Second part of prior commit

1 files changed, 0 insertions, 925 deletions

diff --git a/tde-i18n-zh_TW/messages/kdeutils/kcmlaptop.po b/tde-i18n-zh_TW/messages/kdeutils/kcmlaptop.po
deleted file mode 100644
index 912e7035ae5..00000000000
--- a/tde-i18n-zh_TW/messages/kdeutils/kcmlaptop.po
+++ /dev/null
@@ -1,925 +0,0 @@
-# translation of kcmlaptop.po to Chinese Traditional
-# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
-msgid ""
-msgstr ""
-"Project-Id-Version: kcmlaptop\n"
-"POT-Creation-Date: 2006-10-14 02:36+0200\n"
-"PO-Revision-Date: 2006-10-16 12:51+0800\n"
-"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
-"dot tw>\n"
-"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.11.4\n"
-
-#: battery.cpp:72
-msgid "&Show battery monitor"
-msgstr "顯示電池監控器(&S)"
-
-#: battery.cpp:74
-msgid "This box enables the battery state icon in the panel"
-msgstr "開啟這個選項的話，可以在面板中顯示目前電池的狀態。"
-
-#: battery.cpp:79
-msgid "Show battery level percentage"
-msgstr "顯示電池電量百分比"
-
-#: battery.cpp:81
-msgid ""
-"This box enables a text message near the battery state icon containing battery "
-"level percentage"
-msgstr "開啟這個選項的話，會在面板中的電池圖示附近顯示的電量的百分比。"
-
-#: battery.cpp:84
-msgid "&Notify me whenever my battery becomes fully charged"
-msgstr "當電池充滿時通知我(&N)"
-
-#: battery.cpp:86
-msgid ""
-"This box enables a dialog box that pops up when your battery becomes fully "
-"charged"
-msgstr "開啟這個選項的話，會在電池充飽的時候，跳出一個視窗來通知您。"
-
-#: battery.cpp:89
-msgid "&Use a blank screen saver when running on battery"
-msgstr "當用電池供電時，把螢幕保護程式改成空白(&U)"
-
-#: battery.cpp:103
-msgid "&Check status every:"
-msgstr "每多久檢查一次狀態(&C)："
-
-#: battery.cpp:105
-msgid ""
-"Choose how responsive the laptop software will be when it checks the battery "
-"status"
-msgstr "選擇要多久檢查一次電池的狀態。"
-
-#: battery.cpp:106
-msgid ""
-"_: keep short, unit in spinbox\n"
-"sec"
-msgstr "秒"
-
-#: battery.cpp:114
-msgid "Select Battery Icons"
-msgstr "選擇電池圖示"
-
-#: battery.cpp:125
-msgid "No &battery"
-msgstr "沒有電池(&B)"
-
-#: battery.cpp:126
-msgid "&Not charging"
-msgstr "不在充電(&N)"
-
-#: battery.cpp:127
-msgid "Char&ging"
-msgstr "正在充電(&G)"
-
-#: battery.cpp:143
-msgid "Current Battery Status"
-msgstr "目前電池狀態"
-
-#: battery.cpp:174
-msgid ""
-"This panel controls whether the battery status monitor\n"
-"appears in the system tray and what it looks like."
-msgstr "這個面板控制電池的狀態和監控器是否嵌入到系統匣中，及如何顯示。"
-
-#: battery.cpp:180
-msgid "&Start Battery Monitor"
-msgstr "開始監控電池(&S)"
-
-#: battery.cpp:276
-msgid ""
-"<h1>Laptop Battery</h1>This module allows you to monitor your batteries. To "
-"make use of this module, you must have power management system software "
-"installed. (And, of course, you should have batteries in your machine.)"
