib_z,
-[
-AC_LANG_C
-kde_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(dnl
-[
-#include<zlib.h>
-],
-[
-  char buf[42];
-  gzFile f = (gzFile) 0;
-  /* this would segfault.. but we only link, don't run */
-  (void) gzgets(f, buf, sizeof(buf));
-
-  return (zlibVersion() == ZLIB_VERSION); 
-],
-            eval "ac_cv_lib_z='-lz'",
-            eval "ac_cv_lib_z=no")
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if test ! "$ac_cv_lib_z" = no; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz])
-  LIBZ="$ac_cv_lib_z"
-  AC_MSG_RESULT($ac_cv_lib_z)
-else
-  AC_MSG_ERROR(not found. 
-          Possibly configure picks up an outdated version
-          installed by XFree86. Remove it from your system.
-
-          Check your installation and look into config.log)
-  LIBZ=""
-fi
-AC_SUBST(LIBZ)
-])
-
-AC_DEFUN(KDE_TRY_TIFFLIB,
-[
-AC_MSG_CHECKING([for libtiff $1])
-
-AC_CACHE_VAL(kde_cv_libtiff_$1,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-kde_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm"
-else
-LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm"
-fi
-kde_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
-
-AC_TRY_LINK(dnl
-[
-#include<tiffio.h>
-],
-    [return (TIFFOpen( "", "r") == 0); ],
-[
-    kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ"
-], [
-    kde_cv_libtiff_$1=no
-])
-
-LIBS="$kde_save_LIBS"
-CXXFLAGS="$kde_save_CXXFLAGS"
-AC_LANG_RESTORE
-])
-
-if test "$kde_cv_libtiff_$1" = "no"; then
-    AC_MSG_RESULT(no)
-    LIBTIFF=""
-    $3
-else
-    LIBTIFF="$kde_cv_libtiff_$1"
-    AC_MSG_RESULT(yes)
-    AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff])
-    $2
-fi
-
-])
-
-AC_DEFUN(AC_FIND_TIFF,
-[
-AC_REQUIRE([K_PATH_X])
-AC_REQUIRE([AC_FIND_ZLIB])
-AC_REQUIRE([AC_FIND_JPEG])
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
-KDE_TRY_TIFFLIB(tiff, [],
-   KDE_TRY_TIFFLIB(tiff34))
-
-AC_SUBST(LIBTIFF)
-])
-
-
-AC_DEFUN(AC_FIND_PNG,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_REQUIRE([AC_FIND_ZLIB])
-AC_MSG_CHECKING([for libpng])
-AC_CACHE_VAL(ac_cv_lib_png,
-[
-kde_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
-else
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm"
-fi
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_LANG_C
-AC_TRY_LINK(dnl
-    [
-    #include<png.h>
-    ],
-    [
-    png_structp png_ptr = png_create_read_struct(  /* image ptr */
-		PNG_LIBPNG_VER_STRING, 0, 0, 0 );
-    return( png_ptr != 0 );
-    ],
-    eval "ac_cv_lib_png='-lpng $LIBZ -lm'",
-    eval "ac_cv_lib_png=no"
-)
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
-  AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng])
-  LIBPNG="$ac_cv_lib_png"
-  AC_SUBST(LIBPNG)
-  AC_MSG_RESULT($ac_cv_lib_png)
-else
-  AC_MSG_RESULT(no)
-  LIBPNG=""
-  AC_SUBST(LIBPNG)
-fi
-])
-
-
-AC_DEFUN(AC_FIND_JASPER,
-[
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_REQUIRE([AC_FIND_JPEG])
-AC_MSG_CHECKING([for jasper])
-AC_CACHE_VAL(ac_cv_jasper,
-[
-kde_save_LIBS="$LIBS"
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_LANG_C
-AC_TRY_LINK(dnl
-    [
-    #include<jasper/jasper.h>
-    ],
-    [
-    return( jas_init() );
-    ],
-    eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'",
-    eval "ac_cv_jasper=no"
-)
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then
-  AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper])
-  LIB_JASPER="$ac_cv_jasper"
-  AC_MSG_RESULT($ac_cv_jasper)
-else
-  AC_MSG_RESULT(no)
-  LIB_JASPER=""
-fi
-AC_SUBST(LIB_JASPER)
-])
-
-AC_DEFUN(AC_CHECK_BOOL,
-[
-  AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool])
-])
-
-AC_DEFUN(AC_CHECK_GNU_EXTENSIONS,
-[
-AC_MSG_CHECKING(if you need GNU extensions)
-AC_CACHE_VAL(ac_cv_gnu_extensions,
-[
-cat > conftest.c << EOF
-#include <features.h>
-
-#ifdef __GNU_LIBRARY__
-yes
-#endif
-EOF
-
-if (eval "$ac_cpp conftest.c") 2>&5 |
-  egrep "yes" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_gnu_extensions=yes
-else
-  ac_cv_gnu_extensions=no
-fi
-])
-
-AC_MSG_RESULT($ac_cv_gnu_extensions)
-if test "$ac_cv_gnu_extensions" = "yes"; then
-  AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_COMPILER_FLAG,
-[
-AC_MSG_CHECKING([whether $CXX supports -$1])
-kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'`
-AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache,
-[
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -$1"
-  AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], [])
-  CXXFLAGS="$save_CXXFLAGS"
-  AC_LANG_RESTORE
-])
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- AC_MSG_RESULT(yes)
- :
- $2
-else
- AC_MSG_RESULT(no)
- :
- $3
-fi
-])
-
-dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables
-dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever])
-dnl it's all white-space separated
-AC_DEFUN(AC_REMOVE_FORBIDDEN,
-[ __val=$$1
-  __forbid=" $2 "
-  if test -n "$__val"; then
-    __new=""
-    ac_save_IFS=$IFS
-    IFS=" 	"
-    for i in $__val; do
-      case "$__forbid" in
-        *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;;
-	*) # Careful to not add spaces, where there were none, because otherwise
-	   # libtool gets confused, if we change e.g. CXX
-	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
-      esac
-    done
-    IFS=$ac_save_IFS
-    $1=$__new
-  fi
-])
-
-dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given
-AC_DEFUN(AC_VALIDIFY_CXXFLAGS,
-[dnl
-if test "x$kde_use_qt_emb" != "xyes"; then
- AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath])
- AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath])
-else
- AC_REMOVE_FORBIDDEN(CXX, [-rpath])
- AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath])
-fi
-])
-
-AC_DEFUN(AC_CHECK_COMPILERS,
-[
-  AC_ARG_ENABLE(debug,[  --enable-debug[=ARG]    enables debug symbols (yes|no|full) [default=no]],
-  [
-    case $enableval in
-      yes)
-        kde_use_debug_code="yes"
-        kde_use_debug_define=no
-        ;;
-      full)
-        kde_use_debug_code="full"
-        kde_use_debug_define=no
-        ;;
-      *)
-        kde_use_debug_code="no"
-        kde_use_debug_define=yes
-        ;;
-    esac
-  ], 
-    [kde_use_debug_code="no"
-      kde_use_debug_define=no
-  ])
-
-  dnl Just for configure --help
-  AC_ARG_ENABLE(dummyoption,[  --disable-debug         disables debug output and debug symbols [default=no]],[],[])
-
-  AC_ARG_ENABLE(strict,[  --enable-strict         compiles with strict compiler options (may not work!)],
-   [
-    if test $enableval = "no"; then
-         kde_use_strict_options="no"
-       else
-         kde_use_strict_options="yes"
-    fi
-   ], [kde_use_strict_options="no"])
-
-  AC_ARG_ENABLE(warnings,[  --disable-warnings      disables compilation with -Wall and similiar],
-   [
-    if test $enableval = "no"; then
-         kde_use_warnings="no"
-       else
-         kde_use_warnings="yes"
-    fi
-   ], [kde_use_warnings="yes"])
-
-  dnl enable warnings for debug build
-  if test "$kde_use_debug_code" != "no"; then
-    kde_use_warnings=yes
-  fi
-
-  AC_ARG_ENABLE(profile,[  --enable-profile        creates profiling infos [default=no]],
-    [kde_use_profiling=$enableval],
-    [kde_use_profiling="no"]
-  )
-
-  dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS
-  CFLAGS=" $CFLAGS"
-
-  AC_PROG_CC 
-
-  AC_PROG_CPP
-
-  if test "$GCC" = "yes"; then
-    if test "$kde_use_debug_code" != "no"; then
-      if test $kde_use_debug_code = "full"; then
-        CFLAGS="-g3 $CFLAGS"
-      else
-        CFLAGS="-g -O2 $CFLAGS"
-      fi
-    else
-      CFLAGS="-O2 $CFLAGS"
-    fi
-  fi
-
-  if test "$kde_use_debug_define" = "yes"; then
-    CFLAGS="-DNDEBUG $CFLAGS"
-  fi
-
-
-  case "$host" in
-  *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";;
-  *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";;
-  esac
-
-  if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
-     LDFLAGS=""
-  fi
-
-  CXXFLAGS=" $CXXFLAGS"
-
-  AC_PROG_CXX
-
-  if test "$GXX" = "yes" || test "$CXX" = "KCC"; then
-    if test "$kde_use_debug_code" != "no"; then
-      if test "$CXX" = "KCC"; then
-        CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
-      else
-        if test "$kde_use_debug_code" = "full"; then
-          CXXFLAGS="-g3 $CXXFLAGS"
-        else
-          CXXFLAGS="-g -O2 $CXXFLAGS"
-        fi
-      fi
-      KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"])
-
-      dnl convenience compiler flags
-      KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""])
-      AC_SUBST(WOVERLOADED_VIRTUAL)
-    else
-      if test "$CXX" = "KCC"; then
-        CXXFLAGS="+K3 $CXXFLAGS"
-      else
-        CXXFLAGS="-O2 $CXXFLAGS"
-      fi  
-    fi
-  fi
-
-  if test "$kde_use_debug_define" = "yes"; then
-    CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS"
-  fi  
-
-  if test "$kde_use_profiling" = "yes"; then
-    KDE_CHECK_COMPILER_FLAG(pg,
-    [
-      CFLAGS="-pg $CFLAGS"
-      CXXFLAGS="-pg $CXXFLAGS"
-    ])
-  fi
-
-  if test "$kde_use_warnings" = "yes"; then
-      if test "$GCC" = "yes"; then
-        case $host in
-          *-*-linux-gnu)	
-            CFLAGS="-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS"
-            CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS"
-            KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"; CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"])
-          ;;
-        esac
-        CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
-        KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"])
-        KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"])
-        KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"])
-     fi
-  fi
-
-  if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then
-    CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS"
-  fi
-    
-  if test "$GXX" = "yes"; then
-    KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"])
-    KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"])
-    KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"])
-    KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS=	)
-  fi
-  if test "$CXX" = "KCC"; then
-    dnl unfortunately we currently cannot disable exception support in KCC
-    dnl because doing so is binary incompatible and Qt by default links with exceptions :-(
-    dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"])
-    dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS=	)
-
-    AC_ARG_ENABLE(pch,[  --enable-pch            enables precompiled header support (currently only KCC) [default=no]],
-    [
-      kde_use_pch=$enableval
-    ],[kde_use_pch=no])
- 
-    if test "$kde_use_pch" = "yes"; then
-      dnl TODO: support --pch-dir!
-      KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"])
-      dnl the below works (but the dir must exist), but it's
-      dnl useless for a whole package.
-      dnl The are precompiled headers for each source file, so when compiling
-      dnl from scratch, it doesn't make a difference, and they take up
-      dnl around ~5Mb _per_ sourcefile.
-      dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp,
-      dnl   [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"])
-    fi
-    dnl this flag controls inlining. by default KCC inlines in optimisation mode
-    dnl all implementations that are defined inside the class {} declaration. 
-    dnl because of templates-compatibility with broken gcc compilers, this
-    dnl can cause excessive inlining. This flag limits it to a sane level
-    KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"])
-    KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"])
-    KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"])
-    KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"])
-    dnl Some source files are shared between multiple executables
-    dnl (or libraries) and some of those need template instantiations.
-    dnl In that case KCC needs to compile those sources with
-    dnl --one_instantiation_per_object.  To make it easy for us we compile
-    dnl _all_ objects with that flag (--one_per is a shorthand).
-    KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"])
-  fi
-  AC_SUBST(USE_EXCEPTIONS)
-  dnl obsolete macro - provided to keep things going
-  USE_RTTI=
-  AC_SUBST(USE_RTTI)
-
-  case "$host" in
-      *-*-irix*)  test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;;
-      *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";;
-      *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";;
-      *-*-solaris*) 
-        if test "$GXX" = yes; then
-          libstdcpp=`$CXX -print-file-name=libstdc++.so`
-          if test ! -f $libstdcpp; then
-             AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so])
-          fi
-        fi
-        ;;
-  esac
-
-  AC_VALIDIFY_CXXFLAGS
-
-  AC_PROG_CXXCPP
-
-  if test "$GCC" = yes; then
-     NOOPT_CFLAGS=-O0
-  fi
-  KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0])
-
-  AC_SUBST(NOOPT_CXXFLAGS)
-  AC_SUBST(NOOPT_CFLAGS)
-
-  KDE_CHECK_FINAL
-  KDE_CHECK_CLOSURE
-  KDE_CHECK_NMCHECK
-
-  ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), [])
-])
-
-AC_DEFUN(KDE_ADD_DEPENDENCIES,
-[
-   [A]M_DEPENDENCIES(CC)
-   [A]M_DEPENDENCIES(CXX)
-])
-
-dnl just a wrapper to clean up configure.in
-AC_DEFUN(KDE_PROG_LIBTOOL,
-[
-AC_REQUIRE([AC_CHECK_COMPILERS])
-AC_REQUIRE([AC_ENABLE_SHARED])
-AC_REQUIRE([AC_ENABLE_STATIC])
-
-AC_REQUIRE([AC_LIBTOOL_DLOPEN])
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-AC_LANG_SAVE
-AC_LANG_C
-AC_OBJEXT
-AC_EXEEXT
-AC_LANG_RESTORE
-
-AM_PROG_LIBTOOL
-AC_LIBTOOL_CXX
-
-LIBTOOL_SHELL="/bin/sh ./libtool"
-#  LIBTOOL="$LIBTOOL --silent"
-KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)"
-AC_SUBST(KDE_PLUGIN)
-
-AC_ARG_ENABLE(objprelink, [  --enable-objprelink     prelink apps using objprelink (obsolete)],
-       kde_use_objprelink=$enableval, kde_use_objprelink=no)
-  if test "x$kde_use_objprelink" = "xyes"; then 
-        AC_MSG_WARN([
-------------------------------------------------------------
-Configuration option --enable-objprelink is no longer useful.
-See http:://objprelink.sourceforge.net for details:
-1- Recent binutils are fast enough to do without objprelink.
-2- Newer versions of objprelink do not need this option.
-------------------------------------------------------------
-])
-  fi
-])
-
-AC_DEFUN(KDE_CHECK_LIB64,
-[
-    tdelibsuff=none
-    AC_ARG_ENABLE(libsuffix,
-        AC_HELP_STRING([--enable-libsuffix],
-            [/lib directory suffix (64,32,none[=default])]),
-            tdelibsuff=$enableval)
-    # TODO: add an auto case that compiles a little C app to check
-    # where the glibc is
-    if test "$tdelibsuff" = "none"; then
-       tdelibsuff=
-    fi
-    if test -z "$tdelibsuff"; then
-        AC_MSG_RESULT([not using lib directory suffix])
-        AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories)
-    else
-        if test "$libdir" = '${exec_prefix}/lib'; then
-            libdir="$libdir${tdelibsuff}"
-            AC_SUBST([libdir], ["$libdir"])  dnl ugly hack for lib64 platforms
-        fi
-        AC_DEFINE_UNQUOTED(KDELIBSUFF, ["\"${tdelibsuff}\""], Suffix for lib directories)
-        AC_MSG_RESULT([using lib directory suffix $tdelibsuff])
-    fi
-])
-
-AC_DEFUN(KDE_CHECK_TYPES,
-[  AC_CHECK_SIZEOF(int, 4)dnl
-  AC_CHECK_SIZEOF(long, 4)dnl
-  AC_CHECK_SIZEOF(char *, 4)dnl
-])dnl
-
-AC_DEFUN(KDE_DO_IT_ALL,
-[
-AC_CANONICAL_SYSTEM
-AC_ARG_PROGRAM
-AM_INIT_AUTOMAKE($1, $2)
-AM_DISABLE_LIBRARIES
-AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde})
-AC_CHECK_COMPILERS
-KDE_PROG_LIBTOOL
-AM_KDE_WITH_NLS
-AC_PATH_KDE
-])
-
-AC_DEFUN(AC_CHECK_RPATH,
-[
-AC_MSG_CHECKING(for rpath)
-AC_ARG_ENABLE(rpath,
-      [  --disable-rpath         do not use the rpath feature of ld],
-      USE_RPATH=$enableval, USE_RPATH=yes)
-
-if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
-
-  KDE_RPATH="-R \$(kde_libraries)"
-
-  if test -n "$qt_libraries"; then
-    KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
-  fi
-  dnl $x_libraries is set to /usr/lib in case
-  if test -n "$X_LDFLAGS"; then
-    X_RPATH="-R \$(x_libraries)" 
-    KDE_RPATH="$KDE_RPATH $X_RPATH"
-  fi
-  if test -n "$KDE_EXTRA_RPATH"; then
-    KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
-  fi
-fi
-AC_SUBST(KDE_EXTRA_RPATH)
-AC_SUBST(KDE_RPATH)
-AC_SUBST(X_RPATH)
-AC_MSG_RESULT($USE_RPATH)
-])
-
-dnl Check for the type of the third argument of getsockname
-AC_DEFUN(AC_CHECK_SOCKLEN_T, [
-  AC_MSG_CHECKING(for socklen_t)
-  AC_CACHE_VAL(ac_cv_socklen_t, [
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <sys/socket.h>
-      ],[
-socklen_t a=0;
-getsockname(0,(struct sockaddr*)0, &a);
-      ],
-      ac_cv_socklen_t=socklen_t,
-      AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <sys/socket.h>
-        ],[
-int a=0;
-getsockname(0,(struct sockaddr*)0, &a);
-        ],
-        ac_cv_socklen_t=int,
-        ac_cv_socklen_t=size_t
-      )
-    )
-    AC_LANG_RESTORE
-  ])
-
-  AC_MSG_RESULT($ac_cv_socklen_t)
-  if test "$ac_cv_socklen_t" != "socklen_t"; then
-    AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t,
-        [Define the real type of socklen_t])
-  fi
-  AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define])
-
-])
-
-dnl This is a merge of some macros out of the gettext aclocal.m4
-dnl since we don't need anything, I took the things we need
-dnl the copyright for them is:
-dnl >
-dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-dnl This Makefile.in is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-dnl >
-dnl for this file it is relicensed under LGPL
-
-AC_DEFUN(AM_KDE_WITH_NLS,
-  [
-    dnl If we use NLS figure out what method
-
-    AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt,
-        [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt)
-    AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-
-     if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
-        AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it])
-        GMSGFMT=":"
-      fi
-      MSGFMT=$GMSGFMT
-      AC_SUBST(GMSGFMT)
-      AC_SUBST(MSGFMT)
-
-      AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext,
-	[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext programs is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-     AC_SUBST(XGETTEXT)
-
-  ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-# serial 1
-# Stephan Kulow: I appended a _KDE against name conflicts
-
-dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES])
-    fi
-  fi])
-
-dnl From Jim Meyering.
-dnl FIXME: migrate into libit.
-
-AC_DEFUN([AM_FUNC_OBSTACK],
-[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack,
- [AC_TRY_LINK([#include "obstack.h"],
-	      [struct obstack *mem;obstack_free(mem,(char *) 0)],
-	      am_cv_func_obstack=yes,
-	      am_cv_func_obstack=no)])
- if test $am_cv_func_obstack = yes; then
-   AC_DEFINE(HAVE_OBSTACK)
- else
-   LIBOBJS="$LIBOBJS obstack.o"
- fi
-])
-
-dnl From Jim Meyering.  Use this if you use the GNU error.[ch].
-dnl FIXME: Migrate into libit
-
-AC_DEFUN([AM_FUNC_ERROR_AT_LINE],
-[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line,
- [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");],
-              am_cv_lib_error_at_line=yes,
-	      am_cv_lib_error_at_line=no)])
- if test $am_cv_lib_error_at_line = no; then
-   LIBOBJS="$LIBOBJS error.o"
- fi
- AC_SUBST(LIBOBJS)dnl
-])
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-# Stephan Kulow: I put a KDE in it to avoid name conflicts
-
-AC_DEFUN(AM_KDE_GNU_GETTEXT,
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-   AC_REQUIRE([AM_KDE_WITH_NLS])dnl
-   AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
-   AC_MSG_CHECKING(for stpcpy)
-   AC_CACHE_VAL(kde_cv_func_stpcpy,
-   [
-   kde_safe_cxxflags=$CXXFLAGS
-   CXXFLAGS="-Werror"
-   AC_LANG_SAVE
-   AC_LANG_CPLUSPLUS
-   AC_TRY_COMPILE([
-   #include <string.h>
-   ],
-   [
-   char buffer[200];
-   stpcpy(buffer, buffer);
-   ],
-   kde_cv_func_stpcpy=yes,
-   kde_cv_func_stpcpy=no)
-   AC_LANG_RESTORE
-   CXXFLAGS=$kde_safe_cxxflags
-   ])
-   AC_MSG_RESULT($kde_cv_func_stpcpy)
-   if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then
-     AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy])
-   fi
-
-   AM_LC_MESSAGES
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-  ])
-
-AC_DEFUN(AC_HAVE_XPM,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$XPM_LDFLAGS" && XPM_LDFLAGS=
- test -z "$XPM_INCLUDE" && XPM_INCLUDE=
-
- AC_ARG_WITH(xpm, [  --without-xpm           disable color pixmap XPM tests],
-	xpm_test=$withval, xpm_test="yes")
- if test "x$xpm_test" = xno; then
-   ac_cv_have_xpm=no
- else
-   AC_MSG_CHECKING(for XPM)
-   AC_CACHE_VAL(ac_cv_have_xpm,
-   [
-    AC_LANG_C
-    ac_save_ldflags="$LDFLAGS"
-    ac_save_cflags="$CFLAGS"
-    if test "x$kde_use_qt_emb" != "xyes"; then
-      LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET"
-    else
-      LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET"
-    fi
-    CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES"
-    test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS"
-    AC_TRY_LINK([#include <X11/xpm.h>],[],
-	ac_cv_have_xpm="yes",ac_cv_have_xpm="no")
-    LDFLAGS="$ac_save_ldflags"
-    CFLAGS="$ac_save_cflags"
-   ])dnl
-
-  if test "$ac_cv_have_xpm" = no; then
-    AC_MSG_RESULT(no)
-    XPM_LDFLAGS=""
-    XPMINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support])
-    if test "$XPM_LDFLAGS" = ""; then
-       XPMLIB='-lXpm $(LIB_X11)'
-    else
-       XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)'
-    fi
-    if test "$XPM_INCLUDE" = ""; then
-       XPMINC=""
-    else
-       XPMINC="-I$XPM_INCLUDE"
-    fi
-    AC_MSG_RESULT(yes)
-    $1
-  fi
- fi
- AC_SUBST(XPMINC)
- AC_SUBST(XPMLIB)
-])
-
-AC_DEFUN(AC_HAVE_DPMS,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS=
- test -z "$DPMS_INCLUDE" && DPMS_INCLUDE=
- DPMS_LIB=
-
- AC_ARG_WITH(dpms, [  --without-dpms          disable DPMS power saving],
-	dpms_test=$withval, dpms_test="yes")
- if test "x$dpms_test" = xno; then
-   ac_cv_have_dpms=no
- else
-   AC_MSG_CHECKING(for DPMS)
-   dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms.
-   dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms".
-   AC_CACHE_VAL(ac_cv_have_dpms,
-   [
-    if test "x$kde_use_qt_emb" = "xyes"; then
-      AC_MSG_RESULT(no)
-      ac_cv_have_dpms="no"
-    else
-      AC_LANG_C
-      ac_save_ldflags="$LDFLAGS"
-      ac_save_cflags="$CFLAGS"
-      ac_save_libs="$LIBS"
-      LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
-      CFLAGS="$CFLAGS $X_INCLUDES"
-      test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
-      AC_TRY_LINK([
-	  #include <X11/Xproto.h>
-	  #include <X11/X.h>
-	  #include <X11/Xlib.h>
-	  #include <X11/extensions/dpms.h>
-	  int foo_test_dpms()
-	  { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
-	  ac_cv_have_dpms="yes", [
-              LDFLAGS="$ac_save_ldflags"
-              CFLAGS="$ac_save_cflags"
-              LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET"
-              LIBS="$LIBS -lXdpms"
-              CFLAGS="$CFLAGS $X_INCLUDES"
-              test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS"
-              AC_TRY_LINK([
-	          #include <X11/Xproto.h>
-        	  #include <X11/X.h>
-        	  #include <X11/Xlib.h>
-        	  #include <X11/extensions/dpms.h>
-        	  int foo_test_dpms()
-        	  { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[],
-        	  [
-                  ac_cv_have_dpms="-lXdpms"
-                  ],ac_cv_have_dpms="no")
-              ])
-      LDFLAGS="$ac_save_ldflags"
-      CFLAGS="$ac_save_cflags"
-      LIBS="$ac_save_libs"
-    fi
-   ])dnl
-
-  if test "$ac_cv_have_dpms" = no; then
-    AC_MSG_RESULT(no)
-    DPMS_LDFLAGS=""
-    DPMSINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support])
-    if test "$ac_cv_have_dpms" = "-lXdpms"; then
-       DPMS_LIB="-lXdpms"
-    fi
-    if test "$DPMS_LDFLAGS" = ""; then
-       DPMSLIB="$DPMS_LIB "'$(LIB_X11)'
-    else
-       DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)'
-    fi
-    if test "$DPMS_INCLUDE" = ""; then
-       DPMSINC=""
-    else
-       DPMSINC="-I$DPMS_INCLUDE"
-    fi
-    AC_MSG_RESULT(yes)
-    $1
-  fi
- fi
- AC_SUBST(DPMSINC)
- AC_SUBST(DPMSLIB)
-])
-
-AC_DEFUN(AC_HAVE_GL,
- [AC_REQUIRE_CPP()dnl
-  AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-
- test -z "$GL_LDFLAGS" && GL_LDFLAGS=
- test -z "$GL_INCLUDE" && GL_INCLUDE=
-
- AC_ARG_WITH(gl, [  --without-gl            disable 3D GL modes],
-	gl_test=$withval, gl_test="yes")
- if test "x$kde_use_qt_emb" = "xyes"; then
-   # GL and Qt Embedded is a no-go for now.
-   ac_cv_have_gl=no
- elif test "x$gl_test" = xno; then
-   ac_cv_have_gl=no
- else
-   AC_MSG_CHECKING(for GL)
-   AC_CACHE_VAL(ac_cv_have_gl,
-   [
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_save_ldflags="$LDFLAGS"
-    ac_save_cxxflags="$CXXFLAGS"
-    LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU"
-    test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11"
-    LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET"
-    CXXFLAGS="$CFLAGS $X_INCLUDES"
-    test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
-    AC_TRY_LINK([#include <GL/gl.h>
-#include <GL/glu.h>
-], [],
-	ac_cv_have_gl="mesa", ac_cv_have_gl="no")
-    if test "x$ac_cv_have_gl" = "xno"; then
-      LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGLU -lGL"
-      test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11"
-      LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET"
-      CXXFLAGS="$ac_save_cflags $X_INCLUDES"
-      test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS"
-      AC_TRY_LINK([#include <GL/gl.h>
-#include <GL/glu.h>
-], [],
-	  ac_cv_have_gl="yes", ac_cv_have_gl="no")
-    fi
-    AC_LANG_RESTORE
-    LDFLAGS="$ac_save_ldflags"
-    CXXFLAGS="$ac_save_cxxflags"
-   ])dnl
-
-  if test "$ac_cv_have_gl" = "no"; then
-    AC_MSG_RESULT(no)
-    GL_LDFLAGS=""
-    GLINC=""
-    $2
-  else
-    AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)])
-    if test "$GL_LDFLAGS" = ""; then
-       if test "$ac_cv_have_gl" = "mesa"; then
-          GLLIB='-lMesaGLU -lMesaGL $(LIB_X11)'
-       else
-          GLLIB='-lGLU -lGL $(LIB_X11)'
-       fi
-    else
-       if test "$ac_cv_have_gl" = "mesa"; then
-          GLLIB="$GL_LDFLAGS -lMesaGLU -lMesaGL "'$(LIB_X11)'
-       else
-          GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)'
-       fi
-    fi
-    if test "$GL_INCLUDE" = ""; then
-       GLINC=""
-    else
-       GLINC="-I$GL_INCLUDE"
-    fi
-    AC_MSG_RESULT($ac_cv_have_gl)
-    $1
-  fi
- fi
- AC_SUBST(GLINC)
- AC_SUBST(GLLIB)
-])
-
-
- dnl shadow password and PAM magic - maintained by ossi@kde.org
-
-AC_DEFUN(KDE_PAM, [
-  AC_REQUIRE([KDE_CHECK_LIBDL])
-
-  AC_ARG_WITH(pam,
-    [  --with-pam[=ARG]        enable support for PAM: ARG=[yes|no|service name]],
-    [ if test "x$withval" = "xyes"; then
-        use_pam=yes
-        pam_service=kde
-      elif test "x$withval" = "xno"; then
-        use_pam=no
-      else
-        use_pam=yes
-        pam_service=$withval
-      fi
-      ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service"
-    ], [
-      AC_CACHE_VAL(ac_cv_path_pam,
-        [ use_pam=no
-          AC_CHECK_LIB(pam, pam_start,
-            [ AC_CHECK_HEADER(security/pam_appl.h,
-                [ use_pam=yes
-                  pam_service=kde ]) 
-            ], , $LIBDL)
-          ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service"
-        ])
-    ])
-  eval "$ac_cv_path_pam"
-
-  AC_MSG_CHECKING(for PAM)
-  if test "x$use_pam" = xno; then
-    AC_MSG_RESULT(no)
-    PAMLIBS=""
-  else
-    AC_MSG_RESULT(yes)
-    AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)])
-    PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL"
-
-    dnl test whether struct pam_message is const (Linux) or not (Sun)
-    AC_MSG_CHECKING(for const pam_message)
-    AC_EGREP_HEADER([struct pam_message], security/pam_appl.h,
-      [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h,
-                        [AC_MSG_RESULT([const: Linux-type PAM])],
-                        [AC_MSG_RESULT([nonconst: Sun-type PAM])
-                        AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])]
-                        )],
-      [AC_MSG_RESULT([not found - assume const, Linux-type PAM])])
-  fi
-
-  AC_SUBST(PAMLIBS)
-])
-
-dnl DEF_PAM_SERVICE(arg name, full name, define name)
-AC_DEFUN(DEF_PAM_SERVICE, [
-  AC_ARG_WITH($1-pam,
-    [  --with-$1-pam=[val]    override PAM service from --with-pam for $2],
-    [ if test "x$use_pam" = xyes; then
-        $3_PAM_SERVICE="$withval"
-      else
-        AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected.
-You may want to enforce it by using --with-pam.])
-      fi
-    ], 
-    [ if test "x$use_pam" = xyes; then
-        $3_PAM_SERVICE="$pam_service"
-      fi
-    ])
-    if test -n "$$3_PAM_SERVICE"; then
-      AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE])
-      AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2])
-    fi
-    AC_SUBST($3_PAM_SERVICE)
-])
-
-AC_DEFUN(KDE_SHADOWPASSWD, [
-  AC_REQUIRE([KDE_PAM])
-
-  AC_CHECK_LIB(shadow, getspent,
-    [ LIBSHADOW="-lshadow"
-      ac_use_shadow=yes
-    ],
-    [ dnl for UnixWare
-      AC_CHECK_LIB(gen, getspent, 
-        [ LIBGEN="-lgen"
-          ac_use_shadow=yes
-        ], 
-        [ AC_CHECK_FUNC(getspent, 
-            [ ac_use_shadow=yes ],
-            [ ac_use_shadow=no ])
-	])
-    ])
-  AC_SUBST(LIBSHADOW)
-  AC_SUBST(LIBGEN)
-  
-  AC_MSG_CHECKING([for shadow passwords])
-
-  AC_ARG_WITH(shadow,
-    [  --with-shadow		  If you want shadow password support ],
-    [ if test "x$withval" != "xno"; then
-        use_shadow=yes
-      else
-        use_shadow=no
-      fi
-    ], [
-      use_shadow="$ac_use_shadow"
-    ])
-
-  if test "x$use_shadow" = xyes; then
-    AC_MSG_RESULT(yes)
-    AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords])
-  else
-    AC_MSG_RESULT(no)
-    LIBSHADOW=
-    LIBGEN=
-  fi
-
-  dnl finally make the relevant binaries setuid root, if we have shadow passwds.
-  dnl this still applies, if we could use it indirectly through pam.
-  if test "x$use_shadow" = xyes || 
-     ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then
-      case $host in
-      *-*-freebsd* | *-*-netbsd* | *-*-openbsd*)
-	SETUIDFLAGS="-m 4755 -o root";;
-      *)
-	SETUIDFLAGS="-m 4755";;
-      esac
-  fi
-  AC_SUBST(SETUIDFLAGS)
-
-])
-
-AC_DEFUN(KDE_PASSWDLIBS, [
-  AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT
-  AC_REQUIRE([KDE_PAM])
-  AC_REQUIRE([KDE_SHADOWPASSWD])
-
-  if test "x$use_pam" = "xyes"; then 
-    PASSWDLIBS="$PAMLIBS"
-  else
-    PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN"
-  fi
-
-  dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but
-  dnl /etc/master.passwd holds the actual passwords.  /etc/master.passwd requires
-  dnl root to read, so kcheckpass needs to be root (even when using pam, since pam
-  dnl may need to read /etc/master.passwd).
-  case $host in
-  *-*-freebsd*)
-    SETUIDFLAGS="-m 4755 -o root"
-    ;;
-  *)
-    ;;
-  esac
-
-  AC_SUBST(PASSWDLIBS)
-])
-
-AC_DEFUN(KDE_CHECK_LIBDL,
-[
-AC_CHECK_LIB(dl, dlopen, [
-LIBDL="-ldl"
-ac_cv_have_dlfcn=yes
-])
-
-AC_CHECK_LIB(dld, shl_unload, [
-LIBDL="-ldld"
-ac_cv_have_shload=yes
-])
-
-AC_SUBST(LIBDL)
-])
-
-AC_DEFUN(KDE_CHECK_DLOPEN,
-[
-KDE_CHECK_LIBDL
-AC_CHECK_HEADERS(dlfcn.h dl.h)
-if test "$ac_cv_header_dlfcn_h" = "no"; then
-  ac_cv_have_dlfcn=no
-fi
-
-if test "$ac_cv_header_dl_h" = "no"; then
-  ac_cv_have_shload=no
-fi
-
-dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE
-dnl (MM)
-AC_ARG_ENABLE(dlopen,
-[  --disable-dlopen        link statically [default=no]] ,
-enable_dlopen=$enableval,
-enable_dlopen=yes)
-
-# override the user's opinion, if we know it better ;)
-if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then
-  enable_dlopen=no
-fi
-
-if test "$ac_cv_have_dlfcn" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn])
-fi
-
-if test "$ac_cv_have_shload" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload])
-fi
-
-if test "$enable_dlopen" = no ; then
-  test -n "$1" && eval $1
-else
-  test -n "$2" && eval $2
-fi
-
-])
-
-AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING,
-[
-KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no)
-KDE_PROG_LIBTOOL
-AC_MSG_CHECKING([dynamic loading])
-eval "`egrep '^build_libtool_libs=' libtool`"
-if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then
-  dynamic_loading=yes
-  AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING)
-else
-  dynamic_loading=no
-fi
-AC_MSG_RESULT($dynamic_loading)
-if test "$dynamic_loading" = "yes"; then
-  $1
-else
-  $2
-fi
-])
-
-AC_DEFUN(KDE_ADD_INCLUDES,
-[
-if test -z "$1"; then
-  test_include="Pix.h"
-else
-  test_include="$1"
-fi
-
-AC_MSG_CHECKING([for libg++ ($test_include)])
-
-AC_CACHE_VAL(kde_cv_libgpp_includes,
-[
-kde_cv_libgpp_includes=no
-
-   for ac_dir in               \
-                               \
-     /usr/include/g++          \
-     /usr/include              \
-     /usr/unsupported/include  \
-     /opt/include              \
-     $extra_include            \
-     ; \
-   do
-     if test -r "$ac_dir/$test_include"; then
-       kde_cv_libgpp_includes=$ac_dir
-       break
-     fi
-   done
-])
-
-AC_MSG_RESULT($kde_cv_libgpp_includes)
-if test "$kde_cv_libgpp_includes" != "no"; then
-  all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES"
-fi
-])
-])
-
-
-AC_DEFUN(KDE_CHECK_MICO,
-[
-AC_REQUIRE([KDE_CHECK_LIBDL])
-AC_REQUIRE([KDE_MISC_TESTS])
-AC_MSG_CHECKING(for MICO)
-
-if test -z "$MICODIR"; then
-    kde_micodir=/usr/local
- else
-    kde_micodir="$MICODIR"
-fi
-
-AC_ARG_WITH(micodir,
-  [  --with-micodir=micodir  where mico is installed ],
-  kde_micodir=$withval,
-  kde_micodir=$kde_micodir
-)
-
-AC_CACHE_VAL(kde_cv_mico_incdir,
-[
-  mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
-AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
-
-])
-kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
-
-if test ! -r  $kde_micodir/include/CORBA.h; then
-  AC_MSG_ERROR([No CORBA.h found, specify another micodir])
-fi
-
-AC_MSG_RESULT($kde_micodir)
-
-MICO_INCLUDES=-I$kde_micodir/include
-AC_SUBST(MICO_INCLUDES)
-MICO_LDFLAGS=-L$kde_micodir/lib
-AC_SUBST(MICO_LDFLAGS)
-micodir=$kde_micodir
-AC_SUBST(micodir)
-
-AC_MSG_CHECKING([for MICO version])
-AC_CACHE_VAL(kde_cv_mico_version,
-[
-AC_LANG_C
-cat >conftest.$ac_ext <<EOF
-#include <stdio.h>
-#include <mico/version.h>
-int main() {
-
-   printf("MICO_VERSION=%s\n",MICO_VERSION);
-   return (0);
-}
-EOF
-ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
-if AC_TRY_EVAL(ac_compile); then
-  if eval `./conftest 2>&5`; then
-    kde_cv_mico_version=$MICO_VERSION
-  else
-    AC_MSG_ERROR([your system is not able to execute a small application to
-    find MICO version! Check $kde_micodir/include/mico/version.h])
-  fi
-else
-  AC_MSG_ERROR([your system is not able to compile a small application to
-  find MICO version! Check $kde_micodir/include/mico/version.h])
-fi
-])
-
-dnl installed MICO version
-mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
-mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
-mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
-
-if test "x$1" = "x"; then
- req_version="2.3.0"
-else
- req_version=$1
-fi
-
-dnl required MICO version
-req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
-req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
-req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
-
-if test "$mico_v_maj" -lt "$req_v_maj" || \
-   ( test "$mico_v_maj" -eq "$req_v_maj" && \
-        test "$mico_v_mid" -lt "$req_v_mid" ) || \
-   ( test "$mico_v_mid" -eq "$req_v_mid" && \
-        test "$mico_v_min" -lt "$req_v_min" )
-
-then
-  AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
-at least is required. You should upgrade MICO.])
-else
-  AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
-fi
-
-LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
-AC_SUBST(LIBMICO)
-if test -z "$IDL"; then
-  IDL='$(kde_bindir)/cuteidl'
-fi
-AC_SUBST(IDL)
-IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
-AC_SUBST(IDL_DEPENDENCIES)
-
-idldir="\$(includedir)/idl"
-AC_SUBST(idldir)
-
-])
-
-AC_DEFUN(KDE_CHECK_MINI_STL,
-[
-AC_REQUIRE([KDE_CHECK_MICO])
-
-AC_MSG_CHECKING(if we use mico's mini-STL)
-AC_CACHE_VAL(kde_cv_have_mini_stl,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-kde_save_cxxflags="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
-AC_TRY_COMPILE(
-[
-#include <mico/config.h>
-],
-[
-#ifdef HAVE_MINI_STL
-#error "nothing"
-#endif
-],
-kde_cv_have_mini_stl=no,
-kde_cv_have_mini_stl=yes)
-CXXFLAGS="$kde_save_cxxflags"
-AC_LANG_RESTORE
-])
-
-if test "x$kde_cv_have_mini_stl" = "xyes"; then
-   AC_MSG_RESULT(yes)
-   $1
-else
-   AC_MSG_RESULT(no)
-   $2
-fi
-])
-
-])
-
-
-AC_DEFUN(KDE_CHECK_LIBPTHREAD,
-[
-AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] )
-AC_SUBST(LIBPTHREAD)
-])
-
-AC_DEFUN(KDE_CHECK_PTHREAD_OPTION,
-[
-    AC_ARG_ENABLE(kernel-threads, [  --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.],
-	kde_use_kernthreads=$enableval, kde_use_kernthreads=no)
-
-    if test "$kde_use_kernthreads" = "yes"; then
-      ac_save_CXXFLAGS="$CXXFLAGS"
-      ac_save_CFLAGS="$CFLAGS"
-      CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
-      CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
-      AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h)
-      CXXFLAGS="$ac_save_CXXFLAGS"
-      CFLAGS="$ac_save_CFLAGS"
-      if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
-        kde_use_kernthreads=no
-      else
-        dnl Add proper -I and -l statements
-        AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD
-        if test "x$LIBPTHREAD" = "x"; then
-          kde_use_kernthreads=no
-        else
-          USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
-        fi
-      fi
-    else 
-      USE_THREADS=""
-      if test -z "$LIBPTHREAD"; then
-        KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] )
-      fi
-    fi
-
-    AH_VERBATIM(__svr_define, [
-#if defined(__SVR4) && !defined(__svr4__)
-#define __svr4__ 1
-#endif
-])
-    case $host_os in
- 	solaris*)
-		KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"])
-                CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4"
-    		;;
-        freebsd*)
-                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
-                ;;
-        aix*)
-                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
-                LIBPTHREAD="$LIBPTHREAD -lc_r"
-                ;;
-        linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
-                if test "$CXX" = "KCC"; then
-                  CXXFLAGS="$CXXFLAGS --thread_safe"
-		  NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe"
-                fi
-                ;;
-	*)
-		;;
-    esac
-    AC_SUBST(USE_THREADS)
-    AC_SUBST(LIBPTHREAD)
-])
-
-AC_DEFUN(KDE_CHECK_THREADING,
-[
-  AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
-  AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION])
-  dnl default is yes if libpthread is found and no if no libpthread is available
-  if test -z "$LIBPTHREAD"; then
-    if test -z "$USE_THREADS"; then
-      kde_check_threading_default=no
-    else
-      kde_check_threading_default=yes
-    fi
-  else
-    kde_check_threading_default=yes
-  fi
-  AC_ARG_ENABLE(threading, [  --disable-threading     disables threading even if libpthread found ],
-   kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default)
-  if test "x$kde_use_threading" = "xyes"; then
-    AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)])
-  fi
-])
-
-AC_DEFUN(KDE_TRY_LINK_PYTHON,
-[
-if test "$kde_python_link_found" = no; then
-
-if test "$1" = normal; then
-  AC_MSG_CHECKING(if a Python application links)
-else
-  AC_MSG_CHECKING(if Python depends on $2)
-fi
-
-AC_CACHE_VAL(kde_cv_try_link_python_$1,
-[
-AC_LANG_SAVE
-AC_LANG_C
-kde_save_cflags="$CFLAGS"
-CFLAGS="$CFLAGS $PYTHONINC"
-kde_save_libs="$LIBS"
-LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET"
-kde_save_ldflags="$LDFLAGS"
-LDFLAGS="$LDFLAGS $PYTHONLIB"
-
-AC_TRY_LINK(
-[
-#include <Python.h>
-],[
-	PySys_SetArgv(1, 0);
-],
-	[kde_cv_try_link_python_$1=yes],
-	[kde_cv_try_link_python_$1=no]
-)
-CFLAGS="$kde_save_cflags"
-LIBS="$kde_save_libs"
-LDFLAGS="$kde_save_ldflags"
-])
-
-if test "$kde_cv_try_link_python_$1" = "yes"; then
-  AC_MSG_RESULT(yes)
-  kde_python_link_found=yes
-  if test ! "$1" = normal; then
-    LIBPYTHON="$LIBPYTHON $2"
-  fi
-  $3
-else
-  AC_MSG_RESULT(no)
-  $4
-fi
-AC_LANG_RESTORE
-
-fi
-
-])
-
-AC_DEFUN(KDE_CHECK_PYTHON_DIR,
-[
-AC_MSG_CHECKING([for Python directory])
- 
-AC_CACHE_VAL(kde_cv_pythondir,
-[
-  if test -z "$PYTHONDIR"; then
-    kde_cv_pythondir=/usr/local
-  else
-    kde_cv_pythondir="$PYTHONDIR"
-  fi
-])
- 
-AC_ARG_WITH(pythondir,
-[  --with-pythondir=pythondir   use python installed in pythondir ],
-[
-  ac_python_dir=$withval
-], ac_python_dir=$kde_cv_pythondir
-)
- 
-AC_MSG_RESULT($ac_python_dir)
-])
-
-AC_DEFUN(KDE_CHECK_PYTHON_INTERN,
-[
-AC_REQUIRE([KDE_CHECK_LIBDL])
-AC_REQUIRE([KDE_CHECK_LIBPTHREAD])
-AC_REQUIRE([KDE_CHECK_PYTHON_DIR])
-
-if test -z "$1"; then
-  version="1.5"
-else
-  version="$1"
-fi
-
-AC_MSG_CHECKING([for Python$version])
-
-python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes"
-AC_FIND_FILE(Python.h, $python_incdirs, python_incdir)
-if test ! -r $python_incdir/Python.h; then
-  AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir)
-  python_incdir=$python_incdir/python$version
-  if test ! -r $python_incdir/Python.h; then
-    python_incdir=no
-  fi
-fi
-
-PYTHONINC=-I$python_incdir
-
-python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
-AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir)
-if test ! -r $python_libdir/libpython$version.a; then
-  AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir)
-  python_libdir=$python_libdir/python$version/config
-  if test ! -r $python_libdir/libpython$version.a; then
-    python_libdir=no
-  fi
-fi
-
-PYTHONLIB=-L$python_libdir
-kde_orig_LIBPYTHON=$LIBPYTHON
-if test -z "$LIBPYTHON"; then
-  LIBPYTHON=-lpython$version
-fi
-
-python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs"
-AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir)
-python_moddir=$python_moddir/python$version
-if test ! -r $python_moddir/copy.py; then
-  python_moddir=no
-fi
-
-PYTHONMODDIR=$python_moddir
-
-AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir)
-
-if test x$python_incdir = xno ||  test x$python_libdir = xno ||  test x$python_moddir = xno; then
-   LIBPYTHON=$kde_orig_LIBPYTHON
-   test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB=""
-   test "x$PYTHONINC" = "x-Ino" && PYTHONINC=""
-   $2
-else 
-  dnl Note: this test is very weak
-  kde_python_link_found=no
-  KDE_TRY_LINK_PYTHON(normal)
-  KDE_TRY_LINK_PYTHON(m, -lm)
-  KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD)
-  KDE_TRY_LINK_PYTHON(tcl, -ltcl)
-  KDE_TRY_LINK_PYTHON(db2, -ldb2)
-  KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil])
-  KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil])
-  KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm])
-  KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses])
-  KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [],
-	[AC_MSG_WARN([it seems, Python depends on another library.
-    Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this
-    and contact the authors to let them know about this problem])
-	])
-
-  LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET"
-  AC_SUBST(PYTHONINC)
-  AC_SUBST(PYTHONLIB)
-  AC_SUBST(LIBPYTHON)
-  AC_SUBST(PYTHONMODDIR)
-  AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python])
-fi
-
-])
-
-
-AC_DEFUN(KDE_CHECK_PYTHON,
-[
-  KDE_CHECK_PYTHON_INTERN("2.3", 
-   [KDE_CHECK_PYTHON_INTERN("2.2", 
-     [KDE_CHECK_PYTHON_INTERN("2.1", 
-       [KDE_CHECK_PYTHON_INTERN("2.0", 
-         [KDE_CHECK_PYTHON_INTERN($1, $2) ])
-       ])
-     ])
-   ])
-])
-
-AC_DEFUN(KDE_CHECK_STL_SGI,
-[
-    AC_MSG_CHECKING([if STL implementation is SGI like])
-    AC_CACHE_VAL(kde_cv_stl_type_sgi,
-    [
-      AC_TRY_COMPILE([
-#include <string>
-using namespace std;
-],[
-  string astring="Hallo Welt.";
-  astring.erase(0, 6); // now astring is "Welt"
-  return 0;
-], kde_cv_stl_type_sgi=yes,
-   kde_cv_stl_type_sgi=no)
-])
-
-   AC_MSG_RESULT($kde_cv_stl_type_sgi)
-
-   if test "$kde_cv_stl_type_sgi" = "yes"; then
-	AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI])
-   fi
-])
-
-AC_DEFUN(KDE_CHECK_STL_HP,
-[
-    AC_MSG_CHECKING([if STL implementation is HP like])
-    AC_CACHE_VAL(kde_cv_stl_type_hp,
-    [
-      AC_TRY_COMPILE([
-#include <string>
-using namespace std;
-],[
-  string astring="Hello World";
-  astring.remove(0, 6); // now astring is "World"
-  return 0;
-], kde_cv_stl_type_hp=yes,
-   kde_cv_stl_type_hp=no)
-])
-   AC_MSG_RESULT($kde_cv_stl_type_hp)
-
-   if test "$kde_cv_stl_type_hp" = "yes"; then
-	AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP])
-   fi
-])
-
-AC_DEFUN(KDE_CHECK_STL,
-[
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_save_CXXFLAGS="$CXXFLAGS"
-    CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`"
-    KDE_CHECK_STL_SGI
-
-    if test "$kde_cv_stl_type_sgi" = "no"; then
-       KDE_CHECK_STL_HP
-
-       if test "$kde_cv_stl_type_hp" = "no"; then
-         AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?")
-       fi
-    fi
-
-    CXXFLAGS="$ac_save_CXXFLAGS"
-    AC_LANG_RESTORE
-])
-
-AC_DEFUN(AC_FIND_QIMGIO,
-   [AC_REQUIRE([AC_FIND_JPEG])
-AC_REQUIRE([KDE_CHECK_EXTRA_LIBS])
-AC_MSG_CHECKING([for qimgio])
-AC_CACHE_VAL(ac_cv_lib_qimgio,
-[
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-ac_save_LIBS="$LIBS"
-ac_save_CXXFLAGS="$CXXFLAGS"
-LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT"
-CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
-AC_TRY_RUN(dnl
-[
-#include <qimageio.h>
-#include <ntqstring.h>
-int main() {
-		QString t = "hallo";
-		t.fill('t');
-		qInitImageIO();
-}
-],
-            ac_cv_lib_qimgio=yes,
-            ac_cv_lib_qimgio=no,
-	    ac_cv_lib_qimgio=no)
-LIBS="$ac_save_LIBS"
-CXXFLAGS="$ac_save_CXXFLAGS"
-AC_LANG_RESTORE
-])dnl
-if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then
-  LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG"
-  AC_MSG_RESULT(yes)
-  AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available])
-  AC_SUBST(LIBQIMGIO)
-else
-  AC_MSG_RESULT(not found)
-fi
-])
-
-AC_DEFUN(KDE_CHECK_ANSI,
-[
-])
-
-AC_DEFUN(KDE_CHECK_INSURE,
-[
-  AC_ARG_ENABLE(insure, [  --enable-insure             use insure++ for debugging [default=no]],
-  [
-  if test $enableval = "no"; dnl
-	then ac_use_insure="no"
-	else ac_use_insure="yes"
-   fi
-  ], [ac_use_insure="no"])
-
-  AC_MSG_CHECKING(if we will use Insure++ to debug)
-  AC_MSG_RESULT($ac_use_insure)
-  if test "$ac_use_insure" = "yes"; dnl
-       then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
-   fi
-])
-
-AC_DEFUN(AM_DISABLE_LIBRARIES,
-[
-    AC_PROVIDE([AM_ENABLE_STATIC])
-    AC_PROVIDE([AM_ENABLE_SHARED])
-    enable_static=no
-    enable_shared=yes
-])
-
-
-AC_DEFUN(AC_CHECK_UTMP_FILE,
-[
-    AC_MSG_CHECKING([for utmp file])
-
-    AC_CACHE_VAL(kde_cv_utmp_file,
-    [
-    kde_cv_utmp_file=no
-
-    for ac_file in    \
-                      \
-	/var/run/utmp \
-	/var/adm/utmp \
-	/etc/utmp     \
-     ; \
-    do
-     if test -r "$ac_file"; then
-       kde_cv_utmp_file=$ac_file
-       break
-     fi
-    done
-    ])
-
-    if test "$kde_cv_utmp_file" != "no"; then
-	AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries])
-	$1
-	AC_MSG_RESULT($kde_cv_utmp_file)
-    else
-    	$2
-	AC_MSG_RESULT([non found])
-    fi
-])
-
-
-AC_DEFUN(KDE_CREATE_SUBDIRSLIST,
-[
-
-DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
-
-if test ! -s $srcdir/subdirs; then
-  dnl Note: Makefile.common creates subdirs, so this is just a fallback
-  TOPSUBDIRS=""
-  files=`cd $srcdir && ls -1`
-  dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
-  for i in $dirs; do
-    echo $i >> $srcdir/subdirs
-  done
-fi
-
-if test -s $srcdir/inst-apps; then
-  ac_topsubdirs="`cat $srcdir/inst-apps`"
-else
-  ac_topsubdirs="`cat $srcdir/subdirs`"
-fi
-
-for i in $ac_topsubdirs; do
-  AC_MSG_CHECKING([if $i should be compiled])
-  if test -d $srcdir/$i; then
-    install_it="yes"
-    for j in $DO_NOT_COMPILE; do
-      if test $i = $j; then
-        install_it="no"
-      fi
-    done
-  else
-    install_it="no"
-  fi
-  AC_MSG_RESULT($install_it)
-  vari=`echo $i | sed -e 's,[[-+.]],_,g'`
-  if test $install_it = "yes"; then
-    TOPSUBDIRS="$TOPSUBDIRS $i"
-    eval "$vari""_SUBDIR_included=yes"
-  else
-    eval "$vari""_SUBDIR_included=no"
-  fi
-done
-
-AC_SUBST(TOPSUBDIRS)
-])
-
-AC_DEFUN(KDE_CHECK_NAMESPACES,
-[
-AC_MSG_CHECKING(whether C++ compiler supports namespaces)
-AC_LANG_SAVE
-AC_LANG_CPLUSPLUS
-AC_TRY_COMPILE([
-],
-[
-namespace Foo {
-  extern int i;
-  namespace Bar {
-    extern int i;
-  }
-}
-
-int Foo::i = 0;
-int Foo::Bar::i = 1;
-],[
-  AC_MSG_RESULT(yes)
-  AC_DEFINE(HAVE_NAMESPACES)
-], [
-AC_MSG_RESULT(no)
-])
-AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_NEWLIBS,
-[
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_CHECK_S_ISSOCK,
-[
-AC_MSG_CHECKING(for S_ISSOCK)
-AC_CACHE_VAL(ac_cv_have_s_issock,
-[
-AC_LANG_SAVE
-AC_LANG_C
-AC_TRY_LINK(
-[
-#include <sys/stat.h>
-],
-[
-struct stat buff;
-int b = S_ISSOCK( buff.st_mode );
-],
-ac_cv_have_s_issock=yes,
-ac_cv_have_s_issock=no)
-AC_LANG_RESTORE
-])
-AC_MSG_RESULT($ac_cv_have_s_issock)
-if test "$ac_cv_have_s_issock" = "yes"; then
-  AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.])
-fi
-
-AH_VERBATIM(_ISSOCK,
-[
-#ifndef HAVE_S_ISSOCK
-#define HAVE_S_ISSOCK
-#define S_ISSOCK(mode) (1==0)
-#endif
-])
-
-])
-
-dnl ------------------------------------------------------------------------
-dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(AC_CHECK_KDEMAXPATHLEN,
-[
-AC_MSG_CHECKING(for MAXPATHLEN)
-AC_CACHE_VAL(ac_cv_maxpathlen,
-[
-AC_LANG_C
-cat > conftest.$ac_ext <<EOF
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-#include <sys/param.h>
-#ifndef MAXPATHLEN
-#define MAXPATHLEN 1024
-#endif
-
-KDE_HELLO MAXPATHLEN
-
-EOF
-
-ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out"
-
-if AC_TRY_EVAL(ac_try) && test -s conftest.out; then
-    ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out`
-else
-    ac_cv_maxpathlen=1024
-fi
-
-rm conftest.*
-
-])
-AC_MSG_RESULT($ac_cv_maxpathlen)
-AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] )
-])
-
-AC_DEFUN(KDE_CHECK_HEADER,
-[
-   AC_LANG_SAVE
-   kde_safe_cppflags=$CPPFLAGS
-   CPPFLAGS="$CPPFLAGS $all_includes"
-   AC_LANG_CPLUSPLUS
-   AC_CHECK_HEADER($1, $2, $3, $4)
-   CPPFLAGS=$kde_safe_cppflags
-   AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_CHECK_HEADERS,
-[
-   AH_CHECK_HEADERS([$1])
-   AC_LANG_SAVE
-   kde_safe_cppflags=$CPPFLAGS
-   CPPFLAGS="$CPPFLAGS $all_includes"
-   AC_LANG_CPLUSPLUS
-   AC_CHECK_HEADERS([$1], [$2], [$3], [$4])
-   CPPFLAGS=$kde_safe_cppflags
-   AC_LANG_RESTORE
-])
-
-AC_DEFUN(KDE_FAST_CONFIGURE,
-[
-  dnl makes configure fast (needs perl)
-  AC_ARG_ENABLE(fast-perl, [  --disable-fast-perl     disable fast Makefile generation (needs perl)],
-      with_fast_perl=$enableval, with_fast_perl=yes)
-])
-
-AC_DEFUN(KDE_CONF_FILES,
-[
-  val=
-  if test -f $srcdir/configure.files ; then
-    val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
-  fi
-  CONF_FILES=
-  if test -n "$val" ; then
-    for i in $val ; do
-      CONF_FILES="$CONF_FILES $i"
-    done
-  fi
-  AC_SUBST(CONF_FILES)
-])dnl
-
-AC_DEFUN(KDE_SET_PREFIX,
-[
-  unset CDPATH
-  dnl make $TDEDIR the default for the installation
-  AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde})
-
-  if test "x$prefix" = "xNONE"; then
-    prefix=$ac_default_prefix
-    ac_configure_args="$ac_configure_args --prefix=$prefix"
-  fi
-  # And delete superflous '/' to make compares easier
-  prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
-  exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
-  KDE_FAST_CONFIGURE
-  KDE_CONF_FILES
-])
-
-pushdef([AC_PROG_INSTALL],
-[
-  dnl our own version, testing for a -p flag
-  popdef([AC_PROG_INSTALL])
-  dnl as AC_PROG_INSTALL works as it works we first have
-  dnl to save if the user didn't specify INSTALL, as the
-  dnl autoconf one overwrites INSTALL and we have no chance to find
-  dnl out afterwards
-  test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
-  test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
-  test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
-  AC_PROG_INSTALL
-
-  if test -z "$kde_save_INSTALL_given" ; then
-    # OK, user hasn't given any INSTALL, autoconf found one for us
-    # now we test, if it supports the -p flag
-    AC_MSG_CHECKING(for -p flag to install)
-    rm -f confinst.$$.* > /dev/null 2>&1
-    echo "Testtest" > confinst.$$.orig
-    ac_res=no
-    if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
-      if test -f confinst.$$.new ; then
-        # OK, -p seems to do no harm to install
-	INSTALL="${INSTALL} -p"
-	ac_res=yes
-      fi
-    fi
-    rm -f confinst.$$.*
-    AC_MSG_RESULT($ac_res)
-  fi
-  dnl the following tries to resolve some signs and wonders coming up
-  dnl with different autoconf/automake versions
-  dnl e.g.:
-  dnl  *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s
-  dnl   and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS)
-  dnl   it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s
-  dnl  *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has
-  dnl   INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the
-  dnl   install-@DIR@PROGRAMS targets to explicitly use that flag
-  dnl  *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as
-  dnl   INSTALL_SCRIPT, which breaks with automake <= 1.4
-  dnl  *autoconf >2.13 (since 10.Apr 1999) has not that failure
-  dnl  *sometimes KDE does not use the install-@DIR@PROGRAM targets from
-  dnl   automake (due to broken Makefile.am or whatever) to install programs,
-  dnl   and so does not see the -s flag in automake > 1.4
-  dnl to clean up that mess we:
-  dnl  +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG
-  dnl   which cleans KDE's program with automake > 1.4;
-  dnl  +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems
-  dnl   with automake<=1.4
-  dnl  note that dues to this sometimes two '-s' flags are used (if KDE
-  dnl   properly uses install-@DIR@PROGRAMS, but I don't care
-  dnl
-  dnl And to all this comes, that I even can't write in comments variable
-  dnl  names used by automake, because it is so stupid to think I wanted to
-  dnl  _use_ them, therefor I have written A_M_... instead of AM_
-  dnl hmm, I wanted to say something ... ahh yes: Arghhh.
-
-  if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
-    INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
-  fi
-  if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
-    INSTALL_SCRIPT='${INSTALL}'
-  fi
-])dnl
-
-AC_DEFUN(KDE_LANG_CPLUSPLUS,
-[AC_LANG_CPLUSPLUS
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
-pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS])
-])
-
-pushdef([AC_LANG_CPLUSPLUS],
-[popdef([AC_LANG_CPLUSPLUS])
-KDE_LANG_CPLUSPLUS
-])
-
-AC_DEFUN(KDE_CHECK_LONG_LONG,
-[
-AC_MSG_CHECKING(for long long)
-AC_CACHE_VAL(kde_cv_c_long_long,
-[
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-  AC_TRY_LINK([], [
-  long long foo = 0;
-  foo = foo+1;
-  ],
-  kde_cv_c_long_long=yes, kde_cv_c_long_long=no)
-  AC_LANG_RESTORE
-])
-AC_MSG_RESULT($kde_cv_c_long_long)
-if test "$kde_cv_c_long_long" = yes; then
-   AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype])
-fi
-])
-
-AC_DEFUN(KDE_CHECK_LIB,
-[
-     kde_save_LDFLAGS="$LDFLAGS"
-     dnl AC_CHECK_LIB modifies LIBS, so save it here
-     kde_save_LIBS="$LIBS"
-     LDFLAGS="$LDFLAGS $all_libraries"
-     case $host_os in
-      aix*) LDFLAGS="-brtl $LDFLAGS"
-	test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS"
-	;;
-     esac
-     AC_CHECK_LIB($1, $2, $3, $4, $5)
-     LDFLAGS="$kde_save_LDFLAGS"
-     LIBS="$kde_save_LIBS"
-])
-
-AC_DEFUN(KDE_JAVA_PREFIX,
-[
-	dir=`dirname "$1"`
-	base=`basename "$1"`
-	list=`ls -1 $dir 2> /dev/null`
-	for entry in $list; do 
-		if test -d $dir/$entry/bin; then
-			case $entry in
-			   $base)
-				javadirs="$javadirs $dir/$entry/bin"
-				;;
-			esac
-		elif test -d $dir/$entry/jre/bin; then
-			case $entry in
-			   $base)
-				javadirs="$javadirs $dir/$entry/jre/bin"
-				;;
-			esac
-		fi
-	done
-])
-
-dnl KDE_CHEC_JAVA_DIR(onlyjre)
-AC_DEFUN(KDE_CHECK_JAVA_DIR,
-[
-
-AC_ARG_WITH(java,
-[  --with-java=javadir     use java installed in javadir, --without-java disables ],
-[  ac_java_dir=$withval
-], ac_java_dir=""
-)
-
-AC_MSG_CHECKING([for Java])
-
-dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH
-if test "x$ac_java_dir" = "xno"; then
-   kde_java_bindir=no
-   kde_java_includedir=no
-   kde_java_libjvmdir=no
-   kde_java_libhpidir=no
-else
-  if test "x$ac_java_dir" = "x"; then
-     
-     
-      dnl No option set -> look in $PATH
-      KDE_JAVA_PREFIX(/usr/j2se)
-      KDE_JAVA_PREFIX(/usr/j*dk*)
-      KDE_JAVA_PREFIX(/usr/lib/j*dk*)
-      KDE_JAVA_PREFIX(/opt/j*sdk*)
-      KDE_JAVA_PREFIX(/usr/lib/java*)
-      KDE_JAVA_PREFIX(/usr/java*)
-      KDE_JAVA_PREFIX(/usr/java/j*dk*)
-      KDE_JAVA_PREFIX(/usr/java/j*re*)
-      KDE_JAVA_PREFIX(/usr/lib/SunJava2*)
-      KDE_JAVA_PREFIX(/usr/lib/SunJava*)
-      KDE_JAVA_PREFIX(/usr/lib/IBMJava2*)
-      KDE_JAVA_PREFIX(/usr/lib/IBMJava*)
-      KDE_JAVA_PREFIX(/opt/java*)
-    
-      kde_cv_path="NONE"
-      kde_save_IFS=$IFS
-      IFS=':'
-      for dir in $PATH; do
-	  javadirs="$javadirs $dir"
-      done
-      IFS=$kde_save_IFS
-      jredirs=
-
-      for dir in $javadirs; do
-	  if test ! -d $dir; then break; fi
-          if test -x "$dir/java"; then
-                libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1`
-		if test ! -f $libjvmdir/libjvm.so; then continue; fi
-		jredirs="$jredirs $dir"
-	  fi
-      done
-
-      JAVAC=
-      JAVA=
-      kde_java_bindir=no
-      for dir in $jredirs; do
-	  JAVA="$dir/java"
-	  kde_java_bindir=$dir
-	  if test -x "$dir/javac"; then
-		JAVAC="$dir/javac"
-                break
-	  fi
-      done
-
-      if test -n "$JAVAC"; then
-          dnl this substitution might not work - well, we test for jni.h below
-          kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'`
-      else
-          kde_java_includedir=no
-      fi
-  else
-    dnl config option set
-    kde_java_bindir=$ac_java_dir/bin
-    if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then
-	kde_java_includedir=no
-    else
-        kde_java_includedir=$ac_java_dir/include
-    fi
-  fi
-fi
-
-dnl At this point kde_java_bindir and kde_java_includedir are either set or "no"
-if test "x$kde_java_bindir" != "xno"; then
-
-  dnl Look for libjvm.so
-  kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1`
-  dnl Look for libhpi.so and avoid green threads
-  kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1`
-
-  dnl Now check everything's fine under there
-  dnl the include dir is our flag for having the JDK
-  if test -d "$kde_java_includedir"; then
-    if test ! -x "$kde_java_bindir/javac"; then
-      AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.])
-    fi
-    if test ! -x "$kde_java_bindir/javah"; then
-      AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-    fi
-    if test ! -x "$kde_java_bindir/jar"; then
-      AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-    fi
-    if test ! -r "$kde_java_includedir/jni.h"; then
-      AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.])
-    fi
-
-    jni_includes="-I$kde_java_includedir"
-    dnl Strange thing, jni.h requires jni_md.h which is under genunix here..
-    dnl and under linux here..
-    test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux"
-    test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris"
-    test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix"
-
-  else
-    JAVAC=
-    jni_includes=
-  fi
-
-  if test ! -r "$kde_java_libjvmdir/libjvm.so"; then
-     AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.])
-  fi 
-
-  if test ! -x "$kde_java_bindir/java"; then
-      AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.])
-  fi
-
-  if test ! -r "$kde_java_libhpidir/libhpi.so"; then
-    AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.])
-  fi
-
-  if test -n "$jni_includes"; then
-    dnl Check for JNI version
-    AC_LANG_SAVE
-    AC_LANG_CPLUSPLUS
-    ac_cxxflags_safe="$CXXFLAGS"
-    CXXFLAGS="$CXXFLAGS $all_includes $jni_includes"
-
-    AC_TRY_COMPILE([
-  #include <jni.h>
-	      ],
-	      [
-  #ifndef JNI_VERSION_1_2
-  Syntax Error
-  #endif
-	      ],[ kde_jni_works=yes ],
-	      [ kde_jni_works=no ])
-
-    if test $kde_jni_works = no; then
-      AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h.
-		    You need to have Java Development Kit (JDK) version 1.2. 
-
-		    Use --with-java to specify another location.
-		    Use --without-java to configure without java support.
-		    Or download a newer JDK and try again. 
-		    See e.g. http://java.sun.com/products/jdk/1.2 ])
-    fi
-
-    CXXFLAGS="$ac_cxxflags_safe"    
-    AC_LANG_RESTORE
-
-    dnl All tests ok, inform and subst the variables
-
-    JAVAC=$kde_java_bindir/javac
-    JAVAH=$kde_java_bindir/javah
-    JAR=$kde_java_bindir/jar
-    AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is])
-    JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi"
-    AC_MSG_RESULT([java JDK in $kde_java_bindir])
-
-  else
-      AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is])
-      AC_MSG_RESULT([java JRE in $kde_java_bindir])
-  fi
-else # no
-  AC_MSG_RESULT([none found])
-fi
-
-AC_SUBST(JAVAC)
-AC_SUBST(JAVAH)
-AC_SUBST(JAR)
-AC_SUBST(JVMLIBS)
-AC_SUBST(jni_includes)
-
-# for backward compat
-kde_cv_java_includedir=$kde_java_includedir
-kde_cv_java_bindir=$kde_java_bindir
-])
-
-dnl this is a redefinition of autoconf 2.5x's AC_FOREACH.
-dnl When the argument list becomes big, as in KDE for AC_OUTPUT in
-dnl big packages, m4_foreach is dog-slow.  So use our own version of
-dnl it.  (matz@kde.org)
-m4_define([mm_foreach],
-[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])])
-m4_define([mm_car], [[$1]])
-m4_define([mm_car2], [[$@]])
-m4_define([_mm_foreach],
-[m4_if(m4_quote($2), [], [],
-       [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1],
-                                                   mm_car2(m4_shift($2)),
-                                                   [$3])])])
-m4_define([AC_FOREACH],
-[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])])
-
-AC_DEFUN(KDE_NEED_FLEX,
-[
-kde_libs_safe=$LIBS
-LIBS="$LIBS $USER_LDFLAGS"
-AM_PROG_LEX
-LIBS=$kde_libs_safe
-if test -z "$LEXLIB"; then
-    AC_MSG_ERROR([You need to have flex installed.])
-fi
-AC_SUBST(LEXLIB)
-])
-
-AC_DEFUN(AC_PATH_QTOPIA,
-[
-  dnl TODO: use AC_CACHE_VAL
-
-  if test -z "$1"; then
-    qtopia_minver_maj=1
-    qtopia_minver_min=5
-    qtopia_minver_pat=0
-  else
-    qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"`
-    qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"`
-    qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"`
-  fi
-
-  qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat"
-  qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat"
-
-  AC_REQUIRE([AC_PATH_QT])
-
-  AC_MSG_CHECKING([for Qtopia])
-
-  LIB_QTOPIA="-lqpe"
-  AC_SUBST(LIB_QTOPIA)
-
-  kde_qtopia_dirs="$QPEDIR /opt/Qtopia"
-
-  ac_qtopia_incdir=NO
-
-  AC_ARG_WITH(qtopia-dir,
-              [  --with-qtopia-dir=DIR   where the root of Qtopia is installed ],
-              [  ac_qtopia_incdir="$withval"/include] ) 
-  
-  qtopia_incdirs=""
-  for dir in $kde_qtopia_dirs; do
-    qtopia_incdirs="$qtopia_incdirs $dir/include"
-  done
-
-  if test ! "$ac_qtopia_incdir" = "NO"; then
-    qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs"
-  fi
-
-  qtopia_incdir=""
-  AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir)
-  ac_qtopia_incdir="$qtopia_incdir"
-
-  if test -z "$qtopia_incdir"; then
-    AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.])
-  fi
-
-  qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`;
-  qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`;
-  qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`;
-
-  qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat"
-  qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat"
-  if test "$qtopia_ver" -lt "$qtopia_minver"; then
-    AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr
-is required.])
-  fi
-
-  AC_LANG_SAVE
-  AC_LANG_CPLUSPLUS
-
-  ac_cxxflags_safe="$CXXFLAGS"
-  ac_ldflags_safe="$LDFLAGS"
-  ac_libs_safe="$LIBS"
-
-  CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes"
-  LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
-  LIBS="$LIBS $LIB_QTOPIA $LIBQT"
-
-  cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <qpe/qpeapplication.h>
-#include <qpe/version.h>
-
-int main( int argc, char **argv )
-{
-    QPEApplication app( argc, argv );
-    return 0;
-}
-EOF
-
-  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-    rm -f conftest*
-  else
-    rm -f conftest*
-    AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at
-the end of config.log])
-  fi
-
-  CXXFLAGS="$ac_cxxflags_safe"
-  LDFLAGS="$ac_ldflags_safe"
-  LIBS="$ac_libs_safe"
-
-  AC_LANG_RESTORE
-
-  QTOPIA_INCLUDES="-I$qtopia_incdir"
-  AC_SUBST(QTOPIA_INCLUDES)
-
-  AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir])
-])
-
-
-AC_DEFUN(KDE_INIT_DOXYGEN,
-[
-AC_MSG_CHECKING([for Qt docs])
-kde_qtdir=
-if test "${with_qt_dir+set}" = set; then
-  kde_qtdir="$with_qt_dir"
-fi
-
-AC_FIND_FILE(ntqsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR)
-AC_MSG_RESULT($QTDOCDIR)
-
-AC_SUBST(QTDOCDIR)
-
-KDE_FIND_PATH(dot, DOT, [], [])
-if test -n "$DOT"; then
-  KDE_HAVE_DOT="YES"
-else
-  KDE_HAVE_DOT="NO"
-fi
-AC_SUBST(KDE_HAVE_DOT)
-KDE_FIND_PATH(doxygen, DOXYGEN, [], [])
-AC_SUBST(DOXYGEN)
-
-DOXYGEN_PROJECT_NAME="$1"
-DOXYGEN_PROJECT_NUMBER="$2"
-AC_SUBST(DOXYGEN_PROJECT_NAME)
-AC_SUBST(DOXYGEN_PROJECT_NUMBER)
-
-KDE_HAS_DOXYGEN=no
-if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/ntqsql.html; then
-  KDE_HAS_DOXYGEN=yes
-fi
-AC_SUBST(KDE_HAS_DOXYGEN)
-
-])
-
-
-AC_DEFUN(AC_FIND_BZIP2,
-[
-AC_MSG_CHECKING([for bzDecompress in libbz2])
-AC_CACHE_VAL(ac_cv_lib_bzip2,
-[
-AC_LANG_C
-kde_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-AC_TRY_LINK(dnl
-[
-#define BZ_NO_STDIO
-#include<bzlib.h>
-],
-            [ bz_stream s; (void) bzDecompress(&s); ],
-            eval "ac_cv_lib_bzip2='-lbz2'",
-            eval "ac_cv_lib_bzip2=no")
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-])dnl
-AC_MSG_RESULT($ac_cv_lib_bzip2)
-
-if test ! "$ac_cv_lib_bzip2" = no; then
-  BZIP2DIR=bzip2
-
-  LIBBZ2="$ac_cv_lib_bzip2"
-  AC_SUBST(LIBBZ2)
-
-else
-
-   cxx_shared_flag=
-   ld_shared_flag=
-   KDE_CHECK_COMPILER_FLAG(shared, [
-	ld_shared_flag="-shared"
-   ])
-   KDE_CHECK_COMPILER_FLAG(fPIC, [
-        cxx_shared_flag="-fPIC"
-   ])
-
-   AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2])
-   AC_CACHE_VAL(ac_cv_lib_bzip2_prefix,
-   [
-   AC_LANG_CPLUSPLUS
-   kde_save_LIBS="$LIBS"
-   LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET"
-   kde_save_CXXFLAGS="$CXXFLAGS"
-   CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES"
-
-   AC_TRY_LINK(dnl
-   [
-   #define BZ_NO_STDIO
-   #include<bzlib.h>
-   ],
-               [ bz_stream s; (void) BZ2_bzDecompress(&s); ],
-               eval "ac_cv_lib_bzip2_prefix='-lbz2'",
-               eval "ac_cv_lib_bzip2_prefix=no")
-   LIBS="$kde_save_LIBS"
-   CXXFLAGS="$kde_save_CXXFLAGS"
-   ])dnl
-
-   AC_MSG_RESULT($ac_cv_lib_bzip2_prefix)
-   
-
-
-   if test ! "$ac_cv_lib_bzip2_prefix" = no; then
-     BZIP2DIR=bzip2
-    
-     LIBBZ2="$ac_cv_lib_bzip2_prefix"
-     AC_SUBST(LIBBZ2)
-
-     AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix])
-   dnl else, we just ignore this
-   fi
-
-fi
-AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR")
-])
-
-dnl ------------------------------------------------------------------------
-dnl Try to find the SSL headers and libraries.
-dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed)
-dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed)
-dnl ------------------------------------------------------------------------
-dnl
-AC_DEFUN(KDE_CHECK_SSL,
-[
-LIBSSL="-lssl -lcrypto"
-AC_REQUIRE([KDE_CHECK_LIB64])
-
-ac_ssl_includes=NO ac_ssl_libraries=NO
-ssl_libraries=""
-ssl_includes=""
-AC_ARG_WITH(ssl-dir,
-    [  --with-ssl-dir=DIR      where the root of OpenSSL is installed],
-    [  ac_ssl_includes="$withval"/include
-       ac_ssl_libraries="$withval"/lib$tdelibsuff
-    ])
-
-want_ssl=yes
-AC_ARG_WITH(ssl,
-    [  --without-ssl           disable SSL checks],
-    [want_ssl=$withval])
-
-if test $want_ssl = yes; then
-
-AC_MSG_CHECKING(for OpenSSL)
-
-AC_CACHE_VAL(ac_cv_have_ssl,
-[#try to guess OpenSSL locations
-  
-  ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes"
-  ssl_incdirs="$ac_ssl_includes $ssl_incdirs"
-  AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir)
-  ac_ssl_includes="$ssl_incdir"
-
-  ssl_libdirs="/usr/lib$tdelibsuff /usr/local/lib$tdelibsuff /usr/ssl/lib$tdelibsuff /usr/local/ssl/lib$tdelibsuff $libdir $prefix/lib$tdelibsuff $exec_prefix/lib$tdelibsuff $kde_extra_libs"
-  if test ! "$ac_ssl_libraries" = "NO"; then
-    ssl_libdirs="$ac_ssl_libraries $ssl_libdirs"
-  fi
-
-  test=NONE
-  ssl_libdir=NONE
-  for dir in $ssl_libdirs; do
-    try="ls -1 $dir/libssl*"
-    if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi
-  done
-
-  ac_ssl_libraries="$ssl_libdir"
-
-  AC_LANG_SAVE
-  AC_LANG_C
-
-  ac_cflags_safe="$CFLAGS"
-  ac_ldflags_safe="$LDFLAGS"
-  ac_libs_safe="$LIBS"
-
-  CFLAGS="$CFLAGS -I$ssl_incdir $all_includes"
-  LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries"
-  LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref"
-
-  AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();,
-  ac_ssl_rsaref="yes"
-  ,
-  ac_ssl_rsaref="no"
-  )
-
-  CFLAGS="$ac_cflags_safe"
-  LDFLAGS="$ac_ldflags_safe"
-  LIBS="$ac_libs_safe"
-
-  AC_LANG_RESTORE
-
-  if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then
-    have_ssl=no
-  else
-    have_ssl=yes;
-  fi
-
-  ])
-
-  eval "$ac_cv_have_ssl"
-
-  AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes])
-
-  AC_MSG_CHECKING([whether OpenSSL uses rsaref])
-  AC_MSG_RESULT($ac_ssl_rsaref)
-
-  AC_MSG_CHECKING([for easter eggs])
-  AC_MSG_RESULT([none found])
-
-else
-  have_ssl=no
-fi
-
-if test "$have_ssl" = yes; then
-  AC_MSG_CHECKING(for OpenSSL version)
-  dnl Check for SSL version
-  AC_CACHE_VAL(ac_cv_ssl_version,
-  [
-    AC_LANG_SAVE
-    AC_LANG_C 
-
-    cat >conftest.$ac_ext <<EOF
-#include <openssl/opensslv.h>
-#include <stdio.h>
-    int main() {
- 
-#ifndef OPENSSL_VERSION_NUMBER
-      printf("ssl_version=\\"error\\"\n");
-#else
-      if (OPENSSL_VERSION_NUMBER < 0x00906000)
-        printf("ssl_version=\\"old\\"\n");
-      else
-        printf("ssl_version=\\"ok\\"\n");
-#endif
-     return (0);
-    }
-EOF
-
-    ac_compile='${CC-gcc} $CFLAGS -I$ac_ssl_includes conftest.$ac_ext -o conftest'
-    if AC_TRY_EVAL(ac_compile); then 
-
-      if eval `./conftest 2>&5`; then
-        if test $ssl_version = error; then
-          AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !])
-        else
-          if test $ssl_version = old; then
-            AC_MSG_WARN([OpenSSL version too old. Upgrade to 1.0.6 at least, see http://www.openssl.org. SSL support disabled.])
-            have_ssl=no
-          fi
-        fi
-        ac_cv_ssl_version="ssl_version=$ssl_version"
-      else
-        AC_MSG_ERROR([Your system couldn't run a small SSL test program.
-        Check config.log, and if you can't figure it out, send a mail to 
-        David Faure <faure@kde.org>, attaching your config.log])
-      fi
-
-    else
-      AC_MSG_ERROR([Your system couldn't link a small SSL test program.
-      Check config.log, and if you can't figure it out, send a mail to 
-      David Faure <faure@kde.org>, attaching your config.log])
-    fi 
-
-    AC_LANG_RESTORE
-
-  ])
-
-  eval "$ac_cv_ssl_version"
-  AC_MSG_RESULT($ssl_version)
-fi
-
-if test "$have_ssl" != yes; then
-  LIBSSL="";
-else
-  AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL])
-  ac_cv_have_ssl="have_ssl=yes \
-    ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref"
-  
-  
-  ssl_libraries="$ac_ssl_libraries"
-  ssl_includes="$ac_ssl_includes"
-
-  if test "$ac_ssl_rsaref" = yes; then
-    LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" 
-  fi
-
-  if test $ssl_version = "old"; then
-    AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 1.0.6])
-  fi
-fi
-
-if test "$ssl_includes" = "/usr/include" || test  "$ssl_includes" = "/usr/local/include" || test -z "$ssl_includes"; then
- SSL_INCLUDES="";
-else
- SSL_INCLUDES="-I$ssl_includes"
-fi
-
-if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries"; then
- SSL_LDFLAGS=""
-else
- SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries"
-fi
-
-AC_SUBST(SSL_INCLUDES)
-AC_SUBST(SSL_LDFLAGS)
-AC_SUBST(LIBSSL)
-])
-
-AC_DEFUN(KDE_CHECK_STRLCPY,
-[
-  AC_REQUIRE([AC_CHECK_STRLCAT])
-  AC_REQUIRE([AC_CHECK_STRLCPY])
-  AC_CHECK_SIZEOF(size_t)
-  AC_CHECK_SIZEOF(unsigned long)
-
-  AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long])
-  AC_TRY_COMPILE(,[
-    #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG
-       choke me
-    #endif
-    ],AC_MSG_RESULT([yes]),[
-      AC_MSG_RESULT(no)
-      AC_MSG_ERROR([
-       Apparently on your system our assumption sizeof size_t == sizeof unsigned long 
-       does not apply. Please mail kde-devel@kde.org with a description of your system!
-      ])
-  ])
-])
-
-AC_DEFUN(KDE_CHECK_BINUTILS,
-[
-  AC_MSG_CHECKING([if ld supports unversioned version maps])
-
-  kde_save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map"
-  echo "{ local: extern \"C++\" { foo }; };" > conftest.map
-  AC_TRY_LINK([int foo;],
-[
-#ifdef __INTEL_COMPILER
-icc apparently does not support libtools version-info and version-script
-at the same time. Dunno where the bug is, but until somebody figured out,
-better disable the optional version scripts.
-#endif
-
-  foo = 42;
-], kde_supports_versionmaps=yes, kde_supports_versionmaps=no)
-  LDFLAGS="$kde_save_LDFLAGS"
-  rm -f conftest.map
-  AM_CONDITIONAL(include_VERSION_SCRIPT, 
-    [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"])
-
-  AC_MSG_RESULT($kde_supports_versionmaps)
-])
-
-AC_DEFUN([AM_PROG_OBJC],[
-AC_CHECK_PROGS(OBJC, gcc, gcc)
-test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH])
-if test "x${OBJCFLAGS-unset}" = xunset; then
-   OBJCFLAGS="-g -O2"
-fi
-AC_SUBST(OBJCFLAGS)
-_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)])
-])
diff --git a/admin/am_edit b/admin/am_edit
deleted file mode 100644
index 128b790..0000000
--- a/admin/am_edit
+++ /dev/null
@@ -1,2188 +0,0 @@
-#!/usr/bin/perl -w
-
-# Expands the specialised KDE tags in Makefile.in to (hopefully) valid
-# make syntax.
-# When called without file parameters, we work recursively on all Makefile.in
-# in and below the current subdirectory. When called with file parameters,
-# only those Makefile.in are changed.
-# The currently supported tags are
-#
-# {program}_METASOURCES
-# where you have a choice of two styles
-#   {program}_METASOURCES = name1.moc name2.moc ... [\]
-#   {program}_METASOURCES = AUTO
-#       The second style requires other tags as well.
-#
-# To install icons :
-#    KDE_ICON = iconname iconname2 ...
-#    KDE_ICON = AUTO
-#
-# For documentation :
-#    http://developer.kde.org/documentation/other/developer-faq.html
-#
-# and more new tags TBD!
-#
-# The concept (and base code) for this program came from automoc,
-# supplied by the following
-#
-# Matthias Ettrich <ettrich@kde.org>      (The originator)
-# Kalle Dalheimer <kalle@kde.org>      (The original implementator)
-# Harri Porten  <porten@tu-harburg.de>
-# Alex Zepeda  <jazepeda@pacbell.net>
-# David Faure <faure@kde.org>
-# Stephan Kulow <coolo@kde.org>
-
-use Cwd;
-use File::Find;
-use File::Basename;
-
-# Prototype the functions
-sub initialise ();
-sub processMakefile ($);
-sub updateMakefile ();
-sub restoreMakefile ();
-
-sub removeLine ($$);
-sub appendLines ($);
-sub substituteLine ($$);
-
-sub findMocCandidates ();
-sub pruneMocCandidates ($);
-sub checkMocCandidates ();
-sub addMocRules ();
-
-sub tag_AUTOMAKE ();
-sub tag_META_INCLUDES ();
-sub tag_METASOURCES ();
-sub tag_POFILES ();
-sub tag_DOCFILES ();
-sub tag_LOCALINSTALL();
-sub tag_IDLFILES();
-sub tag_UIFILES();
-sub tag_SUBDIRS();
-sub tag_ICON();
-sub tag_CLOSURE();
-sub tag_NO_UNDEFINED();
-sub tag_NMCHECK();
-sub tag_NMCHECK_GLOBAL();
-sub tag_DIST();
-sub tag_TDEINIT();
-
-# Some global globals...
-$verbose    = 0;        # a debug flag
-$thisProg   = "$0";     # This programs name
-$topdir     = cwd();    # The current directory
-@makefiles  = ();       # Contains all the files we'll process
-@foreignfiles = ();
-$start      = (times)[0]; # some stats for testing - comment out for release
-$version    = "v1.0";
-$errorflag  = 0;
-$cppExt     = "(cpp|cc|cxx|C|c\\+\\+)";
-$hExt       = "(h|H|hh|hxx|hpp|h\\+\\+)";
-$progId     = "KDE tags expanded automatically by " . basename($thisProg);
-$automkCall = "\n";
-$printname  = "";  # used to display the directory the Makefile is in
-$use_final  = 1;        # create code for --enable-final
-$cleantarget = "clean";
-$dryrun     = 0;
-$pathoption = 0;
-$foreign_libtool = 0;
-
-while (defined ($ARGV[0]))
-{
-    $_ = shift;
-    if (/^--version$/)
-    {
-        print STDOUT "\n";
-        print STDOUT basename($thisProg), " $version\n",
-                "This is really free software, unencumbered by the GPL.\n",
-                "You can do anything you like with it except sueing me.\n",
-                "Copyright 1998 Kalle Dalheimer <kalle\@kde.org>\n",
-                "Concept, design and unnecessary questions about perl\n",
-                "       by Matthias Ettrich <ettrich\@kde.org>\n\n",
-                "Making it useful by Stephan Kulow <coolo\@kde.org> and\n",
-                "Harri Porten <porten\@kde.org>\n",
-                "Updated (Feb-1999), John Birch <jb.nz\@writeme.com>\n",
-	        "Current Maintainer Stephan Kulow\n\n";
-        exit 0;
-    }
-    elsif (/^--verbose$|^-v$/)
-    {
-        $verbose = 1;       # Oh is there a problem...?
-    }
-    elsif (/^-p(.+)$|^--path=(.+)$/)
-    {
-        $thisProg = "$1/".basename($thisProg) if($1);
-        $thisProg = "$2/".basename($thisProg) if($2);
-        warn ("$thisProg doesn't exist\n")      if (!(-f $thisProg));
-        $pathoption=1;
-    }
-    elsif (/^--help$|^-h$/)
-    {
-        print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n",
-                "\n",
-                "Patches dir/Makefile.in generated by automake\n",
-                "(where dir can be an absolute or relative directory name)\n",
-                "\n",
-                "  -v, --verbose      verbosely list files processed\n",
-                "  -h, --help         print this help, then exit\n",
-                "  --version          print version number, then exit\n",
-                "  -p, --path=        use the path to am_edit if the path\n",
-                "                     called from is not the one to be used\n",
-	        "  --no-final         don't patch for --enable-final\n";
-	
-        exit 0;
-    }
-    elsif (/^--no-final$/)
-    {
-	$use_final = 0;
-        $thisProg .= " --no-final";
-    }
-    elsif (/^--foreign-libtool$/)
-    {
-        $foreign_libtool = 1;
-        $thisProg .= " --foreign-libtool";
-    }
-    elsif (/^-n$/)
-    {
-    	$dryrun = 1;
-    }
-    else
-    {
-        # user selects what input files to check
-        # add full path if relative path is given
-        $_ = cwd()."/".$_   if (! /^\//);
-        print "User wants $_\n" if ($verbose);
-        push (@makefiles, $_);
-    }
-}
-
-if ($thisProg =~ /^\// && !$pathoption )
-{
-  print STDERR "Illegal full pathname call performed...\n",
-      "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n",
-      "Please use option --path.\n";
-  exit 1;
-}
-
-# Only scan for files when the user hasn't entered data
-if (!@makefiles)
-{
-    print STDOUT "Scanning for Makefile.in\n"       if ($verbose);
-    find (\&add_makefile, cwd());
-    #chdir('$topdir');
-} else {
-    print STDOUT "Using input files specified by user\n"   if ($verbose);
-}
-
-foreach $makefile (sort(@makefiles))
-{
-    processMakefile ($makefile);
-    last            if ($errorflag);
-}
-
-# Just some debug statistics - comment out for release as it uses printf.
-printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start     if ($verbose);
-
-exit $errorflag;        # causes make to fail if erroflag is set
-
-#-----------------------------------------------------------------------------
-
-# In conjunction with the "find" call, this builds the list of input files
-sub add_makefile ()
-{
-  push (@makefiles, $File::Find::name) if (/Makefile.in$/);
-}
-
-#-----------------------------------------------------------------------------
-
-# Processes a single make file
-# The parameter contains the full path name of the Makefile.in to use
-sub processMakefile ($)
-{
-    # some useful globals for the subroutines called here
-    local ($makefile)       = @_;
-    local @headerdirs       = ('.');
-    local $haveAutomocTag   = 0;
-    local $MakefileData     = "";
-
-    local $cxxsuffix  = "KKK";
-
-    local @programs = ();  # lists the names of programs and libraries
-    local $program = "";
-
-    local %realObjs = ();  # lists the objects compiled into $program
-    local %sources = ();   # lists the sources used for $program
-    local %finalObjs = (); # lists the objects compiled when final
-    local %realname = ();  # the binary name of program variable
-    local %idlfiles = ();  # lists the idl files used for $program
-    local %globalmocs = ();# list of all mocfiles (in %mocFiles format)
-    local %important = (); # list of files to be generated asap
-    local %uiFiles = ();
-
-    local $allidls = "";
-    local $idl_output = "";# lists all idl generated files for cleantarget
-    local $ui_output = "";# lists all uic generated files for cleantarget
-
-    local %depedmocs = ();
-    
-    local $metasourceTags = 0;
-    local $dep_files      = "";
-    local $dep_finals     = "";
-    local %target_adds    = (); # the targets to add
-    local $kdelang        = "";
-    local @cleanfiles     = ();
-    local $cleanMoc       = "";
-    local $closure_output = "";
-
-    local %varcontent     = ();
-
-    $makefileDir = dirname($makefile);
-    chdir ($makefileDir);
-    $printname = $makefile;
-    $printname =~ s/^\Q$topdir\E\///;
-    $makefile = basename($makefile);
-
-    print STDOUT "Processing makefile $printname\n"   if ($verbose);
-
-    # Setup and see if we need to do this.
-    return      if (!initialise());
-
-    tag_AUTOMAKE ();            # Allows a "make" to redo the Makefile.in
-    tag_META_INCLUDES ();       # Supplies directories for src locations
-
-    foreach $program (@programs) {
-        $sources_changed{$program} = 0;
-        $depedmocs{$program} = "";
-        $important{$program} = "";
-	tag_IDLFILES();             # Sorts out idl rules
-	tag_NO_UNDEFINED();
-	tag_CLOSURE();
-	tag_NMCHECK();
-	tag_UIFILES();             # Sorts out ui rules
-        tag_METASOURCES ();         # Sorts out the moc rules
-        if ($sources_changed{$program}) {
-            my $lookup = "$program" . '_SOURCES\s*=\s*(.*)';
-            substituteLine($lookup, "$program\_SOURCES=" . $sources{$program});
-        }
-        if ($important{$program}) {
-            local %source_dict = ();
-            for $source (split(/[\034\s]+/, $sources{$program})) {
-                $source_dict{$source} = 1;
-            }
-            for $source (@cleanfiles) {
-                $source_dict{$source} = 0;
-            }
-            for $source (keys %source_dict) {
-                next if (!$source);
-                if ($source_dict{$source}) {
-                    # sanity check
-                    if (! -f $source) {
-                        print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n";
-                    } else {
-                        $target_adds{"\$(srcdir)/$source"} .= $important{$program};
-                    }
-                }
-            }
-        }
-    }
-    if ($cleanMoc) {
-        # Always add dist clean tag
-        # Add extra *.moc.cpp files created for USE_AUTOMOC because they
-        # aren't included in the normal *.moc clean rules.
-        appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n");
-        $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources ";
-    }
-    
-    tag_DIST() unless ($kdeopts{"noautodist"});
-
-    if ($idl_output) {
-        appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n");
-        $target_adds{"$cleantarget-am"} .= "$cleantarget-idl ";
-    }
-
-    if ($ui_output) {
-        appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n");
-        $target_adds{"$cleantarget-am"} .= "$cleantarget-ui ";
-    }
-
-    if ($closure_output) {
-        appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n");
-        $target_adds{"$cleantarget-am"} .= "$cleantarget-closures ";
-    }
-
-    if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) {
-        $kdelang = '$(KDE_LANG)'
-    } else {
-        $kdelang = '';
-    }
-
-    tag_POFILES ();             # language rules for po directory
-    tag_DOCFILES ();            # language rules for doc directories
-    tag_LOCALINSTALL();         # add $(DESTDIR) before all kde_ dirs
-    tag_ICON();
-    tag_SUBDIRS();
-    tag_NMCHECK_GLOBAL();
-
-    my $tmp = "force-reedit:\n";
-    $tmp   .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n";
-    appendLines($tmp);
-    
-    make_bcheck_target();
-    make_meta_classes();
-    tag_COMPILE_FIRST();
-    tag_FINAL() if (!$kdeopts{"nofinal"});
-    tag_TDEINIT();
-
-    my $final_lines = "final:\n\t\$(MAKE) ";
-    my $final_install_lines = "final-install:\n\t\$(MAKE) ";
-    my $nofinal_lines = "no-final:\n\t\$(MAKE) ";
-    my $nofinal_install_lines = "no-final-install:\n\t\$(MAKE) ";
-
-    foreach $program (@programs) {
-        
-        my $lookup = "$program\_OBJECTS.*=[^\n]*";
-        
-        my $new = "";
-        
-        my @list = split(/[\034\s]+/, $realObjs{$program});
-        
-        if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) {
-            
-            $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program};
-            $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program};
-            $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)";
-            $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)";
-            
-            $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" ";
-            $final_install_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" ";
-            $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" ";
-            $nofinal_install_lines .= "$program\_OBJECTS=\"\$($program\_nofinal_OBJECTS)\" ";
-        } else {
-            $new = "$program\_OBJECTS = " . $realObjs{$program};
-        }
-        substituteLine ($lookup, $new);
-    }
-    appendLines($final_lines . "all-am");
-    appendLines($final_install_lines . "install-am");
-    appendLines($nofinal_lines . "all-am");
-    appendLines($nofinal_install_lines . "install-am");
-
-    my $lookup = '(\@\S+\@)?DEP_FILES\s*=([^\n]*)';
-    if ($MakefileData =~ /\n$lookup\n/o) {
-        my $condition = $1;
-        my $depfiles = $2;
-        my $workfiles;
-
-        if ($dep_finals) {
-            # Add the conditions on every line, since
-            # there may be line continuations in the list.
-            $workfiles = "$dep_files $dep_finals $depfiles";
-            $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_TRUE\@\t/g;
-            $lines  = "$condition\@KDE_USE_FINAL_TRUE\@DEP_FILES = $workfiles\n";
-            $workfiles = "$dep_files $depfiles";
-            $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_FALSE\@\t/g;
-            $lines .= "$condition\@KDE_USE_FINAL_FALSE\@DEP_FILES = $workfiles\n";
-        } else {
-            $workfiles = "$dep_files $depfiles";
-            $workfiles =~ s/\034/\034$condition\t/g;
-            $lines = $condition . "DEP_FILES = $workfiles\n";
-        }
-        substituteLine($lookup, $lines);
-    }
-
-    my $cvs_lines = "cvs-clean:\n";
-    $cvs_lines .= "\t\$(MAKE) admindir=\$(top_srcdir)/admin -f \$(top_srcdir)/admin/Makefile.common cvs-clean\n";
-    appendLines($cvs_lines);
-
-    $cvs_lines  = "kde-rpo-clean:\n";
-    $cvs_lines .= "\t-rm -f *.rpo\n";
-    appendLines($cvs_lines);
-    $target_adds{"clean"} .= "kde-rpo-clean ";
-
-    my %target_dels = ("install-data-am" => "");
-
-    # some strange people like to do a install-exec, and expect that also
-    # all modules are installed.  automake doesn't know this, so we need to move
-    # this here from install-data to install-exec.
-    if ($MakefileData =~ m/\nkde_module_LTLIBRARIES\s*=/) {
-#      $target_adds{"install-exec-am"} .= "install-kde_moduleLTLIBRARIES ";
-#      don't use $target_adds here because we need to append the dependency, not
-#      prepend it. Fixes #44342 , when a module depends on a lib in the same dir
-#      and libtool needs it during relinking upon install (Simon)
-      my $lookup = "install-exec-am:([^\n]*)";
-      if($MakefileData =~ /\n$lookup\n/) {
-        substituteLine("$lookup", "install-exec-am: $1 install-kde_moduleLTLIBRARIES");
-      }
-      $target_dels{"install-data-am"} .= "install-kde_moduleLTLIBRARIES ";
-      $target_adds{"install-data-am"} .= " ";
-    }
-
-    my $lines = "";
-
-    foreach $add (keys %target_adds) {
-	my $lookup = quotemeta($add) . ':([^\n]*)';
-        if ($MakefileData =~ /\n$lookup\n/) {
-	  my $newlines = $1;
-	  my $oldlines = $lookup;
-	  if (defined $target_dels{$add}) {
-	    foreach $del (split(' ', $target_dels{$add})) {
-	      $newlines =~ s/\s*$del\s*/ /g;
-	    }
-	  }
-	  substituteLine($oldlines, "$add: " . $target_adds{$add} . $newlines);
-        } else {
-	  $lines .= "$add: " . $target_adds{$add} . "\n";
-        }
-    }
-    if ($lines) {
-        appendLines($lines);
-    }
-
-    my $found = 1;
-
-    while ($found) {
-        if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) {
-            my $stuff_before = $1;
-            my $stuff_after = $2;
-            my $lookup = quotemeta("$1\$(CXXFLAGS)$2");
-            my $replacement = "$1\$(KCXXFLAGS)$2";
-            $MakefileData =~ s/$lookup/$replacement/;
-            $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/;
-            $replacement = "$stuff_before\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$stuff_after";
-            substituteLine($lookup, $replacement);
-        } else {
-            $found = 0;
-        }
-    }
-
-    if($foreign_libtool == 0) {
-        $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))';
-
-        if ($MakefileData =~ m/$lookup/ ) {
-            $MakefileData =~ s/$lookup/$1 --tag=CXX $2/;
-        }
-
-        $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile)\s+(\$\(CXX\)\s+)';
-        if ($MakefileData =~ m/$lookup/ ) {
-            $MakefileData =~ s/$lookup/$1 --tag=CXX $2/;
-        }
-    }
-
-    $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g;
-
-    $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)';
-    if ($MakefileData =~ m/\n$lookup\n/) {
-        substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2");
-    }
-
-    # Always update the Makefile.in
-    updateMakefile ();
-    return;
-}
-
-#-----------------------------------------------------------------------------
-
-# Beware: This procedure is not complete.  E.g. it also parses lines
-# containing a '=' in rules (for instance setting shell vars).  For our
-# usage this us enough, though.
-sub read_variables ()
-{
-    while ($MakefileData =~ /\n\s*(\S+)\s*=([^\n]*)/g) {
-        $varcontent{$1} = $2;
-    }
-}
-
-# Check to see whether we should process this make file.
-# This is where we look for tags that we need to process.
-# A small amount of initialising on the tags is also done here.
-# And of course we open and/or create the needed make files.
-sub initialise ()
-{
-    if (! -r "Makefile.am") {
-	print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose);
-	return 0;
-    }
-
-    # Checking for files to process...
-    open (FILEIN, $makefile)
-      || die "Could not open $makefileDir/$makefile: $!\n";
-    # Read the file
-    # stat(FILEIN)[7] might look more elegant, but is slower as it 
-    # requires stat'ing the file
-    seek(FILEIN, 0, 2);
-    my $fsize = tell(FILEIN);
-    seek(FILEIN, 0, 0);
-    read FILEIN, $MakefileData, $fsize;
-    close FILEIN;
-    print "DOS CRLF within $makefileDir/$makefile!\n" if($MakefileData =~ y/\r//d);
-
-    # Remove the line continuations, but keep them marked
-    # Note: we lose the trailing spaces but that's ok.
-    # Don't mangle line-leading spaces (usually tabs)
-    # since they're important.
-    $MakefileData =~ s/\\\s*\n/\034/g;
-
-    # If we've processed the file before...
-    restoreMakefile ()      if ($MakefileData =~ /$progId/);
-
-    foreach $dir (@foreignfiles) {
-      if (substr($makefileDir,0,length($dir)) eq $dir) {
-	return 0;
-      }
-    }
-
-    %kdeopts = ();
-    $kdeopts{"foreign"} = 0;
-    $kdeopts{"qtonly"} = 0;
-    $kdeopts{"noautodist"} = 0;
-    $kdeopts{"foreign-libtool"} = $foreign_libtool;
-    $kdeopts{"nofinal"} = !$use_final; # default
-
-    read_variables();
-
-    if ($MakefileData =~ /\nKDE_OPTIONS\s*=\s*([^\n]*)\n/) {
-	my $kde_options_str = $1;
-        local @kde_options = split(/[\034\s]+/, $kde_options_str);
-        if (grep(/^foreign$/, @kde_options)) {
-            push(@foreignfiles, $makefileDir . "/");
-            return 0; # don't touch me
-        }
-        for $opt (@kde_options) {
-            if (!defined $kdeopts{$opt}) {
-                print STDERR "Warning: unknown option $opt in $printname\n";
-            } else {
-                $kdeopts{$opt} = 1;
-            }
-        }
-    }
-
-    # Look for the tags that mean we should process this file.
-    $metasourceTags = 0;
-    $metasourceTags++    while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g);
-
-    my $pofileTag = 0;
-    $pofileTag++    while ($MakefileData =~ /\nPOFILES\s*=/g);
-    if ($pofileTag > 1)
-      {
-          print STDERR "Error: Only one POFILES tag allowed\n";
-          $errorflag = 1;
-      }
-
-    while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) {
-	my $suffixes_str = $1;
-	my @list=split(' ', $suffixes_str);
-	foreach $ext (@list) {
-	    if ($ext =~ /^\.$cppExt$/) {
-		$cxxsuffix = $ext;
-		$cxxsuffix =~ s/\.//g;
-		print STDOUT "will use suffix $cxxsuffix\n" if ($verbose);
-		last;
-	    }
-	}
-    }
-
-    while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[\034\s]*([^\n]*)\n/g) {
-
-        my $program = $1;
-        my $objs = $2; # safe them
-
-        my $ocv = 0;
-
-        my @objlist = split(/[\034\s]+/, $objs);
-        foreach $obj (@objlist) {
-            if ($obj =~ /(\S*)\$\((\S+)\)/ ) {
-		my $pre = $1;
-                my $variable = $2;
-		if ($pre eq '' && exists($varcontent{$variable})) {
-		    my @addlist = split(/[\034\s]+/, $varcontent{$variable});
-		    push(@objlist, @addlist);
-                } elsif ($variable !~ 'OBJEXT') {
-                    $ocv = 1;
-		}
-            }
-        }
-
-        next if ($ocv);
-
-        $program =~ s/^am_// if ($program =~ /^am_/);
-
-        my $sourceprogram = $program;
-        $sourceprogram =~ s/\@am_/\@/ if($sourceprogram =~ /^.*\@am_.+/);
-
-        print STDOUT "found program $program\n" if ($verbose);
-        push(@programs, $program);
-
-        $realObjs{$program} = $objs;
-
-        if ($MakefileData =~ /\n$sourceprogram\_SOURCES\s*=\s*(.*)\n/) {
-            $sources{$program} = $1;
-        } 
-        else {
-            $sources{$program} = "";
-            print STDERR "found program with no _SOURCES: $program\n";
-        }
-        
-        my $realprogram = $program;
-        $realprogram =~ s/_/./g; # unmask to regexp
-        if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) {
-            $realname{$program} = $1;
-        } else {
-            # not standard Makefile - nothing to worry about
-            $realname{$program} = "";
-        }
-    }
-
-    my $lookup = 'DEPDIR\s*=.*';
-    if ($MakefileData !~ /\n($lookup)\n/o) {
-        $lookup = 'bindir\s*=.*';
-        if ($MakefileData =~ /\n($lookup)\n/) {
-            substituteLine ($lookup, "DEPDIR = .deps\n$1");
-        }
-    } 
-
-    my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES');
-    foreach $mark (@marks) {
-        while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) {
-	    my $clean_str = $2; 
-            foreach $file (split('[\034\s]+', $clean_str)) {
-                $file =~ s/\.\///;
-                push(@cleanfiles, $file);
-            }
-        }
-    }
-
-    my $localTag = 0;
-    $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/);
-    
-    return (!$errorflag);
-}
-
-#-----------------------------------------------------------------------------
-
-# Gets the list of user defined directories - relative to $srcdir - where
-# header files could be located.
-sub tag_META_INCLUDES ()
-{
-    my $lookup = '[^=\n]*META_INCLUDES\s*=\s*(.*)';
-    return 1    if ($MakefileData !~ /($lookup)\n/o);
-    print STDOUT "META_INCLUDE processing <$1>\n"       if ($verbose);
-
-    my $headerStr = $2;
-    removeLine ($lookup, $1);
-
-    my @headerlist = split(/[\034\s]+/, $headerStr);
-
-    foreach $dir (@headerlist)
-    {
-        $dir =~ s#\$\(srcdir\)#.#;
-        if (! -d $dir)
-        {
-            print STDERR "Warning: $dir can't be found. ",
-                            "Must be a relative path to \$(srcdir)\n";
-        }
-        else
-        {
-            push (@headerdirs, $dir);
-        }
-    }
-
-    return 0;
-}
-
-#-----------------------------------------------------------------------------
-
-sub tag_FINAL()
-{
-    my @final_names = ();
-    
-    foreach $program (@programs) {
-        
-        if ($sources{$program} =~ /\(/) {
-            print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose);
-            next;
-        }
-
-        my $mocs = "";       # Moc files (in this program)
-	my $moc_cpp_added = 0;  # If we added some .moc.cpp files, due to
-				# no other .cpp file including the .moc one.
-        
-        my @progsources = split(/[\034\s]+/, $sources{$program});
-        my %shash = ();
-        @shash{@progsources} = 1;  # we are only interested in the existence
-        my %sourcelist = ();
-        
-        foreach $source (@progsources) {
-            my $suffix = $source;
-            $suffix =~ s/^.*\.([^\.]+)$/$1/;
-            
-            $sourcelist{$suffix} .= "$source ";
-        }
-        foreach my $mocFile (keys (%globalmocs))
-        {
-            my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3);
-            if (defined ($cppFile)) {
-                $mocs .= " $mocFile.moc" if exists $shash{$cppFile};
-            } else {
-		$sourcelist{$cxxsuffix} .= "$mocFile.moc.$cxxsuffix ";
-		$moc_cpp_added = 1;
-	    }
-        }
-        foreach $suffix (keys %sourcelist) {
-            
-            # See if this file contains c++ code. (i.e., just check the file's suffix against c++ extensions)
-            my $suffix_is_cxx = 0;
-            if($suffix =~ /($cppExt)$/) {
-              $cxxsuffix = $1;
-              $suffix_is_cxx = 1;
-            }
-            
-            my $mocfiles_in = ($suffix eq $cxxsuffix) && $moc_cpp_added;
-            
-            my @sourcelist = split(/[\034\s]+/, $sourcelist{$suffix});
-            
-            if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) {
-                
-                # we support IDL on our own
-                if ($suffix eq "skel" || $suffix =~ /^stub/
-		    || $suffix =~ /^signals/ # obsolete, remove in KDE-4
-                    || $suffix eq "h" || $suffix eq "ui" ) {
-                    next;
-                }
-                
-                foreach $file (@sourcelist) {
-                    $file =~ s/\Q$suffix\E$//;
-                    
-                    $finalObjs{$program} .= $file;
-                    if ($program =~ /_la$/) {
-                        $finalObjs{$program} .= "lo ";
-                    } else {
-                        $finalObjs{$program} .= "o ";
-                    }
-                }
-                next; # suffix
-            }
-            
-            my $source_deps = "";
-            foreach $source (@sourcelist) {
-                if (-f $source) {
-                    $source_deps .= " \$(srcdir)/$source";
-                } else {
-                    $source_deps .= " $source";
-                }
-            }
-
-            $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in" . $source_deps . " " . join(' ', $mocs)  . "\n";
-            $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n";
-            $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n";
-            $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n";
-            $handling .= "\tfor file in " . $sourcelist{$suffix} . "; do \\\n";
-            $handling .= "\t  echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n";
-            $handling .= "\t  test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n";
-            $handling .= "\tdone; \\\n";
-            $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files > $program.all_$suffix.$suffix; \\\n";
-            $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n";
-
-            appendLines($handling);
-
-            push(@final_names, "$program.all_$suffix.$suffix");
-            my $finalObj = "$program.all_$suffix.";
-            if ($program =~ /_la$/) {
-                $finalObj .= "lo";
-            } else {
-                $finalObj .= "o";
-            }
-	    $finalObjs{$program} .= $finalObj . " ";
-        }
-    }
-    
-    if (!$kdeopts{"nofinal"} && @final_names >= 1) {
-        # add clean-final target
-        my $lines = "$cleantarget-final:\n";
-        $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names);
-        appendLines($lines);
-        $target_adds{"$cleantarget-am"} .= "$cleantarget-final ";
-        
-        foreach $finalfile (@final_names) {
-            $finalfile =~ s/\.[^.]*$/.P/;
-            $dep_finals .= " \$(DEPDIR)/$finalfile";
-        }
-    }
-}
-
-sub tag_TDEINIT()
-{
-    my $lookup = 'tdeinit_LTLIBRARIES\s*=\s*(.*)';
-    if ($MakefileData =~ m/\n$lookup\n/) {
-	my @tdeinits = split(/[\034\s]+/, $1);
-	my $lines = "";
-	foreach $tdeinit (@tdeinits) {
-	    if ($tdeinit =~ m/\.la$/) {
-		$tdeinit =~ s/\.la$//;
-		$lines .= "\t\@-rm -f \$(DESTDIR)\$(bindir)/$tdeinit\n";
-		$lines .= "\t\@if test \"\$(BROCKENBORING)\" = \"\$(bindir)/brockenboring\"; then \\\n";
-		$lines .= "\techo \$(LN_S) brockenboring \$(DESTDIR)\$(bindir)/$tdeinit ; \\\n";
-		$lines .= "\t\$(LN_S) brockenboring \$(DESTDIR)\$(bindir)/$tdeinit ; else \\\n";
-		$lines .= "\techo \$(LN_S) \$(BROCKENBORING) \$(DESTDIR)\$(bindir)/$tdeinit ;\\\n";
-		$lines .= "\t\$(LN_S) \$(BROCKENBORING) \$(DESTDIR)\$(bindir)/$tdeinit ; fi\n";
-	    }
-	}
-	$target_adds{"install-exec-am"} .= "install-tdeinit-links ";
-	$lines = "install-tdeinit-links:\n" .
-	  "\t\$(mkinstalldirs) \$(DESTDIR)\$(bindir)\n" . $lines;
-	appendLines($lines);
-    }
-}
-
-#-----------------------------------------------------------------------------
-
-sub tag_COMPILE_FIRST()
-{
-  foreach $program (@programs) {
-    my $lookup = "$program" . '_COMPILE_FIRST\s*=\s*(.*)';
-    if ($MakefileData =~ m/\n$lookup\n/) {
-      my $compilefirst_str = $1;
-      my @compilefirst = split(/[\034\s]+/, $compilefirst_str);
-      my @progsources = split(/[\034\s]+/, $sources{$program});
-      my %donesources = ();
-      $handling = "";
-      foreach $source (@progsources) {
-        my @deps  = ();
-        my $sdeps = "";
-        if (-f $source) {
-          $sdeps = "\$(srcdir)/$source";
-        } else {
-          $sdeps = "$source";
-        }
-        foreach $depend (@compilefirst) {
-          next if ($source eq $depend);
-          # avoid cyclic dependencies
-          next if defined($donesources{$depend});
-          push @deps, $depend;
-        }
-        $handling .= "$sdeps: " . join(' ', @deps) . "\n" if (@deps);
-        $donesources{$source} = 1;
-      }
-      appendLines($handling) if (length($handling));
-    }
-  }
-}
-
-#-----------------------------------------------------------------------------
-
-
-# Organises the list of headers that we'll use to produce moc files
-# from.
-sub tag_METASOURCES ()
-{
-    local @newObs           = ();  # here we add to create object files
-    local @deped            = ();  # here we add to create moc files
-    local $mocExt           = ".moc";
-    local %mocFiles         = ();
-
-    my $line = "";
-    my $postEqual = "";
-
-    my $lookup;
-    my $found = "";
-#print "$program: tag_METASOURCES\n";
-    if ($metasourceTags > 1) {
-	$lookup = $program . '_METASOURCES\s*=\s*(.*)';
-	return 1    if ($MakefileData !~ /\n($lookup)\n/);
-	$found = $1;
-    } else {
-	$lookup = $program . '_METASOURCES\s*=\s*(.*)';
-	if ($MakefileData !~ /\n($lookup)\n/) {
-	    $lookup = 'METASOURCES\s*=\s*(.*)';
-	    return 1    if ($MakefileData !~ /\n($lookup)\n/o);
-	    $found = $1;
-	    $metasourceTags = 0; # we can use the general target only once
-	} else {
-            $found = $1;
-        }
-    }
-    print STDOUT "METASOURCE processing <$found>)\n"      if ($verbose);
-    
-    $postEqual = $found;
-    $postEqual =~ s/[^=]*=//;
-    
-    removeLine ($lookup, $found);
-    
-    # Always find the header files that could be used to "moc"
-    return 1    if (findMocCandidates ());
-    
-    if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/)
-    {
-	print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+);
-	$mocExt = ".moc.$cxxsuffix";
-	$haveAutomocTag = 1;
-    }
-    else
-    {
-        # Not automoc so read the list of files supplied which
-        # should be .moc files.
-
-        $postEqual =~ tr/\034/ /;
-
-        # prune out extra headers - This also checks to make sure that
-        # the list is valid.
-        pruneMocCandidates ($postEqual);
-    }
-
-    checkMocCandidates ();
-    
-    if (@newObs) {
-        my $ext =  ($program =~ /_la$/) ? ".moc.lo " : ".moc.o ";
-        $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext;
-        $depedmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix";
-        foreach $file (@newObs) {
-            $dep_files .= " \$(DEPDIR)/$file.moc.P" if($dep_files !~/$file.moc.P/);
-        }
-    }
-    if (@deped) {
-        $depedmocs{$program} .= " ";
-        $depedmocs{$program} .= join('.moc ', @deped) . ".moc";
-        $depedmocs{$program} .= " ";
-    }
-    addMocRules ();
-    @globalmocs{keys %mocFiles}=values %mocFiles;
-}
-
-#-----------------------------------------------------------------------------
-
-# Returns 0 if the line was processed - 1 otherwise.
-# Errors are logged in the global $errorflags
-sub tag_AUTOMAKE ()
-{
-    my $lookup = '.*cd \$\(top_srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\)(.*)';
-    return 1    if ($MakefileData !~ /\n($lookup)\n/);
-    print STDOUT "AUTOMAKE processing <$1>\n"        if ($verbose);
-
-    my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname";
-    substituteLine ($lookup, $newLine);
-    $automkCall = $1;
-
-    $lookup = '.*cd \$\(srcdir\)\s+&&[\034\s]+\$\(AUTOCONF\)(.*)';
-    if ($MakefileData =~ /\n($lookup)\n/) {
-      $newLine = "\tcd \$(srcdir) && rm -f configure && \$(MAKE) -f admin/Makefile.common configure";
-      substituteLine ($lookup, $newLine);
-    }
-
-    return 0;
-}
-
-#-----------------------------------------------------------------------------
-
-sub handle_TOPLEVEL()
-{
-    my $pofiles = "";
-    my @restfiles = ();
-    opendir (THISDIR, ".");
-    foreach $entry (readdir(THISDIR)) {
-        next if (-d $entry);
-        
-        next if ($entry eq "CVS" || $entry =~ /^\./  || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/);
-                 
-        if ($entry =~ /\.po$/) {
-             next;
-        }
-        push(@restfiles, $entry);
-    }
-    closedir (THISDIR);
-            
-    if (@restfiles) {
-        $target_adds{"install-data-am"} .= "install-nls-files ";
-        $lines = "install-nls-files:\n";
-        $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$kdelang\n";
-        for $file (@restfiles) {
-            $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n";
-        }
-	$target_adds{"uninstall"} .= "uninstall-nls-files ";
-        $lines .= "uninstall-nls-files:\n";
-        for $file (@restfiles) {
-            $lines .= "\t-rm -f \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n";
-        }
-        appendLines($lines);
-    }
-    
-    return 0;
-}
-
-#-----------------------------------------------------------------------------
-
-sub tag_SUBDIRS ()
-{
-  if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) {
-    return 1;
-  }
-
-  my $subdirs = ".";
-
-  opendir (THISDIR, ".");
-  foreach $entry (readdir(THISDIR)) {
-    next if ($entry eq "CVS" || $entry =~ /^\./);
-    if (-d $entry && -f $entry . "/Makefile.am") {
-      $subdirs .= " $entry";
-      next;
-    }
-  }
-  closedir (THISDIR);
-
-  my $lines = "SUBDIRS =$subdirs\n";
-  substituteLine('SUBDIRS\s*=.*', $lines);
-  return 0;
-}
-
-sub tag_IDLFILES ()
-{
-    my @psources = split(/[\034\s]+/, $sources{$program});
-    my $dep_lines = "";
-    my @cppFiles = ();
-    
-    foreach $source (@psources) {
-        
-        my $skel = ($source =~ m/\.skel$/);
-        my $stub = ($source =~ m/\.stub$/);
-        my $signals = ($source =~ m/\.signals$/); # obsolete, remove in KDE-4
-        
-        if ($stub || $skel || $signals) {
-            
-            my $qs = quotemeta($source);
-            $sources{$program} =~ s/$qs//;
-            $sources_changed{$program} = 1;
-            
-            print STDOUT "adding IDL file $source\n" if ($verbose);
-            
-            $source =~ s/\.(stub|skel|signals)$//;
-            
-            my $sourcename;
-            
-            if ($skel) {
-                $sourcename = "$source\_skel";
-            } elsif ($stub) {
-                $sourcename = "$source\_stub";
-            } else {
-                $sourcename = "$source\_signals";
-            }
-            
-            my $sourcedir = '';
-            if (-f "$makefileDir/$source.h") {
-                $sourcedir = '$(srcdir)/';
-            } else {
-                if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) {
-                    $sourcedir = $1;
-                    $sourcedir .= "/" if ($sourcedir !~ /\/$/);
-                }
-            }
-            
-            if ($allidls !~ /$source\_kidl/) {
-                
-                $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOP_DEPENDENCIES)\n";
-                $dep_lines .= "\t\$(DCOPIDL) $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; false )\n";
-                
-                $allidls .= $source . "_kidl ";
-            }
-            
-            if ($allidls !~ /$sourcename/) {
-                
-                $dep_lines_tmp = "";
-
-                if ($skel) {
-                    $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n";
-                    $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-stub $source.kidl\n";
-                } elsif ($stub) {
-                    $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-skel $source.kidl\n";
-                } else { # signals - obsolete, remove in KDE 4
-                    $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub --no-skel $source.kidl\n";
-                }
-
-                if ($stub || $signals) {
-                    $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h ";
-                    $dep_lines .= "$sourcename.h: $source.kidl\n";
-                    $dep_lines .= $dep_lines_tmp;
-                }
-                
-                $allidls .= $sourcename . " ";
-            }
-            
-            $idlfiles{$program} .= $sourcename . " ";
-            
-            if ($program =~ /_la$/) {
-                $realObjs{$program} .= " $sourcename.lo";
-            } else {
-                $realObjs{$program} .= " $sourcename.\$(OBJEXT)";
-            }
-            $sources{$program} .= " $sourcename.$cxxsuffix";
-            $sources_changed{$program} = 1;
-            $important{$program} .= "$sourcename.h " if (!$skel);
-            $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl ";
-            push(@cleanfiles, "$sourcename.$cxxsuffix");
-            push(@cleanfiles, "$sourcename.h");
-            push(@cleanfiles, "$sourcename.kidl");
-            $dep_files .= " \$(DEPDIR)/$sourcename.P" if ($dep_files !~/$sourcename.P/);
-        }
-    }
-    if ($dep_lines) {
-        appendLines($dep_lines);
-    }
-    
-    if (0) {
-        my $lookup = "($program)";
-        $lookup .= '(|\$\(EXEEXT\))';
-        $lookup =~ s/\_/./g;
-        $lookup .= ":(.*..$program\_OBJECTS..*)";
-        #    $lookup = quotemeta($lookup);
-        if ($MakefileData =~ /\n$lookup\n/) {
-            
-            my $line = "$1$2: ";
-            foreach $file (split(' ', $idlfiles{$program})) {
-                $line .= "$file.$cxxsuffix ";
-            }
-            $line .= $3;
-            substituteLine($lookup, $line);
-        } else {
-            print STDERR "no built dependency found $lookup\n";
-        }
-    }
-}
-
-sub tag_UIFILES ()
-{
-    my @psources = split(/[\034\s]+/, $sources{$program});
-    my $dep_lines = "";
-    my @depFiles = ();
-    
-    foreach $source (@psources) {
-
-        if ($source =~ m/\.ui$/) {
-
-            print STDERR "adding UI file $source\n" if ($verbose);
-
-            my $qs = quotemeta($source);
-            $sources{$program} =~ s/$qs//;
-            $sources_changed{$program} = 1;
-      
-            $source =~ s/\.ui$//;
-
-            my $sourcedir = '';
-            if (-f "$makefileDir/$source.ui") {
-                $sourcedir = '$(srcdir)/';
-            }
-
-            if (!$uiFiles{$source}) {
-
-                $dep_lines .= "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n";
-                $dep_lines .= "\trm -f $source.$cxxsuffix\n";
-                if (!$kdeopts{"qtonly"}) {
-                    $dep_lines .= "\techo '#include <tdelocale.h>' > $source.$cxxsuffix\n";
-                    my ($mangled_source) = $source;
-                    $mangled_source =~ s/[^A-Za-z0-9]/_/g;  # get rid of garbage
-                    $dep_lines .= "\t\$(UIC) -tr \${UIC_TR} -i $source.h $sourcedir$source.ui > $source.$cxxsuffix.temp ; ret=\$\$?; \\\n";
-                    $dep_lines .= "\tsed -e \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" $source.$cxxsuffix.temp | sed -e \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | sed -e \"s,image\\([0-9][0-9]*\\)_data,img\\1_" . $mangled_source . ",g\" >> $source.$cxxsuffix ;\\\n";
-		    $dep_lines .= "\trm -f $source.$cxxsuffix.temp ;\\\n";
-                } else {
-                    $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix; ret=\$\$?; \\\n";
-                }
-		$dep_lines .= "\tif test \"\$\$ret\" = 0; then echo '#include \"$source.moc\"' >> $source.$cxxsuffix; else rm -f $source.$cxxsuffix ; exit \$\$ret ; fi\n\n";
-                $dep_lines .= "$source.h: $sourcedir$source.ui\n";
-                $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n\n";
-                $dep_lines .= "$source.moc: $source.h\n";
-                $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n";
-
-		$uiFiles{$source} = 1;
-                $depedmocs{$program} .= " $source.moc";
-                $globalmocs{$source} = "\035$source.h\035$source.cpp";
-            }
-            
-            if ($program =~ /_la$/) {
-                $realObjs{$program} .= " $source.lo";
-            } else {
-                $realObjs{$program} .= " $source.\$(OBJEXT)";
-            }
-            $sources{$program} .= " $source.$cxxsuffix";
-            $sources_changed{$program} = 1;
-            $important{$program} .= "$source.h ";
-            $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc ";
-            push(@cleanfiles, "$source.$cxxsuffix");
-            push(@cleanfiles, "source.h");
-            push(@cleanfiles, "$source.moc");
-            $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ );
-        }
-    }
-    if ($dep_lines) {
-        appendLines($dep_lines);
-    }
-}
-
-sub tag_ICON()
-{
-    my $lookup = '([^\s]*)_ICON\s*=\s*([^\n]*)';
-    my $install = "";
-    my $uninstall = "";
-
-    while ($MakefileData =~ /\n$lookup/og) {
-        my $destdir;
-        if ($1 eq "KDE") {
-            $destdir = "kde_icondir";
-        } else {
-            $destdir = $1 . "dir";
-        }
-        my $iconauto = ($2 =~ /AUTO\s*$/);
-        my @appnames = ();
-        if ( ! $iconauto ) {
-	    my $appicon_str = $2;
-            my @_appnames = split(" ", $appicon_str);
-            print STDOUT "KDE_ICON processing <@_appnames>\n"   if ($verbose);
-            foreach $appname (@_appnames) {
-                push(@appnames, quotemeta($appname));
-            }
-        } else {
-            print STDOUT "KDE_ICON processing <AUTO>\n"   if ($verbose);
-        }
-
-        my @files = ();
-        opendir (THISDIR, ".");
-        foreach $entry (readdir(THISDIR)) {
-            next if ($entry eq "CVS" || $entry =~ /^\./  || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/);
-            next if (! -f $entry);
-            if ( $iconauto )
-              {
-                  push(@files, $entry)
-                    if ($entry =~ /\.xpm/ || $entry =~ /\.png/ || $entry =~ /\.mng/ || $entry =~ /\.svg/);
-              } else {
-                  foreach $appname (@appnames) {
-                      push(@files, $entry)
-                        if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/ || $entry =~ /-$appname\.mng/ || $entry =~ /-$appname\.svg/);
-                  }
-              }
-        }
-        closedir (THISDIR);
-        
-        my %directories = ();
-        
-        foreach $file (@files) {
-            my $newfile = $file;
-            my $prefix = $file;
-            $prefix =~ s/\.(png|xpm|mng|svg|svgz)$//;
-            my $appname = $prefix;
-            $appname =~ s/^[^-]+-// if ($appname =~ /-/) ;
-            $appname =~ s/^[^-]+-// if ($appname =~ /-/) ;
-            $appname = quotemeta($appname);
-            $prefix =~ s/$appname$//;
-            $prefix =~ s/-$//;
-            
-            $prefix = 'lo16-app' if ($prefix eq 'mini');
-            $prefix = 'lo32-app' if ($prefix eq 'lo');
-            $prefix = 'hi48-app' if ($prefix eq 'large');
-            $prefix .= '-app' if ($prefix =~ m/^...$/);
-            
-            my $type = $prefix;
-            $type =~ s/^.*-([^-]+)$/$1/;
-            $prefix =~ s/^(.*)-[^-]+$/$1/;
-            
-            my %type_hash =
-              (
-               'action' => 'actions',
-               'app' => 'apps',
-               'device' => 'devices',
-               'filesys' => 'filesystems',
-               'mime' => 'mimetypes'
-              );
-
-            if (! defined $type_hash{$type} ) {
-                print STDERR "unknown icon type $type in $printname ($file)\n";
-                next;
-            }
-
-            my %dir_hash =
-              (
-               'los' => 'locolor/16x16',
-               'lom' => 'locolor/32x32',
-               'him' => 'hicolor/32x32',
-               'hil' => 'hicolor/48x48',
-               'lo16' => 'locolor/16x16',
-               'lo22' => 'locolor/22x22',
-               'lo32' => 'locolor/32x32',
-               'hi16' => 'hicolor/16x16',
-               'hi22' => 'hicolor/22x22',
-               'hi32' => 'hicolor/32x32',
-               'hi48' => 'hicolor/48x48',
-               'hi64' => 'hicolor/64x64',
-               'hi128' => 'hicolor/128x128',
-               'hisc' => 'hicolor/scalable',
- 	       'cr16' => 'crystalsvg/16x16',
-               'cr22' => 'crystalsvg/22x22',
-               'cr32' => 'crystalsvg/32x32',
-               'cr48' => 'crystalsvg/48x48',
-               'cr64' => 'crystalsvg/64x64',
-               'cr128' => 'crystalsvg/128x128',
-               'crsc' => 'crystalsvg/scalable'
-              );
-            
-            $newfile =~ s@.*-($appname\.(png|xpm|mng|svgz|svg?))@$1@;
-            
-            if (! defined $dir_hash{$prefix}) {
-                print STDERR "unknown icon prefix $prefix in $printname\n";
-                next;
-            }
-            
-            my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type};
-            if ($newfile =~ /-[^\.]/) {
-                my $tmp = $newfile;
-                $tmp =~ s/^([^-]+)-.*$/$1/;
-                $dir = $dir . "/" . $tmp;
-                $newfile =~ s/^[^-]+-//;
-            }
-            
-            if (!defined $directories{$dir}) {
-                $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n";
-                $directories{$dir} = 1;
-            }
-            
-            $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n";
-            $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n";
-            
-        }
-    }
-
-    if (length($install)) {
-        $target_adds{"install-data-am"} .= "install-kde-icons ";
-        $target_adds{"uninstall-am"} .= "uninstall-kde-icons ";
-        appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall);
-    }
-}
-
-sub handle_POFILES($$)
-{
-  my @pofiles = split(" ", $_[0]);
-  my $lang = $_[1];
-
-  # Build rules for creating the gmo files
-  my $tmp = "";
-  my $allgmofiles     = "";
-  my $pofileLine   = "POFILES =";
-  foreach $pofile (@pofiles)
-    {
-        $pofile =~ /(.*)\.[^\.]*$/;          # Find name minus extension
-        $tmp .= "$1.gmo: $pofile\n";
-        $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n";
-        $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n";
-        $allgmofiles .= " $1.gmo";
-        $pofileLine  .= " $1.po";
-    }
-  appendLines ($tmp);
-  my $lookup = 'POFILES\s*=([^\n]*)';
-  if ($MakefileData !~ /\n$lookup/o) {
-    appendLines("$pofileLine\nGMOFILES =$allgmofiles");
-  } else {
-    substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles");
-  }
-
-    if ($allgmofiles) {
-
-        # Add the "clean" rule so that the maintainer-clean does something
-        appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n");
-
-	$target_adds{"maintainer-clean"} .= "clean-nls ";
-
-	$lookup = 'DISTFILES\s*=\s*(.*)';
-	if ($MakefileData =~ /\n$lookup\n/o) {
-	  $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1";
-	  substituteLine ($lookup, $tmp);
-	}
-    }
-
-  $target_adds{"install-data-am"} .= "install-nls ";
-
-  $tmp = "install-nls:\n";
-  if ($lang) {
-    $tmp  .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n";
-  }
-  $tmp .= "\t\@for base in ";
-  foreach $pofile (@pofiles)
-    {
-      $pofile =~ /(.*)\.[^\.]*$/;          # Find name minus extension
-      $tmp .= "$1 ";
-    }
-
-  $tmp .= "; do \\\n";
-  if ($lang) {
-    $tmp .= "\t  echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n";
-    $tmp .= "\t  if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n";
-    $tmp .= "\t  elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n";
-    $tmp .= "\t  fi ;\\\n";
-  } else {
-    $tmp .= "\t  echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n";
-    $tmp .= "\t  \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n";
-    $tmp .= "\t  if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n";
-    $tmp .= "\t  elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n";
-    $tmp .= "\t  fi ;\\\n";
-  }
-  $tmp .= "\tdone\n\n";
-  appendLines ($tmp);
-
-  $target_adds{"uninstall"} .= "uninstall-nls ";
-
-  $tmp = "uninstall-nls:\n";
-  foreach $pofile (@pofiles)
-    {
-      $pofile =~ /(.*)\.[^\.]*$/;          # Find name minus extension
-      if ($lang) {
-	$tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n";
-      } else {
-	$tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n";
-      }
-    }
-  appendLines($tmp);
-
-  $target_adds{"all"} .= "all-nls ";
-
-  $tmp = "all-nls: \$(GMOFILES)\n";
-
-  appendLines($tmp);
-
-  $target_adds{"distdir"} .= "distdir-nls ";
-
-  $tmp = "distdir-nls:\$(GMOFILES)\n";
-  $tmp .= "\tfor file in \$(POFILES); do \\\n";
-  $tmp .= "\t  cp \$(srcdir)/\$\$file \$(distdir); \\\n";
-  $tmp .= "\tdone\n";
-  $tmp .= "\tfor file in \$(GMOFILES); do \\\n";
-  $tmp .= "\t  cp \$(srcdir)/\$\$file \$(distdir); \\\n";
-  $tmp .= "\tdone\n";
-
-  appendLines ($tmp);
-
-  if (!$lang) {
-    appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n");
-  }
- 
-}
-
-#-----------------------------------------------------------------------------
-
-# Returns 0 if the line was processed - 1 otherwise.
-# Errors are logged in the global $errorflags
-sub tag_POFILES ()
-{
-    my $lookup = 'POFILES\s*=([^\n]*)';
-    return 1    if ($MakefileData !~ /\n$lookup/o);
-    print STDOUT "POFILES processing <$1>\n"   if ($verbose);
-
-    my $tmp = $1;
-
-    # make sure these are all gone.
-    if ($MakefileData =~ /\n\.po\.gmo:\n/)
-    {
-        print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n";
-        return 1;
-    }
-
-    # Either find the pofiles in the directory (AUTO) or use
-    # only the specified po files.
-    my $pofiles = "";
-    if ($tmp =~ /^\s*AUTO\s*$/)
-    {
-        opendir (THISDIR, ".");
-	$pofiles =  join(" ", grep(/\.po$/, readdir(THISDIR)));
-        closedir (THISDIR);
-        print STDOUT "pofiles found = $pofiles\n"   if ($verbose);
-	if (-f "charset" && -f "tdelibs.po") {
-	    handle_TOPLEVEL();
-	}
-    }
-    else
-    {
-        $tmp =~ s/\034/ /g;
-        $pofiles = $tmp;
-    }
-    return 1    if (!$pofiles);        # Nothing to do
-
-    handle_POFILES($pofiles, $kdelang);
-
-    return 0;
-}
-
-sub helper_LOCALINSTALL($)
-{
-  my $lookup = "\035" . $_[0] . " *:[^\035]*\035\t";
-  my $copy = $MakefileData;
-  $copy =~ s/\n/\035/g;
-  if ($copy =~ /($lookup.*)$/) {
-
-    $install = $1;
-    $install =~ s/\035$_[0] *:[^\035]*\035//;
-    my $emptyline = 0;
-    while (! $emptyline ) {
-      if ($install =~ /([^\035]*)\035(.*)/) {
-	local $line = $1;
-	$install = $2;
-	if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) {
-	  $emptyline = 1;
-	} else {
-	  replaceDestDir($line);
-	}
-      } else {
-	$emptyline = 1;
-      }
-    }
-  }
-
-}
-
-sub tag_LOCALINSTALL ()
-{
-  helper_LOCALINSTALL('install-exec-local');
-  helper_LOCALINSTALL('install-data-local');
-  helper_LOCALINSTALL('uninstall-local');
-
-  return 0;
-}
-
-sub replaceDestDir($) {
-  local $line = $_[0];
-
-  if (   $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/
-      || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/
-      || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/)
-  {
-    $line =~ s/^(.*) ([^\s]+)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/);
-  }
-
-  if ($line ne $_[0]) {
-    $_[0] = quotemeta $_[0];
-    substituteLine($_[0], $line);
-  }
-}
-
-#---------------------------------------------------------------------------
-# libtool is very hard to persuade it could use -Wl,--no-undefined for making
-# -no-undefined actually work
-# append $(KDE_NO_UNFINED) after every -no-undefined in LDFLAGS
-# this may go away if libtool ever does this on its own
-sub tag_NO_UNDEFINED () {
-    return if ($program !~ /_la$/);
-
-    my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n";
-    $MakefileData =~ m/$lookup/;
-    return if ($1 !~ /CXXLINK/);
-
-    if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ ) {
-        return;
-    }
-
-    $lookup = $program . '\_LDFLAGS(\s*)=(.*)-no-undefined(.*)';
-    if ($MakefileData =~ /\n$lookup\n/) {
-	my $replace = $program . "\_LDFLAGS$1=$2-no-undefined \$(KDE_NO_UNDEFINED)$3";
-        substituteLine($lookup, $replace);
-    }
-}
-
-sub tag_CLOSURE () {
-    return if ($program !~ /_la$/);
-
-    my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n";
-    $MakefileData =~ m/$lookup/;
-    return if ($1 !~ /CXXLINK/);
-
-    if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ &&
-        $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) {
-        print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun);
-        return;
-    }
-
-    my $closure = $realname{$program} . ".closure";
-    my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n";
-    $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n";
-    $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n";
-    $lines .= "\t\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n";
-    $lines .= "\t\@rm -f $program\_closure.* $closure\n";
-    $lines .= "\t\@echo \"timestamp\" > $closure\n";
-    $lines .= "\n";
-    appendLines($lines);
-    $lookup = $realname{$program} . ": (.*)";
-    if ($MakefileData =~ /\n$lookup\n/) {
-        $lines  = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1";
-        $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1";
-        substituteLine($lookup, $lines);
-    }
-    $closure_output .= " $closure";
-}
-
-sub tag_NMCHECK () {
-    return if ($program !~ /_la$/);
-    my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n";
-    $MakefileData =~ m/$lookup/;
-    my $linkcmd = $1;
-    return if ($linkcmd !~ /CXXLINK/ && $linkcmd !~ /LINK/);
-
-    $lookup = $program . '_NMCHECK\s*=([^\n]*)';
-    if( $MakefileData !~ m/\n$lookup\n/ ) {
-	return;
-    }
-    my $allowed = $1;
-    $allowed =~ s/^ *//;
-    $lookup = $program . '_NMCHECKWEAK\s*=([^\n]*)';
-    my $weak = "";
-    my $is_weak = 0;
-    if( $MakefileData =~ m/\n$lookup\n/ ) {
-	$weak = $1;
-	$is_weak = 1;
-    }
-    $weak =~ s/^ *//;
-
-    if( $is_weak )
-    {
-	$weak = '--allowweak=\'' . $weak . '\' ';
-    }
-    my $nmline = "\@KDE_USE_NMCHECK_TRUE@\t\@\$(MAKE) \$(AM_MAKEFLAGS) nmcheck_$realname{$program} || ( rm -f $realname{$program}; exit 1 )";
-    $lookup = '(\t\$\(CXXLINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)';
-    if( $MakefileData =~ /\n$lookup\n/ ) {
-	my $oldstuff = $1;
-	substituteLine( $lookup, $oldstuff . "\n" . $nmline );
-    }
-    $lookup = '(\t\$\(LINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)';
-    if( $MakefileData =~ /\n$lookup\n/ ) {
-	my $oldstuff = $1;
-	substituteLine( $lookup, $oldstuff . "\n" . $nmline );
-    }
-    $nmline = "\@\$(top_srcdir)/admin/nmcheck $realname{$program} \'$allowed\' $weak";
-    appendLines( "\nnmcheck_$realname{$program}: $realname{$program} \n\t$nmline\n" );
-    $target_adds{ "nmcheck" } .= "nmcheck_$realname{$program} ";
-}
-
-sub tag_NMCHECK_GLOBAL() {
-    $target_adds{ "nmcheck" } .= ""; # always create nmcheck target
-    $target_adds{ "nmcheck-am" } .= "nmcheck";
-    my $lookup = 'RECURSIVE_TARGETS\s*=\s*(.*)';
-    if ($MakefileData =~ /\n$lookup/) {
-      substituteLine($lookup, "RECURSIVE_TARGETS = $1 nmcheck-recursive");
-    }
-}
-
-sub tag_DIST () {
-    my %foundfiles = ();
-    opendir (THISDIR, ".");
-    foreach $entry (readdir(THISDIR)) {
-        next if ($entry eq "CVS" || $entry =~ /^\./  || $entry eq "Makefile" || $entry =~ /~$/ || $entry =~ /^\#.*\#$/);
-        next if (! -f $entry);
-        next if ($entry =~ /\.moc/ || $entry =~ /\.moc.$cppExt$/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/);
-        next if ($entry =~ /\.all_$cppExt\.$cppExt$/);
-        $foundfiles{$entry} = 1;
-    }
-    closedir (THISDIR);
-
-    # doing this for MAINTAINERCLEANFILES would be wrong
-    my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS');
-    foreach $mark (@marks) {
-        while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) {
-	    my $cleanfiles_str = $2;
-            foreach $file (split('[\034\s]+', $cleanfiles_str)) {
-                $file =~ s/\.\///;
-                $foundfiles{$file} = 0 if (defined $foundfiles{$file});
-            }
-        }
-    }
-    my @files = ("Makefile", "config.cache", "config.log", "stamp-h",
-                 "stamp-h1", "stamp-h1", "config.h", "Makefile", 
-                 "config.status", "config.h", "libtool", "core" );
-    foreach $file (@files) {
-        $foundfiles{$file} = 0 if (defined $foundfiles{$file});
-    }
-
-    my $KDE_DIST = "";
-    foreach $file (keys %foundfiles) {
-        if ($foundfiles{$file} == 1) {
-            $KDE_DIST .= "$file ";
-        }
-    }
-    if ($KDE_DIST) {
-        print "KDE_DIST $printname $KDE_DIST\n" if ($verbose);
-
-        my $lookup = "DISTFILES *=(.*)";
-        if ($MakefileData =~ /\n$lookup\n/o) {
-            substituteLine($lookup, "KDE_DIST=$KDE_DIST\n\nDISTFILES=$1 \$(KDE_DIST)\n");
-        }
-    }
-}
-
-#-----------------------------------------------------------------------------
-# Returns 0 if the line was processed - 1 otherwise.
-# Errors are logged in the global $errorflags
-sub tag_DOCFILES ()
-{
-    $target_adds{"all"} .= "docs-am ";
-
-    my $lookup = 'KDE_DOCS\s*=\s*([^\n]*)';
-    goto nodocs    if ($MakefileData !~ /\n$lookup/o);
-    print STDOUT "KDE_DOCS processing <$1>\n"   if ($verbose);
-
-    my $tmp = $1;
-
-    # Either find the files in the directory (AUTO) or use
-    # only the specified po files.
-    my $files = "";
-    my $appname = $tmp;
-    $appname =~ s/^(\S*)\s*.*$/$1/;
-    if ($appname =~ /AUTO/) {
-      $appname = basename($makefileDir);
-      if ("$appname" eq "en") {
-      	  print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n";
-          exit(1);
-      }
-    }
-
-    if ($tmp !~ / - /)
-    {
-        opendir (THISDIR, ".");
-	foreach $entry (readdir(THISDIR)) {
-	  next if ($entry eq "CVS" || $entry =~ /^\./  || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry eq "core" || $entry eq "index.cache.bz2");
-	  next if (! -f $entry);
-	  $files .= "$entry ";
-	}
-        closedir (THISDIR);
-        print STDOUT "docfiles found = $files\n"   if ($verbose);
-    }
-    else
-    {
-        $tmp =~ s/\034/ /g;
-	$tmp =~ s/^\S*\s*-\s*//;
-        $files = $tmp;
-    }
-    goto nodocs if (!$files);        # Nothing to do
-
-    if ($files =~ /(^| )index\.docbook($| )/) {
-
-      my $lines = "";
-      my $lookup = 'MEINPROC\s*=';
-      if ($MakefileData !~ /\n($lookup)/) {
-	$lines = "MEINPROC=/\$(kde_bindir)/meinproc\n";
-      }
-      $lookup = 'KDE_XSL_STYLESHEET\s*=';
-      if ($MakefileData !~ /\n($lookup)/) {
-        $lines .= "KDE_XSL_STYLESHEET=/\$(kde_datadir)/ksgmltools2/customization/kde-chunk.xsl\n";
-      }
-      $lookup = '\nindex.cache.bz2:';
-      if ($MakefileData !~ /\n($lookup)/) {
-         $lines .= "index.cache.bz2: \$(srcdir)/index.docbook \$(KDE_XSL_STYLESHEET) $files\n";
-         $lines .= "\t\@if test -n \"\$(MEINPROC)\"; then echo \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; fi\n";
-         $lines .= "\n";
-      }
-
-      $lines .= "docs-am: index.cache.bz2\n";
-      $lines .= "\n";
-      $lines .= "install-docs: docs-am install-nls\n";
-      $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n";
-      $lines .= "\t\@if test -f index.cache.bz2; then \\\n";
-      $lines .= "\techo \$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n";
-      $lines .= "\t\$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n";
-      $lines .= "\telif test -f  \$(srcdir)/index.cache.bz2; then \\\n";
-      $lines .= "\techo \$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n";
-      $lines .= "\t\$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n";
-      $lines .= "\tfi\n";
-      $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n";
-      $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n";
-
-      $lines .= "\n";
-      $lines .= "uninstall-docs:\n";
-      $lines .= "\t-rm -rf \$(kde_htmldir)/$kdelang/$appname\n";
-      $lines .= "\n";
-      $lines .= "clean-docs:\n";
-      $lines .= "\t-rm -f index.cache.bz2\n";
-      $lines .= "\n";
-      $target_adds{"install-data-am"} .= "install-docs ";
-      $target_adds{"uninstall"} .= "uninstall-docs ";
-      $target_adds{"clean-am"} .= "clean-docs ";
-      appendLines ($lines);
-    } else {
-      appendLines("docs-am: $files\n");
-    }
-
-    $target_adds{"install-data-am"} .= "install-nls ";
-    $target_adds{"uninstall"} .= "uninstall-nls ";
-
-    $tmp = "install-nls:\n";
-    $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n";
-    $tmp .= "\t\@for base in $files; do \\\n";
-    $tmp .= "\t  echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
-    $tmp .= "\t  \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
-    $tmp .= "\tdone\n";
-    if ($appname eq 'common') {
-      $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n";
-      $tmp .= "\tif test ! -f \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n";
-      $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n";
-      $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n";
-      $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n";
-      $tmp .= "\t  case \" $files \" in \\\n";
-      $tmp .= "\t    *\" \$\$p \"*) ;; \\\n";
-      $tmp .= "\t    *) test ! -f \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n";
-      $tmp .= "\t  esac ; \\\n";
-      $tmp .= "\tdone ; fi ; true\n";
-    }
-    $tmp .= "\n";
-    $tmp .= "uninstall-nls:\n";
-    $tmp .= "\tfor base in $files; do \\\n";
-    $tmp .= "\t  rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n";
-    $tmp .= "\tdone\n\n";
-    appendLines ($tmp);
-
-    $target_adds{"distdir"} .= "distdir-nls ";
-
-    $tmp = "distdir-nls:\n";
-    $tmp .= "\tfor file in $files; do \\\n";
-    $tmp .= "\t  cp \$(srcdir)/\$\$file \$(distdir); \\\n";
-    $tmp .= "\tdone\n";
-
-    appendLines ($tmp);
-
-    return 0;
-
-  nodocs:
-    appendLines("docs-am:\n");
-    return 1;
-}
-
-#-----------------------------------------------------------------------------
-# Find headers in any of the source directories specified previously, that
-# are candidates for "moc-ing".
