Initial commit

Sourced from https://www.pling.com/p/1100385

Signed-off-by: Mavridis Philippe <mavridisf@gmail.com>

1 files changed, 594 insertions, 0 deletions

diff --git a/admin/cvs.sh b/admin/cvs.sh
new file mode 100644
index 0000000..80688bc
--- /dev/null
+++ b/admin/cvs.sh
@@ -0,0 +1,594 @@
+#! /bin/sh
+#
+# cvs.sh
+#
+# This file contains support code from Makefile.common
+# It defines a shell function for each known target
+# and then does a case to call the correct function.
+
+call_and_fix_autoconf()
+{
+  $AUTOCONF || exit 1
+  if test -r configure.in.in ; then
+    perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\
+    \\n  perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\
+    \\\\\\n    || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\
+    \\n  rm -f \\\$CONFIG_STATUS.bak\\nfi\
+    \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/;" configure
+  fi
+}
+
+strip_makefile()
+{
+  if test -f $makefile_wo; then :; else
+    perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo
+  fi
+}
+
+check_autotool_versions()
+{
+AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1`
+case $AUTOCONF_VERSION in
+  Autoconf*2.5* | autoconf*2.5* ) : ;;
+  "" )
+    echo "*** AUTOCONF NOT FOUND!."
+    echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"
+    exit 1
+    ;;
+  * )
+    echo "*** YOU'RE USING $AUTOCONF_VERSION."
+    echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"
+    exit 1
+    ;;
+esac
+ 
+AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1`
+case $AUTOHEADER_VERSION in
+  Autoconf*2.5* | autoheader*2.5* ) : ;;
+  "" )
+    echo "*** AUTOHEADER NOT FOUND!."
+    echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"
+    exit 1
+    ;;
+  * )
+    echo "*** YOU'RE USING $AUTOHEADER_VERSION."
+    echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"
+    exit 1
+    ;;
+esac
+
+AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1`
+case $AUTOMAKE_STRING in
+  automake*1.5d* | automake*1.5* | automake*1.5-* )
+    echo "*** YOU'RE USING $AUTOMAKE_STRING."
+    echo "*** KDE requires automake 1.6.1 or newer"
+    exit 1
+    ;;
+  automake*1.6.* | automake*1.7* ) : ;;
+  "" )
+    echo "*** AUTOMAKE NOT FOUND!."
+    echo "*** KDE requires automake 1.6.1 or newer"
+    exit 1
+    ;;
+  unsermake* ) :
+    echo "*** YOU'RE USING UNSERMAKE."
+    echo "*** GOOD LUCK!! :)"
+    ;;
+  * )
+    echo "*** YOU'RE USING $AUTOMAKE_STRING."
+    echo "*** KDE requires automake 1.6"
+    exit 1
+    ;;
+esac
+}
+
+cvs()
+{
+check_autotool_versions
+ 
+### Produce acinclude.m4
+if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
+  echo "*** Creating acinclude.m4"
+  rm -f acinclude.m4 configure.files
+  
+  strip_makefile
+  $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4
+fi
+
+### Make new subdirs and configure.in.
+### The make calls could be optimized away here,
+### with a little thought.
+if test -r configure.in.in; then
+    rm -f configure.in
+    echo "*** Creating list of subdirectories"
+    create_subdirs
+
+    if test -r Makefile.am.in; then
+        echo "*** Creating Makefile.am"
+        if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then 
+            strip_makefile
+            $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1
+        else
+            Makefile_am
+        fi
+     fi
+     echo "*** Creating configure.in"
+     configure_files
+     strip_makefile
+     $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1
+fi
+
+echo "*** Creating aclocal.m4"
+$ACLOCAL || exit 1
+echo "*** Creating configure"
+call_and_fix_autoconf
+
+if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
+  echo "*** Creating config.h template"
+  $AUTOHEADER || exit 1
+fi
+
+echo "*** Creating Makefile templates"
+$AUTOMAKE || exit 1
+if test -z "$UNSERMAKE"; then
+  echo "*** Postprocessing Makefile templates"
+  perl -w admin/am_edit || exit 1
+fi
+
+if egrep "^cvs-local:" $makefile_am >/dev/null; then \
+  strip_makefile
+  $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1
+fi
+
+echo "*** Creating date/time stamp"
+touch stamp-h.in
+
+echo "*** Finished"
+echo "    Don't forget to run ./configure"
+echo "    If you haven't done so in a while, run ./configure --help"
+}
+
+dist()
+{
+check_autotool_versions
+
+###
+### First build all of the files necessary to do just "make"
+###
+if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
+  strip_makefile
+  $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4
+fi
+if test -r configure.in.in; then
+  create_subdirs
+  Makefile_am
+  configure_files
+  strip_makefile
+  $MAKE -f $makefile_wo top_srcdir=. ./configure.in
+fi
+$ACLOCAL
+$AUTOHEADER
+$AUTOMAKE --foreign --include-deps
+perl -w admin/am_edit
+call_and_fix_autoconf
+touch stamp-h.in
+if grep "^cvs-local:" $makefile_am >/dev/null; then
+  strip_makefile
+  $MAKE -f $makefile_wo cvs-local top_srcdir=.