-msgstr "<h1>電池監視器</h1>這個模組可以讓您監視電池。要使用這個模組，您必須安裝電源管理系統的軟體。當然，您的機器內必須安裝電池。"
-
-#: battery.cpp:286
-msgid ""
-"<qt>The battery monitor has been started, but the tray icon is currently "
-"disabled.  You can make it appear by selecting the <b>Show battery monitor</b> "
-"entry on this page and applying your changes.</qt>"
-msgstr "<qt>電池監視器已經開始，但目前系統匣圖示是關閉的。您可以用<b>顯示電池監視器</b>來開啟系統匣圖示。</qt>"
-
-#: battery.cpp:361
-msgid "Present"
-msgstr "存在"
-
-#: battery.cpp:367
-msgid "Not present"
-msgstr "不存在"
-
-#: main.cpp:155
-msgid "&Battery"
-msgstr "電池(&B)"
-
-#: main.cpp:159
-msgid "&Power Control"
-msgstr "電源控制(&P)"
-
-#: main.cpp:163
-msgid "Low Battery &Warning"
-msgstr "低電位警告(&W)"
-
-#: main.cpp:167
-msgid "Low Battery &Critical"
-msgstr "低電位嚴重警告(&C)"
-
-#: main.cpp:179
-msgid "Default Power Profiles"
-msgstr "預設的電源設定"
-
-#: main.cpp:186
-msgid "Button Actions"
-msgstr "按鈕動作"
-
-#: main.cpp:193
-msgid "&ACPI Config"
-msgstr "ACPI 設定(&A)"
-
-#: main.cpp:200
-msgid "&APM Config"
-msgstr "APM 設定(&A)"
-
-#: main.cpp:217
-msgid "&Sony Laptop Config"
-msgstr "Sony 筆記型電腦設定(&S)"
-
-#: main.cpp:227
-msgid "Laptop Battery Configuration"
-msgstr "電池設定"
-
-#: main.cpp:228
-msgid "Battery Control Panel Module"
-msgstr "電池控制面板模組"
-
-#: main.cpp:230
-msgid "(c) 1999 Paul Campbell"
-msgstr "(c) 1999 Paul Campbell"
-
-#: main.cpp:292
-msgid ""
-"<h1>Laptop Battery</h1>This module allows you to monitor your batteries. To "
-"make use of this module, you must have power management software installed. "
-"(And, of course, you should have batteries in your machine.)"
-msgstr "<h1>電池監視器</h1>這個模組可以讓您監視電池。要使用這個模組，您必須安裝電源管理系統的軟體。當然，您的機器內必須安裝電池。"
-
-#: pcmcia.cpp:44
-msgid "kcmlaptop"
-msgstr "kcmlaptop"
-
-#: pcmcia.cpp:45
-msgid "KDE Panel System Information Control Module"
-msgstr "KDE 面板系統資訊控制模組"
-
-#: pcmcia.cpp:47
-msgid "(c) 1999 - 2002 Paul Campbell"
-msgstr "(c) 1999 - 2002 Paul Campbell"
-
-#: pcmcia.cpp:85
-msgid "Version: "
-msgstr "版本："
-
-#: pcmcia.cpp:118
-msgid ""
-"<h1>PCMCIA Config</h1>This module shows information about the PCMCIA cards in "
-"your system, if there are PCMCIA cards."
-msgstr "<h1>PCMCIA 設定</h1>這個模組可以讓您顯示您系統上安裝的 PCMCIA 卡片資訊。"
-
-#: power.cpp:123 profile.cpp:76
-msgid "Not Powered"
-msgstr "沒有電源狀態下"
-
-#: power.cpp:124
-msgid ""
-"Options in this box apply when the laptop is unplugged from the wall and has "
-"been idle for a while"
-msgstr "這裡的選項會在電腦未插電並且停留一陣子之後啟用。"
-
-#: buttons.cpp:128 power.cpp:129 warning.cpp:241
-msgid "Standb&y"
-msgstr "待命(&Y)"
-
-#: power.cpp:130 power.cpp:223
-msgid "Causes the laptop to change to a standby temporary-low power state"
-msgstr "讓電腦切換到低耗電待命的狀態。"
-
-#: buttons.cpp:132 power.cpp:133 warning.cpp:247
-msgid "&Suspend"
-msgstr "暫停(&S)"
-
-#: power.cpp:134 power.cpp:227
-msgid "Causes the laptop to change to a suspend 'save-to-ram' state"
-msgstr "讓電腦進入暫停狀態並把目前狀態存到 RAM 中。"
-
-#: buttons.cpp:136 power.cpp:137 warning.cpp:253
-msgid "H&ibernate"
-msgstr "冬眠(&I)"
-
-#: power.cpp:138 power.cpp:231
-msgid "Causes the laptop to change to a hibernate 'save-to-disk' state"
-msgstr "讓電腦進入冬眠狀態，並把目前狀態儲存在磁碟中。"
-
-#: power.cpp:141 power.cpp:234
-msgid "None"
-msgstr "無"
-
-#: buttons.cpp:150 buttons.cpp:226 power.cpp:143 power.cpp:236
-msgid "Brightness"
-msgstr "亮度"
-
-#: power.cpp:144 power.cpp:237
-msgid "Enables changing the laptop's back panel brightness"
-msgstr "開啟以便調整電腦背板的亮度。"
-
-#: power.cpp:149 power.cpp:242
-msgid "How bright to change the back panel"
-msgstr "要將背板調整到多亮"
-
-#: buttons.cpp:164 buttons.cpp:240 power.cpp:158 power.cpp:251 profile.cpp:102