-sub findMocCandidates ()
-{
-    foreach $dir (@headerdirs)
-    {
-        my @list = ();
-        opendir (SRCDIR, "$dir");
-        @hFiles = grep { /.+\.$hExt$/o && !/^\./ } readdir(SRCDIR);
-        closedir SRCDIR;
-        foreach $hf (@hFiles)
-        {
-            next if ($hf =~ /^\.\#/);
-	    $hf =~ /(.*)\.[^\.]*$/;          # Find name minus extension
-	    next if ($uiFiles{$1});
-            open (HFIN, "$dir/$hf") || die "Could not open $dir/$hf: $!\n";
-            my $hfsize = 0;
-            seek(HFIN, 0, 2);
-            $hfsize = tell(HFIN);
-            seek(HFIN, 0, 0);
-            read HFIN, $hfData, $hfsize;
-            close HFIN;
-            # push (@list, $hf) if(index($hfData, "Q_OBJECT") >= 0); ### fast but doesn't handle //Q_OBJECT
-	    # handle " { friend class blah; Q_OBJECT ", but don't match antlarr_Q_OBJECT (\b).
-            if ( $hfData =~ /{([^}]*)\bQ_OBJECT/s ) {
-                push (@list, $hf) unless $1 =~ m://[^\n]*Q_OBJECT[^\n]*$:s;  ## reject "// Q_OBJECT"
-            }
-        }
-        # The assoc array of root of headerfile and header filename
-        foreach $hFile (@list)
-        {
-            $hFile =~ /(.*)\.[^\.]*$/;          # Find name minus extension
-            if ($mocFiles{$1})
-            {
-              print STDERR "Warning: Multiple header files found for $1\n";
-              next;                           # Use the first one
-            }
-            $mocFiles{$1} = "$dir\035$hFile";   # Add relative dir
-        }
-    }
-
-    return 0;
-}
-
-#-----------------------------------------------------------------------------
-
-# The programmer has specified a moc list. Prune out the moc candidates
-# list that we found based on looking at the header files. This generates
-# a warning if the programmer gets the list wrong, but this doesn't have
-# to be fatal here.
-sub pruneMocCandidates ($)
-{
-    my %prunedMoc = ();
-    local @mocList = split(' ', $_[0]);
-
-    foreach $mocname (@mocList)
-    {
-        $mocname =~ s/\.moc$//;
-        if ($mocFiles{$mocname})
-        {
-            $prunedMoc{$mocname} = $mocFiles{$mocname};
-        }
-        else
-        {
-            my $print = $makefileDir;
-            $print =~ s/^\Q$topdir\E\\//;
-            # They specified a moc file but we can't find a header that
-            # will generate this moc file. That's possible fatal!
-            print STDERR "Warning: No moc-able header file for $print/$mocname\n";
-        }
-    }
-
-    undef %mocFiles;
-    %mocFiles = %prunedMoc;
-}
-
-#-----------------------------------------------------------------------------
-
-# Finds the cpp files (If they exist).
-# The cpp files get appended to the header file separated by \035
-sub checkMocCandidates ()
-{
-    my @cppFiles;
-    my $cpp2moc;  # which c++ file includes which .moc files
-    my $moc2cpp;  # which moc file is included by which c++ files
-
-    return unless (keys %mocFiles);
-    opendir(THISDIR, ".") || return;
-    @cppFiles = grep { /.+\.$cppExt$/o  && !/.+\.moc\.$cppExt$/o
-                         && !/.+\.all_$cppExt\.$cppExt$/o
-			 && !/^\./  } readdir(THISDIR);
-    closedir THISDIR;
-    return unless (@cppFiles);
-    my $files = join (" ", @cppFiles);
-    $cpp2moc = {};
-    $moc2cpp = {};
-    foreach $cxxf (@cppFiles)
-    {
-      open (CXXFIN, $cxxf) || die "Could not open $cxxf: $!\n";
-      seek(CXXFIN, 0, 2);
-      my $cxxfsize = tell(CXXFIN);
-      seek(CXXFIN, 0, 0);
-      read CXXFIN, $cxxfData, $cxxfsize;
-      close CXXFIN;
-      while(($cxxfData =~ m/^[ \t]*\#include\s*[<\"](.*\.moc)[>\"]/gm)) {
-	$cpp2moc->{$cxxf}->{$1} = 1;
-	$moc2cpp->{$1}->{$cxxf} = 1;
-      }
-    }
-    foreach my $mocFile (keys (%mocFiles))
-    {
-	@cppFiles = keys %{$moc2cpp->{"$mocFile.moc"}};
-        if (@cppFiles == 1) {
-            $mocFiles{$mocFile} .= "\035" . $cppFiles[0];
-	    push(@deped, $mocFile);
-        } elsif (@cppFiles == 0) {
-            push (@newObs, $mocFile);           # Produce new object file
-            next    if ($haveAutomocTag);       # This is expected...
-            # But this is an error we can deal with - let them know
-            print STDERR
-                "Warning: No c++ file that includes $mocFile.moc\n";
-        } else {
-            # We can't decide which file to use, so it's fatal. Although as a
-            # guess we could use the mocFile.cpp file if it's in the list???
-            print STDERR
-                "Error: Multiple c++ files that include $mocFile.moc\n";
-            print STDERR "\t",join ("\t", @cppFiles),"\n";
-            $errorflag = 1;
-            delete $mocFiles{$mocFile};
-            # Let's continue and see what happens - They have been told!
-        }
-    }
-}
-
-#-----------------------------------------------------------------------------
-
-# Add the rules for generating moc source from header files
-# For Automoc output *.moc.cpp but normally we'll output *.moc
-# (We must compile *.moc.cpp separately. *.moc files are included
-# in the appropriate *.cpp file by the programmer)
-sub addMocRules ()
-{
-    my $cppFile;
-    my $hFile;
-
-    foreach $mocFile (keys (%mocFiles))
-    {
-        undef $cppFile;
-        ($dir, $hFile, $cppFile) =  split ("\035", $mocFiles{$mocFile}, 3);
-        $dir =~ s#^\.#\$(srcdir)#;
-        if (defined ($cppFile))
-        {
-	  $cppFile =~ s,\.[^.]*$,,;
-	  $target_adds{"$cppFile.o"} .= "$mocFile.moc ";
-	  $target_adds{"$cppFile.lo"} .= "$mocFile.moc ";
-	  appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n");
-	  $cleanMoc .= " $mocFile.moc";
-	  appendLines ("mocs: $mocFile.moc");
-        }
-        else
-        {
-            appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n");
-            $cleanMoc .= " $mocFile$mocExt";
-	    appendLines ("mocs: $mocFile$mocExt");
-        }
-    }
-}
-
-sub make_bcheck_target()
-{
-    my $lookup = 'RECURSIVE_TARGETS\s*=\s*(.*)';
-    my $bcheckdep = "bcheck-am";
-    if ($MakefileData =~ /\n$lookup/) {
-      substituteLine($lookup, "RECURSIVE_TARGETS = $1 bcheck-recursive");
-      $bcheckdep = "bcheck-recursive";
-    }
-
-    my $headers= "";
-    $headers = $1 if($MakefileData =~ /\nHEADERS\s*=\s*(.+)/);
-    $headers =~ s/\$\((?:noinst|EXTRA)_HEADERS\)//g;
-
-    $target_adds{"clean-am"} .= "clean-bcheck ";
-
-    my $t = "clean-bcheck: \n" .
-            "\trm -f *.bchecktest.cc *.bchecktest.cc.class\n\n" .
-            "bcheck: $bcheckdep\n\n" .
-            "bcheck-am:\n" .
-           "\t\@for i in $headers; do \\\n" .
-           "\t    if test \$(srcdir)/\$\$i -nt \$\$i.bchecktest.cc; then \\\n" . 
-           "\t        echo \"int main() {return 0;}\" > \$\$i.bchecktest.cc ; \\\n" .
-           "\t        echo \"#include \\\"\$\$i\\\"\" >> \$\$i.bchecktest.cc ; \\\n" .
-           "\t        echo \"\$\$i\"; \\\n" . 
-           "\t        if ! ";
-    $t .=  $cxxsuffix eq "KKK" ?
-           "\$(CXX) \$(DEFS) -I. -I\$(srcdir) -I\$(top_builddir) \$(INCLUDES) \$(AM_CPPFLAGS) \$(CPPFLAGS) \$(KDE_CXXFLAGS) " :
-           "\$(CXXCOMPILE) ";
-    $t .=  " --dump-class-hierarchy \$\$i.bchecktest.cc; then \\\n" .
-           "\t            rm -f \$\$i.bchecktest.cc; exit 1; \\\n" .
-           "\t        fi ; \\\n" .
-           "\t        echo \"\" >> \$\$i.bchecktest.cc.class; \\\n" .
-           "\t        perl \$(top_srcdir)/admin/bcheck.pl \$\$i.bchecktest.cc.class || { rm -f \$\$i.bchecktest.cc; exit 1; }; \\\n" .
-           "\t    fi ; \\\n" .
-           "\tdone\n";
-    appendLines("$t\n");
-}
-
-sub make_meta_classes ()
-{
-    return if ($kdeopts{"qtonly"});
-
-    my $cppFile;
-    my $hFile;
-    my $moc_class_headers = "";
-    foreach $program (@programs) {
-	my $mocs = "";
-	my @progsources = split(/[\034\s]+/, $sources{$program});
-	my @depmocs = split(' ', $depedmocs{$program});
-	my %shash = (), %mhash = ();
-	@shash{@progsources} = 1;  # we are only interested in the existence
-	@mhash{@depmocs} = 1;
-
-	print STDOUT "program=$program\n" if ($verbose);
-	print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose);
-	print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose);
-	print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose);
-	foreach my $mocFile (keys (%globalmocs))
-	{
-	    my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3);
-	    if (defined ($cppFile))
-	    {
-		$mocs .= " $mocFile.moc" if exists $shash{$cppFile};
-	    }
-	    else
-	    {
-		# Bah. This is the case, if no C++ file includes the .moc
-		# file. We make a .moc.cpp file for that. Unfortunately this
-		# is not included in the %sources hash, but rather is mentioned
-		# in %depedmocs. If the user wants to use AUTO he can't just
-		# use an unspecific METAINCLUDES. Instead he must use
-		# program_METAINCLUDES. Anyway, it's not working real nicely.
-		# E.g. Its not clear what happens if user specifies two
-		# METAINCLUDES=AUTO in the same Makefile.am.
-		$mocs .= " $mocFile.moc.$cxxsuffix"
-		    if exists $mhash{$mocFile.".moc.$cxxsuffix"};
-	    }
-	}
-	if ($mocs) {
-	    print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose);
-	}
-	print STDOUT "\n" if $verbose;
-    }
-    if ($moc_class_headers) {
-        appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n");
-        $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes ";
-    }
-}
-
-#-----------------------------------------------------------------------------
-
-sub updateMakefile ()
-{
-    return if ($dryrun);
-
-    open (FILEOUT, "> $makefile")
-                        || die "Could not create $makefile: $!\n";
-
-    $MakefileData =~ s/\034/\\\n/g;    # Restore continuation lines
-    # Append our $progId line, _below_ the "generated by automake" line
-    # because automake-1.6 relies on the first line to be his own.
-    my $progIdLine = "\# $progId - " . '$Revision: 1.373 $ '."\n";
-    if ( !( $MakefileData =~ s/^(.*generated .*by automake.*\n)/$1$progIdLine/ ) ) {
-        warn "automake line not found in $makefile\n";
-	# Fallback: first line
-        print FILEOUT $progIdLine;
-    };
-    print FILEOUT $MakefileData;
-    close FILEOUT;
-}
-
-#-----------------------------------------------------------------------------
-
-# The given line needs to be removed from the makefile
-# Do this by adding the special "removed line" comment at the line start.
-sub removeLine ($$)
-{
-    my ($lookup, $old) = @_;
-
-    $old =~ s/\034/\\\n#>- /g;          # Fix continuation lines
-    $MakefileData =~ s/\n$lookup/\n#>\- $old/;
-}
-
-#-----------------------------------------------------------------------------
-
-# Replaces the old line with the new line
-# old line(s) are retained but tagged as removed. The new line(s) have the
-# "added" tag placed before it.
-sub substituteLine ($$)
-{
-    my ($lookup, $new) = @_;
-
-    if ($MakefileData =~ /\n($lookup)/) {
-      $old = $1;
-      $old =~ s/\034/\\\n#>\- /g;         # Fix continuation lines
-      my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1;
-      $new =~ s/\\\n/\034/g;
-      $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/;
-    } else {
-      print STDERR "Warning: substitution of \"$lookup\" in $printname failed\n";
-    }
-}
-
-#-----------------------------------------------------------------------------
-
-# Slap new lines on the back of the file.
-sub appendLines ($)
-{
-  my ($new) = @_;
-  my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1;
-  $new =~ s/\\\n/\034/g;        # Fix continuation lines
-  $MakefileData .= "\n#>\+ $newCount\n$new";
-}
-
-#-----------------------------------------------------------------------------
-
-# Restore the Makefile.in to the state it was before we fiddled with it
-sub restoreMakefile ()
-{
-    $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g;
-    # Restore removed lines
-    $MakefileData =~ s/([\n\034])#>\- /$1/g;
-    # Remove added lines
-    while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/)
-    {
-        my $newCount = $1;
-        my $removeLines = "";
-        while ($newCount--) {
-            $removeLines .= "[^\n\034]*([\n\034]|)";
-        }
-        $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/;
-    }
-}
-
-#-----------------------------------------------------------------------------
diff --git a/admin/bcheck.pl b/admin/bcheck.pl
deleted file mode 100644
index 7bf5c42..0000000
--- a/admin/bcheck.pl
+++ /dev/null
@@ -1,155 +0,0 @@
-#!/usr/bin/perl -w
-
-use DB_File;
-use Fcntl ':flock';
-
-if (!defined($ARGV[0])) {
-    print "usage: requires .class dump as parameter!\n";
-    exit;
-}
-
-sub bailout
-{
-    untie %bcheckdb if(defined(%bcheckdb));
-
-    if(defined(MYLOCK)) {
-        flock MYLOCK, LOCK_UN;
-        close(MYLOCK);
-    }
-
-    print @_;
-    exit 5;
-}
-
-sub ask_user
-{
-    my ($dbkey, $dbchunk) = @_;
-
-    if (defined($ENV{"BCHECK_UPDATE"})) {
-        $bcheckdb{$dbkey} = $dbchunk;
-        return;
-    }
-
-    &bailout("BC problem detected") if (! -t STDIN);
-
-    print "(I)gnore / (Q)uit / (U)pdate: ";
-
-    my $key;
-    while(defined(read STDIN, $key, 1)) {
-        $key = lc($key);
-
-        print "got: >$key<\n";
-
-        return if ($key eq 'i');
-
-        &bailout("BC problem. aborted") if ($key eq 'q');
-
-        if ($key eq 'u') {
-            $bcheckdb{$dbkey} = $dbchunk;
-            return;
-        }
-        print "\n(I)gnore / (Q)uit / (U)pdate: ";
-    }
-}
-
-sub diff_chunk($$)
-{
-    my ($oldl, $newl) = @_;
-    my @old = split /^/m, $oldl;
-    my @new = split /^/m, $newl;
-    my $haschanges = 0;
-    my $max = $#old > $#new ? $#old : $#new;
-
-    die "whoops. key different" if ($old[0] ne $new[0]);
-
-    if ($#old != $#new) {
-        warn ("Structural difference.\n");
-        print @old;
-        print "-----------------------------------------------\n";
-        print @new;
-        $haschanges = 1;
-        return;
-    }
-
-    print $old[0];
-
-    my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/);
-
-    my $c = 1;
-    while ($c < $max) {
-        my ($o, $n) = ($old[$c], $new[$c]);
-        chomp $o;
-        chomp $n;
-        $c++;
-        next if ($o eq $n);
-
-        if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) {
-            print "comparing >$n< against >$1$class$2<\n";
-            next if ($n eq "$1$class$2");
-        }
-
-        $haschanges = 1;
-
-        print "-$o\n+$n\n\n";
-    }
-
-    return $haschanges;
-}
-
-local $dblock = $ENV{"HOME"} . "/bcheck.lock";
-my $dbfile = $ENV{"HOME"} . "/bcheck.db";
-my $cdump  = $ARGV[0];
-
-die "file $cdump is not readable: $!" if (! -f $cdump);
-
-# make sure the advisory lock exists
-open(MYLOCK, ">$dblock");
-print MYLOCK "";
-
-flock MYLOCK, LOCK_EX;
-
-tie %bcheckdb, 'DB_File', $dbfile;
-
-my $chunk = "";
-
-open (IN, "<$cdump") or die "cannot open $cdump: $!";
-while (<IN>) {
-
-    chop;
-
-    s/0x[0-9a-fA-F]+/0x......../g;
-
-    $chunk .= $_ . "\n";
-
-    if(/^\s*$/) {
-        my @lines = split /^/m, $chunk;
-        my $key = $lines[0];
-        chomp $key;
-
-        if($key !~ /<anonymous struct>/ &&
-           $key !~ /<anonymous union>/) {
-            if(defined($bcheckdb{$key})) {
-                my $dbversion = $bcheckdb{$key};
-
-                if($dbversion ne $chunk) {
-                     &ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk));
-                }
-            }
-            else {
-                $bcheckdb{$key} = $chunk;
-                print "NEW: $key\n";
-            }
-        }
-
-        $chunk = "";
-        next;
-    }
-
-}
-close(IN);
-
-untie %bcheckdb;
-flock MYLOCK, LOCK_UN;
-close(MYLOCK);
-
-exit 0;
diff --git a/admin/compile b/admin/compile
deleted file mode 100755
index 9bb997a..0000000
--- a/admin/compile
+++ /dev/null
@@ -1,99 +0,0 @@
-#! /bin/sh
-
-# Wrapper for compilers which do not understand `-c -o'.
-
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Usage:
-# compile PROGRAM [ARGS]...
-# `-o FOO.o' is removed from the args passed to the actual compile.
-
-prog=$1
-shift
-
-ofile=
-cfile=
-args=
-while test $# -gt 0; do
-   case "$1" in
-    -o)
-       # configure might choose to run compile as `compile cc -o foo foo.c'.
-       # So we do something ugly here.
-       ofile=$2
-       shift
-       case "$ofile" in
-	*.o | *.obj)
-	   ;;
-	*)
-	   args="$args -o $ofile"
-	   ofile=
-	   ;;
-       esac
-       ;;
-    *.c)
-       cfile=$1
-       args="$args $1"
-       ;;
-    *)
-       args="$args $1"
-       ;;
-   esac
-   shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-   # If no `-o' option was seen then we might have been invoked from a
-   # pattern rule where we don't need one.  That is ok -- this is a
-   # normal compilation that the losing compiler can handle.  If no
-   # `.c' file was seen then we are probably linking.  That is also
-   # ok.
-   exec "$prog" $args
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
-while true; do
-   if mkdir $lockdir > /dev/null 2>&1; then
-      break
-   fi
-   sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir $lockdir; exit 1" 1 2 15
-
-# Run the compile.
-"$prog" $args
-status=$?
-
-if test -f "$cofile"; then
-   mv "$cofile" "$ofile"
-fi
-
-rmdir $lockdir
-exit $status
diff --git a/admin/conf.change.pl b/admin/conf.change.pl
deleted file mode 100644
index ccef6b4..0000000
--- a/admin/conf.change.pl
+++ /dev/null
@@ -1,190 +0,0 @@
-#!/usr/bin/perl -w
-
-# this script patches a config.status file, to use our own perl script
-# in the main loop
-# we do it this way to circumvent hacking (and thereby including)
-# autoconf function (which are GPL) into our LGPL acinclude.m4.in
-# written by Michael Matz <matz@kde.org>
-# adapted by Dirk Mueller <mueller@kde.org>
-#
-#   This file is free software; you can redistribute it and/or
-#   modify it under the terms of the GNU Library General Public
-#   License as published by the Free Software Foundation; either
-#   version 2 of the License, or (at your option) any later version.
-
-#   This library is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-#   Library General Public License for more details.
-
-#   You should have received a copy of the GNU Library General Public License
-#   along with this library; see the file COPYING.LIB.  If not, write to
-#   the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-#   Boston, MA 02111-1307, USA.
-
-# we have to change two places
-# 1. the splitting of the substitutions into chunks of 90 (or even 48 in
-#    later autoconf's
-# 2. the big main loop which patches all Makefile.in's
-
-use File::Basename;
-
-my $ac_aux_dir = dirname($0);
-my ($flag);
-local $ac_version = 0;
-my $vpath_seen = 0;
-$flag = 0;
-
-while (<>) {
-# usage of $flag: 0 -- we have seen nothing yet
-#   1 -- we are in (1)
-#   2 -- we have ended (1)
-#   3 -- we are in (2)
-#   4 -- we ended (2)
-
-    if ($flag == 4) {
-        print;
-    } elsif ($flag == 0) {
-# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..."
-#    ends with (excluding) "CONFIG_FILE=..."
-#    in later autoconf (2.14.1) there is no CONFIG_FILES= line,
-#    but instead the (2) directly follow (1)
-        if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) {
-	    $flag = 1;
-	    if ($1 eq 'lines') {
-                # lets hope its different with 2141, 
-                # wasn't able to verify that
-              if ($2 eq '48') {
-                $ac_version = 250;
-              }
-              else {
-	        $ac_version = 2141;
-              }
-	    } elsif ($1 eq 'cmds') {
-	        $ac_version = 213;
-	    }
-	    # hmm, we don't know the autoconf version, but we try anyway
-	} else {
-	    print;
-	}
-    } elsif ($flag == 1) {
-        if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) {
-	     print;
-	     $flag = 2;
-	} elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
-	     $flag = 3;
-	}
-    } elsif ($flag == 2) {
-# 2. begins with: "for ac_file in.*CONFIG_FILES"  (the next 'for' after (1))
-#    end with: "rm -f conftest.s\*"
-# on autoconf 250, it ends with '# CONFIG_HEADER section'
-#
-# gg: if a post-processing commands section is found first, 
-#    stop there and insert a new loop to honour the case/esac.
-# (pattern: /^\s+#\sRun the commands associated with the file./)
-
-	if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
-	    $flag = 3;
-	} else {
-	    print;
-	}
-    } elsif ($flag == 3) {
-        if (/^\s*rm\s+-f\s+conftest/ ) {
-	    $flag = 4;
-	    &insert_main_loop();
-	} elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) {
-	    $flag = 4;
-	    &insert_main_loop();
-	    #die "hhhhhhh";
-	    if ($ac_version != 2141) {
-	        print STDERR "hmm, don't know autoconf version\n";
-	    }
-        } elsif (/^\#\s*CONFIG_HEADER section.*|^\s+#\s(Run) the commands associated/) {
-          $flag = 4;
-          $commands = defined $1;
-          &insert_main_loop();
-          $commands && insert_command_loop();
-          if($ac_version != 250) {
-            print STDERR "hmm, something went wrong :-(\n";
-          }
-	} elsif (/VPATH/ ) {
-	    $vpath_seen = 1;
-	}
-    }
-}
-
-die "wrong input (flag != 4)" unless $flag == 4;
-print STDERR "hmm, don't know autoconf version\n" unless $ac_version;
-
-sub insert_main_loop {
-
-  if ($ac_version == 250) {
-    &insert_main_loop_250();
-  }
-  else {
-    &insert_main_loop_213();
-  }
-}
-
-sub insert_main_loop_250 {
-
-  print <<EOF;
-  #echo Doing the fast build of Makefiles -- autoconf $ac_version
-EOF
-    if ($vpath_seen) {
-        print <<EOF;
-        # VPATH subst was seen in original config.status main loop
-  echo '/^[ 	]*VPATH[ 	]*=[^:]*\$/d' >>\$tmp/subs.sed
-EOF
-      }
-  print <<EOF;
-  rm -f \$tmp/subs.files
-  for ac_file in .. \$CONFIG_FILES ; do
-      if test "x\$ac_file" != x..; then
-          echo \$ac_file >> \$tmp/subs.files
-      fi
-  done
-  if test -f \$tmp/subs.files ; then
-      perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL"
-  fi
-  rm -f \$tmp/subs.files
-
-fi
-EOF
-  return;
-}
-
-sub insert_main_loop_213 {
-    print <<EOF;
-#echo Doing the fast build of Makefiles -- autoconf $ac_version
-if test "x\$ac_cs_root" = "x" ; then
-    ac_cs_root=conftest
-fi
-EOF
-    if ($vpath_seen) {
-      print <<EOF;
-# VPATH subst was seen in original config.status main loop
-echo '/^[ 	]*VPATH[ 	]*=[^:]*\$/d' >> \$ac_cs_root.subs
-EOF
-    }
-    print <<EOF;
-rm -f \$ac_cs_root.sacfiles
-for ac_file in .. \$CONFIG_FILES ; do
-    if test "x\$ac_file" != x..; then
-        echo \$ac_file >> \$ac_cs_root.sacfiles
-    fi
-done
-if test -f \$ac_cs_root.sacfiles ; then
-    perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL"
-fi
-rm -f \$ac_cs_root.s*
-
-EOF
-    return;
-}
-
-sub insert_command_loop {
-    print <<EOF;
-  for ac_file in .. \$CONFIG_FILES ; do
-EOF
-}
diff --git a/admin/config.guess b/admin/config.guess
deleted file mode 100755
index 5145e35..0000000
--- a/admin/config.guess
+++ /dev/null
@@ -1,1363 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002 Free Software Foundation, Inc.
-
-timestamp='2002-10-21'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
-    --version | -v )
-       echo "$version" ; exit 0 ;;
-    --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# This shell variable is my proudest work .. or something. --bje
-
-set_cc_for_build='tmpdir=${TMPDIR-/tmp}/config-guess-$$ ;
-(old=`umask` && umask 077 && mkdir $tmpdir && umask $old && unset old)
-   || (echo "$me: cannot create $tmpdir" >&2 && exit 1) ;
-dummy=$tmpdir/dummy ;
-files="$dummy.c $dummy.o $dummy.rel $dummy" ;
-trap '"'"'rm -f $files; rmdir $tmpdir; exit 1'"'"' 1 2 15 ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	rm -f $files ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ;
-unset files'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval $set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-	        os=netbsd
-		;;
-	esac
-	# The OS release
-	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
-	exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvmeppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mipseb-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	eval $set_cc_for_build
-	cat <<EOF >$dummy.s
-	.data
-\$Lformat:
-	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
-
-	.text
-	.globl main
-	.align 4
-	.ent main
-main:
-	.frame \$30,16,\$26,0
-	ldgp \$29,0(\$27)
-	.prologue 1
-	.long 0x47e03d80 # implver \$0
-	lda \$2,-1
-	.long 0x47e20c21 # amask \$2,\$1
-	lda \$16,\$Lformat
-	mov \$0,\$17
-	not \$1,\$18
-	jsr \$26,printf
-	ldgp \$29,0(\$26)
-	mov 0,\$16
-	jsr \$26,exit
-	.end main
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null
-	if test "$?" = 0 ; then
-		case `$dummy` in
-			0-0)
-				UNAME_MACHINE="alpha"
-				;;
-			1-0)
-				UNAME_MACHINE="alphaev5"
-				;;
-			1-1)
-				UNAME_MACHINE="alphaev56"
-				;;
-			1-101)
-				UNAME_MACHINE="alphapca56"
-				;;
-			2-303)
-				UNAME_MACHINE="alphaev6"
-				;;
-			2-307)
-				UNAME_MACHINE="alphaev67"
-				;;
-			2-1307)
-				UNAME_MACHINE="alphaev68"
-				;;
-			3-1307)
-				UNAME_MACHINE="alphaev7"
-				;;
-		esac
-	fi
-	rm -f $dummy.s $dummy && rmdir $tmpdir
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit 0 ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit 0 ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit 0;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
-	exit 0 ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit 0 ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit 0 ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7 && exit 0 ;;
-	esac ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit 0 ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c \
-	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-	rm -f $dummy.c $dummy && rmdir $tmpdir
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit 0 ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit 0 ;;
-    Night_Hawk:*:*:PowerMAX_OS)
-	echo powerpc-harris-powermax
-	exit 0 ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit 0 ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit 0 ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit 0 ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
- 	exit 0 ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit 0 ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit 0 ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit 0 ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit 0 ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit 0 ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-		rm -f $dummy.c $dummy && rmdir $tmpdir
-		echo rs6000-ibm-aix3.2.5
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit 0 ;;
-    *:AIX:*:[45])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit 0 ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit 0 ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit 0 ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit 0 ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit 0 ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit 0 ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
-
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
-
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
-
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
-EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
-		    rm -f $dummy.c $dummy && rmdir $tmpdir
-		fi ;;
-	esac
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux${HPUX_REV}
-	exit 0 ;;
-    3050*:HI-UX:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-	rm -f $dummy.c $dummy && rmdir $tmpdir
-	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit 0 ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit 0 ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit 0 ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit 0 ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit 0 ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit 0 ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit 0 ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit 0 ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit 0 ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit 0 ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit 0 ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit 0 ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*T3D:*:*:*)
-	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:FreeBSD:*:*)
-	# Determine whether the default compiler uses glibc.
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#if __GLIBC__ >= 2
-	LIBC=gnu
-	#else
-	LIBC=
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	rm -f $dummy.c && rmdir $tmpdir
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
-	exit 0 ;;
-    i*:CYGWIN*:*)
-	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
-    i*:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
-    i*:PW*:*)
-	echo ${UNAME_MACHINE}-pc-pw32
-	exit 0 ;;
-    x86:Interix*:3*)
-	echo i386-pc-interix3
-	exit 0 ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i386-pc-interix
-	exit 0 ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit 0 ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    *:GNU:*:*)
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
-    i*86:Minix:*:*)
-	echo ${UNAME_MACHINE}-pc-minix
-	exit 0 ;;
-    arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    mips:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips
-	#undef mipsel
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	rm -f $dummy.c && rmdir $tmpdir
-	test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0
-	;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit 0 ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit 0 ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit 0 ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
-	esac
-	exit 0 ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit 0 ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit 0 ;;
-    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
-    x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
-	exit 0 ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0 ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0 ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit 0 ;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#ifdef __INTEL_COMPILER
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	rm -f $dummy.c && rmdir $tmpdir
-	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
-	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
-	;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit 0 ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit 0 ;;
-    i*86:*:5:[78]*)
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit 0 ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit 0 ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit 0 ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit 0 ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit 0 ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit 0 ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit 0 ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit 0 ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit 0 ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit 0 ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit 0 ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit 0 ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit 0 ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit 0 ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit 0 ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit 0 ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit 0 ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit 0 ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit 0 ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
-    *:Darwin:*:*)
-	echo `uname -p`-apple-darwin${UNAME_RELEASE}
-	exit 0 ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit 0 ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit 0 ;;
-    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit 0 ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit 0 ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit 0 ;;
-    DS/*:UNIX_System_V:*:*)
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit 0 ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = "386"; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo ${UNAME_MACHINE}-unknown-plan9
-	exit 0 ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit 0 ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit 0 ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit 0 ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit 0 ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit 0 ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit 0 ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit 0 ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-rm -f $dummy.c $dummy && rmdir $tmpdir
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit 0 ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit 0 ;;
-    c34*)
-	echo c34-convex-bsd
-	exit 0 ;;
-    c38*)
-	echo c38-convex-bsd
-	exit 0 ;;
-    c4*)
-	echo c4-convex-bsd
-	exit 0 ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-    ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/admin/config.pl b/admin/config.pl
deleted file mode 100644
index 80ecbf1..0000000
--- a/admin/config.pl
+++ /dev/null
@@ -1,235 +0,0 @@
-#!/usr/bin/perl
-# a script for use by autoconf to make the Makefiles
-# from the Makefile.in's
-#
-# the original autoconf mechanism first splits all substitutions into groups
-# of ca. 90, and than invokes sed for _every_ Makefile.in and every group
-# (so around 2-3 times per Makefile.in). So this takes forever, as sed
-# has to recompile the regexps every time.
-#
-# this script does better. It changes all Makefile.ins in one process.
-# in tdelibs the time for building Makefile went down from 2:59 min to 13 sec!
-#
-# written by Michael Matz <matz@kde.org>
-# adapted by Dirk Mueller <mueller@kde.org>
-
-#   This file is free software; you can redistribute it and/or
-#   modify it under the terms of the GNU Library General Public
-#   License as published by the Free Software Foundation; either
-#   version 2 of the License, or (at your option) any later version.
-
-#   This library is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-#   Library General Public License for more details.
-
-#   You should have received a copy of the GNU Library General Public License
-#   along with this library; see the file COPYING.LIB.  If not, write to
-#   the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-#   Boston, MA 02111-1307, USA.
-
-my $ac_subs=$ARGV[0];
-my $ac_sacfiles = $ARGV[1];
-my $ac_given_srcdir=$ARGV[2];
-my $ac_given_INSTALL=$ARGV[3];
-
-#print "ac_subs=$ac_subs\n";
-#print "ac_sacfiles=$ac_sacfiles\n";
-#print "ac_given_srcdir=$ac_given_srcdir\n";
-#print "ac_given_INSTALL=$ac_given_INSTALL\n";
-
-my ($srcdir, $top_srcdir);
-my $INSTALL;
-my $bad_perl = ($] < 5.005);
-
-open(CF, "< $ac_subs") || die "can't open $ac_subs: $!";
-my @subs = <CF>;
-close(CF);
-chomp @subs;
-@comp_match=();
-@comp_subs=();
-
-if ($bad_perl) {
-    print "Using perl older than version 5.005\n";
-    foreach my $pat (@subs) {
-	if (  ($pat =~ m/s%([^%]*)%([^%]*)%g/ )
-	   || ($pat =~ m/s%([^%]*)%([^%]*)%;t/ )
-           || ($pat =~ m/s,([^,]*),(.*),;t/)
-	   || ($pat =~ m%s/([^/]*)/([^/]*)/g% )
-	   || ($pat =~ m%s/([^/]*)/([^/]*)/;t% )
-	   ) {
-            # form : s%bla%blubb%g
-            # or     s%bla%blubb%;t t   (autoconf > 2.13 and < 2.52 ?)
-            # or     s,bla,blubb,;t t   (autoconf 2.52)
-            my $srch = $1;
-            my $repl = $2;
-            $repl =~ s/\\(.)/$1/g;
-	    push @comp_subs, make_closure($srch, $repl);
-
-	} elsif ( ($pat =~ /%([^%]*)%d/ )
-	   || ($pat =~ m%/([^/]*)/d% )
-	   ) {
-	    push @comp_subs, make_closure($1, "");
-	} else {
-	    die "Uhh. Malformed pattern in $ac_subs ($pat)"
-		unless ( $pat =~ /^\s*$/ );   # ignore white lines
-	}
-    }
-} else {
-    foreach my $pat (@subs) {
-       if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) ||
-            ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) ||
-            ($pat =~ /s,([^,]*),(.*),;t/) ) {
-         # form : s%bla%blubb%g
-         # or     s%bla%blubb%;t t   (autoconf > 2.13 and < 2.52 ?)
-         # or     s,bla,blubb,;t t   (autoconf 2.52)
-         my $srch = $1;
-         my $repl = $2;
-         push @comp_match, eval "qr/\Q$srch\E/";  # compile match pattern
-         $repl =~ s/\\(.)/$1/g;
-         push @comp_subs, $repl;
-      } elsif ( ($pat =~ /%([^%]*)%d/ )
-                || ($pat =~ m%/([^/]*)/d% )
-              ) {
-        push @comp_match, eval "qr/\Q$1\E/";
-        push @comp_subs, "";
-      } else {
-          die "Uhh. Malformed pattern in $ac_cs_root.subs ($pat)"
-          unless ( $pat =~ /^\s*$/ );   # ignore white lines
-      }
-    }
-}
-undef @subs;
-
-# read the list of files to be patched, form:
-# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile
-
-open(CF, "< $ac_sacfiles") || die "can't open $ac_sacfiles: $!";
-my @ac_files = <CF>;
-close(CF);
-chomp @ac_files;
-
-
-my $ac_file;
-foreach $ac_file (@ac_files) {
-    next if $ac_file =~ /\.\./;
-    next if $ac_file =~ /^\s*$/;
-    my $ac_file_in;
-    my ($ac_dir, $ac_dots, $ac_dir_suffix);
-
-    if ($ac_file =~ /.*:.*/ ) {
-	($ac_file_in = $ac_file) =~ s%[^:]*:%%;
-	$ac_file =~ s%:.*%%;
-    } else {
-	$ac_file_in = $ac_file.".in";
-    }
-
-# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-# Remove last slash and all that follows it.  Not all systems have dirname.
-    ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%;
-    if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) {
-# The file is in a subdirectory.
-	if (! -d "$ac_dir") { mkdir "$ac_dir", 0777; }
-	($ac_dir_suffix = $ac_dir) =~ s%^./%%;
-	$ac_dir_suffix="/".$ac_dir_suffix;
-# A "../" for each directory in $ac_dir_suffix.
-	($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g;
-    } else {
-	$ac_dir_suffix="";
-	$ac_dots="";
-    }
-
-    if ($ac_given_srcdir eq ".") {
-	$srcdir=".";
-	if ($ac_dots) {
-	    ( $top_srcdir = $ac_dots) =~ s%/$%%;
-	} else { $top_srcdir="."; }
-    } elsif ($ac_given_srcdir =~ m%^/%) {
-	$srcdir=$ac_given_srcdir.$ac_dir_suffix;
-	$top_srcdir = $ac_given_srcdir;
-    } else {
-	$srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix;
-	$top_srcdir = $ac_dots.$ac_given_srcdir;
-    }
-
-    if ($ac_given_INSTALL) {
-	if ($ac_given_INSTALL =~ m%^/% ) {
-	    $INSTALL = $ac_given_INSTALL;
-	} else {
-	    $INSTALL = $ac_dots.$ac_given_INSTALL;
-	}
-    }
-
-    print "fast creating $ac_file\n";
-    unlink $ac_file;
-    my $ac_comsub="";
-    my $fname=$ac_file_in;
-    $fname =~ s%.*/%%;
-    my $configure_input="Generated automatically from $fname by config.pl.";
-    if ($ac_file =~ /.*[Mm]akefile.*/) {
-	$ac_comsub="# ".$configure_input."\n";  # for the first line in $ac_file
-    }
-
-    my $ac_file_inputs;
-    ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%;
-    $ac_file_inputs =~ s%:% $ac_given_srcdir/%g;
-
-    patch_file($ac_file, $ac_file_inputs, $ac_comsub);
-}
-
-sub patch_file {
-    my ($outf, $infiles, $identline) = @_;
-    my $filedata;
-    my @infiles=split(' ', $infiles);
-    my $i=0;
-
-    foreach my $name (@infiles) {
-	if (open(CF, "< $name")) {
-	    while (<CF>) {
-		$filedata .= $_;
-	    }
-	    close(CF);
-	} else {
-	    print STDERR "can't open $name: $!"."\n";
-	}
-    }
-    if ($identline) {
-	# Put the ident in the second line.  For shitty automake 1.6x.
-	$filedata =~ s%\n%\n$identline%;
-    }
-
-    $filedata =~ s%\@configure_input\@%$configure_input%g;
-    $filedata =~ s%\@srcdir\@%$srcdir%g;
-    $filedata =~ s%\@top_srcdir\@%$top_srcdir%g;
-    $filedata =~ s%\@INSTALL\@%$INSTALL%g;
-
-    if ($bad_perl) {
-	while ($i <= $#comp_subs) {
-	    my $ref = $comp_subs[$i];
-	    &$ref(\$filedata);
-	    $i++;
-	}
-    } else {
-	while ($i <= $#comp_match) {
-	    $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g;
-	    $i++;
-	}
-    }
-    open(CF, "> $outf") || die "can't create $outf: $!";
-    print CF $filedata;
-    close(CF);
-}
-
-sub make_closure {
-    my ($pat, $sub) = @_;
-    $pat =~ s/\@/\\@/g;   # @bla@ -> \@bla\@
-    $pat =~ s/\$/\\\$/g;  # $bla -> \$bla
-    $sub =~ s/\@/\\@/g;
-    $sub =~ s/\$/\\\$/g;
-    my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%$pat%$sub%g; }";
-    if ($@) {
-        print "can't create CODE: $@\n";
-    }
-    return $ret;
-}
diff --git a/admin/config.sub b/admin/config.sub
deleted file mode 100755
index 1dea9b7..0000000
--- a/admin/config.sub
+++ /dev/null
@@ -1,1470 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002 Free Software Foundation, Inc.
-
-timestamp='2002-09-05'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
-    --version | -v )
-       echo "$version" ; exit 0 ;;
-    --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit 0;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis)
-		os=
-		basic_machine=$1
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
- 	-chorusrdb)
- 		os=-chorusrdb
-		basic_machine=$1
- 		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
-	| clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k \
-	| m32r | m68000 | m68k | m88k | mcore \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
-	| mips64orion | mips64orionel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| ns16k | ns32k \
-	| openrisc | or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-	| pyramid \
-	| sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
-	| strongarm \
-	| tahoe | thumb | tic80 | tron \
-	| v850 | v850e \
-	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
-	| z8k)
-		basic_machine=$basic_machine-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12)
-		# Motorola 68HC11/12.
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
-	| bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \
-	| clipper-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* \
-	| m32r-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39 | mipstx39el \
-	| none-* | np1-* | ns16k-* | ns32k-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-	| pyramid-* \
-	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \
-	| v850-* | v850e-* | vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
-	| ymp-* \
-	| z8k-*)
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	mingw32)
-		basic_machine=i386-pc
-		os=-mingw32
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	mmix*)
-		basic_machine=mmix-knuth
-		os=-mmixware
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	or32 | or32-*)
-		basic_machine=or32-unknown
-		os=-coff
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2)
-		basic_machine=i686-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc)	basic_machine=powerpc-unknown
-		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sparclite-wrs | simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3d)
-		basic_machine=alpha-cray
-		os=-unicos
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-        tic4x | c4x*)
-		basic_machine=tic4x-unknown
-		os=-coff
-		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	windows32)
-		basic_machine=i386-pc
-		os=-windows32-msvcrt
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
-		basic_machine=sh-unknown
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparc | sparcv9 | sparcv9b)
-		basic_machine=sparc-sun
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto*)
-		os=-nto-qnx
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2 )
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/admin/configure.in.bot.end b/admin/configure.in.bot.end
deleted file mode 100644
index fb483b6..0000000
--- a/admin/configure.in.bot.end
+++ /dev/null
@@ -1,12 +0,0 @@
-if test "$all_tests" = "bad"; then
-  if test ! "$cache_file" = "/dev/null"; then
-    echo ""    
-    echo "Please remove the file $cache_file after changing your setup"
-    echo "so that configure will find the changes next time."
-    echo ""
-  fi
-else
-  echo ""
-  echo "Good - your configure finished. Start make now"
-  echo ""
-fi
diff --git a/admin/configure.in.min b/admin/configure.in.min
deleted file mode 100644
index 7c7e25a..0000000
--- a/admin/configure.in.min
+++ /dev/null
@@ -1,57 +0,0 @@
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
- 
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
- 
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
- 
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-dnl    Boston, MA 02111-1307, USA.
-
-# Original Author was Kalle@kde.org
-# I lifted it in some mater. (Stephan Kulow)
-# I used much code from Janos Farkas
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_INIT(acinclude.m4) dnl a source file from your sub dir
-
-dnl This is so we can use kde-common
-AC_CONFIG_AUX_DIR(admin)
-
-dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
-unset CDPATH
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_SYSTEM 
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-dnl Automake doc recommends to do this only here. (Janos)
-AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs
-
-KDE_SET_PREFIX
-
-dnl generate the config header
-AM_CONFIG_HEADER(config.h) dnl at the distribution this done
-
-dnl Checks for programs.
-AC_CHECK_COMPILERS
-AC_ENABLE_SHARED(yes)
-AC_ENABLE_STATIC(no)
-KDE_PROG_LIBTOOL
-
-dnl for NLS support. Call them in this order!
-dnl WITH_NLS is for the po files
-AM_KDE_WITH_NLS
-
-dnl KDE_USE_QT
-AC_PATH_KDE
diff --git a/admin/cvs-clean.pl b/admin/cvs-clean.pl
deleted file mode 100644
index 669dbdc..0000000
--- a/admin/cvs-clean.pl
+++ /dev/null
@@ -1,87 +0,0 @@
-#! /usr/bin/perl
-
-#
-# This script recursively (beginning with the current directory)
-# wipes out everything not registered in CVS.
-#
-# written by Oswald Buddenhagen <ossi@kde.org>
-#  inspired by the "old" cvs-clean target from Makefile.common
-#
-# This file is free software in terms of the BSD licence. That means
-# that you can do anything with it except removing this license or
-# the above copyright notice. There is NO WARRANTY of any kind.
-#
-
-sub rmrf()
-{
-  my $fn = shift;
-  lstat ($fn);
-  if (-d _) {
-    if (opendir (DIR, $fn)) {
-      for my $efn (grep (!/^\.\.?$/, readdir (DIR))) {
-	&rmrf ($fn."/".$efn);
-      }
-      closedir (DIR);
-      rmdir ($fn);
-    }
-  } else {
-    unlink ($fn);
-  }
-}
-
-sub newfiles()
-{
-  my ($indir, $incvs) = @_;
-  for my $n (keys (%$incvs)) { delete $$indir{$n} }
-  return sort (keys (%$indir));
-}
-
-sub cvsclean()
-{
-  my $dir = shift;
-  my (%dirsdir, %filesdir, %dirscvs, %filescvs);
-  my $dnam = $dir ? $dir : ".";
-  if (!opendir (DIR, $dnam)) {
-    print STDERR "Cannot enter \"".$dnam."\".\n";
-    return;
-  }
-  for my $fn (grep (!/^\.\.?$/, readdir (DIR))) {
-    if (-d $dir.$fn) {
-      $fn eq "CVS" or $dirsdir{$fn} = 1;
-    } else {
-      $filesdir{$fn} = 1;
-    }
-  }
-  closedir (DIR);
-  if (!open (FILE, "<".$dir."CVS/Entries")) {
-    print STDERR "No CVS information in \"".$dnam."\".\n";
-    return;
-  }
-  while (<FILE>) {
-    m%^D/([^/]+)/.*$% and $dirscvs{$1} = 1;
-    m%^/([^/]+)/.*$% and $filescvs{$1} = 1;
-  }
-  close (FILE);
-  if (open (FILE, "<".$dir."CVS/Entries.Log")) {
-    while (<FILE>) {
-      m%^A D/([^/]+)/.*$% and $dirscvs{$1} = 1;
-      m%^A /([^/]+)/.*$% and $filescvs{$1} = 1;
-      m%^R D/([^/]+)/.*$% and delete $dirscvs{$1};
-      m%^R /([^/]+)/.*$% and delete $filescvs{$1};
-    }
-    close (FILE);
-  }
-  for my $fn (&newfiles (\%filesdir, \%filescvs)) {
-    print ("F ".$dir.$fn."\n");
-    &rmrf ($dir.$fn);
-  }
-  for my $fn (&newfiles (\%dirsdir, \%dirscvs)) {
-    print ("D ".$dir.$fn."\n");
-    &rmrf ($dir.$fn);
-  }
-  for my $fn (sort (keys (%dirscvs))) {
-    &cvsclean ($dir.$fn."/");
-  }
-}
-
-&cvsclean ("");
diff --git a/admin/cvs.sh b/admin/cvs.sh
deleted file mode 100644
index 173eca7..0000000
--- a/admin/cvs.sh
+++ /dev/null
@@ -1,594 +0,0 @@
-#! /bin/sh
-#
-# cvs.sh
-#
-# This file contains support code from Makefile.common
-# It defines a shell function for each known target
-# and then does a case to call the correct function.
-
-call_and_fix_autoconf()
-{
-  $AUTOCONF || exit 1
-  if test -r configure.in.in ; then
-    perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\
-    \\n  perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\
-    \\\\\\n    || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\
-    \\n  rm -f \\\$CONFIG_STATUS.bak\\nfi\
-    \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/;" configure
-  fi
-}
-
-strip_makefile()
-{
-  if test -f $makefile_wo; then :; else
-    perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo
-  fi
-}
-
-check_autotool_versions()
-{
-AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1`
-case $AUTOCONF_VERSION in
-  Autoconf*2.5* | autoconf*2.5* ) : ;;
-  "" )
-    echo "*** AUTOCONF NOT FOUND!."
-    echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"
-    exit 1
-    ;;
-  * )
-    echo "*** YOU'RE USING $AUTOCONF_VERSION."
-    echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"
-    exit 1
-    ;;
-esac
- 
-AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1`
-case $AUTOHEADER_VERSION in
-  Autoconf*2.5* | autoheader*2.5* ) : ;;
-  "" )
-    echo "*** AUTOHEADER NOT FOUND!."
-    echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"
-    exit 1
-    ;;
-  * )
-    echo "*** YOU'RE USING $AUTOHEADER_VERSION."
-    echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"
-    exit 1
-    ;;
-esac
-
-AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1`
-case $AUTOMAKE_STRING in
-  automake*1.5d* | automake*1.5* | automake*1.5-* )
-    echo "*** YOU'RE USING $AUTOMAKE_STRING."
-    echo "*** KDE requires automake 1.6.1 or newer"
-    exit 1
-    ;;
-  automake*1.6.* | automake*1.7* ) : ;;
-  "" )
-    echo "*** AUTOMAKE NOT FOUND!."
-    echo "*** KDE requires automake 1.6.1 or newer"
-    exit 1
-    ;;
-  unsermake* ) :
-    echo "*** YOU'RE USING UNSERMAKE."
-    echo "*** GOOD LUCK!! :)"
-    ;;
-  * )
-    echo "*** YOU'RE USING $AUTOMAKE_STRING."
-    echo "*** KDE requires automake 1.6"
-    exit 1
-    ;;
-esac
-}
-
-cvs()
-{
-check_autotool_versions
- 
-### Produce acinclude.m4
-if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
-  echo "*** Creating acinclude.m4"
-  rm -f acinclude.m4 configure.files
-  
-  strip_makefile
-  $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4
-fi
-
-### Make new subdirs and configure.in.
-### The make calls could be optimized away here,
-### with a little thought.
-if test -r configure.in.in; then
-    rm -f configure.in
-    echo "*** Creating list of subdirectories"
-    create_subdirs
-
-    if test -r Makefile.am.in; then
-        echo "*** Creating Makefile.am"
-        if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then 
-            strip_makefile
-            $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1
-        else
-            Makefile_am
-        fi
-     fi
-     echo "*** Creating configure.in"
-     configure_files
-     strip_makefile
-     $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1
-fi
-
-echo "*** Creating aclocal.m4"
-$ACLOCAL || exit 1
-echo "*** Creating configure"
-call_and_fix_autoconf
-
-if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
-  echo "*** Creating config.h template"
-  $AUTOHEADER || exit 1
-fi
-
-echo "*** Creating Makefile templates"
-$AUTOMAKE || exit 1
-if test -z "$UNSERMAKE"; then
-  echo "*** Postprocessing Makefile templates"
-  perl -w admin/am_edit || exit 1
-fi
-
-if egrep "^cvs-local:" $makefile_am >/dev/null; then \
-  strip_makefile
-  $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1
-fi
-
-echo "*** Creating date/time stamp"
-touch stamp-h.in
-
-echo "*** Finished"
-echo "    Don't forget to run ./configure"
-echo "    If you haven't done so in a while, run ./configure --help"
-}
-
-dist()
-{
-check_autotool_versions
-
-###
-### First build all of the files necessary to do just "make"
-###
-if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
-  strip_makefile
-  $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4
-fi
-if test -r configure.in.in; then
-  create_subdirs
-  Makefile_am
-  configure_files
-  strip_makefile
-  $MAKE -f $makefile_wo top_srcdir=. ./configure.in
-fi
-$ACLOCAL
-$AUTOHEADER
-$AUTOMAKE --foreign --include-deps
-perl -w admin/am_edit
-call_and_fix_autoconf
-touch stamp-h.in
-if grep "^cvs-local:" $makefile_am >/dev/null; then
-  strip_makefile
-  $MAKE -f $makefile_wo cvs-local top_srcdir=.
-fi
-
-###
-### Then make messages
-###
-if test -d po; then
- LIST=`find ./po -name "*.po"`
- for i in $LIST; do
-  file2=`echo $i | sed -e "s#\.po#\.gmo#"`
-  msgfmt -o $file2 $i || touch $file2
- done
-fi
-if grep "^cvs-dist-local:" $makefile_am >/dev/null; then
-  strip_makefile
-  $MAKE -f $makefile_wo cvs-dist-local top_srcdir=.
-fi
-}
-
-subdir_dist()
-{
-$ACLOCAL
-$AUTOHEADER
-$AUTOMAKE
-perl -w ../admin/am_edit
-call_and_fix_autoconf
-touch stamp-h.in
-}
-
-configure_in()
-{
-rm -f configure.in configure.in.new
-kde_use_qt_param=
-test -f configure.files || { echo "need configure.files for configure.in"; exit 1; }
-cat `fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` > configure.in.new
-echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new
-if test -f Makefile.am.in; then
-  subdirs=`cat subdirs`
-  for dir in $subdirs; do
-    dir=`echo $dir | sed -e "s,[-+.],_,g"`
-    echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new
-  done
-fi
-
-echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new
-if test -n "$UNSERMAKE"; then
-  echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new
-  echo "AC_CONFIG_FILES([ Makefile.calls ])" >> configure.in.new
-fi
-
-if test -f inst-apps; then
-    topleveldirs=`cat inst-apps`
-else
-    topleveldirs=
-    for dir in `ls -1d * | sort`; do
-	if test "$dir" != "debian" && test -d $dir; then
-	    topleveldirs="$topleveldirs $dir"
-	fi
-    done
-fi
-
-for topleveldir in $topleveldirs; do 
-  if test -f $topleveldir/configure.in; then
-	continue
-  fi
-  if test -f $topleveldir/Makefile.am; then :; else
-	continue
-  fi
-
-  mfs=`find $topleveldir -name Makefile.am -print | fgrep -v "/." | \
-       sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'`
-  for i in $mfs; do
-     echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new
-     if test -n "$UNSERMAKE"; then
-        echo "AC_CONFIG_FILES([ $i.rules ])" >> configure.in.new
-	echo "AC_CONFIG_FILES([ $i.calls ])" >> configure.in.new
-     fi
-  done
-done
-
-files=`cat configure.files`
-list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"`
-for file in $list; do 
-    echo "AC_CONFIG_FILES([ $file ])" >>  configure.in.new
-done
-
-if test -n "$UNSERMAKE"; then
-  echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new
-fi
-
-midfiles=`cat configure.files | fgrep "configure.in.mid"`
-test -n "$midfiles" && cat $midfiles >> configure.in.new
-
-echo "AC_OUTPUT" >> configure.in.new
-modulename=
-if test -f configure.in.in; then
-   if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then
-      kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"`
-   fi
-   if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then
-      line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in`
-      if test -n "$line"; then
-	  modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"`
-	  VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"`
-      fi
-      sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \
-          configure.in.new > configure.in && mv configure.in configure.in.new
-   fi
-fi
-if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then
-     VERSION="\"3.1.0\""
-fi
-if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then
-   modulename=`pwd`; 
-   modulename=`basename $modulename`
-   esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"`
-   modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"`   
-
-fi
-if test -n "$kde_use_qt_param"; then
-      sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \
-      	configure.in.new > configure.in && mv configure.in configure.in.new
-fi
-sed -e "s#@MODULENAME@#$modulename#" configure.in.new |
-	sed -e "s#@VERSION@#$VERSION#" > configure.in
-botfiles=`cat configure.files | egrep "configure.in.bot"`
-test -n "$botfiles" && cat $botfiles >> configure.in
-cat $admindir/configure.in.bot.end >> configure.in
-rm -f configure.in.new
-}
-
-configure_files()
-{
-admindir=NO
-for i in . .. ../.. ../../..; do
-  if test -x $i/admin; then admindir=$i/admin; break; fi
-done
-rm -f configure.files
-touch configure.files
-if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then
-	echo $admindir/configure.in.min >> configure.files
-fi
-test -f configure.in.in && echo configure.in.in >> configure.files
-# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs
-if test -f inst-apps; then
-   inst=`cat inst-apps`
-   list=""
-   for i in $inst; do
-      list="$list `find $i/ -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \
-		sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`"
-   done
-else
-   list=`find . -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \
-		sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`
-fi
-for i in $list; do if test -f $i && test `dirname $i` != "." ; then
-  echo $i >> configure.files
-fi; done
-test -f configure.in.mid && echo configure.in.mid >> configure.files
-test -f configure.in.bot && echo configure.in.bot >> configure.files
-}
-
-create_subdirs()
-{
-if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then 
-    # as many modules contain rules to create subdirs without any
-    # dependencies make won't create it unless there is no file.
-    # so we check if that's a dummy rule or one that works
-    rm -f subdirs.cvs.sh.$$
-    if test -f subdirs; then
-	mv subdirs subdirs.cvs.sh.$$
-    fi
-    strip_makefile
-    $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1
-    if test -f subdirs.cvs.sh.$$; then
-	if test -s subdirs; then
-	    rm subdirs.cvs.sh.$$ 
-	else
-	    mv subdirs.cvs.sh.$$ subdirs
-	fi
-    fi
-else
-    subdirs
-fi
-}
-
-subdirs()
-{
-dirs=
-idirs=
-if test -f inst-apps; then
-   idirs=`cat inst-apps`
-else
-   idirs=`ls -1 | sort`
-fi
-
-compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1`
-compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1`
-for i in $idirs; do
-    if test -f $i/Makefile.am; then
-       case " $compilefirst $compilelast " in
-         *" $i "*) ;;
-         *) dirs="$dirs $i"
-       esac
-    fi
-done
-
-: > ./_SUBDIRS
-
-for d in $compilefirst; do
-   echo $d >> ./_SUBDIRS
-done
-
-(for d in $dirs; do 
-   list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1`
-   for s in $list; do
-      echo $s $d
-   done
-   list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1`
-   for s in $list; do
-      echo $d $s
-   done
-   echo $d $d
-done ) | tsort >> ./_SUBDIRS
-
-for d in $compilelast; do
-   echo $d >> ./_SUBDIRS
-done
-
-if test -r subdirs && cmp -s subdirs _SUBDIRS; then
-    rm -f _SUBDIRS
-fi
-test -r _SUBDIRS && mv _SUBDIRS subdirs || true
-}
-
-Makefile_am()
-{
-if test -f Makefile.am.in; then
-  compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1`
-  compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1`
-
-  idirs=
-  dirs=
-  if test -f inst-apps; then
-     idirs=`cat inst-apps`
-  else
-     idirs=`cat subdirs`
-  fi
-  for i in $idirs; do
-    case " $compilefirst $compilelast " in
-      *" $i "*) ;;
-      *) dirs="$dirs $i"
-    esac
-  done
-
-  if test -n "$UNSERMAKE"; then
-    cp Makefile.am.in Makefile.am
-    topsubdirs=
-    for i in $compilefirst $dirs $compilelast; do
-       vari=`echo $i | sed -e "s,[-+],_,g"`
-       echo "if $vari""_SUBDIR_included" >> Makefile.am
-       echo "$vari""_SUBDIR=$i" >> Makefile.am
-       echo "endif" >> Makefile.am
-       topsubdirs="$topsubdirs \$($vari""_SUBDIR)"
-    done
-    echo "SUBDIRS=$topsubdirs" >> Makefile.am
-  else
-    cat Makefile.am.in | \
-        sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \
-        sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am
-    echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am
-  fi
-fi
-}
-
-cvs_clean()
-{
-if test -d CVS; then :; else
-  echo "You don't have a toplevel CVS directory."
-  echo "You most certainly didn't use cvs to get these sources."
-  echo "But this function depends on cvs's information."
-  exit 1
-fi
-perl $admindir/cvs-clean.pl
-}
-
-package_merge()
-{
-catalogs=$POFILES
-for cat in $catalogs; do
-  msgmerge -o $cat.new $cat $PACKAGE.pot
-  if test -s $cat.new; then
-    grep -v "\"POT-Creation" $cat.new > $cat.new.2
-    grep -v "\"POT-Creation" $cat >> $cat.new.1
-    if diff $cat.new.1 $cat.new.2; then
-	rm $cat.new
-    else
-	mv $cat.new $cat
-    fi
-    rm -f $cat.new.1 $cat.new.2
-  fi
-done
-}
-
-package_messages()
-{
-rm -rf po.backup
-mkdir po.backup
-
-for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
-  egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i
-  cp po/$i po.backup/backup_$i
-  touch -r po/$i po.backup/backup_$i
-  rm po/$i
-done
-
-podir=${podir:-$PWD/po}
-files=`find . -name Makefile.am | xargs egrep -l '^messages:' `
-dirs=`for i in $files; do echo \`dirname $i\`; done`
-tmpname="$PWD/messages.log"
-if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi
-if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi
-export EXTRACTRC PREPARETIPS
-
-for subdir in $dirs; do
-  test -z "$VERBOSE" || echo "Making messages in $subdir"
-  (cd $subdir
-   if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then
-	$EXTRACTRC *.rc *.ui > rc.cpp
-   else
-	candidates=`ls -1 *.rc *.ui 2>/dev/null`
-	if test -n "$candidates"; then
-	    echo "$subdir has *.rc or *.ui files, but not correct messages line"
-	fi
-   fi
-   if test -n "`grep -r TDEAboutData *.c* *.C* 2>/dev/null`"; then
-	echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp
-   else echo " " > _translatorinfo.cpp
-   fi
-   perl -e '$mes=0; while (<STDIN>) { next if (/^(if|else|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile
-
-   $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \
-	XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-${TDEDIR:-/usr/local/kde}/include}/kde.pot" \
-	messages 
-   exit_code=$?
-   if test "$exit_code" != 0; then
-       echo "make exit code: $exit_code"
-   fi
-   ) 2>&1 | grep -v '^make\[1\]' > $tmpname
-   test -s $tmpname && { echo $subdir ; cat "$tmpname"; }
-   test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp
-   rm -f $subdir/_translatorinfo.cpp
-   rm -f $subdir/_transMakefile
-done
-rm -f $tmpname
-for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do
-  test -f po/$i || echo "disappeared: $i"
-done
-for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
-   msgmerge -q -o po/$i po/$i po/$i
-   egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot
-  if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then
-	echo "will update $i"
-	msgmerge -q po.backup/backup_$i po/$i > temp.pot
-	mv temp.pot po/$i
-  else
-    if test -f po.backup/backup_$i; then
-      test -z "$VERBOSE" || echo "I'm restoring $i"
-      mv po.backup/backup_$i po/$i
-      rm po.backup/$i
-    else
-      echo "will add $i"
-    fi
-  fi
-done
-rm -f temp.pot
-rm -rf po.backup
-}
-
-unset CDPATH
-admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'`
-test "x$admindir" = "x$0" && admindir=.
-
-test "x$MAKE" = x && MAKE=make
-makefile_am=Makefile.am
-makefile_wo=Makefile.am
-if test -f Makefile.am.in; then
-  makefile_am=Makefile.am.in
-  makefile_wo=Makefile.am.in.wo
-fi
-
-# Suck in the AUTOCONF detection code
-. $admindir/detect-autoconf.sh
-
-###
-### Main
-###
-
-arg=`echo $1 | tr '\-.' __`
-case $arg in
-  cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \
-  cvs_clean | package_merge | package_messages | Makefile_am ) $arg ;;
-  configure ) call_and_fix_autoconf ;;
-  * ) echo "Usage: cvs.sh <target>"
-      echo "Target can be one of:"
-      echo "    cvs cvs-clean dist"
-      echo "    configure.in configure.files"
-      echo "    package-merge package-messages"
-      echo ""
-      echo "Usage: anything but $1"
-      exit 1 ;;
-esac
-
-if test -f Makefile.am.in.wo; then
-  rm Makefile.am.in.wo
-fi
-
-exit 0
diff --git a/admin/debianrules b/admin/debianrules
deleted file mode 100755
index 8143640..0000000
--- a/admin/debianrules
+++ /dev/null
@@ -1,119 +0,0 @@
-#!/usr/bin/perl -w
-
-use Shell qw(mv cp mkdir rm) ;
-use File::Find;
-use Cwd;
-
-$origPwd = `pwd`;
-chomp $origPwd;
-
-$kde_confdir		=	"/etc/kde3";
-$kde_prefix		=	"/usr";
-$kde_bindir		=	"$kde_prefix/bin";
-$kde_includedir		=	"$kde_prefix/include/tde";
-$kde_libdir		=	"$kde_prefix/lib";
-$kde_cgidir		=	"$kde_prefix/lib/cgi-bin";
-$kde_moduledir		=	"$kde_prefix/lib/kde3";
-$kde_appsdir		=	"$kde_prefix/share/applnk";
-$kde_datadir		=	"$kde_prefix/share/apps";
-$kde_htmldir		=	"$kde_prefix/share/doc/kde/HTML";
-$kde_icondir		=	"$kde_prefix/share/icons";
-$kde_locale		=	"$kde_prefix/share/locale";
-$kde_mimedir		=	"$kde_prefix/share/mimelnk";
-$kde_servicesdir	=	"$kde_prefix/share/services";
-$kde_servicetypesdir	=	"$kde_prefix/share/servicetypes";
-$kde_sounddir		=	"$kde_prefix/share/sounds";
-$kde_templatesdir	=	"$kde_prefix/share/templates";
-$kde_wallpaperdir	=	"$kde_prefix/share/wallpapers";
-
-$mandir			=	"$kde_prefix/share/man";
-$infodir		=	"$kde_prefix/share/info";
-$sysconfdir		=	"/etc";
-
-$QTDIR			=	"/usr/share/qt3";
-$IDL			=	"$kde_bindir/cuteidl";
-$DCOPIDL		=	"$kde_bindir/dcopidl";
-$DCOPIDL2CPP		=	"$kde_bindir/dcopidl2cpp";
-$KDB2HTML		=	"$kde_bindir/kdb2html";
-$MCOPIDL		=	"$kde_bindir/mcopidl";
-$ARTSCCONFIG		=	"$kde_bindir/artsc-config";
-
-if (defined $ENV{DEB_BUILD_OPTIONS} &&
-    $ENV{DEB_BUILD_OPTIONS} =~ /\bdebug\b/) {
-  $enable_debug="--enable-debug";
-  $enable_final="";
-}
-else {
-  $enable_debug="--disable-debug";
-  if (defined $ENV{DEB_BUILD_OPTIONS} &&
-              $ENV{DEB_BUILD_OPTIONS} =~ /\bnofinal\b/) {
-	  $enable_final="";
-  } else {
-	  $enable_final="--enable-final";
-  }
-}
-
-if (@ARGV && $ARGV[0] eq 'echodirs') {
-  print STDOUT "export kde_confdir=$kde_confdir\n";
-  print STDOUT "export kde_prefix=$kde_prefix\n";
-  print STDOUT "export kde_bindir=$kde_bindir\n";
-  print STDOUT "export kde_includedir=$kde_includedir\n";
-  print STDOUT "export kde_libdir=$kde_libdir\n";
-  print STDOUT "export kde_cgidir=$kde_cgidir\n";
-  print STDOUT "export kde_moduledir=$kde_moduledir\n";
-  print STDOUT "export kde_appsdir=$kde_appsdir\n";
-  print STDOUT "export kde_datadir=$kde_datadir\n";
-  print STDOUT "export kde_htmldir=$kde_htmldir\n";
-  print STDOUT "export kde_icondir=$kde_icondir\n";
-  print STDOUT "export kde_locale=$kde_locale\n";
-  print STDOUT "export kde_mimedir=$kde_mimedir\n";
-  print STDOUT "export kde_servicesdir=$kde_servicesdir\n";
-  print STDOUT "export kde_servicetypesdir=$kde_servicetypesdir\n";
-  print STDOUT "export kde_sounddir=$kde_sounddir\n";
-  print STDOUT "export kde_templatesdir=$kde_templatesdir\n";
-  print STDOUT "export kde_wallpaperdir=$kde_wallpaperdir\n";
-
-  print STDOUT "export mandir=$mandir\n";
-  print STDOUT "export infodir=$infodir\n";
-  print STDOUT "export sysconfdir=$sysconfdir\n";
-
-  print STDOUT "export QTDIR=$QTDIR\n";
-  print STDOUT "export IDL=$IDL\n";
-  print STDOUT "export DCOPIDL=$DCOPIDL\n";
-  print STDOUT "export DCOPIDL2CPP=$DCOPIDL2CPP\n";
-  print STDOUT "export KDB2HTML=$KDB2HTML\n";
-  print STDOUT "export MCOPIDL=$MCOPIDL\n";
-  print STDOUT "export ARTSCCONFIG=$ARTSCCONFIG\n";
-  print STDOUT "export INSTALL_DATA=install -p -c -m 644\n";
-
-  print STDOUT "configkde=$enable_debug $enable_final --disable-rpath --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --sysconfdir=\$(sysconfdir) --libdir=\$(kde_libdir) --includedir=\$(kde_includedir) --with-qt-includes=/usr/include/qt3 --mandir=\$(mandir) --infodir=\$(infodir) --with-xinerama\n";
-  print STDOUT "configkdevelop=$enable_debug $enable_final --disable-rpath --enable-docbase --enable-kdoc2 --libdir=\$(kde_libdir) --includedir=\$(kde_includedir) --with-qt-includes=/usr/include/qt3 --mandir=\$(mandir) --with-tdelibsdoc-dir=/usr/share/doc/tdelibs3-doc/html --with-xinerama\n";
-  print STDOUT "configkdepim=$enable_debug $enable_final --disable-rpath --with-extra-includes=/usr/include/libpisock --enable-shared --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --with-qt-includes=/usr/include/qt3 --mandir=\$(mandir) --infodir=\$(infodir) --with-xinerama\n";
-
-  exit
-}
-
-if (@ARGV && $ARGV[0] eq 'echoglobals') {
-	print STDOUT "[Directories]\n";
-	print STDOUT "dir_config=$kde_confdir\n";
-	print STDOUT "dir_tmp=/tmp\n";
-	print STDOUT "dir_socket=/tmp\n";
-	print STDOUT "dir_exe=$kde_bindir\n";
-	print STDOUT "dir_lib=$kde_libdir\n";
-	print STDOUT "dir_cgi=$kde_cgidir\n";
-	print STDOUT "dir_module=$kde_moduledir\n";
-	print STDOUT "dir_apps=$kde_appsdir\n";
-	print STDOUT "dir_data=$kde_datadir\n";
-	print STDOUT "dir_html=$kde_htmldir\n";
-	print STDOUT "dir_icon=$kde_icondir\n";
-	print STDOUT "dir_locale=$kde_locale\n";
-	print STDOUT "dir_mime=$kde_mimedir\n";
-	print STDOUT "dir_services=$kde_servicesdir\n";
-	print STDOUT "dir_servicetypes=$kde_servicetypesdir\n";
-	print STDOUT "dir_sound=$kde_sounddir\n";
-	print STDOUT "dir_templates=$kde_templatesdir\n";
-	print STDOUT "dir_wallpaper=$kde_wallpaperdir\n";
-	print STDOUT "[General]\n";
-	print STDOUT "TerminalApplication=x-terminal-emulator\n";
-	exit
-}
diff --git a/admin/depcomp b/admin/depcomp
deleted file mode 100755
index 4c20c6c..0000000
--- a/admin/depcomp
+++ /dev/null
@@ -1,441 +0,0 @@
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  This file always lives in the current directory.
-  # Also, the AIX compiler puts `$object:' at the start of each line;
-  # $object doesn't have directory information.
-  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  outname="$stripped.o"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Must come before tru64.
-
-  # Intel's C compiler understands `-MD -MF file'.  However
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-tru64)
-   # The Tru64 AIX compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put 
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-
-   tmpdepfile1="$object.d"
-   tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` 
-   if test "$libtool" = yes; then
-      "$@" -Wc,-MD
-   else
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2"
-      exit $stat
-   fi
-
-   if test -f "$tmpdepfile1"; then
-      tmpdepfile="$tmpdepfile1"
-   else
-      tmpdepfile="$tmpdepfile2"
-   fi
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a space and a tab in the [].
-      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  test -z "$dashmflag" && dashmflag=-M
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*) # this is libtool, let us make it quiet
-      for arg
-      do # cycle over the arguments
-        case "$arg" in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
-      ;;
-    esac
-    "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  # X makedepend
-  (
-    shift
-    cleared=no
-    for arg in "$@"; do
-      case $cleared in no)
-        set ""; shift
-	cleared=yes
-      esac
-      case "$arg" in
-        -D*|-I*)
-	  set fnord "$@" "$arg"; shift;;
-	-*)
-	  ;;
-	*)
-	  set fnord "$@" "$arg"; shift;;
-      esac
-    done
-    obj_suffix="`echo $object | sed 's/^.*\././'`"
-    touch "$tmpdepfile"
-    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tail +3 "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*)
-      for arg
-      do # cycle over the arguments
-        case $arg in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
-      ;;
-    esac
-    "$@" -E |
-    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*)
-      for arg
-      do # cycle over the arguments
-        case $arg in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
-      ;;
-    esac
-    "$@" -E |
-    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
diff --git a/admin/detect-autoconf.sh b/admin/detect-autoconf.sh
deleted file mode 100644
index 20904e4..0000000
--- a/admin/detect-autoconf.sh
+++ /dev/null
@@ -1,81 +0,0 @@
-#! /bin/sh
-
-# Global variables...
-AUTOCONF="autoconf"
-AUTOHEADER="autoheader"
-AUTOM4TE="autom4te"
-AUTOMAKE="automake"
-ACLOCAL="aclocal"
-
-
-# We don't use variable here for remembering the type ... strings.
-# local variables are not that portable, but we fear namespace issues with
-# our includer.  The repeated type calls are not that expensive.