+fi
+
+###
+### Then make messages
+###
+if test -d po; then
+ LIST=`find ./po -name "*.po"`
+ for i in $LIST; do
+  file2=`echo $i | sed -e "s#\.po#\.gmo#"`
+  msgfmt -o $file2 $i || touch $file2
+ done
+fi
+if grep "^cvs-dist-local:" $makefile_am >/dev/null; then
+  strip_makefile
+  $MAKE -f $makefile_wo cvs-dist-local top_srcdir=.
+fi
+}
+
+subdir_dist()
+{
+$ACLOCAL
+$AUTOHEADER
+$AUTOMAKE
+perl -w ../admin/am_edit
+call_and_fix_autoconf
+touch stamp-h.in
+}
+
+configure_in()
+{
+rm -f configure.in configure.in.new
+kde_use_qt_param=
+test -f configure.files || { echo "need configure.files for configure.in"; exit 1; }
+cat `fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` > configure.in.new
+echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new
+if test -f Makefile.am.in; then
+  subdirs=`cat subdirs`
+  for dir in $subdirs; do
+    dir=`echo $dir | sed -e "s,[-+.],_,g"`
+    echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new
+  done
+fi
+
+echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new
+if test -n "$UNSERMAKE"; then
+  echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new
+  echo "AC_CONFIG_FILES([ Makefile.calls ])" >> configure.in.new
+fi
+
+if test -f inst-apps; then
+    topleveldirs=`cat inst-apps`
+else
+    topleveldirs=
+    for dir in `ls -1d * | sort`; do
+	if test "$dir" != "debian" && test -d $dir; then
+	    topleveldirs="$topleveldirs $dir"
+	fi
+    done
+fi
+
+for topleveldir in $topleveldirs; do 
+  if test -f $topleveldir/configure.in; then
+	continue
+  fi
+  if test -f $topleveldir/Makefile.am; then :; else
+	continue
+  fi
+
+  mfs=`find $topleveldir -name Makefile.am -print | fgrep -v "/." | \
+       sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'`
+  for i in $mfs; do
+     echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new
+     if test -n "$UNSERMAKE"; then
+        echo "AC_CONFIG_FILES([ $i.rules ])" >> configure.in.new
+	echo "AC_CONFIG_FILES([ $i.calls ])" >> configure.in.new
+     fi
+  done
+done
+
+files=`cat configure.files`
+list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"`
+for file in $list; do 
+    echo "AC_CONFIG_FILES([ $file ])" >>  configure.in.new
+done
+
+if test -n "$UNSERMAKE"; then
+  echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new
+fi
+
+midfiles=`cat configure.files | fgrep "configure.in.mid"`
+test -n "$midfiles" && cat $midfiles >> configure.in.new
+
+echo "AC_OUTPUT" >> configure.in.new
+modulename=
+if test -f configure.in.in; then
+   if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then
+      kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"`
+   fi
+   if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then
+      line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in`
+      if test -n "$line"; then
+	  modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"`
+	  VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"`
+      fi
+      sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \
+          configure.in.new > configure.in && mv configure.in configure.in.new
+   fi
+fi
+if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then
+     VERSION="\"3.1.0\""
+fi
+if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then
+   modulename=`pwd`; 
+   modulename=`basename $modulename`
+   esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"`
+   modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"`   
+
+fi
+if test -n "$kde_use_qt_param"; then
+      sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \
+      	configure.in.new > configure.in && mv configure.in configure.in.new
+fi
+sed -e "s#@MODULENAME@#$modulename#" configure.in.new |
+	sed -e "s#@VERSION@#$VERSION#" > configure.in
+botfiles=`cat configure.files | egrep "configure.in.bot"`
+test -n "$botfiles" && cat $botfiles >> configure.in
+cat $admindir/configure.in.bot.end >> configure.in