-#: profile.cpp:165 warning.cpp:192
-msgid "System performance"
-msgstr "系統效能"
-
-#: power.cpp:159 power.cpp:252
-msgid "Enables changing the laptop's performance profile"
-msgstr "開啟以便調整電腦的效能設定"
-
-#: power.cpp:164 power.cpp:257
-msgid "Which profile to change it to"
-msgstr "要使用哪種設定"
-
-#: buttons.cpp:178 buttons.cpp:254 power.cpp:173 power.cpp:266 profile.cpp:184
-msgid "CPU throttle"
-msgstr "CPU 效能上限 (throttle)"
-
-#: power.cpp:174 power.cpp:267
-msgid "Enables throttling the laptop's CPU"
-msgstr "開啟這個選項以便調整電腦 CPU 的效能上限 (throttle)"
-
-#: power.cpp:179 power.cpp:272
-msgid "How much to throttle the laptop's CPU"
-msgstr "要將 CPU 效能上限調到多少"
-
-#: power.cpp:195 power.cpp:285
-msgid "Don't act if LAV is >"
-msgstr "如果系統平均負擔大於多少時則停止動作"
-
-#: power.cpp:198 power.cpp:288
-msgid ""
-"If enabled and the system load average is greater than this value none of the "
-"above options will be applied"
-msgstr "如果開啟這個選項的話，在系統平均負擔大於特定值以上時，則以上的選項將不會被套用。"
-
-#: power.cpp:204
-msgid "&Wait for:"
-msgstr "等待(&W)："
-
-#: power.cpp:206 power.cpp:296
-msgid "How long the computer has to be idle before these values take effect"
-msgstr "電腦要等待多久才會開始套用這些數值"
-
-#: power.cpp:207 power.cpp:297 warning.cpp:81 warning.cpp:101
-msgid ""
-"_: keep short, unit in spinbox\n"
-"min"
-msgstr "分鐘"
-
-#: power.cpp:216 profile.cpp:140
-msgid "Powered"
-msgstr "有電源狀態下："
-
-#: power.cpp:218
-msgid ""
-"Options in this box apply when the laptop is plugged into the wall and has been "
-"idle for a while"
-msgstr "這裡的選項會在電腦插上電源並且停留一陣子之後啟用。"
-
-#: buttons.cpp:204 power.cpp:222
-msgid "Sta&ndby"
-msgstr "待命(&N)"
-
-#: buttons.cpp:208 power.cpp:226
-msgid "S&uspend"
-msgstr "暫停(&U)"
-
-#: buttons.cpp:212 power.cpp:230
-msgid "Hi&bernate"
-msgstr "冬眠(&B)"
-
-#: power.cpp:294
-msgid "Wai&t for:"
-msgstr "等待(&T)："
-
-#: power.cpp:304
-msgid ""
-"This panel configures the behavior of the automatic power-down feature - it "
-"works as a sort of extreme screen saver. You can configure different timeouts "
-"and types of behavior depending on whether or not your laptop is plugged in to "
-"the mains supply."
-msgstr "這個面板控制自動關機功能─像一種超級螢幕保護程式。您可以針對使用市電或電池以設置不同的延遲時間。"
-
-#: power.cpp:312
-msgid ""
-"Different laptops may respond to 'standby' in different ways - in many it is "
-"only a temporary state and may not be useful for you."
-msgstr "不同的筆記電腦有不同的「待命」方式─它可能只是是一個臨時狀態，不一定對您有用。"
-
-#: acpi.cpp:148 apm.cpp:144 buttons.cpp:281 power.cpp:320 profile.cpp:216
-#: sony.cpp:102 warning.cpp:291
-#, c-format
-msgid "Version: %1"
-msgstr "版本：%1"
-
-#: power.cpp:581
-msgid ""
-"<h1>Laptop Power Control</h1>This module allows you to control the power "
-"settings of your laptop and set timouts that will trigger state changes you can "
-"use to save power"
-msgstr "<h1>筆記型電腦電源控制</h1>這個模組可以讓您控制筆記型電腦的電源設定，並設定各種狀態啟用的條件以節省電力。"
-
-#: warning.cpp:78 warning.cpp:79
-msgid "Critical &trigger:"
-msgstr "觸發低電位嚴重警告(&T)："
-
-#: warning.cpp:82 warning.cpp:85 warning.cpp:102 warning.cpp:105
-msgid ""
-"When this amount of battery life is left the actions below will be triggered"
-msgstr "當電池電源剩多少時，觸發嚴重警告。"
-
-#: warning.cpp:84 warning.cpp:104
-#, c-format
-msgid ""
-"_: keep short, unit in spinbox\n"
-"%"
-msgstr "%"
-
-#: warning.cpp:98 warning.cpp:99
-msgid "Low &trigger:"
-msgstr "觸發低電位警告(&T)："
-
-#: warning.cpp:121
-msgid "Run &command:"
-msgstr "執行命令(&C)"
-
-#: warning.cpp:133
-msgid "This command will be run when the battery gets low"
-msgstr "當電池電位過低時執行命令。"
-
-#: warning.cpp:136
-msgid "&Play sound:"