-checkAutoconf()
-{
-  if test -x "`$WHICH autoconf-2.5x`" ; then	
-    AUTOCONF="`$WHICH autoconf-2.5x`"
-  elif test -x "`$WHICH autoconf-2.54`" ; then
-    AUTOCONF="`$WHICH autoconf-2.54`"
-  elif test -x "`$WHICH autoconf-2.53`" ; then
-    AUTOCONF="`$WHICH autoconf-2.53`"
-  elif test -x "`$WHICH autoconf-2.53a`" ; then
-    AUTOCONF="`$WHICH autoconf-2.53a`"
-  elif test -x "`$WHICH autoconf-2.52`" ; then
-    AUTOCONF="`$WHICH autoconf-2.52`"
-  elif test -x "`$WHICH autoconf2.50`" ; then
-    AUTOCONF="`$WHICH autoconf2.50`"
-  fi
-}
-
-checkAutoheader()
-{
-  if test -x "`$WHICH autoheader-2.5x`" ; then
-    AUTOHEADER="`$WHICH autoheader-2.5x`"
-    AUTOM4TE="`$WHICH autom4te-2.5x`"
-  elif test -x "`$WHICH autoheader-2.54`" ; then
-    AUTOHEADER="`$WHICH autoheader-2.54`"
-    AUTOM4TE="`$WHICH autom4te-2.54`"
-  elif test -x "`$WHICH autoheader-2.53`" ; then
-    AUTOHEADER="`$WHICH autoheader-2.53`"
-    AUTOM4TE="`$WHICH autom4te-2.53`"
-  elif test -x "`$WHICH autoheader-2.53a`" ; then
-    AUTOHEADER="`$WHICH autoheader-2.53a`"
-    AUTOM4TE="`$WHICH autom4te-2.53a`"
-  elif test -x "`$WHICH autoheader-2.52`" ; then
-    AUTOHEADER="`$WHICH autoheader-2.52`"
-  elif test -x "`$WHICH autoheader2.50`" ; then
-    AUTOHEADER="`$WHICH autoheader2.50`"
-  fi
-}
-
-checkAutomakeAclocal ()
-{
-  if test -z "$UNSERMAKE"; then
-    if test -x "`$WHICH automake-1.6`" ; then
-      AUTOMAKE="`$WHICH automake-1.6`"
-      ACLOCAL="`$WHICH aclocal-1.6`"
-    elif test -x "`$WHICH automake-1.7`" ; then
-      AUTOMAKE="`$WHICH automake-1.7`"
-      ACLOCAL="`$WHICH aclocal-1.7`"
-    fi
-  else
-     AUTOMAKE="$UNSERMAKE"
-  fi
-}
-
-checkWhich ()
-{
-  WHICH=""
-  for i in "type -p" "which" "type" ; do
-    T=`$i sh 2> /dev/null`
-    test -x "$T" && WHICH="$i" && break
-  done
-}
-
-checkWhich
-checkAutoconf
-checkAutoheader
-checkAutomakeAclocal
-
-export WHICH AUTOHEADER AUTOCONF AUTOM4TE AUTOMAKE ACLOCAL
diff --git a/admin/install-sh b/admin/install-sh
deleted file mode 100755
index 11870f1..0000000
--- a/admin/install-sh
+++ /dev/null
@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	:
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		:
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		:
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		:
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/admin/libtool.m4.in b/admin/libtool.m4.in
deleted file mode 100644
index 15709d0..0000000
--- a/admin/libtool.m4.in
+++ /dev/null
@@ -1,5427 +0,0 @@
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-## Copyright 1996, 1997, 1998, 1999, 2000, 2001
-## Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 47 AC_PROG_LIBTOOL
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="[$]2"
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[ifdef([AC_DIVERSION_NOTICE],
-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-[$]*
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-AC_DIVERT_POP
-])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-linux*)
-  # Test if the compiler is 64bit
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *"ELF 32"*)
-      LINUX_64_MODE="32"
-      ;;
-    *"ELF 64"*)
-      LINUX_64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-  
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   save_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS $3"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-   CFLAGS="$save_CFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
-else
-    ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
-else
-    ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  testring="ABCD"
-
-  case $host_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-	       = "XX$testring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$testring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      testring=$testring$testring
-    done
-    testring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}]
-EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_unknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# -------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   ifelse([$1],[],[save_CFLAGS="$CFLAGS"
-		   CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"],
-	  [$1],[CXX],[save_CXXFLAGS="$CXXFLAGS"
-		   CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"],
-	  [$1],[GCJ],[save_GCJFLAGS="$GCJFLAGS"
-		   GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
-
-   if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s out/conftest.err; then
-       # Append any errors to the config.log.
-       cat out/conftest.err 1>&AS_MESSAGE_LOG_FD
-     else
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   ifelse([$1],[],[CFLAGS="$save_CFLAGS"],
-	  [$1],[CXX],[CXXFLAGS="$save_CXXFLAGS"],
-	  [$1],[GCJ],[GCJFLAGS="$save_GCJFLAGS"])
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var $1)"; then
-
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-  AC_MSG_RESULT([no])
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"`
-    if echo "$sys_lib_search_path_spec" | [egrep ';[C-Z]:/' >/dev/null]; then
-      # It is most probably a Windows format PATH printed by
-      # mingw gcc, but we are running on Cygwin. Gcc prints its search
-      # path with ; separators, and with drive letters. We can handle the
-      # drive letters (cygwin fileutils understands them), so leave them,
-      # especially as we might pass files found there to a mingw objdump,
-      # which wouldn't understand a cygwinified path. Ahh.
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'`
-    else
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed  -e "s/$PATH_SEPARATOR/ /g"`
-    fi
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  *) # from 3.2 on
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test "$host_cpu" = ia64; then
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    soname_spec='${libname}${release}.so$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-  else
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-    soname_spec='${libname}${release}.sl$major'
-  fi
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)          version_type=irix ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  libsuff=
-  if test "x$LINUX_64_MODE" = x64; then
-    # Some platforms are per default 64-bit, so there's no /lib64
-    if test -d /lib64; then
-      libsuff=64
-    fi
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags=TAGS],
-	[include additional configurations @<:@CXX,GCJ@:>@])],
-    [tagnames="$withval"],
-    [tagnames="CXX,GCJ"
-    case $host_os in
-      mingw*|cygwin*) tagnames="$tagnames,RC" ;;
-    esac])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	AC_LIBTOOL_LANG_CXX_CONFIG
-	;;
-
-      GCJ)
-	AC_LIBTOOL_LANG_GCJ_CONFIG
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      available_tags="$available_tags $tagname"
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-#- set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* | pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[[012]])
-    lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  if test "$host_cpu" = ia64; then
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-  else
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  fi
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-  irix5* | nonstopux*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh* | x86_64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  # the debian people say, arm and glibc 2.3.1 works for them with pass_all
-  arm* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-nto-qnx)
-  lt_cv_deplibs_check_method=unknown
-  ;;
-
-openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-  else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  esac
-  ;;
-
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ("$tmp_nm" -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ("$tmp_nm" -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided and an installed libltdl is not found, it is
-# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-# quotes!).  If your package is not flat and you're not using automake,
-# define top_builddir and top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
-      [],
-      [define([AC_PROVIDE_IFELSE],
-	      [ifdef([AC_PROVIDE_$1],
-		     [$2], [$3])])])
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-])# _LT_AC_LANG_CXX
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# --------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([AC_PROG_RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-#
-# Check for any special shared library compilation flags.
-#
-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-    ;;
-  esac
-fi
-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ 	]]" >/dev/null; then :
-  else
-    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-# Report which librarie types wil actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C test sources.
-ac_ext=cc
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int char *[]) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${CXX-"c++"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if eval "`$CC -print-prog-name=ld` --version 2>&1" | \
-      egrep 'GNU ld' > /dev/null; then
-    with_gnu_ld=yes
-
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	egrep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      # KDE requires run time linking.  Make it the default.
-      aix_use_runtimelinking=yes
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-      esac
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='-qmkshrobj ${wl}-G'
-	else
-	  shared_flag='-qmkshrobj'
-	fi
-      fi
-    fi
-
-    # Let the compiler handle the export list.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	_LT_AC_TAGVAR(always_export_symbols, $1)=yes
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds it's shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  dgux*)
-    case $cc_basename in
-      ec++)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[12]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux*)
-    if test $with_gnu_ld = no; then
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      else
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      fi
-    fi
-    if test "$host_cpu" = ia64; then
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    else
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    fi
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					    # but as the default
-					    # location of the library.
-
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      aCC)
-	case $host_os in
-	hpux9*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	  ;;
-	*)
-	  if test "$host_cpu" = ia64; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  fi
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_os in
-	    hpux9*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	      ;;
-	    *)
-	      if test "$host_cpu" = ia64; then
-		_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	      else
-		_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      fi
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc)
-	# Intel C++
-	with_gnu_ld=yes
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      cxx)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    # NetBSD uses g++ - do we need to do anything?
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sco*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC)
-	# Sun C++ 4.2, 5.x and Centerline C++
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | egrep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-# Figure out "hidden" C++ library dependencies from verbose
-# compiler output whening linking a shared library.
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-
-
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext|*.$libext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out
-else
-  echo "libtool.m4: error: problem compiling C++ test program"
-fi
-
-$rm -f confest.$objext
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ;;
-esac
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for C test sources.
-ac_ext=java
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-set dummy $CC
-compiler="[$]2"
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
-
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "$cfgfile"
-    # This is a source program that is used to create dlls on Windows
-    # Don't remove nor modify the starting and closing comments
-    _LT_AC_FILE_LTDLL_C
-    # This is a source program that is used to create import libraries
-    # on Windows for dlls which lack them. Don't remove nor modify the
-    # starting and closing comments
-    _LT_AC_FILE_IMPGEN_C
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-solaris* | sysv5*)
-  symcode='[[BDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[[ABCDGISTW]]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    cygwin* | mingw* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      fi
-      ;;
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix4* | aix5*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-      dgux*)
-	case $cc_basename in
-	  ec++)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux*)
-	case $cc_basename in
-	  KCC)
-	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  icpc)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  cxx)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC)
-	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx)
-	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      sco*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC)
-	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc)
-	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC)
-	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      unixware*)
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      fi
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-      fi
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    linux*)
-      if test "$CC" = "icc"; then
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-      fi
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      if test "x$host_vendor" = xsni; then
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      fi
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case "$host_os" in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC"
-    ;;
-esac
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix4* | aix5*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  cygwin* | mingw* | pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-],[
-  runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an egrep regular expression of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-
-      extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-	sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-	test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-	if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-	else $CC -o impgen impgen.c ; fi)~
-	$output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-      _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-      # cygwin and mingw dlls have different entry points and sets of symbols
-      # to exclude.
-      # FIXME: what about values for MSVC?
-      dll_entry=__cygwin_dll_entry@12
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-      case $host_os in
-      mingw*)
-	# mingw values
-	dll_entry=_DllMainCRTStartup@12
-	dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-	;;
-      esac
-
-      # mingw and cygwin differ, and it's simplest to just exclude the union
-      # of the two symbol sets.
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-      # recent cygwin and mingw systems supply a stub DllMain which the user
-      # can override, but on older systems we have to supply one (in ltdll.c)
-      if test "x$lt_cv_need_dllmain" = "xyes"; then
-	ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-	ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-  	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-      else
-	ltdll_obj=
-	ltdll_cmds=
-      fi
-
-      # Extract the symbol export list from an `--export-all' def file,
-      # then regenerate the def file from the symbol export list, so that
-      # the compiled dll only exports the symbol export list.
-      # Be careful not to strip the DATA tag left by newer dlltools.
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"'
-	$DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-	sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is.
-      # If DATA tags from a recent dlltool are present, honour them!
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname-def;
-	else
-	  echo EXPORTS > $output_objdir/$soname-def;
-	  _lt_hint=1;
-	  cat $export_symbols | while read symbol; do
-	   set dummy \$symbol;
-	   case \[$]# in
-	     2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	     *) echo "   \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-	   esac;
-	   _lt_hint=`expr 1 + \$_lt_hint`;
-	  done;
-	fi~
-	'"$ltdll_cmds"'
-	$CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-	$CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-	$CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris* | sysv5*)
-      if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-      runpath_var=LD_RUN_PATH
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-      case $host_os in
-      cygwin* | mingw* | pw32*)
-	# dlltool doesn't understand --whole-archive et. al.
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-	;;
-      *)
-	# ancient GNU ld didn't support --whole-archive et. al.
-	if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-	fi
-	;;
-      esac
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	fi
-
-	# KDE requires run time linking.  Make it the default.
-	aix_use_runtimelinking=yes
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	esac
-	shared_flag='-shared'
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-  	if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='-qmkshrobj ${wl}-G'
-	  else
-	    shared_flag='-qmkshrobj'
-  	fi
-	fi
-      fi
-
-      # Let the compiler handle the export list.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    bsdi4*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      ;;
-
-    darwin* | rhapsody*)
-      case "$host_os" in
-      rhapsody* | darwin1.[[012]])
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-	;;
-      esac
-
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-      # We need to add '_' to the symbols in $export_symbols first
-      #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-      ;;
-
-    dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      if test "$GCC" = yes; then
-	case $host_os in
-	  hpux9*)
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    else
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	    fi
-	    ;;
-	esac
-      else
-	case $host_os in
-	  hpux9*)
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-	    else
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-	    fi
-	    ;;
-	esac
-      fi
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=no
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      else
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      fi
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    openbsd*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	   ;;
-	 *)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    sco3.2v5*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-      esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      if test "x$host_vendor" = xsni; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-      fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4.2uw2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
-
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv5*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-#
-# Do we need to explicitly link libc?
-#
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $_LT_AC_TAGVAR(archive_cmds, $1) in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-    $rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-      if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-      then
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      else
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-      fi
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi
-    $rm conftest*
-    AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-    ;;
-  esac
-fi
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_FILE_IMPGEN_C
-# --------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_IMPGEN_C], [
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
-])# _LT_AC_FILE_IMPGEN_C
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-############################################################
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-############################################################
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-
-  # Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
-  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=$TMPDIR/sed$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-   { (exit 1); exit 1; }
-}
-  _max=0
-  _count=0
-  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
-  # along with /bin/sed that truncates output.
-  for _sed in $_sed_list /usr/xpg4/bin/sed; do
-    test ! -f ${_sed} && break
-    cat /dev/null > "$tmp/sed.in"
-    _count=0
-    echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in"
-    # Check for GNU sed and select it if it is found.
-    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
-      lt_cv_path_SED=${_sed}
-      break;
-    fi
-    while true; do
-      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
-      mv "$tmp/sed.tmp" "$tmp/sed.in"
-      cp "$tmp/sed.in" "$tmp/sed.nl"
-      echo >>"$tmp/sed.nl"
-      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
-      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
-      # 10000 chars as input seems more than enough
-      test $_count -gt 10 && break
-      _count=`expr $_count + 1`
-      if test $_count -gt $_max; then
-        _max=$_count
-        lt_cv_path_SED=$_sed
-      fi
-    done
-  done
-  rm -rf "$tmp"
-])
-AC_MSG_RESULT([$SED])
-])
diff --git a/admin/ltmain.sh b/admin/ltmain.sh
deleted file mode 100644
index f2a88ef..0000000
--- a/admin/ltmain.sh
+++ /dev/null
@@ -1,5572 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
-fi
-
-# The name of this program.
-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.4e
-TIMESTAMP=" (1.1090 2002/02/07 19:54:36)"
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-: ${IFS=" 	"}
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  echo "$modename: not configured to build any kind of library" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
-  shift
-
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	echo "$progname: invalid tag name: $tagname" 1>&2
-	exit 1
-	;;
-      esac
-
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
-	else
-	  echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    echo
-    echo "Copyright 1996, 1997, 1998, 1999, 2000, 2001"
-    echo "Free Software Foundation, Inc."
-    echo "This is free software; see the source for copying conditions.  There is NO"
-    echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit 0
-    ;;
-
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
-    done
-    exit 0
-    ;;
-
-  --debug)
-    echo "$progname: enabling shell trace mode"
-    set -x
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
-    else
-      echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
-    else
-      echo "disable static libraries"
-    fi
-    exit 0
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --preserve-dup-deps) duplicate_deps="yes" ;;
-
-  --quiet | --silent)
-    show=:
-    ;;
-
-  --tag) prevopt="--tag" prev=tag ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
-
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-fi
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    case $nonopt in
-    *cc | *++ | gcc* | *-gcc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
-
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
-
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    prev=
-    lastarg=
-    srcfile="$nonopt"
-    suppress_output=
-
-    user_target=no
-    for arg
-    do
-      case $prev in
-      "") ;;
-      xcompiler)
-	# Aesthetically quote the previous argument.
-	prev=
-	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-
-	case $arg in
-	# Double-quote args containing other shell metacharacters.
-	# Many Bourne shells cannot handle close brackets correctly
-	# in scan sets, so we specify it separately.
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-
-	# Add the previous argument to base_compile.
-	if test -z "$base_compile"; then
-	  base_compile="$lastarg"
-	else
-	  base_compile="$base_compile $lastarg"
-	fi
-	continue
-	;;
-      esac
-
-      # Accept any command-line options.
-      case $arg in
-      -o)
-	if test "$user_target" != "no"; then
-	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	  exit 1
-	fi
-	user_target=next
-	;;
-
-      -static)
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-	lastarg=
-	save_ifs="$IFS"; IFS=','
-	for arg in $args; do
-	  IFS="$save_ifs"
-
-	  # Double-quote args containing other shell metacharacters.
-	  # Many Bourne shells cannot handle close brackets correctly
-	  # in scan sets, so we specify it separately.
-	  case $arg in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    arg="\"$arg\""
-	    ;;
-	  esac
-	  lastarg="$lastarg $arg"
-	done
-	IFS="$save_ifs"
-	lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
-	# Add the arguments to base_compile.
-	if test -z "$base_compile"; then
-	  base_compile="$lastarg"
-	else
-	  base_compile="$base_compile $lastarg"
-	fi
-	continue
-	;;
-      esac
-
-      case $user_target in
-      next)
-	# The next one is the -o target name
-	user_target=yes
-	continue
-	;;
-      yes)
-	# We got the output file
-	user_target=set
-	libobj="$arg"
-	continue
-	;;
-      esac
-
-      # Accept the current argument as the source file.
-      lastarg="$srcfile"
-      srcfile="$arg"
-
-      # Aesthetically quote the previous argument.
-
-      # Backslashify any backslashes, double quotes, and dollar signs.
-      # These are the only characters that are still specially
-      # interpreted inside of double-quoted scrings.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      case $lastarg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      # Add the previous argument to base_compile.
-      if test -z "$base_compile"; then
-	base_compile="$lastarg"
-      else
-	base_compile="$base_compile $lastarg"
-      fi
-    done
-
-    case $user_target in
-    set)
-      ;;
-    no)
-      # Get the name of the library object.
-      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-      ;;
-    *)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
-    case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    esac
-
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-    case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-    *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    # Infer tagged configuration to use if any are available and
-    # if one wasn't chosen via the "--tag" command line option.
-    # Only attempt this if the compiler in the base compile
-    # command doesn't match the default compiler.
-    if test -n "$available_tags" && test -z "$tagname"; then
-      case "$base_compile " in
-      "$CC "*) ;;
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when ltconfig was run.
-      "`$echo $CC` "*) ;;
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
-	    case "$base_compile " in
-	    "$CC "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    "`$echo $CC` "*)
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  echo "$modename: unable to infer tagged configuration"
-	  echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit 1
-#        else
-#          echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
-    lobj=${xdir}$objdir/$objname
-
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit 1" 1 2 15
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit 1" 1 2 15
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $run ln "$0" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-      echo $srcfile > "$lockfile"
-    fi
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $srcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $srcfile"
-      fi
-
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	status=$?
-	if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $status
-	fi
-      fi
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	command="$command -o $lobj"
-      fi
-
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit 1
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
-      # Allow error messages only from the first compilation.
-      suppress_output=' >/dev/null 2>&1'
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $srcfile"
-      else
-	command="$base_compile $srcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit 1
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
-    else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
-    fi
-
-    $run $mv "${libobj}T" "${libobj}"
-
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
-    fi
-
-    exit 0
-    ;;
-
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invokation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args="$nonopt"
-    base_compile="$nonopt"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    add_flags=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	else
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	fi
-	build_libtool_libs=no
-	build_old_libs=yes
-	prefer_static_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      base_compile="$base_compile $arg"
-      shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit 1
-	  fi
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat $save_arg`
-	    do
-#	      moreargs="$moreargs $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-
-	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		pic_object=
-		non_pic_object=
-
-		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
-
-		if test -z "$pic_object" || \
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
-		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit 1
-		fi
-
-		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
-
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
-		    prev=
-		  fi
-
-		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
-		  arg="$pic_object"
-		fi
-
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-
-		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit 1
-		else
-		  # Dry-run case.
-
-		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      fi
-	    done
-	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit 1
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit 1
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
-	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit 1
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  ;;
-	esac
-	continue
-	;;
-
-      -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit 1
-	  fi
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "*) ;;
-	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-mingw* | *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
-	    continue
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	deplibs="$deplibs $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit 1
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
-
-      -static)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	add_flags="$add_flags $arg"
-	;;
-
-      *.$objext)
-	# A standard object.
-	objs="$objs $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  pic_object=
-	  non_pic_object=
-
-	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
-
-	  if test -z "$pic_object" || \
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
-	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit 1
-	  fi
-
-	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
-
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
-
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
-		prev=
-		continue
-	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
-
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
-	      prev=
-	    fi
-
-	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
-	    arg="$pic_object"
-	  fi
-
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
-
-	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit 1
-	  else
-	    # Dry-run case.
-
-	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
-	  prev=
-	else
-	  deplibs="$deplibs $arg"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	add_flags="$add_flags $arg"
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done # argument parsing loop
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Infer tagged configuration to use if any are available and
-    # if one wasn't chosen via the "--tag" command line option.
-    # Only attempt this if the compiler in the base link
-    # command doesn't match the default compiler.
-    if test -n "$available_tags" && test -z "$tagname"; then
-      case $base_compile in
-      "$CC "*) ;;
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when ltconfig was run.
-      "`$echo $CC` "*) ;;
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
-	    case $base_compile in
-	    "$CC "*)
-	      # The compiler in $compile_command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    "`$echo $CC` "*)
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  echo "$modename: unable to infer tagged configuration"
-	  echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit 1
-#       else
-#         echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
-    # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      status=$?
-      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $status
-      fi
-    fi
-
-    # Determine the type of output
-    case $output in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    specialdeplibs=
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
-	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	esac
-      fi
-      libs="$libs $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if test "X$duplicate_deps" = "Xyes" ; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
-    case $linkmode in
-    lib)
-	passes="conv link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit 1
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-    for pass in $passes; do
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-	esac
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
-	    continue
-	  fi
-	  if test "$pass" = conv && test "$allow_undefined" = yes; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    # Search the libtool library
-	    lib="$searchdir/lib${name}.la"
-	    if test -f "$lib"; then
-	      found=yes
-	      break
-	    fi
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  fi
-	  ;; # -l
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    ;;
-	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la) lib="$deplib" ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    if test "$deplibs_check_method" != pass_all; then
-	      echo
-	      echo "*** Warning: Trying to link with static lib archive $deplib."
-	      echo "*** I have the capability to make that library automatically link in when"
-	      echo "*** you link to this library.  But I can only do this if you have a"
-	      echo "*** shared version of the library, which you do not appear to have"
-	      echo "*** because the file extensions .$libext of this argument makes me believe"
-	      echo "*** that it is just a static archive that I should not used here."
-	    else
-	      echo
-	      echo "*** Warning: Linking the shared library $output against the"
-	      echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      newdlfiles="$newdlfiles $deplib"
-	    fi
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  $echo "$modename: cannot find the library \`$lib'" 1>&2
-	  exit 1
-	fi
-
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit 1
-	fi
-
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variable installed.
-	installed=yes
-
-	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-	fi
-
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    #echo "Adding $deplib to \$deplibs"
-	    deplibs="$deplib $deplibs"
-            if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-            fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit 1
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit 1
-	  fi
-	  continue
-	fi # $pass = conv
-
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit 1
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit 1
-	  fi
-	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
-	  else
-	    newdlfiles="$newdlfiles $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$libdir"
-	    absdir="$libdir"
-	  fi
-	else
-	  dir="$ladir/$objdir"
-	  absdir="$abs_ladir/$objdir"
-	  # Remove this search path later
-	  notinst_path="$notinst_path $abs_ladir"
-	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit 1
-	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
-	  fi
-	  continue
-	fi
-
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var"; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $dir" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
-	  # This is a shared library
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin*)
-		major=`expr $current - $age`
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    soname=`echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$extract_expsyms_cmds\"
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$old_archive_from_expsyms_cmds\"
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
-
-	  if test "$linkmode" = prog || test "$mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit 1
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test "$linkmode" = prog || test "$mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    fi
-
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    echo
-	    echo "*** Warning: This system can not link to static lib archive $lib."
-	    echo "*** I have the capability to make that library automatically link in when"
-	    echo "*** you link to this library.  But I can only do this if you have a"
-	    echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      echo "*** But as you try to build a module library, libtool will still create "
-	      echo "*** a static module, that should work as long as the dlopening application"
-	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		echo
-		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    convenience="$convenience $dir/$old_library"
-	    old_convenience="$old_convenience $dir/$old_library"
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test "$linkmode" = lib; then
-	  #if test -n "$dependency_libs" &&
-	  #   { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
-	  #     test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
-		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  #fi
-
-	  newlib_search_path="$newlib_search_path $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="-L$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit 1
-		  fi
-		  path="-L$absdir"
-		fi
-		;;
-	      *) continue ;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$deplibs $path" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
-	      esac
-	      ;;
-	    -R*)
-	      temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	      case " $xrpath " in
-	      *" $temp_xrpath "*) ;;
-	      *) xrpath="$xrpath $temp_xrpath";;
-	      esac;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval libname=\"$libname_spec\"
-	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit 1
-	else
-	  echo
-	  echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  echo "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
-	fi
-      fi
-
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
-
-      set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
-	fi
-
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	IFS="$save_ifs"
-
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	current="$2"
-	revision="$3"
-	age="$4"
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	case $revision in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	case $age in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
-
-	irix | nonstopux)
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  major=`expr $current - $age + 1`
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux)
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  major=`expr $current - $age`
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-      fi
-
-      if test "$mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`echo "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       removelist="$removelist $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
-	deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
-	dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
-      done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-	if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
- 	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behaviour.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $rm conftest
-	  $LTCC -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	      # If $name is empty we are operating on a -L argument.
-             if test "$name" != "" && test "$name" -ne "0"; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		set dummy $deplib_matches
-		deplib_match=$2
-		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		  newdeplibs="$newdeplibs $i"
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning: dynamic linker does not accept needed library $i."
-		  echo "*** I have the capability to make that library automatically link in when"
-		  echo "*** you link to this library.  But I can only do this if you have a"
-		  echo "*** shared version of the library, which I believe you do not have"
-		  echo "*** because a test_compile did reveal that the linker did not use it for"
-		  echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  else
-	    # Error occured in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	     # If $name is empty we are operating on a -L argument.
-             if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
-		$LTCC -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
-		  ldd_output=`ldd conftest`
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    echo
-		    echo "*** Warning: dynamic linker does not accept needed library $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which you do not appear to have"
-		    echo "*** because a test_compile did reveal that the linker did not use this one"
-		    echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		  fi
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "***  make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
-	    # If $name is empty we are operating on a -L argument.
-           if test "$name" != "" && test  "$name" != "0"; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		    for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | egrep "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		    done
-	      done
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		echo "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  echo "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  echo "*** with $libname and none of the candidates passed a file format test"
-		  echo "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		for potent_lib in $potential_libs; do
-		  potlib="$potent_lib" # see symlink-check above in file_magic test
-		  if eval echo \"$potent_lib\" 2>/dev/null \
-		      | ${SED} 10q \
-		      | egrep "$match_pattern_regex" > /dev/null; then
-		    newdeplibs="$newdeplibs $a_deplib"
-		    a_deplib=""
-		    break 2
-		  fi
-		done
-	      done
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		echo "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  echo "*** with $libname and none of the candidates passed a file format test"
-		  echo "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
-	     grep . >/dev/null; then
-	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
-
-	    if test "$allow_undefined" = no; then
-	      echo
-	      echo "*** Since this library must not contain undefined symbols,"
-	      echo "*** because either the platform does not support them or"
-	      echo "*** it was explicitly requested with -no-undefined,"
-	      echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	realname="$2"
-	shift; shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
-
-	lib="$output_objdir/$realname"
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    eval cmds=\"$export_symbols_cmds\"
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd" || exit $?
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-	fi
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
-	    generated="$generated $gentop"
-
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case $xlib in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "$mkdir $xdir"
-	      $run $mkdir "$xdir"
-	      status=$?
-	      if test "$status" -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	      libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	    done
-	  fi
-	fi
-
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
-	fi
-
-	# Add all flags from the command line.  We here create a library,
-	# but those flags were only added to compile_command and
-	# finalize_command, which are only used when creating executables.
-	# So do it by hand here.
-	compiler_flags="$compiler_flags $add_flags"
-	# Only add it to commands which use CC, instead of LD, i.e.
-	# only to $compiler_flags
-	#linker_flags="$linker_flags $add_flags"
-
-	# Do each of the archive commands.
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval cmds=\"$archive_expsym_cmds\"
-	else
-	  eval cmds=\"$archive_cmds\"
-	fi
-
-	if len=`expr "X$cmds" : ".*"` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
-
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  delfiles=
-	  last_robj=
-	  k=1
-	  output=$output_objdir/$save_output-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*"` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
-	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
-	      fi
-	      last_robj=$output_objdir/$save_output-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$save_output-${k}.$objext
-	      objlist=$obj
-	      len=1
-	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
-	  # Set up a command to remove the reloadale object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
-	  done
-
-	  $echo "creating a temporary reloadable object file: $output"
-
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
-
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
-
-	  # Do each of the archive commands.
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    eval cmds=\"$archive_expsym_cmds\"
-	  else
-	    eval cmds=\"$archive_cmds\"
-	  fi
-
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~$rm $delfiles\"
-	fi
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-	  exit 0
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
-
-      case $output in
-      *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit 1
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $run $rm $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
-	else
-	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "$mkdir $gentop"
-	  $run $mkdir "$gentop"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
-	  generated="$generated $gentop"
-
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case $xlib in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "$mkdir $xdir"
-	    $run $mkdir "$xdir"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	  done
-	fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      eval cmds=\"$reload_cmds\"
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	exit 0
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
-	exit 0
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	eval cmds=\"$reload_cmds\"
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-      fi
-
-      if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
-      fi
-
-      exit 0
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
-      esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
-
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	;;
-      esac
-
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
-      fi
-
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	    else
-	      $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval 'echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit 1
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G
-      # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath.
-      # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld.
-      # This does not apply on AIX for ia64, which uses a SysV linker.
-      case "$host" in
-        ia64-*-aix5*) ;;
-        *-*-aix4* | *-*-aix5*)
-                   compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"`
-                   finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;;
-      esac
-
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	status=$?
-
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
-	fi
-
-	exit $status
-      fi
-
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$run $rm $output
-	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
-	exit 0
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
-
-      # Now create the wrapper script.
-      $show "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-	case $0 in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
-	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*) exeext=.exe ;;
-	  *) exeext= ;;
-	esac
-	$rm $output
-	trap "$rm $output; exit 1" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit 1
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# win32 systems need to use the prog path for dll
-	# lookup to work
-	*-*-cygwin* | *-*-pw32*)
-	  $echo >> $output "\
-      exec \$progdir/\$program \${1+\"\$@\"}
-"
-	  ;;
-
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \$progdir\\\\\$program \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $echo >> $output "\
-      # Export the path to the program.
-      PATH=\"\$progdir:\$PATH\"
-      export PATH
-
-      exec \$program \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-	chmod +x $output
-      fi
-      exit 0
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  #oldobjs="$oldobjs$old_deplibs $non_pic_objects"
-	  oldobjs="$old_deplibs $non_pic_objects"
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "$mkdir $gentop"
-	$run $mkdir "$gentop"
-	status=$?
-	if test "$status" -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
-	generated="$generated $gentop"
-
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case $xlib in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "$mkdir $xdir"
-	  $run $mkdir "$xdir"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
-      fi
-
-      compiler_flags="$compiler_flags $add_flags"
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	eval cmds=\"$old_archive_from_new_cmds\"
-      else
-	eval cmds=\"$old_archive_cmds\"
-
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
-	  for obj in $save_oldobjs
-	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*"` &&
-	       test "$len" -le "$max_cmd_len"; then
-	      :
-	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
-	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  eval cmds=\"\$concat_cmds~$old_archive_cmds\"
-	fi
-      fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="($relink_command; cd `pwd`; $SHELL $0 --mode=relink $libtool_args)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit 1
-		fi
-		newdependency_libs="$newdependency_libs $libdir/$name"
-		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $rm $output
-	  # place dlname in correct position for cygwin
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-	  esac
-	  $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then
-	    $echo >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      fi
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-      ;;
-    esac
-    exit 0
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg="$nonopt"
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest="$arg"
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*) ;;
-
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest="$arg"
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    continue
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  eval cmds=\"$postinstall_cmds\"
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit 0
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $wrapper ;;
-	  *) . ./$wrapper ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit 1
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-	      else
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
-	      file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyways
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      eval cmds=\"$old_postinstall_cmds\"
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $0 --finish$current_libdirs'
-    else
-      exit 0
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  eval cmds=\"$finish_cmds\"
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    exit 0
-
-    echo "----------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      echo "   $libdir"
-    done
-    echo
-    echo "If you ever happen to want to link against installed libraries"
-    echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    echo
-    echo "See any operating system documentation about shared libraries for"
-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    echo "----------------------------------------------------------------------"
-    exit 0
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit 1
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit 1
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved enviroment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit 0
-    fi
-    ;;
-
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    rmdirs=
-
-    for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
-	objdir="$objdir"
-      else
-	objdir="$dir/$objdir"
-      fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-      test "$mode" = uninstall && objdir="$dir"
-
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
-	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
-	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-	  test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-
-	  if test "$mode" = uninstall; then
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      eval cmds=\"$postuninstall_cmds\"
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      eval cmds=\"$old_postuninstall_cmds\"
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	  fi
-	fi
-	;;
-
-      *.lo)
-	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
-	  # Read the .lo file
-	  . $dir/$name
-
-	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$pic_object"
-	  fi
-
-	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$non_pic_object"
-	  fi
-	fi
-	;;
-
-      *)
-	# Do a test to see if this is a libtool program.
-	if test "$mode" = clean &&
-	   (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  relink_command=
-	  . $dir/$file
-
-	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-	  if test "$fast_install" = yes && test -n "$relink_command"; then
-	    rmfiles="$rmfiles $objdir/lt-$name"
-	  fi
-	fi
-	;;
-      esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
-    done
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
-      fi
-    done
-
-    exit $exit_status
-    ;;
-
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit 1
-    ;;
-  esac
-
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit 1
-  fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
-  exit 1
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
-  exit 0
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-  ;;
-esac
-
-echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit 0
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/admin/missing b/admin/missing
deleted file mode 100755
index f8fdc47..0000000
--- a/admin/missing
+++ /dev/null
@@ -1,336 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 1.0 - GNU automake"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
diff --git a/admin/mkinstalldirs b/admin/mkinstalldirs
deleted file mode 100755
index d2d5f21..0000000
--- a/admin/mkinstalldirs
+++ /dev/null
@@ -1,111 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
-  case $1 in
-    -h | --help | --h*)         # -h for help
-      echo "$usage" 1>&2
-      exit 0
-      ;;
-    -m)                         # -m PERM arg
-      shift
-      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
-      dirmode=$1
-      shift
-      ;;
-    --)                         # stop option processing
-      shift
-      break
-      ;;
-    -*)                         # unknown option
-      echo "$usage" 1>&2
-      exit 1
-      ;;
-    *)                          # first non-opt arg
-      break
-      ;;
-  esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-  0) exit 0 ;;
-esac
-
-case $dirmode in
-  '')
-    if mkdir -p -- . 2>/dev/null; then
-      echo "mkdir -p -- $*"
-      exec mkdir -p -- "$@"
-    fi
-    ;;
-  *)
-    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-      echo "mkdir -m $dirmode -p -- $*"
-      exec mkdir -m "$dirmode" -p -- "$@"
-    fi
-    ;;
-esac
-
-for file
-do
-  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-  shift
-
-  pathcomp=
-  for d
-  do
-    pathcomp="$pathcomp$d"
-    case $pathcomp in
-      -*) pathcomp=./$pathcomp ;;
-    esac
-
-    if test ! -d "$pathcomp"; then
-      echo "mkdir $pathcomp"
-
-      mkdir "$pathcomp" || lasterr=$?
-
-      if test ! -d "$pathcomp"; then
-  	errstatus=$lasterr
-      else
-  	if test ! -z "$dirmode"; then
-	  echo "chmod $dirmode $pathcomp"
-    	  lasterr=""
-  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-  	  if test ! -z "$lasterr"; then
-  	    errstatus=$lasterr
-  	  fi
-  	fi
-      fi
-    fi
-
-    pathcomp="$pathcomp/"
-  done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# End:
-# mkinstalldirs ends here
diff --git a/admin/nmcheck b/admin/nmcheck
deleted file mode 100755
index 1544713..0000000
--- a/admin/nmcheck
+++ /dev/null
@@ -1,371 +0,0 @@
-#!/usr/bin/perl -w
-
-# Check namespace cleanness of a library.
-# Allowed symbols are passed as arguments.
-# They may have trailing * = wildcard.
-# Wildcards may be also specified as *::* (e.g. K*::* for all KDE classes)
-# Symbols are listed as full function unmangled names without arguments,
-# e.g. 'foo bar* nspace::*' allows foo(), foo(int), bar(), barbar()
-# and all symbols in namespace/class nspace.
-# If an argument has comma in it, it's a filename of a file containing
-# allowed symbols, one per line.
-
-
-$thisProg   = "$0";     # This programs name
-
-$library = "";
-$allowed_symbols = "";
-$debug = 0;
-$allowed_weak = "";
-$weak_specified = 0;
-
-while( defined( $ARGV[ 0 ] ))
-{
-    $_ = shift;
-    if( /^--verbose$|^-v$/ )
-    {
-	$debug = 1;
-    }
-    elsif( /^--help$|^-h$/ )
-    {
-        print STDOUT "Usage $thisProg [OPTION] ... library [allowed symbols] ...\n",
-                "\n",
-		"Check if the given library has only allowed public symbols.\n",
-                "\n",
-		"  --allowweak=[symbol] allow only these weak symbols\n",
-                "  -v, --verbose        verbosely list files processed\n",
-                "  -h, --help           print this help, then exit\n";
-        exit 0;
-    }
-    elsif( /^--allowweak=(.*)$/ )
-    {
-	$allowed_weak .= " " . $1;
-	$weak_specified = 1;
-    }
-    elsif( /^--allowweak$/ ) # simply list all weak
-    {
-	$allowed_weak .= " ";
-	$weak_specified = 1;
-    }
-    elsif( /^--*/ )
-    {
-	die "Invalid argument!\n";
-    }
-    else
-    {
-	if( ! $library )
-	{
-	    $library = $_;
-	}
-	else
-	{
-	    $allowed_symbols .= " " . $_;
-	}
-    }
-}
-
-if( ! $weak_specified )
-{
-    $allowed_weak = "*"; 
-    # allow all weak symbols by default
-    # instances of templates and similar stuff - unfortunately includes also things from other libraries,
-    # so it cannot be on by default
-}
-
-print STDERR "library:" . $library . "\n" if $debug;
-print STDERR "allowed_symbols:" . $allowed_symbols . "\n" if $debug;
-print STDERR "allowed_weak:" . $allowed_weak . "\n" if $debug;
-
-$default_symbols = "_fini _init";  # system symbols
-# on my system, every .so has :
-# A _DYNAMIC
-# A _GLOBAL_OFFSET_TABLE_
-# A __bss_start
-# A _edata
-# A _end
-# T _fini
-# T _init
-# no need to list A symbols in $default_symbols
-
-print STDERR "default_symbols: " . $default_symbols . "\n" if $debug;
-
-print STDOUT "Namespace cleanness check for " . $library . " :\n";
-
-$lib_file = "";
-if( $library =~ /\.la$/ )
-{
-    # get the real library file from .la
-    open( FILEIN, $library ) || die "Couldn't open $! !\n";
-    while( $line = <FILEIN> )
-    {
-	if( $line =~ /library_names=\'([^ ]*).*/o )
-	{
-	    $lib_file = $1;
-	}
-    }
-    close( FILEIN );
-    if( ! $lib_file )
-    {
-	print STDERR "Library file not found in .la file!\n";
-	exit 1;
-    }
-    my $libpath = $library;
-    $libpath =~ s%[^/]*$%%;
-    if(  -e $libpath . ".libs/" . $lib_file )
-    {
-	$lib_file = $libpath . ".libs/" . $lib_file;
-    }
-    else
-    {
-	$lib_file = $libpath . $lib_file;
-    }
-}
-else
-{
-    $lib_file = $library;
-}
-
-print STDERR "libfile: ". $lib_file . "\n" if $debug;
-
-$allowed_symbols .= " " . $default_symbols;
-
-sub process_symbols($\@\%\@);
-
-@wildcards = ();
-%exacts = ();
-@regwildcards = ();
-process_symbols( $allowed_symbols, @wildcards, %exacts, @regwildcards );
-@weak_wildcards = ();
-%weak_exacts = ();
-@weak_regwildcards = ();
-process_symbols( $allowed_weak, @weak_wildcards, %weak_exacts, @weak_regwildcards );
-
-# grep is for stripping not exported symbols, which don't have address (=first column)
-$nm_command = "nm -BDCg " . $lib_file . " | grep -v '^ ' |";
-
-# TODO how portable is this nmcheck stuff?
-
-print STDERR "nm command:" . $nm_command . "\n" if $debug;
-
-open( FILEIN, $nm_command ) || die "nm command failed\n";
-
-my $exit_code = 0;
-
-while( $line = <FILEIN> )
-{
-    my $type;
-    my $symbol;
-    if( $line =~ /^[^ ]* (.) (.*)$/o )
-    {
-	$type = $1;
-	$symbol = $2;
-    }
-    else
-    {
-	die "Invalid line: " . $line . "\n";
-    }
-    
-    print STDERR "Type: " . $type . " , symbol: " . $symbol . "\n" if $debug;
-    if( $type eq "A" )
-    { # these should be system symbols, so ignore them
-	next;
-    }
-
-    my $orig_symbol = $symbol;
-
-    if( $symbol =~ /\(anonymous namespace\)/o )
-    { # TODO tell to prefer named namespaces? (shorter symbols)
-	next;
-    }
-
-    # strip prefixes
-    # the :: appending is to make "CLASS::*" work also for "vtable for CLASS"
-    $symbol =~ s/^typeinfo for (.*)$/$1::/o;
-    $symbol =~ s/^typeinfo fn for (.*)$/$1::/o;
-    $symbol =~ s/^typeinfo name for (.*)$/$1::/o;
-    $symbol =~ s/^vtable for (.*)$/$1::/o;
-    $symbol =~ s/^guard variable for (.*)$/$1::/o;
-    $symbol =~ s/^reference temporary for (.*)$/$1::/o;
-    $symbol =~ s/^VTT for (.*)$/$1::/o;
-    $symbol =~ s/^virtual thunk \[[^\]]*\] to (.*)$/$1::/o;
-    $symbol =~ s/^non-virtual thunk \[[^\]]*\] to (.*)$/$1::/o;
-    $symbol =~ s/^covariant return thunk \[[^\]]*\] to (.*)$/$1::/o;
-    $symbol =~ s/^construction vtable thunk for (.*)$/$1::/o;
-    $symbol =~ s/^construction vtable for .*-in-(.*) [0-9]*$/$1::/o;
-
-    # templates seem to have also return types mangled in their name, and nm prints it too
-    # they have also template arguments in the symbol
-    # get rid of both of those
-    while( $symbol =~ /<.*>/o )
-    {
-        $symbol =~ s/<[^<>]*>//o; # strip innermost <>
-    }
-    if( $symbol !~ /operator\(\)/o )
-    {
-	$symbol =~ s/ ?\(.*\).*$//o;  # strip () and all after it
-    }
-    else
-    {
-	$symbol =~ s/(^|:| )operator\(\) ?\(.*\).*$//o;  # strip () and all after it
-    }
-    $symbol =~ s/\[.*\] *$//o;   # strip [in-charge] etc.
-    if( $symbol =~ /(^|:| )operator /o )
-    {
-	$symbol =~ s/.* ([^\s]*)operator /$1/o; # strip everything before 'X::operator blah'
-    }
-    else
-    {
-	$symbol =~ s/.* ([^\s]+) *$/$1/o;  # get last word (strip return type)
-    }
-
-    # print STDERR "Processed symbol: " . $symbol . "\n" if $debug;
-    
-    my $found = 0;
-    if( $exacts{ $symbol } )
-    {
-	$found = 1;
-    }
-    if( ! $found )
-    {
-	for my $wild ( @wildcards )
-	{
-	    if( index( $symbol, $wild ) == 0 )
-	    {
-		$found = 1;
-		last;
-	    }
-	}
-    }
-    if( ! $found )
-    {
-	for my $wild ( @regwildcards )
-	{
-	    if( $symbol =~ /^$wild$/ )
-	    {
-		$found = 1;
-		last;
-	    }
-	}
-    }
-    if( ( ! $found ) && ( $type eq "W" || $type eq "V" ))
-    {
-	if( $weak_exacts{ $symbol } )
-	{
-	    $found = 1;
-	}
-	if( ! $found )
-	{
-	    for my $wild ( @weak_wildcards )
-	    {
-	        if( index( $symbol, $wild ) == 0 )
-	        {
-	    	    $found = 1;
-		    last;
-		}
-	    }
-	}
-	if( ! $found )
-	{
-	    for my $wild ( @weak_regwildcards )
-	    {
-	        if( $symbol =~ /^$wild$/ )
-	        {
-		    $found = 1;
-		    last;
-	        }
-	    }
-	}
-    }
-
-    if( ! $found )
-    {
-	print STDERR "Public symbol " . $orig_symbol . " is not allowed!\n";
-	$exit_code = 1;
-    }
-}
-
-close( FILEIN );
-
-print STDOUT $exit_code == 0 ? "OK\n" : "FAILED\n";
-
-exit $exit_code;
-
-sub process_symbols($\@\%\@)
-{
-    my $allowed_symbols = $_[ 0 ];
-    my $wildcards_ref = $_[ 1 ];
-    my $exacts_ref = $_[ 2 ];
-    my $regwildcards_ref = $_[ 3 ];
-    
-    $allowed_symbols =~ s/^ *//o;  # strip whitespace
-    $allowed_symbols =~ s/ *$//o;
-
-    if( $allowed_symbols eq "NONE" )
-    {
-	$allowed_symbols = "";
-    }
-
-    my @symbols1 = split( ' ', $allowed_symbols );
-    my $i = 0;
-    my @symbols2 = ();
-    while( defined( $symbols1[ $i ] ))
-    {
-	my $symbol = $symbols1[ $i ];
-	if( $symbol =~ /\./ )  # dot in name -> file
-	{
-	    open( SYMIN, $symbol ) || die ( "Cannot open file " . $symbol . "!" );
-	    while( $line = <SYMIN> )
-	    {
-		$line =~ s/^\s*//o;  # strip whitespace
-		$line =~ s/\s*$//o;
-		if( $line !~ /^$/o  # empty line
-		    &&  $line !~ /^\s*#/ ) # comment line starting with #
-		{
-		    $symbols2[ $#symbols2 + 1 ] = $line;
-		}
-	    }
-	    close( SYMIN );
-	}
-	else
-	{
-	    $symbols2[ $#symbols2 + 1 ] = $symbol;
-	}
-	$i++;
-    }
-    $i = 0;
-    while( defined( $symbols2[ $i ] ))
-    {
-	my $symbol = $symbols2[ $i ];
-	if( $symbol =~ /__/
-	    || $symbol =~ /^_[A-Z]/ )
-	{ # ISO C++ 2.10.2
-	    die "Symbols containing a double underscore or beginning with an underscore and an upper-case letter are reserved!\n";
-	}
-	elsif( $symbol eq "main"
-	    || $symbol eq "main*" )
-	{
-	    die "Symbol main is not allowed!\n";
-	}
-	if( $symbol =~ /^([^\*]*)\*$/o   # trailing * without any * before it
-	    && $symbol !~ /operator\*$/o )
-        {
-	    print STDERR "wildcard:" . $symbol . "\n" if $debug;
-    	    $wildcards_ref->[ $#{$wildcards_ref} + 1 ] = $1;
-	}
-	elsif( $symbol =~ /\*$/o
-	    && ( $symbol =~ /\*::/o || $symbol =~ /::\*/o )
-	    && $symbol !~ /^\*/o
-	    && $symbol !~ /operator\*$/o )
-	{
-	    print STDERR "regwildcard:" . $symbol . "\n" if $debug;
-	    $symbol =~ s/\*/\.\*/go;  # change * to .* (regexp)
-	    $regwildcards_ref->[ $#{$regwildcards_ref} + 1 ] = $symbol;
-	}
-	else
-	{
-	    print STDERR "exact:" . $symbol . "\n" if $debug;
-	    $exacts_ref->{ $symbol } = 1;
-	}
-	$i++;
-    }
-}
diff --git a/admin/ylwrap b/admin/ylwrap
deleted file mode 100755
index 5ea68e4..0000000
--- a/admin/ylwrap
+++ /dev/null
@@ -1,143 +0,0 @@
-#! /bin/sh
-# ylwrap - wrapper for lex/yacc invocations.
-# Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Usage:
-#     ylwrap INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
-# * INPUT is the input file
-# * OUTPUT is file PROG generates
-# * DESIRED is file we actually want
-# * PROGRAM is program to run
-# * ARGS are passed to PROG
-# Any number of OUTPUT,DESIRED pairs may be used.
-
-# The input.
-input="$1"
-shift
-case "$input" in
- [\\/]* | ?:[\\/]*)
-    # Absolute path; do nothing.
-    ;;
- *)
-    # Relative path.  Make it absolute.
-    input="`pwd`/$input"
-    ;;
-esac
-
-# The directory holding the input.
-input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
-# Quote $INPUT_DIR so we can use it in a regexp.
-# FIXME: really we should care about more than `.' and `\'.
-input_rx=`echo "$input_dir" | sed -e 's,\\\\,\\\\\\\\,g' -e 's,\\.,\\\\.,g'`
-
-echo "got $input_rx"
-
-pairlist=
-while test "$#" -ne 0; do
-   if test "$1" = "--"; then
-      shift
-      break
-   fi
-   pairlist="$pairlist $1"
-   shift
-done
-
-# The program to run.
-prog="$1"
-shift
-# Make any relative path in $prog absolute.
-case "$prog" in
- [\\/]* | ?:[\\/]*) ;;
- *[\\/]*) prog="`pwd`/$prog" ;;
-esac
-
-# FIXME: add hostname here for parallel makes that run commands on
-# other machines.  But that might take us over the 14-char limit.
-dirname=ylwrap$$
-trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
-mkdir $dirname || exit 1
-
-cd $dirname
-
-$prog ${1+"$@"} "$input"
-status=$?
-
-if test $status -eq 0; then
-   set X $pairlist
-   shift
-   first=yes
-   # Since DOS filename conventions don't allow two dots,
-   # the DOS version of Bison writes out y_tab.c instead of y.tab.c
-   # and y_tab.h instead of y.tab.h. Test to see if this is the case.
-   y_tab_nodot="no"
-   if test -f y_tab.c || test -f y_tab.h; then
-      y_tab_nodot="yes"
-   fi
-
-   while test "$#" -ne 0; do
-      from="$1"
-      # Handle y_tab.c and y_tab.h output by DOS
-      if test $y_tab_nodot = "yes"; then
-	 if test $from = "y.tab.c"; then
-	    from="y_tab.c"
-	 else
-	    if test $from = "y.tab.h"; then
-	       from="y_tab.h"
-	    fi
-	 fi
-      fi
-      if test -f "$from"; then
-         # If $2 is an absolute path name, then just use that,
-         # otherwise prepend `../'.
-         case "$2" in
-	   [\\/]* | ?:[\\/]*) target="$2";;
-	   *) target="../$2";;
-	 esac
-
-	 # Edit out `#line' or `#' directives.  We don't want the
-	 # resulting debug information to point at an absolute srcdir;
-	 # it is better for it to just mention the .y file with no
-	 # path.
-	 sed -e "/^#/ s,$input_rx,," "$from" > "$target" || status=$?
-      else
-	 # A missing file is only an error for the first file.  This
-	 # is a blatant hack to let us support using "yacc -d".  If -d
-	 # is not specified, we don't want an error when the header
-	 # file is "missing".
-	 if test $first = yes; then
-	    status=1
-	 fi
-      fi
-      shift
-      shift
-      first=no
-   done
-else
-   status=$?
-fi
-
-# Remove the directory.
-cd ..
-rm -rf $dirname
-
-exit $status
diff --git a/colorscheme/CMakeLists.txt b/colorscheme/CMakeLists.txt
new file mode 100644
index 0000000..d1988a9
--- /dev/null
+++ b/colorscheme/CMakeLists.txt
@@ -0,0 +1,18 @@
+################################################################################
+# twin-style-mallory                                                           #
+# ------------------                                                           #
+# This file is licensed under the terms of GNU GPL v3 or later.                #
+# Improvements and feedback are welcome.                                       #
+################################################################################
+
+### Data #######################################################################
+install(
+  FILES
+    Mallory-1.0-Caramel.kcsrc Mallory-1.0-Double.Blue.kcsrc
+    Mallory-1.0-Double.Grey.kcsrc Mallory-1.0-Flat.Blue.kcsrc
+    Mallory-1.0-Flat.Green.kcsrc Mallory-1.0-Flat.Grey.kcsrc
+    Mallory-1.0-Flat.Sands.kcsrc Mallory-1.0-Green.Halo.kcsrc
+    Mallory-1.0-It.s.A.Boy.kcsrc Mallory-1.0-It.s.A.Girl.kcsrc
+    Mallory-1.0-Nenuphars.kcsrc
+  DESTINATION ${DATA_INSTALL_DIR}/tdedisplay/color-schemes
+)
\ No newline at end of file
diff --git a/config.h b/config.h
deleted file mode 100644
index b832273..0000000
--- a/config.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* config.h.  Generated by configure.  */
-/* config.h.in.  Generated from configure.in by autoheader.  */
-
-/* Define if you have the CoreAudio API */
-/* #undef HAVE_COREAUDIO */
-
-/* Define to 1 if you have the <crt_externs.h> header file. */
-/* #undef HAVE_CRT_EXTERNS_H */
-
-/* Defines if your system has the crypt function */
-#define HAVE_CRYPT 1
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#define HAVE_DLFCN_H 1
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#define HAVE_INTTYPES_H 1
-
-/* Define if you have libjpeg */
-#define HAVE_LIBJPEG 1
-
-/* Define if you have libpng */
-#define HAVE_LIBPNG 1
-
-/* Define if you have a working libpthread (will enable threaded code) */
-#define HAVE_LIBPTHREAD 1
-
-/* Define if you have libz */
-#define HAVE_LIBZ 1
-
-/* Define to 1 if you have the <memory.h> header file. */
-#define HAVE_MEMORY_H 1
-
-/* Define if your system needs _NSGetEnviron to set up the environment */
-/* #undef HAVE_NSGETENVIRON */
-
-/* Define to 1 if you have the <pthread/linuxthreads/pthread.h> header file.
-   */
-/* #undef HAVE_PTHREAD_LINUXTHREADS_PTHREAD_H */
-
-/* Define if you have the res_init function */
-#define HAVE_RES_INIT 1
-
-/* Define to 1 if you have the `snprintf' function. */
-#define HAVE_SNPRINTF 1
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#define HAVE_STDINT_H 1
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define to 1 if you have the <strings.h> header file. */
-#define HAVE_STRINGS_H 1
-
-/* Define to 1 if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define if you have strlcat */
-/* #undef HAVE_STRLCAT */
-
-/* Define if you have the strlcat prototype */
-/* #undef HAVE_STRLCAT_PROTO */
-
-/* Define if you have strlcpy */
-/* #undef HAVE_STRLCPY */
-
-/* Define if you have the strlcpy prototype */
-/* #undef HAVE_STRLCPY_PROTO */
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#define HAVE_SYS_STAT_H 1
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#define HAVE_UNISTD_H 1
-
-/* Define to 1 if you have the `vsnprintf' function. */
-#define HAVE_VSNPRINTF 1
-
-/* Suffix for lib directories */
-#define KDELIBSUFF ""
-
-/* Name of package */
-#define PACKAGE "mallory"
-
-/* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT ""
-
-/* Define to the full name of this package. */
-#define PACKAGE_NAME ""
-
-/* Define to the full name and version of this package. */
-#define PACKAGE_STRING ""
-
-/* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME ""
-
-/* Define to the version of this package. */
-#define PACKAGE_VERSION ""
-
-/* The size of a `char *', as computed by sizeof. */
-#define SIZEOF_CHAR_P 4
-
-/* The size of a `int', as computed by sizeof. */
-#define SIZEOF_INT 4
-
-/* The size of a `long', as computed by sizeof. */
-#define SIZEOF_LONG 4
-
-/* The size of a `size_t', as computed by sizeof. */
-#define SIZEOF_SIZE_T 4
-
-/* The size of a `unsigned long', as computed by sizeof. */
-#define SIZEOF_UNSIGNED_LONG 4
-
-/* Define to 1 if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Version number of package */
-#define VERSION "1.0"
-
-/*
- * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
- * headers and I'm too lazy to write a configure test as long as only
- * unixware is related
- */
-#ifdef _UNIXWARE
-#define HAVE_BOOLEAN
-#endif
-
-
-
-/*
- * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
- * that defines bzero.
- */
-
-#if defined(_AIX)
-#include <strings.h>
-#endif
-
-
-
-#if !defined(HAVE_STRLCAT_PROTO)
-#ifdef __cplusplus
-extern "C"
-#endif
-unsigned long strlcat(char*, const char*, unsigned long);
-#endif
-
-
-
-#if !defined(HAVE_STRLCPY_PROTO)
-#ifdef __cplusplus
-extern "C"
-#endif
-unsigned long strlcpy(char*, const char*, unsigned long);
-#endif
-
-
-
-/*
- * On HP-UX, the declaration of vsnprintf() is needed every time !
- */
-
-#if !defined(HAVE_VSNPRINTF) || defined(hpux)
-#if __STDC__
-#include <stdarg.h>
-#include <stdlib.h>
-#else
-#include <varargs.h>
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
-#ifdef __cplusplus
-extern "C"
-#endif
-int snprintf(char *str, size_t n, char const *fmt, ...);
-#endif
-
-
-
-#if defined(__SVR4) && !defined(__svr4__)
-#define __svr4__ 1
-#endif
-
-
-/* Compatibility define */
-#define ksize_t socklen_t
-
-/* Define the real type of socklen_t */
-/* #undef socklen_t */
diff --git a/config.h.cmake b/config.h.cmake
new file mode 100644
index 0000000..1370df9
--- /dev/null
+++ b/config.h.cmake
@@ -0,0 +1,8 @@
+#define VERSION "@VERSION@"
+
+// Defined if you have fvisibility and fvisibility-inlines-hidden support.
+#cmakedefine __KDE_HAVE_GCC_VISIBILITY 1
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#cmakedefine WORDS_BIGENDIAN @WORDS_BIGENDIAN@
\ No newline at end of file
diff --git a/config.h.in b/config.h.in
deleted file mode 100644
index fc94a9a..0000000
--- a/config.h.in
+++ /dev/null
@@ -1,196 +0,0 @@
-/* config.h.in.  Generated from configure.in by autoheader.  */
-
-/* Define if you have the CoreAudio API */
-#undef HAVE_COREAUDIO
-
-/* Define to 1 if you have the <crt_externs.h> header file. */
-#undef HAVE_CRT_EXTERNS_H
-
-/* Defines if your system has the crypt function */
-#undef HAVE_CRYPT
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define if you have libjpeg */
-#undef HAVE_LIBJPEG
-
-/* Define if you have libpng */
-#undef HAVE_LIBPNG
-
-/* Define if you have a working libpthread (will enable threaded code) */
-#undef HAVE_LIBPTHREAD
-
-/* Define if you have libz */
-#undef HAVE_LIBZ
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define if your system needs _NSGetEnviron to set up the environment */
-#undef HAVE_NSGETENVIRON
-
-/* Define to 1 if you have the <pthread/linuxthreads/pthread.h> header file.
-   */
-#undef HAVE_PTHREAD_LINUXTHREADS_PTHREAD_H
-
-/* Define if you have the res_init function */
-#undef HAVE_RES_INIT
-
-/* Define to 1 if you have the `snprintf' function. */
-#undef HAVE_SNPRINTF
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define if you have strlcat */
-#undef HAVE_STRLCAT
-
-/* Define if you have the strlcat prototype */
-#undef HAVE_STRLCAT_PROTO
-
-/* Define if you have strlcpy */
-#undef HAVE_STRLCPY
-
-/* Define if you have the strlcpy prototype */
-#undef HAVE_STRLCPY_PROTO
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `vsnprintf' function. */
-#undef HAVE_VSNPRINTF
-
-/* Suffix for lib directories */
-#undef KDELIBSUFF
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* The size of a `char *', as computed by sizeof. */
-#undef SIZEOF_CHAR_P
-
-/* The size of a `int', as computed by sizeof. */
-#undef SIZEOF_INT
-
-/* The size of a `long', as computed by sizeof. */
-#undef SIZEOF_LONG
-
-/* The size of a `size_t', as computed by sizeof. */
-#undef SIZEOF_SIZE_T
-
-/* The size of a `unsigned long', as computed by sizeof. */
-#undef SIZEOF_UNSIGNED_LONG
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/*
- * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
- * headers and I'm too lazy to write a configure test as long as only
- * unixware is related
- */
-#ifdef _UNIXWARE
-#define HAVE_BOOLEAN
-#endif
-
-
-
-/*
- * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
- * that defines bzero.
- */
-
-#if defined(_AIX)
-#include <strings.h>
-#endif
-
-
-
-#if !defined(HAVE_STRLCAT_PROTO)
-#ifdef __cplusplus
-extern "C"
-#endif
-unsigned long strlcat(char*, const char*, unsigned long);
-#endif
-
-
-
-#if !defined(HAVE_STRLCPY_PROTO)
-#ifdef __cplusplus
-extern "C"
-#endif
-unsigned long strlcpy(char*, const char*, unsigned long);
-#endif
-
-
-
-/*
- * On HP-UX, the declaration of vsnprintf() is needed every time !
- */
-
-#if !defined(HAVE_VSNPRINTF) || defined(hpux)
-#if __STDC__
-#include <stdarg.h>
-#include <stdlib.h>
-#else
-#include <varargs.h>
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
-#ifdef __cplusplus
-extern "C"
-#endif
-int snprintf(char *str, size_t n, char const *fmt, ...);
-#endif
-
-
-
-#if defined(__SVR4) && !defined(__svr4__)
-#define __svr4__ 1
-#endif
-
-
-/* Compatibility define */
-#undef ksize_t
-
-/* Define the real type of socklen_t */
-#undef socklen_t
diff --git a/config.log b/config.log
deleted file mode 100644
index f6ded39..0000000
--- a/config.log
+++ /dev/null
@@ -1,2225 +0,0 @@
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by configure, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  $ ./configure --prefix=/opt/kde3
-
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = tinbox
-uname -m = i686
-uname -r = 2.6.8-24.11-default
-uname -s = Linux
-uname -v = #1 Fri Jan 14 13:01:26 UTC 2005
-
-/usr/bin/uname -p = unknown
-/bin/uname -X     = unknown
-
-/bin/arch              = i686
-/usr/bin/arch -k       = unknown
-/usr/convex/getsysinfo = unknown
-hostinfo               = unknown
-/bin/machine           = unknown
-/usr/bin/oslevel       = unknown
-/bin/universe          = unknown
-
-PATH: /home/maxilys/bin
-PATH: /usr/local/bin
-PATH: /usr/bin
-PATH: /usr/X11R6/bin
-PATH: /bin
-PATH: /usr/games
-PATH: /opt/gnome/bin
-PATH: /opt/kde3/bin
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-configure:1543: checking build system type
-configure:1561: result: i686-pc-linux-gnu
-configure:1569: checking host system type
-configure:1583: result: i686-pc-linux-gnu
-configure:1591: checking target system type
-configure:1605: result: i686-pc-linux-gnu
-configure:1652: checking for a BSD-compatible install
-configure:1707: result: /usr/bin/install -c
-configure:1722: checking for -p flag to install
-configure:1735: result: yes
-configure:1746: checking whether build environment is sane
-configure:1789: result: yes
-configure:1809: checking for gawk
-configure:1825: found /usr/bin/gawk
-configure:1835: result: gawk
-configure:1845: checking whether make sets $(MAKE)
-configure:1865: result: yes
-configure:2071: checking for style of include used by make
-configure:2099: result: GNU
-configure:2246: checking for gcc
-configure:2262: found /usr/bin/gcc
-configure:2272: result: gcc
-configure:2516: checking for C compiler version
-configure:2519: gcc --version </dev/null >&5
-gcc (GCC) 3.3.4 (pre 3.3.5 20040809)
-Copyright (C) 2003 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:2522: $? = 0
-configure:2524: gcc -v </dev/null >&5
-Reading specs from /usr/lib/gcc-lib/i586-suse-linux/3.3.4/specs
-Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --enable-languages=c,c++,f77,objc,java,ada --disable-checking --libdir=/usr/lib --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit i586-suse-linux
-Thread model: posix
-gcc version 3.3.4 (pre 3.3.5 20040809)
-configure:2527: $? = 0
-configure:2529: gcc -V </dev/null >&5
-gcc: `-V' option must have argument
-configure:2532: $? = 1
-configure:2555: checking for C compiler default output file name
-configure:2558: gcc     conftest.c  >&5
-configure:2561: $? = 0
-configure:2607: result: a.out
-configure:2612: checking whether the C compiler works
-configure:2618: ./a.out
-configure:2621: $? = 0
-configure:2638: result: yes
-configure:2645: checking whether we are cross compiling
-configure:2647: result: no
-configure:2650: checking for suffix of executables
-configure:2652: gcc -o conftest     conftest.c  >&5
-configure:2655: $? = 0
-configure:2680: result: 
-configure:2686: checking for suffix of object files
-configure:2707: gcc -c    conftest.c >&5
-configure:2710: $? = 0
-configure:2732: result: o
-configure:2736: checking whether we are using the GNU C compiler
-configure:2760: gcc -c    conftest.c >&5
-configure:2766: $? = 0
-configure:2770: test -z 
-			 || test ! -s conftest.err
-configure:2773: $? = 0
-configure:2776: test -s conftest.o
-configure:2779: $? = 0
-configure:2792: result: yes
-configure:2798: checking whether gcc accepts -g
-configure:2819: gcc -c -g  conftest.c >&5
-configure:2825: $? = 0
-configure:2829: test -z 
-			 || test ! -s conftest.err
-configure:2832: $? = 0
-configure:2835: test -s conftest.o
-configure:2838: $? = 0
-configure:2849: result: yes
-configure:2866: checking for gcc option to accept ANSI C
-configure:2936: gcc  -c    conftest.c >&5
-configure:2942: $? = 0
-configure:2946: test -z 
-			 || test ! -s conftest.err
-configure:2949: $? = 0
-configure:2952: test -s conftest.o
-configure:2955: $? = 0
-configure:2973: result: none needed
-configure:2991: gcc -c    conftest.c >&5
-conftest.c:2: error: parse error before "me"
-configure:2997: $? = 1
-configure: failed program was:
-| #ifndef __cplusplus
-|   choke me
-| #endif
-configure:3132: checking dependency style of gcc
-configure:3194: result: gcc3
-configure:3205: checking how to run the C preprocessor
-configure:3240: gcc -E  conftest.c
-configure:3246: $? = 0
-configure:3278: gcc -E  conftest.c
-conftest.c:11:28: ac_nonexistent.h: No such file or directory
-configure:3284: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| /* end confdefs.h.  */
-| #include <ac_nonexistent.h>
-configure:3323: result: gcc -E
-configure:3347: gcc -E  conftest.c
-configure:3353: $? = 0
-configure:3385: gcc -E  conftest.c
-conftest.c:11:28: ac_nonexistent.h: No such file or directory
-configure:3391: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| /* end confdefs.h.  */
-| #include <ac_nonexistent.h>
-configure:3515: checking for g++
-configure:3531: found /usr/bin/g++
-configure:3541: result: g++
-configure:3557: checking for C++ compiler version
-configure:3560: g++ --version </dev/null >&5
-g++ (GCC) 3.3.4 (pre 3.3.5 20040809)
-Copyright (C) 2003 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:3563: $? = 0
-configure:3565: g++ -v </dev/null >&5
-Reading specs from /usr/lib/gcc-lib/i586-suse-linux/3.3.4/specs
-Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --enable-languages=c,c++,f77,objc,java,ada --disable-checking --libdir=/usr/lib --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit i586-suse-linux
-Thread model: posix
-gcc version 3.3.4 (pre 3.3.5 20040809)
-configure:3568: $? = 0
-configure:3570: g++ -V </dev/null >&5
-g++: `-V' option must have argument
-configure:3573: $? = 1
-configure:3576: checking whether we are using the GNU C++ compiler
-configure:3600: g++ -c    conftest.cc >&5
-configure:3606: $? = 0
-configure:3610: test -z 
-			 || test ! -s conftest.err
-configure:3613: $? = 0
-configure:3616: test -s conftest.o
-configure:3619: $? = 0
-configure:3632: result: yes
-configure:3638: checking whether g++ accepts -g
-configure:3659: g++ -c -g  conftest.cc >&5
-configure:3665: $? = 0
-configure:3669: test -z 
-			 || test ! -s conftest.err
-configure:3672: $? = 0
-configure:3675: test -s conftest.o
-configure:3678: $? = 0
-configure:3689: result: yes
-configure:3731: g++ -c    conftest.cc >&5
-configure:3737: $? = 0
-configure:3741: test -z 
-			 || test ! -s conftest.err
-configure:3744: $? = 0
-configure:3747: test -s conftest.o
-configure:3750: $? = 0
-configure:3776: g++ -c    conftest.cc >&5
-conftest.cc: In function `int main()':
-conftest.cc:15: error: `exit' undeclared (first use this function)
-conftest.cc:15: error: (Each undeclared identifier is reported only once for 
-   each function it appears in.)
-configure:3782: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| /* end confdefs.h.  */
-| 
-| int
-| main ()
-| {
-| exit (42);
-|   ;
-|   return 0;
-| }
-configure:3731: g++ -c    conftest.cc >&5
-configure:3737: $? = 0
-configure:3741: test -z 
-			 || test ! -s conftest.err
-configure:3744: $? = 0
-configure:3747: test -s conftest.o
-configure:3750: $? = 0
-configure:3776: g++ -c    conftest.cc >&5
-configure:3782: $? = 0
-configure:3786: test -z 
-			 || test ! -s conftest.err
-configure:3789: $? = 0
-configure:3792: test -s conftest.o
-configure:3795: $? = 0
-configure:3820: checking dependency style of g++
-configure:3882: result: gcc3
-configure:4193: checking whether g++ supports -Wmissing-format-attribute
-configure:4229: rm -rf SunWS_cache; g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2   -Wmissing-format-attribute   conftest.cc  1>&5
-cc1plus: warning: -Wmissing-format-attribute ignored without -Wformat
-configure:4235: $? = 0
-configure:4239: test -z 
-			 || test ! -s conftest.err
-configure:4242: $? = 0
-configure:4245: test -s conftest
-configure:4248: $? = 0
-configure:4269: result: yes
-configure:4284: checking whether g++ supports -Wundef
-configure:4320: rm -rf SunWS_cache; g++ -o conftest -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2   -Wformat-security -Wmissing-format-attribute -Wundef   conftest.cc  1>&5
-configure:4326: $? = 0
-configure:4330: test -z 
-			 || test ! -s conftest.err
-configure:4333: $? = 0
-configure:4336: test -s conftest
-configure:4339: $? = 0
-configure:4360: result: yes
-configure:4372: checking whether g++ supports -Wno-long-long
-configure:4408: rm -rf SunWS_cache; g++ -o conftest -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2   -Wformat-security -Wmissing-format-attribute -Wno-long-long   conftest.cc  1>&5
-configure:4414: $? = 0
-configure:4418: test -z 
-			 || test ! -s conftest.err
-configure:4421: $? = 0
-configure:4424: test -s conftest
-configure:4427: $? = 0
-configure:4448: result: yes
-configure:4460: checking whether g++ supports -Wnon-virtual-dtor
-configure:4496: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2   -Wformat-security -Wmissing-format-attribute -Wnon-virtual-dtor   conftest.cc  1>&5
-configure:4502: $? = 0
-configure:4506: test -z 
-			 || test ! -s conftest.err
-configure:4509: $? = 0
-configure:4512: test -s conftest
-configure:4515: $? = 0
-configure:4536: result: yes
-configure:4556: checking whether g++ supports -fno-exceptions
-configure:4592: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2   -Wformat-security -Wmissing-format-attribute -fno-exceptions   conftest.cc  1>&5
-configure:4598: $? = 0
-configure:4602: test -z 
-			 || test ! -s conftest.err
-configure:4605: $? = 0
-configure:4608: test -s conftest
-configure:4611: $? = 0
-configure:4632: result: yes
-configure:4644: checking whether g++ supports -fno-check-new
-configure:4680: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2   -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new   conftest.cc  1>&5
-configure:4686: $? = 0
-configure:4690: test -z 
-			 || test ! -s conftest.err
-configure:4693: $? = 0
-configure:4696: test -s conftest
-configure:4699: $? = 0
-configure:4720: result: yes
-configure:4732: checking whether g++ supports -fno-common
-configure:4768: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2   -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common   conftest.cc  1>&5
-configure:4774: $? = 0
-configure:4778: test -z 
-			 || test ! -s conftest.err
-configure:4781: $? = 0
-configure:4784: test -s conftest
-configure:4787: $? = 0
-configure:4808: result: yes
-configure:4820: checking whether g++ supports -fexceptions
-configure:4856: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2   -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -fexceptions   conftest.cc  1>&5
-configure:4862: $? = 0
-configure:4866: test -z 
-			 || test ! -s conftest.err
-configure:4869: $? = 0
-configure:4872: test -s conftest
-configure:4875: $? = 0
-configure:4896: result: yes
-configure:5557: checking how to run the C++ preprocessor
-configure:5588: g++ -E  conftest.cc
-configure:5594: $? = 0
-configure:5626: g++ -E  conftest.cc
-conftest.cc:14:28: ac_nonexistent.h: No such file or directory
-configure:5632: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| /* end confdefs.h.  */
-| #include <ac_nonexistent.h>
-configure:5671: result: g++ -E
-configure:5695: g++ -E  conftest.cc
-configure:5701: $? = 0
-configure:5733: g++ -E  conftest.cc
-conftest.cc:14:28: ac_nonexistent.h: No such file or directory
-configure:5739: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| /* end confdefs.h.  */
-| #include <ac_nonexistent.h>
-configure:5787: checking whether g++ supports -O0
-configure:5823: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -O0   conftest.cc  1>&5
-configure:5829: $? = 0
-configure:5833: test -z 
-			 || test ! -s conftest.err
-configure:5836: $? = 0
-configure:5839: test -s conftest
-configure:5842: $? = 0
-configure:5863: result: yes
-configure:6179: result: not using lib directory suffix
-configure:6235: checking for ld used by GCC
-configure:6299: result: /usr/i586-suse-linux/bin/ld
-configure:6308: checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld
-GNU ld version 2.15.91.0.2 20040727 (SuSE Linux)
-configure:6320: result: yes
-configure:6325: checking for /usr/i586-suse-linux/bin/ld option to reload object files
-configure:6332: result: -r
-configure:6341: checking for BSD-compatible nm
-configure:6376: result: /usr/bin/nm -B
-configure:6380: checking for a sed that does not truncate output
-configure:6456: result: 
-configure:6459: checking whether ln -s works
-configure:6463: result: yes
-configure:6470: checking how to recognise dependant libraries
-configure:6660: result: pass_all
-configure:6730: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:6733: $? = 0
-configure:6829: checking for egrep
-configure:6839: result: grep -E
-configure:6844: checking for ANSI C header files
-configure:6869: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:6875: $? = 0
-configure:6879: test -z 
-			 || test ! -s conftest.err
-configure:6882: $? = 0
-configure:6885: test -s conftest.o
-configure:6888: $? = 0
-configure:6977: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-conftest.c: In function `main':
-conftest.c:32: warning: implicit declaration of function `exit'
-configure:6980: $? = 0
-configure:6982: ./conftest
-configure:6985: $? = 0
-configure:7000: result: yes
-configure:7024: checking for sys/types.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7024: checking for sys/stat.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7024: checking for stdlib.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7024: checking for string.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7024: checking for memory.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7024: checking for strings.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7024: checking for inttypes.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7024: checking for stdint.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7024: checking for unistd.h
-configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7046: $? = 0
-configure:7050: test -z 
-			 || test ! -s conftest.err
-configure:7053: $? = 0
-configure:7056: test -s conftest.o
-configure:7059: $? = 0
-configure:7070: result: yes
-configure:7096: checking dlfcn.h usability
-configure:7108: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:7114: $? = 0
-configure:7118: test -z 
-			 || test ! -s conftest.err
-configure:7121: $? = 0
-configure:7124: test -s conftest.o
-configure:7127: $? = 0
-configure:7137: result: yes
-configure:7141: checking dlfcn.h presence
-configure:7151: gcc -E  conftest.c
-configure:7157: $? = 0
-configure:7177: result: yes
-configure:7212: checking for dlfcn.h
-configure:7219: result: yes
-configure:7236: checking the maximum length of command line arguments
-configure:7284: result: 32768
-configure:7295: checking command to parse /usr/bin/nm -B output from gcc object
-configure:7380: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-conftest.c:5: warning: no previous prototype for `nm_test_func'
-configure:7383: $? = 0
-configure:7387: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm
-configure:7390: $? = 0
-configure:7442: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c conftstm.o >&5
-configure:7445: $? = 0
-configure:7483: result: ok
-configure:7487: checking for objdir
-configure:7502: result: .libs
-configure:7592: checking for ranlib
-configure:7608: found /usr/bin/ranlib
-configure:7619: result: ranlib
-configure:7672: checking for strip
-configure:7688: found /usr/bin/strip
-configure:7699: result: strip
-configure:7962: checking if gcc static flag  works
-conftest.c:1: warning: return type defaults to `int'
-configure:7985: result: no
-configure:8002: checking if gcc supports -fno-rtti -fno-exceptions
-cc1: warning: "-fno-rtti" is valid for C++ but not for C/ObjC
-cc1: warning: "-fno-rtti" is valid for C++ but not for C/ObjC
-configure:8026: result: no
-configure:8041: checking for gcc option to produce PIC
-configure:8202: result: -fPIC
-configure:8209: checking if gcc PIC flag -fPIC works
-configure:8233: result: yes
-configure:8257: checking if gcc supports -c -o file.o
-configure:8298: result: yes
-configure:8324: checking whether the gcc linker (/usr/i586-suse-linux/bin/ld) supports shared libraries
-configure:9127: result: yes
-configure:9149: checking whether -lc should be explicitly linked in
-configure:9154: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-conftest.c:1: warning: `dummy' defined but not used
-configure:9157: $? = 0
-configure:9171: gcc -shared conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
-configure:9174: $? = 0
-configure:9186: result: no
-configure:9192: checking how to hardcode library paths into programs
-configure:9216: result: immediate
-configure:9230: checking whether stripping libraries is possible
-configure:9235: result: yes
-configure:9242: checking dynamic linker characteristics
-configure:9694: result: GNU/Linux ld.so
-configure:10423: checking if libtool supports shared libraries
-configure:10425: result: yes
-configure:10428: checking whether to build shared libraries
-configure:10449: result: yes
-configure:10452: checking whether to build static libraries
-configure:10456: result: no
-configure:10535: creating libtool
-configure:11260: checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries
-configure:11945: result: yes
-configure:11962: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common  conftest.cc >&5
-configure:11965: $? = 0
-configure:12065: checking for g++ option to produce PIC
-configure:12307: result: -fPIC
-configure:12314: checking if g++ PIC flag -fPIC works
-configure:12338: result: yes
-configure:12362: checking if g++ supports -c -o file.o
-configure:12403: result: yes
-configure:12429: checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries
-configure:12451: result: yes
-configure:12473: checking whether -lc should be explicitly linked in
-configure:12478: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common  conftest.cc >&5
-conftest.cc:1: warning: `int dummy' defined but not used
-configure:12481: $? = 0
-configure:12495: g++ -shared -nostdlib  conftest.o   -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
-configure:12498: $? = 1
-configure:12510: result: yes
-configure:12516: checking how to hardcode library paths into programs
-configure:12540: result: immediate
-configure:12554: checking whether stripping libraries is possible
-configure:12559: result: yes
-configure:12566: checking dynamic linker characteristics
-configure:13018: result: GNU/Linux ld.so
-configure:14163: checking if gcj supports -fno-rtti -fno-exceptions
-configure:14187: result: no
-configure:14202: checking for gcj option to produce PIC
-configure:14363: result: -fPIC
-configure:14370: checking if gcj PIC flag -fPIC works
-configure:14394: result: no
-configure:14418: checking if gcj supports -c -o file.o
-configure:14459: result: no
-configure:14485: checking whether the gcj linker (/usr/i586-suse-linux/bin/ld) supports shared libraries
-configure:15288: result: yes
-configure:15310: checking whether -lc should be explicitly linked in
-configure:15315: gcj -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.java >&5
-gcj: can't specify `-D' without `--main'
-
-configure:15318: $? = 1
-configure:15347: result: yes
-configure:15353: checking how to hardcode library paths into programs
-configure:15377: result: immediate
-configure:15391: checking whether stripping libraries is possible
-configure:15396: result: yes
-configure:15403: checking dynamic linker characteristics
-configure:15855: result: GNU/Linux ld.so
-configure:17476: checking for msgfmt
-configure:17503: result: /usr/bin/msgfmt
-configure:17512: checking for gmsgfmt
-configure:17543: result: /usr/bin/msgfmt
-configure:17562: checking for xgettext
-configure:17589: result: /usr/bin/xgettext
-configure:17683: checking for strlcat
-configure:17731: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -pedantic-errors  conftest.cc >&5
-conftest.cc: In function `int main()':
-conftest.cc:37: error: `strlcat' undeclared (first use this function)
-conftest.cc:37: error: (Each undeclared identifier is reported only once for 
-   each function it appears in.)