+rm -f configure.in.new
+}
+
+configure_files()
+{
+admindir=NO
+for i in . .. ../.. ../../..; do
+  if test -x $i/admin; then admindir=$i/admin; break; fi
+done
+rm -f configure.files
+touch configure.files
+if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then
+	echo $admindir/configure.in.min >> configure.files
+fi
+test -f configure.in.in && echo configure.in.in >> configure.files
+# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs
+if test -f inst-apps; then
+   inst=`cat inst-apps`
+   list=""
+   for i in $inst; do
+      list="$list `find $i/ -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \
+		sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`"
+   done
+else
+   list=`find . -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \
+		sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`
+fi
+for i in $list; do if test -f $i && test `dirname $i` != "." ; then
+  echo $i >> configure.files
+fi; done
+test -f configure.in.mid && echo configure.in.mid >> configure.files
+test -f configure.in.bot && echo configure.in.bot >> configure.files
+}
+
+create_subdirs()
+{
+if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then 
+    # as many modules contain rules to create subdirs without any
+    # dependencies make won't create it unless there is no file.
+    # so we check if that's a dummy rule or one that works
+    rm -f subdirs.cvs.sh.$$
+    if test -f subdirs; then
+	mv subdirs subdirs.cvs.sh.$$
+    fi
+    strip_makefile
+    $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1
+    if test -f subdirs.cvs.sh.$$; then
+	if test -s subdirs; then
+	    rm subdirs.cvs.sh.$$ 
+	else
+	    mv subdirs.cvs.sh.$$ subdirs
+	fi
+    fi
+else
+    subdirs
+fi
+}
+
+subdirs()
+{
+dirs=
+idirs=
+if test -f inst-apps; then
+   idirs=`cat inst-apps`
+else
+   idirs=`ls -1 | sort`
+fi
+
+compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1`
+compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1`
+for i in $idirs; do
+    if test -f $i/Makefile.am; then
+       case " $compilefirst $compilelast " in
+         *" $i "*) ;;
+         *) dirs="$dirs $i"
+       esac
+    fi
+done
+
+: > ./_SUBDIRS
+
+for d in $compilefirst; do
+   echo $d >> ./_SUBDIRS
+done
+
+(for d in $dirs; do 
+   list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1`
+   for s in $list; do
+      echo $s $d
+   done
+   list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1`
+   for s in $list; do
+      echo $d $s
+   done
+   echo $d $d
+done ) | tsort >> ./_SUBDIRS
+
+for d in $compilelast; do
+   echo $d >> ./_SUBDIRS
+done
+
+if test -r subdirs && cmp -s subdirs _SUBDIRS; then
+    rm -f _SUBDIRS
+fi
+test -r _SUBDIRS && mv _SUBDIRS subdirs || true
+}
+
+Makefile_am()
+{
+if test -f Makefile.am.in; then
+  compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1`
+  compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1`
+
+  idirs=
+  dirs=
+  if test -f inst-apps; then
+     idirs=`cat inst-apps`
+  else
+     idirs=`cat subdirs`
+  fi
+  for i in $idirs; do
+    case " $compilefirst $compilelast " in
+      *" $i "*) ;;
+      *) dirs="$dirs $i"
+    esac
+  done
+
+  if test -n "$UNSERMAKE"; then
+    cp Makefile.am.in Makefile.am
+    topsubdirs=
+    for i in $compilefirst $dirs $compilelast; do
+       vari=`echo $i | sed -e "s,[-+],_,g"`
+       echo "if $vari""_SUBDIR_included" >> Makefile.am
+       echo "$vari""_SUBDIR=$i" >> Makefile.am
+       echo "endif" >> Makefile.am
+       topsubdirs="$topsubdirs \$($vari""_SUBDIR)"
+    done
+    echo "SUBDIRS=$topsubdirs" >> Makefile.am
+  else
+    cat Makefile.am.in | \
+        sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \
+        sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am
+    echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am
+  fi
+fi
+}
+
+cvs_clean()
+{
+if test -d CVS; then :; else
+  echo "You don't have a toplevel CVS directory."