-msgstr "播放聲音(&P)："
-
-#: warning.cpp:148
-msgid "This sound will play when the battery gets low"
-msgstr "當電池電位過低時播放聲音。"
-
-#: warning.cpp:151
-msgid "System &beep"
-msgstr "系統響鈴(&B)"
-
-#: warning.cpp:154
-msgid "The system will beep if this is enabled"
-msgstr "開啟這個選項的話，系統會響鈴。"
-
-#: warning.cpp:156
-msgid "&Notify"
-msgstr "通知(&N)"
-
-#: warning.cpp:166
-msgid "Panel b&rightness"
-msgstr "面板亮度(&R)"
-
-#: warning.cpp:168
-msgid "If enabled the back panel brightness will change"
-msgstr "開啟這個選項的話會改變背板的亮度。"
-
-#: warning.cpp:174
-msgid "How bright or dim to make the back panel"
-msgstr "要將背板調整到多亮"
-
-#: warning.cpp:193
-msgid "If enabled the laptop's power performance profile will change"
-msgstr "開啟這個選項以改變電腦的電源效能設定。"
-
-#: warning.cpp:202
-msgid "The performance profile to change to"
-msgstr "電源效能設定改為"
-
-#: profile.cpp:121 warning.cpp:215
-msgid "CPU throttling"
-msgstr "CPU 效能上限"
-
-#: warning.cpp:216
-msgid "If enabled the CPU performance will be throttled"
-msgstr "開啟這個選項的話，會控制 CPU 的效能上限。"
-
-#: warning.cpp:225
-msgid "How much to throttle the CPU performance by"
-msgstr "要將 CPU 效能上限調整為多少"
-
-#: warning.cpp:237
-msgid "System State Change"
-msgstr "系統狀態改變"
-
-#: warning.cpp:238
-msgid "You may choose one of the following to occur when the battery gets low"
-msgstr "您可以選擇在電池電位過低時要啟用哪種狀態。"
-
-#: warning.cpp:242
-msgid "Move the system into the standby state - a temporary lower power state"
-msgstr "將系統切入待命(standby)狀態─暫時性的省電模式。"
-
-#: warning.cpp:248
-msgid "Move the system into the suspend state - also known as 'save-to-ram'"
-msgstr "將系統切入暫停(suspend)狀態─又稱 save-to-ram，將目前狀態存入 RAM 中。"
-
-#: warning.cpp:254
-msgid "Move the system into the hibernate state - also known as 'save-to-disk'"
-msgstr "將系統切入冬眠(hibernate)狀態─又稱 save-to-disk，將目前狀態存入磁碟中。"
-
-#: warning.cpp:259
-msgid "&Logout"
-msgstr "登出(&L)"
-
-#: buttons.cpp:140 buttons.cpp:216 warning.cpp:262
-msgid "System power off"
-msgstr "關閉系統"
-
-#: warning.cpp:263
-msgid "Power the laptop off"
-msgstr "關閉電腦"
-
-#: warning.cpp:266
-msgid "&None"
-msgstr "無(&N)"
-
-#: warning.cpp:275
-msgid ""
-"This panel controls how and when you receive warnings that your battery power "
-"is going to run out VERY VERY soon."
-msgstr "這個面板控制電池「即將」用完時如何處理。"
-
-#: warning.cpp:277
-msgid ""
-"This panel controls how and when you receive warnings that your battery power "
-"is about to run out"
-msgstr "這個面板控制電池快用完時如何處理。"
-
-#: warning.cpp:570 warning.cpp:587
-msgid "Only local files are currently supported."
-msgstr "目前只支援本地端檔案。"
-
-#: warning.cpp:598
-msgid ""
-"<h1>Low battery Warning</h1>This module allows you to set an alarm in case your "
-"battery's charge is about to run out."
-msgstr "<h1>低電位警告</h1>這個模組可以讓您設定當電池電量不足時的警告。"
-
-#: acpi.cpp:64
-msgid ""
-"This panel provides information about your system's ACPI implementation and "
-"lets you have access to some of the extra features provided by ACPI"
-msgstr "這個面板提供關於您電腦的 ACPI 資訊，並讓您調整 ACPI 提供的一些額外功能。"
-
-#: acpi.cpp:69
-msgid ""
-"NOTE: the Linux ACPI implementation is still a 'work in progress'. Some "
-"features, in particular suspend and hibernate are not yet available under 2.4 - "
-"and under 2.5 some particular ACPI implementations are still unstable, these "
-"check boxes let you only enable the things that work reliably. You should test "
-"these features very gingerly - save all your work, check them on and try a "
-"suspend/standby/hibernate from the popup menu on the battery icon in the panel "
-"if it fails to come back successfully uncheck the box again."