-configure:17737: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| /* end confdefs.h.  */
-| 
-| 
-| #include <string.h>
-| 
-| 
-| int
-| main ()
-| {
-| 
-|  char buf[20];
-|   buf[0]='\0';
-|   strlcat(buf, "KDE function test", sizeof(buf));
-| 
-| 
-|   ;
-|   return 0;
-| }
-configure:17772: result: no
-configure:17775: checking if strlcat needs custom prototype
-configure:17879: result: yes - in libtdefakes
-configure:17904: checking for strlcpy
-configure:17951: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -pedantic-errors  conftest.cc >&5
-conftest.cc: In function `int main()':
-conftest.cc:36: error: `strlcpy' undeclared (first use this function)
-conftest.cc:36: error: (Each undeclared identifier is reported only once for 
-   each function it appears in.)
-configure:17957: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| /* end confdefs.h.  */
-| 
-| 
-| #include <string.h>
-| 
-| 
-| int
-| main ()
-| {
-| 
-|  char buf[20];
-|   strlcpy(buf, "KDE function test", sizeof(buf));
-| 
-| 
-|   ;
-|   return 0;
-| }
-configure:17992: result: no
-configure:17995: checking if strlcpy needs custom prototype
-configure:18098: result: yes - in libtdefakes
-configure:18128: checking for main in -lutil
-configure:18152: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -lutil   >&5
-configure:18158: $? = 0
-configure:18162: test -z 
-			 || test ! -s conftest.err
-configure:18165: $? = 0
-configure:18168: test -s conftest
-configure:18171: $? = 0
-configure:18184: result: yes
-configure:18190: checking for main in -lcompat
-configure:18214: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -lcompat   >&5
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -lcompat
-collect2: ld returned 1 exit status
-configure:18220: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| /* end confdefs.h.  */
-| 
-| 
-| int
-| main ()
-| {
-| main ();
-|   ;
-|   return 0;
-| }
-configure:18246: result: no
-configure:18253: checking for crypt in -lcrypt
-configure:18283: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -lcrypt   >&5
-configure:18289: $? = 0
-configure:18293: test -z 
-			 || test ! -s conftest.err
-configure:18296: $? = 0
-configure:18299: test -s conftest
-configure:18302: $? = 0
-configure:18315: result: yes
-configure:18409: checking for socklen_t
-configure:18448: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common  conftest.cc >&5
-configure:18454: $? = 0
-configure:18458: test -z 
-			 || test ! -s conftest.err
-configure:18461: $? = 0
-configure:18464: test -s conftest.o
-configure:18467: $? = 0
-configure:18539: result: socklen_t
-configure:18561: checking for dnet_ntoa in -ldnet
-configure:18591: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -ldnet   >&5
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ldnet
-collect2: ld returned 1 exit status
-configure:18597: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| /* end confdefs.h.  */
-| 
-| /* Override any gcc2 internal prototype to avoid an error.  */
-| #ifdef __cplusplus
-| extern "C"
-| #endif
-| /* We use char because int might match the return type of a gcc2
-|    builtin and then its argument prototype would still apply.  */
-| char dnet_ntoa ();
-| int
-| main ()
-| {
-| dnet_ntoa ();
-|   ;
-|   return 0;
-| }
-configure:18623: result: no
-configure:18630: checking for dnet_ntoa in -ldnet_stub
-configure:18660: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -ldnet_stub   >&5
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ldnet_stub
-collect2: ld returned 1 exit status
-configure:18666: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| /* end confdefs.h.  */
-| 
-| /* Override any gcc2 internal prototype to avoid an error.  */
-| #ifdef __cplusplus
-| extern "C"
-| #endif
-| /* We use char because int might match the return type of a gcc2
-|    builtin and then its argument prototype would still apply.  */
-| char dnet_ntoa ();
-| int
-| main ()
-| {
-| dnet_ntoa ();
-|   ;
-|   return 0;
-| }
-configure:18692: result: no
-configure:18699: checking for inet_ntoa
-configure:18756: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-configure:18762: $? = 0
-configure:18766: test -z 
-			 || test ! -s conftest.err
-configure:18769: $? = 0
-configure:18772: test -s conftest
-configure:18775: $? = 0
-configure:18787: result: yes
-configure:18860: checking for connect
-configure:18917: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-configure:18923: $? = 0
-configure:18927: test -z 
-			 || test ! -s conftest.err
-configure:18930: $? = 0
-configure:18933: test -s conftest
-configure:18936: $? = 0
-configure:18948: result: yes
-configure:19022: checking for remove
-configure:19079: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-configure:19085: $? = 0
-configure:19089: test -z 
-			 || test ! -s conftest.err
-configure:19092: $? = 0
-configure:19095: test -s conftest
-configure:19098: $? = 0
-configure:19110: result: yes
-configure:19185: checking for shmat
-configure:19242: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-configure:19248: $? = 0
-configure:19252: test -z 
-			 || test ! -s conftest.err
-configure:19255: $? = 0
-configure:19258: test -s conftest
-configure:19261: $? = 0
-configure:19273: result: yes
-configure:19364: checking crt_externs.h usability
-configure:19376: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-conftest.c:62:25: crt_externs.h: No such file or directory
-configure:19382: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| /* end confdefs.h.  */
-| #include <stdio.h>
-| #if HAVE_SYS_TYPES_H
-| # include <sys/types.h>
-| #endif
-| #if HAVE_SYS_STAT_H
-| # include <sys/stat.h>
-| #endif
-| #if STDC_HEADERS
-| # include <stdlib.h>
-| # include <stddef.h>
-| #else
-| # if HAVE_STDLIB_H
-| #  include <stdlib.h>
-| # endif
-| #endif
-| #if HAVE_STRING_H
-| # if !STDC_HEADERS && HAVE_MEMORY_H
-| #  include <memory.h>
-| # endif
-| # include <string.h>
-| #endif
-| #if HAVE_STRINGS_H
-| # include <strings.h>
-| #endif
-| #if HAVE_INTTYPES_H
-| # include <inttypes.h>
-| #else
-| # if HAVE_STDINT_H
-| #  include <stdint.h>
-| # endif
-| #endif
-| #if HAVE_UNISTD_H
-| # include <unistd.h>
-| #endif
-| #include <crt_externs.h>
-configure:19405: result: no
-configure:19409: checking crt_externs.h presence
-configure:19419: gcc -E  conftest.c
-conftest.c:28:25: crt_externs.h: No such file or directory
-configure:19425: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| /* end confdefs.h.  */
-| #include <crt_externs.h>
-configure:19445: result: no
-configure:19480: checking for crt_externs.h
-configure:19487: result: no
-configure:19500: checking for _NSGetEnviron
-configure:19557: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-/tmp/ccSZFgpz.o(.text+0x11): In function `main':
-: undefined reference to `_NSGetEnviron'
-/tmp/ccSZFgpz.o(.data+0x0): undefined reference to `_NSGetEnviron'
-collect2: ld returned 1 exit status
-configure:19563: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| /* end confdefs.h.  */
-| /* Define _NSGetEnviron to an innocuous variant, in case <limits.h> declares _NSGetEnviron.
-|    For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-| #define _NSGetEnviron innocuous__NSGetEnviron
-| 
-| /* System header to define __stub macros and hopefully few prototypes,
-|     which can conflict with char _NSGetEnviron (); below.
-|     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-|     <limits.h> exists even on freestanding compilers.  */
-| 
-| #ifdef __STDC__
-| # include <limits.h>
-| #else
-| # include <assert.h>
-| #endif
-| 
-| #undef _NSGetEnviron
-| 
-| /* Override any gcc2 internal prototype to avoid an error.  */
-| #ifdef __cplusplus
-| extern "C"
-| {
-| #endif
-| /* We use char because int might match the return type of a gcc2
-|    builtin and then its argument prototype would still apply.  */
-| char _NSGetEnviron ();
-| /* The GNU C library defines this for functions which it implements
-|     to always fail with ENOSYS.  Some functions are actually named
-|     something starting with __ and the normal name is an alias.  */
-| #if defined (__stub__NSGetEnviron) || defined (__stub____NSGetEnviron)
-| choke me
-| #else
-| char (*f) () = _NSGetEnviron;
-| #endif
-| #ifdef __cplusplus
-| }
-| #endif
-| 
-| int
-| main ()
-| {
-| return f != _NSGetEnviron;
-|   ;
-|   return 0;
-| }
-configure:19588: result: no
-configure:19606: checking for sys/types.h
-configure:19611: result: yes
-configure:19606: checking for stdint.h
-configure:19611: result: yes
-configure:19753: checking for poll in -lpoll
-configure:19783: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -lpoll   >&5
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -lpoll
-collect2: ld returned 1 exit status
-configure:19789: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_STDINT_H 1
-| /* end confdefs.h.  */
-| 
-| /* Override any gcc2 internal prototype to avoid an error.  */
-| #ifdef __cplusplus
-| extern "C"
-| #endif
-| /* We use char because int might match the return type of a gcc2
-|    builtin and then its argument prototype would still apply.  */
-| char poll ();
-| int
-| main ()
-| {
-| poll ();
-|   ;
-|   return 0;
-| }
-configure:19815: result: no
-configure:19833: checking CoreAudio/CoreAudio.h usability
-configure:19845: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-conftest.c:64:33: CoreAudio/CoreAudio.h: No such file or directory
-configure:19851: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_STDINT_H 1
-| /* end confdefs.h.  */
-| #include <stdio.h>
-| #if HAVE_SYS_TYPES_H
-| # include <sys/types.h>
-| #endif
-| #if HAVE_SYS_STAT_H
-| # include <sys/stat.h>
-| #endif
-| #if STDC_HEADERS
-| # include <stdlib.h>
-| # include <stddef.h>
-| #else
-| # if HAVE_STDLIB_H
-| #  include <stdlib.h>
-| # endif
-| #endif
-| #if HAVE_STRING_H
-| # if !STDC_HEADERS && HAVE_MEMORY_H
-| #  include <memory.h>
-| # endif
-| # include <string.h>
-| #endif
-| #if HAVE_STRINGS_H
-| # include <strings.h>
-| #endif
-| #if HAVE_INTTYPES_H
-| # include <inttypes.h>
-| #else
-| # if HAVE_STDINT_H
-| #  include <stdint.h>
-| # endif
-| #endif
-| #if HAVE_UNISTD_H
-| # include <unistd.h>
-| #endif
-| #include <CoreAudio/CoreAudio.h>
-configure:19874: result: no
-configure:19878: checking CoreAudio/CoreAudio.h presence
-configure:19888: gcc -E  conftest.c
-conftest.c:30:33: CoreAudio/CoreAudio.h: No such file or directory
-configure:19894: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_STDINT_H 1
-| /* end confdefs.h.  */
-| #include <CoreAudio/CoreAudio.h>
-configure:19914: result: no
-configure:19949: checking for CoreAudio/CoreAudio.h
-configure:19956: result: no
-configure:19974: checking if res_init needs -lresolv
-configure:20001: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c   -lresolv >&5
-configure:20007: $? = 0
-configure:20011: test -z 
-			 || test ! -s conftest.err
-configure:20014: $? = 0
-configure:20017: test -s conftest
-configure:20020: $? = 0
-configure:20024: result: yes
-configure:20045: checking if res_init is available
-configure:20070: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:20076: $? = 0
-configure:20080: test -z 
-			 || test ! -s conftest.err
-configure:20083: $? = 0
-configure:20086: test -s conftest.o
-configure:20089: $? = 0
-configure:20092: result: yes
-configure:20115: checking for killpg in -lucb
-configure:20145: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -lucb   >&5
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -lucb
-collect2: ld returned 1 exit status
-configure:20151: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_RES_INIT 1
-| #define HAVE_RES_INIT 1
-| /* end confdefs.h.  */
-| 
-| /* Override any gcc2 internal prototype to avoid an error.  */
-| #ifdef __cplusplus
-| extern "C"
-| #endif
-| /* We use char because int might match the return type of a gcc2
-|    builtin and then its argument prototype would still apply.  */
-| char killpg ();
-| int
-| main ()
-| {
-| killpg ();
-|   ;
-|   return 0;
-| }
-configure:20177: result: no
-configure:20260: checking for int
-configure:20284: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:20290: $? = 0
-configure:20294: test -z 
-			 || test ! -s conftest.err
-configure:20297: $? = 0
-configure:20300: test -s conftest.o
-configure:20303: $? = 0
-configure:20314: result: yes
-configure:20317: checking size of int
-configure:20636: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-conftest.c:66: warning: no previous prototype for `longval'
-conftest.c:67: warning: no previous prototype for `ulongval'
-configure:20639: $? = 0
-configure:20641: ./conftest
-configure:20644: $? = 0
-configure:20667: result: 4
-configure:20673: checking for long
-configure:20697: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:20703: $? = 0
-configure:20707: test -z 
-			 || test ! -s conftest.err
-configure:20710: $? = 0
-configure:20713: test -s conftest.o
-configure:20716: $? = 0
-configure:20727: result: yes
-configure:20730: checking size of long
-configure:21049: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-conftest.c:67: warning: no previous prototype for `longval'
-conftest.c:68: warning: no previous prototype for `ulongval'
-configure:21052: $? = 0
-configure:21054: ./conftest
-configure:21057: $? = 0
-configure:21080: result: 4
-configure:21086: checking for char *
-configure:21110: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:21116: $? = 0
-configure:21120: test -z 
-			 || test ! -s conftest.err
-configure:21123: $? = 0
-configure:21126: test -s conftest.o
-configure:21129: $? = 0
-configure:21140: result: yes
-configure:21143: checking size of char *
-configure:21462: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-conftest.c:68: warning: no previous prototype for `longval'
-conftest.c:69: warning: no previous prototype for `ulongval'
-configure:21465: $? = 0
-configure:21467: ./conftest
-configure:21470: $? = 0
-configure:21493: result: 4
-configure:21501: checking for dlopen in -ldl
-configure:21531: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -ldl   >&5
-configure:21537: $? = 0
-configure:21541: test -z 
-			 || test ! -s conftest.err
-configure:21544: $? = 0
-configure:21547: test -s conftest
-configure:21550: $? = 0
-configure:21563: result: yes
-configure:21573: checking for shl_unload in -ldld
-configure:21603: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -ldld   >&5
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ldld
-collect2: ld returned 1 exit status
-configure:21609: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_RES_INIT 1
-| #define HAVE_RES_INIT 1
-| #define SIZEOF_INT 4
-| #define SIZEOF_LONG 4
-| #define SIZEOF_CHAR_P 4
-| /* end confdefs.h.  */
-| 
-| /* Override any gcc2 internal prototype to avoid an error.  */
-| #ifdef __cplusplus
-| extern "C"
-| #endif
-| /* We use char because int might match the return type of a gcc2
-|    builtin and then its argument prototype would still apply.  */
-| char shl_unload ();
-| int
-| main ()
-| {
-| shl_unload ();
-|   ;
-|   return 0;
-| }
-configure:21635: result: no
-configure:21650: checking for size_t
-configure:21674: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:21680: $? = 0
-configure:21684: test -z 
-			 || test ! -s conftest.err
-configure:21687: $? = 0
-configure:21690: test -s conftest.o
-configure:21693: $? = 0
-configure:21704: result: yes
-configure:21707: checking size of size_t
-configure:22026: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-conftest.c:69: warning: no previous prototype for `longval'
-conftest.c:70: warning: no previous prototype for `ulongval'
-configure:22029: $? = 0
-configure:22031: ./conftest
-configure:22034: $? = 0
-configure:22057: result: 4
-configure:22064: checking for unsigned long
-configure:22088: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:22094: $? = 0
-configure:22098: test -z 
-			 || test ! -s conftest.err
-configure:22101: $? = 0
-configure:22104: test -s conftest.o
-configure:22107: $? = 0
-configure:22118: result: yes
-configure:22121: checking size of unsigned long
-configure:22440: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-conftest.c:70: warning: no previous prototype for `longval'
-conftest.c:71: warning: no previous prototype for `ulongval'
-configure:22443: $? = 0
-configure:22445: ./conftest
-configure:22448: $? = 0
-configure:22471: result: 4
-configure:22479: checking sizeof size_t == sizeof unsigned long
-configure:22501: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute  conftest.c >&5
-configure:22507: $? = 0
-configure:22511: test -z 
-			 || test ! -s conftest.err
-configure:22514: $? = 0
-configure:22517: test -s conftest.o
-configure:22520: $? = 0
-configure:22522: result: yes
-configure:22553: checking for vsnprintf
-configure:22610: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-configure:22616: $? = 0
-configure:22620: test -z 
-			 || test ! -s conftest.err
-configure:22623: $? = 0
-configure:22626: test -s conftest
-configure:22629: $? = 0
-configure:22641: result: yes
-configure:22553: checking for snprintf
-configure:22610: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c  >&5
-configure:22616: $? = 0
-configure:22620: test -z 
-			 || test ! -s conftest.err
-configure:22623: $? = 0
-configure:22626: test -s conftest
-configure:22629: $? = 0
-configure:22641: result: yes
-configure:22679: checking for X
-configure:22724: gcc -E  conftest.c
-configure:22730: $? = 0
-configure:22821: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -lXt  >&5
-conftest.c: In function `main':
-conftest.c:43: warning: implicit declaration of function `XtMalloc'
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -lXt
-collect2: ld returned 1 exit status
-configure:22827: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_RES_INIT 1
-| #define HAVE_RES_INIT 1
-| #define SIZEOF_INT 4
-| #define SIZEOF_LONG 4
-| #define SIZEOF_CHAR_P 4
-| #define SIZEOF_SIZE_T 4
-| #define SIZEOF_UNSIGNED_LONG 4
-| #define HAVE_VSNPRINTF 1
-| #define HAVE_SNPRINTF 1
-| /* end confdefs.h.  */
-| 
-| int
-| main ()
-| {
-| XtMalloc()
-|   ;
-|   return 0;
-| }
-configure:22986: result: libraries /usr/X11R6/lib, headers /usr/X11R6/include
-configure:23020: checking for IceConnectionNumber in -lICE
-configure:23050: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   -L/usr/X11R6/lib conftest.c -lICE   >&5
-configure:23056: $? = 0
-configure:23060: test -z 
-			 || test ! -s conftest.err
-configure:23063: $? = 0
-configure:23066: test -s conftest
-configure:23069: $? = 0
-configure:23082: result: yes
-configure:23096: checking for libXext
-configure:23131: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   -L/usr/X11R6/lib  conftest.c -lXext -lX11  >&5
-configure:23137: $? = 0
-configure:23141: test -z 
-			 || test ! -s conftest.err
-configure:23144: $? = 0
-configure:23147: test -s conftest
-configure:23150: $? = 0
-configure:23169: result: yes
-configure:23218: checking for pthread_create in -lpthread
-configure:23248: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute   conftest.c -lpthread   >&5
-configure:23254: $? = 0
-configure:23258: test -z 
-			 || test ! -s conftest.err
-configure:23261: $? = 0
-configure:23264: test -s conftest
-configure:23267: $? = 0
-configure:23280: result: yes
-configure:23738: checking for extra includes
-configure:23766: result: no
-configure:23770: checking for extra libs
-configure:23799: result: no
-configure:23805: checking for libz
-configure:23846: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute -I/usr/X11R6/include   -D_REENTRANT  conftest.c -L/usr/X11R6/lib  -lz  >&5
-configure:23852: $? = 0
-configure:23856: test -z 
-			 || test ! -s conftest.err
-configure:23859: $? = 0
-configure:23862: test -s conftest
-configure:23865: $? = 0
-configure:23887: result: -lz
-configure:23908: checking for libpng
-configure:23950: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute -I/usr/X11R6/include   -D_REENTRANT  conftest.c  -L/usr/X11R6/lib  -lpng -lz -lm -lX11  >&5
-configure:23956: $? = 0
-configure:23960: test -z 
-			 || test ! -s conftest.err
-configure:23963: $? = 0
-configure:23966: test -s conftest
-configure:23969: $? = 0
-configure:23993: result: -lpng -lz -lm
-configure:24004: checking for libjpeg6b
-configure:24050: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute -I/usr/X11R6/include   -D_REENTRANT  conftest.c -L/usr/X11R6/lib  -ljpeg6b -lm >&5
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ljpeg6b
-collect2: ld returned 1 exit status
-configure:24056: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME ""
-| #define PACKAGE_TARNAME ""
-| #define PACKAGE_VERSION ""
-| #define PACKAGE_STRING ""
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "mallory"
-| #define VERSION "1.0"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define KDELIBSUFF ""
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define HAVE_CRYPT 1
-| #define ksize_t socklen_t
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_RES_INIT 1
-| #define HAVE_RES_INIT 1
-| #define SIZEOF_INT 4
-| #define SIZEOF_LONG 4
-| #define SIZEOF_CHAR_P 4
-| #define SIZEOF_SIZE_T 4
-| #define SIZEOF_UNSIGNED_LONG 4
-| #define HAVE_VSNPRINTF 1
-| #define HAVE_SNPRINTF 1
-| #define HAVE_LIBZ 1
-| #define HAVE_LIBPNG 1
-| /* end confdefs.h.  */
-| /* Override any gcc2 internal prototype to avoid an error.  */
-| struct jpeg_decompress_struct;
-| typedef struct jpeg_decompress_struct * j_decompress_ptr;
-| typedef int size_t;
-| #ifdef __cplusplus
-| extern "C" {
-| #endif
-|     void jpeg_CreateDecompress(j_decompress_ptr cinfo,
-|                                     int version, size_t structsize);
-| #ifdef __cplusplus
-| }
-| #endif
-| /* We use char because int might match the return type of a gcc2
-|     builtin and then its argument prototype would still apply.  */
-| 
-| int
-| main ()
-| {
-| jpeg_CreateDecompress(0L, 0, 0);
-|   ;
-|   return 0;
-| }
-configure:24091: result: no
-configure:24094: checking for libjpeg
-configure:24140: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute -I/usr/X11R6/include   -D_REENTRANT  conftest.c -L/usr/X11R6/lib  -ljpeg -lm >&5
-configure:24146: $? = 0
-configure:24150: test -z 
-			 || test ! -s conftest.err
-configure:24153: $? = 0
-configure:24156: test -s conftest
-configure:24159: $? = 0
-configure:24178: result: -ljpeg
-configure: 24202: ${prefix}/include/jpeglib.h
-configure: 24202: /usr/include/jpeglib.h
-taking that
-configure:24375: checking for Qt
-configure: 24440: /usr/lib/qt3/include/ntqstyle.h
-taking that
-tried NO
-configure:24552: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -I/usr/lib/qt3/include -I/usr/X11R6/include  -DQT_THREAD_SUPPORT  -D_REENTRANT  -L/usr/lib/qt3/lib -L/usr/X11R6/lib   conftest.cc  -ltqt-mt -lpng -lz -lm -ljpeg -ldl  -lXext -lX11 -lSM -lICE  -lpthread 1>&5
-configure:24555: $? = 0
-configure:24614: result: libraries /usr/lib/qt3/lib, headers /usr/lib/qt3/include using -mt
-configure:24624: checking if Qt compiles without flags
-configure:24721: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -I/usr/lib/qt3/include  -DQT_THREAD_SUPPORT  -D_REENTRANT  -L/usr/X11R6/lib conftest.cc -ltqt-mt -lpng -lz -lm -ljpeg -ldl  -lXext -lX11 -lSM -lICE  -lXext -lX11  1>&5
-/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ltqt-mt
-collect2: ld returned 1 exit status
-configure:24724: $? = 1
-configure: failed program was:
-#include "confdefs.h"
-#include <ntqglobal.h>
-#include <ntqapplication.h>
-#include <ntqcursor.h>
-#include <ntqstylefactory.h>
-#include <private/qucomextra_p.h>
-#if ! (TQT_VERSION >= 0x030100)
-#error 1
-#endif
-
-int main() {
-    (void)QStyleFactory::create(QString::null);
-    QCursor c(Qt::WhatsThisCursor);
-    return 0;
-}
-configure:24757: result: no
-configure:24795: checking for moc
-configure:24864: result: /usr/lib/qt3/bin/moc
-configure:24872: checking for uic
-configure:24923: result: /usr/lib/qt3/bin/uic
-configure:24951: checking whether uic supports -L 
-configure:24962: /usr/lib/qt3/bin/uic -L /nonexistant conftest.ui >/dev/null
-configure:24965: $? = 0
-configure:24977: result: yes
-configure:24989: checking whether uic supports -nounload 
-configure:25000: /usr/lib/qt3/bin/uic -nounload  conftest.ui >/dev/null
-configure:25003: $? = 0
-configure:25015: result: yes
-configure:25052: checking if Qt needs -ljpeg
-configure:25093: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -I/usr/lib/qt3/include -I/usr/X11R6/include   -DQT_THREAD_SUPPORT  -D_REENTRANT  conftest.cc -L/usr/X11R6/lib -L/usr/lib/qt3/lib -ltqt-mt -lpng -lz -lm  -ldl -lXext -lX11 -lSM -lICE 1>&5
-conftest.cc: In function `int main()':
-conftest.cc:49: warning: `char**argv' might be used uninitialized in this 
-   function
-configure:25099: $? = 0
-configure:25103: test -z 
-			 || test ! -s conftest.err
-configure:25106: $? = 0
-configure:25109: test -s conftest
-configure:25112: $? = 0
-configure:25141: result: no
-configure:25167: checking for rpath
-configure:25195: result: yes
-configure:25198: checking for KDE
-configure: 25246: /opt/kde3/include/ksharedptr.h
-taking that
-configure: 25276: /opt/kde3/lib/libtdeio.la
-taking that
-configure: 25294: /opt/kde3/lib/kde3/plugins/designer/tdewidgets.la
-taking that
-configure:25367: result: libraries /opt/kde3/lib, headers /opt/kde3/include
-configure:25406: checking if UIC has KDE plugins available
-configure:25433: /usr/lib/qt3/bin/uic -L /opt/kde3/lib/kde3/plugins/designer -nounload -impl actest.h actest.ui > actest.cpp
-configure:25436: $? = 0
-configure:25447: result: yes
-configure:25486: checking for KDE paths
-configure:26073: result: defaults
-configure:26112: checking for dcopidl
-configure:26171: result: /opt/kde3/bin/dcopidl
-configure:26178: checking for dcopidl2cpp
-configure:26237: result: /opt/kde3/bin/dcopidl2cpp
-configure:26245: checking for mcopidl
-configure:26304: result: /opt/kde3/bin/mcopidl
-configure:26311: checking for artsc-config
-configure:26370: result: /opt/kde3/bin/artsc-config
-configure:26378: checking for tde-config
-configure:26429: result: /opt/kde3/bin/tde-config
-configure:26436: checking for brockenboring
-configure:26483: result: not found
-configure:26554: checking for meinproc
-configure:26605: result: /opt/kde3/bin/meinproc
-configure: 26621: /opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl
-taking that
-configure:26791: checking if colorscheme should be compiled
-configure:26803: result: yes
-configure:26791: checking if malloryclient should be compiled
-configure:26803: result: yes
-configure:26933: creating ./config.status
-
-## ---------------------- ##
-## Running config.status. ##
-## ---------------------- ##
-
-This file was extended by config.status, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  CONFIG_FILES    = 
-  CONFIG_HEADERS  = 
-  CONFIG_LINKS    = 
-  CONFIG_COMMANDS = 
-  $ ./config.status 
-
-on tinbox
-
-config.status:703: creating config.h
-config.status:845: config.h is unchanged
-config.status:1009: executing depfiles commands
-
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-
-ac_cv_build=i686-pc-linux-gnu
-ac_cv_build_alias=i686-pc-linux-gnu
-ac_cv_c_compiler_gnu=yes
-ac_cv_cxx_compiler_gnu=yes
-ac_cv_env_CC_set=
-ac_cv_env_CC_value=
-ac_cv_env_CFLAGS_set=
-ac_cv_env_CFLAGS_value=
-ac_cv_env_CPPFLAGS_set=
-ac_cv_env_CPPFLAGS_value=
-ac_cv_env_CPP_set=
-ac_cv_env_CPP_value=
-ac_cv_env_CXXCPP_set=
-ac_cv_env_CXXCPP_value=
-ac_cv_env_CXXFLAGS_set=
-ac_cv_env_CXXFLAGS_value=
-ac_cv_env_CXX_set=
-ac_cv_env_CXX_value=
-ac_cv_env_LDFLAGS_set=
-ac_cv_env_LDFLAGS_value=
-ac_cv_env_build_alias_set=
-ac_cv_env_build_alias_value=
-ac_cv_env_host_alias_set=
-ac_cv_env_host_alias_value=
-ac_cv_env_target_alias_set=
-ac_cv_env_target_alias_value=
-ac_cv_exeext=
-ac_cv_func__NSGetEnviron=no
-ac_cv_func_connect=yes
-ac_cv_func_inet_ntoa=yes
-ac_cv_func_remove=yes
-ac_cv_func_shmat=yes
-ac_cv_func_snprintf=yes
-ac_cv_func_vsnprintf=yes
-ac_cv_have_dlfcn=yes
-ac_cv_have_kde='have_kde=yes     ac_kde_includes=/opt/kde3/include ac_kde_libraries=/opt/kde3/lib'
-ac_cv_have_qt='have_qt=yes     ac_qt_includes=/usr/lib/qt3/include ac_qt_libraries=/usr/lib/qt3/lib'
-ac_cv_header_CoreAudio_CoreAudio_h=no
-ac_cv_header_crt_externs_h=no
-ac_cv_header_dlfcn_h=yes
-ac_cv_header_inttypes_h=yes
-ac_cv_header_memory_h=yes
-ac_cv_header_stdc=yes
-ac_cv_header_stdint_h=yes
-ac_cv_header_stdlib_h=yes
-ac_cv_header_string_h=yes
-ac_cv_header_strings_h=yes
-ac_cv_header_sys_stat_h=yes
-ac_cv_header_sys_types_h=yes
-ac_cv_header_unistd_h=yes
-ac_cv_host=i686-pc-linux-gnu
-ac_cv_host_alias=i686-pc-linux-gnu
-ac_cv_lib_ICE_IceConnectionNumber=yes
-ac_cv_lib_compat_main=no
-ac_cv_lib_crypt_crypt=yes
-ac_cv_lib_dl_dlopen=yes
-ac_cv_lib_dld_shl_unload=no
-ac_cv_lib_dnet_dnet_ntoa=no
-ac_cv_lib_dnet_stub_dnet_ntoa=no
-ac_cv_lib_jpeg_6b=no
-ac_cv_lib_jpeg_normal=-ljpeg
-ac_cv_lib_png='-lpng -lz -lm'
-ac_cv_lib_poll_poll=no
-ac_cv_lib_pthread_pthread_create=yes
-ac_cv_lib_ucb_killpg=no
-ac_cv_lib_util_main=yes
-ac_cv_lib_z=-lz
-ac_cv_objext=o
-ac_cv_path_GMSGFMT=/usr/bin/msgfmt
-ac_cv_path_MSGFMT=/usr/bin/msgfmt
-ac_cv_path_XGETTEXT=/usr/bin/xgettext
-ac_cv_path_install='/usr/bin/install -c'
-ac_cv_prog_AWK=gawk
-ac_cv_prog_CPP='gcc -E'
-ac_cv_prog_CXXCPP='g++ -E'
-ac_cv_prog_ac_ct_CC=gcc
-ac_cv_prog_ac_ct_CXX=g++
-ac_cv_prog_ac_ct_RANLIB=ranlib
-ac_cv_prog_ac_ct_STRIP=strip
-ac_cv_prog_cc_g=yes
-ac_cv_prog_cc_stdc=
-ac_cv_prog_cxx_g=yes
-ac_cv_prog_egrep='grep -E'
-ac_cv_prog_make_make_set=yes
-ac_cv_sizeof_char_p=4
-ac_cv_sizeof_int=4
-ac_cv_sizeof_long=4
-ac_cv_sizeof_size_t=4
-ac_cv_sizeof_unsigned_long=4
-ac_cv_socklen_t=socklen_t
-ac_cv_target=i686-pc-linux-gnu
-ac_cv_target_alias=i686-pc-linux-gnu
-ac_cv_type_char_p=yes
-ac_cv_type_int=yes
-ac_cv_type_long=yes
-ac_cv_type_size_t=yes
-ac_cv_type_unsigned_long=yes
-am_cv_CC_dependencies_compiler_type=gcc3
-am_cv_CXX_dependencies_compiler_type=gcc3
-kde_cv_all_paths='kde_have_all_paths="yes" 	kde_htmldir="\${prefix}/share/doc/HTML" 	kde_appsdir="\${prefix}/share/applnk" 	kde_icondir="\${prefix}/share/icons" 	kde_sounddir="\${prefix}/share/sounds" 	kde_datadir="\${prefix}/share/apps" 	kde_locale="\${prefix}/share/locale" 	kde_cgidir="\${exec_prefix}/cgi-bin" 	kde_confdir="\${prefix}/share/config" 	kde_mimedir="\${prefix}/share/mimelnk" 	kde_toolbardir="\${prefix}/share/toolbar" 	kde_wallpaperdir="\${prefix}/share/wallpapers" 	kde_templatesdir="\${prefix}/share/templates" 	kde_bindir="\${exec_prefix}/bin" 	kde_servicesdir="\${prefix}/share/services" 	kde_servicetypesdir="\${prefix}/share/servicetypes" 	kde_moduledir="\${libdir}/kde3" 	kde_styledir="\${libdir}/kde3/plugins/styles" 	kde_widgetdir="/opt/kde3/lib/kde3/plugins/designer" 	xdg_appsdir="\${datadir}/applications" 	xdg_directorydir="\${datadir}/desktop-directories" 	kde_result=defaults'
-kde_cv_func_strlcat=no
-kde_cv_func_strlcpy=no
-kde_cv_have_libXext=yes
-kde_cv_have_x='have_x=yes          kde_x_includes=/usr/X11R6/include kde_x_libraries=/usr/X11R6/lib'
-kde_cv_path=/opt/kde3/bin/meinproc
-kde_cv_path_artsc_config=/opt/kde3/bin/artsc-config
-kde_cv_path_brockenboring=NONE
-kde_cv_path_dcopidl=/opt/kde3/bin/dcopidl
-kde_cv_path_dcopidl2cpp=/opt/kde3/bin/dcopidl2cpp
-kde_cv_path_kde_config=/opt/kde3/bin/tde-config
-kde_cv_path_mcopidl=/opt/kde3/bin/mcopidl
-kde_cv_path_meinproc=/opt/kde3/bin/meinproc
-kde_cv_path_moc=/usr/lib/qt3/bin/moc
-kde_cv_path_uic=/usr/lib/qt3/bin/uic
-kde_cv_prog_cxx_O0=yes
-kde_cv_prog_cxx_Wmissing_format_attribute=yes
-kde_cv_prog_cxx_Wno_long_long=yes
-kde_cv_prog_cxx_Wnon_virtual_dtor=yes
-kde_cv_prog_cxx_Wundef=yes
-kde_cv_prog_cxx_fexceptions=yes
-kde_cv_prog_cxx_fno_check_new=yes
-kde_cv_prog_cxx_fno_common=yes
-kde_cv_prog_cxx_fno_exceptions=yes
-kde_cv_prog_uic_L=yes
-kde_cv_prog_uic_nounload=yes
-kde_cv_proto_strlcat='yes - in libtdefakes'
-kde_cv_proto_strlcpy='yes - in libtdefakes'
-kde_cv_qt_direct=no
-kde_cv_qt_jpeg=no
-kde_cv_uic_plugins=yes
-lt_cv_deplibs_check_method=pass_all
-lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file='/lib/libc.so.6 /lib/libc-*.so'
-lt_cv_ld_reload_flag=-r
-lt_cv_objdir=.libs
-lt_cv_path_LD=/usr/i586-suse-linux/bin/ld
-lt_cv_path_NM='/usr/bin/nm -B'
-lt_cv_path_SED=/usr/bin/sed
-lt_cv_prog_compiler_c_o=yes
-lt_cv_prog_compiler_c_o_CXX=yes
-lt_cv_prog_compiler_c_o_GCJ=no
-lt_cv_prog_compiler_rtti_exceptions=no
-lt_cv_prog_gnu_ld=yes
-lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'\'''
-lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr) \&\2},/p'\'''
-lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\'''
-lt_cv_sys_max_cmd_len=32768
-lt_lt_cv_prog_compiler_c_o='"yes"'
-lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
-lt_lt_cv_prog_compiler_c_o_GCJ='"no"'
-lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'\''"'
-lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
-lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"'
-
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-
-ACLOCAL='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run aclocal-1.6'
-AMDEPBACKSLASH='\'
-AMDEP_FALSE='#'
-AMDEP_TRUE=''
-AMTAR='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run tar'
-ARTSCCONFIG='/opt/kde3/bin/artsc-config'
-AUTOCONF='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoconf'
-AUTODIRS=''
-AUTOHEADER='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoheader'
-AUTOMAKE='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run automake-1.6'
-AWK='gawk'
-BROCKENBORING=''
-CC='gcc'
-CCDEPMODE='depmode=gcc3'
-CFLAGS='-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute'
-CONF_FILES=' $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in'
-CPP='gcc -E'
-CPPFLAGS=' -DQT_THREAD_SUPPORT  -D_REENTRANT'
-CXX='g++'
-CXXCPP='g++ -E'
-CXXDEPMODE='depmode=gcc3'
-CXXFLAGS='-Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common'
-DCOPIDL2CPP='/opt/kde3/bin/dcopidl2cpp'
-DCOPIDL='/opt/kde3/bin/dcopidl'
-DCOP_DEPENDENCIES='$(DCOPIDL)'
-DEFS='-DHAVE_CONFIG_H'
-DEPDIR='.deps'
-ECHO='echo'
-ECHO_C=''
-ECHO_N='-n'
-ECHO_T=''
-EGREP='grep -E'
-EXEEXT=''
-FRAMEWORK_COREAUDIO=''
-GMSGFMT='/usr/bin/msgfmt'
-INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
-INSTALL_SCRIPT='${INSTALL}'
-INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
-KDECONFIG='/opt/kde3/bin/tde-config'
-KDE_EXTRA_RPATH=''
-KDE_INCLUDES='-I/opt/kde3/include'
-KDE_LDFLAGS='-L/opt/kde3/lib'
-KDE_MT_LDFLAGS=''
-KDE_MT_LIBS='-lpthread'
-KDE_NO_UNDEFINED=''
-KDE_PLUGIN='-avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS)'
-KDE_RPATH='-R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries)'
-KDE_USE_CLOSURE_FALSE='#'
-KDE_USE_CLOSURE_TRUE=''
-KDE_USE_FINAL_FALSE=''
-KDE_USE_FINAL_TRUE='#'
-KDE_USE_NMCHECK_FALSE=''
-KDE_USE_NMCHECK_TRUE='#'
-KDE_XSL_STYLESHEET='/opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl'
-LDFLAGS=''
-LIBCOMPAT=''
-LIBCRYPT='-lcrypt'
-LIBDL='-ldl'
-LIBJPEG='-ljpeg'
-LIBOBJS=''
-LIBPNG='-lpng -lz -lm'
-LIBPTHREAD='-lpthread'
-LIBRESOLV='-lresolv'
-LIBS=''
-LIBSM='-lSM -lICE'
-LIBSOCKET=''
-LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent'
-LIBUCB=''
-LIBUTIL='-lutil'
-LIBZ='-lz'
-LIB_KAB='-lkab'
-LIB_KABC='-ltdeabc'
-LIB_TDECORE='-ltdecore'
-LIB_TDEPRINT='-ltdeprint'
-LIB_TDEUI='-ltdeui'
-LIB_KFILE='-ltdeio'
-LIB_KFM=''
-LIB_TDEHTML='-ltdehtml'
-LIB_TDEIO='-ltdeio'
-LIB_TDEPARTS='-ltdeparts'
-LIB_TDESPELL='-ltdespell'
-LIB_TDESYCOCA='-ltdeio'
-LIB_POLL=''
-LIB_QPE=''
-LIB_QT='-ltqt-mt  $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread'
-LIB_SMB='-lsmb'
-LIB_X11='-lX11 $(LIBSOCKET)'
-LIB_XEXT='-lXext'
-LN_S='ln -s'
-LTLIBOBJS=''
-MAKEINFO='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run makeinfo'
-MCOPIDL='/opt/kde3/bin/mcopidl'
-MEINPROC='/opt/kde3/bin/meinproc'
-MOC='/usr/lib/qt3/bin/moc'
-MSGFMT='/usr/bin/msgfmt'
-NOOPT_CFLAGS='-O0'
-NOOPT_CXXFLAGS='-O0'
-OBJEXT='o'
-PACKAGE='mallory'
-PACKAGE_BUGREPORT=''
-PACKAGE_NAME=''
-PACKAGE_STRING=''
-PACKAGE_TARNAME=''
-PACKAGE_VERSION=''
-PATH_SEPARATOR=':'
-QTE_NORTTI=''
-QT_INCLUDES='-I/usr/lib/qt3/include'
-QT_LDFLAGS='-L/usr/lib/qt3/lib'
-RANLIB='ranlib'
-SET_MAKE=''
-SHELL='/bin/sh'
-STRIP='strip'
-TOPSUBDIRS=' colorscheme malloryclient'
-UIC='/usr/lib/qt3/bin/uic -L $(kde_widgetdir) -nounload'
-UIC_TR='tr2i18n'
-USER_INCLUDES=''
-USER_LDFLAGS=''
-USE_EXCEPTIONS='-fexceptions'
-USE_RTTI=''
-USE_THREADS=''
-VERSION='1.0'
-WOVERLOADED_VIRTUAL=''
-XGETTEXT='/usr/bin/xgettext'
-X_EXTRA_LIBS=''
-X_INCLUDES='-I/usr/X11R6/include'
-X_LDFLAGS='-L/usr/X11R6/lib'
-X_PRE_LIBS=''
-X_RPATH='-R $(x_libraries)'
-ac_ct_CC='gcc'
-ac_ct_CXX='g++'
-ac_ct_RANLIB='ranlib'
-ac_ct_STRIP='strip'
-all_includes='-I/opt/kde3/include -I/usr/lib/qt3/include -I/usr/X11R6/include '
-all_libraries='-L/usr/X11R6/lib -L/usr/lib/qt3/lib -L/opt/kde3/lib '
-am__include='include'
-am__quote=''
-bindir='${exec_prefix}/bin'
-build='i686-pc-linux-gnu'
-build_alias=''
-build_cpu='i686'
-build_os='linux-gnu'
-build_vendor='pc'
-datadir='${prefix}/share'
-exec_prefix='${prefix}'
-host='i686-pc-linux-gnu'
-host_alias=''
-host_cpu='i686'
-host_os='linux-gnu'
-host_vendor='pc'
-include_ARTS_FALSE='#'
-include_ARTS_TRUE=''
-includedir='${prefix}/include'
-infodir='${prefix}/info'
-install_sh='/stack/archives/kde-plus/window.decorations/mallory-1.0/admin/install-sh'
-kde_appsdir='${prefix}/share/applnk'
-kde_bindir='${exec_prefix}/bin'
-kde_confdir='${prefix}/share/config'
-kde_datadir='${prefix}/share/apps'
-kde_htmldir='${prefix}/share/doc/HTML'
-kde_icondir='${prefix}/share/icons'
-kde_includes='/opt/kde3/include'
-kde_libraries='/opt/kde3/lib'
-kde_libs_htmldir='/opt/kde3/share/doc/HTML'
-kde_libs_prefix='/opt/kde3'
-kde_locale='${prefix}/share/locale'
-kde_mimedir='${prefix}/share/mimelnk'
-kde_moduledir='${libdir}/kde3'
-kde_qtver='3'
-kde_servicesdir='${prefix}/share/services'
-kde_servicetypesdir='${prefix}/share/servicetypes'
-kde_sounddir='${prefix}/share/sounds'
-kde_styledir='${libdir}/kde3/plugins/styles'
-kde_templatesdir='${prefix}/share/templates'
-kde_wallpaperdir='${prefix}/share/wallpapers'
-kde_widgetdir='/opt/kde3/lib/kde3/plugins/designer'
-tdeinitdir='$(kde_moduledir)'
-libdir='${exec_prefix}/lib'
-libexecdir='${exec_prefix}/libexec'
-localstatedir='${prefix}/var'
-mandir='${prefix}/man'
-oldincludedir='/usr/include'
-prefix='/opt/kde3'
-program_transform_name='s,x,x,'
-qt_includes='/usr/lib/qt3/include'
-qt_libraries='/usr/lib/qt3/lib'
-sbindir='${exec_prefix}/sbin'
-sharedstatedir='${prefix}/com'
-sysconfdir='${prefix}/etc'
-target='i686-pc-linux-gnu'
-target_alias=''
-target_cpu='i686'
-target_os='linux-gnu'
-target_vendor='pc'
-x_includes='/usr/X11R6/include'
-x_libraries='/usr/X11R6/lib'
-xdg_appsdir='${datadir}/applications'
-xdg_directorydir='${datadir}/desktop-directories'
-
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-
-#define HAVE_CRYPT 1
-#define HAVE_DLFCN_H 1
-#define HAVE_INTTYPES_H 1
-#define HAVE_LIBJPEG 1
-#define HAVE_LIBPNG 1
-#define HAVE_LIBPTHREAD 1
-#define HAVE_LIBZ 1
-#define HAVE_MEMORY_H 1
-#define HAVE_RES_INIT 1
-#define HAVE_RES_INIT 1
-#define HAVE_SNPRINTF 1
-#define HAVE_STDINT_H 1
-#define HAVE_STDINT_H 1
-#define HAVE_STDLIB_H 1
-#define HAVE_STRINGS_H 1
-#define HAVE_STRING_H 1
-#define HAVE_SYS_STAT_H 1
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_UNISTD_H 1
-#define HAVE_VSNPRINTF 1
-#define KDELIBSUFF ""
-#define PACKAGE "mallory"
-#define PACKAGE_BUGREPORT ""
-#define PACKAGE_NAME ""
-#define PACKAGE_STRING ""
-#define PACKAGE_TARNAME ""
-#define PACKAGE_VERSION ""
-#define SIZEOF_CHAR_P 4
-#define SIZEOF_INT 4
-#define SIZEOF_LONG 4
-#define SIZEOF_SIZE_T 4
-#define SIZEOF_UNSIGNED_LONG 4
-#define STDC_HEADERS 1
-#define VERSION "1.0"
-#define ksize_t socklen_t
-#endif
-#ifdef __cplusplus
-extern "C" void std::exit (int) throw (); using std::exit;
-
-configure: exit 0
diff --git a/config.status b/config.status
deleted file mode 100755
index e764887..0000000
--- a/config.status
+++ /dev/null
@@ -1,1106 +0,0 @@
-#! /bin/sh
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=${CONFIG_SHELL-/bin/sh}
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-config_files=" Makefile colorscheme/Makefile malloryclient/Makefile malloryclient/config/Makefile"
-config_headers=" config.h"
-config_commands=" depfiles"
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-ac_cs_version="\
-config.status
-configured by ./configure, generated by GNU Autoconf 2.59,
-  with options \"'--prefix=/opt/kde3'\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=.
-INSTALL="/usr/bin/install -c -p"
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  -q | -quiet | --quiet | --tquie | --tqui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
-  echo "running /bin/sh ./configure " '--prefix=/opt/kde3' $ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec /bin/sh ./configure '--prefix=/opt/kde3' $ac_configure_extra_args --no-create --no-recursion
-fi
-
-#
-# INIT-COMMANDS section.
-#
-
-AMDEP_TRUE="" ac_aux_dir="admin"
-
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "colorscheme/Makefile" ) CONFIG_FILES="$CONFIG_FILES colorscheme/Makefile" ;;
-  "malloryclient/Makefile" ) CONFIG_FILES="$CONFIG_FILES malloryclient/Makefile" ;;
-  "malloryclient/config/Makefile" ) CONFIG_FILES="$CONFIG_FILES malloryclient/config/Makefile" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
-s,@SHELL@,/bin/sh,;t t
-s,@PATH_SEPARATOR@,:,;t t
-s,@PACKAGE_NAME@,,;t t
-s,@PACKAGE_TARNAME@,,;t t
-s,@PACKAGE_VERSION@,,;t t
-s,@PACKAGE_STRING@,,;t t
-s,@PACKAGE_BUGREPORT@,,;t t
-s,@exec_prefix@,${prefix},;t t
-s,@prefix@,/opt/kde3,;t t
-s,@program_transform_name@,s,x,x,,;t t
-s,@bindir@,${exec_prefix}/bin,;t t
-s,@sbindir@,${exec_prefix}/sbin,;t t
-s,@libexecdir@,${exec_prefix}/libexec,;t t
-s,@datadir@,${prefix}/share,;t t
-s,@sysconfdir@,${prefix}/etc,;t t
-s,@sharedstatedir@,${prefix}/com,;t t
-s,@localstatedir@,${prefix}/var,;t t
-s,@libdir@,${exec_prefix}/lib,;t t
-s,@includedir@,${prefix}/include,;t t
-s,@oldincludedir@,/usr/include,;t t
-s,@infodir@,${prefix}/info,;t t
-s,@mandir@,${prefix}/man,;t t
-s,@build_alias@,,;t t
-s,@host_alias@,,;t t
-s,@target_alias@,,;t t
-s,@DEFS@,-DHAVE_CONFIG_H,;t t
-s,@ECHO_C@,,;t t
-s,@ECHO_N@,-n,;t t
-s,@ECHO_T@,,;t t
-s,@LIBS@,,;t t
-s,@build@,i686-pc-linux-gnu,;t t
-s,@build_cpu@,i686,;t t
-s,@build_vendor@,pc,;t t
-s,@build_os@,linux-gnu,;t t
-s,@host@,i686-pc-linux-gnu,;t t
-s,@host_cpu@,i686,;t t
-s,@host_vendor@,pc,;t t
-s,@host_os@,linux-gnu,;t t
-s,@target@,i686-pc-linux-gnu,;t t
-s,@target_cpu@,i686,;t t
-s,@target_vendor@,pc,;t t
-s,@target_os@,linux-gnu,;t t
-s,@INSTALL_PROGRAM@,${INSTALL} $(INSTALL_STRIP_FLAG),;t t
-s,@INSTALL_SCRIPT@,${INSTALL},;t t
-s,@INSTALL_DATA@,${INSTALL} -m 644,;t t
-s,@PACKAGE@,mallory,;t t
-s,@VERSION@,1.0,;t t
-s,@ACLOCAL@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run aclocal-1.6,;t t
-s,@AUTOCONF@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoconf,;t t
-s,@AUTOMAKE@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run automake-1.6,;t t
-s,@AUTOHEADER@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoheader,;t t
-s,@MAKEINFO@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run makeinfo,;t t
-s,@AMTAR@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run tar,;t t
-s,@install_sh@,/stack/archives/kde-plus/window.decorations/mallory-1.0/admin/install-sh,;t t
-s,@STRIP@,strip,;t t
-s,@ac_ct_STRIP@,strip,;t t
-s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t
-s,@AWK@,gawk,;t t
-s,@SET_MAKE@,,;t t
-s,@CONF_FILES@, $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in,;t t
-s,@CC@,gcc,;t t
-s,@CFLAGS@,-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2   -Wformat-security -Wmissing-format-attribute,;t t
-s,@LDFLAGS@,,;t t
-s,@CPPFLAGS@, -DQT_THREAD_SUPPORT  -D_REENTRANT,;t t
-s,@ac_ct_CC@,gcc,;t t
-s,@EXEEXT@,,;t t
-s,@OBJEXT@,o,;t t
-s,@DEPDIR@,.deps,;t t
-s,@am__include@,include,;t t
-s,@am__quote@,,;t t
-s,@AMDEP_TRUE@,,;t t
-s,@AMDEP_FALSE@,#,;t t
-s,@AMDEPBACKSLASH@,\,;t t
-s,@CCDEPMODE@,depmode=gcc3,;t t
-s,@CPP@,gcc -E,;t t
-s,@CXX@,g++,;t t
-s,@CXXFLAGS@,-Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common,;t t
-s,@ac_ct_CXX@,g++,;t t
-s,@CXXDEPMODE@,depmode=gcc3,;t t
-s,@WOVERLOADED_VIRTUAL@,,;t t
-s,@USE_EXCEPTIONS@,-fexceptions,;t t
-s,@USE_RTTI@,,;t t
-s,@CXXCPP@,g++ -E,;t t
-s,@NOOPT_CXXFLAGS@,-O0,;t t
-s,@NOOPT_CFLAGS@,-O0,;t t
-s,@KDE_USE_FINAL_TRUE@,#,;t t
-s,@KDE_USE_FINAL_FALSE@,,;t t
-s,@KDE_USE_CLOSURE_TRUE@,,;t t
-s,@KDE_USE_CLOSURE_FALSE@,#,;t t
-s,@KDE_NO_UNDEFINED@,,;t t
-s,@KDE_USE_NMCHECK_TRUE@,#,;t t
-s,@KDE_USE_NMCHECK_FALSE@,,;t t
-s,@LN_S@,ln -s,;t t
-s,@ECHO@,echo,;t t
-s,@RANLIB@,ranlib,;t t
-s,@ac_ct_RANLIB@,ranlib,;t t
-s,@EGREP@,grep -E,;t t
-s,@LIBTOOL@,$(SHELL) $(top_builddir)/libtool --silent,;t t
-s,@KDE_PLUGIN@,-avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS),;t t
-s,@MSGFMT@,/usr/bin/msgfmt,;t t
-s,@GMSGFMT@,/usr/bin/msgfmt,;t t
-s,@XGETTEXT@,/usr/bin/xgettext,;t t
-s,@LIBUTIL@,-lutil,;t t
-s,@LIBCOMPAT@,,;t t
-s,@LIBCRYPT@,-lcrypt,;t t
-s,@LIBRESOLV@,-lresolv,;t t
-s,@LIB_POLL@,,;t t
-s,@FRAMEWORK_COREAUDIO@,,;t t
-s,@LIBSOCKET@,,;t t
-s,@X_EXTRA_LIBS@,,;t t
-s,@LIBUCB@,,;t t
-s,@LIBDL@,-ldl,;t t
-s,@X_INCLUDES@,-I/usr/X11R6/include,;t t
-s,@X_LDFLAGS@,-L/usr/X11R6/lib,;t t
-s,@x_libraries@,/usr/X11R6/lib,;t t
-s,@x_includes@,/usr/X11R6/include,;t t
-s,@LIBSM@,-lSM -lICE,;t t
-s,@X_PRE_LIBS@,,;t t
-s,@LIB_X11@,-lX11 $(LIBSOCKET),;t t
-s,@QTE_NORTTI@,,;t t
-s,@LIB_XEXT@,-lXext,;t t
-s,@LIBPTHREAD@,-lpthread,;t t
-s,@USE_THREADS@,,;t t
-s,@KDE_MT_LDFLAGS@,,;t t
-s,@KDE_MT_LIBS@,-lpthread,;t t
-s,@USER_INCLUDES@,,;t t
-s,@USER_LDFLAGS@,,;t t
-s,@LIBZ@,-lz,;t t
-s,@LIBPNG@,-lpng -lz -lm,;t t
-s,@LIBJPEG@,-ljpeg,;t t
-s,@qt_libraries@,/usr/lib/qt3/lib,;t t
-s,@qt_includes@,/usr/lib/qt3/include,;t t
-s,@QT_INCLUDES@,-I/usr/lib/qt3/include,;t t
-s,@QT_LDFLAGS@,-L/usr/lib/qt3/lib,;t t
-s,@MOC@,/usr/lib/qt3/bin/moc,;t t
-s,@UIC@,/usr/lib/qt3/bin/uic -L $(kde_widgetdir) -nounload,;t t
-s,@UIC_TR@,tr2i18n,;t t
-s,@LIB_QT@,-ltqt-mt  $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread,;t t
-s,@LIB_QPE@,,;t t
-s,@kde_qtver@,3,;t t
-s,@KDE_EXTRA_RPATH@,,;t t
-s,@KDE_RPATH@,-R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries),;t t
-s,@X_RPATH@,-R $(x_libraries),;t t
-s,@kde_libraries@,/opt/kde3/lib,;t t
-s,@kde_includes@,/opt/kde3/include,;t t
-s,@KDE_LDFLAGS@,-L/opt/kde3/lib,;t t
-s,@KDE_INCLUDES@,-I/opt/kde3/include,;t t
-s,@all_includes@,-I/opt/kde3/include -I/usr/lib/qt3/include -I/usr/X11R6/include ,;t t
-s,@all_libraries@,-L/usr/X11R6/lib -L/usr/lib/qt3/lib -L/opt/kde3/lib ,;t t
-s,@AUTODIRS@,,;t t
-s,@include_ARTS_TRUE@,,;t t
-s,@include_ARTS_FALSE@,#,;t t
-s,@DCOPIDL@,/opt/kde3/bin/dcopidl,;t t
-s,@DCOPIDL2CPP@,/opt/kde3/bin/dcopidl2cpp,;t t
-s,@DCOP_DEPENDENCIES@,$(DCOPIDL),;t t
-s,@MCOPIDL@,/opt/kde3/bin/mcopidl,;t t
-s,@ARTSCCONFIG@,/opt/kde3/bin/artsc-config,;t t
-s,@KDECONFIG@,/opt/kde3/bin/tde-config,;t t
-s,@BROCKENBORING@,,;t t
-s,@MEINPROC@,/opt/kde3/bin/meinproc,;t t
-s,@KDE_XSL_STYLESHEET@,/opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl,;t t
-s,@kde_libs_prefix@,/opt/kde3,;t t
-s,@kde_libs_htmldir@,/opt/kde3/share/doc/HTML,;t t
-s,@kde_htmldir@,${prefix}/share/doc/HTML,;t t
-s,@kde_appsdir@,${prefix}/share/applnk,;t t
-s,@kde_icondir@,${prefix}/share/icons,;t t
-s,@kde_sounddir@,${prefix}/share/sounds,;t t
-s,@kde_datadir@,${prefix}/share/apps,;t t
-s,@kde_locale@,${prefix}/share/locale,;t t
-s,@kde_confdir@,${prefix}/share/config,;t t
-s,@kde_mimedir@,${prefix}/share/mimelnk,;t t
-s,@kde_wallpaperdir@,${prefix}/share/wallpapers,;t t
-s,@kde_bindir@,${exec_prefix}/bin,;t t
-s,@xdg_appsdir@,${datadir}/applications,;t t
-s,@xdg_directorydir@,${datadir}/desktop-directories,;t t
-s,@kde_templatesdir@,${prefix}/share/templates,;t t
-s,@kde_servicesdir@,${prefix}/share/services,;t t
-s,@kde_servicetypesdir@,${prefix}/share/servicetypes,;t t
-s,@kde_moduledir@,${libdir}/kde3,;t t
-s,@tdeinitdir@,$(kde_moduledir),;t t
-s,@kde_styledir@,${libdir}/kde3/plugins/styles,;t t
-s,@kde_widgetdir@,/opt/kde3/lib/kde3/plugins/designer,;t t
-s,@LIB_TDECORE@,-ltdecore,;t t
-s,@LIB_TDEUI@,-ltdeui,;t t
-s,@LIB_TDEIO@,-ltdeio,;t t
-s,@LIB_SMB@,-lsmb,;t t
-s,@LIB_KAB@,-lkab,;t t
-s,@LIB_KABC@,-ltdeabc,;t t
-s,@LIB_TDEHTML@,-ltdehtml,;t t
-s,@LIB_TDESPELL@,-ltdespell,;t t
-s,@LIB_TDEPARTS@,-ltdeparts,;t t
-s,@LIB_TDEPRINT@,-ltdeprint,;t t
-s,@LIB_TDESYCOCA@,-ltdeio,;t t
-s,@LIB_KFILE@,-ltdeio,;t t
-s,@LIB_KFM@,,;t t
-s,@TOPSUBDIRS@, colorscheme malloryclient,;t t
-s,@LIBOBJS@,,;t t
-s,@LTLIBOBJS@,,;t t
-CEOF
-
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  #echo Doing the fast build of Makefiles -- autoconf 250
-        # VPATH subst was seen in original config.status main loop
-  echo '/^[ 	]*VPATH[ 	]*=[^:]*$/d' >>$tmp/subs.sed
-  rm -f $tmp/subs.files
-  for ac_file in .. $CONFIG_FILES ; do
-      if test "x$ac_file" != x..; then
-          echo $ac_file >> $tmp/subs.files
-      fi
-  done
-  if test -f $tmp/subs.files ; then
-      perl admin/config.pl "$tmp/subs.sed" "$tmp/subs.files" "$srcdir" "$INSTALL"
-  fi
-  rm -f $tmp/subs.files
-
-fi
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
-
-  # Handle all the #define templates only if necessary.
-  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then
-  # If there are no defines, we may have an empty if/fi
-  :
-  cat >$tmp/defines.sed <<CEOF
-/^[	 ]*#[	 ]*define/!b
-t clr
-: clr
-${ac_dA}PACKAGE_NAME${ac_dB}PACKAGE_NAME${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE_TARNAME${ac_dB}PACKAGE_TARNAME${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE_VERSION${ac_dB}PACKAGE_VERSION${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE_STRING${ac_dB}PACKAGE_STRING${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE_BUGREPORT${ac_dB}PACKAGE_BUGREPORT${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE${ac_dB}PACKAGE${ac_dC}"mallory"${ac_dD}
-${ac_dA}VERSION${ac_dB}VERSION${ac_dC}"1.0"${ac_dD}
-${ac_dA}KDELIBSUFF${ac_dB}KDELIBSUFF${ac_dC}""${ac_dD}
-${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_TYPES_H${ac_dB}HAVE_SYS_TYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_STAT_H${ac_dB}HAVE_SYS_STAT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRING_H${ac_dB}HAVE_STRING_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MEMORY_H${ac_dB}HAVE_MEMORY_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRINGS_H${ac_dB}HAVE_STRINGS_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_INTTYPES_H${ac_dB}HAVE_INTTYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDINT_H${ac_dB}HAVE_STDINT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_DLFCN_H${ac_dB}HAVE_DLFCN_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_CRYPT${ac_dB}HAVE_CRYPT${ac_dC}1${ac_dD}
-${ac_dA}ksize_t${ac_dB}ksize_t${ac_dC}socklen_t${ac_dD}
-${ac_dA}HAVE_SYS_TYPES_H${ac_dB}HAVE_SYS_TYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDINT_H${ac_dB}HAVE_STDINT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_RES_INIT${ac_dB}HAVE_RES_INIT${ac_dC}1${ac_dD}
-${ac_dA}SIZEOF_INT${ac_dB}SIZEOF_INT${ac_dC}4${ac_dD}
-${ac_dA}SIZEOF_LONG${ac_dB}SIZEOF_LONG${ac_dC}4${ac_dD}
-${ac_dA}SIZEOF_CHAR_P${ac_dB}SIZEOF_CHAR_P${ac_dC}4${ac_dD}
-${ac_dA}SIZEOF_SIZE_T${ac_dB}SIZEOF_SIZE_T${ac_dC}4${ac_dD}
-${ac_dA}SIZEOF_UNSIGNED_LONG${ac_dB}SIZEOF_UNSIGNED_LONG${ac_dC}4${ac_dD}
-${ac_dA}HAVE_VSNPRINTF${ac_dB}HAVE_VSNPRINTF${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SNPRINTF${ac_dB}HAVE_SNPRINTF${ac_dC}1${ac_dD}
-${ac_dA}HAVE_LIBZ${ac_dB}HAVE_LIBZ${ac_dC}1${ac_dD}
-${ac_dA}HAVE_LIBPNG${ac_dB}HAVE_LIBPNG${ac_dC}1${ac_dD}
-${ac_dA}HAVE_LIBJPEG${ac_dB}HAVE_LIBJPEG${ac_dC}1${ac_dD}
-${ac_dA}HAVE_LIBPTHREAD${ac_dB}HAVE_LIBPTHREAD${ac_dC}1${ac_dD}
-CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  fi # grep
-
-  # Handle all the #undef templates
-  cat >$tmp/undefs.sed <<CEOF
-/^[	 ]*#[	 ]*undef/!b
-t clr
-: clr
-${ac_uA}PACKAGE_NAME${ac_uB}PACKAGE_NAME${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE_TARNAME${ac_uB}PACKAGE_TARNAME${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE_VERSION${ac_uB}PACKAGE_VERSION${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE_STRING${ac_uB}PACKAGE_STRING${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE_BUGREPORT${ac_uB}PACKAGE_BUGREPORT${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE${ac_uB}PACKAGE${ac_uC}"mallory"${ac_uD}
-${ac_uA}VERSION${ac_uB}VERSION${ac_uC}"1.0"${ac_uD}
-${ac_uA}KDELIBSUFF${ac_uB}KDELIBSUFF${ac_uC}""${ac_uD}
-${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_TYPES_H${ac_uB}HAVE_SYS_TYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_STAT_H${ac_uB}HAVE_SYS_STAT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDLIB_H${ac_uB}HAVE_STDLIB_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRING_H${ac_uB}HAVE_STRING_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_MEMORY_H${ac_uB}HAVE_MEMORY_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRINGS_H${ac_uB}HAVE_STRINGS_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_INTTYPES_H${ac_uB}HAVE_INTTYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDINT_H${ac_uB}HAVE_STDINT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_UNISTD_H${ac_uB}HAVE_UNISTD_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_DLFCN_H${ac_uB}HAVE_DLFCN_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_CRYPT${ac_uB}HAVE_CRYPT${ac_uC}1${ac_uD}
-${ac_uA}ksize_t${ac_uB}ksize_t${ac_uC}socklen_t${ac_uD}
-${ac_uA}HAVE_SYS_TYPES_H${ac_uB}HAVE_SYS_TYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDINT_H${ac_uB}HAVE_STDINT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_RES_INIT${ac_uB}HAVE_RES_INIT${ac_uC}1${ac_uD}
-${ac_uA}SIZEOF_INT${ac_uB}SIZEOF_INT${ac_uC}4${ac_uD}
-${ac_uA}SIZEOF_LONG${ac_uB}SIZEOF_LONG${ac_uC}4${ac_uD}
-${ac_uA}SIZEOF_CHAR_P${ac_uB}SIZEOF_CHAR_P${ac_uC}4${ac_uD}
-${ac_uA}SIZEOF_SIZE_T${ac_uB}SIZEOF_SIZE_T${ac_uC}4${ac_uD}
-${ac_uA}SIZEOF_UNSIGNED_LONG${ac_uB}SIZEOF_UNSIGNED_LONG${ac_uC}4${ac_uD}
-${ac_uA}HAVE_VSNPRINTF${ac_uB}HAVE_VSNPRINTF${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SNPRINTF${ac_uB}HAVE_SNPRINTF${ac_uC}1${ac_uD}
-${ac_uA}HAVE_LIBZ${ac_uB}HAVE_LIBZ${ac_uC}1${ac_uD}
-${ac_uA}HAVE_LIBPNG${ac_uB}HAVE_LIBPNG${ac_uC}1${ac_uD}
-${ac_uA}HAVE_LIBJPEG${ac_uB}HAVE_LIBJPEG${ac_uC}1${ac_uD}
-${ac_uA}HAVE_LIBPTHREAD${ac_uB}HAVE_LIBPTHREAD${ac_uC}1${ac_uD}
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-  # Run the commands associated with the file.
-  case $ac_file in
-    config.h ) # update the timestamp
-echo 'timestamp for config.h' >"./stamp-h1"
- ;;
-  esac
-done
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_dest" : 'X\(//\)[^/]' \| \
-	 X"$ac_dest" : 'X\(//\)$' \| \
-	 X"$ac_dest" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`(dirname "$mf") 2>/dev/null ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$mf" : 'X\(//\)[^/]' \| \
-	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  else
-    continue
-  fi
-  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
-  # Extract the definition of DEP_FILES from the Makefile without
-  # running `make'.
-  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n -e '/^U = / s///p' < "$mf"`
-  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-  # We invoke sed twice because it is the simplest approach to
-  # changing $(DEPDIR) to its actual value in the expansion.