+  echo "You most certainly didn't use cvs to get these sources."
+  echo "But this function depends on cvs's information."
+  exit 1
+fi
+perl $admindir/cvs-clean.pl
+}
+
+package_merge()
+{
+catalogs=$POFILES
+for cat in $catalogs; do
+  msgmerge -o $cat.new $cat $PACKAGE.pot
+  if test -s $cat.new; then
+    grep -v "\"POT-Creation" $cat.new > $cat.new.2
+    grep -v "\"POT-Creation" $cat >> $cat.new.1
+    if diff $cat.new.1 $cat.new.2; then
+	rm $cat.new
+    else
+	mv $cat.new $cat
+    fi
+    rm -f $cat.new.1 $cat.new.2
+  fi
+done
+}
+
+package_messages()
+{
+rm -rf po.backup
+mkdir po.backup
+
+for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
+  egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i
+  cp po/$i po.backup/backup_$i
+  touch -r po/$i po.backup/backup_$i
+  rm po/$i
+done
+
+podir=${podir:-$PWD/po}
+files=`find . -name Makefile.am | xargs egrep -l '^messages:' `
+dirs=`for i in $files; do echo \`dirname $i\`; done`
+tmpname="$PWD/messages.log"
+if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi
+if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi
+export EXTRACTRC PREPARETIPS
+
+for subdir in $dirs; do
+  test -z "$VERBOSE" || echo "Making messages in $subdir"
+  (cd $subdir
+   if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then
+	$EXTRACTRC *.rc *.ui > rc.cpp
+   else
+	candidates=`ls -1 *.rc *.ui 2>/dev/null`
+	if test -n "$candidates"; then
+	    echo "$subdir has *.rc or *.ui files, but not correct messages line"
+	fi
+   fi
+   if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then
+	echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp
+   else echo " " > _translatorinfo.cpp
+   fi
+   perl -e '$mes=0; while (<STDIN>) { next if (/^(if|else|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile
+
+   $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \
+	XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-${KDEDIR:-/usr/local/kde}/include}/kde.pot" \
+	messages 
+   exit_code=$?
+   if test "$exit_code" != 0; then
+       echo "make exit code: $exit_code"
+   fi
+   ) 2>&1 | grep -v '^make\[1\]' > $tmpname
+   test -s $tmpname && { echo $subdir ; cat "$tmpname"; }
+   test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp
+   rm -f $subdir/_translatorinfo.cpp
+   rm -f $subdir/_transMakefile
+done
+rm -f $tmpname
+for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do
+  test -f po/$i || echo "disappeared: $i"
+done
+for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
+   msgmerge -q -o po/$i po/$i po/$i
+   egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot
+  if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then
+	echo "will update $i"
+	msgmerge -q po.backup/backup_$i po/$i > temp.pot
+	mv temp.pot po/$i
+  else
+    if test -f po.backup/backup_$i; then
+      test -z "$VERBOSE" || echo "I'm restoring $i"
+      mv po.backup/backup_$i po/$i
+      rm po.backup/$i
+    else
+      echo "will add $i"
+    fi
+  fi
+done
+rm -f temp.pot
+rm -rf po.backup
+}
+
+unset CDPATH
+admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'`
+test "x$admindir" = "x$0" && admindir=.
+
+test "x$MAKE" = x && MAKE=make
+makefile_am=Makefile.am
+makefile_wo=Makefile.am
+if test -f Makefile.am.in; then
+  makefile_am=Makefile.am.in
+  makefile_wo=Makefile.am.in.wo
+fi
+
+# Suck in the AUTOCONF detection code
+. $admindir/detect-autoconf.sh
+
+###
+### Main
+###
+
+arg=`echo $1 | tr '\-.' __`
+case $arg in
+  cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \
+  cvs_clean | package_merge | package_messages | Makefile_am ) $arg ;;
+  configure ) call_and_fix_autoconf ;;
+  * ) echo "Usage: cvs.sh <target>"
+      echo "Target can be one of:"
+      echo "    cvs cvs-clean dist"
+      echo "    configure.in configure.files"
+      echo "    package-merge package-messages"
+      echo ""
+      echo "Usage: anything but $1"
+      exit 1 ;;
+esac
+
+if test -f Makefile.am.in.wo; then
+  rm Makefile.am.in.wo
+fi
+
+exit 0