-msgstr ""
-"注意：Linux ACPI 實作還在實驗中。有些功能，特別是暫停(suspend)與冬眠(hibernate)在 2.4 版核心中尚未支援。另外在 2.5 "
-"版核心中某些版本的 ACPI "
-"還不穩定，這裡只讓您開啟部份穩定的功能選項。您必須非常小心的測試這些功能─儲存好您的工作，再試試從電池面板圖示的目錄中開啟暫停/待命/冬眠等功能。如果有問題的話"
-"，取消這些功能。"
-
-#: acpi.cpp:79 apm.cpp:77
-msgid ""
-"Some changes made on this page may require you to quit the laptop panel and "
-"start it again to take effect"
-msgstr "您改變的部份設定需要請您先離開面板並重新啟動。"
-
-#: acpi.cpp:85 apm.cpp:83
-msgid "Enable standby"
-msgstr "開啟待命狀態"
-
-#: acpi.cpp:87 apm.cpp:85
-msgid ""
-"If checked this box enables transitions to the 'standby' state - a temporary "
-"powered down state"
-msgstr "開啟這個選項讓系統可以切入待命(standby)的狀態。"
-
-#: acpi.cpp:91 apm.cpp:89
-msgid "Enable &suspend"
-msgstr "開啟暫停狀態(&S)"
-
-#: acpi.cpp:93 apm.cpp:91
-msgid ""
-"If checked this box enables transitions to the 'suspend' state - a semi-powered "
-"down state, sometimes called 'suspend-to-ram'"
-msgstr "開啟這個選項讓系統可以切入暫停(suspend)的狀態。"
-
-#: acpi.cpp:98
-msgid "Enable &hibernate"
-msgstr "開啟冬眠狀態(&H)"
-
-#: acpi.cpp:100
-msgid ""
-"If checked this box enables transitions to the 'hibernate' state - a powered "
-"down state, sometimes called 'suspend-to-disk'"
-msgstr "開啟這個選項讓系統可以切入冬眠(hibernate)的狀態。"
-
-#: acpi.cpp:105
-msgid "Use software suspend for hibernate"
-msgstr "使用軟體暫停(software suspend)來執行冬眠功能"
-
-#: acpi.cpp:107
-msgid ""
-"If checked this box enables transitions to the 'hibernate' state - a powered "
-"down state, sometimes called 'suspend-to-disk' - the kernel 'Software Suspend' "
-"mechanism will be used instead of using ACPI directly"
-msgstr "開啟這個選項的話，會用核心中的「軟體暫停」(Software Suspend)機制而不用 ACPI 的控制來執行冬眠狀態。"
-
-#: acpi.cpp:117
-msgid "Enable &performance profiles"
-msgstr "開啟效能設定(&P)"
-
-#: acpi.cpp:119
-msgid ""
-"If checked this box enables access to ACPI performance profiles - usually OK in "
-"2.4 and later"
-msgstr "開啟這個選項以便設定 ACPI 效能設定。通常在 2.4 版以後的核心都可以使用。"
-
-#: acpi.cpp:123
-msgid "Enable &CPU throttling"
-msgstr "開啟 CPU 效能上限(&C)"
-
-#: acpi.cpp:125
-msgid ""
-"If checked this box enables access to ACPI throttle speed changes - usually OK "
-"in 2.4 and later"
-msgstr "開啟這個選項以便設定 ACPI 對 CPU 效能上限的控制。通常在 2.4 版以後的核心都可以使用。"
-
-#: acpi.cpp:129
-msgid ""
-"If the above boxes are disabled then there is no 'helper' application set up to "
-"help change ACPI states, there are two ways you can enable this application, "
-"either make the file /proc/acpi/sleep writeable by anyone every time your "
-"system boots or use the button below to make the KDE ACPI helper application "
-"set-uid root"
-msgstr ""
-"如果以上的選項都關閉，則沒有其他應用程式可以改變 ACPI 狀態。這種狀況下有兩個方法，一個是在開機時將 /proc/acpi/sleep "
-"檔設定為所有人都可以讀寫，或是用底下的按鈕將 KDE ACPI 設定程式設為 set-uid root。"
-
-#: acpi.cpp:138 apm.cpp:107
-msgid "Setup Helper Application"
-msgstr "設定 ACPI 設定應用程式"
-
-#: acpi.cpp:140
-msgid "This button can be used to enable the ACPI helper application"
-msgstr "這個按鈕可以開啟 ACPI 設定應用程式"
-
-#: acpi.cpp:169 apm.cpp:191
-msgid ""
-"The %1 application does not seem to have the same size or checksum as when it "
-"was compiled we do NOT recommend you proceed with making it setuid-root without "
-"further investigation"
-msgstr "%1 這個軟體的大小或是檢查碼不正確。我們不建議在您弄清楚怎麼回事之前就將此軟體設定為 setuid-root."