-  for file in `sed -n -e '
-    /^DEP_FILES = .*\\\\$/ {
-      s/^DEP_FILES = //
-      :loop
-	s/\\\\$//
-	p
-	n
-	/\\\\$/ b loop
-      p
-    }
-    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`(dirname "$file") 2>/dev/null ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$file" : 'X\(//\)[^/]' \| \
-	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    { if $as_mkdir_p; then
-    mkdir -p $dirpart/$fdir
-  else
-    as_dir=$dirpart/$fdir
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
- ;;
-  esac
-done
-
-{ (exit 0); exit 0; }
diff --git a/configure b/configure
deleted file mode 100755
index 80b760f..0000000
--- a/configure
+++ /dev/null
@@ -1,28353 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
-#
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="acinclude.m4"
-ac_default_prefix=${TDEDIR:-/usr/local/kde}
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE CONF_FILES CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE WOVERLOADED_VIRTUAL USE_EXCEPTIONS USE_RTTI CXXCPP NOOPT_CXXFLAGS NOOPT_CFLAGS KDE_USE_FINAL_TRUE KDE_USE_FINAL_FALSE KDE_USE_CLOSURE_TRUE KDE_USE_CLOSURE_FALSE KDE_NO_UNDEFINED KDE_USE_NMCHECK_TRUE KDE_USE_NMCHECK_FALSE LN_S ECHO RANLIB ac_ct_RANLIB EGREP LIBTOOL KDE_PLUGIN MSGFMT GMSGFMT XGETTEXT LIBUTIL LIBCOMPAT LIBCRYPT LIBRESOLV LIB_POLL FRAMEWORK_COREAUDIO LIBSOCKET X_EXTRA_LIBS LIBUCB LIBDL X_INCLUDES X_LDFLAGS x_libraries x_includes LIBSM X_PRE_LIBS LIB_X11 QTE_NORTTI LIB_XEXT LIBPTHREAD USE_THREADS KDE_MT_LDFLAGS KDE_MT_LIBS USER_INCLUDES USER_LDFLAGS LIBZ LIBPNG LIBJPEG qt_libraries qt_includes QT_INCLUDES QT_LDFLAGS MOC UIC UIC_TR LIB_QT LIB_QPE kde_qtver KDE_EXTRA_RPATH KDE_RPATH X_RPATH kde_libraries kde_includes KDE_LDFLAGS KDE_INCLUDES all_includes all_libraries AUTODIRS include_ARTS_TRUE include_ARTS_FALSE DCOPIDL DCOPIDL2CPP DCOP_DEPENDENCIES MCOPIDL ARTSCCONFIG KDECONFIG BROCKENBORING MEINPROC KDE_XSL_STYLESHEET kde_libs_prefix kde_libs_htmldir kde_htmldir kde_appsdir kde_icondir kde_sounddir kde_datadir kde_locale kde_confdir kde_mimedir kde_wallpaperdir kde_bindir xdg_appsdir xdg_directorydir kde_templatesdir kde_servicesdir kde_servicetypesdir kde_moduledir tdeinitdir kde_styledir kde_widgetdir LIB_TDECORE LIB_TDEUI LIB_TDEIO LIB_SMB LIB_KAB LIB_KABC LIB_TDEHTML LIB_TDESPELL LIB_TDEPARTS LIB_TDEPRINT LIB_TDESYCOCA LIB_KFILE LIB_KFM TOPSUBDIRS LIBOBJS LTLIBOBJS'
-ac_subst_files=''
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_option in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --tquie | --tqui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-ac_env_CXX_set=${CXX+set}
-ac_env_CXX_value=$CXX
-ac_cv_env_CXX_set=${CXX+set}
-ac_cv_env_CXX_value=$CXX
-ac_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_env_CXXFLAGS_value=$CXXFLAGS
-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_cv_env_CXXFLAGS_value=$CXXFLAGS
-ac_env_CXXCPP_set=${CXXCPP+set}
-ac_env_CXXCPP_value=$CXXCPP
-ac_cv_env_CXXCPP_set=${CXXCPP+set}
-ac_cv_env_CXXCPP_value=$CXXCPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
-  cat <<_ACEOF
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
-_ACEOF
-
-  cat <<\_ACEOF
-
-Program names:
-  --program-prefix=PREFIX            prepend PREFIX to installed program names
-  --program-suffix=SUFFIX            append SUFFIX to installed program names
-  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-  --target=TARGET   configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --disable-fast-perl     disable fast Makefile generation (needs perl)
-  --enable-debug=ARG    enables debug symbols (yes|no|full) default=no
-  --disable-debug         disables debug output and debug symbols default=no
-  --enable-strict         compiles with strict compiler options (may not work!)
-  --disable-warnings      disables compilation with -Wall and similiar
-  --enable-profile        creates profiling infos default=no
-  --disable-dependency-tracking Speeds up one-time builds
-  --enable-dependency-tracking  Do not reject slow dependency extractors
-  --enable-pch            enables precompiled header support (currently only KCC) default=no
-  --enable-final          build size optimized apps (experimental - needs lots of memory)
-  --disable-closure       don't delay template instantiation
-  --enable-nmcheck        enable automatic namespace cleanness check
-  --enable-shared[=PKGS]
-                          build shared libraries [default=yes]
-  --enable-static[=PKGS]
-                          build static libraries [default=no]
-  --enable-libsuffix      /lib directory suffix (64,32,none=default)
-  --enable-fast-install[=PKGS]
-                          optimize for fast installation [default=yes]
-  --disable-libtool-lock  avoid locking (might break parallel builds)
-  --enable-objprelink     prelink apps using objprelink (obsolete)
-  --enable-embedded       link to Qt-embedded, don't use X
-  --enable-qtopia         link to Qt-embedded, link to the Qtopia Environment
-  --disable-mt            link to non-threaded Qt (deprecated)
-  --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.
-  --disable-threading     disables threading even if libpthread found
-  --disable-rpath         do not use the rpath feature of ld
-  --disable-path-check    don't try to find out, where to install
-
-Optional Packages:
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-pic              try to use only PIC/non-PIC objects [default=use
-                          both]
-  --with-tags=TAGS        include additional configurations [CXX,GCJ]
-  --with-extra-includes=DIR
-                          adds non standard include paths
-  --with-extra-libs=DIR   adds non standard library paths
-  --with-qt-dir=DIR       where the root of Qt is installed
-  --with-qt-includes=DIR  where the Qt includes are.
-  --with-qt-libraries=DIR where the Qt library is installed.
-  --without-arts        build without aRts default=detect
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-  CXX         C++ compiler command
-  CXXFLAGS    C++ compiler flags
-  CXXCPP      C++ preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
-    ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
-    else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
-  done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
-  cat <<\_ACEOF
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --tquie | --tqui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
-      ;;
-    esac
-  done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-{
-  (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
-    *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-}
-    echo
-
-    cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
-      echo
-      sed "/^$/d" confdefs.h | sort
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-     ' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_aux_dir=
-for ac_dir in admin $srcdir/admin; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f $ac_dir/shtool; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in admin $srcdir/admin" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in admin $srcdir/admin" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-unset CDPATH
-
-# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
-build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
-host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6
-if test "${ac_cv_target+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_target_alias=$target_alias
-test "x$ac_cv_target_alias" = "x" &&
-  ac_cv_target_alias=$ac_cv_host_alias
-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6
-target=$ac_cv_target
-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
-
-
-am__api_version="1.6"
-
-
-          test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
-  test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
-  test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
-  # Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-done
-
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL=$ac_install_sh
-  fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-  if test -z "$kde_save_INSTALL_given" ; then
-    # OK, user hasn't given any INSTALL, autoconf found one for us
-    # now we test, if it supports the -p flag
-    echo "$as_me:$LINENO: checking for -p flag to install" >&5
-echo $ECHO_N "checking for -p flag to install... $ECHO_C" >&6
-    rm -f confinst.$$.* > /dev/null 2>&1
-    echo "Testtest" > confinst.$$.orig
-    ac_res=no
-    if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
-      if test -f confinst.$$.new ; then
-        # OK, -p seems to do no harm to install
-	INSTALL="${INSTALL} -p"
-	ac_res=yes
-      fi
-    fi
-    rm -f confinst.$$.*
-    echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6
-  fi
-
-  if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
-    INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
-  fi
-  if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
-    INSTALL_SCRIPT='${INSTALL}'
-  fi
-
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&2;}
-   { (exit 1); exit 1; }; }
-   fi
-
-   test "$2" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-for ac_prog in gawk mawk nawk awk
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$AWK"; then
-  ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
-  echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$AWK" && break
-done
-
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.make <<\_ACEOF
-all:
-	@echo 'ac_maketemp="$(MAKE)"'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftest.make
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-  SET_MAKE=
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
- # test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-# Define the identity of the package.
- PACKAGE=mallory
- VERSION=1.0
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  STRIP=$ac_ct_STRIP
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-
-
-
-
-  unset CDPATH
-
-
-  if test "x$prefix" = "xNONE"; then
-    prefix=$ac_default_prefix
-    ac_configure_args="$ac_configure_args --prefix=$prefix"
-  fi
-  # And delete superflous '/' to make compares easier
-  prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
-  exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
-
-    # Check whether --enable-fast-perl or --disable-fast-perl was given.
-if test "${enable_fast_perl+set}" = set; then
-  enableval="$enable_fast_perl"
-  with_fast_perl=$enableval
-else
-  with_fast_perl=yes
-fi;
-
-
-  val=
-  if test -f $srcdir/configure.files ; then
-    val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
-  fi
-  CONF_FILES=
-  if test -n "$val" ; then
-    for i in $val ; do
-      CONF_FILES="$CONF_FILES $i"
-    done
-  fi
-
-
-
-
-# Add the stamp file to the list of files AC keeps track of,
-# along with our hook.
-          ac_config_headers="$ac_config_headers config.h"
-
-
-
-rm -f .deps 2>/dev/null
-mkdir .deps 2>/dev/null
-if test -d .deps; then
-  DEPDIR=.deps
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  DEPDIR=_deps
-fi
-rmdir .deps 2>/dev/null
-
-
-          ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-doit:
-	@echo done
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-
-
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
-  enableval="$enable_dependency_tracking"
-
-fi;
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
-else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
-fi
-
-
-
-
-
-  # Check whether --enable-debug or --disable-debug was given.
-if test "${enable_debug+set}" = set; then
-  enableval="$enable_debug"
-
-    case $enableval in
-      yes)
-        kde_use_debug_code="yes"
-        kde_use_debug_define=no
-        ;;
-      full)
-        kde_use_debug_code="full"
-        kde_use_debug_define=no
-        ;;
-      *)
-        kde_use_debug_code="no"
-        kde_use_debug_define=yes
-        ;;
-    esac
-
-else
-  kde_use_debug_code="no"
-      kde_use_debug_define=no
-
-fi;
-
-    # Check whether --enable-dummyoption or --disable-dummyoption was given.
-if test "${enable_dummyoption+set}" = set; then
-  enableval="$enable_dummyoption"
-
-fi;
-
-  # Check whether --enable-strict or --disable-strict was given.
-if test "${enable_strict+set}" = set; then
-  enableval="$enable_strict"
-
-    if test $enableval = "no"; then
-         kde_use_strict_options="no"
-       else
-         kde_use_strict_options="yes"
-    fi
-
-else
-  kde_use_strict_options="no"
-fi;
-
-  # Check whether --enable-warnings or --disable-warnings was given.
-if test "${enable_warnings+set}" = set; then
-  enableval="$enable_warnings"
-
-    if test $enableval = "no"; then
-         kde_use_warnings="no"
-       else
-         kde_use_warnings="yes"
-    fi
-
-else
-  kde_use_warnings="yes"
-fi;
-
-    if test "$kde_use_debug_code" != "no"; then
-    kde_use_warnings=yes
-  fi
-
-  # Check whether --enable-profile or --disable-profile was given.
-if test "${enable_profile+set}" = set; then
-  enableval="$enable_profile"
-  kde_use_profiling=$enableval
-else
-  kde_use_profiling="no"
-
-fi;
-
-    CFLAGS=" $CFLAGS"
-
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$ac_ct_CC" && break
-done
-
-  CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
-    conftest.$ac_ext )
-	# This is the source file.
-	;;
-    [ab].out )
-	# We found the default executable, but exeext='' is most
-	# certainly right.
-	break;;
-    *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
-	break;;
-    * )
-	break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
-  if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-	cross_compiling=yes
-    else
-	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-  fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
-	  break;;
-    * ) break;;
-  esac
-done
-else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
-  *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC"   am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    echo '#include "conftest.h"' > conftest.c
-    echo 'int i;' > conftest.h
-    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=conftest.c object=conftest.o \
-       depfile=conftest.Po tmpdepfile=conftest.TPo \
-       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      am_cv_CC_dependencies_compiler_type=$depmode
-      break
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-  if test "$GCC" = "yes"; then
-    if test "$kde_use_debug_code" != "no"; then
-      if test $kde_use_debug_code = "full"; then
-        CFLAGS="-g3 $CFLAGS"
-      else
-        CFLAGS="-g -O2 $CFLAGS"
-      fi
-    else
-      CFLAGS="-O2 $CFLAGS"
-    fi
-  fi
-
-  if test "$kde_use_debug_define" = "yes"; then
-    CFLAGS="-DNDEBUG $CFLAGS"
-  fi
-
-
-  case "$host" in
-  *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";;
-  *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";;
-  esac
-
-  if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
-     LDFLAGS=""
-  fi
-
-  CXXFLAGS=" $CXXFLAGS"
-
-  ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
-  echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-    test -n "$CXX" && break
-  done
-fi
-if test -z "$CXX"; then
-  ac_ct_CXX=$CXX
-  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CXX"; then
-  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CXX="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$ac_ct_CXX" && break
-done
-test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
-
-  CXX=$ac_ct_CXX
-fi
-
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C++ compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-
-echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
-GXX=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-CXXFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cxx_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cxx_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cxx_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CXX"  am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-
-  am_cv_CXX_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    echo '#include "conftest.h"' > conftest.c
-    echo 'int i;' > conftest.h
-    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=conftest.c object=conftest.o \
-       depfile=conftest.Po tmpdepfile=conftest.TPo \
-       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      am_cv_CXX_dependencies_compiler_type=$depmode
-      break
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CXX_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
-
-
-  if test "$GXX" = "yes" || test "$CXX" = "KCC"; then
-    if test "$kde_use_debug_code" != "no"; then
-      if test "$CXX" = "KCC"; then
-        CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
-      else
-        if test "$kde_use_debug_code" = "full"; then
-          CXXFLAGS="-g3 $CXXFLAGS"
-        else
-          CXXFLAGS="-g -O2 $CXXFLAGS"
-        fi
-      fi
-
-echo "$as_me:$LINENO: checking whether $CXX supports -fno-builtin" >&5
-echo $ECHO_N "checking whether $CXX supports -fno-builtin... $ECHO_C" >&6
-kde_cache=`echo fno-builtin | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-
-ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -fno-builtin"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="-fno-builtin $CXXFLAGS"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports -Woverloaded-virtual" >&5
-echo $ECHO_N "checking whether $CXX supports -Woverloaded-virtual... $ECHO_C" >&6
-kde_cache=`echo Woverloaded-virtual | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -Woverloaded-virtual"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- WOVERLOADED_VIRTUAL="-Woverloaded-virtual"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
- WOVERLOADED_VRITUAL=""
-fi
-
-
-    else
-      if test "$CXX" = "KCC"; then
-        CXXFLAGS="+K3 $CXXFLAGS"
-      else
-        CXXFLAGS="-O2 $CXXFLAGS"
-      fi
-    fi
-  fi
-
-  if test "$kde_use_debug_define" = "yes"; then
-    CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS"
-  fi
-
-  if test "$kde_use_profiling" = "yes"; then
-
-echo "$as_me:$LINENO: checking whether $CXX supports -pg" >&5
-echo $ECHO_N "checking whether $CXX supports -pg... $ECHO_C" >&6
-kde_cache=`echo pg | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -pg"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
-
-      CFLAGS="-pg $CFLAGS"
-      CXXFLAGS="-pg $CXXFLAGS"
-
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-  fi
-
-  if test "$kde_use_warnings" = "yes"; then
-      if test "$GCC" = "yes"; then
-        case $host in
-          *-*-linux-gnu)
-            CFLAGS="-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS"
-            CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS"
-
-echo "$as_me:$LINENO: checking whether $CXX supports -Wmissing-format-attribute" >&5
-echo $ECHO_N "checking whether $CXX supports -Wmissing-format-attribute... $ECHO_C" >&6
-kde_cache=`echo Wmissing-format-attribute | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -Wmissing-format-attribute"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"; CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-          ;;
-        esac
-        CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
-
-echo "$as_me:$LINENO: checking whether $CXX supports -Wundef" >&5
-echo $ECHO_N "checking whether $CXX supports -Wundef... $ECHO_C" >&6
-kde_cache=`echo Wundef | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -Wundef"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="-Wundef $CXXFLAGS"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports -Wno-long-long" >&5
-echo $ECHO_N "checking whether $CXX supports -Wno-long-long... $ECHO_C" >&6
-kde_cache=`echo Wno-long-long | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -Wno-long-long"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="-Wno-long-long $CXXFLAGS"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports -Wnon-virtual-dtor" >&5
-echo $ECHO_N "checking whether $CXX supports -Wnon-virtual-dtor... $ECHO_C" >&6
-kde_cache=`echo Wnon-virtual-dtor | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -Wnon-virtual-dtor"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-     fi
-  fi
-
-  if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then
-    CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS"
-  fi
-
-  if test "$GXX" = "yes"; then
-
-echo "$as_me:$LINENO: checking whether $CXX supports -fno-exceptions" >&5
-echo $ECHO_N "checking whether $CXX supports -fno-exceptions... $ECHO_C" >&6
-kde_cache=`echo fno-exceptions | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -fno-exceptions"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS -fno-exceptions"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports -fno-check-new" >&5
-echo $ECHO_N "checking whether $CXX supports -fno-check-new... $ECHO_C" >&6
-kde_cache=`echo fno-check-new | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -fno-check-new"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS -fno-check-new"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports -fno-common" >&5
-echo $ECHO_N "checking whether $CXX supports -fno-common... $ECHO_C" >&6
-kde_cache=`echo fno-common | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -fno-common"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS -fno-common"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports -fexceptions" >&5
-echo $ECHO_N "checking whether $CXX supports -fexceptions... $ECHO_C" >&6
-kde_cache=`echo fexceptions | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -fexceptions"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- USE_EXCEPTIONS="-fexceptions"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
- USE_EXCEPTIONS=
-fi
-
-  fi
-  if test "$CXX" = "KCC"; then
-
-    # Check whether --enable-pch or --disable-pch was given.
-if test "${enable_pch+set}" = set; then
-  enableval="$enable_pch"
-
-      kde_use_pch=$enableval
-
-else
-  kde_use_pch=no
-fi;
-
-    if test "$kde_use_pch" = "yes"; then
-
-echo "$as_me:$LINENO: checking whether $CXX supports --pch" >&5
-echo $ECHO_N "checking whether $CXX supports --pch... $ECHO_C" >&6
-kde_cache=`echo -pch | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS --pch"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS --pch"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-                                              fi
-
-echo "$as_me:$LINENO: checking whether $CXX supports --inline_keyword_space_time=6" >&5
-echo $ECHO_N "checking whether $CXX supports --inline_keyword_space_time=6... $ECHO_C" >&6
-kde_cache=`echo -inline_keyword_space_time=6 | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports --inline_auto_space_time=2" >&5
-echo $ECHO_N "checking whether $CXX supports --inline_auto_space_time=2... $ECHO_C" >&6
-kde_cache=`echo -inline_auto_space_time=2 | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports --inline_implicit_space_time=2.0" >&5
-echo $ECHO_N "checking whether $CXX supports --inline_implicit_space_time=2.0... $ECHO_C" >&6
-kde_cache=`echo -inline_implicit_space_time=2.0 | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports --inline_generated_space_time=2.0" >&5
-echo $ECHO_N "checking whether $CXX supports --inline_generated_space_time=2.0... $ECHO_C" >&6
-kde_cache=`echo -inline_generated_space_time=2.0 | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether $CXX supports --one_per" >&5
-echo $ECHO_N "checking whether $CXX supports --one_per... $ECHO_C" >&6
-kde_cache=`echo -one_per | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS --one_per"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- CXXFLAGS="$CXXFLAGS --one_per"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-  fi
-
-    USE_RTTI=
-
-
-  case "$host" in
-      *-*-irix*)  test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;;
-      *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";;
-      *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";;
-      *-*-solaris*)
-        if test "$GXX" = yes; then
-          libstdcpp=`$CXX -print-file-name=libstdc++.so`
-          if test ! -f $libstdcpp; then
-             { { echo "$as_me:$LINENO: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" >&5
-echo "$as_me: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" >&2;}
-   { (exit 1); exit 1; }; }
-          fi
-        fi
-        ;;
-  esac
-
-  if test "x$kde_use_qt_emb" != "xyes"; then
-  __val=$CXX
-  __forbid=" -fno-rtti -rpath "
-  if test -n "$__val"; then
-    __new=""
-    ac_save_IFS=$IFS
-    IFS=" 	"
-    for i in $__val; do
-      case "$__forbid" in
-        *" $i "*) { echo "$as_me:$LINENO: WARNING: found forbidden $i in CXX, removing it" >&5
-echo "$as_me: WARNING: found forbidden $i in CXX, removing it" >&2;} ;;
-	*) # Careful to not add spaces, where there were none, because otherwise
-	   # libtool gets confused, if we change e.g. CXX
-	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
-      esac
-    done
-    IFS=$ac_save_IFS
-    CXX=$__new
-  fi
-
-  __val=$CXXFLAGS
-  __forbid=" -fno-rtti -rpath "
-  if test -n "$__val"; then
-    __new=""
-    ac_save_IFS=$IFS
-    IFS=" 	"
-    for i in $__val; do
-      case "$__forbid" in
-        *" $i "*) { echo "$as_me:$LINENO: WARNING: found forbidden $i in CXXFLAGS, removing it" >&5
-echo "$as_me: WARNING: found forbidden $i in CXXFLAGS, removing it" >&2;} ;;
-	*) # Careful to not add spaces, where there were none, because otherwise
-	   # libtool gets confused, if we change e.g. CXX
-	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
-      esac
-    done
-    IFS=$ac_save_IFS
-    CXXFLAGS=$__new
-  fi
-
-else
-  __val=$CXX
-  __forbid=" -rpath "
-  if test -n "$__val"; then
-    __new=""
-    ac_save_IFS=$IFS
-    IFS=" 	"
-    for i in $__val; do
-      case "$__forbid" in
-        *" $i "*) { echo "$as_me:$LINENO: WARNING: found forbidden $i in CXX, removing it" >&5
-echo "$as_me: WARNING: found forbidden $i in CXX, removing it" >&2;} ;;
-	*) # Careful to not add spaces, where there were none, because otherwise
-	   # libtool gets confused, if we change e.g. CXX
-	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
-      esac
-    done
-    IFS=$ac_save_IFS
-    CXX=$__new
-  fi
-
-  __val=$CXXFLAGS
-  __forbid=" -rpath "
-  if test -n "$__val"; then
-    __new=""
-    ac_save_IFS=$IFS
-    IFS=" 	"
-    for i in $__val; do
-      case "$__forbid" in
-        *" $i "*) { echo "$as_me:$LINENO: WARNING: found forbidden $i in CXXFLAGS, removing it" >&5
-echo "$as_me: WARNING: found forbidden $i in CXXFLAGS, removing it" >&2;} ;;
-	*) # Careful to not add spaces, where there were none, because otherwise
-	   # libtool gets confused, if we change e.g. CXX
-	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
-      esac
-    done
-    IFS=$ac_save_IFS
-    CXXFLAGS=$__new
-  fi
-
-fi
-
-
-  ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
-if test -z "$CXXCPP"; then
-  if test "${ac_cv_prog_CXXCPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CXXCPP needs to be expanded
-    for CXXCPP in "$CXX -E" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_cxx_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_cxx_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CXXCPP=$CXXCPP
-
-fi
-  CXXCPP=$ac_cv_prog_CXXCPP
-else
-  ac_cv_prog_CXXCPP=$CXXCPP
-fi
-echo "$as_me:$LINENO: result: $CXXCPP" >&5
-echo "${ECHO_T}$CXXCPP" >&6
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_cxx_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_cxx_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-  if test "$GCC" = yes; then
-     NOOPT_CFLAGS=-O0
-  fi
-
-echo "$as_me:$LINENO: checking whether $CXX supports -O0" >&5
-echo $ECHO_N "checking whether $CXX supports -O0... $ECHO_C" >&6
-kde_cache=`echo O0 | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -O0"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- NOOPT_CXXFLAGS=-O0
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-
-
-
-
-
-  # Check whether --enable-final or --disable-final was given.
-if test "${enable_final+set}" = set; then
-  enableval="$enable_final"
-  kde_use_final=$enableval
-else
-  kde_use_final=no
-fi;
-
-  if test "x$kde_use_final" = "xyes"; then
-      KDE_USE_FINAL_TRUE=""
-      KDE_USE_FINAL_FALSE="#"
-   else
-      KDE_USE_FINAL_TRUE="#"
-      KDE_USE_FINAL_FALSE=""
-  fi
-
-
-
-
-  # Check whether --enable-closure or --disable-closure was given.
-if test "${enable_closure+set}" = set; then
-  enableval="$enable_closure"
-  kde_use_closure=$enableval
-else
-  kde_use_closure=yes
-fi;
-
-  KDE_NO_UNDEFINED=""
-  if test "x$kde_use_closure" = "xyes"; then
-       KDE_USE_CLOSURE_TRUE=""
-       KDE_USE_CLOSURE_FALSE="#"
-#       CXXFLAGS="$CXXFLAGS $REPO"
-  else
-       KDE_USE_CLOSURE_TRUE="#"
-       KDE_USE_CLOSURE_FALSE=""
-
-echo "$as_me:$LINENO: checking whether $CXX supports -Wl,--no-undefined" >&5
-echo $ECHO_N "checking whether $CXX supports -Wl,--no-undefined... $ECHO_C" >&6
-kde_cache=`echo Wl,--no-undefined | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -Wl,--no-undefined"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
-
-echo "$as_me:$LINENO: checking whether $CXX supports -Wl,--allow-shlib-undefined" >&5
-echo $ECHO_N "checking whether $CXX supports -Wl,--allow-shlib-undefined... $ECHO_C" >&6
-kde_cache=`echo Wl,--allow-shlib-undefined | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -Wl,--allow-shlib-undefined"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
- KDE_NO_UNDEFINED=""
-fi
-
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
- KDE_NO_UNDEFINED=""
-fi
-
-  fi
-
-
-
-
-
-  # Check whether --enable-nmcheck or --disable-nmcheck was given.
-if test "${enable_nmcheck+set}" = set; then
-  enableval="$enable_nmcheck"
-  kde_use_nmcheck=$enableval
-else
-  kde_use_nmcheck=no
-fi;
-
-  if test "$kde_use_nmcheck" = "yes"; then
-      KDE_USE_NMCHECK_TRUE=""
-      KDE_USE_NMCHECK_FALSE="#"
-   else
-      KDE_USE_NMCHECK_TRUE="#"
-      KDE_USE_NMCHECK_FALSE=""
-  fi
-
-
-
-
-
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_shared=yes
-fi;
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_static=no
-fi;
-
-
-
-
-    tdelibsuff=none
-    # Check whether --enable-libsuffix or --disable-libsuffix was given.
-if test "${enable_libsuffix+set}" = set; then
-  enableval="$enable_libsuffix"
-  tdelibsuff=$enableval
-fi;
-    # TODO: add an auto case that compiles a little C app to check
-    # where the glibc is
-    if test "$tdelibsuff" = "none"; then
-       tdelibsuff=
-    fi
-    if test -z "$tdelibsuff"; then
-        echo "$as_me:$LINENO: result: not using lib directory suffix" >&5
-echo "${ECHO_T}not using lib directory suffix" >&6
-
-cat >>confdefs.h <<\_ACEOF
-#define KDELIBSUFF ""
-_ACEOF
-
-    else
-        if test "$libdir" = '${exec_prefix}/lib'; then
-            libdir="$libdir${tdelibsuff}"
-            libdir="$libdir"
-          fi
-
-cat >>confdefs.h <<_ACEOF
-#define KDELIBSUFF "\"${tdelibsuff}\""
-_ACEOF
-
-        echo "$as_me:$LINENO: result: using lib directory suffix $tdelibsuff" >&5
-echo "${ECHO_T}using lib directory suffix $tdelibsuff" >&6
-    fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_fast_install=yes
-fi;
-
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi;
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo "$as_me:$LINENO: checking for ld used by GCC" >&5
-echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
-else
-  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
-if test "${lt_cv_ld_reload_flag+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-
-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
-if test "${lt_cv_path_NM+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ("$tmp_nm" -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ("$tmp_nm" -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6
-NM="$lt_cv_path_NM"
-
-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
-if test "${lt_cv_path_SED+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-
-  # Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
-  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=$TMPDIR/sed$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-   { (exit 1); exit 1; }
-}
-  _max=0
-  _count=0
-  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
-  # along with /bin/sed that truncates output.
-  for _sed in $_sed_list /usr/xpg4/bin/sed; do
-    test ! -f ${_sed} && break
-    cat /dev/null > "$tmp/sed.in"
-    _count=0
-    echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in"
-    # Check for GNU sed and select it if it is found.
-    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
-      lt_cv_path_SED=${_sed}
-      break;
-    fi
-    while true; do
-      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
-      mv "$tmp/sed.tmp" "$tmp/sed.in"
-      cp "$tmp/sed.in" "$tmp/sed.nl"
-      echo >>"$tmp/sed.nl"
-      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
-      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
-      # 10000 chars as input seems more than enough
-      test $_count -gt 10 && break
-      _count=`expr $_count + 1`
-      if test $_count -gt $_max; then
-        _max=$_count
-        lt_cv_path_SED=$_sed
-      fi
-    done
-  done
-  rm -rf "$tmp"
-
-fi
-
-echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6
-
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
-fi
-
-echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5
-echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
-if test "${lt_cv_deplibs_check_method+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* | pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[012])
-    lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  if test "$host_cpu" = ia64; then
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-  else
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  fi
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-  irix5* | nonstopux*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh* | x86_64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  # the debian people say, arm and glibc 2.3.1 works for them with pass_all
-  arm* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-nto-qnx)
-  lt_cv_deplibs_check_method=unknown
-  ;;
-
-openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
-  else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  esac
-  ;;
-
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-
-fi;
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 6706 "configure"' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-linux*)
-  # Test if the compiler is 64bit
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *"ELF 32"*)
-      LINUX_64_MODE="32"
-      ;;
-    *"ELF 64"*)
-      LINUX_64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
-if test "${lt_cv_cc_needs_belf+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-     cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  lt_cv_cc_needs_belf=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-lt_cv_cc_needs_belf=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-esac
-
-need_locks="$enable_libtool_lock"
-
-
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_stdc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Header=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-for ac_header in dlfcn.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# find the maximum length of command line arguments
-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-    i=0
-  testring="ABCD"
-
-  case $host_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
-	       = "XX$testring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$testring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      testring=$testring$testring
-    done
-    testring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    ;;
-  esac
-
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
-  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
-else
-  echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
-fi
-
-
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
-  ;;
-solaris* | sysv5*)
-  symcode='[BDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6
-else
-  echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6
-fi
-
-echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6
-if test "${lt_cv_objdir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6
-objdir=$lt_cv_objdir
-
-
-
-
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  RANLIB=$ac_ct_RANLIB
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  STRIP=$ac_ct_STRIP
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-enable_dlopen=no
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-
-fi;
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi;
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='main(){return(0);}'
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-
-#
-# Check for any special shared library compilation flags.
-#
-lt_prog_cc_shlib=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    lt_prog_cc_shlib='-belf'
-    ;;
-  esac
-fi
-if test -n "$lt_prog_cc_shlib"; then
-  { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5
-echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;}
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$lt_prog_cc_shlib[ 	]" >/dev/null; then :
-  else
-    { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
-echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
-    lt_cv_prog_cc_can_build_shared=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6
-if test "${lt_prog_compiler_static_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_prog_compiler_static"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-     else
-       lt_prog_compiler_static_works=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
-
-if test x"$lt_prog_compiler_static_works" = xyes; then
-    :
-else
-    lt_prog_compiler_static=
-fi
-
-
-
-
-lt_prog_compiler_no_builtin_flag=
-
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-
-  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   save_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-     else
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
-   CFLAGS="$save_CFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-else
-    :
-fi
-
-fi
-
-lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl='-Wl,'
-    lt_prog_compiler_static='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic='-fno-common'
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	lt_prog_compiler_pic='-fPIC'
-      fi
-      ;;
-
-    *)
-      lt_prog_compiler_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      else
-	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" != ia64; then
-	lt_prog_compiler_pic='+Z'
-      fi
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    linux*)
-      if test "$CC" = "icc"; then
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-KPIC'
-	lt_prog_compiler_static='-static'
-      fi
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      lt_prog_compiler_pic='-Kpic'
-      lt_prog_compiler_static='-dn'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl='-Qoption ld '
-      lt_prog_compiler_pic='-PIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      if test "x$host_vendor" = xsni; then
-	lt_prog_compiler_wl='-LD'
-      else
-	lt_prog_compiler_wl='-Wl,'
-      fi
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic='-Kconform_pic'
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic='-pic'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared=no
-      ;;
-    esac
-  fi
-
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
-if test "${lt_prog_compiler_pic_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works=no
-  ac_outfile=conftest.$ac_objext
-   save_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS $lt_prog_compiler_pic -DPIC"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-     else
-       lt_prog_compiler_pic_works=yes
-     fi
-   fi
-   $rm conftest*
-   CFLAGS="$save_CFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
-
-if test x"$lt_prog_compiler_pic_works" = xyes; then
-    case $lt_prog_compiler_pic in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-     esac
-else
-    lt_prog_compiler_pic=
-     lt_prog_compiler_can_build_shared=no
-fi
-
-fi
-case "$host_os" in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
-
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   save_CFLAGS="$CFLAGS"
-		   CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
-
-   if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s out/conftest.err; then
-       # Append any errors to the config.log.
-       cat out/conftest.err 1>&5
-     else
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   CFLAGS="$save_CFLAGS"
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-
-  runpath_var=
-  allow_undefined_flag=
-
-  archive_cmds=
-  archive_cmds_need_lc=
-  archive_expsym_cmds=
-  old_archive_From_new_cmds=
-  old_archive_from_expsyms_cmds=
-  export_dynamic_flag_spec=
-  whole_archive_flag_spec=
-  thread_safe_flag_spec=
-  hardcode_libdir_flag_spec=
-  hardcode_libdir_separator=
-  hardcode_direct=no
-  hardcode_minus_L=no
-  hardcode_shlibpath_var=unsupported
-  link_all_deplibs=unknown
-  always_export_symbols=no
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms=
-  # exclude_expsyms can be an egrep regular expression of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      allow_undefined_flag=unsupported
-      always_export_symbols=yes
-
-      extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-	sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-	test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-	if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-	else $CC -o impgen impgen.c ; fi)~
-	$output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-      old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-      # cygwin and mingw dlls have different entry points and sets of symbols
-      # to exclude.
-      # FIXME: what about values for MSVC?
-      dll_entry=__cygwin_dll_entry@12
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-      case $host_os in
-      mingw*)
-	# mingw values
-	dll_entry=_DllMainCRTStartup@12
-	dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-	;;
-      esac
-
-      # mingw and cygwin differ, and it's simplest to just exclude the union
-      # of the two symbol sets.
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-      # recent cygwin and mingw systems supply a stub DllMain which the user
-      # can override, but on older systems we have to supply one (in ltdll.c)
-      if test "x$lt_cv_need_dllmain" = "xyes"; then
-	ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-	ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-  	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-      else
-	ltdll_obj=
-	ltdll_cmds=
-      fi
-
-      # Extract the symbol export list from an `--export-all' def file,
-      # then regenerate the def file from the symbol export list, so that
-      # the compiled dll only exports the symbol export list.
-      # Be careful not to strip the DATA tag left by newer dlltools.
-      export_symbols_cmds="$ltdll_cmds"'
-	$DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-	sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is.
-      # If DATA tags from a recent dlltool are present, honour them!
-      archive_expsym_cmds='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname-def;
-	else
-	  echo EXPORTS > $output_objdir/$soname-def;
-	  _lt_hint=1;
-	  cat $export_symbols | while read symbol; do
-	   set dummy \$symbol;
-	   case \$# in
-	     2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	     *) echo "   \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
-	   esac;
-	   _lt_hint=`expr 1 + \$_lt_hint`;
-	  done;
-	fi~
-	'"$ltdll_cmds"'
-	$CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-	$CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-	$CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris* | sysv5*)
-      if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    sunos4*)
-      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs" = yes; then
-      runpath_var=LD_RUN_PATH
-      hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-      export_dynamic_flag_spec='${wl}--export-dynamic'
-      case $host_os in
-      cygwin* | mingw* | pw32*)
-	# dlltool doesn't understand --whole-archive et. al.
-	whole_archive_flag_spec=
-	;;
-      *)
-	# ancient GNU ld didn't support --whole-archive et. al.
-	if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-  	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	else
-  	whole_archive_flag_spec=
-	fi
-	;;
-      esac
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag=unsupported
-      always_export_symbols=yes
-      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-
-	# KDE requires run time linking.  Make it the default.
-	aix_use_runtimelinking=yes
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds=''
-      hardcode_direct=yes
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.012|aix4.012.*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  hardcode_direct=yes
-	  else
-  	  # We have old collect2
-  	  hardcode_direct=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L=yes
-  	  hardcode_libdir_flag_spec='-L$libdir'
-  	  hardcode_libdir_separator=
-	  fi
-	esac
-	shared_flag='-shared'
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-  	if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='-qmkshrobj ${wl}-G'
-	  else
-	    shared_flag='-qmkshrobj'
-  	fi
-	fi
-      fi
-
-      # Let the compiler handle the export list.
-      always_export_symbols=no
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  always_export_symbols=yes
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec=' '
-	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs=no
-      ;;
-
-    bsdi4*)
-      export_dynamic_flag_spec=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      allow_undefined_flag=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      ;;
-
-    darwin* | rhapsody*)
-      case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	allow_undefined_flag='-flat_namespace -undefined suppress'
-	;;
-      esac
-
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-      archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-      # We need to add '_' to the symbols in $export_symbols first
-      #_LT_AC_TAGVAR(archive_expsym_cmds, )="$_LT_AC_TAGVAR(archive_cmds, )"' && strip -s $export_symbols'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      whole_archive_flag_spec='-all_load $convenience'
-      ;;
-
-    dgux*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
-      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      if test "$GCC" = yes; then
-	case $host_os in
-	  hpux9*)
-	    archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    else
-	      archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	    fi
-	    ;;
-	esac
-      else
-	case $host_os in
-	  hpux9*)
-	    archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-	    else
-	      archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-	    fi
-	    ;;
-	esac
-      fi
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec='-L$libdir'
-	hardcode_direct=no
-	hardcode_shlibpath_var=no
-      else
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
-	hardcode_direct=yes
-      fi
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      link_all_deplibs=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    newsos6)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_shlibpath_var=no
-      ;;
-
-    openbsd*)
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      allow_undefined_flag=unsupported
-      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      hardcode_libdir_separator=:
-      ;;
-
-    sco3.2v5*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
-    solaris*)
-      no_undefined_flag=' -z text'
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_shlibpath_var=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-      esac
-      link_all_deplibs=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv4)
-      if test "x$host_vendor" = xsni; then
-	archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_direct=yes # is this really true???
-      else
-	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-      fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs=yes
-      fi
-      ;;
-
-    sysv4.2uw2*)
-      archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=no
-      hardcode_shlibpath_var=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
-
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
-      no_undefined_flag='${wl}-z ${wl}text'
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv5*)
-      no_undefined_flag=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      hardcode_libdir_flag_spec=
-      hardcode_shlibpath_var=no
-      runpath_var='LD_RUN_PATH'
-      ;;
-
-    uts4*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      ld_shlibs=no
-      ;;
-    esac
-  fi
-
-echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6
-test "$ld_shlibs" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-#
-# Do we need to explicitly link libc?
-#
-archive_cmds_need_lc=yes
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $archive_cmds in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-    $rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$lt_prog_compiler_wl
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      lt_save_allow_undefined_flag=$allow_undefined_flag
-      allow_undefined_flag=
-      if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-      then
-	archive_cmds_need_lc=no
-      else
-	archive_cmds_need_lc=yes
-      fi
-      allow_undefined_flag=$lt_save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi
-    $rm conftest*
-    echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6
-    ;;
-  esac
-fi
-
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var "; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6
-
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"`
-    if echo "$sys_lib_search_path_spec" | egrep ';[C-Z]:/' >/dev/null; then
-      # It is most probably a Windows format PATH printed by
-      # mingw gcc, but we are running on Cygwin. Gcc prints its search
-      # path with ; separators, and with drive letters. We can handle the
-      # drive letters (cygwin fileutils understands them), so leave them,
-      # especially as we might pass files found there to a mingw objdump,
-      # which wouldn't understand a cygwinified path. Ahh.
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'`
-    else
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed  -e "s/$PATH_SEPARATOR/ /g"`
-    fi
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.01* | freebsdelf3.01*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  *) # from 3.2 on
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test "$host_cpu" = ia64; then
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    soname_spec='${libname}${release}.so$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-  else
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-    soname_spec='${libname}${release}.sl$major'
-  fi
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)          version_type=irix ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  libsuff=
-  if test "x$LINUX_64_MODE" = x64; then
-    # Some platforms are per default 64-bit, so there's no /lib64
-    if test -d /lib64; then
-      libsuff=64
-    fi
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != shl_load;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-int
-main ()
-{
-shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != dlopen;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dld_link ();
-int
-main ()
-{
-dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 10220 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 10318 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
-
-# Report which librarie types wil actually be built
-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6
-
-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6
-
-echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler \
-    CC \
-    LD \
-    lt_prog_compiler_wl \
-    lt_prog_compiler_pic \
-    lt_prog_compiler_static \
-    lt_prog_compiler_no_builtin_flag \
-    export_dynamic_flag_spec \
-    thread_safe_flag_spec \
-    whole_archive_flag_spec \
-    old_archive_cmds \
-    old_archive_from_new_cmds \
-    predep_objects \
-    postdep_objects \
-    predeps \
-    postdeps \
-    compiler_lib_search_path \
-    archive_cmds \
-    archive_expsym_cmds \
-    postinstall_cmds \
-    postuninstall_cmds \
-    old_archive_from_expsyms_cmds \
-    allow_undefined_flag \
-    no_undefined_flag \
-    export_symbols_cmds \
-    hardcode_libdir_flag_spec \
-    hardcode_libdir_separator \
-    lt_cv_prog_compiler_c_o \
-    exclude_expsyms \
-    include_expsyms; do
-
-    case $var in
-    old_archive_cmds | \
-    old_archive_from_new_cmds | \
-    archive_cmds | \
-    archive_expsym_cmds | \
-    old_archive_from_expsyms_cmds | \
-    export_symbols_cmds | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  { echo "$as_me:$LINENO: creating $ofile" >&5
-echo "$as_me: creating $ofile" >&6;}
-
-  cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "$cfgfile"
-    # This is a source program that is used to create dlls on Windows
-    # Don't remove nor modify the starting and closing comments
-
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-
-    # This is a source program that is used to create import libraries
-    # on Windows for dlls which lack them. Don't remove nor modify the
-    # starting and closing comments
-
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
-
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-# Check whether --with-tags or --without-tags was given.
-if test "${with_tags+set}" = set; then
-  withval="$with_tags"
-  tagnames="$withval"
-else
-  tagnames="CXX,GCJ"
-    case $host_os in
-      mingw*|cygwin*) tagnames="$tagnames,RC" ;;
-    esac
-fi;
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-    else
-      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-    fi
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-    "") ;;
-    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-echo "$as_me: error: invalid tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-
-# Source file extension for C test sources.
-ac_ext=cc
-
-# Object file extension for compiled C test sources.
-objext=o
-objext_CXX=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int char *) { return(0); }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${CXX-"c++"}
-set dummy $CC
-compiler="$2"
-compiler_CXX=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
-  lt_prog_compiler_no_builtin_flag_CXX=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if eval "`$CC -print-prog-name=ld` --version 2>&1" | \
-      egrep 'GNU ld' > /dev/null; then
-    with_gnu_ld=yes
-
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	egrep 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      whole_archive_flag_spec_CXX=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-ld_shlibs_CXX=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      # KDE requires run time linking.  Make it the default.
-      aix_use_runtimelinking=yes
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    archive_cmds_CXX=''
-    hardcode_direct_CXX=yes
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.012|aix4.012.*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  hardcode_direct_CXX=yes
-	else
-	  # We have old collect2
-	  hardcode_direct_CXX=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L_CXX=yes
-	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  hardcode_libdir_separator_CXX=
-	fi
-      esac
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='-qmkshrobj ${wl}-G'
-	else
-	  shared_flag='-qmkshrobj'
-	fi
-      fi
-    fi
-
-    # Let the compiler handle the export list.
-    always_export_symbols_CXX=no
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag_CXX='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      archive_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag_CXX="-z nodefs"
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	no_undefined_flag_CXX=' ${wl}-bernotok'
-	allow_undefined_flag_CXX=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	always_export_symbols_CXX=yes
-	# Exported symbols can be pulled into shared objects from archives
-	whole_archive_flag_spec_CXX=' '
-	archive_cmds_need_lc_CXX=yes
-	# This is similar to how AIX traditionally builds it's shared libraries.
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  dgux*)
-    case $cc_basename in
-      ec++)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      ghcx)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  freebsd12*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    ld_shlibs_CXX=no
-    ;;
-  freebsd-elf*)
-    archive_cmds_need_lc_CXX=no
-    ;;
-  freebsd*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    ld_shlibs_CXX=yes
-    ;;
-  gnu*)
-    ;;
-  hpux*)
-    if test $with_gnu_ld = no; then
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec_CXX='-L$libdir'
-      else
-	hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
-	export_dynamic_flag_spec_CXX='${wl}-E'
-      fi
-    fi
-    if test "$host_cpu" = ia64; then
-      hardcode_direct_CXX=no
-      hardcode_shlibpath_var_CXX=no
-    else
-      hardcode_direct_CXX=yes
-    fi
-    hardcode_minus_L_CXX=yes # Not in the search PATH,
-					    # but as the default
-					    # location of the library.
-
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      aCC)
-	case $host_os in
-	hpux9*)
-	  archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	  ;;
-	*)
-	  if test "$host_cpu" = ia64; then
-	    archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	  else
-	    archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  fi
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_os in
-	    hpux9*)
-	      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	      ;;
-	    *)
-	      if test "$host_cpu" = ia64; then
-		archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	      else
-		archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      fi
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC)
-	# SGI C++
-	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-	  else
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
-	  fi
-	fi
-	link_all_deplibs_CXX=yes
-	;;
-    esac
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    ;;
-  linux*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	archive_expsym_cmds_CXX='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc)
-	# Intel C++
-	with_gnu_ld=yes
-	archive_cmds_need_lc_CXX=no
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      cxx)
-	# Compaq C++
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    # NetBSD uses g++ - do we need to do anything?
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx)
-	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-	;;
-      RCC)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx)
-	allow_undefined_flag_CXX=' -expect_unresolved \*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  sco*)
-    archive_cmds_need_lc_CXX=no
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      lcc)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC)
-	# Sun C++ 4.2, 5.x and Centerline C++
-	no_undefined_flag_CXX=' -zdefs'
-	archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-R$libdir'
-	hardcode_shlibpath_var_CXX=no
-	case $host_os in
-	  solaris2.0-5 | solaris2.0-5.*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	link_all_deplibs_CXX=yes
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx)
-	# Green Hills C++ Compiler
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-	  if $CC --version | egrep -v '^2\.7' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\""
-	  fi
-
-	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
-    archive_cmds_need_lc_CXX=no
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-esac
-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-# Figure out "hidden" C++ library dependencies from verbose
-# compiler output whening linking a shared library.
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
-	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
-	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext|*.$libext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
-	 else
-	   predep_objects_CXX="$predep_objects_CXX $p"
-	 fi
-       else
-	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
-	 else
-	   postdep_objects_CXX="$postdep_objects_CXX $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out
-else
-  echo "libtool.m4: error: problem compiling C++ test program"
-fi
-
-$rm -f confest.$objext
-
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-*) archive_cmds_need_lc_CXX=yes ;;
-esac
-
-GCC_CXX="$GXX"
-LD_CXX="$LD"
-
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
-
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    lt_prog_compiler_wl_CXX='-Wl,'
-    lt_prog_compiler_static_CXX='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_CXX='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    cygwin* | mingw* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_CXX='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      lt_prog_compiler_pic_CXX=
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_CXX=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	lt_prog_compiler_pic_CXX='-fPIC'
-      fi
-      ;;
-    *)
-      lt_prog_compiler_pic_CXX='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix4* | aix5*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  lt_prog_compiler_static_CXX='-Bstatic'
-	else
-	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-      dgux*)
-	case $cc_basename in
-	  ec++)
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  ghcx)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      lt_prog_compiler_pic_CXX='+Z'
-	    fi
-	    ;;
-	  aCC)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      lt_prog_compiler_pic_CXX='+Z'
-	    fi
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux*)
-	case $cc_basename in
-	  KCC)
-	    # KAI C++ Compiler
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  icpc)
-	    # Intel C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-static'
-	    ;;
-	  cxx)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx)
-	    lt_prog_compiler_pic_CXX='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC)
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    ;;
-	  RCC)
-	    # Rational C++ 2.4.1
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  cxx)
-	    # Digital/Compaq C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      sco*)
-	case $cc_basename in
-	  CC)
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    lt_prog_compiler_wl_CXX='-Qoption ld '
-	    ;;
-	  gcx)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC)
-	    # Sun C++ 4.x
-	    lt_prog_compiler_pic_CXX='-pic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  lcc)
-	    # Lucid
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC)
-	    # NonStop-UX NCC 3.20
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      unixware*)
-	;;
-      vxworks*)
-	;;
-      *)
-	lt_prog_compiler_can_build_shared_CXX=no
-	;;
-    esac
-  fi
-
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6
-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works_CXX=no
-  ac_outfile=conftest.$ac_objext
-   save_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS $lt_prog_compiler_pic_CXX -DPIC"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-     else
-       lt_prog_compiler_pic_works_CXX=yes
-     fi
-   fi
-   $rm conftest*
-   CFLAGS="$save_CFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6
-
-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
-    case $lt_prog_compiler_pic_CXX in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-     esac
-else
-    lt_prog_compiler_pic_CXX=
-     lt_prog_compiler_can_build_shared_CXX=no
-fi
-
-fi
-case "$host_os" in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_CXX=
-    ;;
-  *)
-    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-    ;;
-esac
-
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o_CXX=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   save_CXXFLAGS="$CXXFLAGS"
-		   CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
-
-   if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s out/conftest.err; then
-       # Append any errors to the config.log.
-       cat out/conftest.err 1>&5
-     else
-       lt_cv_prog_compiler_c_o_CXX=yes
-     fi
-   fi
-   CXXFLAGS="$save_CXXFLAGS"
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-
-  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix4* | aix5*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  cygwin* | mingw* | pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
-  ;;
-  *)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-
-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-#
-# Do we need to explicitly link libc?
-#
-archive_cmds_need_lc_CXX=yes
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $archive_cmds_CXX in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-    $rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$lt_prog_compiler_wl_CXX
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-      allow_undefined_flag_CXX=
-      if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-      then
-	archive_cmds_need_lc_CXX=no
-      else
-	archive_cmds_need_lc_CXX=yes
-      fi
-      allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi
-    $rm conftest*
-    echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6
-    ;;
-  esac
-fi
-
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var CXX"; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_CXX" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_CXX=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_CXX=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_CXX=unsupported
-fi
-echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-echo "${ECHO_T}$hardcode_action_CXX" >&6
-
-if test "$hardcode_action_CXX" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"`
-    if echo "$sys_lib_search_path_spec" | egrep ';[C-Z]:/' >/dev/null; then
-      # It is most probably a Windows format PATH printed by
-      # mingw gcc, but we are running on Cygwin. Gcc prints its search
-      # path with ; separators, and with drive letters. We can handle the
-      # drive letters (cygwin fileutils understands them), so leave them,
-      # especially as we might pass files found there to a mingw objdump,
-      # which wouldn't understand a cygwinified path. Ahh.
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'`
-    else
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed  -e "s/$PATH_SEPARATOR/ /g"`
-    fi
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.01* | freebsdelf3.01*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  *) # from 3.2 on
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test "$host_cpu" = ia64; then
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    soname_spec='${libname}${release}.so$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-  else
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-    soname_spec='${libname}${release}.sl$major'
-  fi
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)          version_type=irix ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  libsuff=
-  if test "x$LINUX_64_MODE" = x64; then
-    # Some platforms are per default 64-bit, so there's no /lib64
-    if test -d /lib64; then
-      libsuff=64
-    fi
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != shl_load;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-int
-main ()
-{
-shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != dlopen;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dld_link ();
-int
-main ()
-{
-dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 13544 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 13642 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_CXX \
-    CC_CXX \
-    LD_CXX \
-    lt_prog_compiler_wl_CXX \
-    lt_prog_compiler_pic_CXX \
-    lt_prog_compiler_static_CXX \
-    lt_prog_compiler_no_builtin_flag_CXX \
-    export_dynamic_flag_spec_CXX \
-    thread_safe_flag_spec_CXX \
-    whole_archive_flag_spec_CXX \
-    old_archive_cmds_CXX \
-    old_archive_from_new_cmds_CXX \
-    predep_objects_CXX \
-    postdep_objects_CXX \
-    predeps_CXX \
-    postdeps_CXX \
-    compiler_lib_search_path_CXX \
-    archive_cmds_CXX \
-    archive_expsym_cmds_CXX \
-    postinstall_cmds_CXX \
-    postuninstall_cmds_CXX \
-    old_archive_from_expsyms_cmds_CXX \
-    allow_undefined_flag_CXX \
-    no_undefined_flag_CXX \
-    export_symbols_cmds_CXX \
-    hardcode_libdir_flag_spec_CXX \
-    hardcode_libdir_separator_CXX \
-    lt_cv_prog_compiler_c_o_CXX \
-    exclude_expsyms_CXX \
-    include_expsyms_CXX; do
-
-    case $var in
-    old_archive_cmds_CXX | \
-    old_archive_from_new_cmds_CXX | \
-    archive_cmds_CXX | \
-    archive_expsym_cmds_CXX | \
-    old_archive_from_expsyms_cmds_CXX | \
-    export_symbols_cmds_CXX | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_compiler_CXX
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
-
-# The linker used to build libraries.
-LD=$lt_LD_CXX
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_CXX"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	;;
-
-      GCJ)
-
-
-
-# Source file extension for C test sources.
-ac_ext=java
-
-# Object file extension for compiled C test sources.
-objext=o
-objext_GCJ=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-set dummy $CC
-compiler="$2"
-compiler_GCJ=$CC
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
-
-
-lt_prog_compiler_no_builtin_flag_GCJ=
-
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-
-  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   save_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-     else
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
-   CFLAGS="$save_CFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-else
-    :
-fi
-
-fi
-
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
-
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_GCJ='-Wl,'
-    lt_prog_compiler_static_GCJ='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_GCJ='-fno-common'
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_GCJ=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_GCJ=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX, but not for PA HP-UX.
-      if test "$host_cpu" != ia64; then
-	lt_prog_compiler_pic_GCJ='-fPIC'
-      fi
-      ;;
-
-    *)
-      lt_prog_compiler_pic_GCJ='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      else
-	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      if test "$host_cpu" != ia64; then
-	lt_prog_compiler_pic_GCJ='+Z'
-      fi
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    linux*)
-      if test "$CC" = "icc"; then
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-KPIC'
-	lt_prog_compiler_static_GCJ='-static'
-      fi
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      lt_prog_compiler_pic_GCJ='-Kpic'
-      lt_prog_compiler_static_GCJ='-dn'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl_GCJ='-Qoption ld '
-      lt_prog_compiler_pic_GCJ='-PIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      if test "x$host_vendor" = xsni; then
-	lt_prog_compiler_wl_GCJ='-LD'
-      else
-	lt_prog_compiler_wl_GCJ='-Wl,'
-      fi
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_GCJ='-Kconform_pic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic_GCJ='-pic'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
-    esac
-  fi
-
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6
-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_pic_works_GCJ=no
-  ac_outfile=conftest.$ac_objext
-   save_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS $lt_prog_compiler_pic_GCJ -DPIC"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-     else
-       lt_prog_compiler_pic_works_GCJ=yes
-     fi
-   fi
-   $rm conftest*
-   CFLAGS="$save_CFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6
-
-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
-    case $lt_prog_compiler_pic_GCJ in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-     esac
-else
-    lt_prog_compiler_pic_GCJ=
-     lt_prog_compiler_can_build_shared_GCJ=no
-fi
-
-fi
-case "$host_os" in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_GCJ=
-    ;;
-  *)
-    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ -DPIC"
-    ;;
-esac
-
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o_GCJ=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   save_GCJFLAGS="$GCJFLAGS"
-		   GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-   # that will create temporary files in the current directory regardless of
-   # the output directory.  Thus, making CWD read-only will cause this test
-   # to fail, enabling locking or at least warning the user not to do parallel
-   # builds.
-   chmod -w .
-
-   if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s out/conftest.err; then
-       # Append any errors to the config.log.
-       cat out/conftest.err 1>&5
-     else
-       lt_cv_prog_compiler_c_o_GCJ=yes
-     fi
-   fi
-   GCJFLAGS="$save_GCJFLAGS"
-   chmod u+w .
-   $rm conftest* out/*
-   rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-
-  runpath_var=
-  allow_undefined_flag_GCJ=
-
-  archive_cmds_GCJ=
-  archive_cmds_need_lc_GCJ=
-  archive_expsym_cmds_GCJ=
-  old_archive_From_new_cmds_GCJ=
-  old_archive_from_expsyms_cmds_GCJ=
-  export_dynamic_flag_spec_GCJ=
-  whole_archive_flag_spec_GCJ=
-  thread_safe_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_GCJ=
-  hardcode_libdir_separator_GCJ=
-  hardcode_direct_GCJ=no
-  hardcode_minus_L_GCJ=no
-  hardcode_shlibpath_var_GCJ=unsupported
-  link_all_deplibs_GCJ=unknown
-  always_export_symbols_GCJ=no
-  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_GCJ=
-  # exclude_expsyms can be an egrep regular expression of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs_GCJ=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_GCJ=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_GCJ=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=yes
-
-      extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-	sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-	test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-	if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-	else $CC -o impgen impgen.c ; fi)~
-	$output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-      old_archive_from_expsyms_cmds_GCJ='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-      # cygwin and mingw dlls have different entry points and sets of symbols
-      # to exclude.
-      # FIXME: what about values for MSVC?
-      dll_entry=__cygwin_dll_entry@12
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-      case $host_os in
-      mingw*)
-	# mingw values
-	dll_entry=_DllMainCRTStartup@12
-	dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-	;;
-      esac
-
-      # mingw and cygwin differ, and it's simplest to just exclude the union
-      # of the two symbol sets.
-      dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-      # recent cygwin and mingw systems supply a stub DllMain which the user
-      # can override, but on older systems we have to supply one (in ltdll.c)
-      if test "x$lt_cv_need_dllmain" = "xyes"; then
-	ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-	ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-  	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-      else
-	ltdll_obj=
-	ltdll_cmds=
-      fi
-
-      # Extract the symbol export list from an `--export-all' def file,
-      # then regenerate the def file from the symbol export list, so that
-      # the compiled dll only exports the symbol export list.
-      # Be careful not to strip the DATA tag left by newer dlltools.
-      export_symbols_cmds_GCJ="$ltdll_cmds"'
-	$DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-	sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is.
-      # If DATA tags from a recent dlltool are present, honour them!
-      archive_expsym_cmds_GCJ='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname-def;
-	else
-	  echo EXPORTS > $output_objdir/$soname-def;
-	  _lt_hint=1;
-	  cat $export_symbols | while read symbol; do
-	   set dummy \$symbol;
-	   case \$# in
-	     2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	     *) echo "   \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
-	   esac;
-	   _lt_hint=`expr 1 + \$_lt_hint`;
-	  done;
-	fi~
-	'"$ltdll_cmds"'
-	$CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-	$CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-	$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-	$CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_GCJ='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris* | sysv5*)
-      if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    sunos4*)
-      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs_GCJ" = yes; then
-      runpath_var=LD_RUN_PATH
-      hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-      export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-      case $host_os in
-      cygwin* | mingw* | pw32*)
-	# dlltool doesn't understand --whole-archive et. al.
-	whole_archive_flag_spec_GCJ=
-	;;
-      *)
-	# ancient GNU ld didn't support --whole-archive et. al.
-	if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-  	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	else
-  	whole_archive_flag_spec_GCJ=
-	fi
-	;;
-      esac
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=yes
-      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_GCJ=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_GCJ=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
-	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-
-	# KDE requires run time linking.  Make it the default.
-	aix_use_runtimelinking=yes
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds_GCJ=''
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.012|aix4.012.*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  hardcode_direct_GCJ=yes
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_GCJ=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_GCJ=yes
-  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-  	  hardcode_libdir_separator_GCJ=
-	  fi
-	esac
-	shared_flag='-shared'
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-  	if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='-qmkshrobj ${wl}-G'
-	  else
-	    shared_flag='-qmkshrobj'
-  	fi
-	fi
-      fi
-
-      # Let the compiler handle the export list.
-      always_export_symbols_GCJ=no
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_GCJ='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
-	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_GCJ="-z nodefs"
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_GCJ=' ${wl}-bernotok'
-	  allow_undefined_flag_GCJ=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  always_export_symbols_GCJ=yes
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_GCJ=' '
-	  archive_cmds_need_lc_GCJ=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_GCJ=no
-      ;;
-
-    bsdi4*)
-      export_dynamic_flag_spec_GCJ=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ=' '
-      allow_undefined_flag_GCJ=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_GCJ='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      ;;
-
-    darwin* | rhapsody*)
-      case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag_GCJ='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-	allow_undefined_flag_GCJ='-flat_namespace -undefined suppress'
-	;;
-      esac
-
-      # FIXME: Relying on posixy $() will cause problems for
-      #        cross-compilation, but unfortunately the echo tests do not
-      #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-      #	       `"' quotes if we put them in here... so don't!
-      archive_cmds_GCJ='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
-      # We need to add '_' to the symbols in $export_symbols first
-      #_LT_AC_TAGVAR(archive_expsym_cmds, GCJ)="$_LT_AC_TAGVAR(archive_cmds, GCJ)"' && strip -s $export_symbols'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      whole_archive_flag_spec_GCJ='-all_load $convenience'
-      ;;
-
-    dgux*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs_GCJ=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd*)
-      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      if test "$GCC" = yes; then
-	case $host_os in
-	  hpux9*)
-	    archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    else
-	      archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	    fi
-	    ;;
-	esac
-      else
-	case $host_os in
-	  hpux9*)
-	    archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-	    ;;
-	  *)
-	    if test "$host_cpu" = ia64; then
-	      archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-	    else
-	      archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-	    fi
-	    ;;
-	esac
-      fi
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec_GCJ='-L$libdir'
-	hardcode_direct_GCJ=no
-	hardcode_shlibpath_var_GCJ=no
-      else
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-	hardcode_direct_GCJ=yes
-      fi
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    newsos6)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    openbsd*)
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_GCJ='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      allow_undefined_flag_GCJ=unsupported
-      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    sco3.2v5*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
-    solaris*)
-      no_undefined_flag_GCJ=' -z text'
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
-      esac
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4)
-      if test "x$host_vendor" = xsni; then
-	archive_cmds_GCJ='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_direct_GCJ=yes # is this really true???
-      else
-	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-      fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_GCJ=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_GCJ=yes
-      fi
-      ;;
-
-    sysv4.2uw2*)
-      archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
-
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
-      no_undefined_flag_GCJ='${wl}-z ${wl}text'
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv5*)
-      no_undefined_flag_GCJ=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      hardcode_libdir_flag_spec_GCJ=
-      hardcode_shlibpath_var_GCJ=no
-      runpath_var='LD_RUN_PATH'
-      ;;
-
-    uts4*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      ld_shlibs_GCJ=no
-      ;;
-    esac
-  fi
-
-echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-echo "${ECHO_T}$ld_shlibs_GCJ" >&6
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-#
-# Do we need to explicitly link libc?
-#
-archive_cmds_need_lc_GCJ=yes
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $archive_cmds_GCJ in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-    $rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$lt_prog_compiler_wl_GCJ
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-      allow_undefined_flag_GCJ=
-      if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-      then
-	archive_cmds_need_lc_GCJ=no
-      else
-	archive_cmds_need_lc_GCJ=yes
-      fi
-      allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi
-    $rm conftest*
-    echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6
-    ;;
-  esac
-fi
-
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var GCJ"; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_GCJ" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-     test "$hardcode_minus_L_GCJ" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_GCJ=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_GCJ=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_GCJ=unsupported
-fi
-echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-echo "${ECHO_T}$hardcode_action_GCJ" >&6
-
-if test "$hardcode_action_GCJ" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"`
-    if echo "$sys_lib_search_path_spec" | egrep ';[C-Z]:/' >/dev/null; then
-      # It is most probably a Windows format PATH printed by
-      # mingw gcc, but we are running on Cygwin. Gcc prints its search
-      # path with ; separators, and with drive letters. We can handle the
-      # drive letters (cygwin fileutils understands them), so leave them,
-      # especially as we might pass files found there to a mingw objdump,
-      # which wouldn't understand a cygwinified path. Ahh.
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'`
-    else
-      sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed  -e "s/$PATH_SEPARATOR/ /g"`
-    fi
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.01* | freebsdelf3.01*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  *) # from 3.2 on
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test "$host_cpu" = ia64; then
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    soname_spec='${libname}${release}.so$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-  else
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-    soname_spec='${libname}${release}.sl$major'
-  fi
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)          version_type=irix ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  libsuff=
-  if test "x$LINUX_64_MODE" = x64; then
-    # Some platforms are per default 64-bit, so there's no /lib64
-    if test -d /lib64; then
-      libsuff=64
-    fi
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != shl_load;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-int
-main ()
-{
-shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != dlopen;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dld_link ();
-int
-main ()
-{
-dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 16381 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 16479 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_GCJ \
-    CC_GCJ \
-    LD_GCJ \
-    lt_prog_compiler_wl_GCJ \
-    lt_prog_compiler_pic_GCJ \
-    lt_prog_compiler_static_GCJ \
-    lt_prog_compiler_no_builtin_flag_GCJ \
-    export_dynamic_flag_spec_GCJ \
-    thread_safe_flag_spec_GCJ \
-    whole_archive_flag_spec_GCJ \
-    old_archive_cmds_GCJ \
-    old_archive_from_new_cmds_GCJ \
-    predep_objects_GCJ \
-    postdep_objects_GCJ \
-    predeps_GCJ \
-    postdeps_GCJ \
-    compiler_lib_search_path_GCJ \
-    archive_cmds_GCJ \
-    archive_expsym_cmds_GCJ \
-    postinstall_cmds_GCJ \
-    postuninstall_cmds_GCJ \
-    old_archive_from_expsyms_cmds_GCJ \
-    allow_undefined_flag_GCJ \
-    no_undefined_flag_GCJ \
-    export_symbols_cmds_GCJ \
-    hardcode_libdir_flag_spec_GCJ \
-    hardcode_libdir_separator_GCJ \
-    lt_cv_prog_compiler_c_o_GCJ \
-    exclude_expsyms_GCJ \
-    include_expsyms_GCJ; do
-
-    case $var in
-    old_archive_cmds_GCJ | \
-    old_archive_from_new_cmds_GCJ | \
-    archive_cmds_GCJ | \
-    archive_expsym_cmds_GCJ | \
-    old_archive_from_expsyms_cmds_GCJ | \
-    export_symbols_cmds_GCJ | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
-
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_GCJ"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	;;
-
-      RC)
-
-
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-set dummy $CC
-compiler="$2"
-compiler_RC=$CC
-lt_cv_prog_compiler_c_o_RC=yes
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_RC \
-    CC_RC \
-    LD_RC \
-    lt_prog_compiler_wl_RC \
-    lt_prog_compiler_pic_RC \
-    lt_prog_compiler_static_RC \
-    lt_prog_compiler_no_builtin_flag_RC \
-    export_dynamic_flag_spec_RC \
-    thread_safe_flag_spec_RC \
-    whole_archive_flag_spec_RC \
-    old_archive_cmds_RC \
-    old_archive_from_new_cmds_RC \
-    predep_objects_RC \
-    postdep_objects_RC \
-    predeps_RC \
-    postdeps_RC \
-    compiler_lib_search_path_RC \
-    archive_cmds_RC \
-    archive_expsym_cmds_RC \
-    postinstall_cmds_RC \
-    postuninstall_cmds_RC \
-    old_archive_from_expsyms_cmds_RC \
-    allow_undefined_flag_RC \
-    no_undefined_flag_RC \
-    export_symbols_cmds_RC \
-    hardcode_libdir_flag_spec_RC \
-    hardcode_libdir_separator_RC \
-    lt_cv_prog_compiler_c_o_RC \
-    exclude_expsyms_RC \
-    include_expsyms_RC; do
-
-    case $var in
-    old_archive_cmds_RC | \
-    old_archive_from_new_cmds_RC | \
-    archive_cmds_RC | \
-    archive_expsym_cmds_RC | \
-    old_archive_from_expsyms_cmds_RC | \
-    export_symbols_cmds_RC | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_compiler_RC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
-
-# The linker used to build libraries.
-LD=$lt_LD_RC
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_RC"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	;;
-
-      *)
-	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      available_tags="$available_tags $tagname"
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-fi
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent'
-
-# Prevent multiple expansion
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-LIBTOOL_SHELL="/bin/sh ./libtool"
-#  LIBTOOL="$LIBTOOL --silent"
-KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)"
-
-
-# Check whether --enable-objprelink or --disable-objprelink was given.
-if test "${enable_objprelink+set}" = set; then
-  enableval="$enable_objprelink"
-  kde_use_objprelink=$enableval
-else
-  kde_use_objprelink=no
-fi;
-  if test "x$kde_use_objprelink" = "xyes"; then
-        { echo "$as_me:$LINENO: WARNING:
-------------------------------------------------------------
-Configuration option --enable-objprelink is no longer useful.
-See http:://objprelink.sourceforge.net for details:
-1- Recent binutils are fast enough to do without objprelink.
-2- Newer versions of objprelink do not need this option.
-------------------------------------------------------------
-" >&5
-echo "$as_me: WARNING:
-------------------------------------------------------------
-Configuration option --enable-objprelink is no longer useful.
-See http:://objprelink.sourceforge.net for details:
-1- Recent binutils are fast enough to do without objprelink.
-2- Newer versions of objprelink do not need this option.
-------------------------------------------------------------
-" >&2;}
-  fi
-
-
-
-
-    # Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_MSGFMT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case "$MSGFMT" in
-  /*)
-  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"; then
-	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
-  ;;
-esac
-fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test -n "$MSGFMT"; then
-  echo "$as_me:$LINENO: result: $MSGFMT" >&5
-echo "${ECHO_T}$MSGFMT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-    # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_GMSGFMT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $GMSGFMT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
-  ;;
-esac
-fi
-GMSGFMT=$ac_cv_path_GMSGFMT
-
-if test -n "$GMSGFMT"; then
-  echo "$as_me:$LINENO: result: $GMSGFMT" >&5
-echo "${ECHO_T}$GMSGFMT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-     if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
-        echo "$as_me:$LINENO: result: found msgfmt program is not GNU msgfmt; ignore it" >&5
-echo "${ECHO_T}found msgfmt program is not GNU msgfmt; ignore it" >&6
-        GMSGFMT=":"
-      fi
-      MSGFMT=$GMSGFMT
-
-
-
-      # Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_XGETTEXT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case "$XGETTEXT" in
-  /*)
-  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
-	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
-  ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test -n "$XGETTEXT"; then
-  echo "$as_me:$LINENO: result: $XGETTEXT" >&5
-echo "${ECHO_T}$XGETTEXT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-            if test "$XGETTEXT" != ":"; then
-			if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  echo "$as_me:$LINENO: result: found xgettext programs is not GNU xgettext; ignore it" >&5
-echo "${ECHO_T}found xgettext programs is not GNU xgettext; ignore it" >&6
-	  XGETTEXT=":"
-	fi
-      fi
-
-
-
-
-
-if test -z "3"; then
-  # Current default Qt version: 3.1
-  kde_qtver=3
-  kde_qtsubver=1
-else
-  kde_qtsubver=`echo "3" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'`
-  # following is the check if subversion isnt found in passed argument
-  if test "$kde_qtsubver" = "3"; then
-    kde_qtsubver=1
-  fi
-  kde_qtver=`echo "3" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'`
-  if test "$kde_qtver" = "1"; then
-    kde_qtsubver=42
-  fi
-fi
-
-if test -z ""; then
-  if test "$kde_qtver" = "2"; then
-    if test $kde_qtsubver -gt 0; then
-      kde_qt_minversion=">= Qt 2.2.2"
-    else
-      kde_qt_minversion=">= Qt 2.0.2"
-    fi
-  fi
-  if test "$kde_qtver" = "3"; then
-    if test $kde_qtsubver -gt 0; then
-      kde_qt_minversion=">= Qt 3.1 (20021021)"
-    else
-      kde_qt_minversion=">= Qt 3.0"
-    fi
-  fi
-  if test "$kde_qtver" = "1"; then
-    kde_qt_minversion=">= 1.42 and < 2.0"
-  fi
-else
-   kde_qt_minversion=
-fi
-
-if test -z ""; then
-   if test $kde_qtver = 3; then
-     if test $kde_qtsubver -gt 0; then
-       kde_qt_verstring="TQT_VERSION >= 0x030100"
-     else
-       kde_qt_verstring="TQT_VERSION >= 300"
-     fi
-   fi
-   if test $kde_qtver = 2; then
-     if test $kde_qtsubver -gt 0; then
-       kde_qt_verstring="TQT_VERSION >= 222"
-     else
-       kde_qt_verstring="TQT_VERSION >= 200"
-     fi
-   fi
-   if test $kde_qtver = 1; then
-    kde_qt_verstring="TQT_VERSION >= 142 && TQT_VERSION < 200"
-   fi
-else
-   kde_qt_verstring=
-fi
-
-if test $kde_qtver = 3; then
-  kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3"
-fi
-if test $kde_qtver = 2; then
-   kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
-fi
-if test $kde_qtver = 1; then
-   kde_qt_dirs="$QTDIR /usr/lib/qt"
-fi
-
-
-
-echo "$as_me:$LINENO: checking for strlcat" >&5
-echo $ECHO_N "checking for strlcat... $ECHO_C" >&6
-if test "${kde_cv_func_strlcat+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
- ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-save_CXXFLAGS="$CXXFLAGS"
-kde_safe_LIBS="$LIBS"
-LIBS="$LIBS $X_EXTRA_LIBS"
-if test "$GXX" = "yes"; then
-CXXFLAGS="$CXXFLAGS -pedantic-errors"
-fi
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-
-#include <string.h>
-
-
-int
-main ()
-{
-
- char buf[20];
-  buf[0]='\0';
-  strlcat(buf, "KDE function test", sizeof(buf));
-
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  kde_cv_func_strlcat=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-kde_cv_func_strlcat=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-CXXFLAGS="$save_CXXFLAGS"
-LIBS="$kde_safe_LIBS"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-
-echo "$as_me:$LINENO: result: $kde_cv_func_strlcat" >&5
-echo "${ECHO_T}$kde_cv_func_strlcat" >&6
-
-echo "$as_me:$LINENO: checking if strlcat needs custom prototype" >&5
-echo $ECHO_N "checking if strlcat needs custom prototype... $ECHO_C" >&6
-if test "${kde_cv_proto_strlcat+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-if test "x$kde_cv_func_strlcat" = xyes; then
-  kde_cv_proto_strlcat=no
-else
-  case "strlcat" in
-	setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat)
-		kde_cv_proto_strlcat="yes - in libtdefakes"
-		;;
-	*)
-		kde_cv_proto_strlcat=unknown
-		;;
-  esac
-fi
-
-if test "x$kde_cv_proto_strlcat" = xunknown; then
-
-
-
- ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  kde_safe_libs=$LIBS
-  LIBS="$LIBS $X_EXTRA_LIBS"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-
-#include <string.h>
-
-
-extern "C" unsigned long strlcat(char*, const char*, unsigned long);
-
-int
-main ()
-{
-
- char buf[20];
-  buf[0]='\0';
-  strlcat(buf, "KDE function test", sizeof(buf));
-
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   kde_cv_func_strlcat=yes
-  kde_cv_proto_strlcat=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-kde_cv_proto_strlcat="strlcat unavailable"
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$kde_safe_libs
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-
-fi
-
-echo "$as_me:$LINENO: result: $kde_cv_proto_strlcat" >&5
-echo "${ECHO_T}$kde_cv_proto_strlcat" >&6
-
-if test "x$kde_cv_func_strlcat" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRLCAT 1
-_ACEOF
-
-
-fi
-if test "x$kde_cv_proto_strlcat" = xno; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRLCAT_PROTO 1
-_ACEOF
-
-fi
-
-
-
-
-
-
-
-echo "$as_me:$LINENO: checking for strlcpy" >&5
-echo $ECHO_N "checking for strlcpy... $ECHO_C" >&6
-if test "${kde_cv_func_strlcpy+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
- ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-save_CXXFLAGS="$CXXFLAGS"
-kde_safe_LIBS="$LIBS"
-LIBS="$LIBS $X_EXTRA_LIBS"
-if test "$GXX" = "yes"; then
-CXXFLAGS="$CXXFLAGS -pedantic-errors"
-fi
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-
-#include <string.h>
-
-
-int
-main ()
-{
-
- char buf[20];
-  strlcpy(buf, "KDE function test", sizeof(buf));
-
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  kde_cv_func_strlcpy=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-kde_cv_func_strlcpy=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-CXXFLAGS="$save_CXXFLAGS"
-LIBS="$kde_safe_LIBS"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-
-echo "$as_me:$LINENO: result: $kde_cv_func_strlcpy" >&5
-echo "${ECHO_T}$kde_cv_func_strlcpy" >&6
-
-echo "$as_me:$LINENO: checking if strlcpy needs custom prototype" >&5
-echo $ECHO_N "checking if strlcpy needs custom prototype... $ECHO_C" >&6
-if test "${kde_cv_proto_strlcpy+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-if test "x$kde_cv_func_strlcpy" = xyes; then
-  kde_cv_proto_strlcpy=no
-else
-  case "strlcpy" in
-	setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat)
-		kde_cv_proto_strlcpy="yes - in libtdefakes"
-		;;
-	*)
-		kde_cv_proto_strlcpy=unknown
-		;;
-  esac
-fi
-
-if test "x$kde_cv_proto_strlcpy" = xunknown; then
-
-
-
- ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  kde_safe_libs=$LIBS
-  LIBS="$LIBS $X_EXTRA_LIBS"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-
-#include <string.h>
-
-
-extern "C" unsigned long strlcpy(char*, const char*, unsigned long);
-
-int
-main ()
-{
-
- char buf[20];
-  strlcpy(buf, "KDE function test", sizeof(buf));
-
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   kde_cv_func_strlcpy=yes
-  kde_cv_proto_strlcpy=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-kde_cv_proto_strlcpy="strlcpy unavailable"
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$kde_safe_libs
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-
-fi
-
-echo "$as_me:$LINENO: result: $kde_cv_proto_strlcpy" >&5
-echo "${ECHO_T}$kde_cv_proto_strlcpy" >&6
-
-if test "x$kde_cv_func_strlcpy" = xyes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRLCPY 1
-_ACEOF
-
-
-fi
-if test "x$kde_cv_proto_strlcpy" = xno; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRLCPY_PROTO 1
-_ACEOF
-
-fi
-
-
-
-
-
-
-   ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-      echo "$as_me:$LINENO: checking for main in -lutil" >&5
-echo $ECHO_N "checking for main in -lutil... $ECHO_C" >&6
-if test "${ac_cv_lib_util_main+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lutil  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-
-int
-main ()
-{
-main ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_util_main=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_util_main=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_util_main" >&5
-echo "${ECHO_T}$ac_cv_lib_util_main" >&6
-if test $ac_cv_lib_util_main = yes; then
-  LIBUTIL="-lutil"
-fi
-
-   echo "$as_me:$LINENO: checking for main in -lcompat" >&5
-echo $ECHO_N "checking for main in -lcompat... $ECHO_C" >&6
-if test "${ac_cv_lib_compat_main+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcompat  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-
-int
-main ()
-{
-main ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_compat_main=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_compat_main=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_compat_main" >&5
-echo "${ECHO_T}$ac_cv_lib_compat_main" >&6
-if test $ac_cv_lib_compat_main = yes; then
-  LIBCOMPAT="-lcompat"
-fi
-
-   kde_have_crypt=
-   echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5
-echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6
-if test "${ac_cv_lib_crypt_crypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcrypt  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char crypt ();
-int
-main ()
-{
-crypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_crypt_crypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_crypt_crypt=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5
-echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6
-if test $ac_cv_lib_crypt_crypt = yes; then
-  LIBCRYPT="-lcrypt"; kde_have_crypt=yes
-else
-  echo "$as_me:$LINENO: checking for crypt in -lc" >&5
-echo $ECHO_N "checking for crypt in -lc... $ECHO_C" >&6
-if test "${ac_cv_lib_c_crypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char crypt ();
-int
-main ()
-{
-crypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_c_crypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_c_crypt=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_c_crypt" >&5
-echo "${ECHO_T}$ac_cv_lib_c_crypt" >&6
-if test $ac_cv_lib_c_crypt = yes; then
-  kde_have_crypt=yes
-else
-
-        { echo "$as_me:$LINENO: WARNING: you have no crypt in either libcrypt or libc.
-You should install libcrypt from another source or configure with PAM
-support" >&5
-echo "$as_me: WARNING: you have no crypt in either libcrypt or libc.
-You should install libcrypt from another source or configure with PAM
-support" >&2;}
-	kde_have_crypt=no
-
-fi
-
-fi
-
-
-   if test $kde_have_crypt = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_CRYPT 1
-_ACEOF
-
-   fi
-
-  echo "$as_me:$LINENO: checking for socklen_t" >&5
-echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6
-  if test "${ac_cv_socklen_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-     ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-
-int
-main ()
-{
-
-socklen_t a=0;
-getsockname(0,(struct sockaddr*)0, &a);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_socklen_t=socklen_t
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-
-int
-main ()
-{
-
-int a=0;
-getsockname(0,(struct sockaddr*)0, &a);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_socklen_t=int
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_socklen_t=size_t
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-    ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-
-  echo "$as_me:$LINENO: result: $ac_cv_socklen_t" >&5
-echo "${ECHO_T}$ac_cv_socklen_t" >&6
-  if test "$ac_cv_socklen_t" != "socklen_t"; then
-
-cat >>confdefs.h <<_ACEOF
-#define socklen_t $ac_cv_socklen_t
-_ACEOF
-
-  fi
-
-cat >>confdefs.h <<_ACEOF
-#define ksize_t socklen_t
-_ACEOF
-
-
-
-   ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-   echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5
-echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6
-if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldnet  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dnet_ntoa ();
-int
-main ()
-{
-dnet_ntoa ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dnet_dnet_ntoa=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dnet_dnet_ntoa=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
-echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6
-if test $ac_cv_lib_dnet_dnet_ntoa = yes; then
-  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
-fi
-
-   if test $ac_cv_lib_dnet_dnet_ntoa = no; then
-      echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5
-echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6
-if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldnet_stub  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dnet_ntoa ();
-int
-main ()
-{
-dnet_ntoa ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dnet_stub_dnet_ntoa=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dnet_stub_dnet_ntoa=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
-echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6
-if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then
-  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
-fi
-
-   fi
-   echo "$as_me:$LINENO: checking for inet_ntoa" >&5
-echo $ECHO_N "checking for inet_ntoa... $ECHO_C" >&6
-if test "${ac_cv_func_inet_ntoa+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define inet_ntoa to an innocuous variant, in case <limits.h> declares inet_ntoa.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define inet_ntoa innocuous_inet_ntoa
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char inet_ntoa (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef inet_ntoa
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char inet_ntoa ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_inet_ntoa) || defined (__stub___inet_ntoa)
-choke me
-#else
-char (*f) () = inet_ntoa;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != inet_ntoa;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_inet_ntoa=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_inet_ntoa=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_inet_ntoa" >&5
-echo "${ECHO_T}$ac_cv_func_inet_ntoa" >&6
-
-   if test $ac_cv_func_inet_ntoa = no; then
-     echo "$as_me:$LINENO: checking for inet_ntoa in -lnsl" >&5
-echo $ECHO_N "checking for inet_ntoa in -lnsl... $ECHO_C" >&6
-if test "${ac_cv_lib_nsl_inet_ntoa+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lnsl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char inet_ntoa ();
-int
-main ()
-{
-inet_ntoa ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_nsl_inet_ntoa=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_nsl_inet_ntoa=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_inet_ntoa" >&5
-echo "${ECHO_T}$ac_cv_lib_nsl_inet_ntoa" >&6
-if test $ac_cv_lib_nsl_inet_ntoa = yes; then
-  X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
-fi
-
-   fi
-   echo "$as_me:$LINENO: checking for connect" >&5
-echo $ECHO_N "checking for connect... $ECHO_C" >&6
-if test "${ac_cv_func_connect+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define connect to an innocuous variant, in case <limits.h> declares connect.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define connect innocuous_connect
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char connect (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef connect
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char connect ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_connect) || defined (__stub___connect)
-choke me
-#else
-char (*f) () = connect;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != connect;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_connect=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_connect=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5
-echo "${ECHO_T}$ac_cv_func_connect" >&6
-
-   if test $ac_cv_func_connect = no; then
-      echo "$as_me:$LINENO: checking for connect in -lsocket" >&5
-echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6
-if test "${ac_cv_lib_socket_connect+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char connect ();
-int
-main ()
-{
-connect ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_socket_connect=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_socket_connect=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5
-echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6
-if test $ac_cv_lib_socket_connect = yes; then
-  X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
-fi
-
-   fi
-
-   echo "$as_me:$LINENO: checking for remove" >&5
-echo $ECHO_N "checking for remove... $ECHO_C" >&6
-if test "${ac_cv_func_remove+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define remove to an innocuous variant, in case <limits.h> declares remove.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define remove innocuous_remove
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char remove (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef remove
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char remove ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_remove) || defined (__stub___remove)
-choke me
-#else
-char (*f) () = remove;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != remove;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_remove=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_remove=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5
-echo "${ECHO_T}$ac_cv_func_remove" >&6
-
-   if test $ac_cv_func_remove = no; then
-      echo "$as_me:$LINENO: checking for remove in -lposix" >&5
-echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6
-if test "${ac_cv_lib_posix_remove+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lposix  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char remove ();
-int
-main ()
-{
-remove ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_posix_remove=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_posix_remove=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5
-echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6
-if test $ac_cv_lib_posix_remove = yes; then
-  X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
-fi
-
-   fi
-
-   # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
-   echo "$as_me:$LINENO: checking for shmat" >&5
-echo $ECHO_N "checking for shmat... $ECHO_C" >&6
-if test "${ac_cv_func_shmat+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shmat to an innocuous variant, in case <limits.h> declares shmat.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shmat innocuous_shmat
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shmat (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shmat
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shmat ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shmat) || defined (__stub___shmat)
-choke me
-#else
-char (*f) () = shmat;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != shmat;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shmat=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_shmat=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5
-echo "${ECHO_T}$ac_cv_func_shmat" >&6
-if test $ac_cv_func_shmat = yes; then
-  :
-else
-  echo "$as_me:$LINENO: checking for shmat in -lipc" >&5
-echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6
-if test "${ac_cv_lib_ipc_shmat+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lipc  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shmat ();
-int
-main ()
-{
-shmat ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_ipc_shmat=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_ipc_shmat=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5
-echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6
-if test $ac_cv_lib_ipc_shmat = yes; then
-  X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
-fi
-
-fi
-
-
-   # darwin needs this to initialize the environment
-
-for ac_header in crt_externs.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-   echo "$as_me:$LINENO: checking for _NSGetEnviron" >&5
-echo $ECHO_N "checking for _NSGetEnviron... $ECHO_C" >&6
-if test "${ac_cv_func__NSGetEnviron+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define _NSGetEnviron to an innocuous variant, in case <limits.h> declares _NSGetEnviron.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define _NSGetEnviron innocuous__NSGetEnviron
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char _NSGetEnviron (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef _NSGetEnviron
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char _NSGetEnviron ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub__NSGetEnviron) || defined (__stub____NSGetEnviron)
-choke me
-#else
-char (*f) () = _NSGetEnviron;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != _NSGetEnviron;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func__NSGetEnviron=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func__NSGetEnviron=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func__NSGetEnviron" >&5
-echo "${ECHO_T}$ac_cv_func__NSGetEnviron" >&6
-if test $ac_cv_func__NSGetEnviron = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_NSGETENVIRON 1
-_ACEOF
-
-fi
-
-
-   # more headers that need to be explicitly included on darwin
-
-
-for ac_header in sys/types.h stdint.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-   # darwin requires a poll emulation library
-   echo "$as_me:$LINENO: checking for poll in -lpoll" >&5
-echo $ECHO_N "checking for poll in -lpoll... $ECHO_C" >&6
-if test "${ac_cv_lib_poll_poll+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpoll  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char poll ();
-int
-main ()
-{
-poll ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_poll_poll=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_poll_poll=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_poll_poll" >&5
-echo "${ECHO_T}$ac_cv_lib_poll_poll" >&6
-if test $ac_cv_lib_poll_poll = yes; then
-  LIB_POLL="-lpoll"
-fi
-
-
-   # CoreAudio framework
-   if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then
-  echo "$as_me:$LINENO: checking for CoreAudio/CoreAudio.h" >&5
-echo $ECHO_N "checking for CoreAudio/CoreAudio.h... $ECHO_C" >&6
-if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_CoreAudio_CoreAudio_h" >&5
-echo "${ECHO_T}$ac_cv_header_CoreAudio_CoreAudio_h" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking CoreAudio/CoreAudio.h usability" >&5
-echo $ECHO_N "checking CoreAudio/CoreAudio.h usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <CoreAudio/CoreAudio.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking CoreAudio/CoreAudio.h presence" >&5
-echo $ECHO_N "checking CoreAudio/CoreAudio.h presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <CoreAudio/CoreAudio.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: CoreAudio/CoreAudio.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: CoreAudio/CoreAudio.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: present but cannot be compiled" >&5
-echo "$as_me: WARNING: CoreAudio/CoreAudio.h: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: CoreAudio/CoreAudio.h:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: CoreAudio/CoreAudio.h: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: CoreAudio/CoreAudio.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: CoreAudio/CoreAudio.h: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: CoreAudio/CoreAudio.h: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for CoreAudio/CoreAudio.h" >&5
-echo $ECHO_N "checking for CoreAudio/CoreAudio.h... $ECHO_C" >&6
-if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_header_CoreAudio_CoreAudio_h=$ac_header_preproc
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_CoreAudio_CoreAudio_h" >&5
-echo "${ECHO_T}$ac_cv_header_CoreAudio_CoreAudio_h" >&6
-
-fi
-if test $ac_cv_header_CoreAudio_CoreAudio_h = yes; then
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_COREAUDIO 1
-_ACEOF
-
-     FRAMEWORK_COREAUDIO="-framework CoreAudio"
-
-fi
-
-
-
-
-  echo "$as_me:$LINENO: checking if res_init needs -lresolv" >&5
-echo $ECHO_N "checking if res_init needs -lresolv... $ECHO_C" >&6
-  kde_libs_safe="$LIBS"
-  LIBS="$LIBS $X_EXTRA_LIBS -lresolv"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-
-int
-main ()
-{
-
-      res_init();
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-      LIBRESOLV="-lresolv"
-      echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_RES_INIT 1
-_ACEOF
-
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  LIBS=$kde_libs_safe
-
-
-  echo "$as_me:$LINENO: checking if res_init is available" >&5
-echo $ECHO_N "checking if res_init is available... $ECHO_C" >&6
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-
-int
-main ()
-{
-
-      res_init();
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-      echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_RES_INIT 1
-_ACEOF
-
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-
-   LIBSOCKET="$X_EXTRA_LIBS"
-
-
-   echo "$as_me:$LINENO: checking for killpg in -lucb" >&5
-echo $ECHO_N "checking for killpg in -lucb... $ECHO_C" >&6
-if test "${ac_cv_lib_ucb_killpg+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lucb  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char killpg ();
-int
-main ()
-{
-killpg ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_ucb_killpg=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_ucb_killpg=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_ucb_killpg" >&5
-echo "${ECHO_T}$ac_cv_lib_ucb_killpg" >&6
-if test $ac_cv_lib_ucb_killpg = yes; then
-  LIBUCB="-lucb"
-fi
-
-
-   case $host in     *-*-lynxos* )
-        echo "$as_me:$LINENO: checking LynxOS header file wrappers" >&5
-echo $ECHO_N "checking LynxOS header file wrappers... $ECHO_C" >&6
-        CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"
-        echo "$as_me:$LINENO: result: disabled" >&5
-echo "${ECHO_T}disabled" >&6
-        echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5
-echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6
-if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lbsd  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char gethostbyname ();
-int
-main ()
-{
-gethostbyname ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_bsd_gethostbyname=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_bsd_gethostbyname=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5
-echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6
-if test $ac_cv_lib_bsd_gethostbyname = yes; then
-  LIBSOCKET="-lbsd"
-fi
-          ;;
-    esac
-
-     echo "$as_me:$LINENO: checking for int" >&5
-echo $ECHO_N "checking for int... $ECHO_C" >&6
-if test "${ac_cv_type_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((int *) 0)
-  return 0;
-if (sizeof (int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_int=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
-echo "${ECHO_T}$ac_cv_type_int" >&6
-
-echo "$as_me:$LINENO: checking size of int" >&5
-echo $ECHO_N "checking size of int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (int)); }
-unsigned long ulongval () { return (long) (sizeof (int)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (int))))
-	exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (int))))
-	exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_int" >&6
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_INT $ac_cv_sizeof_int
-_ACEOF
-
-  echo "$as_me:$LINENO: checking for long" >&5
-echo $ECHO_N "checking for long... $ECHO_C" >&6
-if test "${ac_cv_type_long+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((long *) 0)
-  return 0;
-if (sizeof (long))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_long=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_long=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5
-echo "${ECHO_T}$ac_cv_type_long" >&6
-
-echo "$as_me:$LINENO: checking size of long" >&5
-echo $ECHO_N "checking size of long... $ECHO_C" >&6
-if test "${ac_cv_sizeof_long+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_long" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_long=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (long)); }
-unsigned long ulongval () { return (long) (sizeof (long)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (long))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (long))))
-	exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (long))))
-	exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_long=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_long=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long" >&6
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_LONG $ac_cv_sizeof_long
-_ACEOF
-
-  echo "$as_me:$LINENO: checking for char *" >&5
-echo $ECHO_N "checking for char *... $ECHO_C" >&6
-if test "${ac_cv_type_char_p+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((char * *) 0)
-  return 0;
-if (sizeof (char *))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_char_p=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_char_p=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_char_p" >&5
-echo "${ECHO_T}$ac_cv_type_char_p" >&6
-
-echo "$as_me:$LINENO: checking size of char *" >&5
-echo $ECHO_N "checking size of char *... $ECHO_C" >&6
-if test "${ac_cv_sizeof_char_p+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_char_p" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (char *))) >= 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (char *))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (char *))) < 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (char *))) >= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (char *))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_char_p=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (char *), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (char *), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (char *)); }
-unsigned long ulongval () { return (long) (sizeof (char *)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (char *))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (char *))))
-	exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (char *))))
-	exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_char_p=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (char *), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (char *), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_char_p=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_char_p" >&5
-echo "${ECHO_T}$ac_cv_sizeof_char_p" >&6
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_CHAR_P $ac_cv_sizeof_char_p
-_ACEOF
-
-
-
-echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-
-LIBDL="-ldl"
-ac_cv_have_dlfcn=yes
-
-fi
-
-
-echo "$as_me:$LINENO: checking for shl_unload in -ldld" >&5
-echo $ECHO_N "checking for shl_unload in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_unload+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_unload ();
-int
-main ()
-{
-shl_unload ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_unload=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_shl_unload=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_unload" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_unload" >&6
-if test $ac_cv_lib_dld_shl_unload = yes; then
-
-LIBDL="-ldld"
-ac_cv_have_shload=yes
-
-fi
-
-
-
-
-
-
-
-  echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6
-if test "${ac_cv_type_size_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((size_t *) 0)
-  return 0;
-if (sizeof (size_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_size_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_size_t=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-echo "${ECHO_T}$ac_cv_type_size_t" >&6
-
-echo "$as_me:$LINENO: checking size of size_t" >&5
-echo $ECHO_N "checking size of size_t... $ECHO_C" >&6
-if test "${ac_cv_sizeof_size_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_size_t" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (size_t))) >= 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (size_t))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (size_t))) < 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (size_t))) >= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (size_t))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_size_t=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (size_t), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (size_t), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (size_t)); }
-unsigned long ulongval () { return (long) (sizeof (size_t)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (size_t))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (size_t))))
-	exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (size_t))))
-	exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_size_t=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (size_t), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (size_t), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_size_t=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_size_t" >&5
-echo "${ECHO_T}$ac_cv_sizeof_size_t" >&6
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t
-_ACEOF
-
-
-  echo "$as_me:$LINENO: checking for unsigned long" >&5
-echo $ECHO_N "checking for unsigned long... $ECHO_C" >&6
-if test "${ac_cv_type_unsigned_long+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((unsigned long *) 0)
-  return 0;
-if (sizeof (unsigned long))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_unsigned_long=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_unsigned_long=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long" >&5
-echo "${ECHO_T}$ac_cv_type_unsigned_long" >&6
-
-echo "$as_me:$LINENO: checking size of unsigned long" >&5
-echo $ECHO_N "checking size of unsigned long... $ECHO_C" >&6
-if test "${ac_cv_sizeof_unsigned_long+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_unsigned_long" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-		    if test $ac_lo -le $ac_mid; then
-		      ac_lo= ac_hi=
-		      break
-		    fi
-		    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) < 0)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-		       if test $ac_mid -le $ac_hi; then
-			 ac_lo= ac_hi=
-			 break
-		       fi
-		       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_unsigned_long=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned long), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (unsigned long)); }
-unsigned long ulongval () { return (long) (sizeof (unsigned long)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (unsigned long))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (unsigned long))))
-	exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (unsigned long))))
-	exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_unsigned_long=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (unsigned long), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_unsigned_long=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_long" >&5
-echo "${ECHO_T}$ac_cv_sizeof_unsigned_long" >&6
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
-_ACEOF
-
-
-
-  echo "$as_me:$LINENO: checking sizeof size_t == sizeof unsigned long" >&5
-echo $ECHO_N "checking sizeof size_t == sizeof unsigned long... $ECHO_C" >&6
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-    #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG
-       choke me
-    #endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-      echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-      { { echo "$as_me:$LINENO: error:
-       Apparently on your system our assumption sizeof size_t == sizeof unsigned long
-       does not apply. Please mail kde-devel@kde.org with a description of your system!
-      " >&5
-echo "$as_me: error:
-       Apparently on your system our assumption sizeof size_t == sizeof unsigned long
-       does not apply. Please mail kde-devel@kde.org with a description of your system!
-      " >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
-
-
-
-
-
-for ac_func in vsnprintf snprintf
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-
-
-
-# Check whether --enable-embedded or --disable-embedded was given.
-if test "${enable_embedded+set}" = set; then
-  enableval="$enable_embedded"
-  kde_use_qt_emb=$enableval
-else
-  kde_use_qt_emb=no
-
-fi;
-
-# Check whether --enable-qtopia or --disable-qtopia was given.
-if test "${enable_qtopia+set}" = set; then
-  enableval="$enable_qtopia"
-  kde_use_qt_emb_palm=$enableval
-else
-  kde_use_qt_emb_palm=no
-
-fi;
-
-if test "$kde_use_qt_emb" = "no"; then
-
-echo "$as_me:$LINENO: checking for X" >&5
-echo $ECHO_N "checking for X... $ECHO_C" >&6
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-if test "${kde_cv_have_x+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # One or both of the vars are not set, and there is no cached value.
-if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
-   kde_x_includes=NO
-else
-   kde_x_includes=$x_includes
-fi
-if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
-   kde_x_libraries=NO
-else
-   kde_x_libraries=$x_libraries
-fi
-
-# below we use the standard autoconf calls
-ac_x_libraries=$kde_x_libraries
-ac_x_includes=$kde_x_includes
-
-
-
-
-if test "$ac_x_includes" = NO; then
-  # Guess where to find include files, by looking for this one X11 .h file.
-  test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
-  # First, try using that file with no special directory specified.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$x_direct_test_include>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # We can compile using X headers with no special include directory.
-ac_x_includes=
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-  for ac_dir in               \
-    /usr/X11/include          \
-    /usr/X11R6/include        \
-    /usr/X11R5/include        \
-    /usr/X11R4/include        \
-                              \
-    /usr/include/X11          \
-    /usr/include/X11R6        \
-    /usr/include/X11R5        \
-    /usr/include/X11R4        \
-                              \
-    /usr/local/X11/include    \
-    /usr/local/X11R6/include  \
-    /usr/local/X11R5/include  \
-    /usr/local/X11R4/include  \
-                              \
-    /usr/local/include/X11    \
-    /usr/local/include/X11R6  \
-    /usr/local/include/X11R5  \
-    /usr/local/include/X11R4  \
-                              \
-    /usr/X386/include         \
-    /usr/x386/include         \
-    /usr/XFree86/include/X11  \
-                              \
-    /usr/include              \
-    /usr/local/include        \
-    /usr/unsupported/include  \
-    /usr/athena/include       \
-    /usr/local/x11r5/include  \
-    /usr/lpp/Xamples/include  \
-                              \
-    /usr/openwin/include      \
-    /usr/openwin/share/include \
-    ; \
-  do
-    if test -r "$ac_dir/$x_direct_test_include"; then
-      ac_x_includes=$ac_dir
-      break
-    fi
-  done
-fi
-rm -f conftest.err conftest.$ac_ext
-fi # $ac_x_includes = NO
-
-if test "$ac_x_libraries" = NO; then
-  # Check for the libraries.
-
-  test -z "$x_direct_test_library" && x_direct_test_library=Xt
-  test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
-  # See if we find them without any special options.
-  # Don't add to $LIBS permanently.
-  ac_save_LIBS="$LIBS"
-  LIBS="-l$x_direct_test_library $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-${x_direct_test_function}()
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \
-    /usr/X11/lib${tdelibsuff}           \
-    /usr/X11R6/lib${tdelibsuff}         \
-    /usr/X11R5/lib${tdelibsuff}         \
-    /usr/X11R4/lib${tdelibsuff}         \
-                                        \
-    /usr/lib${tdelibsuff}/X11           \
-    /usr/lib${tdelibsuff}/X11R6         \
-    /usr/lib${tdelibsuff}/X11R5         \
-    /usr/lib${tdelibsuff}/X11R4         \
-                                        \
-    /usr/local/X11/lib${tdelibsuff}     \
-    /usr/local/X11R6/lib${tdelibsuff}   \
-    /usr/local/X11R5/lib${tdelibsuff}   \
-    /usr/local/X11R4/lib${tdelibsuff}   \
-                                        \
-    /usr/local/lib${tdelibsuff}/X11     \
-    /usr/local/lib${tdelibsuff}/X11R6   \
-    /usr/local/lib${tdelibsuff}/X11R5   \
-    /usr/local/lib${tdelibsuff}/X11R4   \
-                                        \
-    /usr/X386/lib${tdelibsuff}          \
-    /usr/x386/lib${tdelibsuff}          \
-    /usr/XFree86/lib${tdelibsuff}/X11   \
-                                        \
-    /usr/lib${tdelibsuff}               \
-    /usr/local/lib${tdelibsuff}         \
-    /usr/unsupported/lib${tdelibsuff}   \
-    /usr/athena/lib${tdelibsuff}        \
-    /usr/local/x11r5/lib${tdelibsuff}   \
-    /usr/lpp/Xamples/lib${tdelibsuff}   \
-    /lib/usr/lib${tdelibsuff}/X11       \
-                                        \
-    /usr/openwin/lib${tdelibsuff}       \
-    /usr/openwin/share/lib${tdelibsuff} \
-    ; \
-do
-  for ac_extension in a so sl; do
-    if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
-      ac_x_libraries=$ac_dir
-      break 2
-    fi
-  done
-done
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi # $ac_x_libraries = NO
-
-case "$host" in
-mips-sgi-irix6*)
-  ;;
-*-*-solaris*)
-  ;;
-*)
-  rm -fr conftest.dir
-if mkdir conftest.dir; then
-  cd conftest.dir
-  # Make sure to not put "make" in the Imakefile rules, since we grep it out.
-  cat >Imakefile <<'_ACEOF'
-acfindx:
-	@echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
-_ACEOF
-  if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
-    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-    eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
-    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
-    for ac_extension in a so sl; do
-      if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
-	 test -f $ac_im_libdir/libX11.$ac_extension; then
-	ac_im_usrlibdir=$ac_im_libdir; break
-      fi
-    done
-    # Screen out bogus values from the imake configuration.  They are
-    # bogus both because they are the default anyway, and because
-    # using them would break gcc on systems where it needs fixed includes.
-    case $ac_im_incroot in
-	/usr/include) ;;
-	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
-    esac
-    case $ac_im_usrlibdir in
-	/usr/lib | /lib) ;;
-	*) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
-    esac
-  fi
-  cd ..
-  rm -fr conftest.dir
-fi
-
-  if test -z "$ac_x_includes"; then
-    ac_x_includes="."
-  fi
-  if test -z "$ac_x_libraries"; then
-    ac_x_libraries="/usr/lib${tdelibsuff}"
-  fi
-esac
-#from now on we use our own again
-
-# when the user already gave --x-includes, we ignore
-# what the standard autoconf macros told us.
-if test "$kde_x_includes" = NO; then
-  kde_x_includes=$ac_x_includes
-fi
-
-# for --x-libraries too
-if test "$kde_x_libraries" = NO; then
-  kde_x_libraries=$ac_x_libraries
-fi
-
-if test "$kde_x_includes" = NO; then
-  { { echo "$as_me:$LINENO: error: Can't find X includes. Please check your installation and add the correct paths!" >&5
-echo "$as_me: error: Can't find X includes. Please check your installation and add the correct paths!" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-if test "$kde_x_libraries" = NO; then
-  { { echo "$as_me:$LINENO: error: Can't find X libraries. Please check your installation and add the correct paths!" >&5
-echo "$as_me: error: Can't find X libraries. Please check your installation and add the correct paths!" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-# Record where we found X for the cache.
-kde_cv_have_x="have_x=yes \
-         kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
-
-fi
-
-eval "$kde_cv_have_x"
-
-if test "$have_x" != yes; then
-  echo "$as_me:$LINENO: result: $have_x" >&5
-echo "${ECHO_T}$have_x" >&6
-  no_x=yes
-else
-  echo "$as_me:$LINENO: result: libraries $kde_x_libraries, headers $kde_x_includes" >&5
-echo "${ECHO_T}libraries $kde_x_libraries, headers $kde_x_includes" >&6
-fi
-
-if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
-  X_INCLUDES=""
-  x_includes=".";  else
-  x_includes=$kde_x_includes
-  X_INCLUDES="-I$x_includes"
-fi
-
-if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
-  X_LDFLAGS=""
-  x_libraries="/usr/lib";  else
-  x_libraries=$kde_x_libraries
-  X_LDFLAGS="-L$x_libraries"
-fi
-all_includes="$X_INCLUDES"
-all_libraries="$X_LDFLAGS"
-
-
-
-
-
-
-# Check for libraries that X11R6 Xt/Xaw programs need.
-ac_save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
-# check for ICE first), but we must link in the order -lSM -lICE or
-# we get undefined symbols.  So assume we have SM if we have ICE.
-# These have to be linked with before -lX11, unlike the other
-# libraries we check for below, so use a different variable.
-#  --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
-echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5
-echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6
-if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lICE $X_EXTRA_LIBS $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char IceConnectionNumber ();
-int
-main ()
-{
-IceConnectionNumber ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_ICE_IceConnectionNumber=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_ICE_IceConnectionNumber=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
-echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6
-if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then
-  LIBSM="-lSM -lICE"
-fi
-
-
-LDFLAGS="$ac_save_LDFLAGS"
-
-
-
-LIB_X11='-lX11 $(LIBSOCKET)'
-
-
-echo "$as_me:$LINENO: checking for libXext" >&5
-echo $ECHO_N "checking for libXext... $ECHO_C" >&6
-if test "${kde_cv_have_libXext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-kde_ldflags_safe="$LDFLAGS"
-kde_libs_safe="$LIBS"
-
-LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
-LIBS="-lXext -lX11 $LIBSOCKET"
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdio.h>
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-
-int
-main ()
-{
-
-printf("hello Xext\n");
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  kde_cv_have_libXext=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-kde_cv_have_libXext=no
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-
-LDFLAGS=$kde_ldflags_safe
-LIBS=$kde_libs_safe
-
-fi
-
-
-echo "$as_me:$LINENO: result: $kde_cv_have_libXext" >&5
-echo "${ECHO_T}$kde_cv_have_libXext" >&6
-
-if test "$kde_cv_have_libXext" = "no"; then
-  { { echo "$as_me:$LINENO: error: We need a working libXext to proceed. Since configure
-can't find it itself, we stop here assuming that make wouldn't find
-them either." >&5
-echo "$as_me: error: We need a working libXext to proceed. Since configure
-can't find it itself, we stop here assuming that make wouldn't find
-them either." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-LIB_XEXT="-lXext"
-QTE_NORTTI=""
-
-else
-    CPPFLAGS=-DQWS
-  CXXFLAGS="$CXXFLAGS -fno-rtti"
-  QTE_NORTTI="-fno-rtti -DQWS"
-  X_PRE_LIBS=""
-  LIB_X11=""
-  LIB_XEXT=""
-  LIBSM=""
-  X_INCLUDES=""
-  X_LDFLAGS=""
-  x_includes=""
-  x_libraries=""
-
-
-
-
-
-
-
-fi
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5
-echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6
-if test "${ac_cv_lib_pthread_pthread_create+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char pthread_create ();
-int
-main ()
-{
-pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_pthread_pthread_create=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_pthread_pthread_create=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_create" >&5
-echo "${ECHO_T}$ac_cv_lib_pthread_pthread_create" >&6
-if test $ac_cv_lib_pthread_pthread_create = yes; then
-  LIBPTHREAD="-lpthread"
-fi
-
-
-
-
-    # Check whether --enable-kernel-threads or --disable-kernel-threads was given.
-if test "${enable_kernel_threads+set}" = set; then
-  enableval="$enable_kernel_threads"
-  kde_use_kernthreads=$enableval
-else
-  kde_use_kernthreads=no
-fi;
-
-    if test "$kde_use_kernthreads" = "yes"; then
-      ac_save_CXXFLAGS="$CXXFLAGS"
-      ac_save_CFLAGS="$CFLAGS"
-      CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
-      CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
-
-for ac_header in pthread/linuxthreads/pthread.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-      CXXFLAGS="$ac_save_CXXFLAGS"
-      CFLAGS="$ac_save_CFLAGS"
-      if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
-        kde_use_kernthreads=no
-      else
-                echo "$as_me:$LINENO: checking for pthread_join in -llthread" >&5
-echo $ECHO_N "checking for pthread_join in -llthread... $ECHO_C" >&6
-if test "${ac_cv_lib_lthread_pthread_join+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-llthread  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char pthread_join ();
-int
-main ()
-{
-pthread_join ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_lthread_pthread_join=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_lthread_pthread_join=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_lthread_pthread_join" >&5
-echo "${ECHO_T}$ac_cv_lib_lthread_pthread_join" >&6
-if test $ac_cv_lib_lthread_pthread_join = yes; then
-  LIBPTHREAD="-llthread -llgcc_r"
-fi
-         if test "x$LIBPTHREAD" = "x"; then
-          kde_use_kernthreads=no
-        else
-          USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
-        fi
-      fi
-    else
-      USE_THREADS=""
-      if test -z "$LIBPTHREAD"; then
-
-echo "$as_me:$LINENO: checking whether $CXX supports -pthread" >&5
-echo $ECHO_N "checking whether $CXX supports -pthread... $ECHO_C" >&6
-kde_cache=`echo pthread | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -pthread"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- USE_THREADS="-pthread"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-      fi
-    fi
-
-
-
-    case $host_os in
- 	solaris*)
-
-echo "$as_me:$LINENO: checking whether $CXX supports -mt" >&5
-echo $ECHO_N "checking whether $CXX supports -mt... $ECHO_C" >&6
-kde_cache=`echo mt | sed 'y% .=/+-,%____p__%'`
-if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
-   ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-  save_CXXFLAGS="$CXXFLAGS"
-  CXXFLAGS="$CXXFLAGS -mt"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_prog_cxx_$kde_cache=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  CXXFLAGS="$save_CXXFLAGS"
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- :
- USE_THREADS="-mt"
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- :
-
-fi
-
-                CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4"
-    		;;
-        freebsd*)
-                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
-                ;;
-        aix*)
-                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
-                LIBPTHREAD="$LIBPTHREAD -lc_r"
-                ;;
-        linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
-                if test "$CXX" = "KCC"; then
-                  CXXFLAGS="$CXXFLAGS --thread_safe"
-		  NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe"
-                fi
-                ;;
-	*)
-		;;
-    esac
-
-
-
-
-echo "$as_me:$LINENO: checking for extra includes" >&5
-echo $ECHO_N "checking for extra includes... $ECHO_C" >&6
-
-# Check whether --with-extra-includes or --without-extra-includes was given.
-if test "${with_extra_includes+set}" = set; then
-  withval="$with_extra_includes"
-  kde_use_extra_includes="$withval"
-else
-  kde_use_extra_includes=NONE
-
-fi;
-kde_extra_includes=
-if test -n "$kde_use_extra_includes" && \
-   test "$kde_use_extra_includes" != "NONE"; then
-
-   ac_save_ifs=$IFS
-   IFS=':'
-   for dir in $kde_use_extra_includes; do
-     kde_extra_includes="$kde_extra_includes $dir"
-     USER_INCLUDES="$USER_INCLUDES -I$dir"
-   done
-   IFS=$ac_save_ifs
-   kde_use_extra_includes="added"
-else
-   kde_use_extra_includes="no"
-fi
-
-
-echo "$as_me:$LINENO: result: $kde_use_extra_includes" >&5
-echo "${ECHO_T}$kde_use_extra_includes" >&6
-
-kde_extra_libs=
-echo "$as_me:$LINENO: checking for extra libs" >&5
-echo $ECHO_N "checking for extra libs... $ECHO_C" >&6
-
-# Check whether --with-extra-libs or --without-extra-libs was given.
-if test "${with_extra_libs+set}" = set; then
-  withval="$with_extra_libs"
-  kde_use_extra_libs=$withval
-else
-  kde_use_extra_libs=NONE
-
-fi;
-if test -n "$kde_use_extra_libs" && \
-   test "$kde_use_extra_libs" != "NONE"; then
-
-   ac_save_ifs=$IFS
-   IFS=':'
-   for dir in $kde_use_extra_libs; do
-     kde_extra_libs="$kde_extra_libs $dir"
-     KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
-     USER_LDFLAGS="$USER_LDFLAGS -L$dir"
-   done
-   IFS=$ac_save_ifs
-   kde_use_extra_libs="added"
-else
-   kde_use_extra_libs="no"
-fi
-
-
-
-echo "$as_me:$LINENO: result: $kde_use_extra_libs" >&5
-echo "${ECHO_T}$kde_use_extra_libs" >&6
-
-
-
-
-echo "$as_me:$LINENO: checking for libz" >&5
-echo $ECHO_N "checking for libz... $ECHO_C" >&6
-if test "${ac_cv_lib_z+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-kde_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include<zlib.h>
-
-int
-main ()
-{
-
-  char buf[42];
-  gzFile f = (gzFile) 0;
-  /* this would segfault.. but we only link, don't run */
-  (void) gzgets(f, buf, sizeof(buf));
-
-  return (zlibVersion() == ZLIB_VERSION);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "ac_cv_lib_z='-lz'"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "ac_cv_lib_z=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-
-fi
-if test ! "$ac_cv_lib_z" = no; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBZ 1
-_ACEOF
-
-  LIBZ="$ac_cv_lib_z"
-  echo "$as_me:$LINENO: result: $ac_cv_lib_z" >&5
-echo "${ECHO_T}$ac_cv_lib_z" >&6
-else
-  { { echo "$as_me:$LINENO: error: not found.
-          Possibly configure picks up an outdated version
-          installed by XFree86. Remove it from your system.
-
-          Check your installation and look into config.log" >&5
-echo "$as_me: error: not found.
-          Possibly configure picks up an outdated version
-          installed by XFree86. Remove it from your system.
-
-          Check your installation and look into config.log" >&2;}
-   { (exit 1); exit 1; }; }
-  LIBZ=""
-fi
-
-
-
-
-
-echo "$as_me:$LINENO: checking for libpng" >&5
-echo $ECHO_N "checking for libpng... $ECHO_C" >&6
-if test "${ac_cv_lib_png+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-kde_save_LIBS="$LIBS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
-else
-LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm"
-fi
-kde_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-    #include<png.h>
-
-int
-main ()
-{
-
-    png_structp png_ptr = png_create_read_struct(  /* image ptr */
-		PNG_LIBPNG_VER_STRING, 0, 0, 0 );
-    return( png_ptr != 0 );
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "ac_cv_lib_png='-lpng $LIBZ -lm'"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "ac_cv_lib_png=no"
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS="$kde_save_LIBS"
-CFLAGS="$kde_save_CFLAGS"
-
-fi
-if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPNG 1
-_ACEOF
-
-  LIBPNG="$ac_cv_lib_png"
-
-  echo "$as_me:$LINENO: result: $ac_cv_lib_png" >&5
-echo "${ECHO_T}$ac_cv_lib_png" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-  LIBPNG=""
-
-fi
-
-
-
-echo "$as_me:$LINENO: checking for libjpeg6b" >&5
-echo $ECHO_N "checking for libjpeg6b... $ECHO_C" >&6
-if test "${ac_cv_lib_jpeg_6b+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -ljpeg6b -lm"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Override any gcc2 internal prototype to avoid an error.  */
-struct jpeg_decompress_struct;
-typedef struct jpeg_decompress_struct * j_decompress_ptr;
-typedef int size_t;
-#ifdef __cplusplus
-extern "C" {
-#endif
-    void jpeg_CreateDecompress(j_decompress_ptr cinfo,
-                                    int version, size_t structsize);
-#ifdef __cplusplus
-}
-#endif
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-
-int
-main ()
-{
-jpeg_CreateDecompress(0L, 0, 0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "ac_cv_lib_jpeg_6b=-ljpeg6b"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "ac_cv_lib_jpeg_6b=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS="$ac_save_LIBS"
-CFLAGS="$ac_save_CFLAGS"
-
-fi
-
-
-if eval "test ! \"`echo $ac_cv_lib_jpeg_6b`\" = no"; then
-  LIBJPEG="$ac_cv_lib_jpeg_6b"
-  echo "$as_me:$LINENO: result: $ac_cv_lib_jpeg_6b" >&5
-echo "${ECHO_T}$ac_cv_lib_jpeg_6b" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-
-echo "$as_me:$LINENO: checking for libjpeg" >&5
-echo $ECHO_N "checking for libjpeg... $ECHO_C" >&6
-if test "${ac_cv_lib_jpeg_normal+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS -ljpeg -lm"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Override any gcc2 internal prototype to avoid an error.  */
-struct jpeg_decompress_struct;
-typedef struct jpeg_decompress_struct * j_decompress_ptr;
-typedef int size_t;
-#ifdef __cplusplus
-extern "C" {
-#endif
-    void jpeg_CreateDecompress(j_decompress_ptr cinfo,
-                                    int version, size_t structsize);
-#ifdef __cplusplus
-}
-#endif
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-
-int
-main ()
-{
-jpeg_CreateDecompress(0L, 0, 0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "ac_cv_lib_jpeg_normal=-ljpeg"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "ac_cv_lib_jpeg_normal=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS="$ac_save_LIBS"
-CFLAGS="$ac_save_CFLAGS"
-
-fi
-
-
-if eval "test ! \"`echo $ac_cv_lib_jpeg_normal`\" = no"; then
-  LIBJPEG="$ac_cv_lib_jpeg_normal"
-  echo "$as_me:$LINENO: result: $ac_cv_lib_jpeg_normal" >&5
-echo "${ECHO_T}$ac_cv_lib_jpeg_normal" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-
-       LIBJPEG=
-
-
-fi
-
-
-
-fi
-
-
-
-jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes"
-
-jpeg_incdir=NO
-for i in $jpeg_incdirs;
-do
-  for j in jpeglib.h;
-  do
-    echo "configure: 24202: $i/$j" >&5
-    if test -r "$i/$j"; then
-      echo "taking that" >&5
-      jpeg_incdir=$i
-      break 2
-    fi
-  done
-done
-
-test "x$jpeg_incdir" = xNO && jpeg_incdir=
-
-if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBJPEG 1
-_ACEOF
-
-else
-  if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
-    { echo "$as_me:$LINENO: WARNING:
-There is an installation error in jpeg support. You seem to have only one
-of either the headers _or_ the libraries installed. You may need to either
-provide correct --with-extra-... options, or the development package of
-libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
-Disabling JPEG support.
-" >&5
-echo "$as_me: WARNING:
-There is an installation error in jpeg support. You seem to have only one
-of either the headers _or_ the libraries installed. You may need to either
-provide correct --with-extra-... options, or the development package of
-libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
-Disabling JPEG support.
-" >&2;}
-  else
-    { echo "$as_me:$LINENO: WARNING: libjpeg not found. disable JPEG support." >&5
-echo "$as_me: WARNING: libjpeg not found. disable JPEG support." >&2;}
-  fi
-  jpeg_incdir=
-  LIBJPEG=
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --enable-mt or --disable-mt was given.
-if test "${enable_mt+set}" = set; then
-  enableval="$enable_mt"
-  kde_use_qt_mt=$enableval
-else
-
-    if test $kde_qtver = 3; then
-      kde_use_qt_mt=yes
-    else
-      kde_use_qt_mt=no
-    fi
-
-
-fi;
-
-USING_QT_MT=""
-
-
-KDE_MT_LDFLAGS=
-KDE_MT_LIBS=
-if test "x$kde_use_qt_mt" = "xyes"; then
-
-
-
-    if test -z "$LIBPTHREAD"; then
-    if test -z "$USE_THREADS"; then
-      kde_check_threading_default=no
-    else
-      kde_check_threading_default=yes
-    fi
-  else
-    kde_check_threading_default=yes
-  fi
-  # Check whether --enable-threading or --disable-threading was given.
-if test "${enable_threading+set}" = set; then
-  enableval="$enable_threading"
-  kde_use_threading=$enableval
-else
-  kde_use_threading=$kde_check_threading_default
-fi;
-  if test "x$kde_use_threading" = "xyes"; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LIBPTHREAD 1
-_ACEOF
-
-  fi
-
-  if test "x$kde_use_threading" = "xyes"; then
-    CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS"
-    KDE_MT_LDFLAGS="$USE_THREADS"
-    KDE_MT_LIBS="$LIBPTHREAD"
-  else
-    kde_use_qt_mt=no
-  fi
-fi
-
-
-
-kde_qt_was_given=yes
-
-if test -z "$LIBQT_GLOB"; then
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    LIBQT_GLOB="libqte.*"
-  else
-    LIBQT_GLOB="libqt.*"
-  fi
-fi
-
-if test -z "$LIBQT"; then
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    qtlib="qte"
-  else
-    qtlib="qt"
-  fi
-
-  kde_int_qt="-l$qtlib"
-else
-  kde_int_qt="$LIBQT"
-  kde_lib_qt_set=yes
-fi
-
-if test -z "$LIBQPE"; then
-  if test "x$kde_use_qt_emb" = "xyes"; then
-    if test "x$kde_use_qt_emb_palm" = "xyes"; then
-      LIB_QPE="-lqpe"
-    else
-      LIB_QPE=""
-    fi
-  else
-    LIB_QPE=""
-  fi
-fi
-
-
-if test "x$kde_use_qt_mt" = "xyes"; then
-  if test -z "$LIBQT"; then
-    LIBQT="-l$qtlib-mt"
-    kde_int_qt="-l$qtlib-mt"
-  else
-    LIBQT="$qtlib-mt"
-    kde_int_qt="$qtlib-mt"
-  fi
-  LIBQT_GLOB="lib$qtlib-mt.*"
-  USING_QT_MT="using -mt"
-else
-  LIBQT="-l$qtlib"
-fi
-
-if test $kde_qtver != 1; then
-
-
-
-  LIBQT="$LIBQT $LIBPNG $LIBJPEG"
-fi
-
-if test $kde_qtver = 3; then
-
-  LIBQT="$LIBQT $LIBDL"
-fi
-
-echo "$as_me:$LINENO: checking for Qt" >&5
-echo $ECHO_N "checking for Qt... $ECHO_C" >&6
-
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
-fi
-ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
-qt_libraries=""
-qt_includes=""
-
-# Check whether --with-qt-dir or --without-qt-dir was given.
-if test "${with_qt_dir+set}" = set; then
-  withval="$with_qt_dir"
-    ac_qt_includes="$withval"/include
-       ac_qt_libraries="$withval"/lib${tdelibsuff}
-       ac_qt_bindir="$withval"/bin
-
-fi;
-
-
-# Check whether --with-qt-includes or --without-qt-includes was given.
-if test "${with_qt_includes+set}" = set; then
-  withval="$with_qt_includes"
-
-       ac_qt_includes="$withval"
-
-fi;
-
-kde_qt_libs_given=no
-
-
-# Check whether --with-qt-libraries or --without-qt-libraries was given.
-if test "${with_qt_libraries+set}" = set; then
-  withval="$with_qt_libraries"
-    ac_qt_libraries="$withval"
-       kde_qt_libs_given=yes
-
-fi;
-
-if test "${ac_cv_have_qt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  #try to guess Qt locations
-
-qt_incdirs=""
-for dir in $kde_qt_dirs; do
-   qt_incdirs="$qt_incdirs $dir/include $dir"
-done
-qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes"
-if test ! "$ac_qt_includes" = "NO"; then
-   qt_incdirs="$ac_qt_includes $qt_incdirs"
-fi
-
-if test "$kde_qtver" != "1"; then
-  kde_qt_header=ntqstyle.h
-else
-  kde_qt_header=ntqglobal.h
-fi
-
-
-qt_incdir=NO
-for i in $qt_incdirs;
-do
-  for j in $kde_qt_header;
-  do
-    echo "configure: 24440: $i/$j" >&5
-    if test -r "$i/$j"; then
-      echo "taking that" >&5
-      qt_incdir=$i
-      break 2
-    fi
-  done
-done
-
-ac_qt_includes="$qt_incdir"
-
-qt_libdirs=""
-for dir in $kde_qt_dirs; do
-   qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir"
-done
-qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
-if test ! "$ac_qt_libraries" = "NO"; then
-  qt_libdir=$ac_qt_libraries
-else
-  qt_libdirs="$ac_qt_libraries $qt_libdirs"
-  # if the Qt was given, the chance is too big that libqt.* doesn't exist
-  qt_libdir=NONE
-  for dir in $qt_libdirs; do
-    try="ls -1 $dir/${LIBQT_GLOB}"
-    if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&5 ; fi
-  done
-fi
-
-ac_qt_libraries="$qt_libdir"
-
-
-
- ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-
-ac_cxxflags_safe="$CXXFLAGS"
-ac_ldflags_safe="$LDFLAGS"
-ac_libs_safe="$LIBS"
-
-CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
-LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
-LIBS="$LIBS $LIBQT $KDE_MT_LIBS"
-
-
-
-cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <ntqglobal.h>
-#include <ntqapplication.h>
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqevent.h>
-#include <ntqstring.h>
-#include <ntqstyle.h>
-EOF
-
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-#if TQT_VERSION < 210
-#error 1
-#endif
-EOF
-fi
-fi
-
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqcursor.h>
-#include <ntqstylefactory.h>
-#include <private/qucomextra_p.h>
-EOF
-fi
-
-echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
-cat >> conftest.$ac_ext <<EOF
-#error 1
-#endif
-
-int main() {
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-    QStringList *t = new QStringList();
-    Q_UNUSED(t);
-EOF
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-    QString s;
-    s.setLatin1("Elvis is alive", 14);
-EOF
-fi
-fi
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-    (void)QStyleFactory::create(QString::null);
-    QCursor c(Qt::WhatsThisCursor);
-EOF
-fi
-cat >> conftest.$ac_ext <<EOF
-    return 0;
-}
-EOF
-
-
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest; then
-  rm -f conftest*
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_qt_libraries="NO"
-fi
-rm -f conftest*
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
-  ac_cv_have_qt="have_qt=no"
-  ac_qt_notfound=""
-  missing_qt_mt=""
-  if test "$ac_qt_includes" = NO; then
-    if test "$ac_qt_libraries" = NO; then
-      ac_qt_notfound="(headers and libraries)";
-    else
-      ac_qt_notfound="(headers)";
-    fi
-  else
-    if test "x$kde_use_qt_mt" = "xyes"; then
-       missing_qt_mt="
-Make sure that you have compiled Qt with thread support!"
-       ac_qt_notfound="(library $qtlib-mt)";
-    else
-       ac_qt_notfound="(library $qtlib)";
-    fi
-  fi
-
-  { { echo "$as_me:$LINENO: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
-For more details about this problem, look at the end of config.log.$missing_qt_mt" >&5
-echo "$as_me: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
-For more details about this problem, look at the end of config.log.$missing_qt_mt" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  have_qt="yes"
-fi
-
-fi
-
-
-eval "$ac_cv_have_qt"
-
-if test "$have_qt" != yes; then
-  echo "$as_me:$LINENO: result: $have_qt" >&5
-echo "${ECHO_T}$have_qt" >&6;
-else
-  ac_cv_have_qt="have_qt=yes \
-    ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
-  echo "$as_me:$LINENO: result: libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" >&5
-echo "${ECHO_T}libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" >&6
-
-  qt_libraries="$ac_qt_libraries"
-  qt_includes="$ac_qt_includes"
-fi
-
-if test ! "$kde_qt_libs_given" = "yes"; then
-
-
-echo "$as_me:$LINENO: checking if Qt compiles without flags" >&5
-echo $ECHO_N "checking if Qt compiles without flags... $ECHO_C" >&6
-if test "${kde_cv_qt_direct+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
- ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
-ac_LIBRARY_PATH="$LIBRARY_PATH"
-ac_cxxflags_safe="$CXXFLAGS"
-ac_ldflags_safe="$LDFLAGS"
-ac_libs_safe="$LIBS"
-
-CXXFLAGS="$CXXFLAGS -I$qt_includes"
-LDFLAGS="$LDFLAGS $X_LDFLAGS"
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
-else
-LIBS="$LIBQT $LIBSOCKET"
-fi
-LD_LIBRARY_PATH=
-export LD_LIBRARY_PATH
-LIBRARY_PATH=
-export LIBRARY_PATH
-
-
-
-cat > conftest.$ac_ext <<EOF
-#include "confdefs.h"
-#include <ntqglobal.h>
-#include <ntqapplication.h>
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqevent.h>
-#include <ntqstring.h>
-#include <ntqstyle.h>
-EOF
-
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-#if TQT_VERSION < 210
-#error 1
-#endif
-EOF
-fi
-fi
-
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-#include <ntqcursor.h>
-#include <ntqstylefactory.h>
-#include <private/qucomextra_p.h>
-EOF
-fi
-
-echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
-cat >> conftest.$ac_ext <<EOF
-#error 1
-#endif
-
-int main() {
-EOF
-if test "$kde_qtver" = "2"; then
-cat >> conftest.$ac_ext <<EOF
-    QStringList *t = new QStringList();
-    Q_UNUSED(t);
-EOF
-if test $kde_qtsubver -gt 0; then
-cat >> conftest.$ac_ext <<EOF
-    QString s;
-    s.setLatin1("Elvis is alive", 14);
-EOF
-fi
-fi
-if test "$kde_qtver" = "3"; then
-cat >> conftest.$ac_ext <<EOF
-    (void)QStyleFactory::create(QString::null);
-    QCursor c(Qt::WhatsThisCursor);
-EOF
-fi
-cat >> conftest.$ac_ext <<EOF
-    return 0;
-}
-EOF
-
-
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest; then
-  kde_cv_qt_direct="yes"
-else
-  kde_cv_qt_direct="no"
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-fi
-
-rm -f conftest*
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-
-LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
-export LD_LIBRARY_PATH
-LIBRARY_PATH="$ac_LIBRARY_PATH"
-export LIBRARY_PATH
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-fi
-
-
-if test "$kde_cv_qt_direct" = "yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-  qt_libraries=
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-
-fi
-
-fi
-
-
-
-
-if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
- QT_INCLUDES=""
-else
- QT_INCLUDES="-I$qt_includes"
- all_includes="$QT_INCLUDES $all_includes"
-fi
-
-if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
- QT_LDFLAGS=""
-else
- QT_LDFLAGS="-L$qt_libraries"
- all_libraries="$all_libraries $QT_LDFLAGS"
-fi
-test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS"
-
-
-
-
-   qt_bindirs=""
-   for dir in $kde_qt_dirs; do
-      qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
-   done
-   qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
-   if test ! "$ac_qt_bindir" = "NO"; then
-      qt_bindirs="$ac_qt_bindir $qt_bindirs"
-   fi
-
-
-   echo "$as_me:$LINENO: checking for moc" >&5
-echo $ECHO_N "checking for moc... $ECHO_C" >&6
-   if test -n "$MOC"; then
-        kde_cv_path="$MOC";
-   else
-        kde_cache=`echo moc | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$qt_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/moc"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/moc  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/moc"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/moc"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-    { { echo "$as_me:$LINENO: error: No Qt meta object compiler (moc) found!
-Please check whether you installed Qt correctly.
-You need to have a running moc binary.
-configure tried to run $ac_cv_path_moc and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable MOC to the right one before running
-configure.
-" >&5
-echo "$as_me: error: No Qt meta object compiler (moc) found!
-Please check whether you installed Qt correctly.
-You need to have a running moc binary.
-configure tried to run $ac_cv_path_moc and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable MOC to the right one before running
-configure.
-" >&2;}
-   { (exit 1); exit 1; }; }
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      MOC=$kde_cv_path
-
-   fi
-
-   if test -z "$UIC_NOT_NEEDED"; then
-
-   echo "$as_me:$LINENO: checking for uic" >&5
-echo $ECHO_N "checking for uic... $ECHO_C" >&6
-   if test -n "$UIC_PATH"; then
-        kde_cv_path="$UIC_PATH";
-   else
-        kde_cache=`echo uic | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$qt_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/uic"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/uic  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/uic"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/uic"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-      UIC_PATH=""
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      UIC_PATH=$kde_cv_path
-
-   fi
-
-     if test -z "$UIC_PATH" ; then
-
-    { echo "$as_me:$LINENO: WARNING: No Qt ui compiler (uic) found!
-Please check whether you installed Qt correctly.
-You need to have a running uic binary.
-configure tried to run $ac_cv_path_uic and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable UIC to the right one before running
-configure.
-" >&5
-echo "$as_me: WARNING: No Qt ui compiler (uic) found!
-Please check whether you installed Qt correctly.
-You need to have a running uic binary.
-configure tried to run $ac_cv_path_uic and the test didn't
-succeed. If configure shouldn't have tried this one, set
-the environment variable UIC to the right one before running
-configure.
-" >&2;}
-
-       exit 1
-     elif test $kde_qtver = 3; then
-
-    echo "$as_me:$LINENO: checking whether uic supports -L " >&5
-echo $ECHO_N "checking whether uic supports -L ... $ECHO_C" >&6
-    kde_cache=`echo L | sed 'y% .=/+-%____p_%'`
-    if eval "test \"\${kde_cv_prog_uic_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        cat >conftest.ui <<EOT
-        <!DOCTYPE UI><UI version="3" stdsetdef="1"></UI>
-EOT
-        ac_uic_testrun="$UIC_PATH -L /nonexistant conftest.ui >/dev/null"
-        if { (eval echo "$as_me:$LINENO: \"$ac_uic_testrun\"") >&5
-  (eval $ac_uic_testrun) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-            eval "kde_cv_prog_uic_$kde_cache=yes"
-        else
-            eval "kde_cv_prog_uic_$kde_cache=no"
-        fi
-        rm -f conftest*
-
-fi
-
-
-    if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then
-        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        :
-        ac_uic_supports_libpath=yes
-    else
-        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        :
-        ac_uic_supports_libpath=no
-    fi
-
-
-    echo "$as_me:$LINENO: checking whether uic supports -nounload " >&5
-echo $ECHO_N "checking whether uic supports -nounload ... $ECHO_C" >&6
-    kde_cache=`echo nounload | sed 'y% .=/+-%____p_%'`
-    if eval "test \"\${kde_cv_prog_uic_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        cat >conftest.ui <<EOT
-        <!DOCTYPE UI><UI version="3" stdsetdef="1"></UI>
-EOT
-        ac_uic_testrun="$UIC_PATH -nounload  conftest.ui >/dev/null"
-        if { (eval echo "$as_me:$LINENO: \"$ac_uic_testrun\"") >&5
-  (eval $ac_uic_testrun) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-            eval "kde_cv_prog_uic_$kde_cache=yes"
-        else
-            eval "kde_cv_prog_uic_$kde_cache=no"
-        fi
-        rm -f conftest*
-
-fi
-
-
-    if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then
-        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        :
-        ac_uic_supports_nounload=yes
-    else
-        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        :
-        ac_uic_supports_nounload=no
-    fi
-
-
-       UIC=$UIC_PATH
-       if test x$ac_uic_supports_libpath = xyes; then
-           UIC="$UIC -L \$(kde_widgetdir)"
-       fi
-       if test x$ac_uic_supports_nounload = xyes; then
-           UIC="$UIC -nounload"
-       fi
-     fi
-   else
-     UIC="echo uic not available: "
-   fi
-
-
-
-
-   UIC_TR="i18n"
-   if test $kde_qtver = 3; then
-     UIC_TR="tr2i18n"
-   fi
-
-
-
-
-
-if test -n "$LIBJPEG"; then
-echo "$as_me:$LINENO: checking if Qt needs $LIBJPEG" >&5
-echo $ECHO_N "checking if Qt needs $LIBJPEG... $ECHO_C" >&6
-if test "${kde_cv_qt_jpeg+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-
- ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-ac_save_LIBS="$LIBS"
-LIBS="$all_libraries $USER_LDFLAGS $LIBQT"
-LIBS=`echo $LIBS | sed "s/$LIBJPEG//"`
-ac_save_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ntqapplication.h>
-int
-main ()
-{
-
-            int argc;
-            char** argv;
-            QApplication app(argc, argv);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "kde_cv_qt_jpeg=no"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "kde_cv_qt_jpeg=yes"
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS="$ac_save_LIBS"
-CXXFLAGS="$ac_save_CXXFLAGS"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-
-fi
-
-
-if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-  LIBJPEG_QT='$(LIBJPEG)'
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-  LIBJPEG_QT=
-fi
-
-
-
-if test "x$kde_use_qt_emb" != "xyes"; then
-LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)'
-else
-LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)'
-fi
-test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS"
-
-
-
-
-
-
-
-
-
-
-
-
-
-echo "$as_me:$LINENO: checking for rpath" >&5
-echo $ECHO_N "checking for rpath... $ECHO_C" >&6
-# Check whether --enable-rpath or --disable-rpath was given.
-if test "${enable_rpath+set}" = set; then
-  enableval="$enable_rpath"
-  USE_RPATH=$enableval
-else
-  USE_RPATH=yes
-fi;
-
-if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
-
-  KDE_RPATH="-R \$(kde_libraries)"
-
-  if test -n "$qt_libraries"; then
-    KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
-  fi
-    if test -n "$X_LDFLAGS"; then
-    X_RPATH="-R \$(x_libraries)"
-    KDE_RPATH="$KDE_RPATH $X_RPATH"
-  fi
-  if test -n "$KDE_EXTRA_RPATH"; then
-    KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
-  fi
-fi
-
-
-
-echo "$as_me:$LINENO: result: $USE_RPATH" >&5
-echo "${ECHO_T}$USE_RPATH" >&6
-
-echo "$as_me:$LINENO: checking for KDE" >&5
-echo $ECHO_N "checking for KDE... $ECHO_C" >&6
-
-if test "${prefix}" != NONE; then
-  kde_includes=${prefix}/include
-  ac_kde_includes=$prefix/include
-
-  if test "${exec_prefix}" != NONE; then
-     kde_libraries=${libdir}
-     ac_kde_libraries=$libdir
-     if test "$ac_kde_libraries" = '${exec_prefix}/lib'${tdelibsuff}; then
-	ac_kde_libraries=$exec_prefix/lib${tdelibsuff}
-     fi
-  else
-     kde_libraries=${prefix}/lib${tdelibsuff}
-     ac_kde_libraries=$prefix/lib${tdelibsuff}
-  fi
-else
-  ac_kde_includes=
-  ac_kde_libraries=
-  kde_libraries=""
-  kde_includes=""
-fi
-
-if test "${ac_cv_have_kde+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  #try to guess kde locations
-
-if test "$kde_qtver" = 1; then
-  kde_check_header="ksock.h"
-  kde_check_lib="libtdecore.la"
-else
-  kde_check_header="ksharedptr.h"
-  kde_check_lib="libtdeio.la"
-fi
-
-if test -z ""; then
-
-kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes"
-test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs"
-kde_incdirs="$ac_kde_includes $kde_incdirs"
-
-kde_incdir=NO
-for i in $kde_incdirs;
-do
-  for j in $kde_check_header;
-  do
-    echo "configure: 25246: $i/$j" >&5
-    if test -r "$i/$j"; then
-      echo "taking that" >&5
-      kde_incdir=$i
-      break 2
-    fi
-  done
-done
-
-ac_kde_includes="$kde_incdir"
-
-if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
-  { { echo "$as_me:$LINENO: error:
-in the prefix, you've chosen, are no KDE headers installed. This will fail.
-So, check this please and use another prefix!" >&5
-echo "$as_me: error:
-in the prefix, you've chosen, are no KDE headers installed. This will fail.
-So, check this please and use another prefix!" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}"
-test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs"
-kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs"
-
-kde_libdir=NO
-for i in $kde_libdirs;
-do
-  for j in $kde_check_lib;
-  do
-    echo "configure: 25276: $i/$j" >&5
-    if test -r "$i/$j"; then
-      echo "taking that" >&5
-      kde_libdir=$i
-      break 2
-    fi
-  done
-done
-
-ac_kde_libraries="$kde_libdir"
-
-kde_widgetdir=NO
-
-kde_widgetdir=NO
-for i in $kde_libdirs;
-do
-  for j in "kde3/plugins/designer/tdewidgets.la";
-  do
-    echo "configure: 25294: $i/$j" >&5
-    if test -r "$i/$j"; then
-      echo "taking that" >&5
-      kde_widgetdir=$i
-      break 2
-    fi
-  done
-done
-
-
-if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
-{ { echo "$as_me:$LINENO: error:
-in the prefix, you've chosen, are no KDE libraries installed. This will fail.
-So, check this please and use another prefix!" >&5
-echo "$as_me: error:
-in the prefix, you've chosen, are no KDE libraries installed. This will fail.
-So, check this please and use another prefix!" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then
-{ { echo "$as_me:$LINENO: error:
-I can't find the designer plugins. These are required and should have been installed
-by tdelibs" >&5
-echo "$as_me: error:
-I can't find the designer plugins. These are required and should have been installed
-by tdelibs" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-if test -n "$kde_widgetdir"; then
-    kde_widgetdir="$kde_widgetdir/kde3/plugins/designer"
-fi
-
-
-if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then
-  ac_cv_have_kde="have_kde=no"
-else
-  ac_cv_have_kde="have_kde=yes \
-    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
-fi
-
-else
-  ac_cv_have_kde="have_kde=no"
-
-fi
-
-fi
-
-eval "$ac_cv_have_kde"
-
-if test "$have_kde" != "yes"; then
- if test "${prefix}" = NONE; then
-  ac_kde_prefix="$ac_default_prefix"
- else
-  ac_kde_prefix="$prefix"
- fi
- if test "$exec_prefix" = NONE; then
-  ac_kde_exec_prefix="$ac_kde_prefix"
-  echo "$as_me:$LINENO: result: will be installed in $ac_kde_prefix" >&5
-echo "${ECHO_T}will be installed in $ac_kde_prefix" >&6
- else
-  ac_kde_exec_prefix="$exec_prefix"
-  echo "$as_me:$LINENO: result: will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" >&5
-echo "${ECHO_T}will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" >&6
- fi
-
- kde_libraries="${libdir}"
- kde_includes=${ac_kde_prefix}/include
-
-else
-  ac_cv_have_kde="have_kde=yes \
-    ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
-  echo "$as_me:$LINENO: result: libraries $ac_kde_libraries, headers $ac_kde_includes" >&5
-echo "${ECHO_T}libraries $ac_kde_libraries, headers $ac_kde_includes" >&6
-
-  kde_libraries="$ac_kde_libraries"
-  kde_includes="$ac_kde_includes"
-fi
-
-
-
-if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes"  || test "$kde_includes" = "/usr/include"; then
- KDE_INCLUDES=""
-else
- KDE_INCLUDES="-I$kde_includes"
- all_includes="$KDE_INCLUDES $all_includes"
-fi
-
-KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION"
-
-KDE_LDFLAGS="-L$kde_libraries"
-if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then
- all_libraries="$all_libraries $KDE_LDFLAGS"
-fi
-
-
-
-
-
-
-all_libraries="$all_libraries $USER_LDFLAGS"
-all_includes="$all_includes $USER_INCLUDES"
-
-
-
-if test -z ""; then
-
-
-
-if test x$ac_uic_supports_libpath = xyes; then
-
-echo "$as_me:$LINENO: checking if UIC has KDE plugins available" >&5
-echo $ECHO_N "checking if UIC has KDE plugins available... $ECHO_C" >&6
-if test "${kde_cv_uic_plugins+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-cat > actest.ui << EOF
-<!DOCTYPE UI><UI version="3.0" stdsetdef="1">
-<class>NewConnectionDialog</class>
-<widget class="QDialog">
-   <widget class="KLineEdit">
-        <property name="name">
-           <cstring>testInput</cstring>
-        </property>
-   </widget>
-</widget>
-</UI>
-EOF
-
-
-
-kde_cv_uic_plugins=no
-kde_line="$UIC_PATH -L $kde_widgetdir"
-if test x$ac_uic_supports_nounload = xyes; then
-   kde_line="$kde_line -nounload"
-fi
-kde_line="$kde_line -impl actest.h actest.ui > actest.cpp"
-if { (eval echo "$as_me:$LINENO: \"$kde_line\"") >&5
-  (eval $kde_line) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-	if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then
-		kde_cv_uic_plugins=yes
-	fi
-fi
-rm -f actest.ui actest.cpp
-
-fi
-
-
-echo "$as_me:$LINENO: result: $kde_cv_uic_plugins" >&5
-echo "${ECHO_T}$kde_cv_uic_plugins" >&6
-if test "$kde_cv_uic_plugins" != yes; then
-	{ { echo "$as_me:$LINENO: error: you need to install tdelibs first." >&5
-echo "$as_me: error: you need to install tdelibs first." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-fi
-
-fi
-
-ac_kde_libraries="$kde_libdir"
-
-
-
-
-
-  # Check whether --enable-path-check or --disable-path-check was given.
-if test "${enable_path_check+set}" = set; then
-  enableval="$enable_path_check"
-
-  if test "$enableval" = "no";
-    then ac_use_path_checking="default"
-    else ac_use_path_checking=""
-  fi
-
-else
-
-  if test "$kde_qtver" = 1;
-    then ac_use_path_checking=""
-    else ac_use_path_checking="default"
-  fi
-
-
-fi;
-
-
-
-
-echo "$as_me:$LINENO: checking for KDE paths" >&5
-echo $ECHO_N "checking for KDE paths... $ECHO_C" >&6
-kde_result=""
-kde_cached_paths=yes
-if test "${kde_cv_all_paths+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-if test "$ac_use_path_checking" = "default"; then
-
-  if test -z "$kde_htmldir"; then
-    kde_htmldir='\${prefix}/share/doc/HTML'
-  fi
-  if test -z "$kde_appsdir"; then
-    kde_appsdir='\${prefix}/share/applnk'
-  fi
-  if test -z "$kde_icondir"; then
-    kde_icondir='\${prefix}/share/icons'
-  fi
-  if test -z "$kde_sounddir"; then
-    kde_sounddir='\${prefix}/share/sounds'
-  fi
-  if test -z "$kde_datadir"; then
-    kde_datadir='\${prefix}/share/apps'
-  fi
-  if test -z "$kde_locale"; then
-    kde_locale='\${prefix}/share/locale'
-  fi
-  if test -z "$kde_cgidir"; then
-    kde_cgidir='\${exec_prefix}/cgi-bin'
-  fi
-  if test -z "$kde_confdir"; then
-    kde_confdir='\${prefix}/share/config'
-  fi
-  if test -z "$kde_mimedir"; then
-    kde_mimedir='\${prefix}/share/mimelnk'
-  fi
-  if test -z "$kde_toolbardir"; then
-    kde_toolbardir='\${prefix}/share/toolbar'
-  fi
-  if test -z "$kde_wallpaperdir"; then
-    kde_wallpaperdir='\${prefix}/share/wallpapers'
-  fi
-  if test -z "$kde_templatesdir"; then
-    kde_templatesdir='\${prefix}/share/templates'
-  fi
-  if test -z "$kde_bindir"; then
-    kde_bindir='\${exec_prefix}/bin'
-  fi
-  if test -z "$kde_servicesdir"; then
-    kde_servicesdir='\${prefix}/share/services'
-  fi
-  if test -z "$kde_servicetypesdir"; then
-    kde_servicetypesdir='\${prefix}/share/servicetypes'
-  fi
-  if test -z "$kde_moduledir"; then
-    if test "$kde_qtver" = "2"; then
-      kde_moduledir='\${libdir}/kde2'
-    else
-      kde_moduledir='\${libdir}/kde3'
-    fi
-  fi
-  if test -z "$kde_styledir"; then
-    kde_styledir='\${libdir}/kde3/plugins/styles'
-  fi
-  if test -z "$kde_widgetdir"; then
-    kde_widgetdir='\${libdir}/kde3/plugins/designer'
-  fi
-  if test -z "$xdg_appsdir"; then
-    xdg_appsdir='\${datadir}/applications'
-  fi
-  if test -z "$xdg_directorydir"; then
-    xdg_directorydir='\${datadir}/desktop-directories'
-  fi
-
-
-  kde_cv_all_paths="kde_have_all_paths=\"yes\" \
-	kde_htmldir=\"$kde_htmldir\" \
-	kde_appsdir=\"$kde_appsdir\" \
-	kde_icondir=\"$kde_icondir\" \
-	kde_sounddir=\"$kde_sounddir\" \
-	kde_datadir=\"$kde_datadir\" \
-	kde_locale=\"$kde_locale\" \
-	kde_cgidir=\"$kde_cgidir\" \
-	kde_confdir=\"$kde_confdir\" \
-	kde_mimedir=\"$kde_mimedir\" \
-	kde_toolbardir=\"$kde_toolbardir\" \
-	kde_wallpaperdir=\"$kde_wallpaperdir\" \
-	kde_templatesdir=\"$kde_templatesdir\" \
-	kde_bindir=\"$kde_bindir\" \
-	kde_servicesdir=\"$kde_servicesdir\" \
-	kde_servicetypesdir=\"$kde_servicetypesdir\" \
-	kde_moduledir=\"$kde_moduledir\" \
-	kde_styledir=\"$kde_styledir\" \
-	kde_widgetdir=\"$kde_widgetdir\" \
-	xdg_appsdir=\"$xdg_appsdir\" \
-	xdg_directorydir=\"$xdg_directorydir\" \
-	kde_result=defaults"
-
-
-else
-
-  if test $kde_qtver = 1; then
-     echo "$as_me:$LINENO: result: compiling" >&5
-echo "${ECHO_T}compiling" >&6
-
-
-    echo "$as_me:$LINENO: checking for KDE headers installed" >&5
-echo $ECHO_N "checking for KDE headers installed... $ECHO_C" >&6
-
-
-     ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-cat > conftest.$ac_ext <<EOF
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-#include "confdefs.h"
-#include <kapp.h>
-
-int main() {
-    printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data());
-    printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data());
-    printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data());
-    printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data());
-    printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data());
-    printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data());
-    printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data());
-    printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data());
-    printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data());
-    printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data());
-    printf("kde_wallpaperdir=\\"%s\\"\n",
-	TDEApplication::kde_wallpaperdir().data());
-    printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data());
-    printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data());
-    printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_moduledir=\\"/tmp/dummy\\"\n");
-    printf("kde_styledir=\\"/tmp/dummy\\"\n");
-    printf("kde_widgetdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_appsdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_directorydir=\\"/tmp/dummy\\"\n");
-    return 0;
-    }
-EOF
-
- ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- else
-   { { echo "$as_me:$LINENO: error: your system is not able to compile a small KDE application!