-
-#: acpi.cpp:172 acpi.cpp:182 acpi.cpp:194 apm.cpp:174 apm.cpp:194 apm.cpp:204
-#: apm.cpp:216 sony.cpp:115 sony.cpp:127
-msgid "KLaptopDaemon"
-msgstr "KLaptopDaemon"
-
-#: acpi.cpp:172 apm.cpp:194
-msgid "Run Nevertheless"
-msgstr "還是要做"
-
-#: acpi.cpp:180 apm.cpp:202
-msgid ""
-"You will need to supply a root password to allow the privileges of the "
-"klaptop_acpi_helper to change."
-msgstr "您需要輸入 root 的密碼。"
-
-#: acpi.cpp:193
-msgid ""
-"The ACPI helper cannot be enabled because tdesu cannot be found.  Please make "
-"sure that it is installed correctly."
-msgstr "ACPI 設定程式無法開啟，因為找不到 tdesu 這支程式。請確定您的 KDE 有正確安裝。"
-
-#: acpi.cpp:276
-msgid ""
-"<h1>ACPI Setup</h1>This module allows you to configure ACPI for your system"
-msgstr "<h1>設定 ACPI</h1>這個模組可以讓您控制電腦的 ACPI 設定。"
-
-#: sony.cpp:69
-msgid ""
-"This panel allows you to control some of the features of the\n"
-"'sonypi' device for your laptop - you should not enable the options below if "
-"you\n"
-"also use the 'sonypid' program in your system"
-msgstr "這個面板讓您控制您的電腦中 sonypi 設備的某些功能。如果您已經使用 sonypid 這支程式，請不要打開此選項。"
-
-#: sony.cpp:73
-msgid "Enable &scroll bar"
-msgstr "開啟捲軸(&S)"
-
-#: sony.cpp:74
-msgid "When checked this box enables the scrollbar so that it works under KDE"
-msgstr "開啟這個選項可以在 KDE 下使用捲軸功能。"
-
-#: sony.cpp:78
-msgid "&Emulate middle mouse button with scroll bar press"
-msgstr "按下捲軸時模擬滑鼠中鍵功能(&E)"
-
-#: sony.cpp:79
-msgid ""
-"When checked this box enables pressing the scroll bar to act in the same way as "
-"pressing the middle button on a 3 button mouse"
-msgstr "開啟這個選項的話，按住捲軸的行為就會跟按下滑鼠中鍵一樣。"
-
-#: sony.cpp:88
-msgid ""
-"The /dev/sonypi is not accessable, if you wish to use the above features its\n"
-"protections need to be changed. Clicking on the button below will change them\n"
-msgstr ""
-"/dev/sonypi 無法存取。如果您要使用這個功能，請改變它的權限。按下底下的按鈕可以改變其權限。\n"
-
-#: sony.cpp:91
-msgid "Setup /dev/sonypi"
-msgstr "設定 /dev/sonypi"
-
-#: sony.cpp:93
-msgid "This button can be used to enable the sony specific features"
-msgstr "這個按鈕可以開啟 sony 特殊功能設定。"
-
-#: sony.cpp:113
-msgid ""
-"You will need to supply a root password to allow the protections of /dev/sonypi "
-"to be changed."
-msgstr "您需要 root 密碼才能改變 /dev/sonypi 權限。"
-
-#: sony.cpp:126
-msgid ""
-"The /dev/sonypi protections cannot be changed because tdesu cannot be found.  "
-"Please make sure that it is installed correctly."
-msgstr "/dev/sonypi 權限無法改變，因為找不到 tdesu 這支程式。請確定您的 KDE 有正確安裝。"
-
-#: sony.cpp:187
-msgid ""
-"<h1>Sony Laptop Hardware Setup</h1>This module allows you to configure some "
-"Sony laptop hardware for your system"
-msgstr "<h1>Sony 筆記型電腦設定</h1>這個模組可以讓您設定部份 Sony 筆記型電腦硬體。"
-
-#: profile.cpp:77
-msgid ""
-"Items in this box take effect whenever the laptop is unplugged from the wall"
-msgstr "這裡的選項會在電腦不使用插座電源時啟動。"
-
-#: profile.cpp:81 profile.cpp:145
-msgid "Back panel brightness"
-msgstr "背板亮度"
-
-#: profile.cpp:82 profile.cpp:146
-msgid "Enables the changing of the back panel brightness"
-msgstr "開啟這個選項以改變背板亮度"
-
-#: profile.cpp:89 profile.cpp:153
-msgid "How bright it should be when it is changed"
-msgstr "要設定為多亮"
-
-#: profile.cpp:103 profile.cpp:166
-msgid "Enables the changing of the system performance profile"
-msgstr "開啟以改變系統效能設定"
-
-#: profile.cpp:108 profile.cpp:173
-msgid "The new system performance profile to change to"
-msgstr "新的系統效能設定為"
-
-#: profile.cpp:122 profile.cpp:185
-msgid "Enables the throttling of the CPU performance"
-msgstr "開啟以改變 CPU 效能上限"
-
-#: profile.cpp:129 profile.cpp:192
-msgid "How much to throttle the CPU by"
-msgstr "CPU 效能上限設定為"
-
-#: profile.cpp:141
-msgid ""
-"Items in this box take effect whenever the laptop is plugged into the wall"
-msgstr "這裡的選項會在電腦使用插座電源時啟動。"
-
-#: profile.cpp:205
-msgid ""
-"This panel allows you to set default values for system attributes so that they "
-"change when the laptop is plugged in to the wall or running on batteries."
-msgstr "這個面板讓您設定系統屬性的預設值，在電腦電源切換時可以應用。"
-
-#: profile.cpp:211
-msgid ""
-"You can also set options for these values that will be set by low battery "
-"conditions, or system inactivity in the other panels"
-msgstr "您也可以在其他面板設定電腦在低電位狀態，或是系統不動作時的值。"
-
-#: profile.cpp:411
-msgid ""
-"<h1>Laptop Power Profile Setup</h1>This module allows you to configure default "
-"values for static laptop system attributes that will change when the laptop is "
-"plugged in or unplugged from the wall."
-msgstr "<h1>筆記型電腦電源控制設定</h1>這個模組讓您設定系統屬性的預設值，在電腦電源切換時可以應用。"
-
-#: buttons.cpp:122
-msgid "Lid Switch Closed"
-msgstr "關上螢幕的設定"
-
-#: buttons.cpp:124
-msgid "Select which actions will occur when the laptop's lid is closed"
-msgstr "選擇在電腦關上螢幕時要執行的動作"
-
-#: buttons.cpp:129 buttons.cpp:205
-msgid "Causes the laptop to move into the standby temporary low-power state"
-msgstr "將電腦切換到待命(standby)狀態。"
-
-#: buttons.cpp:133 buttons.cpp:209
-msgid "Causes the laptop to move into the suspend 'save-to-ram' state"
-msgstr "將電腦切換到暫停(suspend)狀態。"
-
-#: buttons.cpp:137 buttons.cpp:213
-msgid "Causes the laptop to move into the hibernate 'save-to-disk' state"
-msgstr "將電腦切換到冬眠(hibernate)狀態。"
-
-#: buttons.cpp:141 buttons.cpp:217
-msgid "Causes the laptop to power down"
-msgstr "將電腦電源關閉。"
-
-#: buttons.cpp:144 buttons.cpp:220
-msgid "Logout"
-msgstr "登出"
-
-#: buttons.cpp:145 buttons.cpp:221
-msgid "Causes you to be logged out"
-msgstr "讓您登出。"
-
-#: buttons.cpp:148
-msgid "&Off"
-msgstr "關閉(&O)"
-
-#: buttons.cpp:151 buttons.cpp:227
-msgid "Causes the back panel brightness to be set"
-msgstr "設定背板亮度"
-
-#: buttons.cpp:157 buttons.cpp:232
-msgid "How bright the back panel will be set to"
-msgstr "背板亮度要設定為"
-
-#: buttons.cpp:165 buttons.cpp:241
-msgid "Causes the performance profile to be changed"
-msgstr "更換效能設定"
-
-#: buttons.cpp:170 buttons.cpp:246
-msgid "The performance profile to switch to"
-msgstr "效能設定要切換為"
-
-#: buttons.cpp:179 buttons.cpp:255
-msgid "Causes the CPU to be throttled back"
-msgstr "設定 CPU 效能上限"
-
-#: buttons.cpp:184 buttons.cpp:260
-msgid "How much to throttle back the CPU"
-msgstr "要將 CPU 效能上限設定為"
-
-#: buttons.cpp:198
-msgid "Power Switch Pressed"
-msgstr "按下電腦電源鍵"
-
-#: buttons.cpp:200
-msgid ""
-"Select which actions will occur when the laptop's power button is pressed"
-msgstr "選擇按下電腦電源鍵時要做的動作。"
-
-#: buttons.cpp:224
-msgid "O&ff"
-msgstr "關閉(&F)"
-
-#: buttons.cpp:272
-msgid ""
-"This panel enables actions that are triggered when the lid closure switch or "
-"power switch on your laptop is pressed. Some laptops may already automatically "
-"do things like this, if you cannot disable them in your BIOS you probably "
-"should not enable anything in this panel."