-Check, if you installed the KDE header files correctly.
-For more details about this problem, look at the end of config.log." >&5
-echo "$as_me: error: your system is not able to compile a small KDE application!
-Check, if you installed the KDE header files correctly.
-For more details about this problem, look at the end of config.log." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-  KDE_TEST_RPATH=
-
-  if test -n "$USE_RPATH"; then
-
-     if test -n "$kde_libraries"; then
-       KDE_TEST_RPATH="-R $kde_libraries"
-     fi
-
-     if test -n "$qt_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
-     fi
-
-     if test -n "$x_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
-     fi
-
-     KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
-  fi
-
-echo "$as_me:$LINENO: checking for KDE libraries installed" >&5
-echo $ECHO_N "checking for KDE libraries installed... $ECHO_C" >&6
-ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5'
-
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  { { echo "$as_me:$LINENO: error: your system fails at linking a small KDE application!
-Check, if your compiler is installed correctly and if you have used the
-same compiler to compile Qt and tdelibs as you did use now.
-For more details about this problem, look at the end of config.log." >&5
-echo "$as_me: error: your system fails at linking a small KDE application!
-Check, if your compiler is installed correctly and if you have used the
-same compiler to compile Qt and tdelibs as you did use now.
-For more details about this problem, look at the end of config.log." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-if eval `TDEDIR= ./conftest 2>&5`; then
-  kde_result=done
-else
-  kde_result=problems
-fi
-
-TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
-kde_have_all_paths=yes
-
-
-  kde_cv_all_paths="kde_have_all_paths=\"yes\" \
-	kde_htmldir=\"$kde_htmldir\" \
-	kde_appsdir=\"$kde_appsdir\" \
-	kde_icondir=\"$kde_icondir\" \
-	kde_sounddir=\"$kde_sounddir\" \
-	kde_datadir=\"$kde_datadir\" \
-	kde_locale=\"$kde_locale\" \
-	kde_cgidir=\"$kde_cgidir\" \
-	kde_confdir=\"$kde_confdir\" \
-	kde_mimedir=\"$kde_mimedir\" \
-	kde_toolbardir=\"$kde_toolbardir\" \
-	kde_wallpaperdir=\"$kde_wallpaperdir\" \
-	kde_templatesdir=\"$kde_templatesdir\" \
-	kde_bindir=\"$kde_bindir\" \
-	kde_servicesdir=\"$kde_servicesdir\" \
-	kde_servicetypesdir=\"$kde_servicetypesdir\" \
-	kde_moduledir=\"$kde_moduledir\" \
-	kde_styledir=\"$kde_styledir\" \
-	kde_widgetdir=\"$kde_widgetdir\" \
-	xdg_appsdir=\"$xdg_appsdir\" \
-	xdg_directorydir=\"$xdg_directorydir\" \
-	kde_result=$kde_result"
-
-
-
-  else
-     { { echo "$as_me:$LINENO: error: path checking not yet supported for KDE 2" >&5
-echo "$as_me: error: path checking not yet supported for KDE 2" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-
-fi
-
-  kde_cached_paths=no
-
-fi
-
-eval "$kde_cv_all_paths"
- if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
-   test -z "$kde_icondir" || test -z "$kde_sounddir" ||
-   test -z "$kde_datadir" || test -z "$kde_locale"  ||
-   test -z "$kde_cgidir"  || test -z "$kde_confdir" ||
-   test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
-   test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
-   test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
-   test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
-   test -z "$kde_styledir" || test -z "kde_widgetdir" ||
-   test -z "$xdg_appsdir" || test -z "xdg_directorydir"
-   test "x$kde_have_all_paths" != "xyes"; then
-     kde_have_all_paths=no
-  fi
-
-if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
-  # wrong values were cached, may be, we can set better ones
-  kde_result=
-  kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
-  kde_datadir= kde_locale=  kde_cgidir=  kde_confdir=
-  kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
-  kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
-  kde_have_all_paths=
-  kde_styledir=
-  kde_widgetdir=
-  xdg_appsdir = xdg_directorydir=
-
-if test "$ac_use_path_checking" = "default"; then
-
-  if test -z "$kde_htmldir"; then
-    kde_htmldir='\${prefix}/share/doc/HTML'
-  fi
-  if test -z "$kde_appsdir"; then
-    kde_appsdir='\${prefix}/share/applnk'
-  fi
-  if test -z "$kde_icondir"; then
-    kde_icondir='\${prefix}/share/icons'
-  fi
-  if test -z "$kde_sounddir"; then
-    kde_sounddir='\${prefix}/share/sounds'
-  fi
-  if test -z "$kde_datadir"; then
-    kde_datadir='\${prefix}/share/apps'
-  fi
-  if test -z "$kde_locale"; then
-    kde_locale='\${prefix}/share/locale'
-  fi
-  if test -z "$kde_cgidir"; then
-    kde_cgidir='\${exec_prefix}/cgi-bin'
-  fi
-  if test -z "$kde_confdir"; then
-    kde_confdir='\${prefix}/share/config'
-  fi
-  if test -z "$kde_mimedir"; then
-    kde_mimedir='\${prefix}/share/mimelnk'
-  fi
-  if test -z "$kde_toolbardir"; then
-    kde_toolbardir='\${prefix}/share/toolbar'
-  fi
-  if test -z "$kde_wallpaperdir"; then
-    kde_wallpaperdir='\${prefix}/share/wallpapers'
-  fi
-  if test -z "$kde_templatesdir"; then
-    kde_templatesdir='\${prefix}/share/templates'
-  fi
-  if test -z "$kde_bindir"; then
-    kde_bindir='\${exec_prefix}/bin'
-  fi
-  if test -z "$kde_servicesdir"; then
-    kde_servicesdir='\${prefix}/share/services'
-  fi
-  if test -z "$kde_servicetypesdir"; then
-    kde_servicetypesdir='\${prefix}/share/servicetypes'
-  fi
-  if test -z "$kde_moduledir"; then
-    if test "$kde_qtver" = "2"; then
-      kde_moduledir='\${libdir}/kde2'
-    else
-      kde_moduledir='\${libdir}/kde3'
-    fi
-  fi
-  if test -z "$kde_styledir"; then
-    kde_styledir='\${libdir}/kde3/plugins/styles'
-  fi
-  if test -z "$kde_widgetdir"; then
-    kde_widgetdir='\${libdir}/kde3/plugins/designer'
-  fi
-  if test -z "$xdg_appsdir"; then
-    xdg_appsdir='\${datadir}/applications'
-  fi
-  if test -z "$xdg_directorydir"; then
-    xdg_directorydir='\${datadir}/desktop-directories'
-  fi
-
-
-  kde_cv_all_paths="kde_have_all_paths=\"yes\" \
-	kde_htmldir=\"$kde_htmldir\" \
-	kde_appsdir=\"$kde_appsdir\" \
-	kde_icondir=\"$kde_icondir\" \
-	kde_sounddir=\"$kde_sounddir\" \
-	kde_datadir=\"$kde_datadir\" \
-	kde_locale=\"$kde_locale\" \
-	kde_cgidir=\"$kde_cgidir\" \
-	kde_confdir=\"$kde_confdir\" \
-	kde_mimedir=\"$kde_mimedir\" \
-	kde_toolbardir=\"$kde_toolbardir\" \
-	kde_wallpaperdir=\"$kde_wallpaperdir\" \
-	kde_templatesdir=\"$kde_templatesdir\" \
-	kde_bindir=\"$kde_bindir\" \
-	kde_servicesdir=\"$kde_servicesdir\" \
-	kde_servicetypesdir=\"$kde_servicetypesdir\" \
-	kde_moduledir=\"$kde_moduledir\" \
-	kde_styledir=\"$kde_styledir\" \
-	kde_widgetdir=\"$kde_widgetdir\" \
-	xdg_appsdir=\"$xdg_appsdir\" \
-	xdg_directorydir=\"$xdg_directorydir\" \
-	kde_result=defaults"
-
-
-else
-
-  if test $kde_qtver = 1; then
-     echo "$as_me:$LINENO: result: compiling" >&5
-echo "${ECHO_T}compiling" >&6
-
-
-    echo "$as_me:$LINENO: checking for KDE headers installed" >&5
-echo $ECHO_N "checking for KDE headers installed... $ECHO_C" >&6
-
-
-     ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-cat > conftest.$ac_ext <<EOF
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-#include "confdefs.h"
-#include <kapp.h>
-
-int main() {
-    printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data());
-    printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data());
-    printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data());
-    printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data());
-    printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data());
-    printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data());
-    printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data());
-    printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data());
-    printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data());
-    printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data());
-    printf("kde_wallpaperdir=\\"%s\\"\n",
-	TDEApplication::kde_wallpaperdir().data());
-    printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data());
-    printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data());
-    printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
-    printf("kde_moduledir=\\"/tmp/dummy\\"\n");
-    printf("kde_styledir=\\"/tmp/dummy\\"\n");
-    printf("kde_widgetdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_appsdir=\\"/tmp/dummy\\"\n");
-    printf("xdg_directorydir=\\"/tmp/dummy\\"\n");
-    return 0;
-    }
-EOF
-
- ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext'
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- else
-   { { echo "$as_me:$LINENO: error: your system is not able to compile a small KDE application!
-Check, if you installed the KDE header files correctly.
-For more details about this problem, look at the end of config.log." >&5
-echo "$as_me: error: your system is not able to compile a small KDE application!
-Check, if you installed the KDE header files correctly.
-For more details about this problem, look at the end of config.log." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-  KDE_TEST_RPATH=
-
-  if test -n "$USE_RPATH"; then
-
-     if test -n "$kde_libraries"; then
-       KDE_TEST_RPATH="-R $kde_libraries"
-     fi
-
-     if test -n "$qt_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
-     fi
-
-     if test -n "$x_libraries"; then
-       KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
-     fi
-
-     KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
-  fi
-
-echo "$as_me:$LINENO: checking for KDE libraries installed" >&5
-echo $ECHO_N "checking for KDE libraries installed... $ECHO_C" >&6
-ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5'
-
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  { { echo "$as_me:$LINENO: error: your system fails at linking a small KDE application!
-Check, if your compiler is installed correctly and if you have used the
-same compiler to compile Qt and tdelibs as you did use now.
-For more details about this problem, look at the end of config.log." >&5
-echo "$as_me: error: your system fails at linking a small KDE application!
-Check, if your compiler is installed correctly and if you have used the
-same compiler to compile Qt and tdelibs as you did use now.
-For more details about this problem, look at the end of config.log." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-if eval `TDEDIR= ./conftest 2>&5`; then
-  kde_result=done
-else
-  kde_result=problems
-fi
-
-TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
-kde_have_all_paths=yes
-
-
-  kde_cv_all_paths="kde_have_all_paths=\"yes\" \
-	kde_htmldir=\"$kde_htmldir\" \
-	kde_appsdir=\"$kde_appsdir\" \
-	kde_icondir=\"$kde_icondir\" \
-	kde_sounddir=\"$kde_sounddir\" \
-	kde_datadir=\"$kde_datadir\" \
-	kde_locale=\"$kde_locale\" \
-	kde_cgidir=\"$kde_cgidir\" \
-	kde_confdir=\"$kde_confdir\" \
-	kde_mimedir=\"$kde_mimedir\" \
-	kde_toolbardir=\"$kde_toolbardir\" \
-	kde_wallpaperdir=\"$kde_wallpaperdir\" \
-	kde_templatesdir=\"$kde_templatesdir\" \
-	kde_bindir=\"$kde_bindir\" \
-	kde_servicesdir=\"$kde_servicesdir\" \
-	kde_servicetypesdir=\"$kde_servicetypesdir\" \
-	kde_moduledir=\"$kde_moduledir\" \
-	kde_styledir=\"$kde_styledir\" \
-	kde_widgetdir=\"$kde_widgetdir\" \
-	xdg_appsdir=\"$xdg_appsdir\" \
-	xdg_directorydir=\"$xdg_directorydir\" \
-	kde_result=$kde_result"
-
-
-
-  else
-     { { echo "$as_me:$LINENO: error: path checking not yet supported for KDE 2" >&5
-echo "$as_me: error: path checking not yet supported for KDE 2" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-
-fi
-
-  eval "$kde_cv_all_paths"
-   if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
-   test -z "$kde_icondir" || test -z "$kde_sounddir" ||
-   test -z "$kde_datadir" || test -z "$kde_locale"  ||
-   test -z "$kde_cgidir"  || test -z "$kde_confdir" ||
-   test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
-   test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
-   test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
-   test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
-   test -z "$kde_styledir" || test -z "kde_widgetdir" ||
-   test -z "$xdg_appsdir" || test -z "xdg_directorydir"
-   test "x$kde_have_all_paths" != "xyes"; then
-     kde_have_all_paths=no
-  fi
-
-  kde_result="$kde_result (cache overridden)"
-fi
-if test "$kde_have_all_paths" = "no"; then
-  { { echo "$as_me:$LINENO: error: configure could not run a little KDE program to test the environment.
-Since it had compiled and linked before, it must be a strange problem on your system.
-Look at config.log for details. If you are not able to fix this, look at
-http://www.kde.org/faq/installation.html or any www.kde.org mirror.
-(If you're using an egcs version on Linux, you may update binutils!)
-" >&5
-echo "$as_me: error: configure could not run a little KDE program to test the environment.
-Since it had compiled and linked before, it must be a strange problem on your system.
-Look at config.log for details. If you are not able to fix this, look at
-http://www.kde.org/faq/installation.html or any www.kde.org mirror.
-(If you're using an egcs version on Linux, you may update binutils!)
-" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  rm -f conftest*
-  echo "$as_me:$LINENO: result: $kde_result" >&5
-echo "${ECHO_T}$kde_result" >&6
-fi
-
-bindir=$kde_bindir
-
-
-
-# Check whether --with-arts or --without-arts was given.
-if test "${with_arts+set}" = set; then
-  withval="$with_arts"
-  build_arts=$withval
-else
-  build_arts=yes
-
-fi;
-
-
-if test "$build_arts" != "no"; then
-  include_ARTS_TRUE=
-  include_ARTS_FALSE='#'
-else
-  include_ARTS_TRUE='#'
-  include_ARTS_FALSE=
-fi
-
-
-        kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin"
-        test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs"
-        if test -n "$TDEDIRS"; then
-           kde_save_IFS=$IFS
-           IFS=:
-           for dir in $TDEDIRS; do
-                kde_default_bindirs="$dir/bin $kde_default_bindirs "
-           done
-           IFS=$kde_save_IFS
-        fi
-        kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs"
-
-   echo "$as_me:$LINENO: checking for dcopidl" >&5
-echo $ECHO_N "checking for dcopidl... $ECHO_C" >&6
-   if test -n "$DCOPIDL"; then
-        kde_cv_path="$DCOPIDL";
-   else
-        kde_cache=`echo dcopidl | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$kde_default_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/dcopidl"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/dcopidl  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/dcopidl"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/dcopidl"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-    { { echo "$as_me:$LINENO: error: The important program dcopidl was not found!
-Please check whether you installed KDE correctly.
-" >&5
-echo "$as_me: error: The important program dcopidl was not found!
-Please check whether you installed KDE correctly.
-" >&2;}
-   { (exit 1); exit 1; }; }
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      DCOPIDL=$kde_cv_path
-
-   fi
-
-
-   echo "$as_me:$LINENO: checking for dcopidl2cpp" >&5
-echo $ECHO_N "checking for dcopidl2cpp... $ECHO_C" >&6
-   if test -n "$DCOPIDL2CPP"; then
-        kde_cv_path="$DCOPIDL2CPP";
-   else
-        kde_cache=`echo dcopidl2cpp | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$kde_default_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/dcopidl2cpp"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/dcopidl2cpp  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/dcopidl2cpp"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/dcopidl2cpp"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-    { { echo "$as_me:$LINENO: error: The important program dcopidl2cpp was not found!
-Please check whether you installed KDE correctly.
-" >&5
-echo "$as_me: error: The important program dcopidl2cpp was not found!
-Please check whether you installed KDE correctly.
-" >&2;}
-   { (exit 1); exit 1; }; }
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      DCOPIDL2CPP=$kde_cv_path
-
-   fi
-
-        if test "$build_arts" != "no"; then
-
-   echo "$as_me:$LINENO: checking for mcopidl" >&5
-echo $ECHO_N "checking for mcopidl... $ECHO_C" >&6
-   if test -n "$MCOPIDL"; then
-        kde_cv_path="$MCOPIDL";
-   else
-        kde_cache=`echo mcopidl | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$kde_default_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/mcopidl"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/mcopidl  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/mcopidl"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/mcopidl"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-    { { echo "$as_me:$LINENO: error: The important program mcopidl was not found!
-Please check whether you installed aRts correctly.
-" >&5
-echo "$as_me: error: The important program mcopidl was not found!
-Please check whether you installed aRts correctly.
-" >&2;}
-   { (exit 1); exit 1; }; }
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      MCOPIDL=$kde_cv_path
-
-   fi
-
-
-   echo "$as_me:$LINENO: checking for artsc-config" >&5
-echo $ECHO_N "checking for artsc-config... $ECHO_C" >&6
-   if test -n "$ARTSCCONFIG"; then
-        kde_cv_path="$ARTSCCONFIG";
-   else
-        kde_cache=`echo artsc-config | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$kde_default_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/artsc-config"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/artsc-config  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/artsc-config"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/artsc-config"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-    { { echo "$as_me:$LINENO: error: The important program artsc-config was not found!
-Please check whether you installed aRts correctly.
-" >&5
-echo "$as_me: error: The important program artsc-config was not found!
-Please check whether you installed aRts correctly.
-" >&2;}
-   { (exit 1); exit 1; }; }
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      ARTSCCONFIG=$kde_cv_path
-
-   fi
-
-        fi
-
-   echo "$as_me:$LINENO: checking for tde-config" >&5
-echo $ECHO_N "checking for tde-config... $ECHO_C" >&6
-   if test -n "$KDECONFIG"; then
-        kde_cv_path="$KDECONFIG";
-   else
-        kde_cache=`echo tde-config | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$kde_default_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/tde-config"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/tde-config  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/tde-config"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/tde-config"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      KDECONFIG=$kde_cv_path
-
-   fi
-
-
-   echo "$as_me:$LINENO: checking for brockenboring" >&5
-echo $ECHO_N "checking for brockenboring... $ECHO_C" >&6
-   if test -n "$BROCKENBORING"; then
-        kde_cv_path="$BROCKENBORING";
-   else
-        kde_cache=`echo brockenboring | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$kde_default_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/brockenboring"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/brockenboring  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/brockenboring"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/brockenboring"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      BROCKENBORING=$kde_cv_path
-
-   fi
-
-	if test -n "$BROCKENBORING"; then
-
-   echo "$as_me:$LINENO: checking for tdeinit_wrapper" >&5
-echo $ECHO_N "checking for tdeinit_wrapper... $ECHO_C" >&6
-   if test -n "$BROCKENBORING"; then
-        kde_cv_path="$BROCKENBORING";
-   else
-        kde_cache=`echo tdeinit_wrapper | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$kde_default_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/tdeinit_wrapper"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/tdeinit_wrapper  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/tdeinit_wrapper"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/tdeinit_wrapper"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      BROCKENBORING=$kde_cv_path
-
-   fi
-
-	fi
-
-   echo "$as_me:$LINENO: checking for meinproc" >&5
-echo $ECHO_N "checking for meinproc... $ECHO_C" >&6
-   if test -n "$MEINPROC"; then
-        kde_cv_path="$MEINPROC";
-   else
-        kde_cache=`echo meinproc | sed 'y%./+-%__p_%'`
-
-        if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-        kde_cv_path="NONE"
-	dirs="$kde_default_bindirs"
-	kde_save_IFS=$IFS
-	IFS=':'
-	for dir in $PATH; do
-	  dirs="$dirs $dir"
-        done
-	IFS=$kde_save_IFS
-
-        for dir in $dirs; do
-	  if test -x "$dir/meinproc"; then
-	    if test -n ""
-	    then
-              evalstr="$dir/meinproc  2>&1 "
-	      if eval $evalstr; then
-                kde_cv_path="$dir/meinproc"
-                break
-	      fi
-            else
-		kde_cv_path="$dir/meinproc"
-                break
-	    fi
-          fi
-        done
-
-        eval "kde_cv_path_$kde_cache=$kde_cv_path"
-
-
-fi
-
-
-      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
-
-   fi
-
-   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
-      echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-
-   else
-      echo "$as_me:$LINENO: result: $kde_cv_path" >&5
-echo "${ECHO_T}$kde_cv_path" >&6
-      MEINPROC=$kde_cv_path
-
-   fi
-
-
-        if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then
- 	    kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share"
-            test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs"
-
-KDE_XSL_STYLESHEET=NO
-for i in $kde_sharedirs;
-do
-  for j in apps/ksgmltools2/customization/kde-chunk.xsl;
-  do
-    echo "configure: 26621: $i/$j" >&5
-    if test -r "$i/$j"; then
-      echo "taking that" >&5
-      KDE_XSL_STYLESHEET=$i
-      break 2
-    fi
-  done
-done
-
-	    if test "$KDE_XSL_STYLESHEET" = "NO"; then
-		KDE_XSL_STYLESHEET=""
-	    else
-                KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl"
-	    fi
-        fi
-
-        DCOP_DEPENDENCIES='$(DCOPIDL)'
-
-
-
-
-
-
-
-
-
-
-        if test -x "$KDECONFIG"; then # it can be "compiled"
-          kde_libs_prefix=`$KDECONFIG --prefix`
-          if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
-               { { echo "$as_me:$LINENO: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs.
-                          This means it has been moved since you installed it.
-                          This won't work. Please recompile tdelibs for the new prefix.
-                          " >&5
-echo "$as_me: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs.
-                          This means it has been moved since you installed it.
-                          This won't work. Please recompile tdelibs for the new prefix.
-                          " >&2;}
-   { (exit 1); exit 1; }; }
-           fi
-           kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
-        else
-           kde_libs_prefix='$(prefix)'
-           kde_libs_htmldir='$(kde_htmldir)'
-        fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-tdeinitdir='$(kde_moduledir)'
-
-
-
-if test "$kde_qtver" = 1; then
-  kde_minidir="$kde_icondir/mini"
-else
-# for KDE 1 - this breaks KDE2 apps using minidir, but
-# that's the plan ;-/
-  kde_minidir="/dev/null"
-fi
-
-
-
-
-
-
-if test $kde_qtver = 3; then
-   LIB_TDECORE="-ltdecore"
-
-   LIB_TDEUI="-ltdeui"
-
-   LIB_TDEIO="-ltdeio"
-
-   LIB_SMB="-lsmb"
-
-   LIB_KAB="-lkab"
-
-   LIB_KABC="-ltdeabc"
-
-   LIB_TDEHTML="-ltdehtml"
-
-   LIB_TDESPELL="-ltdespell"
-
-   LIB_TDEPARTS="-ltdeparts"
-
-   LIB_TDEPRINT="-ltdeprint"
-
-# these are for backward compatibility
-   LIB_TDESYCOCA="-ltdeio"
-
-   LIB_KFILE="-ltdeio"
-
-elif test $kde_qtver = 2; then
-   LIB_TDECORE="-ltdecore"
-
-   LIB_TDEUI="-ltdeui"
-
-   LIB_TDEIO="-ltdeio"
-
-   LIB_TDESYCOCA="-ltdesycoca"
-
-   LIB_SMB="-lsmb"
-
-   LIB_KFILE="-ltdefile"
-
-   LIB_KAB="-lkab"
-
-   LIB_TDEHTML="-ltdehtml"
-
-   LIB_TDESPELL="-ltdespell"
-
-   LIB_TDEPARTS="-ltdeparts"
-
-   LIB_TDEPRINT="-ltdeprint"
-
-else
-   LIB_TDECORE="-ltdecore -lXext $(LIB_QT)"
-
-   LIB_TDEUI="-ltdeui $(LIB_TDECORE)"
-
-   LIB_KFM="-lkfm $(LIB_TDECORE)"
-
-   LIB_KFILE="-ltdefile $(LIB_KFM) $(LIB_TDEUI)"
-
-   LIB_KAB="-lkab $(LIB_KIMGIO) $(LIB_TDECORE)"
-
-fi
-
-
-#MIN_CONFIG(3)
-
-
-
-DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
-
-if test ! -s $srcdir/subdirs; then
-    TOPSUBDIRS=""
-  files=`cd $srcdir && ls -1`
-  dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
-  for i in $dirs; do
-    echo $i >> $srcdir/subdirs
-  done
-fi
-
-if test -s $srcdir/inst-apps; then
-  ac_topsubdirs="`cat $srcdir/inst-apps`"
-else
-  ac_topsubdirs="`cat $srcdir/subdirs`"
-fi
-
-for i in $ac_topsubdirs; do
-  echo "$as_me:$LINENO: checking if $i should be compiled" >&5
-echo $ECHO_N "checking if $i should be compiled... $ECHO_C" >&6
-  if test -d $srcdir/$i; then
-    install_it="yes"
-    for j in $DO_NOT_COMPILE; do
-      if test $i = $j; then
-        install_it="no"
-      fi
-    done
-  else
-    install_it="no"
-  fi
-  echo "$as_me:$LINENO: result: $install_it" >&5
-echo "${ECHO_T}$install_it" >&6
-  vari=`echo $i | sed -e 's,[-+.],_,g'`
-  if test $install_it = "yes"; then
-    TOPSUBDIRS="$TOPSUBDIRS $i"
-    eval "$vari""_SUBDIR_included=yes"
-  else
-    eval "$vari""_SUBDIR_included=no"
-  fi
-done
-
-
-
-          ac_config_files="$ac_config_files Makefile"
-
-          ac_config_files="$ac_config_files colorscheme/Makefile"
-
-          ac_config_files="$ac_config_files malloryclient/Makefile"
-
-          ac_config_files="$ac_config_files malloryclient/config/Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
-  (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-} |
-  sed '
-     t clear
-     : clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-    cat confcache >$cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${include_ARTS_TRUE}" && test -z "${include_ARTS_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"include_ARTS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"include_ARTS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  -q | -quiet | --quiet | --tquie | --tqui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS section.
-#
-
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "colorscheme/Makefile" ) CONFIG_FILES="$CONFIG_FILES colorscheme/Makefile" ;;
-  "malloryclient/Makefile" ) CONFIG_FILES="$CONFIG_FILES malloryclient/Makefile" ;;
-  "malloryclient/config/Makefile" ) CONFIG_FILES="$CONFIG_FILES malloryclient/config/Makefile" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@target@,$target,;t t
-s,@target_cpu@,$target_cpu,;t t
-s,@target_vendor@,$target_vendor,;t t
-s,@target_os@,$target_os,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@CONF_FILES@,$CONF_FILES,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@CPP@,$CPP,;t t
-s,@CXX@,$CXX,;t t
-s,@CXXFLAGS@,$CXXFLAGS,;t t
-s,@ac_ct_CXX@,$ac_ct_CXX,;t t
-s,@CXXDEPMODE@,$CXXDEPMODE,;t t
-s,@WOVERLOADED_VIRTUAL@,$WOVERLOADED_VIRTUAL,;t t
-s,@USE_EXCEPTIONS@,$USE_EXCEPTIONS,;t t
-s,@USE_RTTI@,$USE_RTTI,;t t
-s,@CXXCPP@,$CXXCPP,;t t
-s,@NOOPT_CXXFLAGS@,$NOOPT_CXXFLAGS,;t t
-s,@NOOPT_CFLAGS@,$NOOPT_CFLAGS,;t t
-s,@KDE_USE_FINAL_TRUE@,$KDE_USE_FINAL_TRUE,;t t
-s,@KDE_USE_FINAL_FALSE@,$KDE_USE_FINAL_FALSE,;t t
-s,@KDE_USE_CLOSURE_TRUE@,$KDE_USE_CLOSURE_TRUE,;t t
-s,@KDE_USE_CLOSURE_FALSE@,$KDE_USE_CLOSURE_FALSE,;t t
-s,@KDE_NO_UNDEFINED@,$KDE_NO_UNDEFINED,;t t
-s,@KDE_USE_NMCHECK_TRUE@,$KDE_USE_NMCHECK_TRUE,;t t
-s,@KDE_USE_NMCHECK_FALSE@,$KDE_USE_NMCHECK_FALSE,;t t
-s,@LN_S@,$LN_S,;t t
-s,@ECHO@,$ECHO,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@EGREP@,$EGREP,;t t
-s,@LIBTOOL@,$LIBTOOL,;t t
-s,@KDE_PLUGIN@,$KDE_PLUGIN,;t t
-s,@MSGFMT@,$MSGFMT,;t t
-s,@GMSGFMT@,$GMSGFMT,;t t
-s,@XGETTEXT@,$XGETTEXT,;t t
-s,@LIBUTIL@,$LIBUTIL,;t t
-s,@LIBCOMPAT@,$LIBCOMPAT,;t t
-s,@LIBCRYPT@,$LIBCRYPT,;t t
-s,@LIBRESOLV@,$LIBRESOLV,;t t
-s,@LIB_POLL@,$LIB_POLL,;t t
-s,@FRAMEWORK_COREAUDIO@,$FRAMEWORK_COREAUDIO,;t t
-s,@LIBSOCKET@,$LIBSOCKET,;t t
-s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t
-s,@LIBUCB@,$LIBUCB,;t t
-s,@LIBDL@,$LIBDL,;t t
-s,@X_INCLUDES@,$X_INCLUDES,;t t
-s,@X_LDFLAGS@,$X_LDFLAGS,;t t
-s,@x_libraries@,$x_libraries,;t t
-s,@x_includes@,$x_includes,;t t
-s,@LIBSM@,$LIBSM,;t t
-s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t
-s,@LIB_X11@,$LIB_X11,;t t
-s,@QTE_NORTTI@,$QTE_NORTTI,;t t
-s,@LIB_XEXT@,$LIB_XEXT,;t t
-s,@LIBPTHREAD@,$LIBPTHREAD,;t t
-s,@USE_THREADS@,$USE_THREADS,;t t
-s,@KDE_MT_LDFLAGS@,$KDE_MT_LDFLAGS,;t t
-s,@KDE_MT_LIBS@,$KDE_MT_LIBS,;t t
-s,@USER_INCLUDES@,$USER_INCLUDES,;t t
-s,@USER_LDFLAGS@,$USER_LDFLAGS,;t t
-s,@LIBZ@,$LIBZ,;t t
-s,@LIBPNG@,$LIBPNG,;t t
-s,@LIBJPEG@,$LIBJPEG,;t t
-s,@qt_libraries@,$qt_libraries,;t t
-s,@qt_includes@,$qt_includes,;t t
-s,@QT_INCLUDES@,$QT_INCLUDES,;t t
-s,@QT_LDFLAGS@,$QT_LDFLAGS,;t t
-s,@MOC@,$MOC,;t t
-s,@UIC@,$UIC,;t t
-s,@UIC_TR@,$UIC_TR,;t t
-s,@LIB_QT@,$LIB_QT,;t t
-s,@LIB_QPE@,$LIB_QPE,;t t
-s,@kde_qtver@,$kde_qtver,;t t
-s,@KDE_EXTRA_RPATH@,$KDE_EXTRA_RPATH,;t t
-s,@KDE_RPATH@,$KDE_RPATH,;t t
-s,@X_RPATH@,$X_RPATH,;t t
-s,@kde_libraries@,$kde_libraries,;t t
-s,@kde_includes@,$kde_includes,;t t
-s,@KDE_LDFLAGS@,$KDE_LDFLAGS,;t t
-s,@KDE_INCLUDES@,$KDE_INCLUDES,;t t
-s,@all_includes@,$all_includes,;t t
-s,@all_libraries@,$all_libraries,;t t
-s,@AUTODIRS@,$AUTODIRS,;t t
-s,@include_ARTS_TRUE@,$include_ARTS_TRUE,;t t
-s,@include_ARTS_FALSE@,$include_ARTS_FALSE,;t t
-s,@DCOPIDL@,$DCOPIDL,;t t
-s,@DCOPIDL2CPP@,$DCOPIDL2CPP,;t t
-s,@DCOP_DEPENDENCIES@,$DCOP_DEPENDENCIES,;t t
-s,@MCOPIDL@,$MCOPIDL,;t t
-s,@ARTSCCONFIG@,$ARTSCCONFIG,;t t
-s,@KDECONFIG@,$KDECONFIG,;t t
-s,@BROCKENBORING@,$BROCKENBORING,;t t
-s,@MEINPROC@,$MEINPROC,;t t
-s,@KDE_XSL_STYLESHEET@,$KDE_XSL_STYLESHEET,;t t
-s,@kde_libs_prefix@,$kde_libs_prefix,;t t
-s,@kde_libs_htmldir@,$kde_libs_htmldir,;t t
-s,@kde_htmldir@,$kde_htmldir,;t t
-s,@kde_appsdir@,$kde_appsdir,;t t
-s,@kde_icondir@,$kde_icondir,;t t
-s,@kde_sounddir@,$kde_sounddir,;t t
-s,@kde_datadir@,$kde_datadir,;t t
-s,@kde_locale@,$kde_locale,;t t
-s,@kde_confdir@,$kde_confdir,;t t
-s,@kde_mimedir@,$kde_mimedir,;t t
-s,@kde_wallpaperdir@,$kde_wallpaperdir,;t t
-s,@kde_bindir@,$kde_bindir,;t t
-s,@xdg_appsdir@,$xdg_appsdir,;t t
-s,@xdg_directorydir@,$xdg_directorydir,;t t
-s,@kde_templatesdir@,$kde_templatesdir,;t t
-s,@kde_servicesdir@,$kde_servicesdir,;t t
-s,@kde_servicetypesdir@,$kde_servicetypesdir,;t t
-s,@kde_moduledir@,$kde_moduledir,;t t
-s,@tdeinitdir@,$tdeinitdir,;t t
-s,@kde_styledir@,$kde_styledir,;t t
-s,@kde_widgetdir@,$kde_widgetdir,;t t
-s,@LIB_TDECORE@,$LIB_TDECORE,;t t
-s,@LIB_TDEUI@,$LIB_TDEUI,;t t
-s,@LIB_TDEIO@,$LIB_TDEIO,;t t
-s,@LIB_SMB@,$LIB_SMB,;t t
-s,@LIB_KAB@,$LIB_KAB,;t t
-s,@LIB_KABC@,$LIB_KABC,;t t
-s,@LIB_TDEHTML@,$LIB_TDEHTML,;t t
-s,@LIB_TDESPELL@,$LIB_TDESPELL,;t t
-s,@LIB_TDEPARTS@,$LIB_TDEPARTS,;t t
-s,@LIB_TDEPRINT@,$LIB_TDEPRINT,;t t
-s,@LIB_TDESYCOCA@,$LIB_TDESYCOCA,;t t
-s,@LIB_KFILE@,$LIB_KFILE,;t t
-s,@LIB_KFM@,$LIB_KFM,;t t
-s,@TOPSUBDIRS@,$TOPSUBDIRS,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-  esac
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-  # Run the commands associated with the file.
-  case $ac_file in
-    config.h ) # update the timestamp
-echo 'timestamp for config.h' >"./stamp-h1"
- ;;
-  esac
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_dest" : 'X\(//\)[^/]' \| \
-	 X"$ac_dest" : 'X\(//\)$' \| \
-	 X"$ac_dest" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`(dirname "$mf") 2>/dev/null ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$mf" : 'X\(//\)[^/]' \| \
-	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  else
-    continue
-  fi
-  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
-  # Extract the definition of DEP_FILES from the Makefile without
-  # running `make'.
-  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n -e '/^U = / s///p' < "$mf"`
-  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-  # We invoke sed twice because it is the simplest approach to
-  # changing $(DEPDIR) to its actual value in the expansion.
-  for file in `sed -n -e '
-    /^DEP_FILES = .*\\\\$/ {
-      s/^DEP_FILES = //
-      :loop
-	s/\\\\$//
-	p
-	n
-	/\\\\$/ b loop
-      p
-    }
-    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`(dirname "$file") 2>/dev/null ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$file" : 'X\(//\)[^/]' \| \
-	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    { if $as_mkdir_p; then
-    mkdir -p $dirpart/$fdir
-  else
-    as_dir=$dirpart/$fdir
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
- ;;
-  esac
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-if test "x$with_fast_perl" = "xyes"; then    
-  perl -i.bak $ac_aux_dir/conf.change.pl $CONFIG_STATUS    \
-    || mv $CONFIG_STATUS.bak $CONFIG_STATUS    
-  rm -f $CONFIG_STATUS.bak
-fi    
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-if test "$all_tests" = "bad"; then
-  if test ! "$cache_file" = "/dev/null"; then
-    echo ""
-    echo "Please remove the file $cache_file after changing your setup"
-    echo "so that configure will find the changes next time."
-    echo ""
-  fi
-else
-  echo ""
-  echo "Good - your configure finished. Start make now"
-  echo ""
-fi
diff --git a/configure.files b/configure.files
deleted file mode 100644
index 030bce8..0000000
--- a/configure.files
+++ /dev/null
@@ -1,2 +0,0 @@
-./admin/configure.in.min
-configure.in.in
diff --git a/configure.in b/configure.in
deleted file mode 100644
index 365ddaa..0000000
--- a/configure.in
+++ /dev/null
@@ -1,78 +0,0 @@
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
- 
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
- 
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
- 
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-dnl    Boston, MA 02111-1307, USA.
-
-# Original Author was Kalle@kde.org
-# I lifted it in some mater. (Stephan Kulow)
-# I used much code from Janos Farkas
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_INIT(acinclude.m4) dnl a source file from your sub dir
-
-dnl This is so we can use kde-common
-AC_CONFIG_AUX_DIR(admin)
-
-dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
-unset CDPATH
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_SYSTEM 
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-dnl Automake doc recommends to do this only here. (Janos)
-AM_INIT_AUTOMAKE(mallory, 1.0) dnl searches for some needed programs
-
-KDE_SET_PREFIX
-
-dnl generate the config header
-AM_CONFIG_HEADER(config.h) dnl at the distribution this done
-
-dnl Checks for programs.
-AC_CHECK_COMPILERS
-AC_ENABLE_SHARED(yes)
-AC_ENABLE_STATIC(no)
-KDE_PROG_LIBTOOL
-
-dnl for NLS support. Call them in this order!
-dnl WITH_NLS is for the po files
-AM_KDE_WITH_NLS
-
-KDE_USE_QT(3)
-AC_PATH_KDE
-#MIN_CONFIG(3)
-
-dnl PACKAGE set before
-KDE_CREATE_SUBDIRSLIST
-AC_CONFIG_FILES([ Makefile ])
-AC_CONFIG_FILES([ colorscheme/Makefile ])
-AC_CONFIG_FILES([ malloryclient/Makefile ])
-AC_CONFIG_FILES([ malloryclient/config/Makefile ])
-AC_OUTPUT
-if test "$all_tests" = "bad"; then
-  if test ! "$cache_file" = "/dev/null"; then
-    echo ""    
-    echo "Please remove the file $cache_file after changing your setup"
-    echo "so that configure will find the changes next time."
-    echo ""
-  fi
-else
-  echo ""
-  echo "Good - your configure finished. Start make now"
-  echo ""
-fi
diff --git a/configure.in.in b/configure.in.in
deleted file mode 100644
index 5037cf2..0000000
--- a/configure.in.in
+++ /dev/null
@@ -1,3 +0,0 @@
-#MIN_CONFIG(3)
-
-AM_INIT_AUTOMAKE(mallory, 1.0)
diff --git a/libtool b/libtool
deleted file mode 100755
index 2dde92a..0000000
--- a/libtool
+++ /dev/null
@@ -1,6444 +0,0 @@
-#! /bin/sh
-
-# libtoolT - Provide generalized library-building support services.
-# Generated automatically by  (GNU mallory 1.0)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# The names of the tagged configurations supported by this script.
-available_tags=" CXX GCJ"
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host tinbox:
-
-# Shell to use when invoking shell scripts.
-SHELL="/bin/sh"
-
-# Whether or not to build shared libraries.
-build_libtool_libs=yes
-
-# Whether or not to build static libraries.
-build_old_libs=no
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=no
-
-# Whether or not to optimize for fast installation.
-fast_install=yes
-
-# The host system.
-host_alias=
-host=i686-pc-linux-gnu
-
-# An echo program that does not interpret backslashes.
-echo="echo"
-
-# The archiver.
-AR="ar"
-AR_FLAGS="cru"
-
-# A C compiler.
-LTCC="gcc"
-
-# A language-specific compiler.
-CC="gcc"
-
-# Is the compiler the GNU C compiler?
-with_gcc=yes
-
-# The linker used to build libraries.
-LD="/usr/i586-suse-linux/bin/ld"
-
-# Whether we need hard or soft links.
-LN_S="ln -s"
-
-# A BSD-compatible nm program.
-NM="/usr/bin/nm -B"
-
-# A sed program that does not truncate output.
-SED="sed"
-
-# A symbol stripping program
-STRIP=strip
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=file
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="dlltool"
-
-# Used on cygwin: object dumper.
-OBJDUMP="objdump"
-
-# Used on cygwin: assembler.
-AS="as"
-
-# The name of the directory that contains temporary libtool files.
-objdir=.libs
-
-# How to create reloadable object files.
-reload_flag=" -r"
-reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
-
-# How to pass a linker flag through the compiler.
-wl="-Wl,"
-
-# Object file suffix (normally "o").
-objext="o"
-
-# Old archive suffix (normally "a").
-libext="a"
-
-# Executable file suffix (normally "").
-exeext=""
-
-# Additional compiler flags for building library objects.
-pic_flag=" -fPIC -DPIC"
-pic_mode=default
-
-# What is the maximum length of a command?
-max_cmd_len=32768
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o="yes"
-
-# Must we lock files when doing compilation ?
-need_locks="no"
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=no
-
-# Do we need a version for libraries?
-need_version=no
-
-# Whether dlopen is supported.
-dlopen_support=unknown
-
-# Whether dlopen of programs is supported.
-dlopen_self=unknown
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=unknown
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="-static"
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=" -fno-builtin"
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="\${wl}--export-dynamic"
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=""
-
-# Library versioning type.
-version_type=linux
-
-# Format of library name prefix.
-libname_spec="lib\$name"
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so"
-
-# The coded name of the library, if different from the real name.
-soname_spec="\${libname}\${release}.so\$major"
-
-# Commands used to build and install an old-style archive.
-RANLIB="ranlib"
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
-old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib"
-old_postuninstall_cmds=""
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=""
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=""
-
-# Commands used to build and install a shared archive.
-archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
-archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
-postinstall_cmds=""
-postuninstall_cmds=""
-
-# Commands to strip libraries.
-old_striplib="strip --strip-debug"
-striplib="strip --strip-unneeded"
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=""
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=""
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=""
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=""
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=""
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method="pass_all"
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd="\$MAGIC_CMD"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=""
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=""
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=""
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="sed -n -e 's/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'"
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'"
-
-# This is the shared library runtime path variable.
-runpath_var=LD_RUN_PATH
-
-# This is the shared library path variable.
-shlibpath_var=LD_LIBRARY_PATH
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=no
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=immediate
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=yes
-
-# Flag to hardcode $libdir into a binary during linking.
-# This must work even if $libdir does not exist.
-hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=""
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=no
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=no
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=unsupported
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="PATH  LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=unknown
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-# Fix the shell variable $srcfile for the compiler.
-fix_srcfile_path=""
-
-# Set to yes if exported symbols are required.
-always_export_symbols=no
-
-# The commands to list exported symbols.
-export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols"
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=""
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-
-# Symbols that must always be exported.
-include_expsyms=""
-
-# ### END LIBTOOL CONFIG
-
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
-fi
-
-# The name of this program.
-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.4e
-TIMESTAMP=" (1.1090 2002/02/07 19:54:36)"
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-: ${IFS=" 	"}
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  echo "$modename: not configured to build any kind of library" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
-  shift
-
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	echo "$progname: invalid tag name: $tagname" 1>&2
-	exit 1
-	;;
-      esac
-
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
-	else
-	  echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    echo
-    echo "Copyright 1996, 1997, 1998, 1999, 2000, 2001"
-    echo "Free Software Foundation, Inc."
-    echo "This is free software; see the source for copying conditions.  There is NO"
-    echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit 0
-    ;;
-
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
-    done
-    exit 0
-    ;;
-
-  --debug)
-    echo "$progname: enabling shell trace mode"
-    set -x
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
-    else
-      echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
-    else
-      echo "disable static libraries"
-    fi
-    exit 0
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --preserve-dup-deps) duplicate_deps="yes" ;;
-
-  --quiet | --silent)
-    show=:
-    ;;
-
-  --tag) prevopt="--tag" prev=tag ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
-
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-fi
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    case $nonopt in
-    *cc | *++ | gcc* | *-gcc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
-
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
-
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    prev=
-    lastarg=
-    srcfile="$nonopt"
-    suppress_output=
-
-    user_target=no
-    for arg
-    do
-      case $prev in
-      "") ;;
-      xcompiler)
-	# Aesthetically quote the previous argument.
-	prev=
-	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-
-	case $arg in
-	# Double-quote args containing other shell metacharacters.
-	# Many Bourne shells cannot handle close brackets correctly
-	# in scan sets, so we specify it separately.
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-
-	# Add the previous argument to base_compile.
-	if test -z "$base_compile"; then
-	  base_compile="$lastarg"
-	else
-	  base_compile="$base_compile $lastarg"
-	fi
-	continue
-	;;
-      esac
-
-      # Accept any command-line options.
-      case $arg in
-      -o)
-	if test "$user_target" != "no"; then
-	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	  exit 1
-	fi
-	user_target=next
-	;;
-
-      -static)
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-	lastarg=
-	save_ifs="$IFS"; IFS=','
-	for arg in $args; do
-	  IFS="$save_ifs"
-
-	  # Double-quote args containing other shell metacharacters.
-	  # Many Bourne shells cannot handle close brackets correctly
-	  # in scan sets, so we specify it separately.
-	  case $arg in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    arg="\"$arg\""
-	    ;;
-	  esac
-	  lastarg="$lastarg $arg"
-	done
-	IFS="$save_ifs"
-	lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
-	# Add the arguments to base_compile.
-	if test -z "$base_compile"; then
-	  base_compile="$lastarg"
-	else
-	  base_compile="$base_compile $lastarg"
-	fi
-	continue
-	;;
-      esac
-
-      case $user_target in
-      next)
-	# The next one is the -o target name
-	user_target=yes
-	continue
-	;;
-      yes)
-	# We got the output file
-	user_target=set
-	libobj="$arg"
-	continue
-	;;
-      esac
-
-      # Accept the current argument as the source file.
-      lastarg="$srcfile"
-      srcfile="$arg"
-
-      # Aesthetically quote the previous argument.
-
-      # Backslashify any backslashes, double quotes, and dollar signs.
-      # These are the only characters that are still specially
-      # interpreted inside of double-quoted scrings.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      case $lastarg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      # Add the previous argument to base_compile.
-      if test -z "$base_compile"; then
-	base_compile="$lastarg"
-      else
-	base_compile="$base_compile $lastarg"
-      fi
-    done
-
-    case $user_target in
-    set)
-      ;;
-    no)
-      # Get the name of the library object.
-      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-      ;;
-    *)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
-    case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    esac
-
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-    case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-    *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    # Infer tagged configuration to use if any are available and
-    # if one wasn't chosen via the "--tag" command line option.
-    # Only attempt this if the compiler in the base compile
-    # command doesn't match the default compiler.
-    if test -n "$available_tags" && test -z "$tagname"; then
-      case "$base_compile " in
-      "$CC "*) ;;
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when ltconfig was run.
-      "`$echo $CC` "*) ;;
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
-	    case "$base_compile " in
-	    "$CC "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    "`$echo $CC` "*)
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  echo "$modename: unable to infer tagged configuration"
-	  echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit 1
-#        else
-#          echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
-    lobj=${xdir}$objdir/$objname
-
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit 1" 1 2 15
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit 1" 1 2 15
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $run ln "$0" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-      echo $srcfile > "$lockfile"
-    fi
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $srcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $srcfile"
-      fi
-
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	status=$?
-	if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $status
-	fi
-      fi
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	command="$command -o $lobj"
-      fi
-
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit 1
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
-      # Allow error messages only from the first compilation.
-      suppress_output=' >/dev/null 2>&1'
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $srcfile"
-      else
-	command="$base_compile $srcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit 1
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
-    else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
-    fi
-
-    $run $mv "${libobj}T" "${libobj}"
-
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
-    fi
-
-    exit 0
-    ;;
-
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invokation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args="$nonopt"
-    base_compile="$nonopt"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    add_flags=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	else
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	fi
-	build_libtool_libs=no
-	build_old_libs=yes
-	prefer_static_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      base_compile="$base_compile $arg"
-      shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit 1
-	  fi
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat $save_arg`
-	    do
-#	      moreargs="$moreargs $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-
-	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		pic_object=
-		non_pic_object=
-
-		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
-
-		if test -z "$pic_object" || \
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
-		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit 1
-		fi
-
-		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
-
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
-		    prev=
-		  fi
-
-		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
-		  arg="$pic_object"
-		fi
-
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-
-		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit 1
-		else
-		  # Dry-run case.
-
-		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      fi
-	    done
-	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit 1
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit 1
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
-	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit 1
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  ;;
-	esac
-	continue
-	;;
-
-      -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit 1
-	  fi
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "*) ;;
-	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-mingw* | *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
-	    continue
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	deplibs="$deplibs $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit 1
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
-
-      -static)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	add_flags="$add_flags $arg"
-	;;
-
-      *.$objext)
-	# A standard object.
-	objs="$objs $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  pic_object=
-	  non_pic_object=
-
-	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
-
-	  if test -z "$pic_object" || \
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
-	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit 1
-	  fi
-
-	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
-
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
-
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
-		prev=
-		continue
-	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
-
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
-	      prev=
-	    fi
-
-	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
-	    arg="$pic_object"
-	  fi
-
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
-
-	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit 1
-	  else
-	    # Dry-run case.
-
-	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
-	  prev=
-	else
-	  deplibs="$deplibs $arg"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	add_flags="$add_flags $arg"
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done # argument parsing loop
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Infer tagged configuration to use if any are available and
-    # if one wasn't chosen via the "--tag" command line option.
-    # Only attempt this if the compiler in the base link
-    # command doesn't match the default compiler.
-    if test -n "$available_tags" && test -z "$tagname"; then
-      case $base_compile in
-      "$CC "*) ;;
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when ltconfig was run.
-      "`$echo $CC` "*) ;;
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
-	    case $base_compile in
-	    "$CC "*)
-	      # The compiler in $compile_command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    "`$echo $CC` "*)
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  echo "$modename: unable to infer tagged configuration"
-	  echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit 1
-#       else
-#         echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
-    # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      status=$?
-      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $status
-      fi
-    fi
-
-    # Determine the type of output
-    case $output in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    specialdeplibs=
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
-	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	esac
-      fi
-      libs="$libs $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if test "X$duplicate_deps" = "Xyes" ; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
-    case $linkmode in
-    lib)
-	passes="conv link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit 1
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-    for pass in $passes; do
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-	esac
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
-	    continue
-	  fi
-	  if test "$pass" = conv && test "$allow_undefined" = yes; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    # Search the libtool library
-	    lib="$searchdir/lib${name}.la"
-	    if test -f "$lib"; then
-	      found=yes
-	      break
-	    fi
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  fi
-	  ;; # -l
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    ;;
-	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la) lib="$deplib" ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    if test "$deplibs_check_method" != pass_all; then
-	      echo
-	      echo "*** Warning: Trying to link with static lib archive $deplib."
-	      echo "*** I have the capability to make that library automatically link in when"
-	      echo "*** you link to this library.  But I can only do this if you have a"
-	      echo "*** shared version of the library, which you do not appear to have"
-	      echo "*** because the file extensions .$libext of this argument makes me believe"
-	      echo "*** that it is just a static archive that I should not used here."
-	    else
-	      echo
-	      echo "*** Warning: Linking the shared library $output against the"
-	      echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      newdlfiles="$newdlfiles $deplib"
-	    fi
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  $echo "$modename: cannot find the library \`$lib'" 1>&2
-	  exit 1
-	fi
-
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit 1
-	fi
-
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variable installed.
-	installed=yes
-
-	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-	fi
-
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    #echo "Adding $deplib to \$deplibs"
-	    deplibs="$deplib $deplibs"
-            if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-            fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit 1
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit 1
-	  fi
-	  continue
-	fi # $pass = conv
-
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit 1
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit 1
-	  fi
-	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
-	  else
-	    newdlfiles="$newdlfiles $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$libdir"
-	    absdir="$libdir"
-	  fi
-	else
-	  dir="$ladir/$objdir"
-	  absdir="$abs_ladir/$objdir"
-	  # Remove this search path later
-	  notinst_path="$notinst_path $abs_ladir"
-	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit 1
-	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
-	  fi
-	  continue
-	fi
-
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var"; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $dir" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
-	  # This is a shared library
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin*)
-		major=`expr $current - $age`
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    soname=`echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$extract_expsyms_cmds\"
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$old_archive_from_expsyms_cmds\"
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
-
-	  if test "$linkmode" = prog || test "$mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit 1
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test "$linkmode" = prog || test "$mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    fi
-
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    echo
-	    echo "*** Warning: This system can not link to static lib archive $lib."
-	    echo "*** I have the capability to make that library automatically link in when"
-	    echo "*** you link to this library.  But I can only do this if you have a"
-	    echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      echo "*** But as you try to build a module library, libtool will still create "
-	      echo "*** a static module, that should work as long as the dlopening application"
-	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		echo
-		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    convenience="$convenience $dir/$old_library"
-	    old_convenience="$old_convenience $dir/$old_library"
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test "$linkmode" = lib; then
-	  #if test -n "$dependency_libs" &&
-	  #   { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
-	  #     test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
-		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  #fi
-
-	  newlib_search_path="$newlib_search_path $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="-L$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit 1
-		  fi
-		  path="-L$absdir"
-		fi
-		;;
-	      *) continue ;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$deplibs $path" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
-	      esac
-	      ;;
-	    -R*)
-	      temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	      case " $xrpath " in
-	      *" $temp_xrpath "*) ;;
-	      *) xrpath="$xrpath $temp_xrpath";;
-	      esac;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval libname=\"$libname_spec\"
-	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit 1
-	else
-	  echo
-	  echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  echo "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
-	fi
-      fi
-
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
-
-      set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
-	fi
-
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	IFS="$save_ifs"
-
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	current="$2"
-	revision="$3"
-	age="$4"
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	case $revision in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	case $age in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
-
-	irix | nonstopux)
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  major=`expr $current - $age + 1`
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux)
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  major=`expr $current - $age`
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-      fi
-
-      if test "$mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`echo "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       removelist="$removelist $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
-	deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
-	dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
-      done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-	if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
- 	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behaviour.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $rm conftest
-	  $LTCC -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	      # If $name is empty we are operating on a -L argument.
-             if test "$name" != "" && test "$name" -ne "0"; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		set dummy $deplib_matches
-		deplib_match=$2
-		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		  newdeplibs="$newdeplibs $i"
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning: dynamic linker does not accept needed library $i."
-		  echo "*** I have the capability to make that library automatically link in when"
-		  echo "*** you link to this library.  But I can only do this if you have a"
-		  echo "*** shared version of the library, which I believe you do not have"
-		  echo "*** because a test_compile did reveal that the linker did not use it for"
-		  echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  else
-	    # Error occured in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	     # If $name is empty we are operating on a -L argument.
-             if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
-		$LTCC -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
-		  ldd_output=`ldd conftest`
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    echo
-		    echo "*** Warning: dynamic linker does not accept needed library $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which you do not appear to have"
-		    echo "*** because a test_compile did reveal that the linker did not use this one"
-		    echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		  fi
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "***  make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
-	    # If $name is empty we are operating on a -L argument.
-           if test "$name" != "" && test  "$name" != "0"; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		    for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | egrep "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		    done
-	      done
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		echo "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  echo "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  echo "*** with $libname and none of the candidates passed a file format test"
-		  echo "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		for potent_lib in $potential_libs; do
-		  potlib="$potent_lib" # see symlink-check above in file_magic test
-		  if eval echo \"$potent_lib\" 2>/dev/null \
-		      | ${SED} 10q \
-		      | egrep "$match_pattern_regex" > /dev/null; then
-		    newdeplibs="$newdeplibs $a_deplib"
-		    a_deplib=""
-		    break 2
-		  fi
-		done
-	      done
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		echo "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  echo "*** with $libname and none of the candidates passed a file format test"
-		  echo "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
-	     grep . >/dev/null; then
-	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
-
-	    if test "$allow_undefined" = no; then
-	      echo
-	      echo "*** Since this library must not contain undefined symbols,"
-	      echo "*** because either the platform does not support them or"
-	      echo "*** it was explicitly requested with -no-undefined,"
-	      echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	realname="$2"
-	shift; shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
-
-	lib="$output_objdir/$realname"
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    eval cmds=\"$export_symbols_cmds\"
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd" || exit $?
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-	fi
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
-	    generated="$generated $gentop"
-
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case $xlib in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "$mkdir $xdir"
-	      $run $mkdir "$xdir"
-	      status=$?
-	      if test "$status" -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	      libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	    done
-	  fi
-	fi
-
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
-	fi
-
-	# Add all flags from the command line.  We here create a library,
-	# but those flags were only added to compile_command and
-	# finalize_command, which are only used when creating executables.
-	# So do it by hand here.
-	compiler_flags="$compiler_flags $add_flags"
-	# Only add it to commands which use CC, instead of LD, i.e.
-	# only to $compiler_flags
-	#linker_flags="$linker_flags $add_flags"
-
-	# Do each of the archive commands.
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval cmds=\"$archive_expsym_cmds\"
-	else
-	  eval cmds=\"$archive_cmds\"
-	fi
-
-	if len=`expr "X$cmds" : ".*"` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
-
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  delfiles=
-	  last_robj=
-	  k=1
-	  output=$output_objdir/$save_output-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*"` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
-	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
-	      fi
-	      last_robj=$output_objdir/$save_output-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$save_output-${k}.$objext
-	      objlist=$obj
-	      len=1
-	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
-	  # Set up a command to remove the reloadale object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
-	  done
-
-	  $echo "creating a temporary reloadable object file: $output"
-
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
-
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
-
-	  # Do each of the archive commands.
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    eval cmds=\"$archive_expsym_cmds\"
-	  else
-	    eval cmds=\"$archive_cmds\"
-	  fi
-
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~$rm $delfiles\"
-	fi
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-	  exit 0
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
-
-      case $output in
-      *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit 1
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $run $rm $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
-	else
-	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "$mkdir $gentop"
-	  $run $mkdir "$gentop"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
-	  generated="$generated $gentop"
-
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case $xlib in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "$mkdir $xdir"
-	    $run $mkdir "$xdir"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	  done
-	fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      eval cmds=\"$reload_cmds\"
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	exit 0
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
-	exit 0
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	eval cmds=\"$reload_cmds\"
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-      fi
-
-      if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
-      fi
-
-      exit 0
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
-      esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
-
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	;;
-      esac
-
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
-      fi
-
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	    else
-	      $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval 'echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit 1
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G
-      # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath.
-      # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld.
-      # This does not apply on AIX for ia64, which uses a SysV linker.
-      case "$host" in
-        ia64-*-aix5*) ;;
-        *-*-aix4* | *-*-aix5*)
-                   compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"`
-                   finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;;
-      esac
-
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	status=$?
-
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
-	fi
-
-	exit $status
-      fi
-
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$run $rm $output
-	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
-	exit 0
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
-
-      # Now create the wrapper script.
-      $show "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-	case $0 in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
-	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*) exeext=.exe ;;
-	  *) exeext= ;;
-	esac
-	$rm $output
-	trap "$rm $output; exit 1" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit 1
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# win32 systems need to use the prog path for dll
-	# lookup to work
-	*-*-cygwin* | *-*-pw32*)
-	  $echo >> $output "\
-      exec \$progdir/\$program \${1+\"\$@\"}
-"
-	  ;;
-
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \$progdir\\\\\$program \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $echo >> $output "\
-      # Export the path to the program.
-      PATH=\"\$progdir:\$PATH\"
-      export PATH
-
-      exec \$program \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-	chmod +x $output
-      fi
-      exit 0
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  #oldobjs="$oldobjs$old_deplibs $non_pic_objects"
-	  oldobjs="$old_deplibs $non_pic_objects"
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "$mkdir $gentop"
-	$run $mkdir "$gentop"
-	status=$?
-	if test "$status" -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
-	generated="$generated $gentop"
-
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case $xlib in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "$mkdir $xdir"
-	  $run $mkdir "$xdir"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
-      fi
-
-      compiler_flags="$compiler_flags $add_flags"
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	eval cmds=\"$old_archive_from_new_cmds\"
-      else
-	eval cmds=\"$old_archive_cmds\"
-
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
-	  for obj in $save_oldobjs
-	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*"` &&
-	       test "$len" -le "$max_cmd_len"; then
-	      :
-	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
-	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  eval cmds=\"\$concat_cmds~$old_archive_cmds\"
-	fi
-      fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="($relink_command; cd `pwd`; $SHELL $0 --mode=relink $libtool_args)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit 1
-		fi
-		newdependency_libs="$newdependency_libs $libdir/$name"
-		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $rm $output
-	  # place dlname in correct position for cygwin
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-	  esac
-	  $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then
-	    $echo >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      fi
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-      ;;
-    esac
-    exit 0
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg="$nonopt"
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest="$arg"
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*) ;;
-
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest="$arg"
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    continue
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  eval cmds=\"$postinstall_cmds\"
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit 0
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $wrapper ;;
-	  *) . ./$wrapper ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit 1
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-	      else
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
-	      file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyways
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      eval cmds=\"$old_postinstall_cmds\"
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $0 --finish$current_libdirs'
-    else
-      exit 0
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  eval cmds=\"$finish_cmds\"
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    exit 0
-
-    echo "----------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      echo "   $libdir"
-    done
-    echo
-    echo "If you ever happen to want to link against installed libraries"
-    echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    echo
-    echo "See any operating system documentation about shared libraries for"
-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    echo "----------------------------------------------------------------------"
-    exit 0
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit 1
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit 1
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved enviroment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit 0
-    fi
-    ;;
-
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    rmdirs=
-
-    for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
-	objdir="$objdir"
-      else
-	objdir="$dir/$objdir"
-      fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-      test "$mode" = uninstall && objdir="$dir"
-
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
-	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
-	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-	  test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-
-	  if test "$mode" = uninstall; then
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      eval cmds=\"$postuninstall_cmds\"
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      eval cmds=\"$old_postuninstall_cmds\"
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	  fi
-	fi
-	;;
-
-      *.lo)
-	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
-	  # Read the .lo file
-	  . $dir/$name
-
-	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$pic_object"
-	  fi
-
-	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$non_pic_object"
-	  fi
-	fi
-	;;
-
-      *)
-	# Do a test to see if this is a libtool program.
-	if test "$mode" = clean &&
-	   (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  relink_command=
-	  . $dir/$file
-
-	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-	  if test "$fast_install" = yes && test -n "$relink_command"; then
-	    rmfiles="$rmfiles $objdir/lt-$name"
-	  fi
-	fi
-	;;
-      esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
-    done
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
-      fi
-    done
-
-    exit $exit_status
-    ;;
-
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit 1
-    ;;
-  esac
-
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit 1
-  fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
-  exit 1
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
-  exit 0
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-  ;;
-esac
-
-echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit 0
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
-# ### BEGIN LIBTOOL TAG CONFIG: CXX
-
-# Libtool was configured on host tinbox:
-
-# Shell to use when invoking shell scripts.
-SHELL="/bin/sh"
-
-# Whether or not to build shared libraries.
-build_libtool_libs=yes
-
-# Whether or not to build static libraries.
-build_old_libs=no
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=yes
-
-# Whether or not to optimize for fast installation.
-fast_install=yes
-
-# The host system.
-host_alias=
-host=i686-pc-linux-gnu
-
-# An echo program that does not interpret backslashes.
-echo="echo"
-
-# The archiver.
-AR="ar"
-AR_FLAGS="cru"
-
-# A C compiler.
-LTCC="gcc"
-
-# A language-specific compiler.
-CC="g++"
-
-# Is the compiler the GNU C compiler?
-with_gcc=yes
-
-# The linker used to build libraries.
-LD="/usr/i586-suse-linux/bin/ld"
-
-# Whether we need hard or soft links.
-LN_S="ln -s"
-
-# A BSD-compatible nm program.
-NM="/usr/bin/nm -B"
-
-# A sed program that does not truncate output.
-SED="sed"
-
-# A symbol stripping program
-STRIP=strip
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=file
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="dlltool"
-
-# Used on cygwin: object dumper.
-OBJDUMP="objdump"
-
-# Used on cygwin: assembler.
-AS="as"
-
-# The name of the directory that contains temporary libtool files.
-objdir=.libs
-
-# How to create reloadable object files.
-reload_flag=" -r"
-reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
-
-# How to pass a linker flag through the compiler.
-wl="-Wl,"
-
-# Object file suffix (normally "o").
-objext="o"
-
-# Old archive suffix (normally "a").
-libext="a"
-
-# Executable file suffix (normally "").
-exeext=""
-
-# Additional compiler flags for building library objects.
-pic_flag=" -fPIC -DPIC"
-pic_mode=default
-
-# What is the maximum length of a command?
-max_cmd_len=32768
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o="yes"
-
-# Must we lock files when doing compilation ?
-need_locks="no"
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=no
-
-# Do we need a version for libraries?
-need_version=no
-
-# Whether dlopen is supported.
-dlopen_support=unknown
-
-# Whether dlopen of programs is supported.
-dlopen_self=unknown
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=unknown
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="-static"
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=" -fno-builtin"
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="\${wl}--export-dynamic"
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=""
-
-# Library versioning type.
-version_type=linux
-
-# Format of library name prefix.
-libname_spec="lib\$name"
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so"
-
-# The coded name of the library, if different from the real name.
-soname_spec="\${libname}\${release}.so\$major"
-
-# Commands used to build and install an old-style archive.
-RANLIB="ranlib"
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
-old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib"
-old_postuninstall_cmds=""
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=""
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=""
-
-# Commands used to build and install a shared archive.
-archive_cmds="\$CC -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
-archive_expsym_cmds="\$CC -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
-postinstall_cmds=""
-postuninstall_cmds=""
-
-# Commands to strip libraries.
-old_striplib="strip --strip-debug"
-striplib="strip --strip-unneeded"
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects="/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../crti.o /usr/lib/gcc-lib/i586-suse-linux/3.3.4/crtbeginS.o"
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects="/usr/lib/gcc-lib/i586-suse-linux/3.3.4/crtendS.o /usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../crtn.o"
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=""
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps="-lstdc++ -lm -lgcc_s -lc -lgcc_s"
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path="-L/usr/lib/gcc-lib/i586-suse-linux/3.3.4 -L/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/lib -L/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../.."
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method="pass_all"
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd="\$MAGIC_CMD"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=""
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=""
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=""
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="sed -n -e 's/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'"
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'"
-
-# This is the shared library runtime path variable.
-runpath_var=LD_RUN_PATH
-
-# This is the shared library path variable.
-shlibpath_var=LD_LIBRARY_PATH
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=no
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=immediate
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=yes
-
-# Flag to hardcode $libdir into a binary during linking.
-# This must work even if $libdir does not exist.
-hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=""
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=no
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=no
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=unknown
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-# Fix the shell variable $srcfile for the compiler.
-fix_srcfile_path=""
-
-# Set to yes if exported symbols are required.
-always_export_symbols=no
-
-# The commands to list exported symbols.
-export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols"
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=""
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=""
-
-# Symbols that must always be exported.
-include_expsyms=""
-
-# ### END LIBTOOL TAG CONFIG: CXX
-
-# ### BEGIN LIBTOOL TAG CONFIG: GCJ
-
-# Libtool was configured on host tinbox:
-
-# Shell to use when invoking shell scripts.
-SHELL="/bin/sh"
-
-# Whether or not to build shared libraries.
-build_libtool_libs=yes
-
-# Whether or not to build static libraries.
-build_old_libs=no
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=yes
-
-# Whether or not to optimize for fast installation.
-fast_install=yes
-
-# The host system.
-host_alias=
-host=i686-pc-linux-gnu
-
-# An echo program that does not interpret backslashes.
-echo="echo"
-
-# The archiver.
-AR="ar"
-AR_FLAGS="cru"
-
-# A C compiler.
-LTCC="gcc"
-
-# A language-specific compiler.
-CC="gcj"
-
-# Is the compiler the GNU C compiler?
-with_gcc=
-
-# The linker used to build libraries.
-LD=""
-
-# Whether we need hard or soft links.
-LN_S="ln -s"
-
-# A BSD-compatible nm program.
-NM="/usr/bin/nm -B"
-
-# A sed program that does not truncate output.
-SED="sed"
-
-# A symbol stripping program
-STRIP=strip
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=file
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="dlltool"
-
-# Used on cygwin: object dumper.
-OBJDUMP="objdump"
-
-# Used on cygwin: assembler.
-AS="as"
-
-# The name of the directory that contains temporary libtool files.
-objdir=.libs
-
-# How to create reloadable object files.
-reload_flag=" -r"
-reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
-
-# How to pass a linker flag through the compiler.
-wl="-Wl,"
-
-# Object file suffix (normally "o").
-objext="o"
-
-# Old archive suffix (normally "a").
-libext="a"
-
-# Executable file suffix (normally "").
-exeext=""
-
-# Additional compiler flags for building library objects.
-pic_flag=" -DPIC"
-pic_mode=default
-
-# What is the maximum length of a command?
-max_cmd_len=32768
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o="no"
-
-# Must we lock files when doing compilation ?
-need_locks="no"
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=no
-
-# Do we need a version for libraries?
-need_version=no
-
-# Whether dlopen is supported.
-dlopen_support=unknown
-
-# Whether dlopen of programs is supported.
-dlopen_self=unknown
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=unknown
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="-static"
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=" -fno-builtin"
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="\${wl}--export-dynamic"
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=""
-
-# Library versioning type.
-version_type=linux
-
-# Format of library name prefix.
-libname_spec="lib\$name"
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so"
-
-# The coded name of the library, if different from the real name.
-soname_spec="\${libname}\${release}.so\$major"
-
-# Commands used to build and install an old-style archive.
-RANLIB="ranlib"
-old_archive_cmds=""
-old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib"
-old_postuninstall_cmds=""
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=""
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=""
-
-# Commands used to build and install a shared archive.
-archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
-archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
-postinstall_cmds=""
-postuninstall_cmds=""
-
-# Commands to strip libraries.
-old_striplib="strip --strip-debug"
-striplib="strip --strip-unneeded"
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=""
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=""
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=""
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=""
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=""
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method="pass_all"
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd="\$MAGIC_CMD"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=""
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=""
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=""
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="sed -n -e 's/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'"
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'"
-
-# This is the shared library runtime path variable.
-runpath_var=LD_RUN_PATH
-
-# This is the shared library path variable.
-shlibpath_var=LD_LIBRARY_PATH
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=no
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=immediate
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=yes
-
-# Flag to hardcode $libdir into a binary during linking.
-# This must work even if $libdir does not exist.
-hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=""
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=no
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=no
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=unsupported
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=unknown
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-# Fix the shell variable $srcfile for the compiler.
-fix_srcfile_path=""
-
-# Set to yes if exported symbols are required.
-always_export_symbols=no
-
-# The commands to list exported symbols.
-export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols"
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=""
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-
-# Symbols that must always be exported.
-include_expsyms=""
-
-# ### END LIBTOOL TAG CONFIG: GCJ
-
diff --git a/malloryclient/CMakeLists.txt b/malloryclient/CMakeLists.txt
new file mode 100644
index 0000000..dee9313
--- /dev/null
+++ b/malloryclient/CMakeLists.txt
@@ -0,0 +1,36 @@
+################################################################################
+# twin-style-mallory                                                           #
+# ------------------                                                           #
+# This file is licensed under the terms of GNU GPL v3 or later.                #
+# Improvements and feedback are welcome.                                       #
+################################################################################
+
+tde_import(twin)
+
+include_directories(
+  ${CMAKE_BINARY_DIR}
+  ${CMAKE_CURRENT_BINARY_DIR}
+  ${CMAKE_CURRENT_SOURCE_DIR}
+  ${TDE_INCLUDE_DIR}
+  ${TQT_INCLUDE_DIRS}
+)
+
+link_directories(
+  ${TQT_LIBRARY_DIRS}
+  ${TDE_LIBRARY_DIRS}
+)
+
+### Libraries ##################################################################
+tde_add_kpart(twin_mallory AUTOMOC
+  SOURCES
+    malloryclient.cpp malloryhandler.cpp
+    mallorybutton.cpp pixmaps.cpp embeddata.cpp
+  LINK tdeui-shared tdecorations-shared
+  DESTINATION ${PLUGIN_INSTALL_DIR}
+)
+
+### Data #######################################################################
+tde_create_translated_desktop(
+  SOURCE mallory.desktop
+  DESTINATION ${DATA_INSTALL_DIR}/twin
+)
\ No newline at end of file
diff --git a/malloryclient/mallory.desktop b/malloryclient/mallory.desktop
index 2a82b26..b22738c 100644
--- a/malloryclient/mallory.desktop
+++ b/malloryclient/mallory.desktop
@@ -2,4 +2,4 @@
 [Desktop Entry]
 Encoding=UTF-8
 Name=Mallory
-X-TDE-Library=twin3_mallory
+X-TDE-Library=twin_mallory
diff --git a/stamp-h.in b/stamp-h.in
deleted file mode 100644
index e69de29..0000000
--- a/stamp-h.in
+++ /dev/null
diff --git a/stamp-h1 b/stamp-h1
deleted file mode 100644
index 4547fe1..0000000
--- a/stamp-h1
+++ /dev/null
@@ -1 +0,0 @@
-timestamp for config.h
diff --git a/subdirs b/subdirs
deleted file mode 100644
index fa6b51e..0000000
--- a/subdirs
+++ /dev/null
@@ -1,2 +0,0 @@
-colorscheme
-malloryclient