-msgstr ""
-"這個面板開啟在關上螢幕或是切換電源時要啟動的動作。有些電腦可能會自己做一些動作，如果您無法從 BIOS 關閉的話您可能最好不要開啟這個面板上的任何設定。"
-
-#: buttons.cpp:614
-msgid ""
-"<h1>Laptop Power Control</h1>This module allows you to configure the power "
-"switch or lid closure switch on your laptop so they can trigger system actions"
-msgstr "<h1>筆記型電腦電源控制</h1>這個模組可以讓您設定電源切換或是關上螢幕時啟動的動作。"
-
-#: apm.cpp:64
-msgid ""
-"This panel lets you configure your APM system and lets you have access to some "
-"of the extra features provided by it"
-msgstr "這個面板讓您設定您的 APM 系統，並讓您能存取它提供的額外功能。"
-
-#: apm.cpp:69
-msgid ""
-"NOTE: some APM implementations have buggy suspend/standby implementations. You "
-"should test these features very gingerly - save all your work, check them on "
-"and try a suspend/standby from the popup menu on the battery icon in the panel "
-"if it fails to come back successfully uncheck the box again."
-msgstr ""
-"注意：有些 APM 實作暫停/待命狀態時是有問題的。您必須非常小心的測試這些功能─儲存好您的工作，再試試從電池圖示的目錄中開啟暫停/待命功能。"
-
-#: apm.cpp:98
-msgid ""
-"If the above boxes are disabled then there is no 'helper' application set up to "
-"help change APM states, there are two ways you can enable this application, "
-"either make the file /proc/apm writeable by anyone every time your system boots "
-"or use the button below to make the %1 application set-uid root"
-msgstr ""
-"如果以上的選項都關閉，則沒有其他應用程式可以改變 APM 狀態。這種狀況下有兩個方法，一個是在開機時將 /proc/apm "
-"檔設定為所有人都可以讀寫，或是用底下的按鈕將 %1 程式設為 set-uid root。"
-
-#: apm.cpp:109
-msgid "This button can be used to enable the APM helper application"
-msgstr "這個按鈕可以開啟 APM 設定應用程式"
-
-#: apm.cpp:114
-msgid ""
-"Your system seems to have 'Software Suspend' installed, this can be used to "
-"hibernate or 'suspend to disk' your system if you want to use this for "
-"hibernation check the box below"
-msgstr "您的系統上有安裝軟體暫停功能，您可以勾選來使用它讓系統進入冬眠(hibernate)狀態。"
-
-#: apm.cpp:119
-msgid "Enable software suspend for hibernate"
-msgstr "冬眠時使用軟體暫停模式"
-
-#: apm.cpp:121
-msgid ""
-"If checked this box enables transitions to the 'hibernate' state using the "
-"'Software Suspend' mechanism"
-msgstr "開啟這個選項的話，會使用軟體暫停(Software Suspend)來進入冬眠模式。"
-
-#: apm.cpp:124
-msgid ""
-"If the above box is disabled then you need to be logged in as root or need a "
-"helper application to invoke the Software Suspend utility - KDE provides a "
-"utility to do this, if you wish to use it you must make it set-uid root, the "
-"button below will do this for you"
-msgstr ""
-"如果關閉以上的選項，您需要登入為 root 或一支可以叫出軟體暫停功能的程式。KDE 有提供這樣的功能，如果您要使用 KDE 提供的功能，您必須將它設定為 "
-"setuid root。底下的按鈕可以提供您更改其權限。"
-
-#: apm.cpp:132
-msgid "Setup SS Helper Application"
-msgstr "設定軟體暫停應用程式"
-
-#: apm.cpp:134
-msgid ""
-"This button can be used to enable the Software Suspend helper application"
-msgstr "這個按鈕可以開啟軟體暫停設定程式。"
-
-#: apm.cpp:160
-msgid ""
-"You will need to supply a root password to allow the privileges of the %1 "
-"application to change."
-msgstr "您需要 root 密碼才能改變 %1 的權限。"
-
-#: apm.cpp:173
-msgid ""
-"%1 cannot be enabled because tdesu cannot be found.  Please make sure that it "
-"is installed correctly."
-msgstr "%1 無法開啟，因為找不到 tdesu 這支程式。請確定您的 KDE 有正確安裝。"
-
-#: apm.cpp:215
-msgid ""
-"The Software Suspend helper cannot be enabled because tdesu cannot be found.  "
-"Please make sure that it is installed correctly."
-msgstr "無法開啟軟體暫停設定，因為找不到 tdesu 這支程式。請確定您的 KDE 有正確安裝。"
-
-#: apm.cpp:279
-msgid ""
-"<h1>APM Setup</h1>This module allows you to configure APM for your system"
-msgstr "<h1>APM 設定</h1>這個模組讓您設定 APM。"
-
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Frank Weng (a.k.a. Franklin)"
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "franklin at goodhorse dot idv dot tw"